* [U-Boot] [PATCH] rpi: set fdt_addr_r to 0x00000100 to match default device_tree_address
@ 2015-08-22 10:27 Jonathan Liu
2015-08-28 21:02 ` [U-Boot] " Tom Rini
0 siblings, 1 reply; 2+ messages in thread
From: Jonathan Liu @ 2015-08-22 10:27 UTC (permalink / raw)
To: u-boot
Raspberry Pi by default loads the FDT to 0x00000100 so set fdt_addr_r to
match and move scriptaddr to 0x02000000 to avoid clobbering the FDT.
Signed-off-by: Jonathan Liu <net147@gmail.com>
---
include/configs/rpi-common.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/configs/rpi-common.h b/include/configs/rpi-common.h
index 8830a10..06836cd 100644
--- a/include/configs/rpi-common.h
+++ b/include/configs/rpi-common.h
@@ -163,10 +163,10 @@
* for the FDT/DTB to be up to 1M, which is hopefully plenty.
*/
#define ENV_MEM_LAYOUT_SETTINGS \
- "scriptaddr=0x00000000\0" \
+ "fdt_addr_r=0x00000100\0" \
"pxefile_addr_r=0x00100000\0" \
"kernel_addr_r=0x01000000\0" \
- "fdt_addr_r=0x02000000\0" \
+ "scriptaddr=0x02000000\0" \
"ramdisk_addr_r=0x02100000\0" \
#define BOOT_TARGET_DEVICES(func) \
--
2.5.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2015-08-28 21:02 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-08-22 10:27 [U-Boot] [PATCH] rpi: set fdt_addr_r to 0x00000100 to match default device_tree_address Jonathan Liu
2015-08-28 21:02 ` [U-Boot] " Tom Rini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.