* [PATCH 1/2] powerpc/configs: merge pseries_defconfig and pseries_le_defconfig
@ 2015-05-15 5:47 Cyril Bur
2015-05-15 5:47 ` [PATCH 2/2] powerpc: replace pseries_le_defconfig with a Makefile target using merge_config Cyril Bur
2015-05-24 1:57 ` [PATCH 1/2] powerpc/configs: merge pseries_defconfig and pseries_le_defconfig Anton Blanchard
0 siblings, 2 replies; 5+ messages in thread
From: Cyril Bur @ 2015-05-15 5:47 UTC (permalink / raw)
To: linuxppc-dev
These two configs should be identical with the exception of big or little
endian
The big endian version has XMON_DEFAULT turned on while the little endian has
XMON_DEFAULT not set. Enable XMON_DEFAULT for little endian.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
---
arch/powerpc/configs/pseries_le_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/powerpc/configs/pseries_le_defconfig b/arch/powerpc/configs/pseries_le_defconfig
index 09bc96e..2497c7d 100644
--- a/arch/powerpc/configs/pseries_le_defconfig
+++ b/arch/powerpc/configs/pseries_le_defconfig
@@ -298,6 +298,7 @@ CONFIG_CODE_PATCHING_SELFTEST=y
CONFIG_FTR_FIXUP_SELFTEST=y
CONFIG_MSI_BITMAP_SELFTEST=y
CONFIG_XMON=y
+CONFIG_XMON_DEFAULT=y
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
--
1.9.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/2] powerpc: replace pseries_le_defconfig with a Makefile target using merge_config
2015-05-15 5:47 [PATCH 1/2] powerpc/configs: merge pseries_defconfig and pseries_le_defconfig Cyril Bur
@ 2015-05-15 5:47 ` Cyril Bur
2015-05-24 1:57 ` [PATCH 1/2] powerpc/configs: merge pseries_defconfig and pseries_le_defconfig Anton Blanchard
1 sibling, 0 replies; 5+ messages in thread
From: Cyril Bur @ 2015-05-15 5:47 UTC (permalink / raw)
To: linuxppc-dev
Rather than continuing to maintain a copy of pseries_defconfig with enabled
CONFIG_CPU_LITTLE_ENDIAN, use the generic merge_config script and use an
le.config to enable little endian on top of pseries_defconfig without the need
for a duplicated _defconfig file.
This method will require less maintenance in the future and will ensure that
both 'defconfigs' are always in sync.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
---
arch/powerpc/Makefile | 3 +
arch/powerpc/configs/le.config | 1 +
arch/powerpc/configs/pseries_le_defconfig | 320 ------------------------------
3 files changed, 4 insertions(+), 320 deletions(-)
create mode 100644 arch/powerpc/configs/le.config
delete mode 100644 arch/powerpc/configs/pseries_le_defconfig
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 07a4808..e302c2c 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -269,6 +269,9 @@ bootwrapper_install:
%.dtb: scripts
$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
+pseries_le_defconfig: pseries_defconfig
+ $(Q)$(MAKE) le.config
+
define archhelp
@echo '* zImage - Build default images selected by kernel config'
@echo ' zImage.* - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)'
diff --git a/arch/powerpc/configs/le.config b/arch/powerpc/configs/le.config
new file mode 100644
index 0000000..ee43fdb
--- /dev/null
+++ b/arch/powerpc/configs/le.config
@@ -0,0 +1 @@
+CONFIG_CPU_LITTLE_ENDIAN=y
diff --git a/arch/powerpc/configs/pseries_le_defconfig b/arch/powerpc/configs/pseries_le_defconfig
deleted file mode 100644
index 2497c7d..0000000
--- a/arch/powerpc/configs/pseries_le_defconfig
+++ /dev/null
@@ -1,320 +0,0 @@
-CONFIG_PPC64=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2048
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_NUMA_BALANCING=y
-CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_MEMCG=y
-CONFIG_MEMCG_SWAP=y
-CONFIG_CGROUP_PERF=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_USER_NS=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_KPROBES=y
-CONFIG_JUMP_LABEL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_PPC_SPLPAR=y
-CONFIG_SCANLOG=m
-CONFIG_PPC_SMLPAR=y
-CONFIG_DTL=y
-# CONFIG_PPC_PMAC is not set
-CONFIG_RTAS_FLASH=m
-CONFIG_IBMEBUS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-CONFIG_HZ_100=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PPC_TRANSACTIONAL_MEM=y
-CONFIG_KEXEC=y
-CONFIG_IRQ_ALL_CPUS=y
-CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_KSM=y
-CONFIG_TRANSPARENT_HUGEPAGE=y
-CONFIG_PPC_64K_PAGES=y
-CONFIG_PPC_SUBPAGE_PROT=y
-CONFIG_SCHED_SMT=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_HOTPLUG_PCI_RPA=m
-CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_NET_IPIP=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_ADVANCED is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_BLK_DEV_FD=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_VIRTIO_BLK=m
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_AMD74XX=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_CXGB3_ISCSI=m
-CONFIG_SCSI_CXGB4_ISCSI=m
-CONFIG_SCSI_BNX2_ISCSI=m
-CONFIG_BE2ISCSI=m
-CONFIG_SCSI_MPT2SAS=m
-CONFIG_SCSI_IBMVSCSI=y
-CONFIG_SCSI_IBMVFC=m
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_IPR=y
-CONFIG_SCSI_QLA_FC=m
-CONFIG_SCSI_QLA_ISCSI=m
-CONFIG_SCSI_LPFC=m
-CONFIG_SCSI_VIRTIO=m
-CONFIG_SCSI_DH=m
-CONFIG_SCSI_DH_RDAC=m
-CONFIG_SCSI_DH_ALUA=m
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-# CONFIG_ATA_SFF is not set
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID456=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_THIN_PROVISIONING=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_QL=m
-CONFIG_DM_MULTIPATH_ST=m
-CONFIG_DM_UEVENT=y
-CONFIG_BONDING=m
-CONFIG_DUMMY=m
-CONFIG_MACVLAN=m
-CONFIG_MACVTAP=m
-CONFIG_VXLAN=m
-CONFIG_NETCONSOLE=y
-CONFIG_TUN=m
-CONFIG_VETH=m
-CONFIG_VIRTIO_NET=m
-CONFIG_VHOST_NET=m
-CONFIG_VORTEX=y
-CONFIG_ACENIC=m
-CONFIG_ACENIC_OMIT_TIGON_I=y
-CONFIG_PCNET32=y
-CONFIG_TIGON3=y
-CONFIG_CHELSIO_T1=m
-CONFIG_BE2NET=m
-CONFIG_S2IO=m
-CONFIG_IBMVETH=y
-CONFIG_EHEA=y
-CONFIG_E100=y
-CONFIG_E1000=y
-CONFIG_E1000E=y
-CONFIG_IXGB=m
-CONFIG_IXGBE=m
-CONFIG_MLX4_EN=m
-CONFIG_MYRI10GE=m
-CONFIG_QLGE=m
-CONFIG_NETXEN_NIC=m
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPPOE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_PCSPKR=m
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_ICOM=m
-CONFIG_SERIAL_JSM=m
-CONFIG_HVC_CONSOLE=y
-CONFIG_HVC_RTAS=y
-CONFIG_HVCS=m
-CONFIG_VIRTIO_CONSOLE=m
-CONFIG_IBM_BSR=m
-CONFIG_GEN_RTC=y
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=1024
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_OF=y
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-CONFIG_FB_MATROX_G=y
-CONFIG_FB_RADEON=y
-CONFIG_FB_IBM_GXT4500=y
-CONFIG_LCD_PLATFORM=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB_HIDDEV=y
-CONFIG_USB=y
-CONFIG_USB_MON=m
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PPC_OF is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=m
-CONFIG_INFINIBAND=m
-CONFIG_INFINIBAND_USER_MAD=m
-CONFIG_INFINIBAND_USER_ACCESS=m
-CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INFINIBAND_EHCA=m
-CONFIG_INFINIBAND_CXGB3=m
-CONFIG_INFINIBAND_CXGB4=m
-CONFIG_MLX4_INFINIBAND=m
-CONFIG_INFINIBAND_IPOIB=m
-CONFIG_INFINIBAND_IPOIB_CM=y
-CONFIG_INFINIBAND_SRP=m
-CONFIG_INFINIBAND_ISER=m
-CONFIG_VIRTIO_PCI=m
-CONFIG_VIRTIO_BALLOON=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_REISERFS_FS=y
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_SECURITY=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_BTRFS_FS=m
-CONFIG_BTRFS_FS_POSIX_ACL=y
-CONFIG_NILFS2_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_OVERLAY_FS=m
-CONFIG_ISO9660_FS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_HUGETLBFS=y
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_SQUASHFS_XATTR=y
-CONFIG_SQUASHFS_LZO=y
-CONFIG_SQUASHFS_XZ=y
-CONFIG_PSTORE=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_CIFS=m
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-CONFIG_LOCKUP_DETECTOR=y
-CONFIG_LATENCYTOP=y
-CONFIG_SCHED_TRACER=y
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_CODE_PATCHING_SELFTEST=y
-CONFIG_FTR_FIXUP_SELFTEST=y
-CONFIG_MSI_BITMAP_SELFTEST=y
-CONFIG_XMON=y
-CONFIG_XMON_DEFAULT=y
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_LZO=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_VIRTUALIZATION=y
-CONFIG_KVM_BOOK3S_64=m
-CONFIG_KVM_BOOK3S_64_HV=m
--
1.9.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 1/2] powerpc/configs: merge pseries_defconfig and pseries_le_defconfig
2015-05-15 5:47 [PATCH 1/2] powerpc/configs: merge pseries_defconfig and pseries_le_defconfig Cyril Bur
2015-05-15 5:47 ` [PATCH 2/2] powerpc: replace pseries_le_defconfig with a Makefile target using merge_config Cyril Bur
@ 2015-05-24 1:57 ` Anton Blanchard
2015-05-24 9:19 ` Denis Kirjanov
1 sibling, 1 reply; 5+ messages in thread
From: Anton Blanchard @ 2015-05-24 1:57 UTC (permalink / raw)
To: Cyril Bur
Cc: linuxppc-dev, Michael Ellerman, Paul Mackerras, Benjamin Herrenschmidt
Hi Cyril,
> These two configs should be identical with the exception of big or
> little endian
>
> The big endian version has XMON_DEFAULT turned on while the little
> endian has XMON_DEFAULT not set. Enable XMON_DEFAULT for little
> endian.
I disabled it on the LE defconfig on purpose. In most cases we want to
get the kernel back around and running again. I got sick of building a
mainline kernel for a non development box and coming back to it stuck in
xmon.
Should we disable it by default and require developers who want xmon to
set the config option, or use the xmon=on boot?
Anton
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 1/2] powerpc/configs: merge pseries_defconfig and pseries_le_defconfig
2015-05-24 1:57 ` [PATCH 1/2] powerpc/configs: merge pseries_defconfig and pseries_le_defconfig Anton Blanchard
@ 2015-05-24 9:19 ` Denis Kirjanov
2015-05-25 0:46 ` Cyril Bur
0 siblings, 1 reply; 5+ messages in thread
From: Denis Kirjanov @ 2015-05-24 9:19 UTC (permalink / raw)
To: Anton Blanchard
Cc: Cyril Bur, linuxppc-dev, Paul Mackerras, Benjamin Herrenschmidt
On 5/24/15, Anton Blanchard <anton@samba.org> wrote:
> Hi Cyril,
>
>> These two configs should be identical with the exception of big or
>> little endian
>>
>> The big endian version has XMON_DEFAULT turned on while the little
>> endian has XMON_DEFAULT not set. Enable XMON_DEFAULT for little
>> endian.
>
> I disabled it on the LE defconfig on purpose. In most cases we want to
> get the kernel back around and running again. I got sick of building a
> mainline kernel for a non development box and coming back to it stuck in
> xmon.
>
> Should we disable it by default and require developers who want xmon to
> set the config option, or use the xmon=on boot?
I think that it's a good idea to keep it disabled by default
>
> Anton
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 1/2] powerpc/configs: merge pseries_defconfig and pseries_le_defconfig
2015-05-24 9:19 ` Denis Kirjanov
@ 2015-05-25 0:46 ` Cyril Bur
0 siblings, 0 replies; 5+ messages in thread
From: Cyril Bur @ 2015-05-25 0:46 UTC (permalink / raw)
To: Denis Kirjanov
Cc: Anton Blanchard, linuxppc-dev, Paul Mackerras, Benjamin Herrenschmidt
On Sun, 2015-05-24 at 12:19 +0300, Denis Kirjanov wrote:
> On 5/24/15, Anton Blanchard <anton@samba.org> wrote:
> > Hi Cyril,
> >
> >> These two configs should be identical with the exception of big or
> >> little endian
> >>
> >> The big endian version has XMON_DEFAULT turned on while the little
> >> endian has XMON_DEFAULT not set. Enable XMON_DEFAULT for little
> >> endian.
> >
> > I disabled it on the LE defconfig on purpose. In most cases we want to
> > get the kernel back around and running again. I got sick of building a
> > mainline kernel for a non development box and coming back to it stuck in
> > xmon.
> >
> > Should we disable it by default and require developers who want xmon to
> > set the config option, or use the xmon=on boot?
>
> I think that it's a good idea to keep it disabled by default
Sure, that behaviour makes sense since and the goal here is to have them
be the same, I'll resent the patch to go the other way and turn
XMON_DEFAULT off in big endian.
Thanks,
Cyril
> >
> > Anton
> > _______________________________________________
> > Linuxppc-dev mailing list
> > Linuxppc-dev@lists.ozlabs.org
> > https://lists.ozlabs.org/listinfo/linuxppc-dev
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2015-05-25 0:46 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-05-15 5:47 [PATCH 1/2] powerpc/configs: merge pseries_defconfig and pseries_le_defconfig Cyril Bur
2015-05-15 5:47 ` [PATCH 2/2] powerpc: replace pseries_le_defconfig with a Makefile target using merge_config Cyril Bur
2015-05-24 1:57 ` [PATCH 1/2] powerpc/configs: merge pseries_defconfig and pseries_le_defconfig Anton Blanchard
2015-05-24 9:19 ` Denis Kirjanov
2015-05-25 0:46 ` Cyril Bur
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.