* [PATCH 0/3] ARM: UniPhier: update DTS and MAINTAINERS
@ 2015-07-25 7:23 ` Masahiro Yamada
0 siblings, 0 replies; 9+ messages in thread
From: Masahiro Yamada @ 2015-07-25 7:23 UTC (permalink / raw)
To: arm
Cc: Masahiro Yamada, Russell King, Arnd Bergmann, Joe Perches,
devicetree, Mauro Carvalho Chehab, Greg KH, Kumar Gala,
linux-kernel, Ian Campbell, Rob Herring, Andrew Morton,
Pawel Moll, Jiri Slaby, Mark Rutland, linux-arm-kernel
Hi Arnd and Olof,
The pinctrl drivers for UniPhier SoCs were accepted by Linus Walleij
into the linux-pinctrl subsystem.
Here is a small series I'd like you to merge into the ARM-SOC subsystem
to use my pinctrl drivers.
Masahiro Yamada (3):
ARM: dts: UniPhier: add pinctrl device nodes
ARM: dts: UniPhier: add UART and USB pinmux nodes
MAINTAINERS: add entries for UniPhier device trees and drivers
MAINTAINERS | 3 ++
arch/arm/boot/dts/uniphier-ph1-ld4.dtsi | 22 +++++++++
arch/arm/boot/dts/uniphier-ph1-pro4.dtsi | 20 ++++++++
arch/arm/boot/dts/uniphier-ph1-sld8.dtsi | 22 +++++++++
arch/arm/boot/dts/uniphier-pinctrl.dtsi | 85 ++++++++++++++++++++++++++++++++
5 files changed, 152 insertions(+)
create mode 100644 arch/arm/boot/dts/uniphier-pinctrl.dtsi
--
1.9.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 0/3] ARM: UniPhier: update DTS and MAINTAINERS
@ 2015-07-25 7:23 ` Masahiro Yamada
0 siblings, 0 replies; 9+ messages in thread
From: Masahiro Yamada @ 2015-07-25 7:23 UTC (permalink / raw)
To: linux-arm-kernel
Hi Arnd and Olof,
The pinctrl drivers for UniPhier SoCs were accepted by Linus Walleij
into the linux-pinctrl subsystem.
Here is a small series I'd like you to merge into the ARM-SOC subsystem
to use my pinctrl drivers.
Masahiro Yamada (3):
ARM: dts: UniPhier: add pinctrl device nodes
ARM: dts: UniPhier: add UART and USB pinmux nodes
MAINTAINERS: add entries for UniPhier device trees and drivers
MAINTAINERS | 3 ++
arch/arm/boot/dts/uniphier-ph1-ld4.dtsi | 22 +++++++++
arch/arm/boot/dts/uniphier-ph1-pro4.dtsi | 20 ++++++++
arch/arm/boot/dts/uniphier-ph1-sld8.dtsi | 22 +++++++++
arch/arm/boot/dts/uniphier-pinctrl.dtsi | 85 ++++++++++++++++++++++++++++++++
5 files changed, 152 insertions(+)
create mode 100644 arch/arm/boot/dts/uniphier-pinctrl.dtsi
--
1.9.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/3] ARM: dts: UniPhier: add pinctrl device nodes
2015-07-25 7:23 ` Masahiro Yamada
@ 2015-07-25 7:23 ` Masahiro Yamada
-1 siblings, 0 replies; 9+ messages in thread
From: Masahiro Yamada @ 2015-07-25 7:23 UTC (permalink / raw)
To: arm
Cc: Masahiro Yamada, Russell King, devicetree, Kumar Gala,
linux-kernel, Ian Campbell, Rob Herring, Pawel Moll,
Mark Rutland, linux-arm-kernel
Add the pinctrol device nodes for UniPhier PH1-LD4, PH1-Pro4,
and PH1-sLD8.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---
arch/arm/boot/dts/uniphier-ph1-ld4.dtsi | 6 ++++++
arch/arm/boot/dts/uniphier-ph1-pro4.dtsi | 6 ++++++
arch/arm/boot/dts/uniphier-ph1-sld8.dtsi | 6 ++++++
3 files changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
index 600a473..518eab7 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
@@ -148,6 +148,12 @@
interrupts = <0 82 4>;
};
+ pinctrl: pinctrl@5f801000 {
+ compatible = "socionext,ph1-ld4-pinctrl",
+ "syscon";
+ reg = <0x5f801000 0xe00>;
+ };
+
timer@60000200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x60000200 0x20>;
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
index 4598bb2..789bd48 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
@@ -148,6 +148,12 @@
interrupts = <0 81 4>;
};
+ pinctrl: pinctrl@5f801000 {
+ compatible = "socionext,ph1-pro4-pinctrl",
+ "syscon";
+ reg = <0x5f801000 0xe00>;
+ };
+
timer@60000200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x60000200 0x20>;
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
index 3255157..8dff3c4 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
@@ -148,6 +148,12 @@
interrupts = <0 82 4>;
};
+ pinctrl: pinctrl@5f801000 {
+ compatible = "socionext,ph1-sld8-pinctrl",
+ "syscon";
+ reg = <0x5f801000 0xe00>;
+ };
+
timer@60000200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x60000200 0x20>;
--
1.9.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 1/3] ARM: dts: UniPhier: add pinctrl device nodes
@ 2015-07-25 7:23 ` Masahiro Yamada
0 siblings, 0 replies; 9+ messages in thread
From: Masahiro Yamada @ 2015-07-25 7:23 UTC (permalink / raw)
To: linux-arm-kernel
Add the pinctrol device nodes for UniPhier PH1-LD4, PH1-Pro4,
and PH1-sLD8.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---
arch/arm/boot/dts/uniphier-ph1-ld4.dtsi | 6 ++++++
arch/arm/boot/dts/uniphier-ph1-pro4.dtsi | 6 ++++++
arch/arm/boot/dts/uniphier-ph1-sld8.dtsi | 6 ++++++
3 files changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
index 600a473..518eab7 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
@@ -148,6 +148,12 @@
interrupts = <0 82 4>;
};
+ pinctrl: pinctrl at 5f801000 {
+ compatible = "socionext,ph1-ld4-pinctrl",
+ "syscon";
+ reg = <0x5f801000 0xe00>;
+ };
+
timer at 60000200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x60000200 0x20>;
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
index 4598bb2..789bd48 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
@@ -148,6 +148,12 @@
interrupts = <0 81 4>;
};
+ pinctrl: pinctrl at 5f801000 {
+ compatible = "socionext,ph1-pro4-pinctrl",
+ "syscon";
+ reg = <0x5f801000 0xe00>;
+ };
+
timer at 60000200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x60000200 0x20>;
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
index 3255157..8dff3c4 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
@@ -148,6 +148,12 @@
interrupts = <0 82 4>;
};
+ pinctrl: pinctrl at 5f801000 {
+ compatible = "socionext,ph1-sld8-pinctrl",
+ "syscon";
+ reg = <0x5f801000 0xe00>;
+ };
+
timer at 60000200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x60000200 0x20>;
--
1.9.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 2/3] ARM: dts: UniPhier: add UART and USB pinmux nodes
2015-07-25 7:23 ` Masahiro Yamada
@ 2015-07-25 7:23 ` Masahiro Yamada
-1 siblings, 0 replies; 9+ messages in thread
From: Masahiro Yamada @ 2015-07-25 7:23 UTC (permalink / raw)
To: arm
Cc: Masahiro Yamada, Russell King, devicetree, Kumar Gala,
linux-kernel, Ian Campbell, Rob Herring, Pawel Moll,
Mark Rutland, linux-arm-kernel
The DT nodes in uniphier-pinctrl.dtsi provide the default pinctrl
settings that would be suitable for most boards. You can still
override them in your board DTS file if necessary.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---
arch/arm/boot/dts/uniphier-ph1-ld4.dtsi | 16 ++++++
arch/arm/boot/dts/uniphier-ph1-pro4.dtsi | 14 ++++++
arch/arm/boot/dts/uniphier-ph1-sld8.dtsi | 16 ++++++
arch/arm/boot/dts/uniphier-pinctrl.dtsi | 85 ++++++++++++++++++++++++++++++++
4 files changed, 131 insertions(+)
create mode 100644 arch/arm/boot/dts/uniphier-pinctrl.dtsi
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
index 518eab7..4add90b 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
@@ -89,6 +89,8 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006800 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
interrupts = <0 33 4>;
clocks = <&uart_clk>;
fifo-size = <64>;
@@ -98,6 +100,8 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006900 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
interrupts = <0 35 4>;
clocks = <&uart_clk>;
fifo-size = <64>;
@@ -107,6 +111,8 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006a00 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
interrupts = <0 37 4>;
clocks = <&uart_clk>;
fifo-size = <64>;
@@ -116,6 +122,8 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006b00 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
interrupts = <0 29 4>;
clocks = <&uart_clk>;
fifo-size = <64>;
@@ -131,6 +139,8 @@
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a800100 0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>;
interrupts = <0 80 4>;
};
@@ -138,6 +148,8 @@
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a810100 0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
interrupts = <0 81 4>;
};
@@ -145,6 +157,8 @@
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a820100 0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2>;
interrupts = <0 82 4>;
};
@@ -177,3 +191,5 @@
};
};
};
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
index 789bd48..d0ca4c8 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
@@ -96,6 +96,8 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006800 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
interrupts = <0 33 4>;
clocks = <&uart_clk>;
fifo-size = <64>;
@@ -105,6 +107,8 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006900 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
interrupts = <0 35 4>;
clocks = <&uart_clk>;
fifo-size = <64>;
@@ -114,6 +118,8 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006a00 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
interrupts = <0 37 4>;
clocks = <&uart_clk>;
fifo-size = <64>;
@@ -123,6 +129,8 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006b00 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
interrupts = <0 29 4>;
clocks = <&uart_clk>;
fifo-size = <64>;
@@ -138,6 +146,8 @@
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a800100 0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2>;
interrupts = <0 80 4>;
};
@@ -145,6 +155,8 @@
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a810100 0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb3>;
interrupts = <0 81 4>;
};
@@ -177,3 +189,5 @@
};
};
};
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
index 8dff3c4..3ead910 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
@@ -89,6 +89,8 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006800 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
interrupts = <0 33 4>;
clocks = <&uart_clk>;
fifo-size = <64>;
@@ -98,6 +100,8 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006900 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
interrupts = <0 35 4>;
clocks = <&uart_clk>;
fifo-size = <64>;
@@ -107,6 +111,8 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006a00 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
interrupts = <0 37 4>;
clocks = <&uart_clk>;
fifo-size = <64>;
@@ -116,6 +122,8 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006b00 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
interrupts = <0 29 4>;
clocks = <&uart_clk>;
fifo-size = <64>;
@@ -131,6 +139,8 @@
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a800100 0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>;
interrupts = <0 80 4>;
};
@@ -138,6 +148,8 @@
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a810100 0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
interrupts = <0 81 4>;
};
@@ -145,6 +157,8 @@
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a820100 0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2>;
interrupts = <0 82 4>;
};
@@ -177,3 +191,5 @@
};
};
};
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
new file mode 100644
index 0000000..1b5b4fe
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
@@ -0,0 +1,85 @@
+/*
+ * Device Tree Source for UniPhier SoCs default pinctrl settings
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&pinctrl {
+ pinctrl_uart0: uart0_grp {
+ groups = "uart0";
+ function = "uart0";
+ };
+
+ pinctrl_uart1: uart1_grp {
+ groups = "uart1";
+ function = "uart1";
+ };
+
+ pinctrl_uart2: uart2_grp {
+ groups = "uart2";
+ function = "uart2";
+ };
+
+ pinctrl_uart3: uart3_grp {
+ groups = "uart3";
+ function = "uart3";
+ };
+
+ pinctrl_usb0: usb0_grp {
+ groups = "usb0";
+ function = "usb0";
+ };
+
+ pinctrl_usb1: usb1_grp {
+ groups = "usb1";
+ function = "usb1";
+ };
+
+ pinctrl_usb2: usb2_grp {
+ groups = "usb2";
+ function = "usb2";
+ };
+
+ pinctrl_usb3: usb3_grp {
+ groups = "usb3";
+ function = "usb3";
+ };
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 2/3] ARM: dts: UniPhier: add UART and USB pinmux nodes
@ 2015-07-25 7:23 ` Masahiro Yamada
0 siblings, 0 replies; 9+ messages in thread
From: Masahiro Yamada @ 2015-07-25 7:23 UTC (permalink / raw)
To: linux-arm-kernel
The DT nodes in uniphier-pinctrl.dtsi provide the default pinctrl
settings that would be suitable for most boards. You can still
override them in your board DTS file if necessary.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---
arch/arm/boot/dts/uniphier-ph1-ld4.dtsi | 16 ++++++
arch/arm/boot/dts/uniphier-ph1-pro4.dtsi | 14 ++++++
arch/arm/boot/dts/uniphier-ph1-sld8.dtsi | 16 ++++++
arch/arm/boot/dts/uniphier-pinctrl.dtsi | 85 ++++++++++++++++++++++++++++++++
4 files changed, 131 insertions(+)
create mode 100644 arch/arm/boot/dts/uniphier-pinctrl.dtsi
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
index 518eab7..4add90b 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
@@ -89,6 +89,8 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006800 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
interrupts = <0 33 4>;
clocks = <&uart_clk>;
fifo-size = <64>;
@@ -98,6 +100,8 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006900 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
interrupts = <0 35 4>;
clocks = <&uart_clk>;
fifo-size = <64>;
@@ -107,6 +111,8 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006a00 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
interrupts = <0 37 4>;
clocks = <&uart_clk>;
fifo-size = <64>;
@@ -116,6 +122,8 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006b00 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
interrupts = <0 29 4>;
clocks = <&uart_clk>;
fifo-size = <64>;
@@ -131,6 +139,8 @@
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a800100 0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>;
interrupts = <0 80 4>;
};
@@ -138,6 +148,8 @@
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a810100 0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
interrupts = <0 81 4>;
};
@@ -145,6 +157,8 @@
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a820100 0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2>;
interrupts = <0 82 4>;
};
@@ -177,3 +191,5 @@
};
};
};
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
index 789bd48..d0ca4c8 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
@@ -96,6 +96,8 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006800 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
interrupts = <0 33 4>;
clocks = <&uart_clk>;
fifo-size = <64>;
@@ -105,6 +107,8 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006900 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
interrupts = <0 35 4>;
clocks = <&uart_clk>;
fifo-size = <64>;
@@ -114,6 +118,8 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006a00 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
interrupts = <0 37 4>;
clocks = <&uart_clk>;
fifo-size = <64>;
@@ -123,6 +129,8 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006b00 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
interrupts = <0 29 4>;
clocks = <&uart_clk>;
fifo-size = <64>;
@@ -138,6 +146,8 @@
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a800100 0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2>;
interrupts = <0 80 4>;
};
@@ -145,6 +155,8 @@
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a810100 0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb3>;
interrupts = <0 81 4>;
};
@@ -177,3 +189,5 @@
};
};
};
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
index 8dff3c4..3ead910 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
@@ -89,6 +89,8 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006800 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
interrupts = <0 33 4>;
clocks = <&uart_clk>;
fifo-size = <64>;
@@ -98,6 +100,8 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006900 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
interrupts = <0 35 4>;
clocks = <&uart_clk>;
fifo-size = <64>;
@@ -107,6 +111,8 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006a00 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
interrupts = <0 37 4>;
clocks = <&uart_clk>;
fifo-size = <64>;
@@ -116,6 +122,8 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006b00 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
interrupts = <0 29 4>;
clocks = <&uart_clk>;
fifo-size = <64>;
@@ -131,6 +139,8 @@
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a800100 0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>;
interrupts = <0 80 4>;
};
@@ -138,6 +148,8 @@
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a810100 0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
interrupts = <0 81 4>;
};
@@ -145,6 +157,8 @@
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a820100 0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2>;
interrupts = <0 82 4>;
};
@@ -177,3 +191,5 @@
};
};
};
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
new file mode 100644
index 0000000..1b5b4fe
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
@@ -0,0 +1,85 @@
+/*
+ * Device Tree Source for UniPhier SoCs default pinctrl settings
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&pinctrl {
+ pinctrl_uart0: uart0_grp {
+ groups = "uart0";
+ function = "uart0";
+ };
+
+ pinctrl_uart1: uart1_grp {
+ groups = "uart1";
+ function = "uart1";
+ };
+
+ pinctrl_uart2: uart2_grp {
+ groups = "uart2";
+ function = "uart2";
+ };
+
+ pinctrl_uart3: uart3_grp {
+ groups = "uart3";
+ function = "uart3";
+ };
+
+ pinctrl_usb0: usb0_grp {
+ groups = "usb0";
+ function = "usb0";
+ };
+
+ pinctrl_usb1: usb1_grp {
+ groups = "usb1";
+ function = "usb1";
+ };
+
+ pinctrl_usb2: usb2_grp {
+ groups = "usb2";
+ function = "usb2";
+ };
+
+ pinctrl_usb3: usb3_grp {
+ groups = "usb3";
+ function = "usb3";
+ };
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 3/3] MAINTAINERS: add entries for UniPhier device trees and drivers
2015-07-25 7:23 ` Masahiro Yamada
` (2 preceding siblings ...)
(?)
@ 2015-07-25 7:23 ` Masahiro Yamada
-1 siblings, 0 replies; 9+ messages in thread
From: Masahiro Yamada @ 2015-07-25 7:23 UTC (permalink / raw)
To: arm
Cc: Masahiro Yamada, Arnd Bergmann, Jiri Slaby,
Mauro Carvalho Chehab, Greg KH, linux-kernel, Joe Perches,
Andrew Morton
This clarifies the location of the files maintained by me.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---
MAINTAINERS | 3 +++
1 file changed, 3 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 2eb6272..1c93835 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1579,7 +1579,10 @@ ARM/UNIPHIER ARCHITECTURE
M: Masahiro Yamada <yamada.masahiro@socionext.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
+F: arch/arm/boot/dts/uniphier*
F: arch/arm/mach-uniphier/
+F: drivers/pinctrl/uniphier/
+F: drivers/tty/serial/8250/8250_uniphier.c
N: uniphier
ARM/Ux500 ARM ARCHITECTURE
--
1.9.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH 0/3] ARM: UniPhier: update DTS and MAINTAINERS
2015-07-25 7:23 ` Masahiro Yamada
@ 2015-07-27 12:55 ` Olof Johansson
-1 siblings, 0 replies; 9+ messages in thread
From: Olof Johansson @ 2015-07-27 12:55 UTC (permalink / raw)
To: Masahiro Yamada
Cc: arm, Russell King, Arnd Bergmann, Joe Perches, devicetree,
Mauro Carvalho Chehab, Greg KH, Kumar Gala, linux-kernel,
Ian Campbell, Rob Herring, Andrew Morton, Pawel Moll, Jiri Slaby,
Mark Rutland, linux-arm-kernel
On Sat, Jul 25, 2015 at 04:23:21PM +0900, Masahiro Yamada wrote:
> Hi Arnd and Olof,
>
> The pinctrl drivers for UniPhier SoCs were accepted by Linus Walleij
> into the linux-pinctrl subsystem.
>
> Here is a small series I'd like you to merge into the ARM-SOC subsystem
> to use my pinctrl drivers.
>
Thanks, applied 1 and 2 to next/dt, the third I added to next/soc.
-Olof
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 0/3] ARM: UniPhier: update DTS and MAINTAINERS
@ 2015-07-27 12:55 ` Olof Johansson
0 siblings, 0 replies; 9+ messages in thread
From: Olof Johansson @ 2015-07-27 12:55 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, Jul 25, 2015 at 04:23:21PM +0900, Masahiro Yamada wrote:
> Hi Arnd and Olof,
>
> The pinctrl drivers for UniPhier SoCs were accepted by Linus Walleij
> into the linux-pinctrl subsystem.
>
> Here is a small series I'd like you to merge into the ARM-SOC subsystem
> to use my pinctrl drivers.
>
Thanks, applied 1 and 2 to next/dt, the third I added to next/soc.
-Olof
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2015-07-27 12:57 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-07-25 7:23 [PATCH 0/3] ARM: UniPhier: update DTS and MAINTAINERS Masahiro Yamada
2015-07-25 7:23 ` Masahiro Yamada
2015-07-25 7:23 ` [PATCH 1/3] ARM: dts: UniPhier: add pinctrl device nodes Masahiro Yamada
2015-07-25 7:23 ` Masahiro Yamada
2015-07-25 7:23 ` [PATCH 2/3] ARM: dts: UniPhier: add UART and USB pinmux nodes Masahiro Yamada
2015-07-25 7:23 ` Masahiro Yamada
2015-07-25 7:23 ` [PATCH 3/3] MAINTAINERS: add entries for UniPhier device trees and drivers Masahiro Yamada
2015-07-27 12:55 ` [PATCH 0/3] ARM: UniPhier: update DTS and MAINTAINERS Olof Johansson
2015-07-27 12:55 ` Olof Johansson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.