[PATCH v6 0/8] usb: gadget: rework ep matching and claiming mechanism

[PATCH v6 0/8] usb: gadget: rework ep matching and claiming mechanism

[Robert Baldyga]

Hi Felipe,

These are remaining patches of my series plus one which remained from
series [1]. I have found cause of the regression - there was a mistake
made while simplifying endpoint direction matching. I have already fixed
this issue. Sorry for that.

Best regards,
Robert Baldyga

[1] usb: gadget: get rid of UDC name-based quirks
    https://lkml.org/lkml/2015/7/28/29

Robert Baldyga (8):
  usb: gadget: epautoconf: rework ep_matches() function
  usb: gadget: add 'ep_match' callback to usb_gadget_ops
  usb: gadget: move ep_matches() from epautoconf to udc-core
  usb: gadget: move find_ep() from epautoconf to gadget.h
  usb: gadget: net2280: add net2280_match_ep() function
  usb: gadget: goku_udc: add goku_match_ep() function
  usb: musb: gadget: add musb_match_ep() function
  usb: gadget: remove gadget_chips.h

 drivers/usb/gadget/epautoconf.c              | 166 +--------------------------
 drivers/usb/gadget/function/f_acm.c          |   1 -
 drivers/usb/gadget/function/f_mass_storage.c |   1 -
 drivers/usb/gadget/function/f_obex.c         |   1 -
 drivers/usb/gadget/function/f_serial.c       |   1 -
 drivers/usb/gadget/function/f_sourcesink.c   |   1 -
 drivers/usb/gadget/function/u_ether.h        |   2 -
 drivers/usb/gadget/function/u_uac1.h         |   2 -
 drivers/usb/gadget/legacy/audio.c            |   1 -
 drivers/usb/gadget/legacy/gmidi.c            |   2 -
 drivers/usb/gadget/legacy/hid.c              |   1 -
 drivers/usb/gadget/legacy/nokia.c            |   1 -
 drivers/usb/gadget/legacy/printer.c          |   2 -
 drivers/usb/gadget/legacy/serial.c           |   1 -
 drivers/usb/gadget/udc/gadget_chips.h        |  55 ---------
 drivers/usb/gadget/udc/goku_udc.c            |  25 ++++
 drivers/usb/gadget/udc/net2280.c             |  31 +++++
 drivers/usb/gadget/udc/udc-core.c            |  69 +++++++++++
 drivers/usb/musb/musb_gadget.c               |  34 ++++++
 include/linux/usb/gadget.h                   |  29 +++++
 20 files changed, 192 insertions(+), 234 deletions(-)
 delete mode 100644 drivers/usb/gadget/udc/gadget_chips.h

-- 
1.9.1

[PATCH v6 1/8] usb: gadget: epautoconf: rework ep_matches() function

[Robert Baldyga]

Rework ep_matches() function to make it shorter and more readable.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/epautoconf.c | 81 ++++++++++++++++-------------------------
 1 file changed, 32 insertions(+), 49 deletions(-)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 52658fe..95e1275 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -32,7 +32,6 @@ ep_matches (
 {
 	u8		type;
 	u16		max;
-
 	int		num_req_streams = 0;
 
 	/* endpoint already claimed? */
@@ -40,6 +39,20 @@ ep_matches (
 		return 0;
 
 	type = usb_endpoint_type(desc);
+	max = 0x7ff & usb_endpoint_maxp(desc);
+
+	if (usb_endpoint_dir_in(desc) && !ep->caps.dir_in)
+		return 0;
+	if (usb_endpoint_dir_out(desc) && !ep->caps.dir_out)
+		return 0;
+
+	if (max > ep->maxpacket_limit)
+		return 0;
+
+	/* "high bandwidth" works only at high speed */
+	if (!gadget_is_dualspeed(gadget) && usb_endpoint_maxp(desc) & (3<<11))
+		return 0;
+
 	switch (type) {
 	case USB_ENDPOINT_XFER_CONTROL:
 		/* only support ep0 for portable CONTROL traffic */
@@ -47,66 +60,36 @@ ep_matches (
 	case USB_ENDPOINT_XFER_ISOC:
 		if (!ep->caps.type_iso)
 			return 0;
+		/* ISO:  limit 1023 bytes full speed,
+		 * 1024 high/super speed
+		 */
+		if (!gadget_is_dualspeed(gadget) && max > 1023)
+			return 0;
 		break;
 	case USB_ENDPOINT_XFER_BULK:
 		if (!ep->caps.type_bulk)
 			return 0;
+		if (ep_comp && gadget_is_superspeed(gadget)) {
+			/* Get the number of required streams from the
+			 * EP companion descriptor and see if the EP
+			 * matches it
+			 */
+			num_req_streams = ep_comp->bmAttributes & 0x1f;
+			if (num_req_streams > ep->max_streams)
+				return 0;
+		}
 		break;
 	case USB_ENDPOINT_XFER_INT:
-		/* bulk endpoints handle interrupt transfers,
+		/* Bulk endpoints handle interrupt transfers,
 		 * except the toggle-quirky iso-synch kind
 		 */
 		if (!ep->caps.type_int && !ep->caps.type_bulk)
 			return 0;
-		break;
-	}
-
-	if (usb_endpoint_dir_in(desc)) {
-		if (!ep->caps.dir_in)
-			return 0;
-	} else {
-		if (!ep->caps.dir_out)
-			return 0;
-	}
-
-	/*
-	 * Get the number of required streams from the EP companion
-	 * descriptor and see if the EP matches it
-	 */
-	if (usb_endpoint_xfer_bulk(desc)) {
-		if (ep_comp && gadget->max_speed >= USB_SPEED_SUPER) {
-			num_req_streams = ep_comp->bmAttributes & 0x1f;
-			if (num_req_streams > ep->max_streams)
-				return 0;
-		}
-
-	}
-
-	/* endpoint maxpacket size is an input parameter, except for bulk
-	 * where it's an output parameter representing the full speed limit.
-	 * the usb spec fixes high speed bulk maxpacket at 512 bytes.
-	 */
-	max = 0x7ff & usb_endpoint_maxp(desc);
-	switch (type) {
-	case USB_ENDPOINT_XFER_INT:
-		/* INT:  limit 64 bytes full speed, 1024 high/super speed */
+		/* INT:  limit 64 bytes full speed,
+		 * 1024 high/super speed
+		 */
 		if (!gadget_is_dualspeed(gadget) && max > 64)
 			return 0;
-		/* FALLTHROUGH */
-
-	case USB_ENDPOINT_XFER_ISOC:
-		/* ISO:  limit 1023 bytes full speed, 1024 high/super speed */
-		if (ep->maxpacket_limit < max)
-			return 0;
-		if (!gadget_is_dualspeed(gadget) && max > 1023)
-			return 0;
-
-		/* BOTH:  "high bandwidth" works only at high speed */
-		if ((desc->wMaxPacketSize & cpu_to_le16(3<<11))) {
-			if (!gadget_is_dualspeed(gadget))
-				return 0;
-			/* configure your hardware with enough buffering!! */
-		}
 		break;
 	}
 
-- 
1.9.1

[PATCH v6 2/8] usb: gadget: add 'ep_match' callback to usb_gadget_ops

[Robert Baldyga]

Add callback that is called by epautoconf to allow UDC driver match the
best endpoint for specific descriptor. It's intended to supply mechanism
which allows to get rid of chip-specific endpoint matching code from
epautoconf.

If gadget has set 'ep_match' callback we prefer to call it first, and
if it fails to find matching endpoint, then we try to use default matching
algorithm.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/epautoconf.c | 6 ++++++
 include/linux/usb/gadget.h      | 3 +++
 2 files changed, 9 insertions(+)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 95e1275..f000c73 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -165,6 +165,12 @@ struct usb_ep *usb_ep_autoconfig_ss(
 
 	type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
 
+	if (gadget->ops->match_ep) {
+		ep = gadget->ops->match_ep(gadget, desc, ep_comp);
+		if (ep)
+			goto found_ep;
+	}
+
 	/* First, apply chip-specific "best usage" knowledge.
 	 * This might make a good usb_gadget_ops hook ...
 	 */
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 82b5bcb..303214b 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -534,6 +534,9 @@ struct usb_gadget_ops {
 	int	(*udc_start)(struct usb_gadget *,
 			struct usb_gadget_driver *);
 	int	(*udc_stop)(struct usb_gadget *);
+	struct usb_ep *(*match_ep)(struct usb_gadget *,
+			struct usb_endpoint_descriptor *,
+			struct usb_ss_ep_comp_descriptor *);
 };
 
 /**
-- 
1.9.1

[PATCH v6 3/8] usb: gadget: move ep_matches() from epautoconf to udc-core

[Robert Baldyga]

Move ep_matches() function to udc-core and rename it to
usb_gadget_ep_match_desc(). This function can be used by UDC drivers
in 'match_ep' callback to avoid writing lots of repetitive code.

Replace all calls of ep_matches() with usb_gadget_ep_match_desc().

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/epautoconf.c   | 95 +++++----------------------------------
 drivers/usb/gadget/udc/udc-core.c | 69 ++++++++++++++++++++++++++++
 include/linux/usb/gadget.h        |  8 ++++
 3 files changed, 88 insertions(+), 84 deletions(-)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index f000c73..d49af4f 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -22,82 +22,6 @@
 
 #include "gadget_chips.h"
 
-static int
-ep_matches (
-	struct usb_gadget		*gadget,
-	struct usb_ep			*ep,
-	struct usb_endpoint_descriptor	*desc,
-	struct usb_ss_ep_comp_descriptor *ep_comp
-)
-{
-	u8		type;
-	u16		max;
-	int		num_req_streams = 0;
-
-	/* endpoint already claimed? */
-	if (ep->claimed)
-		return 0;
-
-	type = usb_endpoint_type(desc);
-	max = 0x7ff & usb_endpoint_maxp(desc);
-
-	if (usb_endpoint_dir_in(desc) && !ep->caps.dir_in)
-		return 0;
-	if (usb_endpoint_dir_out(desc) && !ep->caps.dir_out)
-		return 0;
-
-	if (max > ep->maxpacket_limit)
-		return 0;
-
-	/* "high bandwidth" works only at high speed */
-	if (!gadget_is_dualspeed(gadget) && usb_endpoint_maxp(desc) & (3<<11))
-		return 0;
-
-	switch (type) {
-	case USB_ENDPOINT_XFER_CONTROL:
-		/* only support ep0 for portable CONTROL traffic */
-		return 0;
-	case USB_ENDPOINT_XFER_ISOC:
-		if (!ep->caps.type_iso)
-			return 0;
-		/* ISO:  limit 1023 bytes full speed,
-		 * 1024 high/super speed
-		 */
-		if (!gadget_is_dualspeed(gadget) && max > 1023)
-			return 0;
-		break;
-	case USB_ENDPOINT_XFER_BULK:
-		if (!ep->caps.type_bulk)
-			return 0;
-		if (ep_comp && gadget_is_superspeed(gadget)) {
-			/* Get the number of required streams from the
-			 * EP companion descriptor and see if the EP
-			 * matches it
-			 */
-			num_req_streams = ep_comp->bmAttributes & 0x1f;
-			if (num_req_streams > ep->max_streams)
-				return 0;
-		}
-		break;
-	case USB_ENDPOINT_XFER_INT:
-		/* Bulk endpoints handle interrupt transfers,
-		 * except the toggle-quirky iso-synch kind
-		 */
-		if (!ep->caps.type_int && !ep->caps.type_bulk)
-			return 0;
-		/* INT:  limit 64 bytes full speed,
-		 * 1024 high/super speed
-		 */
-		if (!gadget_is_dualspeed(gadget) && max > 64)
-			return 0;
-		break;
-	}
-
-	/* MATCH!! */
-
-	return 1;
-}
-
 static struct usb_ep *
 find_ep (struct usb_gadget *gadget, const char *name)
 {
@@ -180,10 +104,12 @@ struct usb_ep *usb_ep_autoconfig_ss(
 		if (type == USB_ENDPOINT_XFER_INT) {
 			/* ep-e, ep-f are PIO with only 64 byte fifos */
 			ep = find_ep(gadget, "ep-e");
-			if (ep && ep_matches(gadget, ep, desc, ep_comp))
+			if (ep && usb_gadget_ep_match_desc(gadget,
+					ep, desc, ep_comp))
 				goto found_ep;
 			ep = find_ep(gadget, "ep-f");
-			if (ep && ep_matches(gadget, ep, desc, ep_comp))
+			if (ep && usb_gadget_ep_match_desc(gadget,
+					ep, desc, ep_comp))
 				goto found_ep;
 		}
 
@@ -191,20 +117,21 @@ struct usb_ep *usb_ep_autoconfig_ss(
 		snprintf(name, sizeof(name), "ep%d%s", usb_endpoint_num(desc),
 				usb_endpoint_dir_in(desc) ? "in" : "out");
 		ep = find_ep(gadget, name);
-		if (ep && ep_matches(gadget, ep, desc, ep_comp))
+		if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
 			goto found_ep;
 	} else if (gadget_is_goku (gadget)) {
 		if (USB_ENDPOINT_XFER_INT == type) {
 			/* single buffering is enough */
 			ep = find_ep(gadget, "ep3-bulk");
-			if (ep && ep_matches(gadget, ep, desc, ep_comp))
+			if (ep && usb_gadget_ep_match_desc(gadget,
+					ep, desc, ep_comp))
 				goto found_ep;
 		} else if (USB_ENDPOINT_XFER_BULK == type
 				&& (USB_DIR_IN & desc->bEndpointAddress)) {
 			/* DMA may be available */
 			ep = find_ep(gadget, "ep2-bulk");
-			if (ep && ep_matches(gadget, ep, desc,
-					      ep_comp))
+			if (ep && usb_gadget_ep_match_desc(gadget,
+					ep, desc, ep_comp))
 				goto found_ep;
 		}
 
@@ -223,14 +150,14 @@ struct usb_ep *usb_ep_autoconfig_ss(
 				ep = find_ep(gadget, "ep2out");
 		} else
 			ep = NULL;
-		if (ep && ep_matches(gadget, ep, desc, ep_comp))
+		if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
 			goto found_ep;
 #endif
 	}
 
 	/* Second, look at endpoints until an unclaimed one looks usable */
 	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
-		if (ep_matches(gadget, ep, desc, ep_comp))
+		if (usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
 			goto found_ep;
 	}
 
diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c
index 362ee8a..b6427d1 100644
--- a/drivers/usb/gadget/udc/udc-core.c
+++ b/drivers/usb/gadget/udc/udc-core.c
@@ -131,6 +131,75 @@ EXPORT_SYMBOL_GPL(usb_gadget_giveback_request);
 
 /* ------------------------------------------------------------------------- */
 
+int usb_gadget_ep_match_desc(struct usb_gadget *gadget,
+		struct usb_ep *ep, struct usb_endpoint_descriptor *desc,
+		struct usb_ss_ep_comp_descriptor *ep_comp)
+{
+	u8		type;
+	u16		max;
+	int		num_req_streams = 0;
+
+	/* endpoint already claimed? */
+	if (ep->claimed)
+		return 0;
+
+	type = usb_endpoint_type(desc);
+	max = 0x7ff & usb_endpoint_maxp(desc);
+
+	if (usb_endpoint_dir_in(desc) && !ep->caps.dir_in)
+		return 0;
+	if (usb_endpoint_dir_out(desc) && !ep->caps.dir_out)
+		return 0;
+
+	if (max > ep->maxpacket_limit)
+		return 0;
+
+	/* "high bandwidth" works only at high speed */
+	if (!gadget_is_dualspeed(gadget) && usb_endpoint_maxp(desc) & (3<<11))
+		return 0;
+
+	switch (type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		/* only support ep0 for portable CONTROL traffic */
+		return 0;
+	case USB_ENDPOINT_XFER_ISOC:
+		if (!ep->caps.type_iso)
+			return 0;
+		/* ISO:  limit 1023 bytes full speed, 1024 high/super speed */
+		if (!gadget_is_dualspeed(gadget) && max > 1023)
+			return 0;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		if (!ep->caps.type_bulk)
+			return 0;
+		if (ep_comp && gadget_is_superspeed(gadget)) {
+			/* Get the number of required streams from the
+			 * EP companion descriptor and see if the EP
+			 * matches it
+			 */
+			num_req_streams = ep_comp->bmAttributes & 0x1f;
+			if (num_req_streams > ep->max_streams)
+				return 0;
+		}
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		/* Bulk endpoints handle interrupt transfers,
+		 * except the toggle-quirky iso-synch kind
+		 */
+		if (!ep->caps.type_int && !ep->caps.type_bulk)
+			return 0;
+		/* INT:  limit 64 bytes full speed, 1024 high/super speed */
+		if (!gadget_is_dualspeed(gadget) && max > 64)
+			return 0;
+		break;
+	}
+
+	return 1;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_ep_match_desc);
+
+/* ------------------------------------------------------------------------- */
+
 static void usb_gadget_state_work(struct work_struct *work)
 {
 	struct usb_gadget *gadget = work_to_gadget(work);
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 303214b..e04fd63 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -1204,6 +1204,14 @@ extern void usb_gadget_giveback_request(struct usb_ep *ep,
 
 /*-------------------------------------------------------------------------*/
 
+/* utility to check if endpoint caps match descriptor needs */
+
+extern int usb_gadget_ep_match_desc(struct usb_gadget *gadget,
+		struct usb_ep *ep, struct usb_endpoint_descriptor *desc,
+		struct usb_ss_ep_comp_descriptor *ep_comp);
+
+/*-------------------------------------------------------------------------*/
+
 /* utility to update vbus status for udc core, it may be scheduled */
 extern void usb_udc_vbus_handler(struct usb_gadget *gadget, bool status);
 
-- 
1.9.1

[PATCH v6 4/8] usb: gadget: move find_ep() from epautoconf to gadget.h

[Robert Baldyga]

Move find_ep() function to gadget.h, rename it to gadget_find_ep_by_name()
and make it static inline. It can be used in UDC drivers, especially in
'match_ep' callback after moving chip-specific endpoint matching logic from
epautoconf to UDC drivers.

Replace all calls of find_ep() function with gadget_find_ep_by_name().

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/epautoconf.c | 30 +++++++++---------------------
 include/linux/usb/gadget.h      | 18 ++++++++++++++++++
 2 files changed, 27 insertions(+), 21 deletions(-)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index d49af4f..a39ca03 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -22,18 +22,6 @@
 
 #include "gadget_chips.h"
 
-static struct usb_ep *
-find_ep (struct usb_gadget *gadget, const char *name)
-{
-	struct usb_ep	*ep;
-
-	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
-		if (0 == strcmp (ep->name, name))
-			return ep;
-	}
-	return NULL;
-}
-
 /**
  * usb_ep_autoconfig_ss() - choose an endpoint matching the ep
  * descriptor and ep companion descriptor
@@ -103,11 +91,11 @@ struct usb_ep *usb_ep_autoconfig_ss(
 
 		if (type == USB_ENDPOINT_XFER_INT) {
 			/* ep-e, ep-f are PIO with only 64 byte fifos */
-			ep = find_ep(gadget, "ep-e");
+			ep = gadget_find_ep_by_name(gadget, "ep-e");
 			if (ep && usb_gadget_ep_match_desc(gadget,
 					ep, desc, ep_comp))
 				goto found_ep;
-			ep = find_ep(gadget, "ep-f");
+			ep = gadget_find_ep_by_name(gadget, "ep-f");
 			if (ep && usb_gadget_ep_match_desc(gadget,
 					ep, desc, ep_comp))
 				goto found_ep;
@@ -116,20 +104,20 @@ struct usb_ep *usb_ep_autoconfig_ss(
 		/* USB3380: use same address for usb and hardware endpoints */
 		snprintf(name, sizeof(name), "ep%d%s", usb_endpoint_num(desc),
 				usb_endpoint_dir_in(desc) ? "in" : "out");
-		ep = find_ep(gadget, name);
+		ep = gadget_find_ep_by_name(gadget, name);
 		if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
 			goto found_ep;
 	} else if (gadget_is_goku (gadget)) {
 		if (USB_ENDPOINT_XFER_INT == type) {
 			/* single buffering is enough */
-			ep = find_ep(gadget, "ep3-bulk");
+			ep = gadget_find_ep_by_name(gadget, "ep3-bulk");
 			if (ep && usb_gadget_ep_match_desc(gadget,
 					ep, desc, ep_comp))
 				goto found_ep;
 		} else if (USB_ENDPOINT_XFER_BULK == type
 				&& (USB_DIR_IN & desc->bEndpointAddress)) {
 			/* DMA may be available */
-			ep = find_ep(gadget, "ep2-bulk");
+			ep = gadget_find_ep_by_name(gadget, "ep2-bulk");
 			if (ep && usb_gadget_ep_match_desc(gadget,
 					ep, desc, ep_comp))
 				goto found_ep;
@@ -140,14 +128,14 @@ struct usb_ep *usb_ep_autoconfig_ss(
 		if ((USB_ENDPOINT_XFER_BULK == type) ||
 		    (USB_ENDPOINT_XFER_ISOC == type)) {
 			if (USB_DIR_IN & desc->bEndpointAddress)
-				ep = find_ep (gadget, "ep5in");
+				ep = gadget_find_ep_by_name(gadget, "ep5in");
 			else
-				ep = find_ep (gadget, "ep6out");
+				ep = gadget_find_ep_by_name(gadget, "ep6out");
 		} else if (USB_ENDPOINT_XFER_INT == type) {
 			if (USB_DIR_IN & desc->bEndpointAddress)
-				ep = find_ep(gadget, "ep1in");
+				ep = gadget_find_ep_by_name(gadget, "ep1in");
 			else
-				ep = find_ep(gadget, "ep2out");
+				ep = gadget_find_ep_by_name(gadget, "ep2out");
 		} else
 			ep = NULL;
 		if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index e04fd63..6a413ab 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -639,6 +639,24 @@ static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev)
 #define gadget_for_each_ep(tmp, gadget) \
 	list_for_each_entry(tmp, &(gadget)->ep_list, ep_list)
 
+/**
+ * gadget_find_ep_by_name - returns ep whose name is the same as sting passed
+ *	in second parameter or NULL if searched endpoint not found
+ * @g: controller to check for quirk
+ * @name: name of searched endpoint
+ */
+static inline struct usb_ep *
+gadget_find_ep_by_name(struct usb_gadget *g, const char *name)
+{
+	struct usb_ep *ep;
+
+	gadget_for_each_ep(ep, g) {
+		if (!strcmp(ep->name, name))
+			return ep;
+	}
+
+	return NULL;
+}
 
 /**
  * usb_ep_align_maybe - returns @len aligned to ep's maxpacketsize if gadget
-- 
1.9.1

[PATCH v6 5/8] usb: gadget: net2280: add net2280_match_ep() function

[Robert Baldyga]

Add 'match_ep' callback to utilize chip-specific knowledge in endpoint matching
process. Function does the same that was done by chip-specific code inside
of epautoconf. Now this code can be removed from there to separate generic code
from platform specific logic.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/epautoconf.c  | 23 +----------------------
 drivers/usb/gadget/udc/net2280.c | 31 +++++++++++++++++++++++++++++++
 2 files changed, 32 insertions(+), 22 deletions(-)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index a39ca03..0ff5134 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -86,28 +86,7 @@ struct usb_ep *usb_ep_autoconfig_ss(
 	/* First, apply chip-specific "best usage" knowledge.
 	 * This might make a good usb_gadget_ops hook ...
 	 */
-	if (gadget_is_net2280(gadget)) {
-		char name[8];
-
-		if (type == USB_ENDPOINT_XFER_INT) {
-			/* ep-e, ep-f are PIO with only 64 byte fifos */
-			ep = gadget_find_ep_by_name(gadget, "ep-e");
-			if (ep && usb_gadget_ep_match_desc(gadget,
-					ep, desc, ep_comp))
-				goto found_ep;
-			ep = gadget_find_ep_by_name(gadget, "ep-f");
-			if (ep && usb_gadget_ep_match_desc(gadget,
-					ep, desc, ep_comp))
-				goto found_ep;
-		}
-
-		/* USB3380: use same address for usb and hardware endpoints */
-		snprintf(name, sizeof(name), "ep%d%s", usb_endpoint_num(desc),
-				usb_endpoint_dir_in(desc) ? "in" : "out");
-		ep = gadget_find_ep_by_name(gadget, name);
-		if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
-			goto found_ep;
-	} else if (gadget_is_goku (gadget)) {
+	if (gadget_is_goku(gadget)) {
 		if (USB_ENDPOINT_XFER_INT == type) {
 			/* single buffering is enough */
 			ep = gadget_find_ep_by_name(gadget, "ep3-bulk");
diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index 872ca25..9d7eac1 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -1550,6 +1550,36 @@ static int net2280_pullup(struct usb_gadget *_gadget, int is_on)
 	return 0;
 }
 
+static struct usb_ep *net2280_match_ep(struct usb_gadget *_gadget,
+		struct usb_endpoint_descriptor *desc,
+		struct usb_ss_ep_comp_descriptor *ep_comp)
+{
+	char name[8];
+	struct usb_ep *ep;
+	u8 type;
+
+	type = usb_endpoint_type(desc);
+
+	if (type == USB_ENDPOINT_XFER_INT) {
+		/* ep-e, ep-f are PIO with only 64 byte fifos */
+		ep = gadget_find_ep_by_name(_gadget, "ep-e");
+		if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+			return ep;
+		ep = gadget_find_ep_by_name(_gadget, "ep-f");
+		if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+			return ep;
+	}
+
+	/* USB3380: use same address for usb and hardware endpoints */
+	snprintf(name, sizeof(name), "ep%d%s", usb_endpoint_num(desc),
+			usb_endpoint_dir_in(desc) ? "in" : "out");
+	ep = gadget_find_ep_by_name(_gadget, name);
+	if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+		return ep;
+
+	return NULL;
+}
+
 static int net2280_start(struct usb_gadget *_gadget,
 		struct usb_gadget_driver *driver);
 static int net2280_stop(struct usb_gadget *_gadget);
@@ -1561,6 +1591,7 @@ static const struct usb_gadget_ops net2280_ops = {
 	.pullup		= net2280_pullup,
 	.udc_start	= net2280_start,
 	.udc_stop	= net2280_stop,
+	.match_ep	= net2280_match_ep,
 };
 
 /*-------------------------------------------------------------------------*/
-- 
1.9.1

[PATCH v6 6/8] usb: gadget: goku_udc: add goku_match_ep() function

[Robert Baldyga]

Add 'match_ep' callback to utilize chip-specific knowledge in endpoint matching
process. Function does the same that was done by chip-specific code inside
of epautoconf. Now this code can be removed from there to separate generic code
from platform specific logic.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/epautoconf.c   | 20 ++------------------
 drivers/usb/gadget/udc/goku_udc.c | 25 +++++++++++++++++++++++++
 2 files changed, 27 insertions(+), 18 deletions(-)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 0ff5134..574b6a4 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -86,24 +86,8 @@ struct usb_ep *usb_ep_autoconfig_ss(
 	/* First, apply chip-specific "best usage" knowledge.
 	 * This might make a good usb_gadget_ops hook ...
 	 */
-	if (gadget_is_goku(gadget)) {
-		if (USB_ENDPOINT_XFER_INT == type) {
-			/* single buffering is enough */
-			ep = gadget_find_ep_by_name(gadget, "ep3-bulk");
-			if (ep && usb_gadget_ep_match_desc(gadget,
-					ep, desc, ep_comp))
-				goto found_ep;
-		} else if (USB_ENDPOINT_XFER_BULK == type
-				&& (USB_DIR_IN & desc->bEndpointAddress)) {
-			/* DMA may be available */
-			ep = gadget_find_ep_by_name(gadget, "ep2-bulk");
-			if (ep && usb_gadget_ep_match_desc(gadget,
-					ep, desc, ep_comp))
-				goto found_ep;
-		}
-
 #ifdef CONFIG_BLACKFIN
-	} else if (gadget_is_musbhdrc(gadget)) {
+	if (gadget_is_musbhdrc(gadget)) {
 		if ((USB_ENDPOINT_XFER_BULK == type) ||
 		    (USB_ENDPOINT_XFER_ISOC == type)) {
 			if (USB_DIR_IN & desc->bEndpointAddress)
@@ -119,8 +103,8 @@ struct usb_ep *usb_ep_autoconfig_ss(
 			ep = NULL;
 		if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
 			goto found_ep;
-#endif
 	}
+#endif
 
 	/* Second, look at endpoints until an unclaimed one looks usable */
 	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
diff --git a/drivers/usb/gadget/udc/goku_udc.c b/drivers/usb/gadget/udc/goku_udc.c
index 46b8d14..d5a93ea 100644
--- a/drivers/usb/gadget/udc/goku_udc.c
+++ b/drivers/usb/gadget/udc/goku_udc.c
@@ -990,6 +990,30 @@ static int goku_get_frame(struct usb_gadget *_gadget)
 	return -EOPNOTSUPP;
 }
 
+static struct usb_ep *goku_match_ep(struct usb_gadget *g,
+		struct usb_endpoint_descriptor *desc,
+		struct usb_ss_ep_comp_descriptor *ep_comp)
+{
+	struct goku_udc	*dev = to_goku_udc(g);
+	struct usb_ep *ep;
+	u8 type = usb_endpoint_type(desc);
+
+	if (type == USB_ENDPOINT_XFER_INT) {
+		/* single buffering is enough */
+		ep = &dev->ep[3].ep;
+		if (ep && usb_gadget_ep_match_desc(g, ep, desc, ep_comp))
+			return ep;
+	} else if (type == USB_ENDPOINT_XFER_BULK
+			&& usb_endpoint_dir_in(desc)) {
+		/* DMA may be available */
+		ep = &dev->ep[2].ep;
+		if (ep && usb_gadget_ep_match_desc(g, ep, desc, ep_comp))
+			return ep;
+	}
+
+	return NULL;
+}
+
 static int goku_udc_start(struct usb_gadget *g,
 		struct usb_gadget_driver *driver);
 static int goku_udc_stop(struct usb_gadget *g);
@@ -998,6 +1022,7 @@ static const struct usb_gadget_ops goku_ops = {
 	.get_frame	= goku_get_frame,
 	.udc_start	= goku_udc_start,
 	.udc_stop	= goku_udc_stop,
+	.match_ep	= goku_match_ep,
 	// no remote wakeup
 	// not selfpowered
 };
-- 
1.9.1

[PATCH v6 7/8] usb: musb: gadget: add musb_match_ep() function

[Robert Baldyga]

Add 'match_ep' callback to utilize chip-specific knowledge in endpoint matching
process. Function does the same that was done by chip-specific code inside
of epautoconf. Now this code can be removed from there to separate generic code
from platform specific logic.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/epautoconf.c | 23 -----------------------
 drivers/usb/musb/musb_gadget.c  | 34 ++++++++++++++++++++++++++++++++++
 2 files changed, 34 insertions(+), 23 deletions(-)

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 574b6a4..16c1cc9 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -83,29 +83,6 @@ struct usb_ep *usb_ep_autoconfig_ss(
 			goto found_ep;
 	}
 
-	/* First, apply chip-specific "best usage" knowledge.
-	 * This might make a good usb_gadget_ops hook ...
-	 */
-#ifdef CONFIG_BLACKFIN
-	if (gadget_is_musbhdrc(gadget)) {
-		if ((USB_ENDPOINT_XFER_BULK == type) ||
-		    (USB_ENDPOINT_XFER_ISOC == type)) {
-			if (USB_DIR_IN & desc->bEndpointAddress)
-				ep = gadget_find_ep_by_name(gadget, "ep5in");
-			else
-				ep = gadget_find_ep_by_name(gadget, "ep6out");
-		} else if (USB_ENDPOINT_XFER_INT == type) {
-			if (USB_DIR_IN & desc->bEndpointAddress)
-				ep = gadget_find_ep_by_name(gadget, "ep1in");
-			else
-				ep = gadget_find_ep_by_name(gadget, "ep2out");
-		} else
-			ep = NULL;
-		if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
-			goto found_ep;
-	}
-#endif
-
 	/* Second, look at endpoints until an unclaimed one looks usable */
 	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
 		if (usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 4150baf..ac2f188 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1684,6 +1684,39 @@ static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
 	return 0;
 }
 
+#ifdef CONFIG_BLACKFIN
+static struct usb_ep *musb_match_ep(struct usb_gadget *g,
+		struct usb_endpoint_descriptor *desc,
+		struct usb_ss_ep_comp_descriptor *ep_comp)
+{
+	struct usb_ep *ep = NULL;
+	u8 type = usb_endpoint_type(desc);
+
+	switch (type) {
+	case USB_ENDPOINT_XFER_ISOC:
+	case USB_ENDPOINT_XFER_BULK:
+		if (usb_endpoint_dir_in(desc))
+			ep = gadget_find_ep_by_name(g, "ep5in");
+		else
+			ep = gadget_find_ep_by_name(g, "ep6out");
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		if (usb_endpoint_dir_in(desc))
+			ep = gadget_find_ep_by_name(g, "ep1in");
+		else
+			ep = gadget_find_ep_by_name(g, "ep2out");
+	default:
+	}
+
+	if (ep && usb_gadget_ep_match_desc(g, ep, desc, ep_comp))
+		return ep;
+
+	return NULL;
+}
+#else
+#define musb_match_ep NULL
+#endif
+
 static int musb_gadget_start(struct usb_gadget *g,
 		struct usb_gadget_driver *driver);
 static int musb_gadget_stop(struct usb_gadget *g);
@@ -1697,6 +1730,7 @@ static const struct usb_gadget_ops musb_gadget_operations = {
 	.pullup			= musb_gadget_pullup,
 	.udc_start		= musb_gadget_start,
 	.udc_stop		= musb_gadget_stop,
+	.match_ep		= musb_match_ep,
 };
 
 /* ----------------------------------------------------------------------- */
-- 
1.9.1

[PATCH v6 8/8] usb: gadget: remove gadget_chips.h

[Robert Baldyga]

This header file contains helpers for quirks based on UDC controller name.
Since we have generic quirk bitfields in usb_gadget structure for all of
these quirks we don't need to have this header any longer.

This patch removes gadget_chips.h file and makes sure that it's no longer
included anywhere in kernel sources.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
 drivers/usb/gadget/epautoconf.c              |  2 -
 drivers/usb/gadget/function/f_acm.c          |  1 -
 drivers/usb/gadget/function/f_mass_storage.c |  1 -
 drivers/usb/gadget/function/f_obex.c         |  1 -
 drivers/usb/gadget/function/f_serial.c       |  1 -
 drivers/usb/gadget/function/f_sourcesink.c   |  1 -
 drivers/usb/gadget/function/u_ether.h        |  2 -
 drivers/usb/gadget/function/u_uac1.h         |  2 -
 drivers/usb/gadget/legacy/audio.c            |  1 -
 drivers/usb/gadget/legacy/gmidi.c            |  2 -
 drivers/usb/gadget/legacy/hid.c              |  1 -
 drivers/usb/gadget/legacy/nokia.c            |  1 -
 drivers/usb/gadget/legacy/printer.c          |  2 -
 drivers/usb/gadget/legacy/serial.c           |  1 -
 drivers/usb/gadget/udc/gadget_chips.h        | 55 ----------------------------
 15 files changed, 74 deletions(-)
 delete mode 100644 drivers/usb/gadget/udc/gadget_chips.h

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 16c1cc9..978435a 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -20,8 +20,6 @@
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 
-#include "gadget_chips.h"
-
 /**
  * usb_ep_autoconfig_ss() - choose an endpoint matching the ep
  * descriptor and ep companion descriptor
diff --git a/drivers/usb/gadget/function/f_acm.c b/drivers/usb/gadget/function/f_acm.c
index aad8165..be9df09 100644
--- a/drivers/usb/gadget/function/f_acm.c
+++ b/drivers/usb/gadget/function/f_acm.c
@@ -21,7 +21,6 @@
 #include <linux/err.h>
 
 #include "u_serial.h"
-#include "gadget_chips.h"
 
 
 /*
diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c
index 04c3bb6..11a7f5a 100644
--- a/drivers/usb/gadget/function/f_mass_storage.c
+++ b/drivers/usb/gadget/function/f_mass_storage.c
@@ -219,7 +219,6 @@
 #include <linux/usb/gadget.h>
 #include <linux/usb/composite.h>
 
-#include "gadget_chips.h"
 #include "configfs.h"
 
 
diff --git a/drivers/usb/gadget/function/f_obex.c b/drivers/usb/gadget/function/f_obex.c
index 2682d59..5460426 100644
--- a/drivers/usb/gadget/function/f_obex.c
+++ b/drivers/usb/gadget/function/f_obex.c
@@ -20,7 +20,6 @@
 #include <linux/module.h>
 
 #include "u_serial.h"
-#include "gadget_chips.h"
 
 
 /*
diff --git a/drivers/usb/gadget/function/f_serial.c b/drivers/usb/gadget/function/f_serial.c
index 2e02dfa..1d162e2 100644
--- a/drivers/usb/gadget/function/f_serial.c
+++ b/drivers/usb/gadget/function/f_serial.c
@@ -16,7 +16,6 @@
 #include <linux/device.h>
 
 #include "u_serial.h"
-#include "gadget_chips.h"
 
 
 /*
diff --git a/drivers/usb/gadget/function/f_sourcesink.c b/drivers/usb/gadget/function/f_sourcesink.c
index e6af171..cbfaf86 100644
--- a/drivers/usb/gadget/function/f_sourcesink.c
+++ b/drivers/usb/gadget/function/f_sourcesink.c
@@ -20,7 +20,6 @@
 #include <linux/err.h>
 
 #include "g_zero.h"
-#include "gadget_chips.h"
 #include "u_f.h"
 
 /*
diff --git a/drivers/usb/gadget/function/u_ether.h b/drivers/usb/gadget/function/u_ether.h
index 1384f00..c77145b 100644
--- a/drivers/usb/gadget/function/u_ether.h
+++ b/drivers/usb/gadget/function/u_ether.h
@@ -20,8 +20,6 @@
 #include <linux/usb/cdc.h>
 #include <linux/netdevice.h>
 
-#include "gadget_chips.h"
-
 #define QMULT_DEFAULT 5
 
 /*
diff --git a/drivers/usb/gadget/function/u_uac1.h b/drivers/usb/gadget/function/u_uac1.h
index fe386df..5c2ac8e 100644
--- a/drivers/usb/gadget/function/u_uac1.h
+++ b/drivers/usb/gadget/function/u_uac1.h
@@ -21,8 +21,6 @@
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
 
-#include "gadget_chips.h"
-
 #define FILE_PCM_PLAYBACK	"/dev/snd/pcmC0D0p"
 #define FILE_PCM_CAPTURE	"/dev/snd/pcmC0D0c"
 #define FILE_CONTROL		"/dev/snd/controlC0"
diff --git a/drivers/usb/gadget/legacy/audio.c b/drivers/usb/gadget/legacy/audio.c
index 9b2c1c6..685cf3b 100644
--- a/drivers/usb/gadget/legacy/audio.c
+++ b/drivers/usb/gadget/legacy/audio.c
@@ -15,7 +15,6 @@
 #include <linux/module.h>
 #include <linux/usb/composite.h>
 
-#include "gadget_chips.h"
 #define DRIVER_DESC		"Linux USB Audio Gadget"
 #define DRIVER_VERSION		"Feb 2, 2012"
 
diff --git a/drivers/usb/gadget/legacy/gmidi.c b/drivers/usb/gadget/legacy/gmidi.c
index 650568d..8a18348 100644
--- a/drivers/usb/gadget/legacy/gmidi.c
+++ b/drivers/usb/gadget/legacy/gmidi.c
@@ -35,8 +35,6 @@
 #include <linux/usb/audio.h>
 #include <linux/usb/midi.h>
 
-#include "gadget_chips.h"
-
 #include "u_midi.h"
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/gadget/legacy/hid.c b/drivers/usb/gadget/legacy/hid.c
index e4874d3..7e5d2c4 100644
--- a/drivers/usb/gadget/legacy/hid.c
+++ b/drivers/usb/gadget/legacy/hid.c
@@ -19,7 +19,6 @@
 #include <linux/usb/composite.h>
 #include <linux/usb/g_hid.h>
 
-#include "gadget_chips.h"
 #define DRIVER_DESC		"HID Gadget"
 #define DRIVER_VERSION		"2010/03/16"
 
diff --git a/drivers/usb/gadget/legacy/nokia.c b/drivers/usb/gadget/legacy/nokia.c
index c20f3b5..8b3f6fb 100644
--- a/drivers/usb/gadget/legacy/nokia.c
+++ b/drivers/usb/gadget/legacy/nokia.c
@@ -23,7 +23,6 @@
 #include "u_ether.h"
 #include "u_phonet.h"
 #include "u_ecm.h"
-#include "gadget_chips.h"
 #include "f_mass_storage.h"
 
 /* Defines */
diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index 0c1fc06..a22d30a 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -19,8 +19,6 @@
 #include <linux/usb/gadget.h>
 #include <linux/usb/g_printer.h>
 
-#include "gadget_chips.h"
-
 USB_GADGET_COMPOSITE_OPTIONS();
 
 #define DRIVER_DESC		"Printer Gadget"
diff --git a/drivers/usb/gadget/legacy/serial.c b/drivers/usb/gadget/legacy/serial.c
index 9836d16..c5d42e0 100644
--- a/drivers/usb/gadget/legacy/serial.c
+++ b/drivers/usb/gadget/legacy/serial.c
@@ -17,7 +17,6 @@
 #include <linux/tty_flip.h>
 
 #include "u_serial.h"
-#include "gadget_chips.h"
 
 
 /* Defines */
diff --git a/drivers/usb/gadget/udc/gadget_chips.h b/drivers/usb/gadget/udc/gadget_chips.h
deleted file mode 100644
index bcd04bc..0000000
--- a/drivers/usb/gadget/udc/gadget_chips.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * USB device controllers have lots of quirks.  Use these macros in
- * gadget drivers or other code that needs to deal with them, and which
- * autoconfigures instead of using early binding to the hardware.
- *
- * This SHOULD eventually work like the ARM mach_is_*() stuff, driven by
- * some config file that gets updated as new hardware is supported.
- * (And avoiding all runtime comparisons in typical one-choice configs!)
- *
- * NOTE:  some of these controller drivers may not be available yet.
- * Some are available on 2.4 kernels; several are available, but not
- * yet pushed in the 2.6 mainline tree.
- */
-
-#ifndef __GADGET_CHIPS_H
-#define __GADGET_CHIPS_H
-
-#include <linux/usb/gadget.h>
-
-/*
- * NOTICE: the entries below are alphabetical and should be kept
- * that way.
- *
- * Always be sure to add new entries to the correct position or
- * accept the bashing later.
- *
- * If you have forgotten the alphabetical order let VIM/EMACS
- * do that for you.
- */
-#define gadget_is_at91(g)		(!strcmp("at91_udc", (g)->name))
-#define gadget_is_goku(g)		(!strcmp("goku_udc", (g)->name))
-#define gadget_is_musbhdrc(g)		(!strcmp("musb-hdrc", (g)->name))
-#define gadget_is_net2280(g)		(!strcmp("net2280", (g)->name))
-#define gadget_is_pxa(g)		(!strcmp("pxa25x_udc", (g)->name))
-#define gadget_is_pxa27x(g)		(!strcmp("pxa27x_udc", (g)->name))
-
-/**
- * gadget_supports_altsettings - return true if altsettings work
- * @gadget: the gadget in question
- */
-static inline bool gadget_supports_altsettings(struct usb_gadget *gadget)
-{
-	/* PXA 21x/25x/26x has no altsettings at all */
-	if (gadget_is_pxa(gadget))
-		return false;
-
-	/* PXA 27x and 3xx have *broken* altsetting support */
-	if (gadget_is_pxa27x(gadget))
-		return false;
-
-	/* Everything else is *presumably* fine ... */
-	return true;
-}
-
-#endif /* __GADGET_CHIPS_H */
-- 
1.9.1

Re: [PATCH v6 4/8] usb: gadget: move find_ep() from epautoconf to gadget.h

[Alan Stern]

On Wed, 5 Aug 2015, Robert Baldyga wrote:

> Move find_ep() function to gadget.h, rename it to gadget_find_ep_by_name()
> and make it static inline. It can be used in UDC drivers, especially in
> 'match_ep' callback after moving chip-specific endpoint matching logic from
> epautoconf to UDC drivers.

> --- a/include/linux/usb/gadget.h
> +++ b/include/linux/usb/gadget.h
> @@ -639,6 +639,24 @@ static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev)
>  #define gadget_for_each_ep(tmp, gadget) \
>  	list_for_each_entry(tmp, &(gadget)->ep_list, ep_list)
>  
> +/**
> + * gadget_find_ep_by_name - returns ep whose name is the same as sting passed
> + *	in second parameter or NULL if searched endpoint not found
> + * @g: controller to check for quirk
> + * @name: name of searched endpoint
> + */
> +static inline struct usb_ep *
> +gadget_find_ep_by_name(struct usb_gadget *g, const char *name)
> +{
> +	struct usb_ep *ep;
> +
> +	gadget_for_each_ep(ep, g) {
> +		if (!strcmp(ep->name, name))
> +			return ep;
> +	}
> +
> +	return NULL;
> +}

Minor point: Is this function short enough to be worth inlining?  My 
general feeling has been that anything containing a nontrivial loop 
probably shouldn't be inlined, but I could be wrong.

Alan Stern

Re: [PATCH v6 4/8] usb: gadget: move find_ep() from epautoconf to gadget.h

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 1542 bytes --]

On Wed, Aug 05, 2015 at 10:30:54AM -0400, Alan Stern wrote:
> On Wed, 5 Aug 2015, Robert Baldyga wrote:
> 
> > Move find_ep() function to gadget.h, rename it to gadget_find_ep_by_name()
> > and make it static inline. It can be used in UDC drivers, especially in
> > 'match_ep' callback after moving chip-specific endpoint matching logic from
> > epautoconf to UDC drivers.
> 
> > --- a/include/linux/usb/gadget.h
> > +++ b/include/linux/usb/gadget.h
> > @@ -639,6 +639,24 @@ static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev)
> >  #define gadget_for_each_ep(tmp, gadget) \
> >  	list_for_each_entry(tmp, &(gadget)->ep_list, ep_list)
> >  
> > +/**
> > + * gadget_find_ep_by_name - returns ep whose name is the same as sting passed
> > + *	in second parameter or NULL if searched endpoint not found
> > + * @g: controller to check for quirk
> > + * @name: name of searched endpoint
> > + */
> > +static inline struct usb_ep *
> > +gadget_find_ep_by_name(struct usb_gadget *g, const char *name)
> > +{
> > +	struct usb_ep *ep;
> > +
> > +	gadget_for_each_ep(ep, g) {
> > +		if (!strcmp(ep->name, name))
> > +			return ep;
> > +	}
> > +
> > +	return NULL;
> > +}
> 
> Minor point: Is this function short enough to be worth inlining?  My 
> general feeling has been that anything containing a nontrivial loop 
> probably shouldn't be inlined, but I could be wrong.

makes sense. Looks like moving it to udc-core.c and making it
EXPORT_SYMBOL_GPL() would be the way to go ?

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]