[rtc-linux] [PATCH v3 0/6] Change snvs rtc and poweroff to use syscon add pwrkey driver

All of lore.kernel.org
 help / color / mirror / Atom feed

* [rtc-linux] [PATCH v3 0/6] Change snvs rtc and poweroff to use syscon add pwrkey driver
@ 2015-05-21 16:16 ` Frank.Li
  0 siblings, 0 replies; 27+ messages in thread
From: Frank.Li @ 2015-05-21 16:16 UTC (permalink / raw)
  To: lznuaa, shawn.guo, dmitry.torokhov, robh+dt, alexandre.belloni, linux
  Cc: linux-arm-kernel, linux-input, rtc-linux, devicetree, Frank Li

From: Frank Li <Frank.Li@freescale.com>

Change from v2 to v3
 - Keep snvs rtc compatiblity with old dts file
 - use general syscon-poweroff instead of modifying snvs-poweroff.c

Change from v1 to v2
 - Change simple-bus to simple-mfd
 - RTC remove lock.
 - RTC remove comments "These register offsets are relative to LP (Low Power) range"
 - power off, remove extra space

Frank Li (5):
  rtc: arm: imx: snvs: change use syscon to access register
  Document: dt: fsl: snvs: change support syscon
  arm: dts: imx: update snvs to use syscon access register
  document: devicetree: input: imx: i.mx snvs power device tree bindings
  arm: dts: imx6sx: enable snvs power key

Robin Gong (1):
  input: keyboard: imx: add snvs power key driver

 .../devicetree/bindings/crypto/fsl-sec4.txt        |  70 +++++--
 .../devicetree/bindings/input/snvs-pwrkey.txt      |   1 +
 arch/arm/boot/dts/imx6qdl.dtsi                     |  19 +-
 arch/arm/boot/dts/imx6sl.dtsi                      |  19 +-
 arch/arm/boot/dts/imx6sx.dtsi                      |  24 ++-
 arch/arm/boot/dts/vfxxx.dtsi                       |   9 +-
 drivers/input/keyboard/Kconfig                     |  11 +
 drivers/input/keyboard/Makefile                    |   1 +
 drivers/input/keyboard/snvs_pwrkey.c               | 232 +++++++++++++++++++++
 drivers/rtc/rtc-snvs.c                             | 136 ++++++------
 10 files changed, 408 insertions(+), 114 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/snvs-pwrkey.txt
 create mode 100644 drivers/input/keyboard/snvs_pwrkey.c

-- 
1.9.1

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

^ permalink raw reply	[flat|nested] 27+ messages in thread

* [PATCH v3 0/6] Change snvs rtc and poweroff to use syscon add pwrkey driver
@ 2015-05-21 16:16 ` Frank.Li
  0 siblings, 0 replies; 27+ messages in thread
From: Frank.Li @ 2015-05-21 16:16 UTC (permalink / raw)
  To: lznuaa, shawn.guo, dmitry.torokhov, robh+dt, alexandre.belloni, linux
  Cc: linux-arm-kernel, linux-input, rtc-linux, devicetree, Frank Li

From: Frank Li <Frank.Li@freescale.com>

Change from v2 to v3
 - Keep snvs rtc compatiblity with old dts file
 - use general syscon-poweroff instead of modifying snvs-poweroff.c

Change from v1 to v2
 - Change simple-bus to simple-mfd
 - RTC remove lock.
 - RTC remove comments "These register offsets are relative to LP (Low Power) range"
 - power off, remove extra space

Frank Li (5):
  rtc: arm: imx: snvs: change use syscon to access register
  Document: dt: fsl: snvs: change support syscon
  arm: dts: imx: update snvs to use syscon access register
  document: devicetree: input: imx: i.mx snvs power device tree bindings
  arm: dts: imx6sx: enable snvs power key

Robin Gong (1):
  input: keyboard: imx: add snvs power key driver

 .../devicetree/bindings/crypto/fsl-sec4.txt        |  70 +++++--
 .../devicetree/bindings/input/snvs-pwrkey.txt      |   1 +
 arch/arm/boot/dts/imx6qdl.dtsi                     |  19 +-
 arch/arm/boot/dts/imx6sl.dtsi                      |  19 +-
 arch/arm/boot/dts/imx6sx.dtsi                      |  24 ++-
 arch/arm/boot/dts/vfxxx.dtsi                       |   9 +-
 drivers/input/keyboard/Kconfig                     |  11 +
 drivers/input/keyboard/Makefile                    |   1 +
 drivers/input/keyboard/snvs_pwrkey.c               | 232 +++++++++++++++++++++
 drivers/rtc/rtc-snvs.c                             | 136 ++++++------
 10 files changed, 408 insertions(+), 114 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/snvs-pwrkey.txt
 create mode 100644 drivers/input/keyboard/snvs_pwrkey.c

-- 
1.9.1


^ permalink raw reply	[flat|nested] 27+ messages in thread

* [PATCH v3 0/6] Change snvs rtc and poweroff to use syscon add pwrkey driver
@ 2015-05-21 16:16 ` Frank.Li
  0 siblings, 0 replies; 27+ messages in thread
From: Frank.Li at freescale.com @ 2015-05-21 16:16 UTC (permalink / raw)
  To: linux-arm-kernel

From: Frank Li <Frank.Li@freescale.com>

Change from v2 to v3
 - Keep snvs rtc compatiblity with old dts file
 - use general syscon-poweroff instead of modifying snvs-poweroff.c

Change from v1 to v2
 - Change simple-bus to simple-mfd
 - RTC remove lock.
 - RTC remove comments "These register offsets are relative to LP (Low Power) range"
 - power off, remove extra space

Frank Li (5):
  rtc: arm: imx: snvs: change use syscon to access register
  Document: dt: fsl: snvs: change support syscon
  arm: dts: imx: update snvs to use syscon access register
  document: devicetree: input: imx: i.mx snvs power device tree bindings
  arm: dts: imx6sx: enable snvs power key

Robin Gong (1):
  input: keyboard: imx: add snvs power key driver

 .../devicetree/bindings/crypto/fsl-sec4.txt        |  70 +++++--
 .../devicetree/bindings/input/snvs-pwrkey.txt      |   1 +
 arch/arm/boot/dts/imx6qdl.dtsi                     |  19 +-
 arch/arm/boot/dts/imx6sl.dtsi                      |  19 +-
 arch/arm/boot/dts/imx6sx.dtsi                      |  24 ++-
 arch/arm/boot/dts/vfxxx.dtsi                       |   9 +-
 drivers/input/keyboard/Kconfig                     |  11 +
 drivers/input/keyboard/Makefile                    |   1 +
 drivers/input/keyboard/snvs_pwrkey.c               | 232 +++++++++++++++++++++
 drivers/rtc/rtc-snvs.c                             | 136 ++++++------
 10 files changed, 408 insertions(+), 114 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/snvs-pwrkey.txt
 create mode 100644 drivers/input/keyboard/snvs_pwrkey.c

-- 
1.9.1

^ permalink raw reply	[flat|nested] 27+ messages in thread

* [rtc-linux] [PATCH v3 1/6] rtc: arm: imx: snvs: change use syscon to access register
  2015-05-21 16:16 ` Frank.Li
  (?)
@ 2015-05-21 16:16   ` Frank.Li
  -1 siblings, 0 replies; 27+ messages in thread
From: Frank.Li @ 2015-05-21 16:16 UTC (permalink / raw)
  To: lznuaa, shawn.guo, dmitry.torokhov, robh+dt, alexandre.belloni, linux
  Cc: linux-arm-kernel, linux-input, rtc-linux, devicetree, Frank Li

From: Frank Li <Frank.Li@freescale.com>

snvs included rtc, on/off key, power-off module
change to syscon to access register

Signed-off-by: Frank Li <Frank.Li@freescale.com>
---
 drivers/rtc/rtc-snvs.c | 136 +++++++++++++++++++++++++------------------------
 1 file changed, 70 insertions(+), 66 deletions(-)

diff --git a/drivers/rtc/rtc-snvs.c b/drivers/rtc/rtc-snvs.c
index 0479e80..a22c8b4 100644
--- a/drivers/rtc/rtc-snvs.c
+++ b/drivers/rtc/rtc-snvs.c
@@ -18,6 +18,8 @@
 #include <linux/platform_device.h>
 #include <linux/rtc.h>
 #include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 
 /* These register offsets are relative to LP (Low Power) range */
 #define SNVS_LPCR		0x04
@@ -37,31 +39,35 @@
 
 struct snvs_rtc_data {
 	struct rtc_device *rtc;
-	void __iomem *ioaddr;
+	struct regmap *regmap;
+	int offset;
 	int irq;
-	spinlock_t lock;
 	struct clk *clk;
 };
 
-static u32 rtc_read_lp_counter(void __iomem *ioaddr)
+static u32 rtc_read_lp_counter(struct snvs_rtc_data *snvs)
 {
 	u64 read1, read2;
-
+	u32 val;
 	do {
-		read1 = readl(ioaddr + SNVS_LPSRTCMR);
+		regmap_read(snvs->regmap, snvs->offset + SNVS_LPSRTCMR, &val);
+		read1 = val;
 		read1 <<= 32;
-		read1 |= readl(ioaddr + SNVS_LPSRTCLR);
+		regmap_read(snvs->regmap, snvs->offset + SNVS_LPSRTCLR, &val);
+		read1 |= val;
 
-		read2 = readl(ioaddr + SNVS_LPSRTCMR);
+		regmap_read(snvs->regmap, snvs->offset + SNVS_LPSRTCMR, &val);
+		read2 = val;
 		read2 <<= 32;
-		read2 |= readl(ioaddr + SNVS_LPSRTCLR);
+		regmap_read(snvs->regmap, snvs->offset + SNVS_LPSRTCLR, &val);
+		read2 |= val;
 	} while (read1 != read2);
 
 	/* Convert 47-bit counter to 32-bit raw second count */
 	return (u32) (read1 >> CNTR_TO_SECS_SH);
 }
 
-static void rtc_write_sync_lp(void __iomem *ioaddr)
+static void rtc_write_sync_lp(struct snvs_rtc_data *snvs)
 {
 	u32 count1, count2, count3;
 	int i;
@@ -69,15 +75,15 @@ static void rtc_write_sync_lp(void __iomem *ioaddr)
 	/* Wait for 3 CKIL cycles */
 	for (i = 0; i < 3; i++) {
 		do {
-			count1 = readl(ioaddr + SNVS_LPSRTCLR);
-			count2 = readl(ioaddr + SNVS_LPSRTCLR);
+			regmap_read(snvs->regmap, snvs->offset + SNVS_LPSRTCLR, &count1);
+			regmap_read(snvs->regmap, snvs->offset + SNVS_LPSRTCLR, &count2);
 		} while (count1 != count2);
 
 		/* Now wait until counter value changes */
 		do {
 			do {
-				count2 = readl(ioaddr + SNVS_LPSRTCLR);
-				count3 = readl(ioaddr + SNVS_LPSRTCLR);
+				regmap_read(snvs->regmap, snvs->offset + SNVS_LPSRTCLR, &count2);
+				regmap_read(snvs->regmap, snvs->offset + SNVS_LPSRTCLR, &count3);
 			} while (count2 != count3);
 		} while (count3 == count1);
 	}
@@ -85,23 +91,14 @@ static void rtc_write_sync_lp(void __iomem *ioaddr)
 
 static int snvs_rtc_enable(struct snvs_rtc_data *data, bool enable)
 {
-	unsigned long flags;
 	int timeout = 1000;
 	u32 lpcr;
 
-	spin_lock_irqsave(&data->lock, flags);
-
-	lpcr = readl(data->ioaddr + SNVS_LPCR);
-	if (enable)
-		lpcr |= SNVS_LPCR_SRTC_ENV;
-	else
-		lpcr &= ~SNVS_LPCR_SRTC_ENV;
-	writel(lpcr, data->ioaddr + SNVS_LPCR);
-
-	spin_unlock_irqrestore(&data->lock, flags);
+	regmap_update_bits(data->regmap, data->offset + SNVS_LPCR, SNVS_LPCR_SRTC_ENV,
+			   enable ? SNVS_LPCR_SRTC_ENV : 0);
 
 	while (--timeout) {
-		lpcr = readl(data->ioaddr + SNVS_LPCR);
+		regmap_read(data->regmap, data->offset + SNVS_LPCR, &lpcr);
 
 		if (enable) {
 			if (lpcr & SNVS_LPCR_SRTC_ENV)
@@ -121,7 +118,7 @@ static int snvs_rtc_enable(struct snvs_rtc_data *data, bool enable)
 static int snvs_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
 	struct snvs_rtc_data *data = dev_get_drvdata(dev);
-	unsigned long time = rtc_read_lp_counter(data->ioaddr);
+	unsigned long time = rtc_read_lp_counter(data);
 
 	rtc_time_to_tm(time, tm);
 
@@ -139,8 +136,8 @@ static int snvs_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	snvs_rtc_enable(data, false);
 
 	/* Write 32-bit time to 47-bit timer, leaving 15 LSBs blank */
-	writel(time << CNTR_TO_SECS_SH, data->ioaddr + SNVS_LPSRTCLR);
-	writel(time >> (32 - CNTR_TO_SECS_SH), data->ioaddr + SNVS_LPSRTCMR);
+	regmap_write(data->regmap, data->offset + SNVS_LPSRTCLR, time << CNTR_TO_SECS_SH);
+	regmap_write(data->regmap, data->offset + SNVS_LPSRTCMR, time >> (32 - CNTR_TO_SECS_SH));
 
 	/* Enable RTC again */
 	snvs_rtc_enable(data, true);
@@ -153,10 +150,10 @@ static int snvs_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	struct snvs_rtc_data *data = dev_get_drvdata(dev);
 	u32 lptar, lpsr;
 
-	lptar = readl(data->ioaddr + SNVS_LPTAR);
+	regmap_read(data->regmap, data->offset + SNVS_LPTAR, &lptar);
 	rtc_time_to_tm(lptar, &alrm->time);
 
-	lpsr = readl(data->ioaddr + SNVS_LPSR);
+	regmap_read(data->regmap, data->offset + SNVS_LPSR, &lpsr);
 	alrm->pending = (lpsr & SNVS_LPSR_LPTA) ? 1 : 0;
 
 	return 0;
@@ -165,21 +162,12 @@ static int snvs_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 static int snvs_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
 {
 	struct snvs_rtc_data *data = dev_get_drvdata(dev);
-	u32 lpcr;
-	unsigned long flags;
-
-	spin_lock_irqsave(&data->lock, flags);
-
-	lpcr = readl(data->ioaddr + SNVS_LPCR);
-	if (enable)
-		lpcr |= (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN);
-	else
-		lpcr &= ~(SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN);
-	writel(lpcr, data->ioaddr + SNVS_LPCR);
 
-	spin_unlock_irqrestore(&data->lock, flags);
+	regmap_update_bits(data->regmap, data->offset + SNVS_LPCR,
+			  (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN),
+			   enable ? (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN) : 0);
 
-	rtc_write_sync_lp(data->ioaddr);
+	rtc_write_sync_lp(data);
 
 	return 0;
 }
@@ -189,24 +177,14 @@ static int snvs_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	struct snvs_rtc_data *data = dev_get_drvdata(dev);
 	struct rtc_time *alrm_tm = &alrm->time;
 	unsigned long time;
-	unsigned long flags;
-	u32 lpcr;
 
 	rtc_tm_to_time(alrm_tm, &time);
 
-	spin_lock_irqsave(&data->lock, flags);
-
-	/* Have to clear LPTA_EN before programming new alarm time in LPTAR */
-	lpcr = readl(data->ioaddr + SNVS_LPCR);
-	lpcr &= ~SNVS_LPCR_LPTA_EN;
-	writel(lpcr, data->ioaddr + SNVS_LPCR);
-
-	spin_unlock_irqrestore(&data->lock, flags);
-
-	writel(time, data->ioaddr + SNVS_LPTAR);
+	regmap_update_bits(data->regmap, data->offset + SNVS_LPCR, SNVS_LPCR_LPTA_EN, 0);
+	regmap_write(data->regmap, data->offset + SNVS_LPTAR, time);
 
 	/* Clear alarm interrupt status bit */
-	writel(SNVS_LPSR_LPTA, data->ioaddr + SNVS_LPSR);
+	regmap_write(data->regmap, data->offset + SNVS_LPSR, SNVS_LPSR_LPTA);
 
 	return snvs_rtc_alarm_irq_enable(dev, alrm->enabled);
 }
@@ -226,7 +204,7 @@ static irqreturn_t snvs_rtc_irq_handler(int irq, void *dev_id)
 	u32 lpsr;
 	u32 events = 0;
 
-	lpsr = readl(data->ioaddr + SNVS_LPSR);
+	regmap_read(data->regmap, data->offset + SNVS_LPSR, &lpsr);
 
 	if (lpsr & SNVS_LPSR_LPTA) {
 		events |= (RTC_AF | RTC_IRQF);
@@ -238,25 +216,53 @@ static irqreturn_t snvs_rtc_irq_handler(int irq, void *dev_id)
 	}
 
 	/* clear interrupt status */
-	writel(lpsr, data->ioaddr + SNVS_LPSR);
+	regmap_write(data->regmap, data->offset + SNVS_LPSR, lpsr);
 
 	return events ? IRQ_HANDLED : IRQ_NONE;
 }
 
+static const struct regmap_config snvs_rtc_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
 static int snvs_rtc_probe(struct platform_device *pdev)
 {
 	struct snvs_rtc_data *data;
 	struct resource *res;
 	int ret;
+	struct device_node *snvs_np;
+	void __iomem *mmio;
 
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	data->ioaddr = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(data->ioaddr))
-		return PTR_ERR(data->ioaddr);
+	snvs_np = of_get_parent(pdev->dev.of_node);
+	if (!snvs_np)
+		return -ENODEV;
+
+	if (of_device_is_compatible(snvs_np, "syscon")) {
+		data->regmap = syscon_node_to_regmap(snvs_np);
+		data->offset = 0x34;
+	} else {
+		pr_warning("snvs rtc: you use old dts file, please update it\n");
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+		mmio = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(mmio))
+			return PTR_ERR(mmio);
+
+		data->regmap = devm_regmap_init_mmio(&pdev->dev, mmio, &snvs_rtc_config);
+	}
+
+	of_node_put(snvs_np);
+
+	if (!data->regmap) {
+		pr_err("Can't snvs syscon\n");
+		return -ENODEV;
+	}
 
 	data->irq = platform_get_irq(pdev, 0);
 	if (data->irq < 0)
@@ -276,13 +282,11 @@ static int snvs_rtc_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, data);
 
-	spin_lock_init(&data->lock);
-
 	/* Initialize glitch detect */
-	writel(SNVS_LPPGDR_INIT, data->ioaddr + SNVS_LPPGDR);
+	regmap_write(data->regmap, data->offset + SNVS_LPPGDR, SNVS_LPPGDR_INIT);
 
 	/* Clear interrupt status */
-	writel(0xffffffff, data->ioaddr + SNVS_LPSR);
+	regmap_write(data->regmap, data->offset + SNVS_LPSR, 0xffffffff);
 
 	/* Enable RTC */
 	snvs_rtc_enable(data, true);
-- 
1.9.1

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [PATCH v3 1/6] rtc: arm: imx: snvs: change use syscon to access register
@ 2015-05-21 16:16   ` Frank.Li
  0 siblings, 0 replies; 27+ messages in thread
From: Frank.Li @ 2015-05-21 16:16 UTC (permalink / raw)
  To: lznuaa, shawn.guo, dmitry.torokhov, robh+dt, alexandre.belloni, linux
  Cc: linux-arm-kernel, linux-input, rtc-linux, devicetree, Frank Li

From: Frank Li <Frank.Li@freescale.com>

snvs included rtc, on/off key, power-off module
change to syscon to access register

Signed-off-by: Frank Li <Frank.Li@freescale.com>
---
 drivers/rtc/rtc-snvs.c | 136 +++++++++++++++++++++++++------------------------
 1 file changed, 70 insertions(+), 66 deletions(-)

diff --git a/drivers/rtc/rtc-snvs.c b/drivers/rtc/rtc-snvs.c
index 0479e80..a22c8b4 100644
--- a/drivers/rtc/rtc-snvs.c
+++ b/drivers/rtc/rtc-snvs.c
@@ -18,6 +18,8 @@
 #include <linux/platform_device.h>
 #include <linux/rtc.h>
 #include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 
 /* These register offsets are relative to LP (Low Power) range */
 #define SNVS_LPCR		0x04
@@ -37,31 +39,35 @@
 
 struct snvs_rtc_data {
 	struct rtc_device *rtc;
-	void __iomem *ioaddr;
+	struct regmap *regmap;
+	int offset;
 	int irq;
-	spinlock_t lock;
 	struct clk *clk;
 };
 
-static u32 rtc_read_lp_counter(void __iomem *ioaddr)
+static u32 rtc_read_lp_counter(struct snvs_rtc_data *snvs)
 {
 	u64 read1, read2;
-
+	u32 val;
 	do {
-		read1 = readl(ioaddr + SNVS_LPSRTCMR);
+		regmap_read(snvs->regmap, snvs->offset + SNVS_LPSRTCMR, &val);
+		read1 = val;
 		read1 <<= 32;
-		read1 |= readl(ioaddr + SNVS_LPSRTCLR);
+		regmap_read(snvs->regmap, snvs->offset + SNVS_LPSRTCLR, &val);
+		read1 |= val;
 
-		read2 = readl(ioaddr + SNVS_LPSRTCMR);
+		regmap_read(snvs->regmap, snvs->offset + SNVS_LPSRTCMR, &val);
+		read2 = val;
 		read2 <<= 32;
-		read2 |= readl(ioaddr + SNVS_LPSRTCLR);
+		regmap_read(snvs->regmap, snvs->offset + SNVS_LPSRTCLR, &val);
+		read2 |= val;
 	} while (read1 != read2);
 
 	/* Convert 47-bit counter to 32-bit raw second count */
 	return (u32) (read1 >> CNTR_TO_SECS_SH);
 }
 
-static void rtc_write_sync_lp(void __iomem *ioaddr)
+static void rtc_write_sync_lp(struct snvs_rtc_data *snvs)
 {
 	u32 count1, count2, count3;
 	int i;
@@ -69,15 +75,15 @@ static void rtc_write_sync_lp(void __iomem *ioaddr)
 	/* Wait for 3 CKIL cycles */
 	for (i = 0; i < 3; i++) {
 		do {
-			count1 = readl(ioaddr + SNVS_LPSRTCLR);
-			count2 = readl(ioaddr + SNVS_LPSRTCLR);
+			regmap_read(snvs->regmap, snvs->offset + SNVS_LPSRTCLR, &count1);
+			regmap_read(snvs->regmap, snvs->offset + SNVS_LPSRTCLR, &count2);
 		} while (count1 != count2);
 
 		/* Now wait until counter value changes */
 		do {
 			do {
-				count2 = readl(ioaddr + SNVS_LPSRTCLR);
-				count3 = readl(ioaddr + SNVS_LPSRTCLR);
+				regmap_read(snvs->regmap, snvs->offset + SNVS_LPSRTCLR, &count2);
+				regmap_read(snvs->regmap, snvs->offset + SNVS_LPSRTCLR, &count3);
 			} while (count2 != count3);
 		} while (count3 == count1);
 	}
@@ -85,23 +91,14 @@ static void rtc_write_sync_lp(void __iomem *ioaddr)
 
 static int snvs_rtc_enable(struct snvs_rtc_data *data, bool enable)
 {
-	unsigned long flags;
 	int timeout = 1000;
 	u32 lpcr;
 
-	spin_lock_irqsave(&data->lock, flags);
-
-	lpcr = readl(data->ioaddr + SNVS_LPCR);
-	if (enable)
-		lpcr |= SNVS_LPCR_SRTC_ENV;
-	else
-		lpcr &= ~SNVS_LPCR_SRTC_ENV;
-	writel(lpcr, data->ioaddr + SNVS_LPCR);
-
-	spin_unlock_irqrestore(&data->lock, flags);
+	regmap_update_bits(data->regmap, data->offset + SNVS_LPCR, SNVS_LPCR_SRTC_ENV,
+			   enable ? SNVS_LPCR_SRTC_ENV : 0);
 
 	while (--timeout) {
-		lpcr = readl(data->ioaddr + SNVS_LPCR);
+		regmap_read(data->regmap, data->offset + SNVS_LPCR, &lpcr);
 
 		if (enable) {
 			if (lpcr & SNVS_LPCR_SRTC_ENV)
@@ -121,7 +118,7 @@ static int snvs_rtc_enable(struct snvs_rtc_data *data, bool enable)
 static int snvs_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
 	struct snvs_rtc_data *data = dev_get_drvdata(dev);
-	unsigned long time = rtc_read_lp_counter(data->ioaddr);
+	unsigned long time = rtc_read_lp_counter(data);
 
 	rtc_time_to_tm(time, tm);
 
@@ -139,8 +136,8 @@ static int snvs_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	snvs_rtc_enable(data, false);
 
 	/* Write 32-bit time to 47-bit timer, leaving 15 LSBs blank */
-	writel(time << CNTR_TO_SECS_SH, data->ioaddr + SNVS_LPSRTCLR);
-	writel(time >> (32 - CNTR_TO_SECS_SH), data->ioaddr + SNVS_LPSRTCMR);
+	regmap_write(data->regmap, data->offset + SNVS_LPSRTCLR, time << CNTR_TO_SECS_SH);
+	regmap_write(data->regmap, data->offset + SNVS_LPSRTCMR, time >> (32 - CNTR_TO_SECS_SH));
 
 	/* Enable RTC again */
 	snvs_rtc_enable(data, true);
@@ -153,10 +150,10 @@ static int snvs_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	struct snvs_rtc_data *data = dev_get_drvdata(dev);
 	u32 lptar, lpsr;
 
-	lptar = readl(data->ioaddr + SNVS_LPTAR);
+	regmap_read(data->regmap, data->offset + SNVS_LPTAR, &lptar);
 	rtc_time_to_tm(lptar, &alrm->time);
 
-	lpsr = readl(data->ioaddr + SNVS_LPSR);
+	regmap_read(data->regmap, data->offset + SNVS_LPSR, &lpsr);
 	alrm->pending = (lpsr & SNVS_LPSR_LPTA) ? 1 : 0;
 
 	return 0;
@@ -165,21 +162,12 @@ static int snvs_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 static int snvs_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
 {
 	struct snvs_rtc_data *data = dev_get_drvdata(dev);
-	u32 lpcr;
-	unsigned long flags;
-
-	spin_lock_irqsave(&data->lock, flags);
-
-	lpcr = readl(data->ioaddr + SNVS_LPCR);
-	if (enable)
-		lpcr |= (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN);
-	else
-		lpcr &= ~(SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN);
-	writel(lpcr, data->ioaddr + SNVS_LPCR);
 
-	spin_unlock_irqrestore(&data->lock, flags);
+	regmap_update_bits(data->regmap, data->offset + SNVS_LPCR,
+			  (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN),
+			   enable ? (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN) : 0);
 
-	rtc_write_sync_lp(data->ioaddr);
+	rtc_write_sync_lp(data);
 
 	return 0;
 }
@@ -189,24 +177,14 @@ static int snvs_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	struct snvs_rtc_data *data = dev_get_drvdata(dev);
 	struct rtc_time *alrm_tm = &alrm->time;
 	unsigned long time;
-	unsigned long flags;
-	u32 lpcr;
 
 	rtc_tm_to_time(alrm_tm, &time);
 
-	spin_lock_irqsave(&data->lock, flags);
-
-	/* Have to clear LPTA_EN before programming new alarm time in LPTAR */
-	lpcr = readl(data->ioaddr + SNVS_LPCR);
-	lpcr &= ~SNVS_LPCR_LPTA_EN;
-	writel(lpcr, data->ioaddr + SNVS_LPCR);
-
-	spin_unlock_irqrestore(&data->lock, flags);
-
-	writel(time, data->ioaddr + SNVS_LPTAR);
+	regmap_update_bits(data->regmap, data->offset + SNVS_LPCR, SNVS_LPCR_LPTA_EN, 0);
+	regmap_write(data->regmap, data->offset + SNVS_LPTAR, time);
 
 	/* Clear alarm interrupt status bit */
-	writel(SNVS_LPSR_LPTA, data->ioaddr + SNVS_LPSR);
+	regmap_write(data->regmap, data->offset + SNVS_LPSR, SNVS_LPSR_LPTA);
 
 	return snvs_rtc_alarm_irq_enable(dev, alrm->enabled);
 }
@@ -226,7 +204,7 @@ static irqreturn_t snvs_rtc_irq_handler(int irq, void *dev_id)
 	u32 lpsr;
 	u32 events = 0;
 
-	lpsr = readl(data->ioaddr + SNVS_LPSR);
+	regmap_read(data->regmap, data->offset + SNVS_LPSR, &lpsr);
 
 	if (lpsr & SNVS_LPSR_LPTA) {
 		events |= (RTC_AF | RTC_IRQF);
@@ -238,25 +216,53 @@ static irqreturn_t snvs_rtc_irq_handler(int irq, void *dev_id)
 	}
 
 	/* clear interrupt status */
-	writel(lpsr, data->ioaddr + SNVS_LPSR);
+	regmap_write(data->regmap, data->offset + SNVS_LPSR, lpsr);
 
 	return events ? IRQ_HANDLED : IRQ_NONE;
 }
 
+static const struct regmap_config snvs_rtc_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
 static int snvs_rtc_probe(struct platform_device *pdev)
 {
 	struct snvs_rtc_data *data;
 	struct resource *res;
 	int ret;
+	struct device_node *snvs_np;
+	void __iomem *mmio;
 
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	data->ioaddr = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(data->ioaddr))
-		return PTR_ERR(data->ioaddr);
+	snvs_np = of_get_parent(pdev->dev.of_node);
+	if (!snvs_np)
+		return -ENODEV;
+
+	if (of_device_is_compatible(snvs_np, "syscon")) {
+		data->regmap = syscon_node_to_regmap(snvs_np);
+		data->offset = 0x34;
+	} else {
+		pr_warning("snvs rtc: you use old dts file, please update it\n");
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+		mmio = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(mmio))
+			return PTR_ERR(mmio);
+
+		data->regmap = devm_regmap_init_mmio(&pdev->dev, mmio, &snvs_rtc_config);
+	}
+
+	of_node_put(snvs_np);
+
+	if (!data->regmap) {
+		pr_err("Can't snvs syscon\n");
+		return -ENODEV;
+	}
 
 	data->irq = platform_get_irq(pdev, 0);
 	if (data->irq < 0)
@@ -276,13 +282,11 @@ static int snvs_rtc_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, data);
 
-	spin_lock_init(&data->lock);
-
 	/* Initialize glitch detect */
-	writel(SNVS_LPPGDR_INIT, data->ioaddr + SNVS_LPPGDR);
+	regmap_write(data->regmap, data->offset + SNVS_LPPGDR, SNVS_LPPGDR_INIT);
 
 	/* Clear interrupt status */
-	writel(0xffffffff, data->ioaddr + SNVS_LPSR);
+	regmap_write(data->regmap, data->offset + SNVS_LPSR, 0xffffffff);
 
 	/* Enable RTC */
 	snvs_rtc_enable(data, true);
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [PATCH v3 1/6] rtc: arm: imx: snvs: change use syscon to access register
@ 2015-05-21 16:16   ` Frank.Li
  0 siblings, 0 replies; 27+ messages in thread
From: Frank.Li at freescale.com @ 2015-05-21 16:16 UTC (permalink / raw)
  To: linux-arm-kernel

From: Frank Li <Frank.Li@freescale.com>

snvs included rtc, on/off key, power-off module
change to syscon to access register

Signed-off-by: Frank Li <Frank.Li@freescale.com>
---
 drivers/rtc/rtc-snvs.c | 136 +++++++++++++++++++++++++------------------------
 1 file changed, 70 insertions(+), 66 deletions(-)

diff --git a/drivers/rtc/rtc-snvs.c b/drivers/rtc/rtc-snvs.c
index 0479e80..a22c8b4 100644
--- a/drivers/rtc/rtc-snvs.c
+++ b/drivers/rtc/rtc-snvs.c
@@ -18,6 +18,8 @@
 #include <linux/platform_device.h>
 #include <linux/rtc.h>
 #include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 
 /* These register offsets are relative to LP (Low Power) range */
 #define SNVS_LPCR		0x04
@@ -37,31 +39,35 @@
 
 struct snvs_rtc_data {
 	struct rtc_device *rtc;
-	void __iomem *ioaddr;
+	struct regmap *regmap;
+	int offset;
 	int irq;
-	spinlock_t lock;
 	struct clk *clk;
 };
 
-static u32 rtc_read_lp_counter(void __iomem *ioaddr)
+static u32 rtc_read_lp_counter(struct snvs_rtc_data *snvs)
 {
 	u64 read1, read2;
-
+	u32 val;
 	do {
-		read1 = readl(ioaddr + SNVS_LPSRTCMR);
+		regmap_read(snvs->regmap, snvs->offset + SNVS_LPSRTCMR, &val);
+		read1 = val;
 		read1 <<= 32;
-		read1 |= readl(ioaddr + SNVS_LPSRTCLR);
+		regmap_read(snvs->regmap, snvs->offset + SNVS_LPSRTCLR, &val);
+		read1 |= val;
 
-		read2 = readl(ioaddr + SNVS_LPSRTCMR);
+		regmap_read(snvs->regmap, snvs->offset + SNVS_LPSRTCMR, &val);
+		read2 = val;
 		read2 <<= 32;
-		read2 |= readl(ioaddr + SNVS_LPSRTCLR);
+		regmap_read(snvs->regmap, snvs->offset + SNVS_LPSRTCLR, &val);
+		read2 |= val;
 	} while (read1 != read2);
 
 	/* Convert 47-bit counter to 32-bit raw second count */
 	return (u32) (read1 >> CNTR_TO_SECS_SH);
 }
 
-static void rtc_write_sync_lp(void __iomem *ioaddr)
+static void rtc_write_sync_lp(struct snvs_rtc_data *snvs)
 {
 	u32 count1, count2, count3;
 	int i;
@@ -69,15 +75,15 @@ static void rtc_write_sync_lp(void __iomem *ioaddr)
 	/* Wait for 3 CKIL cycles */
 	for (i = 0; i < 3; i++) {
 		do {
-			count1 = readl(ioaddr + SNVS_LPSRTCLR);
-			count2 = readl(ioaddr + SNVS_LPSRTCLR);
+			regmap_read(snvs->regmap, snvs->offset + SNVS_LPSRTCLR, &count1);
+			regmap_read(snvs->regmap, snvs->offset + SNVS_LPSRTCLR, &count2);
 		} while (count1 != count2);
 
 		/* Now wait until counter value changes */
 		do {
 			do {
-				count2 = readl(ioaddr + SNVS_LPSRTCLR);
-				count3 = readl(ioaddr + SNVS_LPSRTCLR);
+				regmap_read(snvs->regmap, snvs->offset + SNVS_LPSRTCLR, &count2);
+				regmap_read(snvs->regmap, snvs->offset + SNVS_LPSRTCLR, &count3);
 			} while (count2 != count3);
 		} while (count3 == count1);
 	}
@@ -85,23 +91,14 @@ static void rtc_write_sync_lp(void __iomem *ioaddr)
 
 static int snvs_rtc_enable(struct snvs_rtc_data *data, bool enable)
 {
-	unsigned long flags;
 	int timeout = 1000;
 	u32 lpcr;
 
-	spin_lock_irqsave(&data->lock, flags);
-
-	lpcr = readl(data->ioaddr + SNVS_LPCR);
-	if (enable)
-		lpcr |= SNVS_LPCR_SRTC_ENV;
-	else
-		lpcr &= ~SNVS_LPCR_SRTC_ENV;
-	writel(lpcr, data->ioaddr + SNVS_LPCR);
-
-	spin_unlock_irqrestore(&data->lock, flags);
+	regmap_update_bits(data->regmap, data->offset + SNVS_LPCR, SNVS_LPCR_SRTC_ENV,
+			   enable ? SNVS_LPCR_SRTC_ENV : 0);
 
 	while (--timeout) {
-		lpcr = readl(data->ioaddr + SNVS_LPCR);
+		regmap_read(data->regmap, data->offset + SNVS_LPCR, &lpcr);
 
 		if (enable) {
 			if (lpcr & SNVS_LPCR_SRTC_ENV)
@@ -121,7 +118,7 @@ static int snvs_rtc_enable(struct snvs_rtc_data *data, bool enable)
 static int snvs_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
 	struct snvs_rtc_data *data = dev_get_drvdata(dev);
-	unsigned long time = rtc_read_lp_counter(data->ioaddr);
+	unsigned long time = rtc_read_lp_counter(data);
 
 	rtc_time_to_tm(time, tm);
 
@@ -139,8 +136,8 @@ static int snvs_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	snvs_rtc_enable(data, false);
 
 	/* Write 32-bit time to 47-bit timer, leaving 15 LSBs blank */
-	writel(time << CNTR_TO_SECS_SH, data->ioaddr + SNVS_LPSRTCLR);
-	writel(time >> (32 - CNTR_TO_SECS_SH), data->ioaddr + SNVS_LPSRTCMR);
+	regmap_write(data->regmap, data->offset + SNVS_LPSRTCLR, time << CNTR_TO_SECS_SH);
+	regmap_write(data->regmap, data->offset + SNVS_LPSRTCMR, time >> (32 - CNTR_TO_SECS_SH));
 
 	/* Enable RTC again */
 	snvs_rtc_enable(data, true);
@@ -153,10 +150,10 @@ static int snvs_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	struct snvs_rtc_data *data = dev_get_drvdata(dev);
 	u32 lptar, lpsr;
 
-	lptar = readl(data->ioaddr + SNVS_LPTAR);
+	regmap_read(data->regmap, data->offset + SNVS_LPTAR, &lptar);
 	rtc_time_to_tm(lptar, &alrm->time);
 
-	lpsr = readl(data->ioaddr + SNVS_LPSR);
+	regmap_read(data->regmap, data->offset + SNVS_LPSR, &lpsr);
 	alrm->pending = (lpsr & SNVS_LPSR_LPTA) ? 1 : 0;
 
 	return 0;
@@ -165,21 +162,12 @@ static int snvs_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 static int snvs_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
 {
 	struct snvs_rtc_data *data = dev_get_drvdata(dev);
-	u32 lpcr;
-	unsigned long flags;
-
-	spin_lock_irqsave(&data->lock, flags);
-
-	lpcr = readl(data->ioaddr + SNVS_LPCR);
-	if (enable)
-		lpcr |= (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN);
-	else
-		lpcr &= ~(SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN);
-	writel(lpcr, data->ioaddr + SNVS_LPCR);
 
-	spin_unlock_irqrestore(&data->lock, flags);
+	regmap_update_bits(data->regmap, data->offset + SNVS_LPCR,
+			  (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN),
+			   enable ? (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN) : 0);
 
-	rtc_write_sync_lp(data->ioaddr);
+	rtc_write_sync_lp(data);
 
 	return 0;
 }
@@ -189,24 +177,14 @@ static int snvs_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	struct snvs_rtc_data *data = dev_get_drvdata(dev);
 	struct rtc_time *alrm_tm = &alrm->time;
 	unsigned long time;
-	unsigned long flags;
-	u32 lpcr;
 
 	rtc_tm_to_time(alrm_tm, &time);
 
-	spin_lock_irqsave(&data->lock, flags);
-
-	/* Have to clear LPTA_EN before programming new alarm time in LPTAR */
-	lpcr = readl(data->ioaddr + SNVS_LPCR);
-	lpcr &= ~SNVS_LPCR_LPTA_EN;
-	writel(lpcr, data->ioaddr + SNVS_LPCR);
-
-	spin_unlock_irqrestore(&data->lock, flags);
-
-	writel(time, data->ioaddr + SNVS_LPTAR);
+	regmap_update_bits(data->regmap, data->offset + SNVS_LPCR, SNVS_LPCR_LPTA_EN, 0);
+	regmap_write(data->regmap, data->offset + SNVS_LPTAR, time);
 
 	/* Clear alarm interrupt status bit */
-	writel(SNVS_LPSR_LPTA, data->ioaddr + SNVS_LPSR);
+	regmap_write(data->regmap, data->offset + SNVS_LPSR, SNVS_LPSR_LPTA);
 
 	return snvs_rtc_alarm_irq_enable(dev, alrm->enabled);
 }
@@ -226,7 +204,7 @@ static irqreturn_t snvs_rtc_irq_handler(int irq, void *dev_id)
 	u32 lpsr;
 	u32 events = 0;
 
-	lpsr = readl(data->ioaddr + SNVS_LPSR);
+	regmap_read(data->regmap, data->offset + SNVS_LPSR, &lpsr);
 
 	if (lpsr & SNVS_LPSR_LPTA) {
 		events |= (RTC_AF | RTC_IRQF);
@@ -238,25 +216,53 @@ static irqreturn_t snvs_rtc_irq_handler(int irq, void *dev_id)
 	}
 
 	/* clear interrupt status */
-	writel(lpsr, data->ioaddr + SNVS_LPSR);
+	regmap_write(data->regmap, data->offset + SNVS_LPSR, lpsr);
 
 	return events ? IRQ_HANDLED : IRQ_NONE;
 }
 
+static const struct regmap_config snvs_rtc_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
 static int snvs_rtc_probe(struct platform_device *pdev)
 {
 	struct snvs_rtc_data *data;
 	struct resource *res;
 	int ret;
+	struct device_node *snvs_np;
+	void __iomem *mmio;
 
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	data->ioaddr = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(data->ioaddr))
-		return PTR_ERR(data->ioaddr);
+	snvs_np = of_get_parent(pdev->dev.of_node);
+	if (!snvs_np)
+		return -ENODEV;
+
+	if (of_device_is_compatible(snvs_np, "syscon")) {
+		data->regmap = syscon_node_to_regmap(snvs_np);
+		data->offset = 0x34;
+	} else {
+		pr_warning("snvs rtc: you use old dts file, please update it\n");
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+		mmio = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(mmio))
+			return PTR_ERR(mmio);
+
+		data->regmap = devm_regmap_init_mmio(&pdev->dev, mmio, &snvs_rtc_config);
+	}
+
+	of_node_put(snvs_np);
+
+	if (!data->regmap) {
+		pr_err("Can't snvs syscon\n");
+		return -ENODEV;
+	}
 
 	data->irq = platform_get_irq(pdev, 0);
 	if (data->irq < 0)
@@ -276,13 +282,11 @@ static int snvs_rtc_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, data);
 
-	spin_lock_init(&data->lock);
-
 	/* Initialize glitch detect */
-	writel(SNVS_LPPGDR_INIT, data->ioaddr + SNVS_LPPGDR);
+	regmap_write(data->regmap, data->offset + SNVS_LPPGDR, SNVS_LPPGDR_INIT);
 
 	/* Clear interrupt status */
-	writel(0xffffffff, data->ioaddr + SNVS_LPSR);
+	regmap_write(data->regmap, data->offset + SNVS_LPSR, 0xffffffff);
 
 	/* Enable RTC */
 	snvs_rtc_enable(data, true);
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [rtc-linux] [PATCH v3 2/6] Document: dt: fsl: snvs: change support syscon
@ 2015-05-21 16:16   ` Frank.Li-KZfg59tc24xl57MIdRCFDg
  0 siblings, 0 replies; 27+ messages in thread
From: Frank.Li @ 2015-05-21 16:16 UTC (permalink / raw)
  To: lznuaa, shawn.guo, dmitry.torokhov, robh+dt, alexandre.belloni, linux
  Cc: linux-arm-kernel, linux-input, rtc-linux, devicetree, Frank Li

From: Frank Li <Frank.Li@freescale.com>

snvs actually is multi fucntion driver.
Change to use syscon to access register.

Signed-off-by: Frank Li <Frank.Li@freescale.com>
---
 .../devicetree/bindings/crypto/fsl-sec4.txt        | 28 ++++++++++++----------
 1 file changed, 15 insertions(+), 13 deletions(-)

diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
index e402277..87f5921 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
@@ -288,12 +288,13 @@ Secure Non-Volatile Storage (SNVS) Node
     Node defines address range and the associated
     interrupt for the SNVS function.  This function
     monitors security state information & reports
-    security violations.
+    security violations. This also included rtc,
+    system power off and ON/OFF key.
 
   - compatible
       Usage: required
       Value type: <string>
-      Definition: Must include "fsl,sec-v4.0-mon".
+      Definition: Must include "fsl,sec-v4.0-mon" and "syscon".
 
   - reg
       Usage: required
@@ -324,7 +325,7 @@ Secure Non-Volatile Storage (SNVS) Node
            the child address, parent address, & length.
 
    - interrupts
-      Usage: required
+      Usage: optional
       Value type: <prop_encoded-array>
       Definition:  Specifies the interrupts generated by this
            device.  The value of the interrupts property
@@ -341,7 +342,7 @@ Secure Non-Volatile Storage (SNVS) Node
 
 EXAMPLE
 	sec_mon@314000 {
-		compatible = "fsl,sec-v4.0-mon";
+		compatible = "fsl,sec-v4.0-mon", "syscon";
 		reg = <0x314000 0x1000>;
 		ranges = <0 0x314000 0x1000>;
 		interrupt-parent = <&mpic>;
@@ -358,16 +359,19 @@ Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node
       Value type: <string>
       Definition: Must include "fsl,sec-v4.0-mon-rtc-lp".
 
-  - reg
+  - interrupts
       Usage: required
-      Value type: <prop-encoded-array>
-      Definition: A standard property.  Specifies the physical
-          address and length of the SNVS LP configuration registers.
+      Value type: <prop_encoded-array>
+      Definition: Specifies the interrupts generated by this
+	   device.  The value of the interrupts property
+	   consists of one interrupt specifier. The format
+	   of the specifier is defined by the binding document
+	   describing the node's interrupt parent.
 
 EXAMPLE
-	sec_mon_rtc_lp@314000 {
+	sec_mon_rtc_lp@1 {
 		compatible = "fsl,sec-v4.0-mon-rtc-lp";
-		reg = <0x34 0x58>;
+		interrupts = <93 2>;
 	};
 
 =====================================================================
@@ -443,12 +447,10 @@ FULL EXAMPLE
 		compatible = "fsl,sec-v4.0-mon";
 		reg = <0x314000 0x1000>;
 		ranges = <0 0x314000 0x1000>;
-		interrupt-parent = <&mpic>;
-		interrupts = <93 2>;
 
 		sec_mon_rtc_lp@34 {
 			compatible = "fsl,sec-v4.0-mon-rtc-lp";
-			reg = <0x34 0x58>;
+			interrupts = <93 2>;
 		};
 	};
 
-- 
1.9.1

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [PATCH v3 2/6] Document: dt: fsl: snvs: change support syscon
@ 2015-05-21 16:16   ` Frank.Li-KZfg59tc24xl57MIdRCFDg
  0 siblings, 0 replies; 27+ messages in thread
From: Frank.Li-KZfg59tc24xl57MIdRCFDg @ 2015-05-21 16:16 UTC (permalink / raw)
  To: lznuaa-Re5JQEeQqe8AvxtiuMwx3w, shawn.guo-QSEj5FYQhm4dnm+yROfE0A,
	dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w,
	robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
	alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8,
	linux-lFZ/pmaqli7XmaaqVzeoHQ
  Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-input-u79uwXL29TY76Z2rM5mHXA,
	rtc-linux-/JYPxA39Uh5TLH3MbocFFw,
	devicetree-u79uwXL29TY76Z2rM5mHXA, Frank Li

From: Frank Li <Frank.Li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>

snvs actually is multi fucntion driver.
Change to use syscon to access register.

Signed-off-by: Frank Li <Frank.Li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 .../devicetree/bindings/crypto/fsl-sec4.txt        | 28 ++++++++++++----------
 1 file changed, 15 insertions(+), 13 deletions(-)

diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
index e402277..87f5921 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
@@ -288,12 +288,13 @@ Secure Non-Volatile Storage (SNVS) Node
     Node defines address range and the associated
     interrupt for the SNVS function.  This function
     monitors security state information & reports
-    security violations.
+    security violations. This also included rtc,
+    system power off and ON/OFF key.
 
   - compatible
       Usage: required
       Value type: <string>
-      Definition: Must include "fsl,sec-v4.0-mon".
+      Definition: Must include "fsl,sec-v4.0-mon" and "syscon".
 
   - reg
       Usage: required
@@ -324,7 +325,7 @@ Secure Non-Volatile Storage (SNVS) Node
            the child address, parent address, & length.
 
    - interrupts
-      Usage: required
+      Usage: optional
       Value type: <prop_encoded-array>
       Definition:  Specifies the interrupts generated by this
            device.  The value of the interrupts property
@@ -341,7 +342,7 @@ Secure Non-Volatile Storage (SNVS) Node
 
 EXAMPLE
 	sec_mon@314000 {
-		compatible = "fsl,sec-v4.0-mon";
+		compatible = "fsl,sec-v4.0-mon", "syscon";
 		reg = <0x314000 0x1000>;
 		ranges = <0 0x314000 0x1000>;
 		interrupt-parent = <&mpic>;
@@ -358,16 +359,19 @@ Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node
       Value type: <string>
       Definition: Must include "fsl,sec-v4.0-mon-rtc-lp".
 
-  - reg
+  - interrupts
       Usage: required
-      Value type: <prop-encoded-array>
-      Definition: A standard property.  Specifies the physical
-          address and length of the SNVS LP configuration registers.
+      Value type: <prop_encoded-array>
+      Definition: Specifies the interrupts generated by this
+	   device.  The value of the interrupts property
+	   consists of one interrupt specifier. The format
+	   of the specifier is defined by the binding document
+	   describing the node's interrupt parent.
 
 EXAMPLE
-	sec_mon_rtc_lp@314000 {
+	sec_mon_rtc_lp@1 {
 		compatible = "fsl,sec-v4.0-mon-rtc-lp";
-		reg = <0x34 0x58>;
+		interrupts = <93 2>;
 	};
 
 =====================================================================
@@ -443,12 +447,10 @@ FULL EXAMPLE
 		compatible = "fsl,sec-v4.0-mon";
 		reg = <0x314000 0x1000>;
 		ranges = <0 0x314000 0x1000>;
-		interrupt-parent = <&mpic>;
-		interrupts = <93 2>;
 
 		sec_mon_rtc_lp@34 {
 			compatible = "fsl,sec-v4.0-mon-rtc-lp";
-			reg = <0x34 0x58>;
+			interrupts = <93 2>;
 		};
 	};
 
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [PATCH v3 2/6] Document: dt: fsl: snvs: change support syscon
@ 2015-05-21 16:16   ` Frank.Li-KZfg59tc24xl57MIdRCFDg
  0 siblings, 0 replies; 27+ messages in thread
From: Frank.Li at freescale.com @ 2015-05-21 16:16 UTC (permalink / raw)
  To: linux-arm-kernel

From: Frank Li <Frank.Li@freescale.com>

snvs actually is multi fucntion driver.
Change to use syscon to access register.

Signed-off-by: Frank Li <Frank.Li@freescale.com>
---
 .../devicetree/bindings/crypto/fsl-sec4.txt        | 28 ++++++++++++----------
 1 file changed, 15 insertions(+), 13 deletions(-)

diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
index e402277..87f5921 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
@@ -288,12 +288,13 @@ Secure Non-Volatile Storage (SNVS) Node
     Node defines address range and the associated
     interrupt for the SNVS function.  This function
     monitors security state information & reports
-    security violations.
+    security violations. This also included rtc,
+    system power off and ON/OFF key.
 
   - compatible
       Usage: required
       Value type: <string>
-      Definition: Must include "fsl,sec-v4.0-mon".
+      Definition: Must include "fsl,sec-v4.0-mon" and "syscon".
 
   - reg
       Usage: required
@@ -324,7 +325,7 @@ Secure Non-Volatile Storage (SNVS) Node
            the child address, parent address, & length.
 
    - interrupts
-      Usage: required
+      Usage: optional
       Value type: <prop_encoded-array>
       Definition:  Specifies the interrupts generated by this
            device.  The value of the interrupts property
@@ -341,7 +342,7 @@ Secure Non-Volatile Storage (SNVS) Node
 
 EXAMPLE
 	sec_mon at 314000 {
-		compatible = "fsl,sec-v4.0-mon";
+		compatible = "fsl,sec-v4.0-mon", "syscon";
 		reg = <0x314000 0x1000>;
 		ranges = <0 0x314000 0x1000>;
 		interrupt-parent = <&mpic>;
@@ -358,16 +359,19 @@ Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node
       Value type: <string>
       Definition: Must include "fsl,sec-v4.0-mon-rtc-lp".
 
-  - reg
+  - interrupts
       Usage: required
-      Value type: <prop-encoded-array>
-      Definition: A standard property.  Specifies the physical
-          address and length of the SNVS LP configuration registers.
+      Value type: <prop_encoded-array>
+      Definition: Specifies the interrupts generated by this
+	   device.  The value of the interrupts property
+	   consists of one interrupt specifier. The format
+	   of the specifier is defined by the binding document
+	   describing the node's interrupt parent.
 
 EXAMPLE
-	sec_mon_rtc_lp at 314000 {
+	sec_mon_rtc_lp at 1 {
 		compatible = "fsl,sec-v4.0-mon-rtc-lp";
-		reg = <0x34 0x58>;
+		interrupts = <93 2>;
 	};
 
 =====================================================================
@@ -443,12 +447,10 @@ FULL EXAMPLE
 		compatible = "fsl,sec-v4.0-mon";
 		reg = <0x314000 0x1000>;
 		ranges = <0 0x314000 0x1000>;
-		interrupt-parent = <&mpic>;
-		interrupts = <93 2>;
 
 		sec_mon_rtc_lp at 34 {
 			compatible = "fsl,sec-v4.0-mon-rtc-lp";
-			reg = <0x34 0x58>;
+			interrupts = <93 2>;
 		};
 	};
 
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [rtc-linux] [PATCH v3 3/6] arm: dts: imx: update snvs to use syscon access register
  2015-05-21 16:16 ` Frank.Li
  (?)
@ 2015-05-21 16:16   ` Frank.Li
  -1 siblings, 0 replies; 27+ messages in thread
From: Frank.Li @ 2015-05-21 16:16 UTC (permalink / raw)
  To: lznuaa, shawn.guo, dmitry.torokhov, robh+dt, alexandre.belloni, linux
  Cc: linux-arm-kernel, linux-input, rtc-linux, devicetree, Frank Li

From: Frank Li <Frank.Li@freescale.com>

snvs is MFP device. Change dts to use syscon to allocate register resource.
snvs power off also switch to common syscon-poweroff

Signed-off-by: Frank Li <Frank.Li@freescale.com>
---
 arch/arm/boot/dts/imx6qdl.dtsi | 19 +++++++++----------
 arch/arm/boot/dts/imx6sl.dtsi  | 19 +++++++++----------
 arch/arm/boot/dts/imx6sx.dtsi  | 17 ++++++++---------
 arch/arm/boot/dts/vfxxx.dtsi   |  9 +++------
 4 files changed, 29 insertions(+), 35 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 0482a66..4f3f5f4 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -686,22 +686,21 @@
 				fsl,anatop = <&anatop>;
 			};
 
-			snvs@020cc000 {
-				compatible = "fsl,sec-v4.0-mon", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x020cc000 0x4000>;
+			snvs:snvs@020cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon",  "simple-mfd";
+				reg = <0x020cc000 0x4000>;
 
-				snvs_rtc: snvs-rtc-lp@34 {
+				snvs_rtc: snvs-rtc-lp {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					reg = <0x34 0x58>;
 					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
 						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				snvs_poweroff: snvs-poweroff@38 {
-					compatible = "fsl,sec-v4.0-poweroff";
-					reg = <0x38 0x4>;
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x60>;
 					status = "disabled";
 				};
 			};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index a78e715..2de6d46 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -563,22 +563,21 @@
 				fsl,anatop = <&anatop>;
 			};
 
-			snvs@020cc000 {
-				compatible = "fsl,sec-v4.0-mon", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x020cc000 0x4000>;
+			snvs:snvs@020cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
 
-				snvs_rtc: snvs-rtc-lp@34 {
+				snvs_rtc: snvs-rtc-lp {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					reg = <0x34 0x58>;
 					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
 						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				snvs_poweroff: snvs-poweroff@38 {
-					compatible = "fsl,sec-v4.0-poweroff";
-					reg = <0x38 0x4>;
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x60>;
 					status = "disabled";
 				};
 			};
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 708175d..3cb3b5b 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -662,20 +662,19 @@
 			};
 
 			snvs: snvs@020cc000 {
-				compatible = "fsl,sec-v4.0-mon", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x020cc000 0x4000>;
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
 
-				snvs_rtc: snvs-rtc-lp@34 {
+				snvs_rtc: snvs-rtc-lp {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					reg = <0x34 0x58>;
 					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				snvs_poweroff: snvs-poweroff@38 {
-					compatible = "fsl,sec-v4.0-poweroff";
-					reg = <0x38 0x4>;
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x60>;
 					status = "disabled";
 				};
 			};
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 4aa3351..fccfc01 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -404,14 +404,11 @@
 			};
 
 			snvs0: snvs@400a7000 {
-			    compatible = "fsl,sec-v4.0-mon", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x400a7000 0x2000>;
+			    compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x400a7000 0x2000>;
 
-				snvsrtc: snvs-rtc-lp@34 {
+				snvsrtc: snvs-rtc-lp {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					reg = <0x34 0x58>;
 					interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks VF610_CLK_SNVS>;
 					clock-names = "snvs-rtc";
-- 
1.9.1

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [PATCH v3 3/6] arm: dts: imx: update snvs to use syscon access register
@ 2015-05-21 16:16   ` Frank.Li
  0 siblings, 0 replies; 27+ messages in thread
From: Frank.Li @ 2015-05-21 16:16 UTC (permalink / raw)
  To: lznuaa, shawn.guo, dmitry.torokhov, robh+dt, alexandre.belloni, linux
  Cc: linux-arm-kernel, linux-input, rtc-linux, devicetree, Frank Li

From: Frank Li <Frank.Li@freescale.com>

snvs is MFP device. Change dts to use syscon to allocate register resource.
snvs power off also switch to common syscon-poweroff

Signed-off-by: Frank Li <Frank.Li@freescale.com>
---
 arch/arm/boot/dts/imx6qdl.dtsi | 19 +++++++++----------
 arch/arm/boot/dts/imx6sl.dtsi  | 19 +++++++++----------
 arch/arm/boot/dts/imx6sx.dtsi  | 17 ++++++++---------
 arch/arm/boot/dts/vfxxx.dtsi   |  9 +++------
 4 files changed, 29 insertions(+), 35 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 0482a66..4f3f5f4 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -686,22 +686,21 @@
 				fsl,anatop = <&anatop>;
 			};
 
-			snvs@020cc000 {
-				compatible = "fsl,sec-v4.0-mon", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x020cc000 0x4000>;
+			snvs:snvs@020cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon",  "simple-mfd";
+				reg = <0x020cc000 0x4000>;
 
-				snvs_rtc: snvs-rtc-lp@34 {
+				snvs_rtc: snvs-rtc-lp {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					reg = <0x34 0x58>;
 					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
 						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				snvs_poweroff: snvs-poweroff@38 {
-					compatible = "fsl,sec-v4.0-poweroff";
-					reg = <0x38 0x4>;
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x60>;
 					status = "disabled";
 				};
 			};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index a78e715..2de6d46 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -563,22 +563,21 @@
 				fsl,anatop = <&anatop>;
 			};
 
-			snvs@020cc000 {
-				compatible = "fsl,sec-v4.0-mon", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x020cc000 0x4000>;
+			snvs:snvs@020cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
 
-				snvs_rtc: snvs-rtc-lp@34 {
+				snvs_rtc: snvs-rtc-lp {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					reg = <0x34 0x58>;
 					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
 						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				snvs_poweroff: snvs-poweroff@38 {
-					compatible = "fsl,sec-v4.0-poweroff";
-					reg = <0x38 0x4>;
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x60>;
 					status = "disabled";
 				};
 			};
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 708175d..3cb3b5b 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -662,20 +662,19 @@
 			};
 
 			snvs: snvs@020cc000 {
-				compatible = "fsl,sec-v4.0-mon", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x020cc000 0x4000>;
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
 
-				snvs_rtc: snvs-rtc-lp@34 {
+				snvs_rtc: snvs-rtc-lp {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					reg = <0x34 0x58>;
 					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				snvs_poweroff: snvs-poweroff@38 {
-					compatible = "fsl,sec-v4.0-poweroff";
-					reg = <0x38 0x4>;
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x60>;
 					status = "disabled";
 				};
 			};
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 4aa3351..fccfc01 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -404,14 +404,11 @@
 			};
 
 			snvs0: snvs@400a7000 {
-			    compatible = "fsl,sec-v4.0-mon", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x400a7000 0x2000>;
+			    compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x400a7000 0x2000>;
 
-				snvsrtc: snvs-rtc-lp@34 {
+				snvsrtc: snvs-rtc-lp {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					reg = <0x34 0x58>;
 					interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks VF610_CLK_SNVS>;
 					clock-names = "snvs-rtc";
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [PATCH v3 3/6] arm: dts: imx: update snvs to use syscon access register
@ 2015-05-21 16:16   ` Frank.Li
  0 siblings, 0 replies; 27+ messages in thread
From: Frank.Li at freescale.com @ 2015-05-21 16:16 UTC (permalink / raw)
  To: linux-arm-kernel

From: Frank Li <Frank.Li@freescale.com>

snvs is MFP device. Change dts to use syscon to allocate register resource.
snvs power off also switch to common syscon-poweroff

Signed-off-by: Frank Li <Frank.Li@freescale.com>
---
 arch/arm/boot/dts/imx6qdl.dtsi | 19 +++++++++----------
 arch/arm/boot/dts/imx6sl.dtsi  | 19 +++++++++----------
 arch/arm/boot/dts/imx6sx.dtsi  | 17 ++++++++---------
 arch/arm/boot/dts/vfxxx.dtsi   |  9 +++------
 4 files changed, 29 insertions(+), 35 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 0482a66..4f3f5f4 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -686,22 +686,21 @@
 				fsl,anatop = <&anatop>;
 			};
 
-			snvs at 020cc000 {
-				compatible = "fsl,sec-v4.0-mon", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x020cc000 0x4000>;
+			snvs:snvs at 020cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon",  "simple-mfd";
+				reg = <0x020cc000 0x4000>;
 
-				snvs_rtc: snvs-rtc-lp at 34 {
+				snvs_rtc: snvs-rtc-lp {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					reg = <0x34 0x58>;
 					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
 						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				snvs_poweroff: snvs-poweroff at 38 {
-					compatible = "fsl,sec-v4.0-poweroff";
-					reg = <0x38 0x4>;
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x60>;
 					status = "disabled";
 				};
 			};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index a78e715..2de6d46 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -563,22 +563,21 @@
 				fsl,anatop = <&anatop>;
 			};
 
-			snvs at 020cc000 {
-				compatible = "fsl,sec-v4.0-mon", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x020cc000 0x4000>;
+			snvs:snvs at 020cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
 
-				snvs_rtc: snvs-rtc-lp at 34 {
+				snvs_rtc: snvs-rtc-lp {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					reg = <0x34 0x58>;
 					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
 						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				snvs_poweroff: snvs-poweroff at 38 {
-					compatible = "fsl,sec-v4.0-poweroff";
-					reg = <0x38 0x4>;
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x60>;
 					status = "disabled";
 				};
 			};
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 708175d..3cb3b5b 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -662,20 +662,19 @@
 			};
 
 			snvs: snvs at 020cc000 {
-				compatible = "fsl,sec-v4.0-mon", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x020cc000 0x4000>;
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
 
-				snvs_rtc: snvs-rtc-lp at 34 {
+				snvs_rtc: snvs-rtc-lp {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					reg = <0x34 0x58>;
 					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				snvs_poweroff: snvs-poweroff at 38 {
-					compatible = "fsl,sec-v4.0-poweroff";
-					reg = <0x38 0x4>;
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x60>;
 					status = "disabled";
 				};
 			};
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 4aa3351..fccfc01 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -404,14 +404,11 @@
 			};
 
 			snvs0: snvs at 400a7000 {
-			    compatible = "fsl,sec-v4.0-mon", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x400a7000 0x2000>;
+			    compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x400a7000 0x2000>;
 
-				snvsrtc: snvs-rtc-lp at 34 {
+				snvsrtc: snvs-rtc-lp {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					reg = <0x34 0x58>;
 					interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks VF610_CLK_SNVS>;
 					clock-names = "snvs-rtc";
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [rtc-linux] [PATCH v3 4/6] input: keyboard: imx: add snvs power key driver
  2015-05-21 16:16 ` Frank.Li
  (?)
@ 2015-05-21 16:16   ` Frank.Li
  -1 siblings, 0 replies; 27+ messages in thread
From: Frank.Li @ 2015-05-21 16:16 UTC (permalink / raw)
  To: lznuaa, shawn.guo, dmitry.torokhov, robh+dt, alexandre.belloni, linux
  Cc: linux-arm-kernel, linux-input, rtc-linux, devicetree, Robin Gong,
	Frank Li

From: Robin Gong <b38343@freescale.com>

add snvs power key driver.
It work in imx chips after i.mx6sx

ON/OFF key used power on/off whole system.
This driver make it wakeup from suspend state when short press
ON/OFF key.

Long time press will trig SNVS power off chip without software
intervention.

Signed-off-by: Robin Gong <b38343@freescale.com>
Signed-off-by: Frank Li <Frank.Li@freescale.com>
---
 drivers/input/keyboard/Kconfig       |  11 ++
 drivers/input/keyboard/Makefile      |   1 +
 drivers/input/keyboard/snvs_pwrkey.c | 232 +++++++++++++++++++++++++++++++++++
 3 files changed, 244 insertions(+)
 create mode 100644 drivers/input/keyboard/snvs_pwrkey.c

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 106fbac..61b3fab 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -400,6 +400,17 @@ config KEYBOARD_MPR121
 	  To compile this driver as a module, choose M here: the
 	  module will be called mpr121_touchkey.
 
+config KEYBOARD_SNVS_PWRKEY
+	tristate "IMX SNVS Power Key Driver"
+	depends on SOC_IMX6SX
+	depends on OF
+	help
+	  This is the snvs powerkey driver for the Freescale i.MX application
+	  processors that are newer than i.MX6 SX.
+
+	  To compile this driver as a module, choose M here; the
+	  module will be called snvs_pwrkey.
+
 config KEYBOARD_IMX
 	tristate "IMX keypad support"
 	depends on ARCH_MXC
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index df28d55..1d416dd 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_KEYBOARD_QT1070)           += qt1070.o
 obj-$(CONFIG_KEYBOARD_QT2160)		+= qt2160.o
 obj-$(CONFIG_KEYBOARD_SAMSUNG)		+= samsung-keypad.o
 obj-$(CONFIG_KEYBOARD_SH_KEYSC)		+= sh_keysc.o
+obj-$(CONFIG_KEYBOARD_SNVS_PWRKEY)	+= snvs_pwrkey.o
 obj-$(CONFIG_KEYBOARD_SPEAR)		+= spear-keyboard.o
 obj-$(CONFIG_KEYBOARD_STMPE)		+= stmpe-keypad.o
 obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stowaway.o
diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c
new file mode 100644
index 0000000..98c340e
--- /dev/null
+++ b/drivers/input/keyboard/snvs_pwrkey.c
@@ -0,0 +1,232 @@
+/*
+ * Driver for the IMX SNVS ON/OFF Power Key
+ * Copyright (C) 2015 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#define SNVS_LPSR_REG	0x4C	/* LP Status Register */
+#define SNVS_LPCR_REG	0x38	/* LP Control Register */
+#define SNVS_HPSR_REG	0x14
+#define SNVS_HPSR_BTN	BIT(6)
+#define SNVS_LPSR_SPO	BIT(18)
+#define SNVS_LPCR_DEP_EN BIT(5)
+
+#define DEBOUNCE_TIME 30
+#define REPEAT_INTERVAL 60
+
+struct pwrkey_drv_data {
+	struct regmap *snvs;
+	int irq;
+	int keycode;
+	int keystate;  /* 1:pressed */
+	int wakeup;
+	struct timer_list check_timer;
+	struct input_dev *input;
+};
+
+static void imx_imx_snvs_check_for_events(unsigned long data)
+{
+	struct pwrkey_drv_data *pdata = (struct pwrkey_drv_data *) data;
+	struct input_dev *input = pdata->input;
+	u32 state;
+
+	regmap_read(pdata->snvs, SNVS_HPSR_REG, &state);
+	state = state & SNVS_HPSR_BTN ? 1 : 0;
+
+	/* only report new event if status changed */
+	if (state ^ pdata->keystate) {
+		pdata->keystate = state;
+		input_event(input, EV_KEY, pdata->keycode, state);
+		input_sync(input);
+		pm_relax(pdata->input->dev.parent);
+	}
+
+	/* repeat check if pressed long */
+	if (state) {
+		mod_timer(&pdata->check_timer,
+			  jiffies + msecs_to_jiffies(REPEAT_INTERVAL));
+	}
+}
+
+static irqreturn_t imx_snvs_pwrkey_interrupt(int irq, void *dev_id)
+{
+	struct platform_device *pdev = dev_id;
+	struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev);
+	u32 lp_status;
+
+	pm_wakeup_event(pdata->input->dev.parent, 0);
+
+	regmap_read(pdata->snvs, SNVS_LPSR_REG, &lp_status);
+	if (lp_status & SNVS_LPSR_SPO)
+		mod_timer(&pdata->check_timer, jiffies + msecs_to_jiffies(DEBOUNCE_TIME));
+
+	/* clear SPO status */
+	regmap_write(pdata->snvs, SNVS_LPSR_REG, SNVS_LPSR_SPO);
+
+	return IRQ_HANDLED;
+}
+
+static void imx_snvs_pwrkey_act(void *pdata)
+{
+	struct pwrkey_drv_data *pd = pdata;
+
+	del_timer_sync(&pd->check_timer);
+}
+
+static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
+{
+	struct pwrkey_drv_data *pdata = NULL;
+	struct input_dev *input = NULL;
+	struct device_node *np, *snvs_np;
+	int error;
+
+	/* Get SNVS register Page */
+	np = pdev->dev.of_node;
+	if (!np)
+		return -ENODEV;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	snvs_np = of_get_parent(pdev->dev.of_node);
+	if (!snvs_np)
+		return -ENODEV;
+
+	pdata->snvs = syscon_node_to_regmap(snvs_np);
+	of_node_put(snvs_np);
+
+	if (!pdata->snvs) {
+		pr_err("Can't get snvs syscon\n");
+		return -ENODEV;
+	}
+
+	if (of_property_read_u32(np, "linux,keycode", &pdata->keycode)) {
+		pdata->keycode = KEY_POWER;
+		dev_warn(&pdev->dev, "KEY_POWER without setting in dts\n");
+	}
+
+	pdata->wakeup = of_property_read_bool(np, "wakeup");
+
+	pdata->irq = platform_get_irq(pdev, 0);
+	if (pdata->irq < 0) {
+		dev_err(&pdev->dev, "no irq defined in platform data\n");
+		return -EINVAL;
+	}
+
+	regmap_update_bits(pdata->snvs, SNVS_LPCR_REG, SNVS_LPCR_DEP_EN, SNVS_LPCR_DEP_EN);
+
+	/* clear the unexpected interrupt before driver ready */
+	regmap_write(pdata->snvs, SNVS_LPSR_REG, SNVS_LPSR_SPO);
+
+	setup_timer(&pdata->check_timer,
+		    imx_imx_snvs_check_for_events, (unsigned long) pdata);
+
+	input = devm_input_allocate_device(&pdev->dev);
+	if (!input) {
+		dev_err(&pdev->dev, "failed to allocate the input device\n");
+		return -ENOMEM;
+	}
+
+	input->name = pdev->name;
+	input->phys = "snvs-pwrkey/input0";
+	input->id.bustype = BUS_HOST;
+
+	input_set_capability(input, EV_KEY, pdata->keycode);
+
+	/* input customer action to cancel release timer */
+	error = devm_add_action(&pdev->dev, imx_snvs_pwrkey_act, pdata);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register remove action\n");
+		return error;
+	}
+
+	error = devm_request_irq(&pdev->dev, pdata->irq,
+			       imx_snvs_pwrkey_interrupt,
+			       0, pdev->name, pdev);
+
+	if (error) {
+		dev_err(&pdev->dev, "interrupt not available.\n");
+		return error;
+	}
+
+	error = input_register_device(input);
+	if (error < 0) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		input_free_device(input);
+		return error;
+	}
+
+	pdata->input = input;
+	platform_set_drvdata(pdev, pdata);
+
+	device_init_wakeup(&pdev->dev, pdata->wakeup);
+
+	return 0;
+}
+
+static int imx_snvs_pwrkey_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev);
+
+	if (device_may_wakeup(&pdev->dev))
+		enable_irq_wake(pdata->irq);
+
+	return 0;
+}
+
+static int imx_snvs_pwrkey_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev);
+
+	if (device_may_wakeup(&pdev->dev))
+		disable_irq_wake(pdata->irq);
+
+	return 0;
+}
+
+static const struct of_device_id imx_snvs_pwrkey_ids[] = {
+	{ .compatible = "fsl,sec-v4.0-pwrkey" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_snvs_pwrkey_ids);
+
+static SIMPLE_DEV_PM_OPS(imx_snvs_pwrkey_pm_ops, imx_snvs_pwrkey_suspend,
+				imx_snvs_pwrkey_resume);
+
+static struct platform_driver imx_snvs_pwrkey_driver = {
+	.driver = {
+		.name = "snvs_pwrkey",
+		.pm     = &imx_snvs_pwrkey_pm_ops,
+		.of_match_table = imx_snvs_pwrkey_ids,
+	},
+	.probe = imx_snvs_pwrkey_probe,
+};
+module_platform_driver(imx_snvs_pwrkey_driver);
+
+MODULE_AUTHOR("Freescale Semiconductor");
+MODULE_DESCRIPTION("i.MX snvs power key Driver");
+MODULE_LICENSE("GPL");
-- 
1.9.1

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [PATCH v3 4/6] input: keyboard: imx: add snvs power key driver
@ 2015-05-21 16:16   ` Frank.Li
  0 siblings, 0 replies; 27+ messages in thread
From: Frank.Li @ 2015-05-21 16:16 UTC (permalink / raw)
  To: lznuaa, shawn.guo, dmitry.torokhov, robh+dt, alexandre.belloni, linux
  Cc: linux-arm-kernel, linux-input, rtc-linux, devicetree, Robin Gong,
	Frank Li

From: Robin Gong <b38343@freescale.com>

add snvs power key driver.
It work in imx chips after i.mx6sx

ON/OFF key used power on/off whole system.
This driver make it wakeup from suspend state when short press
ON/OFF key.

Long time press will trig SNVS power off chip without software
intervention.

Signed-off-by: Robin Gong <b38343@freescale.com>
Signed-off-by: Frank Li <Frank.Li@freescale.com>
---
 drivers/input/keyboard/Kconfig       |  11 ++
 drivers/input/keyboard/Makefile      |   1 +
 drivers/input/keyboard/snvs_pwrkey.c | 232 +++++++++++++++++++++++++++++++++++
 3 files changed, 244 insertions(+)
 create mode 100644 drivers/input/keyboard/snvs_pwrkey.c

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 106fbac..61b3fab 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -400,6 +400,17 @@ config KEYBOARD_MPR121
 	  To compile this driver as a module, choose M here: the
 	  module will be called mpr121_touchkey.
 
+config KEYBOARD_SNVS_PWRKEY
+	tristate "IMX SNVS Power Key Driver"
+	depends on SOC_IMX6SX
+	depends on OF
+	help
+	  This is the snvs powerkey driver for the Freescale i.MX application
+	  processors that are newer than i.MX6 SX.
+
+	  To compile this driver as a module, choose M here; the
+	  module will be called snvs_pwrkey.
+
 config KEYBOARD_IMX
 	tristate "IMX keypad support"
 	depends on ARCH_MXC
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index df28d55..1d416dd 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_KEYBOARD_QT1070)           += qt1070.o
 obj-$(CONFIG_KEYBOARD_QT2160)		+= qt2160.o
 obj-$(CONFIG_KEYBOARD_SAMSUNG)		+= samsung-keypad.o
 obj-$(CONFIG_KEYBOARD_SH_KEYSC)		+= sh_keysc.o
+obj-$(CONFIG_KEYBOARD_SNVS_PWRKEY)	+= snvs_pwrkey.o
 obj-$(CONFIG_KEYBOARD_SPEAR)		+= spear-keyboard.o
 obj-$(CONFIG_KEYBOARD_STMPE)		+= stmpe-keypad.o
 obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stowaway.o
diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c
new file mode 100644
index 0000000..98c340e
--- /dev/null
+++ b/drivers/input/keyboard/snvs_pwrkey.c
@@ -0,0 +1,232 @@
+/*
+ * Driver for the IMX SNVS ON/OFF Power Key
+ * Copyright (C) 2015 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#define SNVS_LPSR_REG	0x4C	/* LP Status Register */
+#define SNVS_LPCR_REG	0x38	/* LP Control Register */
+#define SNVS_HPSR_REG	0x14
+#define SNVS_HPSR_BTN	BIT(6)
+#define SNVS_LPSR_SPO	BIT(18)
+#define SNVS_LPCR_DEP_EN BIT(5)
+
+#define DEBOUNCE_TIME 30
+#define REPEAT_INTERVAL 60
+
+struct pwrkey_drv_data {
+	struct regmap *snvs;
+	int irq;
+	int keycode;
+	int keystate;  /* 1:pressed */
+	int wakeup;
+	struct timer_list check_timer;
+	struct input_dev *input;
+};
+
+static void imx_imx_snvs_check_for_events(unsigned long data)
+{
+	struct pwrkey_drv_data *pdata = (struct pwrkey_drv_data *) data;
+	struct input_dev *input = pdata->input;
+	u32 state;
+
+	regmap_read(pdata->snvs, SNVS_HPSR_REG, &state);
+	state = state & SNVS_HPSR_BTN ? 1 : 0;
+
+	/* only report new event if status changed */
+	if (state ^ pdata->keystate) {
+		pdata->keystate = state;
+		input_event(input, EV_KEY, pdata->keycode, state);
+		input_sync(input);
+		pm_relax(pdata->input->dev.parent);
+	}
+
+	/* repeat check if pressed long */
+	if (state) {
+		mod_timer(&pdata->check_timer,
+			  jiffies + msecs_to_jiffies(REPEAT_INTERVAL));
+	}
+}
+
+static irqreturn_t imx_snvs_pwrkey_interrupt(int irq, void *dev_id)
+{
+	struct platform_device *pdev = dev_id;
+	struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev);
+	u32 lp_status;
+
+	pm_wakeup_event(pdata->input->dev.parent, 0);
+
+	regmap_read(pdata->snvs, SNVS_LPSR_REG, &lp_status);
+	if (lp_status & SNVS_LPSR_SPO)
+		mod_timer(&pdata->check_timer, jiffies + msecs_to_jiffies(DEBOUNCE_TIME));
+
+	/* clear SPO status */
+	regmap_write(pdata->snvs, SNVS_LPSR_REG, SNVS_LPSR_SPO);
+
+	return IRQ_HANDLED;
+}
+
+static void imx_snvs_pwrkey_act(void *pdata)
+{
+	struct pwrkey_drv_data *pd = pdata;
+
+	del_timer_sync(&pd->check_timer);
+}
+
+static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
+{
+	struct pwrkey_drv_data *pdata = NULL;
+	struct input_dev *input = NULL;
+	struct device_node *np, *snvs_np;
+	int error;
+
+	/* Get SNVS register Page */
+	np = pdev->dev.of_node;
+	if (!np)
+		return -ENODEV;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	snvs_np = of_get_parent(pdev->dev.of_node);
+	if (!snvs_np)
+		return -ENODEV;
+
+	pdata->snvs = syscon_node_to_regmap(snvs_np);
+	of_node_put(snvs_np);
+
+	if (!pdata->snvs) {
+		pr_err("Can't get snvs syscon\n");
+		return -ENODEV;
+	}
+
+	if (of_property_read_u32(np, "linux,keycode", &pdata->keycode)) {
+		pdata->keycode = KEY_POWER;
+		dev_warn(&pdev->dev, "KEY_POWER without setting in dts\n");
+	}
+
+	pdata->wakeup = of_property_read_bool(np, "wakeup");
+
+	pdata->irq = platform_get_irq(pdev, 0);
+	if (pdata->irq < 0) {
+		dev_err(&pdev->dev, "no irq defined in platform data\n");
+		return -EINVAL;
+	}
+
+	regmap_update_bits(pdata->snvs, SNVS_LPCR_REG, SNVS_LPCR_DEP_EN, SNVS_LPCR_DEP_EN);
+
+	/* clear the unexpected interrupt before driver ready */
+	regmap_write(pdata->snvs, SNVS_LPSR_REG, SNVS_LPSR_SPO);
+
+	setup_timer(&pdata->check_timer,
+		    imx_imx_snvs_check_for_events, (unsigned long) pdata);
+
+	input = devm_input_allocate_device(&pdev->dev);
+	if (!input) {
+		dev_err(&pdev->dev, "failed to allocate the input device\n");
+		return -ENOMEM;
+	}
+
+	input->name = pdev->name;
+	input->phys = "snvs-pwrkey/input0";
+	input->id.bustype = BUS_HOST;
+
+	input_set_capability(input, EV_KEY, pdata->keycode);
+
+	/* input customer action to cancel release timer */
+	error = devm_add_action(&pdev->dev, imx_snvs_pwrkey_act, pdata);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register remove action\n");
+		return error;
+	}
+
+	error = devm_request_irq(&pdev->dev, pdata->irq,
+			       imx_snvs_pwrkey_interrupt,
+			       0, pdev->name, pdev);
+
+	if (error) {
+		dev_err(&pdev->dev, "interrupt not available.\n");
+		return error;
+	}
+
+	error = input_register_device(input);
+	if (error < 0) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		input_free_device(input);
+		return error;
+	}
+
+	pdata->input = input;
+	platform_set_drvdata(pdev, pdata);
+
+	device_init_wakeup(&pdev->dev, pdata->wakeup);
+
+	return 0;
+}
+
+static int imx_snvs_pwrkey_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev);
+
+	if (device_may_wakeup(&pdev->dev))
+		enable_irq_wake(pdata->irq);
+
+	return 0;
+}
+
+static int imx_snvs_pwrkey_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev);
+
+	if (device_may_wakeup(&pdev->dev))
+		disable_irq_wake(pdata->irq);
+
+	return 0;
+}
+
+static const struct of_device_id imx_snvs_pwrkey_ids[] = {
+	{ .compatible = "fsl,sec-v4.0-pwrkey" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_snvs_pwrkey_ids);
+
+static SIMPLE_DEV_PM_OPS(imx_snvs_pwrkey_pm_ops, imx_snvs_pwrkey_suspend,
+				imx_snvs_pwrkey_resume);
+
+static struct platform_driver imx_snvs_pwrkey_driver = {
+	.driver = {
+		.name = "snvs_pwrkey",
+		.pm     = &imx_snvs_pwrkey_pm_ops,
+		.of_match_table = imx_snvs_pwrkey_ids,
+	},
+	.probe = imx_snvs_pwrkey_probe,
+};
+module_platform_driver(imx_snvs_pwrkey_driver);
+
+MODULE_AUTHOR("Freescale Semiconductor");
+MODULE_DESCRIPTION("i.MX snvs power key Driver");
+MODULE_LICENSE("GPL");
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [PATCH v3 4/6] input: keyboard: imx: add snvs power key driver
@ 2015-05-21 16:16   ` Frank.Li
  0 siblings, 0 replies; 27+ messages in thread
From: Frank.Li at freescale.com @ 2015-05-21 16:16 UTC (permalink / raw)
  To: linux-arm-kernel

From: Robin Gong <b38343@freescale.com>

add snvs power key driver.
It work in imx chips after i.mx6sx

ON/OFF key used power on/off whole system.
This driver make it wakeup from suspend state when short press
ON/OFF key.

Long time press will trig SNVS power off chip without software
intervention.

Signed-off-by: Robin Gong <b38343@freescale.com>
Signed-off-by: Frank Li <Frank.Li@freescale.com>
---
 drivers/input/keyboard/Kconfig       |  11 ++
 drivers/input/keyboard/Makefile      |   1 +
 drivers/input/keyboard/snvs_pwrkey.c | 232 +++++++++++++++++++++++++++++++++++
 3 files changed, 244 insertions(+)
 create mode 100644 drivers/input/keyboard/snvs_pwrkey.c

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 106fbac..61b3fab 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -400,6 +400,17 @@ config KEYBOARD_MPR121
 	  To compile this driver as a module, choose M here: the
 	  module will be called mpr121_touchkey.
 
+config KEYBOARD_SNVS_PWRKEY
+	tristate "IMX SNVS Power Key Driver"
+	depends on SOC_IMX6SX
+	depends on OF
+	help
+	  This is the snvs powerkey driver for the Freescale i.MX application
+	  processors that are newer than i.MX6 SX.
+
+	  To compile this driver as a module, choose M here; the
+	  module will be called snvs_pwrkey.
+
 config KEYBOARD_IMX
 	tristate "IMX keypad support"
 	depends on ARCH_MXC
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index df28d55..1d416dd 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_KEYBOARD_QT1070)           += qt1070.o
 obj-$(CONFIG_KEYBOARD_QT2160)		+= qt2160.o
 obj-$(CONFIG_KEYBOARD_SAMSUNG)		+= samsung-keypad.o
 obj-$(CONFIG_KEYBOARD_SH_KEYSC)		+= sh_keysc.o
+obj-$(CONFIG_KEYBOARD_SNVS_PWRKEY)	+= snvs_pwrkey.o
 obj-$(CONFIG_KEYBOARD_SPEAR)		+= spear-keyboard.o
 obj-$(CONFIG_KEYBOARD_STMPE)		+= stmpe-keypad.o
 obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stowaway.o
diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c
new file mode 100644
index 0000000..98c340e
--- /dev/null
+++ b/drivers/input/keyboard/snvs_pwrkey.c
@@ -0,0 +1,232 @@
+/*
+ * Driver for the IMX SNVS ON/OFF Power Key
+ * Copyright (C) 2015 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#define SNVS_LPSR_REG	0x4C	/* LP Status Register */
+#define SNVS_LPCR_REG	0x38	/* LP Control Register */
+#define SNVS_HPSR_REG	0x14
+#define SNVS_HPSR_BTN	BIT(6)
+#define SNVS_LPSR_SPO	BIT(18)
+#define SNVS_LPCR_DEP_EN BIT(5)
+
+#define DEBOUNCE_TIME 30
+#define REPEAT_INTERVAL 60
+
+struct pwrkey_drv_data {
+	struct regmap *snvs;
+	int irq;
+	int keycode;
+	int keystate;  /* 1:pressed */
+	int wakeup;
+	struct timer_list check_timer;
+	struct input_dev *input;
+};
+
+static void imx_imx_snvs_check_for_events(unsigned long data)
+{
+	struct pwrkey_drv_data *pdata = (struct pwrkey_drv_data *) data;
+	struct input_dev *input = pdata->input;
+	u32 state;
+
+	regmap_read(pdata->snvs, SNVS_HPSR_REG, &state);
+	state = state & SNVS_HPSR_BTN ? 1 : 0;
+
+	/* only report new event if status changed */
+	if (state ^ pdata->keystate) {
+		pdata->keystate = state;
+		input_event(input, EV_KEY, pdata->keycode, state);
+		input_sync(input);
+		pm_relax(pdata->input->dev.parent);
+	}
+
+	/* repeat check if pressed long */
+	if (state) {
+		mod_timer(&pdata->check_timer,
+			  jiffies + msecs_to_jiffies(REPEAT_INTERVAL));
+	}
+}
+
+static irqreturn_t imx_snvs_pwrkey_interrupt(int irq, void *dev_id)
+{
+	struct platform_device *pdev = dev_id;
+	struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev);
+	u32 lp_status;
+
+	pm_wakeup_event(pdata->input->dev.parent, 0);
+
+	regmap_read(pdata->snvs, SNVS_LPSR_REG, &lp_status);
+	if (lp_status & SNVS_LPSR_SPO)
+		mod_timer(&pdata->check_timer, jiffies + msecs_to_jiffies(DEBOUNCE_TIME));
+
+	/* clear SPO status */
+	regmap_write(pdata->snvs, SNVS_LPSR_REG, SNVS_LPSR_SPO);
+
+	return IRQ_HANDLED;
+}
+
+static void imx_snvs_pwrkey_act(void *pdata)
+{
+	struct pwrkey_drv_data *pd = pdata;
+
+	del_timer_sync(&pd->check_timer);
+}
+
+static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
+{
+	struct pwrkey_drv_data *pdata = NULL;
+	struct input_dev *input = NULL;
+	struct device_node *np, *snvs_np;
+	int error;
+
+	/* Get SNVS register Page */
+	np = pdev->dev.of_node;
+	if (!np)
+		return -ENODEV;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	snvs_np = of_get_parent(pdev->dev.of_node);
+	if (!snvs_np)
+		return -ENODEV;
+
+	pdata->snvs = syscon_node_to_regmap(snvs_np);
+	of_node_put(snvs_np);
+
+	if (!pdata->snvs) {
+		pr_err("Can't get snvs syscon\n");
+		return -ENODEV;
+	}
+
+	if (of_property_read_u32(np, "linux,keycode", &pdata->keycode)) {
+		pdata->keycode = KEY_POWER;
+		dev_warn(&pdev->dev, "KEY_POWER without setting in dts\n");
+	}
+
+	pdata->wakeup = of_property_read_bool(np, "wakeup");
+
+	pdata->irq = platform_get_irq(pdev, 0);
+	if (pdata->irq < 0) {
+		dev_err(&pdev->dev, "no irq defined in platform data\n");
+		return -EINVAL;
+	}
+
+	regmap_update_bits(pdata->snvs, SNVS_LPCR_REG, SNVS_LPCR_DEP_EN, SNVS_LPCR_DEP_EN);
+
+	/* clear the unexpected interrupt before driver ready */
+	regmap_write(pdata->snvs, SNVS_LPSR_REG, SNVS_LPSR_SPO);
+
+	setup_timer(&pdata->check_timer,
+		    imx_imx_snvs_check_for_events, (unsigned long) pdata);
+
+	input = devm_input_allocate_device(&pdev->dev);
+	if (!input) {
+		dev_err(&pdev->dev, "failed to allocate the input device\n");
+		return -ENOMEM;
+	}
+
+	input->name = pdev->name;
+	input->phys = "snvs-pwrkey/input0";
+	input->id.bustype = BUS_HOST;
+
+	input_set_capability(input, EV_KEY, pdata->keycode);
+
+	/* input customer action to cancel release timer */
+	error = devm_add_action(&pdev->dev, imx_snvs_pwrkey_act, pdata);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register remove action\n");
+		return error;
+	}
+
+	error = devm_request_irq(&pdev->dev, pdata->irq,
+			       imx_snvs_pwrkey_interrupt,
+			       0, pdev->name, pdev);
+
+	if (error) {
+		dev_err(&pdev->dev, "interrupt not available.\n");
+		return error;
+	}
+
+	error = input_register_device(input);
+	if (error < 0) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		input_free_device(input);
+		return error;
+	}
+
+	pdata->input = input;
+	platform_set_drvdata(pdev, pdata);
+
+	device_init_wakeup(&pdev->dev, pdata->wakeup);
+
+	return 0;
+}
+
+static int imx_snvs_pwrkey_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev);
+
+	if (device_may_wakeup(&pdev->dev))
+		enable_irq_wake(pdata->irq);
+
+	return 0;
+}
+
+static int imx_snvs_pwrkey_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev);
+
+	if (device_may_wakeup(&pdev->dev))
+		disable_irq_wake(pdata->irq);
+
+	return 0;
+}
+
+static const struct of_device_id imx_snvs_pwrkey_ids[] = {
+	{ .compatible = "fsl,sec-v4.0-pwrkey" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_snvs_pwrkey_ids);
+
+static SIMPLE_DEV_PM_OPS(imx_snvs_pwrkey_pm_ops, imx_snvs_pwrkey_suspend,
+				imx_snvs_pwrkey_resume);
+
+static struct platform_driver imx_snvs_pwrkey_driver = {
+	.driver = {
+		.name = "snvs_pwrkey",
+		.pm     = &imx_snvs_pwrkey_pm_ops,
+		.of_match_table = imx_snvs_pwrkey_ids,
+	},
+	.probe = imx_snvs_pwrkey_probe,
+};
+module_platform_driver(imx_snvs_pwrkey_driver);
+
+MODULE_AUTHOR("Freescale Semiconductor");
+MODULE_DESCRIPTION("i.MX snvs power key Driver");
+MODULE_LICENSE("GPL");
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [rtc-linux] [PATCH v3 5/6] document: devicetree: input: imx: i.mx snvs power device tree bindings
  2015-05-21 16:16 ` Frank.Li
  (?)
@ 2015-05-21 16:16   ` Frank.Li
  -1 siblings, 0 replies; 27+ messages in thread
From: Frank.Li @ 2015-05-21 16:16 UTC (permalink / raw)
  To: lznuaa, shawn.guo, dmitry.torokhov, robh+dt, alexandre.belloni, linux
  Cc: linux-arm-kernel, linux-input, rtc-linux, devicetree, Frank Li,
	Robin Gong

From: Frank Li <Frank.Li@freescale.com>

The snvs-pwrkey is designed to enable POWER key function which controlled
by SNVS ONOFF. the driver can report the status of POWER key and wakeup
system if pressed after system suspend.

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Robin Gong <b38343@freescale.com>
---
 .../devicetree/bindings/crypto/fsl-sec4.txt        | 42 ++++++++++++++++++++++
 .../devicetree/bindings/input/snvs-pwrkey.txt      |  1 +
 2 files changed, 43 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/snvs-pwrkey.txt

diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
index 87f5921..b2a417d 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
@@ -375,6 +375,41 @@ EXAMPLE
 	};
 
 =====================================================================
+System ON/OFF key driver
+
+  The snvs-pwrkey is designed to enable POWER key function which controlled
+  by SNVS ONOFF, the driver can report the status of POWER key and wakeup
+  system if pressed after system suspend.
+
+  - compatible:
+      Usage: required
+      Value type: <string>
+      Definition: Mush include "fsl,sec-v4.0-pwrkey".
+
+  - interrupts:
+      Usage: required
+      Value type: <prop_encoded-array>
+      Definition: The SNVS ON/OFF interrupt number to the CPU(s).
+
+  - linux,keycode:
+      Usage: option
+      Value type: <int>
+      Definition: Keycode to emit, KEY_POWER by default.
+
+  - wakeup:
+      Usage: option
+      Value type: <boo>
+      Definition: Button can wake-up the system
+
+EXAMPLE:
+	snvs-pwrkey@0x020cc000 {
+		compatible = "fsl,sec-v4.0-pwrkey";
+		interrupts = <0 4 0x4>
+	        linux,keycode = <116>; /* KEY_POWER */
+		wakeup;
+	};
+
+=====================================================================
 FULL EXAMPLE
 
 	crypto: crypto@300000 {
@@ -452,6 +487,13 @@ FULL EXAMPLE
 			compatible = "fsl,sec-v4.0-mon-rtc-lp";
 			interrupts = <93 2>;
 		};
+
+		snvs-pwrkey@0x020cc000 {
+			compatible = "fsl,sec-v4.0-pwrkey";
+			interrupts = <0 4 0x4>;
+			linux,keycode = <116>; /* KEY_POWER */
+			wakeup;
+		};
 	};
 
 =====================================================================
diff --git a/Documentation/devicetree/bindings/input/snvs-pwrkey.txt b/Documentation/devicetree/bindings/input/snvs-pwrkey.txt
new file mode 100644
index 0000000..70c1425
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/snvs-pwrkey.txt
@@ -0,0 +1 @@
+See Documentation/devicetree/bindings/crypto/fsl-sec4.txt
-- 
1.9.1

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [PATCH v3 5/6] document: devicetree: input: imx: i.mx snvs power device tree bindings
@ 2015-05-21 16:16   ` Frank.Li
  0 siblings, 0 replies; 27+ messages in thread
From: Frank.Li @ 2015-05-21 16:16 UTC (permalink / raw)
  To: lznuaa, shawn.guo, dmitry.torokhov, robh+dt, alexandre.belloni, linux
  Cc: linux-arm-kernel, linux-input, rtc-linux, devicetree, Frank Li,
	Robin Gong

From: Frank Li <Frank.Li@freescale.com>

The snvs-pwrkey is designed to enable POWER key function which controlled
by SNVS ONOFF. the driver can report the status of POWER key and wakeup
system if pressed after system suspend.

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Robin Gong <b38343@freescale.com>
---
 .../devicetree/bindings/crypto/fsl-sec4.txt        | 42 ++++++++++++++++++++++
 .../devicetree/bindings/input/snvs-pwrkey.txt      |  1 +
 2 files changed, 43 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/snvs-pwrkey.txt

diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
index 87f5921..b2a417d 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
@@ -375,6 +375,41 @@ EXAMPLE
 	};
 
 =====================================================================
+System ON/OFF key driver
+
+  The snvs-pwrkey is designed to enable POWER key function which controlled
+  by SNVS ONOFF, the driver can report the status of POWER key and wakeup
+  system if pressed after system suspend.
+
+  - compatible:
+      Usage: required
+      Value type: <string>
+      Definition: Mush include "fsl,sec-v4.0-pwrkey".
+
+  - interrupts:
+      Usage: required
+      Value type: <prop_encoded-array>
+      Definition: The SNVS ON/OFF interrupt number to the CPU(s).
+
+  - linux,keycode:
+      Usage: option
+      Value type: <int>
+      Definition: Keycode to emit, KEY_POWER by default.
+
+  - wakeup:
+      Usage: option
+      Value type: <boo>
+      Definition: Button can wake-up the system
+
+EXAMPLE:
+	snvs-pwrkey@0x020cc000 {
+		compatible = "fsl,sec-v4.0-pwrkey";
+		interrupts = <0 4 0x4>
+	        linux,keycode = <116>; /* KEY_POWER */
+		wakeup;
+	};
+
+=====================================================================
 FULL EXAMPLE
 
 	crypto: crypto@300000 {
@@ -452,6 +487,13 @@ FULL EXAMPLE
 			compatible = "fsl,sec-v4.0-mon-rtc-lp";
 			interrupts = <93 2>;
 		};
+
+		snvs-pwrkey@0x020cc000 {
+			compatible = "fsl,sec-v4.0-pwrkey";
+			interrupts = <0 4 0x4>;
+			linux,keycode = <116>; /* KEY_POWER */
+			wakeup;
+		};
 	};
 
 =====================================================================
diff --git a/Documentation/devicetree/bindings/input/snvs-pwrkey.txt b/Documentation/devicetree/bindings/input/snvs-pwrkey.txt
new file mode 100644
index 0000000..70c1425
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/snvs-pwrkey.txt
@@ -0,0 +1 @@
+See Documentation/devicetree/bindings/crypto/fsl-sec4.txt
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [PATCH v3 5/6] document: devicetree: input: imx: i.mx snvs power device tree bindings
@ 2015-05-21 16:16   ` Frank.Li
  0 siblings, 0 replies; 27+ messages in thread
From: Frank.Li at freescale.com @ 2015-05-21 16:16 UTC (permalink / raw)
  To: linux-arm-kernel

From: Frank Li <Frank.Li@freescale.com>

The snvs-pwrkey is designed to enable POWER key function which controlled
by SNVS ONOFF. the driver can report the status of POWER key and wakeup
system if pressed after system suspend.

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Robin Gong <b38343@freescale.com>
---
 .../devicetree/bindings/crypto/fsl-sec4.txt        | 42 ++++++++++++++++++++++
 .../devicetree/bindings/input/snvs-pwrkey.txt      |  1 +
 2 files changed, 43 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/snvs-pwrkey.txt

diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
index 87f5921..b2a417d 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
@@ -375,6 +375,41 @@ EXAMPLE
 	};
 
 =====================================================================
+System ON/OFF key driver
+
+  The snvs-pwrkey is designed to enable POWER key function which controlled
+  by SNVS ONOFF, the driver can report the status of POWER key and wakeup
+  system if pressed after system suspend.
+
+  - compatible:
+      Usage: required
+      Value type: <string>
+      Definition: Mush include "fsl,sec-v4.0-pwrkey".
+
+  - interrupts:
+      Usage: required
+      Value type: <prop_encoded-array>
+      Definition: The SNVS ON/OFF interrupt number to the CPU(s).
+
+  - linux,keycode:
+      Usage: option
+      Value type: <int>
+      Definition: Keycode to emit, KEY_POWER by default.
+
+  - wakeup:
+      Usage: option
+      Value type: <boo>
+      Definition: Button can wake-up the system
+
+EXAMPLE:
+	snvs-pwrkey at 0x020cc000 {
+		compatible = "fsl,sec-v4.0-pwrkey";
+		interrupts = <0 4 0x4>
+	        linux,keycode = <116>; /* KEY_POWER */
+		wakeup;
+	};
+
+=====================================================================
 FULL EXAMPLE
 
 	crypto: crypto at 300000 {
@@ -452,6 +487,13 @@ FULL EXAMPLE
 			compatible = "fsl,sec-v4.0-mon-rtc-lp";
 			interrupts = <93 2>;
 		};
+
+		snvs-pwrkey at 0x020cc000 {
+			compatible = "fsl,sec-v4.0-pwrkey";
+			interrupts = <0 4 0x4>;
+			linux,keycode = <116>; /* KEY_POWER */
+			wakeup;
+		};
 	};
 
 =====================================================================
diff --git a/Documentation/devicetree/bindings/input/snvs-pwrkey.txt b/Documentation/devicetree/bindings/input/snvs-pwrkey.txt
new file mode 100644
index 0000000..70c1425
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/snvs-pwrkey.txt
@@ -0,0 +1 @@
+See Documentation/devicetree/bindings/crypto/fsl-sec4.txt
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [rtc-linux] [PATCH v3 6/6] arm: dts: imx6sx: enable snvs power key
  2015-05-21 16:16 ` Frank.Li
  (?)
@ 2015-05-21 16:16   ` Frank.Li
  -1 siblings, 0 replies; 27+ messages in thread
From: Frank.Li @ 2015-05-21 16:16 UTC (permalink / raw)
  To: lznuaa, shawn.guo, dmitry.torokhov, robh+dt, alexandre.belloni, linux
  Cc: linux-arm-kernel, linux-input, rtc-linux, devicetree, Frank Li

From: Frank Li <Frank.Li@freescale.com>

enable snvs ONOFF power key support

Signed-off-by: Frank Li <Frank.Li@freescale.com>
---
 arch/arm/boot/dts/imx6sx.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 3cb3b5b..ad38aea 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -677,6 +677,13 @@
 					mask = <0x60>;
 					status = "disabled";
 				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <116>; /* KEY_POWER */
+					wakeup;
+				};
 			};
 
 			epit1: epit@020d0000 {
-- 
1.9.1

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [PATCH v3 6/6] arm: dts: imx6sx: enable snvs power key
@ 2015-05-21 16:16   ` Frank.Li
  0 siblings, 0 replies; 27+ messages in thread
From: Frank.Li @ 2015-05-21 16:16 UTC (permalink / raw)
  To: lznuaa, shawn.guo, dmitry.torokhov, robh+dt, alexandre.belloni, linux
  Cc: linux-arm-kernel, linux-input, rtc-linux, devicetree, Frank Li

From: Frank Li <Frank.Li@freescale.com>

enable snvs ONOFF power key support

Signed-off-by: Frank Li <Frank.Li@freescale.com>
---
 arch/arm/boot/dts/imx6sx.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 3cb3b5b..ad38aea 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -677,6 +677,13 @@
 					mask = <0x60>;
 					status = "disabled";
 				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <116>; /* KEY_POWER */
+					wakeup;
+				};
 			};
 
 			epit1: epit@020d0000 {
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [PATCH v3 6/6] arm: dts: imx6sx: enable snvs power key
@ 2015-05-21 16:16   ` Frank.Li
  0 siblings, 0 replies; 27+ messages in thread
From: Frank.Li at freescale.com @ 2015-05-21 16:16 UTC (permalink / raw)
  To: linux-arm-kernel

From: Frank Li <Frank.Li@freescale.com>

enable snvs ONOFF power key support

Signed-off-by: Frank Li <Frank.Li@freescale.com>
---
 arch/arm/boot/dts/imx6sx.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 3cb3b5b..ad38aea 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -677,6 +677,13 @@
 					mask = <0x60>;
 					status = "disabled";
 				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <116>; /* KEY_POWER */
+					wakeup;
+				};
 			};
 
 			epit1: epit at 020d0000 {
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [rtc-linux] Re: [PATCH v3 1/6] rtc: arm: imx: snvs: change use syscon to access register
  2015-05-21 16:16   ` Frank.Li
  (?)
@ 2015-05-22  8:07     ` Alexandre Belloni
  -1 siblings, 0 replies; 27+ messages in thread
From: Alexandre Belloni @ 2015-05-22  8:07 UTC (permalink / raw)
  To: Frank.Li
  Cc: lznuaa, shawn.guo, dmitry.torokhov, robh+dt, linux,
	linux-arm-kernel, linux-input, rtc-linux, devicetree

Hi,

This looks good to me, a few nits below

On 22/05/2015 at 00:16:47 +0800, Frank.Li@freescale.com wrote :
> -	spin_unlock_irqrestore(&data->lock, flags);
> +	regmap_update_bits(data->regmap, data->offset + SNVS_LPCR,
> +			  (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN),
That line is not properly aligned (missing one space)

[...]

> +	if (of_device_is_compatible(snvs_np, "syscon")) {
> +		data->regmap = syscon_node_to_regmap(snvs_np);
> +		data->offset = 0x34;
> +	} else {
> +		pr_warning("snvs rtc: you use old dts file, please update it\n");

This should be pr_warn()


-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: [PATCH v3 1/6] rtc: arm: imx: snvs: change use syscon to access register
@ 2015-05-22  8:07     ` Alexandre Belloni
  0 siblings, 0 replies; 27+ messages in thread
From: Alexandre Belloni @ 2015-05-22  8:07 UTC (permalink / raw)
  To: Frank.Li
  Cc: lznuaa, shawn.guo, dmitry.torokhov, robh+dt, linux,
	linux-arm-kernel, linux-input, rtc-linux, devicetree

Hi,

This looks good to me, a few nits below

On 22/05/2015 at 00:16:47 +0800, Frank.Li@freescale.com wrote :
> -	spin_unlock_irqrestore(&data->lock, flags);
> +	regmap_update_bits(data->regmap, data->offset + SNVS_LPCR,
> +			  (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN),
That line is not properly aligned (missing one space)

[...]

> +	if (of_device_is_compatible(snvs_np, "syscon")) {
> +		data->regmap = syscon_node_to_regmap(snvs_np);
> +		data->offset = 0x34;
> +	} else {
> +		pr_warning("snvs rtc: you use old dts file, please update it\n");

This should be pr_warn()


-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

^ permalink raw reply	[flat|nested] 27+ messages in thread

* [PATCH v3 1/6] rtc: arm: imx: snvs: change use syscon to access register
@ 2015-05-22  8:07     ` Alexandre Belloni
  0 siblings, 0 replies; 27+ messages in thread
From: Alexandre Belloni @ 2015-05-22  8:07 UTC (permalink / raw)
  To: linux-arm-kernel

Hi,

This looks good to me, a few nits below

On 22/05/2015 at 00:16:47 +0800, Frank.Li at freescale.com wrote :
> -	spin_unlock_irqrestore(&data->lock, flags);
> +	regmap_update_bits(data->regmap, data->offset + SNVS_LPCR,
> +			  (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN),
That line is not properly aligned (missing one space)

[...]

> +	if (of_device_is_compatible(snvs_np, "syscon")) {
> +		data->regmap = syscon_node_to_regmap(snvs_np);
> +		data->offset = 0x34;
> +	} else {
> +		pr_warning("snvs rtc: you use old dts file, please update it\n");

This should be pr_warn()


-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

^ permalink raw reply	[flat|nested] 27+ messages in thread

* [rtc-linux] Re: [PATCH v3 1/6] rtc: arm: imx: snvs: change use syscon to access register
  2015-05-22  8:07     ` Alexandre Belloni
  (?)
@ 2015-05-25  5:54       ` Shawn Guo
  -1 siblings, 0 replies; 27+ messages in thread
From: Shawn Guo @ 2015-05-25  5:54 UTC (permalink / raw)
  To: Alexandre Belloni
  Cc: Frank.Li, lznuaa, dmitry.torokhov, robh+dt, linux,
	linux-arm-kernel, linux-input, rtc-linux, devicetree

On Fri, May 22, 2015 at 10:07:49AM +0200, Alexandre Belloni wrote:
> Hi,
> 
> This looks good to me, a few nits below
> 
> On 22/05/2015 at 00:16:47 +0800, Frank.Li@freescale.com wrote :
> > -	spin_unlock_irqrestore(&data->lock, flags);
> > +	regmap_update_bits(data->regmap, data->offset + SNVS_LPCR,
> > +			  (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN),
> That line is not properly aligned (missing one space)
> 
> [...]
> 
> > +	if (of_device_is_compatible(snvs_np, "syscon")) {
> > +		data->regmap = syscon_node_to_regmap(snvs_np);
> > +		data->offset = 0x34;
> > +	} else {
> > +		pr_warning("snvs rtc: you use old dts file, please update it\n");
> 
> This should be pr_warn()

It should be dev_warn().

Shawn

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: [PATCH v3 1/6] rtc: arm: imx: snvs: change use syscon to access register
@ 2015-05-25  5:54       ` Shawn Guo
  0 siblings, 0 replies; 27+ messages in thread
From: Shawn Guo @ 2015-05-25  5:54 UTC (permalink / raw)
  To: Alexandre Belloni
  Cc: Frank.Li, lznuaa, dmitry.torokhov, robh+dt, linux,
	linux-arm-kernel, linux-input, rtc-linux, devicetree

On Fri, May 22, 2015 at 10:07:49AM +0200, Alexandre Belloni wrote:
> Hi,
> 
> This looks good to me, a few nits below
> 
> On 22/05/2015 at 00:16:47 +0800, Frank.Li@freescale.com wrote :
> > -	spin_unlock_irqrestore(&data->lock, flags);
> > +	regmap_update_bits(data->regmap, data->offset + SNVS_LPCR,
> > +			  (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN),
> That line is not properly aligned (missing one space)
> 
> [...]
> 
> > +	if (of_device_is_compatible(snvs_np, "syscon")) {
> > +		data->regmap = syscon_node_to_regmap(snvs_np);
> > +		data->offset = 0x34;
> > +	} else {
> > +		pr_warning("snvs rtc: you use old dts file, please update it\n");
> 
> This should be pr_warn()

It should be dev_warn().

Shawn

^ permalink raw reply	[flat|nested] 27+ messages in thread

* [PATCH v3 1/6] rtc: arm: imx: snvs: change use syscon to access register
@ 2015-05-25  5:54       ` Shawn Guo
  0 siblings, 0 replies; 27+ messages in thread
From: Shawn Guo @ 2015-05-25  5:54 UTC (permalink / raw)
  To: linux-arm-kernel

On Fri, May 22, 2015 at 10:07:49AM +0200, Alexandre Belloni wrote:
> Hi,
> 
> This looks good to me, a few nits below
> 
> On 22/05/2015 at 00:16:47 +0800, Frank.Li at freescale.com wrote :
> > -	spin_unlock_irqrestore(&data->lock, flags);
> > +	regmap_update_bits(data->regmap, data->offset + SNVS_LPCR,
> > +			  (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN),
> That line is not properly aligned (missing one space)
> 
> [...]
> 
> > +	if (of_device_is_compatible(snvs_np, "syscon")) {
> > +		data->regmap = syscon_node_to_regmap(snvs_np);
> > +		data->offset = 0x34;
> > +	} else {
> > +		pr_warning("snvs rtc: you use old dts file, please update it\n");
> 
> This should be pr_warn()

It should be dev_warn().

Shawn

^ permalink raw reply	[flat|nested] 27+ messages in thread

end of thread, other threads:[~2015-05-25  5:55 UTC | newest]

Thread overview: 27+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-05-21 16:16 [rtc-linux] [PATCH v3 0/6] Change snvs rtc and poweroff to use syscon add pwrkey driver Frank.Li
2015-05-21 16:16 ` Frank.Li at freescale.com
2015-05-21 16:16 ` Frank.Li
2015-05-21 16:16 ` [rtc-linux] [PATCH v3 1/6] rtc: arm: imx: snvs: change use syscon to access register Frank.Li
2015-05-21 16:16   ` Frank.Li at freescale.com
2015-05-21 16:16   ` Frank.Li
2015-05-22  8:07   ` [rtc-linux] " Alexandre Belloni
2015-05-22  8:07     ` Alexandre Belloni
2015-05-22  8:07     ` Alexandre Belloni
2015-05-25  5:54     ` [rtc-linux] " Shawn Guo
2015-05-25  5:54       ` Shawn Guo
2015-05-25  5:54       ` Shawn Guo
2015-05-21 16:16 ` [rtc-linux] [PATCH v3 2/6] Document: dt: fsl: snvs: change support syscon Frank.Li
2015-05-21 16:16   ` Frank.Li at freescale.com
2015-05-21 16:16   ` Frank.Li-KZfg59tc24xl57MIdRCFDg
2015-05-21 16:16 ` [rtc-linux] [PATCH v3 3/6] arm: dts: imx: update snvs to use syscon access register Frank.Li
2015-05-21 16:16   ` Frank.Li at freescale.com
2015-05-21 16:16   ` Frank.Li
2015-05-21 16:16 ` [rtc-linux] [PATCH v3 4/6] input: keyboard: imx: add snvs power key driver Frank.Li
2015-05-21 16:16   ` Frank.Li at freescale.com
2015-05-21 16:16   ` Frank.Li
2015-05-21 16:16 ` [rtc-linux] [PATCH v3 5/6] document: devicetree: input: imx: i.mx snvs power device tree bindings Frank.Li
2015-05-21 16:16   ` Frank.Li at freescale.com
2015-05-21 16:16   ` Frank.Li
2015-05-21 16:16 ` [rtc-linux] [PATCH v3 6/6] arm: dts: imx6sx: enable snvs power key Frank.Li
2015-05-21 16:16   ` Frank.Li at freescale.com
2015-05-21 16:16   ` Frank.Li

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.