* [PATCH v2 0/3] Add DT support for netxbig LEDs
@ 2015-06-18 11:52 ` Simon Guinot
0 siblings, 0 replies; 20+ messages in thread
From: Simon Guinot @ 2015-06-18 11:52 UTC (permalink / raw)
To: Bryan Wu, Richard Purdie, Jason Cooper, Andrew Lunn,
Gregory Clement, Sebastian Hesselbarth
Cc: Vincent Donnefort, Dan Carpenter, linux-arm-kernel, linux-leds,
Jacek Anaszewski
Hello,
This patch series adds DT support for the LEDs found on the Kirkwood-based
LaCie boards 2Big and 5Big Network v2.
Changes since v1:
- Check timer mode value retrieved from DT.
- In netxbig_leds_get_of_pdata, don't use unsigned long variables to get
timer delay values from DT with function of_property_read_u32_index.
Instead, use a temporary u32 variable. This allows to silence a static
checker warning.
- Make timer property optional in the binding documentation. It is now
aligned with the driver code.
Simon
Simon Guinot (3):
leds: netxbig: add device tree binding
ARM: Kirkwood: add LED DT entries for netxbig boards
ARM: mvebu: remove static LED setup for netxbig boards
.../devicetree/bindings/gpio/netxbig-gpio-ext.txt | 22 ++
.../devicetree/bindings/leds/leds-netxbig.txt | 92 ++++++++
arch/arm/boot/dts/kirkwood-net5big.dts | 60 +++++
arch/arm/boot/dts/kirkwood-netxbig.dtsi | 80 +++++++
arch/arm/mach-mvebu/Kconfig | 7 -
arch/arm/mach-mvebu/Makefile | 1 -
arch/arm/mach-mvebu/board.h | 21 --
arch/arm/mach-mvebu/kirkwood.c | 4 -
arch/arm/mach-mvebu/netxbig.c | 191 ----------------
drivers/leds/leds-netxbig.c | 250 +++++++++++++++++++--
include/dt-bindings/leds/leds-netxbig.h | 18 ++
11 files changed, 501 insertions(+), 245 deletions(-)
create mode 100644 Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
create mode 100644 Documentation/devicetree/bindings/leds/leds-netxbig.txt
delete mode 100644 arch/arm/mach-mvebu/board.h
delete mode 100644 arch/arm/mach-mvebu/netxbig.c
create mode 100644 include/dt-bindings/leds/leds-netxbig.h
--
2.1.4
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v2 0/3] Add DT support for netxbig LEDs
@ 2015-06-18 11:52 ` Simon Guinot
0 siblings, 0 replies; 20+ messages in thread
From: Simon Guinot @ 2015-06-18 11:52 UTC (permalink / raw)
To: linux-arm-kernel
Hello,
This patch series adds DT support for the LEDs found on the Kirkwood-based
LaCie boards 2Big and 5Big Network v2.
Changes since v1:
- Check timer mode value retrieved from DT.
- In netxbig_leds_get_of_pdata, don't use unsigned long variables to get
timer delay values from DT with function of_property_read_u32_index.
Instead, use a temporary u32 variable. This allows to silence a static
checker warning.
- Make timer property optional in the binding documentation. It is now
aligned with the driver code.
Simon
Simon Guinot (3):
leds: netxbig: add device tree binding
ARM: Kirkwood: add LED DT entries for netxbig boards
ARM: mvebu: remove static LED setup for netxbig boards
.../devicetree/bindings/gpio/netxbig-gpio-ext.txt | 22 ++
.../devicetree/bindings/leds/leds-netxbig.txt | 92 ++++++++
arch/arm/boot/dts/kirkwood-net5big.dts | 60 +++++
arch/arm/boot/dts/kirkwood-netxbig.dtsi | 80 +++++++
arch/arm/mach-mvebu/Kconfig | 7 -
arch/arm/mach-mvebu/Makefile | 1 -
arch/arm/mach-mvebu/board.h | 21 --
arch/arm/mach-mvebu/kirkwood.c | 4 -
arch/arm/mach-mvebu/netxbig.c | 191 ----------------
drivers/leds/leds-netxbig.c | 250 +++++++++++++++++++--
include/dt-bindings/leds/leds-netxbig.h | 18 ++
11 files changed, 501 insertions(+), 245 deletions(-)
create mode 100644 Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
create mode 100644 Documentation/devicetree/bindings/leds/leds-netxbig.txt
delete mode 100644 arch/arm/mach-mvebu/board.h
delete mode 100644 arch/arm/mach-mvebu/netxbig.c
create mode 100644 include/dt-bindings/leds/leds-netxbig.h
--
2.1.4
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v2 1/3] leds: netxbig: add device tree binding
2015-06-18 11:52 ` Simon Guinot
@ 2015-06-18 11:52 ` Simon Guinot
-1 siblings, 0 replies; 20+ messages in thread
From: Simon Guinot @ 2015-06-18 11:52 UTC (permalink / raw)
To: Bryan Wu, Richard Purdie, Jason Cooper, Andrew Lunn,
Gregory Clement, Sebastian Hesselbarth
Cc: Vincent Donnefort, Dan Carpenter, linux-arm-kernel, linux-leds,
Jacek Anaszewski
This patch adds device tree support for the netxbig LEDs.
This also introduces a additionnal DT binding for the GPIO extension bus
(netxbig-gpio-ext) used to configure the LEDs. Since this bus could also
be used to control other devices, then it seems more suitable to have it
in a separate DT binding.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
---
Changes since v1:
- Check timer mode value retrieved from DT.
- In netxbig_leds_get_of_pdata, don't use unsigned long variables to get
timer delay values from DT with function of_property_read_u32_index.
Instead, use a temporary u32 variable. This allows to silence a static
checker warning.
- Make timer property optional in the binding documentation. It is now
aligned with the driver code.
.../devicetree/bindings/gpio/netxbig-gpio-ext.txt | 22 ++
.../devicetree/bindings/leds/leds-netxbig.txt | 92 ++++++++
drivers/leds/leds-netxbig.c | 250 +++++++++++++++++++--
include/dt-bindings/leds/leds-netxbig.h | 18 ++
4 files changed, 361 insertions(+), 21 deletions(-)
create mode 100644 Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
create mode 100644 Documentation/devicetree/bindings/leds/leds-netxbig.txt
create mode 100644 include/dt-bindings/leds/leds-netxbig.h
diff --git a/Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt b/Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
new file mode 100644
index 000000000000..e4fb2fe11086
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
@@ -0,0 +1,22 @@
+Binding for the GPIO extension bus found on some LaCie/Seagate boards
+(Example: 2Big/5Big Network v2, 2Big NAS).
+
+Required properties:
+- compatible: "lacie,netxbig-gpio-ext".
+- addr-gpios: GPIOs representing the address register.
+- data-gpios: GPIOs representing the data register.
+- enable-gpio: GPIO used to enable the new configuration (address, data).
+
+Example:
+
+netxbig_gpio_ext: netxbig-gpio-ext {
+ compatible = "lacie,netxbig-gpio-ext";
+
+ addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH
+ &gpio1 16 GPIO_ACTIVE_HIGH
+ &gpio1 17 GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH
+ &gpio1 13 GPIO_ACTIVE_HIGH
+ &gpio1 14 GPIO_ACTIVE_HIGH>;
+ enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-netxbig.txt b/Documentation/devicetree/bindings/leds/leds-netxbig.txt
new file mode 100644
index 000000000000..efadbecbfeb9
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-netxbig.txt
@@ -0,0 +1,92 @@
+Binding for the CPLD LEDs (GPIO extension bus) found on some LaCie/Seagate
+boards (Example: 2Big/5Big Network v2, 2Big NAS).
+
+Required properties:
+- compatible: "lacie,netxbig-leds".
+- gpio-ext: Phandle for the gpio-ext bus.
+
+Optional properties:
+- timers: Timer array. Each timer entry is represented by three integers:
+ Mode (gpio-ext bus), delay_on and delay_off.
+
+Each LED is represented as a sub-node of the netxbig-leds device.
+
+Required sub-node properties:
+- mode-addr: Mode register address on gpio-ext bus.
+- mode-val: Mode to value mapping. Each entry is represented by two integers:
+ A mode and the corresponding value on the gpio-ext bus.
+- bright-addr: Brightness register address on gpio-ext bus.
+- bright-max: Maximum brightness value.
+
+Optional sub-node properties:
+- label: Name for this LED. If omitted, the label is taken from the node name.
+- linux,default-trigger: Trigger assigned to the LED.
+
+Example:
+
+netxbig-leds {
+ compatible = "lacie,netxbig-leds";
+
+ gpio-ext = &gpio_ext;
+
+ timers = <NETXBIG_LED_TIMER1 500 500
+ NETXBIG_LED_TIMER2 500 1000>;
+
+ blue-power {
+ label = "netxbig:blue:power";
+ mode-addr = <0>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 1
+ NETXBIG_LED_TIMER1 3
+ NETXBIG_LED_TIMER2 7>;
+ bright-addr = <1>;
+ bright-max = <7>;
+ };
+ red-power {
+ label = "netxbig:red:power";
+ mode-addr = <0>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <1>;
+ bright-max = <7>;
+ };
+ blue-sata0 {
+ label = "netxbig:blue:sata0";
+ mode-addr = <3>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ red-sata0 {
+ label = "netxbig:red:sata0";
+ mode-addr = <3>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ blue-sata1 {
+ label = "netxbig:blue:sata1";
+ mode-addr = <4>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ red-sata1 {
+ label = "netxbig:red:sata1";
+ mode-addr = <4>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+};
diff --git a/drivers/leds/leds-netxbig.c b/drivers/leds/leds-netxbig.c
index 25e419752a7b..a0e3677348b3 100644
--- a/drivers/leds/leds-netxbig.c
+++ b/drivers/leds/leds-netxbig.c
@@ -26,6 +26,7 @@
#include <linux/spinlock.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/of_gpio.h>
#include <linux/leds.h>
#include <linux/platform_data/leds-kirkwood-netxbig.h>
@@ -140,6 +141,11 @@ struct netxbig_led_data {
spinlock_t lock;
};
+struct netxbig_led_priv {
+ struct netxbig_led_platform_data *pdata;
+ struct netxbig_led_data leds_data[];
+};
+
static int netxbig_led_get_timer_mode(enum netxbig_led_mode *mode,
unsigned long delay_on,
unsigned long delay_off,
@@ -304,12 +310,12 @@ static void delete_netxbig_led(struct netxbig_led_data *led_dat)
led_classdev_unregister(&led_dat->cdev);
}
-static int
-create_netxbig_led(struct platform_device *pdev,
- struct netxbig_led_data *led_dat,
- const struct netxbig_led *template)
+static int create_netxbig_led(struct platform_device *pdev, int led,
+ struct netxbig_led_priv *priv)
{
- struct netxbig_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct netxbig_led_platform_data *pdata = priv->pdata;
+ struct netxbig_led_data *led_dat = &priv->leds_data[led];
+ const struct netxbig_led *template = &priv->pdata->leds[led];
spin_lock_init(&led_dat->lock);
led_dat->gpio_ext = pdata->gpio_ext;
@@ -346,38 +352,241 @@ create_netxbig_led(struct platform_device *pdev,
return led_classdev_register(&pdev->dev, &led_dat->cdev);
}
+#ifdef CONFIG_OF_GPIO
+static int gpio_ext_get_of_pdata(struct device *dev, struct device_node *np,
+ struct netxbig_gpio_ext *gpio_ext)
+{
+ int *addr, *data;
+ int num_addr, num_data;
+ int ret;
+ int i;
+
+ ret = of_gpio_named_count(np, "addr-gpios");
+ if (ret < 0)
+ return ret;
+ num_addr = ret;
+ addr = devm_kzalloc(dev, num_addr * sizeof(unsigned int), GFP_KERNEL);
+ if (!addr)
+ return -ENOMEM;
+
+ for (i = 0; i < num_addr; i++) {
+ ret = of_get_named_gpio(np, "addr-gpios", i);
+ if (ret < 0)
+ return ret;
+ addr[i] = ret;
+ }
+ gpio_ext->addr = addr;
+ gpio_ext->num_addr = num_addr;
+
+ ret = of_gpio_named_count(np, "data-gpios");
+ if (ret < 0)
+ return ret;
+ num_data = ret;
+ data = devm_kzalloc(dev, num_data * sizeof(unsigned int), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ for (i = 0; i < num_data; i++) {
+ ret = of_get_named_gpio(np, "data-gpios", i);
+ if (ret < 0)
+ return ret;
+ data[i] = ret;
+ }
+ gpio_ext->data = data;
+ gpio_ext->num_data = num_data;
+
+ ret = of_get_named_gpio(np, "enable-gpio", 0);
+ if (ret < 0)
+ return ret;
+ gpio_ext->enable = ret;
+
+ return 0;
+}
+
+static int netxbig_leds_get_of_pdata(struct device *dev,
+ struct netxbig_led_platform_data *pdata)
+{
+ struct device_node *np = dev->of_node;
+ struct device_node *gpio_ext_np;
+ struct device_node *child;
+ struct netxbig_gpio_ext *gpio_ext;
+ struct netxbig_led_timer *timers;
+ struct netxbig_led *leds, *led;
+ int num_timers;
+ int num_leds = 0;
+ int ret;
+ int i;
+
+ /* GPIO extension */
+ gpio_ext_np = of_parse_phandle(np, "gpio-ext", 0);
+ if (!gpio_ext_np)
+ return -EINVAL;
+
+ gpio_ext = devm_kzalloc(dev, sizeof(struct netxbig_gpio_ext),
+ GFP_KERNEL);
+ if (!gpio_ext)
+ return -ENOMEM;
+ ret = gpio_ext_get_of_pdata(dev, gpio_ext_np, gpio_ext);
+ if (ret)
+ return ret;
+ of_node_put(gpio_ext_np);
+ pdata->gpio_ext = gpio_ext;
+
+ /* Timers (optional) */
+ ret = of_property_count_u32_elems(np, "timers");
+ if (ret > 0) {
+ if (ret % 3)
+ return -EINVAL;
+ num_timers = ret / 3;
+ timers = devm_kzalloc(dev,
+ num_timers * sizeof(struct netxbig_led_timer),
+ GFP_KERNEL);
+ if (!timers)
+ return -ENOMEM;
+ for (i = 0; i < num_timers; i++) {
+ u32 tmp;
+
+ of_property_read_u32_index(np, "timers", 3 * i,
+ &timers[i].mode);
+ if (timers[i].mode >= NETXBIG_LED_MODE_NUM)
+ return -EINVAL;
+ of_property_read_u32_index(np, "timers",
+ 3 * i + 1, tmp);
+ timers[i].delay_on = tmp;
+ of_property_read_u32_index(np, "timers",
+ 3 * i + 2, tmp);
+ timers[i].delay_off = tmp;
+ }
+ pdata->timer = timers;
+ pdata->num_timer = num_timers;
+ }
+
+ /* LEDs */
+ num_leds = of_get_child_count(np);
+ if (!num_leds)
+ return -ENODEV;
+
+ leds = devm_kzalloc(dev, num_leds * sizeof(struct netxbig_led),
+ GFP_KERNEL);
+ if (!leds)
+ return -ENOMEM;
+
+ led = leds;
+ for_each_child_of_node(np, child) {
+ const char *string;
+ int *mode_val;
+ int num_modes;
+
+ if (!of_property_read_string(child, "label", &string))
+ led->name = string;
+ else
+ led->name = child->name;
+
+ if (!of_property_read_string(child,
+ "linux,default-trigger", &string))
+ led->default_trigger = string;
+
+ if (of_property_read_u32(child, "mode-addr",
+ &led->mode_addr))
+ return -EINVAL;
+
+ if (of_property_read_u32(child, "bright-addr",
+ &led->bright_addr))
+ return -EINVAL;
+
+ mode_val = devm_kzalloc(dev,
+ NETXBIG_LED_MODE_NUM * sizeof(int),
+ GFP_KERNEL);
+ if (!mode_val)
+ return -ENOMEM;
+
+ for (i = 0; i < NETXBIG_LED_MODE_NUM; i++)
+ mode_val[i] = NETXBIG_LED_INVALID_MODE;
+
+ ret = of_property_count_u32_elems(child, "mode-val");
+ if (ret < 0 || ret % 2)
+ return -EINVAL;
+ num_modes = ret / 2;
+ if (num_modes > NETXBIG_LED_MODE_NUM)
+ return -EINVAL;
+
+ for (i = 0; i < num_modes; i++) {
+ int mode;
+ int val;
+
+ of_property_read_u32_index(child,
+ "mode-val", 2 * i, &mode);
+ of_property_read_u32_index(child,
+ "mode-val", 2 * i + 1, &val);
+ if (mode >= NETXBIG_LED_MODE_NUM)
+ return -EINVAL;
+ mode_val[mode] = val;
+ }
+ led->mode_val = mode_val;
+
+ led++;
+ }
+
+ pdata->leds = leds;
+ pdata->num_leds = num_leds;
+
+ return 0;
+}
+
+static const struct of_device_id of_netxbig_leds_match[] = {
+ { .compatible = "lacie,netxbig-leds", },
+ {},
+};
+#else
+static int netxbig_leds_get_of_pdata(struct device *dev,
+ struct netxbig_led_platform_data *pdata)
+{
+ return -ENODEV;
+}
+#endif /* CONFIG_OF_GPIO */
+
static int netxbig_led_probe(struct platform_device *pdev)
{
struct netxbig_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
- struct netxbig_led_data *leds_data;
+ struct netxbig_led_priv *priv;
int i;
int ret;
- if (!pdata)
- return -EINVAL;
+ if (!pdata) {
+ pdata = devm_kzalloc(&pdev->dev,
+ sizeof(struct netxbig_led_platform_data),
+ GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+ ret = netxbig_leds_get_of_pdata(&pdev->dev, pdata);
+ if (ret)
+ return ret;
+ }
- leds_data = devm_kzalloc(&pdev->dev,
- sizeof(struct netxbig_led_data) * pdata->num_leds, GFP_KERNEL);
- if (!leds_data)
+ priv = devm_kzalloc(&pdev->dev,
+ sizeof(struct netxbig_led_priv) +
+ pdata->num_leds * sizeof(struct netxbig_led_data),
+ GFP_KERNEL);
+ if (!priv)
return -ENOMEM;
+ priv->pdata = pdata;
ret = gpio_ext_init(pdata->gpio_ext);
if (ret < 0)
return ret;
for (i = 0; i < pdata->num_leds; i++) {
- ret = create_netxbig_led(pdev, &leds_data[i], &pdata->leds[i]);
+ ret = create_netxbig_led(pdev, i, priv);
if (ret < 0)
goto err_free_leds;
}
-
- platform_set_drvdata(pdev, leds_data);
+ platform_set_drvdata(pdev, priv);
return 0;
err_free_leds:
for (i = i - 1; i >= 0; i--)
- delete_netxbig_led(&leds_data[i]);
+ delete_netxbig_led(&priv->leds_data[i]);
gpio_ext_free(pdata->gpio_ext);
return ret;
@@ -385,14 +594,12 @@ err_free_leds:
static int netxbig_led_remove(struct platform_device *pdev)
{
- struct netxbig_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
- struct netxbig_led_data *leds_data;
+ struct netxbig_led_priv *priv = platform_get_drvdata(pdev);
+ struct netxbig_led_platform_data *pdata = priv->pdata;
int i;
- leds_data = platform_get_drvdata(pdev);
-
for (i = 0; i < pdata->num_leds; i++)
- delete_netxbig_led(&leds_data[i]);
+ delete_netxbig_led(&priv->leds_data[i]);
gpio_ext_free(pdata->gpio_ext);
@@ -403,7 +610,8 @@ static struct platform_driver netxbig_led_driver = {
.probe = netxbig_led_probe,
.remove = netxbig_led_remove,
.driver = {
- .name = "leds-netxbig",
+ .name = "leds-netxbig",
+ .of_match_table = of_match_ptr(of_netxbig_leds_match),
},
};
diff --git a/include/dt-bindings/leds/leds-netxbig.h b/include/dt-bindings/leds/leds-netxbig.h
new file mode 100644
index 000000000000..92658b0310b2
--- /dev/null
+++ b/include/dt-bindings/leds/leds-netxbig.h
@@ -0,0 +1,18 @@
+/*
+ * This header provides constants for netxbig LED bindings.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _DT_BINDINGS_LEDS_NETXBIG_H
+#define _DT_BINDINGS_LEDS_NETXBIG_H
+
+#define NETXBIG_LED_OFF 0
+#define NETXBIG_LED_ON 1
+#define NETXBIG_LED_SATA 2
+#define NETXBIG_LED_TIMER1 3
+#define NETXBIG_LED_TIMER2 4
+
+#endif /* _DT_BINDINGS_LEDS_NETXBIG_H */
--
2.1.4
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v2 1/3] leds: netxbig: add device tree binding
@ 2015-06-18 11:52 ` Simon Guinot
0 siblings, 0 replies; 20+ messages in thread
From: Simon Guinot @ 2015-06-18 11:52 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds device tree support for the netxbig LEDs.
This also introduces a additionnal DT binding for the GPIO extension bus
(netxbig-gpio-ext) used to configure the LEDs. Since this bus could also
be used to control other devices, then it seems more suitable to have it
in a separate DT binding.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
---
Changes since v1:
- Check timer mode value retrieved from DT.
- In netxbig_leds_get_of_pdata, don't use unsigned long variables to get
timer delay values from DT with function of_property_read_u32_index.
Instead, use a temporary u32 variable. This allows to silence a static
checker warning.
- Make timer property optional in the binding documentation. It is now
aligned with the driver code.
.../devicetree/bindings/gpio/netxbig-gpio-ext.txt | 22 ++
.../devicetree/bindings/leds/leds-netxbig.txt | 92 ++++++++
drivers/leds/leds-netxbig.c | 250 +++++++++++++++++++--
include/dt-bindings/leds/leds-netxbig.h | 18 ++
4 files changed, 361 insertions(+), 21 deletions(-)
create mode 100644 Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
create mode 100644 Documentation/devicetree/bindings/leds/leds-netxbig.txt
create mode 100644 include/dt-bindings/leds/leds-netxbig.h
diff --git a/Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt b/Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
new file mode 100644
index 000000000000..e4fb2fe11086
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
@@ -0,0 +1,22 @@
+Binding for the GPIO extension bus found on some LaCie/Seagate boards
+(Example: 2Big/5Big Network v2, 2Big NAS).
+
+Required properties:
+- compatible: "lacie,netxbig-gpio-ext".
+- addr-gpios: GPIOs representing the address register.
+- data-gpios: GPIOs representing the data register.
+- enable-gpio: GPIO used to enable the new configuration (address, data).
+
+Example:
+
+netxbig_gpio_ext: netxbig-gpio-ext {
+ compatible = "lacie,netxbig-gpio-ext";
+
+ addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH
+ &gpio1 16 GPIO_ACTIVE_HIGH
+ &gpio1 17 GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH
+ &gpio1 13 GPIO_ACTIVE_HIGH
+ &gpio1 14 GPIO_ACTIVE_HIGH>;
+ enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-netxbig.txt b/Documentation/devicetree/bindings/leds/leds-netxbig.txt
new file mode 100644
index 000000000000..efadbecbfeb9
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-netxbig.txt
@@ -0,0 +1,92 @@
+Binding for the CPLD LEDs (GPIO extension bus) found on some LaCie/Seagate
+boards (Example: 2Big/5Big Network v2, 2Big NAS).
+
+Required properties:
+- compatible: "lacie,netxbig-leds".
+- gpio-ext: Phandle for the gpio-ext bus.
+
+Optional properties:
+- timers: Timer array. Each timer entry is represented by three integers:
+ Mode (gpio-ext bus), delay_on and delay_off.
+
+Each LED is represented as a sub-node of the netxbig-leds device.
+
+Required sub-node properties:
+- mode-addr: Mode register address on gpio-ext bus.
+- mode-val: Mode to value mapping. Each entry is represented by two integers:
+ A mode and the corresponding value on the gpio-ext bus.
+- bright-addr: Brightness register address on gpio-ext bus.
+- bright-max: Maximum brightness value.
+
+Optional sub-node properties:
+- label: Name for this LED. If omitted, the label is taken from the node name.
+- linux,default-trigger: Trigger assigned to the LED.
+
+Example:
+
+netxbig-leds {
+ compatible = "lacie,netxbig-leds";
+
+ gpio-ext = &gpio_ext;
+
+ timers = <NETXBIG_LED_TIMER1 500 500
+ NETXBIG_LED_TIMER2 500 1000>;
+
+ blue-power {
+ label = "netxbig:blue:power";
+ mode-addr = <0>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 1
+ NETXBIG_LED_TIMER1 3
+ NETXBIG_LED_TIMER2 7>;
+ bright-addr = <1>;
+ bright-max = <7>;
+ };
+ red-power {
+ label = "netxbig:red:power";
+ mode-addr = <0>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <1>;
+ bright-max = <7>;
+ };
+ blue-sata0 {
+ label = "netxbig:blue:sata0";
+ mode-addr = <3>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ red-sata0 {
+ label = "netxbig:red:sata0";
+ mode-addr = <3>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ blue-sata1 {
+ label = "netxbig:blue:sata1";
+ mode-addr = <4>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ red-sata1 {
+ label = "netxbig:red:sata1";
+ mode-addr = <4>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+};
diff --git a/drivers/leds/leds-netxbig.c b/drivers/leds/leds-netxbig.c
index 25e419752a7b..a0e3677348b3 100644
--- a/drivers/leds/leds-netxbig.c
+++ b/drivers/leds/leds-netxbig.c
@@ -26,6 +26,7 @@
#include <linux/spinlock.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/of_gpio.h>
#include <linux/leds.h>
#include <linux/platform_data/leds-kirkwood-netxbig.h>
@@ -140,6 +141,11 @@ struct netxbig_led_data {
spinlock_t lock;
};
+struct netxbig_led_priv {
+ struct netxbig_led_platform_data *pdata;
+ struct netxbig_led_data leds_data[];
+};
+
static int netxbig_led_get_timer_mode(enum netxbig_led_mode *mode,
unsigned long delay_on,
unsigned long delay_off,
@@ -304,12 +310,12 @@ static void delete_netxbig_led(struct netxbig_led_data *led_dat)
led_classdev_unregister(&led_dat->cdev);
}
-static int
-create_netxbig_led(struct platform_device *pdev,
- struct netxbig_led_data *led_dat,
- const struct netxbig_led *template)
+static int create_netxbig_led(struct platform_device *pdev, int led,
+ struct netxbig_led_priv *priv)
{
- struct netxbig_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct netxbig_led_platform_data *pdata = priv->pdata;
+ struct netxbig_led_data *led_dat = &priv->leds_data[led];
+ const struct netxbig_led *template = &priv->pdata->leds[led];
spin_lock_init(&led_dat->lock);
led_dat->gpio_ext = pdata->gpio_ext;
@@ -346,38 +352,241 @@ create_netxbig_led(struct platform_device *pdev,
return led_classdev_register(&pdev->dev, &led_dat->cdev);
}
+#ifdef CONFIG_OF_GPIO
+static int gpio_ext_get_of_pdata(struct device *dev, struct device_node *np,
+ struct netxbig_gpio_ext *gpio_ext)
+{
+ int *addr, *data;
+ int num_addr, num_data;
+ int ret;
+ int i;
+
+ ret = of_gpio_named_count(np, "addr-gpios");
+ if (ret < 0)
+ return ret;
+ num_addr = ret;
+ addr = devm_kzalloc(dev, num_addr * sizeof(unsigned int), GFP_KERNEL);
+ if (!addr)
+ return -ENOMEM;
+
+ for (i = 0; i < num_addr; i++) {
+ ret = of_get_named_gpio(np, "addr-gpios", i);
+ if (ret < 0)
+ return ret;
+ addr[i] = ret;
+ }
+ gpio_ext->addr = addr;
+ gpio_ext->num_addr = num_addr;
+
+ ret = of_gpio_named_count(np, "data-gpios");
+ if (ret < 0)
+ return ret;
+ num_data = ret;
+ data = devm_kzalloc(dev, num_data * sizeof(unsigned int), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ for (i = 0; i < num_data; i++) {
+ ret = of_get_named_gpio(np, "data-gpios", i);
+ if (ret < 0)
+ return ret;
+ data[i] = ret;
+ }
+ gpio_ext->data = data;
+ gpio_ext->num_data = num_data;
+
+ ret = of_get_named_gpio(np, "enable-gpio", 0);
+ if (ret < 0)
+ return ret;
+ gpio_ext->enable = ret;
+
+ return 0;
+}
+
+static int netxbig_leds_get_of_pdata(struct device *dev,
+ struct netxbig_led_platform_data *pdata)
+{
+ struct device_node *np = dev->of_node;
+ struct device_node *gpio_ext_np;
+ struct device_node *child;
+ struct netxbig_gpio_ext *gpio_ext;
+ struct netxbig_led_timer *timers;
+ struct netxbig_led *leds, *led;
+ int num_timers;
+ int num_leds = 0;
+ int ret;
+ int i;
+
+ /* GPIO extension */
+ gpio_ext_np = of_parse_phandle(np, "gpio-ext", 0);
+ if (!gpio_ext_np)
+ return -EINVAL;
+
+ gpio_ext = devm_kzalloc(dev, sizeof(struct netxbig_gpio_ext),
+ GFP_KERNEL);
+ if (!gpio_ext)
+ return -ENOMEM;
+ ret = gpio_ext_get_of_pdata(dev, gpio_ext_np, gpio_ext);
+ if (ret)
+ return ret;
+ of_node_put(gpio_ext_np);
+ pdata->gpio_ext = gpio_ext;
+
+ /* Timers (optional) */
+ ret = of_property_count_u32_elems(np, "timers");
+ if (ret > 0) {
+ if (ret % 3)
+ return -EINVAL;
+ num_timers = ret / 3;
+ timers = devm_kzalloc(dev,
+ num_timers * sizeof(struct netxbig_led_timer),
+ GFP_KERNEL);
+ if (!timers)
+ return -ENOMEM;
+ for (i = 0; i < num_timers; i++) {
+ u32 tmp;
+
+ of_property_read_u32_index(np, "timers", 3 * i,
+ &timers[i].mode);
+ if (timers[i].mode >= NETXBIG_LED_MODE_NUM)
+ return -EINVAL;
+ of_property_read_u32_index(np, "timers",
+ 3 * i + 1, tmp);
+ timers[i].delay_on = tmp;
+ of_property_read_u32_index(np, "timers",
+ 3 * i + 2, tmp);
+ timers[i].delay_off = tmp;
+ }
+ pdata->timer = timers;
+ pdata->num_timer = num_timers;
+ }
+
+ /* LEDs */
+ num_leds = of_get_child_count(np);
+ if (!num_leds)
+ return -ENODEV;
+
+ leds = devm_kzalloc(dev, num_leds * sizeof(struct netxbig_led),
+ GFP_KERNEL);
+ if (!leds)
+ return -ENOMEM;
+
+ led = leds;
+ for_each_child_of_node(np, child) {
+ const char *string;
+ int *mode_val;
+ int num_modes;
+
+ if (!of_property_read_string(child, "label", &string))
+ led->name = string;
+ else
+ led->name = child->name;
+
+ if (!of_property_read_string(child,
+ "linux,default-trigger", &string))
+ led->default_trigger = string;
+
+ if (of_property_read_u32(child, "mode-addr",
+ &led->mode_addr))
+ return -EINVAL;
+
+ if (of_property_read_u32(child, "bright-addr",
+ &led->bright_addr))
+ return -EINVAL;
+
+ mode_val = devm_kzalloc(dev,
+ NETXBIG_LED_MODE_NUM * sizeof(int),
+ GFP_KERNEL);
+ if (!mode_val)
+ return -ENOMEM;
+
+ for (i = 0; i < NETXBIG_LED_MODE_NUM; i++)
+ mode_val[i] = NETXBIG_LED_INVALID_MODE;
+
+ ret = of_property_count_u32_elems(child, "mode-val");
+ if (ret < 0 || ret % 2)
+ return -EINVAL;
+ num_modes = ret / 2;
+ if (num_modes > NETXBIG_LED_MODE_NUM)
+ return -EINVAL;
+
+ for (i = 0; i < num_modes; i++) {
+ int mode;
+ int val;
+
+ of_property_read_u32_index(child,
+ "mode-val", 2 * i, &mode);
+ of_property_read_u32_index(child,
+ "mode-val", 2 * i + 1, &val);
+ if (mode >= NETXBIG_LED_MODE_NUM)
+ return -EINVAL;
+ mode_val[mode] = val;
+ }
+ led->mode_val = mode_val;
+
+ led++;
+ }
+
+ pdata->leds = leds;
+ pdata->num_leds = num_leds;
+
+ return 0;
+}
+
+static const struct of_device_id of_netxbig_leds_match[] = {
+ { .compatible = "lacie,netxbig-leds", },
+ {},
+};
+#else
+static int netxbig_leds_get_of_pdata(struct device *dev,
+ struct netxbig_led_platform_data *pdata)
+{
+ return -ENODEV;
+}
+#endif /* CONFIG_OF_GPIO */
+
static int netxbig_led_probe(struct platform_device *pdev)
{
struct netxbig_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
- struct netxbig_led_data *leds_data;
+ struct netxbig_led_priv *priv;
int i;
int ret;
- if (!pdata)
- return -EINVAL;
+ if (!pdata) {
+ pdata = devm_kzalloc(&pdev->dev,
+ sizeof(struct netxbig_led_platform_data),
+ GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+ ret = netxbig_leds_get_of_pdata(&pdev->dev, pdata);
+ if (ret)
+ return ret;
+ }
- leds_data = devm_kzalloc(&pdev->dev,
- sizeof(struct netxbig_led_data) * pdata->num_leds, GFP_KERNEL);
- if (!leds_data)
+ priv = devm_kzalloc(&pdev->dev,
+ sizeof(struct netxbig_led_priv) +
+ pdata->num_leds * sizeof(struct netxbig_led_data),
+ GFP_KERNEL);
+ if (!priv)
return -ENOMEM;
+ priv->pdata = pdata;
ret = gpio_ext_init(pdata->gpio_ext);
if (ret < 0)
return ret;
for (i = 0; i < pdata->num_leds; i++) {
- ret = create_netxbig_led(pdev, &leds_data[i], &pdata->leds[i]);
+ ret = create_netxbig_led(pdev, i, priv);
if (ret < 0)
goto err_free_leds;
}
-
- platform_set_drvdata(pdev, leds_data);
+ platform_set_drvdata(pdev, priv);
return 0;
err_free_leds:
for (i = i - 1; i >= 0; i--)
- delete_netxbig_led(&leds_data[i]);
+ delete_netxbig_led(&priv->leds_data[i]);
gpio_ext_free(pdata->gpio_ext);
return ret;
@@ -385,14 +594,12 @@ err_free_leds:
static int netxbig_led_remove(struct platform_device *pdev)
{
- struct netxbig_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
- struct netxbig_led_data *leds_data;
+ struct netxbig_led_priv *priv = platform_get_drvdata(pdev);
+ struct netxbig_led_platform_data *pdata = priv->pdata;
int i;
- leds_data = platform_get_drvdata(pdev);
-
for (i = 0; i < pdata->num_leds; i++)
- delete_netxbig_led(&leds_data[i]);
+ delete_netxbig_led(&priv->leds_data[i]);
gpio_ext_free(pdata->gpio_ext);
@@ -403,7 +610,8 @@ static struct platform_driver netxbig_led_driver = {
.probe = netxbig_led_probe,
.remove = netxbig_led_remove,
.driver = {
- .name = "leds-netxbig",
+ .name = "leds-netxbig",
+ .of_match_table = of_match_ptr(of_netxbig_leds_match),
},
};
diff --git a/include/dt-bindings/leds/leds-netxbig.h b/include/dt-bindings/leds/leds-netxbig.h
new file mode 100644
index 000000000000..92658b0310b2
--- /dev/null
+++ b/include/dt-bindings/leds/leds-netxbig.h
@@ -0,0 +1,18 @@
+/*
+ * This header provides constants for netxbig LED bindings.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _DT_BINDINGS_LEDS_NETXBIG_H
+#define _DT_BINDINGS_LEDS_NETXBIG_H
+
+#define NETXBIG_LED_OFF 0
+#define NETXBIG_LED_ON 1
+#define NETXBIG_LED_SATA 2
+#define NETXBIG_LED_TIMER1 3
+#define NETXBIG_LED_TIMER2 4
+
+#endif /* _DT_BINDINGS_LEDS_NETXBIG_H */
--
2.1.4
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v2 2/3] ARM: Kirkwood: add LED DT entries for netxbig boards
2015-06-18 11:52 ` Simon Guinot
@ 2015-06-18 11:52 ` Simon Guinot
-1 siblings, 0 replies; 20+ messages in thread
From: Simon Guinot @ 2015-06-18 11:52 UTC (permalink / raw)
To: Bryan Wu, Richard Purdie, Jason Cooper, Andrew Lunn,
Gregory Clement, Sebastian Hesselbarth
Cc: Vincent Donnefort, Dan Carpenter, linux-arm-kernel, linux-leds,
Jacek Anaszewski
This patch adds DT entries for the LEDs found on the Kirkwood-based
LaCie boards 2Big and 5Big Network v2.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
---
arch/arm/boot/dts/kirkwood-net5big.dts | 60 +++++++++++++++++++++++++
arch/arm/boot/dts/kirkwood-netxbig.dtsi | 80 +++++++++++++++++++++++++++++++++
2 files changed, 140 insertions(+)
diff --git a/arch/arm/boot/dts/kirkwood-net5big.dts b/arch/arm/boot/dts/kirkwood-net5big.dts
index 36155b749d9f..3cc5e469df06 100644
--- a/arch/arm/boot/dts/kirkwood-net5big.dts
+++ b/arch/arm/boot/dts/kirkwood-net5big.dts
@@ -86,6 +86,66 @@
clock-frequency = <32768>;
};
};
+
+ netxbig-leds {
+ blue-sata2 {
+ label = "netxbig:blue:sata2";
+ mode-addr = <5>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ red-sata2 {
+ label = "netxbig:red:sata2";
+ mode-addr = <5>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ blue-sata3 {
+ label = "netxbig:blue:sata3";
+ mode-addr = <6>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ red-sata3 {
+ label = "netxbig:red:sata3";
+ mode-addr = <6>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ blue-sata4 {
+ label = "netxbig:blue:sata4";
+ mode-addr = <7>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ red-sata4 {
+ label = "netxbig:red:sata4";
+ mode-addr = <7>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ };
};
&mdio {
diff --git a/arch/arm/boot/dts/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/kirkwood-netxbig.dtsi
index b0cfb7cd30b9..5e7ed1c7e1b2 100644
--- a/arch/arm/boot/dts/kirkwood-netxbig.dtsi
+++ b/arch/arm/boot/dts/kirkwood-netxbig.dtsi
@@ -13,6 +13,7 @@
* warranty of any kind, whether express or implied.
*/
+#include <dt-bindings/leds/leds-netxbig.h>
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
@@ -105,6 +106,85 @@
gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
};
};
+
+ netxbig_gpio_ext: netxbig-gpio-ext {
+ compatible = "lacie,netxbig-gpio-ext";
+
+ addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH
+ &gpio1 16 GPIO_ACTIVE_HIGH
+ &gpio1 17 GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH
+ &gpio1 13 GPIO_ACTIVE_HIGH
+ &gpio1 14 GPIO_ACTIVE_HIGH>;
+ enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ };
+
+ netxbig-leds {
+ compatible = "lacie,netxbig-leds";
+
+ gpio-ext = <&netxbig_gpio_ext>;
+
+ timers = <NETXBIG_LED_TIMER1 500 500
+ NETXBIG_LED_TIMER2 500 1000>;
+
+ blue-power {
+ label = "netxbig:blue:power";
+ mode-addr = <0>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 1
+ NETXBIG_LED_TIMER1 3
+ NETXBIG_LED_TIMER2 7>;
+ bright-addr = <1>;
+ bright-max = <7>;
+ };
+ red-power {
+ label = "netxbig:red:power";
+ mode-addr = <0>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <1>;
+ bright-max = <7>;
+ };
+ blue-sata0 {
+ label = "netxbig:blue:sata0";
+ mode-addr = <3>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ red-sata0 {
+ label = "netxbig:red:sata0";
+ mode-addr = <3>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ blue-sata1 {
+ label = "netxbig:blue:sata1";
+ mode-addr = <4>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ red-sata1 {
+ label = "netxbig:red:sata1";
+ mode-addr = <4>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ };
};
&mdio {
--
2.1.4
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v2 2/3] ARM: Kirkwood: add LED DT entries for netxbig boards
@ 2015-06-18 11:52 ` Simon Guinot
0 siblings, 0 replies; 20+ messages in thread
From: Simon Guinot @ 2015-06-18 11:52 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds DT entries for the LEDs found on the Kirkwood-based
LaCie boards 2Big and 5Big Network v2.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
---
arch/arm/boot/dts/kirkwood-net5big.dts | 60 +++++++++++++++++++++++++
arch/arm/boot/dts/kirkwood-netxbig.dtsi | 80 +++++++++++++++++++++++++++++++++
2 files changed, 140 insertions(+)
diff --git a/arch/arm/boot/dts/kirkwood-net5big.dts b/arch/arm/boot/dts/kirkwood-net5big.dts
index 36155b749d9f..3cc5e469df06 100644
--- a/arch/arm/boot/dts/kirkwood-net5big.dts
+++ b/arch/arm/boot/dts/kirkwood-net5big.dts
@@ -86,6 +86,66 @@
clock-frequency = <32768>;
};
};
+
+ netxbig-leds {
+ blue-sata2 {
+ label = "netxbig:blue:sata2";
+ mode-addr = <5>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ red-sata2 {
+ label = "netxbig:red:sata2";
+ mode-addr = <5>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ blue-sata3 {
+ label = "netxbig:blue:sata3";
+ mode-addr = <6>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ red-sata3 {
+ label = "netxbig:red:sata3";
+ mode-addr = <6>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ blue-sata4 {
+ label = "netxbig:blue:sata4";
+ mode-addr = <7>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ red-sata4 {
+ label = "netxbig:red:sata4";
+ mode-addr = <7>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ };
};
&mdio {
diff --git a/arch/arm/boot/dts/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/kirkwood-netxbig.dtsi
index b0cfb7cd30b9..5e7ed1c7e1b2 100644
--- a/arch/arm/boot/dts/kirkwood-netxbig.dtsi
+++ b/arch/arm/boot/dts/kirkwood-netxbig.dtsi
@@ -13,6 +13,7 @@
* warranty of any kind, whether express or implied.
*/
+#include <dt-bindings/leds/leds-netxbig.h>
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
@@ -105,6 +106,85 @@
gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
};
};
+
+ netxbig_gpio_ext: netxbig-gpio-ext {
+ compatible = "lacie,netxbig-gpio-ext";
+
+ addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH
+ &gpio1 16 GPIO_ACTIVE_HIGH
+ &gpio1 17 GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH
+ &gpio1 13 GPIO_ACTIVE_HIGH
+ &gpio1 14 GPIO_ACTIVE_HIGH>;
+ enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ };
+
+ netxbig-leds {
+ compatible = "lacie,netxbig-leds";
+
+ gpio-ext = <&netxbig_gpio_ext>;
+
+ timers = <NETXBIG_LED_TIMER1 500 500
+ NETXBIG_LED_TIMER2 500 1000>;
+
+ blue-power {
+ label = "netxbig:blue:power";
+ mode-addr = <0>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 1
+ NETXBIG_LED_TIMER1 3
+ NETXBIG_LED_TIMER2 7>;
+ bright-addr = <1>;
+ bright-max = <7>;
+ };
+ red-power {
+ label = "netxbig:red:power";
+ mode-addr = <0>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <1>;
+ bright-max = <7>;
+ };
+ blue-sata0 {
+ label = "netxbig:blue:sata0";
+ mode-addr = <3>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ red-sata0 {
+ label = "netxbig:red:sata0";
+ mode-addr = <3>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ blue-sata1 {
+ label = "netxbig:blue:sata1";
+ mode-addr = <4>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ red-sata1 {
+ label = "netxbig:red:sata1";
+ mode-addr = <4>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ };
};
&mdio {
--
2.1.4
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v2 3/3] ARM: mvebu: remove static LED setup for netxbig boards
2015-06-18 11:52 ` Simon Guinot
@ 2015-06-18 11:52 ` Simon Guinot
-1 siblings, 0 replies; 20+ messages in thread
From: Simon Guinot @ 2015-06-18 11:52 UTC (permalink / raw)
To: Bryan Wu, Richard Purdie, Jason Cooper, Andrew Lunn,
Gregory Clement, Sebastian Hesselbarth
Cc: Vincent Donnefort, Dan Carpenter, linux-arm-kernel, linux-leds,
Jacek Anaszewski
Since DT support is now available for the LEDs found on the LaCie
netxbig boards (Kirkwood-based), then the old-fashion netxbig board
setup file is no longer needed. This patch removes this file.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
---
arch/arm/mach-mvebu/Kconfig | 7 --
arch/arm/mach-mvebu/Makefile | 1 -
arch/arm/mach-mvebu/board.h | 21 -----
arch/arm/mach-mvebu/kirkwood.c | 4 -
arch/arm/mach-mvebu/netxbig.c | 191 -----------------------------------------
5 files changed, 224 deletions(-)
delete mode 100644 arch/arm/mach-mvebu/board.h
delete mode 100644 arch/arm/mach-mvebu/netxbig.c
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index c1e4567a5ab3..e58020bc80c0 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -102,11 +102,4 @@ config MACH_KIRKWOOD
Say 'Y' here if you want your kernel to support boards based
on the Marvell Kirkwood device tree.
-config MACH_NETXBIG
- bool "LaCie 2Big and 5Big Network v2"
- depends on MACH_KIRKWOOD
- help
- Say 'Y' here if you want your kernel to support the
- LaCie 2Big and 5Big Network v2
-
endif
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index b4f01497ce0b..ecf9e0c3b107 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -13,4 +13,3 @@ endif
obj-$(CONFIG_MACH_DOVE) += dove.o
obj-$(CONFIG_MACH_KIRKWOOD) += kirkwood.o kirkwood-pm.o
-obj-$(CONFIG_MACH_NETXBIG) += netxbig.o
diff --git a/arch/arm/mach-mvebu/board.h b/arch/arm/mach-mvebu/board.h
deleted file mode 100644
index 98e32cc2ef3d..000000000000
--- a/arch/arm/mach-mvebu/board.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Board functions for Marvell System On Chip
- *
- * Copyright (C) 2014
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ARCH_MVEBU_BOARD_H
-#define __ARCH_MVEBU_BOARD_H
-
-#ifdef CONFIG_MACH_NETXBIG
-void netxbig_init(void);
-#else
-static inline void netxbig_init(void) {};
-#endif
-#endif
diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
index 6b5310828eb2..e81b33dc57d8 100644
--- a/arch/arm/mach-mvebu/kirkwood.c
+++ b/arch/arm/mach-mvebu/kirkwood.c
@@ -25,7 +25,6 @@
#include "kirkwood.h"
#include "kirkwood-pm.h"
#include "common.h"
-#include "board.h"
static struct resource kirkwood_cpufreq_resources[] = {
[0] = {
@@ -180,9 +179,6 @@ static void __init kirkwood_dt_init(void)
kirkwood_pm_init();
kirkwood_dt_eth_fixup();
- if (of_machine_is_compatible("lacie,netxbig"))
- netxbig_init();
-
of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL);
}
diff --git a/arch/arm/mach-mvebu/netxbig.c b/arch/arm/mach-mvebu/netxbig.c
deleted file mode 100644
index 94b11b6585a4..000000000000
--- a/arch/arm/mach-mvebu/netxbig.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * arch/arm/mach-mvbu/board-netxbig.c
- *
- * LaCie 2Big and 5Big Network v2 board setup
- *
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/leds-kirkwood-netxbig.h>
-#include "common.h"
-
-/*****************************************************************************
- * GPIO extension LEDs
- ****************************************************************************/
-
-/*
- * The LEDs are controlled by a CPLD and can be configured through a GPIO
- * extension bus:
- *
- * - address register : bit [0-2] -> GPIO [47-49]
- * - data register : bit [0-2] -> GPIO [44-46]
- * - enable register : GPIO 29
- */
-
-static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 };
-static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 };
-
-static struct netxbig_gpio_ext netxbig_v2_gpio_ext = {
- .addr = netxbig_v2_gpio_ext_addr,
- .num_addr = ARRAY_SIZE(netxbig_v2_gpio_ext_addr),
- .data = netxbig_v2_gpio_ext_data,
- .num_data = ARRAY_SIZE(netxbig_v2_gpio_ext_data),
- .enable = 29,
-};
-
-/*
- * Address register selection:
- *
- * addr | register
- * ----------------------------
- * 0 | front LED
- * 1 | front LED brightness
- * 2 | SATA LED brightness
- * 3 | SATA0 LED
- * 4 | SATA1 LED
- * 5 | SATA2 LED
- * 6 | SATA3 LED
- * 7 | SATA4 LED
- *
- * Data register configuration:
- *
- * data | LED brightness
- * -------------------------------------------------
- * 0 | min (off)
- * - | -
- * 7 | max
- *
- * data | front LED mode
- * -------------------------------------------------
- * 0 | fix off
- * 1 | fix blue on
- * 2 | fix red on
- * 3 | blink blue on=1 sec and blue off=1 sec
- * 4 | blink red on=1 sec and red off=1 sec
- * 5 | blink blue on=2.5 sec and red on=0.5 sec
- * 6 | blink blue on=1 sec and red on=1 sec
- * 7 | blink blue on=0.5 sec and blue off=2.5 sec
- *
- * data | SATA LED mode
- * -------------------------------------------------
- * 0 | fix off
- * 1 | SATA activity blink
- * 2 | fix red on
- * 3 | blink blue on=1 sec and blue off=1 sec
- * 4 | blink red on=1 sec and red off=1 sec
- * 5 | blink blue on=2.5 sec and red on=0.5 sec
- * 6 | blink blue on=1 sec and red on=1 sec
- * 7 | fix blue on
- */
-
-static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = {
- [NETXBIG_LED_OFF] = 0,
- [NETXBIG_LED_ON] = 2,
- [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE,
- [NETXBIG_LED_TIMER1] = 4,
- [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE,
-};
-
-static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = {
- [NETXBIG_LED_OFF] = 0,
- [NETXBIG_LED_ON] = 1,
- [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE,
- [NETXBIG_LED_TIMER1] = 3,
- [NETXBIG_LED_TIMER2] = 7,
-};
-
-static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = {
- [NETXBIG_LED_OFF] = 0,
- [NETXBIG_LED_ON] = 7,
- [NETXBIG_LED_SATA] = 1,
- [NETXBIG_LED_TIMER1] = 3,
- [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE,
-};
-
-static struct netxbig_led_timer netxbig_v2_led_timer[] = {
- [0] = {
- .delay_on = 500,
- .delay_off = 500,
- .mode = NETXBIG_LED_TIMER1,
- },
- [1] = {
- .delay_on = 500,
- .delay_off = 1000,
- .mode = NETXBIG_LED_TIMER2,
- },
-};
-
-#define NETXBIG_LED(_name, maddr, mval, baddr) \
- { .name = _name, \
- .mode_addr = maddr, \
- .mode_val = mval, \
- .bright_addr = baddr }
-
-static struct netxbig_led net2big_v2_leds_ctrl[] = {
- NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1),
- NETXBIG_LED("net2big-v2:red:power", 0, netxbig_v2_red_mled, 1),
- NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net2big-v2:red:sata0", 3, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net2big-v2:red:sata1", 4, netxbig_v2_red_mled, 2),
-};
-
-static struct netxbig_led_platform_data net2big_v2_leds_data = {
- .gpio_ext = &netxbig_v2_gpio_ext,
- .timer = netxbig_v2_led_timer,
- .num_timer = ARRAY_SIZE(netxbig_v2_led_timer),
- .leds = net2big_v2_leds_ctrl,
- .num_leds = ARRAY_SIZE(net2big_v2_leds_ctrl),
-};
-
-static struct netxbig_led net5big_v2_leds_ctrl[] = {
- NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1),
- NETXBIG_LED("net5big-v2:red:power", 0, netxbig_v2_red_mled, 1),
- NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata0", 3, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata1", 4, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata2", 5, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata3", 6, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata4", 7, netxbig_v2_red_mled, 2),
-};
-
-static struct netxbig_led_platform_data net5big_v2_leds_data = {
- .gpio_ext = &netxbig_v2_gpio_ext,
- .timer = netxbig_v2_led_timer,
- .num_timer = ARRAY_SIZE(netxbig_v2_led_timer),
- .leds = net5big_v2_leds_ctrl,
- .num_leds = ARRAY_SIZE(net5big_v2_leds_ctrl),
-};
-
-static struct platform_device netxbig_v2_leds = {
- .name = "leds-netxbig",
- .id = -1,
- .dev = {
- .platform_data = &net2big_v2_leds_data,
- },
-};
-
-void __init netxbig_init(void)
-{
-
- if (of_machine_is_compatible("lacie,net5big_v2"))
- netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data;
- platform_device_register(&netxbig_v2_leds);
-}
--
2.1.4
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v2 3/3] ARM: mvebu: remove static LED setup for netxbig boards
@ 2015-06-18 11:52 ` Simon Guinot
0 siblings, 0 replies; 20+ messages in thread
From: Simon Guinot @ 2015-06-18 11:52 UTC (permalink / raw)
To: linux-arm-kernel
Since DT support is now available for the LEDs found on the LaCie
netxbig boards (Kirkwood-based), then the old-fashion netxbig board
setup file is no longer needed. This patch removes this file.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
---
arch/arm/mach-mvebu/Kconfig | 7 --
arch/arm/mach-mvebu/Makefile | 1 -
arch/arm/mach-mvebu/board.h | 21 -----
arch/arm/mach-mvebu/kirkwood.c | 4 -
arch/arm/mach-mvebu/netxbig.c | 191 -----------------------------------------
5 files changed, 224 deletions(-)
delete mode 100644 arch/arm/mach-mvebu/board.h
delete mode 100644 arch/arm/mach-mvebu/netxbig.c
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index c1e4567a5ab3..e58020bc80c0 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -102,11 +102,4 @@ config MACH_KIRKWOOD
Say 'Y' here if you want your kernel to support boards based
on the Marvell Kirkwood device tree.
-config MACH_NETXBIG
- bool "LaCie 2Big and 5Big Network v2"
- depends on MACH_KIRKWOOD
- help
- Say 'Y' here if you want your kernel to support the
- LaCie 2Big and 5Big Network v2
-
endif
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index b4f01497ce0b..ecf9e0c3b107 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -13,4 +13,3 @@ endif
obj-$(CONFIG_MACH_DOVE) += dove.o
obj-$(CONFIG_MACH_KIRKWOOD) += kirkwood.o kirkwood-pm.o
-obj-$(CONFIG_MACH_NETXBIG) += netxbig.o
diff --git a/arch/arm/mach-mvebu/board.h b/arch/arm/mach-mvebu/board.h
deleted file mode 100644
index 98e32cc2ef3d..000000000000
--- a/arch/arm/mach-mvebu/board.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Board functions for Marvell System On Chip
- *
- * Copyright (C) 2014
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ARCH_MVEBU_BOARD_H
-#define __ARCH_MVEBU_BOARD_H
-
-#ifdef CONFIG_MACH_NETXBIG
-void netxbig_init(void);
-#else
-static inline void netxbig_init(void) {};
-#endif
-#endif
diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
index 6b5310828eb2..e81b33dc57d8 100644
--- a/arch/arm/mach-mvebu/kirkwood.c
+++ b/arch/arm/mach-mvebu/kirkwood.c
@@ -25,7 +25,6 @@
#include "kirkwood.h"
#include "kirkwood-pm.h"
#include "common.h"
-#include "board.h"
static struct resource kirkwood_cpufreq_resources[] = {
[0] = {
@@ -180,9 +179,6 @@ static void __init kirkwood_dt_init(void)
kirkwood_pm_init();
kirkwood_dt_eth_fixup();
- if (of_machine_is_compatible("lacie,netxbig"))
- netxbig_init();
-
of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL);
}
diff --git a/arch/arm/mach-mvebu/netxbig.c b/arch/arm/mach-mvebu/netxbig.c
deleted file mode 100644
index 94b11b6585a4..000000000000
--- a/arch/arm/mach-mvebu/netxbig.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * arch/arm/mach-mvbu/board-netxbig.c
- *
- * LaCie 2Big and 5Big Network v2 board setup
- *
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/leds-kirkwood-netxbig.h>
-#include "common.h"
-
-/*****************************************************************************
- * GPIO extension LEDs
- ****************************************************************************/
-
-/*
- * The LEDs are controlled by a CPLD and can be configured through a GPIO
- * extension bus:
- *
- * - address register : bit [0-2] -> GPIO [47-49]
- * - data register : bit [0-2] -> GPIO [44-46]
- * - enable register : GPIO 29
- */
-
-static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 };
-static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 };
-
-static struct netxbig_gpio_ext netxbig_v2_gpio_ext = {
- .addr = netxbig_v2_gpio_ext_addr,
- .num_addr = ARRAY_SIZE(netxbig_v2_gpio_ext_addr),
- .data = netxbig_v2_gpio_ext_data,
- .num_data = ARRAY_SIZE(netxbig_v2_gpio_ext_data),
- .enable = 29,
-};
-
-/*
- * Address register selection:
- *
- * addr | register
- * ----------------------------
- * 0 | front LED
- * 1 | front LED brightness
- * 2 | SATA LED brightness
- * 3 | SATA0 LED
- * 4 | SATA1 LED
- * 5 | SATA2 LED
- * 6 | SATA3 LED
- * 7 | SATA4 LED
- *
- * Data register configuration:
- *
- * data | LED brightness
- * -------------------------------------------------
- * 0 | min (off)
- * - | -
- * 7 | max
- *
- * data | front LED mode
- * -------------------------------------------------
- * 0 | fix off
- * 1 | fix blue on
- * 2 | fix red on
- * 3 | blink blue on=1 sec and blue off=1 sec
- * 4 | blink red on=1 sec and red off=1 sec
- * 5 | blink blue on=2.5 sec and red on=0.5 sec
- * 6 | blink blue on=1 sec and red on=1 sec
- * 7 | blink blue on=0.5 sec and blue off=2.5 sec
- *
- * data | SATA LED mode
- * -------------------------------------------------
- * 0 | fix off
- * 1 | SATA activity blink
- * 2 | fix red on
- * 3 | blink blue on=1 sec and blue off=1 sec
- * 4 | blink red on=1 sec and red off=1 sec
- * 5 | blink blue on=2.5 sec and red on=0.5 sec
- * 6 | blink blue on=1 sec and red on=1 sec
- * 7 | fix blue on
- */
-
-static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = {
- [NETXBIG_LED_OFF] = 0,
- [NETXBIG_LED_ON] = 2,
- [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE,
- [NETXBIG_LED_TIMER1] = 4,
- [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE,
-};
-
-static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = {
- [NETXBIG_LED_OFF] = 0,
- [NETXBIG_LED_ON] = 1,
- [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE,
- [NETXBIG_LED_TIMER1] = 3,
- [NETXBIG_LED_TIMER2] = 7,
-};
-
-static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = {
- [NETXBIG_LED_OFF] = 0,
- [NETXBIG_LED_ON] = 7,
- [NETXBIG_LED_SATA] = 1,
- [NETXBIG_LED_TIMER1] = 3,
- [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE,
-};
-
-static struct netxbig_led_timer netxbig_v2_led_timer[] = {
- [0] = {
- .delay_on = 500,
- .delay_off = 500,
- .mode = NETXBIG_LED_TIMER1,
- },
- [1] = {
- .delay_on = 500,
- .delay_off = 1000,
- .mode = NETXBIG_LED_TIMER2,
- },
-};
-
-#define NETXBIG_LED(_name, maddr, mval, baddr) \
- { .name = _name, \
- .mode_addr = maddr, \
- .mode_val = mval, \
- .bright_addr = baddr }
-
-static struct netxbig_led net2big_v2_leds_ctrl[] = {
- NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1),
- NETXBIG_LED("net2big-v2:red:power", 0, netxbig_v2_red_mled, 1),
- NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net2big-v2:red:sata0", 3, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net2big-v2:red:sata1", 4, netxbig_v2_red_mled, 2),
-};
-
-static struct netxbig_led_platform_data net2big_v2_leds_data = {
- .gpio_ext = &netxbig_v2_gpio_ext,
- .timer = netxbig_v2_led_timer,
- .num_timer = ARRAY_SIZE(netxbig_v2_led_timer),
- .leds = net2big_v2_leds_ctrl,
- .num_leds = ARRAY_SIZE(net2big_v2_leds_ctrl),
-};
-
-static struct netxbig_led net5big_v2_leds_ctrl[] = {
- NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1),
- NETXBIG_LED("net5big-v2:red:power", 0, netxbig_v2_red_mled, 1),
- NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata0", 3, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata1", 4, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata2", 5, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata3", 6, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata4", 7, netxbig_v2_red_mled, 2),
-};
-
-static struct netxbig_led_platform_data net5big_v2_leds_data = {
- .gpio_ext = &netxbig_v2_gpio_ext,
- .timer = netxbig_v2_led_timer,
- .num_timer = ARRAY_SIZE(netxbig_v2_led_timer),
- .leds = net5big_v2_leds_ctrl,
- .num_leds = ARRAY_SIZE(net5big_v2_leds_ctrl),
-};
-
-static struct platform_device netxbig_v2_leds = {
- .name = "leds-netxbig",
- .id = -1,
- .dev = {
- .platform_data = &net2big_v2_leds_data,
- },
-};
-
-void __init netxbig_init(void)
-{
-
- if (of_machine_is_compatible("lacie,net5big_v2"))
- netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data;
- platform_device_register(&netxbig_v2_leds);
-}
--
2.1.4
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [PATCH v2 2/3] ARM: Kirkwood: add LED DT entries for netxbig boards
2015-06-18 11:52 ` Simon Guinot
@ 2015-06-29 12:45 ` Gregory CLEMENT
-1 siblings, 0 replies; 20+ messages in thread
From: Gregory CLEMENT @ 2015-06-29 12:45 UTC (permalink / raw)
To: Simon Guinot
Cc: Bryan Wu, Richard Purdie, Jason Cooper, Andrew Lunn,
Sebastian Hesselbarth, linux-leds, linux-arm-kernel,
Dan Carpenter, Jacek Anaszewski, Vincent Donnefort
Hi Simon,
On 18/06/2015 13:52, Simon Guinot wrote:
> This patch adds DT entries for the LEDs found on the Kirkwood-based
> LaCie boards 2Big and 5Big Network v2.
>
> Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
> ---
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Thanks,
Gregory
> arch/arm/boot/dts/kirkwood-net5big.dts | 60 +++++++++++++++++++++++++
> arch/arm/boot/dts/kirkwood-netxbig.dtsi | 80 +++++++++++++++++++++++++++++++++
> 2 files changed, 140 insertions(+)
>
> diff --git a/arch/arm/boot/dts/kirkwood-net5big.dts b/arch/arm/boot/dts/kirkwood-net5big.dts
> index 36155b749d9f..3cc5e469df06 100644
> --- a/arch/arm/boot/dts/kirkwood-net5big.dts
> +++ b/arch/arm/boot/dts/kirkwood-net5big.dts
> @@ -86,6 +86,66 @@
> clock-frequency = <32768>;
> };
> };
> +
> + netxbig-leds {
> + blue-sata2 {
> + label = "netxbig:blue:sata2";
> + mode-addr = <5>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 7
> + NETXBIG_LED_SATA 1
> + NETXBIG_LED_TIMER1 3>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + red-sata2 {
> + label = "netxbig:red:sata2";
> + mode-addr = <5>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 2
> + NETXBIG_LED_TIMER1 4>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + blue-sata3 {
> + label = "netxbig:blue:sata3";
> + mode-addr = <6>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 7
> + NETXBIG_LED_SATA 1
> + NETXBIG_LED_TIMER1 3>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + red-sata3 {
> + label = "netxbig:red:sata3";
> + mode-addr = <6>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 2
> + NETXBIG_LED_TIMER1 4>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + blue-sata4 {
> + label = "netxbig:blue:sata4";
> + mode-addr = <7>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 7
> + NETXBIG_LED_SATA 1
> + NETXBIG_LED_TIMER1 3>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + red-sata4 {
> + label = "netxbig:red:sata4";
> + mode-addr = <7>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 2
> + NETXBIG_LED_TIMER1 4>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + };
> };
>
> &mdio {
> diff --git a/arch/arm/boot/dts/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/kirkwood-netxbig.dtsi
> index b0cfb7cd30b9..5e7ed1c7e1b2 100644
> --- a/arch/arm/boot/dts/kirkwood-netxbig.dtsi
> +++ b/arch/arm/boot/dts/kirkwood-netxbig.dtsi
> @@ -13,6 +13,7 @@
> * warranty of any kind, whether express or implied.
> */
>
> +#include <dt-bindings/leds/leds-netxbig.h>
> #include "kirkwood.dtsi"
> #include "kirkwood-6281.dtsi"
>
> @@ -105,6 +106,85 @@
> gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
> };
> };
> +
> + netxbig_gpio_ext: netxbig-gpio-ext {
> + compatible = "lacie,netxbig-gpio-ext";
> +
> + addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH
> + &gpio1 16 GPIO_ACTIVE_HIGH
> + &gpio1 17 GPIO_ACTIVE_HIGH>;
> + data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH
> + &gpio1 13 GPIO_ACTIVE_HIGH
> + &gpio1 14 GPIO_ACTIVE_HIGH>;
> + enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
> + };
> +
> + netxbig-leds {
> + compatible = "lacie,netxbig-leds";
> +
> + gpio-ext = <&netxbig_gpio_ext>;
> +
> + timers = <NETXBIG_LED_TIMER1 500 500
> + NETXBIG_LED_TIMER2 500 1000>;
> +
> + blue-power {
> + label = "netxbig:blue:power";
> + mode-addr = <0>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 1
> + NETXBIG_LED_TIMER1 3
> + NETXBIG_LED_TIMER2 7>;
> + bright-addr = <1>;
> + bright-max = <7>;
> + };
> + red-power {
> + label = "netxbig:red:power";
> + mode-addr = <0>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 2
> + NETXBIG_LED_TIMER1 4>;
> + bright-addr = <1>;
> + bright-max = <7>;
> + };
> + blue-sata0 {
> + label = "netxbig:blue:sata0";
> + mode-addr = <3>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 7
> + NETXBIG_LED_SATA 1
> + NETXBIG_LED_TIMER1 3>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + red-sata0 {
> + label = "netxbig:red:sata0";
> + mode-addr = <3>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 2
> + NETXBIG_LED_TIMER1 4>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + blue-sata1 {
> + label = "netxbig:blue:sata1";
> + mode-addr = <4>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 7
> + NETXBIG_LED_SATA 1
> + NETXBIG_LED_TIMER1 3>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + red-sata1 {
> + label = "netxbig:red:sata1";
> + mode-addr = <4>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 2
> + NETXBIG_LED_TIMER1 4>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + };
> };
>
> &mdio {
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v2 2/3] ARM: Kirkwood: add LED DT entries for netxbig boards
@ 2015-06-29 12:45 ` Gregory CLEMENT
0 siblings, 0 replies; 20+ messages in thread
From: Gregory CLEMENT @ 2015-06-29 12:45 UTC (permalink / raw)
To: linux-arm-kernel
Hi Simon,
On 18/06/2015 13:52, Simon Guinot wrote:
> This patch adds DT entries for the LEDs found on the Kirkwood-based
> LaCie boards 2Big and 5Big Network v2.
>
> Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
> ---
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Thanks,
Gregory
> arch/arm/boot/dts/kirkwood-net5big.dts | 60 +++++++++++++++++++++++++
> arch/arm/boot/dts/kirkwood-netxbig.dtsi | 80 +++++++++++++++++++++++++++++++++
> 2 files changed, 140 insertions(+)
>
> diff --git a/arch/arm/boot/dts/kirkwood-net5big.dts b/arch/arm/boot/dts/kirkwood-net5big.dts
> index 36155b749d9f..3cc5e469df06 100644
> --- a/arch/arm/boot/dts/kirkwood-net5big.dts
> +++ b/arch/arm/boot/dts/kirkwood-net5big.dts
> @@ -86,6 +86,66 @@
> clock-frequency = <32768>;
> };
> };
> +
> + netxbig-leds {
> + blue-sata2 {
> + label = "netxbig:blue:sata2";
> + mode-addr = <5>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 7
> + NETXBIG_LED_SATA 1
> + NETXBIG_LED_TIMER1 3>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + red-sata2 {
> + label = "netxbig:red:sata2";
> + mode-addr = <5>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 2
> + NETXBIG_LED_TIMER1 4>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + blue-sata3 {
> + label = "netxbig:blue:sata3";
> + mode-addr = <6>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 7
> + NETXBIG_LED_SATA 1
> + NETXBIG_LED_TIMER1 3>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + red-sata3 {
> + label = "netxbig:red:sata3";
> + mode-addr = <6>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 2
> + NETXBIG_LED_TIMER1 4>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + blue-sata4 {
> + label = "netxbig:blue:sata4";
> + mode-addr = <7>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 7
> + NETXBIG_LED_SATA 1
> + NETXBIG_LED_TIMER1 3>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + red-sata4 {
> + label = "netxbig:red:sata4";
> + mode-addr = <7>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 2
> + NETXBIG_LED_TIMER1 4>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + };
> };
>
> &mdio {
> diff --git a/arch/arm/boot/dts/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/kirkwood-netxbig.dtsi
> index b0cfb7cd30b9..5e7ed1c7e1b2 100644
> --- a/arch/arm/boot/dts/kirkwood-netxbig.dtsi
> +++ b/arch/arm/boot/dts/kirkwood-netxbig.dtsi
> @@ -13,6 +13,7 @@
> * warranty of any kind, whether express or implied.
> */
>
> +#include <dt-bindings/leds/leds-netxbig.h>
> #include "kirkwood.dtsi"
> #include "kirkwood-6281.dtsi"
>
> @@ -105,6 +106,85 @@
> gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
> };
> };
> +
> + netxbig_gpio_ext: netxbig-gpio-ext {
> + compatible = "lacie,netxbig-gpio-ext";
> +
> + addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH
> + &gpio1 16 GPIO_ACTIVE_HIGH
> + &gpio1 17 GPIO_ACTIVE_HIGH>;
> + data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH
> + &gpio1 13 GPIO_ACTIVE_HIGH
> + &gpio1 14 GPIO_ACTIVE_HIGH>;
> + enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
> + };
> +
> + netxbig-leds {
> + compatible = "lacie,netxbig-leds";
> +
> + gpio-ext = <&netxbig_gpio_ext>;
> +
> + timers = <NETXBIG_LED_TIMER1 500 500
> + NETXBIG_LED_TIMER2 500 1000>;
> +
> + blue-power {
> + label = "netxbig:blue:power";
> + mode-addr = <0>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 1
> + NETXBIG_LED_TIMER1 3
> + NETXBIG_LED_TIMER2 7>;
> + bright-addr = <1>;
> + bright-max = <7>;
> + };
> + red-power {
> + label = "netxbig:red:power";
> + mode-addr = <0>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 2
> + NETXBIG_LED_TIMER1 4>;
> + bright-addr = <1>;
> + bright-max = <7>;
> + };
> + blue-sata0 {
> + label = "netxbig:blue:sata0";
> + mode-addr = <3>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 7
> + NETXBIG_LED_SATA 1
> + NETXBIG_LED_TIMER1 3>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + red-sata0 {
> + label = "netxbig:red:sata0";
> + mode-addr = <3>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 2
> + NETXBIG_LED_TIMER1 4>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + blue-sata1 {
> + label = "netxbig:blue:sata1";
> + mode-addr = <4>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 7
> + NETXBIG_LED_SATA 1
> + NETXBIG_LED_TIMER1 3>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + red-sata1 {
> + label = "netxbig:red:sata1";
> + mode-addr = <4>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 2
> + NETXBIG_LED_TIMER1 4>;
> + bright-addr = <2>;
> + bright-max = <7>;
> + };
> + };
> };
>
> &mdio {
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v2 3/3] ARM: mvebu: remove static LED setup for netxbig boards
2015-06-18 11:52 ` Simon Guinot
@ 2015-06-29 12:45 ` Gregory CLEMENT
-1 siblings, 0 replies; 20+ messages in thread
From: Gregory CLEMENT @ 2015-06-29 12:45 UTC (permalink / raw)
To: Simon Guinot
Cc: Bryan Wu, Richard Purdie, Jason Cooper, Andrew Lunn,
Sebastian Hesselbarth, linux-leds, linux-arm-kernel,
Dan Carpenter, Jacek Anaszewski, Vincent Donnefort
Hi Simon,
On 18/06/2015 13:52, Simon Guinot wrote:
> Since DT support is now available for the LEDs found on the LaCie
> netxbig boards (Kirkwood-based), then the old-fashion netxbig board
> setup file is no longer needed. This patch removes this file.
>
> Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Thanks,
Gregory
> ---
> arch/arm/mach-mvebu/Kconfig | 7 --
> arch/arm/mach-mvebu/Makefile | 1 -
> arch/arm/mach-mvebu/board.h | 21 -----
> arch/arm/mach-mvebu/kirkwood.c | 4 -
> arch/arm/mach-mvebu/netxbig.c | 191 -----------------------------------------
> 5 files changed, 224 deletions(-)
> delete mode 100644 arch/arm/mach-mvebu/board.h
> delete mode 100644 arch/arm/mach-mvebu/netxbig.c
>
> diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
> index c1e4567a5ab3..e58020bc80c0 100644
> --- a/arch/arm/mach-mvebu/Kconfig
> +++ b/arch/arm/mach-mvebu/Kconfig
> @@ -102,11 +102,4 @@ config MACH_KIRKWOOD
> Say 'Y' here if you want your kernel to support boards based
> on the Marvell Kirkwood device tree.
>
> -config MACH_NETXBIG
> - bool "LaCie 2Big and 5Big Network v2"
> - depends on MACH_KIRKWOOD
> - help
> - Say 'Y' here if you want your kernel to support the
> - LaCie 2Big and 5Big Network v2
> -
> endif
> diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
> index b4f01497ce0b..ecf9e0c3b107 100644
> --- a/arch/arm/mach-mvebu/Makefile
> +++ b/arch/arm/mach-mvebu/Makefile
> @@ -13,4 +13,3 @@ endif
>
> obj-$(CONFIG_MACH_DOVE) += dove.o
> obj-$(CONFIG_MACH_KIRKWOOD) += kirkwood.o kirkwood-pm.o
> -obj-$(CONFIG_MACH_NETXBIG) += netxbig.o
> diff --git a/arch/arm/mach-mvebu/board.h b/arch/arm/mach-mvebu/board.h
> deleted file mode 100644
> index 98e32cc2ef3d..000000000000
> --- a/arch/arm/mach-mvebu/board.h
> +++ /dev/null
> @@ -1,21 +0,0 @@
> -/*
> - * Board functions for Marvell System On Chip
> - *
> - * Copyright (C) 2014
> - *
> - * Andrew Lunn <andrew@lunn.ch>
> - *
> - * This file is licensed under the terms of the GNU General Public
> - * License version 2. This program is licensed "as is" without any
> - * warranty of any kind, whether express or implied.
> - */
> -
> -#ifndef __ARCH_MVEBU_BOARD_H
> -#define __ARCH_MVEBU_BOARD_H
> -
> -#ifdef CONFIG_MACH_NETXBIG
> -void netxbig_init(void);
> -#else
> -static inline void netxbig_init(void) {};
> -#endif
> -#endif
> diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
> index 6b5310828eb2..e81b33dc57d8 100644
> --- a/arch/arm/mach-mvebu/kirkwood.c
> +++ b/arch/arm/mach-mvebu/kirkwood.c
> @@ -25,7 +25,6 @@
> #include "kirkwood.h"
> #include "kirkwood-pm.h"
> #include "common.h"
> -#include "board.h"
>
> static struct resource kirkwood_cpufreq_resources[] = {
> [0] = {
> @@ -180,9 +179,6 @@ static void __init kirkwood_dt_init(void)
> kirkwood_pm_init();
> kirkwood_dt_eth_fixup();
>
> - if (of_machine_is_compatible("lacie,netxbig"))
> - netxbig_init();
> -
> of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL);
> }
>
> diff --git a/arch/arm/mach-mvebu/netxbig.c b/arch/arm/mach-mvebu/netxbig.c
> deleted file mode 100644
> index 94b11b6585a4..000000000000
> --- a/arch/arm/mach-mvebu/netxbig.c
> +++ /dev/null
> @@ -1,191 +0,0 @@
> -/*
> - * arch/arm/mach-mvbu/board-netxbig.c
> - *
> - * LaCie 2Big and 5Big Network v2 board setup
> - *
> - * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - */
> -
> -#include <linux/kernel.h>
> -#include <linux/of.h>
> -#include <linux/platform_device.h>
> -#include <linux/platform_data/leds-kirkwood-netxbig.h>
> -#include "common.h"
> -
> -/*****************************************************************************
> - * GPIO extension LEDs
> - ****************************************************************************/
> -
> -/*
> - * The LEDs are controlled by a CPLD and can be configured through a GPIO
> - * extension bus:
> - *
> - * - address register : bit [0-2] -> GPIO [47-49]
> - * - data register : bit [0-2] -> GPIO [44-46]
> - * - enable register : GPIO 29
> - */
> -
> -static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 };
> -static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 };
> -
> -static struct netxbig_gpio_ext netxbig_v2_gpio_ext = {
> - .addr = netxbig_v2_gpio_ext_addr,
> - .num_addr = ARRAY_SIZE(netxbig_v2_gpio_ext_addr),
> - .data = netxbig_v2_gpio_ext_data,
> - .num_data = ARRAY_SIZE(netxbig_v2_gpio_ext_data),
> - .enable = 29,
> -};
> -
> -/*
> - * Address register selection:
> - *
> - * addr | register
> - * ----------------------------
> - * 0 | front LED
> - * 1 | front LED brightness
> - * 2 | SATA LED brightness
> - * 3 | SATA0 LED
> - * 4 | SATA1 LED
> - * 5 | SATA2 LED
> - * 6 | SATA3 LED
> - * 7 | SATA4 LED
> - *
> - * Data register configuration:
> - *
> - * data | LED brightness
> - * -------------------------------------------------
> - * 0 | min (off)
> - * - | -
> - * 7 | max
> - *
> - * data | front LED mode
> - * -------------------------------------------------
> - * 0 | fix off
> - * 1 | fix blue on
> - * 2 | fix red on
> - * 3 | blink blue on=1 sec and blue off=1 sec
> - * 4 | blink red on=1 sec and red off=1 sec
> - * 5 | blink blue on=2.5 sec and red on=0.5 sec
> - * 6 | blink blue on=1 sec and red on=1 sec
> - * 7 | blink blue on=0.5 sec and blue off=2.5 sec
> - *
> - * data | SATA LED mode
> - * -------------------------------------------------
> - * 0 | fix off
> - * 1 | SATA activity blink
> - * 2 | fix red on
> - * 3 | blink blue on=1 sec and blue off=1 sec
> - * 4 | blink red on=1 sec and red off=1 sec
> - * 5 | blink blue on=2.5 sec and red on=0.5 sec
> - * 6 | blink blue on=1 sec and red on=1 sec
> - * 7 | fix blue on
> - */
> -
> -static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = {
> - [NETXBIG_LED_OFF] = 0,
> - [NETXBIG_LED_ON] = 2,
> - [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE,
> - [NETXBIG_LED_TIMER1] = 4,
> - [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE,
> -};
> -
> -static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = {
> - [NETXBIG_LED_OFF] = 0,
> - [NETXBIG_LED_ON] = 1,
> - [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE,
> - [NETXBIG_LED_TIMER1] = 3,
> - [NETXBIG_LED_TIMER2] = 7,
> -};
> -
> -static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = {
> - [NETXBIG_LED_OFF] = 0,
> - [NETXBIG_LED_ON] = 7,
> - [NETXBIG_LED_SATA] = 1,
> - [NETXBIG_LED_TIMER1] = 3,
> - [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE,
> -};
> -
> -static struct netxbig_led_timer netxbig_v2_led_timer[] = {
> - [0] = {
> - .delay_on = 500,
> - .delay_off = 500,
> - .mode = NETXBIG_LED_TIMER1,
> - },
> - [1] = {
> - .delay_on = 500,
> - .delay_off = 1000,
> - .mode = NETXBIG_LED_TIMER2,
> - },
> -};
> -
> -#define NETXBIG_LED(_name, maddr, mval, baddr) \
> - { .name = _name, \
> - .mode_addr = maddr, \
> - .mode_val = mval, \
> - .bright_addr = baddr }
> -
> -static struct netxbig_led net2big_v2_leds_ctrl[] = {
> - NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1),
> - NETXBIG_LED("net2big-v2:red:power", 0, netxbig_v2_red_mled, 1),
> - NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
> - NETXBIG_LED("net2big-v2:red:sata0", 3, netxbig_v2_red_mled, 2),
> - NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
> - NETXBIG_LED("net2big-v2:red:sata1", 4, netxbig_v2_red_mled, 2),
> -};
> -
> -static struct netxbig_led_platform_data net2big_v2_leds_data = {
> - .gpio_ext = &netxbig_v2_gpio_ext,
> - .timer = netxbig_v2_led_timer,
> - .num_timer = ARRAY_SIZE(netxbig_v2_led_timer),
> - .leds = net2big_v2_leds_ctrl,
> - .num_leds = ARRAY_SIZE(net2big_v2_leds_ctrl),
> -};
> -
> -static struct netxbig_led net5big_v2_leds_ctrl[] = {
> - NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1),
> - NETXBIG_LED("net5big-v2:red:power", 0, netxbig_v2_red_mled, 1),
> - NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
> - NETXBIG_LED("net5big-v2:red:sata0", 3, netxbig_v2_red_mled, 2),
> - NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
> - NETXBIG_LED("net5big-v2:red:sata1", 4, netxbig_v2_red_mled, 2),
> - NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2),
> - NETXBIG_LED("net5big-v2:red:sata2", 5, netxbig_v2_red_mled, 2),
> - NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2),
> - NETXBIG_LED("net5big-v2:red:sata3", 6, netxbig_v2_red_mled, 2),
> - NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2),
> - NETXBIG_LED("net5big-v2:red:sata4", 7, netxbig_v2_red_mled, 2),
> -};
> -
> -static struct netxbig_led_platform_data net5big_v2_leds_data = {
> - .gpio_ext = &netxbig_v2_gpio_ext,
> - .timer = netxbig_v2_led_timer,
> - .num_timer = ARRAY_SIZE(netxbig_v2_led_timer),
> - .leds = net5big_v2_leds_ctrl,
> - .num_leds = ARRAY_SIZE(net5big_v2_leds_ctrl),
> -};
> -
> -static struct platform_device netxbig_v2_leds = {
> - .name = "leds-netxbig",
> - .id = -1,
> - .dev = {
> - .platform_data = &net2big_v2_leds_data,
> - },
> -};
> -
> -void __init netxbig_init(void)
> -{
> -
> - if (of_machine_is_compatible("lacie,net5big_v2"))
> - netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data;
> - platform_device_register(&netxbig_v2_leds);
> -}
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v2 3/3] ARM: mvebu: remove static LED setup for netxbig boards
@ 2015-06-29 12:45 ` Gregory CLEMENT
0 siblings, 0 replies; 20+ messages in thread
From: Gregory CLEMENT @ 2015-06-29 12:45 UTC (permalink / raw)
To: linux-arm-kernel
Hi Simon,
On 18/06/2015 13:52, Simon Guinot wrote:
> Since DT support is now available for the LEDs found on the LaCie
> netxbig boards (Kirkwood-based), then the old-fashion netxbig board
> setup file is no longer needed. This patch removes this file.
>
> Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Thanks,
Gregory
> ---
> arch/arm/mach-mvebu/Kconfig | 7 --
> arch/arm/mach-mvebu/Makefile | 1 -
> arch/arm/mach-mvebu/board.h | 21 -----
> arch/arm/mach-mvebu/kirkwood.c | 4 -
> arch/arm/mach-mvebu/netxbig.c | 191 -----------------------------------------
> 5 files changed, 224 deletions(-)
> delete mode 100644 arch/arm/mach-mvebu/board.h
> delete mode 100644 arch/arm/mach-mvebu/netxbig.c
>
> diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
> index c1e4567a5ab3..e58020bc80c0 100644
> --- a/arch/arm/mach-mvebu/Kconfig
> +++ b/arch/arm/mach-mvebu/Kconfig
> @@ -102,11 +102,4 @@ config MACH_KIRKWOOD
> Say 'Y' here if you want your kernel to support boards based
> on the Marvell Kirkwood device tree.
>
> -config MACH_NETXBIG
> - bool "LaCie 2Big and 5Big Network v2"
> - depends on MACH_KIRKWOOD
> - help
> - Say 'Y' here if you want your kernel to support the
> - LaCie 2Big and 5Big Network v2
> -
> endif
> diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
> index b4f01497ce0b..ecf9e0c3b107 100644
> --- a/arch/arm/mach-mvebu/Makefile
> +++ b/arch/arm/mach-mvebu/Makefile
> @@ -13,4 +13,3 @@ endif
>
> obj-$(CONFIG_MACH_DOVE) += dove.o
> obj-$(CONFIG_MACH_KIRKWOOD) += kirkwood.o kirkwood-pm.o
> -obj-$(CONFIG_MACH_NETXBIG) += netxbig.o
> diff --git a/arch/arm/mach-mvebu/board.h b/arch/arm/mach-mvebu/board.h
> deleted file mode 100644
> index 98e32cc2ef3d..000000000000
> --- a/arch/arm/mach-mvebu/board.h
> +++ /dev/null
> @@ -1,21 +0,0 @@
> -/*
> - * Board functions for Marvell System On Chip
> - *
> - * Copyright (C) 2014
> - *
> - * Andrew Lunn <andrew@lunn.ch>
> - *
> - * This file is licensed under the terms of the GNU General Public
> - * License version 2. This program is licensed "as is" without any
> - * warranty of any kind, whether express or implied.
> - */
> -
> -#ifndef __ARCH_MVEBU_BOARD_H
> -#define __ARCH_MVEBU_BOARD_H
> -
> -#ifdef CONFIG_MACH_NETXBIG
> -void netxbig_init(void);
> -#else
> -static inline void netxbig_init(void) {};
> -#endif
> -#endif
> diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
> index 6b5310828eb2..e81b33dc57d8 100644
> --- a/arch/arm/mach-mvebu/kirkwood.c
> +++ b/arch/arm/mach-mvebu/kirkwood.c
> @@ -25,7 +25,6 @@
> #include "kirkwood.h"
> #include "kirkwood-pm.h"
> #include "common.h"
> -#include "board.h"
>
> static struct resource kirkwood_cpufreq_resources[] = {
> [0] = {
> @@ -180,9 +179,6 @@ static void __init kirkwood_dt_init(void)
> kirkwood_pm_init();
> kirkwood_dt_eth_fixup();
>
> - if (of_machine_is_compatible("lacie,netxbig"))
> - netxbig_init();
> -
> of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL);
> }
>
> diff --git a/arch/arm/mach-mvebu/netxbig.c b/arch/arm/mach-mvebu/netxbig.c
> deleted file mode 100644
> index 94b11b6585a4..000000000000
> --- a/arch/arm/mach-mvebu/netxbig.c
> +++ /dev/null
> @@ -1,191 +0,0 @@
> -/*
> - * arch/arm/mach-mvbu/board-netxbig.c
> - *
> - * LaCie 2Big and 5Big Network v2 board setup
> - *
> - * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - */
> -
> -#include <linux/kernel.h>
> -#include <linux/of.h>
> -#include <linux/platform_device.h>
> -#include <linux/platform_data/leds-kirkwood-netxbig.h>
> -#include "common.h"
> -
> -/*****************************************************************************
> - * GPIO extension LEDs
> - ****************************************************************************/
> -
> -/*
> - * The LEDs are controlled by a CPLD and can be configured through a GPIO
> - * extension bus:
> - *
> - * - address register : bit [0-2] -> GPIO [47-49]
> - * - data register : bit [0-2] -> GPIO [44-46]
> - * - enable register : GPIO 29
> - */
> -
> -static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 };
> -static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 };
> -
> -static struct netxbig_gpio_ext netxbig_v2_gpio_ext = {
> - .addr = netxbig_v2_gpio_ext_addr,
> - .num_addr = ARRAY_SIZE(netxbig_v2_gpio_ext_addr),
> - .data = netxbig_v2_gpio_ext_data,
> - .num_data = ARRAY_SIZE(netxbig_v2_gpio_ext_data),
> - .enable = 29,
> -};
> -
> -/*
> - * Address register selection:
> - *
> - * addr | register
> - * ----------------------------
> - * 0 | front LED
> - * 1 | front LED brightness
> - * 2 | SATA LED brightness
> - * 3 | SATA0 LED
> - * 4 | SATA1 LED
> - * 5 | SATA2 LED
> - * 6 | SATA3 LED
> - * 7 | SATA4 LED
> - *
> - * Data register configuration:
> - *
> - * data | LED brightness
> - * -------------------------------------------------
> - * 0 | min (off)
> - * - | -
> - * 7 | max
> - *
> - * data | front LED mode
> - * -------------------------------------------------
> - * 0 | fix off
> - * 1 | fix blue on
> - * 2 | fix red on
> - * 3 | blink blue on=1 sec and blue off=1 sec
> - * 4 | blink red on=1 sec and red off=1 sec
> - * 5 | blink blue on=2.5 sec and red on=0.5 sec
> - * 6 | blink blue on=1 sec and red on=1 sec
> - * 7 | blink blue on=0.5 sec and blue off=2.5 sec
> - *
> - * data | SATA LED mode
> - * -------------------------------------------------
> - * 0 | fix off
> - * 1 | SATA activity blink
> - * 2 | fix red on
> - * 3 | blink blue on=1 sec and blue off=1 sec
> - * 4 | blink red on=1 sec and red off=1 sec
> - * 5 | blink blue on=2.5 sec and red on=0.5 sec
> - * 6 | blink blue on=1 sec and red on=1 sec
> - * 7 | fix blue on
> - */
> -
> -static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = {
> - [NETXBIG_LED_OFF] = 0,
> - [NETXBIG_LED_ON] = 2,
> - [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE,
> - [NETXBIG_LED_TIMER1] = 4,
> - [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE,
> -};
> -
> -static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = {
> - [NETXBIG_LED_OFF] = 0,
> - [NETXBIG_LED_ON] = 1,
> - [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE,
> - [NETXBIG_LED_TIMER1] = 3,
> - [NETXBIG_LED_TIMER2] = 7,
> -};
> -
> -static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = {
> - [NETXBIG_LED_OFF] = 0,
> - [NETXBIG_LED_ON] = 7,
> - [NETXBIG_LED_SATA] = 1,
> - [NETXBIG_LED_TIMER1] = 3,
> - [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE,
> -};
> -
> -static struct netxbig_led_timer netxbig_v2_led_timer[] = {
> - [0] = {
> - .delay_on = 500,
> - .delay_off = 500,
> - .mode = NETXBIG_LED_TIMER1,
> - },
> - [1] = {
> - .delay_on = 500,
> - .delay_off = 1000,
> - .mode = NETXBIG_LED_TIMER2,
> - },
> -};
> -
> -#define NETXBIG_LED(_name, maddr, mval, baddr) \
> - { .name = _name, \
> - .mode_addr = maddr, \
> - .mode_val = mval, \
> - .bright_addr = baddr }
> -
> -static struct netxbig_led net2big_v2_leds_ctrl[] = {
> - NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1),
> - NETXBIG_LED("net2big-v2:red:power", 0, netxbig_v2_red_mled, 1),
> - NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
> - NETXBIG_LED("net2big-v2:red:sata0", 3, netxbig_v2_red_mled, 2),
> - NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
> - NETXBIG_LED("net2big-v2:red:sata1", 4, netxbig_v2_red_mled, 2),
> -};
> -
> -static struct netxbig_led_platform_data net2big_v2_leds_data = {
> - .gpio_ext = &netxbig_v2_gpio_ext,
> - .timer = netxbig_v2_led_timer,
> - .num_timer = ARRAY_SIZE(netxbig_v2_led_timer),
> - .leds = net2big_v2_leds_ctrl,
> - .num_leds = ARRAY_SIZE(net2big_v2_leds_ctrl),
> -};
> -
> -static struct netxbig_led net5big_v2_leds_ctrl[] = {
> - NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1),
> - NETXBIG_LED("net5big-v2:red:power", 0, netxbig_v2_red_mled, 1),
> - NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
> - NETXBIG_LED("net5big-v2:red:sata0", 3, netxbig_v2_red_mled, 2),
> - NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
> - NETXBIG_LED("net5big-v2:red:sata1", 4, netxbig_v2_red_mled, 2),
> - NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2),
> - NETXBIG_LED("net5big-v2:red:sata2", 5, netxbig_v2_red_mled, 2),
> - NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2),
> - NETXBIG_LED("net5big-v2:red:sata3", 6, netxbig_v2_red_mled, 2),
> - NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2),
> - NETXBIG_LED("net5big-v2:red:sata4", 7, netxbig_v2_red_mled, 2),
> -};
> -
> -static struct netxbig_led_platform_data net5big_v2_leds_data = {
> - .gpio_ext = &netxbig_v2_gpio_ext,
> - .timer = netxbig_v2_led_timer,
> - .num_timer = ARRAY_SIZE(netxbig_v2_led_timer),
> - .leds = net5big_v2_leds_ctrl,
> - .num_leds = ARRAY_SIZE(net5big_v2_leds_ctrl),
> -};
> -
> -static struct platform_device netxbig_v2_leds = {
> - .name = "leds-netxbig",
> - .id = -1,
> - .dev = {
> - .platform_data = &net2big_v2_leds_data,
> - },
> -};
> -
> -void __init netxbig_init(void)
> -{
> -
> - if (of_machine_is_compatible("lacie,net5big_v2"))
> - netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data;
> - platform_device_register(&netxbig_v2_leds);
> -}
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v2 0/3] Add DT support for netxbig LEDs
2015-06-18 11:52 ` Simon Guinot
@ 2015-07-25 14:54 ` Gregory CLEMENT
-1 siblings, 0 replies; 20+ messages in thread
From: Gregory CLEMENT @ 2015-07-25 14:54 UTC (permalink / raw)
To: Simon Guinot, Bryan Wu, Richard Purdie
Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth, linux-leds,
linux-arm-kernel, Dan Carpenter, Jacek Anaszewski,
Vincent Donnefort
Hi Simon, Bryan, Richard,
On 18/06/2015 13:52, Simon Guinot wrote:
> Hello,
>
> This patch series adds DT support for the LEDs found on the Kirkwood-based
> LaCie boards 2Big and 5Big Network v2.
I saw that some led related patch on kirkwood based board have been merged.
What is the status of this series?
I still have the patch 2 and 3 in my inbox waiting for being applied.
Thanks,
Gregory
>
> Changes since v1:
> - Check timer mode value retrieved from DT.
> - In netxbig_leds_get_of_pdata, don't use unsigned long variables to get
> timer delay values from DT with function of_property_read_u32_index.
> Instead, use a temporary u32 variable. This allows to silence a static
> checker warning.
> - Make timer property optional in the binding documentation. It is now
> aligned with the driver code.
>
> Simon
>
> Simon Guinot (3):
> leds: netxbig: add device tree binding
> ARM: Kirkwood: add LED DT entries for netxbig boards
> ARM: mvebu: remove static LED setup for netxbig boards
>
> .../devicetree/bindings/gpio/netxbig-gpio-ext.txt | 22 ++
> .../devicetree/bindings/leds/leds-netxbig.txt | 92 ++++++++
> arch/arm/boot/dts/kirkwood-net5big.dts | 60 +++++
> arch/arm/boot/dts/kirkwood-netxbig.dtsi | 80 +++++++
> arch/arm/mach-mvebu/Kconfig | 7 -
> arch/arm/mach-mvebu/Makefile | 1 -
> arch/arm/mach-mvebu/board.h | 21 --
> arch/arm/mach-mvebu/kirkwood.c | 4 -
> arch/arm/mach-mvebu/netxbig.c | 191 ----------------
> drivers/leds/leds-netxbig.c | 250 +++++++++++++++++++--
> include/dt-bindings/leds/leds-netxbig.h | 18 ++
> 11 files changed, 501 insertions(+), 245 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
> create mode 100644 Documentation/devicetree/bindings/leds/leds-netxbig.txt
> delete mode 100644 arch/arm/mach-mvebu/board.h
> delete mode 100644 arch/arm/mach-mvebu/netxbig.c
> create mode 100644 include/dt-bindings/leds/leds-netxbig.h
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v2 0/3] Add DT support for netxbig LEDs
@ 2015-07-25 14:54 ` Gregory CLEMENT
0 siblings, 0 replies; 20+ messages in thread
From: Gregory CLEMENT @ 2015-07-25 14:54 UTC (permalink / raw)
To: linux-arm-kernel
Hi Simon, Bryan, Richard,
On 18/06/2015 13:52, Simon Guinot wrote:
> Hello,
>
> This patch series adds DT support for the LEDs found on the Kirkwood-based
> LaCie boards 2Big and 5Big Network v2.
I saw that some led related patch on kirkwood based board have been merged.
What is the status of this series?
I still have the patch 2 and 3 in my inbox waiting for being applied.
Thanks,
Gregory
>
> Changes since v1:
> - Check timer mode value retrieved from DT.
> - In netxbig_leds_get_of_pdata, don't use unsigned long variables to get
> timer delay values from DT with function of_property_read_u32_index.
> Instead, use a temporary u32 variable. This allows to silence a static
> checker warning.
> - Make timer property optional in the binding documentation. It is now
> aligned with the driver code.
>
> Simon
>
> Simon Guinot (3):
> leds: netxbig: add device tree binding
> ARM: Kirkwood: add LED DT entries for netxbig boards
> ARM: mvebu: remove static LED setup for netxbig boards
>
> .../devicetree/bindings/gpio/netxbig-gpio-ext.txt | 22 ++
> .../devicetree/bindings/leds/leds-netxbig.txt | 92 ++++++++
> arch/arm/boot/dts/kirkwood-net5big.dts | 60 +++++
> arch/arm/boot/dts/kirkwood-netxbig.dtsi | 80 +++++++
> arch/arm/mach-mvebu/Kconfig | 7 -
> arch/arm/mach-mvebu/Makefile | 1 -
> arch/arm/mach-mvebu/board.h | 21 --
> arch/arm/mach-mvebu/kirkwood.c | 4 -
> arch/arm/mach-mvebu/netxbig.c | 191 ----------------
> drivers/leds/leds-netxbig.c | 250 +++++++++++++++++++--
> include/dt-bindings/leds/leds-netxbig.h | 18 ++
> 11 files changed, 501 insertions(+), 245 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
> create mode 100644 Documentation/devicetree/bindings/leds/leds-netxbig.txt
> delete mode 100644 arch/arm/mach-mvebu/board.h
> delete mode 100644 arch/arm/mach-mvebu/netxbig.c
> create mode 100644 include/dt-bindings/leds/leds-netxbig.h
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v2 0/3] Add DT support for netxbig LEDs
2015-07-25 14:54 ` Gregory CLEMENT
@ 2015-07-25 19:36 ` Jacek Anaszewski
-1 siblings, 0 replies; 20+ messages in thread
From: Jacek Anaszewski @ 2015-07-25 19:36 UTC (permalink / raw)
To: Gregory CLEMENT, Simon Guinot, Bryan Wu, Richard Purdie
Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth, linux-leds,
linux-arm-kernel, Dan Carpenter, Jacek Anaszewski,
Vincent Donnefort
Hi Gregory,
On 25.07.2015 16:54, Gregory CLEMENT wrote:
> Hi Simon, Bryan, Richard,
>
> On 18/06/2015 13:52, Simon Guinot wrote:
>> Hello,
>>
>> This patch series adds DT support for the LEDs found on the Kirkwood-based
>> LaCie boards 2Big and 5Big Network v2.
>
> I saw that some led related patch on kirkwood based board have been merged.
> What is the status of this series?
LED subsystem part has been merged to linux-next, since DTS files
are not required for the compilation to succeed. We've been waiting
for ARM/Marvell Kirkwood maintainer opinion to decide on how to proceed
regarding patch 2/4.
> I still have the patch 2 and 3 in my inbox waiting for being applied.
Patch 3 affects only drivers/leds/leds-ns2.c, you were probably
thinking of patch 1 which modifies the out of LED tree file
include/linux/platform_data/leds-kirkwood-ns2.h.
IMO it would be best if the whole series went through the
LED tree.
> Thanks,
>
> Gregory
>
>
>>
>> Changes since v1:
>> - Check timer mode value retrieved from DT.
>> - In netxbig_leds_get_of_pdata, don't use unsigned long variables to get
>> timer delay values from DT with function of_property_read_u32_index.
>> Instead, use a temporary u32 variable. This allows to silence a static
>> checker warning.
>> - Make timer property optional in the binding documentation. It is now
>> aligned with the driver code.
>>
>> Simon
>>
>> Simon Guinot (3):
>> leds: netxbig: add device tree binding
>> ARM: Kirkwood: add LED DT entries for netxbig boards
>> ARM: mvebu: remove static LED setup for netxbig boards
>>
>> .../devicetree/bindings/gpio/netxbig-gpio-ext.txt | 22 ++
>> .../devicetree/bindings/leds/leds-netxbig.txt | 92 ++++++++
>> arch/arm/boot/dts/kirkwood-net5big.dts | 60 +++++
>> arch/arm/boot/dts/kirkwood-netxbig.dtsi | 80 +++++++
>> arch/arm/mach-mvebu/Kconfig | 7 -
>> arch/arm/mach-mvebu/Makefile | 1 -
>> arch/arm/mach-mvebu/board.h | 21 --
>> arch/arm/mach-mvebu/kirkwood.c | 4 -
>> arch/arm/mach-mvebu/netxbig.c | 191 ----------------
>> drivers/leds/leds-netxbig.c | 250 +++++++++++++++++++--
>> include/dt-bindings/leds/leds-netxbig.h | 18 ++
>> 11 files changed, 501 insertions(+), 245 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
>> create mode 100644 Documentation/devicetree/bindings/leds/leds-netxbig.txt
>> delete mode 100644 arch/arm/mach-mvebu/board.h
>> delete mode 100644 arch/arm/mach-mvebu/netxbig.c
>> create mode 100644 include/dt-bindings/leds/leds-netxbig.h
>>
>
>
--
Best Regards,
Jacek Anaszewski
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v2 0/3] Add DT support for netxbig LEDs
@ 2015-07-25 19:36 ` Jacek Anaszewski
0 siblings, 0 replies; 20+ messages in thread
From: Jacek Anaszewski @ 2015-07-25 19:36 UTC (permalink / raw)
To: linux-arm-kernel
Hi Gregory,
On 25.07.2015 16:54, Gregory CLEMENT wrote:
> Hi Simon, Bryan, Richard,
>
> On 18/06/2015 13:52, Simon Guinot wrote:
>> Hello,
>>
>> This patch series adds DT support for the LEDs found on the Kirkwood-based
>> LaCie boards 2Big and 5Big Network v2.
>
> I saw that some led related patch on kirkwood based board have been merged.
> What is the status of this series?
LED subsystem part has been merged to linux-next, since DTS files
are not required for the compilation to succeed. We've been waiting
for ARM/Marvell Kirkwood maintainer opinion to decide on how to proceed
regarding patch 2/4.
> I still have the patch 2 and 3 in my inbox waiting for being applied.
Patch 3 affects only drivers/leds/leds-ns2.c, you were probably
thinking of patch 1 which modifies the out of LED tree file
include/linux/platform_data/leds-kirkwood-ns2.h.
IMO it would be best if the whole series went through the
LED tree.
> Thanks,
>
> Gregory
>
>
>>
>> Changes since v1:
>> - Check timer mode value retrieved from DT.
>> - In netxbig_leds_get_of_pdata, don't use unsigned long variables to get
>> timer delay values from DT with function of_property_read_u32_index.
>> Instead, use a temporary u32 variable. This allows to silence a static
>> checker warning.
>> - Make timer property optional in the binding documentation. It is now
>> aligned with the driver code.
>>
>> Simon
>>
>> Simon Guinot (3):
>> leds: netxbig: add device tree binding
>> ARM: Kirkwood: add LED DT entries for netxbig boards
>> ARM: mvebu: remove static LED setup for netxbig boards
>>
>> .../devicetree/bindings/gpio/netxbig-gpio-ext.txt | 22 ++
>> .../devicetree/bindings/leds/leds-netxbig.txt | 92 ++++++++
>> arch/arm/boot/dts/kirkwood-net5big.dts | 60 +++++
>> arch/arm/boot/dts/kirkwood-netxbig.dtsi | 80 +++++++
>> arch/arm/mach-mvebu/Kconfig | 7 -
>> arch/arm/mach-mvebu/Makefile | 1 -
>> arch/arm/mach-mvebu/board.h | 21 --
>> arch/arm/mach-mvebu/kirkwood.c | 4 -
>> arch/arm/mach-mvebu/netxbig.c | 191 ----------------
>> drivers/leds/leds-netxbig.c | 250 +++++++++++++++++++--
>> include/dt-bindings/leds/leds-netxbig.h | 18 ++
>> 11 files changed, 501 insertions(+), 245 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
>> create mode 100644 Documentation/devicetree/bindings/leds/leds-netxbig.txt
>> delete mode 100644 arch/arm/mach-mvebu/board.h
>> delete mode 100644 arch/arm/mach-mvebu/netxbig.c
>> create mode 100644 include/dt-bindings/leds/leds-netxbig.h
>>
>
>
--
Best Regards,
Jacek Anaszewski
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v2 0/3] Add DT support for netxbig LEDs
2015-07-25 19:36 ` Jacek Anaszewski
@ 2015-07-25 20:45 ` Jacek Anaszewski
-1 siblings, 0 replies; 20+ messages in thread
From: Jacek Anaszewski @ 2015-07-25 20:45 UTC (permalink / raw)
To: Gregory CLEMENT, Simon Guinot, Bryan Wu, Richard Purdie
Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth, linux-leds,
linux-arm-kernel, Dan Carpenter, Jacek Anaszewski,
Vincent Donnefort
I confused two patch sets. Everything I wrote in the reply
below was related to leds-ns2 [1] patch set.
When it is related to leds-netxbig driver - there was already
version 3 posted [2], but it is not the final one, we are waiting
for the update.
On 25.07.2015 21:36, Jacek Anaszewski wrote:
> Hi Gregory,
>
> On 25.07.2015 16:54, Gregory CLEMENT wrote:
>> Hi Simon, Bryan, Richard,
>>
>> On 18/06/2015 13:52, Simon Guinot wrote:
>>> Hello,
>>>
>>> This patch series adds DT support for the LEDs found on the
>>> Kirkwood-based
>>> LaCie boards 2Big and 5Big Network v2.
>>
>> I saw that some led related patch on kirkwood based board have been
>> merged.
>> What is the status of this series?
>
> LED subsystem part has been merged to linux-next, since DTS files
> are not required for the compilation to succeed. We've been waiting
> for ARM/Marvell Kirkwood maintainer opinion to decide on how to proceed
> regarding patch 2/4.
>
>> I still have the patch 2 and 3 in my inbox waiting for being applied.
>
> Patch 3 affects only drivers/leds/leds-ns2.c, you were probably
> thinking of patch 1 which modifies the out of LED tree file
> include/linux/platform_data/leds-kirkwood-ns2.h.
>
> IMO it would be best if the whole series went through the
> LED tree.
>
>> Thanks,
>>
>> Gregory
>>
>>
>>>
>>> Changes since v1:
>>> - Check timer mode value retrieved from DT.
>>> - In netxbig_leds_get_of_pdata, don't use unsigned long variables to get
>>> timer delay values from DT with function of_property_read_u32_index.
>>> Instead, use a temporary u32 variable. This allows to silence a
>>> static
>>> checker warning.
>>> - Make timer property optional in the binding documentation. It is now
>>> aligned with the driver code.
>>>
>>> Simon
>>>
>>> Simon Guinot (3):
>>> leds: netxbig: add device tree binding
>>> ARM: Kirkwood: add LED DT entries for netxbig boards
>>> ARM: mvebu: remove static LED setup for netxbig boards
>>>
>>> .../devicetree/bindings/gpio/netxbig-gpio-ext.txt | 22 ++
>>> .../devicetree/bindings/leds/leds-netxbig.txt | 92 ++++++++
>>> arch/arm/boot/dts/kirkwood-net5big.dts | 60 +++++
>>> arch/arm/boot/dts/kirkwood-netxbig.dtsi | 80 +++++++
>>> arch/arm/mach-mvebu/Kconfig | 7 -
>>> arch/arm/mach-mvebu/Makefile | 1 -
>>> arch/arm/mach-mvebu/board.h | 21 --
>>> arch/arm/mach-mvebu/kirkwood.c | 4 -
>>> arch/arm/mach-mvebu/netxbig.c | 191
>>> ----------------
>>> drivers/leds/leds-netxbig.c | 250
>>> +++++++++++++++++++--
>>> include/dt-bindings/leds/leds-netxbig.h | 18 ++
>>> 11 files changed, 501 insertions(+), 245 deletions(-)
>>> create mode 100644
>>> Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
>>> create mode 100644
>>> Documentation/devicetree/bindings/leds/leds-netxbig.txt
>>> delete mode 100644 arch/arm/mach-mvebu/board.h
>>> delete mode 100644 arch/arm/mach-mvebu/netxbig.c
>>> create mode 100644 include/dt-bindings/leds/leds-netxbig.h
>>>
>>
>>
>
[1]
http://lists.infradead.org/pipermail/linux-arm-kernel/2015-July/353807.html
[2]
http://lists.infradead.org/pipermail/linux-arm-kernel/2015-June/351486.html
--
Best Regards,
Jacek Anaszewski
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v2 0/3] Add DT support for netxbig LEDs
@ 2015-07-25 20:45 ` Jacek Anaszewski
0 siblings, 0 replies; 20+ messages in thread
From: Jacek Anaszewski @ 2015-07-25 20:45 UTC (permalink / raw)
To: linux-arm-kernel
I confused two patch sets. Everything I wrote in the reply
below was related to leds-ns2 [1] patch set.
When it is related to leds-netxbig driver - there was already
version 3 posted [2], but it is not the final one, we are waiting
for the update.
On 25.07.2015 21:36, Jacek Anaszewski wrote:
> Hi Gregory,
>
> On 25.07.2015 16:54, Gregory CLEMENT wrote:
>> Hi Simon, Bryan, Richard,
>>
>> On 18/06/2015 13:52, Simon Guinot wrote:
>>> Hello,
>>>
>>> This patch series adds DT support for the LEDs found on the
>>> Kirkwood-based
>>> LaCie boards 2Big and 5Big Network v2.
>>
>> I saw that some led related patch on kirkwood based board have been
>> merged.
>> What is the status of this series?
>
> LED subsystem part has been merged to linux-next, since DTS files
> are not required for the compilation to succeed. We've been waiting
> for ARM/Marvell Kirkwood maintainer opinion to decide on how to proceed
> regarding patch 2/4.
>
>> I still have the patch 2 and 3 in my inbox waiting for being applied.
>
> Patch 3 affects only drivers/leds/leds-ns2.c, you were probably
> thinking of patch 1 which modifies the out of LED tree file
> include/linux/platform_data/leds-kirkwood-ns2.h.
>
> IMO it would be best if the whole series went through the
> LED tree.
>
>> Thanks,
>>
>> Gregory
>>
>>
>>>
>>> Changes since v1:
>>> - Check timer mode value retrieved from DT.
>>> - In netxbig_leds_get_of_pdata, don't use unsigned long variables to get
>>> timer delay values from DT with function of_property_read_u32_index.
>>> Instead, use a temporary u32 variable. This allows to silence a
>>> static
>>> checker warning.
>>> - Make timer property optional in the binding documentation. It is now
>>> aligned with the driver code.
>>>
>>> Simon
>>>
>>> Simon Guinot (3):
>>> leds: netxbig: add device tree binding
>>> ARM: Kirkwood: add LED DT entries for netxbig boards
>>> ARM: mvebu: remove static LED setup for netxbig boards
>>>
>>> .../devicetree/bindings/gpio/netxbig-gpio-ext.txt | 22 ++
>>> .../devicetree/bindings/leds/leds-netxbig.txt | 92 ++++++++
>>> arch/arm/boot/dts/kirkwood-net5big.dts | 60 +++++
>>> arch/arm/boot/dts/kirkwood-netxbig.dtsi | 80 +++++++
>>> arch/arm/mach-mvebu/Kconfig | 7 -
>>> arch/arm/mach-mvebu/Makefile | 1 -
>>> arch/arm/mach-mvebu/board.h | 21 --
>>> arch/arm/mach-mvebu/kirkwood.c | 4 -
>>> arch/arm/mach-mvebu/netxbig.c | 191
>>> ----------------
>>> drivers/leds/leds-netxbig.c | 250
>>> +++++++++++++++++++--
>>> include/dt-bindings/leds/leds-netxbig.h | 18 ++
>>> 11 files changed, 501 insertions(+), 245 deletions(-)
>>> create mode 100644
>>> Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
>>> create mode 100644
>>> Documentation/devicetree/bindings/leds/leds-netxbig.txt
>>> delete mode 100644 arch/arm/mach-mvebu/board.h
>>> delete mode 100644 arch/arm/mach-mvebu/netxbig.c
>>> create mode 100644 include/dt-bindings/leds/leds-netxbig.h
>>>
>>
>>
>
[1]
http://lists.infradead.org/pipermail/linux-arm-kernel/2015-July/353807.html
[2]
http://lists.infradead.org/pipermail/linux-arm-kernel/2015-June/351486.html
--
Best Regards,
Jacek Anaszewski
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v2 0/3] Add DT support for netxbig LEDs
2015-07-25 20:45 ` Jacek Anaszewski
@ 2015-07-28 10:30 ` Gregory CLEMENT
-1 siblings, 0 replies; 20+ messages in thread
From: Gregory CLEMENT @ 2015-07-28 10:30 UTC (permalink / raw)
To: Jacek Anaszewski, Simon Guinot
Cc: Bryan Wu, Richard Purdie, Jason Cooper, Andrew Lunn,
Sebastian Hesselbarth, linux-leds, linux-arm-kernel,
Dan Carpenter, Jacek Anaszewski, Vincent Donnefort
Hi Jacek, Simon,
On 25/07/2015 22:45, Jacek Anaszewski wrote:
> I confused two patch sets. Everything I wrote in the reply
> below was related to leds-ns2 [1] patch set.
About taking the dts part of this patch set in the led branch, I agree.
It will solve the dependency problem I would have. Usually we (the mvebu
maintainer) take all the dts related to void the merge conflict.
For these ones, I don't expect any merge problem because they are all located
in dts and only in one family.
So you can also take "[PATCH v2 2/4] ARM: Kirkwood: add modes-map property to
ns2-leds nodes" with my
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
and I will remove this one from my branches.
Thanks,
Gregory
> When it is related to leds-netxbig driver - there was already
> version 3 posted [2], but it is not the final one, we are waiting
> for the update.
Right, I missed this third version.
>
> On 25.07.2015 21:36, Jacek Anaszewski wrote:
>> Hi Gregory,
>>
>> On 25.07.2015 16:54, Gregory CLEMENT wrote:
>>> Hi Simon, Bryan, Richard,
>>>
>>> On 18/06/2015 13:52, Simon Guinot wrote:
>>>> Hello,
>>>>
>>>> This patch series adds DT support for the LEDs found on the
>>>> Kirkwood-based
>>>> LaCie boards 2Big and 5Big Network v2.
>>>
>>> I saw that some led related patch on kirkwood based board have been
>>> merged.
>>> What is the status of this series?
>>
>> LED subsystem part has been merged to linux-next, since DTS files
>> are not required for the compilation to succeed. We've been waiting
>> for ARM/Marvell Kirkwood maintainer opinion to decide on how to proceed
>> regarding patch 2/4.
>>
>>> I still have the patch 2 and 3 in my inbox waiting for being applied.
>>
>> Patch 3 affects only drivers/leds/leds-ns2.c, you were probably
>> thinking of patch 1 which modifies the out of LED tree file
>> include/linux/platform_data/leds-kirkwood-ns2.h.
>>
>> IMO it would be best if the whole series went through the
>> LED tree.
>>
>>> Thanks,
>>>
>>> Gregory
>>>
>>>
>>>>
>>>> Changes since v1:
>>>> - Check timer mode value retrieved from DT.
>>>> - In netxbig_leds_get_of_pdata, don't use unsigned long variables to get
>>>> timer delay values from DT with function of_property_read_u32_index.
>>>> Instead, use a temporary u32 variable. This allows to silence a
>>>> static
>>>> checker warning.
>>>> - Make timer property optional in the binding documentation. It is now
>>>> aligned with the driver code.
>>>>
>>>> Simon
>>>>
>>>> Simon Guinot (3):
>>>> leds: netxbig: add device tree binding
>>>> ARM: Kirkwood: add LED DT entries for netxbig boards
>>>> ARM: mvebu: remove static LED setup for netxbig boards
>>>>
>>>> .../devicetree/bindings/gpio/netxbig-gpio-ext.txt | 22 ++
>>>> .../devicetree/bindings/leds/leds-netxbig.txt | 92 ++++++++
>>>> arch/arm/boot/dts/kirkwood-net5big.dts | 60 +++++
>>>> arch/arm/boot/dts/kirkwood-netxbig.dtsi | 80 +++++++
>>>> arch/arm/mach-mvebu/Kconfig | 7 -
>>>> arch/arm/mach-mvebu/Makefile | 1 -
>>>> arch/arm/mach-mvebu/board.h | 21 --
>>>> arch/arm/mach-mvebu/kirkwood.c | 4 -
>>>> arch/arm/mach-mvebu/netxbig.c | 191
>>>> ----------------
>>>> drivers/leds/leds-netxbig.c | 250
>>>> +++++++++++++++++++--
>>>> include/dt-bindings/leds/leds-netxbig.h | 18 ++
>>>> 11 files changed, 501 insertions(+), 245 deletions(-)
>>>> create mode 100644
>>>> Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
>>>> create mode 100644
>>>> Documentation/devicetree/bindings/leds/leds-netxbig.txt
>>>> delete mode 100644 arch/arm/mach-mvebu/board.h
>>>> delete mode 100644 arch/arm/mach-mvebu/netxbig.c
>>>> create mode 100644 include/dt-bindings/leds/leds-netxbig.h
>>>>
>>>
>>>
>>
>
> [1]
> http://lists.infradead.org/pipermail/linux-arm-kernel/2015-July/353807.html
> [2]
> http://lists.infradead.org/pipermail/linux-arm-kernel/2015-June/351486.html
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v2 0/3] Add DT support for netxbig LEDs
@ 2015-07-28 10:30 ` Gregory CLEMENT
0 siblings, 0 replies; 20+ messages in thread
From: Gregory CLEMENT @ 2015-07-28 10:30 UTC (permalink / raw)
To: linux-arm-kernel
Hi Jacek, Simon,
On 25/07/2015 22:45, Jacek Anaszewski wrote:
> I confused two patch sets. Everything I wrote in the reply
> below was related to leds-ns2 [1] patch set.
About taking the dts part of this patch set in the led branch, I agree.
It will solve the dependency problem I would have. Usually we (the mvebu
maintainer) take all the dts related to void the merge conflict.
For these ones, I don't expect any merge problem because they are all located
in dts and only in one family.
So you can also take "[PATCH v2 2/4] ARM: Kirkwood: add modes-map property to
ns2-leds nodes" with my
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
and I will remove this one from my branches.
Thanks,
Gregory
> When it is related to leds-netxbig driver - there was already
> version 3 posted [2], but it is not the final one, we are waiting
> for the update.
Right, I missed this third version.
>
> On 25.07.2015 21:36, Jacek Anaszewski wrote:
>> Hi Gregory,
>>
>> On 25.07.2015 16:54, Gregory CLEMENT wrote:
>>> Hi Simon, Bryan, Richard,
>>>
>>> On 18/06/2015 13:52, Simon Guinot wrote:
>>>> Hello,
>>>>
>>>> This patch series adds DT support for the LEDs found on the
>>>> Kirkwood-based
>>>> LaCie boards 2Big and 5Big Network v2.
>>>
>>> I saw that some led related patch on kirkwood based board have been
>>> merged.
>>> What is the status of this series?
>>
>> LED subsystem part has been merged to linux-next, since DTS files
>> are not required for the compilation to succeed. We've been waiting
>> for ARM/Marvell Kirkwood maintainer opinion to decide on how to proceed
>> regarding patch 2/4.
>>
>>> I still have the patch 2 and 3 in my inbox waiting for being applied.
>>
>> Patch 3 affects only drivers/leds/leds-ns2.c, you were probably
>> thinking of patch 1 which modifies the out of LED tree file
>> include/linux/platform_data/leds-kirkwood-ns2.h.
>>
>> IMO it would be best if the whole series went through the
>> LED tree.
>>
>>> Thanks,
>>>
>>> Gregory
>>>
>>>
>>>>
>>>> Changes since v1:
>>>> - Check timer mode value retrieved from DT.
>>>> - In netxbig_leds_get_of_pdata, don't use unsigned long variables to get
>>>> timer delay values from DT with function of_property_read_u32_index.
>>>> Instead, use a temporary u32 variable. This allows to silence a
>>>> static
>>>> checker warning.
>>>> - Make timer property optional in the binding documentation. It is now
>>>> aligned with the driver code.
>>>>
>>>> Simon
>>>>
>>>> Simon Guinot (3):
>>>> leds: netxbig: add device tree binding
>>>> ARM: Kirkwood: add LED DT entries for netxbig boards
>>>> ARM: mvebu: remove static LED setup for netxbig boards
>>>>
>>>> .../devicetree/bindings/gpio/netxbig-gpio-ext.txt | 22 ++
>>>> .../devicetree/bindings/leds/leds-netxbig.txt | 92 ++++++++
>>>> arch/arm/boot/dts/kirkwood-net5big.dts | 60 +++++
>>>> arch/arm/boot/dts/kirkwood-netxbig.dtsi | 80 +++++++
>>>> arch/arm/mach-mvebu/Kconfig | 7 -
>>>> arch/arm/mach-mvebu/Makefile | 1 -
>>>> arch/arm/mach-mvebu/board.h | 21 --
>>>> arch/arm/mach-mvebu/kirkwood.c | 4 -
>>>> arch/arm/mach-mvebu/netxbig.c | 191
>>>> ----------------
>>>> drivers/leds/leds-netxbig.c | 250
>>>> +++++++++++++++++++--
>>>> include/dt-bindings/leds/leds-netxbig.h | 18 ++
>>>> 11 files changed, 501 insertions(+), 245 deletions(-)
>>>> create mode 100644
>>>> Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
>>>> create mode 100644
>>>> Documentation/devicetree/bindings/leds/leds-netxbig.txt
>>>> delete mode 100644 arch/arm/mach-mvebu/board.h
>>>> delete mode 100644 arch/arm/mach-mvebu/netxbig.c
>>>> create mode 100644 include/dt-bindings/leds/leds-netxbig.h
>>>>
>>>
>>>
>>
>
> [1]
> http://lists.infradead.org/pipermail/linux-arm-kernel/2015-July/353807.html
> [2]
> http://lists.infradead.org/pipermail/linux-arm-kernel/2015-June/351486.html
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2015-07-28 10:30 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-06-18 11:52 [PATCH v2 0/3] Add DT support for netxbig LEDs Simon Guinot
2015-06-18 11:52 ` Simon Guinot
2015-06-18 11:52 ` [PATCH v2 1/3] leds: netxbig: add device tree binding Simon Guinot
2015-06-18 11:52 ` Simon Guinot
2015-06-18 11:52 ` [PATCH v2 2/3] ARM: Kirkwood: add LED DT entries for netxbig boards Simon Guinot
2015-06-18 11:52 ` Simon Guinot
2015-06-29 12:45 ` Gregory CLEMENT
2015-06-29 12:45 ` Gregory CLEMENT
2015-06-18 11:52 ` [PATCH v2 3/3] ARM: mvebu: remove static LED setup " Simon Guinot
2015-06-18 11:52 ` Simon Guinot
2015-06-29 12:45 ` Gregory CLEMENT
2015-06-29 12:45 ` Gregory CLEMENT
2015-07-25 14:54 ` [PATCH v2 0/3] Add DT support for netxbig LEDs Gregory CLEMENT
2015-07-25 14:54 ` Gregory CLEMENT
2015-07-25 19:36 ` Jacek Anaszewski
2015-07-25 19:36 ` Jacek Anaszewski
2015-07-25 20:45 ` Jacek Anaszewski
2015-07-25 20:45 ` Jacek Anaszewski
2015-07-28 10:30 ` Gregory CLEMENT
2015-07-28 10:30 ` Gregory CLEMENT
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.