* [PATCH v1] ARM: dts: imx: Fix iMX6QDL DHCOM PDK2 DTC Warnings
@ 2022-04-26 22:29 Marcel Ziswiler
2022-04-26 22:56 ` Marek Vasut
2022-04-27 2:49 ` Fabio Estevam
0 siblings, 2 replies; 9+ messages in thread
From: Marcel Ziswiler @ 2022-04-26 22:29 UTC (permalink / raw)
To: u-boot
Cc: Marcel Ziswiler, Fabio Estevam, Marek Vasut,
NXP i.MX U-Boot Team, Simon Glass, Stefano Babic, Tom Rini
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Currently, compiling any i.MX 6 based target results in the following
warning:
w+arch/arm/dts/imx6q-dhcom-pdk2.dtb: Warning (pwms_property):
/display-bl:pwms: cell 3 is not a phandle reference
w+arch/arm/dts/imx6q-dhcom-pdk2.dtb: Warning (pwms_property):
/display-bl: Missing property '#pwm-cells' in node
/soc/bus@2000000/gpc@20dc000 or bad phandle (referred from pwms[3])
w+arch/arm/dts/imx6dl-dhcom-pdk2.dtb: Warning (pwms_property):
/display-bl:pwms: cell 3 is not a phandle reference
w+arch/arm/dts/imx6dl-dhcom-pdk2.dtb: Warning (pwms_property):
/display-bl: Missing property '#pwm-cells' in node
/soc/bus@2000000/gpc@20dc000 or bad phandle (referred from pwms[3])
This is due to the imx6qdl-dhcom-pdk2.dtsi using a later pwm-cells of 3
(e.g. the one with the last cell indicating whether or not it is
inverted) then what U-Boot's current imx6qdl.dtsi has. Unfortunately,
fixing aka synchronising that one as well would lead to further issues:
w+arch/arm/dts/imx6dl-aristainetos2c_cslb_7.dtb: Warning
(pwms_property): /backlight:pwms: property size (12) too small for cell
size 3
w+arch/arm/dts/imx6dl-brppt2.dtb: Warning (pwms_property):
/backlight:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6dl-cubox-i.dtb: Warning (pwms_property):
/pwmleds/front:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6dl-aristainetos2c_7.dtb: Warning (pwms_property):
/backlight:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6dl-cubox-i-emmc-som-v15.dtb: Warning (pwms_property):
/pwmleds/front:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6dl-cubox-i-som-v15.dtb: Warning (pwms_property):
/pwmleds/front:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6dl-icore.dtb: Warning (pwms_property):
/backlight-lvds:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6dl-icore-mipi.dtb: Warning (pwms_property):
/backlight-lvds:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6dl-sabreauto.dtb: Warning (pwms_property):
/backlight:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6dl-sabresd.dtb: Warning (pwms_property):
/backlight-lvds:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6q-cubox-i.dtb: Warning (pwms_property):
/pwmleds/front:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6q-cubox-i-emmc-som-v15.dtb: Warning (pwms_property):
/pwmleds/front:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6q-cubox-i-som-v15.dtb: Warning (pwms_property):
/pwmleds/front:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6q-icore.dtb: Warning (pwms_property):
/backlight-lvds:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6q-icore-mipi.dtb: Warning (pwms_property):
/backlight-lvds:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6q-logicpd.dtb: Warning (pwms_property):
/backlight-lvds:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6q-novena.dtb: Warning (pwms_property):
/backlight:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6q-phytec-mira-rdk-nand.dtb: Warning (pwms_property):
/backlight:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6q-sabreauto.dtb: Warning (pwms_property):
/backlight:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6q-sabresd.dtb: Warning (pwms_property):
/backlight-lvds:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6qp-sabreauto.dtb: Warning (pwms_property):
/backlight:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6qp-sabresd.dtb: Warning (pwms_property):
/backlight-lvds:pwms: property size (12) too small for cell size 3
Messing with all those so late in the game does not seem like too good
of an idea. Therefore, I suggest reverting just that one PWM node for
now. We may (and really should) properly synchronise all i.MX 6 DTs
again in the next cycle.
Fixes: 8ed378ff78d1 ("ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi b/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi
index bf6b3a5ce0..9dcb37ec7e 100644
--- a/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi
+++ b/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi
@@ -25,7 +25,7 @@
compatible = "pwm-backlight";
default-brightness-level = <8>;
enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; /* GPIO G */
- pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>;
+ pwms = <&pwm1 0 50000>;
status = "okay";
};
--
2.34.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v1] ARM: dts: imx: Fix iMX6QDL DHCOM PDK2 DTC Warnings
2022-04-26 22:29 [PATCH v1] ARM: dts: imx: Fix iMX6QDL DHCOM PDK2 DTC Warnings Marcel Ziswiler
@ 2022-04-26 22:56 ` Marek Vasut
2022-04-26 23:02 ` Tom Rini
2022-04-26 23:04 ` Marcel Ziswiler
2022-04-27 2:49 ` Fabio Estevam
1 sibling, 2 replies; 9+ messages in thread
From: Marek Vasut @ 2022-04-26 22:56 UTC (permalink / raw)
To: Marcel Ziswiler, u-boot
Cc: Marcel Ziswiler, Fabio Estevam, NXP i.MX U-Boot Team,
Simon Glass, Stefano Babic, Tom Rini
On 4/27/22 00:29, Marcel Ziswiler wrote:
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> Currently, compiling any i.MX 6 based target results in the following
> warning:
Oh no.
[...]
> arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi b/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi
> index bf6b3a5ce0..9dcb37ec7e 100644
> --- a/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi
> +++ b/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi
> @@ -25,7 +25,7 @@
> compatible = "pwm-backlight";
> default-brightness-level = <8>;
> enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; /* GPIO G */
> - pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>;
> + pwms = <&pwm1 0 50000>;
I think just pick Linux
fa28d8212ede ("ARM: dts: imx: default to #pwm-cells = <3> in the SoC
dtsi files")
That should fix it.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v1] ARM: dts: imx: Fix iMX6QDL DHCOM PDK2 DTC Warnings
2022-04-26 22:56 ` Marek Vasut
@ 2022-04-26 23:02 ` Tom Rini
2022-04-26 23:04 ` Marcel Ziswiler
1 sibling, 0 replies; 9+ messages in thread
From: Tom Rini @ 2022-04-26 23:02 UTC (permalink / raw)
To: Marek Vasut, Stefano Babic
Cc: Marcel Ziswiler, u-boot, Marcel Ziswiler, Fabio Estevam,
NXP i.MX U-Boot Team, Simon Glass, Stefano Babic
[-- Attachment #1: Type: text/plain, Size: 1090 bytes --]
On Wed, Apr 27, 2022 at 12:56:31AM +0200, Marek Vasut wrote:
> On 4/27/22 00:29, Marcel Ziswiler wrote:
> > From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> >
> > Currently, compiling any i.MX 6 based target results in the following
> > warning:
>
> Oh no.
>
> [...]
>
> > arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi b/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi
> > index bf6b3a5ce0..9dcb37ec7e 100644
> > --- a/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi
> > +++ b/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi
> > @@ -25,7 +25,7 @@
> > compatible = "pwm-backlight";
> > default-brightness-level = <8>;
> > enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; /* GPIO G */
> > - pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>;
> > + pwms = <&pwm1 0 50000>;
>
> I think just pick Linux
>
> fa28d8212ede ("ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi
> files")
We've just done -rc1, there should be time for re-syncing things.
--
Tom
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v1] ARM: dts: imx: Fix iMX6QDL DHCOM PDK2 DTC Warnings
2022-04-26 22:56 ` Marek Vasut
2022-04-26 23:02 ` Tom Rini
@ 2022-04-26 23:04 ` Marcel Ziswiler
2022-04-26 23:55 ` Marek Vasut
1 sibling, 1 reply; 9+ messages in thread
From: Marcel Ziswiler @ 2022-04-26 23:04 UTC (permalink / raw)
To: marex, u-boot; +Cc: festevam, sjg, uboot-imx, sbabic, trini
On Wed, 2022-04-27 at 00:56 +0200, Marek Vasut wrote:
> On 4/27/22 00:29, Marcel Ziswiler wrote:
> > From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> >
> > Currently, compiling any i.MX 6 based target results in the following
> > warning:
>
> Oh no.
>
> [...]
>
> > arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi b/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi
> > index bf6b3a5ce0..9dcb37ec7e 100644
> > --- a/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi
> > +++ b/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi
> > @@ -25,7 +25,7 @@
> > compatible = "pwm-backlight";
> > default-brightness-level = <8>;
> > enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; /* GPIO G */
> > - pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>;
> > + pwms = <&pwm1 0 50000>;
>
> I think just pick Linux
>
> fa28d8212ede ("ARM: dts: imx: default to #pwm-cells = <3> in the SoC
> dtsi files")
>
>
> That should fix it.
Yes, and breaks everything else.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v1] ARM: dts: imx: Fix iMX6QDL DHCOM PDK2 DTC Warnings
2022-04-26 23:04 ` Marcel Ziswiler
@ 2022-04-26 23:55 ` Marek Vasut
2022-04-27 0:46 ` Fabio Estevam
0 siblings, 1 reply; 9+ messages in thread
From: Marek Vasut @ 2022-04-26 23:55 UTC (permalink / raw)
To: Marcel Ziswiler, u-boot; +Cc: festevam, sjg, uboot-imx, sbabic, trini
On 4/27/22 01:04, Marcel Ziswiler wrote:
> On Wed, 2022-04-27 at 00:56 +0200, Marek Vasut wrote:
>> On 4/27/22 00:29, Marcel Ziswiler wrote:
>>> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>>>
>>> Currently, compiling any i.MX 6 based target results in the following
>>> warning:
>>
>> Oh no.
>>
>> [...]
>>
>>> arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi | 2 +-
>>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi b/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi
>>> index bf6b3a5ce0..9dcb37ec7e 100644
>>> --- a/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi
>>> +++ b/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi
>>> @@ -25,7 +25,7 @@
>>> compatible = "pwm-backlight";
>>> default-brightness-level = <8>;
>>> enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; /* GPIO G */
>>> - pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>;
>>> + pwms = <&pwm1 0 50000>;
>>
>> I think just pick Linux
>>
>> fa28d8212ede ("ARM: dts: imx: default to #pwm-cells = <3> in the SoC
>> dtsi files")
>>
>>
>> That should fix it.
>
> Yes, and breaks everything else.
Ouch ... so what did Linux do about that breakage ?
btw the polarity flag is correct, the PWM is really inverted.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v1] ARM: dts: imx: Fix iMX6QDL DHCOM PDK2 DTC Warnings
2022-04-26 23:55 ` Marek Vasut
@ 2022-04-27 0:46 ` Fabio Estevam
0 siblings, 0 replies; 9+ messages in thread
From: Fabio Estevam @ 2022-04-27 0:46 UTC (permalink / raw)
To: Marek Vasut; +Cc: Marcel Ziswiler, u-boot, sjg, uboot-imx, sbabic, trini
Hi Marek,
On Tue, Apr 26, 2022 at 8:55 PM Marek Vasut <marex@denx.de> wrote:
> Ouch ... so what did Linux do about that breakage ?
Linux treats the third pwm cell as optional.
Please see:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h=v5.18-rc4&id=83af24027b3df1af5c5a9aa9adcdcfeb3429d3be
It seems we need of_pwm_xlate_with_flags() ported to U-Boot.
Thanks
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v1] ARM: dts: imx: Fix iMX6QDL DHCOM PDK2 DTC Warnings
2022-04-26 22:29 [PATCH v1] ARM: dts: imx: Fix iMX6QDL DHCOM PDK2 DTC Warnings Marcel Ziswiler
2022-04-26 22:56 ` Marek Vasut
@ 2022-04-27 2:49 ` Fabio Estevam
2022-04-27 7:53 ` Marek Vasut
1 sibling, 1 reply; 9+ messages in thread
From: Fabio Estevam @ 2022-04-27 2:49 UTC (permalink / raw)
To: Marcel Ziswiler
Cc: U-Boot-Denx, Marcel Ziswiler, Marek Vasut, NXP i.MX U-Boot Team,
Simon Glass, Stefano Babic, Tom Rini
[-- Attachment #1: Type: text/plain, Size: 551 bytes --]
Hi Marcel,
On Tue, Apr 26, 2022 at 7:29 PM Marcel Ziswiler <marcel@ziswiler.com> wrote:
> Messing with all those so late in the game does not seem like too good
> of an idea. Therefore, I suggest reverting just that one PWM node for
> now. We may (and really should) properly synchronise all i.MX 6 DTs
> again in the next cycle.
I did an attempt to sync the imx6 dts with Linux and generated the
attached patch.
It builds the dtb's cleanly.
Boot tested only on a imx6q-sabresd.
I can send it after 2022.07 is released.
Regards,
Fabio Estevam
[-- Attachment #2: 0001-sync.patch --]
[-- Type: text/x-patch, Size: 429279 bytes --]
From b29e690c55690ae52e2af95fcc795e8ca3ecae62 Mon Sep 17 00:00:00 2001
From: Fabio Estevam <festevam@gmail.com>
Date: Tue, 26 Apr 2022 23:43:36 -0300
Subject: [PATCH] imx6: Sync device tree with Linux 5.18-rc4
Sync device tree with Linux 5.18-rc4.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
arch/arm/dts/imx6-logicpd-baseboard.dtsi | 12 +-
arch/arm/dts/imx6-logicpd-som.dtsi | 4 +
arch/arm/dts/imx6dl-brppt2.dts | 2 +
arch/arm/dts/imx6dl-mamoj.dts | 273 +++++-
arch/arm/dts/imx6dl-mba6.dtsi | 10 +-
arch/arm/dts/imx6dl-mba6a.dts | 15 +-
arch/arm/dts/imx6dl-mba6b.dts | 15 +-
arch/arm/dts/imx6dl-nitrogen6x.dts | 12 +-
arch/arm/dts/imx6dl-riotboard.dts | 2 +
arch/arm/dts/imx6dl-sabreauto.dts | 15 +
arch/arm/dts/imx6dl-tqma6a.dtsi | 12 +-
arch/arm/dts/imx6dl-tqma6b.dtsi | 12 +-
arch/arm/dts/imx6dl.dtsi | 13 +-
arch/arm/dts/imx6q-b450v3.dts | 19 +-
arch/arm/dts/imx6q-b650v3.dts | 17 +-
arch/arm/dts/imx6q-b850v3.dts | 23 +-
arch/arm/dts/imx6q-ba16.dtsi | 18 +-
arch/arm/dts/imx6q-bx50v3.dtsi | 61 +-
arch/arm/dts/imx6q-cm-fx6.dts | 112 ++-
arch/arm/dts/imx6q-icore-ofcap10.dts | 28 +-
arch/arm/dts/imx6q-logicpd.dts | 18 +-
arch/arm/dts/imx6q-marsboard.dts | 2 +-
arch/arm/dts/imx6q-mba6.dtsi | 32 +-
arch/arm/dts/imx6q-mba6a.dts | 14 +-
arch/arm/dts/imx6q-mba6b.dts | 14 +-
arch/arm/dts/imx6q-mccmon6.dts | 213 +++--
arch/arm/dts/imx6q-nitrogen6x.dts | 12 +-
arch/arm/dts/imx6q-novena.dts | 42 +-
arch/arm/dts/imx6q-phytec-mira-rdk-nand.dts | 3 +
arch/arm/dts/imx6q-sabrelite.dts | 52 +-
arch/arm/dts/imx6q-tbs2910.dts | 9 +-
arch/arm/dts/imx6q-tqma6a.dtsi | 12 +-
arch/arm/dts/imx6q-tqma6b.dtsi | 11 +-
arch/arm/dts/imx6q.dtsi | 36 +-
.../arm/dts/imx6qdl-aristainetos2-common.dtsi | 1 +
arch/arm/dts/imx6qdl-cubox-i.dtsi | 5 +-
arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi | 6 +-
arch/arm/dts/imx6qdl-dhcom-som.dtsi | 8 +-
arch/arm/dts/imx6qdl-gw51xx.dtsi | 7 +-
arch/arm/dts/imx6qdl-gw52xx.dtsi | 10 +-
arch/arm/dts/imx6qdl-gw53xx.dtsi | 22 +-
arch/arm/dts/imx6qdl-gw54xx.dtsi | 22 +-
arch/arm/dts/imx6qdl-gw551x.dtsi | 7 +-
arch/arm/dts/imx6qdl-gw552x.dtsi | 29 +-
arch/arm/dts/imx6qdl-gw553x.dtsi | 5 +-
arch/arm/dts/imx6qdl-gw560x.dtsi | 14 +-
arch/arm/dts/imx6qdl-gw5903.dtsi | 6 -
arch/arm/dts/imx6qdl-gw5904.dtsi | 27 +-
arch/arm/dts/imx6qdl-gw5907.dtsi | 9 +-
arch/arm/dts/imx6qdl-gw5910.dtsi | 7 -
arch/arm/dts/imx6qdl-gw5912.dtsi | 22 +-
arch/arm/dts/imx6qdl-gw5913.dtsi | 10 +-
arch/arm/dts/imx6qdl-hummingboard2.dtsi | 2 +-
arch/arm/dts/imx6qdl-icore.dtsi | 19 +-
arch/arm/dts/imx6qdl-mba6.dtsi | 599 +++++++++---
arch/arm/dts/imx6qdl-mba6a.dtsi | 35 +-
arch/arm/dts/imx6qdl-mba6b.dtsi | 40 +-
arch/arm/dts/imx6qdl-nitrogen6x.dtsi | 733 +++++++++++++--
arch/arm/dts/imx6qdl-phytec-mira.dtsi | 32 +-
arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi | 30 +-
arch/arm/dts/imx6qdl-pico.dtsi | 226 ++++-
arch/arm/dts/imx6qdl-sabreauto.dtsi | 119 ++-
arch/arm/dts/imx6qdl-sabrelite.dtsi | 874 ++++++++++++-----
arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi | 6 +
arch/arm/dts/imx6qdl-sabresd.dtsi | 214 +++--
arch/arm/dts/imx6qdl-sr-som-ti.dtsi | 1 +
arch/arm/dts/imx6qdl-sr-som.dtsi | 22 +-
arch/arm/dts/imx6qdl-tqma6.dtsi | 326 +++----
arch/arm/dts/imx6qdl-tqma6a.dtsi | 46 +-
arch/arm/dts/imx6qdl-tqma6b.dtsi | 28 +-
arch/arm/dts/imx6qdl-udoo.dtsi | 2 +
arch/arm/dts/imx6qdl-wandboard-revd1.dtsi | 2 -
arch/arm/dts/imx6qdl-wandboard.dtsi | 102 +-
arch/arm/dts/imx6qdl.dtsi | 190 ++--
arch/arm/dts/imx6qp-sabreauto.dts | 7 +-
arch/arm/dts/imx6qp-sabresd.dts | 10 +-
arch/arm/dts/imx6qp.dtsi | 3 +-
arch/arm/dts/imx6sl-evk.dts | 183 ++--
arch/arm/dts/imx6sl.dtsi | 348 ++++---
arch/arm/dts/imx6sll-evk.dts | 879 +++++++-----------
arch/arm/dts/imx6sll.dtsi | 445 +++++----
arch/arm/dts/imx6sx-sabreauto.dts | 623 ++++++++++---
arch/arm/dts/imx6sx-sdb.dts | 8 +-
arch/arm/dts/imx6sx-sdb.dtsi | 56 +-
arch/arm/dts/imx6sx-softing-vining-2000.dts | 50 +-
arch/arm/dts/imx6sx-udoo-neo.dtsi | 74 ++
arch/arm/dts/imx6sx.dtsi | 127 ++-
arch/arm/dts/imx6ul-14x14-evk.dtsi | 161 +++-
arch/arm/dts/imx6ul-geam.dts | 363 +++++++-
arch/arm/dts/imx6ul-isiot-emmc.dts | 42 +-
arch/arm/dts/imx6ul-isiot-nand.dts | 45 +-
arch/arm/dts/imx6ul-isiot.dtsi | 330 +++++--
arch/arm/dts/imx6ul-kontron-n6x1x-s.dtsi | 18 +-
.../dts/imx6ul-kontron-n6x1x-som-common.dtsi | 30 +-
arch/arm/dts/imx6ul-litesom.dtsi | 1 +
arch/arm/dts/imx6ul-opos6ul.dtsi | 194 +---
arch/arm/dts/imx6ul-opos6uldev.dts | 387 +-------
arch/arm/dts/imx6ul-phytec-phycore-som.dtsi | 21 +-
.../dts/imx6ul-phytec-segin-ff-rdk-nand.dts | 2 +
arch/arm/dts/imx6ul-phytec-segin.dtsi | 46 +-
arch/arm/dts/imx6ul-pico-hobbit.dts | 2 +-
arch/arm/dts/imx6ul-pico-pi.dts | 4 +-
arch/arm/dts/imx6ul-pico.dtsi | 40 +-
arch/arm/dts/imx6ul.dtsi | 186 ++--
arch/arm/dts/imx6ull-colibri.dtsi | 427 +++++----
arch/arm/dts/imx6ull-myir-mys-6ulx-eval.dts | 2 +-
.../dts/imx6ull-phytec-segin-ff-rdk-emmc.dts | 1 +
arch/arm/dts/imx6ull-phytec-segin.dtsi | 7 -
arch/arm/dts/imx6ull.dtsi | 14 +
arch/arm/dts/imx6ulz.dtsi | 1 -
include/dt-bindings/clock/imx6qdl-clock.h | 14 +-
111 files changed, 6508 insertions(+), 3653 deletions(-)
diff --git a/arch/arm/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/dts/imx6-logicpd-baseboard.dtsi
index c40a7af6ebee..d9de9b4f0c52 100644
--- a/arch/arm/dts/imx6-logicpd-baseboard.dtsi
+++ b/arch/arm/dts/imx6-logicpd-baseboard.dtsi
@@ -212,6 +212,7 @@
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
status = "disabled";
};
@@ -237,7 +238,6 @@
compatible = "wlf,wm8962";
reg = <0x1a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
- clock-names = "xclk";
DCVDD-supply = <®_audio>;
DBVDD-supply = <®_audio>;
AVDD-supply = <®_audio>;
@@ -249,9 +249,9 @@
gpio-cfg = <
0x0000 /* 0:Default */
0x0000 /* 1:Default */
- 0x0013 /* 2:FN_DMICCLK */
+ 0x0000 /* 2:FN_DMICCLK */
0x0000 /* 3:Default */
- 0x8014 /* 4:FN_DMICCDAT */
+ 0x0000 /* 4:FN_DMICCDAT */
0x0000 /* 5:Default */
>;
};
@@ -328,6 +328,10 @@
pinctrl-0 = <&pinctrl_pwm3>;
};
+&snvs_pwrkey {
+ status = "okay";
+};
+
&ssi2 {
status = "okay";
};
@@ -379,7 +383,7 @@
MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
- MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0 0x100b1
+ MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0
>;
};
diff --git a/arch/arm/dts/imx6-logicpd-som.dtsi b/arch/arm/dts/imx6-logicpd-som.dtsi
index 7ceae3573248..547fb141ec0c 100644
--- a/arch/arm/dts/imx6-logicpd-som.dtsi
+++ b/arch/arm/dts/imx6-logicpd-som.dtsi
@@ -207,6 +207,10 @@
vin-supply = <&sw1c_reg>;
};
+&snvs_poweroff {
+ status = "okay";
+};
+
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
diff --git a/arch/arm/dts/imx6dl-brppt2.dts b/arch/arm/dts/imx6dl-brppt2.dts
index 4f1c52bff834..5716e48a907e 100644
--- a/arch/arm/dts/imx6dl-brppt2.dts
+++ b/arch/arm/dts/imx6dl-brppt2.dts
@@ -161,10 +161,12 @@
};
&pwm3 {
+ #pwm-cells = <2>;
status = "okay";
};
&pwm4 {
+ #pwm-cells = <2>;
status = "okay";
};
diff --git a/arch/arm/dts/imx6dl-mamoj.dts b/arch/arm/dts/imx6dl-mamoj.dts
index 3f6d8aa4a25f..028951955bde 100644
--- a/arch/arm/dts/imx6dl-mamoj.dts
+++ b/arch/arm/dts/imx6dl-mamoj.dts
@@ -12,6 +12,156 @@
/ {
model = "BTicino i.MX6DL Mamoj board";
compatible = "bticino,imx6dl-mamoj", "fsl,imx6dl";
+
+ /* Will be filled by the bootloader */
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0>;
+ };
+
+ backlight_lcd: backlight-lcd {
+ compatible = "pwm-backlight";
+ pwms = <&pwm3 0 25000>; /* 25000ns -> 40kHz */
+ brightness-levels = <0 4 8 16 32 64 128 160 192 224 255>;
+ default-brightness-level = <7>;
+ };
+
+ display: disp0 {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interface-pix-fmt = "rgb24";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ lcd_display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lcd_display_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+ };
+
+ panel-lcd {
+ compatible = "rocktech,rk070er9427";
+ backlight = <&backlight_lcd>;
+ power-supply = <®_lcd_lr>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1_lcdif_pwr>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
+
+ reg_lcd_3v3: regulator-lcd-dvdd {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-dvdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 1 0>;
+ enable-active-high;
+ startup-delay-us = <21000>;
+ };
+
+ reg_lcd_power: regulator-lcd-power {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-enable";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 6 0>;
+ enable-active-high;
+ vin-supply = <®_lcd_3v3>;
+ };
+
+ reg_lcd_vgl: regulator-lcd-vgl {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-vgl";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <6000>;
+ enable-active-high;
+ vin-supply = <®_lcd_power>;
+ };
+
+ reg_lcd_vgh: regulator-lcd-vgh {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-vgh";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <6000>;
+ enable-active-high;
+ vin-supply = <®_lcd_avdd>;
+ };
+
+ reg_lcd_vcom: regulator-lcd-vcom {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-vcom";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 14 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <11000>;
+ enable-active-high;
+ vin-supply = <®_lcd_vgh>;
+ };
+
+ reg_lcd_lr: regulator-lcd-lr {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-lr";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_lcd_vcom>;
+ };
+
+ reg_lcd_avdd: regulator-lcd-avdd {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-avdd";
+ regulator-min-microvolt = <10280000>;
+ regulator-max-microvolt = <10280000>;
+ gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <6000>;
+ enable-active-high;
+ vin-supply = <®_lcd_vgl>;
+ };
+
+ reg_usb_host: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usbhost-vbus";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbhost>;
+ regulator-min-microvolt = <50000000>;
+ regulator-max-microvolt = <50000000>;
+ gpio = <&gpio6 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_wl18xx_vmmc: regulator-wl18xx-vmcc {
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1807";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wlan>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
};
&fec {
@@ -34,7 +184,7 @@
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
- pmic: pfuze100@08 {
+ pfuze100: pmic@8 {
compatible = "fsl,pfuze100";
reg = <0x08>;
@@ -148,12 +298,57 @@
};
};
+&ipu1_di0_disp0 {
+ remote-endpoint = <&lcd_display_in>;
+};
+
+&pwm3 {
+ #pwm-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
+&usbh1 {
+ vbus-supply = <®_usb_host>;
+ status = "okay";
+};
+
+&usbotg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ bus-width = <4>;
+ vmmc-supply = <®_wl18xx_vmmc>;
+ no-1-8-v;
+ non-removable;
+ wakeup-source;
+ keep-power-in-suspend;
+ cap-power-off-card;
+ max-frequency = <25000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1837";
+ reg = <2>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+ tcxo-clock-frequency = <26000000>;
+ };
+};
+
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
@@ -201,6 +396,59 @@
>;
};
+ pinctrl_ipu1_lcdif: pinctrlipu1lcdif { /* parallel port 24-bit */
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 /* VDOUT_PCLK */
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 /* VDOUT_HSYNC */
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 /* VDOUT_VSYNC */
+ MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x10 /* VDOUT_RESET */
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
+ >;
+ };
+
+ pinctrl_ipu1_lcdif_pwr: ipu1lcdifpwrgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x40013058 /* EN_LCD33V */
+ MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x4001b0b0 /* EN_AVDD */
+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x40013058 /* ENVGH */
+ MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x40013058 /* ENVGL */
+ MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x40013058 /* LCD_POWER */
+ MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x40013058 /* EN_VCOM_LCD */
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x40013058 /* LCD_L_R */
+ MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x40013058 /* LCD_U_D */
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
pinctrl_uart3: uart3grp {
fsl,pins = <
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
@@ -208,6 +456,23 @@
>;
};
+ pinctrl_usbhost: usbhostgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x4001b0b0
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17069
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10079
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17069
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17069
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17069
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17069
+ >;
+ };
+
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
@@ -222,4 +487,10 @@
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
>;
};
+
+ pinctrl_wlan: wlangrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x4001b0b0
+ >;
+ };
};
diff --git a/arch/arm/dts/imx6dl-mba6.dtsi b/arch/arm/dts/imx6dl-mba6.dtsi
index d74adf2b2885..b749b424bbd6 100644
--- a/arch/arm/dts/imx6dl-mba6.dtsi
+++ b/arch/arm/dts/imx6dl-mba6.dtsi
@@ -1,6 +1,10 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (C) 2020 TQ-Systems GmbH
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
ðphy {
rxdv-skew-ps = <180>;
diff --git a/arch/arm/dts/imx6dl-mba6a.dts b/arch/arm/dts/imx6dl-mba6a.dts
index fc9cc2c056f6..df0a96b28af0 100644
--- a/arch/arm/dts/imx6dl-mba6a.dts
+++ b/arch/arm/dts/imx6dl-mba6a.dts
@@ -1,6 +1,10 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (C) 2020 TQ-Systems GmbH
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
/dts-v1/;
@@ -11,6 +15,7 @@
#include "imx6dl-mba6.dtsi"
/ {
- model = "TQ TQMa6S on MBa6x";
- compatible = "tq,mba6a", "tq,tqma6dl", "fsl,imx6dl";
+ model = "TQ TQMa6S/DL on MBa6x";
+ compatible = "tq,imx6dl-mba6x-a", "tq,mba6a",
+ "tq,imx6dl-tqma6dl-a", "fsl,imx6dl";
};
diff --git a/arch/arm/dts/imx6dl-mba6b.dts b/arch/arm/dts/imx6dl-mba6b.dts
index a3c8d9d4c6bd..610b19d2db0f 100644
--- a/arch/arm/dts/imx6dl-mba6b.dts
+++ b/arch/arm/dts/imx6dl-mba6b.dts
@@ -1,6 +1,10 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (C) 2020 TQ-Systems GmbH
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
/dts-v1/;
@@ -11,6 +15,7 @@
#include "imx6dl-mba6.dtsi"
/ {
- model = "TQ TQMa6S on MBa6x";
- compatible = "tq,mba6b", "tq,tqma6dl", "fsl,imx6dl";
+ model = "TQ TQMa6S/DL on MBa6x";
+ compatible = "tq,imx6dl-mba6x-b", "tq,mba6b",
+ "tq,imx6dl-tqma6dl-b", "fsl,imx6dl";
};
diff --git a/arch/arm/dts/imx6dl-nitrogen6x.dts b/arch/arm/dts/imx6dl-nitrogen6x.dts
index 9427ab6399bf..ef58d3b0ea0d 100644
--- a/arch/arm/dts/imx6dl-nitrogen6x.dts
+++ b/arch/arm/dts/imx6dl-nitrogen6x.dts
@@ -1,11 +1,11 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2013-2019 Boundary Devices, Inc.
-// Copyright 2012 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2013 Boundary Devices, Inc.
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
/dts-v1/;
-
#include "imx6dl.dtsi"
#include "imx6qdl-nitrogen6x.dtsi"
diff --git a/arch/arm/dts/imx6dl-riotboard.dts b/arch/arm/dts/imx6dl-riotboard.dts
index 065d3ab0f50a..e7d9bfbfd0e4 100644
--- a/arch/arm/dts/imx6dl-riotboard.dts
+++ b/arch/arm/dts/imx6dl-riotboard.dts
@@ -106,6 +106,8 @@
reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <1000>;
+ qca,smarteee-tw-us-1g = <24>;
+ qca,clk-out-frequency = <125000000>;
};
};
};
diff --git a/arch/arm/dts/imx6dl-sabreauto.dts b/arch/arm/dts/imx6dl-sabreauto.dts
index 660d52a245ba..ff3283c83a39 100644
--- a/arch/arm/dts/imx6dl-sabreauto.dts
+++ b/arch/arm/dts/imx6dl-sabreauto.dts
@@ -11,3 +11,18 @@
model = "Freescale i.MX6 DualLite/Solo SABRE Automotive Board";
compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl";
};
+
+&cpu0 {
+ operating-points = <
+ /* kHz uV */
+ 996000 1275000
+ 792000 1175000
+ 396000 1150000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 996000 1200000
+ 792000 1175000
+ 396000 1175000
+ >;
+};
diff --git a/arch/arm/dts/imx6dl-tqma6a.dtsi b/arch/arm/dts/imx6dl-tqma6a.dtsi
index df87b381cae2..e891ef9b0091 100644
--- a/arch/arm/dts/imx6dl-tqma6a.dtsi
+++ b/arch/arm/dts/imx6dl-tqma6a.dtsi
@@ -1,14 +1,16 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (C) 2020 TQ-Systems GmbH
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
#include "imx6dl.dtsi"
#include "imx6qdl-tqma6a.dtsi"
#include "imx6qdl-tqma6.dtsi"
/ {
- memory {
+ memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x20000000>;
};
};
-
diff --git a/arch/arm/dts/imx6dl-tqma6b.dtsi b/arch/arm/dts/imx6dl-tqma6b.dtsi
index 47ffbc4d9529..38cd8501a886 100644
--- a/arch/arm/dts/imx6dl-tqma6b.dtsi
+++ b/arch/arm/dts/imx6dl-tqma6b.dtsi
@@ -1,14 +1,16 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (C) 2020 TQ-Systems GmbH
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
#include "imx6dl.dtsi"
#include "imx6qdl-tqma6b.dtsi"
#include "imx6qdl-tqma6.dtsi"
/ {
- memory {
+ memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x20000000>;
};
};
-
diff --git a/arch/arm/dts/imx6dl.dtsi b/arch/arm/dts/imx6dl.dtsi
index ae5aad6b9efc..fdd81fdc3f35 100644
--- a/arch/arm/dts/imx6dl.dtsi
+++ b/arch/arm/dts/imx6dl.dtsi
@@ -15,7 +15,7 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <0>;
@@ -44,6 +44,8 @@
arm-supply = <®_arm>;
pu-supply = <®_pu>;
soc-supply = <®_soc>;
+ nvmem-cells = <&cpu_speed_grade>;
+ nvmem-cell-names = "speed_grade";
};
cpu@1 {
@@ -64,6 +66,7 @@
396000 1175000
>;
clock-latency = <61036>; /* two CLK32 periods */
+ #cooling-cells = <2>;
clocks = <&clks IMX6QDL_CLK_ARM>,
<&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
<&clks IMX6QDL_CLK_STEP>,
@@ -85,10 +88,6 @@
};
aips1: bus@2000000 {
- iomuxc: iomuxc@20e0000 {
- compatible = "fsl,imx6dl-iomuxc";
- };
-
pxp: pxp@20f0000 {
reg = <0x020f0000 0x4000>;
interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -295,6 +294,10 @@
compatible = "fsl,imx6dl-hdmi";
};
+&iomuxc {
+ compatible = "fsl,imx6dl-iomuxc";
+};
+
&ipu1_csi1 {
ipu1_csi1_from_ipu1_csi1_mux: endpoint {
remote-endpoint = <&ipu1_csi1_mux_to_ipu1_csi1>;
diff --git a/arch/arm/dts/imx6q-b450v3.dts b/arch/arm/dts/imx6q-b450v3.dts
index 995caa8a3314..d994b32ad825 100644
--- a/arch/arm/dts/imx6q-b450v3.dts
+++ b/arch/arm/dts/imx6q-b450v3.dts
@@ -1,4 +1,3 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
* Copyright 2015 Timesys Corporation.
* Copyright 2015 General Electric Company
@@ -66,13 +65,6 @@
};
};
-&clks {
- assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
- <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
- assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
- <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
&ldb {
status = "okay";
@@ -92,14 +84,19 @@
};
&pca9539 {
- P04 {
+ gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN",
+ "", "SM_D_ACT", "DP1_RST#", "",
+ "WD15S_EN", "WD15S_DIS#", "", "",
+ "", "", "", "";
+
+ P04-hog {
gpio-hog;
gpios = <4 0>;
output-low;
line-name = "PCA9539-P04";
};
- P07 {
+ P07-hog {
gpio-hog;
gpios = <7 0>;
output-low;
@@ -158,5 +155,3 @@
};
};
};
-
-#include "imx6q-bx50v3-uboot.dtsi"
diff --git a/arch/arm/dts/imx6q-b650v3.dts b/arch/arm/dts/imx6q-b650v3.dts
index 95a61347da59..fa1a1df37cde 100644
--- a/arch/arm/dts/imx6q-b650v3.dts
+++ b/arch/arm/dts/imx6q-b650v3.dts
@@ -1,4 +1,3 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
* Copyright 2015 Timesys Corporation.
* Copyright 2015 General Electric Company
@@ -66,13 +65,6 @@
};
};
-&clks {
- assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
- <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
- assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
- <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
&ldb {
status = "okay";
@@ -92,7 +84,12 @@
};
&pca9539 {
- P07 {
+ gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN",
+ "", "SM_D_ACT", "DP1_RST#", "",
+ "WD15S_EN", "WD15S_DIS#", "", "",
+ "", "", "", "";
+
+ P07-hog {
gpio-hog;
gpios = <7 0>;
output-low;
@@ -157,5 +154,3 @@
};
};
};
-
-#include "imx6q-bx50v3-uboot.dtsi"
diff --git a/arch/arm/dts/imx6q-b850v3.dts b/arch/arm/dts/imx6q-b850v3.dts
index 6416825234b0..db8c332df6a1 100644
--- a/arch/arm/dts/imx6q-b850v3.dts
+++ b/arch/arm/dts/imx6q-b850v3.dts
@@ -1,4 +1,3 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
* Copyright 2015 Timesys Corporation.
* Copyright 2015 General Electric Company
@@ -54,17 +53,6 @@
};
};
-&clks {
- assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
- <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
- <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
- <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>;
- assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
- <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
- <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
- <&clks IMX6QDL_CLK_PLL2_PFD2_396M>;
-};
-
&ldb {
fsl,dual-channel;
status = "okay";
@@ -211,14 +199,19 @@
};
&pca9539 {
- P10 {
+ gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN",
+ "REMOTE_ON_PML#", "SM_D_ACT", "DP1_RST#", "DP2_RST#",
+ "", "", "", "",
+ "", "", "", "";
+
+ P10-hog {
gpio-hog;
gpios = <8 0>;
output-low;
line-name = "PCA9539-P10";
};
- P11 {
+ P11-hog {
gpio-hog;
gpios = <9 0>;
output-low;
@@ -300,5 +293,3 @@
phy-handle = <&switchphy4>;
};
};
-
-#include "imx6q-bx50v3-uboot.dtsi"
diff --git a/arch/arm/dts/imx6q-ba16.dtsi b/arch/arm/dts/imx6q-ba16.dtsi
index 9da2bb6e869e..f266f1b7e0cf 100644
--- a/arch/arm/dts/imx6q-ba16.dtsi
+++ b/arch/arm/dts/imx6q-ba16.dtsi
@@ -1,4 +1,3 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
* Support for imx6 based Advantech DMS-BA16 Qseven module
*
@@ -125,6 +124,9 @@
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
+ pinctrl-0 = <&pinctrl_usbotg_vbus>;
+ gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
};
@@ -135,12 +137,12 @@
};
&ecspi1 {
- cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
- flash: n25q032@0 {
+ flash: flash@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
@@ -173,8 +175,9 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id";
- status = "okay";
+ phy-supply = <®_3p3v>;
phy-handle = <&phy0>;
+ status = "okay";
mdio {
#address-cells = <1>;
@@ -346,6 +349,7 @@
};
&pwm1 {
+ #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
@@ -586,6 +590,12 @@
>;
};
+ pinctrl_usbotg_vbus: usbotgvbusgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
+ >;
+ };
+
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
diff --git a/arch/arm/dts/imx6q-bx50v3.dtsi b/arch/arm/dts/imx6q-bx50v3.dtsi
index 19829613c04a..ead83091e193 100644
--- a/arch/arm/dts/imx6q-bx50v3.dtsi
+++ b/arch/arm/dts/imx6q-bx50v3.dtsi
@@ -1,4 +1,3 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
* Copyright 2015 Timesys Corporation.
* Copyright 2015 General Electric Company
@@ -103,10 +102,15 @@
#address-cells = <1>;
#size-cells = <0>;
- switch@0 {
+ switch: switch@0 {
compatible = "marvell,mv88e6085"; /* 88e6240*/
reg = <0>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
switch_ports: ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -118,22 +122,32 @@
switchphy0: switchphy@0 {
reg = <0>;
+ interrupt-parent = <&switch>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
};
switchphy1: switchphy@1 {
reg = <1>;
+ interrupt-parent = <&switch>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
};
switchphy2: switchphy@2 {
reg = <2>;
+ interrupt-parent = <&switch>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
};
switchphy3: switchphy@3 {
reg = <3>;
+ interrupt-parent = <&switch>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
};
switchphy4: switchphy@4 {
reg = <4>;
+ interrupt-parent = <&switch>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
@@ -141,12 +155,12 @@
};
&ecspi5 {
- cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi5>;
status = "okay";
- m25_eeprom: m25p80@0 {
+ m25_eeprom: flash@0 {
compatible = "atmel,at25";
spi-max-frequency = <10000000>;
size = <0x8000>;
@@ -159,8 +173,8 @@
&i2c1 {
pinctrl-names = "default", "gpio";
pinctrl-1 = <&pinctrl_i2c1_gpio>;
- sda-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>;
- scl-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
pca9547: mux@70 {
compatible = "nxp,pca9547";
@@ -234,42 +248,42 @@
interrupt-parent = <&gpio2>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
- P12 {
+ P12-hog {
gpio-hog;
gpios = <10 0>;
output-low;
line-name = "PCA9539-P12";
};
- P13 {
+ P13-hog {
gpio-hog;
gpios = <11 0>;
output-low;
line-name = "PCA9539-P13";
};
- P14 {
+ P14-hog {
gpio-hog;
gpios = <12 0>;
output-low;
line-name = "PCA9539-P14";
};
- P15 {
+ P15-hog {
gpio-hog;
gpios = <13 0>;
output-low;
line-name = "PCA9539-P15";
};
- P16 {
+ P16-hog {
gpio-hog;
gpios = <14 0>;
output-low;
line-name = "PCA9539-P16";
};
- P17 {
+ P17-hog {
gpio-hog;
gpios = <15 0>;
output-low;
@@ -301,15 +315,15 @@
&i2c2 {
pinctrl-names = "default", "gpio";
pinctrl-1 = <&pinctrl_i2c2_gpio>;
- sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
- scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
&i2c3 {
pinctrl-names = "default", "gpio";
pinctrl-1 = <&pinctrl_i2c3_gpio>;
- sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
- scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
&iomuxc {
@@ -379,4 +393,17 @@
};
};
-#include "imx6q-bx50v3-uboot.dtsi"
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+ <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
+ <&clks IMX6QDL_CLK_IPU1_DI1_PRE_SEL>,
+ <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>,
+ <&clks IMX6QDL_CLK_IPU2_DI1_PRE_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+ <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+ <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+ <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+ <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+ <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
+};
diff --git a/arch/arm/dts/imx6q-cm-fx6.dts b/arch/arm/dts/imx6q-cm-fx6.dts
index 1f574c5eb573..1ad41c944b4b 100644
--- a/arch/arm/dts/imx6q-cm-fx6.dts
+++ b/arch/arm/dts/imx6q-cm-fx6.dts
@@ -43,13 +43,15 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
#include "imx6q.dtsi"
/ {
model = "CompuLab CM-FX6";
compatible = "compulab,cm-fx6", "fsl,imx6q";
- memory {
+ memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x80000000>;
};
@@ -134,10 +136,35 @@
};
};
-/*
- * The U-Boot: audio mux node has been removed because the required dt-bindings
- * header file is not present in the U-Boot.
- */
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+
+ ssi2 {
+ fsl,audmux-port = <1>;
+ fsl,port-config = <
+ (IMX_AUDMUX_V2_PTCR_RCLKDIR |
+ IMX_AUDMUX_V2_PTCR_RCSEL(3 | 0x8) |
+ IMX_AUDMUX_V2_PTCR_TCLKDIR |
+ IMX_AUDMUX_V2_PTCR_TCSEL(3))
+ IMX_AUDMUX_V2_PDCR_RXDSEL(3)
+ >;
+ };
+
+ audmux4 {
+ fsl,audmux-port = <3>;
+ fsl,port-config = <
+ (IMX_AUDMUX_V2_PTCR_TFSDIR |
+ IMX_AUDMUX_V2_PTCR_TFSEL(1) |
+ IMX_AUDMUX_V2_PTCR_RCLKDIR |
+ IMX_AUDMUX_V2_PTCR_RCSEL(1 | 0x8) |
+ IMX_AUDMUX_V2_PTCR_TCLKDIR |
+ IMX_AUDMUX_V2_PTCR_TCSEL(1))
+ IMX_AUDMUX_V2_PDCR_RXDSEL(1)
+ >;
+ };
+};
&cpu0 {
/*
@@ -161,13 +188,79 @@
>;
};
+&cpu1 {
+ /*
+ * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+ * the module behaves unstable at this frequency. Hence, remove the
+ * 1.2GHz operation point here.
+ */
+ operating-points = <
+ /* kHz uV */
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 975000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 1175000
+ >;
+};
+
+&cpu2 {
+ /*
+ * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+ * the module behaves unstable at this frequency. Hence, remove the
+ * 1.2GHz operation point here.
+ */
+ operating-points = <
+ /* kHz uV */
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 975000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 1175000
+ >;
+};
+
+&cpu3 {
+ /*
+ * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+ * the module behaves unstable at this frequency. Hence, remove the
+ * 1.2GHz operation point here.
+ */
+ operating-points = <
+ /* kHz uV */
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 975000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 1175000
+ >;
+};
+
&ecspi1 {
- cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
- m25p80@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p", "jedec,spi-nor";
@@ -396,8 +489,3 @@
*/
status = "disabled";
};
-
-/* The U-Boot: enable usdhc3 for mmc boot */
-&usdhc3 {
- status = "okay";
-};
diff --git a/arch/arm/dts/imx6q-icore-ofcap10.dts b/arch/arm/dts/imx6q-icore-ofcap10.dts
index 81cc346dd149..02aca1e28ce3 100644
--- a/arch/arm/dts/imx6q-icore-ofcap10.dts
+++ b/arch/arm/dts/imx6q-icore-ofcap10.dts
@@ -12,6 +12,17 @@
/ {
model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 10.1 Kit";
compatible = "engicam,imx6-icore", "fsl,imx6q";
+
+ panel {
+ compatible = "ampire,am-1280800n3tzqw-t00h";
+ backlight = <&backlight_lvds>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
};
&ldb {
@@ -22,18 +33,11 @@
fsl,data-width = <24>;
status = "okay";
- display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
- clock-frequency = <60000000>;
- hactive = <1280>;
- vactive = <800>;
- hback-porch = <40>;
- hfront-porch = <40>;
- vback-porch = <10>;
- vfront-porch = <3>;
- hsync-len = <80>;
- vsync-len = <10>;
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
};
};
};
diff --git a/arch/arm/dts/imx6q-logicpd.dts b/arch/arm/dts/imx6q-logicpd.dts
index 45eb0b7f75f8..46a4ddedb423 100644
--- a/arch/arm/dts/imx6q-logicpd.dts
+++ b/arch/arm/dts/imx6q-logicpd.dts
@@ -9,11 +9,11 @@
/ {
model = "Logic PD i.MX6QD SOM-M3";
- compatible = "fsl,imx6q";
+ compatible = "logicpd,imx6q-logicpd", "fsl,imx6q";
backlight: backlight-lvds {
compatible = "pwm-backlight";
- pwms = <&pwm3 0 20000>;
+ pwms = <&pwm3 0 20000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
power-supply = <®_lcd>;
@@ -21,6 +21,8 @@
panel-lvds0 {
compatible = "okaya,rs800480t-7x0gp";
+ power-supply = <®_lcd_reset>;
+ backlight = <&backlight>;
port {
panel_in_lvds0: endpoint {
@@ -38,7 +40,6 @@
regulator-max-microvolt = <3300000>;
gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>;
enable-active-high;
- regulator-always-on;
vin-supply = <®_3v3>;
startup-delay-us = <500000>;
};
@@ -52,7 +53,6 @@
regulator-max-microvolt = <3300000>;
gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
- regulator-always-on;
vin-supply = <®_lcd>;
};
};
@@ -73,6 +73,16 @@
status = "okay";
};
+&i2c1 {
+ touchscreen@26 {
+ compatible = "ilitek,ili2117";
+ reg = <0x26>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touchscreen>;
+ interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_RISING>;
+ };
+};
+
&ldb {
status = "okay";
diff --git a/arch/arm/dts/imx6q-marsboard.dts b/arch/arm/dts/imx6q-marsboard.dts
index 05ee28388229..cc1801002394 100644
--- a/arch/arm/dts/imx6q-marsboard.dts
+++ b/arch/arm/dts/imx6q-marsboard.dts
@@ -100,7 +100,7 @@
cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
status = "okay";
- m25p80@0 {
+ flash@0 {
compatible = "microchip,sst25vf016b";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/dts/imx6q-mba6.dtsi b/arch/arm/dts/imx6q-mba6.dtsi
index 76e8410f8ed9..0d7be4567291 100644
--- a/arch/arm/dts/imx6q-mba6.dtsi
+++ b/arch/arm/dts/imx6q-mba6.dtsi
@@ -1,6 +1,16 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (C) 2020 TQ-Systems GmbH
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+&ecspi5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi5_mba6x>;
+ cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+};
ðphy {
rxdv-skew-ps = <180>;
@@ -16,3 +26,19 @@
txc-skew-ps = <1860>;
rxc-skew-ps = <1860>;
};
+
+&sata {
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_ecspi5_mba6x: ecspi5grp-mba6x {
+ fsl,pins = <
+ /* HYS, SPEED = MED, 100k up, DSE = 011, SRE_FAST */
+ MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x1b099
+ MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0xb099
+ MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0xb099
+ MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0xb099 /* eCSPI5 SS0 */
+ >;
+ };
+};
diff --git a/arch/arm/dts/imx6q-mba6a.dts b/arch/arm/dts/imx6q-mba6a.dts
index 7983ad94f82a..349a08605a5e 100644
--- a/arch/arm/dts/imx6q-mba6a.dts
+++ b/arch/arm/dts/imx6q-mba6a.dts
@@ -1,10 +1,13 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (C) 2020 TQ-Systems GmbH
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
#include "imx6q-tqma6a.dtsi"
#include "imx6qdl-mba6.dtsi"
#include "imx6qdl-mba6a.dtsi"
@@ -12,5 +15,6 @@
/ {
model = "TQ TQMa6Q on MBa6x";
- compatible = "tq,mba6a", "fsl,imx6q";
+ compatible = "tq,imx6q-mba6x-a", "tq,mba6a",
+ "tq,imx6q-tqma6q-a", "fsl,imx6q";
};
diff --git a/arch/arm/dts/imx6q-mba6b.dts b/arch/arm/dts/imx6q-mba6b.dts
index 9d117dd190fa..02c9f3e91b8f 100644
--- a/arch/arm/dts/imx6q-mba6b.dts
+++ b/arch/arm/dts/imx6q-mba6b.dts
@@ -1,10 +1,13 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (C) 2020 TQ-Systems GmbH
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
#include "imx6q-tqma6b.dtsi"
#include "imx6qdl-mba6.dtsi"
#include "imx6qdl-mba6b.dtsi"
@@ -12,5 +15,6 @@
/ {
model = "TQ TQMa6Q on MBa6x";
- compatible = "tq,mba6b", "fsl,imx6q";
+ compatible = "tq,imx6q-mba6x-b", "tq,mba6b",
+ "tq,imx6q-tqma6q-b", "fsl,imx6q";
};
diff --git a/arch/arm/dts/imx6q-mccmon6.dts b/arch/arm/dts/imx6q-mccmon6.dts
index 27cde56115fd..55692c73943d 100644
--- a/arch/arm/dts/imx6q-mccmon6.dts
+++ b/arch/arm/dts/imx6q-mccmon6.dts
@@ -1,31 +1,82 @@
-// SPDX-License-Identifier: GPL-2.0+
+// SPDX-License-Identifier: GPL-2.0-only
/*
- * Copyright 2019
+ * Copyright 2016-2017
* Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- *
- * SPDX-License-Identifier: GPL-2.0+ or X11
*/
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
+
#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+
/ {
- model = "Liebherr Nenzig (LWN) iMX6Q";
- compatible = "lwn,imx6-mccmon6", "fsl,imx6";
+ model = "Liebherr (LWN) monitor6 i.MX6 Quad Board";
+ compatible = "lwn,mccmon6", "fsl,imx6q";
+
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x80000000>;
+ };
- aliases {
- mmc0 = &usdhc3;
- mmc1 = &usdhc2;
- spi0 = &ecspi3;
+ backlight_lvds: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight>;
+ pwms = <&pwm2 0 5000000 PWM_POLARITY_INVERTED>;
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100 101 102 103 104 105 106 107 108 109
+ 110 111 112 113 114 115 116 117 118 119
+ 120 121 122 123 124 125 126 127 128 129
+ 130 131 132 133 134 135 136 137 138 139
+ 140 141 142 143 144 145 146 147 148 149
+ 150 151 152 153 154 155 156 157 158 159
+ 160 161 162 163 164 165 166 167 168 169
+ 170 171 172 173 174 175 176 177 178 179
+ 180 181 182 183 184 185 186 187 188 189
+ 190 191 192 193 194 195 196 197 198 199
+ 200 201 202 203 204 205 206 207 208 209
+ 210 211 212 213 214 215 216 217 218 219
+ 220 221 222 223 224 225 226 227 228 229
+ 230 231 232 233 234 235 236 237 238 239
+ 240 241 242 243 244 245 246 247 248 249
+ 250 251 252 253 254 255>;
+ default-brightness-level = <50>;
+ enable-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
};
- chosen {
- stdout-path = &uart1;
+ reg_lvds: regulator-lvds {
+ compatible = "regulator-fixed";
+ regulator-name = "lvds_ppen";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_lvds>;
+ gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
- memory@10000000 {
- reg = <0x10000000 0x80000000>;
+ panel-lvds0 {
+ compatible = "innolux,g121x1-l03";
+ backlight = <&backlight_lvds>;
+ power-supply = <®_lvds>;
+
+ port {
+ panel_in_lvds0: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
};
};
@@ -33,7 +84,6 @@
cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs &pinctrl_ecspi3_flwp>;
- spi-max-frequency = <25000000>;
status = "okay";
s25sl032p: flash@0 {
@@ -50,21 +100,8 @@
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
- phy-reset-duration = <10>;
- phy-reset-post-delay = <1>;
- /* KSZ9031 PHY SKEW setup - old values * 60 ps */
- rxc-skew-ps = <1860>;
- txc-skew-ps = <1860>;
- txen-skew-ps = <900>;
- rxdv-skew-ps = <900>;
- rxd0-skew-ps = <180>;
- rxd1-skew-ps = <180>;
- rxd2-skew-ps = <180>;
- rxd3-skew-ps = <180>;
- txd0-skew-ps = <120>;
- txd1-skew-ps = <300>;
- txd2-skew-ps = <0>;
- txd3-skew-ps = <120>;
+ interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
status = "okay";
};
@@ -181,6 +218,59 @@
};
};
+&ldb {
+ status = "okay";
+
+ lvds0: lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <24>;
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in_lvds0>;
+ };
+ };
+ };
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
&weim {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
@@ -201,7 +291,13 @@
&iomuxc {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_backlight: dispgrp {
+ fsl,pins = <
+ /* BLEN_OUT */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+ >;
+ };
pinctrl_ecspi3: ecspi3grp {
fsl,pins = <
@@ -246,13 +342,6 @@
>;
};
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
- MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0
- >;
- };
-
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
@@ -267,6 +356,19 @@
>;
};
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_reg_lvds: reqlvdsgrp {
+ fsl,pins = <
+ /* LVDS_PPEN_OUT */
+ MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
@@ -274,6 +376,15 @@
>;
};
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+ >;
+ };
+
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
@@ -356,27 +467,3 @@
>;
};
};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- status = "okay";
-};
-
-&usdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- bus-width = <4>;
- cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
- status = "okay";
-};
-
-&usdhc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3>;
- bus-width = <8>;
- non-removable;
- no-1-8-v;
- keep-power-in-suspend;
- status = "okay";
-};
diff --git a/arch/arm/dts/imx6q-nitrogen6x.dts b/arch/arm/dts/imx6q-nitrogen6x.dts
index ebb22a404eff..435445a34ad0 100644
--- a/arch/arm/dts/imx6q-nitrogen6x.dts
+++ b/arch/arm/dts/imx6q-nitrogen6x.dts
@@ -1,11 +1,11 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2013-2019 Boundary Devices, Inc.
-// Copyright 2012 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2013 Boundary Devices, Inc.
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
/dts-v1/;
-
#include "imx6q.dtsi"
#include "imx6qdl-nitrogen6x.dtsi"
diff --git a/arch/arm/dts/imx6q-novena.dts b/arch/arm/dts/imx6q-novena.dts
index 35383c9a2b1f..225cf6b7a7a4 100644
--- a/arch/arm/dts/imx6q-novena.dts
+++ b/arch/arm/dts/imx6q-novena.dts
@@ -61,11 +61,6 @@
reg = <0x10000000 0>;
};
- aliases {
- mmc0 = &usdhc3;
- mmc1 = &usdhc2;
- };
-
chosen {
stdout-path = &uart2;
};
@@ -112,7 +107,7 @@
};
panel: panel {
- compatible = "innolux,n133hse-ea1", "simple-panel";
+ compatible = "innolux,n133hse-ea1";
backlight = <&backlight>;
};
@@ -227,20 +222,30 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet_novena>;
phy-mode = "rgmii";
+ phy-handle = <ðphy>;
phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
- rxc-skew-ps = <3000>;
- rxdv-skew-ps = <0>;
- txc-skew-ps = <3000>;
- txen-skew-ps = <0>;
- rxd0-skew-ps = <0>;
- rxd1-skew-ps = <0>;
- rxd2-skew-ps = <0>;
- rxd3-skew-ps = <0>;
- txd0-skew-ps = <3000>;
- txd1-skew-ps = <3000>;
- txd2-skew-ps = <3000>;
- txd3-skew-ps = <3000>;
status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy: ethernet-phy {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ rxc-skew-ps = <3000>;
+ rxdv-skew-ps = <0>;
+ txc-skew-ps = <3000>;
+ txen-skew-ps = <0>;
+ rxd0-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd3-skew-ps = <0>;
+ txd0-skew-ps = <3000>;
+ txd1-skew-ps = <3000>;
+ txd2-skew-ps = <3000>;
+ txd3-skew-ps = <3000>;
+ };
+ };
};
&hdmi {
@@ -460,6 +465,7 @@
};
&pwm1 {
+ #pwm-cells = <2>;
status = "okay";
};
diff --git a/arch/arm/dts/imx6q-phytec-mira-rdk-nand.dts b/arch/arm/dts/imx6q-phytec-mira-rdk-nand.dts
index 65d2e483c136..3f13726c8058 100644
--- a/arch/arm/dts/imx6q-phytec-mira-rdk-nand.dts
+++ b/arch/arm/dts/imx6q-phytec-mira-rdk-nand.dts
@@ -8,6 +8,9 @@
#include "imx6q.dtsi"
#include "imx6qdl-phytec-phycore-som.dtsi"
#include "imx6qdl-phytec-mira.dtsi"
+#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
+#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
+#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi"
/ {
model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with NAND";
diff --git a/arch/arm/dts/imx6q-sabrelite.dts b/arch/arm/dts/imx6q-sabrelite.dts
index 91e031c7ca8b..dc51262e7b2f 100644
--- a/arch/arm/dts/imx6q-sabrelite.dts
+++ b/arch/arm/dts/imx6q-sabrelite.dts
@@ -1,11 +1,46 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2013-2019 Boundary Devices, Inc.
-// Copyright 2012 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
/dts-v1/;
-
#include "imx6q.dtsi"
#include "imx6qdl-sabrelite.dtsi"
@@ -17,3 +52,8 @@
&sata {
status = "okay";
};
+
+&ipu1_csi1_from_mipi_vc1 {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+};
diff --git a/arch/arm/dts/imx6q-tbs2910.dts b/arch/arm/dts/imx6q-tbs2910.dts
index 7d0a0676ff7c..8daef65d5bb3 100644
--- a/arch/arm/dts/imx6q-tbs2910.dts
+++ b/arch/arm/dts/imx6q-tbs2910.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+ OR MIT
//
-// Copyright 2014-2019 Soeren Moch <smoch@web.de>
+// Copyright 2014 Soeren Moch <smoch@web.de>
/dts-v1/;
@@ -20,7 +20,7 @@
mmc0 = &usdhc2;
mmc1 = &usdhc3;
mmc2 = &usdhc4;
- usb0 = &usbotg;
+ /delete-property/ mmc3;
};
memory@10000000 {
@@ -106,7 +106,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id";
- phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
phy-handle = <&phy>;
status = "okay";
@@ -117,6 +116,8 @@
phy: ethernet-phy@4 {
reg = <4>;
qca,clk-out-frequency = <125000000>;
+ reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
};
};
};
@@ -158,7 +159,7 @@
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
- rtc: ds1307@68 {
+ rtc: rtc@68 {
compatible = "dallas,ds1307";
reg = <0x68>;
};
diff --git a/arch/arm/dts/imx6q-tqma6a.dtsi b/arch/arm/dts/imx6q-tqma6a.dtsi
index b252077f4994..ab4c07c13a13 100644
--- a/arch/arm/dts/imx6q-tqma6a.dtsi
+++ b/arch/arm/dts/imx6q-tqma6a.dtsi
@@ -1,14 +1,16 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (C) 2020 TQ-Systems GmbH
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
#include "imx6q.dtsi"
#include "imx6qdl-tqma6a.dtsi"
#include "imx6qdl-tqma6.dtsi"
/ {
- memory {
+ memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
};
-
diff --git a/arch/arm/dts/imx6q-tqma6b.dtsi b/arch/arm/dts/imx6q-tqma6b.dtsi
index 107a9eb037ea..7224c376c318 100644
--- a/arch/arm/dts/imx6q-tqma6b.dtsi
+++ b/arch/arm/dts/imx6q-tqma6b.dtsi
@@ -1,14 +1,15 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (C) 2020 TQ-Systems GmbH
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ */
#include "imx6q.dtsi"
#include "imx6qdl-tqma6b.dtsi"
#include "imx6qdl-tqma6.dtsi"
/ {
- memory {
+ memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
};
-
diff --git a/arch/arm/dts/imx6q.dtsi b/arch/arm/dts/imx6q.dtsi
index c37484dce35f..9caba4529c71 100644
--- a/arch/arm/dts/imx6q.dtsi
+++ b/arch/arm/dts/imx6q.dtsi
@@ -9,7 +9,6 @@
/ {
aliases {
ipu1 = &ipu2;
- video1 = &ipu2;
spi4 = &ecspi5;
};
@@ -50,6 +49,8 @@
arm-supply = <®_arm>;
pu-supply = <®_pu>;
soc-supply = <®_soc>;
+ nvmem-cells = <&cpu_speed_grade>;
+ nvmem-cell-names = "speed_grade";
};
cpu1: cpu@1 {
@@ -74,6 +75,7 @@
396000 1175000
>;
clock-latency = <61036>; /* two CLK32 periods */
+ #cooling-cells = <2>;
clocks = <&clks IMX6QDL_CLK_ARM>,
<&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
<&clks IMX6QDL_CLK_STEP>,
@@ -108,6 +110,7 @@
396000 1175000
>;
clock-latency = <61036>; /* two CLK32 periods */
+ #cooling-cells = <2>;
clocks = <&clks IMX6QDL_CLK_ARM>,
<&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
<&clks IMX6QDL_CLK_STEP>,
@@ -142,6 +145,7 @@
396000 1175000
>;
clock-latency = <61036>; /* two CLK32 periods */
+ #cooling-cells = <2>;
clocks = <&clks IMX6QDL_CLK_ARM>,
<&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
<&clks IMX6QDL_CLK_STEP>,
@@ -173,15 +177,11 @@
clocks = <&clks IMX6Q_CLK_ECSPI5>,
<&clks IMX6Q_CLK_ECSPI5>;
clock-names = "ipg", "per";
- dmas = <&sdma 11 8 1>, <&sdma 12 8 2>;
+ dmas = <&sdma 11 7 1>, <&sdma 12 7 2>;
dma-names = "rx", "tx";
status = "disabled";
};
};
-
- iomuxc: iomuxc@20e0000 {
- compatible = "fsl,imx6q-iomuxc";
- };
};
sata: sata@2200000 {
@@ -406,23 +406,29 @@
&hdmi {
compatible = "fsl,imx6q-hdmi";
- port@2 {
- reg = <2>;
+ ports {
+ port@2 {
+ reg = <2>;
- hdmi_mux_2: endpoint {
- remote-endpoint = <&ipu2_di0_hdmi>;
+ hdmi_mux_2: endpoint {
+ remote-endpoint = <&ipu2_di0_hdmi>;
+ };
};
- };
- port@3 {
- reg = <3>;
+ port@3 {
+ reg = <3>;
- hdmi_mux_3: endpoint {
- remote-endpoint = <&ipu2_di1_hdmi>;
+ hdmi_mux_3: endpoint {
+ remote-endpoint = <&ipu2_di1_hdmi>;
+ };
};
};
};
+&iomuxc {
+ compatible = "fsl,imx6q-iomuxc";
+};
+
&ipu1_csi1 {
ipu1_csi1_from_mipi_vc1: endpoint {
remote-endpoint = <&mipi_vc1_to_ipu1_csi1>;
diff --git a/arch/arm/dts/imx6qdl-aristainetos2-common.dtsi b/arch/arm/dts/imx6qdl-aristainetos2-common.dtsi
index 570143694e8a..dd683dc2ca38 100644
--- a/arch/arm/dts/imx6qdl-aristainetos2-common.dtsi
+++ b/arch/arm/dts/imx6qdl-aristainetos2-common.dtsi
@@ -344,6 +344,7 @@
};
&pwm1 {
+ #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
diff --git a/arch/arm/dts/imx6qdl-cubox-i.dtsi b/arch/arm/dts/imx6qdl-cubox-i.dtsi
index e3be453d8a4a..1e530d892b76 100644
--- a/arch/arm/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/dts/imx6qdl-cubox-i.dtsi
@@ -55,12 +55,12 @@
pinctrl-0 = <&pinctrl_cubox_i_ir>;
};
- pwmleds {
+ led-controller {
compatible = "pwm-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cubox_i_pwm1>;
- front {
+ led-1 {
active-low;
label = "imx6:red:front";
max-brightness = <248>;
@@ -233,6 +233,7 @@
};
&pwm1 {
+ #pwm-cells = <2>;
status = "okay";
};
diff --git a/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi b/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi
index bf6b3a5ce07d..fe72650295a5 100644
--- a/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi
+++ b/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi
@@ -5,9 +5,9 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/input/input.h>
/ {
chosen {
@@ -263,6 +263,10 @@
status = "okay";
};
+&usbh1 {
+ disable-over-current;
+};
+
&usdhc2 { /* SD card */
status = "okay";
};
diff --git a/arch/arm/dts/imx6qdl-dhcom-som.dtsi b/arch/arm/dts/imx6qdl-dhcom-som.dtsi
index 5d10c40313cb..5befbe13d1a3 100644
--- a/arch/arm/dts/imx6qdl-dhcom-som.dtsi
+++ b/arch/arm/dts/imx6qdl-dhcom-som.dtsi
@@ -132,14 +132,15 @@
#size-cells = <0>;
ethphy0: ethernet-phy@0 { /* SMSC LAN8710Ai */
- compatible = "ethernet-phy-ieee802.3-c22";
+ compatible = "ethernet-phy-id0007.c0f0",
+ "ethernet-phy-ieee802.3-c22";
interrupt-parent = <&gpio4>;
interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&pinctrl_ethphy0>;
pinctrl-names = "default";
reg = <0>;
- reset-assert-us = <1000>;
- reset-deassert-us = <1000>;
+ reset-assert-us = <500>;
+ reset-deassert-us = <500>;
reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
smsc,disable-energy-detect; /* Make plugin detection reliable */
};
@@ -728,6 +729,7 @@
pinctrl_usbh1: usbh1-grp {
fsl,pins = <
MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x120b0
+ MX6QDL_PAD_EIM_D30__USB_H1_OC 0x1b0b1
>;
};
diff --git a/arch/arm/dts/imx6qdl-gw51xx.dtsi b/arch/arm/dts/imx6qdl-gw51xx.dtsi
index 812acf7ab824..069c27fab432 100644
--- a/arch/arm/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/dts/imx6qdl-gw51xx.dtsi
@@ -13,8 +13,8 @@
led0 = &led0;
led1 = &led1;
nand = &gpmi;
- usb0 = &usbotg;
- usb1 = &usbh1;
+ usb0 = &usbh1;
+ usb1 = &usbotg;
};
chosen {
@@ -129,8 +129,6 @@
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
- phy-reset-duration = <10>;
- phy-reset-post-delay = <100>;
status = "okay";
};
@@ -452,7 +450,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
- dr_mode = "otg";
status = "okay";
};
diff --git a/arch/arm/dts/imx6qdl-gw52xx.dtsi b/arch/arm/dts/imx6qdl-gw52xx.dtsi
index 81a9ce38b9b1..b1df2beb2832 100644
--- a/arch/arm/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/dts/imx6qdl-gw52xx.dtsi
@@ -13,11 +13,10 @@
led0 = &led0;
led1 = &led1;
led2 = &led2;
- mmc0 = &usdhc3;
nand = &gpmi;
ssi0 = &ssi1;
- usb0 = &usbotg;
- usb1 = &usbh1;
+ usb0 = &usbh1;
+ usb1 = &usbotg;
};
chosen {
@@ -33,8 +32,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
user-pb {
label = "user_pb";
@@ -195,8 +192,6 @@
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
- phy-reset-duration = <10>;
- phy-reset-post-delay = <100>;
status = "okay";
};
@@ -547,7 +542,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
- dr_mode = "otg";
status = "okay";
};
diff --git a/arch/arm/dts/imx6qdl-gw53xx.dtsi b/arch/arm/dts/imx6qdl-gw53xx.dtsi
index 77ac103c2d9f..a0710d562766 100644
--- a/arch/arm/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/dts/imx6qdl-gw53xx.dtsi
@@ -13,11 +13,10 @@
led0 = &led0;
led1 = &led1;
led2 = &led2;
- mmc0 = &usdhc3;
nand = &gpmi;
ssi0 = &ssi1;
- usb0 = &usbotg;
- usb1 = &usbh1;
+ usb0 = &usbh1;
+ usb1 = &usbotg;
};
chosen {
@@ -33,8 +32,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
user-pb {
label = "user_pb";
@@ -137,8 +134,7 @@
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
- enable-active-high;
+ regulator-always-on;
};
reg_usb_otg_vbus: regulator-usb-otg-vbus {
@@ -189,8 +185,6 @@
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
- phy-reset-duration = <10>;
- phy-reset-post-delay = <100>;
status = "okay";
};
@@ -545,14 +539,11 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
- dr_mode = "otg";
status = "okay";
};
&usbh1 {
vbus-supply = <®_usb_h1_vbus>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbh1>;
status = "okay";
};
@@ -602,7 +593,6 @@
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
- MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0
>;
};
@@ -723,12 +713,6 @@
>;
};
- pinctrl_usbh1: usbh1grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
- >;
- };
-
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
diff --git a/arch/arm/dts/imx6qdl-gw54xx.dtsi b/arch/arm/dts/imx6qdl-gw54xx.dtsi
index 98c81e9c9b5b..cda48bf2f168 100644
--- a/arch/arm/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/dts/imx6qdl-gw54xx.dtsi
@@ -14,11 +14,10 @@
led0 = &led0;
led1 = &led1;
led2 = &led2;
- mmc0 = &usdhc3;
nand = &gpmi;
ssi0 = &ssi1;
- usb0 = &usbotg;
- usb1 = &usbh1;
+ usb0 = &usbh1;
+ usb1 = &usbotg;
};
chosen {
@@ -34,8 +33,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
user-pb {
label = "user_pb";
@@ -146,8 +143,7 @@
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;
- enable-active-high;
+ regulator-always-on;
};
reg_usb_otg_vbus: regulator@3 {
@@ -226,8 +222,6 @@
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
- phy-reset-duration = <10>;
- phy-reset-post-delay = <100>;
status = "okay";
};
@@ -615,14 +609,11 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
- dr_mode = "otg";
status = "okay";
};
&usbh1 {
vbus-supply = <®_usb_h1_vbus>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbh1>;
status = "okay";
};
@@ -680,7 +671,6 @@
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
- MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0
>;
};
@@ -818,12 +808,6 @@
>;
};
- pinctrl_usbh1: usbh1grp {
- fsl,pins = <
- MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
- >;
- };
-
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
diff --git a/arch/arm/dts/imx6qdl-gw551x.dtsi b/arch/arm/dts/imx6qdl-gw551x.dtsi
index c0ffea16d81e..435dec6338fe 100644
--- a/arch/arm/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/dts/imx6qdl-gw551x.dtsi
@@ -57,8 +57,8 @@
led0 = &led0;
nand = &gpmi;
ssi0 = &ssi1;
- usb0 = &usbotg;
- usb1 = &usbh1;
+ usb0 = &usbh1;
+ usb1 = &usbotg;
};
chosen {
@@ -67,8 +67,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
user-pb {
label = "user_pb";
@@ -536,7 +534,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
- dr_mode = "otg";
status = "okay";
};
diff --git a/arch/arm/dts/imx6qdl-gw552x.dtsi b/arch/arm/dts/imx6qdl-gw552x.dtsi
index b853399aec67..2e61102ae694 100644
--- a/arch/arm/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/dts/imx6qdl-gw552x.dtsi
@@ -14,8 +14,8 @@
led1 = &led1;
led2 = &led2;
nand = &gpmi;
- usb0 = &usbotg;
- usb1 = &usbh1;
+ usb0 = &usbh1;
+ usb1 = &usbotg;
};
chosen {
@@ -24,8 +24,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
user-pb {
label = "user_pb";
@@ -120,15 +118,7 @@
regulator-name = "5P0V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- };
-
- reg_usb_h1_vbus: regulator-usbh1-vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb_h1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
- enable-active-high;
+ regulator-always-on;
};
};
@@ -399,13 +389,9 @@
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5>;
- status = "okay";
-};
+ status = "okay"; };
&usbh1 {
- vbus-supply = <®_usb_h1_vbus>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbh1>;
status = "okay";
};
@@ -414,7 +400,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
- dr_mode = "otg";
status = "okay";
};
@@ -520,12 +505,6 @@
>;
};
- pinctrl_usbh1: usbh1grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
- >;
- };
-
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059
diff --git a/arch/arm/dts/imx6qdl-gw553x.dtsi b/arch/arm/dts/imx6qdl-gw553x.dtsi
index b15c2818524f..4662408b225a 100644
--- a/arch/arm/dts/imx6qdl-gw553x.dtsi
+++ b/arch/arm/dts/imx6qdl-gw553x.dtsi
@@ -55,8 +55,8 @@
led0 = &led0;
led1 = &led1;
nand = &gpmi;
- usb0 = &usbotg;
- usb1 = &usbh1;
+ usb0 = &usbh1;
+ usb1 = &usbotg;
};
chosen {
@@ -509,7 +509,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
- dr_mode = "otg";
status = "okay";
};
diff --git a/arch/arm/dts/imx6qdl-gw560x.dtsi b/arch/arm/dts/imx6qdl-gw560x.dtsi
index 1e95267c974f..4bc4371e6bae 100644
--- a/arch/arm/dts/imx6qdl-gw560x.dtsi
+++ b/arch/arm/dts/imx6qdl-gw560x.dtsi
@@ -55,11 +55,9 @@
led0 = &led0;
led1 = &led1;
led2 = &led2;
- mmc0 = &usdhc2;
- mmc1 = &usdhc3;
ssi0 = &ssi1;
- usb0 = &usbotg;
- usb1 = &usbh1;
+ usb0 = &usbh1;
+ usb1 = &usbotg;
};
chosen {
@@ -93,8 +91,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
user-pb {
label = "user_pb";
@@ -221,8 +217,7 @@
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
- enable-active-high;
+ regulator-always-on;
};
reg_usb_otg_vbus: regulator-usb-otg-vbus {
@@ -280,8 +275,6 @@
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
- phy-reset-duration = <10>;
- phy-reset-post-delay = <100>;
status = "okay";
};
@@ -661,7 +654,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
- dr_mode = "otg";
status = "okay";
};
diff --git a/arch/arm/dts/imx6qdl-gw5903.dtsi b/arch/arm/dts/imx6qdl-gw5903.dtsi
index 6ebf6aef2f7d..1fdb7ba630f1 100644
--- a/arch/arm/dts/imx6qdl-gw5903.dtsi
+++ b/arch/arm/dts/imx6qdl-gw5903.dtsi
@@ -75,8 +75,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
user-pb {
label = "user_pb";
@@ -223,9 +221,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id";
- phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
- phy-reset-duration = <10>;
- phy-reset-post-delay = <100>;
status = "okay";
};
@@ -534,7 +529,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
- dr_mode = "host";
status = "okay";
};
diff --git a/arch/arm/dts/imx6qdl-gw5904.dtsi b/arch/arm/dts/imx6qdl-gw5904.dtsi
index 286c7a9924c2..612b6e068e28 100644
--- a/arch/arm/dts/imx6qdl-gw5904.dtsi
+++ b/arch/arm/dts/imx6qdl-gw5904.dtsi
@@ -55,9 +55,8 @@
led0 = &led0;
led1 = &led1;
led2 = &led2;
- mmc0 = &usdhc3;
- usb0 = &usbotg;
- usb1 = &usbh1;
+ usb0 = &usbh1;
+ usb1 = &usbotg;
};
chosen {
@@ -73,8 +72,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
user-pb {
label = "user_pb";
@@ -176,8 +173,7 @@
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
- enable-active-high;
+ regulator-always-on;
};
reg_usb_otg_vbus: regulator-usb-otg-vbus {
@@ -201,9 +197,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id";
- phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
- phy-reset-duration = <10>;
- phy-reset-post-delay = <100>;
status = "okay";
fixed-link {
@@ -474,6 +467,11 @@
};
};
+ crypto@60 {
+ compatible = "atmel,atecc508a";
+ reg = <0x60>;
+ };
+
imu@6a {
compatible = "st,lsm9ds1-imu";
reg = <0x6a>;
@@ -588,14 +586,11 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
- dr_mode = "otg";
status = "okay";
};
&usbh1 {
vbus-supply = <®_usb_h1_vbus>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg>;
status = "okay";
};
@@ -756,12 +751,6 @@
>;
};
- pinctrl_usbh1: usbh1grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
- >;
- };
-
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
diff --git a/arch/arm/dts/imx6qdl-gw5907.dtsi b/arch/arm/dts/imx6qdl-gw5907.dtsi
index a36b6e7048c7..fcd3bdfd6182 100644
--- a/arch/arm/dts/imx6qdl-gw5907.dtsi
+++ b/arch/arm/dts/imx6qdl-gw5907.dtsi
@@ -13,8 +13,8 @@
led0 = &led0;
led1 = &led1;
nand = &gpmi;
- usb0 = &usbotg;
- usb1 = &usbh1;
+ usb0 = &usbh1;
+ usb1 = &usbotg;
};
chosen {
@@ -23,8 +23,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
user-pb {
label = "user_pb";
@@ -131,8 +129,6 @@
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
- phy-reset-duration = <10>;
- phy-reset-post-delay = <100>;
status = "okay";
};
@@ -380,7 +376,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
- dr_mode = "otg";
status = "okay";
};
diff --git a/arch/arm/dts/imx6qdl-gw5910.dtsi b/arch/arm/dts/imx6qdl-gw5910.dtsi
index 446c1043a768..68e5ab2e27e2 100644
--- a/arch/arm/dts/imx6qdl-gw5910.dtsi
+++ b/arch/arm/dts/imx6qdl-gw5910.dtsi
@@ -13,7 +13,6 @@
led0 = &led0;
led1 = &led1;
led2 = &led2;
- mmc0 = &usdhc3;
};
chosen {
@@ -27,8 +26,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
user-pb {
label = "user_pb";
@@ -146,9 +143,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id";
- phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
- phy-reset-duration = <10>;
- phy-reset-post-delay = <100>;
status = "okay";
};
@@ -402,7 +396,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
- dr_mode = "host";
status = "okay";
};
diff --git a/arch/arm/dts/imx6qdl-gw5912.dtsi b/arch/arm/dts/imx6qdl-gw5912.dtsi
index 8fd8fdb5147c..0415bcb41640 100644
--- a/arch/arm/dts/imx6qdl-gw5912.dtsi
+++ b/arch/arm/dts/imx6qdl-gw5912.dtsi
@@ -13,10 +13,9 @@
led0 = &led0;
led1 = &led1;
led2 = &led2;
- mmc0 = &usdhc3;
nand = &gpmi;
- usb0 = &usbotg;
- usb1 = &usbh1;
+ usb0 = &usbh1;
+ usb1 = &usbotg;
};
chosen {
@@ -25,8 +24,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
user-pb {
label = "user_pb";
@@ -120,8 +117,7 @@
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;
- enable-active-high;
+ regulator-always-on;
};
};
@@ -142,9 +138,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id";
- phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
- phy-reset-duration = <10>;
- phy-reset-post-delay = <100>;
status = "okay";
};
@@ -381,8 +374,6 @@
&usbh1 {
vbus-supply = <®_usb_vbus>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbh1>;
status = "okay";
};
@@ -432,7 +423,6 @@
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
- MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0
>;
};
@@ -563,12 +553,6 @@
>;
};
- pinctrl_usbh1: usbh1grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
- >;
- };
-
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
diff --git a/arch/arm/dts/imx6qdl-gw5913.dtsi b/arch/arm/dts/imx6qdl-gw5913.dtsi
index c2c1c2b160d4..8e23cec7149e 100644
--- a/arch/arm/dts/imx6qdl-gw5913.dtsi
+++ b/arch/arm/dts/imx6qdl-gw5913.dtsi
@@ -13,8 +13,8 @@
led0 = &led0;
led1 = &led1;
nand = &gpmi;
- usb0 = &usbotg;
- usb1 = &usbh1;
+ usb0 = &usbh1;
+ usb1 = &usbotg;
};
chosen {
@@ -23,8 +23,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
user-pb {
label = "user_pb";
@@ -121,9 +119,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id";
- phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
- phy-reset-duration = <10>;
- phy-reset-post-delay = <100>;
status = "okay";
};
@@ -346,7 +341,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
- dr_mode = "host";
status = "okay";
};
diff --git a/arch/arm/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/dts/imx6qdl-hummingboard2.dtsi
index e4231331f04e..eb1ad28946d3 100644
--- a/arch/arm/dts/imx6qdl-hummingboard2.dtsi
+++ b/arch/arm/dts/imx6qdl-hummingboard2.dtsi
@@ -203,7 +203,7 @@
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard2_ecspi2>;
- cs-gpios = <&gpio2 26 0>;
+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/dts/imx6qdl-icore.dtsi b/arch/arm/dts/imx6qdl-icore.dtsi
index 7814f1ef0804..23c318d9636f 100644
--- a/arch/arm/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/dts/imx6qdl-icore.dtsi
@@ -150,10 +150,23 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
- phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>;
phy-mode = "rmii";
+ phy-handle = <ð_phy>;
status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <4000>;
+ reset-deassert-us = <4000>;
+ };
+ };
};
&gpmi {
@@ -232,6 +245,7 @@
};
&pwm3 {
+ #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "okay";
@@ -384,7 +398,7 @@
pinctrl_usbotg: usbotggrp {
fsl,pins = <
- MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
>;
};
@@ -396,6 +410,7 @@
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17070
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17070
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17070
+ MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0
>;
};
diff --git a/arch/arm/dts/imx6qdl-mba6.dtsi b/arch/arm/dts/imx6qdl-mba6.dtsi
index 874b68564a83..f4dca20669d6 100644
--- a/arch/arm/dts/imx6qdl-mba6.dtsi
+++ b/arch/arm/dts/imx6qdl-mba6.dtsi
@@ -1,48 +1,177 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (C) 2020 TQ-Systems GmbH
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
/ {
aliases {
+ mmc0 = &usdhc3;
mmc1 = &usdhc2;
+ /delete-property/ mmc2;
+ /delete-property/ mmc3;
+ rtc0 = &rtc0;
};
chosen {
- linux,stdout-path = &uart2;
stdout-path = &uart2;
};
- regulators {
- reg_mba6_3p3v: regulator@1 {
- compatible = "regulator-fixed";
- regulator-name = "supply-mba6-3p3v";
- reg = <1>;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
+ beeper: gpio-beeper {
+ compatible = "gpio-beeper";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiobeeper>;
+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_buttons: gpio-buttons {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiobuttons>;
+
+ button1 {
+ label = "s6";
+ linux,code = <KEY_F6>;
+ gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ button2 {
+ label = "s7";
+ linux,code = <KEY_F7>;
+ gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ button3 {
+ label = "s8";
+ linux,code = <KEY_F8>;
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpioled>;
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
};
- reg_otgvbus: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_reg_otgpwr>;
- regulator-name = "otg-vbus-supply";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin_supply = <®_3p3v>;
+ led2 {
+ label = "led2";
+ gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
};
};
+
+ reg_mba6_3p3v: regulator-mba6-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "supply-mba6-3p3v";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_pcie: regulator-pcie {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_regpcie>;
+ regulator-name = "supply-pcie";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ /* PCIE.PWR_EN */
+ gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ vin-supply = <®_mba6_3p3v>;
+ };
+
+ reg_vcc3v3_audio: regulator-vcc3v3-audio {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3-audio";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <®_mba6_3p3v>;
+ };
+
+ sound {
+ compatible = "fsl,imx-audio-tlv320aic32x4";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ model = "imx-audio-tlv320aic32x4";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&tlv320aic32x4>;
+ audio-asrc = <&asrc>;
+ audio-routing =
+ "IN3_L", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "IN1_L", "Line In Jack",
+ "IN1_R", "Line In Jack",
+ "Line Out Jack", "LOL",
+ "Line Out Jack", "LOR";
+ mux-int-port = <1>;
+ mux-ext-port = <3>;
+ };
+};
+
+&audmux {
+ status = "okay";
+
+ ssi0 {
+ fsl,audmux-port = <MX31_AUDMUX_PORT1_SSI0>;
+ fsl,port-config = <
+ (IMX_AUDMUX_V2_PTCR_SYN |
+ IMX_AUDMUX_V2_PTCR_TFSDIR |
+ IMX_AUDMUX_V2_PTCR_TFSEL(MX31_AUDMUX_PORT3_SSI_PINS_3) |
+ IMX_AUDMUX_V2_PTCR_TCLKDIR |
+ IMX_AUDMUX_V2_PTCR_TCSEL(MX31_AUDMUX_PORT3_SSI_PINS_3))
+ IMX_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT3_SSI_PINS_3)
+ >;
+ };
+
+ aud3 {
+ fsl,audmux-port = <MX31_AUDMUX_PORT3_SSI_PINS_3>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN
+ IMX_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT1_SSI0)
+ >;
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can2>;
+ status = "okay";
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_ecspi1_mba6>;
+ cs-gpios = <&gpio3 19 0>, <&gpio3 24 0>;
};
&fec {
phy-mode = "rgmii-id";
- phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
- phy-reset-duration = <1>;
- phy-reset-post-delay = <100>;
phy-handle = <ðphy>;
+ mac-address = [00 00 00 00 00 00];
status = "okay";
mdio {
@@ -50,126 +179,63 @@
#size-cells = <0>;
ethphy: ethernet-phy@3 {
- compatible = "ethernet-phy-id0022.1622",
- "ethernet-phy-ieee802.3-c22";
+ compatible = "ethernet-phy-ieee802.3-c22";
reg = <3>;
- force-master;
- max-speed = <1000>;
interrupt-parent = <&gpio1>;
interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <1000>;
+ reset-deassert-us = <100000>;
+ micrel,force-master;
+ max-speed = <1000>;
};
};
};
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
+&i2c1 {
+ tlv320aic32x4: audio-codec@18 {
+ compatible = "ti,tlv320aic32x4";
+ reg = <0x18>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ clock-names = "mclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_codec>;
+ ldoin-supply = <®_vcc3v3_audio>;
+ iov-supply = <®_mba6_3p3v>;
+ };
+};
- mba6 {
- pinctrl_enet: enetgrp {
- fsl,pins = <
- /* FEC phy IRQ */
- MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x00011008
- /* FEC phy reset */
- MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b099
- /* DSE = 100, 100k up, SPEED = MED */
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0xb0a0
- MX6QDL_PAD_ENET_MDC__ENET_MDC 0xb0a0
- /* DSE = 111, pull 100k up */
- MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0xb038
- MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0xb038
- MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0xb038
- MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0xb038
- MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0xb038
- MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0xb038
- /* DSE = 111, pull external */
- MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x0038
- MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x0038
- MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x0038
- MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x0038
- MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x0038
- MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x0038
- /* HYS = 1, DSE = 111, 100k up, SPEED = HIGH */
- MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0f0
- >;
- };
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio6 7 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x0001b099 /* LCD.PWR_EN */
- MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0001b099 /* LCD.RESET */
- /* LCD.CONTRAST -> Rev 0100 only, not used on Rev.0200*/
- MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0001b099
-
- MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b099
- MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x0001b099
- MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x0001b099
-
- MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0001b099
- MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x0001b099
- MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x0001b099
- MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x0001b099
- MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x0001b099
- MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x0001b099
- MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x0001b099
-
- MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x0001b099
- MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x0001b099
- MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x0001b099
- MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0001b099
- MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x0001b099
-
- MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x0001b099
- MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x0001b099
- MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x0001b099
- MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x0001b099
-
- MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x0001b099
- MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x0001b099
- MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x0001b099
-
- MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0001b099
- MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x0001b099
- >;
- };
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
- pinctrl_reg_otgpwr: regotgpwrgrp {
- fsl,pins = <
- /* OTG_PWR */
- MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0001b099
- >;
- };
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b099
- MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b099
- >;
- };
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- /* CLK: 47k Pup SPD_LOW DSE 40Ohm SRE_FAST HYS */
- MX6QDL_PAD_SD2_CLK__SD2_CLK 0x00017071
- /* SD2: 47k Pup SPD_LOW DSE 80Ohm SRE_FAST HYS */
- MX6QDL_PAD_SD2_CMD__SD2_CMD 0x00017059
- MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017059
- MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017059
- MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017059
- MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017059
-
- MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b099 /* usdhc2 CD */
- MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0001b099 /* usdhc2 WP */
- >;
- };
+&snvs_poweroff {
+ status = "okay";
+};
- pinctrl_usbotg: usbotggrp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x0001b0b0
- MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x00017059
- >;
- };
- };
+&ssi1 {
+ status = "okay";
};
&uart2 {
@@ -178,6 +244,31 @@
status = "okay";
};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ uart-has-rtscts;
+ linux,rs485-enabled-at-boot-time;
+ rs485-rts-active-low;
+ rs485-rx-during-tx;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
&usbh1 {
disable-over-current;
status = "okay";
@@ -186,22 +277,260 @@
&usbotg {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
+ power-active-high;
+ over-current-active-low;
+ srp-disable;
+ hnp-disable;
+ adp-disable;
dr_mode = "otg";
- vbus-supply = <®_otgvbus>;
status = "okay";
};
-&usdhc2 { /* Baseboard Slot */
+/* SD card slot */
+&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
vmmc-supply = <®_mba6_3p3v>;
bus-width = <4>;
no-1-8-v;
+ no-mmc;
+ no-sdio;
cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog1>;
+ /* does not work on unmodified starter kit */
+ /* fsl,ext-reset-output; */
status = "okay";
};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
+ >;
+ };
+
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0xb099
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0xb099
+ >;
+ };
+
+ pinctrl_can2: can2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0xb099
+ MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0xb099
+ >;
+ };
+
+ pinctrl_codec: codecgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0xb0 /* CLK */
+ >;
+ };
+
+ pinctrl_ecspi1_mba6: ecspimba6grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__GPIO3_IO24 0xb099 /* eCSPI1 SS2 */
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ /* FEC phy IRQ */
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x00011008
+ /* FEC phy reset */
+ MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b099
+ /* DSE = 100, 100k up, SPEED = MED */
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0xb0a0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0xb0a0
+ /* DSE = 111, pull 100k up */
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0xb038
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0xb038
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0xb038
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0xb038
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0xb038
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0xb038
+ /* DSE = 111, pull external */
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x0038
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x0038
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x0038
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x0038
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x0038
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x0038
+ /* HYS = 1, DSE = 111, 100k up, SPEED = HIGH */
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0f0
+ >;
+ };
+
+ pinctrl_gpiobeeper: gpiobeepergrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0xb099
+ >;
+ };
+
+ pinctrl_gpiobuttons: gpiobuttongrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x0001b099
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x0001b099
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b099
+ >;
+ };
+
+ pinctrl_gpioled: gpioledgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0xb099 /* LED V15 */
+ MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0xb099 /* LED V16 */
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0001b099
+
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b099
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x0001b099
+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x0001b099
+
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0001b099
+ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x0001b099
+ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x0001b099
+ MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x0001b099
+ MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x0001b099
+ MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x0001b099
+ MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x0001b099
+
+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x0001b099
+ MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x0001b099
+ MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x0001b099
+ MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0001b099
+ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x0001b099
+
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x0001b099
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x0001b099
+ MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x0001b099
+ MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x0001b099
+
+ MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x0001b099
+ MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x0001b099
+ MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x0001b099
+
+ MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0001b099
+ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x0001b099
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ /* HYS = 1, DSE = 110, 100k up, SPEED = HIGH (11)*/
+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x001b0f0 /* #PCIE.WAKE */
+ MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x001b0f0 /* #PCIE.RST */
+ MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x001b0f0 /* #PCIE.DIS */
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ /* 100 k PD, DSE 120 OHM, SPPEED LO */
+ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x00003050
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ /* 100 k PD, DSE 120 OHM, SPPEED LO */
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x00003050
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ /* 100 k PD, DSE 120 OHM, SPPEED LO */
+ MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x00003050
+ >;
+ };
+
+ pinctrl_regpcie: regpciegrp {
+ fsl,pins = <
+ /* HYS = 1, DSE = 110, PUE+PKE, SPEED = HIGH (11)*/
+ MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00130f0 /* PCIE.PWR_EN */
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b099
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b099
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ /* CLK: 47k Pup SPD_LOW DSE 40Ohm SRE_FAST HYS */
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x00017071
+ /* SD2: 47k Pup SPD_LOW DSE 80Ohm SRE_FAST HYS */
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x00017059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017059
+
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b099 /* usdhc2 CD */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0001b099 /* usdhc2 WP */
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x0001b0b0
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x00017059
+ MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x0001b099
+ >;
+ };
+
+ pinctrl_wdog1: wdog1grp {
+ fsl,pins = <
+ /* Watchdog out */
+ MX6QDL_PAD_SD1_DAT2__WDOG1_B 0x0000b099
+ >;
+ };
+};
diff --git a/arch/arm/dts/imx6qdl-mba6a.dtsi b/arch/arm/dts/imx6qdl-mba6a.dtsi
index d8b4d00d8537..df8fa169e9f6 100644
--- a/arch/arm/dts/imx6qdl-mba6a.dtsi
+++ b/arch/arm/dts/imx6qdl-mba6a.dtsi
@@ -1,39 +1,30 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (C) 2020 TQ-Systems GmbH
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>, <&pinctrl_enet_fix>;
- interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
- <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
};
&i2c1 {
- sensor1: lm75@49 {
- compatible = "lm75";
+ lm75: temperature-sensor@49 {
+ compatible = "national,lm75";
reg = <0x49>;
};
- eeprom1: m24c64@57 {
- compatible = "st,24c64", "at24";
+ m24c64_57: eeprom@57 {
+ compatible = "atmel,24c64";
reg = <0x57>;
pagesize = <32>;
};
- rtc1: ds1339@68 {
- compatible = "ds1339";
+ rtc0: rtc@68 {
+ compatible = "dallas,ds1339";
reg = <0x68>;
};
};
-
-&iomuxc {
- mba6 {
- pinctrl_enet_fix: enetfixgrp {
- fsl,pins = <
- /* ENET ping patch */
- MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
- >;
- };
- };
-};
diff --git a/arch/arm/dts/imx6qdl-mba6b.dtsi b/arch/arm/dts/imx6qdl-mba6b.dtsi
index 7489b48d82d5..7d1cd7454c7f 100644
--- a/arch/arm/dts/imx6qdl-mba6b.dtsi
+++ b/arch/arm/dts/imx6qdl-mba6b.dtsi
@@ -1,6 +1,10 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (C) 2020 TQ-Systems GmbH
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
&fec {
pinctrl-names = "default";
@@ -9,37 +13,37 @@
&i2c1 {
clock-frequency = <100000>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_recovery>;
+ scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
};
&i2c3 {
- sensor1: lm75@49 {
- compatible = "lm75";
+ lm75: temperature-sensor@49 {
+ compatible = "national,lm75";
reg = <0x49>;
};
- eeprom1: m24c64@57 {
- compatible = "st,24c64", "at24";
+ m24c64_57: eeprom@57 {
+ compatible = "atmel,24c64";
reg = <0x57>;
pagesize = <32>;
};
- rtc1: ds1339@68 {
- compatible = "ds1339";
+ rtc0: rtc@68 {
+ compatible = "dallas,ds1339";
reg = <0x68>;
};
};
&iomuxc {
- mba6 {
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899
- MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899
- >;
- };
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899
+ >;
};
-
};
diff --git a/arch/arm/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/dts/imx6qdl-nitrogen6x.dtsi
index 5094929b6d5c..904d5d051d63 100644
--- a/arch/arm/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/dts/imx6qdl-nitrogen6x.dtsi
@@ -1,69 +1,692 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2013-2019 Boundary Devices, Inc.
-// Copyright 2012 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2013 Boundary Devices, Inc.
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
-#include "imx6qdl-sabrelite.dtsi"
+/ {
+ chosen {
+ stdout-path = &uart2;
+ };
-&iomuxc {
- pinctrl_enet: enetgrp {
- fsl,pins = <
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
- MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
- MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
- MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
- MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
- MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
- MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
- MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
- MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
- MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
- MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
- MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
- MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
- MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
- MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-#undef GP_ENET_PHY_RESET
-#define GP_ENET_PHY_RESET <&gpio1 27 GPIO_ACTIVE_LOW>
- MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x030b0
-#define GPIRQ_ENET_PHY <&gpio1 28 IRQ_TYPE_LEVEL_LOW>
- MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0
- >;
- };
-
- pinctrl_hog: hoggrp {
- fsl,pins = <
- /* Spare */
- MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b0
- MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x1b0b0
- MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
- >;
- };
-
- pinctrl_uart3: uart3grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
- MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
- >;
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x40000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_2p5v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 0>;
+ enable-active-high;
+ };
+
+ reg_can_xcvr: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "CAN XCVR";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can_xcvr>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_wlan_vmmc: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wlan_vmmc>;
+ regulator-name = "reg_wlan_vmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ reg_usb_h1_vbus: regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+
+ menu {
+ label = "Menu";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_MENU>;
+ };
+
+ home {
+ label = "Home";
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ };
+
+ back {
+ label = "Back";
+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BACK>;
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx6q-nitrogen6x-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx6q-nitrogen6x-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <3>;
+ };
+
+ backlight_lcd: backlight-lcd {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_3p3v>;
+ status = "okay";
+ };
+
+ backlight_lvds: backlight-lvds {
+ compatible = "pwm-backlight";
+ pwms = <&pwm4 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_3p3v>;
+ status = "okay";
+ };
+
+ lcd_display: disp0 {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interface-pix-fmt = "bgr666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_j15>;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ lcd_display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lcd_display_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+ };
+
+ panel-lcd {
+ compatible = "okaya,rs800480t-7x0gp";
+ backlight = <&backlight_lcd>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
+
+ panel-lvds0 {
+ compatible = "hannstar,hsd100pxn1";
+ backlight = <&backlight_lvds>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ xceiver-supply = <®_can_xcvr>;
+ status = "okay";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash: flash@0 {
+ compatible = "sst,sst25vf016b", "jedec,spi-nor";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x0 0xc0000>;
+ };
+
+ partition@c0000 {
+ label = "env";
+ reg = <0xc0000 0x2000>;
+ };
+
+ partition@c2000 {
+ label = "splash";
+ reg = <0xc2000 0x13e000>;
+ };
};
};
&fec {
-#if 0
- phy-reset-gpios = GP_ENET_PHY_RESET;
-#endif
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy>;
+ phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+ interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,err006687-workaround-present;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy: ethernet-phy {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ txen-skew-ps = <0>;
+ txc-skew-ps = <3000>;
+ rxdv-skew-ps = <0>;
+ rxc-skew-ps = <3000>;
+ rxd0-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd3-skew-ps = <0>;
+ txd0-skew-ps = <0>;
+ txd1-skew-ps = <0>;
+ txd2-skew-ps = <0>;
+ txd3-skew-ps = <0>;
+ };
+ };
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ codec: sgtl5000@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+
+ rtc: rtc@6f {
+ compatible = "isil,isl1208";
+ reg = <0x6f>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ touchscreen@4 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ touchscreen@38 {
+ compatible = "edt,edt-ft5x06";
+ reg = <0x38>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6q-nitrogen6x {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* SGTL5000 sys_mclk */
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+ >;
+ };
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_can_xcvr: can-xcvrgrp {
+ fsl,pins = <
+ /* Flexcan XCVR enable */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 /* CS */
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+ /* Phy reset */
+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x000b0
+ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+ >;
+ };
+
+ pinctrl_gpio_keys: gpio-keysgrp {
+ fsl,pins = <
+ /* Power Button */
+ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+ /* Menu Button */
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+ /* Home Button */
+ MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
+ /* Back Button */
+ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+ /* Volume Up Button */
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
+ /* Volume Down Button */
+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_j15: j15grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x030b0
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+ /* power enable, high active */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 /* CD */
+ >;
+ };
+
+ pinctrl_wlan_vmmc: wlan-vmmcgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0
+ MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0
+ MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x000b0
+ MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0
+ >;
+ };
+ };
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pwm1 {
+ #pwm-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&pwm4 {
+ #pwm-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&ssi1 {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usb_h1_vbus>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
};
-&uart3 {
+&usdhc2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
- uart-has-rtscts;
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ non-removable;
+ vmmc-supply = <®_wlan_vmmc>;
+ cap-power-off-card;
+ keep-power-in-suspend;
status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+ ref-clock-frequency = <38400000>;
+ };
};
&usdhc3 {
- /delete-property/ wp-gpios;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
};
diff --git a/arch/arm/dts/imx6qdl-phytec-mira.dtsi b/arch/arm/dts/imx6qdl-phytec-mira.dtsi
index 9ebd438dce7d..120d6e997a4c 100644
--- a/arch/arm/dts/imx6qdl-phytec-mira.dtsi
+++ b/arch/arm/dts/imx6qdl-phytec-mira.dtsi
@@ -145,8 +145,11 @@
};
&i2c1 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
clock-frequency = <400000>;
status = "disabled";
@@ -185,8 +188,11 @@
};
&i2c2 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
clock-frequency = <100000>;
status = "disabled";
};
@@ -218,6 +224,7 @@
};
&pwm1 {
+ #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
@@ -255,6 +262,7 @@
pinctrl-0 = <&pinctrl_usdhc1>;
cd-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>;
no-1-8-v;
+ disable-wp;
status = "disabled";
};
@@ -298,6 +306,20 @@
>;
};
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c1_gpio: i2c1gpiogrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1
+ >;
+ };
+
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
@@ -305,10 +327,10 @@
>;
};
- pinctrl_i2c1: i2c1grp {
+ pinctrl_i2c2_gpio: i2c2gpiogrp {
fsl,pins = <
- MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
- MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1
+ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1
>;
};
diff --git a/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi
index 77d871340eb7..28a805384668 100644
--- a/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi
@@ -78,17 +78,21 @@
};
&i2c3 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c3>;
+ pinctrl-1 = <&pinctrl_i2c3_gpio>;
+ scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
clock-frequency = <400000>;
status = "okay";
eeprom@50 {
- compatible = "atmel,24c32";
+ compatible = "st,24c32", "atmel,24c32";
+ pagesize = <32>;
reg = <0x50>;
};
- pmic@58 {
+ pmic: pmic@58 {
compatible = "dlg,da9062";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
@@ -96,6 +100,8 @@
interrupt-parent = <&gpio1>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
+ gpio-controller;
+ #gpio-cells = <2>;
da9062_rtc: rtc {
compatible = "dlg,da9062-rtc";
@@ -107,6 +113,17 @@
watchdog {
compatible = "dlg,da9062-watchdog";
+ dlg,use-sw-pm;
+ };
+
+ thermal {
+ compatible = "dlg,da9062-thermal";
+ status = "disabled";
+ };
+
+ gpio {
+ compatible = "dlg,da9062-gpio";
+ status = "disabled";
};
regulators {
@@ -255,6 +272,13 @@
>;
};
+ pinctrl_i2c3_gpio: i2c3gpiogrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1
+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b8b1
+ >;
+ };
+
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
diff --git a/arch/arm/dts/imx6qdl-pico.dtsi b/arch/arm/dts/imx6qdl-pico.dtsi
index 50379d04b708..f7a56d6b160c 100644
--- a/arch/arm/dts/imx6qdl-pico.dtsi
+++ b/arch/arm/dts/imx6qdl-pico.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0 OR MIT
//
// Copyright 2018 Technexion Ltd.
//
@@ -9,11 +9,6 @@
#include <dt-bindings/gpio/gpio.h>
/ {
- aliases {
- mmc0 = &usdhc3;
- usb0 = &usbotg;
- };
-
chosen {
stdout-path = &uart1;
};
@@ -42,6 +37,22 @@
regulator-always-on;
};
+ reg_1p5v: regulator-1p5v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P5V";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+
+ reg_2p8v: regulator-2p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "2P8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
reg_usb_otg_vbus: regulator-usb-otg-vbus {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg_vbus>;
@@ -51,6 +62,81 @@
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
};
+
+ codec_osc: clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
+ sound {
+ compatible = "fsl,imx-audio-sgtl5000";
+ model = "imx6-pico-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <3>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm4 0 50000 0>;
+ brightness-levels = <0 36 72 108 144 180 216 255>;
+ default-brightness-level = <6>;
+ status = "okay";
+ };
+
+ reg_lcd_3v3: regulator-lcd-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_lcd>;
+ regulator-name = "lcd-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ lcd_display: disp0 {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1>;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ lcd_display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lcd_display_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+ };
+
+ panel {
+ compatible = "vxt,vl050-8048nt-c01";
+ backlight = <&backlight>;
+ power-supply = <®_lcd_3v3>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
};
&audmux {
@@ -81,7 +167,7 @@
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
- cs-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
status = "okay";
};
@@ -90,7 +176,18 @@
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+ phy-handle = <&phy>;
status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy: ethernet-phy@1 {
+ reg = <1>;
+ qca,clk-out-frequency = <125000000>;
+ };
+ };
};
&hdmi {
@@ -102,6 +199,15 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+
+ sgtl5000: audio-codec@a {
+ #sound-dai-cells = <0>;
+ reg = <0x0a>;
+ compatible = "fsl,sgtl5000";
+ clocks = <&codec_osc>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_1p8v>;
+ };
};
&i2c2 {
@@ -109,6 +215,40 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
+
+ touchscreen@38 {
+ compatible = "edt,edt-ft5x06";
+ reg = <0x38>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio5 27 GPIO_ACTIVE_LOW>;
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <480>;
+ wakeup-source;
+ };
+
+ camera@3c {
+ compatible = "ovti,ov5645";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ov5645>;
+ reg = <0x3c>;
+ clocks = <&clks IMX6QDL_CLK_CKO2>;
+ clock-names = "xclk";
+ clock-frequency = <24000000>;
+ vdddo-supply = <®_1p8v>;
+ vdda-supply = <®_2p8v>;
+ vddd-supply = <®_1p5v>;
+ enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+
+ port {
+ ov5645_to_mipi_csi2: endpoint {
+ remote-endpoint = <&mipi_csi2_in>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
};
&i2c3 {
@@ -117,11 +257,28 @@
status = "okay";
};
+&ipu1_di0_disp0 {
+ remote-endpoint = <&lcd_display_in>;
+};
+
+&mipi_csi {
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ mipi_csi2_in: endpoint {
+ remote-endpoint = <&ov5645_to_mipi_csi2>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+};
+
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie_reset>;
reset-gpio = <&gpio5 21 GPIO_ACTIVE_LOW>;
- status = "okay";
};
&pwm1 {
@@ -161,14 +318,14 @@
&uart2 { /* Bluetooth module */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
@@ -219,7 +376,6 @@
pinctrl_hog: hoggrp {
fsl,pins = <
MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x4001b0b5 /* PICO_P24 */
- MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x4001b0b5 /* PICO_P25 */
MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x4001b0b5 /* PICO_P26 */
MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x4001b0b5 /* PICO_P28 */
MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b0b5 /* PICO_P30 */
@@ -316,6 +472,48 @@
>;
};
+ pinctrl_ipu1: ipu1grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
+ MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x10
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
+ >;
+ };
+
+ pinctrl_ov5645: ov5645grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x0b0b0
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0b0b0
+ MX6QDL_PAD_GPIO_3__CCM_CLKO2 0x000b0
+ >;
+ };
+
pinctrl_pcie_reset: pciegrp {
fsl,pins = <
MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x130b0
@@ -346,6 +544,12 @@
>;
};
+ pinctrl_reg_lcd: reglcdgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
diff --git a/arch/arm/dts/imx6qdl-sabreauto.dtsi b/arch/arm/dts/imx6qdl-sabreauto.dtsi
index 28a7fdb0f1ef..1368a4762037 100644
--- a/arch/arm/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/dts/imx6qdl-sabreauto.dtsi
@@ -12,6 +12,7 @@
};
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x80000000>;
};
@@ -75,39 +76,49 @@
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ reg_audio: regulator-audio {
+ compatible = "regulator-fixed";
+ regulator-name = "cs42888_supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- reg_audio: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "cs42888_supply";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ reg_usb_h1_vbus: regulator-usb-h1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- reg_usb_h1_vbus: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "usb_h1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- reg_usb_otg_vbus: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "usb_otg_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_can_en: regulator-can-en {
+ compatible = "regulator-fixed";
+ regulator-name = "can-en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&max7310_b 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_can_stby: regulator-can-stby {
+ compatible = "regulator-fixed";
+ regulator-name = "can-stby";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_can_en>;
};
sound-cs42888 {
@@ -219,6 +230,8 @@
accelerometer@1c {
compatible = "fsl,mma8451";
reg = <0x1c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mma8451_int>;
interrupt-parent = <&gpio6>;
interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
};
@@ -254,12 +267,12 @@
};
&ecspi1 {
- cs-gpios = <&gpio3 19 0>;
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
status = "disabled"; /* pin conflict with WEIM NOR */
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p32", "jedec,spi-nor";
@@ -285,6 +298,21 @@
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
fsl,err006687-workaround-present;
+ fsl,magic-packet;
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_can_stby>;
+ status = "disabled"; /* pin conflict with fec */
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_can_stby>;
status = "okay";
};
@@ -503,6 +531,20 @@
>;
};
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x17059
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x17059
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x17059
+ MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x17059
+ >;
+ };
+
pinctrl_gpio_keys: gpiokeysgrp {
fsl,pins = <
MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x1b0b0
@@ -589,6 +631,12 @@
>;
};
+ pinctrl_mma8451_int: mma8451intgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0xb0b1
+ >;
+ };
+
pinctrl_pwm3: pwm1grp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
@@ -753,11 +801,16 @@
};
&pwm3 {
+ #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "okay";
};
+&pcie {
+ status = "okay";
+};
+
&spdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spdif>;
diff --git a/arch/arm/dts/imx6qdl-sabrelite.dtsi b/arch/arm/dts/imx6qdl-sabrelite.dtsi
index 673a19c3df47..901b9a761b66 100644
--- a/arch/arm/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/dts/imx6qdl-sabrelite.dtsi
@@ -1,343 +1,726 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2013-2019 Boundary Devices, Inc.
-// Copyright 2012 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
#include <dt-bindings/clock/imx6qdl-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- pinctrl_ecspi1: ecspi1grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
- MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
- MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x000b1
-#define GP_ECSPI1_NOR_CS <&gpio3 19 GPIO_ACTIVE_LOW>
- MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x0b0b1
- >;
+/ {
+ chosen {
+ stdout-path = &uart2;
};
- pinctrl_enet: enetgrp {
- fsl,pins = <
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
- MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
- MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
- MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
- MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
- MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
- MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
- MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
- MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
- MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
- MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
- MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
- MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
- MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
- MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-#undef GP_ENET_PHY_RESET
-#define GP_ENET_PHY_RESET <&gpio3 23 GPIO_ACTIVE_LOW>
- MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x030b0
-#define GPIRQ_ENET_PHY <&gpio1 28 IRQ_TYPE_LEVEL_LOW>
- MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0
- >;
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x40000000>;
};
- pinctrl_hog: hoggrp {
- fsl,pins = <
- /* Spare */
- MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x1b0b0
- >;
- };
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_2p5v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
- MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
- >;
- };
+ reg_3p3v: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- pinctrl_i2c1_1: i2c1-1grp {
- fsl,pins = <
-#define GP_I2C1_SCL <&gpio3 21 GPIO_ACTIVE_HIGH>
- MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1
-#define GP_I2C1_SDA <&gpio3 28 GPIO_ACTIVE_HIGH>
- MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1
- >;
- };
+ reg_usb_otg_vbus: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 0>;
+ enable-active-high;
+ };
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
- MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
- >;
- };
+ reg_can_xcvr: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "CAN XCVR";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can_xcvr>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ };
- pinctrl_i2c2_1: i2c2-1grp {
- fsl,pins = <
-#define GP_I2C2_SCL <&gpio4 12 GPIO_ACTIVE_HIGH>
- MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1
-#define GP_I2C2_SDA <&gpio4 13 GPIO_ACTIVE_HIGH>
- MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1
- >;
- };
+ reg_1p5v: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "1P5V";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
- pinctrl_i2c3: i2c3grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
- MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
-#define GPIRQ_I2C3_J7 <&gpio1 9 IRQ_TYPE_EDGE_FALLING>
-#define GP_I2C3_J7 <&gpio1 9 GPIO_ACTIVE_LOW>
- MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
- >;
- };
+ reg_1p8v: regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
- pinctrl_i2c3_1: i2c3-1grp {
- fsl,pins = <
-#define GP_I2C3_SCL <&gpio1 5 GPIO_ACTIVE_HIGH>
- MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b8b1
-#define GP_I2C3_SDA <&gpio7 11 GPIO_ACTIVE_HIGH>
- MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x4001b8b1
- >;
- };
+ reg_2p8v: regulator@6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "2P8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
- pinctrl_pwm1: pwm1grp {
- fsl,pins = <
- MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
- >;
+ reg_usb_h1_vbus: regulator@7 {
+ compatible = "regulator-fixed";
+ reg = <7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
- pinctrl_pwm3: pwm3grp {
- fsl,pins = <
- MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
- >;
+ mipi_xclk: mipi_xclk {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <22000000>;
+ clock-output-names = "mipi_pwm3";
+ pwms = <&pwm3 0 45>; /* 1 / 45 ns = 22 MHz */
+ status = "okay";
};
- pinctrl_pwm4: pwm4grp {
- fsl,pins = <
- MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
- >;
- };
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+
+ menu {
+ label = "Menu";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_MENU>;
+ };
+
+ home {
+ label = "Home";
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ };
- pinctrl_reg_usbotg_vbus: reg-usbotg-vbusgrp {
- fsl,pins = <
-#define GP_REG_USBOTG <&gpio3 22 GPIO_ACTIVE_HIGH>
- MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x030b0
- >;
+ back {
+ label = "Back";
+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BACK>;
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
};
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
- MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
- >;
+ sound {
+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx6q-sabrelite-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <4>;
};
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
- >;
+ backlight_lcd: backlight-lcd {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_3p3v>;
+ status = "okay";
};
- pinctrl_usbh1: usbh1grp {
- fsl,pins = <
-#define GP_USBH1_HUB_RESET <&gpio7 12 GPIO_ACTIVE_LOW>
- MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x0b0b0
- >;
+ backlight_lvds: backlight-lvds {
+ compatible = "pwm-backlight";
+ pwms = <&pwm4 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_3p3v>;
+ status = "okay";
};
- pinctrl_usbotg: usbotggrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
- MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
- >;
+ lcd_display: disp0 {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interface-pix-fmt = "bgr666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_j15>;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ lcd_display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lcd_display_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
};
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-#define GP_USDHC3_CD <&gpio7 0 GPIO_ACTIVE_LOW>
- MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
-#define GP_USDHC3_WP <&gpio7 1 GPIO_ACTIVE_HIGH>
- MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b0
- >;
+ panel-lcd {
+ compatible = "okaya,rs800480t-7x0gp";
+ backlight = <&backlight_lcd>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
};
- pinctrl_usdhc4: usdhc4grp {
- fsl,pins = <
- MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
- MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
- MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
- MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
- MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
- MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
-#define GP_USDHC4_CD <&gpio2 6 GPIO_ACTIVE_LOW>
- MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0
- >;
+ panel-lvds0 {
+ compatible = "hannstar,hsd100pxn1";
+ backlight = <&backlight_lvds>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
};
};
-/ {
- aliases {
- mmc0 = &usdhc3;
- mmc1 = &usdhc4;
- pwm_lcd = &pwm1;
- pwm_lvds = &pwm4;
- };
+&ipu1_csi0_from_ipu1_csi0_mux {
+ bus-width = <8>;
+ data-shift = <12>; /* Lines 19:12 used */
+ hsync-active = <1>;
+ vync-active = <1>;
+};
- chosen {
- stdout-path = &uart2;
- };
+&ipu1_csi0_mux_from_parallel_sensor {
+ remote-endpoint = <&ov5642_to_ipu1_csi0_mux>;
+};
- memory {
- reg = <0x10000000 0x40000000>;
- };
+&ipu1_csi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
- reg_3p3v: regulator-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
- reg_usb_otg_vbus: regulator-usb-otg-vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb_otg_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = GP_REG_USBOTG;
- enable-active-high;
- };
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ xceiver-supply = <®_can_xcvr>;
+ status = "okay";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
};
&ecspi1 {
- cs-gpios = GP_ECSPI1_NOR_CS;
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
compatible = "sst,sst25vf016b", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
- mtd@00000000 {
- label = "U-Boot";
- reg = <0x0 0xC0000>;
- };
-
- mtd@000C0000 {
- label = "env";
- reg = <0xC0000 0x2000>;
- };
- mtd@000C2000 {
- label = "splash";
- reg = <0xC2000 0x13e000>;
- };
};
};
&fec {
- phy-handle = <ðphy>;
- phy-mode = "rgmii";
-#if 0
- phy-reset-gpios = GP_ENET_PHY_RESET;
-#endif
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
- rxc-skew-ps = <3000>;
- rxd0-skew-ps = <0>;
- rxd1-skew-ps = <0>;
- rxd2-skew-ps = <0>;
- rxd3-skew-ps = <0>;
- rxdv-skew-ps = <0>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy>;
+ phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
status = "okay";
- txc-skew-ps = <3000>;
- txd0-skew-ps = <0>;
- txd1-skew-ps = <0>;
- txd2-skew-ps = <0>;
- txd3-skew-ps = <0>;
- txen-skew-ps = <0>;
mdio {
- #address-cells = <0>;
- #size-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
ethphy: ethernet-phy {
- interrupts-extended = GPIRQ_ENET_PHY;
+ compatible = "ethernet-phy-ieee802.3-c22";
+ txen-skew-ps = <0>;
+ txc-skew-ps = <3000>;
+ rxdv-skew-ps = <0>;
+ rxc-skew-ps = <3000>;
+ rxd0-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd3-skew-ps = <0>;
+ txd0-skew-ps = <0>;
+ txd1-skew-ps = <0>;
+ txd2-skew-ps = <0>;
+ txd3-skew-ps = <0>;
};
};
};
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
&i2c1 {
clock-frequency = <100000>;
- pinctrl-names = "default", "gpio";
+ pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
- pinctrl-1 = <&pinctrl_i2c1_1>;
- scl-gpios = GP_I2C1_SCL;
- sda-gpios = GP_I2C1_SDA;
status = "okay";
+
+ codec: sgtl5000@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_3p3v>;
+ };
};
&i2c2 {
clock-frequency = <100000>;
- pinctrl-names = "default", "gpio";
+ pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
- pinctrl-1 = <&pinctrl_i2c2_1>;
- scl-gpios = GP_I2C2_SCL;
- sda-gpios = GP_I2C2_SDA;
status = "okay";
- hdmi_edid: edid@50 {
- compatible = "fsl,imx6-hdmi-i2c";
- reg = <0x50>;
+ ov5640: camera@40 {
+ compatible = "ovti,ov5640";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ov5640>;
+ reg = <0x40>;
+ clocks = <&mipi_xclk>;
+ clock-names = "xclk";
+ DOVDD-supply = <®_1p8v>;
+ AVDD-supply = <®_2p8v>;
+ DVDD-supply = <®_1p5v>;
+ reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* NANDF_D5 */
+ powerdown-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* NANDF_WP_B */
+
+ port {
+ ov5640_to_mipi_csi2: endpoint {
+ remote-endpoint = <&mipi_csi2_in>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+
+ ov5642: camera@42 {
+ compatible = "ovti,ov5642";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ov5642>;
+ clocks = <&clks IMX6QDL_CLK_CKO2>;
+ clock-names = "xclk";
+ reg = <0x42>;
+ reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ powerdown-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ gp-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+
+ port {
+ ov5642_to_ipu1_csi0_mux: endpoint {
+ remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+ bus-width = <8>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ };
+ };
};
};
&i2c3 {
clock-frequency = <100000>;
- pinctrl-names = "default", "gpio";
+ pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
- pinctrl-1 = <&pinctrl_i2c3_1>;
- scl-gpios = GP_I2C3_SCL;
- sda-gpios = GP_I2C3_SDA;
status = "okay";
};
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6q-sabrelite {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* SGTL5000 sys_mclk */
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0
+ >;
+ };
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
+ MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
+ MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
+ MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_can_xcvr: can-xcvrgrp {
+ fsl,pins = <
+ /* Flexcan XCVR enable */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 /* CS */
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+ /* Phy reset */
+ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x000b0
+ >;
+ };
+
+ pinctrl_gpio_keys: gpio-keysgrp {
+ fsl,pins = <
+ /* Power Button */
+ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+ /* Menu Button */
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+ /* Home Button */
+ MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
+ /* Back Button */
+ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+ /* Volume Up Button */
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
+ /* Volume Down Button */
+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_ipu1_csi0: ipu1csi0grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0
+ MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
+ MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0
+ MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0
+ MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x1b0b0
+ >;
+ };
+
+ pinctrl_j15: j15grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
+ >;
+ };
+
+ pinctrl_ov5640: ov5640grp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x000b0
+ MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0
+ >;
+ };
+
+ pinctrl_ov5642: ov5642grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
+ MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x130b0
+ MX6QDL_PAD_GPIO_3__CCM_CLKO2 0x000b0
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x030b0
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+ /* power enable, high active */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */
+ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0 /* WP */
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 /* CD */
+ >;
+ };
+ };
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
&pcie {
status = "okay";
};
&pwm1 {
+ #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
};
&pwm3 {
+ #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "okay";
};
&pwm4 {
+ #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
status = "okay";
};
+&ssi1 {
+ status = "okay";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
@@ -351,10 +734,7 @@
};
&usbh1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbh1>;
- disable-over-current;
- reset-gpios = GP_USBH1_HUB_RESET;
+ vbus-supply = <®_usb_h1_vbus>;
status = "okay";
};
@@ -369,8 +749,8 @@
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
- cd-gpios = GP_USDHC3_CD;
- wp-gpios = GP_USDHC3_WP;
+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
vmmc-supply = <®_3p3v>;
status = "okay";
};
@@ -378,7 +758,21 @@
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
- cd-gpios = GP_USDHC4_CD;
+ cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
vmmc-supply = <®_3p3v>;
status = "okay";
};
+
+&mipi_csi {
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ mipi_csi2_in: endpoint {
+ remote-endpoint = <&ov5640_to_mipi_csi2>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+};
diff --git a/arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi b/arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi
index 45f02b19c7ee..8cd34a794c62 100644
--- a/arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi
+++ b/arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi
@@ -5,6 +5,12 @@
#include "imx6qdl-u-boot.dtsi"
+/ {
+ aliases {
+ mmc1 = &usdhc3;
+ };
+};
+
&usdhc3 {
u-boot,dm-spl;
};
diff --git a/arch/arm/dts/imx6qdl-sabresd.dtsi b/arch/arm/dts/imx6qdl-sabresd.dtsi
index eddb3901745e..37482a9023fc 100644
--- a/arch/arm/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/dts/imx6qdl-sabresd.dtsi
@@ -8,64 +8,62 @@
#include <dt-bindings/input/input.h>
/ {
- aliases {
- mmc1 = &usdhc3;
- };
-
chosen {
stdout-path = &uart1;
};
memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&swbst_reg>;
+ };
- reg_usb_otg_vbus: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "usb_otg_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 0>;
- enable-active-high;
- vin-supply = <&swbst_reg>;
- };
+ reg_usb_h1_vbus: regulator-usb-h1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&swbst_reg>;
+ };
- reg_usb_h1_vbus: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "usb_h1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 29 0>;
- enable-active-high;
- vin-supply = <&swbst_reg>;
- };
-
- reg_audio: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "wm8962-supply";
- gpio = <&gpio4 10 0>;
- enable-active-high;
- };
-
- reg_pcie: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pcie_reg>;
- regulator-name = "MPCIE_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 19 0>;
- enable-active-high;
- };
+ reg_audio: regulator-audio {
+ compatible = "regulator-fixed";
+ regulator-name = "wm8962-supply";
+ gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_pcie: regulator-pcie {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie_reg>;
+ regulator-name = "MPCIE_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_sensors: regulator-sensors {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sensors_reg>;
+ regulator-name = "sensors-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
gpio-keys {
@@ -99,17 +97,24 @@
compatible = "fsl,imx6q-sabresd-wm8962",
"fsl,imx-audio-wm8962";
model = "wm8962-audio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hp>;
ssi-controller = <&ssi2>;
audio-codec = <&codec>;
+ audio-asrc = <&asrc>;
audio-routing =
"Headphone Jack", "HPOUTL",
"Headphone Jack", "HPOUTR",
"Ext Spk", "SPKOUTL",
"Ext Spk", "SPKOUTR",
"AMIC", "MICBIAS",
- "IN3R", "AMIC";
+ "IN3R", "AMIC",
+ "DMIC", "MICBIAS",
+ "DMICDAT", "DMIC";
mux-int-port = <2>;
mux-ext-port = <3>;
+ hp-det-gpio = <&gpio7 8 GPIO_ACTIVE_LOW>;
+ mic-det-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
backlight_lvds: backlight-lvds {
@@ -187,12 +192,12 @@
};
&ecspi1 {
- cs-gpios = <&gpio4 9 0>;
+ cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p32", "jedec,spi-nor";
@@ -205,8 +210,21 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id";
- phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+ phy-handle = <&phy>;
+ fsl,magic-packet;
status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy: ethernet-phy@1 {
+ reg = <1>;
+ qca,clk-out-frequency = <125000000>;
+ reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ };
+ };
};
&hdmi {
@@ -244,6 +262,17 @@
>;
};
+ accelerometer@1c {
+ compatible = "fsl,mma8451";
+ reg = <0x1c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_mma8451_int>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <®_sensors>;
+ vddio-supply = <®_sensors>;
+ };
+
ov5642: camera@3c {
compatible = "ovti,ov5642";
pinctrl-names = "default";
@@ -276,6 +305,16 @@
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
+ touchscreen@4 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_egalax_int>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+ };
+
ov5640: camera@3c {
compatible = "ovti,ov5640";
pinctrl-names = "default";
@@ -414,6 +453,27 @@
interrupts = <7 2>;
wakeup-gpios = <&gpio6 7 0>;
};
+
+ magnetometer@e {
+ compatible = "fsl,mag3110";
+ reg = <0x0e>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_mag3110_int>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <16 IRQ_TYPE_EDGE_RISING>;
+ vdd-supply = <®_sensors>;
+ vddio-supply = <®_sensors>;
+ };
+
+ light-sensor@44 {
+ compatible = "isil,isl29023";
+ reg = <0x44>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_isl29023_int>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ vcc-supply = <®_sensors>;
+ };
};
&iomuxc {
@@ -488,6 +548,13 @@
>;
};
+ pinctrl_hp: hpgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b0
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
@@ -495,6 +562,12 @@
>;
};
+ pinctrl_i2c1_mma8451_int: i2c1mma8451intgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0xb0b1
+ >;
+ };
+
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
@@ -502,6 +575,12 @@
>;
};
+ pinctrl_i2c2_egalax_int: i2c2egalaxintgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0
+ >;
+ };
+
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
@@ -509,6 +588,18 @@
>;
};
+ pinctrl_i2c3_isl29023_int: i2c3isl29023intgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0xb0b1
+ >;
+ };
+
+ pinctrl_i2c3_mag3110_int: i2c3mag3110intgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D16__GPIO3_IO16 0xb0b1
+ >;
+ };
+
pinctrl_ipu1_csi0: ipu1csi0grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0
@@ -557,6 +648,12 @@
>;
};
+ pinctrl_sensors_reg: sensorsreggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1b0b0
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
@@ -658,6 +755,7 @@
};
&pwm1 {
+ #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
@@ -675,10 +773,22 @@
vin-supply = <&sw1c_reg>;
};
+®_vdd1p1 {
+ vin-supply = <&vgen5_reg>;
+};
+
+®_vdd2p5 {
+ vin-supply = <&vgen5_reg>;
+};
+
&snvs_poweroff {
status = "okay";
};
+&snvs_pwrkey {
+ status = "okay";
+};
+
&ssi2 {
status = "okay";
};
diff --git a/arch/arm/dts/imx6qdl-sr-som-ti.dtsi b/arch/arm/dts/imx6qdl-sr-som-ti.dtsi
index 44a97ba93a95..352ac585ca6b 100644
--- a/arch/arm/dts/imx6qdl-sr-som-ti.dtsi
+++ b/arch/arm/dts/imx6qdl-sr-som-ti.dtsi
@@ -153,6 +153,7 @@
bus-width = <4>;
keep-power-in-suspend;
mmc-pwrseq = <&pwrseq_ti_wifi>;
+ cap-power-off-card;
non-removable;
vmmc-supply = <&vcc_3v3>;
/* vqmmc-supply = <&nvcc_sd1>; - MMC layer doesn't like it! */
diff --git a/arch/arm/dts/imx6qdl-sr-som.dtsi b/arch/arm/dts/imx6qdl-sr-som.dtsi
index b06577808ff4..f86efd0ccc40 100644
--- a/arch/arm/dts/imx6qdl-sr-som.dtsi
+++ b/arch/arm/dts/imx6qdl-sr-som.dtsi
@@ -53,9 +53,14 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
- phy-handle = <&phy>;
phy-mode = "rgmii-id";
- phy-reset-duration = <2>;
+
+ /*
+ * The PHY seems to require a long-enough reset duration to avoid
+ * some rare issues where the PHY gets stuck in an inconsistent and
+ * non-functional state at boot-up. 10ms proved to be fine .
+ */
+ phy-reset-duration = <10>;
phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
status = "okay";
@@ -63,9 +68,20 @@
#address-cells = <1>;
#size-cells = <0>;
- phy: ethernet-phy@0 {
+ /*
+ * The PHY can appear at either address 0 or 4 due to the
+ * configuration (LED) pin not being pulled sufficiently.
+ */
+ ethernet-phy@0 {
reg = <0>;
qca,clk-out-frequency = <125000000>;
+ qca,smarteee-tw-us-1g = <24>;
+ };
+
+ ethernet-phy@4 {
+ reg = <4>;
+ qca,clk-out-frequency = <125000000>;
+ qca,smarteee-tw-us-1g = <24>;
};
};
};
diff --git a/arch/arm/dts/imx6qdl-tqma6.dtsi b/arch/arm/dts/imx6qdl-tqma6.dtsi
index 85eb3d8da17b..344ea935c7da 100644
--- a/arch/arm/dts/imx6qdl-tqma6.dtsi
+++ b/arch/arm/dts/imx6qdl-tqma6.dtsi
@@ -1,40 +1,30 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (C) 2020 TQ-Systems GmbH
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
-/ {
- aliases {
- mmc0 = &usdhc3;
- /delete-property/ mmc1;
- /delete-property/ mmc2;
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
- reg_3p3v: regulator@0 {
- compatible = "regulator-fixed";
- regulator-name = "supply-3p3v";
- reg = <0>;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+/ {
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "supply-3p3v";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
};
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
- fsl,spi-num-chipselects = <1>;
- cs-gpios = <&gpio3 19 0>;
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
status = "okay";
- flash: m25p80@0 {
- status = "okay";
- compatible = "micron,n25q128a13", "n25q128a13";
+ m25p80: flash@0 {
+ compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
#address-cells = <1>;
@@ -44,151 +34,163 @@
};
&iomuxc {
- tqma6 {
- pinctrl_ecspi1: ecspi1grp {
- fsl,pins = <
- /* HYS, SPEED = MED, 100k up, DSE = 011, SRE_FAST */
- MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x1b099
- MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0xb099
- MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0xb099
- /* eCSPI1 SS1 */
- MX6QDL_PAD_EIM_D19__GPIO3_IO19 0xb099
- >;
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ /* HYS, SPEED = MED, 100k up, DSE = 011, SRE_FAST */
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x1b099
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0xb099
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0xb099
+ /* eCSPI1 SS1 */
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0xb099
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899
+ >;
+ };
+
+ pinctrl_i2c1_recovery: i2c1recoverygrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b899
+ MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b899
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899
+ >;
+ };
+
+ pinctrl_i2c3_recovery: i2c3recoverygrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b899
+ MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b899
+ >;
+ };
+
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b099 /* PMIC irq */
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+ >;
+ };
+};
+
+&pmic {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ reg_vddcore: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-always-on;
};
- pinctrl_i2c1_tqma6: i2c1-tqma6grp {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899
- MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899
- >;
+ reg_vddsoc: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-always-on;
};
- pinctrl_i2c3_tqma6: i2c3-tqma6grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899
- MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899
- >;
+ reg_gen_3v3: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
- pinctrl_pmic: pmicgrp {
- fsl,pins = <
- MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b099 /* PMIC irq */
- >;
+ reg_ddr_1v5a: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-always-on;
};
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
- MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
- MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
- MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
- MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
- >;
+ reg_ddr_1v5b: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-always-on;
};
- };
-};
-&pmic {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pmic>;
- interrupt-parent = <&gpio6>;
- interrupts = <10 8>;
-
- regulators {
- reg_vddcore: sw1ab {
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <1875000>;
- regulator-always-on;
- };
-
- reg_vddsoc: sw1c {
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <1875000>;
- regulator-always-on;
- };
-
- reg_gen_3v3: sw2 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_ddr_1v5a: sw3a {
- regulator-min-microvolt = <400000>;
- regulator-max-microvolt = <1975000>;
- regulator-always-on;
- };
-
- reg_ddr_1v5b: sw3b {
- regulator-min-microvolt = <400000>;
- regulator-max-microvolt = <1975000>;
- regulator-always-on;
- };
-
- sw4_reg: sw4 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_5v_600mA: swbst {
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5150000>;
- regulator-always-on;
- };
-
- reg_snvs_3v: vsnvs {
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- reg_vrefddr: vrefddr {
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_vgen1_1v5: vgen1 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1550000>;
- /* not used */
- };
-
- reg_vgen2_1v2_eth: vgen2 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1550000>;
- regulator-always-on;
- };
-
- reg_vgen3_2v8: vgen3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_vgen4_1v8: vgen4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_vgen5_1v8_eth: vgen5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_vgen6_3v3: vgen6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_5v_600mA: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ regulator-always-on;
+ };
+
+ reg_snvs_3v: vsnvs {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ reg_vrefddr: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vgen1_1v5: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ /* not used */
+ };
+
+ reg_vgen2_1v2_eth: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
};
+
+ reg_vgen3_2v8: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vgen4_1v8: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vgen5_1v8_eth: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vgen6_3v3: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
};
/* eMMC */
@@ -198,6 +200,8 @@
vmmc-supply = <®_3p3v>;
non-removable;
disable-wp;
+ no-sd;
+ no-sdio;
bus-width = <8>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/dts/imx6qdl-tqma6a.dtsi b/arch/arm/dts/imx6qdl-tqma6a.dtsi
index f94a5d80c2c4..7dc3f0005b0f 100644
--- a/arch/arm/dts/imx6qdl-tqma6a.dtsi
+++ b/arch/arm/dts/imx6qdl-tqma6a.dtsi
@@ -1,27 +1,53 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (C) 2020 TQ-Systems GmbH
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+&fec {
+ interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,err006687-workaround-present;
+};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1_tqma6>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_recovery>;
+ scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
clock-frequency = <100000>;
status = "okay";
- pmic: pf0100@08 {
+ pmic: pmic@8 {
compatible = "fsl,pfuze100";
reg = <0x08>;
};
- sensor0: lm75@48 {
- compatible = "lm75";
+ sensor@48 {
+ compatible = "national,lm75";
reg = <0x48>;
};
- eeprom0: m24c64@50 {
- compatible = "st,24c64", "at24";
+ eeprom@50 {
+ compatible = "st,24c64", "atmel,24c64";
reg = <0x50>;
pagesize = <32>;
};
};
+&iomuxc {
+ /*
+ * This pinmuxing is required for the ERR006687 workaround. Board
+ * DTS files that enable the FEC controller with
+ * fsl,err006687-workaround-present must include this group.
+ */
+ pinctrl_enet_fix: enetfixgrp {
+ fsl,pins = <
+ /* ENET ping patch */
+ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+ >;
+ };
+};
diff --git a/arch/arm/dts/imx6qdl-tqma6b.dtsi b/arch/arm/dts/imx6qdl-tqma6b.dtsi
index 682f55370122..dd0925766440 100644
--- a/arch/arm/dts/imx6qdl-tqma6b.dtsi
+++ b/arch/arm/dts/imx6qdl-tqma6b.dtsi
@@ -1,27 +1,33 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (C) 2020 TQ-Systems GmbH
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
&i2c3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3_tqma6>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ pinctrl-1 = <&pinctrl_i2c3_recovery>;
+ scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
clock-frequency = <100000>;
status = "okay";
- pmic: pf0100@08 {
+ pmic: pmic@8 {
compatible = "fsl,pfuze100";
reg = <0x08>;
};
- sensor0: lm75@48 {
- compatible = "lm75";
+ sensor@48 {
+ compatible = "national,lm75";
reg = <0x48>;
};
- eeprom0: m24c64@50 {
- compatible = "st,24c64", "at24";
+ eeprom@50 {
+ compatible = "st,24c64", "atmel,24c64";
reg = <0x50>;
pagesize = <32>;
};
};
-
diff --git a/arch/arm/dts/imx6qdl-udoo.dtsi b/arch/arm/dts/imx6qdl-udoo.dtsi
index 2d0d102661bd..ccfa8e320be6 100644
--- a/arch/arm/dts/imx6qdl-udoo.dtsi
+++ b/arch/arm/dts/imx6qdl-udoo.dtsi
@@ -4,7 +4,9 @@
*
* Author: Fabio Estevam <fabio.estevam@freescale.com>
*/
+
#include <dt-bindings/gpio/gpio.h>
+
/ {
aliases {
backlight = &backlight;
diff --git a/arch/arm/dts/imx6qdl-wandboard-revd1.dtsi b/arch/arm/dts/imx6qdl-wandboard-revd1.dtsi
index 93909796885a..bf86b639fdac 100644
--- a/arch/arm/dts/imx6qdl-wandboard-revd1.dtsi
+++ b/arch/arm/dts/imx6qdl-wandboard-revd1.dtsi
@@ -142,7 +142,6 @@
imx6qdl-wandboard {
pinctrl_hog: hoggrp {
fsl,pins = <
- MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x80000000 /* USB Power Enable */
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USDHC1 CD */
MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 /* uSDHC3 CD */
MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1f0b1 /* RGMII PHY reset */
@@ -166,7 +165,6 @@
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
- MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
>;
};
diff --git a/arch/arm/dts/imx6qdl-wandboard.dtsi b/arch/arm/dts/imx6qdl-wandboard.dtsi
index 35a88bf5a765..ec6fba5ee8fd 100644
--- a/arch/arm/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/dts/imx6qdl-wandboard.dtsi
@@ -8,10 +8,6 @@
#include <dt-bindings/gpio/gpio.h>
/ {
- aliases {
- mmc0 = &usdhc3;
- };
-
chosen {
stdout-path = &uart1;
};
@@ -37,6 +33,30 @@
spdif-out;
};
+ reg_1p5v: regulator-1p5v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P5V";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_2p8v: regulator-2p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "2P8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
reg_2p5v: regulator-2p5v {
compatible = "regulator-fixed";
regulator-name = "2P5V";
@@ -77,15 +97,21 @@
&i2c1 {
clock-frequency = <100000>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
};
&i2c2 {
clock-frequency = <100000>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
codec: sgtl5000@a {
@@ -98,6 +124,29 @@
VDDIO-supply = <®_3p3v>;
lrclk-strength = <3>;
};
+
+ camera@3c {
+ compatible = "ovti,ov5645";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ov5645>;
+ reg = <0x3c>;
+ clocks = <&clks IMX6QDL_CLK_CKO2>;
+ clock-names = "xclk";
+ clock-frequency = <24000000>;
+ vdddo-supply = <®_1p8v>;
+ vdda-supply = <®_2p8v>;
+ vddd-supply = <®_1p5v>;
+ enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+
+ port {
+ ov5645_to_mipi_csi2: endpoint {
+ remote-endpoint = <&mipi_csi2_in>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
};
&iomuxc {
@@ -132,7 +181,6 @@
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
- MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
>;
};
@@ -143,6 +191,13 @@
>;
};
+ pinctrl_i2c1_gpio: i2c1gpiogrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b0
+ MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b0
+ >;
+ };
+
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
@@ -150,12 +205,27 @@
>;
};
+ pinctrl_i2c2_gpio: i2c2gpiogrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b0
+ MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b0
+ >;
+ };
+
pinctrl_mclk: mclkgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
>;
};
+ pinctrl_ov5645: ov5645grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__CCM_CLKO2 0x000b0
+ MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0
+ MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0
+ >;
+ };
+
pinctrl_spdif: spdifgrp {
fsl,pins = <
MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1b0b0
@@ -231,9 +301,6 @@
phy-mode = "rgmii-id";
phy-handle = <ðphy>;
phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
- interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
- <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
- fsl,err006687-workaround-present;
status = "okay";
mdio {
@@ -242,6 +309,21 @@
ethphy: ethernet-phy@1 {
reg = <1>;
+ qca,clk-out-frequency = <125000000>;
+ };
+ };
+};
+
+&mipi_csi {
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ mipi_csi2_in: endpoint {
+ remote-endpoint = <&ov5645_to_mipi_csi2>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
};
};
};
diff --git a/arch/arm/dts/imx6qdl.dtsi b/arch/arm/dts/imx6qdl.dtsi
index d89272039b28..3693bc11016b 100644
--- a/arch/arm/dts/imx6qdl.dtsi
+++ b/arch/arm/dts/imx6qdl.dtsi
@@ -4,6 +4,7 @@
// Copyright 2011 Linaro Ltd.
#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
@@ -13,10 +14,8 @@
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
- * Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; };
aliases {
ethernet0 = &fec;
@@ -46,39 +45,34 @@
spi1 = &ecspi2;
spi2 = &ecspi3;
spi3 = &ecspi4;
+ usb0 = &usbotg;
+ usb1 = &usbh1;
+ usb2 = &usbh2;
+ usb3 = &usbh3;
usbphy0 = &usbphy1;
usbphy1 = &usbphy2;
};
clocks {
ckil {
- compatible = "fsl,imx-ckil", "fixed-clock";
+ compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
ckih1 {
- compatible = "fsl,imx-ckih1", "fixed-clock";
+ compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
osc {
- compatible = "fsl,imx-osc", "fixed-clock";
+ compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
};
};
- tempmon: tempmon {
- compatible = "fsl,imx6q-tempmon";
- interrupt-parent = <&gpc>;
- interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
- fsl,tempmon = <&anatop>;
- fsl,tempmon-data = <&ocotp>;
- clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
- };
-
ldb: ldb {
#address-cells = <1>;
#size-cells = <0>;
@@ -139,6 +133,16 @@
interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
};
+ usbphynop1: usbphynop1 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+
+ usbphynop2: usbphynop2 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -159,10 +163,8 @@
clocks = <&clks IMX6QDL_CLK_APBH_DMA>;
};
- gpmi: gpmi-nand@112000 {
+ gpmi: nand-controller@112000 {
compatible = "fsl,imx6q-gpmi-nand";
- #address-cells = <1>;
- #size-cells = <1>;
reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
reg-names = "gpmi-nand", "bch";
interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
@@ -180,8 +182,6 @@
};
hdmi: hdmi@120000 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0x00120000 0x9000>;
interrupts = <0 115 0x04>;
gpr = <&gpr>;
@@ -190,19 +190,24 @@
clock-names = "iahb", "isfr";
status = "disabled";
- port@0 {
- reg = <0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
- hdmi_mux_0: endpoint {
- remote-endpoint = <&ipu1_di0_hdmi>;
+ hdmi_mux_0: endpoint {
+ remote-endpoint = <&ipu1_di0_hdmi>;
+ };
};
- };
- port@1 {
- reg = <1>;
+ port@1 {
+ reg = <1>;
- hdmi_mux_1: endpoint {
- remote-endpoint = <&ipu1_di1_hdmi>;
+ hdmi_mux_1: endpoint {
+ remote-endpoint = <&ipu1_di1_hdmi>;
+ };
};
};
};
@@ -216,6 +221,7 @@
<&clks IMX6QDL_CLK_GPU3D_SHADER>;
clock-names = "bus", "core", "shader";
power-domains = <&pd_pu>;
+ #cooling-cells = <2>;
};
gpu_2d: gpu@134000 {
@@ -226,6 +232,7 @@
<&clks IMX6QDL_CLK_GPU2D_CORE>;
clock-names = "bus", "core";
power-domains = <&pd_pu>;
+ #cooling-cells = <2>;
};
timer@a00600 {
@@ -245,7 +252,7 @@
interrupt-parent = <&intc>;
};
- L2: l2-cache@a02000 {
+ L2: cache-controller@a02000 {
compatible = "arm,pl310-cache";
reg = <0x00a02000 0x1000>;
interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -257,7 +264,7 @@
};
pcie: pcie@1ffc000 {
- compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
+ compatible = "fsl,imx6q-pcie";
reg = <0x01ffc000 0x04000>,
<0x01f00000 0x80000>;
reg-names = "dbi", "config";
@@ -265,8 +272,8 @@
#size-cells = <2>;
device_type = "pci";
bus-range = <0x00 0xff>;
- ranges = <0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */
- 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
+ ranges = <0x81000000 0 0 0x01f80000 0 0x00010000>, /* downstream I/O */
+ <0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
num-lanes = <1>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
@@ -326,7 +333,7 @@
clocks = <&clks IMX6QDL_CLK_ECSPI1>,
<&clks IMX6QDL_CLK_ECSPI1>;
clock-names = "ipg", "per";
- dmas = <&sdma 3 8 1>, <&sdma 4 8 2>;
+ dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
dma-names = "rx", "tx";
status = "disabled";
};
@@ -340,7 +347,7 @@
clocks = <&clks IMX6QDL_CLK_ECSPI2>,
<&clks IMX6QDL_CLK_ECSPI2>;
clock-names = "ipg", "per";
- dmas = <&sdma 5 8 1>, <&sdma 6 8 2>;
+ dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
dma-names = "rx", "tx";
status = "disabled";
};
@@ -354,7 +361,7 @@
clocks = <&clks IMX6QDL_CLK_ECSPI3>,
<&clks IMX6QDL_CLK_ECSPI3>;
clock-names = "ipg", "per";
- dmas = <&sdma 7 8 1>, <&sdma 8 8 2>;
+ dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
dma-names = "rx", "tx";
status = "disabled";
};
@@ -368,7 +375,7 @@
clocks = <&clks IMX6QDL_CLK_ECSPI4>,
<&clks IMX6QDL_CLK_ECSPI4>;
clock-names = "ipg", "per";
- dmas = <&sdma 9 8 1>, <&sdma 10 8 2>;
+ dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
dma-names = "rx", "tx";
status = "disabled";
};
@@ -474,7 +481,7 @@
status = "okay";
};
- spba@203c000 {
+ spba-bus@203c000 {
reg = <0x0203c000 0x4000>;
};
};
@@ -498,7 +505,7 @@
};
pwm1: pwm@2080000 {
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x02080000 0x4000>;
interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
@@ -509,7 +516,7 @@
};
pwm2: pwm@2084000 {
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x02084000 0x4000>;
interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -520,7 +527,7 @@
};
pwm3: pwm@2088000 {
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x02088000 0x4000>;
interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
@@ -531,7 +538,7 @@
};
pwm4: pwm@208c000 {
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x0208c000 0x4000>;
interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
@@ -541,27 +548,29 @@
status = "disabled";
};
- can1: flexcan@2090000 {
+ can1: can@2090000 {
compatible = "fsl,imx6q-flexcan";
reg = <0x02090000 0x4000>;
interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_CAN1_IPG>,
<&clks IMX6QDL_CLK_CAN1_SERIAL>;
clock-names = "ipg", "per";
+ fsl,stop-mode = <&gpr 0x34 28>;
status = "disabled";
};
- can2: flexcan@2094000 {
+ can2: can@2094000 {
compatible = "fsl,imx6q-flexcan";
reg = <0x02094000 0x4000>;
interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_CAN2_IPG>,
<&clks IMX6QDL_CLK_CAN2_SERIAL>;
clock-names = "ipg", "per";
+ fsl,stop-mode = <&gpr 0x34 29>;
status = "disabled";
};
- gpt: gpt@2098000 {
+ gpt: timer@2098000 {
compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt";
reg = <0x02098000 0x4000>;
interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -648,7 +657,7 @@
#interrupt-cells = <2>;
};
- kpp: kpp@20b8000 {
+ kpp: keypad@20b8000 {
compatible = "fsl,imx6q-kpp", "fsl,imx21-kpp";
reg = <0x020b8000 0x4000>;
interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -656,22 +665,22 @@
status = "disabled";
};
- wdog1: wdog@20bc000 {
+ wdog1: watchdog@20bc000 {
compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6QDL_CLK_DUMMY>;
+ clocks = <&clks IMX6QDL_CLK_IPG>;
};
- wdog2: wdog@20c0000 {
+ wdog2: watchdog@20c0000 {
compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6QDL_CLK_DUMMY>;
+ clocks = <&clks IMX6QDL_CLK_IPG>;
status = "disabled";
};
- clks: ccm@20c4000 {
+ clks: clock-controller@20c4000 {
compatible = "fsl,imx6q-ccm";
reg = <0x020c4000 0x4000>;
interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
@@ -680,7 +689,7 @@
};
anatop: anatop@20c8000 {
- compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
+ compatible = "fsl,imx6q-anatop", "syscon", "simple-mfd";
reg = <0x020c8000 0x1000>;
interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
<0 54 IRQ_TYPE_LEVEL_HIGH>,
@@ -781,6 +790,17 @@
anatop-min-voltage = <725000>;
anatop-max-voltage = <1450000>;
};
+
+ tempmon: tempmon {
+ compatible = "fsl,imx6q-tempmon";
+ interrupt-parent = <&gpc>;
+ interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,tempmon = <&anatop>;
+ nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+ nvmem-cell-names = "calib", "temp_grade";
+ clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+ #thermal-sensor-cells = <0>;
+ };
};
usbphy1: usbphy@20c9000 {
@@ -820,6 +840,15 @@
status = "disabled";
};
+ snvs_pwrkey: snvs-powerkey {
+ compatible = "fsl,sec-v4.0-pwrkey";
+ regmap = <&snvs>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ linux,keycode = <KEY_POWER>;
+ wakeup-source;
+ status = "disabled";
+ };
+
snvs_lpgpr: snvs-lpgpr {
compatible = "fsl,imx6q-snvs-lpgpr";
};
@@ -835,7 +864,7 @@
interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
};
- src: src@20d8000 {
+ src: reset-controller@20d8000 {
compatible = "fsl,imx6q-src", "fsl,imx51-src";
reg = <0x020d8000 0x4000>;
interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
@@ -848,8 +877,7 @@
reg = <0x020dc000 0x4000>;
interrupt-controller;
#interrupt-cells = <3>;
- interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
- <0 90 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&intc>;
clocks = <&clks IMX6QDL_CLK_IPG>;
clock-names = "ipg";
@@ -886,7 +914,7 @@
};
};
- iomuxc: iomuxc@20e0000 {
+ iomuxc: pinctrl@20e0000 {
compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc";
reg = <0x20e0000 0x4000>;
};
@@ -905,7 +933,7 @@
compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6QDL_CLK_SDMA>,
+ clocks = <&clks IMX6QDL_CLK_IPG>,
<&clks IMX6QDL_CLK_SDMA>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
@@ -920,7 +948,7 @@
reg = <0x02100000 0x100000>;
ranges;
- crypto: caam@2100000 {
+ crypto: crypto@2100000 {
compatible = "fsl,sec-v4.0";
#address-cells = <1>;
#size-cells = <1>;
@@ -932,13 +960,13 @@
<&clks IMX6QDL_CLK_EIM_SLOW>;
clock-names = "mem", "aclk", "ipg", "emi_slow";
- sec_jr0: jr0@1000 {
+ sec_jr0: jr@1000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x1000 0x1000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
};
- sec_jr1: jr1@2000 {
+ sec_jr1: jr@2000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x2000 0x1000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
@@ -981,6 +1009,8 @@
reg = <0x02184400 0x200>;
interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_USBOH3>;
+ fsl,usbphy = <&usbphynop1>;
+ phy_type = "hsic";
fsl,usbmisc = <&usbmisc 2>;
dr_mode = "host";
ahb-burst-config = <0x0>;
@@ -994,6 +1024,8 @@
reg = <0x02184600 0x200>;
interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_USBOH3>;
+ fsl,usbphy = <&usbphynop2>;
+ phy_type = "hsic";
fsl,usbmisc = <&usbmisc 3>;
dr_mode = "host";
ahb-burst-config = <0x0>;
@@ -1013,13 +1045,14 @@
compatible = "fsl,imx6q-fec";
reg = <0x02188000 0x4000>;
interrupt-names = "int0", "pps";
- interrupts-extended =
- <&intc 0 118 IRQ_TYPE_LEVEL_HIGH>,
- <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>,
+ <0 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_ENET>,
<&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET_REF>,
<&clks IMX6QDL_CLK_ENET_REF>;
- clock-names = "ipg", "ahb", "ptp";
+ clock-names = "ipg", "ahb", "ptp", "enet_out";
+ fsl,stop-mode = <&gpr 0x34 27>;
status = "disabled";
};
@@ -1030,7 +1063,7 @@
<0 126 IRQ_TYPE_LEVEL_HIGH>;
};
- usdhc1: usdhc@2190000 {
+ usdhc1: mmc@2190000 {
compatible = "fsl,imx6q-usdhc";
reg = <0x02190000 0x4000>;
interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -1042,7 +1075,7 @@
status = "disabled";
};
- usdhc2: usdhc@2194000 {
+ usdhc2: mmc@2194000 {
compatible = "fsl,imx6q-usdhc";
reg = <0x02194000 0x4000>;
interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -1054,7 +1087,7 @@
status = "disabled";
};
- usdhc3: usdhc@2198000 {
+ usdhc3: mmc@2198000 {
compatible = "fsl,imx6q-usdhc";
reg = <0x02198000 0x4000>;
interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
@@ -1066,7 +1099,7 @@
status = "disabled";
};
- usdhc4: usdhc@219c000 {
+ usdhc4: mmc@219c000 {
compatible = "fsl,imx6q-usdhc";
reg = <0x0219c000 0x4000>;
interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -1112,13 +1145,16 @@
reg = <0x021ac000 0x4000>;
};
- mmdc0: mmdc@21b0000 { /* MMDC0 */
+ mmdc0: memory-controller@21b0000 { /* MMDC0 */
compatible = "fsl,imx6q-mmdc";
reg = <0x021b0000 0x4000>;
+ clocks = <&clks IMX6QDL_CLK_MMDC_P0_IPG>;
};
- mmdc1: mmdc@21b4000 { /* MMDC1 */
+ mmdc1: memory-controller@21b4000 { /* MMDC1 */
+ compatible = "fsl,imx6q-mmdc";
reg = <0x021b4000 0x4000>;
+ status = "disabled";
};
weim: weim@21b8000 {
@@ -1132,10 +1168,24 @@
status = "disabled";
};
- ocotp: ocotp@21bc000 {
+ ocotp: efuse@21bc000 {
compatible = "fsl,imx6q-ocotp", "syscon";
reg = <0x021bc000 0x4000>;
clocks = <&clks IMX6QDL_CLK_IIM>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpu_speed_grade: speed-grade@10 {
+ reg = <0x10 4>;
+ };
+
+ tempmon_calib: calib@38 {
+ reg = <0x38 4>;
+ };
+
+ tempmon_temp_grade: temp-grade@20 {
+ reg = <0x20 4>;
+ };
};
tzasc@21d0000 { /* TZASC1 */
diff --git a/arch/arm/dts/imx6qp-sabreauto.dts b/arch/arm/dts/imx6qp-sabreauto.dts
index d4caeeb0af70..2bb3bfb18ec3 100644
--- a/arch/arm/dts/imx6qp-sabreauto.dts
+++ b/arch/arm/dts/imx6qp-sabreauto.dts
@@ -47,7 +47,12 @@
};
&pcie {
- status = "disabled";
+ reset-gpio = <&max7310_c 5 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
};
&vgen3_reg {
diff --git a/arch/arm/dts/imx6qp-sabresd.dts b/arch/arm/dts/imx6qp-sabresd.dts
index f1b9cb104fdd..f69eec18d865 100644
--- a/arch/arm/dts/imx6qp-sabresd.dts
+++ b/arch/arm/dts/imx6qp-sabresd.dts
@@ -50,6 +50,14 @@
};
};
+&vgen3_reg {
+ regulator-always-on;
+};
+
&pcie {
- status = "disabled";
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
};
diff --git a/arch/arm/dts/imx6qp.dtsi b/arch/arm/dts/imx6qp.dtsi
index 93b89dc1f53b..050365513836 100644
--- a/arch/arm/dts/imx6qp.dtsi
+++ b/arch/arm/dts/imx6qp.dtsi
@@ -77,7 +77,6 @@
};
&fec {
- /delete-property/interrupts-extended;
interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>,
<0 119 IRQ_TYPE_LEVEL_HIGH>;
};
@@ -111,5 +110,5 @@
};
&pcie {
- compatible = "fsl,imx6qp-pcie", "snps,dw-pcie";
+ compatible = "fsl,imx6qp-pcie";
};
diff --git a/arch/arm/dts/imx6sl-evk.dts b/arch/arm/dts/imx6sl-evk.dts
index 0a90eea17018..f16c830f1e91 100644
--- a/arch/arm/dts/imx6sl-evk.dts
+++ b/arch/arm/dts/imx6sl-evk.dts
@@ -1,10 +1,6 @@
-/*
- * Copyright (C) 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+//Copyright (C) 2013 Freescale Semiconductor, Inc.
/dts-v1/;
@@ -16,11 +12,16 @@
model = "Freescale i.MX6 SoloLite EVK Board";
compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
- memory {
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x40000000>;
};
- backlight {
+ backlight_display: backlight_display {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -39,62 +40,62 @@
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_usb_otg1_vbus: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "usb_otg1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio4 0 0>;
- enable-active-high;
- vin-supply = <&swbst_reg>;
- };
+ reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&swbst_reg>;
+ };
- reg_usb_otg2_vbus: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "usb_otg2_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio4 2 0>;
- enable-active-high;
- vin-supply = <&swbst_reg>;
- };
+ reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&swbst_reg>;
+ };
- reg_aud3v: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "wm8962-supply-3v15";
- regulator-min-microvolt = <3150000>;
- regulator-max-microvolt = <3150000>;
- regulator-boot-on;
- };
+ reg_aud3v: regulator-aud3v {
+ compatible = "regulator-fixed";
+ regulator-name = "wm8962-supply-3v15";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-boot-on;
+ };
- reg_aud4v: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "wm8962-supply-4v2";
- regulator-min-microvolt = <4325000>;
- regulator-max-microvolt = <4325000>;
- regulator-boot-on;
- };
+ reg_aud4v: regulator-aud4v {
+ compatible = "regulator-fixed";
+ regulator-name = "wm8962-supply-4v2";
+ regulator-min-microvolt = <4325000>;
+ regulator-max-microvolt = <4325000>;
+ regulator-boot-on;
+ };
- reg_lcd_3v3: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "lcd-3v3";
- gpio = <&gpio4 3 0>;
- enable-active-high;
- };
+ reg_lcd_3v3: regulator-lcd-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
+ regulator-name = "lcd-3v3";
+ gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_lcd_5v: regulator-lcd-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
};
sound {
compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hp>;
model = "wm8962-audio";
ssi-controller = <&ssi2>;
audio-codec = <&codec>;
@@ -107,6 +108,20 @@
"IN3R", "AMIC";
mux-int-port = <2>;
mux-ext-port = <3>;
+ hp-det-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
+ };
+
+ panel {
+ compatible = "sii,43wvf1g";
+ backlight = <&backlight_display>;
+ dvdd-supply = <®_lcd_3v3>;
+ avdd-supply = <®_lcd_5v>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
};
};
@@ -117,12 +132,12 @@
};
&ecspi1 {
- cs-gpios = <&gpio4 11 0>;
+ cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p32", "jedec,spi-nor";
@@ -145,7 +160,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- pmic: pfuze100@08 {
+ pmic: pfuze100@8 {
compatible = "fsl,pfuze100";
reg = <0x08>;
@@ -190,6 +205,7 @@
sw4_reg: sw4 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
swbst_reg: swbst {
@@ -330,6 +346,12 @@
>;
};
+ pinctrl_hp: hpgrp {
+ fsl,pins = <
+ MX6SL_PAD_FEC_RX_ER__GPIO4_IO19 0x1b0b0
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1
@@ -401,6 +423,12 @@
>;
};
+ pinctrl_reg_lcd_3v3: reglcd3v3grp {
+ fsl,pins = <
+ MX6SL_PAD_KEY_ROW5__GPIO4_IO03 0x17059
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
@@ -546,41 +574,30 @@
&lcdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd>;
- lcd-supply = <®_lcd_3v3>;
- display = <&display0>;
status = "okay";
- display0: display0 {
- bits-per-pixel = <32>;
- bus-width = <24>;
-
- display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
- clock-frequency = <33500000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <89>;
- hfront-porch = <164>;
- vback-porch = <23>;
- vfront-porch = <10>;
- hsync-len = <10>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
};
};
};
&pwm1 {
+ #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
};
+®_vdd1p1 {
+ vin-supply = <&sw2_reg>;
+};
+
+®_vdd2p5 {
+ vin-supply = <&sw2_reg>;
+};
+
&snvs_poweroff {
status = "okay";
};
diff --git a/arch/arm/dts/imx6sl.dtsi b/arch/arm/dts/imx6sl.dtsi
index 37e341c6c352..c7d907c5c352 100644
--- a/arch/arm/dts/imx6sl.dtsi
+++ b/arch/arm/dts/imx6sl.dtsi
@@ -1,11 +1,6 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
#include <dt-bindings/interrupt-controller/irq.h>
#include "imx6sl-pinfunc.h"
@@ -18,10 +13,8 @@
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
- * Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; reg = <0 0>; };
aliases {
ethernet0 = &fec;
@@ -30,6 +23,13 @@
gpio2 = &gpio3;
gpio3 = &gpio4;
gpio4 = &gpio5;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ mmc2 = &usdhc3;
+ mmc3 = &usdhc4;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
@@ -39,6 +39,9 @@
spi1 = &ecspi2;
spi2 = &ecspi3;
spi3 = &ecspi4;
+ usb0 = &usbotg1;
+ usb1 = &usbotg2;
+ usb2 = &usbh;
usbphy0 = &usbphy1;
usbphy1 = &usbphy2;
};
@@ -52,19 +55,18 @@
device_type = "cpu";
reg = <0x0>;
next-level-cache = <&L2>;
- operating-points = <
+ operating-points =
/* kHz uV */
- 996000 1275000
- 792000 1175000
- 396000 975000
- >;
- fsl,soc-operating-points = <
+ <996000 1275000>,
+ <792000 1175000>,
+ <396000 975000>;
+ fsl,soc-operating-points =
/* ARM kHz SOC-PU uV */
- 996000 1225000
- 792000 1175000
- 396000 1175000
- >;
+ <996000 1225000>,
+ <792000 1175000>,
+ <396000 1175000>;
clock-latency = <61036>; /* two CLK32 periods */
+ #cooling-cells = <2>;
clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>,
<&clks IMX6SL_CLK_STEP>, <&clks IMX6SL_CLK_PLL1_SW>,
<&clks IMX6SL_CLK_PLL1_SYS>;
@@ -73,22 +75,12 @@
arm-supply = <®_arm>;
pu-supply = <®_pu>;
soc-supply = <®_soc>;
+ nvmem-cells = <&cpu_speed_grade>;
+ nvmem-cell-names = "speed_grade";
};
};
- intc: interrupt-controller@00a01000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x00a01000 0x1000>,
- <0x00a00100 0x100>;
- interrupt-parent = <&intc>;
- };
-
clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
ckil {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -102,6 +94,17 @@
};
};
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupt-parent = <&gpc>;
+ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ usbphynop1: usbphynop1 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -109,13 +112,22 @@
interrupt-parent = <&gpc>;
ranges;
- ocram: sram@00900000 {
+ ocram: sram@900000 {
compatible = "mmio-sram";
reg = <0x00900000 0x20000>;
clocks = <&clks IMX6SL_CLK_OCRAM>;
};
- L2: l2-cache@00a02000 {
+ intc: interrupt-controller@a01000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x00a01000 0x1000>,
+ <0x00a00100 0x100>;
+ interrupt-parent = <&intc>;
+ };
+
+ L2: cache-controller@a02000 {
compatible = "arm,pl310-cache";
reg = <0x00a02000 0x1000>;
interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -125,26 +137,21 @@
arm,data-latency = <4 2 3>;
};
- pmu {
- compatible = "arm,cortex-a9-pmu";
- interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- aips1: bus@02000000 {
+ aips1: bus@2000000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x100000>;
ranges;
- spba: spba-bus@02000000 {
+ spba: spba-bus@2000000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x40000>;
ranges;
- spdif: spdif@02004000 {
+ spdif: spdif@2004000 {
compatible = "fsl,imx6sl-spdif",
"fsl,imx35-spdif";
reg = <0x02004000 0x4000>;
@@ -165,7 +172,7 @@
status = "disabled";
};
- ecspi1: ecspi@02008000 {
+ ecspi1: spi@2008000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
@@ -177,7 +184,7 @@
status = "disabled";
};
- ecspi2: ecspi@0200c000 {
+ ecspi2: spi@200c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
@@ -189,7 +196,7 @@
status = "disabled";
};
- ecspi3: ecspi@02010000 {
+ ecspi3: spi@2010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
@@ -201,7 +208,7 @@
status = "disabled";
};
- ecspi4: ecspi@02014000 {
+ ecspi4: spi@2014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
@@ -213,7 +220,7 @@
status = "disabled";
};
- uart5: serial@02018000 {
+ uart5: serial@2018000 {
compatible = "fsl,imx6sl-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02018000 0x4000>;
@@ -226,7 +233,7 @@
status = "disabled";
};
- uart1: serial@02020000 {
+ uart1: serial@2020000 {
compatible = "fsl,imx6sl-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
@@ -239,7 +246,7 @@
status = "disabled";
};
- uart2: serial@02024000 {
+ uart2: serial@2024000 {
compatible = "fsl,imx6sl-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02024000 0x4000>;
@@ -252,7 +259,7 @@
status = "disabled";
};
- ssi1: ssi@02028000 {
+ ssi1: ssi@2028000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx6sl-ssi",
"fsl,imx51-ssi";
@@ -268,7 +275,7 @@
status = "disabled";
};
- ssi2: ssi@0202c000 {
+ ssi2: ssi@202c000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx6sl-ssi",
"fsl,imx51-ssi";
@@ -284,7 +291,7 @@
status = "disabled";
};
- ssi3: ssi@02030000 {
+ ssi3: ssi@2030000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx6sl-ssi",
"fsl,imx51-ssi";
@@ -300,7 +307,7 @@
status = "disabled";
};
- uart3: serial@02034000 {
+ uart3: serial@2034000 {
compatible = "fsl,imx6sl-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02034000 0x4000>;
@@ -313,7 +320,7 @@
status = "disabled";
};
- uart4: serial@02038000 {
+ uart4: serial@2038000 {
compatible = "fsl,imx6sl-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02038000 0x4000>;
@@ -327,47 +334,47 @@
};
};
- pwm1: pwm@02080000 {
- #pwm-cells = <2>;
+ pwm1: pwm@2080000 {
+ #pwm-cells = <3>;
compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
reg = <0x02080000 0x4000>;
interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SL_CLK_PWM1>,
+ clocks = <&clks IMX6SL_CLK_PERCLK>,
<&clks IMX6SL_CLK_PWM1>;
clock-names = "ipg", "per";
};
- pwm2: pwm@02084000 {
- #pwm-cells = <2>;
+ pwm2: pwm@2084000 {
+ #pwm-cells = <3>;
compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
reg = <0x02084000 0x4000>;
interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SL_CLK_PWM2>,
+ clocks = <&clks IMX6SL_CLK_PERCLK>,
<&clks IMX6SL_CLK_PWM2>;
clock-names = "ipg", "per";
};
- pwm3: pwm@02088000 {
- #pwm-cells = <2>;
+ pwm3: pwm@2088000 {
+ #pwm-cells = <3>;
compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
reg = <0x02088000 0x4000>;
interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SL_CLK_PWM3>,
+ clocks = <&clks IMX6SL_CLK_PERCLK>,
<&clks IMX6SL_CLK_PWM3>;
clock-names = "ipg", "per";
};
- pwm4: pwm@0208c000 {
- #pwm-cells = <2>;
+ pwm4: pwm@208c000 {
+ #pwm-cells = <3>;
compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
reg = <0x0208c000 0x4000>;
interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SL_CLK_PWM4>,
+ clocks = <&clks IMX6SL_CLK_PERCLK>,
<&clks IMX6SL_CLK_PWM4>;
clock-names = "ipg", "per";
};
- gpt: gpt@02098000 {
+ gpt: timer@2098000 {
compatible = "fsl,imx6sl-gpt";
reg = <0x02098000 0x4000>;
interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -376,7 +383,7 @@
clock-names = "ipg", "per";
};
- gpio1: gpio@0209c000 {
+ gpio1: gpio@209c000 {
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
reg = <0x0209c000 0x4000>;
interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
@@ -393,7 +400,7 @@
<&iomuxc 27 64 4>, <&iomuxc 31 52 1>;
};
- gpio2: gpio@020a0000 {
+ gpio2: gpio@20a0000 {
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
reg = <0x020a0000 0x4000>;
interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
@@ -411,7 +418,7 @@
<&iomuxc 23 125 7>, <&iomuxc 30 110 2>;
};
- gpio3: gpio@020a4000 {
+ gpio3: gpio@20a4000 {
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
reg = <0x020a4000 0x4000>;
interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
@@ -430,7 +437,7 @@
<&iomuxc 31 102 1>;
};
- gpio4: gpio@020a8000 {
+ gpio4: gpio@20a8000 {
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
reg = <0x020a8000 0x4000>;
interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
@@ -456,7 +463,7 @@
<&iomuxc 30 152 1>, <&iomuxc 31 156 1>;
};
- gpio5: gpio@020ac000 {
+ gpio5: gpio@20ac000 {
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
reg = <0x020ac000 0x4000>;
interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
@@ -478,30 +485,30 @@
<&iomuxc 21 161 1>;
};
- kpp: kpp@020b8000 {
+ kpp: keypad@20b8000 {
compatible = "fsl,imx6sl-kpp", "fsl,imx21-kpp";
reg = <0x020b8000 0x4000>;
interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SL_CLK_DUMMY>;
+ clocks = <&clks IMX6SL_CLK_IPG>;
status = "disabled";
};
- wdog1: wdog@020bc000 {
+ wdog1: watchdog@20bc000 {
compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SL_CLK_DUMMY>;
+ clocks = <&clks IMX6SL_CLK_IPG>;
};
- wdog2: wdog@020c0000 {
+ wdog2: watchdog@20c0000 {
compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SL_CLK_DUMMY>;
+ clocks = <&clks IMX6SL_CLK_IPG>;
status = "disabled";
};
- clks: ccm@020c4000 {
+ clks: clock-controller@20c4000 {
compatible = "fsl,imx6sl-ccm";
reg = <0x020c4000 0x4000>;
interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
@@ -509,20 +516,20 @@
#clock-cells = <1>;
};
- anatop: anatop@020c8000 {
+ anatop: anatop@20c8000 {
compatible = "fsl,imx6sl-anatop",
"fsl,imx6q-anatop",
- "syscon", "simple-bus";
+ "syscon", "simple-mfd";
reg = <0x020c8000 0x1000>;
interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
<0 54 IRQ_TYPE_LEVEL_HIGH>,
<0 127 IRQ_TYPE_LEVEL_HIGH>;
- regulator-1p1 {
+ reg_vdd1p1: regulator-1p1 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p1";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1375000>;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1200000>;
regulator-always-on;
anatop-reg-offset = <0x110>;
anatop-vol-bit-shift = <8>;
@@ -530,9 +537,10 @@
anatop-min-bit-val = <4>;
anatop-min-voltage = <800000>;
anatop-max-voltage = <1375000>;
+ anatop-enable-bit = <0>;
};
- regulator-3p0 {
+ reg_vdd3p0: regulator-3p0 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2800000>;
@@ -544,13 +552,14 @@
anatop-min-bit-val = <0>;
anatop-min-voltage = <2625000>;
anatop-max-voltage = <3400000>;
+ anatop-enable-bit = <0>;
};
- regulator-2p5 {
+ reg_vdd2p5: regulator-2p5 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd2p5";
- regulator-min-microvolt = <2100000>;
- regulator-max-microvolt = <2850000>;
+ regulator-min-microvolt = <2250000>;
+ regulator-max-microvolt = <2750000>;
regulator-always-on;
anatop-reg-offset = <0x130>;
anatop-vol-bit-shift = <8>;
@@ -558,6 +567,7 @@
anatop-min-bit-val = <0>;
anatop-min-voltage = <2100000>;
anatop-max-voltage = <2850000>;
+ anatop-enable-bit = <0>;
};
reg_arm: regulator-vddcore {
@@ -582,7 +592,6 @@
regulator-name = "vddpu";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1450000>;
- regulator-always-on;
anatop-reg-offset = <0x140>;
anatop-vol-bit-shift = <9>;
anatop-vol-bit-width = <5>;
@@ -610,17 +619,19 @@
anatop-min-voltage = <725000>;
anatop-max-voltage = <1450000>;
};
- };
- tempmon: tempmon {
- compatible = "fsl,imx6q-tempmon";
- interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
- fsl,tempmon = <&anatop>;
- fsl,tempmon-data = <&ocotp>;
- clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>;
+ tempmon: tempmon {
+ compatible = "fsl,imx6q-tempmon";
+ interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gpc>;
+ fsl,tempmon = <&anatop>;
+ nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+ nvmem-cell-names = "calib", "temp_grade";
+ clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>;
+ };
};
- usbphy1: usbphy@020c9000 {
+ usbphy1: usbphy@20c9000 {
compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
reg = <0x020c9000 0x1000>;
interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
@@ -628,7 +639,7 @@
fsl,anatop = <&anatop>;
};
- usbphy2: usbphy@020ca000 {
+ usbphy2: usbphy@20ca000 {
compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
reg = <0x020ca000 0x1000>;
interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
@@ -636,7 +647,7 @@
fsl,anatop = <&anatop>;
};
- snvs: snvs@020cc000 {
+ snvs: snvs@20cc000 {
compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
reg = <0x020cc000 0x4000>;
@@ -652,22 +663,23 @@
compatible = "syscon-poweroff";
regmap = <&snvs>;
offset = <0x38>;
+ value = <0x60>;
mask = <0x60>;
status = "disabled";
};
};
- epit1: epit@020d0000 {
+ epit1: epit@20d0000 {
reg = <0x020d0000 0x4000>;
interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
};
- epit2: epit@020d4000 {
+ epit2: epit@20d4000 {
reg = <0x020d4000 0x4000>;
interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
};
- src: src@020d8000 {
+ src: reset-controller@20d8000 {
compatible = "fsl,imx6sl-src", "fsl,imx51-src";
reg = <0x020d8000 0x4000>;
interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
@@ -675,63 +687,89 @@
#reset-cells = <1>;
};
- gpc: gpc@020dc000 {
+ gpc: gpc@20dc000 {
compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc";
reg = <0x020dc000 0x4000>;
interrupt-controller;
#interrupt-cells = <3>;
interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&intc>;
- pu-supply = <®_pu>;
- clocks = <&clks IMX6SL_CLK_GPU2D_OVG>,
- <&clks IMX6SL_CLK_GPU2D_PODF>;
- #power-domain-cells = <1>;
+ clocks = <&clks IMX6SL_CLK_IPG>;
+ clock-names = "ipg";
+
+ pgc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-domain@0 {
+ reg = <0>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_pu: power-domain@1 {
+ reg = <1>;
+ #power-domain-cells = <0>;
+ power-supply = <®_pu>;
+ clocks = <&clks IMX6SL_CLK_GPU2D_OVG>,
+ <&clks IMX6SL_CLK_GPU2D_PODF>;
+ };
+
+ pd_disp: power-domain@2 {
+ reg = <2>;
+ #power-domain-cells = <0>;
+ clocks = <&clks IMX6SL_CLK_LCDIF_AXI>,
+ <&clks IMX6SL_CLK_LCDIF_PIX>,
+ <&clks IMX6SL_CLK_EPDC_AXI>,
+ <&clks IMX6SL_CLK_EPDC_PIX>,
+ <&clks IMX6SL_CLK_PXP_AXI>;
+ };
+ };
};
- gpr: iomuxc-gpr@020e0000 {
+ gpr: iomuxc-gpr@20e0000 {
compatible = "fsl,imx6sl-iomuxc-gpr",
"fsl,imx6q-iomuxc-gpr", "syscon";
reg = <0x020e0000 0x38>;
};
- iomuxc: iomuxc@020e0000 {
+ iomuxc: pinctrl@20e0000 {
compatible = "fsl,imx6sl-iomuxc";
reg = <0x020e0000 0x4000>;
};
- csi: csi@020e4000 {
+ csi: csi@20e4000 {
reg = <0x020e4000 0x4000>;
interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
};
- spdc: spdc@020e8000 {
+ spdc: spdc@20e8000 {
reg = <0x020e8000 0x4000>;
interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
};
- sdma: sdma@020ec000 {
+ sdma: sdma@20ec000 {
compatible = "fsl,imx6sl-sdma", "fsl,imx6q-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_SDMA>,
- <&clks IMX6SL_CLK_SDMA>;
+ <&clks IMX6SL_CLK_AHB>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
/* imx6sl reuses imx6q sdma firmware */
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
};
- pxp: pxp@020f0000 {
+ pxp: pxp@20f0000 {
reg = <0x020f0000 0x4000>;
interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
};
- epdc: epdc@020f4000 {
+ epdc: epdc@20f4000 {
reg = <0x020f4000 0x4000>;
interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
};
- lcdif: lcdif@020f8000 {
+ lcdif: lcdif@20f8000 {
compatible = "fsl,imx6sl-lcdif", "fsl,imx28-lcdif";
reg = <0x020f8000 0x4000>;
interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
@@ -740,9 +778,10 @@
<&clks IMX6SL_CLK_DUMMY>;
clock-names = "pix", "axi", "disp_axi";
status = "disabled";
+ power-domains = <&pd_disp>;
};
- dcp: dcp@020fc000 {
+ dcp: crypto@20fc000 {
compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp";
reg = <0x020fc000 0x4000>;
interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>,
@@ -751,14 +790,14 @@
};
};
- aips2: bus@02100000 {
+ aips2: bus@2100000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02100000 0x100000>;
ranges;
- usbotg1: usb@02184000 {
+ usbotg1: usb@2184000 {
compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
reg = <0x02184000 0x200>;
interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
@@ -771,7 +810,7 @@
status = "disabled";
};
- usbotg2: usb@02184200 {
+ usbotg2: usb@2184200 {
compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
reg = <0x02184200 0x200>;
interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
@@ -784,11 +823,13 @@
status = "disabled";
};
- usbh: usb@02184400 {
+ usbh: usb@2184400 {
compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
reg = <0x02184400 0x200>;
interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USBOH3>;
+ fsl,usbphy = <&usbphynop1>;
+ phy_type = "hsic";
fsl,usbmisc = <&usbmisc 2>;
dr_mode = "host";
ahb-burst-config = <0x0>;
@@ -797,14 +838,14 @@
status = "disabled";
};
- usbmisc: usbmisc@02184800 {
+ usbmisc: usbmisc@2184800 {
#index-cells = <1>;
compatible = "fsl,imx6sl-usbmisc", "fsl,imx6q-usbmisc";
reg = <0x02184800 0x200>;
clocks = <&clks IMX6SL_CLK_USBOH3>;
};
- fec: ethernet@02188000 {
+ fec: ethernet@2188000 {
compatible = "fsl,imx6sl-fec", "fsl,imx25-fec";
reg = <0x02188000 0x4000>;
interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
@@ -814,7 +855,7 @@
status = "disabled";
};
- usdhc1: usdhc@02190000 {
+ usdhc1: mmc@2190000 {
compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
reg = <0x02190000 0x4000>;
interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -826,7 +867,7 @@
status = "disabled";
};
- usdhc2: usdhc@02194000 {
+ usdhc2: mmc@2194000 {
compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
reg = <0x02194000 0x4000>;
interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -838,7 +879,7 @@
status = "disabled";
};
- usdhc3: usdhc@02198000 {
+ usdhc3: mmc@2198000 {
compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
reg = <0x02198000 0x4000>;
interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
@@ -850,7 +891,7 @@
status = "disabled";
};
- usdhc4: usdhc@0219c000 {
+ usdhc4: mmc@219c000 {
compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
reg = <0x0219c000 0x4000>;
interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -862,7 +903,7 @@
status = "disabled";
};
- i2c1: i2c@021a0000 {
+ i2c1: i2c@21a0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
@@ -872,7 +913,7 @@
status = "disabled";
};
- i2c2: i2c@021a4000 {
+ i2c2: i2c@21a4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
@@ -882,7 +923,7 @@
status = "disabled";
};
- i2c3: i2c@021a8000 {
+ i2c3: i2c@21a8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
@@ -892,17 +933,20 @@
status = "disabled";
};
- mmdc: mmdc@021b0000 {
+ memory-controller@21b0000 {
compatible = "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc";
reg = <0x021b0000 0x4000>;
+ clocks = <&clks IMX6SL_CLK_MMDC_P0_IPG>;
};
- rngb: rngb@021b4000 {
+ rngb: rngb@21b4000 {
+ compatible = "fsl,imx6sl-rngb", "fsl,imx25-rngb";
reg = <0x021b4000 0x4000>;
interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_DUMMY>;
};
- weim: weim@021b8000 {
+ weim: weim@21b8000 {
#address-cells = <2>;
#size-cells = <1>;
reg = <0x021b8000 0x4000>;
@@ -911,17 +955,51 @@
status = "disabled";
};
- ocotp: ocotp@021bc000 {
+ ocotp: efuse@21bc000 {
compatible = "fsl,imx6sl-ocotp", "syscon";
reg = <0x021bc000 0x4000>;
clocks = <&clks IMX6SL_CLK_OCOTP>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpu_speed_grade: speed-grade@10 {
+ reg = <0x10 4>;
+ };
+
+ tempmon_calib: calib@38 {
+ reg = <0x38 4>;
+ };
+
+ tempmon_temp_grade: temp-grade@20 {
+ reg = <0x20 4>;
+ };
};
- audmux: audmux@021d8000 {
+ audmux: audmux@21d8000 {
compatible = "fsl,imx6sl-audmux", "fsl,imx31-audmux";
reg = <0x021d8000 0x4000>;
status = "disabled";
};
};
+
+ gpu_2d: gpu@2200000 {
+ compatible = "vivante,gc";
+ reg = <0x02200000 0x4000>;
+ interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_MMDC_ROOT>,
+ <&clks IMX6SL_CLK_GPU2D_OVG>;
+ clock-names = "bus", "core";
+ power-domains = <&pd_pu>;
+ };
+
+ gpu_vg: gpu@2204000 {
+ compatible = "vivante,gc";
+ reg = <0x02204000 0x4000>;
+ interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_MMDC_ROOT>,
+ <&clks IMX6SL_CLK_GPU2D_OVG>;
+ clock-names = "bus", "core";
+ power-domains = <&pd_pu>;
+ };
};
};
diff --git a/arch/arm/dts/imx6sll-evk.dts b/arch/arm/dts/imx6sll-evk.dts
index b4af007c983f..32b3d82fec53 100644
--- a/arch/arm/dts/imx6sll-evk.dts
+++ b/arch/arm/dts/imx6sll-evk.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
- * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
/dts-v1/;
@@ -16,11 +15,16 @@
model = "Freescale i.MX6SLL EVK Board";
compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
- memory {
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x80000000>;
};
- backlight {
+ backlight_display: backlight-display {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -28,108 +32,114 @@
status = "okay";
};
- battery: max8903@0 {
- compatible = "fsl,max8903-charger";
+ leds {
+ compatible = "gpio-leds";
pinctrl-names = "default";
- dok_input = <&gpio4 13 1>;
- uok_input = <&gpio4 13 1>;
- chg_input = <&gpio4 15 1>;
- flt_input = <&gpio4 14 1>;
- fsl,dcm_always_high;
- fsl,dc_valid;
- fsl,adc_disable;
- status = "okay";
+ pinctrl-0 = <&pinctrl_led>;
+
+ user {
+ label = "debug";
+ gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
};
- pxp_v4l2_out {
- compatible = "fsl,imx6sl-pxp-v4l2";
- status = "okay";
+ reg_usb_otg1_vbus: regulator-otg1-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1_vbus>;
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ reg_usb_otg2_vbus: regulator-otg2-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg2_vbus>;
+ regulator-name = "usb_otg2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- reg_usb_otg1_vbus: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "usb_otg1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ reg_aud3v: regulator-aud3v {
+ compatible = "regulator-fixed";
+ regulator-name = "wm8962-supply-3v15";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-boot-on;
+ };
- reg_usb_otg2_vbus: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "usb_otg2_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ reg_aud4v: regulator-aud4v {
+ compatible = "regulator-fixed";
+ regulator-name = "wm8962-supply-4v2";
+ regulator-min-microvolt = <4325000>;
+ regulator-max-microvolt = <4325000>;
+ regulator-boot-on;
+ };
- reg_aud3v: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "wm8962-supply-3v15";
- regulator-min-microvolt = <3150000>;
- regulator-max-microvolt = <3150000>;
- regulator-boot-on;
- };
+ reg_lcd_3v3: regulator-lcd-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
+ regulator-name = "lcd-3v3";
+ gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- reg_aud4v: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "wm8962-supply-4v2";
- regulator-min-microvolt = <4325000>;
- regulator-max-microvolt = <4325000>;
- regulator-boot-on;
- };
+ reg_lcd_5v: regulator-lcd-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
- reg_lcd: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "lcd-pwr";
- gpio = <&gpio4 8 0>;
- enable-active-high;
- };
+ reg_sd1_vmmc: regulator-sd1-vmmc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_sd1_vmmc>;
+ regulator-name = "SD1_SPWR";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- reg_sd1_vmmc: sd1_vmmc {
- compatible = "regulator-fixed";
- regulator-name = "SD1_SPWR";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ reg_sd3_vmmc: regulator-sd3-vmmc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_sd3_vmmc>;
+ regulator-name = "SD3_WIFI";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- reg_sd2_vmmc: sd2_vmmc {
- compatible = "regulator-fixed";
- regulator-name = "eMMC-VCCQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- };
+ panel {
+ compatible = "sii,43wvf1g";
+ backlight = <&backlight_display>;
+ dvdd-supply = <®_lcd_3v3>;
+ avdd-supply = <®_lcd_5v>;
- reg_sd3_vmmc: sd3_vmmc {
- compatible = "regulator-fixed";
- regulator-name = "SD3_WIFI";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
- enable-active-high;
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
};
-
};
sound {
compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hp>;
model = "wm8962-audio";
- cpu-dai = <&ssi2>;
- audio-codec = <&codec>;
+ audio-cpu = <&ssi2>;
+ audio-codec = <&wm8962>;
audio-routing =
"Headphone Jack", "HPOUTL",
"Headphone Jack", "HPOUTR",
@@ -139,8 +149,7 @@
"IN3R", "AMIC";
mux-int-port = <2>;
mux-ext-port = <3>;
- codec-master;
- hp-det-gpios = <&gpio4 24 1>;
+ hp-det-gpio = <&gpio4 24 GPIO_ACTIVE_LOW>;
};
};
@@ -150,11 +159,6 @@
status = "okay";
};
-&clks {
- assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>;
- assigned-clock-rates = <393216000>;
-};
-
&cpu0 {
arm-supply = <&sw1a_reg>;
soc-supply = <&sw1c_reg>;
@@ -166,7 +170,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- pmic: pfuze100@08 {
+ pfuze100: pmic@8 {
compatible = "fsl,pfuze100";
reg = <0x08>;
@@ -211,6 +215,7 @@
sw4_reg: sw4 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
swbst_reg: swbst {
@@ -265,76 +270,6 @@
};
};
};
-
- max17135: max17135@48 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_max17135>;
- compatible = "maxim,max17135";
- reg = <0x48>;
- status = "okay";
-
- vneg_pwrup = <1>;
- gvee_pwrup = <2>;
- vpos_pwrup = <10>;
- gvdd_pwrup = <12>;
- gvdd_pwrdn = <1>;
- vpos_pwrdn = <2>;
- gvee_pwrdn = <8>;
- vneg_pwrdn = <10>;
- gpio_pmic_pwrgood = <&gpio2 13 0>;
- gpio_pmic_vcom_ctrl = <&gpio2 3 0>;
- gpio_pmic_wakeup = <&gpio2 14 0>;
- gpio_pmic_v3p3 = <&gpio2 7 0>;
- gpio_pmic_intr = <&gpio2 12 0>;
-
- regulators {
- DISPLAY_reg: DISPLAY {
- regulator-name = "DISPLAY";
- };
-
- GVDD_reg: GVDD {
- /* 20v */
- regulator-name = "GVDD";
- };
-
- GVEE_reg: GVEE {
- /* -22v */
- regulator-name = "GVEE";
- };
-
- HVINN_reg: HVINN {
- /* -22v */
- regulator-name = "HVINN";
- };
-
- HVINP_reg: HVINP {
- /* 20v */
- regulator-name = "HVINP";
- };
-
- VCOM_reg: VCOM {
- regulator-name = "VCOM";
- /* 2's-compliment, -4325000 */
- regulator-min-microvolt = <0xffbe0178>;
- /* 2's-compliment, -500000 */
- regulator-max-microvolt = <0xfff85ee0>;
- };
-
- VNEG_reg: VNEG {
- /* -15v */
- regulator-name = "VNEG";
- };
-
- VPOS_reg: VPOS {
- /* 15v */
- regulator-name = "VPOS";
- };
-
- V3P3_reg: V3P3 {
- regulator-name = "V3P3";
- };
- };
- };
};
&i2c3 {
@@ -343,7 +278,7 @@
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
- codec: wm8962@1a {
+ wm8962: audio-codec@1a {
compatible = "wlf,wm8962";
reg = <0x1a>;
clocks = <&clks IMX6SLL_CLK_EXTERN_AUDIO>;
@@ -355,365 +290,37 @@
PLLVDD-supply = <&vgen3_reg>;
SPKVDD1-supply = <®_aud4v>;
SPKVDD2-supply = <®_aud4v>;
- amic-mono;
};
};
-&gpc {
- fsl,ldo-bypass = <1>;
-};
-
-&iomuxc {
+&lcdif {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- imx6sll-evk {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x17059
- MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22 0x17059
- MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x17059
- /*
- * Must set the LVE of pad SD2_RESET, otherwise current
- * leakage through eMMC chip will pull high the VCCQ to
- * 2.6v, which will impact SD1 and SD3 SD3.0 voltage switch.
- */
- MX6SLL_PAD_SD2_RESET__GPIO4_IO27 0x417059
- MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059
- MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 /* SD3 CD */
- MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059 /*SD3 RESET */
- MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059
- MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x17059 /* HP DETECT */
- /* CHG_FLT, CHG_UOK/DOK, CHG_STATUS */
- MX6SLL_PAD_ECSPI2_MISO__GPIO4_IO14 0x17000
- MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x17000
- MX6SLL_PAD_ECSPI2_SS0__GPIO4_IO15 0x17000
- >;
- };
-
- pinctrl_audmux3: audmux3grp {
- fsl,pins = <
- MX6SLL_PAD_AUD_TXC__AUD3_TXC 0x4130b0
- MX6SLL_PAD_AUD_TXFS__AUD3_TXFS 0x4130b0
- MX6SLL_PAD_AUD_TXD__AUD3_TXD 0x4110b0
- MX6SLL_PAD_AUD_RXD__AUD3_RXD 0x4130b0
- MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0
- >;
- };
-
- pinctrl_csi1: csi1grp {
- fsl,pins = <
- MX6SLL_PAD_EPDC_GDRL__CSI_MCLK 0x1b088
- MX6SLL_PAD_EPDC_GDCLK__CSI_PIXCLK 0x1b088
- MX6SLL_PAD_EPDC_GDSP__CSI_VSYNC 0x1b088
- MX6SLL_PAD_EPDC_GDOE__CSI_HSYNC 0x1b088
- MX6SLL_PAD_EPDC_DATA02__CSI_DATA02 0x1b088
- MX6SLL_PAD_EPDC_DATA03__CSI_DATA03 0x1b088
- MX6SLL_PAD_EPDC_DATA04__CSI_DATA04 0x1b088
- MX6SLL_PAD_EPDC_DATA05__CSI_DATA05 0x1b088
- MX6SLL_PAD_EPDC_DATA06__CSI_DATA06 0x1b088
- MX6SLL_PAD_EPDC_DATA07__CSI_DATA07 0x1b088
- MX6SLL_PAD_EPDC_SDCLK__CSI_DATA08 0x1b088
- MX6SLL_PAD_EPDC_SDLE__CSI_DATA09 0x1b088
- MX6SLL_PAD_EPDC_SDSHR__GPIO1_IO26 0x80000000
- MX6SLL_PAD_EPDC_SDOE__GPIO1_IO25 0x80000000
- >;
- };
-
- pinctrl_epdc0: epdcgrp0 {
- fsl,pins = <
- MX6SLL_PAD_EPDC_DATA00__EPDC_DATA00 0x100b1
- MX6SLL_PAD_EPDC_DATA01__EPDC_DATA01 0x100b1
- MX6SLL_PAD_EPDC_DATA02__EPDC_DATA02 0x100b1
- MX6SLL_PAD_EPDC_DATA03__EPDC_DATA03 0x100b1
- MX6SLL_PAD_EPDC_DATA04__EPDC_DATA04 0x100b1
- MX6SLL_PAD_EPDC_DATA05__EPDC_DATA05 0x100b1
- MX6SLL_PAD_EPDC_DATA06__EPDC_DATA06 0x100b1
- MX6SLL_PAD_EPDC_DATA07__EPDC_DATA07 0x100b1
- MX6SLL_PAD_EPDC_DATA08__EPDC_DATA08 0x100b1
- MX6SLL_PAD_EPDC_DATA09__EPDC_DATA09 0x100b1
- MX6SLL_PAD_EPDC_DATA10__EPDC_DATA10 0x100b1
- MX6SLL_PAD_EPDC_DATA11__EPDC_DATA11 0x100b1
- MX6SLL_PAD_EPDC_DATA12__EPDC_DATA12 0x100b1
- MX6SLL_PAD_EPDC_DATA13__EPDC_DATA13 0x100b1
- MX6SLL_PAD_EPDC_DATA14__EPDC_DATA14 0x100b1
- MX6SLL_PAD_EPDC_DATA15__EPDC_DATA15 0x100b1
- MX6SLL_PAD_EPDC_SDCLK__EPDC_SDCLK_P 0x100b1
- MX6SLL_PAD_EPDC_SDLE__EPDC_SDLE 0x100b1
- MX6SLL_PAD_EPDC_SDOE__EPDC_SDOE 0x100b1
- MX6SLL_PAD_EPDC_SDSHR__EPDC_SDSHR 0x100b1
- MX6SLL_PAD_EPDC_SDCE0__EPDC_SDCE0 0x100b1
- MX6SLL_PAD_EPDC_GDCLK__EPDC_GDCLK 0x100b1
- MX6SLL_PAD_EPDC_GDOE__EPDC_GDOE 0x100b1
- MX6SLL_PAD_EPDC_GDRL__EPDC_GDRL 0x100b1
- MX6SLL_PAD_EPDC_GDSP__EPDC_GDSP 0x100b1
- >;
- };
-
- pinctrl_lcdif_dat: lcdifdatgrp {
- fsl,pins = <
- MX6SLL_PAD_LCD_DATA00__LCD_DATA00 0x79
- MX6SLL_PAD_LCD_DATA01__LCD_DATA01 0x79
- MX6SLL_PAD_LCD_DATA02__LCD_DATA02 0x79
- MX6SLL_PAD_LCD_DATA03__LCD_DATA03 0x79
- MX6SLL_PAD_LCD_DATA04__LCD_DATA04 0x79
- MX6SLL_PAD_LCD_DATA05__LCD_DATA05 0x79
- MX6SLL_PAD_LCD_DATA06__LCD_DATA06 0x79
- MX6SLL_PAD_LCD_DATA07__LCD_DATA07 0x79
- MX6SLL_PAD_LCD_DATA08__LCD_DATA08 0x79
- MX6SLL_PAD_LCD_DATA09__LCD_DATA09 0x79
- MX6SLL_PAD_LCD_DATA10__LCD_DATA10 0x79
- MX6SLL_PAD_LCD_DATA11__LCD_DATA11 0x79
- MX6SLL_PAD_LCD_DATA12__LCD_DATA12 0x79
- MX6SLL_PAD_LCD_DATA13__LCD_DATA13 0x79
- MX6SLL_PAD_LCD_DATA14__LCD_DATA14 0x79
- MX6SLL_PAD_LCD_DATA15__LCD_DATA15 0x79
- MX6SLL_PAD_LCD_DATA16__LCD_DATA16 0x79
- MX6SLL_PAD_LCD_DATA17__LCD_DATA17 0x79
- MX6SLL_PAD_LCD_DATA18__LCD_DATA18 0x79
- MX6SLL_PAD_LCD_DATA19__LCD_DATA19 0x79
- MX6SLL_PAD_LCD_DATA20__LCD_DATA20 0x79
- MX6SLL_PAD_LCD_DATA21__LCD_DATA21 0x79
- MX6SLL_PAD_LCD_DATA22__LCD_DATA22 0x79
- MX6SLL_PAD_LCD_DATA23__LCD_DATA23 0x79
- >;
- };
-
- pinctrl_lcdif_ctrl: lcdifctrlgrp {
- fsl,pins = <
- MX6SLL_PAD_LCD_CLK__LCD_CLK 0x79
- MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE 0x79
- MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC 0x79
- MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC 0x79
- MX6SLL_PAD_LCD_RESET__LCD_RESET 0x79
- MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08 0x79
- >;
- };
-
- pinctrl_max17135: max17135grp-1 {
- fsl,pins = <
- MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13 0x80000000 /* pwrgood */
- MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03 0x80000000 /* vcom_ctrl */
- MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14 0x80000000 /* wakeup */
- MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07 0x80000000 /* v3p3 */
- MX6SLL_PAD_EPDC_PWR_IRQ__GPIO2_IO12 0x80000000 /* pwr int */
- >;
- };
-
- pinctrl_spdif: spdifgrp {
- fsl,pins = <
- MX6SLL_PAD_SD2_DATA4__SPDIF_OUT 0x4130b0
- >;
- };
-
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
- MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
- >;
- };
-
- pinctrl_uart5: uart5grp {
- fsl,pins = <
- MX6SLL_PAD_KEY_ROW1__GPIO3_IO27 0x1b0b1 /* bt reg on */
- MX6SLL_PAD_ECSPI1_MOSI__UART5_DCE_TX 0x1b0b1
- MX6SLL_PAD_ECSPI1_SCLK__UART5_DCE_RX 0x1b0b1
- MX6SLL_PAD_ECSPI1_SS0__UART5_DCE_CTS 0x1b0b1
- MX6SLL_PAD_ECSPI1_MISO__UART5_DCE_RTS 0x1b0b1
- >;
- };
-
- pinctrl_uart5dte: uart5dtegrp {
- fsl,pins = <
- MX6SLL_PAD_ECSPI1_MOSI__UART5_DTE_RX 0x1b0b1
- MX6SLL_PAD_ECSPI1_SCLK__UART5_DTE_TX 0x1b0b1
- MX6SLL_PAD_ECSPI1_SS0__UART5_DTE_RTS 0x1b0b1
- MX6SLL_PAD_ECSPI1_MISO__UART5_DTE_CTS 0x1b0b1
- >;
- };
-
- pinctrl_usdhc1: usdhc1grp {
- fsl,pins = <
- MX6SLL_PAD_SD1_CMD__SD1_CMD 0x17059
- MX6SLL_PAD_SD1_CLK__SD1_CLK 0x13059
- MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x17059
- MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x17059
- MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x17059
- MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x17059
- >;
- };
-
- pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
- fsl,pins = <
- MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170b9
- MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130b9
- MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170b9
- MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170b9
- MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170b9
- MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170b9
- >;
- };
-
- pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
- fsl,pins = <
- MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170f9
- MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130f9
- MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170f9
- MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170f9
- MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170f9
- MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170f9
- >;
- };
-
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX6SLL_PAD_SD2_CMD__SD2_CMD 0x17059
- MX6SLL_PAD_SD2_CLK__SD2_CLK 0x13059
- MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x17059
- MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x17059
- MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x17059
- MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x17059
- MX6SLL_PAD_SD2_DATA4__SD2_DATA4 0x17059
- MX6SLL_PAD_SD2_DATA5__SD2_DATA5 0x17059
- MX6SLL_PAD_SD2_DATA6__SD2_DATA6 0x17059
- MX6SLL_PAD_SD2_DATA7__SD2_DATA7 0x17059
- MX6SLL_PAD_GPIO4_IO21__SD2_STROBE 0x413059
- >;
- };
-
- pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
- fsl,pins = <
- MX6SLL_PAD_SD2_CMD__SD2_CMD 0x170b9
- MX6SLL_PAD_SD2_CLK__SD2_CLK 0x130b9
- MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x170b9
- MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x170b9
- MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x170b9
- MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x170b9
- MX6SLL_PAD_SD2_DATA4__SD2_DATA4 0x170b9
- MX6SLL_PAD_SD2_DATA5__SD2_DATA5 0x170b9
- MX6SLL_PAD_SD2_DATA6__SD2_DATA6 0x170b9
- MX6SLL_PAD_SD2_DATA7__SD2_DATA7 0x170b9
- MX6SLL_PAD_GPIO4_IO21__SD2_STROBE 0x4130b9
- >;
- };
-
- pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
- fsl,pins = <
- MX6SLL_PAD_SD2_CMD__SD2_CMD 0x170f9
- MX6SLL_PAD_SD2_CLK__SD2_CLK 0x130f9
- MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x170f9
- MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x170f9
- MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x170f9
- MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x170f9
- MX6SLL_PAD_SD2_DATA4__SD2_DATA4 0x170f9
- MX6SLL_PAD_SD2_DATA5__SD2_DATA5 0x170f9
- MX6SLL_PAD_SD2_DATA6__SD2_DATA6 0x170f9
- MX6SLL_PAD_SD2_DATA7__SD2_DATA7 0x170f9
- MX6SLL_PAD_GPIO4_IO21__SD2_STROBE 0x4130f9
- >;
- };
-
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <
- MX6SLL_PAD_SD3_CMD__SD3_CMD 0x17059
- MX6SLL_PAD_SD3_CLK__SD3_CLK 0x13059
- MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x17059
- MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x17059
- MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x17059
- MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x17059
- >;
- };
-
- pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
- fsl,pins = <
- MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170b9
- MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130b9
- MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170b9
- MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170b9
- MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170b9
- MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170b9
- >;
- };
-
- pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
- fsl,pins = <
- MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170f9
- MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130f9
- MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170f9
- MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170f9
- MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170f9
- MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170f9
- >;
- };
-
- pinctrl_usbotg1: usbotg1grp {
- fsl,pins = <
- MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
- >;
- };
-
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1
- MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1
- >;
- };
-
- pinctrl_i2c3: i2c3grp {
- fsl,pins = <
- MX6SLL_PAD_AUD_RXFS__I2C3_SCL 0x4041b8b1
- MX6SLL_PAD_AUD_RXC__I2C3_SDA 0x4041b8b1
- >;
- };
+ pinctrl-0 = <&pinctrl_lcd>;
+ status = "okay";
- pinctrl_pwm1: pmw1grp {
- fsl,pins = <
- MX6SLL_PAD_PWM1__PWM1_OUT 0x110b0
- >;
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
};
};
};
-&lcdif {
+&pwm1 {
+ #pwm-cells = <2>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcdif_dat
- &pinctrl_lcdif_ctrl>;
- lcd-supply = <®_lcd>;
- display = <&display>;
+ pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
+};
- display: display {
- bits-per-pixel = <16>;
- bus-width = <24>;
-
- display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
- clock-frequency = <33500000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <89>;
- hfront-porch = <164>;
- vback-porch = <23>;
- vfront-porch = <10>;
- hsync-len = <10>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
- };
+&snvs_poweroff {
+ status = "okay";
};
-&pxp {
+&snvs_pwrkey {
status = "okay";
};
-&pwm1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm1>;
+&ssi2 {
status = "okay";
};
@@ -723,16 +330,6 @@
status = "okay";
};
-&uart5 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart5>;
- fsl,uart-has-rtscts;
- /* for DTE mode, add below change */
- /* fsl,dte-mode; */
- /* pinctrl-0 = <&pinctrl_uart5dte>; */
- status = "disabled";
-};
-
&usdhc1 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
@@ -741,34 +338,11 @@
cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
keep-power-in-suspend;
- enable-sdio-wakeup;
+ wakeup-source;
vmmc-supply = <®_sd1_vmmc>;
status = "okay";
};
-&usdhc2 {
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc2>;
- pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
- pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
- vqmmc-supply = <®_sd2_vmmc>;
- bus-width = <8>;
- no-removable;
- status = "okay";
-};
-
-&usdhc3 {
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc3>;
- pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
- pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
- cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
- keep-power-in-suspend;
- enable-sdio-wakeup;
- vmmc-supply = <®_sd3_vmmc>;
- status = "okay";
-};
-
&usbotg1 {
vbus-supply = <®_usb_otg1_vbus>;
pinctrl-names = "default";
@@ -787,15 +361,216 @@
status = "okay";
};
-&epdc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_epdc0>;
- V3P3-supply = <&V3P3_reg>;
- VCOM-supply = <&VCOM_reg>;
- DISPLAY-supply = <&DISPLAY_reg>;
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+ keep-power-in-suspend;
+ wakeup-source;
+ vmmc-supply = <®_sd3_vmmc>;
status = "okay";
};
-&ssi2 {
- status = "okay";
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog1>;
+ fsl,ext-reset-output;
+};
+
+&iomuxc {
+ pinctrl_audmux3: audmux3grp {
+ fsl,pins = <
+ MX6SLL_PAD_AUD_TXC__AUD3_TXC 0x4130b0
+ MX6SLL_PAD_AUD_TXFS__AUD3_TXFS 0x4130b0
+ MX6SLL_PAD_AUD_TXD__AUD3_TXD 0x4110b0
+ MX6SLL_PAD_AUD_RXD__AUD3_RXD 0x4130b0
+ MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0
+ >;
+ };
+
+ pinctrl_hp: hpgrp {
+ fsl,pins = <
+ MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x17059 /* HP DETECT */
+ >;
+ };
+
+ pinctrl_reg_sd3_vmmc: sd3vmmcgrp {
+ fsl,pins = <
+ MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059
+ >;
+ };
+
+ pinctrl_usb_otg1_vbus: vbus1grp {
+ fsl,pins = <
+ MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059
+ >;
+ };
+
+ pinctrl_usb_otg2_vbus: vbus2grp {
+ fsl,pins = <
+ MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059
+ >;
+ };
+
+ pinctrl_reg_lcd_3v3: reglcd3v3grp {
+ fsl,pins = <
+ MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 0x17059
+ >;
+ };
+
+ pinctrl_reg_sd1_vmmc: sd1vmmcgrp {
+ fsl,pins = <
+ MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x17059
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
+ MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6SLL_PAD_SD1_CMD__SD1_CMD 0x17059
+ MX6SLL_PAD_SD1_CLK__SD1_CLK 0x13059
+ MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x17059
+ MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x17059
+ MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x17059
+ MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+ fsl,pins = <
+ MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170b9
+ MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130b9
+ MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170b9
+ MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170b9
+ MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170b9
+ MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+ fsl,pins = <
+ MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170f9
+ MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130f9
+ MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170f9
+ MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170f9
+ MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170f9
+ MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6SLL_PAD_SD3_CMD__SD3_CMD 0x17061
+ MX6SLL_PAD_SD3_CLK__SD3_CLK 0x13061
+ MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x17061
+ MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x17061
+ MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x17061
+ MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x17061
+ MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+ fsl,pins = <
+ MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170a1
+ MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130a1
+ MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170a1
+ MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170a1
+ MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170a1
+ MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170a1
+ MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+ fsl,pins = <
+ MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170e9
+ MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130f9
+ MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170e9
+ MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170e9
+ MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170e9
+ MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170e9
+ MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1
+ MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6SLL_PAD_AUD_RXFS__I2C3_SCL 0x4041b8b1
+ MX6SLL_PAD_AUD_RXC__I2C3_SDA 0x4041b8b1
+ >;
+ };
+
+ pinctrl_lcd: lcdgrp {
+ fsl,pins = <
+ MX6SLL_PAD_LCD_DATA00__LCD_DATA00 0x79
+ MX6SLL_PAD_LCD_DATA01__LCD_DATA01 0x79
+ MX6SLL_PAD_LCD_DATA02__LCD_DATA02 0x79
+ MX6SLL_PAD_LCD_DATA03__LCD_DATA03 0x79
+ MX6SLL_PAD_LCD_DATA04__LCD_DATA04 0x79
+ MX6SLL_PAD_LCD_DATA05__LCD_DATA05 0x79
+ MX6SLL_PAD_LCD_DATA06__LCD_DATA06 0x79
+ MX6SLL_PAD_LCD_DATA07__LCD_DATA07 0x79
+ MX6SLL_PAD_LCD_DATA08__LCD_DATA08 0x79
+ MX6SLL_PAD_LCD_DATA09__LCD_DATA09 0x79
+ MX6SLL_PAD_LCD_DATA10__LCD_DATA10 0x79
+ MX6SLL_PAD_LCD_DATA11__LCD_DATA11 0x79
+ MX6SLL_PAD_LCD_DATA12__LCD_DATA12 0x79
+ MX6SLL_PAD_LCD_DATA13__LCD_DATA13 0x79
+ MX6SLL_PAD_LCD_DATA14__LCD_DATA14 0x79
+ MX6SLL_PAD_LCD_DATA15__LCD_DATA15 0x79
+ MX6SLL_PAD_LCD_DATA16__LCD_DATA16 0x79
+ MX6SLL_PAD_LCD_DATA17__LCD_DATA17 0x79
+ MX6SLL_PAD_LCD_DATA18__LCD_DATA18 0x79
+ MX6SLL_PAD_LCD_DATA19__LCD_DATA19 0x79
+ MX6SLL_PAD_LCD_DATA20__LCD_DATA20 0x79
+ MX6SLL_PAD_LCD_DATA21__LCD_DATA21 0x79
+ MX6SLL_PAD_LCD_DATA22__LCD_DATA22 0x79
+ MX6SLL_PAD_LCD_DATA23__LCD_DATA23 0x79
+ MX6SLL_PAD_LCD_CLK__LCD_CLK 0x79
+ MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE 0x79
+ MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC 0x79
+ MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC 0x79
+ MX6SLL_PAD_LCD_RESET__LCD_RESET 0x79
+ >;
+ };
+
+ pinctrl_led: ledgrp {
+ fsl,pins = <
+ MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04 0x17059
+ >;
+ };
+
+ pinctrl_pwm1: pmw1grp {
+ fsl,pins = <
+ MX6SLL_PAD_PWM1__PWM1_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_wdog1: wdog1grp {
+ fsl,pins = <
+ MX6SLL_PAD_WDOG_B__WDOG1_B 0x170b0
+ >;
+ };
};
diff --git a/arch/arm/dts/imx6sll.dtsi b/arch/arm/dts/imx6sll.dtsi
index ebc6d9d2c988..d4a000c3dde7 100644
--- a/arch/arm/dts/imx6sll.dtsi
+++ b/arch/arm/dts/imx6sll.dtsi
@@ -1,18 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <dt-bindings/clock/imx6sll-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "imx6sll-pinfunc.h"
-#include "skeleton.dtsi"
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
aliases {
gpio0 = &gpio1;
gpio1 = &gpio2;
@@ -35,6 +36,8 @@
spi1 = &ecspi2;
spi3 = &ecspi3;
spi4 = &ecspi4;
+ usb0 = &usbotg1;
+ usb1 = &usbotg2;
usbphy0 = &usbphy1;
usbphy1 = &usbphy2;
};
@@ -48,80 +51,58 @@
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2>;
- operating-points = <
+ operating-points =
/* kHz uV */
- 996000 1225000
- 792000 1175000
- 396000 1075000
- 198000 975000
- >;
- fsl,soc-operating-points = <
+ <996000 1275000>,
+ <792000 1175000>,
+ <396000 1075000>,
+ <198000 975000>;
+ fsl,soc-operating-points =
/* ARM kHz SOC-PU uV */
- 996000 1225000
- 792000 1175000
- 396000 1175000
- 198000 1175000
- >;
+ <996000 1175000>,
+ <792000 1175000>,
+ <396000 1175000>,
+ <198000 1175000>;
clock-latency = <61036>; /* two CLK32 periods */
- fsl,low-power-run;
+ #cooling-cells = <2>;
clocks = <&clks IMX6SLL_CLK_ARM>,
<&clks IMX6SLL_CLK_PLL2_PFD2>,
<&clks IMX6SLL_CLK_STEP>,
<&clks IMX6SLL_CLK_PLL1_SW>,
- <&clks IMX6SLL_CLK_PLL1_SYS>,
- <&clks IMX6SLL_CLK_PLL1>,
- <&clks IMX6SLL_PLL1_BYPASS>,
- <&clks IMX6SLL_PLL1_BYPASS_SRC>;
+ <&clks IMX6SLL_CLK_PLL1_SYS>;
clock-names = "arm", "pll2_pfd2_396m", "step",
- "pll1_sw", "pll1_sys", "pll1", "pll1_bypass",
- "pll1_bypass_src";
+ "pll1_sw", "pll1_sys";
+ nvmem-cells = <&cpu_speed_grade>;
+ nvmem-cell-names = "speed_grade";
};
};
- intc: interrupt-controller@00a01000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x00a01000 0x1000>,
- <0x00a00100 0x100>;
- interrupt-parent = <&intc>;
+ ckil: clock-ckil {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "ckil";
};
- clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ckil: clock@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "ckil";
- };
-
- osc: clock@1 {
- compatible = "fixed-clock";
- reg = <1>;
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- clock-output-names = "osc";
- };
+ osc: clock-osc-24m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "osc";
+ };
- ipp_di0: clock@2 {
- compatible = "fixed-clock";
- reg = <2>;
- #clock-cells = <0>;
- clock-frequency = <0>;
- clock-output-names = "ipp_di0";
- };
+ ipp_di0: clock-ipp-di0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "ipp_di0";
+ };
- ipp_di1: clock@3 {
- compatible = "fixed-clock";
- reg = <3>;
- #clock-cells = <0>;
- clock-frequency = <0>;
- clock-output-names = "ipp_di1";
- };
+ ipp_di1: clock-ipp-di1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "ipp_di1";
};
soc {
@@ -131,42 +112,21 @@
interrupt-parent = <&gpc>;
ranges;
- busfreq {
- compatible = "fsl,imx_busfreq";
- clocks = <&clks IMX6SLL_CLK_PLL2_PFD2>, <&clks IMX6SLL_CLK_PLL2_198M>,
- <&clks IMX6SLL_CLK_PLL2_BUS>, <&clks IMX6SLL_CLK_ARM>,
- <&clks IMX6SLL_CLK_PLL3_USB_OTG>, <&clks IMX6SLL_CLK_PERIPH>,
- <&clks IMX6SLL_CLK_PERIPH_PRE>, <&clks IMX6SLL_CLK_PERIPH_CLK2>,
- <&clks IMX6SLL_CLK_PERIPH_CLK2_SEL>, <&clks IMX6SLL_CLK_OSC>,
- <&clks IMX6SLL_CLK_AHB>, <&clks IMX6SLL_CLK_AXI_PODF>,
- <&clks IMX6SLL_CLK_PERIPH2>, <&clks IMX6SLL_CLK_PERIPH2_PRE>,
- <&clks IMX6SLL_CLK_PERIPH2_CLK2>, <&clks IMX6SLL_CLK_PERIPH2_CLK2_SEL>,
- <&clks IMX6SLL_CLK_STEP>, <&clks IMX6SLL_CLK_MMDC_P0_FAST>, <&clks IMX6SLL_PLL1_BYPASS_SRC>,
- <&clks IMX6SLL_PLL1_BYPASS>, <&clks IMX6SLL_CLK_PLL1_SYS>, <&clks IMX6SLL_CLK_PLL1_SW>,
- <&clks IMX6SLL_CLK_PLL1>;
- clock-names = "pll2_pfd2_396m", "pll2_198m", "pll2_bus", "arm", "pll3_usb_otg",
- "periph", "periph_pre", "periph_clk2", "periph_clk2_sel", "osc",
- "ahb", "ocram", "periph2", "periph2_pre", "periph2_clk2", "periph2_clk2_sel",
- "step", "mmdc", "pll1_bypass_src", "pll1_bypass", "pll1_sys", "pll1_sw", "pll1";
- fsl,max_ddr_freq = <400000000>;
- };
-
- ocrams: sram@00900000 {
- compatible = "fsl,lpm-sram";
- reg = <0x00900000 0x4000>;
+ ocram: sram@900000 {
+ compatible = "mmio-sram";
+ reg = <0x00900000 0x20000>;
};
- ocrams_ddr: sram@00904000 {
- compatible = "fsl,ddr-lpm-sram";
- reg = <0x00904000 0x1000>;
+ intc: interrupt-controller@a01000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x00a01000 0x1000>,
+ <0x00a00100 0x100>;
+ interrupt-parent = <&intc>;
};
- ocram: sram@00905000 {
- compatible = "mmio-sram";
- reg = <0x00905000 0x1B000>;
- };
-
- L2: l2-cache@00a02000 {
+ L2: cache-controller@a02000 {
compatible = "arm,pl310-cache";
reg = <0x00a02000 0x1000>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -176,21 +136,21 @@
arm,data-latency = <4 2 3>;
};
- aips1: bus@02000000 {
+ aips1: bus@2000000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x100000>;
ranges;
- spba: spba-bus@02000000 {
+ spba: spba-bus@2000000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x40000>;
ranges;
- spdif: spdif@02004000 {
+ spdif: spdif@2004000 {
compatible = "fsl,imx6sl-spdif", "fsl,imx35-spdif";
reg = <0x02004000 0x4000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
@@ -214,7 +174,7 @@
status = "disabled";
};
- ecspi1: ecspi@02008000 {
+ ecspi1: spi@2008000 {
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
reg = <0x02008000 0x4000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
@@ -226,7 +186,7 @@
status = "disabled";
};
- ecspi2: ecspi@0200c000 {
+ ecspi2: spi@200c000 {
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
reg = <0x0200c000 0x4000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
@@ -238,7 +198,7 @@
status = "disabled";
};
- ecspi3: ecspi@02010000 {
+ ecspi3: spi@2010000 {
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
reg = <0x02010000 0x4000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
@@ -250,7 +210,7 @@
status = "disabled";
};
- ecspi4: ecspi@02014000 {
+ ecspi4: spi@2014000 {
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
reg = <0x02014000 0x4000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
@@ -262,10 +222,11 @@
status = "disabled";
};
- uart4: serial@02018000 {
- compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+ uart4: serial@2018000 {
+ compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
+ "fsl,imx21-uart";
reg = <0x02018000 0x4000>;
- interrupts =<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
dma-names = "rx", "tx";
clocks = <&clks IMX6SLL_CLK_UART4_IPG>,
@@ -274,8 +235,9 @@
status = "disabled";
};
- uart1: serial@02020000 {
- compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+ uart1: serial@2020000 {
+ compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
+ "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
@@ -286,8 +248,9 @@
status = "disabled";
};
- uart2: serial@02024000 {
- compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+ uart2: serial@2024000 {
+ compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
+ "fsl,imx21-uart";
reg = <0x02024000 0x4000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
@@ -298,8 +261,8 @@
status = "disabled";
};
- ssi1: ssi@02028000 {
- compatible = "fsl,imx6sll-ssi", "fsl,imx51-ssi";
+ ssi1: ssi@2028000 {
+ compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
reg = <0x02028000 0x4000>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 37 22 0>, <&sdma 38 22 0>;
@@ -311,8 +274,8 @@
status = "disabled";
};
- ssi2: ssi2@0202c000 {
- compatible = "fsl,imx6sll-ssi", "fsl,imx51-ssi";
+ ssi2: ssi@202c000 {
+ compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
reg = <0x0202c000 0x4000>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 41 22 0>, <&sdma 42 22 0>;
@@ -324,8 +287,8 @@
status = "disabled";
};
- ssi3: ssi@02030000 {
- compatible = "fsl,imx6sll-ssi", "fsl,imx51-ssi";
+ ssi3: ssi@2030000 {
+ compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
reg = <0x02030000 0x4000>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 45 22 0>, <&sdma 46 22 0>;
@@ -337,8 +300,9 @@
status = "disabled";
};
- uart3: serial@02034000 {
- compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+ uart3: serial@2034000 {
+ compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
+ "fsl,imx21-uart";
reg = <0x02034000 0x4000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
@@ -350,48 +314,48 @@
};
};
- pwm1: pwm@02080000 {
+ pwm1: pwm@2080000 {
compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
reg = <0x02080000 0x4000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_PWM1>,
<&clks IMX6SLL_CLK_PWM1>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
};
- pwm2: pwm@02084000 {
+ pwm2: pwm@2084000 {
compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
reg = <0x02084000 0x4000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_PWM2>,
<&clks IMX6SLL_CLK_PWM2>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
};
- pwm3: pwm@02088000 {
+ pwm3: pwm@2088000 {
compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
reg = <0x02088000 0x4000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_PWM3>,
<&clks IMX6SLL_CLK_PWM3>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
};
- pwm4: pwm@0208c000 {
+ pwm4: pwm@208c000 {
compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
reg = <0x0208c000 0x4000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_PWM4>,
<&clks IMX6SLL_CLK_PWM4>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
};
- gpt1: gpt@02098000 {
- compatible = "fsl,imx6sll-gpt";
+ gpt1: timer@2098000 {
+ compatible = "fsl,imx6sl-gpt";
reg = <0x02098000 0x4000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_GPT_BUS>,
@@ -399,73 +363,104 @@
clock-names = "ipg", "per";
};
- gpio1: gpio@0209c000 {
+ gpio1: gpio@209c000 {
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
reg = <0x0209c000 0x4000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO1>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 94 7>, <&iomuxc 7 25 25>;
};
- gpio2: gpio@020a0000 {
+ gpio2: gpio@20a0000 {
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
reg = <0x020a0000 0x4000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO2>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 50 32>;
};
- gpio3: gpio@020a4000 {
+ gpio3: gpio@20a4000 {
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
reg = <0x020a4000 0x4000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO3>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 82 12>, <&iomuxc 12 103 4>,
+ <&iomuxc 16 101 2>, <&iomuxc 18 5 1>,
+ <&iomuxc 21 6 11>;
};
- gpio4: gpio@020a8000 {
+ gpio4: gpio@20a8000 {
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
reg = <0x020a8000 0x4000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO4>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- };
-
- gpio5: gpio@020ac000 {
+ gpio-ranges = <&iomuxc 0 17 8>, <&iomuxc 8 107 8>,
+ <&iomuxc 16 151 1>, <&iomuxc 17 149 1>,
+ <&iomuxc 18 146 1>, <&iomuxc 19 144 1>,
+ <&iomuxc 20 142 1>, <&iomuxc 21 143 1>,
+ <&iomuxc 22 150 1>, <&iomuxc 23 148 1>,
+ <&iomuxc 24 147 1>, <&iomuxc 25 145 1>,
+ <&iomuxc 26 152 1>, <&iomuxc 27 125 1>,
+ <&iomuxc 28 131 1>, <&iomuxc 29 134 1>,
+ <&iomuxc 30 129 1>, <&iomuxc 31 133 1>;
+ };
+
+ gpio5: gpio@20ac000 {
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
reg = <0x020ac000 0x4000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO5>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- };
-
- gpio6: gpio@020b0000 {
+ gpio-ranges = <&iomuxc 0 135 1>, <&iomuxc 1 128 1>,
+ <&iomuxc 2 132 1>, <&iomuxc 3 130 1>,
+ <&iomuxc 4 127 1>, <&iomuxc 5 126 1>,
+ <&iomuxc 6 120 1>, <&iomuxc 7 123 1>,
+ <&iomuxc 8 118 1>, <&iomuxc 9 122 1>,
+ <&iomuxc 10 124 1>, <&iomuxc 11 117 1>,
+ <&iomuxc 12 121 1>, <&iomuxc 13 119 1>,
+ <&iomuxc 14 116 1>, <&iomuxc 15 115 1>,
+ <&iomuxc 16 140 2>, <&iomuxc 18 136 1>,
+ <&iomuxc 19 138 1>, <&iomuxc 20 139 1>,
+ <&iomuxc 21 137 1>;
+ };
+
+ gpio6: gpio@20b0000 {
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
reg = <0x020b0000 0x4000>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO6>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- kpp: kpp@020b8000 {
+ kpp: keypad@20b8000 {
compatible = "fsl,imx6sll-kpp", "fsl,imx21-kpp";
reg = <0x020b8000 0x4000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -473,14 +468,14 @@
status = "disabled";
};
- wdog1: wdog@020bc000 {
+ wdog1: watchdog@20bc000 {
compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_WDOG1>;
};
- wdog2: wdog@020c0000 {
+ wdog2: watchdog@20c0000 {
compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
@@ -488,7 +483,7 @@
status = "disabled";
};
- clks: ccm@020c4000 {
+ clks: clock-controller@20c4000 {
compatible = "fsl,imx6sll-ccm";
reg = <0x020c4000 0x4000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
@@ -496,19 +491,25 @@
#clock-cells = <1>;
clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+
+ assigned-clocks = <&clks IMX6SLL_CLK_PERCLK_SEL>;
+ assigned-clock-parents = <&clks IMX6SLL_CLK_OSC>;
};
- anatop: anatop@020c8000 {
+ anatop: anatop@20c8000 {
compatible = "fsl,imx6sll-anatop",
"fsl,imx6q-anatop",
- "syscon", "simple-bus";
+ "syscon", "simple-mfd";
reg = <0x020c8000 0x4000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_3p0: regulator-3p0@120 {
+ reg_3p0: regulator-3p0@20c8120 {
compatible = "fsl,anatop-regulator";
+ reg = <0x20c8120>;
regulator-name = "vdd3p0";
regulator-min-microvolt = <2625000>;
regulator-max-microvolt = <3400000>;
@@ -520,18 +521,19 @@
anatop-max-voltage = <3400000>;
anatop-enable-bit = <0>;
};
- };
- tempmon: tempmon {
- compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- fsl,tempmon = <&anatop>;
- fsl,tempmon-data = <&ocotp>;
- clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
- status = "disabled";
+ tempmon: temperature-sensor {
+ compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gpc>;
+ fsl,tempmon = <&anatop>;
+ nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+ nvmem-cell-names = "calib", "temp_grade";
+ clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
+ };
};
- usbphy1: usbphy@020c9000 {
+ usbphy1: usb-phy@20c9000 {
compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
"fsl,imx23-usbphy";
reg = <0x020c9000 0x1000>;
@@ -541,7 +543,7 @@
fsl,anatop = <&anatop>;
};
- usbphy2: usbphy@020ca000 {
+ usbphy2: usb-phy@20ca000 {
compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
"fsl,imx23-usbphy";
reg = <0x020ca000 0x1000>;
@@ -551,7 +553,7 @@
fsl,anatop = <&anatop>;
};
- snvs: snvs@020cc000 {
+ snvs: snvs@20cc000 {
compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
reg = <0x020cc000 0x4000>;
@@ -559,7 +561,8 @@
compatible = "fsl,sec-v4.0-mon-rtc-lp";
regmap = <&snvs>;
offset = <0x34>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
};
snvs_poweroff: snvs-poweroff {
@@ -567,6 +570,7 @@
regmap = <&snvs>;
offset = <0x38>;
mask = <0x61>;
+ status = "disabled";
};
snvs_pwrkey: snvs-powerkey {
@@ -574,21 +578,12 @@
regmap = <&snvs>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
linux,keycode = <KEY_POWER>;
- wakeup;
+ wakeup-source;
+ status = "disabled";
};
};
- epit1: epit@020d0000 {
- reg = <0x020d0000 0x4000>;
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- epit2: epit@020d4000 {
- reg = <0x020d4000 0x4000>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- src: src@020d8000 {
+ src: reset-controller@20d8000 {
compatible = "fsl,imx6sll-src", "fsl,imx51-src";
reg = <0x020d8000 0x4000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
@@ -596,28 +591,27 @@
#reset-cells = <1>;
};
- gpc: gpc@020dc000 {
+ gpc: interrupt-controller@20dc000 {
compatible = "fsl,imx6sll-gpc", "fsl,imx6q-gpc";
reg = <0x020dc000 0x4000>;
interrupt-controller;
#interrupt-cells = <3>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&intc>;
- fsl,mf-mix-wakeup-irq = <0x7c00000 0x7d00 0x0 0x1400640>;
};
- iomuxc: iomuxc@020e0000 {
+ iomuxc: pinctrl@20e0000 {
compatible = "fsl,imx6sll-iomuxc";
reg = <0x020e0000 0x4000>;
};
- gpr: iomuxc-gpr@020e4000 {
+ gpr: iomuxc-gpr@20e4000 {
compatible = "fsl,imx6sll-iomuxc-gpr",
"fsl,imx6q-iomuxc-gpr", "syscon";
reg = <0x020e4000 0x4000>;
};
- csi: csi@020e8000 {
+ csi: csi@20e8000 {
compatible = "fsl,imx6sll-csi", "fsl,imx6s-csi";
reg = <0x020e8000 0x4000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
@@ -628,11 +622,11 @@
status = "disabled";
};
- sdma: sdma@020ec000 {
- compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma";
+ sdma: dma-controller@20ec000 {
+ compatible = "fsl,imx6sll-sdma", "fsl,imx6ul-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SLL_CLK_SDMA>,
+ clocks = <&clks IMX6SLL_CLK_IPG>,
<&clks IMX6SLL_CLK_SDMA>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
@@ -640,27 +634,16 @@
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
};
- pxp: pxp@020f0000 {
- compatible = "fsl,imx6ull-pxp-dma", "fsl,imx7d-pxp-dma";
- reg = <0x020f0000 0x4000>;
+ pxp: pxp@20f0000 {
+ compatible = "fsl,imx6sll-pxp", "fsl,imx6ull-pxp";
+ reg = <0x20f0000 0x4000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SLL_CLK_DUMMY>,
- <&clks IMX6SLL_CLK_PXP>;
- clock-names = "pxp_ipg", "pxp_axi";
- status = "disabled";
- };
-
- epdc: epdc@020f4000 {
- compatible = "fsl,imx6sll-epdc", "fsl,imx7d-epdc";
- reg = <0x020f4000 0x4000>;
- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SLL_CLK_EPDC_AXI>, <&clks IMX6SLL_CLK_EPDC_PIX>;
- clock-names = "epdc_axi", "epdc_pix";
- status = "disabled";
+ clocks = <&clks IMX6SLL_CLK_PXP>;
+ clock-names = "axi";
};
- lcdif: lcdif@020f8000 {
+ lcdif: lcd-controller@20f8000 {
compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif";
reg = <0x020f8000 0x4000>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
@@ -671,8 +654,8 @@
status = "disabled";
};
- dcp: dcp@020fc000 {
- compatible = "fsl,imx6sl-dcp";
+ dcp: crypto@20fc000 {
+ compatible = "fsl,imx28-dcp";
reg = <0x020fc000 0x4000>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
@@ -682,14 +665,14 @@
};
};
- aips2: bus@02100000 {
+ aips2: bus@2100000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02100000 0x100000>;
ranges;
- usbotg1: usb@02184000 {
+ usbotg1: usb@2184000 {
compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
"fsl,imx27-usb";
reg = <0x02184000 0x200>;
@@ -704,7 +687,7 @@
status = "disabled";
};
- usbotg2: usb@02184200 {
+ usbotg2: usb@2184200 {
compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
"fsl,imx27-usb";
reg = <0x02184200 0x200>;
@@ -718,14 +701,14 @@
status = "disabled";
};
- usbmisc: usbmisc@02184800 {
+ usbmisc: usbmisc@2184800 {
#index-cells = <1>;
compatible = "fsl,imx6sll-usbmisc", "fsl,imx6ul-usbmisc",
"fsl,imx6q-usbmisc";
reg = <0x02184800 0x200>;
};
- usdhc1: usdhc@02190000 {
+ usdhc1: mmc@2190000 {
compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
reg = <0x02190000 0x4000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -739,7 +722,7 @@
status = "disabled";
};
- usdhc2: usdhc@02194000 {
+ usdhc2: mmc@2194000 {
compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
reg = <0x02194000 0x4000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -753,7 +736,7 @@
status = "disabled";
};
- usdhc3: usdhc@02198000 {
+ usdhc3: mmc@2198000 {
compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
reg = <0x02198000 0x4000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
@@ -767,17 +750,17 @@
status = "disabled";
};
- i2c1: i2c@021a0000 {
+ i2c1: i2c@21a0000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fs,imx6sll-i2c", "fsl,imx21-i2c";
+ compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
reg = <0x021a0000 0x4000>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_I2C1>;
status = "disabled";
};
- i2c2: i2c@021a4000 {
+ i2c2: i2c@21a4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
@@ -787,7 +770,7 @@
status = "disabled";
};
- i2c3: i2c@021a8000 {
+ i2c3: i2c@21a8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
@@ -797,56 +780,50 @@
status = "disabled";
};
- romcp@021ac000 {
- compatible = "fsl,imx6sll-romcp", "syscon";
- reg = <0x021ac000 0x4000>;
- };
-
- mmdc: mmdc@021b0000 {
+ mmdc: memory-controller@21b0000 {
compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc";
reg = <0x021b0000 0x4000>;
+ clocks = <&clks IMX6SLL_CLK_MMDC_P0_IPG>;
};
- rngb: rngb@021b4000 {
- compatible = "fsl,imx6sl-rng", "fsl,imx-rng", "imx-rng";
+ rngb: rng@21b4000 {
+ compatible = "fsl,imx6sll-rngb", "fsl,imx25-rngb";
reg = <0x021b4000 0x4000>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SLL_CLK_DUMMY>;
+ clocks = <&clks IMX6SLL_CLK_DUMMY>;
};
- ocotp: ocotp-ctrl@021bc000 {
+ ocotp: efuse@21bc000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "fsl,imx6sll-ocotp", "syscon";
reg = <0x021bc000 0x4000>;
clocks = <&clks IMX6SLL_CLK_OCOTP>;
- };
- csu: csu@021c0000 {
- compatible = "fsl,imx6sll-csu";
- reg = <0x021c0000 0x4000>;
- interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
+ cpu_speed_grade: speed-grade@10 {
+ reg = <0x10 4>;
+ };
- snvs_gpr: snvs-gpr@0x021c4000 {
- compatible = "fsl, imx6sll-snvs-gpr";
- reg = <0x021c4000 0x10000>;
- };
+ tempmon_calib: calib@38 {
+ reg = <0x38 4>;
+ };
- iomuxc_snvs: iomuxc-snvs@021c8000 {
- compatible = "fsl,imx6sll-iomuxc-snvs";
- reg = <0x021c80000 0x10000>;
+ tempmon_temp_grade: temp-grade@20 {
+ reg = <0x20 4>;
+ };
};
- audmux: audmux@021d8000 {
+ audmux: audmux@21d8000 {
compatible = "fsl,imx6sll-audmux", "fsl,imx31-audmux";
reg = <0x021d8000 0x4000>;
status = "disabled";
};
- uart5: serial@021f4000 {
- compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+ uart5: serial@21f4000 {
+ compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart",
+ "fsl,imx21-uart";
reg = <0x021f4000 0x4000>;
- interrupts =<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
dma-names = "rx", "tx";
clocks = <&clks IMX6SLL_CLK_UART5_IPG>,
diff --git a/arch/arm/dts/imx6sx-sabreauto.dts b/arch/arm/dts/imx6sx-sabreauto.dts
index 9643d1fe0642..83ee97252ff1 100644
--- a/arch/arm/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/dts/imx6sx-sabreauto.dts
@@ -1,10 +1,6 @@
-/*
- * Copyright (C) 2014 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2014 Freescale Semiconductor, Inc.
/dts-v1/;
@@ -14,29 +10,171 @@
model = "Freescale i.MX6 SoloX Sabre Auto Board";
compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx";
- memory {
+ memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x80000000>;
};
- regulators {
- compatible = "simple-bus";
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led>;
+
+ user {
+ label = "debug";
+ gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ vcc_sd3: regulator-vcc-sd3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_vcc_sd3>;
+ regulator-name = "VCC_SD3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_can_wake: regulator-can-wake {
+ compatible = "regulator-fixed";
+ regulator-name = "can-wake";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_can_en: regulator-can-en {
+ compatible = "regulator-fixed";
+ regulator-name = "can-en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_can_wake>;
+ };
+
+ reg_can_stby: regulator-can-stby {
+ compatible = "regulator-fixed";
+ regulator-name = "can-stby";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&max7310_b 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_can_en>;
+ };
+
+ reg_cs42888: cs42888_supply {
+ compatible = "regulator-fixed";
+ regulator-name = "cs42888_supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ sound-cs42888 {
+ compatible = "fsl,imx6-sabreauto-cs42888",
+ "fsl,imx-audio-cs42888";
+ model = "imx-cs42888";
+ audio-cpu = <&esai>;
+ audio-asrc = <&asrc>;
+ audio-codec = <&cs42888>;
+ audio-routing =
+ "Line Out Jack", "AOUT1L",
+ "Line Out Jack", "AOUT1R",
+ "Line Out Jack", "AOUT2L",
+ "Line Out Jack", "AOUT2R",
+ "Line Out Jack", "AOUT3L",
+ "Line Out Jack", "AOUT3R",
+ "Line Out Jack", "AOUT4L",
+ "Line Out Jack", "AOUT4R",
+ "AIN1L", "Line In Jack",
+ "AIN1R", "Line In Jack",
+ "AIN2L", "Line In Jack",
+ "AIN2R", "Line In Jack";
+ };
+
+ sound-spdif {
+ compatible = "fsl,imx-audio-spdif";
+ model = "imx-spdif";
+ spdif-controller = <&spdif>;
+ spdif-in;
+ };
+};
+
+&anaclk2 {
+ clock-frequency = <24576000>;
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6SX_PLL4_BYPASS_SRC>,
+ <&clks IMX6SX_PLL4_BYPASS>,
+ <&clks IMX6SX_CLK_PLL4_POST_DIV>;
+ assigned-clock-parents = <&clks IMX6SX_CLK_LVDS2_IN>,
+ <&clks IMX6SX_PLL4_BYPASS_SRC>;
+ assigned-clock-rates = <0>, <0>, <24576000>;
+};
+
+&esai {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esai>;
+ assigned-clocks = <&clks IMX6SX_CLK_ESAI_SEL>,
+ <&clks IMX6SX_CLK_ESAI_EXTAL>;
+ assigned-clock-parents = <&clks IMX6SX_CLK_PLL4_AUDIO_DIV>;
+ assigned-clock-rates = <0>, <24576000>;
+ status = "okay";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy1>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
#address-cells = <1>;
#size-cells = <0>;
- vcc_sd3: regulator@0 {
- compatible = "regulator-fixed";
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_vcc_sd3>;
- regulator-name = "VCC_SD3";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
- enable-active-high;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
};
};
};
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+ status = "okay";
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_can_stby>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_can_stby>;
+ status = "okay";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
@@ -68,17 +206,325 @@
status = "okay";
};
+&iomuxc {
+ pinctrl_egalax_int: egalax-intgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_RESET_B__GPIO6_IO_22 0x10b0
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1
+ MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1
+ MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b9
+ MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1
+ MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1
+ MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1
+ MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1
+ MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1
+ MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081
+ MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081
+ MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081
+ MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081
+ MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081
+ MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b9
+ MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1
+ MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b1
+ MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b1
+ MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b1
+ MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b1
+ MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081
+ MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081
+ MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081
+ MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081
+ MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081
+ MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081
+ >;
+ };
+
+ pinctrl_esai: esaigrp {
+ fsl,pins = <
+ MX6SX_PAD_CSI_DATA00__ESAI_TX_CLK 0x1b030
+ MX6SX_PAD_CSI_DATA01__ESAI_TX_FS 0x1b030
+ MX6SX_PAD_CSI_HSYNC__ESAI_TX0 0x1b030
+ MX6SX_PAD_CSI_DATA04__ESAI_TX1 0x1b030
+ MX6SX_PAD_CSI_DATA06__ESAI_TX2_RX3 0x1b030
+ MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2 0x1b030
+ MX6SX_PAD_CSI_DATA02__ESAI_RX_CLK 0x1b030
+ MX6SX_PAD_CSI_DATA03__ESAI_RX_FS 0x1b030
+ MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0 0x1b030
+ MX6SX_PAD_CSI_DATA05__ESAI_TX4_RX1 0x1b030
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b020
+ MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b020
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b020
+ MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b020
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1
+ MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1
+ MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_led: ledgrp {
+ fsl,pins = <
+ MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24 0x17059
+ >;
+ };
+
+ pinctrl_spdif: spdifgrp {
+ fsl,pins = <
+ MX6SX_PAD_ENET2_COL__SPDIF_IN 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059
+ MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059
+ MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059
+ MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059
+ MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059
+ MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */
+ MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9
+ MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9
+ MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9
+ MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9
+ MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9
+ MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9
+ MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9
+ MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9
+ MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059
+ MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */
+ MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */
+ >;
+ };
+
+ pinctrl_vcc_sd3: vccsd3grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x30b0
+ >;
+ };
+};
+
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_1>;
+ pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
+
+ cs42888: cs42888@48 {
+ compatible = "cirrus,cs42888";
+ reg = <0x48>;
+ clocks = <&anaclk2 0>;
+ clock-names = "mclk";
+ VA-supply = <®_cs42888>;
+ VD-supply = <®_cs42888>;
+ VLS-supply = <®_cs42888>;
+ VLC-supply = <®_cs42888>;
+ };
+
+ touchscreen@4 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_egalax_int>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ pfuze100: pmic@8 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ max7322: gpio@68 {
+ compatible = "maxim,max7322";
+ reg = <0x68>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
&i2c3 {
- clock-frequency = <100000>;
+ clock-frequency = <100000>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3_2>;
+ pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
max7310_a: gpio@30 {
@@ -96,133 +542,16 @@
};
};
-&qspi1 {
+&spdif {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_qspi1_1>;
+ pinctrl-0 = <&pinctrl_spdif>;
+ assigned-clocks = <&clks IMX6SX_CLK_SPDIF_PODF>;
+ assigned-clock-rates = <24576000>;
status = "okay";
- ddrsmp=<2>;
-
- flash0: n25q256a@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "micron,n25q256a";
- spi-max-frequency = <29000000>;
- reg = <0>;
- };
-
- flash1: n25q256a@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "micron,n25q256a";
- spi-max-frequency = <29000000>;
- reg = <1>;
- };
};
-&iomuxc {
- imx6x-sabreauto {
- pinctrl_i2c2_1: i2c2grp-1 {
- fsl,pins = <
- MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1
- MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1
- >;
- };
-
- pinctrl_i2c3_2: i2c3grp-2 {
- fsl,pins = <
- MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1
- MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1
- >;
- };
-
- pinctrl_qspi1_1: qspi1grp_1 {
- fsl,pins = <
- MX6SX_PAD_QSPI1A_DATA0__QSPI1_A_DATA_0 0x70a1
- MX6SX_PAD_QSPI1A_DATA1__QSPI1_A_DATA_1 0x70a1
- MX6SX_PAD_QSPI1A_DATA2__QSPI1_A_DATA_2 0x70a1
- MX6SX_PAD_QSPI1A_DATA3__QSPI1_A_DATA_3 0x70a1
- MX6SX_PAD_QSPI1A_SCLK__QSPI1_A_SCLK 0x70a1
- MX6SX_PAD_QSPI1A_SS0_B__QSPI1_A_SS0_B 0x70a1
- MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0 0x70a1
- MX6SX_PAD_QSPI1B_DATA1__QSPI1_B_DATA_1 0x70a1
- MX6SX_PAD_QSPI1B_DATA2__QSPI1_B_DATA_2 0x70a1
- MX6SX_PAD_QSPI1B_DATA3__QSPI1_B_DATA_3 0x70a1
- MX6SX_PAD_QSPI1B_SCLK__QSPI1_B_SCLK 0x70a1
- MX6SX_PAD_QSPI1B_SS0_B__QSPI1_B_SS0_B 0x70a1
- >;
- };
-
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
- MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
- >;
- };
-
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <
- MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059
- MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059
- MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059
- MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059
- MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059
- MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059
- MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059
- MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059
- MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059
- MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059
- MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */
- MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */
- >;
- };
-
- pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
- fsl,pins = <
- MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9
- MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9
- MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9
- MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9
- MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9
- MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9
- MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9
- MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9
- MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9
- MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9
- >;
- };
-
- pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
- fsl,pins = <
- MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9
- MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9
- MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9
- MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9
- MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9
- MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9
- MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9
- MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9
- MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9
- MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9
- >;
- };
-
- pinctrl_usdhc4: usdhc4grp {
- fsl,pins = <
- MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059
- MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059
- MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059
- MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059
- MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059
- MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059
- MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */
- MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */
- >;
- };
-
- pinctrl_vcc_sd3: vccsd3grp {
- fsl,pins = <
- MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059
- >;
- };
- };
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
};
diff --git a/arch/arm/dts/imx6sx-sdb.dts b/arch/arm/dts/imx6sx-sdb.dts
index 5a63ca615722..969cfe920d25 100644
--- a/arch/arm/dts/imx6sx-sdb.dts
+++ b/arch/arm/dts/imx6sx-sdb.dts
@@ -108,23 +108,23 @@
pinctrl-0 = <&pinctrl_qspi2>;
status = "okay";
- flash0: n25q256a@0 {
+ flash0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
spi-rx-bus-width = <4>;
- spi-tx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
reg = <0>;
};
- flash1: n25q256a@2 {
+ flash1: flash@2 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
spi-rx-bus-width = <4>;
- spi-tx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
reg = <2>;
};
};
diff --git a/arch/arm/dts/imx6sx-sdb.dtsi b/arch/arm/dts/imx6sx-sdb.dtsi
index f6972deb5e39..c6e85e4a0883 100644
--- a/arch/arm/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/dts/imx6sx-sdb.dtsi
@@ -153,6 +153,8 @@
sound {
compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hp>;
model = "wm8962-audio";
ssi-controller = <&ssi2>;
audio-codec = <&codec>;
@@ -165,6 +167,7 @@
"IN3R", "AMIC";
mux-int-port = <2>;
mux-ext-port = <6>;
+ hp-det-gpio = <&gpio1 17 GPIO_ACTIVE_LOW>;
};
panel {
@@ -179,6 +182,15 @@
};
};
};
+
+ sound-spdif {
+ compatible = "fsl,imx-audio-spdif",
+ "fsl,imx6sx-sdb-spdif";
+ model = "imx-spdif";
+ spdif-controller = <&spdif>;
+ spdif-out;
+ };
+
};
&audmux {
@@ -194,6 +206,7 @@
phy-mode = "rgmii-id";
phy-handle = <ðphy1>;
phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+ fsl,magic-packet;
status = "okay";
mdio {
@@ -213,8 +226,9 @@
&fec2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet2>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <ðphy2>;
+ fsl,magic-packet;
status = "okay";
};
@@ -281,6 +295,7 @@
};
&pwm3 {
+ #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "okay";
@@ -296,6 +311,14 @@
status = "disabled";
};
+&spdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spdif>;
+ assigned-clocks = <&clks IMX6SX_CLK_SPDIF_PODF>;
+ assigned-clock-rates = <24576000>;
+ status = "okay";
+};
+
&ssi2 {
status = "okay";
};
@@ -450,6 +473,12 @@
>;
};
+ pinctrl_hp: hpgrp {
+ fsl,pins = <
+ MX6SX_PAD_CSI_DATA03__GPIO1_IO_17 0x17059
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1
@@ -505,6 +534,13 @@
>;
};
+ pinctrl_mqs: mqsgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD2_CLK__MQS_RIGHT 0x120b0
+ MX6SX_PAD_SD2_CMD__MQS_LEFT 0x120b0
+ >;
+ };
+
pinctrl_pcie: pciegrp {
fsl,pins = <
MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x10b0
@@ -562,19 +598,25 @@
>;
};
+ pinctrl_spdif: spdifgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_DATA4__SPDIF_OUT 0x1b0b0
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
- MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
- MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1
>;
};
pinctrl_uart5: uart5grp {
fsl,pins = <
- MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1
- MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1
- MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x1b0b1
- MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x1b0b1
+ MX6SX_PAD_KEY_ROW3__UART5_DCE_RX 0x1b0b1
+ MX6SX_PAD_KEY_COL3__UART5_DCE_TX 0x1b0b1
+ MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS 0x1b0b1
+ MX6SX_PAD_KEY_COL2__UART5_DCE_RTS 0x1b0b1
>;
};
diff --git a/arch/arm/dts/imx6sx-softing-vining-2000.dts b/arch/arm/dts/imx6sx-softing-vining-2000.dts
index 78dd5755a379..b9a1401e6c6d 100644
--- a/arch/arm/dts/imx6sx-softing-vining-2000.dts
+++ b/arch/arm/dts/imx6sx-softing-vining-2000.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2016 Christoph Fritz <chf.fritz@googlemail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
/dts-v1/;
@@ -16,11 +13,6 @@
model = "Softing VIN|ING 2000";
compatible = "samtec,imx6sx-vining-2000", "fsl,imx6sx";
- aliases {
- mmc0 = &usdhc4;
- mmc1 = &usdhc2;
- };
-
chosen {
stdout-path = &uart1;
};
@@ -48,22 +40,22 @@
regulator-max-microvolt = <3300000>;
};
- pwmleds {
+ led-controller {
compatible = "pwm-leds";
- red {
+ led-1 {
label = "red";
max-brightness = <255>;
pwms = <&pwm6 0 50000>;
};
- green {
+ led-2 {
label = "green";
max-brightness = <255>;
pwms = <&pwm2 0 50000>;
};
- blue {
+ led-3 {
label = "blue";
max-brightness = <255>;
pwms = <&pwm1 0 50000>;
@@ -101,7 +93,7 @@
&ecspi4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi4>;
- cs-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
status = "okay";
};
@@ -270,17 +262,6 @@
status = "okay";
};
-®_pcie {
- regulator-always-on;
-};
-
-&pcie {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pcie>;
- reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpios>;
@@ -409,15 +390,15 @@
pinctrl_uart1: uart1grp {
fsl,pins = <
- MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
- MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
- MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1
- MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX 0x1b0b1
>;
};
@@ -515,19 +496,30 @@
};
};
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+ reset-gpio-active-high;
+ status = "okay";
+};
+
&pwm1 {
+ #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
};
&pwm2 {
+ #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm2>;
status = "okay";
};
&pwm6 {
+ #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm6>;
status = "okay";
diff --git a/arch/arm/dts/imx6sx-udoo-neo.dtsi b/arch/arm/dts/imx6sx-udoo-neo.dtsi
index ee645655090d..35861bbea94e 100644
--- a/arch/arm/dts/imx6sx-udoo-neo.dtsi
+++ b/arch/arm/dts/imx6sx-udoo-neo.dtsi
@@ -183,6 +183,27 @@
status = "okay";
};
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ hdmi-transmitter@70 {
+ compatible = "nxp,tda998x";
+ reg = <0x70>;
+ interrupts-extended = <&gpio3 27 IRQ_TYPE_LEVEL_LOW>;
+
+ ports {
+ port {
+ hdmi: endpoint {
+ remote-endpoint = <&lcdc>;
+ };
+ };
+ };
+ };
+};
+
&i2c4 { /* Onboard Motion sensors */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
@@ -190,6 +211,18 @@
status = "disabled";
};
+&lcdif1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd>;
+ status = "okay";
+
+ port {
+ lcdc: endpoint {
+ remote-endpoint = <&hdmi>;
+ };
+ };
+};
+
&iomuxc {
pinctrl_bt_reg: btreggrp {
fsl,pins =
@@ -227,12 +260,53 @@
<MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1>;
};
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins =
+ <MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1>,
+ <MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1>;
+ };
+
pinctrl_i2c4: i2c4grp {
fsl,pins =
<MX6SX_PAD_USB_H_DATA__I2C4_SDA 0x4001b8b1>,
<MX6SX_PAD_USB_H_STROBE__I2C4_SCL 0x4001b8b1>;
};
+ pinctrl_lcd: lcdgrp {
+ fsl,pins = <
+ MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
+ MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0
+ MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
+ MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
+ MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
+ MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
+ >;
+ };
+
+
pinctrl_uart1: uart1grp {
fsl,pins =
<MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1>,
diff --git a/arch/arm/dts/imx6sx.dtsi b/arch/arm/dts/imx6sx.dtsi
index 8d2d396ad138..fc6334336b3d 100644
--- a/arch/arm/dts/imx6sx.dtsi
+++ b/arch/arm/dts/imx6sx.dtsi
@@ -49,6 +49,9 @@
spi2 = &ecspi3;
spi3 = &ecspi4;
spi4 = &ecspi5;
+ usb0 = &usbotg1;
+ usb1 = &usbotg2;
+ usb2 = &usbh;
usbphy0 = &usbphy1;
usbphy1 = &usbphy2;
};
@@ -87,6 +90,8 @@
"pll1_sw", "pll1_sys";
arm-supply = <®_arm>;
soc-supply = <®_soc>;
+ nvmem-cells = <&cpu_speed_grade>;
+ nvmem-cell-names = "speed_grade";
};
};
@@ -132,14 +137,10 @@
clock-output-names = "anaclk2";
};
- tempmon: tempmon {
- compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
- interrupt-parent = <&gpc>;
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- fsl,tempmon = <&anatop>;
- nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
- nvmem-cell-names = "calib", "temp_grade";
- clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+ mqs: mqs {
+ compatible = "fsl,imx6sx-mqs";
+ gpr = <&gpr>;
+ status = "disabled";
};
pmu {
@@ -181,7 +182,7 @@
interrupt-parent = <&intc>;
};
- L2: l2-cache@a02000 {
+ L2: cache-controller@a02000 {
compatible = "arm,pl310-cache";
reg = <0x00a02000 0x1000>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -215,7 +216,7 @@
clocks = <&clks IMX6SX_CLK_APBH_DMA>;
};
- gpmi: gpmi-nand@1806000{
+ gpmi: nand-controller@1806000{
compatible = "fsl,imx6sx-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
@@ -333,6 +334,7 @@
};
esai: esai@2024000 {
+ compatible = "fsl,imx6sx-esai", "fsl,imx35-esai";
reg = <0x02024000 0x4000>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_ESAI_IPG>,
@@ -342,6 +344,9 @@
<&clks IMX6SX_CLK_SPBA>;
clock-names = "core", "mem", "extal",
"fsys", "spba";
+ dmas = <&sdma 23 21 0>,
+ <&sdma 24 21 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -388,18 +393,28 @@
};
asrc: asrc@2034000 {
+ compatible = "fsl,imx6sx-asrc", "fsl,imx53-asrc";
reg = <0x02034000 0x4000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SX_CLK_ASRC_MEM>,
- <&clks IMX6SX_CLK_ASRC_IPG>,
- <&clks IMX6SX_CLK_SPDIF>,
- <&clks IMX6SX_CLK_SPBA>;
- clock-names = "mem", "ipg", "asrck", "spba";
- dmas = <&sdma 17 20 1>, <&sdma 18 20 1>,
- <&sdma 19 20 1>, <&sdma 20 20 1>,
- <&sdma 21 20 1>, <&sdma 22 20 1>;
+ clocks = <&clks IMX6SX_CLK_ASRC_IPG>,
+ <&clks IMX6SX_CLK_ASRC_MEM>, <&clks 0>,
+ <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+ <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+ <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+ <&clks IMX6SX_CLK_SPDIF>, <&clks 0>, <&clks 0>,
+ <&clks IMX6SX_CLK_SPBA>;
+ clock-names = "mem", "ipg", "asrck_0",
+ "asrck_1", "asrck_2", "asrck_3", "asrck_4",
+ "asrck_5", "asrck_6", "asrck_7", "asrck_8",
+ "asrck_9", "asrck_a", "asrck_b", "asrck_c",
+ "asrck_d", "asrck_e", "asrck_f", "spba";
+ dmas = <&sdma 17 23 1>, <&sdma 18 23 1>,
+ <&sdma 19 23 1>, <&sdma 20 23 1>,
+ <&sdma 21 23 1>, <&sdma 22 23 1>;
dma-names = "rxa", "rxb", "rxc",
"txa", "txb", "txc";
+ fsl,asrc-rate = <48000>;
+ fsl,asrc-width = <16>;
status = "okay";
};
};
@@ -411,7 +426,7 @@
clocks = <&clks IMX6SX_CLK_PWM1>,
<&clks IMX6SX_CLK_PWM1>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
};
pwm2: pwm@2084000 {
@@ -421,7 +436,7 @@
clocks = <&clks IMX6SX_CLK_PWM2>,
<&clks IMX6SX_CLK_PWM2>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
};
pwm3: pwm@2088000 {
@@ -431,7 +446,7 @@
clocks = <&clks IMX6SX_CLK_PWM3>,
<&clks IMX6SX_CLK_PWM3>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
};
pwm4: pwm@208c000 {
@@ -441,7 +456,7 @@
clocks = <&clks IMX6SX_CLK_PWM4>,
<&clks IMX6SX_CLK_PWM4>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
};
flexcan1: can@2090000 {
@@ -451,7 +466,7 @@
clocks = <&clks IMX6SX_CLK_CAN1_IPG>,
<&clks IMX6SX_CLK_CAN1_SERIAL>;
clock-names = "ipg", "per";
- fsl,stop-mode = <&gpr 0x10 1 0x10 17>;
+ fsl,stop-mode = <&gpr 0x10 1>;
status = "disabled";
};
@@ -462,11 +477,11 @@
clocks = <&clks IMX6SX_CLK_CAN2_IPG>,
<&clks IMX6SX_CLK_CAN2_SERIAL>;
clock-names = "ipg", "per";
- fsl,stop-mode = <&gpr 0x10 2 0x10 18>;
+ fsl,stop-mode = <&gpr 0x10 2>;
status = "disabled";
};
- gpt: gpt@2098000 {
+ gpt: timer@2098000 {
compatible = "fsl,imx6sx-gpt", "fsl,imx6dl-gpt";
reg = <0x02098000 0x4000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -559,7 +574,7 @@
gpio-ranges = <&iomuxc 0 148 10>, <&iomuxc 10 169 2>;
};
- kpp: kpp@20b8000 {
+ kpp: keypad@20b8000 {
compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp";
reg = <0x020b8000 0x4000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -567,14 +582,14 @@
status = "disabled";
};
- wdog1: wdog@20bc000 {
+ wdog1: watchdog@20bc000 {
compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_IPG>;
};
- wdog2: wdog@20c0000 {
+ wdog2: watchdog@20c0000 {
compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
@@ -582,7 +597,7 @@
status = "disabled";
};
- clks: ccm@20c4000 {
+ clks: clock-controller@20c4000 {
compatible = "fsl,imx6sx-ccm";
reg = <0x020c4000 0x4000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
@@ -594,7 +609,7 @@
anatop: anatop@20c8000 {
compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop",
- "syscon", "simple-bus";
+ "syscon", "simple-mfd";
reg = <0x020c8000 0x1000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
@@ -694,6 +709,16 @@
anatop-min-voltage = <725000>;
anatop-max-voltage = <1450000>;
};
+
+ tempmon: tempmon {
+ compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
+ interrupt-parent = <&gpc>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,tempmon = <&anatop>;
+ nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+ nvmem-cell-names = "calib", "temp_grade";
+ clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+ };
};
usbphy1: usbphy@20c9000 {
@@ -752,7 +777,7 @@
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
};
- src: src@20d8000 {
+ src: reset-controller@20d8000 {
compatible = "fsl,imx6sx-src", "fsl,imx51-src";
reg = <0x020d8000 0x4000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
@@ -806,7 +831,7 @@
};
};
- iomuxc: iomuxc@20e0000 {
+ iomuxc: pinctrl@20e0000 {
compatible = "fsl,imx6sx-iomuxc";
reg = <0x020e0000 0x4000>;
};
@@ -837,7 +862,7 @@
reg = <0x02100000 0x100000>;
ranges;
- crypto: caam@2100000 {
+ crypto: crypto@2100000 {
compatible = "fsl,sec-v4.0";
#address-cells = <1>;
#size-cells = <1>;
@@ -850,13 +875,13 @@
<&clks IMX6SX_CLK_EIM_SLOW>;
clock-names = "mem", "aclk", "ipg", "emi_slow";
- sec_jr0: jr0@1000 {
+ sec_jr0: jr@1000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x1000 0x1000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
};
- sec_jr1: jr1@2000 {
+ sec_jr1: jr@2000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x2000 0x1000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
@@ -928,6 +953,7 @@
"enet_clk_ref", "enet_out";
fsl,num-tx-queues = <3>;
fsl,num-rx-queues = <3>;
+ fsl,stop-mode = <&gpr 0x10 3>;
status = "disabled";
};
@@ -940,7 +966,7 @@
status = "disabled";
};
- usdhc1: usdhc@2190000 {
+ usdhc1: mmc@2190000 {
compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
reg = <0x02190000 0x4000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -952,7 +978,7 @@
status = "disabled";
};
- usdhc2: usdhc@2194000 {
+ usdhc2: mmc@2194000 {
compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
reg = <0x02194000 0x4000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -964,7 +990,7 @@
status = "disabled";
};
- usdhc3: usdhc@2198000 {
+ usdhc3: mmc@2198000 {
compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
reg = <0x02198000 0x4000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
@@ -976,7 +1002,7 @@
status = "disabled";
};
- usdhc4: usdhc@219c000 {
+ usdhc4: mmc@219c000 {
compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
reg = <0x0219c000 0x4000>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -1037,6 +1063,7 @@
<&clks IMX6SX_CLK_ENET_PTP>;
clock-names = "ipg", "ahb", "ptp",
"enet_clk_ref", "enet_out";
+ fsl,stop-mode = <&gpr 0x10 4>;
status = "disabled";
};
@@ -1051,13 +1078,17 @@
status = "disabled";
};
- ocotp: ocotp@21bc000 {
+ ocotp: efuse@21bc000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,imx6sx-ocotp", "syscon";
reg = <0x021bc000 0x4000>;
clocks = <&clks IMX6SX_CLK_OCOTP>;
+ cpu_speed_grade: speed-grade@10 {
+ reg = <0x10 4>;
+ };
+
tempmon_calib: calib@38 {
reg = <0x38 4>;
};
@@ -1289,7 +1320,7 @@
status = "disabled";
};
- wdog3: wdog@2288000 {
+ wdog3: watchdog@2288000 {
compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
reg = <0x02288000 0x4000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
@@ -1329,7 +1360,7 @@
clocks = <&clks IMX6SX_CLK_PWM5>,
<&clks IMX6SX_CLK_PWM5>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
};
pwm6: pwm@22a8000 {
@@ -1339,7 +1370,7 @@
clocks = <&clks IMX6SX_CLK_PWM6>,
<&clks IMX6SX_CLK_PWM6>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
};
pwm7: pwm@22ac000 {
@@ -1349,7 +1380,7 @@
clocks = <&clks IMX6SX_CLK_PWM7>,
<&clks IMX6SX_CLK_PWM7>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
};
pwm8: pwm@22b0000 {
@@ -1359,20 +1390,20 @@
clocks = <&clks IMX6SX_CLK_PWM8>,
<&clks IMX6SX_CLK_PWM8>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
};
};
pcie: pcie@8ffc000 {
- compatible = "fsl,imx6sx-pcie", "snps,dw-pcie";
+ compatible = "fsl,imx6sx-pcie";
reg = <0x08ffc000 0x04000>, <0x08f00000 0x80000>;
reg-names = "dbi", "config";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
bus-range = <0x00 0xff>;
- ranges = <0x81000000 0 0 0x08f80000 0 0x00010000 /* downstream I/O */
- 0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */
+ ranges = <0x81000000 0 0 0x08f80000 0 0x00010000>, /* downstream I/O */
+ <0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */
num-lanes = <1>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
diff --git a/arch/arm/dts/imx6ul-14x14-evk.dtsi b/arch/arm/dts/imx6ul-14x14-evk.dtsi
index 463d7ca124bd..1a18c41ce385 100644
--- a/arch/arm/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/dts/imx6ul-14x14-evk.dtsi
@@ -3,10 +3,6 @@
// Copyright (C) 2015 Freescale Semiconductor, Inc.
/ {
- aliases {
- spi5 = &{/spi4};
- };
-
chosen {
stdout-path = &uart1;
};
@@ -34,6 +30,28 @@
enable-active-high;
};
+ reg_peri_3v3: regulator-peri-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_peri_3v3>;
+ regulator-name = "VPERI_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 2 GPIO_ACTIVE_LOW>;
+ /*
+ * If you want to want to make this dynamic please
+ * check schematics and test all affected peripherals:
+ *
+ * - sensors
+ * - ethernet phy
+ * - can
+ * - bluetooth
+ * - wm8960 audio codec
+ * - ov5640 camera
+ */
+ regulator-always-on;
+ };
+
reg_can_3v3: regulator-can-3v3 {
compatible = "regulator-fixed";
regulator-name = "can-3v3";
@@ -42,6 +60,28 @@
gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
};
+ sound-wm8960 {
+ compatible = "fsl,imx-audio-wm8960";
+ model = "wm8960-audio";
+ audio-cpu = <&sai2>;
+ audio-codec = <&codec>;
+ audio-asrc = <&asrc>;
+ hp-det-gpio = <&gpio5 4 0>;
+ audio-routing =
+ "Headphone Jack", "HP_L",
+ "Headphone Jack", "HP_R",
+ "Ext Spk", "SPK_LP",
+ "Ext Spk", "SPK_LN",
+ "Ext Spk", "SPK_RP",
+ "Ext Spk", "SPK_RN",
+ "LINPUT2", "Mic Jack",
+ "LINPUT3", "Mic Jack",
+ "RINPUT1", "AMIC",
+ "RINPUT2", "AMIC",
+ "Mic Jack", "MICB",
+ "AMIC", "MICB";
+ };
+
spi4 {
compatible = "spi-gpio";
pinctrl-names = "default";
@@ -49,7 +89,7 @@
status = "okay";
gpio-sck = <&gpio5 11 0>;
gpio-mosi = <&gpio5 10 0>;
- cs-gpios = <&gpio5 7 0>;
+ cs-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
num-chipselects = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -61,6 +101,7 @@
reg = <0>;
registers-number = <1>;
spi-max-frequency = <100000>;
+ enable-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
};
};
@@ -82,7 +123,7 @@
};
&i2c2 {
- clock_frequency = <100000>;
+ clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
@@ -92,6 +133,45 @@
compatible = "wlf,wm8960";
reg = <0x1a>;
wlf,shared-lrclk;
+ wlf,hp-cfg = <3 2 3>;
+ wlf,gpio-cfg = <1 3>;
+ clocks = <&clks IMX6UL_CLK_SAI2>;
+ clock-names = "mclk";
+ };
+
+ camera@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_camera_clock>;
+ clocks = <&clks IMX6UL_CLK_CSI>;
+ clock-names = "xclk";
+ powerdown-gpios = <&gpio_spi 6 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio_spi 5 GPIO_ACTIVE_LOW>;
+
+ port {
+ ov5640_to_parallel: endpoint {
+ remote-endpoint = <¶llel_from_ov5640>;
+ bus-width = <8>;
+ data-shift = <2>; /* lines 9:2 are used */
+ hsync-active = <0>;
+ vsync-active = <0>;
+ pclk-sample = <1>;
+ };
+ };
+ };
+};
+
+&csi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_csi1>;
+ status = "okay";
+
+ port {
+ parallel_from_ov5640: endpoint {
+ remote-endpoint = <&ov5640_to_parallel>;
+ bus-type = <5>; /* Parallel bus */
+ };
};
};
@@ -100,6 +180,7 @@
pinctrl-0 = <&pinctrl_enet1>;
phy-mode = "rmii";
phy-handle = <ðphy0>;
+ phy-supply = <®_peri_3v3>;
status = "okay";
};
@@ -108,6 +189,7 @@
pinctrl-0 = <&pinctrl_enet2>;
phy-mode = "rmii";
phy-handle = <ðphy1>;
+ phy-supply = <®_peri_3v3>;
status = "okay";
mdio {
@@ -115,13 +197,16 @@
#size-cells = <0>;
ethphy0: ethernet-phy@2 {
+ compatible = "ethernet-phy-id0022.1560";
reg = <2>;
micrel,led-mode = <1>;
clocks = <&clks IMX6UL_CLK_ENET_REF>;
clock-names = "rmii-ref";
+
};
ethphy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-id0022.1560";
reg = <1>;
micrel,led-mode = <1>;
clocks = <&clks IMX6UL_CLK_ENET2_REF>;
@@ -144,18 +229,33 @@
status = "okay";
};
+&gpio_spi {
+ eth0-phy-hog {
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "eth0-phy";
+ };
+
+ eth1-phy-hog {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "eth1-phy";
+ };
+};
+
&i2c1 {
clock-frequency = <100000>;
- pinctrl-names = "default", "gpio";
+ pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
- pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
status = "okay";
- mag3110@e {
+ magnetometer@e {
compatible = "fsl,mag3110";
reg = <0x0e>;
+ vdd-supply = <®_peri_3v3>;
+ vddio-supply = <®_peri_3v3>;
};
};
@@ -175,6 +275,7 @@
};
&pwm1 {
+ #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
@@ -185,13 +286,13 @@
pinctrl-0 = <&pinctrl_qspi>;
status = "okay";
- flash0: n25q256a@0 {
+ flash0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "micron,n25q256a";
+ compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
spi-rx-bus-width = <4>;
- spi-tx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
reg = <0>;
};
};
@@ -211,6 +312,10 @@
status = "okay";
};
+&snvs_pwrkey {
+ status = "okay";
+};
+
&tsc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc>;
@@ -235,6 +340,8 @@
&usbotg1 {
dr_mode = "otg";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1>;
status = "okay";
};
@@ -283,9 +390,14 @@
&iomuxc {
pinctrl-names = "default";
- pinctrl_csi1: csi1grp {
+ pinctrl_camera_clock: cameraclockgrp {
fsl,pins = <
MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
+ >;
+ };
+
+ pinctrl_csi1: csi1grp {
+ fsl,pins = <
MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x1b088
@@ -349,13 +461,6 @@
>;
};
- pinctrl_i2c1_gpio: i2c1grp_gpio {
- fsl,pins = <
- MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x1b8b0
- MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x1b8b0
- >;
- };
-
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
@@ -425,6 +530,12 @@
>;
};
+ pinctrl_peri_3v3: peri3v3grp {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0
+ >;
+ };
+
pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0
@@ -476,6 +587,12 @@
>;
};
+ pinctrl_usb_otg1: usbotg1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059
+ >;
+ };
+
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
diff --git a/arch/arm/dts/imx6ul-geam.dts b/arch/arm/dts/imx6ul-geam.dts
index 07c21cb0a2de..a0097da03f38 100644
--- a/arch/arm/dts/imx6ul-geam.dts
+++ b/arch/arm/dts/imx6ul-geam.dts
@@ -1,43 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@@ -47,22 +11,129 @@
#include "imx6ul.dtsi"
/ {
- model = "Engicam GEAM6UL";
+ model = "Engicam GEAM6UL Starter Kit";
compatible = "engicam,imx6ul-geam", "fsl,imx6ul";
- memory {
+ memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x08000000>;
};
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm8 0 100000>;
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100>;
+ default-brightness-level = <100>;
+ };
+
chosen {
stdout-path = &uart1;
};
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "imx6ul-geam-sgtl5000";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink_master>;
+ simple-audio-card,frame-master = <&dailink_master>;
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Line", "Line In",
+ "Line", "Line Out",
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ };
+
+ dailink_master: simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ clocks = <&clks IMX6UL_CLK_SAI2>;
+ };
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_3p3v>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_3p3v>;
+ status = "okay";
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1>;
phy-mode = "rmii";
+ phy-handle = <ðphy0>;
+ status = "okay";
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy1>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+ };
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ nand-on-flash-bbt;
status = "okay";
};
@@ -71,21 +142,105 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+
+ sgtl5000: codec@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ #sound-dai-cells = <0>;
+ clocks = <&clks IMX6UL_CLK_OSC>;
+ clock-names = "mclk";
+ VDDA-supply = <®_3p3v>;
+ VDDIO-supply = <®_3p3v>;
+ VDDD-supply = <®_1p8v>;
+ };
};
&i2c2 {
- clock_frequency = <100000>;
+ clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
};
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat
+ &pinctrl_lcdif_ctrl>;
+ display = <&display0>;
+ status = "okay";
+
+ display0: display0 {
+ bits-per-pixel = <16>;
+ bus-width = <18>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <28000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <30>;
+ hback-porch = <30>;
+ hsync-len = <64>;
+ vback-porch = <5>;
+ vfront-porch = <5>;
+ vsync-len = <20>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&pwm8 {
+ #pwm-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm8>;
+ status = "okay";
+};
+
+&tsc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tsc>;
+ xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+};
+
+&sai2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
+ status = "okay";
+};
+
+&tsc {
+ measure-delay-time = <0x1ffff>;
+ pre-charge-time = <0x1fff>;
+ status = "okay";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ status = "okay";
+};
+
&usdhc1 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
@@ -100,8 +255,6 @@
&iomuxc {
pinctrl_enet1: enet1grp {
fsl,pins = <
- MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
- MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
@@ -112,6 +265,55 @@
>;
};
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
+ MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
+ MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x1b0b0 /* ENET_nRST */
+ MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
+ MX6UL_PAD_GPIO1_IO05__ENET2_REF_CLK2 0x4001b031
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020
+ MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020
+ MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1
+ MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1
+ MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1
+ MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
+ MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1
+ MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1
+ MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1
+ MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1
+ MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1
+ MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1
+ MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1
+ MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1
+ MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1
+ MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1
+ MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
@@ -126,6 +328,63 @@
>;
};
+ pinctrl_lcdif_ctrl: lcdifctrlgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
+ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
+ MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
+ MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
+ >;
+ };
+
+ pinctrl_lcdif_dat: lcdifdatgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
+ MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
+ MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
+ MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
+ MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
+ MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
+ MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
+ MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
+ MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
+ MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
+ MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
+ MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
+ MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
+ MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
+ MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
+ MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
+ MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
+ MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
+ >;
+ };
+
+ pinctrl_pwm8: pwm8grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_tsc: tscgrp {
+ fsl,pin = <
+ MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
+ MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
+ MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
+ MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0
+ >;
+ };
+
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x130b0
+ MX6UL_PAD_JTAG_TMS__CCM_CLKO1 0x4001b031
+ MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088
+ MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088
+ MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x120b0
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
@@ -133,6 +392,15 @@
>;
};
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
+ MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x1b0b1
+ MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x1b0b1
+ >;
+ };
+
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
@@ -165,4 +433,15 @@
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
>;
};
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x17070
+ MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x10070
+ MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17070
+ MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17070
+ MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17070
+ MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17070
+ >;
+ };
};
diff --git a/arch/arm/dts/imx6ul-isiot-emmc.dts b/arch/arm/dts/imx6ul-isiot-emmc.dts
index 50ce2d798e6f..1df3e376ae2c 100644
--- a/arch/arm/dts/imx6ul-isiot-emmc.dts
+++ b/arch/arm/dts/imx6ul-isiot-emmc.dts
@@ -1,56 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
-#include "imx6ul.dtsi"
#include "imx6ul-isiot.dtsi"
/ {
- model = "Engicam Is.IoT MX6UL eMMC Starterkit";
+ model = "Engicam Is.IoT MX6UL eMMC Starter kit";
compatible = "engicam,imx6ul-isiot", "fsl,imx6ul";
};
&usdhc2 {
- u-boot,dm-spl;
status = "okay";
};
diff --git a/arch/arm/dts/imx6ul-isiot-nand.dts b/arch/arm/dts/imx6ul-isiot-nand.dts
index ffdaf34efb4b..8c26d4d1a7bf 100644
--- a/arch/arm/dts/imx6ul-isiot-nand.dts
+++ b/arch/arm/dts/imx6ul-isiot-nand.dts
@@ -1,51 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
-#include "imx6ul.dtsi"
#include "imx6ul-isiot.dtsi"
/ {
- model = "Engicam Is.IoT MX6UL NAND Starterkit";
+ model = "Engicam Is.IoT MX6UL NAND Starter kit";
compatible = "engicam,imx6ul-isiot", "fsl,imx6ul";
};
+
+&gpmi {
+ status = "okay";
+};
diff --git a/arch/arm/dts/imx6ul-isiot.dtsi b/arch/arm/dts/imx6ul-isiot.dtsi
index 4ed7313683d9..14fc4828ba4e 100644
--- a/arch/arm/dts/imx6ul-isiot.dtsi
+++ b/arch/arm/dts/imx6ul-isiot.dtsi
@@ -1,63 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include "imx6ul.dtsi"
/ {
- memory {
+ memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x20000000>;
};
chosen {
stdout-path = &uart1;
};
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm8 0 100000>;
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100>;
+ default-brightness-level = <100>;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "imx6ul-isiot-sgtl5000";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink_master>;
+ simple-audio-card,frame-master = <&dailink_master>;
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Line", "Line In",
+ "Line", "Line Out",
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ };
+
+ dailink_master: simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ clocks = <&clks IMX6UL_CLK_SAI2>;
+ };
+ };
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1>;
phy-mode = "rmii";
+ phy-handle = <ðphy0>;
status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+ };
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ nand-on-flash-bbt;
+ status = "disabled";
};
&i2c1 {
@@ -65,15 +110,95 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+
+ sgtl5000: codec@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ #sound-dai-cells = <0>;
+ clocks = <&clks IMX6UL_CLK_OSC>;
+ clock-names = "mclk";
+ VDDA-supply = <®_3p3v>;
+ VDDIO-supply = <®_3p3v>;
+ VDDD-supply = <®_1p8v>;
+ };
+
+ stmpe811: gpio-expander@44 {
+ compatible = "st,stmpe811";
+ reg = <0x44>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_stmpe>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ stmpe: touchscreen {
+ compatible = "st,stmpe-ts";
+ st,sample-time = <4>;
+ st,mod-12b = <1>;
+ st,ref-sel = <0>;
+ st,adc-freq = <1>;
+ st,ave-ctrl = <1>;
+ st,touch-det-delay = <2>;
+ st,settling = <2>;
+ st,fraction-z = <7>;
+ st,i-drive = <1>;
+ };
+ };
};
&i2c2 {
- clock_frequency = <100000>;
+ clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
};
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat
+ &pinctrl_lcdif_ctrl>;
+ display = <&display0>;
+ status = "okay";
+
+ display0: display0 {
+ bits-per-pixel = <16>;
+ bus-width = <18>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <28000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <30>;
+ hback-porch = <30>;
+ hsync-len = <64>;
+ vback-porch = <5>;
+ vfront-porch = <5>;
+ vsync-len = <20>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&pwm8 {
+ #pwm-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm8>;
+ status = "okay";
+};
+
+&sai2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
+ status = "okay";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
@@ -81,8 +206,10 @@
};
&usdhc1 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
bus-width = <4>;
no-1-8-v;
@@ -101,16 +228,36 @@
&iomuxc {
pinctrl_enet1: enet1grp {
fsl,pins = <
- MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO 0x1b0b0
- MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC 0x1b0b0
- MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
- MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
- MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
- MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
- MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
- MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
- MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
- MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC 0x1b0b0
+ MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
+ MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1
+ MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1
+ MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1
+ MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
+ MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1
+ MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1
+ MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1
+ MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1
+ MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1
+ MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1
+ MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1
+ MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1
+ MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1
+ MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1
+ MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1
>;
};
@@ -122,9 +269,63 @@
};
pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
- MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b0
+ MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x4001b8b0
+ >;
+ };
+
+ pinctrl_lcdif_ctrl: lcdifctrlgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
+ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
+ MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
+ MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
+ >;
+ };
+
+ pinctrl_lcdif_dat: lcdifdatgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
+ MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
+ MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
+ MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
+ MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
+ MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
+ MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
+ MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
+ MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
+ MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
+ MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
+ MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
+ MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
+ MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
+ MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
+ MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
+ MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
+ MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
+ >;
+ };
+
+ pinctrl_pwm8: pwm8grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x130b0
+ MX6UL_PAD_JTAG_TMS__CCM_CLKO1 0x4001b031
+ MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088
+ MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088
+ MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x120b0
+ >;
+ };
+
+ pinctrl_stmpe: stmpegrp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b0
>;
};
@@ -146,8 +347,29 @@
>;
};
+ pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+ >;
+ };
+
pinctrl_usdhc2: usdhc2grp {
- u-boot,dm-spl;
fsl,pins = <
MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17070
MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x10070
diff --git a/arch/arm/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/dts/imx6ul-kontron-n6x1x-s.dtsi
index 4682a79f5b23..770f59b23102 100644
--- a/arch/arm/dts/imx6ul-kontron-n6x1x-s.dtsi
+++ b/arch/arm/dts/imx6ul-kontron-n6x1x-s.dtsi
@@ -84,7 +84,7 @@
};
&ecspi1 {
- cs-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
@@ -153,6 +153,7 @@
};
&pwm8 {
+ #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm8>;
status = "okay";
@@ -214,7 +215,6 @@
wakeup-source;
vmmc-supply = <®_3v3>;
voltage-ranges = <3300 3300>;
- bus-width = <4>;
no-1-8-v;
status = "okay";
};
@@ -229,18 +229,10 @@
wakeup-source;
vmmc-supply = <®_3v3>;
voltage-ranges = <3300 3300>;
- bus-width = <4>;
no-1-8-v;
status = "okay";
};
-&wdog1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_wdog>;
- fsl,ext-reset-output;
- status = "okay";
-};
-
&iomuxc {
pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>;
@@ -411,10 +403,4 @@
MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9
>;
};
-
- pinctrl_wdog: wdoggrp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x30b0
- >;
- };
};
diff --git a/arch/arm/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/dts/imx6ul-kontron-n6x1x-som-common.dtsi
index e9ec6b78919d..09a83dbdf651 100644
--- a/arch/arm/dts/imx6ul-kontron-n6x1x-som-common.dtsi
+++ b/arch/arm/dts/imx6ul-kontron-n6x1x-som-common.dtsi
@@ -11,20 +11,15 @@
chosen {
stdout-path = &uart4;
};
-
- memory@80000000 {
- reg = <0x80000000 0x10000000>;
- device_type = "memory";
- };
};
&ecspi2 {
- cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
status = "okay";
- spi-flash@0 {
+ flash@0 {
compatible = "mxicy,mx25v8035f", "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
@@ -60,16 +55,13 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_qspi>;
status = "okay";
+};
- spi-flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spi-nand";
- spi-max-frequency = <104000000>;
- spi-tx-bus-width = <4>;
- spi-rx-bus-width = <4>;
- reg = <0>;
- };
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
};
&iomuxc {
@@ -121,4 +113,10 @@
MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0
>;
};
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x18b0
+ >;
+ };
};
diff --git a/arch/arm/dts/imx6ul-litesom.dtsi b/arch/arm/dts/imx6ul-litesom.dtsi
index 8f775f6974d1..8d6893210842 100644
--- a/arch/arm/dts/imx6ul-litesom.dtsi
+++ b/arch/arm/dts/imx6ul-litesom.dtsi
@@ -48,6 +48,7 @@
compatible = "grinn,imx6ul-litesom", "fsl,imx6ul";
memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x20000000>;
};
};
diff --git a/arch/arm/dts/imx6ul-opos6ul.dtsi b/arch/arm/dts/imx6ul-opos6ul.dtsi
index 8f16a0a81ce9..6ce84f92b027 100644
--- a/arch/arm/dts/imx6ul-opos6ul.dtsi
+++ b/arch/arm/dts/imx6ul-opos6ul.dtsi
@@ -1,192 +1,6 @@
-/*
- * Copyright 2018 Armadeus Systems <support@armadeus.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2017 Armadeus Systems <support@armadeus.com>
#include "imx6ul.dtsi"
-
-/ {
- memory {
- reg = <0x80000000 0>; /* will be filled by U-Boot */
- };
-
- reg_3v3: regulator-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- usdhc3_pwrseq: usdhc3-pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
- };
-};
-
-&fec1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet1>;
- phy-mode = "rmii";
- phy-reset-duration = <1>;
- phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
- phy-handle = <ðphy1>;
- phy-supply = <®_3v3>;
- status = "okay";
-
- mdio: mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy1: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- interrupt-parent = <&gpio4>;
- interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
- status = "okay";
- };
- };
-};
-
-/* Bluetooth */
-&uart8 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart8>;
- uart-has-rtscts;
- status = "okay";
-};
-
-/* eMMC */
-&usdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc1>;
- bus-width = <8>;
- no-1-8-v;
- non-removable;
- status = "okay";
-};
-
-/* WiFi */
-&usdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- bus-width = <4>;
- no-1-8-v;
- non-removable;
- mmc-pwrseq = <&usdhc3_pwrseq>;
- status = "okay";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- brcmf: bcrmf@1 {
- compatible = "brcm,bcm4329-fmac";
- reg = <1>;
- interrupt-parent = <&gpio2>;
- interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
- interrupt-names = "host-wake";
- };
-};
-
-&iomuxc {
- pinctrl_enet1: enet1grp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
- MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
- MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x130b0
- MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x130b0
- MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x130b0
- MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x130b0
- MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
- MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
- MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
- /* INT# */
- MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b0b0
- /* RST# */
- MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x130b0
- MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
- >;
- };
-
- pinctrl_uart8: uart8grp {
- fsl,pins = <
- MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x1b0b0
- MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x1b0b0
- MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x1b0b0
- MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x1b0b0
- /* BT_REG_ON */
- MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x130b0
- >;
- };
-
- pinctrl_usdhc1: usdhc1grp {
- fsl,pins = <
- MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
- MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
- MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
- MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
- MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
- MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
- MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059
- MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059
- MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059
- MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059
- >;
- };
-
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x1b0b0
- MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x100b0
- MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x1b0b0
- MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x1b0b0
- MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x1b0b0
- MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x1b0b0
- /* WL_REG_ON */
- MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x130b0
- /* WL_IRQ */
- MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0
- >;
- };
-};
+#include "imx6ul-imx6ull-opos6ul.dtsi"
diff --git a/arch/arm/dts/imx6ul-opos6uldev.dts b/arch/arm/dts/imx6ul-opos6uldev.dts
index 4a541be6b07f..375b98d7205a 100644
--- a/arch/arm/dts/imx6ul-opos6uldev.dts
+++ b/arch/arm/dts/imx6ul-opos6uldev.dts
@@ -1,298 +1,21 @@
-/*
- * Copyright 2017 Armadeus Systems <support@armadeus.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2017 Armadeus Systems <support@armadeus.com>
/dts-v1/;
#include "imx6ul-opos6ul.dtsi"
+#include "imx6ul-imx6ull-opos6uldev.dtsi"
/ {
- model = "Armadeus Systems OPOS6UL SoM on OPOS6ULDev board";
- compatible = "armadeus,opos6uldev", "armadeus,opos6ul", "fsl,imx6ul";
-
- chosen {
- stdout-path = &uart1;
- };
-
- backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm3 0 191000>;
- brightness-levels = <0 4 8 16 32 64 128 255>;
- default-brightness-level = <7>;
- power-supply = <®_5v>;
- status = "okay";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio_keys>;
-
- user-button {
- label = "User button";
- gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_MISC>;
- wakeup-source;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- user-led {
- label = "User";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_led>;
- gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- onewire {
- compatible = "w1-gpio";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_w1>;
- gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
- };
-
- reg_5v: regulator-5v {
- compatible = "regulator-fixed";
- regulator-name = "5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- reg_usbotg1_vbus: regulator-usbotg1vbus {
- compatible = "regulator-fixed";
- regulator-name = "usbotg1vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg1_vbus>;
- gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- reg_usbotg2_vbus: regulator-usbotg2vbus {
- compatible = "regulator-fixed";
- regulator-name = "usbotg2vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg2_vbus>;
- gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-&adc1 {
- vref-supply = <®_3v3>;
- status = "okay";
-};
-
-&can1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan1>;
- xceiver-supply = <®_5v>;
- status = "okay";
-};
-
-&can2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan2>;
- xceiver-supply = <®_5v>;
- status = "okay";
-};
-
-&ecspi4 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi4>;
- cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>;
- status = "okay";
-
- spidev0: spi@0 {
- compatible = "spidev";
- reg = <0>;
- spi-max-frequency = <5000000>;
- };
-
- spidev1: spi@1 {
- compatible = "spidev";
- reg = <1>;
- spi-max-frequency = <5000000>;
- };
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- clock_frequency = <400000>;
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- clock_frequency = <400000>;
- status = "okay";
-};
-
-&lcdif {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcdif>;
- display = <&display0>;
- lcd-supply = <®_3v3>;
- status = "okay";
-
- display0: display0 {
- bits-per-pixel = <18>;
- bus-width = <18>;
-
- display-timings {
- timing0: timing0 {
- clock-frequency = <33000033>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <96>;
- hfront-porch = <96>;
- vback-porch = <20>;
- vfront-porch = <21>;
- hsync-len = <64>;
- vsync-len = <4>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
- };
- };
-};
-
-&pwm3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm3>;
- status = "okay";
-};
-
-&snvs_pwrkey {
- status = "disabled";
-};
-
-&tsc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_tsc>;
- xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
- measure-delay-time = <0xffff>;
- pre-charge-time = <0xffff>;
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- status = "okay";
-};
-
-&usbotg1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg1_id>;
- vbus-supply = <®_usbotg1_vbus>;
- dr_mode = "otg";
- disable-over-current;
- status = "okay";
-};
-
-&usbotg2 {
- vbus-supply = <®_usbotg2_vbus>;
- dr_mode = "host";
- disable-over-current;
- status = "okay";
+ model = "Armadeus Systems OPOS6UL SoM (i.MX6UL) on OPOS6ULDev board";
+ compatible = "armadeus,imx6ul-opos6uldev", "armadeus,imx6ul-opos6ul", "fsl,imx6ul";
};
&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpios>;
+ pinctrl-0 = <&pinctrl_gpios>, <&pinctrl_tamper_gpios>;
- pinctrl_ecspi4: ecspi4grp {
+ pinctrl_tamper_gpios: tampergpiosgrp {
fsl,pins = <
- MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x1b0b0
- MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x1b0b0
- MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x1b0b0
- MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x1b0b0
- MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x1b0b0
- >;
- };
-
- pinctrl_flexcan1: flexcan1grp {
- fsl,pins = <
- MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0
- MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0
- >;
- };
-
- pinctrl_flexcan2: flexcan2grp {
- fsl,pins = <
- MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0
- MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0
- >;
- };
-
- pinctrl_gpios: gpiosgrp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0b0b0
- MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x0b0b0
- MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x0b0b0
- MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0b0b0
- MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x0b0b0
- MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0b0b0
- MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0b0b0
- MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x0b0b0
MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0b0b0
MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0b0b0
MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0
@@ -304,100 +27,6 @@
>;
};
- pinctrl_gpio_keys: gpiokeysgrp {
- fsl,pins = <
- MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0b0b0
- >;
- };
-
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
- MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
- >;
- };
-
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
- MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
- >;
- };
-
- pinctrl_lcdif: lcdifgrp {
- fsl,pins = <
- MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x100b1
- MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x100b1
- MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x100b1
- MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x100b1
- MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x100b1
- MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x100b1
- MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x100b1
- MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x100b1
- MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x100b1
- MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x100b1
- MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x100b1
- MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x100b1
- MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x100b1
- MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x100b1
- MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x100b1
- MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x100b1
- MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x100b1
- MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x100b1
- MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x100b1
- MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x100b1
- MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x100b1
- MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x100b1
- >;
- };
-
- pinctrl_led: ledgrp {
- fsl,pins = <
- MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0b0b0
- >;
- };
-
- pinctrl_pwm3: pwm3grp {
- fsl,pins = <
- MX6UL_PAD_NAND_ALE__PWM3_OUT 0x1b0b0
- >;
- };
-
- pinctrl_tsc: tscgrp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
- MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
- MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
- MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0
- >;
- };
-
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
- MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
- >;
- };
-
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
- MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
- >;
- };
-
- pinctrl_usbotg1_id: usbotg1idgrp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x1b0b0
- >;
- };
-
- pinctrl_usbotg1_vbus: usbotg1vbusgrp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1b0b0
- >;
- };
-
pinctrl_usbotg2_vbus: usbotg2vbusgrp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0
diff --git a/arch/arm/dts/imx6ul-phytec-phycore-som.dtsi b/arch/arm/dts/imx6ul-phytec-phycore-som.dtsi
index c2a7c7877948..3cddc68917a0 100644
--- a/arch/arm/dts/imx6ul-phytec-phycore-som.dtsi
+++ b/arch/arm/dts/imx6ul-phytec-phycore-som.dtsi
@@ -16,9 +16,13 @@
stdout-path = &uart1;
};
- memory {
+ /*
+ * Set the minimum memory size here and
+ * let the bootloader set the real size.
+ */
+ memory@80000000 {
device_type = "memory";
- reg = <0x80000000 0x20000000>;
+ reg = <0x80000000 0x8000000>;
};
gpio_leds_som: leds {
@@ -64,13 +68,17 @@
};
&i2c1 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
clock-frequency = <100000>;
status = "okay";
eeprom@52 {
compatible = "catalyst,24c32", "atmel,24c32";
+ pagesize = <32>;
reg = <0x52>;
};
};
@@ -142,6 +150,13 @@
>;
};
+ pinctrl_i2c1_gpio: i2cgpiogrp {
+ fsl,pins = <
+ MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0
+ MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
diff --git a/arch/arm/dts/imx6ul-phytec-segin-ff-rdk-nand.dts b/arch/arm/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
index 699dfcbf9a60..607eddc5030f 100644
--- a/arch/arm/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
+++ b/arch/arm/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
@@ -9,6 +9,8 @@
#include "imx6ul-phytec-phycore-som.dtsi"
#include "imx6ul-phytec-segin.dtsi"
#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
+#include "imx6ul-phytec-segin-peb-av-02.dtsi"
+#include "imx6ul-phytec-segin-peb-wlbt-05.dtsi"
/ {
model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with NAND";
diff --git a/arch/arm/dts/imx6ul-phytec-segin.dtsi b/arch/arm/dts/imx6ul-phytec-segin.dtsi
index 8d5f8dc6ad58..0d4ba9494cf2 100644
--- a/arch/arm/dts/imx6ul-phytec-segin.dtsi
+++ b/arch/arm/dts/imx6ul-phytec-segin.dtsi
@@ -106,7 +106,7 @@
&ecspi3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3>;
- cs-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
status = "disabled";
};
@@ -130,31 +130,6 @@
status = "disabled";
};
- stmpe: touchscreen@44 {
- compatible = "st,stmpe811";
- reg = <0x44>;
- interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
- interrupt-parent = <&gpio5>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_stmpe>;
- status = "disabled";
-
- touchscreen {
- compatible = "st,stmpe-ts";
- st,sample-time = <4>;
- st,mod-12b = <1>;
- st,ref-sel = <0>;
- st,adc-freq = <1>;
- st,ave-ctrl = <1>;
- st,touch-det-delay = <2>;
- st,settling = <2>;
- st,fraction-z = <7>;
- st,i-drive = <1>;
- touchscreen-inverted-x = <1>;
- touchscreen-inverted-y = <1>;
- };
- };
-
i2c_rtc: rtc@68 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rtc_int>;
@@ -176,12 +151,6 @@
};
};
-&pwm3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm3>;
- status = "disabled";
-};
-
&sai2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai2>;
@@ -222,6 +191,7 @@
no-1-8-v;
keep-power-in-suspend;
wakeup-source;
+ disable-wp;
status = "disabled";
};
@@ -267,12 +237,6 @@
>;
};
- pinctrl_pwm3: pwm3grp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x0b0b0
- >;
- };
-
pinctrl_rtc_int: rtcintgrp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059
@@ -289,12 +253,6 @@
>;
};
- pinctrl_stmpe: stmpegrp {
- fsl,pins = <
- MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059
- >;
- };
-
pinctrl_uart5: uart5grp {
fsl,pins = <
MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1
diff --git a/arch/arm/dts/imx6ul-pico-hobbit.dts b/arch/arm/dts/imx6ul-pico-hobbit.dts
index 39eeeddac39e..09f7ffa9ad8c 100644
--- a/arch/arm/dts/imx6ul-pico-hobbit.dts
+++ b/arch/arm/dts/imx6ul-pico-hobbit.dts
@@ -43,7 +43,7 @@
};
&i2c2 {
- clock_frequency = <100000>;
+ clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
diff --git a/arch/arm/dts/imx6ul-pico-pi.dts b/arch/arm/dts/imx6ul-pico-pi.dts
index de07357b27fc..6cd7d5877d20 100644
--- a/arch/arm/dts/imx6ul-pico-pi.dts
+++ b/arch/arm/dts/imx6ul-pico-pi.dts
@@ -43,7 +43,7 @@
};
&i2c2 {
- clock_frequency = <100000>;
+ clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
@@ -58,7 +58,7 @@
};
&i2c3 {
- clock_frequency = <100000>;
+ clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
diff --git a/arch/arm/dts/imx6ul-pico.dtsi b/arch/arm/dts/imx6ul-pico.dtsi
index de9f83189ba8..357ffb2f5ad6 100644
--- a/arch/arm/dts/imx6ul-pico.dtsi
+++ b/arch/arm/dts/imx6ul-pico.dtsi
@@ -20,7 +20,7 @@
stdout-path = &uart6;
};
- backlight {
+ backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm3 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -72,6 +72,17 @@
regulator-max-microvolt = <3300000>;
startup-delay-us = <200000>;
};
+
+ panel {
+ compatible = "vxt,vl050-8048nt-c01";
+ backlight = <&backlight>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
};
&can1 {
@@ -154,36 +165,17 @@
&lcdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
- display = <&display0>;
status = "okay";
- display0: display0 {
- bits-per-pixel = <32>;
- bus-width = <24>;
-
- display-timings {
- native-mode = <&timing0>;
-
- timing0: timing0 {
- clock-frequency = <33200000>;
- hactive = <800>;
- vactive = <480>;
- hfront-porch = <210>;
- hback-porch = <46>;
- hsync-len = <1>;
- vback-porch = <22>;
- vfront-porch = <23>;
- vsync-len = <1>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
};
};
};
&pwm3 {
+ #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "okay";
diff --git a/arch/arm/dts/imx6ul.dtsi b/arch/arm/dts/imx6ul.dtsi
index ad9cb37db774..afeec01f6522 100644
--- a/arch/arm/dts/imx6ul.dtsi
+++ b/arch/arm/dts/imx6ul.dtsi
@@ -43,15 +43,14 @@
sai1 = &sai1;
sai2 = &sai2;
sai3 = &sai3;
- spi0 = &qspi;
- spi1 = &ecspi1;
- spi2 = &ecspi2;
- spi3 = &ecspi3;
- spi4 = &ecspi4;
- usbphy0 = &usbphy1;
- usbphy1 = &usbphy2;
+ spi0 = &ecspi1;
+ spi1 = &ecspi2;
+ spi2 = &ecspi3;
+ spi3 = &ecspi4;
usb0 = &usbotg1;
usb1 = &usbotg2;
+ usbphy0 = &usbphy1;
+ usbphy1 = &usbphy2;
};
cpus {
@@ -62,6 +61,7 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
+ clock-frequency = <696000000>;
clock-latency = <61036>; /* two CLK32 periods */
#cooling-cells = <2>;
operating-points = <
@@ -95,18 +95,6 @@
};
};
- intc: interrupt-controller@a01000 {
- compatible = "arm,gic-400", "arm,cortex-a7-gic";
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupt-parent = <&intc>;
- reg = <0x00a01000 0x1000>,
- <0x00a02000 0x2000>,
- <0x00a04000 0x2000>,
- <0x00a06000 0x2000>;
- };
-
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
@@ -145,16 +133,6 @@
clock-output-names = "ipp_di1";
};
- tempmon: tempmon {
- compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon";
- interrupt-parent = <&gpc>;
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- fsl,tempmon = <&anatop>;
- nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
- nvmem-cell-names = "calib", "temp_grade";
- clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
- };
-
pmu {
compatible = "arm,cortex-a7-pmu";
interrupt-parent = <&gpc>;
@@ -173,6 +151,18 @@
reg = <0x00900000 0x20000>;
};
+ intc: interrupt-controller@a01000 {
+ compatible = "arm,gic-400", "arm,cortex-a7-gic";
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupt-parent = <&intc>;
+ reg = <0x00a01000 0x1000>,
+ <0x00a02000 0x2000>,
+ <0x00a04000 0x2000>,
+ <0x00a06000 0x2000>;
+ };
+
dma_apbh: dma-apbh@1804000 {
compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
reg = <0x01804000 0x2000>;
@@ -186,7 +176,7 @@
clocks = <&clks IMX6UL_CLK_APBHDMA>;
};
- gpmi: gpmi-nand@1806000 {
+ gpmi: nand-controller@1806000 {
compatible = "fsl,imx6q-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
@@ -229,6 +219,8 @@
clocks = <&clks IMX6UL_CLK_ECSPI1>,
<&clks IMX6UL_CLK_ECSPI1>;
clock-names = "ipg", "per";
+ dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -241,6 +233,8 @@
clocks = <&clks IMX6UL_CLK_ECSPI2>,
<&clks IMX6UL_CLK_ECSPI2>;
clock-names = "ipg", "per";
+ dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -253,6 +247,8 @@
clocks = <&clks IMX6UL_CLK_ECSPI3>,
<&clks IMX6UL_CLK_ECSPI3>;
clock-names = "ipg", "per";
+ dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -265,6 +261,8 @@
clocks = <&clks IMX6UL_CLK_ECSPI4>,
<&clks IMX6UL_CLK_ECSPI4>;
clock-names = "ipg", "per";
+ dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -345,6 +343,31 @@
dma-names = "rx", "tx";
status = "disabled";
};
+
+ asrc: asrc@2034000 {
+ compatible = "fsl,imx6ul-asrc", "fsl,imx53-asrc";
+ reg = <0x2034000 0x4000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_ASRC_IPG>,
+ <&clks IMX6UL_CLK_ASRC_MEM>, <&clks 0>,
+ <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+ <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+ <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+ <&clks IMX6UL_CLK_SPDIF>, <&clks 0>, <&clks 0>,
+ <&clks IMX6UL_CLK_SPBA>;
+ clock-names = "mem", "ipg", "asrck_0",
+ "asrck_1", "asrck_2", "asrck_3", "asrck_4",
+ "asrck_5", "asrck_6", "asrck_7", "asrck_8",
+ "asrck_9", "asrck_a", "asrck_b", "asrck_c",
+ "asrck_d", "asrck_e", "asrck_f", "spba";
+ dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
+ <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
+ dma-names = "rxa", "rxb", "rxc",
+ "txa", "txb", "txc";
+ fsl,asrc-rate = <48000>;
+ fsl,asrc-width = <16>;
+ status = "okay";
+ };
};
tsc: tsc@2040000 {
@@ -365,7 +388,7 @@
clocks = <&clks IMX6UL_CLK_PWM1>,
<&clks IMX6UL_CLK_PWM1>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -376,7 +399,7 @@
clocks = <&clks IMX6UL_CLK_PWM2>,
<&clks IMX6UL_CLK_PWM2>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -387,7 +410,7 @@
clocks = <&clks IMX6UL_CLK_PWM3>,
<&clks IMX6UL_CLK_PWM3>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -398,33 +421,33 @@
clocks = <&clks IMX6UL_CLK_PWM4>,
<&clks IMX6UL_CLK_PWM4>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
- can1: flexcan@2090000 {
+ can1: can@2090000 {
compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
reg = <0x02090000 0x4000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
<&clks IMX6UL_CLK_CAN1_SERIAL>;
clock-names = "ipg", "per";
- fsl,stop-mode = <&gpr 0x10 1 0x10 17>;
+ fsl,stop-mode = <&gpr 0x10 1>;
status = "disabled";
};
- can2: flexcan@2094000 {
+ can2: can@2094000 {
compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
reg = <0x02094000 0x4000>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_CAN2_IPG>,
<&clks IMX6UL_CLK_CAN2_SERIAL>;
clock-names = "ipg", "per";
- fsl,stop-mode = <&gpr 0x10 2 0x10 18>;
+ fsl,stop-mode = <&gpr 0x10 2>;
status = "disabled";
};
- gpt1: gpt@2098000 {
+ gpt1: timer@2098000 {
compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
reg = <0x02098000 0x4000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -512,12 +535,14 @@
<&clks IMX6UL_CLK_ENET2_REF_125M>;
clock-names = "ipg", "ahb", "ptp",
"enet_clk_ref", "enet_out";
- fsl,num-tx-queues=<1>;
- fsl,num-rx-queues=<1>;
+ fsl,num-tx-queues = <1>;
+ fsl,num-rx-queues = <1>;
+ fsl,stop-mode = <&gpr 0x10 4>;
+ fsl,magic-packet;
status = "disabled";
};
- kpp: kpp@20b8000 {
+ kpp: keypad@20b8000 {
compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp";
reg = <0x020b8000 0x4000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -525,14 +550,14 @@
status = "disabled";
};
- wdog1: wdog@20bc000 {
+ wdog1: watchdog@20bc000 {
compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_WDOG1>;
};
- wdog2: wdog@20c0000 {
+ wdog2: watchdog@20c0000 {
compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
@@ -540,7 +565,7 @@
status = "disabled";
};
- clks: ccm@20c4000 {
+ clks: clock-controller@20c4000 {
compatible = "fsl,imx6ul-ccm";
reg = <0x020c4000 0x4000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
@@ -552,7 +577,7 @@
anatop: anatop@20c8000 {
compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
- "syscon", "simple-bus";
+ "syscon", "simple-mfd";
reg = <0x020c8000 0x1000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
@@ -605,6 +630,16 @@
anatop-min-voltage = <725000>;
anatop-max-voltage = <1450000>;
};
+
+ tempmon: tempmon {
+ compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon";
+ interrupt-parent = <&gpc>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,tempmon = <&anatop>;
+ nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+ nvmem-cell-names = "calib", "temp_grade";
+ clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
+ };
};
usbphy1: usbphy@20c9000 {
@@ -652,6 +687,7 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
linux,keycode = <KEY_POWER>;
wakeup-source;
+ status = "disabled";
};
snvs_lpgpr: snvs-lpgpr {
@@ -669,7 +705,7 @@
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
};
- src: src@20d8000 {
+ src: reset-controller@20d8000 {
compatible = "fsl,imx6ul-src", "fsl,imx51-src";
reg = <0x020d8000 0x4000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
@@ -686,7 +722,7 @@
interrupt-parent = <&intc>;
};
- iomuxc: iomuxc@20e0000 {
+ iomuxc: pinctrl@20e0000 {
compatible = "fsl,imx6ul-iomuxc";
reg = <0x020e0000 0x4000>;
};
@@ -697,13 +733,14 @@
reg = <0x020e4000 0x4000>;
};
- gpt2: gpt@20e8000 {
+ gpt2: timer@20e8000 {
compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
reg = <0x020e8000 0x4000>;
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_GPT2_BUS>,
<&clks IMX6UL_CLK_GPT2_SERIAL>;
clock-names = "ipg", "per";
+ status = "disabled";
};
sdma: sdma@20ec000 {
@@ -725,7 +762,7 @@
clocks = <&clks IMX6UL_CLK_PWM5>,
<&clks IMX6UL_CLK_PWM5>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -736,7 +773,7 @@
clocks = <&clks IMX6UL_CLK_PWM6>,
<&clks IMX6UL_CLK_PWM6>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -747,7 +784,7 @@
clocks = <&clks IMX6UL_CLK_PWM7>,
<&clks IMX6UL_CLK_PWM7>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -758,7 +795,7 @@
clocks = <&clks IMX6UL_CLK_PWM8>,
<&clks IMX6UL_CLK_PWM8>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
};
@@ -770,7 +807,7 @@
reg = <0x02100000 0x100000>;
ranges;
- crypto: caam@2140000 {
+ crypto: crypto@2140000 {
compatible = "fsl,imx6ul-caam", "fsl,sec-v4.0";
#address-cells = <1>;
#size-cells = <1>;
@@ -781,19 +818,19 @@
<&clks IMX6UL_CLK_CAAM_MEM>;
clock-names = "ipg", "aclk", "mem";
- sec_jr0: jr0@1000 {
+ sec_jr0: jr@1000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x1000 0x1000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
};
- sec_jr1: jr1@2000 {
+ sec_jr1: jr@2000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x2000 0x1000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
};
- sec_jr2: jr2@3000 {
+ sec_jr2: jr@3000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x3000 0x1000>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
@@ -846,12 +883,14 @@
<&clks IMX6UL_CLK_ENET_REF>;
clock-names = "ipg", "ahb", "ptp",
"enet_clk_ref", "enet_out";
- fsl,num-tx-queues=<1>;
- fsl,num-rx-queues=<1>;
+ fsl,num-tx-queues = <1>;
+ fsl,num-rx-queues = <1>;
+ fsl,stop-mode = <&gpr 0x10 3>;
+ fsl,magic-packet;
status = "disabled";
};
- usdhc1: usdhc@2190000 {
+ usdhc1: mmc@2190000 {
compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
reg = <0x02190000 0x4000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -859,11 +898,13 @@
<&clks IMX6UL_CLK_USDHC1>,
<&clks IMX6UL_CLK_USDHC1>;
clock-names = "ipg", "ahb", "per";
+ fsl,tuning-step = <2>;
+ fsl,tuning-start-tap = <20>;
bus-width = <4>;
status = "disabled";
};
- usdhc2: usdhc@2194000 {
+ usdhc2: mmc@2194000 {
compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
reg = <0x02194000 0x4000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -872,6 +913,8 @@
<&clks IMX6UL_CLK_USDHC2>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
+ fsl,tuning-step = <2>;
+ fsl,tuning-start-tap = <20>;
status = "disabled";
};
@@ -934,7 +977,7 @@
status = "disabled";
};
- ocotp: ocotp-ctrl@21bc000 {
+ ocotp: efuse@21bc000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,imx6ul-ocotp", "syscon";
@@ -954,6 +997,15 @@
};
};
+ csi: csi@21c4000 {
+ compatible = "fsl,imx6ul-csi", "fsl,imx7-csi";
+ reg = <0x021c4000 0x4000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_CSI>;
+ clock-names = "mclk";
+ status = "disabled";
+ };
+
lcdif: lcdif@21c8000 {
compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
reg = <0x021c8000 0x4000>;
@@ -965,6 +1017,14 @@
status = "disabled";
};
+ pxp: pxp@21cc000 {
+ compatible = "fsl,imx6ul-pxp";
+ reg = <0x021cc000 0x4000>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_PXP>;
+ clock-names = "axi";
+ };
+
qspi: spi@21e0000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -978,7 +1038,7 @@
status = "disabled";
};
- wdog3: wdog@21e4000 {
+ wdog3: watchdog@21e4000 {
compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
reg = <0x021e4000 0x4000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/dts/imx6ull-colibri.dtsi b/arch/arm/dts/imx6ull-colibri.dtsi
index e9e60e82d48f..951a2a6c5a65 100644
--- a/arch/arm/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/dts/imx6ull-colibri.dtsi
@@ -1,21 +1,22 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
/*
- * Copyright 2019-2021 Toradex AG
+ * Copyright 2018-2021 Toradex
*/
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
#include "imx6ull.dtsi"
/ {
- /* Ethernet aliases to ensure correct MAC addresses */
aliases {
ethernet0 = &fec2;
ethernet1 = &fec1;
};
- chosen {
- stdout-path = &uart1;
+ bl: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_bl_on>;
+ enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
};
reg_module_3v3: regulator-module-3v3 {
@@ -34,14 +35,7 @@
regulator-max-microvolt = <3300000>;
};
- reg_5v0: regulator-5v0 {
- compatible = "regulator-fixed";
- regulator-name = "5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- reg_sd1_vqmmc: regulator-sd1-vqmmc {
+ reg_sd1_vmmc: regulator-sd1-vmmc {
compatible = "regulator-gpio";
gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
@@ -53,29 +47,6 @@
states = <1800000 0x1 3300000 0x0>;
vin-supply = <®_module_3v3>;
};
-
- reg_usbh_vbus: regulator-usbh-vbus {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbh_reg>;
- regulator-name = "VCC_USB[1-4]";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; /* USBH_PEN */
- vin-supply = <®_5v0>;
- };
-
- reg_eth_phy: regulator-eth-phy {
- compatible = "regulator-fixed-clock";
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "eth_phy";
- regulator-type = "voltage";
- vin-supply = <®_module_3v3>;
- clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>;
- startup-delay-us = <150000>;
- };
};
&adc1 {
@@ -83,20 +54,31 @@
vref-supply = <®_module_3v3_avdd>;
};
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "disabled";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "disabled";
+};
+
/* Colibri SPI */
&ecspi1 {
- cs-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
};
-/* Ethernet */
&fec2 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&pinctrl_enet2>;
+ pinctrl-1 = <&pinctrl_enet2_sleep>;
phy-mode = "rmii";
phy-handle = <ðphy1>;
- phy-supply = <®_eth_phy>;
status = "okay";
mdio {
@@ -111,22 +93,24 @@
};
};
-/*
- * I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
- */
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ nand-on-flash-bbt;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+ status = "okay";
+};
+
&i2c1 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- status = "okay";
};
-/*
- * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
- * touch screen controller
- */
&i2c2 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c2>;
@@ -152,32 +136,30 @@
};
};
-/* PWM <A> */
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat
+ &pinctrl_lcdif_ctrl>;
+};
+
&pwm4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
- #pwm-cells = <3>;
};
-/* PWM <B> */
&pwm5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm5>;
- #pwm-cells = <3>;
};
-/* PWM <C> */
&pwm6 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm6>;
- #pwm-cells = <3>;
};
-/* PWM <D> */
&pwm7 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm7>;
- #pwm-cells = <3>;
};
&sdma {
@@ -188,16 +170,13 @@
status = "disabled";
};
-/* Colibri UART_A */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1>;
uart-has-rtscts;
fsl,dte-mode;
- status = "okay";
};
-/* Colibri UART_B */
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
@@ -205,51 +184,39 @@
fsl,dte-mode;
};
-/* Colibri UART_C */
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5>;
fsl,dte-mode;
};
-/* Colibri USBC */
&usbotg1 {
- dr_mode = "host";
+ dr_mode = "otg";
srp-disable;
hnp-disable;
adp-disable;
- status = "okay";
};
-/* Colibri USBH */
&usbotg2 {
dr_mode = "host";
- vbus-supply = <®_usbh_vbus>;
- status = "okay";
};
-/* Colibri MMC */
&usdhc1 {
assigned-clocks = <&clks IMX6UL_CLK_USDHC1_SEL>, <&clks IMX6UL_CLK_USDHC1>;
assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
assigned-clock-rates = <0>, <198000000>;
- bus-width = <4>;
- cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; /* MMC_CD */
- disable-wp;
- no-1-8-v;
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>;
- pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
- pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
- vqmmc-supply = <®_sd1_vqmmc>;
- status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
};
&iomuxc {
pinctrl_can_int: canint-grp {
fsl,pins = <
- /* SODIMM 73 */
- MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0X14
+ MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0x13010 /* SODIMM 73 */
>;
};
@@ -268,17 +235,39 @@
>;
};
+ pinctrl_enet2_sleep: enet2sleepgrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x0
+ MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0x0
+ MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x0
+ MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x0
+ MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x0
+ MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x0
+ MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031
+ MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0
+ MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x0
+ MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x0
+ >;
+ };
+
pinctrl_ecspi1_cs: ecspi1-cs-grp {
fsl,pins = <
- MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x000a0
+ MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x70a0 /* SODIMM 86 */
>;
};
pinctrl_ecspi1: ecspi1-grp {
fsl,pins = <
- MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x000a0
- MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x000a0
- MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x100a0
+ MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x000a0 /* SODIMM 88 */
+ MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x000a0 /* SODIMM 92 */
+ MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x100a0 /* SODIMM 90 */
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1-grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x1b020
+ MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x1b020
>;
};
@@ -291,77 +280,114 @@
pinctrl_gpio_bl_on: gpio-bl-on-grp {
fsl,pins = <
- MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x000a0
+ MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x30a0 /* SODIMM 71 */
>;
};
pinctrl_gpio1: gpio1-grp {
fsl,pins = <
- MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0x74 /* SODIMM 55 */
- MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0x74 /* SODIMM 63 */
- MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0X14 /* SODIMM 77 */
- MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x14 /* SODIMM 99 */
- MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0x14 /* SODIMM 133 */
- MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x14 /* SODIMM 135 */
- MX6UL_PAD_UART3_CTS_B__GPIO1_IO26 0x14 /* SODIMM 100 */
- MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x14 /* SODIMM 102 */
- MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07 0x14 /* SODIMM 104 */
- MX6UL_PAD_UART3_RTS_B__GPIO1_IO27 0x14 /* SODIMM 186 */
+ MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x10b0 /* SODIMM 77 */
+ MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x70a0 /* SODIMM 99 */
+ MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0x10b0 /* SODIMM 133 */
+ MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x10b0 /* SODIMM 135 */
+ MX6UL_PAD_UART3_CTS_B__GPIO1_IO26 0x10b0 /* SODIMM 100 */
+ MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x70a0 /* SODIMM 102 */
+ MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07 0x10b0 /* SODIMM 104 */
+ MX6UL_PAD_UART3_RTS_B__GPIO1_IO27 0x10b0 /* SODIMM 186 */
>;
};
pinctrl_gpio2: gpio2-grp { /* Camera */
fsl,pins = <
- MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x74 /* SODIMM 69 */
- MX6UL_PAD_CSI_MCLK__GPIO4_IO17 0x14 /* SODIMM 75 */
- MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x14 /* SODIMM 85 */
- MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18 0x14 /* SODIMM 96 */
- MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x14 /* SODIMM 98 */
+ MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x10b0 /* SODIMM 69 */
+ MX6UL_PAD_CSI_MCLK__GPIO4_IO17 0x10b0 /* SODIMM 75 */
+ MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x10b0 /* SODIMM 85 */
+ MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18 0x10b0 /* SODIMM 96 */
+ MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x10b0 /* SODIMM 98 */
>;
};
pinctrl_gpio3: gpio3-grp { /* CAN2 */
fsl,pins = <
- MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02 0x14 /* SODIMM 178 */
- MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03 0x14 /* SODIMM 188 */
+ MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02 0x10b0 /* SODIMM 178 */
+ MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03 0x10b0 /* SODIMM 188 */
>;
};
pinctrl_gpio4: gpio4-grp {
fsl,pins = <
- MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x74 /* SODIMM 65 */
+ MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x10b0 /* SODIMM 65 */
>;
};
pinctrl_gpio5: gpio5-grp { /* ATMEL MXT TOUCH */
fsl,pins = <
- MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x74 /* SODIMM 106 */
+ MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0xb0a0 /* SODIMM 106 */
>;
};
pinctrl_gpio6: gpio6-grp { /* Wifi pins */
fsl,pins = <
- MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x14 /* SODIMM 89 */
- MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x14 /* SODIMM 79 */
- MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x14 /* SODIMM 81 */
- MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x14 /* SODIMM 97 */
- MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x14 /* SODIMM 101 */
- MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x14 /* SODIMM 103 */
- MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0x14 /* SODIMM 94 */
+ MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x10b0 /* SODIMM 89 */
+ MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x10b0 /* SODIMM 79 */
+ MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x10b0 /* SODIMM 81 */
+ MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x10b0 /* SODIMM 97 */
+ MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x10b0 /* SODIMM 101 */
+ MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x10b0 /* SODIMM 103 */
+ MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0x10b0 /* SODIMM 94 */
+ >;
+ };
+
+ pinctrl_gpio7: gpio7-grp { /* CAN1 */
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0xb0b0/* SODIMM 55 */
+ MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0xb0b0 /* SODIMM 63 */
+ >;
+ };
+
+ /*
+ * With an eMMC instead of a raw NAND device the following pins
+ * are available at SODIMM pins
+ */
+ pinctrl_gpmi_gpio: gpmi-gpio-grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x10b0 /* SODIMM 140 */
+ MX6UL_PAD_NAND_CE0_B__GPIO4_IO13 0x10b0 /* SODIMM 144 */
+ MX6UL_PAD_NAND_CLE__GPIO4_IO15 0x10b0 /* SODIMM 146 */
+ MX6UL_PAD_NAND_READY_B__GPIO4_IO12 0x10b0 /* SODIMM 142 */
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpmi-nand-grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x100a9
+ MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x100a9
+ MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x100a9
+ MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x100a9
+ MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x100a9
+ MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x100a9
+ MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x100a9
+ MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x100a9
+ MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x100a9
+ MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x100a9
+ MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x100a9
+ MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x100a9
+ MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x100a9
+ MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x100a9
>;
};
pinctrl_i2c1: i2c1-grp {
fsl,pins = <
- MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
- MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+ MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 /* SODIMM 196 */
+ MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 /* SODIMM 194 */
>;
};
pinctrl_i2c1_gpio: i2c1-gpio-grp {
fsl,pins = <
- MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0
- MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0
+ MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0 /* SODIMM 196 */
+ MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0 /* SODIMM 194 */
>;
};
@@ -381,114 +407,114 @@
pinctrl_lcdif_dat: lcdif-dat-grp {
fsl,pins = <
- MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x00079
- MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x00079
- MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x00079
- MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x00079
- MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x00079
- MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x00079
- MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x00079
- MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x00079
- MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x00079
- MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x00079
- MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x00079
- MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x00079
- MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x00079
- MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x00079
- MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x00079
- MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x00079
- MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x00079
- MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x00079
+ MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x00079 /* SODIMM 76 */
+ MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x00079 /* SODIMM 70 */
+ MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x00079 /* SODIMM 60 */
+ MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x00079 /* SODIMM 58 */
+ MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x00079 /* SODIMM 78 */
+ MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x00079 /* SODIMM 72 */
+ MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x00079 /* SODIMM 80 */
+ MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x00079 /* SODIMM 46 */
+ MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x00079 /* SODIMM 62 */
+ MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x00079 /* SODIMM 48 */
+ MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x00079 /* SODIMM 74 */
+ MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x00079 /* SODIMM 50 */
+ MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x00079 /* SODIMM 52 */
+ MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x00079 /* SODIMM 54 */
+ MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x00079 /* SODIMM 66 */
+ MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x00079 /* SODIMM 64 */
+ MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x00079 /* SODIMM 57 */
+ MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x00079 /* SODIMM 61 */
>;
};
pinctrl_lcdif_ctrl: lcdif-ctrl-grp {
fsl,pins = <
- MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x00079
- MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x00079
- MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x00079
- MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x00079
+ MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x00079 /* SODIMM 56 */
+ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x00079 /* SODIMM 44 */
+ MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x00079 /* SODIMM 68 */
+ MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x00079 /* SODIMM 82 */
>;
};
pinctrl_pwm4: pwm4-grp {
fsl,pins = <
- MX6UL_PAD_NAND_WP_B__PWM4_OUT 0x00079
+ MX6UL_PAD_NAND_WP_B__PWM4_OUT 0x00079 /* SODIMM 59 */
>;
};
pinctrl_pwm5: pwm5-grp {
fsl,pins = <
- MX6UL_PAD_NAND_DQS__PWM5_OUT 0x00079
+ MX6UL_PAD_NAND_DQS__PWM5_OUT 0x00079 /* SODIMM 28 */
>;
};
pinctrl_pwm6: pwm6-grp {
fsl,pins = <
- MX6UL_PAD_ENET1_TX_EN__PWM6_OUT 0x00079
+ MX6UL_PAD_ENET1_TX_EN__PWM6_OUT 0x00079 /* SODIMM 30 */
>;
};
pinctrl_pwm7: pwm7-grp {
fsl,pins = <
- MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x00079
+ MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x00079 /* SODIMM 67 */
>;
};
pinctrl_uart1: uart1-grp {
fsl,pins = <
- MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX 0x1b0b1
- MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX 0x1b0b1
- MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS 0x1b0b1
- MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS 0x1b0b1
+ MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX 0x1b0b1 /* SODIMM 33 */
+ MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX 0x1b0b1 /* SODIMM 35 */
+ MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS 0x1b0b1 /* SODIMM 27 */
+ MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS 0x1b0b1 /* SODIMM 25 */
>;
};
pinctrl_uart1_ctrl1: uart1-ctrl1-grp { /* Additional DTR, DCD */
fsl,pins = <
- MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x1b0b1 /* DCD */
- MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x1b0b1 /* DSR */
- MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x1b0b1 /* DTR */
- MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x1b0b1 /* RI */
+ MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x70a0 /* SODIMM 31 */
+ MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x10b0 /* SODIMM 29 */
+ MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x90b1 /* SODIMM 23 */
+ MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x10b0 /* SODIMM 37 */
>;
};
pinctrl_uart2: uart2-grp {
fsl,pins = <
- MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX 0x1b0b1
- MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x1b0b1
- MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS 0x1b0b1
- MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS 0x1b0b1
+ MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX 0x1b0b1 /* SODIMM 36 */
+ MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x1b0b1 /* SODIMM 38 */
+ MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS 0x1b0b1 /* SODIMM 32 */
+ MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS 0x1b0b1 /* SODIMM 34 */
>;
};
pinctrl_uart5: uart5-grp {
fsl,pins = <
- MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX 0x1b0b1
- MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX 0x1b0b1
+ MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX 0x1b0b1 /* SODIMM 19 */
+ MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX 0x1b0b1 /* SODIMM 21 */
>;
};
pinctrl_usbh_reg: gpio-usbh-reg {
fsl,pins = <
- MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x1b0b1 /* SODIMM 129 USBH PEN */
+ MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x10b0 /* SODIMM 129 */
>;
};
pinctrl_usdhc1: usdhc1-grp {
fsl,pins = <
- MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
- MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
- MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
- MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
- MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
- MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x17059 /* SODIMM 47 */
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x10059 /* SODIMM 190 */
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 /* SODIMM 192 */
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 /* SODIMM 49 */
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 /* SODIMM 51 */
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 /* SODIMM 53 */
>;
};
pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
fsl,pins = <
- MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
- MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x170b9
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x100b9
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
@@ -498,8 +524,8 @@
pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
fsl,pins = <
- MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
- MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x170f9
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x100f9
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
@@ -509,14 +535,35 @@
pinctrl_usdhc2: usdhc2-grp {
fsl,pins = <
- MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17059
- MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17059
- MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17059
- MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17059
- MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17059
- MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x17059
+ MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17069
+ MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17069
+ MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17069
+ MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17069
+ MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17069
+ MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x17069
+
+ MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x10
+ >;
+ };
+
+ pinctrl_usdhc2emmc: usdhc2emmcgrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17059
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059
+ >;
+ };
- MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x14
+ pinctrl_wdog: wdog-grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0
>;
};
};
@@ -524,59 +571,65 @@
&iomuxc_snvs {
pinctrl_snvs_gpio1: snvs-gpio1-grp {
fsl,pins = <
- MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x14 /* SODIMM 93 */
- MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x14 /* SODIMM 95 */
- MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10 0x74 /* SODIMM 105 */
- MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x14 /* SODIMM 131 USBH OC */
- MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x74 /* SODIMM 138 */
+ MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x110a0 /* SODIMM 93 */
+ MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x110a0 /* SODIMM 95 */
+ MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10 0x1b0a0 /* SODIMM 105 */
+ MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0a0 /* SODIMM 131 */
+ MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x110a0 /* SODIMM 138 */
>;
};
pinctrl_snvs_gpio2: snvs-gpio2-grp { /* ATMEL MXT TOUCH */
fsl,pins = <
- MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x74 /* SODIMM 107 */
+ MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0xb0a0 /* SODIMM 107 */
>;
};
pinctrl_snvs_gpio3: snvs-gpio3-grp { /* Wifi pins */
fsl,pins = <
- MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x14 /* SODIMM 127 */
+ MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x130a0 /* SODIMM 127 */
>;
};
pinctrl_snvs_ad7879_int: snvs-ad7879-int-grp { /* TOUCH Interrupt */
fsl,pins = <
- MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0
+ MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x100b0
>;
};
pinctrl_snvs_reg_sd: snvs-reg-sd-grp {
fsl,pins = <
- MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x4001b8b0
+ MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x400100b0
>;
};
pinctrl_snvs_usbc_det: snvs-usbc-det-grp {
fsl,pins = <
- MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0
+ MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x130b0
>;
};
pinctrl_snvs_gpiokeys: snvs-gpiokeys-grp {
fsl,pins = <
- MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x130b0
+ MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x130a0 /* SODIMM 45 */
>;
};
pinctrl_snvs_usdhc1_cd: snvs-usdhc1-cd-grp {
fsl,pins = <
- MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0b0 /* CD */
+ MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0a0 /* SODIMM 43 */
+ >;
+ };
+
+ pinctrl_snvs_usdhc1_sleep_cd: snvs-usdhc1-cd-grp-slp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0
>;
};
pinctrl_snvs_wifi_pdn: snvs-wifi-pdn-grp {
fsl,pins = <
- MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x14
+ MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x130a0
>;
};
};
diff --git a/arch/arm/dts/imx6ull-myir-mys-6ulx-eval.dts b/arch/arm/dts/imx6ull-myir-mys-6ulx-eval.dts
index 2fd69da02843..79cc45728cd2 100644
--- a/arch/arm/dts/imx6ull-myir-mys-6ulx-eval.dts
+++ b/arch/arm/dts/imx6ull-myir-mys-6ulx-eval.dts
@@ -7,7 +7,6 @@
/dts-v1/;
#include "imx6ull.dtsi"
#include "imx6ull-myir-mys-6ulx.dtsi"
-#include "imx6ull-mys-6ulx-u-boot.dtsi"
/ {
model = "MYiR i.MX6ULL MYS-6ULX Single Board Computer with NAND";
@@ -15,5 +14,6 @@
};
&gpmi {
+ fsl,use-minimum-ecc;
status = "okay";
};
diff --git a/arch/arm/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts b/arch/arm/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
index 9648d4ecaf58..8e2a4c5d7765 100644
--- a/arch/arm/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
+++ b/arch/arm/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
@@ -9,6 +9,7 @@
#include "imx6ull-phytec-phycore-som.dtsi"
#include "imx6ull-phytec-segin.dtsi"
#include "imx6ull-phytec-segin-peb-eval-01.dtsi"
+#include "imx6ull-phytec-segin-peb-av-02.dtsi"
/ {
model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with eMMC";
diff --git a/arch/arm/dts/imx6ull-phytec-segin.dtsi b/arch/arm/dts/imx6ull-phytec-segin.dtsi
index c1595fc785f7..e287a0453b5f 100644
--- a/arch/arm/dts/imx6ull-phytec-segin.dtsi
+++ b/arch/arm/dts/imx6ull-phytec-segin.dtsi
@@ -14,7 +14,6 @@
&iomuxc {
/delete-node/ flexcan1engrp;
/delete-node/ rtcintgrp;
- /delete-node/ stmpegrp;
};
&iomuxc_snvs {
@@ -29,10 +28,4 @@
MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059
>;
};
-
- pinctrl_stmpe: stmpegrp {
- fsl,pins = <
- MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059
- >;
- };
};
diff --git a/arch/arm/dts/imx6ull.dtsi b/arch/arm/dts/imx6ull.dtsi
index f224e20bda92..9bf67490ac49 100644
--- a/arch/arm/dts/imx6ull.dtsi
+++ b/arch/arm/dts/imx6ull.dtsi
@@ -12,6 +12,7 @@
/delete-node/ &crypto;
&cpu0 {
+ clock-frequency = <900000000>;
operating-points = <
/* kHz uV */
900000 1275000
@@ -34,6 +35,12 @@
compatible = "fsl,imx6ull-ocotp", "syscon";
};
+&pxp {
+ compatible = "fsl,imx6ull-pxp";
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+};
+
&usdhc1 {
compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc";
};
@@ -61,6 +68,13 @@
clock-names = "dcp";
};
+ rngb: rng@2284000 {
+ compatible = "fsl,imx6ull-rngb", "fsl,imx25-rngb";
+ reg = <0x02284000 0x4000>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_DUMMY>;
+ };
+
iomuxc_snvs: iomuxc-snvs@2290000 {
compatible = "fsl,imx6ull-iomuxc-snvs";
reg = <0x02290000 0x4000>;
diff --git a/arch/arm/dts/imx6ulz.dtsi b/arch/arm/dts/imx6ulz.dtsi
index aeb2ddc540e1..0b5f1a763567 100644
--- a/arch/arm/dts/imx6ulz.dtsi
+++ b/arch/arm/dts/imx6ulz.dtsi
@@ -16,7 +16,6 @@
/delete-property/ serial7;
/delete-property/ spi2;
/delete-property/ spi3;
- /delete-property/ spi4;
};
};
diff --git a/include/dt-bindings/clock/imx6qdl-clock.h b/include/dt-bindings/clock/imx6qdl-clock.h
index 29050337d9d5..e20c43cc36f6 100644
--- a/include/dt-bindings/clock/imx6qdl-clock.h
+++ b/include/dt-bindings/clock/imx6qdl-clock.h
@@ -1,9 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright 2014 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#ifndef __DT_BINDINGS_CLOCK_IMX6QDL_H
@@ -269,6 +266,13 @@
#define IMX6QDL_CLK_PRG0_APB 256
#define IMX6QDL_CLK_PRG1_APB 257
#define IMX6QDL_CLK_PRE_AXI 258
-#define IMX6QDL_CLK_END 259
+#define IMX6QDL_CLK_MLB_SEL 259
+#define IMX6QDL_CLK_MLB_PODF 260
+#define IMX6QDL_CLK_EPIT1 261
+#define IMX6QDL_CLK_EPIT2 262
+#define IMX6QDL_CLK_MMDC_P0_IPG 263
+#define IMX6QDL_CLK_DCIC1 264
+#define IMX6QDL_CLK_DCIC2 265
+#define IMX6QDL_CLK_END 266
#endif /* __DT_BINDINGS_CLOCK_IMX6QDL_H */
--
2.25.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v1] ARM: dts: imx: Fix iMX6QDL DHCOM PDK2 DTC Warnings
2022-04-27 2:49 ` Fabio Estevam
@ 2022-04-27 7:53 ` Marek Vasut
2022-04-27 13:11 ` Tom Rini
0 siblings, 1 reply; 9+ messages in thread
From: Marek Vasut @ 2022-04-27 7:53 UTC (permalink / raw)
To: Fabio Estevam, Marcel Ziswiler
Cc: U-Boot-Denx, Marcel Ziswiler, NXP i.MX U-Boot Team, Simon Glass,
Stefano Babic, Tom Rini
On 4/27/22 04:49, Fabio Estevam wrote:
> Hi Marcel,
>
> On Tue, Apr 26, 2022 at 7:29 PM Marcel Ziswiler <marcel@ziswiler.com> wrote:
>
>> Messing with all those so late in the game does not seem like too good
>> of an idea. Therefore, I suggest reverting just that one PWM node for
>> now. We may (and really should) properly synchronise all i.MX 6 DTs
>> again in the next cycle.
>
> I did an attempt to sync the imx6 dts with Linux and generated the
> attached patch.
>
> It builds the dtb's cleanly.
>
> Boot tested only on a imx6q-sabresd.
>
> I can send it after 2022.07 is released.
We're in rc1, there is still time to get things synced for 2022.07, so
just send it.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v1] ARM: dts: imx: Fix iMX6QDL DHCOM PDK2 DTC Warnings
2022-04-27 7:53 ` Marek Vasut
@ 2022-04-27 13:11 ` Tom Rini
0 siblings, 0 replies; 9+ messages in thread
From: Tom Rini @ 2022-04-27 13:11 UTC (permalink / raw)
To: Marek Vasut
Cc: Fabio Estevam, Marcel Ziswiler, U-Boot-Denx, Marcel Ziswiler,
NXP i.MX U-Boot Team, Simon Glass, Stefano Babic
[-- Attachment #1: Type: text/plain, Size: 894 bytes --]
On Wed, Apr 27, 2022 at 09:53:51AM +0200, Marek Vasut wrote:
> On 4/27/22 04:49, Fabio Estevam wrote:
> > Hi Marcel,
> >
> > On Tue, Apr 26, 2022 at 7:29 PM Marcel Ziswiler <marcel@ziswiler.com> wrote:
> >
> > > Messing with all those so late in the game does not seem like too good
> > > of an idea. Therefore, I suggest reverting just that one PWM node for
> > > now. We may (and really should) properly synchronise all i.MX 6 DTs
> > > again in the next cycle.
> >
> > I did an attempt to sync the imx6 dts with Linux and generated the
> > attached patch.
> >
> > It builds the dtb's cleanly.
> >
> > Boot tested only on a imx6q-sabresd.
> >
> > I can send it after 2022.07 is released.
>
> We're in rc1, there is still time to get things synced for 2022.07, so just
> send it.
Yes, please! These dts files should be getting re-synced regularly.
--
Tom
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2022-04-27 13:11 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-04-26 22:29 [PATCH v1] ARM: dts: imx: Fix iMX6QDL DHCOM PDK2 DTC Warnings Marcel Ziswiler
2022-04-26 22:56 ` Marek Vasut
2022-04-26 23:02 ` Tom Rini
2022-04-26 23:04 ` Marcel Ziswiler
2022-04-26 23:55 ` Marek Vasut
2022-04-27 0:46 ` Fabio Estevam
2022-04-27 2:49 ` Fabio Estevam
2022-04-27 7:53 ` Marek Vasut
2022-04-27 13:11 ` Tom Rini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.