[PATCH 2/2] drivers: usb: fsl: Define usb control register mask for w1c bits

[PATCH 2/2] drivers: usb: fsl: Define usb control register mask for w1c bits

[Nikhil Badola]

Define and use CONTROL_REGISTER_W1C_MASK to make sure that
w1c bits of usb control register do not get reset while
writing any other bit

Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
---
 drivers/usb/host/ehci-fsl.c | 25 ++++++++++++++++---------
 drivers/usb/host/ehci-fsl.h |  1 +
 2 files changed, 17 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 05ebe3d..202dafb 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -127,14 +127,16 @@ static int fsl_ehci_drv_probe(struct platform_device *pdev)
 
 	/* Enable USB controller, 83xx or 8536 */
 	if (pdata->have_sysif_regs && pdata->controller_ver < FSL_USB_VER_1_6)
-		setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4);
+		clrsetbits_be32(hcd->regs + FSL_SOC_USB_CTRL,
+				CONTROL_REGISTER_W1C_MASK, 0x4);
 
 	/*
 	 * Enable UTMI phy and program PTS field in UTMI mode before asserting
 	 * controller reset for USB Controller version 2.5
 	 */
 	if (pdata->has_fsl_erratum_a007792) {
-		writel_be(CTRL_UTMI_PHY_EN, hcd->regs + FSL_SOC_USB_CTRL);
+		clrsetbits_be32(hcd->regs + FSL_SOC_USB_CTRL,
+				CONTROL_REGISTER_W1C_MASK, CTRL_UTMI_PHY_EN);
 		writel(PORT_PTS_UTMI, hcd->regs + FSL_SOC_USB_PORTSC1);
 	}
 
@@ -200,9 +202,11 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
 	case FSL_USB2_PHY_ULPI:
 		if (pdata->have_sysif_regs && pdata->controller_ver) {
 			/* controller version 1.6 or above */
-			clrbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN);
-			setbits32(non_ehci + FSL_SOC_USB_CTRL,
-				ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN);
+			clrbits32(non_ehci + FSL_SOC_USB_CTRL,
+				  CONTROL_REGISTER_W1C_MASK | UTMI_PHY_EN);
+			clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
+					CONTROL_REGISTER_W1C_MASK,
+					ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN);
 		}
 		portsc |= PORT_PTS_ULPI;
 		break;
@@ -216,14 +220,16 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
 	case FSL_USB2_PHY_UTMI_DUAL:
 		if (pdata->have_sysif_regs && pdata->controller_ver) {
 			/* controller version 1.6 or above */
-			setbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN);
+			clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
+					CONTROL_REGISTER_W1C_MASK, UTMI_PHY_EN);
 			mdelay(FSL_UTMI_PHY_DLY);  /* Delay for UTMI PHY CLK to
 						become stable - 10ms*/
 		}
 		/* enable UTMI PHY */
 		if (pdata->have_sysif_regs)
-			setbits32(non_ehci + FSL_SOC_USB_CTRL,
-				  CTRL_UTMI_PHY_EN);
+			clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
+					CONTROL_REGISTER_W1C_MASK,
+					CTRL_UTMI_PHY_EN);
 		portsc |= PORT_PTS_UTMI;
 		break;
 	case FSL_USB2_PHY_NONE:
@@ -245,7 +251,8 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
 	ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
 
 	if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs)
-		setbits32(non_ehci + FSL_SOC_USB_CTRL, USB_CTRL_USB_EN);
+		clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
+				CONTROL_REGISTER_W1C_MASK, USB_CTRL_USB_EN);
 
 	return 0;
 }
diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h
index dbd292e..1a8a60a 100644
--- a/drivers/usb/host/ehci-fsl.h
+++ b/drivers/usb/host/ehci-fsl.h
@@ -52,6 +52,7 @@
 #define SNOOP_SIZE_2GB		0x1e
 
 /* control Register Bit Masks */
+#define CONTROL_REGISTER_W1C_MASK       0x00020000  /* W1C: PHY_CLK_VALID */
 #define ULPI_INT_EN             (1<<0)
 #define WU_INT_EN               (1<<1)
 #define USB_CTRL_USB_EN         (1<<2)
-- 
2.1.0