All of lore.kernel.org
 help / color / mirror / Atom feed
From: Joe Perches <joe@perches.com>
To: Sagar Dharia <sdharia@codeaurora.org>
Cc: gregkh@linuxfoundation.org, broonie@kernel.org,
	linux-kernel@vger.kernel.org, bp@suse.de, poeschel@lemonage.de,
	santosh.shilimkar@ti.com, treding@nvidia.com,
	gong.chen@linux.intel.com, andreas.noever@gmail.com,
	Alan Ma <alan@linux.intel.com>,
	kheitke@audience.com, mlocke@codeaurora.org,
	linux-arm-msm@vger.kernel.org
Subject: re: [PATCH 1/3] SLIMbus: Device management on SLIMbus
Date: Sun, 14 Jun 2015 06:20:25 -0700	[thread overview]
Message-ID: <1434288025.2507.19.camel@perches.com> (raw)
In-Reply-To: <E1Z47g1-0006FM-D4@feisty.vs19.net>

> SLIMbus (Serial Low Power Interchip Media Bus) is a specification
> developed by MIPI (Mobile Industry Processor Interface) alliance.
> SLIMbus is a 2-wire implementation, which is used to communicate with
> peripheral components like audio-codec.

Perhaps these trivial style things could be considered

Use kernel-doc style /**
Argument alignment
Add newlines to logging formats
Convert if/else to if
Rename int slim_compare_eaddr to bool slim_eaddr_equal
---
 drivers/slimbus/slimbus.c | 152 ++++++++++++++++++++++------------------------
 include/linux/slimbus.h   |  72 ++++++++++++----------
 2 files changed, 111 insertions(+), 113 deletions(-)

diff --git a/drivers/slimbus/slimbus.c b/drivers/slimbus/slimbus.c
index be4f2c7..278e5a1 100644
--- a/drivers/slimbus/slimbus.c
+++ b/drivers/slimbus/slimbus.c
@@ -25,22 +25,21 @@ static DEFINE_IDR(ctrl_idr);
 static struct device_type slim_dev_type;
 static struct device_type slim_ctrl_type;
 
-static int slim_compare_eaddr(struct slim_eaddr *a, struct slim_eaddr *b)
+static bool slim_eaddr_equal(struct slim_eaddr *a, struct slim_eaddr *b)
 {
-	if (a->manf_id == b->manf_id && a->prod_code == b->prod_code &&
-			a->dev_index == b->dev_index &&
-			a->instance == b->instance)
-		return 0;
-	return -EIO;
+	return (a->manf_id == b->manf_id &&
+		a->prod_code == b->prod_code &&
+		a->dev_index == b->dev_index &&
+		a->instance == b->instance);
 }
 
-static const struct slim_device_id *slim_match(const struct slim_device_id *id,
-					const struct slim_device *slim_dev)
+static const struct slim_device_id *
+slim_match(const struct slim_device_id *id, const struct slim_device *slim_dev)
 {
 	while (id->manf_id != 0 || id->prod_code != 0) {
 		if (id->manf_id == slim_dev->e_addr.manf_id &&
-				id->prod_code == slim_dev->e_addr.prod_code &&
-				id->dev_index == slim_dev->e_addr.dev_index)
+		    id->prod_code == slim_dev->e_addr.prod_code &&
+		    id->dev_index == slim_dev->e_addr.dev_index)
 			return id;
 		id++;
 	}
@@ -52,10 +51,10 @@ static int slim_device_match(struct device *dev, struct device_driver *driver)
 	struct slim_device *slim_dev;
 	struct slim_driver *drv = to_slim_driver(driver);
 
-	if (dev->type == &slim_dev_type)
-		slim_dev = to_slim_device(dev);
-	else
+	if (dev->type != &slim_dev_type)
 		return 0;
+
+	slim_dev = to_slim_device(dev);
 	if (drv->id_table)
 		return slim_match(drv->id_table, slim_dev) != NULL;
 	return 0;
@@ -65,14 +64,13 @@ static int slim_device_probe(struct device *dev)
 {
 	struct slim_device	*slim_dev;
 	struct slim_driver	*driver;
-	struct slim_controller *ctrl;
+	struct slim_controller	*ctrl;
 	int status = 0;
 
-	if (dev->type == &slim_dev_type)
-		slim_dev = to_slim_device(dev);
-	else
+	if (dev->type != &slim_dev_type)
 		return -ENXIO;
 
+	slim_dev = to_slim_device(dev);
 	driver = to_slim_driver(dev->driver);
 	if (!driver->id_table)
 		return -ENODEV;
@@ -95,13 +93,13 @@ static int slim_device_remove(struct device *dev)
 	struct slim_driver *driver;
 	int status = 0;
 
-	if (dev->type == &slim_dev_type)
-		slim_dev = to_slim_device(dev);
-	else
+	if (dev->type != &slim_dev_type)
 		return -ENXIO;
 
 	if (!dev->driver)
 		return 0;
+
+	slim_dev = to_slim_device(dev);
 	driver = to_slim_driver(dev->driver);
 	if (driver->remove)
 		status = driver->remove(slim_dev);
@@ -117,13 +115,11 @@ static void slim_device_shutdown(struct device *dev)
 	struct slim_device *slim_dev;
 	struct slim_driver *driver;
 
-	if (dev->type == &slim_dev_type)
-		slim_dev = to_slim_device(dev);
-	else
+	if (dev->type != &slim_dev_type)
 		return;
-
 	if (!dev->driver)
 		return;
+	slim_dev = to_slim_device(dev);
 	driver = to_slim_driver(dev->driver);
 	if (driver->shutdown)
 		driver->shutdown(slim_dev);
@@ -135,20 +131,18 @@ static int slim_pm_suspend(struct device *dev)
 {
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
-	if (pm)
-		return pm_generic_suspend(dev);
-	else
+	if (!pm)
 		return 0;
+	return pm_generic_suspend(dev);
 }
 
 static int slim_pm_resume(struct device *dev)
 {
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
-	if (pm)
-		return pm_generic_resume(dev);
-	else
+	if (!pm)
 		return 0;
+	return pm_generic_resume(dev);
 }
 
 #else
@@ -159,12 +153,9 @@ static int slim_pm_resume(struct device *dev)
 static const struct dev_pm_ops slimbus_pm = {
 	.suspend = slim_pm_suspend,
 	.resume = slim_pm_resume,
-	SET_RUNTIME_PM_OPS(
-		pm_generic_suspend,
-		pm_generic_resume,
-		NULL
-		)
+	SET_RUNTIME_PM_OPS(pm_generic_suspend, pm_generic_resume, NULL)
 };
+
 struct bus_type slimbus_type = {
 	.name		= "slimbus",
 	.match		= slim_device_match,
@@ -257,13 +248,13 @@ static struct device_type slim_dev_type = {
 static void slim_report(struct work_struct *work)
 {
 	struct slim_driver *sbdrv;
-	struct slim_device *sbdev =
-			container_of(work, struct slim_device, wd);
+	struct slim_device *sbdev = container_of(work, struct slim_device, wd);
+
 	if (!sbdev->dev.driver)
 		return;
 	/* check if device-up or down needs to be called */
 	if ((!sbdev->reported && !sbdev->notified) ||
-			(sbdev->reported && sbdev->notified))
+	    (sbdev->reported && sbdev->notified))
 		return;
 
 	sbdrv = to_slim_driver(sbdev->dev.driver);
@@ -282,7 +273,7 @@ static void slim_report(struct work_struct *work)
 	}
 }
 
-/*
+/**
  * slim_add_device: Add a new device without register board info.
  * @ctrl: Controller to which this device is to be added to.
  * Called when device doesn't have an explicit client-driver to be probed, or
@@ -298,15 +289,15 @@ int slim_add_device(struct slim_controller *ctrl, struct slim_device *sbdev)
 	slim_ctrl_get(ctrl);
 	if (!sbdev->name) {
 		sbdev->name = kcalloc(SLIMBUS_NAME_SIZE, sizeof(char),
-					GFP_KERNEL);
+				      GFP_KERNEL);
 		if (!sbdev->name)
 			return -ENOMEM;
 		snprintf(sbdev->name, SLIMBUS_NAME_SIZE, "0x%x:0x%x:0x%x:0x%x",
-				sbdev->e_addr.manf_id, sbdev->e_addr.prod_code,
-				sbdev->e_addr.dev_index,
-				sbdev->e_addr.instance);
+			 sbdev->e_addr.manf_id, sbdev->e_addr.prod_code,
+			 sbdev->e_addr.dev_index,
+			 sbdev->e_addr.instance);
 	}
-	dev_dbg(&ctrl->dev, "adding device:%s", sbdev->name);
+	dev_dbg(&ctrl->dev, "adding device: %s\n", sbdev->name);
 	dev_set_name(&sbdev->dev, "%s", sbdev->name);
 	INIT_WORK(&sbdev->wd, slim_report);
 	mutex_lock(&ctrl->m_ctrl);
@@ -328,7 +319,7 @@ static DEFINE_MUTEX(board_lock);
 
 /* If controller is not present, only add to boards list */
 static void slim_match_ctrl_to_boardinfo(struct slim_controller *ctrl,
-				struct slim_boardinfo *bi)
+					 struct slim_boardinfo *bi)
 {
 	int ret;
 
@@ -337,7 +328,7 @@ static void slim_match_ctrl_to_boardinfo(struct slim_controller *ctrl,
 
 	ret = slim_add_device(ctrl, bi->slim_slave);
 	if (ret != 0)
-		dev_err(ctrl->dev.parent, "can't create new device %s, ret:%d",
+		dev_err(ctrl->dev.parent, "can't create new device %s, ret:%d\n",
 			bi->slim_slave->name, ret);
 }
 
@@ -371,7 +362,7 @@ int slim_register_board_info(struct slim_boardinfo const *info, unsigned n)
 }
 EXPORT_SYMBOL(slim_register_board_info);
 
-/*
+/**
  * slim_ctrl_add_boarddevs: Add devices registered by board-info
  * @ctrl: Controller to which these devices are to be added to.
  * This API is called by controller when it is up and running.
@@ -413,8 +404,8 @@ static int slim_register_controller(struct slim_controller *ctrl)
 	if (ret)
 		goto out_list;
 
-	dev_dbg(&ctrl->dev, "Bus [%s] registered:dev:%p\n", ctrl->name,
-							&ctrl->dev);
+	dev_dbg(&ctrl->dev, "Bus [%s] registered:dev:%p\n",
+		ctrl->name, &ctrl->dev);
 
 	INIT_LIST_HEAD(&ctrl->devs);
 	ctrl->wq = create_singlethread_workqueue(dev_name(&ctrl->dev));
@@ -445,15 +436,15 @@ void slim_remove_device(struct slim_device *sbdev)
 EXPORT_SYMBOL(slim_remove_device);
 
 static void slim_ctrl_remove_device(struct slim_controller *ctrl,
-				struct slim_boardinfo *bi)
+				    struct slim_boardinfo *bi)
 {
 	if (ctrl->nr == bi->bus_num)
 		slim_remove_device(bi->slim_slave);
 }
 
-/*
+/**
  * slim_del_controller: Controller tear-down.
- * Controller added with the above API is teared down using this API.
+ * @ctrl: Controller to tear-down.
  */
 int slim_del_controller(struct slim_controller *ctrl)
 {
@@ -488,7 +479,7 @@ int slim_del_controller(struct slim_controller *ctrl)
 }
 EXPORT_SYMBOL(slim_del_controller);
 
-/*
+/**
  * slim_add_numbered_controller: Controller bring-up.
  * @ctrl: Controller to be registered.
  * A controller is registered with the framework using this API. ctrl->nr is the
@@ -511,7 +502,7 @@ int slim_add_numbered_controller(struct slim_controller *ctrl)
 }
 EXPORT_SYMBOL(slim_add_numbered_controller);
 
-/*
+/**
  * slim_report_absent: Controller calls this function when a device
  *	reports absent, OR when the device cannot be communicated with
  * @sbdev: Device that cannot be reached, or sent report absent
@@ -538,13 +529,14 @@ void slim_report_absent(struct slim_device *sbdev)
 }
 EXPORT_SYMBOL(slim_report_absent);
 
-/*
+/**
  * slim_framer_booted: This function is called by controller after the active
  * framer has booted (using Bus Reset sequence, or after it has shutdown and has
- * come back up). Components, devices on the bus may be in undefined state,
- * and this function triggers their drivers to do the needful
- * to bring them back in Reset state so that they can acquire sync, report
- * present and be operational again.
+ * come back up).
+ * @ctrl: Controller
+ * Components, devices on the bus may be in undefined state, and this function
+ * triggers their drivers to do the needful to bring them back in Reset state
+ * so that they can acquire sync, report present and be operational again.
  */
 void slim_framer_booted(struct slim_controller *ctrl)
 {
@@ -570,7 +562,7 @@ void slim_framer_booted(struct slim_controller *ctrl)
 }
 EXPORT_SYMBOL(slim_framer_booted);
 
-/*
+/**
  * slim_query_device: Query and get handle to a device.
  * @ctrl: Controller on which this device will be added/queried
  * @e_addr: Enumeration address of the device to be queried
@@ -578,7 +570,7 @@ EXPORT_SYMBOL(slim_framer_booted);
  * device and returns pointer to it if the device has not yet enumerated.
  */
 struct slim_device *slim_query_device(struct slim_controller *ctrl,
-					struct slim_eaddr *e_addr)
+				      struct slim_eaddr *e_addr)
 {
 	struct slim_device *slim = NULL;
 	struct sbi_boardinfo *bi;
@@ -588,8 +580,8 @@ struct slim_device *slim_query_device(struct slim_controller *ctrl,
 	list_for_each_entry(bi, &board_list, list) {
 		if (bi->board_info.bus_num != ctrl->nr)
 			continue;
-		if (slim_compare_eaddr(&bi->board_info.slim_slave->e_addr,
-				e_addr) == 0) {
+		if (slim_eaddr_equal(&bi->board_info.slim_slave->e_addr,
+				     e_addr)) {
 			slim = bi->board_info.slim_slave;
 			break;
 		}
@@ -600,14 +592,14 @@ struct slim_device *slim_query_device(struct slim_controller *ctrl,
 
 	mutex_lock(&ctrl->m_ctrl);
 	list_for_each_entry(slim, &ctrl->devs, dev_list) {
-		if (slim_compare_eaddr(&slim->e_addr, e_addr) == 0) {
+		if (slim_eaddr_equal(&slim->e_addr, e_addr)) {
 			mutex_unlock(&ctrl->m_ctrl);
 			return slim;
 		}
 	}
 	mutex_unlock(&ctrl->m_ctrl);
 
-	slim = kcalloc(1, sizeof(struct slim_device), GFP_KERNEL);
+	slim = kzalloc(sizeof(struct slim_device), GFP_KERNEL);
 	if (IS_ERR(slim))
 		return NULL;
 	slim->e_addr = *e_addr;
@@ -620,13 +612,13 @@ struct slim_device *slim_query_device(struct slim_controller *ctrl,
 EXPORT_SYMBOL(slim_query_device);
 
 static int ctrl_getaddr_entry(struct slim_controller *ctrl,
-				struct slim_eaddr *eaddr, u8 *entry)
+			      struct slim_eaddr *eaddr, u8 *entry)
 {
 	int i;
 
 	for (i = 0; i < ctrl->num_dev; i++) {
 		if (ctrl->addrt[i].valid &&
-		slim_compare_eaddr(&ctrl->addrt[i].eaddr, eaddr) == 0) {
+		    slim_eaddr_equal(&ctrl->addrt[i].eaddr, eaddr)) {
 			*entry = i;
 			return 0;
 		}
@@ -634,21 +626,21 @@ static int ctrl_getaddr_entry(struct slim_controller *ctrl,
 	return -ENXIO;
 }
 
-/*
+/**
  * slim_assign_laddr: Assign logical address to a device enumerated.
  * @ctrl: Controller with which device is enumerated.
  * @e_addr: Enumeration address of the device.
-  * @laddr: Return logical address (if valid flag is false)
-  * @valid: true if laddr holds a valid address that controller wants to
-  *	set for this enumeration address. Otherwise framework sets index into
-  *	address table as logical address.
+ * @laddr: Return logical address (if valid flag is false)
+ * @valid: true if laddr holds a valid address that controller wants to
+ *	set for this enumeration address. Otherwise framework sets index into
+ *	address table as logical address.
  * Called by controller in response to REPORT_PRESENT. Framework will assign
  * a logical address to this enumeration address.
  * Function returns -EXFULL to indicate that all logical addresses are already
  * taken.
  */
 int slim_assign_laddr(struct slim_controller *ctrl, struct slim_eaddr *e_addr,
-				u8 *laddr, bool valid)
+		      u8 *laddr, bool valid)
 {
 	int ret;
 	u8 i = 0;
@@ -701,9 +693,9 @@ ret_assigned_laddr:
 	if (exists || ret)
 		return ret;
 
-	pr_info("setting slimbus l-addr:%x, ea:%x,%x,%x,%x",
-				*laddr, e_addr->manf_id, e_addr->prod_code,
-				e_addr->dev_index, e_addr->instance);
+	pr_info("setting slimbus l-addr:%x, ea:%x,%x,%x,%x\n",
+		*laddr, e_addr->manf_id, e_addr->prod_code,
+		e_addr->dev_index, e_addr->instance);
 	/*
 	 * Add this device to list of devices on this controller if it's
 	 * not already present
@@ -727,17 +719,17 @@ ret_assigned_laddr:
 }
 EXPORT_SYMBOL(slim_assign_laddr);
 
-/*
+/**
  * slim_get_logical_addr: Return the logical address of a slimbus device.
  * @sb: client handle requesting the adddress.
  * @e_addr: Enumeration address of the device.
  * @laddr: output buffer to store the address
  * context: can sleep
- * -EINVAL is returned in case of invalid parameters, and -ENXIO is returned if
- *  the device with this enumeration address is not found.
+ * -EINVAL is returned in case of invalid parameters
+ * -ENXIO is returned if the device with this enumeration address is not found
  */
 int slim_get_logical_addr(struct slim_device *sb, struct slim_eaddr *e_addr,
-				u8 *laddr)
+			  u8 *laddr)
 {
 	int ret;
 	u8 entry;
diff --git a/include/linux/slimbus.h b/include/linux/slimbus.h
index 05b7594..ed93da0 100644
--- a/include/linux/slimbus.h
+++ b/include/linux/slimbus.h
@@ -37,7 +37,7 @@ extern struct bus_type slimbus_type;
 struct slim_controller;
 struct slim_device;
 
-/*
+/**
  * struct slim_eaddr: Enumeration address for a slimbus device
  * @manf_id: Manufacturer Id for the device
  * @prod_code: Product code
@@ -51,7 +51,7 @@ struct slim_eaddr {
 	u8 instance;
 };
 
-/*
+/**
  * struct slim_framer - Represents Slimbus framer.
  * Every controller may have multiple framers. There is 1 active framer device
  * responsible for clocking the bus.
@@ -66,9 +66,10 @@ struct slim_framer {
 	int			rootfreq;
 	int			superfreq;
 };
+
 #define to_slim_framer(d) container_of(d, struct slim_framer, dev)
 
-/*
+/**
  * struct slim_addrt: slimbus address used internally by the slimbus framework.
  * @valid: If the device is present. Valid is set to false when device reports
  *	absent.
@@ -102,7 +103,7 @@ struct slim_addrt {
 #define SLIM_MSG_DEST_ENUMADDR		1
 #define	SLIM_MSG_DEST_BROADCAST		3
 
-/*
+/**
  * struct slim_controller: Controls every instance of SLIMbus
  *				(similar to 'master' on SPI)
  *	'Manager device' is responsible for  device management, bandwidth
@@ -165,13 +166,14 @@ struct slim_controller {
 	struct workqueue_struct *wq;
 	struct completion	dev_released;
 	int			(*set_laddr)(struct slim_controller *ctrl,
-				struct slim_eaddr *ea, u8 laddr);
+					     struct slim_eaddr *ea, u8 laddr);
 	int			(*get_laddr)(struct slim_controller *ctrl,
-				struct slim_eaddr *ea, u8 *laddr);
+					     struct slim_eaddr *ea, u8 *laddr);
 };
+
 #define to_slim_controller(d) container_of(d, struct slim_controller, dev)
 
-/*
+/**
  * struct slim_driver: Slimbus 'generic device' (slave) device driver
  *				(similar to 'spi_device' on SPI)
  * @probe: Binds this driver to a slimbus device.
@@ -196,7 +198,7 @@ struct slim_driver {
 	int				(*remove)(struct slim_device *sl);
 	void				(*shutdown)(struct slim_device *sl);
 	int				(*suspend)(struct slim_device *sl,
-					pm_message_t pmesg);
+						   pm_message_t pmesg);
 	int				(*resume)(struct slim_device *sl);
 	int				(*device_up)(struct slim_device *sl);
 	int				(*device_down)(struct slim_device *sl);
@@ -205,9 +207,10 @@ struct slim_driver {
 	struct device_driver		driver;
 	const struct slim_device_id	*id_table;
 };
+
 #define to_slim_driver(d) container_of(d, struct slim_driver, driver)
 
-/*
+/**
  * Client/device handle (struct slim_device):
  * ------------------------------------------
  *  This is the client/device handle returned when a slimbus
@@ -242,9 +245,10 @@ struct slim_device {
 	struct list_head	dev_list;
 	struct work_struct	wd;
 };
+
 #define to_slim_device(d) container_of(d, struct slim_device, dev)
 
-/*
+/**
  * struct slim_boardinfo: Declare board info for Slimbus device bringup.
  * @bus_num: Controller number (bus) on which this device will sit.
  * @slim_slave: Device to be registered with slimbus.
@@ -256,7 +260,7 @@ struct slim_boardinfo {
 
 /* Manager's logical address is set to 0xFF per spec */
 #define SLIM_LA_MANAGER 0xFF
-/*
+/**
  * slim_get_logical_addr: Return the logical address of a slimbus device.
  * @sb: client handle requesting the adddress.
  * @e_addr: Enumeration address of the device.
@@ -266,51 +270,53 @@ struct slim_boardinfo {
  *  the device with this elemental address is not found.
  */
 
-extern int slim_get_logical_addr(struct slim_device *sb,
-				struct slim_eaddr *e_addr, u8 *laddr);
+int slim_get_logical_addr(struct slim_device *sb,
+			  struct slim_eaddr *e_addr, u8 *laddr);
 
-/*
+/**
  * slim_driver_register: Client driver registration with slimbus
  * @drv:Client driver to be associated with client-device.
  * This API will register the client driver with the slimbus
  * It is called from the driver's module-init function.
  */
-extern int slim_driver_register(struct slim_driver *drv);
+int slim_driver_register(struct slim_driver *drv);
 
 /*
  * slim_driver_unregister: Undo effects of slim_driver_register
  * @drv: Client driver to be unregistered
  */
-extern void slim_driver_unregister(struct slim_driver *drv);
+void slim_driver_unregister(struct slim_driver *drv);
 
-/*
+/**
  * slim_add_numbered_controller: Controller bring-up.
  * @ctrl: Controller to be registered.
  * A controller is registered with the framework using this API. ctrl->nr is the
  * desired number with which slimbus framework registers the controller.
  * Function will return -EBUSY if the number is in use.
  */
-extern int slim_add_numbered_controller(struct slim_controller *ctrl);
+int slim_add_numbered_controller(struct slim_controller *ctrl);
 
 /*
  * slim_del_controller: Controller tear-down.
+ * @ctrl: Controller to be torn-down.
  * Controller added with the above API is teared down using this API.
  */
-extern int slim_del_controller(struct slim_controller *ctrl);
+int slim_del_controller(struct slim_controller *ctrl);
 
-/*
+/**
  * slim_add_device: Add a new device without register board info.
  * @ctrl: Controller to which this device is to be added to.
+ * @sbdev: slim_device to add
  * Called when device doesn't have an explicit client-driver to be probed, or
  * the client-driver is a module installed dynamically.
  */
-extern int slim_add_device(struct slim_controller *ctrl,
-			struct slim_device *sbdev);
+int slim_add_device(struct slim_controller *ctrl,
+		    struct slim_device *sbdev);
 
 /* slim_remove_device: Remove the effect of slim_add_device() */
-extern void slim_remove_device(struct slim_device *sbdev);
+void slim_remove_device(struct slim_device *sbdev);
 
-/*
+/**
  * slim_assign_laddr: Assign logical address to a device enumerated.
  * @ctrl: Controller with which device is enumerated.
  * @e_addr: Enumeration address of the device.
@@ -323,10 +329,10 @@ extern void slim_remove_device(struct slim_device *sbdev);
  * Function returns -EXFULL to indicate that all logical addresses are already
  * taken.
  */
-extern int slim_assign_laddr(struct slim_controller *ctrl,
-			struct slim_eaddr *e_addr, u8 *laddr, bool valid);
+int slim_assign_laddr(struct slim_controller *ctrl,
+		      struct slim_eaddr *e_addr, u8 *laddr, bool valid);
 
-/*
+/**
  * slim_report_absent: Controller calls this function when a device
  *	reports absent, OR when the device cannot be communicated with
  * @sbdev: Device that cannot be reached, or that sent report absent
@@ -343,16 +349,16 @@ void slim_report_absent(struct slim_device *sbdev);
  */
 void slim_framer_booted(struct slim_controller *ctrl);
 
-/*
+/**
  * slim_ctrl_add_boarddevs: Add devices registered by board-info
  * @ctrl: Controller to which these devices are to be added to.
  * This API is called by controller when it is up and running.
  * If devices on a controller were registered before controller,
  * this will make sure that they get probed when controller is up
  */
-extern void slim_ctrl_add_boarddevs(struct slim_controller *ctrl);
+void slim_ctrl_add_boarddevs(struct slim_controller *ctrl);
 
-/*
+/**
  * slim_register_board_info: Board-initialization routine.
  * @info: List of all devices on all controllers present on the board.
  * @n: number of entries.
@@ -360,11 +366,11 @@ extern void slim_ctrl_add_boarddevs(struct slim_controller *ctrl);
  * Called from board-init function.
  */
 #ifdef CONFIG_SLIMBUS
-extern int slim_register_board_info(struct slim_boardinfo const *info,
-					unsigned n);
+int slim_register_board_info(struct slim_boardinfo const *info,
+			     unsigned n);
 #else
 static inline int slim_register_board_info(struct slim_boardinfo const *info,
-					unsigned n)
+					   unsigned n)
 {
 	return 0;
 }

       reply	other threads:[~2015-06-14 13:20 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <E1Z47g1-0006FM-D4@feisty.vs19.net>
2015-06-14 13:20 ` Joe Perches [this message]
2015-06-14  5:49 [PATCH 0/3] Introduce framework for SLIMbus device drivers Sagar Dharia
2015-06-14  5:49 ` [PATCH 1/3] SLIMbus: Device management on SLIMbus Sagar Dharia
2015-06-15 10:54   ` Mark Brown
2015-06-16 15:22     ` Sagar Dharia
2015-06-17 11:45       ` Mark Brown
2015-06-17 17:10         ` Sagar Dharia
2015-06-18 21:23   ` Srinivas Kandagatla
2015-06-19  3:48     ` Sagar Dharia

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1434288025.2507.19.camel@perches.com \
    --to=joe@perches.com \
    --cc=alan@linux.intel.com \
    --cc=andreas.noever@gmail.com \
    --cc=bp@suse.de \
    --cc=broonie@kernel.org \
    --cc=gong.chen@linux.intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=kheitke@audience.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mlocke@codeaurora.org \
    --cc=poeschel@lemonage.de \
    --cc=santosh.shilimkar@ti.com \
    --cc=sdharia@codeaurora.org \
    --cc=treding@nvidia.com \
    --subject='re: [PATCH 1/3] SLIMbus: Device management on SLIMbus' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.