[PATCH net-next] hv_netvsc: Add support to set MTU reservation from guest side

[PATCH net-next] hv_netvsc: Add support to set MTU reservation from guest side

[Haiyang Zhang]

When packet encapsulation is in use, the MTU needs to be reduced for
headroom reservation.
The existing code takes the updated MTU value only from the host side.
But vSwitch extensions, such as Open vSwitch, require the flexibility
to change the MTU to different values from within a guest during the
lifecycle of a vNIC, when the encapsulation protocol is changed. The
patch supports this kind of MTU changes.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
---
 drivers/net/hyperv/netvsc_drv.c   |    3 +--
 drivers/net/hyperv/rndis_filter.c |    2 +-
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 358475e..68e7ece 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -743,8 +743,7 @@ static int netvsc_change_mtu(struct net_device *ndev, int mtu)
 	if (nvdev->nvsp_version >= NVSP_PROTOCOL_VERSION_2)
 		limit = NETVSC_MTU - ETH_HLEN;
 
-	/* Hyper-V hosts don't support MTU < ETH_DATA_LEN (1500) */
-	if (mtu < ETH_DATA_LEN || mtu > limit)
+	if (mtu < 68 || mtu > limit)
 		return -EINVAL;
 
 	nvdev->start_remove = true;
diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c
index 006c1b8..172824e 100644
--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -1053,7 +1053,7 @@ int rndis_filter_device_add(struct hv_device *dev,
 	ret = rndis_filter_query_device(rndis_device,
 					RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE,
 					&mtu, &size);
-	if (ret == 0 && size == sizeof(u32))
+	if (ret == 0 && size == sizeof(u32) && mtu < net_device->ndev->mtu)
 		net_device->ndev->mtu = mtu;
 
 	/* Get the mac address */
-- 
1.7.4.1

[PATCH net-next] hv_netvsc: Add support to set MTU reservation from guest side

[Haiyang Zhang]

When packet encapsulation is in use, the MTU needs to be reduced for
headroom reservation.
The existing code takes the updated MTU value only from the host side.
But vSwitch extensions, such as Open vSwitch, require the flexibility
to change the MTU to different values from within a guest during the
lifecycle of a vNIC, when the encapsulation protocol is changed. The
patch supports this kind of MTU changes.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
---
 drivers/net/hyperv/netvsc_drv.c   |    3 +--
 drivers/net/hyperv/rndis_filter.c |    2 +-
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 358475e..68e7ece 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -743,8 +743,7 @@ static int netvsc_change_mtu(struct net_device *ndev, int mtu)
 	if (nvdev->nvsp_version >= NVSP_PROTOCOL_VERSION_2)
 		limit = NETVSC_MTU - ETH_HLEN;
 
-	/* Hyper-V hosts don't support MTU < ETH_DATA_LEN (1500) */
-	if (mtu < ETH_DATA_LEN || mtu > limit)
+	if (mtu < 68 || mtu > limit)
 		return -EINVAL;
 
 	nvdev->start_remove = true;
diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c
index 006c1b8..172824e 100644
--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -1053,7 +1053,7 @@ int rndis_filter_device_add(struct hv_device *dev,
 	ret = rndis_filter_query_device(rndis_device,
 					RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE,
 					&mtu, &size);
-	if (ret == 0 && size == sizeof(u32))
+	if (ret == 0 && size == sizeof(u32) && mtu < net_device->ndev->mtu)
 		net_device->ndev->mtu = mtu;
 
 	/* Get the mac address */
-- 
1.7.4.1

[PATCH net-next] hv_netvsc: Add support to set MTU reservation from guest side

[Haiyang Zhang]

When packet encapsulation is in use, the MTU needs to be reduced for
headroom reservation.
The existing code takes the updated MTU value only from the host side.
But vSwitch extensions, such as Open vSwitch, require the flexibility
to change the MTU to different values from within a guest during the
lifecycle of a vNIC, when the encapsulation protocol is changed. The
patch supports this kind of MTU changes.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
---
 drivers/net/hyperv/netvsc_drv.c   |    3 +--
 drivers/net/hyperv/rndis_filter.c |    2 +-
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 358475e..68e7ece 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -743,8 +743,7 @@ static int netvsc_change_mtu(struct net_device *ndev, int mtu)
 	if (nvdev->nvsp_version >= NVSP_PROTOCOL_VERSION_2)
 		limit = NETVSC_MTU - ETH_HLEN;
 
-	/* Hyper-V hosts don't support MTU < ETH_DATA_LEN (1500) */
-	if (mtu < ETH_DATA_LEN || mtu > limit)
+	if (mtu < 68 || mtu > limit)
 		return -EINVAL;
 
 	nvdev->start_remove = true;
diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c
index 006c1b8..172824e 100644
--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -1053,7 +1053,7 @@ int rndis_filter_device_add(struct hv_device *dev,
 	ret = rndis_filter_query_device(rndis_device,
 					RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE,
 					&mtu, &size);
-	if (ret == 0 && size == sizeof(u32))
+	if (ret == 0 && size == sizeof(u32) && mtu < net_device->ndev->mtu)
 		net_device->ndev->mtu = mtu;
 
 	/* Get the mac address */
-- 
1.7.4.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

RE: [PATCH net-next] hv_netvsc: Add support to set MTU reservation from guest side

[Haiyang Zhang]

> -----Original Message-----
> From: David Miller [mailto:davem@davemloft.net]
> Sent: Friday, July 3, 2015 12:17 PM
> To: dan.carpenter@oracle.com
> Cc: Haiyang Zhang; netdev@vger.kernel.org; olaf@aepfle.de;
> jasowang@redhat.com; driverdev-devel@linuxdriverproject.org; linux-
> kernel@vger.kernel.org
> Subject: Re: [PATCH net-next] hv_netvsc: Add support to set MTU
> reservation from guest side
> 
> From: Dan Carpenter <dan.carpenter@oracle.com>
> Date: Fri, 3 Jul 2015 14:28:47 +0300
> 
> > On Thu, Jul 02, 2015 at 01:17:35PM -0700, Haiyang Zhang wrote:
> >> When packet encapsulation is in use, the MTU needs to be reduced for
> >> headroom reservation.
> >> The existing code takes the updated MTU value only from the host side.
> >> But vSwitch extensions, such as Open vSwitch, require the flexibility
> >> to change the MTU to different values from within a guest during the
> >> lifecycle of a vNIC, when the encapsulation protocol is changed. The
> >> patch supports this kind of MTU changes.
> >>
> >> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
> >> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
> >> ---
> >>  drivers/net/hyperv/netvsc_drv.c   |    3 +--
> >>  drivers/net/hyperv/rndis_filter.c |    2 +-
> >>  2 files changed, 2 insertions(+), 3 deletions(-)
> >>
> >> diff --git a/drivers/net/hyperv/netvsc_drv.c
> b/drivers/net/hyperv/netvsc_drv.c
> >> index 358475e..68e7ece 100644
> >> --- a/drivers/net/hyperv/netvsc_drv.c
> >> +++ b/drivers/net/hyperv/netvsc_drv.c
> >> @@ -743,8 +743,7 @@ static int netvsc_change_mtu(struct net_device
> *ndev, int mtu)
> >>  	if (nvdev->nvsp_version >= NVSP_PROTOCOL_VERSION_2)
> >>  		limit = NETVSC_MTU - ETH_HLEN;
> >>
> >> -	/* Hyper-V hosts don't support MTU < ETH_DATA_LEN (1500) */
> >> -	if (mtu < ETH_DATA_LEN || mtu > limit)
> >> +	if (mtu < 68 || mtu > limit)
> >
> > How did you calculate 68?  Avoid magic numbers like this, make it a
> > define.
> 
> Agreed.

The number 68 is same as the common code in eth_change_mtu(). I think it
came from the protocol requirement:
https://en.wikipedia.org/wiki/Maximum_transmission_unit

Sure, I will put the number in a define, and resubmit the patch.

Thanks,
- Haiyang

RE: [PATCH net-next] hv_netvsc: Add support to set MTU reservation from guest side

[Haiyang Zhang]

> -----Original Message-----
> From: David Miller [mailto:davem@davemloft.net]
> Sent: Friday, July 3, 2015 12:17 PM
> To: dan.carpenter@oracle.com
> Cc: Haiyang Zhang; netdev@vger.kernel.org; olaf@aepfle.de;
> jasowang@redhat.com; driverdev-devel@linuxdriverproject.org; linux-
> kernel@vger.kernel.org
> Subject: Re: [PATCH net-next] hv_netvsc: Add support to set MTU
> reservation from guest side
> 
> From: Dan Carpenter <dan.carpenter@oracle.com>
> Date: Fri, 3 Jul 2015 14:28:47 +0300
> 
> > On Thu, Jul 02, 2015 at 01:17:35PM -0700, Haiyang Zhang wrote:
> >> When packet encapsulation is in use, the MTU needs to be reduced for
> >> headroom reservation.
> >> The existing code takes the updated MTU value only from the host side.
> >> But vSwitch extensions, such as Open vSwitch, require the flexibility
> >> to change the MTU to different values from within a guest during the
> >> lifecycle of a vNIC, when the encapsulation protocol is changed. The
> >> patch supports this kind of MTU changes.
> >>
> >> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
> >> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
> >> ---
> >>  drivers/net/hyperv/netvsc_drv.c   |    3 +--
> >>  drivers/net/hyperv/rndis_filter.c |    2 +-
> >>  2 files changed, 2 insertions(+), 3 deletions(-)
> >>
> >> diff --git a/drivers/net/hyperv/netvsc_drv.c
> b/drivers/net/hyperv/netvsc_drv.c
> >> index 358475e..68e7ece 100644
> >> --- a/drivers/net/hyperv/netvsc_drv.c
> >> +++ b/drivers/net/hyperv/netvsc_drv.c
> >> @@ -743,8 +743,7 @@ static int netvsc_change_mtu(struct net_device
> *ndev, int mtu)
> >>  	if (nvdev->nvsp_version >= NVSP_PROTOCOL_VERSION_2)
> >>  		limit = NETVSC_MTU - ETH_HLEN;
> >>
> >> -	/* Hyper-V hosts don't support MTU < ETH_DATA_LEN (1500) */
> >> -	if (mtu < ETH_DATA_LEN || mtu > limit)
> >> +	if (mtu < 68 || mtu > limit)
> >
> > How did you calculate 68?  Avoid magic numbers like this, make it a
> > define.
> 
> Agreed.

The number 68 is same as the common code in eth_change_mtu(). I think it
came from the protocol requirement:
https://en.wikipedia.org/wiki/Maximum_transmission_unit

Sure, I will put the number in a define, and resubmit the patch.

Thanks,
- Haiyang

RE: [PATCH net-next] hv_netvsc: Add support to set MTU reservation from guest side

[Haiyang Zhang]

> -----Original Message-----
> From: David Miller [mailto:davem@davemloft.net]
> Sent: Friday, July 3, 2015 12:17 PM
> To: dan.carpenter@oracle.com
> Cc: Haiyang Zhang; netdev@vger.kernel.org; olaf@aepfle.de;
> jasowang@redhat.com; driverdev-devel@linuxdriverproject.org; linux-
> kernel@vger.kernel.org
> Subject: Re: [PATCH net-next] hv_netvsc: Add support to set MTU
> reservation from guest side
> 
> From: Dan Carpenter <dan.carpenter@oracle.com>
> Date: Fri, 3 Jul 2015 14:28:47 +0300
> 
> > On Thu, Jul 02, 2015 at 01:17:35PM -0700, Haiyang Zhang wrote:
> >> When packet encapsulation is in use, the MTU needs to be reduced for
> >> headroom reservation.
> >> The existing code takes the updated MTU value only from the host side.
> >> But vSwitch extensions, such as Open vSwitch, require the flexibility
> >> to change the MTU to different values from within a guest during the
> >> lifecycle of a vNIC, when the encapsulation protocol is changed. The
> >> patch supports this kind of MTU changes.
> >>
> >> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
> >> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
> >> ---
> >>  drivers/net/hyperv/netvsc_drv.c   |    3 +--
> >>  drivers/net/hyperv/rndis_filter.c |    2 +-
> >>  2 files changed, 2 insertions(+), 3 deletions(-)
> >>
> >> diff --git a/drivers/net/hyperv/netvsc_drv.c
> b/drivers/net/hyperv/netvsc_drv.c
> >> index 358475e..68e7ece 100644
> >> --- a/drivers/net/hyperv/netvsc_drv.c
> >> +++ b/drivers/net/hyperv/netvsc_drv.c
> >> @@ -743,8 +743,7 @@ static int netvsc_change_mtu(struct net_device
> *ndev, int mtu)
> >>  	if (nvdev->nvsp_version >= NVSP_PROTOCOL_VERSION_2)
> >>  		limit = NETVSC_MTU - ETH_HLEN;
> >>
> >> -	/* Hyper-V hosts don't support MTU < ETH_DATA_LEN (1500) */
> >> -	if (mtu < ETH_DATA_LEN || mtu > limit)
> >> +	if (mtu < 68 || mtu > limit)
> >
> > How did you calculate 68?  Avoid magic numbers like this, make it a
> > define.
> 
> Agreed.

The number 68 is same as the common code in eth_change_mtu(). I think it
came from the protocol requirement:
https://en.wikipedia.org/wiki/Maximum_transmission_unit

Sure, I will put the number in a define, and resubmit the patch.

Thanks,
- Haiyang


_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH net-next] hv_netvsc: Add support to set MTU reservation from guest side

[David Miller]

From: Dan Carpenter <dan.carpenter@oracle.com>
Date: Fri, 3 Jul 2015 14:28:47 +0300

> On Thu, Jul 02, 2015 at 01:17:35PM -0700, Haiyang Zhang wrote:
>> When packet encapsulation is in use, the MTU needs to be reduced for
>> headroom reservation.
>> The existing code takes the updated MTU value only from the host side.
>> But vSwitch extensions, such as Open vSwitch, require the flexibility
>> to change the MTU to different values from within a guest during the
>> lifecycle of a vNIC, when the encapsulation protocol is changed. The
>> patch supports this kind of MTU changes.
>> 
>> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
>> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
>> ---
>>  drivers/net/hyperv/netvsc_drv.c   |    3 +--
>>  drivers/net/hyperv/rndis_filter.c |    2 +-
>>  2 files changed, 2 insertions(+), 3 deletions(-)
>> 
>> diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
>> index 358475e..68e7ece 100644
>> --- a/drivers/net/hyperv/netvsc_drv.c
>> +++ b/drivers/net/hyperv/netvsc_drv.c
>> @@ -743,8 +743,7 @@ static int netvsc_change_mtu(struct net_device *ndev, int mtu)
>>  	if (nvdev->nvsp_version >= NVSP_PROTOCOL_VERSION_2)
>>  		limit = NETVSC_MTU - ETH_HLEN;
>>  
>> -	/* Hyper-V hosts don't support MTU < ETH_DATA_LEN (1500) */
>> -	if (mtu < ETH_DATA_LEN || mtu > limit)
>> +	if (mtu < 68 || mtu > limit)
> 
> How did you calculate 68?  Avoid magic numbers like this, make it a
> define.

Agreed.

Re: [PATCH net-next] hv_netvsc: Add support to set MTU reservation from guest side

[David Miller]

From: Dan Carpenter <dan.carpenter@oracle.com>
Date: Fri, 3 Jul 2015 14:28:47 +0300

> On Thu, Jul 02, 2015 at 01:17:35PM -0700, Haiyang Zhang wrote:
>> When packet encapsulation is in use, the MTU needs to be reduced for
>> headroom reservation.
>> The existing code takes the updated MTU value only from the host side.
>> But vSwitch extensions, such as Open vSwitch, require the flexibility
>> to change the MTU to different values from within a guest during the
>> lifecycle of a vNIC, when the encapsulation protocol is changed. The
>> patch supports this kind of MTU changes.
>> 
>> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
>> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
>> ---
>>  drivers/net/hyperv/netvsc_drv.c   |    3 +--
>>  drivers/net/hyperv/rndis_filter.c |    2 +-
>>  2 files changed, 2 insertions(+), 3 deletions(-)
>> 
>> diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
>> index 358475e..68e7ece 100644
>> --- a/drivers/net/hyperv/netvsc_drv.c
>> +++ b/drivers/net/hyperv/netvsc_drv.c
>> @@ -743,8 +743,7 @@ static int netvsc_change_mtu(struct net_device *ndev, int mtu)
>>  	if (nvdev->nvsp_version >= NVSP_PROTOCOL_VERSION_2)
>>  		limit = NETVSC_MTU - ETH_HLEN;
>>  
>> -	/* Hyper-V hosts don't support MTU < ETH_DATA_LEN (1500) */
>> -	if (mtu < ETH_DATA_LEN || mtu > limit)
>> +	if (mtu < 68 || mtu > limit)
> 
> How did you calculate 68?  Avoid magic numbers like this, make it a
> define.

Agreed.
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH net-next] hv_netvsc: Add support to set MTU reservation from guest side

[Dan Carpenter]

On Thu, Jul 02, 2015 at 01:17:35PM -0700, Haiyang Zhang wrote:
> When packet encapsulation is in use, the MTU needs to be reduced for
> headroom reservation.
> The existing code takes the updated MTU value only from the host side.
> But vSwitch extensions, such as Open vSwitch, require the flexibility
> to change the MTU to different values from within a guest during the
> lifecycle of a vNIC, when the encapsulation protocol is changed. The
> patch supports this kind of MTU changes.
> 
> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
> ---
>  drivers/net/hyperv/netvsc_drv.c   |    3 +--
>  drivers/net/hyperv/rndis_filter.c |    2 +-
>  2 files changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
> index 358475e..68e7ece 100644
> --- a/drivers/net/hyperv/netvsc_drv.c
> +++ b/drivers/net/hyperv/netvsc_drv.c
> @@ -743,8 +743,7 @@ static int netvsc_change_mtu(struct net_device *ndev, int mtu)
>  	if (nvdev->nvsp_version >= NVSP_PROTOCOL_VERSION_2)
>  		limit = NETVSC_MTU - ETH_HLEN;
>  
> -	/* Hyper-V hosts don't support MTU < ETH_DATA_LEN (1500) */
> -	if (mtu < ETH_DATA_LEN || mtu > limit)
> +	if (mtu < 68 || mtu > limit)

How did you calculate 68?  Avoid magic numbers like this, make it a
define.

regards,
dan carpenter

Re: [PATCH net-next] hv_netvsc: Add support to set MTU reservation from guest side

[Dan Carpenter]

On Thu, Jul 02, 2015 at 01:17:35PM -0700, Haiyang Zhang wrote:
> When packet encapsulation is in use, the MTU needs to be reduced for
> headroom reservation.
> The existing code takes the updated MTU value only from the host side.
> But vSwitch extensions, such as Open vSwitch, require the flexibility
> to change the MTU to different values from within a guest during the
> lifecycle of a vNIC, when the encapsulation protocol is changed. The
> patch supports this kind of MTU changes.
> 
> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
> ---
>  drivers/net/hyperv/netvsc_drv.c   |    3 +--
>  drivers/net/hyperv/rndis_filter.c |    2 +-
>  2 files changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
> index 358475e..68e7ece 100644
> --- a/drivers/net/hyperv/netvsc_drv.c
> +++ b/drivers/net/hyperv/netvsc_drv.c
> @@ -743,8 +743,7 @@ static int netvsc_change_mtu(struct net_device *ndev, int mtu)
>  	if (nvdev->nvsp_version >= NVSP_PROTOCOL_VERSION_2)
>  		limit = NETVSC_MTU - ETH_HLEN;
>  
> -	/* Hyper-V hosts don't support MTU < ETH_DATA_LEN (1500) */
> -	if (mtu < ETH_DATA_LEN || mtu > limit)
> +	if (mtu < 68 || mtu > limit)

How did you calculate 68?  Avoid magic numbers like this, make it a
define.

regards,
dan carpenter

Re: [PATCH net-next] hv_netvsc: Add support to set MTU reservation from guest side

[Dan Carpenter]

On Thu, Jul 02, 2015 at 01:17:35PM -0700, Haiyang Zhang wrote:
> When packet encapsulation is in use, the MTU needs to be reduced for
> headroom reservation.
> The existing code takes the updated MTU value only from the host side.
> But vSwitch extensions, such as Open vSwitch, require the flexibility
> to change the MTU to different values from within a guest during the
> lifecycle of a vNIC, when the encapsulation protocol is changed. The
> patch supports this kind of MTU changes.
> 
> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
> ---
>  drivers/net/hyperv/netvsc_drv.c   |    3 +--
>  drivers/net/hyperv/rndis_filter.c |    2 +-
>  2 files changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
> index 358475e..68e7ece 100644
> --- a/drivers/net/hyperv/netvsc_drv.c
> +++ b/drivers/net/hyperv/netvsc_drv.c
> @@ -743,8 +743,7 @@ static int netvsc_change_mtu(struct net_device *ndev, int mtu)
>  	if (nvdev->nvsp_version >= NVSP_PROTOCOL_VERSION_2)
>  		limit = NETVSC_MTU - ETH_HLEN;
>  
> -	/* Hyper-V hosts don't support MTU < ETH_DATA_LEN (1500) */
> -	if (mtu < ETH_DATA_LEN || mtu > limit)
> +	if (mtu < 68 || mtu > limit)

How did you calculate 68?  Avoid magic numbers like this, make it a
define.

regards,
dan carpenter

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH net-next] hv_netvsc: Add support to set MTU reservation from guest side

[Haiyang Zhang]

When packet encapsulation is in use, the MTU needs to be reduced for
headroom reservation.
The existing code takes the updated MTU value only from the host side.
But vSwitch extensions, such as Open vSwitch, require the flexibility
to change the MTU to different values from within a guest during the
lifecycle of a vNIC, when the encapsulation protocol is changed. The
patch supports this kind of MTU changes.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
---
 drivers/net/hyperv/netvsc_drv.c   |    3 +--
 drivers/net/hyperv/rndis_filter.c |    2 +-
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 358475e..68e7ece 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -743,8 +743,7 @@ static int netvsc_change_mtu(struct net_device *ndev, int mtu)
 	if (nvdev->nvsp_version >= NVSP_PROTOCOL_VERSION_2)
 		limit = NETVSC_MTU - ETH_HLEN;
 
-	/* Hyper-V hosts don't support MTU < ETH_DATA_LEN (1500) */
-	if (mtu < ETH_DATA_LEN || mtu > limit)
+	if (mtu < 68 || mtu > limit)
 		return -EINVAL;
 
 	nvdev->start_remove = true;
diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c
index 006c1b8..172824e 100644
--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -1053,7 +1053,7 @@ int rndis_filter_device_add(struct hv_device *dev,
 	ret = rndis_filter_query_device(rndis_device,
 					RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE,
 					&mtu, &size);
-	if (ret == 0 && size == sizeof(u32))
+	if (ret == 0 && size == sizeof(u32) && mtu < net_device->ndev->mtu)
 		net_device->ndev->mtu = mtu;
 
 	/* Get the mac address */
-- 
1.7.4.1

[PATCH net-next] hv_netvsc: Add support to set MTU reservation from guest side

[Haiyang Zhang]

When packet encapsulation is in use, the MTU needs to be reduced for
headroom reservation.
The existing code takes the updated MTU value only from the host side.
But vSwitch extensions, such as Open vSwitch, require the flexibility
to change the MTU to different values from within a guest during the
lifecycle of a vNIC, when the encapsulation protocol is changed. The
patch supports this kind of MTU changes.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
---
 drivers/net/hyperv/netvsc_drv.c   |    3 +--
 drivers/net/hyperv/rndis_filter.c |    2 +-
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 358475e..68e7ece 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -743,8 +743,7 @@ static int netvsc_change_mtu(struct net_device *ndev, int mtu)
 	if (nvdev->nvsp_version >= NVSP_PROTOCOL_VERSION_2)
 		limit = NETVSC_MTU - ETH_HLEN;
 
-	/* Hyper-V hosts don't support MTU < ETH_DATA_LEN (1500) */
-	if (mtu < ETH_DATA_LEN || mtu > limit)
+	if (mtu < 68 || mtu > limit)
 		return -EINVAL;
 
 	nvdev->start_remove = true;
diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c
index 006c1b8..172824e 100644
--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -1053,7 +1053,7 @@ int rndis_filter_device_add(struct hv_device *dev,
 	ret = rndis_filter_query_device(rndis_device,
 					RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE,
 					&mtu, &size);
-	if (ret == 0 && size == sizeof(u32))
+	if (ret == 0 && size == sizeof(u32) && mtu < net_device->ndev->mtu)
 		net_device->ndev->mtu = mtu;
 
 	/* Get the mac address */
-- 
1.7.4.1

[PATCH net-next] hv_netvsc: Add support to set MTU reservation from guest side

[Haiyang Zhang]

When packet encapsulation is in use, the MTU needs to be reduced for
headroom reservation.
The existing code takes the updated MTU value only from the host side.
But vSwitch extensions, such as Open vSwitch, require the flexibility
to change the MTU to different values from within a guest during the
lifecycle of a vNIC, when the encapsulation protocol is changed. The
patch supports this kind of MTU changes.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
---
 drivers/net/hyperv/netvsc_drv.c   |    3 +--
 drivers/net/hyperv/rndis_filter.c |    2 +-
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 358475e..68e7ece 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -743,8 +743,7 @@ static int netvsc_change_mtu(struct net_device *ndev, int mtu)
 	if (nvdev->nvsp_version >= NVSP_PROTOCOL_VERSION_2)
 		limit = NETVSC_MTU - ETH_HLEN;
 
-	/* Hyper-V hosts don't support MTU < ETH_DATA_LEN (1500) */
-	if (mtu < ETH_DATA_LEN || mtu > limit)
+	if (mtu < 68 || mtu > limit)
 		return -EINVAL;
 
 	nvdev->start_remove = true;
diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c
index 006c1b8..172824e 100644
--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -1053,7 +1053,7 @@ int rndis_filter_device_add(struct hv_device *dev,
 	ret = rndis_filter_query_device(rndis_device,
 					RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE,
 					&mtu, &size);
-	if (ret == 0 && size == sizeof(u32))
+	if (ret == 0 && size == sizeof(u32) && mtu < net_device->ndev->mtu)
 		net_device->ndev->mtu = mtu;
 
 	/* Get the mac address */
-- 
1.7.4.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel