* [PATCH v2 2/3] cxlflash: Superpipe support
@ 2015-07-16 23:26 Matthew R. Ochs
0 siblings, 0 replies; only message in thread
From: Matthew R. Ochs @ 2015-07-16 23:26 UTC (permalink / raw)
To: linux-scsi, James.Bottomley, nab, brking
Cc: hch, mikey, imunsie, dja, Manoj N. Kumar
Add superpipe supporting infrastructure to device driver for the IBM CXL
Flash adapter. This patch allows userspace applications to take advantage
of the accelerated I/O features that this adapter provides and bypass the
traditional filesystem stack.
Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Manoj N. Kumar <manoj@linux.vnet.ibm.com>
---
Documentation/powerpc/cxlflash.txt | 298 ++++++
drivers/scsi/cxlflash/Makefile | 2 +-
drivers/scsi/cxlflash/common.h | 17 +
drivers/scsi/cxlflash/main.c | 23 +-
drivers/scsi/cxlflash/superpipe.c | 2076 ++++++++++++++++++++++++++++++++++++
drivers/scsi/cxlflash/superpipe.h | 142 +++
include/uapi/scsi/Kbuild | 1 +
include/uapi/scsi/cxlflash_ioctl.h | 132 +++
8 files changed, 2689 insertions(+), 2 deletions(-)
create mode 100644 Documentation/powerpc/cxlflash.txt
create mode 100644 drivers/scsi/cxlflash/superpipe.c
create mode 100644 drivers/scsi/cxlflash/superpipe.h
create mode 100644 include/uapi/scsi/cxlflash_ioctl.h
diff --git a/Documentation/powerpc/cxlflash.txt b/Documentation/powerpc/cxlflash.txt
new file mode 100644
index 0000000..c4d3849
--- /dev/null
+++ b/Documentation/powerpc/cxlflash.txt
@@ -0,0 +1,298 @@
+Introduction
+============
+
+ The IBM Power architecture provides support for CAPI (Coherent
+ Accelerator Power Interface), which is available to certain PCIe slots
+ on Power 8 systems. CAPI can be thought of as a special tunneling
+ protocol through PCIe that allow PCIe adapters to look like special
+ purpose co-processors which can read or write an application's
+ memory and generate page faults. As a result, the host interface to
+ an adapter running in CAPI mode does not require the data buffers to
+ be mapped to the device's memory (IOMMU bypass) nor does it require
+ memory to be pinned.
+
+ On Linux, Coherent Accelerator (CXL) kernel services present CAPI
+ devices as a PCI device by implementing a virtual PCI host bridge.
+ This abstraction simplifies the infrastructure and programming
+ model, allowing for drivers to look similar to other native PCI
+ device drivers.
+
+ CXL provides a mechanism by which user space applications can
+ directly talk to a device (network or storage) bypassing the typical
+ kernel/device driver stack. The CXL Flash Adapter Driver enables a
+ user space application direct access to Flash storage.
+
+ The CXL Flash Adapter Driver is a kernel module that sits in the
+ SCSI stack as a low level device driver (below the SCSI disk and
+ protocol drivers) for the IBM CXL Flash Adapter. This driver is
+ responsible for the initialization of the adapter, setting up the
+ special path for user space access, and performing error recovery. It
+ communicates directly the Flash Accelerator Functional Unit (AFU)
+ as described in Documentation/powerpc/cxl.txt.
+
+ The cxlflash driver supports two, mutually exclusive, modes of
+ operation at the device (LUN) level:
+
+ - Any flash device (LUN) can be configured to be accessed as a
+ regular disk device (i.e.: /dev/sdc). This is the default mode.
+
+ - Any flash device (LUN) can be configured to be accessed from
+ user space with a special block library. This mode further
+ specifies the means of accessing the device and provides for
+ either raw access to the entire LUN (referred to as direct
+ or physical LUN access) or access to a kernel/AFU-mediated
+ partition of the LUN (referred to as virtual LUN access). The
+ segmentation of a disk device into virtual LUNs is assisted
+ by special translation services provided by the Flash AFU.
+
+Overview
+========
+
+ The Coherent Accelerator Interface Architecture (CAIA) introduces a
+ concept of a master context. A master typically has special privileges
+ granted to it by the kernel or hypervisor allowing it to perform AFU
+ wide management and control. The master may or may not be involved
+ directly in each user I/O, but at the minimum is involved in the
+ initial setup before the user application is allowed to send requests
+ directly to the AFU.
+
+ The CXL Flash Adapter Driver establishes a master context with the
+ AFU. It uses memory mapped I/O (MMIO) for this control and setup. The
+ Adapter Problem Space Memory Map looks like this:
+
+ +-------------------------------+
+ | 512 * 64 KB User MMIO |
+ | (per context) |
+ | User Accessible |
+ +-------------------------------+
+ | 512 * 128 B per context |
+ | Provisioning and Control |
+ | Trusted Process accessible |
+ +-------------------------------+
+ | 64 KB Global |
+ | Trusted Process accessible |
+ +-------------------------------+
+
+ This driver configures itself into the SCSI software stack as an
+ adapter driver. The driver is the only entity that is considered a
+ Trusted Process to program the Provisioning and Control and Global
+ areas in the MMIO Space shown above. The master context driver
+ discovers all LUNs attached to the CXL Flash adapter and instantiates
+ scsi block devices (/dev/sdb, /dev/sdc etc.) for each unique LUN
+ seen from each path.
+
+ Once these scsi block devices are instantiated, an application
+ written to a specification provided by the block library may get
+ access to the Flash from user space (without requiring a system call).
+
+ This master context driver also provides a series of ioctls for this
+ block library to enable this user space access. The driver supports
+ two modes for accessing the block device.
+
+ The first mode is called a virtual mode. In this mode a single scsi
+ block device (/dev/sdb) may be carved up into any number of distinct
+ virtual LUNs. The virtual LUNs may be resized as long as the sum of
+ the sizes of all the virtual LUNs, along with the meta-data associated
+ with it does not exceed the physical capacity.
+
+ The second mode is called the physical mode. In this mode a single
+ block device (/dev/sdb) may be opened directly by the block library
+ and the entire space for the LUN is available to the application.
+
+ Only the physical mode provides persistence of the data. i.e. The
+ data written to the block device will survive application exit and
+ restart and also reboot. The virtual LUNs do not persist (i.e. do
+ not survive after the application terminates or the system reboots).
+
+
+Block library API
+=================
+
+ Applications intending to get access to the CXL Flash from user
+ space should use the block library, as it abstracts the details of
+ interfacing directly with the cxlflash driver that are necessary for
+ performing administrative actions (i.e.: setup, tear down, resize).
+ The block library can be thought of as a 'user' of services,
+ implemented as IOCTLs, that are provided by the cxlflash driver
+ specifically for devices (LUNs) operating in user space access
+ mode. While it is not a requirement that applications understand
+ the interface between the block library and the cxlflash driver,
+ a high-level overview of each supported service (IOCTL) is provided
+ below.
+
+ The block library can be found on GitHub:
+ http://www.github.com/mikehollinger/ibmcapikv
+
+
+CXL Flash Driver IOCTLs
+=======================
+
+ Users, such as the block library, that wish to interface with a flash
+ device (LUN) via user space access need to use the services provided
+ by the cxlflash driver. As these services are implemented as ioctls,
+ a file descriptor handle must first be obtained in order to establish
+ the communication channel between a user and the kernel. This file
+ descriptor is obtained by opening the device special file associated
+ with the scsi disk device (/dev/sdb) that was created during LUN
+ discovery. As per the location of the cxlflash driver within the
+ SCSI protocol stack, this open is actually not seen by the cxlflash
+ driver. Upon successful open, the user receives a file descriptor
+ (herein referred to as fd1) that should be used for issuing the
+ subsequent ioctls listed below.
+
+ The structure definitions for these IOCTLs are available in:
+ uapi/scsi/cxlflash_ioctl.h
+
+DK_CXLFLASH_ATTACH
+------------------
+
+ This ioctl obtains, initializes, and starts a context using the CXL
+ kernel services. These services specify a context id (u16) by which
+ to uniquely identify the context and its allocated resources. The
+ services additionally provide a second file descriptor (herein
+ referred to as fd2) that is used by the block library to initiate
+ memory mapped I/O (via mmap()) to the CXL flash device and poll for
+ completion events. This file descriptor is intentionally installed by
+ this driver and not the CXL kernel services to allow for intermediary
+ notification and access in the event of a non-user-initiated close(),
+ such as a killed process. This design point is described in further
+ detail in the description for the DK_CXLFLASH_DETACH ioctl.
+
+ There are a few important aspects regarding the "tokens" (context id
+ and fd2) that are provided back to the user:
+
+ - These tokens are only valid for the process under which they
+ were created. The child of a forked process cannot continue
+ to use the context id or file descriptor created by its parent
+ (see DK_CXLFLASH_CLONE for further details).
+
+ - These tokens are only valid for the lifetime of the context and
+ the process under which they were created. Once either is
+ destroyed, the tokens are to be considered stale and subsequent
+ usage will result in errors.
+
+ - When a context is no longer needed, the user shall detach from
+ the context via the DK_CXLFLASH_DETACH ioctl.
+
+ - A close on fd2 will invalidate the tokens. This operation is not
+ required by the user.
+
+DK_CXLFLASH_USER_DIRECT
+-----------------------
+ This ioctl is responsible for transitioning the LUN to direct
+ (physical) mode access and configuring the AFU for direct access from
+ user space on a per-context basis. Additionally, the block size and
+ last logical block address (LBA) are returned to the user.
+
+ As mentioned previously, when operating in user space access mode,
+ LUNs may be accessed in whole or in part. Only one mode is allowed
+ at a time and if one mode is active (outstanding references exist),
+ requests to use the LUN in a different mode are denied.
+
+ The AFU is configured for direct access from user space by adding an
+ entry to the AFU's resource handle table. The index of the entry is
+ treated as a resource handle that is returned to the user. The user
+ is then able to use the handle to reference the LUN during I/O.
+
+DK_CXLFLASH_USER_VIRTUAL
+------------------------
+ This ioctl is responsible for transitioning the LUN to virtual mode
+ of access and configuring the AFU for virtual access from user space
+ on a per-context basis. Additionally, the block size and last logical
+ block address (LBA) are returned to the user.
+
+ As mentioned previously, when operating in user space access mode,
+ LUNs may be accessed in whole or in part. Only one mode is allowed
+ at a time and if one mode is active (outstanding references exist),
+ requests to use the LUN in a different mode are denied.
+
+ The AFU is configured for virtual access from user space by adding
+ an entry to the AFU's resource handle table. The index of the entry
+ is treated as a resource handle that is returned to the user. The
+ user is then able to use the handle to reference the LUN during I/O.
+
+ By default, the virtual LUN is created with a size of 0. The user
+ would need to use the DK_CXLFLASH_VLUN_RESIZE ioctl to adjust the grow
+ the virtual LUN to a desired size. To avoid having to perform this
+ resize for the initial creation of the virtual LUN, the user has the
+ option of specifying a size as part of the DK_CXLFLASH_USER_VIRTUAL
+ ioctl, such that when success is returned to the user, the
+ resource handle that is provided is already referencing provisioned
+ storage. This is reflected by the last LBA being a non-zero value.
+
+DK_CXLFLASH_VLUN_RESIZE
+-----------------------
+ This ioctl is responsible for resizing a previously created virtual
+ LUN and will fail if invoked upon a LUN that is not in virtual
+ mode. Upon success, an updated last LBA is returned to the user
+ indicating the new size of the virtual LUN associated with the
+ resource handle.
+
+ The partitioning of virtual LUNs is jointly mediated by the cxlflash
+ driver and the AFU. An allocation table is kept for each LUN that is
+ operating in the virtual mode and used to program a LUN translation
+ table that the AFU references when provided with a resource handle.
+
+DK_CXLFLASH_RELEASE
+-------------------
+ This ioctl is responsible for releasing a previously obtained
+ reference to either a physical or virtual LUN. This can be
+ thought of as the inverse of the DK_CXLFLASH_USER_DIRECT or
+ DK_CXLFLASH_USER_VIRTUAL ioctls. Upon success, the resource handle
+ is no longer valid and the entry in the resource handle table is
+ made available to be used again.
+
+ As part of the release process for virtual LUNs, the virtual LUN
+ is first resized to 0 to clear out and free the translation tables
+ associated with the virtual LUN reference.
+
+DK_CXLFLASH_DETACH
+------------------
+ This ioctl is responsible for unregistering a context with the
+ cxlflash driver and release outstanding resources that were
+ not explicitly released via the DK_CXLFLASH_RELEASE ioctl. Upon
+ success, all "tokens" which had been provided to the user from the
+ DK_CXLFLASH_ATTACH onward are no longer valid.
+
+DK_CXLFLASH_CLONE
+-----------------
+ This ioctl is responsible for cloning a previously created
+ context to a more recently created context. It exists solely to
+ support maintaining user space access to storage after a process
+ forks. Upon success, the child process (which invoked the ioctl)
+ will have access to the same LUNs via the same resource handle(s)
+ and fd2 as the parent, but under a different context.
+
+ Context sharing across processes is not supported with CXL and
+ therefore each fork must be met with establishing a new context
+ for the child process. This ioctl simplifies the state management
+ and playback required by a user in such a scenario. When a process
+ forks, child process can clone the parents context by first creating
+ a context (via DK_CXLFLASH_ATTACH) and then using this ioctl to
+ perform the clone from the parent to the child.
+
+ The clone itself is fairly simple. The resource handle and lun
+ translation tables are copied from the parent context to the child's
+ and then synced with the AFU.
+
+DK_CXLFLASH_VERIFY
+------------------
+ The DK_CXLFLASH_VERIFY ioctl is used to detect various changes such
+ as the capacity of the disk changing, the number of LUNs visible
+ changing, etc. In cases where the changes affect the application
+ (such as a LUN resize), the cxlflash driver will report the changed
+ state to the application.
+
+DK_CXLFLASH_RECOVER_AFU
+-----------------------
+ This ioctl is used to drive recovery (if such an action is warranted)
+ by resetting the adapter. Any state associated with all the open
+ contexts, will be re-established.
+
+DK_CXLFLASH_MANAGE_LUN
+----------------------
+ This ioctl is used to switch a LUN from a mode where it is available
+ for file-system access (legacy), to a mode where it is set aside for
+ exclusive user space access (superpipe). In case a LUN is visible
+ across multiple ports and adapters, this ioctl is used to uniquely
+ identify each LUN by its World Wide Node Name (WWNN).
diff --git a/drivers/scsi/cxlflash/Makefile b/drivers/scsi/cxlflash/Makefile
index dc95e20..3de309c 100644
--- a/drivers/scsi/cxlflash/Makefile
+++ b/drivers/scsi/cxlflash/Makefile
@@ -1,2 +1,2 @@
obj-$(CONFIG_CXLFLASH) += cxlflash.o
-cxlflash-y += main.o
+cxlflash-y += main.o superpipe.o
diff --git a/drivers/scsi/cxlflash/common.h b/drivers/scsi/cxlflash/common.h
index 155c2f7..3b16857 100644
--- a/drivers/scsi/cxlflash/common.h
+++ b/drivers/scsi/cxlflash/common.h
@@ -107,6 +107,16 @@ struct cxlflash_cfg {
struct pci_pool *cxlflash_cmd_pool;
struct pci_dev *parent_dev;
+ struct mutex ctx_tbl_list_mutex;
+ struct ctx_info *ctx_tbl[MAX_CONTEXT];
+ struct list_head ctx_err_recovery; /* contexts w/ recovery pending */
+ struct file_operations cxl_fops;
+
+ atomic_t num_user_contexts;
+
+ struct list_head lluns; /* list of llun_info structs */
+ spinlock_t slock;
+
wait_queue_head_t tmf_waitq;
bool tmf_active;
wait_queue_head_t eeh_waitq;
@@ -182,5 +192,12 @@ int cxlflash_afu_reset(struct cxlflash_cfg *);
struct afu_cmd *cxlflash_cmd_checkout(struct afu *);
void cxlflash_cmd_checkin(struct afu_cmd *);
int cxlflash_afu_sync(struct afu *, ctx_hndl_t, res_hndl_t, u8);
+void cxlflash_list_init(void);
+void cxlflash_list_terminate(void);
+int cxlflash_ioctl(struct scsi_device *, int, void __user *);
+void cxlflash_stop_term_user_contexts(struct cxlflash_cfg *);
+int cxlflash_mark_contexts_error(struct cxlflash_cfg *);
+void cxlflash_term_luns(struct cxlflash_cfg *);
+
#endif /* ifndef _CXLFLASH_COMMON_H */
diff --git a/drivers/scsi/cxlflash/main.c b/drivers/scsi/cxlflash/main.c
index e1f93ef..b87964b 100644
--- a/drivers/scsi/cxlflash/main.c
+++ b/drivers/scsi/cxlflash/main.c
@@ -498,11 +498,15 @@ static int cxlflash_eh_host_reset_handler(struct scsi_cmnd *scp)
switch (cfg->eeh_active) {
case EEH_STATE_NONE:
+ cfg->eeh_active = EEH_STATE_FAILED;
+ cxlflash_mark_contexts_error(cfg);
rcr = cxlflash_afu_reset(cfg);
if (rcr == 0)
rc = SUCCESS;
else
rc = FAILED;
+ cfg->eeh_active = EEH_STATE_NONE;
+ wake_up_all(&cfg->eeh_waitq);
break;
case EEH_STATE_ACTIVE:
wait_event(cfg->eeh_waitq, cfg->eeh_active != EEH_STATE_ACTIVE);
@@ -697,6 +701,7 @@ static struct scsi_host_template driver_template = {
.module = THIS_MODULE,
.name = CXLFLASH_ADAPTER_NAME,
.info = cxlflash_driver_info,
+ .ioctl = cxlflash_ioctl,
.proc_name = CXLFLASH_NAME,
.queuecommand = cxlflash_queuecommand,
.eh_device_reset_handler = cxlflash_eh_device_reset_handler,
@@ -845,6 +850,7 @@ static void cxlflash_remove(struct pci_dev *pdev)
switch (cfg->init_state) {
case INIT_STATE_SCSI:
+ cxlflash_term_luns(cfg);
scsi_remove_host(cfg->host);
scsi_host_put(cfg->host);
/* Fall through */
@@ -1984,7 +1990,7 @@ retry:
} else if (unlikely(newval < 0)) {
/* This should be rare. i.e. Only if two threads race and
* decrement before the MMIO read is done. In this case
- * just benefit from the other thread having updated
+ * just benefit from the other thread having updated
* afu->room.
*/
if (nretry++ < MC_ROOM_RETRY_CNT) {
@@ -2244,6 +2250,11 @@ static int cxlflash_probe(struct pci_dev *pdev,
INIT_WORK(&cfg->work_q, cxlflash_worker_thread);
cfg->lr_state = LINK_RESET_INVALID;
cfg->lr_port = -1;
+ mutex_init(&cfg->ctx_tbl_list_mutex);
+ spin_lock_init(&cfg->slock);
+ INIT_LIST_HEAD(&cfg->ctx_err_recovery);
+ INIT_LIST_HEAD(&cfg->lluns);
+
pci_set_drvdata(pdev, cfg);
@@ -2305,6 +2316,7 @@ out_remove:
static pci_ers_result_t cxlflash_pci_error_detected(struct pci_dev *pdev,
pci_channel_state_t state)
{
+ int rc = 0;
struct cxlflash_cfg *cfg = pci_get_drvdata(pdev);
pr_debug("%s: pdev=%p state=%u\n", __func__, pdev, state);
@@ -2314,6 +2326,11 @@ static pci_ers_result_t cxlflash_pci_error_detected(struct pci_dev *pdev,
cfg->eeh_active = EEH_STATE_ACTIVE;
udelay(100);
+ rc = cxlflash_mark_contexts_error(cfg);
+ if (unlikely(rc))
+ pr_err("%s: Failed to mark contexts in error!(rc=%d)\n",
+ __func__, rc);
+
term_mc(cfg, UNDO_START);
stop_afu(cfg);
@@ -2394,6 +2411,8 @@ static int __init init_cxlflash(void)
pr_info("%s: IBM Power CXL Flash Adapter: %s\n",
__func__, CXLFLASH_DRIVER_DATE);
+ cxlflash_list_init();
+
return pci_register_driver(&cxlflash_driver);
}
@@ -2402,6 +2421,8 @@ static int __init init_cxlflash(void)
*/
static void __exit exit_cxlflash(void)
{
+ cxlflash_list_terminate();
+
pci_unregister_driver(&cxlflash_driver);
}
diff --git a/drivers/scsi/cxlflash/superpipe.c b/drivers/scsi/cxlflash/superpipe.c
new file mode 100644
index 0000000..631cc6b
--- /dev/null
+++ b/drivers/scsi/cxlflash/superpipe.c
@@ -0,0 +1,2076 @@
+/*
+ * CXL Flash Device Driver
+ *
+ * Written by: Manoj N. Kumar <manoj@linux.vnet.ibm.com>, IBM Corporation
+ * Matthew R. Ochs <mrochs@linux.vnet.ibm.com>, IBM Corporation
+ *
+ * Copyright (C) 2015 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/file.h>
+#include <linux/moduleparam.h>
+#include <linux/syscalls.h>
+#include <misc/cxl.h>
+#include <asm/unaligned.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <uapi/scsi/cxlflash_ioctl.h>
+
+#include "sislite.h"
+#include "common.h"
+#include "superpipe.h"
+
+static struct cxlflash_global global;
+
+/**
+ * marshal_det_to_rele() - translate detach to release structure
+ * @detach: Destination structure for the translate/copy.
+ * @rele: Source structure from which to translate/copy.
+ */
+static void marshal_det_to_rele(struct dk_cxlflash_detach *detach,
+ struct dk_cxlflash_release *release)
+{
+ release->hdr = detach->hdr;
+ release->context_id = detach->context_id;
+}
+
+/**
+ * create_local() - allocate and initialize a local LUN information structure
+ * @sdev: SCSI device associated with LUN.
+ * @wwid: World Wide Node Name for LUN.
+ *
+ * Return: Allocated local llun_info structure on success, NULL on failure
+ */
+static struct llun_info *create_local(struct scsi_device *sdev, u8 *wwid)
+{
+ struct llun_info *lli = NULL;
+
+ lli = kzalloc(sizeof(*lli), GFP_KERNEL);
+ if (unlikely(!lli)) {
+ pr_err("%s: could not allocate lli\n", __func__);
+ goto out;
+ }
+
+ lli->sdev = sdev;
+ lli->newly_created = true;
+ lli->host_no = sdev->host->host_no;
+ lli->in_table = false;
+
+ memcpy(lli->wwid, wwid, DK_CXLFLASH_MANAGE_LUN_WWID_LEN);
+out:
+ return lli;
+}
+
+/**
+ * create_global() - allocate and initialize a global LUN information structure
+ * @sdev: SCSI device associated with LUN.
+ * @wwid: World Wide Node Name for LUN.
+ *
+ * Return: Allocated global glun_info structure on success, NULL on failure
+ */
+static struct glun_info *create_global(struct scsi_device *sdev, u8 *wwid)
+{
+ struct glun_info *gli = NULL;
+
+ gli = kzalloc(sizeof(*gli), GFP_KERNEL);
+ if (unlikely(!gli)) {
+ pr_err("%s: could not allocate gli\n", __func__);
+ goto out;
+ }
+
+ memcpy(gli->wwid, wwid, DK_CXLFLASH_MANAGE_LUN_WWID_LEN);
+out:
+ return gli;
+}
+
+/**
+ * lookup_local() - find a local LUN information structure by WWID
+ * @cfg: Internal structure associated with the host.
+ * @wwid: WWID associated with LUN.
+ *
+ * Return: Found local lun_info structure on success, NULL on failure
+ */
+static struct llun_info *lookup_local(struct cxlflash_cfg *cfg, u8 *wwid)
+{
+ struct llun_info *lli, *temp;
+ ulong lock_flags;
+
+ spin_lock_irqsave(&cfg->slock, lock_flags);
+
+ list_for_each_entry_safe(lli, temp, &cfg->lluns, list)
+ if (!memcmp(lli->wwid, wwid, DK_CXLFLASH_MANAGE_LUN_WWID_LEN)) {
+ lli->newly_created = false;
+ spin_unlock_irqrestore(&cfg->slock, lock_flags);
+ return lli;
+ }
+
+ spin_unlock_irqrestore(&cfg->slock, lock_flags);
+ return NULL;
+}
+
+/**
+ * lookup_global() - find a global LUN information structure by WWID
+ * @wwid: WWID associated with LUN.
+ *
+ * Return: Found global lun_info structure on success, NULL on failure
+ */
+static struct glun_info *lookup_global(u8 *wwid)
+{
+ struct glun_info *gli, *temp;
+ ulong lock_flags;
+
+ spin_lock_irqsave(&global.slock, lock_flags);
+
+ list_for_each_entry_safe(gli, temp, &global.gluns, list)
+ if (!memcmp(gli->wwid, wwid, DK_CXLFLASH_MANAGE_LUN_WWID_LEN)) {
+ spin_unlock_irqrestore(&global.slock, lock_flags);
+ return gli;
+ }
+
+ spin_unlock_irqrestore(&global.slock, lock_flags);
+ return NULL;
+}
+
+/**
+ * lookup_lun() - find or create a local LUN information structure
+ * @sdev: SCSI device associated with LUN.
+ * @wwid: WWID associated with LUN.
+ *
+ * When a local LUN is not found and a global LUN is also not found, both
+ * a global LUN and local LUN are created. The global LUN is added to the
+ * global list and the local LUN is returned.
+ *
+ * Return: Found/Allocated local lun_info structure on success, NULL on failure
+ */
+static struct llun_info *lookup_lun(struct scsi_device *sdev, u8 *wwid)
+{
+ struct llun_info *lli = NULL;
+ struct glun_info *gli = NULL;
+ struct Scsi_Host *shost = sdev->host;
+ struct cxlflash_cfg *cfg = shost_priv(shost);
+ ulong lock_flags;
+
+ if (unlikely(!wwid))
+ goto out;
+
+ lli = lookup_local(cfg, wwid);
+ if (lli)
+ goto out;
+
+ lli = create_local(sdev, wwid);
+ if (unlikely(!lli))
+ goto out;
+
+ gli = lookup_global(wwid);
+ if (gli) {
+ lli->parent = gli;
+ spin_lock_irqsave(&cfg->slock, lock_flags);
+ list_add(&lli->list, &cfg->lluns);
+ spin_unlock_irqrestore(&cfg->slock, lock_flags);
+ goto out;
+ }
+
+ gli = create_global(sdev, wwid);
+ if (unlikely(!gli)) {
+ kfree(lli);
+ lli = NULL;
+ goto out;
+ }
+
+ lli->parent = gli;
+ spin_lock_irqsave(&cfg->slock, lock_flags);
+ list_add(&lli->list, &cfg->lluns);
+ spin_unlock_irqrestore(&cfg->slock, lock_flags);
+
+ spin_lock_irqsave(&global.slock, lock_flags);
+ list_add(&gli->list, &global.gluns);
+ spin_unlock_irqrestore(&global.slock, lock_flags);
+
+out:
+ pr_debug("%s: returning %p\n", __func__, lli);
+ return lli;
+}
+
+/**
+ * cxlflash_term_luns() - Delete all entries from local lun list, free.
+ * @cfg: Internal structure associated with the host.
+ */
+void cxlflash_term_luns(struct cxlflash_cfg *cfg)
+{
+ struct llun_info *lli, *temp;
+ ulong lock_flags;
+
+ spin_lock_irqsave(&cfg->slock, lock_flags);
+ list_for_each_entry_safe(lli, temp, &cfg->lluns, list) {
+ list_del(&lli->list);
+ kfree(lli);
+ }
+ spin_unlock_irqrestore(&cfg->slock, lock_flags);
+}
+
+/**
+ * cxlflash_list_init() - initializes the global LUN list
+ */
+void cxlflash_list_init(void)
+{
+ INIT_LIST_HEAD(&global.gluns);
+ spin_lock_init(&global.slock);
+ global.err_page = NULL;
+}
+
+/**
+ * cxlflash_list_terminate() - frees resources associated with global LUN list
+ */
+void cxlflash_list_terminate(void)
+{
+ struct glun_info *gli, *temp;
+ ulong flags = 0;
+
+ spin_lock_irqsave(&global.slock, flags);
+ list_for_each_entry_safe(gli, temp, &global.gluns, list) {
+ list_del(&gli->list);
+ kfree(gli);
+ }
+
+ if (global.err_page) {
+ __free_page(global.err_page);
+ global.err_page = NULL;
+ }
+ spin_unlock_irqrestore(&global.slock, flags);
+}
+
+/**
+ * cxlflash_stop_term_user_contexts() - stops/terminates known user contexts
+ * @cfg: Internal structure associated with the host.
+ *
+ * When the host needs to go down, all users must be quiesced and their
+ * memory freed. This is accomplished by putting the contexts in error
+ * state which will notify the user and let them 'drive' the teardown.
+ * Meanwhile, this routine camps until all user contexts have been removed.
+ */
+void cxlflash_stop_term_user_contexts(struct cxlflash_cfg *cfg)
+{
+ int i, found;
+
+ cfg->eeh_active = EEH_STATE_FAILED;
+ cxlflash_mark_contexts_error(cfg);
+
+ while (true) {
+ found = false;
+
+ for (i = 0; i < MAX_CONTEXT; i++)
+ if (cfg->ctx_tbl[i]) {
+ found = true;
+ break;
+ }
+
+ if (!found && list_empty(&cfg->ctx_err_recovery))
+ return;
+
+ pr_debug("%s: Wait for user context to quiesce...\n", __func__);
+ wake_up_all(&cfg->eeh_waitq);
+ ssleep(1);
+ }
+}
+
+/**
+ * find_error_context() - locates a context by cookie on the error recovery list
+ * @cfg: Internal structure associated with the host.
+ * @rctxid: Desired context by id.
+ * @file: Desired context by file.
+ *
+ * Return: Found context on success, NULL on failure
+ */
+static struct ctx_info *find_error_context(struct cxlflash_cfg *cfg, u64 rctxid,
+ struct file *file)
+{
+ struct ctx_info *ctxi;
+
+ list_for_each_entry(ctxi, &cfg->ctx_err_recovery, list)
+ if ((ctxi->ctxid == rctxid) || (ctxi->file == file))
+ return ctxi;
+
+ return NULL;
+}
+
+/**
+ * get_context() - obtains a validated and locked context reference
+ * @cfg: Internal structure associated with the host.
+ * @rctxid: Desired context (raw, undecoded format).
+ * @arg: LUN information or file associated with request.
+ * @ctx_ctrl: Control information to 'steer' desired lookup.
+ *
+ * NOTE: despite the name pid, in linux, current->pid actually refers
+ * to the lightweight process id (tid) and can change if the process is
+ * multi threaded. The tgid remains constant for the process and only changes
+ * when the process of fork. For all intents and purposes, think of tgid
+ * as a pid in the traditional sense.
+ *
+ * Return: Validated context on success, NULL on failure
+ */
+struct ctx_info *get_context(struct cxlflash_cfg *cfg, u64 rctxid,
+ void *arg, enum ctx_ctrl ctx_ctrl)
+{
+ struct ctx_info *ctxi = NULL;
+ struct lun_access *lun_access = NULL;
+ struct file *file = NULL;
+ struct llun_info *lli = arg;
+ u64 ctxid = DECODE_CTXID(rctxid);
+ int rc;
+ pid_t pid = current->tgid, ctxpid = 0;
+
+ if (ctx_ctrl & CTX_CTRL_FILE) {
+ lli = NULL;
+ file = (struct file *)arg;
+ }
+
+ if (ctx_ctrl & CTX_CTRL_CLONE)
+ pid = current->parent->tgid;
+
+ if (likely(ctxid < MAX_CONTEXT)) {
+retry:
+ rc = mutex_lock_interruptible(&cfg->ctx_tbl_list_mutex);
+ if (rc)
+ goto out;
+
+ ctxi = cfg->ctx_tbl[ctxid];
+ if (ctxi)
+ if ((file && (ctxi->file != file)) ||
+ (!file && (ctxi->ctxid != rctxid)))
+ ctxi = NULL;
+
+ if ((ctx_ctrl & CTX_CTRL_ERR) ||
+ (!ctxi && (ctx_ctrl & CTX_CTRL_ERR_FALLBACK)))
+ ctxi = find_error_context(cfg, rctxid, file);
+ mutex_unlock(&cfg->ctx_tbl_list_mutex);
+ if (!ctxi)
+ goto out;
+
+ rc = mutex_trylock(&ctxi->mutex);
+ if (!rc)
+ goto retry;
+
+ ctxpid = ctxi->pid;
+ if (likely(!(ctx_ctrl & CTX_CTRL_NOPID)))
+ if (pid != ctxpid)
+ goto denied;
+
+ if (lli) {
+ list_for_each_entry(lun_access, &ctxi->luns, list)
+ if (lun_access->lli == lli)
+ goto out;
+ goto denied;
+ }
+ }
+
+out:
+ pr_debug("%s: rctxid=%016llX ctxinfo=%p ctxpid=%u pid=%u ctx_ctrl=%u\n",
+ __func__, rctxid, ctxi, ctxpid, pid, ctx_ctrl);
+
+ return ctxi;
+
+denied:
+ mutex_unlock(&ctxi->mutex);
+ ctxi = NULL;
+ goto out;
+}
+
+/**
+ * afu_attach() - attach a context to the AFU
+ * @cfg: Internal structure associated with the host.
+ * @ctxi: Context to attach.
+ *
+ * Upon setting the context capabilities, they must be confirmed with
+ * a read back operation as the context might have been closed since
+ * the mailbox was unlocked. When this occurs, registration is failed.
+ *
+ * Return: 0 on success, -errno on failure
+ */
+static int afu_attach(struct cxlflash_cfg *cfg, struct ctx_info *ctxi)
+{
+ struct afu *afu = cfg->afu;
+ struct sisl_ctrl_map *ctrl_map = ctxi->ctrl_map;
+ int rc = 0;
+ u64 val;
+
+ /* Unlock cap and restrict user to read/write cmds in translated mode */
+ readq_be(&ctrl_map->mbox_r);
+ val = (SISL_CTX_CAP_READ_CMD | SISL_CTX_CAP_WRITE_CMD);
+ writeq_be(val, &ctrl_map->ctx_cap);
+ val = readq_be(&ctrl_map->ctx_cap);
+ if (val != (SISL_CTX_CAP_READ_CMD | SISL_CTX_CAP_WRITE_CMD)) {
+ pr_err("%s: ctx may be closed val=%016llX\n", __func__, val);
+ rc = -EAGAIN;
+ goto out;
+ }
+
+ /* Set up MMIO registers pointing to the RHT */
+ writeq_be((u64)ctxi->rht_start, &ctrl_map->rht_start);
+ val = SISL_RHT_CNT_ID((u64)MAX_RHT_PER_CONTEXT, (u64)(afu->ctx_hndl));
+ writeq_be(val, &ctrl_map->rht_cnt_id);
+out:
+ pr_debug("%s: returning rc=%d\n", __func__, rc);
+ return rc;
+}
+
+/**
+ * read_cap16() - issues a SCSI READ_CAP16 command
+ * @sdev: SCSI device associated with LUN.
+ * @lli: LUN destined for capacity request.
+ *
+ * Return: 0 on success, -1 on failure
+ */
+static int read_cap16(struct scsi_device *sdev, struct llun_info *lli)
+{
+ struct glun_info *gli = lli->parent;
+ u8 scsi_cmd[MAX_COMMAND_SIZE];
+ u8 *cmd_buf = NULL;
+ u8 *sense_buf = NULL;
+ int rc = 0;
+ int result = 0;
+
+ memset(scsi_cmd, 0, sizeof(scsi_cmd));
+ cmd_buf = kzalloc(CMD_BUFSIZE, GFP_KERNEL);
+ sense_buf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_NOIO);
+ if (!cmd_buf || !sense_buf) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ scsi_cmd[0] = SERVICE_ACTION_IN_16; /* read cap(16) */
+ scsi_cmd[1] = SAI_READ_CAPACITY_16; /* service action */
+ put_unaligned_be32(CMD_BUFSIZE, &scsi_cmd[10]);
+
+ pr_debug("%s: sending cmd(0x%x)\n", __func__, scsi_cmd[0]);
+
+ result = scsi_execute(sdev, scsi_cmd, DMA_FROM_DEVICE, cmd_buf,
+ CMD_BUFSIZE, sense_buf,
+ (MC_DISCOVERY_TIMEOUT*HZ), 5, 0, NULL);
+
+ if (result) {
+ pr_err("%s: command failed, result=0x%x\n", __func__, result);
+ rc = -EIO;
+ goto out;
+ }
+
+ /*
+ * Read cap was successful, grab values from the buffer;
+ * note that we don't need to worry about unaligned access
+ * as the buffer is allocated on an aligned boundary.
+ */
+ spin_lock(&gli->slock);
+ gli->max_lba = swab64(*((u64 *)&cmd_buf[0]));
+ gli->blk_len = swab32(*((u32 *)&cmd_buf[8]));
+ spin_unlock(&gli->slock);
+
+out:
+ kfree(cmd_buf);
+ kfree(sense_buf);
+ pr_debug("%s: maxlba=%lld blklen=%d rc=%d\n", __func__,
+ gli->max_lba, gli->blk_len, rc);
+ return rc;
+}
+
+/**
+ * get_rhte() - obtains validated resource handle table entry reference
+ * @ctxi: Context owning the resource handle.
+ * @rhndl: Resource handle associated with entry.
+ * @lli: LUN associated with request.
+ *
+ * Return: Validated RHTE on success, NULL on failure
+ */
+struct sisl_rht_entry *get_rhte(struct ctx_info *ctxi, res_hndl_t rhndl,
+ struct llun_info *lli)
+{
+ struct sisl_rht_entry *rhte = NULL;
+
+ if (unlikely(!ctxi->rht_start)) {
+ pr_err("%s: Context does not have allocated RHT!\n", __func__);
+ goto out;
+ }
+
+ if (unlikely(rhndl >= MAX_RHT_PER_CONTEXT)) {
+ pr_err("%s: Bad resource handle! (%d)\n", __func__, rhndl);
+ goto out;
+ }
+
+ if (unlikely(ctxi->rht_lun[rhndl] != lli)) {
+ pr_err("%s: Bad resource handle LUN! (%d)\n", __func__, rhndl);
+ goto out;
+ }
+
+ rhte = &ctxi->rht_start[rhndl];
+ if (unlikely(rhte->nmask == 0)) {
+ pr_err("%s: Unopened resource handle! (%d)\n", __func__, rhndl);
+ rhte = NULL;
+ goto out;
+ }
+
+out:
+ return rhte;
+}
+
+/**
+ * rhte_checkout() - obtains free/empty resource handle table entry
+ * @ctxi: Context owning the resource handle.
+ * @lli: LUN associated with request.
+ *
+ * Return: Free RHTE on success, NULL on failure
+ */
+struct sisl_rht_entry *rhte_checkout(struct ctx_info *ctxi,
+ struct llun_info *lli)
+{
+ struct sisl_rht_entry *rhte = NULL;
+ int i;
+
+ /* Find a free RHT entry */
+ for (i = 0; i < MAX_RHT_PER_CONTEXT; i++)
+ if (ctxi->rht_start[i].nmask == 0) {
+ rhte = &ctxi->rht_start[i];
+ ctxi->rht_out++;
+ break;
+ }
+
+ if (likely(rhte))
+ ctxi->rht_lun[i] = lli;
+
+ pr_debug("%s: returning rhte=%p (%d)\n", __func__, rhte, i);
+ return rhte;
+}
+
+/**
+ * rhte_checkin() - releases a resource handle table entry
+ * @ctxi: Context owning the resource handle.
+ * @rhte: RHTE to release.
+ */
+void rhte_checkin(struct ctx_info *ctxi,
+ struct sisl_rht_entry *rhte)
+{
+ rhte->nmask = 0;
+ rhte->fp = 0;
+ ctxi->rht_out--;
+ ctxi->rht_lun[rhte - ctxi->rht_start] = NULL;
+}
+
+/**
+ * rhte_format1() - populates a RHTE for format 1
+ * @rhte: RHTE to populate.
+ * @lun_id: LUN ID of LUN associated with RHTE.
+ * @perm: Desired permissions for RHTE.
+ * @port_sel: Port selection mask
+ */
+static void rht_format1(struct sisl_rht_entry *rhte, u64 lun_id, u32 perm,
+ u32 port_sel)
+{
+ /*
+ * Populate the Format 1 RHT entry for direct access (physical
+ * LUN) using the synchronization sequence defined in the
+ * SISLite specification.
+ */
+ struct sisl_rht_entry_f1 dummy = { 0 };
+ struct sisl_rht_entry_f1 *rhte_f1 = (struct sisl_rht_entry_f1 *)rhte;
+
+ memset(rhte_f1, 0, sizeof(*rhte_f1));
+ rhte_f1->fp = SISL_RHT_FP(1U, 0);
+ dma_wmb(); /* Make setting of format bit visible */
+
+ rhte_f1->lun_id = lun_id;
+ dma_wmb(); /* Make setting of LUN id visible */
+
+ /*
+ * Use a dummy RHT Format 1 entry to build the second dword
+ * of the entry that must be populated in a single write when
+ * enabled (valid bit set to TRUE).
+ */
+ dummy.valid = 0x80;
+ dummy.fp = SISL_RHT_FP(1U, perm);
+ dummy.port_sel = port_sel;
+ rhte_f1->dw = dummy.dw;
+
+ dma_wmb(); /* Make remaining RHT entry fields visible */
+}
+
+/**
+ * cxlflash_lun_attach() - attaches a user to a LUN and manages the LUN's mode
+ * @lli: LUN to attach.
+ * @mode: Desired mode of the LUN.
+ *
+ * Return: 0 on success, -errno on failure
+ */
+int cxlflash_lun_attach(struct glun_info *gli, enum lun_mode mode)
+{
+ int rc = 0;
+
+ spin_lock(&gli->slock);
+ if (gli->mode == MODE_NONE)
+ gli->mode = mode;
+ else if (gli->mode != mode) {
+ pr_err("%s: LUN operating in mode %d, requested mode %d\n",
+ __func__, gli->mode, mode);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ gli->users++;
+ WARN_ON(gli->users <= 0);
+out:
+ pr_debug("%s: Returning rc=%d gli->mode=%u gli->users=%u\n",
+ __func__, rc, gli->mode, gli->users);
+ spin_unlock(&gli->slock);
+ return rc;
+}
+
+/**
+ * cxlflash_lun_detach() - detaches a user from a LUN and resets the LUN's mode
+ * @lli: LUN to detach.
+ */
+void cxlflash_lun_detach(struct glun_info *gli)
+{
+ spin_lock(&gli->slock);
+ WARN_ON(gli->mode == MODE_NONE);
+ if (--gli->users == 0)
+ gli->mode = MODE_NONE;
+ pr_debug("%s: gli->users=%u\n", __func__, gli->users);
+ WARN_ON(gli->users < 0);
+ spin_unlock(&gli->slock);
+}
+
+/**
+ * _cxlflash_disk_release() - releases the specified resource entry
+ * @sdev: SCSI device associated with LUN.
+ * @ctxi: Context owning resources.
+ * @release: Release ioctl data structure.
+ *
+ * Return: 0 on success, -errno on failure
+ */
+int _cxlflash_disk_release(struct scsi_device *sdev,
+ struct ctx_info *ctxi,
+ struct dk_cxlflash_release *release)
+{
+ struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
+ struct llun_info *lli = sdev->hostdata;
+ struct glun_info *gli = lli->parent;
+ struct afu *afu = cfg->afu;
+ bool unlock_ctx = false;
+
+ res_hndl_t rhndl = release->rsrc_handle;
+
+ int rc = 0;
+ u64 ctxid = DECODE_CTXID(release->context_id),
+ rctxid = release->context_id;
+
+ struct sisl_rht_entry *rhte;
+ struct sisl_rht_entry_f1 *rhte_f1;
+
+ pr_debug("%s: ctxid=%llu rhndl=0x%llx gli->mode=%u gli->users=%u\n",
+ __func__, ctxid, release->rsrc_handle, gli->mode, gli->users);
+
+ if (!ctxi) {
+ ctxi = get_context(cfg, rctxid, lli, CTX_CTRL_ERR_FALLBACK);
+ if (unlikely(!ctxi)) {
+ pr_err("%s: Bad context! (%llu)\n", __func__, ctxid);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ unlock_ctx = true;
+ }
+
+ rhte = get_rhte(ctxi, rhndl, lli);
+ if (unlikely(!rhte)) {
+ pr_err("%s: Bad resource handle! (%d)\n", __func__, rhndl);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ switch (gli->mode) {
+ case MODE_PHYSICAL:
+ /*
+ * Clear the Format 1 RHT entry for direct access
+ * (physical LUN) using the synchronization sequence
+ * defined in the SISLite specification.
+ */
+ rhte_f1 = (struct sisl_rht_entry_f1 *)rhte;
+
+ rhte_f1->valid = 0;
+ dma_wmb(); /* Make revocation of RHT entry visible */
+
+ rhte_f1->lun_id = 0;
+ dma_wmb(); /* Make clearing of LUN id visible */
+
+ rhte_f1->dw = 0;
+ dma_wmb(); /* Make RHT entry bottom-half clearing visible */
+
+ cxlflash_afu_sync(afu, ctxid, rhndl, AFU_HW_SYNC);
+ break;
+ default:
+ BUG();
+ goto out;
+ }
+
+ rhte_checkin(ctxi, rhte);
+ cxlflash_lun_detach(gli);
+
+out:
+ if (unlock_ctx)
+ mutex_unlock(&ctxi->mutex);
+ pr_debug("%s: returning rc=%d\n", __func__, rc);
+ return rc;
+}
+
+int cxlflash_disk_release(struct scsi_device *sdev,
+ struct dk_cxlflash_release *release)
+{
+ return _cxlflash_disk_release(sdev, NULL, release);
+}
+
+/**
+ * destroy_context() - releases a context
+ * @cfg: Internal structure associated with the host.
+ * @ctxi: Context to release.
+ *
+ * Note that the rht_lun member of the context was cut from a single
+ * allocation when the context was created and therefore does not need
+ * to be explicitly freed. Also note that we conditionally check for the
+ * existence of the context control map before clearing the RHT registers
+ * and context capbilities because it is possible to destroy a context
+ * while the context is in the error state (previous mapping was removed
+ * [so we don't have to worry about clearing] and context is waiting for
+ * a new mapping).
+ */
+static void destroy_context(struct cxlflash_cfg *cfg,
+ struct ctx_info *ctxi)
+{
+ WARN_ON(!list_empty(&ctxi->luns));
+
+ /* Clear RHT registers and drop all capabilities for this context */
+ if (ctxi->ctrl_map) {
+ writeq_be(0, &ctxi->ctrl_map->rht_start);
+ writeq_be(0, &ctxi->ctrl_map->rht_cnt_id);
+ writeq_be(0, &ctxi->ctrl_map->ctx_cap);
+ }
+
+ /* Free the RHT memory */
+ free_page((ulong)ctxi->rht_start);
+
+ /* Free the context; note that rht_lun was allocated at same time */
+ kfree(ctxi);
+ atomic_dec_if_positive(&cfg->num_user_contexts);
+}
+
+/**
+ * create_context() - allocates and initializes a context
+ * @cfg: Internal structure associated with the host.
+ * @ctx: Previously obtained CXL context reference.
+ * @ctxid: Previously obtained process element associated with CXL context.
+ * @adap_fd: Previously obtained adapter fd associated with CXL context.
+ * @file: Previously obtained file associated with CXL context.
+ * @perms: User-specified permissions.
+ *
+ * The context's mutex is locked when an allocated context is returned.
+ *
+ * Return: Allocated context on success, NULL on failure
+ */
+static struct ctx_info *create_context(struct cxlflash_cfg *cfg,
+ struct cxl_context *ctx, int ctxid,
+ int adap_fd, struct file *file,
+ u32 perms)
+{
+ char *tmp = NULL;
+ size_t size;
+ struct afu *afu = cfg->afu;
+ struct ctx_info *ctxi = NULL;
+ struct sisl_rht_entry *rhte;
+
+ size = (MAX_RHT_PER_CONTEXT * sizeof(*ctxi->rht_lun));
+ size += sizeof(*ctxi);
+
+ tmp = kzalloc(size, GFP_KERNEL);
+ if (unlikely(!tmp)) {
+ pr_err("%s: Unable to allocate context! (%ld)\n",
+ __func__, size);
+ goto out;
+ }
+
+ rhte = (struct sisl_rht_entry *)get_zeroed_page(GFP_KERNEL);
+ if (unlikely(!rhte)) {
+ pr_err("%s: Unable to allocate RHT!\n", __func__);
+ goto err;
+ }
+
+ ctxi = (struct ctx_info *)tmp;
+ ctxi->rht_lun = (struct llun_info **)(tmp + sizeof(*ctxi));
+ ctxi->rht_start = rhte;
+ ctxi->rht_perms = perms;
+
+ ctxi->ctrl_map = &afu->afu_map->ctrls[ctxid].ctrl;
+ ctxi->ctxid = ENCODE_CTXID(ctxi, ctxid);
+ ctxi->lfd = adap_fd;
+ ctxi->pid = current->tgid; /* tgid = pid */
+ ctxi->ctx = ctx;
+ ctxi->file = file;
+ mutex_init(&ctxi->mutex);
+ INIT_LIST_HEAD(&ctxi->luns);
+ INIT_LIST_HEAD(&ctxi->list); /* initialize for list_empty() */
+
+ atomic_inc(&cfg->num_user_contexts);
+ mutex_lock(&ctxi->mutex);
+out:
+ return ctxi;
+
+err:
+ kfree(tmp);
+ goto out;
+}
+
+/**
+ * _cxlflash_disk_detach() - detaches a LUN from a context
+ * @sdev: SCSI device associated with LUN.
+ * @ctxi: Context owning resources.
+ * @detach: Detach ioctl data structure.
+ *
+ * As part of the detach, all per-context resources associated with the LUN
+ * are cleaned up. When detaching the last LUN for a context, the context
+ * itself is cleaned up and released.
+ *
+ * Return: 0 on success, -errno on failure
+ */
+static int _cxlflash_disk_detach(struct scsi_device *sdev,
+ struct ctx_info *ctxi,
+ struct dk_cxlflash_detach *detach)
+{
+ struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
+ struct llun_info *lli = sdev->hostdata;
+ struct lun_access *lun_access, *t;
+ struct dk_cxlflash_release rel;
+ bool unlock_ctx = false;
+
+ int i;
+ int rc = 0;
+ int lfd;
+ u64 ctxid = DECODE_CTXID(detach->context_id),
+ rctxid = detach->context_id;
+
+ pr_debug("%s: ctxid=%llu\n", __func__, ctxid);
+
+ if (!ctxi) {
+ ctxi = get_context(cfg, rctxid, lli, CTX_CTRL_ERR_FALLBACK);
+ if (unlikely(!ctxi)) {
+ pr_err("%s: Bad context! (%llu)\n", __func__, ctxid);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ unlock_ctx = true;
+ }
+
+ /* Cleanup outstanding resources tied to this LUN */
+ if (ctxi->rht_out) {
+ marshal_det_to_rele(detach, &rel);
+ for (i = 0; i < MAX_RHT_PER_CONTEXT; i++) {
+ if (ctxi->rht_lun[i] == lli) {
+ rel.rsrc_handle = i;
+ _cxlflash_disk_release(sdev, ctxi, &rel);
+ }
+
+ /* No need to loop further if we're done */
+ if (ctxi->rht_out == 0)
+ break;
+ }
+ }
+
+ /* Take our LUN out of context, free the node */
+ list_for_each_entry_safe(lun_access, t, &ctxi->luns, list)
+ if (lun_access->lli == lli) {
+ list_del(&lun_access->list);
+ kfree(lun_access);
+ lun_access = NULL;
+ break;
+ }
+
+ /* Tear down context following last LUN cleanup */
+ if (list_empty(&ctxi->luns)) {
+ mutex_lock(&cfg->ctx_tbl_list_mutex);
+
+ /* Might not have been in error list so conditionally remove */
+ if (!list_empty(&ctxi->list))
+ list_del(&ctxi->list);
+ cfg->ctx_tbl[ctxid] = NULL;
+ mutex_unlock(&cfg->ctx_tbl_list_mutex);
+ mutex_unlock(&ctxi->mutex);
+
+ lfd = ctxi->lfd;
+ destroy_context(cfg, ctxi);
+ ctxi = NULL;
+ unlock_ctx = false;
+
+ /*
+ * As a last step, clean up external resources when not
+ * already on an external cleanup thread, ie: close(adap_fd).
+ *
+ * NOTE: this will free up the context from the CXL services,
+ * allowing it to dole out the same context_id on a future
+ * (or even currently in-flight) disk_attach operation.
+ */
+ if (lfd != -1)
+ sys_close(lfd);
+ }
+
+out:
+ if (unlock_ctx)
+ mutex_unlock(&ctxi->mutex);
+ pr_debug("%s: returning rc=%d\n", __func__, rc);
+ return rc;
+}
+
+static int cxlflash_disk_detach(struct scsi_device *sdev,
+ struct dk_cxlflash_detach *detach)
+{
+ return _cxlflash_disk_detach(sdev, NULL, detach);
+}
+
+/**
+ * cxlflash_cxl_release() - release handler for adapter file descriptor
+ * @inode: Filesystem inode associated with fd.
+ * @file: File installed with adapter file descriptor.
+ *
+ * This routine is the release handler for the fops registered with
+ * the CXL services on an initial attach for a context. It is called
+ * when a close is performed on the adapter file descriptor returned
+ * to the user. Programmatically, the user is not required to perform
+ * the close, as it is handled internally via the detach ioctl when
+ * a context is being removed. Note that nothing prevents the user
+ * from performing a close, but the user should be aware that doing
+ * so is considered catastrophic and subsequent usage of the superpipe
+ * API with previously saved off tokens will fail.
+ *
+ * When initiated from an external close (either by the user or via
+ * a process tear down), the routine derives the context reference
+ * and calls detach for each LUN associated with the context. The
+ * final detach operation will cause the context itself to be freed.
+ * Note that the saved off lfd is reset prior to calling detach to
+ * signify that the final detach should not perform a close.
+ *
+ * When initiated from a detach operation as part of the tear down
+ * of a context, the context is first completely freed and then the
+ * close is performed. This routine will fail to derive the context
+ * reference (due to the context having already been freed) and then
+ * call into the CXL release entry point.
+ *
+ * Thus, with exception to when the CXL process element (context id)
+ * lookup fails (a case that should theoretically never occur), every
+ * call into this routine results in a complete freeing of a context.
+ *
+ * As part of the detach, all per-context resources associated with the LUN
+ * are cleaned up. When detaching the last LUN for a context, the context
+ * itself is cleaned up and released.
+ *
+ * Return: 0 on success
+ */
+static int cxlflash_cxl_release(struct inode *inode, struct file *file)
+{
+ struct cxl_context *ctx = cxl_fops_get_context(file);
+ struct cxlflash_cfg *cfg = container_of(file->f_op, struct cxlflash_cfg,
+ cxl_fops);
+ struct ctx_info *ctxi = NULL;
+ struct dk_cxlflash_detach detach = { { 0 }, 0 };
+ struct lun_access *lun_access, *t;
+ enum ctx_ctrl ctrl = CTX_CTRL_ERR_FALLBACK | CTX_CTRL_FILE;
+ int ctxid;
+
+ ctxid = cxl_process_element(ctx);
+ if (unlikely(ctxid < 0)) {
+ pr_err("%s: Context %p was closed! (%d)\n",
+ __func__, ctx, ctxid);
+ goto out;
+ }
+
+ ctxi = get_context(cfg, ctxid, file, ctrl);
+ if (unlikely(!ctxi)) {
+ ctxi = get_context(cfg, ctxid, file, ctrl | CTX_CTRL_CLONE);
+ if (!ctxi) {
+ pr_debug("%s: Context %d already free!\n",
+ __func__, ctxid);
+ goto out_release;
+ }
+
+ pr_debug("%s: Another process owns context %d!\n",
+ __func__, ctxid);
+ mutex_unlock(&ctxi->mutex);
+ goto out;
+ }
+
+ pr_debug("%s: close(%d) for context %d\n",
+ __func__, ctxi->lfd, ctxid);
+
+ /* Reset the file descriptor to indicate we're on a close() thread */
+ ctxi->lfd = -1;
+ detach.context_id = ctxi->ctxid;
+ list_for_each_entry_safe(lun_access, t, &ctxi->luns, list)
+ _cxlflash_disk_detach(lun_access->sdev, ctxi, &detach);
+out_release:
+ cxl_fd_release(inode, file);
+out:
+ pr_debug("%s: returning\n", __func__);
+ return 0;
+}
+
+/**
+ * unmap_context() - clears a previously established mapping
+ * @ctxi: Context owning the mapping.
+ *
+ * This routine is used to switch between the error notification page
+ * (dummy page of all 1's) and the real mapping (established by the CXL
+ * fault handler).
+ */
+static void unmap_context(struct ctx_info *ctxi)
+{
+ unmap_mapping_range(ctxi->file->f_mapping, 0, 0, 1);
+}
+
+/**
+ * get_err_page() - obtains and allocates the error notification page
+ *
+ * Return: error notification page on success, NULL on failure
+ */
+static struct page *get_err_page(void)
+{
+ struct page *err_page = global.err_page;
+ ulong flags = 0;
+
+ if (unlikely(!err_page)) {
+ err_page = alloc_page(GFP_KERNEL);
+ if (unlikely(!err_page)) {
+ pr_err("%s: Unable to allocate err_page!\n", __func__);
+ goto out;
+ }
+
+ memset(page_address(err_page), -1, PAGE_SIZE);
+
+ /* Serialize update w/ other threads to avoid a leak */
+ spin_lock_irqsave(&global.slock, flags);
+ if (likely(!global.err_page))
+ global.err_page = err_page;
+ else {
+ __free_page(err_page);
+ err_page = global.err_page;
+ }
+ spin_unlock_irqrestore(&global.slock, flags);
+ }
+
+out:
+ pr_debug("%s: returning err_page=%p\n", __func__, err_page);
+ return err_page;
+}
+
+/**
+ * cxlflash_mmap_fault() - mmap fault handler for adapter file descriptor
+ * @vma: VM area associated with mapping.
+ * @vmf: VM fault associated with current fault.
+ *
+ * To support error notification via MMIO, faults are 'caught' by this routine
+ * that was inserted before passing back the adapter file descriptor on attach.
+ * When a fault occurs, this routine evaluates if error recovery is active and
+ * if so, installs the error page to 'notify' the user about the error state.
+ * During normal operation, the fault is simply handled by the original fault
+ * handler that was installed by CXL services as part of initializing the
+ * adapter file descriptor.
+ *
+ * Return: 0 on success, VM_FAULT_SIGBUS on failure
+ */
+static int cxlflash_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+ struct file *file = vma->vm_file;
+ struct cxl_context *ctx = cxl_fops_get_context(file);
+ struct cxlflash_cfg *cfg = container_of(file->f_op, struct cxlflash_cfg,
+ cxl_fops);
+ struct ctx_info *ctxi = NULL;
+ struct page *err_page = NULL;
+ enum ctx_ctrl ctrl = CTX_CTRL_ERR_FALLBACK | CTX_CTRL_FILE;
+ int rc = 0;
+ int ctxid;
+
+ ctxid = cxl_process_element(ctx);
+ if (unlikely(ctxid < 0)) {
+ pr_err("%s: Context %p was closed! (%d)\n",
+ __func__, ctx, ctxid);
+ goto err;
+ }
+
+ ctxi = get_context(cfg, ctxid, file, ctrl);
+ if (unlikely(!ctxi)) {
+ pr_err("%s: Bad context! (%d)\n", __func__, ctxid);
+ goto err;
+ }
+
+ pr_debug("%s: fault(%d) for context %d\n",
+ __func__, ctxi->lfd, ctxid);
+
+ if (likely(!ctxi->err_recovery_active))
+ rc = ctxi->cxl_mmap_vmops->fault(vma, vmf);
+ else {
+ pr_debug("%s: err recovery active, use err_page!\n", __func__);
+
+ err_page = get_err_page();
+ if (unlikely(!err_page)) {
+ pr_err("%s: Could not obtain error page!\n", __func__);
+ rc = VM_FAULT_RETRY;
+ goto out;
+ }
+
+ get_page(err_page);
+ vmf->page = err_page;
+ }
+
+out:
+ if (likely(ctxi))
+ mutex_unlock(&ctxi->mutex);
+ pr_debug("%s: returning rc=%d\n", __func__, rc);
+ return rc;
+
+err:
+ rc = VM_FAULT_SIGBUS;
+ goto out;
+}
+
+/*
+ * Local MMAP vmops to 'catch' faults
+ */
+static const struct vm_operations_struct cxlflash_mmap_vmops = {
+ .fault = cxlflash_mmap_fault,
+};
+
+/**
+ * cxlflash_cxl_mmap() - mmap handler for adapter file descriptor
+ * @file: File installed with adapter file descriptor.
+ * @vma: VM area associated with mapping.
+ *
+ * Installs local mmap vmops to 'catch' faults for error notification support.
+ *
+ * Return: 0 on success, -errno on failure
+ */
+static int cxlflash_cxl_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ struct cxl_context *ctx = cxl_fops_get_context(file);
+ struct cxlflash_cfg *cfg = container_of(file->f_op, struct cxlflash_cfg,
+ cxl_fops);
+ struct ctx_info *ctxi = NULL;
+ enum ctx_ctrl ctrl = CTX_CTRL_ERR_FALLBACK | CTX_CTRL_FILE;
+ int ctxid;
+ int rc = 0;
+
+ ctxid = cxl_process_element(ctx);
+ if (unlikely(ctxid < 0)) {
+ pr_err("%s: Context %p was closed! (%d)\n",
+ __func__, ctx, ctxid);
+ rc = -EIO;
+ goto out;
+ }
+
+ ctxi = get_context(cfg, ctxid, file, ctrl);
+ if (unlikely(!ctxi)) {
+ pr_err("%s: Bad context! (%d)\n", __func__, ctxid);
+ rc = -EIO;
+ goto out;
+ }
+
+ pr_debug("%s: mmap(%d) for context %d\n", __func__, ctxi->lfd, ctxid);
+
+ rc = cxl_fd_mmap(file, vma);
+ if (likely(!rc)) {
+ /* Insert ourself in the mmap fault handler path */
+ ctxi->cxl_mmap_vmops = vma->vm_ops;
+ vma->vm_ops = &cxlflash_mmap_vmops;
+ }
+
+out:
+ if (likely(ctxi))
+ mutex_unlock(&ctxi->mutex);
+ return rc;
+}
+
+/*
+ * Local fops for adapter file descriptor
+ */
+static const struct file_operations cxlflash_cxl_fops = {
+ .owner = THIS_MODULE,
+ .mmap = cxlflash_cxl_mmap,
+ .release = cxlflash_cxl_release,
+};
+
+/**
+ * cxlflash_mark_contexts_error() - move contexts to error state and list
+ * @cfg: Internal structure associated with the host.
+ *
+ * A context is only moved over to the error list when there are no outstanding
+ * references to it. This ensures that a running operation has completed. After
+ * marking all contexts in error, the CPU is scheduled to allow user threads
+ * time to respond to the freshly installed error page.
+ *
+ * Return: 0 on success, -errno on failure
+ */
+int cxlflash_mark_contexts_error(struct cxlflash_cfg *cfg)
+{
+ int i, rc = 0;
+ struct ctx_info *ctxi = NULL;
+
+ mutex_lock(&cfg->ctx_tbl_list_mutex);
+
+ for (i = 0; i < MAX_CONTEXT; i++) {
+ ctxi = cfg->ctx_tbl[i];
+ if (ctxi) {
+ mutex_lock(&ctxi->mutex);
+ cfg->ctx_tbl[i] = NULL;
+ list_add(&ctxi->list, &cfg->ctx_err_recovery);
+ ctxi->err_recovery_active = true;
+ ctxi->ctrl_map = NULL;
+ unmap_context(ctxi);
+ mutex_unlock(&ctxi->mutex);
+ }
+ }
+
+ mutex_unlock(&cfg->ctx_tbl_list_mutex);
+ schedule();
+ return rc;
+}
+
+/*
+ * Dummy NULL fops
+ */
+static const struct file_operations null_fops = {
+ .owner = THIS_MODULE,
+};
+
+/**
+ * cxlflash_disk_attach() - attach a LUN to a context
+ * @sdev: SCSI device associated with LUN.
+ * @attach: Attach ioctl data structure.
+ *
+ * Creates a context and attaches LUN to it. A LUN can only be attached
+ * one time to a context (subsequent attaches for the same context/LUN pair
+ * are not supported). Additional LUNs can be attached to a context by
+ * specifying the 'reuse' flag defined in the cxlflash_ioctl.h header.
+ *
+ * Return: 0 on success, -errno on failure
+ */
+static int cxlflash_disk_attach(struct scsi_device *sdev,
+ struct dk_cxlflash_attach *attach)
+{
+ struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
+ struct afu *afu = cfg->afu;
+ struct llun_info *lli = sdev->hostdata;
+ struct glun_info *gli = lli->parent;
+ struct cxl_ioctl_start_work *work;
+ struct ctx_info *ctxi = NULL;
+ struct lun_access *lun_access = NULL;
+ int rc = 0;
+ u32 perms;
+ int ctxid = -1;
+ u64 rctxid = 0UL;
+ struct file *file;
+
+ struct cxl_context *ctx;
+
+ int fd = -1;
+
+ /* On first attach set fileops */
+ if (atomic_read(&cfg->num_user_contexts) == 0)
+ cfg->cxl_fops = cxlflash_cxl_fops;
+
+ if (attach->num_interrupts > 4) {
+ pr_err("%s: Cannot support this many interrupts %llu\n",
+ __func__, attach->num_interrupts);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ if (gli->max_lba == 0) {
+ pr_debug("%s: No capacity info yet for this LUN (%016llX)\n",
+ __func__, lli->lun_id[sdev->channel]);
+ rc = read_cap16(sdev, lli);
+ if (rc) {
+ pr_err("%s: Invalid device! (%d)\n", __func__, rc);
+ rc = -ENODEV;
+ goto out;
+ }
+ pr_debug("%s: LBA = %016llX\n", __func__, gli->max_lba);
+ pr_debug("%s: BLK_LEN = %08X\n", __func__, gli->blk_len);
+ }
+
+ if (attach->hdr.flags & DK_CXLFLASH_ATTACH_REUSE_CONTEXT) {
+ rctxid = attach->context_id;
+ ctxi = get_context(cfg, rctxid, NULL, 0);
+ if (!ctxi) {
+ pr_err("%s: Bad context! (%016llX)\n",
+ __func__, rctxid);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ list_for_each_entry(lun_access, &ctxi->luns, list)
+ if (lun_access->lli == lli) {
+ pr_err("%s: Already attached!\n", __func__);
+ rc = -EINVAL;
+ goto out;
+ }
+ }
+
+ lun_access = kzalloc(sizeof(*lun_access), GFP_KERNEL);
+ if (unlikely(!lun_access)) {
+ pr_err("%s: Unable to allocate lun_access!\n", __func__);
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ lun_access->lli = lli;
+ lun_access->sdev = sdev;
+
+ /* Non-NULL context indicates reuse */
+ if (ctxi) {
+ pr_debug("%s: Reusing context for LUN! (%016llX)\n",
+ __func__, rctxid);
+ list_add(&lun_access->list, &ctxi->luns);
+ fd = ctxi->lfd;
+ goto out_attach;
+ }
+
+ ctx = cxl_dev_context_init(cfg->dev);
+ if (unlikely(IS_ERR_OR_NULL(ctx))) {
+ pr_err("%s: Could not initialize context %p\n", __func__, ctx);
+ rc = -ENODEV;
+ goto err0;
+ }
+
+ ctxid = cxl_process_element(ctx);
+ if (unlikely((ctxid > MAX_CONTEXT) || (ctxid < 0))) {
+ pr_err("%s: ctxid (%d) invalid!\n", __func__, ctxid);
+ rc = -EPERM;
+ goto err1;
+ }
+
+ file = cxl_get_fd(ctx, &cfg->cxl_fops, &fd);
+ if (unlikely(fd < 0)) {
+ rc = -ENODEV;
+ pr_err("%s: Could not get file descriptor\n", __func__);
+ goto err1;
+ }
+
+ /* Translate read/write O_* flags from fcntl.h to AFU permission bits */
+ perms = SISL_RHT_PERM(attach->hdr.flags + 1);
+
+ ctxi = create_context(cfg, ctx, ctxid, fd, file, perms);
+ if (unlikely(!ctxi)) {
+ pr_err("%s: Failed to create context! (%d)\n", __func__, ctxid);
+ goto err2;
+ }
+
+ work = &ctxi->work;
+ work->num_interrupts = attach->num_interrupts;
+ work->flags = CXL_START_WORK_NUM_IRQS;
+
+ rc = cxl_start_work(ctx, work);
+ if (unlikely(rc)) {
+ pr_debug("%s: Could not start context rc=%d\n", __func__, rc);
+ goto err3;
+ }
+
+ rc = afu_attach(cfg, ctxi);
+ if (unlikely(rc)) {
+ pr_err("%s: Could not attach AFU rc %d\n", __func__, rc);
+ goto err4;
+ }
+
+ /*
+ * No error paths after this point. Once the fd is installed it's
+ * visible to user space and can't be undone safely on this thread.
+ */
+ list_add(&lun_access->list, &ctxi->luns);
+ mutex_lock(&cfg->ctx_tbl_list_mutex);
+ cfg->ctx_tbl[ctxid] = ctxi;
+ mutex_unlock(&cfg->ctx_tbl_list_mutex);
+ fd_install(fd, file);
+
+out_attach:
+ attach->hdr.return_flags = 0;
+ attach->context_id = ctxi->ctxid;
+ attach->block_size = gli->blk_len;
+ attach->mmio_size = sizeof(afu->afu_map->hosts[0].harea);
+ attach->last_lba = gli->max_lba;
+ attach->max_xfer = (sdev->host->max_sectors * 512) / gli->blk_len;
+
+out:
+ attach->adap_fd = fd;
+
+ if (ctxi)
+ mutex_unlock(&ctxi->mutex);
+
+ pr_debug("%s: returning ctxid=%d fd=%d bs=%lld rc=%d llba=%lld\n",
+ __func__, ctxid, fd, attach->block_size, rc, attach->last_lba);
+ return rc;
+
+err4:
+ cxl_stop_context(ctx);
+err3:
+ destroy_context(cfg, ctxi);
+err2:
+ /*
+ * Here, we're overriding the fops with a dummy all-NULL fops because
+ * fput() calls the release fop, which will cause us to mistakenly
+ * call into the CXL code. Rather than try to add yet more complexity
+ * to that routine (cxlflash_cxl_release) we should try to fix the
+ * issue here.
+ */
+ file->f_op = &null_fops;
+ fput(file);
+ put_unused_fd(fd);
+ fd = -1;
+err1:
+ cxl_release_context(ctx);
+err0:
+ kfree(lun_access);
+ goto out;
+}
+
+/**
+ * cxlflash_manage_lun() - handles lun management activities
+ * @sdev: SCSI device associated with LUN.
+ * @manage: Manage ioctl data structure.
+ *
+ * This routine is used to notify the driver about a LUN's WWID and associate
+ * SCSI devices (sdev) with a global LUN instance. Additionally it serves to
+ * change a LUN's operating mode: legacy or superpipe.
+ *
+ * Return: 0 on success, -errno on failure
+ */
+static int cxlflash_manage_lun(struct scsi_device *sdev,
+ struct dk_cxlflash_manage_lun *manage)
+{
+ int rc = 0;
+ struct llun_info *lli = NULL;
+ u64 flags = manage->hdr.flags;
+ u32 chan = sdev->channel;
+
+ lli = lookup_lun(sdev, manage->wwid);
+ pr_debug("%s: ENTER: WWID = %016llX%016llX, flags = %016llX li = %p\n",
+ __func__, get_unaligned_le64(&manage->wwid[0]),
+ get_unaligned_le64(&manage->wwid[8]),
+ manage->hdr.flags, lli);
+ if (unlikely(!lli)) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ if (flags & DK_CXLFLASH_MANAGE_LUN_ENABLE_SUPERPIPE) {
+ if (lli->newly_created)
+ lli->port_sel = CHAN2PORT(chan);
+ else
+ lli->port_sel = BOTH_PORTS;
+ /* Store off lun in unpacked, AFU-friendly format */
+ lli->lun_id[chan] = lun_to_lunid(sdev->lun);
+ sdev->hostdata = lli;
+ } else if (flags & DK_CXLFLASH_MANAGE_LUN_DISABLE_SUPERPIPE) {
+ if (lli->parent->mode != MODE_NONE)
+ rc = -EBUSY;
+ else
+ sdev->hostdata = NULL;
+ }
+
+out:
+ pr_debug("%s: returning rc=%d\n", __func__, rc);
+ return rc;
+}
+
+/**
+ * recover_context() - recovers a context in error
+ * @cfg: Internal structure associated with the host.
+ * @ctxi: Context to release.
+ *
+ * Restablishes the state for a context-in-error.
+ *
+ * Return: 0 on success, -errno on failure
+ */
+static int recover_context(struct cxlflash_cfg *cfg, struct ctx_info *ctxi)
+{
+ int rc = 0;
+ int old_fd, fd = -1;
+ int ctxid = -1;
+ struct file *file;
+ struct cxl_context *ctx;
+ struct afu *afu = cfg->afu;
+
+ ctx = cxl_dev_context_init(cfg->dev);
+ if (unlikely(IS_ERR_OR_NULL(ctx))) {
+ pr_err("%s: Could not initialize context %p\n", __func__, ctx);
+ rc = -ENODEV;
+ goto out;
+ }
+
+ ctxid = cxl_process_element(ctx);
+ if (unlikely((ctxid > MAX_CONTEXT) || (ctxid < 0))) {
+ pr_err("%s: ctxid (%d) invalid!\n", __func__, ctxid);
+ rc = -EPERM;
+ goto err1;
+ }
+
+ file = cxl_get_fd(ctx, &cfg->cxl_fops, &fd);
+ if (unlikely(fd < 0)) {
+ rc = -ENODEV;
+ pr_err("%s: Could not get file descriptor\n", __func__);
+ goto err1;
+ }
+
+ rc = cxl_start_work(ctx, &ctxi->work);
+ if (unlikely(rc)) {
+ pr_err("%s: Could not start context rc=%d\n", __func__, rc);
+ goto err2;
+ }
+
+ /* Update with new MMIO area based on updated context id */
+ ctxi->ctrl_map = &afu->afu_map->ctrls[ctxid].ctrl;
+
+ rc = afu_attach(cfg, ctxi);
+ if (rc) {
+ pr_err("%s: Could not attach AFU rc %d\n", __func__, rc);
+ goto err3;
+ }
+
+ /*
+ * No error paths after this point. Once the fd is installed it's
+ * visible to user space and can't be undone safely on this thread.
+ */
+ old_fd = ctxi->lfd;
+ ctxi->ctxid = ENCODE_CTXID(ctxi, ctxid);
+ ctxi->lfd = fd;
+ ctxi->ctx = ctx;
+ ctxi->file = file;
+
+ /* Put context back in table (note the reinit of the context list) */
+ mutex_lock(&cfg->ctx_tbl_list_mutex);
+ list_del_init(&ctxi->list);
+ cfg->ctx_tbl[ctxid] = ctxi;
+ mutex_unlock(&cfg->ctx_tbl_list_mutex);
+ fd_install(fd, file);
+
+ /* Release the original adapter fd and associated CXL resources */
+ sys_close(old_fd);
+out:
+ pr_debug("%s: returning ctxid=%d fd=%d rc=%d\n",
+ __func__, ctxid, fd, rc);
+ return rc;
+
+err3:
+ cxl_stop_context(ctx);
+err2:
+ fput(file);
+ put_unused_fd(fd);
+err1:
+ cxl_release_context(ctx);
+ goto out;
+}
+
+/**
+ * check_eeh() - checks and responds to the current EEH state
+ * @cfg: Internal structure associated with the host.
+ *
+ * This routine can block and should only be used on process context.
+ * Note that when waking up from waiting on the EEH event to clear,
+ * the state must be checked again in case another EEH has occurred or
+ * the previous event failed recovery.
+ *
+ * Return: 0 on success, -errno on failure
+ */
+static int check_eeh(struct cxlflash_cfg *cfg)
+{
+ int rc = 0;
+
+retry:
+ switch (cfg->eeh_active) {
+ case EEH_STATE_ACTIVE:
+ pr_debug("%s: EEH Active, going to wait...\n", __func__);
+ rc = wait_event_interruptible(cfg->eeh_waitq,
+ cfg->eeh_active !=
+ EEH_STATE_ACTIVE);
+ if (unlikely(rc))
+ goto out;
+ goto retry;
+ case EEH_STATE_FAILED:
+ pr_debug("%s: EEH Failed\n", __func__);
+ rc = -ENODEV;
+ goto out;
+ case EEH_STATE_NONE:
+ break;
+ }
+out:
+ return rc;
+}
+
+/**
+ * cxlflash_afu_recover() - initiates AFU recovery
+ * @sdev: SCSI device associated with LUN.
+ * @recover: Recover ioctl data structure.
+ *
+ * Because a user can detect an error condition before the kernel, it is
+ * quite possible for this routine to act as the kernel's EEH detection
+ * source (MMIO read of mbox_r). Because of this, there is a window of
+ * time where an EEH might have been detected but not yet 'serviced'
+ * (callback invoked, causing the EEH state to flip). To avoid looping
+ * in this routine during that window, a 1 second sleep is in place
+ * between the time the MMIO failure is detected and the time a wait
+ * on the EEH wait queue is attempted.
+ *
+ * Return: 0 on success, -errno on failure
+ */
+static int cxlflash_afu_recover(struct scsi_device *sdev,
+ struct dk_cxlflash_recover_afu *recover)
+{
+ struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
+ struct llun_info *lli = sdev->hostdata;
+ struct afu *afu = cfg->afu;
+ struct ctx_info *ctxi = NULL;
+ u64 ctxid = DECODE_CTXID(recover->context_id),
+ rctxid = recover->context_id;
+ long reg;
+ int rc = 0;
+
+ pr_debug("%s: reason 0x%016llX rctxid=%016llX\n", __func__,
+ recover->reason, rctxid);
+
+retry:
+ /* Ensure that this process is attached to the context */
+ ctxi = get_context(cfg, rctxid, lli, CTX_CTRL_ERR_FALLBACK);
+ if (unlikely(!ctxi)) {
+ pr_err("%s: Bad context! (%llu)\n", __func__, ctxid);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ if (ctxi->err_recovery_active) {
+ rc = recover_context(cfg, ctxi);
+ if (unlikely(rc)) {
+ pr_err("%s: Recovery failed for context %llu (rc=%d)\n",
+ __func__, ctxid, rc);
+ goto out;
+ }
+
+ ctxi->err_recovery_active = false;
+ recover->context_id = ctxi->ctxid;
+ recover->adap_fd = ctxi->lfd;
+ recover->mmio_size = sizeof(afu->afu_map->hosts[0].harea);
+ recover->hdr.return_flags |=
+ DK_CXLFLASH_RECOVER_AFU_CONTEXT_RESET;
+ goto out;
+ }
+
+ /* Test if in error state */
+ reg = readq_be(&afu->ctrl_map->mbox_r);
+ if (reg == -1) {
+ pr_info("%s: MMIO read fail! Wait for recovery...\n", __func__);
+ mutex_unlock(&ctxi->mutex);
+ ctxi = NULL;
+ ssleep(1);
+ rc = check_eeh(cfg);
+ if (unlikely(rc))
+ goto out;
+ goto retry;
+ }
+
+ pr_debug("%s: MMIO working, no recovery required!\n", __func__);
+out:
+ if (likely(ctxi))
+ mutex_unlock(&ctxi->mutex);
+ return rc;
+}
+
+/**
+ * process_sense() - evaluates and processes sense data
+ * @sdev: SCSI device associated with LUN.
+ * @verify: Verify ioctl data structure.
+ *
+ * Return: 0 on success, -errno on failure
+ */
+static int process_sense(struct scsi_device *sdev,
+ struct dk_cxlflash_verify *verify)
+{
+ struct request_sense_data *sense_data = (struct request_sense_data *)
+ &verify->sense_data;
+ struct llun_info *lli = sdev->hostdata;
+ struct glun_info *gli = lli->parent;
+ struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
+ u64 prev_lba = gli->max_lba;
+ int rc = 0;
+
+ switch (sense_data->sense_key) {
+ case NO_SENSE:
+ case RECOVERED_ERROR:
+ /* fall through */
+ case NOT_READY:
+ break;
+ case UNIT_ATTENTION:
+ switch (sense_data->add_sense_key) {
+ case 0x29: /* Power on Reset or Device Reset */
+ /* fall through */
+ case 0x2A: /* Device settings/capacity changed */
+ rc = read_cap16(sdev, lli);
+ if (rc) {
+ rc = -ENODEV;
+ break;
+ }
+ if (prev_lba != gli->max_lba)
+ pr_debug("%s: Capacity changed old=%lld "
+ "new=%lld\n", __func__, prev_lba,
+ gli->max_lba);
+ break;
+ case 0x3F: /* Report LUNs changed, Rescan. */
+ scsi_scan_host(cfg->host);
+ break;
+ default:
+ rc = -EIO;
+ break;
+ }
+ break;
+ default:
+ rc = -EIO;
+ break;
+ }
+ pr_debug("%s: sense_key %x asc %x rc %d\n", __func__,
+ sense_data->sense_key, sense_data->add_sense_key, rc);
+ return rc;
+}
+
+/**
+ * cxlflash_disk_verify() - verifies a LUN is the same and handle size changes
+ * @sdev: SCSI device associated with LUN.
+ * @verify: Verify ioctl data structure.
+ *
+ * Return: 0 on success, -errno on failure
+ */
+static int cxlflash_disk_verify(struct scsi_device *sdev,
+ struct dk_cxlflash_verify *verify)
+{
+ int rc = 0;
+ struct ctx_info *ctxi = NULL;
+ struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
+ struct llun_info *lli = sdev->hostdata;
+ struct glun_info *gli = lli->parent;
+ struct sisl_rht_entry *rhte = NULL;
+ res_hndl_t rhndl = verify->rsrc_handle;
+ u64 ctxid = DECODE_CTXID(verify->context_id),
+ rctxid = verify->context_id;
+ u64 last_lba = 0;
+
+ pr_debug("%s: ctxid=%llu rhndl=0x%llx, hint=0x%llx\n",
+ __func__, ctxid, verify->rsrc_handle, verify->hint);
+
+ ctxi = get_context(cfg, rctxid, lli, 0);
+ if (unlikely(!ctxi)) {
+ pr_err("%s: Bad context! (%llu)\n", __func__, ctxid);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ rhte = get_rhte(ctxi, rhndl, lli);
+ if (unlikely(!rhte)) {
+ pr_err("%s: Bad resource handle! (%d)\n", __func__, rhndl);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ /*
+ * Look at the hint/sense to see if it requires us to redrive
+ * inquiry (i.e. the Unit attention is due to the WWN changing).
+ */
+ if (verify->hint & DK_CXLFLASH_VERIFY_HINT_SENSE) {
+ rc = process_sense(sdev, verify);
+ if (unlikely(rc)) {
+ pr_err("%s: Failed to validate sense data! (%d)\n",
+ __func__, rc);
+ goto out;
+ }
+ }
+
+ switch (gli->mode) {
+ case MODE_PHYSICAL:
+ last_lba = gli->max_lba;
+ break;
+ default:
+ BUG();
+ }
+
+ verify->last_lba = last_lba;
+
+out:
+ if (likely(ctxi))
+ mutex_unlock(&ctxi->mutex);
+ pr_debug("%s: returning rc=%d llba=%lld\n",
+ __func__, rc, verify->last_lba);
+ return rc;
+}
+
+/**
+ * decode_ioctl() - translates an encoded ioctl to an easily identifiable string
+ * @cmd: The ioctl command to decode.
+ *
+ * Return: A string identifying the decoded ioctl.
+ */
+static char *decode_ioctl(int cmd)
+{
+ switch (cmd) {
+ case DK_CXLFLASH_ATTACH:
+ return __stringify_1(DK_CXLFLASH_ATTACH);
+ case DK_CXLFLASH_USER_DIRECT:
+ return __stringify_1(DK_CXLFLASH_USER_DIRECT);
+ case DK_CXLFLASH_RELEASE:
+ return __stringify_1(DK_CXLFLASH_RELEASE);
+ case DK_CXLFLASH_DETACH:
+ return __stringify_1(DK_CXLFLASH_DETACH);
+ case DK_CXLFLASH_VERIFY:
+ return __stringify_1(DK_CXLFLASH_VERIFY);
+ case DK_CXLFLASH_RECOVER_AFU:
+ return __stringify_1(DK_CXLFLASH_RECOVER_AFU);
+ case DK_CXLFLASH_MANAGE_LUN:
+ return __stringify_1(DK_CXLFLASH_MANAGE_LUN);
+ }
+
+ return "UNKNOWN";
+}
+
+/**
+ * cxlflash_disk_direct_open() - opens a direct (physical) disk
+ * @sdev: SCSI device associated with LUN.
+ * @arg: UDirect ioctl data structure.
+ *
+ * On successful return, the user is informed of the resource handle
+ * to be used to identify the direct lun and the size (in blocks) of
+ * the direct lun in last LBA format.
+ *
+ * Return: 0 on success, -errno on failure
+ */
+static int cxlflash_disk_direct_open(struct scsi_device *sdev, void *arg)
+{
+ struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
+ struct afu *afu = cfg->afu;
+ struct llun_info *lli = sdev->hostdata;
+ struct glun_info *gli = lli->parent;
+
+ struct dk_cxlflash_udirect *pphys = (struct dk_cxlflash_udirect *)arg;
+
+ u64 ctxid = DECODE_CTXID(pphys->context_id),
+ rctxid = pphys->context_id;
+ u64 lun_size = 0;
+ u64 last_lba = 0;
+ u64 rsrc_handle = -1;
+ u32 port = CHAN2PORT(sdev->channel);
+
+ int rc = 0;
+
+ struct ctx_info *ctxi = NULL;
+ struct sisl_rht_entry *rhte = NULL;
+
+ pr_debug("%s: ctxid=%llu ls=0x%llx\n", __func__, ctxid, lun_size);
+
+ rc = cxlflash_lun_attach(gli, MODE_PHYSICAL);
+ if (unlikely(rc)) {
+ pr_err("%s: Failed to attach to LUN! (PHYSICAL)\n", __func__);
+ goto out;
+ }
+
+ ctxi = get_context(cfg, rctxid, lli, 0);
+ if (unlikely(!ctxi)) {
+ pr_err("%s: Bad context! (%llu)\n", __func__, ctxid);
+ rc = -EINVAL;
+ goto err1;
+ }
+
+ rhte = rhte_checkout(ctxi, lli);
+ if (unlikely(!rhte)) {
+ pr_err("%s: too many opens for this context\n", __func__);
+ rc = -EMFILE; /* too many opens */
+ goto err1;
+ }
+
+ rsrc_handle = (rhte - ctxi->rht_start);
+
+ rht_format1(rhte, lli->lun_id[sdev->channel], ctxi->rht_perms, port);
+ cxlflash_afu_sync(afu, ctxid, rsrc_handle, AFU_LW_SYNC);
+
+ last_lba = gli->max_lba;
+ pphys->hdr.return_flags = 0;
+ pphys->last_lba = last_lba;
+ pphys->rsrc_handle = rsrc_handle;
+
+out:
+ if (likely(ctxi))
+ mutex_unlock(&ctxi->mutex);
+ pr_debug("%s: returning handle 0x%llx rc=%d llba %lld\n",
+ __func__, rsrc_handle, rc, last_lba);
+ return rc;
+
+err1:
+ cxlflash_lun_detach(gli);
+ goto out;
+}
+
+/**
+ * ioctl_common() - common IOCTL handler for driver
+ * @sdev: SCSI device associated with LUN.
+ * @cmd: IOCTL command.
+ *
+ * Handles common fencing operations that are valid for multiple ioctls. In
+ * the event of an EEH failure, allow through ioctls that are cleanup oriented
+ * in nature.
+ *
+ * Return: 0 on success, -errno on failure
+ */
+static int ioctl_common(struct scsi_device *sdev, int cmd)
+{
+ struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
+ struct llun_info *lli = sdev->hostdata;
+ int rc = 0;
+
+ if (unlikely(!lli)) {
+ pr_debug("%s: Unknown LUN\n", __func__);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ rc = check_eeh(cfg);
+ if (unlikely(rc) && (cfg->eeh_active == EEH_STATE_FAILED)) {
+ switch (cmd) {
+ case DK_CXLFLASH_VLUN_RESIZE:
+ case DK_CXLFLASH_RELEASE:
+ case DK_CXLFLASH_DETACH:
+ pr_debug("%s: Command override! (%d)\n", __func__, rc);
+ rc = 0;
+ break;
+ }
+ }
+out:
+ return rc;
+}
+
+/**
+ * cxlflash_ioctl() - IOCTL handler for driver
+ * @sdev: SCSI device associated with LUN.
+ * @cmd: IOCTL command.
+ * @arg: Userspace ioctl data structure.
+ *
+ * Return: 0 on success, -errno on failure
+ */
+int cxlflash_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
+{
+ typedef int (*sioctl) (struct scsi_device *, void *);
+
+ struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
+ struct afu *afu = cfg->afu;
+ struct dk_cxlflash_hdr *hdr;
+ char buf[MAX_CXLFLASH_IOCTL_SZ];
+ size_t size = 0;
+ bool known_ioctl = false;
+ int idx;
+ int rc = 0;
+ struct Scsi_Host *shost = sdev->host;
+ sioctl do_ioctl = NULL;
+
+ static const struct {
+ size_t size;
+ sioctl ioctl;
+ } ioctl_tbl[] = { /* NOTE: order matters here */
+ {sizeof(struct dk_cxlflash_attach), (sioctl)cxlflash_disk_attach},
+ {sizeof(struct dk_cxlflash_udirect), cxlflash_disk_direct_open},
+ {sizeof(struct dk_cxlflash_release), (sioctl)cxlflash_disk_release},
+ {sizeof(struct dk_cxlflash_detach), (sioctl)cxlflash_disk_detach},
+ {sizeof(struct dk_cxlflash_verify), (sioctl)cxlflash_disk_verify},
+ {sizeof(struct dk_cxlflash_recover_afu), (sioctl)cxlflash_afu_recover},
+ {sizeof(struct dk_cxlflash_manage_lun), (sioctl)cxlflash_manage_lun},
+ };
+
+ /* Restrict command set to physical support only for internal LUN */
+ if (afu->internal_lun)
+ switch (cmd) {
+ case DK_CXLFLASH_RELEASE:
+ pr_err("%s: %s not supported for lun_mode=%d\n",
+ __func__, decode_ioctl(cmd), afu->internal_lun);
+ rc = -EINVAL;
+ goto cxlflash_ioctl_exit;
+ }
+
+ switch (cmd) {
+ case DK_CXLFLASH_ATTACH:
+ case DK_CXLFLASH_USER_DIRECT:
+ case DK_CXLFLASH_RELEASE:
+ case DK_CXLFLASH_DETACH:
+ case DK_CXLFLASH_VERIFY:
+ case DK_CXLFLASH_RECOVER_AFU:
+ pr_debug("%s: %s (%08X) on dev(%d/%d/%d/%llu)\n", __func__,
+ decode_ioctl(cmd), cmd, shost->host_no, sdev->channel,
+ sdev->id, sdev->lun);
+ rc = ioctl_common(sdev, cmd);
+ if (unlikely(rc))
+ goto cxlflash_ioctl_exit;
+
+ /* fall through */
+
+ case DK_CXLFLASH_MANAGE_LUN:
+ known_ioctl = true;
+ idx = _IOC_NR(cmd) - _IOC_NR(DK_CXLFLASH_ATTACH);
+ size = ioctl_tbl[idx].size;
+ do_ioctl = ioctl_tbl[idx].ioctl;
+
+ if (likely(do_ioctl))
+ break;
+
+ /* fall through */
+ default:
+ rc = -EINVAL;
+ goto cxlflash_ioctl_exit;
+ }
+
+ if (unlikely(copy_from_user(&buf, arg, size))) {
+ pr_err("%s: copy_from_user() fail! "
+ "size=%lu cmd=%d (%s) arg=%p\n",
+ __func__, size, cmd, decode_ioctl(cmd), arg);
+ rc = -EFAULT;
+ goto cxlflash_ioctl_exit;
+ }
+
+ hdr = (struct dk_cxlflash_hdr *)&buf;
+ if (hdr->version != 0) {
+ pr_err("%s: Version %u not supported for %s\n",
+ __func__, hdr->version, decode_ioctl(cmd));
+ rc = -EINVAL;
+ goto cxlflash_ioctl_exit;
+ }
+
+ rc = do_ioctl(sdev, (void *)&buf);
+ if (likely(!rc))
+ if (unlikely(copy_to_user(arg, &buf, size))) {
+ pr_err("%s: copy_to_user() fail! "
+ "size=%lu cmd=%d (%s) arg=%p\n",
+ __func__, size, cmd, decode_ioctl(cmd), arg);
+ rc = -EFAULT;
+ }
+
+ /* fall through to exit */
+
+cxlflash_ioctl_exit:
+ if (unlikely(rc && known_ioctl))
+ pr_err("%s: ioctl %s (%08X) on dev(%d/%d/%d/%llu) "
+ "returned rc %d\n", __func__,
+ decode_ioctl(cmd), cmd, shost->host_no,
+ sdev->channel, sdev->id, sdev->lun, rc);
+ else
+ pr_debug("%s: ioctl %s (%08X) on dev(%d/%d/%d/%llu) "
+ "returned rc %d\n", __func__, decode_ioctl(cmd),
+ cmd, shost->host_no, sdev->channel, sdev->id,
+ sdev->lun, rc);
+ return rc;
+}
+
diff --git a/drivers/scsi/cxlflash/superpipe.h b/drivers/scsi/cxlflash/superpipe.h
new file mode 100644
index 0000000..6166527
--- /dev/null
+++ b/drivers/scsi/cxlflash/superpipe.h
@@ -0,0 +1,142 @@
+/*
+ * CXL Flash Device Driver
+ *
+ * Written by: Manoj N. Kumar <manoj@linux.vnet.ibm.com>, IBM Corporation
+ * Matthew R. Ochs <mrochs@linux.vnet.ibm.com>, IBM Corporation
+ *
+ * Copyright (C) 2015 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _CXLFLASH_SUPERPIPE_H
+#define _CXLFLASH_SUPERPIPE_H
+
+#define MC_DISCOVERY_TIMEOUT 5 /* 5 secs */
+
+#define CHAN2PORT(_x) ((_x) + 1)
+#define PORT2CHAN(_x) ((_x) - 1)
+
+enum lun_mode {
+ MODE_NONE = 0,
+ MODE_PHYSICAL
+};
+
+/* SCSI Defines */
+
+struct request_sense_data {
+ uint8_t err_code; /* error class and code */
+ uint8_t rsvd0;
+ uint8_t sense_key;
+#define CXLFLASH_VENDOR_UNIQUE 0x09
+#define CXLFLASH_EQUAL_CMD 0x0C
+ uint8_t sense_byte0;
+ uint8_t sense_byte1;
+ uint8_t sense_byte2;
+ uint8_t sense_byte3;
+ uint8_t add_sense_length;
+ uint8_t add_sense_byte0;
+ uint8_t add_sense_byte1;
+ uint8_t add_sense_byte2;
+ uint8_t add_sense_byte3;
+ uint8_t add_sense_key;
+ uint8_t add_sense_qualifier;
+ uint8_t fru;
+ uint8_t flag_byte;
+ uint8_t field_ptrM;
+ uint8_t field_ptrL;
+};
+
+/* Global (entire driver, spans adapters) lun_info structure */
+struct glun_info {
+ u64 max_lba; /* from read cap(16) */
+ u32 blk_len; /* from read cap(16) */
+ enum lun_mode mode; /* NONE, PHYSICAL */
+ int users; /* Number of users w/ references to LUN */
+
+ u8 wwid[16];
+
+ spinlock_t slock;
+
+ struct list_head list;
+};
+
+/* Local (per-adapter) lun_info structure */
+struct llun_info {
+ u64 lun_id[CXLFLASH_NUM_FC_PORTS]; /* from REPORT_LUNS */
+ u32 host_no; /* host_no from Scsi_host */
+ u32 port_sel; /* What port to use for this LUN */
+ bool newly_created; /* Whether the LUN was just discovered */
+ bool in_table; /* Whether a LUN table entry was created */
+
+ u8 wwid[16]; /* Keep a duplicate copy here? */
+
+ struct glun_info *parent; /* Pointer to entry in global lun structure */
+ struct scsi_device *sdev;
+ struct list_head list;
+};
+
+struct lun_access {
+ struct llun_info *lli;
+ struct scsi_device *sdev;
+ struct list_head list;
+};
+
+enum ctx_ctrl {
+ CTX_CTRL_CLONE = (1 << 1),
+ CTX_CTRL_ERR = (1 << 2),
+ CTX_CTRL_ERR_FALLBACK = (1 << 3),
+ CTX_CTRL_NOPID = (1 << 4),
+ CTX_CTRL_FILE = (1 << 5)
+};
+
+#define ENCODE_CTXID(_ctx, _id) (((((u64)_ctx) & 0xFFFFFFFF0) << 28) | _id)
+#define DECODE_CTXID(_val) (_val & 0xFFFFFFFF)
+
+struct ctx_info {
+ struct sisl_ctrl_map *ctrl_map; /* initialized at startup */
+ struct sisl_rht_entry *rht_start; /* 1 page (req'd for alignment),
+ alloc/free on attach/detach */
+ u32 rht_out; /* Number of checked out RHT entries */
+ u32 rht_perms; /* User-defined permissions for RHT entries */
+ struct llun_info **rht_lun; /* Mapping of RHT entries to LUNs */
+
+ struct cxl_ioctl_start_work work;
+ u64 ctxid;
+ int lfd;
+ pid_t pid;
+ bool err_recovery_active;
+ struct mutex mutex; /* Context protection */
+ struct cxl_context *ctx;
+ struct list_head luns; /* LUNs attached to this context */
+ const struct vm_operations_struct *cxl_mmap_vmops;
+ struct file *file;
+ struct list_head list; /* Link contexts in error recovery */
+};
+
+struct cxlflash_global {
+ spinlock_t slock;
+ struct list_head gluns;/* list of glun_info structs */
+ struct page *err_page; /* One page of all 0xF for error notification */
+};
+
+
+int cxlflash_disk_release(struct scsi_device *, struct dk_cxlflash_release *);
+int _cxlflash_disk_release(struct scsi_device *, struct ctx_info *,
+ struct dk_cxlflash_release *);
+
+int cxlflash_lun_attach(struct glun_info *, enum lun_mode);
+void cxlflash_lun_detach(struct glun_info *);
+
+struct ctx_info *get_context(struct cxlflash_cfg *, u64, void *, enum ctx_ctrl);
+
+struct sisl_rht_entry *get_rhte(struct ctx_info *, res_hndl_t,
+ struct llun_info *);
+
+struct sisl_rht_entry *rhte_checkout(struct ctx_info *, struct llun_info *);
+void rhte_checkin(struct ctx_info *, struct sisl_rht_entry *);
+
+#endif /* ifndef _CXLFLASH_SUPERPIPE_H */
diff --git a/include/uapi/scsi/Kbuild b/include/uapi/scsi/Kbuild
index 75746d5..d791e0a 100644
--- a/include/uapi/scsi/Kbuild
+++ b/include/uapi/scsi/Kbuild
@@ -3,3 +3,4 @@ header-y += fc/
header-y += scsi_bsg_fc.h
header-y += scsi_netlink.h
header-y += scsi_netlink_fc.h
+header-y += cxlflash_ioctl.h
diff --git a/include/uapi/scsi/cxlflash_ioctl.h b/include/uapi/scsi/cxlflash_ioctl.h
new file mode 100644
index 0000000..bdaae75
--- /dev/null
+++ b/include/uapi/scsi/cxlflash_ioctl.h
@@ -0,0 +1,132 @@
+/*
+ * CXL Flash Device Driver
+ *
+ * Written by: Manoj N. Kumar <manoj@linux.vnet.ibm.com>, IBM Corporation
+ * Matthew R. Ochs <mrochs@linux.vnet.ibm.com>, IBM Corporation
+ *
+ * Copyright (C) 2015 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _CXLFLASH_IOCTL_H
+#define _CXLFLASH_IOCTL_H
+
+#include <linux/types.h>
+
+/*
+ * Structure and flag definitions CXL Flash superpipe ioctls
+ */
+
+struct dk_cxlflash_hdr {
+ __u16 version; /* Version data */
+ __u16 rsvd[3]; /* Reserved for future use */
+ __u64 flags; /* Input flags */
+ __u64 return_flags; /* Returned flags */
+};
+
+/*
+ * Notes:
+ * -----
+ * The 'context_id' field of all ioctl structures contains the context
+ * identifier for a context in the lower 32-bits (upper 32-bits are not
+ * to be used when identifying a context to the AFU). That said, the value
+ * in its entirety (all 64-bits) is to be treated as an opaque cookie and
+ * should be presented as such when issuing ioctls.
+ *
+ * For DK_CXLFLASH_ATTACH ioctl, user specifies read/write access
+ * permissions via the O_RDONLY, O_WRONLY, and O_RDWR flags defined in
+ * the fcntl.h header file.
+ */
+#define DK_CXLFLASH_ATTACH_REUSE_CONTEXT 0x8000000000000000ULL
+
+struct dk_cxlflash_attach {
+ struct dk_cxlflash_hdr hdr; /* Common fields */
+ __u64 num_interrupts; /* Requested number of interrupts */
+ __u64 context_id; /* Returned context */
+ __u64 mmio_size; /* Returned size of MMIO area */
+ __u64 block_size; /* Returned block size, in bytes */
+ __u64 adap_fd; /* Returned adapter file descriptor */
+ __u64 last_lba; /* Returned last LBA on the device */
+ __u64 max_xfer; /* Returned max transfer size, blocks */
+};
+
+struct dk_cxlflash_detach {
+ struct dk_cxlflash_hdr hdr; /* Common fields */
+ __u64 context_id; /* Context to detach */
+};
+
+struct dk_cxlflash_udirect {
+ struct dk_cxlflash_hdr hdr; /* Common fields */
+ __u64 context_id; /* Context to own physical resources */
+ __u64 rsrc_handle; /* Returned resource handle */
+ __u64 last_lba; /* Returned last LBA on the device */
+};
+
+struct dk_cxlflash_release {
+ struct dk_cxlflash_hdr hdr; /* Common fields */
+ __u64 context_id; /* Context owning resources */
+ __u64 rsrc_handle; /* Resource handle to release */
+};
+
+#define DK_CXLFLASH_VERIFY_SENSE_LEN 18
+#define DK_CXLFLASH_VERIFY_HINT_SENSE 0x8000000000000000ULL
+
+struct dk_cxlflash_verify {
+ struct dk_cxlflash_hdr hdr; /* Common fields */
+ __u64 context_id; /* Context owning resources to verify */
+ __u64 rsrc_handle; /* Resource handle of LUN */
+ __u64 hint; /* Reasons for verify */
+ __u64 last_lba; /* Returned last LBA of device */
+ __u8 sense_data[DK_CXLFLASH_VERIFY_SENSE_LEN]; /* SCSI sense data */
+ __u8 pad[6]; /* Pad to next 8-byte boundary */
+};
+
+#define DK_CXLFLASH_RECOVER_AFU_CONTEXT_RESET 0x8000000000000000ULL
+
+struct dk_cxlflash_recover_afu {
+ struct dk_cxlflash_hdr hdr; /* Common fields */
+ __u64 reason; /* Reason for recovery request */
+ __u64 context_id; /* Context to recover / updated ID */
+ __u64 mmio_size; /* Returned size of MMIO area */
+ __u64 adap_fd; /* Returned adapter file descriptor */
+};
+
+#define DK_CXLFLASH_MANAGE_LUN_WWID_LEN 16
+#define DK_CXLFLASH_MANAGE_LUN_ENABLE_SUPERPIPE 0x8000000000000000ULL
+#define DK_CXLFLASH_MANAGE_LUN_DISABLE_SUPERPIPE 0x4000000000000000ULL
+#define DK_CXLFLASH_MANAGE_LUN_ALL_PORTS_ACCESSIBLE 0x2000000000000000ULL
+
+struct dk_cxlflash_manage_lun {
+ struct dk_cxlflash_hdr hdr; /* Common fields */
+ __u8 wwid[DK_CXLFLASH_MANAGE_LUN_WWID_LEN]; /* Page83 WWID, NAA-6 */
+};
+
+union cxlflash_ioctls {
+ struct dk_cxlflash_attach attach;
+ struct dk_cxlflash_detach detach;
+ struct dk_cxlflash_udirect udirect;
+ struct dk_cxlflash_release release;
+ struct dk_cxlflash_verify verify;
+ struct dk_cxlflash_recover_afu recover_afu;
+ struct dk_cxlflash_manage_lun manage_lun;
+};
+
+#define MAX_CXLFLASH_IOCTL_SZ (sizeof(union cxlflash_ioctls))
+
+
+#define CXL_MAGIC 0xCA
+#define CXL_IOW(_n, _s) _IOW(CXL_MAGIC, _n, struct _s)
+
+#define DK_CXLFLASH_ATTACH CXL_IOW(0x80, dk_cxlflash_attach)
+#define DK_CXLFLASH_USER_DIRECT CXL_IOW(0x81, dk_cxlflash_udirect)
+#define DK_CXLFLASH_RELEASE CXL_IOW(0x84, dk_cxlflash_release)
+#define DK_CXLFLASH_DETACH CXL_IOW(0x85, dk_cxlflash_detach)
+#define DK_CXLFLASH_VERIFY CXL_IOW(0x86, dk_cxlflash_verify)
+#define DK_CXLFLASH_RECOVER_AFU CXL_IOW(0x88, dk_cxlflash_recover_afu)
+#define DK_CXLFLASH_MANAGE_LUN CXL_IOW(0x89, dk_cxlflash_manage_lun)
+
+#endif /* ifndef _CXLFLASH_IOCTL_H */
--
2.1.0
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2015-07-16 23:27 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-07-16 23:26 [PATCH v2 2/3] cxlflash: Superpipe support Matthew R. Ochs
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.