[PATCH V3 00/10] [SCSI] aacraid: Patchset for aacraid driver version 41010

[PATCH V3 00/10] [SCSI] aacraid: Patchset for aacraid driver version 41010

[rajinikanth.pandurangan]

From: Rajinikanth Pandurangan <rajinikanth.pandurangan@pmcs.com>

This patchset includes the following changes (bug fixes and new feature support)
specific to aacraid driver.

V3:
Increased msleep() time from 1 to 20.
Created new patch for pci_enable_msix() replacement.
Changed subject/description of patch 03.


Rajinikanth Pandurangan (10):
  [SCSI] aacraid: Fix for logical device name and UID not exposed to the OS
  [SCSI] aacraid: Add Power Management support
  [SCSI] aacraid: Change interrupt mode to MSI for series-6 controller
  [SCSI] aacraid: Enable 64-bit write to controller register
  [SCSI] aacraid: Tune response path if IsFastPath bit set
  [SCSI] aacraid: Reset irq affinity hints before releasing irq
  [SCSI] aacraid: Unblock IOCTLs to controller once system resumed from suspend
  [SCSI] aacraid: Send commit-config to controller firmware
  [SCSI] aacraid: Update driver version
  [SCSI] aacraid: Replace pci_enable_msix() with pci_enable_msix_exact()

 drivers/scsi/aacraid/aachba.c   | 263 +++++++++++++++++++++-------------------
 drivers/scsi/aacraid/aacraid.h  |  18 ++-
 drivers/scsi/aacraid/comminit.c | 155 ++++++++++++-----------
 drivers/scsi/aacraid/commsup.c  | 113 ++++++++++++-----
 drivers/scsi/aacraid/linit.c    | 159 +++++++++++++++++++++++-
 drivers/scsi/aacraid/rx.c       |   1 +
 drivers/scsi/aacraid/sa.c       |   1 +
 drivers/scsi/aacraid/src.c      |  64 +++-------
 8 files changed, 491 insertions(+), 283 deletions(-)

-- 
1.9.3

[PATCH V3 01/10] [SCSI] aacraid: Fix for logical device name and UID not exposed to the OS

[rajinikanth.pandurangan]

From: Rajinikanth Pandurangan <rajinikanth.pandurangan@pmcs.com>

Description:
        Driver sends the right size of the response buffer.

Changes from V2:
None

V2:
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>

Signed-off-by: Rajinikanth Pandurangan <rajinikanth.pandurangan@pmcs.com>
---
 drivers/scsi/aacraid/aachba.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 9b3dd6e..fe59b00 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -570,7 +570,7 @@ static int aac_get_container_name(struct scsi_cmnd * scsicmd)
 
 	status = aac_fib_send(ContainerCommand,
 		  cmd_fibcontext,
-		  sizeof (struct aac_get_name),
+		  sizeof(struct aac_get_name_resp),
 		  FsaNormal,
 		  0, 1,
 		  (fib_callback)get_container_name_callback,
@@ -1052,7 +1052,7 @@ static int aac_get_container_serial(struct scsi_cmnd * scsicmd)
 
 	status = aac_fib_send(ContainerCommand,
 		  cmd_fibcontext,
-		  sizeof (struct aac_get_serial),
+		  sizeof(struct aac_get_serial_resp),
 		  FsaNormal,
 		  0, 1,
 		  (fib_callback) get_container_serial_callback,
-- 
1.9.3

[PATCH V3 02/10] [SCSI] aacraid: Add Power Management support

[rajinikanth.pandurangan]

From: Rajinikanth Pandurangan <rajinikanth.pandurangan@pmcs.com>

Description:
        * .suspend() and .resume() routines implemented in the driver
        * aac_release_resources() initiates firmware shutdown
        * aac_acquire_resources re-initializes the host interface

Changes from V2:
Increased msleep(1) to msleep(20)
Reverted pci_enable_msix_exact() to pci_enable_msix() as this change
has moved into a separate patch.

Reviewed by:
Tomas Henzl <thenzl@redhat.com>,
Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>,
Johannes Thumshirn <jthumshirn@suse.de>,
James Bottomley <James.Bottomley@HansenPartnership.com>

Signed-off-by: Rajinikanth Pandurangan <rajinikanth.pandurangan@pmcs.com>
---
 drivers/scsi/aacraid/aacraid.h  |   5 ++
 drivers/scsi/aacraid/comminit.c | 154 ++++++++++++++++++++--------------------
 drivers/scsi/aacraid/linit.c    | 147 ++++++++++++++++++++++++++++++++++++++
 drivers/scsi/aacraid/rx.c       |   1 +
 drivers/scsi/aacraid/sa.c       |   1 +
 drivers/scsi/aacraid/src.c      |   2 +
 6 files changed, 232 insertions(+), 78 deletions(-)

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 40fe65c..62b0999 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -547,6 +547,7 @@ struct adapter_ops
 	int  (*adapter_sync_cmd)(struct aac_dev *dev, u32 command, u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4);
 	int  (*adapter_check_health)(struct aac_dev *dev);
 	int  (*adapter_restart)(struct aac_dev *dev, int bled);
+	void (*adapter_start)(struct aac_dev *dev);
 	/* Transport operations */
 	int  (*adapter_ioremap)(struct aac_dev * dev, u32 size);
 	irq_handler_t adapter_intr;
@@ -1247,6 +1248,9 @@ struct aac_dev
 #define aac_adapter_restart(dev,bled) \
 	(dev)->a_ops.adapter_restart(dev,bled)
 
+#define aac_adapter_start(dev) \
+	((dev)->a_ops.adapter_start(dev))
+
 #define aac_adapter_ioremap(dev, size) \
 	(dev)->a_ops.adapter_ioremap(dev, size)
 
@@ -2127,6 +2131,7 @@ int aac_sa_init(struct aac_dev *dev);
 int aac_src_init(struct aac_dev *dev);
 int aac_srcv_init(struct aac_dev *dev);
 int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_fib * hw_fib, int wait, struct fib * fibptr, unsigned long *nonotify);
+void aac_define_int_mode(struct aac_dev *dev);
 unsigned int aac_response_normal(struct aac_queue * q);
 unsigned int aac_command_normal(struct aac_queue * q);
 unsigned int aac_intr_normal(struct aac_dev *dev, u32 Index,
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index 45db84a..45a0a04 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -43,8 +43,6 @@
 
 #include "aacraid.h"
 
-static void aac_define_int_mode(struct aac_dev *dev);
-
 struct aac_common aac_config = {
 	.irq_mod = 1
 };
@@ -338,6 +336,82 @@ static int aac_comm_init(struct aac_dev * dev)
 	return 0;
 }
 
+void aac_define_int_mode(struct aac_dev *dev)
+{
+	int i, msi_count;
+
+	msi_count = i = 0;
+	/* max. vectors from GET_COMM_PREFERRED_SETTINGS */
+	if (dev->max_msix == 0 ||
+	    dev->pdev->device == PMC_DEVICE_S6 ||
+	    dev->sync_mode) {
+		dev->max_msix = 1;
+		dev->vector_cap =
+			dev->scsi_host_ptr->can_queue +
+			AAC_NUM_MGT_FIB;
+		return;
+	}
+
+	/* Don't bother allocating more MSI-X vectors than cpus */
+	msi_count = min(dev->max_msix,
+		(unsigned int)num_online_cpus());
+
+	dev->max_msix = msi_count;
+
+	if (msi_count > AAC_MAX_MSIX)
+		msi_count = AAC_MAX_MSIX;
+
+	for (i = 0; i < msi_count; i++)
+		dev->msixentry[i].entry = i;
+
+	if (msi_count > 1 &&
+	    pci_find_capability(dev->pdev, PCI_CAP_ID_MSIX)) {
+		i = pci_enable_msix(dev->pdev,
+				    dev->msixentry,
+				    msi_count);
+		 /* Check how many MSIX vectors are allocated */
+		if (i >= 0) {
+			dev->msi_enabled = 1;
+			if (i) {
+				msi_count = i;
+				if (pci_enable_msix(dev->pdev,
+				    dev->msixentry,
+				    msi_count)) {
+					dev->msi_enabled = 0;
+					printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
+							dev->name, dev->id, i);
+				}
+			}
+		} else {
+			dev->msi_enabled = 0;
+			printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
+					dev->name, dev->id, i);
+		}
+	}
+
+	if (!dev->msi_enabled) {
+		msi_count = 1;
+		i = pci_enable_msi(dev->pdev);
+
+		if (!i) {
+			dev->msi_enabled = 1;
+			dev->msi = 1;
+		} else {
+			printk(KERN_ERR "%s%d: MSI not supported!! Will try INTx 0x%x.\n",
+					dev->name, dev->id, i);
+		}
+	}
+
+	if (!dev->msi_enabled)
+		dev->max_msix = msi_count = 1;
+	else {
+		if (dev->max_msix > msi_count)
+			dev->max_msix = msi_count;
+	}
+	dev->vector_cap =
+		(dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB) /
+		msi_count;
+}
 struct aac_dev *aac_init_adapter(struct aac_dev *dev)
 {
 	u32 status[5];
@@ -508,79 +582,3 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev)
 	return dev;
 }
 
-static void aac_define_int_mode(struct aac_dev *dev)
-{
-
-	int i, msi_count;
-
-	msi_count = i = 0;
-	/* max. vectors from GET_COMM_PREFERRED_SETTINGS */
-	if (dev->max_msix == 0 ||
-	    dev->pdev->device == PMC_DEVICE_S6 ||
-	    dev->sync_mode) {
-		dev->max_msix = 1;
-		dev->vector_cap =
-			dev->scsi_host_ptr->can_queue +
-			AAC_NUM_MGT_FIB;
-		return;
-	}
-
-	msi_count = min(dev->max_msix,
-		(unsigned int)num_online_cpus());
-
-	dev->max_msix = msi_count;
-
-	if (msi_count > AAC_MAX_MSIX)
-		msi_count = AAC_MAX_MSIX;
-
-	for (i = 0; i < msi_count; i++)
-		dev->msixentry[i].entry = i;
-
-	if (msi_count > 1 &&
-	    pci_find_capability(dev->pdev, PCI_CAP_ID_MSIX)) {
-		i = pci_enable_msix(dev->pdev,
-				    dev->msixentry,
-				    msi_count);
-		 /* Check how many MSIX vectors are allocated */
-		if (i >= 0) {
-			dev->msi_enabled = 1;
-			if (i) {
-				msi_count = i;
-				if (pci_enable_msix(dev->pdev,
-				    dev->msixentry,
-				    msi_count)) {
-					dev->msi_enabled = 0;
-					printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
-							dev->name, dev->id, i);
-				}
-			}
-		} else {
-			dev->msi_enabled = 0;
-			printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
-					dev->name, dev->id, i);
-		}
-	}
-
-	if (!dev->msi_enabled) {
-		msi_count = 1;
-		i = pci_enable_msi(dev->pdev);
-
-		if (!i) {
-			dev->msi_enabled = 1;
-			dev->msi = 1;
-		} else {
-			printk(KERN_ERR "%s%d: MSI not supported!! Will try INTx 0x%x.\n",
-					dev->name, dev->id, i);
-		}
-	}
-
-	if (!dev->msi_enabled)
-		dev->max_msix = msi_count = 1;
-	else {
-		if (dev->max_msix > msi_count)
-			dev->max_msix = msi_count;
-	}
-	dev->vector_cap =
-		(dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB) /
-		msi_count;
-}
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 9eec027..37375cf 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1317,6 +1317,149 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	return error;
 }
 
+#if (defined(CONFIG_PM))
+void aac_release_resources(struct aac_dev *aac)
+{
+	int i;
+
+	aac_adapter_disable_int(aac);
+	if (aac->pdev->device == PMC_DEVICE_S6 ||
+	    aac->pdev->device == PMC_DEVICE_S7 ||
+	    aac->pdev->device == PMC_DEVICE_S8 ||
+	    aac->pdev->device == PMC_DEVICE_S9) {
+		if (aac->max_msix > 1) {
+			for (i = 0; i < aac->max_msix; i++)
+				free_irq(aac->msixentry[i].vector,
+					&(aac->aac_msix[i]));
+		} else {
+			free_irq(aac->pdev->irq, &(aac->aac_msix[0]));
+		}
+	} else {
+		free_irq(aac->pdev->irq, aac);
+	}
+	if (aac->msi)
+		pci_disable_msi(aac->pdev);
+	else if (aac->max_msix > 1)
+		pci_disable_msix(aac->pdev);
+
+}
+
+static int aac_acquire_resources(struct aac_dev *dev)
+{
+	int i, j;
+	int instance = dev->id;
+	const char *name = dev->name;
+	unsigned long status;
+	/*
+	 *	First clear out all interrupts.  Then enable the one's that we
+	 *	can handle.
+	 */
+	while (!((status = src_readl(dev, MUnit.OMR)) & KERNEL_UP_AND_RUNNING)
+		|| status == 0xffffffff)
+			msleep(20);
+
+	aac_adapter_disable_int(dev);
+	aac_adapter_enable_int(dev);
+
+
+	if ((dev->pdev->device == PMC_DEVICE_S7 ||
+	     dev->pdev->device == PMC_DEVICE_S8 ||
+	     dev->pdev->device == PMC_DEVICE_S9))
+		aac_define_int_mode(dev);
+
+	if (dev->msi_enabled)
+		aac_src_access_devreg(dev, AAC_ENABLE_MSIX);
+
+	if (!dev->sync_mode && dev->msi_enabled && dev->max_msix > 1) {
+		for (i = 0; i < dev->max_msix; i++) {
+			dev->aac_msix[i].vector_no = i;
+			dev->aac_msix[i].dev = dev;
+
+			if (request_irq(dev->msixentry[i].vector,
+					dev->a_ops.adapter_intr,
+					0, "aacraid", &(dev->aac_msix[i]))) {
+				printk(KERN_ERR "%s%d: Failed to register IRQ for vector %d.\n",
+						name, instance, i);
+				for (j = 0 ; j < i ; j++)
+					free_irq(dev->msixentry[j].vector,
+						 &(dev->aac_msix[j]));
+				pci_disable_msix(dev->pdev);
+				goto error_iounmap;
+			}
+		}
+	} else {
+		dev->aac_msix[0].vector_no = 0;
+		dev->aac_msix[0].dev = dev;
+
+		if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
+			IRQF_SHARED, "aacraid",
+			&(dev->aac_msix[0])) < 0) {
+			if (dev->msi)
+				pci_disable_msi(dev->pdev);
+			printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
+					name, instance);
+			goto error_iounmap;
+		}
+	}
+
+	aac_adapter_enable_int(dev);
+
+	if (!dev->sync_mode)
+		aac_adapter_start(dev);
+	return 0;
+
+error_iounmap:
+	return -1;
+
+}
+static int aac_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct aac_dev *aac = (struct aac_dev *)shost->hostdata;
+
+	scsi_block_requests(shost);
+	aac_send_shutdown(aac);
+
+	aac_release_resources(aac);
+
+	pci_set_drvdata(pdev, shost);
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+	return 0;
+}
+
+static int aac_resume(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct aac_dev *aac = (struct aac_dev *)shost->hostdata;
+	int r;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_enable_wake(pdev, PCI_D0, 0);
+	pci_restore_state(pdev);
+	r = pci_enable_device(pdev);
+
+	if (r)
+		goto fail_device;
+
+	pci_set_master(pdev);
+	if (aac_acquire_resources(aac))
+		goto fail_device;
+	scsi_unblock_requests(shost);
+
+	return 0;
+
+fail_device:
+	printk(KERN_INFO "%s%d: resume failed.\n", aac->name, aac->id);
+	scsi_host_put(shost);
+	pci_disable_device(pdev);
+	return -ENODEV;
+}
+#endif
+
 static void aac_shutdown(struct pci_dev *dev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(dev);
@@ -1356,6 +1499,10 @@ static struct pci_driver aac_pci_driver = {
 	.id_table	= aac_pci_tbl,
 	.probe		= aac_probe_one,
 	.remove		= aac_remove_one,
+#if (defined(CONFIG_PM))
+	.suspend	= aac_suspend,
+	.resume		= aac_resume,
+#endif
 	.shutdown	= aac_shutdown,
 };
 
diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c
index 9570612..ac16380 100644
--- a/drivers/scsi/aacraid/rx.c
+++ b/drivers/scsi/aacraid/rx.c
@@ -623,6 +623,7 @@ int _aac_rx_init(struct aac_dev *dev)
 	dev->a_ops.adapter_sync_cmd = rx_sync_cmd;
 	dev->a_ops.adapter_check_health = aac_rx_check_health;
 	dev->a_ops.adapter_restart = aac_rx_restart_adapter;
+	dev->a_ops.adapter_start = aac_rx_start_adapter;
 
 	/*
 	 *	First clear out all interrupts.  Then enable the one's that we
diff --git a/drivers/scsi/aacraid/sa.c b/drivers/scsi/aacraid/sa.c
index e66477c..869aea2 100644
--- a/drivers/scsi/aacraid/sa.c
+++ b/drivers/scsi/aacraid/sa.c
@@ -372,6 +372,7 @@ int aac_sa_init(struct aac_dev *dev)
 	dev->a_ops.adapter_sync_cmd = sa_sync_cmd;
 	dev->a_ops.adapter_check_health = aac_sa_check_health;
 	dev->a_ops.adapter_restart = aac_sa_restart_adapter;
+	dev->a_ops.adapter_start = aac_sa_start_adapter;
 	dev->a_ops.adapter_intr = aac_sa_intr;
 	dev->a_ops.adapter_deliver = aac_rx_deliver_producer;
 	dev->a_ops.adapter_ioremap = aac_sa_ioremap;
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index e63cf9f..b147341 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -726,6 +726,7 @@ int aac_src_init(struct aac_dev *dev)
 	dev->a_ops.adapter_sync_cmd = src_sync_cmd;
 	dev->a_ops.adapter_check_health = aac_src_check_health;
 	dev->a_ops.adapter_restart = aac_src_restart_adapter;
+	dev->a_ops.adapter_start = aac_src_start_adapter;
 
 	/*
 	 *	First clear out all interrupts.  Then enable the one's that we
@@ -892,6 +893,7 @@ int aac_srcv_init(struct aac_dev *dev)
 	dev->a_ops.adapter_sync_cmd = src_sync_cmd;
 	dev->a_ops.adapter_check_health = aac_src_check_health;
 	dev->a_ops.adapter_restart = aac_src_restart_adapter;
+	dev->a_ops.adapter_start = aac_src_start_adapter;
 
 	/*
 	 *	First clear out all interrupts.  Then enable the one's that we
-- 
1.9.3

[PATCH V3 03/10] [SCSI] aacraid: Change interrupt mode to MSI for series-6 controller

[rajinikanth.pandurangan]

From: Rajinikanth Pandurangan <rajinikanth.pandurangan@pmcs.com>

Description:
        This change always sets MSI interrupt mode for series-6 controller.
Note: For series 6 family, MSIx is not supported.

Changes from V2:
Only Subject & description change.

Reviewed by:
 Tomas Henzl <thenzl@redhat.com>,
 Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>,
 Johannes Thumshirn <jthumshirn@suse.de>

Signed-off-by: Rajinikanth Pandurangan <rajinikanth.pandurangan@pmcs.com>
---
 drivers/scsi/aacraid/src.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index b147341..eb07b3d 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -742,7 +742,7 @@ int aac_src_init(struct aac_dev *dev)
 	if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE1)
 		goto error_iounmap;
 
-	dev->msi = aac_msi && !pci_enable_msi(dev->pdev);
+	dev->msi = !pci_enable_msi(dev->pdev);
 
 	dev->aac_msix[0].vector_no = 0;
 	dev->aac_msix[0].dev = dev;
-- 
1.9.3

[PATCH V3 04/10] [SCSI] aacraid: Enable 64-bit write to controller register

[rajinikanth.pandurangan]

From: Rajinikanth Pandurangan <rajinikanth.pandurangan@pmcs.com>

Description:
        If writeq() not supported, then do atomic two 32bit write

Changes from V2:
None

Reviewed by:
 Tomas Henzl <thenzl@redhat.com>,
 Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>,
 Johannes Thumshirn <jthumshirn@suse.de>

Signed-off-by: Rajinikanth Pandurangan <rajinikanth.pandurangan@pmcs.com>
---
 drivers/scsi/aacraid/aacraid.h  |  9 +++++++++
 drivers/scsi/aacraid/comminit.c |  1 +
 drivers/scsi/aacraid/src.c      | 12 ++++++++++--
 3 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 62b0999..e54f597 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -844,6 +844,10 @@ struct src_registers {
 						&((AEP)->regs.src.bar0->CSR))
 #define src_writel(AEP, CSR, value)	writel(value, \
 						&((AEP)->regs.src.bar0->CSR))
+#if defined(writeq)
+#define	src_writeq(AEP, CSR, value)	writeq(value, \
+						&((AEP)->regs.src.bar0->CSR))
+#endif
 
 #define SRC_ODR_SHIFT		12
 #define SRC_IDR_SHIFT		9
@@ -1163,6 +1167,11 @@ struct aac_dev
 	struct fsa_dev_info	*fsa_dev;
 	struct task_struct	*thread;
 	int			cardtype;
+	/*
+	 *This lock will protect the two 32-bit
+	 *writes to the Inbound Queue
+	 */
+	spinlock_t		iq_lock;
 
 	/*
 	 *	The following is the device specific extension.
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index 45a0a04..b4b6088 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -424,6 +424,7 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev)
 	dev->management_fib_count = 0;
 	spin_lock_init(&dev->manage_lock);
 	spin_lock_init(&dev->sync_lock);
+	spin_lock_init(&dev->iq_lock);
 	dev->max_fib_size = sizeof(struct hw_fib);
 	dev->sg_tablesize = host->sg_tablesize = (dev->max_fib_size
 		- sizeof(struct aac_fibhdr)
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index eb07b3d..1409a0b 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -447,6 +447,10 @@ static int aac_src_deliver_message(struct fib *fib)
 	u32 fibsize;
 	dma_addr_t address;
 	struct aac_fib_xporthdr *pFibX;
+#if !defined(writeq)
+	unsigned long flags;
+#endif
+
 	u16 hdr_size = le16_to_cpu(fib->hw_fib_va->header.Size);
 
 	atomic_inc(&q->numpending);
@@ -511,10 +515,14 @@ static int aac_src_deliver_message(struct fib *fib)
 			return -EINVAL;
 		address |= fibsize;
 	}
-
+#if defined(writeq)
+	src_writeq(dev, MUnit.IQ_L, (u64)address);
+#else
+	spin_lock_irqsave(&fib->dev->iq_lock, flags);
 	src_writel(dev, MUnit.IQ_H, upper_32_bits(address) & 0xffffffff);
 	src_writel(dev, MUnit.IQ_L, address & 0xffffffff);
-
+	spin_unlock_irqrestore(&fib->dev->iq_lock, flags);
+#endif
 	return 0;
 }
 
-- 
1.9.3

[PATCH V3 05/10] [SCSI] aacraid: Tune response path if IsFastPath bit set

[rajinikanth.pandurangan]

From: Rajinikanth Pandurangan <rajinikanth.pandurangan@pmcs.com>

Description:
        If 'IsFastPath' bit is set, then response path assumes no error
        and skips error check.

Changes from V2:
None

Reviewed By:
 Tomas Henzl <thenzl@redhat.com>,
 Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>,
 Johannes Thumshirn <jthumshirn@suse.de>

Signed-off-by: Rajinikanth Pandurangan <rajinikanth.pandurangan@pmcs.com>
---
 drivers/scsi/aacraid/aachba.c | 259 ++++++++++++++++++++++--------------------
 1 file changed, 137 insertions(+), 122 deletions(-)

diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index fe59b00..864e9f6 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -2977,11 +2977,16 @@ static void aac_srb_callback(void *context, struct fib * fibptr)
 		return;
 
 	BUG_ON(fibptr == NULL);
-
 	dev = fibptr->dev;
 
-	srbreply = (struct aac_srb_reply *) fib_data(fibptr);
+	scsi_dma_unmap(scsicmd);
 
+	/* expose physical device if expose_physicald flag is on */
+	if (scsicmd->cmnd[0] == INQUIRY && !(scsicmd->cmnd[1] & 0x01)
+	  && expose_physicals > 0)
+		aac_expose_phy_device(scsicmd);
+
+	srbreply = (struct aac_srb_reply *) fib_data(fibptr);
 	scsicmd->sense_buffer[0] = '\0';  /* Initialize sense valid flag to false */
 
 	if (fibptr->flags & FIB_CONTEXT_FLAG_FASTRESP) {
@@ -2994,147 +2999,157 @@ static void aac_srb_callback(void *context, struct fib * fibptr)
 		 */
 		scsi_set_resid(scsicmd, scsi_bufflen(scsicmd)
 				   - le32_to_cpu(srbreply->data_xfer_length));
-	}
-
-	scsi_dma_unmap(scsicmd);
-
-	/* expose physical device if expose_physicald flag is on */
-	if (scsicmd->cmnd[0] == INQUIRY && !(scsicmd->cmnd[1] & 0x01)
-	  && expose_physicals > 0)
-		aac_expose_phy_device(scsicmd);
+		/*
+		 * First check the fib status
+		 */
 
-	/*
-	 * First check the fib status
-	 */
+		if (le32_to_cpu(srbreply->status) != ST_OK) {
+			int len;
 
-	if (le32_to_cpu(srbreply->status) != ST_OK){
-		int len;
-		printk(KERN_WARNING "aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply->status));
-		len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
-			    SCSI_SENSE_BUFFERSIZE);
-		scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
-		memcpy(scsicmd->sense_buffer, srbreply->sense_data, len);
-	}
+			printk(KERN_WARNING "aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply->status));
+			len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
+				    SCSI_SENSE_BUFFERSIZE);
+			scsicmd->result = DID_ERROR << 16
+						| COMMAND_COMPLETE << 8
+						| SAM_STAT_CHECK_CONDITION;
+			memcpy(scsicmd->sense_buffer,
+					srbreply->sense_data, len);
+		}
 
-	/*
-	 * Next check the srb status
-	 */
-	switch( (le32_to_cpu(srbreply->srb_status))&0x3f){
-	case SRB_STATUS_ERROR_RECOVERY:
-	case SRB_STATUS_PENDING:
-	case SRB_STATUS_SUCCESS:
-		scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
-		break;
-	case SRB_STATUS_DATA_OVERRUN:
-		switch(scsicmd->cmnd[0]){
-		case  READ_6:
-		case  WRITE_6:
-		case  READ_10:
-		case  WRITE_10:
-		case  READ_12:
-		case  WRITE_12:
-		case  READ_16:
-		case  WRITE_16:
-			if (le32_to_cpu(srbreply->data_xfer_length) < scsicmd->underflow) {
-				printk(KERN_WARNING"aacraid: SCSI CMD underflow\n");
-			} else {
-				printk(KERN_WARNING"aacraid: SCSI CMD Data Overrun\n");
+		/*
+		 * Next check the srb status
+		 */
+		switch ((le32_to_cpu(srbreply->srb_status))&0x3f) {
+		case SRB_STATUS_ERROR_RECOVERY:
+		case SRB_STATUS_PENDING:
+		case SRB_STATUS_SUCCESS:
+			scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+			break;
+		case SRB_STATUS_DATA_OVERRUN:
+			switch (scsicmd->cmnd[0]) {
+			case  READ_6:
+			case  WRITE_6:
+			case  READ_10:
+			case  WRITE_10:
+			case  READ_12:
+			case  WRITE_12:
+			case  READ_16:
+			case  WRITE_16:
+				if (le32_to_cpu(srbreply->data_xfer_length)
+							< scsicmd->underflow)
+					printk(KERN_WARNING"aacraid: SCSI CMD underflow\n");
+				else
+					printk(KERN_WARNING"aacraid: SCSI CMD Data Overrun\n");
+				scsicmd->result = DID_ERROR << 16
+							| COMMAND_COMPLETE << 8;
+				break;
+			case INQUIRY: {
+				scsicmd->result = DID_OK << 16
+							| COMMAND_COMPLETE << 8;
+				break;
+			}
+			default:
+				scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+				break;
 			}
-			scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8;
 			break;
-		case INQUIRY: {
-			scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+		case SRB_STATUS_ABORTED:
+			scsicmd->result = DID_ABORT << 16 | ABORT << 8;
 			break;
-		}
-		default:
-			scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+		case SRB_STATUS_ABORT_FAILED:
+			/*
+			 * Not sure about this one - but assuming the
+			 * hba was trying to abort for some reason
+			 */
+			scsicmd->result = DID_ERROR << 16 | ABORT << 8;
+			break;
+		case SRB_STATUS_PARITY_ERROR:
+			scsicmd->result = DID_PARITY << 16
+						| MSG_PARITY_ERROR << 8;
+			break;
+		case SRB_STATUS_NO_DEVICE:
+		case SRB_STATUS_INVALID_PATH_ID:
+		case SRB_STATUS_INVALID_TARGET_ID:
+		case SRB_STATUS_INVALID_LUN:
+		case SRB_STATUS_SELECTION_TIMEOUT:
+			scsicmd->result = DID_NO_CONNECT << 16
+						| COMMAND_COMPLETE << 8;
 			break;
-		}
-		break;
-	case SRB_STATUS_ABORTED:
-		scsicmd->result = DID_ABORT << 16 | ABORT << 8;
-		break;
-	case SRB_STATUS_ABORT_FAILED:
-		// Not sure about this one - but assuming the hba was trying to abort for some reason
-		scsicmd->result = DID_ERROR << 16 | ABORT << 8;
-		break;
-	case SRB_STATUS_PARITY_ERROR:
-		scsicmd->result = DID_PARITY << 16 | MSG_PARITY_ERROR << 8;
-		break;
-	case SRB_STATUS_NO_DEVICE:
-	case SRB_STATUS_INVALID_PATH_ID:
-	case SRB_STATUS_INVALID_TARGET_ID:
-	case SRB_STATUS_INVALID_LUN:
-	case SRB_STATUS_SELECTION_TIMEOUT:
-		scsicmd->result = DID_NO_CONNECT << 16 | COMMAND_COMPLETE << 8;
-		break;
 
-	case SRB_STATUS_COMMAND_TIMEOUT:
-	case SRB_STATUS_TIMEOUT:
-		scsicmd->result = DID_TIME_OUT << 16 | COMMAND_COMPLETE << 8;
-		break;
+		case SRB_STATUS_COMMAND_TIMEOUT:
+		case SRB_STATUS_TIMEOUT:
+			scsicmd->result = DID_TIME_OUT << 16
+						| COMMAND_COMPLETE << 8;
+			break;
 
-	case SRB_STATUS_BUSY:
-		scsicmd->result = DID_BUS_BUSY << 16 | COMMAND_COMPLETE << 8;
-		break;
+		case SRB_STATUS_BUSY:
+			scsicmd->result = DID_BUS_BUSY << 16
+						| COMMAND_COMPLETE << 8;
+			break;
 
-	case SRB_STATUS_BUS_RESET:
-		scsicmd->result = DID_RESET << 16 | COMMAND_COMPLETE << 8;
-		break;
+		case SRB_STATUS_BUS_RESET:
+			scsicmd->result = DID_RESET << 16
+						| COMMAND_COMPLETE << 8;
+			break;
 
-	case SRB_STATUS_MESSAGE_REJECTED:
-		scsicmd->result = DID_ERROR << 16 | MESSAGE_REJECT << 8;
-		break;
-	case SRB_STATUS_REQUEST_FLUSHED:
-	case SRB_STATUS_ERROR:
-	case SRB_STATUS_INVALID_REQUEST:
-	case SRB_STATUS_REQUEST_SENSE_FAILED:
-	case SRB_STATUS_NO_HBA:
-	case SRB_STATUS_UNEXPECTED_BUS_FREE:
-	case SRB_STATUS_PHASE_SEQUENCE_FAILURE:
-	case SRB_STATUS_BAD_SRB_BLOCK_LENGTH:
-	case SRB_STATUS_DELAYED_RETRY:
-	case SRB_STATUS_BAD_FUNCTION:
-	case SRB_STATUS_NOT_STARTED:
-	case SRB_STATUS_NOT_IN_USE:
-	case SRB_STATUS_FORCE_ABORT:
-	case SRB_STATUS_DOMAIN_VALIDATION_FAIL:
-	default:
+		case SRB_STATUS_MESSAGE_REJECTED:
+			scsicmd->result = DID_ERROR << 16
+						| MESSAGE_REJECT << 8;
+			break;
+		case SRB_STATUS_REQUEST_FLUSHED:
+		case SRB_STATUS_ERROR:
+		case SRB_STATUS_INVALID_REQUEST:
+		case SRB_STATUS_REQUEST_SENSE_FAILED:
+		case SRB_STATUS_NO_HBA:
+		case SRB_STATUS_UNEXPECTED_BUS_FREE:
+		case SRB_STATUS_PHASE_SEQUENCE_FAILURE:
+		case SRB_STATUS_BAD_SRB_BLOCK_LENGTH:
+		case SRB_STATUS_DELAYED_RETRY:
+		case SRB_STATUS_BAD_FUNCTION:
+		case SRB_STATUS_NOT_STARTED:
+		case SRB_STATUS_NOT_IN_USE:
+		case SRB_STATUS_FORCE_ABORT:
+		case SRB_STATUS_DOMAIN_VALIDATION_FAIL:
+		default:
 #ifdef AAC_DETAILED_STATUS_INFO
-		printk("aacraid: SRB ERROR(%u) %s scsi cmd 0x%x - scsi status 0x%x\n",
-			le32_to_cpu(srbreply->srb_status) & 0x3F,
-			aac_get_status_string(
-				le32_to_cpu(srbreply->srb_status) & 0x3F),
-			scsicmd->cmnd[0],
-			le32_to_cpu(srbreply->scsi_status));
+			printk(KERN_INFO "aacraid: SRB ERROR(%u) %s scsi cmd 0x%x - scsi status 0x%x\n",
+				le32_to_cpu(srbreply->srb_status) & 0x3F,
+				aac_get_status_string(
+					le32_to_cpu(srbreply->srb_status) & 0x3F),
+				scsicmd->cmnd[0],
+				le32_to_cpu(srbreply->scsi_status));
 #endif
-		if ((scsicmd->cmnd[0] == ATA_12)
-		  || (scsicmd->cmnd[0] == ATA_16)) {
-			if (scsicmd->cmnd[2] & (0x01 << 5)) {
-				scsicmd->result = DID_OK << 16
-						| COMMAND_COMPLETE << 8;
+			if ((scsicmd->cmnd[0] == ATA_12)
+				|| (scsicmd->cmnd[0] == ATA_16)) {
+					if (scsicmd->cmnd[2] & (0x01 << 5)) {
+						scsicmd->result = DID_OK << 16
+							| COMMAND_COMPLETE << 8;
 				break;
+				} else {
+					scsicmd->result = DID_ERROR << 16
+						| COMMAND_COMPLETE << 8;
+					break;
+				}
 			} else {
 				scsicmd->result = DID_ERROR << 16
-						| COMMAND_COMPLETE << 8;
+					| COMMAND_COMPLETE << 8;
 				break;
 			}
-		} else {
-			scsicmd->result = DID_ERROR << 16
-					| COMMAND_COMPLETE << 8;
-			break;
 		}
-	}
-	if (le32_to_cpu(srbreply->scsi_status) == SAM_STAT_CHECK_CONDITION) {
-		int len;
-		scsicmd->result |= SAM_STAT_CHECK_CONDITION;
-		len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
-			    SCSI_SENSE_BUFFERSIZE);
+		if (le32_to_cpu(srbreply->scsi_status)
+				== SAM_STAT_CHECK_CONDITION) {
+			int len;
+
+			scsicmd->result |= SAM_STAT_CHECK_CONDITION;
+			len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
+				    SCSI_SENSE_BUFFERSIZE);
 #ifdef AAC_DETAILED_STATUS_INFO
-		printk(KERN_WARNING "aac_srb_callback: check condition, status = %d len=%d\n",
-					le32_to_cpu(srbreply->status), len);
+			printk(KERN_WARNING "aac_srb_callback: check condition, status = %d len=%d\n",
+						le32_to_cpu(srbreply->status), len);
 #endif
-		memcpy(scsicmd->sense_buffer, srbreply->sense_data, len);
+			memcpy(scsicmd->sense_buffer,
+					srbreply->sense_data, len);
+		}
 	}
 	/*
 	 * OR in the scsi status (already shifted up a bit)
-- 
1.9.3

[PATCH V3 06/10] [SCSI] aacraid: Reset irq affinity hints before releasing irq

[rajinikanth.pandurangan]

From: Rajinikanth Pandurangan <rajinikanth.pandurangan@pmcs.com>

Description:
        Reset irq affinity hints before releasing IRQ
        Removed duplicate code of IRQ acquire/release

Changes from V2:
None

Reviewed by:
 Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>,
 Johannes Thumshirn <jthumshirn@suse.de>

Signed-off-by: Rajinikanth Pandurangan <rajinikanth.pandurangan@pmcs.com>
---
 drivers/scsi/aacraid/aacraid.h |   2 +
 drivers/scsi/aacraid/commsup.c | 113 ++++++++++++++++++++++++++++++-----------
 drivers/scsi/aacraid/src.c     |  48 ++---------------
 3 files changed, 88 insertions(+), 75 deletions(-)

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index e54f597..7b95227 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -2110,6 +2110,8 @@ static inline unsigned int cap_to_cyls(sector_t capacity, unsigned divisor)
 #define AAC_OWNER_ERROR_HANDLER	0x103
 #define AAC_OWNER_FIRMWARE	0x106
 
+int aac_acquire_irq(struct aac_dev *dev);
+void aac_free_irq(struct aac_dev *dev);
 const char *aac_driverinfo(struct Scsi_Host *);
 struct fib *aac_fib_alloc(struct aac_dev *dev);
 int aac_fib_setup(struct aac_dev *dev);
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index 4da5749..a1f90fe 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -1270,13 +1270,12 @@ retry_next:
 static int _aac_reset_adapter(struct aac_dev *aac, int forced)
 {
 	int index, quirks;
-	int retval, i;
+	int retval;
 	struct Scsi_Host *host;
 	struct scsi_device *dev;
 	struct scsi_cmnd *command;
 	struct scsi_cmnd *command_list;
 	int jafo = 0;
-	int cpu;
 
 	/*
 	 * Assumptions:
@@ -1339,35 +1338,7 @@ static int _aac_reset_adapter(struct aac_dev *aac, int forced)
 	aac->comm_phys = 0;
 	kfree(aac->queues);
 	aac->queues = NULL;
-	cpu = cpumask_first(cpu_online_mask);
-	if (aac->pdev->device == PMC_DEVICE_S6 ||
-	    aac->pdev->device == PMC_DEVICE_S7 ||
-	    aac->pdev->device == PMC_DEVICE_S8 ||
-	    aac->pdev->device == PMC_DEVICE_S9) {
-		if (aac->max_msix > 1) {
-			for (i = 0; i < aac->max_msix; i++) {
-				if (irq_set_affinity_hint(
-				    aac->msixentry[i].vector,
-				    NULL)) {
-					printk(KERN_ERR "%s%d: Failed to reset IRQ affinity for cpu %d\n",
-						aac->name,
-						aac->id,
-						cpu);
-				}
-				cpu = cpumask_next(cpu,
-						cpu_online_mask);
-				free_irq(aac->msixentry[i].vector,
-					 &(aac->aac_msix[i]));
-			}
-			pci_disable_msix(aac->pdev);
-		} else {
-			free_irq(aac->pdev->irq, &(aac->aac_msix[0]));
-		}
-	} else {
-		free_irq(aac->pdev->irq, aac);
-	}
-	if (aac->msi)
-		pci_disable_msi(aac->pdev);
+	aac_free_irq(aac);
 	kfree(aac->fsa_dev);
 	aac->fsa_dev = NULL;
 	quirks = aac_get_driver_ident(index)->quirks;
@@ -1978,3 +1949,83 @@ int aac_command_thread(void *data)
 	dev->aif_thread = 0;
 	return 0;
 }
+
+int aac_acquire_irq(struct aac_dev *dev)
+{
+	int i;
+	int j;
+	int ret = 0;
+	int cpu;
+
+	cpu = cpumask_first(cpu_online_mask);
+	if (!dev->sync_mode && dev->msi_enabled && dev->max_msix > 1) {
+		for (i = 0; i < dev->max_msix; i++) {
+			dev->aac_msix[i].vector_no = i;
+			dev->aac_msix[i].dev = dev;
+			if (request_irq(dev->msixentry[i].vector,
+					dev->a_ops.adapter_intr,
+					0, "aacraid", &(dev->aac_msix[i]))) {
+				printk(KERN_ERR "%s%d: Failed to register IRQ for vector %d.\n",
+						dev->name, dev->id, i);
+				for (j = 0 ; j < i ; j++)
+					free_irq(dev->msixentry[j].vector,
+						 &(dev->aac_msix[j]));
+				pci_disable_msix(dev->pdev);
+				ret = -1;
+			}
+			if (irq_set_affinity_hint(dev->msixentry[i].vector,
+							get_cpu_mask(cpu))) {
+				printk(KERN_ERR "%s%d: Failed to set IRQ affinity for cpu %d\n",
+					    dev->name, dev->id, cpu);
+			}
+			cpu = cpumask_next(cpu, cpu_online_mask);
+		}
+	} else {
+		dev->aac_msix[0].vector_no = 0;
+		dev->aac_msix[0].dev = dev;
+
+		if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
+			IRQF_SHARED, "aacraid",
+			&(dev->aac_msix[0])) < 0) {
+			if (dev->msi)
+				pci_disable_msi(dev->pdev);
+			printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
+					dev->name, dev->id);
+			ret = -1;
+		}
+	}
+	return ret;
+}
+
+void aac_free_irq(struct aac_dev *dev)
+{
+	int i;
+	int cpu;
+
+	cpu = cpumask_first(cpu_online_mask);
+	if (dev->pdev->device == PMC_DEVICE_S6 ||
+	    dev->pdev->device == PMC_DEVICE_S7 ||
+	    dev->pdev->device == PMC_DEVICE_S8 ||
+	    dev->pdev->device == PMC_DEVICE_S9) {
+		if (dev->max_msix > 1) {
+			for (i = 0; i < dev->max_msix; i++) {
+				if (irq_set_affinity_hint(
+					dev->msixentry[i].vector, NULL)) {
+					printk(KERN_ERR "%s%d: Failed to reset IRQ affinity for cpu %d\n",
+					    dev->name, dev->id, cpu);
+				}
+				cpu = cpumask_next(cpu, cpu_online_mask);
+				free_irq(dev->msixentry[i].vector,
+						&(dev->aac_msix[i]));
+			}
+		} else {
+			free_irq(dev->pdev->irq, &(dev->aac_msix[0]));
+		}
+	} else {
+		free_irq(dev->pdev->irq, dev);
+	}
+	if (dev->msi)
+		pci_disable_msi(dev->pdev);
+	else if (dev->max_msix > 1)
+		pci_disable_msix(dev->pdev);
+}
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index 1409a0b..2aa34ea 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -798,9 +798,7 @@ int aac_srcv_init(struct aac_dev *dev)
 	unsigned long status;
 	int restart = 0;
 	int instance = dev->id;
-	int i, j;
 	const char *name = dev->name;
-	int cpu;
 
 	dev->a_ops.adapter_ioremap = aac_srcv_ioremap;
 	dev->a_ops.adapter_comm = aac_src_select_comm;
@@ -918,48 +916,10 @@ int aac_srcv_init(struct aac_dev *dev)
 		goto error_iounmap;
 	if (dev->msi_enabled)
 		aac_src_access_devreg(dev, AAC_ENABLE_MSIX);
-	if (!dev->sync_mode && dev->msi_enabled && dev->max_msix > 1) {
-		cpu = cpumask_first(cpu_online_mask);
-		for (i = 0; i < dev->max_msix; i++) {
-			dev->aac_msix[i].vector_no = i;
-			dev->aac_msix[i].dev = dev;
-
-			if (request_irq(dev->msixentry[i].vector,
-					dev->a_ops.adapter_intr,
-					0,
-					"aacraid",
-					&(dev->aac_msix[i]))) {
-				printk(KERN_ERR "%s%d: Failed to register IRQ for vector %d.\n",
-						name, instance, i);
-				for (j = 0 ; j < i ; j++)
-					free_irq(dev->msixentry[j].vector,
-						 &(dev->aac_msix[j]));
-				pci_disable_msix(dev->pdev);
-				goto error_iounmap;
-			}
-			if (irq_set_affinity_hint(
-			   dev->msixentry[i].vector,
-			   get_cpu_mask(cpu))) {
-				printk(KERN_ERR "%s%d: Failed to set IRQ affinity for cpu %d\n",
-						name, instance, cpu);
-			}
-			cpu = cpumask_next(cpu, cpu_online_mask);
-		}
-	} else {
-		dev->aac_msix[0].vector_no = 0;
-		dev->aac_msix[0].dev = dev;
-
-		if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
-				IRQF_SHARED,
-				"aacraid",
-				&(dev->aac_msix[0])) < 0) {
-			if (dev->msi)
-				pci_disable_msi(dev->pdev);
-			printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
-					name, instance);
-			goto error_iounmap;
-		}
-	}
+
+	if (aac_acquire_irq(dev))
+		goto error_iounmap;
+
 	dev->dbg_base = dev->base_start;
 	dev->dbg_base_mapped = dev->base;
 	dev->dbg_size = dev->base_size;
-- 
1.9.3

[PATCH V3 07/10] [SCSI] aacraid: Unblock IOCTLs to controller once system resumed from suspend

[rajinikanth.pandurangan]

From: Rajinikanth Pandurangan <rajinikanth.pandurangan@pmcs.com>

Description:
        Driver blocks ioctls once it received shutdown/suspend request during
        suspend/hybernation. This patch unblocks ioctls on resume path.

Changes from V2:
None

Reviewed by:
 Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>,
 Johannes Thumshirn <jthumshirn@suse.de>

Signed-off-by: Rajinikanth Pandurangan <rajinikanth.pandurangan@pmcs.com>
---
 drivers/scsi/aacraid/linit.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 37375cf..3b6e5c6 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1448,6 +1448,11 @@ static int aac_resume(struct pci_dev *pdev)
 	pci_set_master(pdev);
 	if (aac_acquire_resources(aac))
 		goto fail_device;
+	/*
+	* reset this flag to unblock ioctl() as it was set at
+	* aac_send_shutdown() to block ioctls from upperlayer
+	*/
+	aac->adapter_shutdown = 0;
 	scsi_unblock_requests(shost);
 
 	return 0;
-- 
1.9.3

[PATCH V3 08/10] [SCSI] aacraid: Send commit-config to controller firmware

[rajinikanth.pandurangan]

From: Rajinikanth Pandurangan <rajinikanth.pandurangan@pmcs.com>

Description:
        Controller BIOS/UEFI driver used to send this request.  But for
        IBM-Power system there is no BIOS/UEFI driver.  So this change is
        required for IBM, otherwise controller will be read-only mode.

Changes from V2:
None

Reviewed by:
 Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>,
 Johannes Thumshirn <jthumshirn@suse.de>

Signed-off-by: Rajinikanth Pandurangan <rajinikanth.pandurangan@pmcs.com>
---
 drivers/scsi/aacraid/linit.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 3b6e5c6..35dd849 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1270,8 +1270,11 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		shost->max_channel = aac->maximum_num_channels;
 	else
 		shost->max_channel = 0;
-
+#if defined(__powerpc__) || defined(__PPC__) || defined(__ppc__)
+	aac_get_config_status(aac, 1);
+#else
 	aac_get_config_status(aac, 0);
+#endif
 	aac_get_containers(aac);
 	list_add(&aac->entry, insert);
 
-- 
1.9.3

[PATCH V3 09/10] [SCSI] aacraid: Update driver version

[rajinikanth.pandurangan]

From: Rajinikanth Pandurangan <rajinikanth.pandurangan@pmcs.com>

Signed-off-by: Rajinikanth Pandurangan <rajinikanth.pandurangan@pmcs.com>
---
 drivers/scsi/aacraid/aacraid.h | 2 +-
 drivers/scsi/aacraid/linit.c   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 7b95227..73c3384 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -62,7 +62,7 @@ enum {
 #define	PMC_GLOBAL_INT_BIT0		0x00000001
 
 #ifndef AAC_DRIVER_BUILD
-# define AAC_DRIVER_BUILD 40709
+# define AAC_DRIVER_BUILD 41010
 # define AAC_DRIVER_BRANCH "-ms"
 #endif
 #define MAXIMUM_NUM_CONTAINERS	32
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 35dd849..3fabfa1 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -56,7 +56,7 @@
 
 #include "aacraid.h"
 
-#define AAC_DRIVER_VERSION		"1.2-1"
+#define AAC_DRIVER_VERSION		"1.2-2"
 #ifndef AAC_DRIVER_BRANCH
 #define AAC_DRIVER_BRANCH		""
 #endif
-- 
1.9.3

[PATCH V3 10/10] [SCSI] aacraid: Replace pci_enable_msix() with pci_enable_msix_exact()

[rajinikanth.pandurangan]

From: Rajinikanth Pandurangan <rajinikanth.pandurangan@pmcs.com>

Description:
	As pci_enable_msix() deprecated, replaced with pci_enable_msix_exact()

Changes from V2:
 Newly created for V3 based on review comment.

Signed-off-by: Rajinikanth Pandurangan <rajinikanth.pandurangan@pmcs.com>
---
 drivers/scsi/aacraid/comminit.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index b4b6088..e4ff47e 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -366,7 +366,7 @@ void aac_define_int_mode(struct aac_dev *dev)
 
 	if (msi_count > 1 &&
 	    pci_find_capability(dev->pdev, PCI_CAP_ID_MSIX)) {
-		i = pci_enable_msix(dev->pdev,
+		i = pci_enable_msix_exact(dev->pdev,
 				    dev->msixentry,
 				    msi_count);
 		 /* Check how many MSIX vectors are allocated */
@@ -374,7 +374,7 @@ void aac_define_int_mode(struct aac_dev *dev)
 			dev->msi_enabled = 1;
 			if (i) {
 				msi_count = i;
-				if (pci_enable_msix(dev->pdev,
+				if (pci_enable_msix_exact(dev->pdev,
 				    dev->msixentry,
 				    msi_count)) {
 					dev->msi_enabled = 0;
-- 
1.9.3

RE: [PATCH V3 00/10] [SCSI] aacraid: Patchset for aacraid driver version 41010

[Rajinikanth Pandurangan]

Hi James & reviewers,

This V3 addressed of all review comments made for  V2 patchset.

V1 & V2 was reviewed & commented by you, Tomas Henzl <thenzl@redhat.com>, Johannes Thumshirn <jthumshirn@suse.de>, Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>

Please let me know the status of this patchset.

Thanks,
Raj P.  

-----Original Message-----
From: Rajinikanth Pandurangan 
Sent: Tuesday, July 07, 2015 4:16 PM
To: jbottomley@parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Mahesh Rajashekhara; Rich Bono; Achim Leubner; Murthy Bhat; Rajinikanth Pandurangan
Subject: [PATCH V3 00/10] [SCSI] aacraid: Patchset for aacraid driver version 41010

From: Rajinikanth Pandurangan <rajinikanth.pandurangan@pmcs.com>

This patchset includes the following changes (bug fixes and new feature support) specific to aacraid driver.

V3:
Increased msleep() time from 1 to 20.
Created new patch for pci_enable_msix() replacement.
Changed subject/description of patch 03.


Rajinikanth Pandurangan (10):
  [SCSI] aacraid: Fix for logical device name and UID not exposed to the OS
  [SCSI] aacraid: Add Power Management support
  [SCSI] aacraid: Change interrupt mode to MSI for series-6 controller
  [SCSI] aacraid: Enable 64-bit write to controller register
  [SCSI] aacraid: Tune response path if IsFastPath bit set
  [SCSI] aacraid: Reset irq affinity hints before releasing irq
  [SCSI] aacraid: Unblock IOCTLs to controller once system resumed from suspend
  [SCSI] aacraid: Send commit-config to controller firmware
  [SCSI] aacraid: Update driver version
  [SCSI] aacraid: Replace pci_enable_msix() with pci_enable_msix_exact()

 drivers/scsi/aacraid/aachba.c   | 263 +++++++++++++++++++++-------------------
 drivers/scsi/aacraid/aacraid.h  |  18 ++-  drivers/scsi/aacraid/comminit.c | 155 ++++++++++++-----------  drivers/scsi/aacraid/commsup.c  | 113 ++++++++++++-----
 drivers/scsi/aacraid/linit.c    | 159 +++++++++++++++++++++++-
 drivers/scsi/aacraid/rx.c       |   1 +
 drivers/scsi/aacraid/sa.c       |   1 +
 drivers/scsi/aacraid/src.c      |  64 +++-------
 8 files changed, 491 insertions(+), 283 deletions(-)

--
1.9.3

Re: [PATCH V3 10/10] [SCSI] aacraid: Replace pci_enable_msix() with pci_enable_msix_exact()

[Tomas Henzl]

On 8.7.2015 01:16, rajinikanth.pandurangan@pmcs.com wrote:
> From: Rajinikanth Pandurangan <rajinikanth.pandurangan@pmcs.com>
> 
> Description:
> 	As pci_enable_msix() deprecated, replaced with pci_enable_msix_exact()
> 
> Changes from V2:
>  Newly created for V3 based on review comment.
> 
> Signed-off-by: Rajinikanth Pandurangan <rajinikanth.pandurangan@pmcs.com>
> ---
>  drivers/scsi/aacraid/comminit.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

> 
> diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
> index b4b6088..e4ff47e 100644
> --- a/drivers/scsi/aacraid/comminit.c
> +++ b/drivers/scsi/aacraid/comminit.c
> @@ -366,7 +366,7 @@ void aac_define_int_mode(struct aac_dev *dev)
>  
>  	if (msi_count > 1 &&
>  	    pci_find_capability(dev->pdev, PCI_CAP_ID_MSIX)) {
> -		i = pci_enable_msix(dev->pdev,
> +		i = pci_enable_msix_exact(dev->pdev,
>  				    dev->msixentry,
>  				    msi_count);
>  		 /* Check how many MSIX vectors are allocated */
> @@ -374,7 +374,7 @@ void aac_define_int_mode(struct aac_dev *dev)
>  			dev->msi_enabled = 1;
>  			if (i) {
Hi Rajinikanth,
the pci_enable_msix_exact is not a 1;1 replacement for pci_enable_msix,
you shouldn't use it this way - it never returns a positive value.
What you probably want is to use pci_enable_msix_range

Cheers,
Tomas

>  				msi_count = i;
> -				if (pci_enable_msix(dev->pdev,
> +				if (pci_enable_msix_exact(dev->pdev,
>  				    dev->msixentry,
>  				    msi_count)) {
>  					dev->msi_enabled = 0;
> 

RE: [PATCH V3 10/10] [SCSI] aacraid: Replace pci_enable_msix() with pci_enable_msix_exact()

[Rajinikanth Pandurangan]

Thanks for the comment Tomas.  I'll submit another patch with range.


-----Original Message-----
From: Tomas Henzl [mailto:thenzl@redhat.com] 
Sent: Monday, July 20, 2015 8:54 AM
To: Rajinikanth Pandurangan; jbottomley@parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Mahesh Rajashekhara; Rich Bono; Achim Leubner; Murthy Bhat
Subject: Re: [PATCH V3 10/10] [SCSI] aacraid: Replace pci_enable_msix() with pci_enable_msix_exact()

On 8.7.2015 01:16, rajinikanth.pandurangan@pmcs.com wrote:
> From: Rajinikanth Pandurangan <rajinikanth.pandurangan@pmcs.com>
> 
> Description:
> 	As pci_enable_msix() deprecated, replaced with 
> pci_enable_msix_exact()
> 
> Changes from V2:
>  Newly created for V3 based on review comment.
> 
> Signed-off-by: Rajinikanth Pandurangan 
> <rajinikanth.pandurangan@pmcs.com>
> ---
>  drivers/scsi/aacraid/comminit.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

> 
> diff --git a/drivers/scsi/aacraid/comminit.c 
> b/drivers/scsi/aacraid/comminit.c index b4b6088..e4ff47e 100644
> --- a/drivers/scsi/aacraid/comminit.c
> +++ b/drivers/scsi/aacraid/comminit.c
> @@ -366,7 +366,7 @@ void aac_define_int_mode(struct aac_dev *dev)
>  
>  	if (msi_count > 1 &&
>  	    pci_find_capability(dev->pdev, PCI_CAP_ID_MSIX)) {
> -		i = pci_enable_msix(dev->pdev,
> +		i = pci_enable_msix_exact(dev->pdev,
>  				    dev->msixentry,
>  				    msi_count);
>  		 /* Check how many MSIX vectors are allocated */ @@ -374,7 +374,7 
> @@ void aac_define_int_mode(struct aac_dev *dev)
>  			dev->msi_enabled = 1;
>  			if (i) {
Hi Rajinikanth,
the pci_enable_msix_exact is not a 1;1 replacement for pci_enable_msix, you shouldn't use it this way - it never returns a positive value.
What you probably want is to use pci_enable_msix_range

Cheers,
Tomas

>  				msi_count = i;
> -				if (pci_enable_msix(dev->pdev,
> +				if (pci_enable_msix_exact(dev->pdev,
>  				    dev->msixentry,
>  				    msi_count)) {
>  					dev->msi_enabled = 0;
>