All of lore.kernel.org
 help / color / mirror / Atom feed
From: Toshi Kani <toshi.kani@hp.com>
To: rjw@rjwysocki.net, dan.j.williams@intel.com
Cc: linux-acpi@vger.kernel.org, linux-nvdimm@lists.01.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v3 0/3] Add NUMA support for NVDIMM devices
Date: Fri, 19 Jun 2015 12:18:31 -0600	[thread overview]
Message-ID: <1434737914-18466-1-git-send-email-toshi.kani@hp.com> (raw)

Since NVDIMMs are installed on memory slots, they expose the NUMA
topology of a platform.  This patchset adds support of sysfs
'numa_node' to I/O-related NVDIMM devices under /sys/bus/nd/devices.
This enables numactl(8) to accept 'block:' and 'file:' paths of pmem
and btt devices as shown in the examples below.
  numactl --preferred block:pmem0 --show
  numactl --preferred file:/dev/pmem0s --show

numactl can be used to bind an application to the locality of a target
NVDIMM for better performance.  A result of fio benchmark to ext4/dax
on an HP DL380 with 2 sockets for local & remote settings is shown
below.

  Local [1] :  4098.3MB/s
  Remote [2]:  3718.4MB/s

[1] numactl --preferred block:pmem0 --cpunodebind block:pmem0 fio <fs-on-pmem0> 
[2] numactl --preferred block:pmem1 --cpunodebind block:pmem1 fio <fs-on-pmem0>

Patch 1/3 applies on top of the acpica branch of the pm tree.
Patch 2/3-3/3 apply on top of Dan Williams's patch series
"libnvdimm: ->rw_bytes(), BLK-mode, unit tests, and misc features".

---
v3:
 - Update the comment of acpi_map_pxm_to_online_node(). (Rafael Wysocki)

v2:
 - Add acpi_map_pxm_to_online_node(), which returns an online node.
 - Manage visibility of sysfs numa_node with is_visible. (Dan Williams)
 - Check ACPI_NFIT_PROXIMITY_VALID in spa->flags.

---
Toshi Kani (3):
  1/3 acpi: Add acpi_map_pxm_to_online_node()
  2/3 libnvdimm: Set numa_node to NVDIMM devices
  3/3 libnvdimm: Add sysfs numa_node to NVDIMM devices

---
 drivers/acpi/nfit.c             |  7 ++++++
 drivers/acpi/numa.c             | 50 ++++++++++++++++++++++++++++++++++++++---
 drivers/nvdimm/btt.c            |  2 ++
 drivers/nvdimm/btt_devs.c       |  1 +
 drivers/nvdimm/bus.c            | 30 +++++++++++++++++++++++++
 drivers/nvdimm/namespace_devs.c |  1 +
 drivers/nvdimm/nd.h             |  1 +
 drivers/nvdimm/region.c         |  1 +
 drivers/nvdimm/region_devs.c    |  1 +
 include/linux/acpi.h            |  5 +++++
 include/linux/libnvdimm.h       |  2 ++
 11 files changed, 98 insertions(+), 3 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at  http://www.tux.org/lkml/

WARNING: multiple messages have this Message-ID (diff)
From: Toshi Kani <toshi.kani@hp.com>
To: rjw@rjwysocki.net, dan.j.williams@intel.com
Cc: linux-acpi@vger.kernel.org, linux-nvdimm@lists.01.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v3 0/3] Add NUMA support for NVDIMM devices
Date: Fri, 19 Jun 2015 12:18:31 -0600	[thread overview]
Message-ID: <1434737914-18466-1-git-send-email-toshi.kani@hp.com> (raw)

Since NVDIMMs are installed on memory slots, they expose the NUMA
topology of a platform.  This patchset adds support of sysfs
'numa_node' to I/O-related NVDIMM devices under /sys/bus/nd/devices.
This enables numactl(8) to accept 'block:' and 'file:' paths of pmem
and btt devices as shown in the examples below.
  numactl --preferred block:pmem0 --show
  numactl --preferred file:/dev/pmem0s --show

numactl can be used to bind an application to the locality of a target
NVDIMM for better performance.  A result of fio benchmark to ext4/dax
on an HP DL380 with 2 sockets for local & remote settings is shown
below.

  Local [1] :  4098.3MB/s
  Remote [2]:  3718.4MB/s

[1] numactl --preferred block:pmem0 --cpunodebind block:pmem0 fio <fs-on-pmem0> 
[2] numactl --preferred block:pmem1 --cpunodebind block:pmem1 fio <fs-on-pmem0>

Patch 1/3 applies on top of the acpica branch of the pm tree.
Patch 2/3-3/3 apply on top of Dan Williams's patch series
"libnvdimm: ->rw_bytes(), BLK-mode, unit tests, and misc features".

---
v3:
 - Update the comment of acpi_map_pxm_to_online_node(). (Rafael Wysocki)

v2:
 - Add acpi_map_pxm_to_online_node(), which returns an online node.
 - Manage visibility of sysfs numa_node with is_visible. (Dan Williams)
 - Check ACPI_NFIT_PROXIMITY_VALID in spa->flags.

---
Toshi Kani (3):
  1/3 acpi: Add acpi_map_pxm_to_online_node()
  2/3 libnvdimm: Set numa_node to NVDIMM devices
  3/3 libnvdimm: Add sysfs numa_node to NVDIMM devices

---
 drivers/acpi/nfit.c             |  7 ++++++
 drivers/acpi/numa.c             | 50 ++++++++++++++++++++++++++++++++++++++---
 drivers/nvdimm/btt.c            |  2 ++
 drivers/nvdimm/btt_devs.c       |  1 +
 drivers/nvdimm/bus.c            | 30 +++++++++++++++++++++++++
 drivers/nvdimm/namespace_devs.c |  1 +
 drivers/nvdimm/nd.h             |  1 +
 drivers/nvdimm/region.c         |  1 +
 drivers/nvdimm/region_devs.c    |  1 +
 include/linux/acpi.h            |  5 +++++
 include/linux/libnvdimm.h       |  2 ++
 11 files changed, 98 insertions(+), 3 deletions(-)

WARNING: multiple messages have this Message-ID (diff)
From: Toshi Kani <toshi.kani@hp.com>
To: rjw@rjwysocki.net, dan.j.williams@intel.com
Cc: linux-acpi@vger.kernel.org, linux-nvdimm@ml01.01.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v3 0/3] Add NUMA support for NVDIMM devices
Date: Fri, 19 Jun 2015 12:18:31 -0600	[thread overview]
Message-ID: <1434737914-18466-1-git-send-email-toshi.kani@hp.com> (raw)

Since NVDIMMs are installed on memory slots, they expose the NUMA
topology of a platform.  This patchset adds support of sysfs
'numa_node' to I/O-related NVDIMM devices under /sys/bus/nd/devices.
This enables numactl(8) to accept 'block:' and 'file:' paths of pmem
and btt devices as shown in the examples below.
  numactl --preferred block:pmem0 --show
  numactl --preferred file:/dev/pmem0s --show

numactl can be used to bind an application to the locality of a target
NVDIMM for better performance.  A result of fio benchmark to ext4/dax
on an HP DL380 with 2 sockets for local & remote settings is shown
below.

  Local [1] :  4098.3MB/s
  Remote [2]:  3718.4MB/s

[1] numactl --preferred block:pmem0 --cpunodebind block:pmem0 fio <fs-on-pmem0> 
[2] numactl --preferred block:pmem1 --cpunodebind block:pmem1 fio <fs-on-pmem0>

Patch 1/3 applies on top of the acpica branch of the pm tree.
Patch 2/3-3/3 apply on top of Dan Williams's patch series
"libnvdimm: ->rw_bytes(), BLK-mode, unit tests, and misc features".

---
v3:
 - Update the comment of acpi_map_pxm_to_online_node(). (Rafael Wysocki)

v2:
 - Add acpi_map_pxm_to_online_node(), which returns an online node.
 - Manage visibility of sysfs numa_node with is_visible. (Dan Williams)
 - Check ACPI_NFIT_PROXIMITY_VALID in spa->flags.

---
Toshi Kani (3):
  1/3 acpi: Add acpi_map_pxm_to_online_node()
  2/3 libnvdimm: Set numa_node to NVDIMM devices
  3/3 libnvdimm: Add sysfs numa_node to NVDIMM devices

---
 drivers/acpi/nfit.c             |  7 ++++++
 drivers/acpi/numa.c             | 50 ++++++++++++++++++++++++++++++++++++++---
 drivers/nvdimm/btt.c            |  2 ++
 drivers/nvdimm/btt_devs.c       |  1 +
 drivers/nvdimm/bus.c            | 30 +++++++++++++++++++++++++
 drivers/nvdimm/namespace_devs.c |  1 +
 drivers/nvdimm/nd.h             |  1 +
 drivers/nvdimm/region.c         |  1 +
 drivers/nvdimm/region_devs.c    |  1 +
 include/linux/acpi.h            |  5 +++++
 include/linux/libnvdimm.h       |  2 ++
 11 files changed, 98 insertions(+), 3 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at  http://www.tux.org/lkml/

             reply	other threads:[~2015-06-19 18:18 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-19 18:18 Toshi Kani [this message]
2015-06-19 18:18 ` [PATCH v3 0/3] Add NUMA support for NVDIMM devices Toshi Kani
2015-06-19 18:18 ` Toshi Kani
2015-06-19 18:18 ` [PATCH v3 1/3] acpi: Add acpi_map_pxm_to_online_node() Toshi Kani
2015-06-19 18:18   ` Toshi Kani
2015-06-19 18:18   ` Toshi Kani
2015-06-19 23:26   ` Rafael J. Wysocki
2015-06-19 23:26     ` Rafael J. Wysocki
2015-06-19 23:26     ` Rafael J. Wysocki
2015-06-19 23:11     ` Toshi Kani
2015-06-19 23:11       ` Toshi Kani
2015-06-19 23:11       ` Toshi Kani
2015-06-19 18:18 ` [PATCH v3 2/3] libnvdimm: Set numa_node to NVDIMM devices Toshi Kani
2015-06-19 18:18   ` Toshi Kani
2015-06-19 18:18   ` Toshi Kani
2015-06-24 16:50   ` Dan Williams
2015-06-24 16:50     ` Dan Williams
2015-06-24 17:05     ` Toshi Kani
2015-06-24 17:05       ` Toshi Kani
2015-06-24 17:08       ` Dan Williams
2015-06-24 17:08         ` Dan Williams
2015-06-24 17:14         ` Toshi Kani
2015-06-24 17:14           ` Toshi Kani
2015-06-19 18:18 ` [PATCH v3 3/3] libnvdimm: Add sysfs " Toshi Kani
2015-06-19 18:18   ` Toshi Kani
2015-06-19 18:18   ` Toshi Kani
2015-06-19 20:01   ` Brice Goglin
2015-06-19 20:01     ` Brice Goglin
2015-06-19 20:01     ` Brice Goglin
2015-06-19 20:16     ` Toshi Kani
2015-06-19 20:16       ` Toshi Kani
2015-06-19 20:16       ` Toshi Kani
2015-06-24  0:26   ` Dan Williams
2015-06-24  0:26     ` Dan Williams
2015-06-24  0:36     ` Dan Williams
2015-06-24  0:36       ` Dan Williams
2015-06-24 16:38     ` Toshi Kani
2015-06-24 16:38       ` Toshi Kani
2015-06-24 16:42       ` Dan Williams
2015-06-24 16:42         ` Dan Williams

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1434737914-18466-1-git-send-email-toshi.kani@hp.com \
    --to=toshi.kani@hp.com \
    --cc=dan.j.williams@intel.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-nvdimm@lists.01.org \
    --cc=rjw@rjwysocki.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.