[PATCH v3 1/3] mwifiex: add support for 8997 chipset

[PATCH v3 1/3] mwifiex: add support for 8997 chipset

[Amitkumar Karwar]

From: Zhaoyang Liu <liuzy@marvell.com>

This patch adds support for 8997 chipset to mwifiex
with SDIO/PCIe/USB interface.

The corresponding firmware image files are located in:
"mrvl/sd8997_uapsta.bin"
"mrvl/pcie8997_uapsta.bin"
"mrvl/usb8997_uapsta.bin"

Signed-off-by: Zhaoyang Liu <liuzy@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
---
 drivers/net/wireless/mwifiex/Kconfig | 12 +++----
 drivers/net/wireless/mwifiex/pcie.c  | 12 +++++--
 drivers/net/wireless/mwifiex/pcie.h  | 45 ++++++++++++++++++++++++-
 drivers/net/wireless/mwifiex/sdio.c  |  5 +++
 drivers/net/wireless/mwifiex/sdio.h  | 65 ++++++++++++++++++++++++++++++++++++
 drivers/net/wireless/mwifiex/usb.c   | 14 ++++++++
 drivers/net/wireless/mwifiex/usb.h   |  3 ++
 7 files changed, 147 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/mwifiex/Kconfig b/drivers/net/wireless/mwifiex/Kconfig
index 48edf38..317d991 100644
--- a/drivers/net/wireless/mwifiex/Kconfig
+++ b/drivers/net/wireless/mwifiex/Kconfig
@@ -9,36 +9,36 @@ config MWIFIEX
 	  mwifiex.
 
 config MWIFIEX_SDIO
-	tristate "Marvell WiFi-Ex Driver for SD8786/SD8787/SD8797/SD8887/SD8897"
+	tristate "Marvell WiFi-Ex Driver for SD8786/SD8787/SD8797/SD8887/SD8897/SD8997"
 	depends on MWIFIEX && MMC
 	select FW_LOADER
 	select WANT_DEV_COREDUMP
 	---help---
 	  This adds support for wireless adapters based on Marvell
-	  8786/8787/8797/8887/8897 chipsets with SDIO interface.
+	  8786/8787/8797/8887/8897/8997 chipsets with SDIO interface.
 
 	  If you choose to build it as a module, it will be called
 	  mwifiex_sdio.
 
 config MWIFIEX_PCIE
-	tristate "Marvell WiFi-Ex Driver for PCIE 8766/8897"
+	tristate "Marvell WiFi-Ex Driver for PCIE 8766/8897/8997"
 	depends on MWIFIEX && PCI
 	select FW_LOADER
 	select WANT_DEV_COREDUMP
 	---help---
 	  This adds support for wireless adapters based on Marvell
-	  8766/8897 chipsets with PCIe interface.
+	  8766/8897/8997 chipsets with PCIe interface.
 
 	  If you choose to build it as a module, it will be called
 	  mwifiex_pcie.
 
 config MWIFIEX_USB
-	tristate "Marvell WiFi-Ex Driver for USB8766/8797/8897"
+	tristate "Marvell WiFi-Ex Driver for USB8766/8797/8897/8997"
 	depends on MWIFIEX && USB
 	select FW_LOADER
 	---help---
 	  This adds support for wireless adapters based on Marvell
-	  8797/8897 chipset with USB interface.
+	  8797/8897/8997 chipset with USB interface.
 
 	  If you choose to build it as a module, it will be called
 	  mwifiex_usb.
diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c
index 33c75d7..408b684 100644
--- a/drivers/net/wireless/mwifiex/pcie.c
+++ b/drivers/net/wireless/mwifiex/pcie.c
@@ -266,12 +266,17 @@ static const struct pci_device_id mwifiex_ids[] = {
 	{
 		PCIE_VENDOR_ID_MARVELL, PCIE_DEVICE_ID_MARVELL_88W8766P,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		.driver_data = (unsigned long) &mwifiex_pcie8766,
+		.driver_data = (unsigned long)&mwifiex_pcie8766,
 	},
 	{
 		PCIE_VENDOR_ID_MARVELL, PCIE_DEVICE_ID_MARVELL_88W8897,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		.driver_data = (unsigned long) &mwifiex_pcie8897,
+		.driver_data = (unsigned long)&mwifiex_pcie8897,
+	},
+	{
+		PCIE_VENDOR_ID_MARVELL, PCIE_DEVICE_ID_MARVELL_88W8997,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		.driver_data = (unsigned long)&mwifiex_pcie8997,
 	},
 	{},
 };
@@ -1082,6 +1087,7 @@ static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter *adapter)
 			card->txbd_rdptr++;
 			break;
 		case PCIE_DEVICE_ID_MARVELL_88W8897:
+		case PCIE_DEVICE_ID_MARVELL_88W8997:
 			card->txbd_rdptr += reg->ring_tx_start_ptr;
 			break;
 		}
@@ -1179,6 +1185,7 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb,
 			card->txbd_wrptr++;
 			break;
 		case PCIE_DEVICE_ID_MARVELL_88W8897:
+		case PCIE_DEVICE_ID_MARVELL_88W8997:
 			card->txbd_wrptr += reg->ring_tx_start_ptr;
 			break;
 		}
@@ -2733,3 +2740,4 @@ MODULE_VERSION(PCIE_VERSION);
 MODULE_LICENSE("GPL v2");
 MODULE_FIRMWARE(PCIE8766_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(PCIE8897_DEFAULT_FW_NAME);
+MODULE_FIRMWARE(PCIE8997_DEFAULT_FW_NAME);
diff --git a/drivers/net/wireless/mwifiex/pcie.h b/drivers/net/wireless/mwifiex/pcie.h
index 0e7ee8b..48e549c 100644
--- a/drivers/net/wireless/mwifiex/pcie.h
+++ b/drivers/net/wireless/mwifiex/pcie.h
@@ -30,10 +30,12 @@
 
 #define PCIE8766_DEFAULT_FW_NAME "mrvl/pcie8766_uapsta.bin"
 #define PCIE8897_DEFAULT_FW_NAME "mrvl/pcie8897_uapsta.bin"
+#define PCIE8997_DEFAULT_FW_NAME "mrvl/pcie8997_uapsta.bin"
 
 #define PCIE_VENDOR_ID_MARVELL              (0x11ab)
 #define PCIE_DEVICE_ID_MARVELL_88W8766P		(0x2b30)
 #define PCIE_DEVICE_ID_MARVELL_88W8897		(0x2b38)
+#define PCIE_DEVICE_ID_MARVELL_88W8997		(0x2b42)
 
 /* Constants for Buffer Descriptor (BD) rings */
 #define MWIFIEX_MAX_TXRX_BD			0x20
@@ -197,7 +199,38 @@ static const struct mwifiex_pcie_card_reg mwifiex_reg_8897 = {
 	.sleep_cookie = 0,
 	.fw_dump_ctrl = 0xcf4,
 	.fw_dump_start = 0xcf8,
-	.fw_dump_end = 0xcff
+	.fw_dump_end = 0xcff,
+};
+
+static const struct mwifiex_pcie_card_reg mwifiex_reg_8997 = {
+	.cmd_addr_lo = PCIE_SCRATCH_0_REG,
+	.cmd_addr_hi = PCIE_SCRATCH_1_REG,
+	.cmd_size = PCIE_SCRATCH_2_REG,
+	.fw_status = PCIE_SCRATCH_3_REG,
+	.cmdrsp_addr_lo = PCIE_SCRATCH_4_REG,
+	.cmdrsp_addr_hi = PCIE_SCRATCH_5_REG,
+	.tx_rdptr = 0xC1A4,
+	.tx_wrptr = 0xC1A8,
+	.rx_rdptr = 0xC1A8,
+	.rx_wrptr = 0xC1A4,
+	.evt_rdptr = PCIE_SCRATCH_10_REG,
+	.evt_wrptr = PCIE_SCRATCH_11_REG,
+	.drv_rdy = PCIE_SCRATCH_12_REG,
+	.tx_start_ptr = 16,
+	.tx_mask = 0x0FFF0000,
+	.tx_wrap_mask = 0x01FF0000,
+	.rx_mask = 0x00000FFF,
+	.rx_wrap_mask = 0x000001FF,
+	.tx_rollover_ind = BIT(28),
+	.rx_rollover_ind = BIT(12),
+	.evt_rollover_ind = MWIFIEX_BD_FLAG_EVT_ROLLOVER_IND,
+	.ring_flag_sop = MWIFIEX_BD_FLAG_SOP,
+	.ring_flag_eop = MWIFIEX_BD_FLAG_EOP,
+	.ring_flag_xs_sop = MWIFIEX_BD_FLAG_XS_SOP,
+	.ring_flag_xs_eop = MWIFIEX_BD_FLAG_XS_EOP,
+	.ring_tx_start_ptr = MWIFIEX_BD_FLAG_TX_START_PTR,
+	.pfu_enabled = 1,
+	.sleep_cookie = 0,
 };
 
 struct mwifiex_pcie_device {
@@ -227,6 +260,15 @@ static const struct mwifiex_pcie_device mwifiex_pcie8897 = {
 	.can_ext_scan = true,
 };
 
+static const struct mwifiex_pcie_device mwifiex_pcie8997 = {
+	.firmware       = PCIE8997_DEFAULT_FW_NAME,
+	.reg            = &mwifiex_reg_8997,
+	.blksz_fw_dl = MWIFIEX_PCIE_BLOCK_SIZE_FW_DNLD,
+	.tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K,
+	.can_dump_fw = false,
+	.can_ext_scan = true,
+};
+
 struct mwifiex_evt_buf_desc {
 	u64 paddr;
 	u16 len;
@@ -325,6 +367,7 @@ mwifiex_pcie_txbd_not_full(struct pcie_service_card *card)
 			return 1;
 		break;
 	case PCIE_DEVICE_ID_MARVELL_88W8897:
+	case PCIE_DEVICE_ID_MARVELL_88W8997:
 		if (((card->txbd_wrptr & reg->tx_mask) !=
 		     (card->txbd_rdptr & reg->tx_mask)) ||
 		    ((card->txbd_wrptr & reg->tx_rollover_ind) ==
diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
index e4c35ee..9904a77 100644
--- a/drivers/net/wireless/mwifiex/sdio.c
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -288,6 +288,8 @@ static int mwifiex_sdio_suspend(struct device *dev)
 #define SDIO_DEVICE_ID_MARVELL_8887   (0x9135)
 /* Device ID for SD8801 */
 #define SDIO_DEVICE_ID_MARVELL_8801   (0x9139)
+/* Device ID for SD8997 */
+#define SDIO_DEVICE_ID_MARVELL_8997   (0x9141)
 
 
 /* WLAN IDs */
@@ -304,6 +306,8 @@ static const struct sdio_device_id mwifiex_ids[] = {
 		.driver_data = (unsigned long)&mwifiex_sdio_sd8887},
 	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8801),
 		.driver_data = (unsigned long)&mwifiex_sdio_sd8801},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8997),
+		.driver_data = (unsigned long)&mwifiex_sdio_sd8997},
 	{},
 };
 
@@ -2531,3 +2535,4 @@ MODULE_FIRMWARE(SD8787_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(SD8797_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(SD8897_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(SD8887_DEFAULT_FW_NAME);
+MODULE_FIRMWARE(SD8997_DEFAULT_FW_NAME);
diff --git a/drivers/net/wireless/mwifiex/sdio.h b/drivers/net/wireless/mwifiex/sdio.h
index c44da61..cd149196 100644
--- a/drivers/net/wireless/mwifiex/sdio.h
+++ b/drivers/net/wireless/mwifiex/sdio.h
@@ -35,6 +35,7 @@
 #define SD8897_DEFAULT_FW_NAME "mrvl/sd8897_uapsta.bin"
 #define SD8887_DEFAULT_FW_NAME "mrvl/sd8887_uapsta.bin"
 #define SD8801_DEFAULT_FW_NAME "mrvl/sd8801_uapsta.bin"
+#define SD8997_DEFAULT_FW_NAME "mrvl/sd8997_uapsta.bin"
 
 #define BLOCK_MODE	1
 #define BYTE_MODE	0
@@ -364,6 +365,55 @@ static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8897 = {
 				 0x59, 0x5c, 0x5d},
 };
 
+static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8997 = {
+	.start_rd_port = 0,
+	.start_wr_port = 0,
+	.base_0_reg = 0xF8,
+	.base_1_reg = 0xF9,
+	.poll_reg = 0x5C,
+	.host_int_enable = UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK |
+			CMD_PORT_UPLD_INT_MASK | CMD_PORT_DNLD_INT_MASK,
+	.host_int_rsr_reg = 0x4,
+	.host_int_status_reg = 0x0C,
+	.host_int_mask_reg = 0x08,
+	.status_reg_0 = 0xE8,
+	.status_reg_1 = 0xE9,
+	.sdio_int_mask = 0xff,
+	.data_port_mask = 0xffffffff,
+	.io_port_0_reg = 0xE4,
+	.io_port_1_reg = 0xE5,
+	.io_port_2_reg = 0xE6,
+	.max_mp_regs = 196,
+	.rd_bitmap_l = 0x10,
+	.rd_bitmap_u = 0x11,
+	.rd_bitmap_1l = 0x12,
+	.rd_bitmap_1u = 0x13,
+	.wr_bitmap_l = 0x14,
+	.wr_bitmap_u = 0x15,
+	.wr_bitmap_1l = 0x16,
+	.wr_bitmap_1u = 0x17,
+	.rd_len_p0_l = 0x18,
+	.rd_len_p0_u = 0x19,
+	.card_misc_cfg_reg = 0xd8,
+	.card_cfg_2_1_reg = 0xd9,
+	.cmd_rd_len_0 = 0xc0,
+	.cmd_rd_len_1 = 0xc1,
+	.cmd_rd_len_2 = 0xc2,
+	.cmd_rd_len_3 = 0xc3,
+	.cmd_cfg_0 = 0xc4,
+	.cmd_cfg_1 = 0xc5,
+	.cmd_cfg_2 = 0xc6,
+	.cmd_cfg_3 = 0xc7,
+	.func1_dump_reg_start = 0x10,
+	.func1_dump_reg_end = 0x17,
+	.func1_scratch_reg = 0xe8,
+	.func1_spec_reg_num = 13,
+	.func1_spec_reg_table = {0x08, 0x58, 0x5C, 0x5D,
+				 0x60, 0x61, 0x62, 0x64,
+				 0x65, 0x66, 0x68, 0x69,
+				 0x6a},
+};
+
 static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8887 = {
 	.start_rd_port = 0,
 	.start_wr_port = 0,
@@ -472,6 +522,21 @@ static const struct mwifiex_sdio_device mwifiex_sdio_sd8897 = {
 	.can_ext_scan = true,
 };
 
+static const struct mwifiex_sdio_device mwifiex_sdio_sd8997 = {
+	.firmware = SD8997_DEFAULT_FW_NAME,
+	.reg = &mwifiex_reg_sd8997,
+	.max_ports = 32,
+	.mp_agg_pkt_limit = 16,
+	.tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K,
+	.mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_MAX,
+	.mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_MAX,
+	.supports_sdio_new_mode = true,
+	.has_control_mask = false,
+	.can_dump_fw = false,
+	.can_auto_tdls = false,
+	.can_ext_scan = true,
+};
+
 static const struct mwifiex_sdio_device mwifiex_sdio_sd8887 = {
 	.firmware = SD8887_DEFAULT_FW_NAME,
 	.reg = &mwifiex_reg_sd8887,
diff --git a/drivers/net/wireless/mwifiex/usb.c b/drivers/net/wireless/mwifiex/usb.c
index fbad99c..6eabd95 100644
--- a/drivers/net/wireless/mwifiex/usb.c
+++ b/drivers/net/wireless/mwifiex/usb.c
@@ -47,6 +47,11 @@ static struct usb_device_id mwifiex_usb_table[] = {
 	{USB_DEVICE_AND_INTERFACE_INFO(USB8XXX_VID, USB8897_PID_2,
 				       USB_CLASS_VENDOR_SPEC,
 				       USB_SUBCLASS_VENDOR_SPEC, 0xff)},
+	/* 8997 */
+	{USB_DEVICE(USB8XXX_VID, USB8997_PID_1)},
+	{USB_DEVICE_AND_INTERFACE_INFO(USB8XXX_VID, USB8997_PID_2,
+				       USB_CLASS_VENDOR_SPEC,
+				       USB_SUBCLASS_VENDOR_SPEC, 0xff)},
 	{ }	/* Terminating entry */
 };
 
@@ -382,12 +387,14 @@ static int mwifiex_usb_probe(struct usb_interface *intf,
 	case USB8797_PID_1:
 	case USB8801_PID_1:
 	case USB8897_PID_1:
+	case USB8997_PID_1:
 		card->usb_boot_state = USB8XXX_FW_DNLD;
 		break;
 	case USB8766_PID_2:
 	case USB8797_PID_2:
 	case USB8801_PID_2:
 	case USB8897_PID_2:
+	case USB8997_PID_2:
 		card->usb_boot_state = USB8XXX_FW_READY;
 		break;
 	default:
@@ -814,6 +821,12 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter)
 	adapter->dev = &card->udev->dev;
 
 	switch (le16_to_cpu(card->udev->descriptor.idProduct)) {
+	case USB8997_PID_1:
+	case USB8997_PID_2:
+		adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K;
+		strcpy(adapter->fw_name, USB8997_DEFAULT_FW_NAME);
+		adapter->ext_scan = true;
+		break;
 	case USB8897_PID_1:
 	case USB8897_PID_2:
 		adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K;
@@ -1121,3 +1134,4 @@ MODULE_FIRMWARE(USB8766_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(USB8797_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(USB8801_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(USB8897_DEFAULT_FW_NAME);
+MODULE_FIRMWARE(USB8997_DEFAULT_FW_NAME);
diff --git a/drivers/net/wireless/mwifiex/usb.h b/drivers/net/wireless/mwifiex/usb.h
index 57e1a57..f0051f8 100644
--- a/drivers/net/wireless/mwifiex/usb.h
+++ b/drivers/net/wireless/mwifiex/usb.h
@@ -32,6 +32,8 @@
 #define USB8897_PID_2		0x2046
 #define USB8801_PID_1		0x2049
 #define USB8801_PID_2		0x204a
+#define USB8997_PID_1		0x204d
+#define USB8997_PID_2		0x204e
 
 
 #define USB8XXX_FW_DNLD		1
@@ -46,6 +48,7 @@
 #define USB8797_DEFAULT_FW_NAME	"mrvl/usb8797_uapsta.bin"
 #define USB8801_DEFAULT_FW_NAME	"mrvl/usb8801_uapsta.bin"
 #define USB8897_DEFAULT_FW_NAME	"mrvl/usb8897_uapsta.bin"
+#define USB8997_DEFAULT_FW_NAME	"mrvl/usb8997_uapsta.bin"
 
 #define FW_DNLD_TX_BUF_SIZE	620
 #define FW_DNLD_RX_BUF_SIZE	2048
-- 
1.8.1.4

[PATCH v3 2/3] mwifiex: add firmware dump support for SD8997

[Amitkumar Karwar]

From: Zhaoyang Liu <liuzy@marvell.com>

This patch adds firmware dump feature for SD8997 chipset.
The difference here is only one memory type is needed
to save all firmware information. Device dump information
will be uploaded to usersapace file.

Signed-off-by: Zhaoyang Liu <liuzy@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
---
 drivers/net/wireless/mwifiex/sdio.c | 147 +++++++++++++++++++++++++++++++++---
 drivers/net/wireless/mwifiex/sdio.h |  11 ++-
 2 files changed, 148 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
index 9904a77..7cef27e9 100644
--- a/drivers/net/wireless/mwifiex/sdio.c
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -51,6 +51,10 @@ static unsigned long iface_work_flags;
 
 static struct semaphore add_remove_card_sem;
 
+static struct memory_type_mapping generic_mem_type_map[] = {
+	{"DUMP", NULL, 0, 0xDD},
+};
+
 static struct memory_type_mapping mem_type_mapping_tbl[] = {
 	{"ITCM", NULL, 0, 0xF0},
 	{"DTCM", NULL, 0, 0xF1},
@@ -108,6 +112,7 @@ mwifiex_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id)
 		card->mp_tx_agg_buf_size = data->mp_tx_agg_buf_size;
 		card->mp_rx_agg_buf_size = data->mp_rx_agg_buf_size;
 		card->can_dump_fw = data->can_dump_fw;
+		card->fw_dump_enh = data->fw_dump_enh;
 		card->can_auto_tdls = data->can_auto_tdls;
 		card->can_ext_scan = data->can_ext_scan;
 	}
@@ -1969,8 +1974,13 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter)
 	adapter->dev = &func->dev;
 
 	strcpy(adapter->fw_name, card->firmware);
-	adapter->mem_type_mapping_tbl = mem_type_mapping_tbl;
-	adapter->num_mem_types = ARRAY_SIZE(mem_type_mapping_tbl);
+	if (card->fw_dump_enh) {
+		adapter->mem_type_mapping_tbl = generic_mem_type_map;
+		adapter->num_mem_types = 1;
+	} else {
+		adapter->mem_type_mapping_tbl = mem_type_mapping_tbl;
+		adapter->num_mem_types = ARRAY_SIZE(mem_type_mapping_tbl);
+	}
 
 	return 0;
 }
@@ -2163,8 +2173,8 @@ rdwr_status mwifiex_sdio_rdwr_firmware(struct mwifiex_adapter *adapter,
 	int ret, tries;
 	u8 ctrl_data = 0;
 
-	sdio_writeb(card->func, FW_DUMP_HOST_READY, card->reg->fw_dump_ctrl,
-		    &ret);
+	sdio_writeb(card->func, card->reg->fw_dump_host_ready,
+		    card->reg->fw_dump_ctrl, &ret);
 	if (ret) {
 		mwifiex_dbg(adapter, ERROR, "SDIO Write ERR\n");
 		return RDWR_STATUS_FAILURE;
@@ -2180,10 +2190,10 @@ rdwr_status mwifiex_sdio_rdwr_firmware(struct mwifiex_adapter *adapter,
 			break;
 		if (doneflag && ctrl_data == doneflag)
 			return RDWR_STATUS_DONE;
-		if (ctrl_data != FW_DUMP_HOST_READY) {
+		if (ctrl_data != card->reg->fw_dump_host_ready) {
 			mwifiex_dbg(adapter, WARN,
-				    "The ctrl reg was changed, re-try again!\n");
-			sdio_writeb(card->func, FW_DUMP_HOST_READY,
+				    "The ctrl reg was changed, re-try again\n");
+			sdio_writeb(card->func, card->reg->fw_dump_host_ready,
 				    card->reg->fw_dump_ctrl, &ret);
 			if (ret) {
 				mwifiex_dbg(adapter, ERROR, "SDIO write err\n");
@@ -2192,7 +2202,7 @@ rdwr_status mwifiex_sdio_rdwr_firmware(struct mwifiex_adapter *adapter,
 		}
 		usleep_range(100, 200);
 	}
-	if (ctrl_data == FW_DUMP_HOST_READY) {
+	if (ctrl_data == card->reg->fw_dump_host_ready) {
 		mwifiex_dbg(adapter, ERROR,
 			    "Fail to pull ctrl_data\n");
 		return RDWR_STATUS_FAILURE;
@@ -2325,10 +2335,129 @@ done:
 	sdio_release_host(card->func);
 }
 
+static void mwifiex_sdio_generic_fw_dump(struct mwifiex_adapter *adapter)
+{
+	struct sdio_mmc_card *card = adapter->card;
+	struct memory_type_mapping *entry = &generic_mem_type_map[0];
+	unsigned int reg, reg_start, reg_end;
+	u8 start_flag = 0, done_flag = 0;
+	u8 *dbg_ptr, *end_ptr;
+	enum rdwr_status stat;
+	int ret = -1, tries;
+
+	if (!card->fw_dump_enh)
+		return;
+
+	if (entry->mem_ptr) {
+		vfree(entry->mem_ptr);
+		entry->mem_ptr = NULL;
+	}
+	entry->mem_size = 0;
+
+	mwifiex_pm_wakeup_card(adapter);
+	sdio_claim_host(card->func);
+
+	mwifiex_dbg(adapter, MSG, "== mwifiex firmware dump start ==\n");
+
+	stat = mwifiex_sdio_rdwr_firmware(adapter, done_flag);
+	if (stat == RDWR_STATUS_FAILURE)
+		goto done;
+
+	reg_start = card->reg->fw_dump_start;
+	reg_end = card->reg->fw_dump_end;
+	for (reg = reg_start; reg <= reg_end; reg++) {
+		for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
+			start_flag = sdio_readb(card->func, reg, &ret);
+			if (ret) {
+				mwifiex_dbg(adapter, ERROR,
+					    "SDIO read err\n");
+				goto done;
+			}
+			if (start_flag == 0)
+				break;
+			if (tries == MAX_POLL_TRIES) {
+				mwifiex_dbg(adapter, ERROR,
+					    "FW not ready to dump\n");
+				ret = -1;
+				goto done;
+			}
+		}
+		usleep_range(100, 200);
+	}
+
+	entry->mem_ptr = vmalloc(0xf0000 + 1);
+	if (!entry->mem_ptr) {
+		ret = -1;
+		goto done;
+	}
+	dbg_ptr = entry->mem_ptr;
+	entry->mem_size = 0xf0000;
+	end_ptr = dbg_ptr + entry->mem_size;
+
+	done_flag = entry->done_flag;
+	mwifiex_dbg(adapter, DUMP,
+		    "Start %s output, please wait...\n", entry->mem_name);
+
+	while (true) {
+		stat = mwifiex_sdio_rdwr_firmware(adapter, done_flag);
+		if (stat == RDWR_STATUS_FAILURE)
+			goto done;
+		for (reg = reg_start; reg <= reg_end; reg++) {
+			*dbg_ptr = sdio_readb(card->func, reg, &ret);
+			if (ret) {
+				mwifiex_dbg(adapter, ERROR,
+					    "SDIO read err\n");
+				goto done;
+			}
+			dbg_ptr++;
+			if (dbg_ptr >= end_ptr) {
+				u8 *tmp_ptr;
+
+				tmp_ptr = vmalloc(entry->mem_size + 0x4000 + 1);
+				if (!tmp_ptr)
+					goto done;
+
+				memcpy(tmp_ptr, entry->mem_ptr,
+				       entry->mem_size);
+				vfree(entry->mem_ptr);
+				entry->mem_ptr = tmp_ptr;
+				tmp_ptr = NULL;
+				dbg_ptr = entry->mem_ptr + entry->mem_size;
+				entry->mem_size += 0x4000;
+				end_ptr = entry->mem_ptr + entry->mem_size;
+			}
+		}
+		if (stat == RDWR_STATUS_DONE) {
+			entry->mem_size = dbg_ptr - entry->mem_ptr;
+			mwifiex_dbg(adapter, DUMP, "dump %s done size=0x%x\n",
+				    entry->mem_name, entry->mem_size);
+			ret = 0;
+			break;
+		}
+	}
+	mwifiex_dbg(adapter, MSG, "== mwifiex firmware dump end ==\n");
+
+done:
+	if (ret) {
+		mwifiex_dbg(adapter, ERROR, "firmware dump failed\n");
+		if (entry->mem_ptr) {
+			vfree(entry->mem_ptr);
+			entry->mem_ptr = NULL;
+		}
+		entry->mem_size = 0;
+	}
+	sdio_release_host(card->func);
+}
+
 static void mwifiex_sdio_device_dump_work(struct mwifiex_adapter *adapter)
 {
+	struct sdio_mmc_card *card = adapter->card;
+
 	mwifiex_drv_info_dump(adapter);
-	mwifiex_sdio_fw_dump(adapter);
+	if (card->fw_dump_enh)
+		mwifiex_sdio_generic_fw_dump(adapter);
+	else
+		mwifiex_sdio_fw_dump(adapter);
 	mwifiex_upload_device_dump(adapter);
 }
 
diff --git a/drivers/net/wireless/mwifiex/sdio.h b/drivers/net/wireless/mwifiex/sdio.h
index cd149196..b9fbc5c 100644
--- a/drivers/net/wireless/mwifiex/sdio.h
+++ b/drivers/net/wireless/mwifiex/sdio.h
@@ -223,6 +223,7 @@ struct mwifiex_sdio_card_reg {
 	u8 cmd_cfg_1;
 	u8 cmd_cfg_2;
 	u8 cmd_cfg_3;
+	u8 fw_dump_host_ready;
 	u8 fw_dump_ctrl;
 	u8 fw_dump_start;
 	u8 fw_dump_end;
@@ -258,6 +259,7 @@ struct sdio_mmc_card {
 	bool supports_sdio_new_mode;
 	bool has_control_mask;
 	bool can_dump_fw;
+	bool fw_dump_enh;
 	bool can_auto_tdls;
 	bool can_ext_scan;
 
@@ -279,6 +281,7 @@ struct mwifiex_sdio_device {
 	bool supports_sdio_new_mode;
 	bool has_control_mask;
 	bool can_dump_fw;
+	bool fw_dump_enh;
 	bool can_auto_tdls;
 	bool can_ext_scan;
 };
@@ -354,6 +357,7 @@ static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8897 = {
 	.cmd_cfg_1 = 0xb9,
 	.cmd_cfg_2 = 0xba,
 	.cmd_cfg_3 = 0xbb,
+	.fw_dump_host_ready = 0xee,
 	.fw_dump_ctrl = 0xe2,
 	.fw_dump_start = 0xe3,
 	.fw_dump_end = 0xea,
@@ -404,6 +408,10 @@ static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8997 = {
 	.cmd_cfg_1 = 0xc5,
 	.cmd_cfg_2 = 0xc6,
 	.cmd_cfg_3 = 0xc7,
+	.fw_dump_host_ready = 0xcc,
+	.fw_dump_ctrl = 0xf0,
+	.fw_dump_start = 0xf1,
+	.fw_dump_end = 0xf8,
 	.func1_dump_reg_start = 0x10,
 	.func1_dump_reg_end = 0x17,
 	.func1_scratch_reg = 0xe8,
@@ -532,7 +540,8 @@ static const struct mwifiex_sdio_device mwifiex_sdio_sd8997 = {
 	.mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_MAX,
 	.supports_sdio_new_mode = true,
 	.has_control_mask = false,
-	.can_dump_fw = false,
+	.can_dump_fw = true,
+	.fw_dump_enh = true,
 	.can_auto_tdls = false,
 	.can_ext_scan = true,
 };
-- 
1.8.1.4

[PATCH v3 3/3] mwifiex: fix unable to connect hidden SSID AP on DFS channel

[Amitkumar Karwar]

From: chunfan chen <jeffc@marvell.com>

We will check if any hidden SSID found in passive scan channels
and do specific SSID active scan for those channels.

Signed-off-by: chunfan chen <jeffc@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
---
v2: Corrected hidden SSID detection logic as per Paul Stewart's
    comment
v3: Make sure not to have duplicate channel entries in
    hidden_chan table (Paul Stewart)
    Replace if (x == 0) checks with if (!x)
    Don't copy unfilled entries in hidden chan table
---
drivers/net/wireless/mwifiex/fw.h   |   1 +
 drivers/net/wireless/mwifiex/init.c |   2 +-
 drivers/net/wireless/mwifiex/main.h |   2 +
 drivers/net/wireless/mwifiex/scan.c | 143 +++++++++++++++++++++++++++++++++---
 4 files changed, 136 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 9a8c1832..3ec2ac8 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -685,6 +685,7 @@ struct mwifiex_fw_chan_stats {
 enum mwifiex_chan_scan_mode_bitmasks {
 	MWIFIEX_PASSIVE_SCAN = BIT(0),
 	MWIFIEX_DISABLE_CHAN_FILT = BIT(1),
+	MWIFIEX_HIDDEN_SSID_REPORT = BIT(4),
 };
 
 struct mwifiex_chan_scan_param_set {
diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c
index 7a970c2..5d3ae63 100644
--- a/drivers/net/wireless/mwifiex/init.c
+++ b/drivers/net/wireless/mwifiex/init.c
@@ -301,7 +301,7 @@ static void mwifiex_init_adapter(struct mwifiex_adapter *adapter)
 	adapter->iface_limit.sta_intf = MWIFIEX_MAX_STA_NUM;
 	adapter->iface_limit.uap_intf = MWIFIEX_MAX_UAP_NUM;
 	adapter->iface_limit.p2p_intf = MWIFIEX_MAX_P2P_NUM;
-
+	adapter->active_scan_triggered = false;
 	setup_timer(&adapter->wakeup_timer, wakeup_timer_fn,
 		    (unsigned long)adapter);
 }
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index face747..6b95121 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -666,6 +666,7 @@ struct mwifiex_private {
 	struct mwifiex_11h_intf_state state_11h;
 	struct mwifiex_ds_mem_rw mem_rw;
 	struct sk_buff_head bypass_txq;
+	struct mwifiex_user_scan_chan hidden_chan[MWIFIEX_USER_SCAN_CHAN_MAX];
 };
 
 
@@ -986,6 +987,7 @@ struct mwifiex_adapter {
 	u8 coex_tx_win_size;
 	u8 coex_rx_win_size;
 	bool drcs_enabled;
+	u8 active_scan_triggered;
 };
 
 void mwifiex_process_tx_queue(struct mwifiex_adapter *adapter);
diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c
index ef8da8e..5847863 100644
--- a/drivers/net/wireless/mwifiex/scan.c
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -527,7 +527,8 @@ mwifiex_scan_create_channel_list(struct mwifiex_private *priv,
 
 			if (ch->flags & IEEE80211_CHAN_NO_IR)
 				scan_chan_list[chan_idx].chan_scan_mode_bitmap
-					|= MWIFIEX_PASSIVE_SCAN;
+					|= (MWIFIEX_PASSIVE_SCAN |
+					    MWIFIEX_HIDDEN_SSID_REPORT);
 			else
 				scan_chan_list[chan_idx].chan_scan_mode_bitmap
 					&= ~MWIFIEX_PASSIVE_SCAN;
@@ -1049,7 +1050,8 @@ mwifiex_config_scan(struct mwifiex_private *priv,
 			if (scan_type == MWIFIEX_SCAN_TYPE_PASSIVE)
 				(scan_chan_list +
 				 chan_idx)->chan_scan_mode_bitmap
-					|= MWIFIEX_PASSIVE_SCAN;
+					|= (MWIFIEX_PASSIVE_SCAN |
+					    MWIFIEX_HIDDEN_SSID_REPORT);
 			else
 				(scan_chan_list +
 				 chan_idx)->chan_scan_mode_bitmap
@@ -1600,6 +1602,62 @@ int mwifiex_check_network_compatibility(struct mwifiex_private *priv,
 	return ret;
 }
 
+/* This function checks if SSID string contains all zeroes or length is zero */
+static bool mwifiex_is_hidden_ssid(struct cfg80211_ssid *ssid)
+{
+	int idx;
+
+	for (idx = 0; idx < ssid->ssid_len; idx++) {
+		if (ssid->ssid[idx])
+			return false;
+	}
+
+	return true;
+}
+
+/* This function checks if any hidden SSID found in passive scan channels
+ * and save those channels for specific SSID active scan
+ */
+static int mwifiex_save_hidden_ssid_channels(struct mwifiex_private *priv,
+					     struct cfg80211_bss *bss)
+{
+	struct mwifiex_bssdescriptor *bss_desc;
+	int ret;
+	int chid;
+
+	/* Allocate and fill new bss descriptor */
+	bss_desc = kzalloc(sizeof(*bss_desc), GFP_KERNEL);
+	if (!bss_desc)
+		return -ENOMEM;
+
+	ret = mwifiex_fill_new_bss_desc(priv, bss, bss_desc);
+	if (ret)
+		goto done;
+
+	if (mwifiex_is_hidden_ssid(&bss_desc->ssid)) {
+		mwifiex_dbg(priv->adapter, INFO, "found hidden SSID\n");
+		for (chid = 0 ; chid < MWIFIEX_USER_SCAN_CHAN_MAX; chid++) {
+			if (priv->hidden_chan[chid].chan_number ==
+			    bss->channel->hw_value)
+				break;
+
+			if (!priv->hidden_chan[chid].chan_number) {
+				priv->hidden_chan[chid].chan_number =
+					bss->channel->hw_value;
+				priv->hidden_chan[chid].radio_type =
+					bss->channel->band;
+				priv->hidden_chan[chid].scan_type =
+					MWIFIEX_SCAN_TYPE_ACTIVE;
+				break;
+			}
+		}
+	}
+
+done:
+	kfree(bss_desc);
+	return 0;
+}
+
 static int mwifiex_update_curr_bss_params(struct mwifiex_private *priv,
 					  struct cfg80211_bss *bss)
 {
@@ -1789,6 +1847,14 @@ mwifiex_parse_single_response_buf(struct mwifiex_private *priv, u8 **bss_info,
 				    .mac_address, ETH_ALEN))
 				mwifiex_update_curr_bss_params(priv, bss);
 			cfg80211_put_bss(priv->wdev.wiphy, bss);
+
+			if ((chan->flags & IEEE80211_CHAN_RADAR) ||
+			    (chan->flags & IEEE80211_CHAN_NO_IR)) {
+				mwifiex_dbg(adapter, INFO,
+					    "radar or passive channel %d\n",
+					    channel);
+				mwifiex_save_hidden_ssid_channels(priv, bss);
+			}
 		}
 	} else {
 		mwifiex_dbg(adapter, WARN, "missing BSS channel IE\n");
@@ -1812,6 +1878,57 @@ static void mwifiex_complete_scan(struct mwifiex_private *priv)
 	}
 }
 
+/* This function checks if any hidden SSID found in passive scan channels
+ * and do specific SSID active scan for those channels
+ */
+static int
+mwifiex_active_scan_req_for_passive_chan(struct mwifiex_private *priv)
+{
+	int ret;
+	struct mwifiex_adapter *adapter = priv->adapter;
+	u8 id = 0;
+	struct mwifiex_user_scan_cfg  *user_scan_cfg;
+
+	if (adapter->active_scan_triggered) {
+		adapter->active_scan_triggered = false;
+		return 0;
+	}
+
+	if (!priv->hidden_chan[0].chan_number) {
+		mwifiex_dbg(adapter, INFO, "No BSS with hidden SSID found on DFS channels\n");
+		return 0;
+	}
+	user_scan_cfg = kzalloc(sizeof(*user_scan_cfg), GFP_KERNEL);
+
+	if (!user_scan_cfg)
+		return -ENOMEM;
+
+	memset(user_scan_cfg, 0, sizeof(*user_scan_cfg));
+
+	for (id = 0; id < MWIFIEX_USER_SCAN_CHAN_MAX; id++) {
+		if (!priv->hidden_chan[id].chan_number)
+			break;
+		memcpy(&user_scan_cfg->chan_list[id],
+		       &priv->hidden_chan[id],
+		       sizeof(struct mwifiex_user_scan_chan));
+	}
+
+	adapter->active_scan_triggered = true;
+	user_scan_cfg->num_ssids = priv->scan_request->n_ssids;
+	user_scan_cfg->ssid_list = priv->scan_request->ssids;
+
+	ret = mwifiex_scan_networks(priv, user_scan_cfg);
+	kfree(user_scan_cfg);
+
+	memset(&priv->hidden_chan, 0, sizeof(priv->hidden_chan));
+
+	if (ret) {
+		dev_err(priv->adapter->dev, "scan failed: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
 static void mwifiex_check_next_scan_command(struct mwifiex_private *priv)
 {
 	struct mwifiex_adapter *adapter = priv->adapter;
@@ -1825,6 +1942,8 @@ static void mwifiex_check_next_scan_command(struct mwifiex_private *priv)
 		adapter->scan_processing = false;
 		spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
 
+		mwifiex_active_scan_req_for_passive_chan(priv);
+
 		if (!adapter->ext_scan)
 			mwifiex_complete_scan(priv);
 
@@ -1851,15 +1970,17 @@ static void mwifiex_check_next_scan_command(struct mwifiex_private *priv)
 		adapter->scan_processing = false;
 		spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
 
-		if (priv->scan_request) {
-			mwifiex_dbg(adapter, INFO,
-				    "info: aborting scan\n");
-			cfg80211_scan_done(priv->scan_request, 1);
-			priv->scan_request = NULL;
-		} else {
-			priv->scan_aborting = false;
-			mwifiex_dbg(adapter, INFO,
-				    "info: scan already aborted\n");
+		if (!adapter->active_scan_triggered) {
+			if (priv->scan_request) {
+				mwifiex_dbg(adapter, INFO,
+					    "info: aborting scan\n");
+				cfg80211_scan_done(priv->scan_request, 1);
+				priv->scan_request = NULL;
+			} else {
+				priv->scan_aborting = false;
+				mwifiex_dbg(adapter, INFO,
+					    "info: scan already aborted\n");
+			}
 		}
 	} else {
 		/* Get scan command from scan_pending_q and put to
-- 
1.8.1.4

Re: [v3,1/3] mwifiex: add support for 8997 chipset

[Kalle Valo]

> From: Zhaoyang Liu <liuzy@marvell.com>
> 
> This patch adds support for 8997 chipset to mwifiex
> with SDIO/PCIe/USB interface.
> 
> The corresponding firmware image files are located in:
> "mrvl/sd8997_uapsta.bin"
> "mrvl/pcie8997_uapsta.bin"
> "mrvl/usb8997_uapsta.bin"
> 
> Signed-off-by: Zhaoyang Liu <liuzy@marvell.com>
> Signed-off-by: Cathy Luo <cluo@marvell.com>
> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>

Thanks, 3 patches applied to wireless-drivers-next.git:

6d85ef00d9df mwifiex: add support for 8997 chipset
eee7f1961b9d mwifiex: add firmware dump support for SD8997
2375fa2b36fe mwifiex: fix unable to connect hidden SSID AP on DFS channel

Kalle Valo