All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
To: benh@kernel.crashing.org, paulus@samba.org, mpe@ellerman.id.au
Cc: linuxppc-dev@lists.ozlabs.org,
	"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Subject: [PATCH 22/31] powerpc/mm: Don't track subpage valid bit in pte_t
Date: Mon, 21 Sep 2015 12:10:49 +0530	[thread overview]
Message-ID: <1442817658-2588-23-git-send-email-aneesh.kumar@linux.vnet.ibm.com> (raw)
In-Reply-To: <1442817658-2588-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com>

This free up 11 bits in pte_t. In the later patch we also change
the pte_t format so that we can start supporting migration pte
at pmd level.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/book3s/64/hash-4k.h  | 10 +--------
 arch/powerpc/include/asm/book3s/64/hash-64k.h | 29 ++-------------------------
 arch/powerpc/include/asm/book3s/64/hash.h     |  4 ++++
 arch/powerpc/mm/hash64_64k.c                  |  4 ++--
 arch/powerpc/mm/hash_low_64.S                 |  6 +-----
 arch/powerpc/mm/hugetlbpage-hash64.c          |  5 +----
 arch/powerpc/mm/pgtable_64.c                  |  2 +-
 7 files changed, 12 insertions(+), 48 deletions(-)

diff --git a/arch/powerpc/include/asm/book3s/64/hash-4k.h b/arch/powerpc/include/asm/book3s/64/hash-4k.h
index 537eacecf6e9..75e8b9326e4b 100644
--- a/arch/powerpc/include/asm/book3s/64/hash-4k.h
+++ b/arch/powerpc/include/asm/book3s/64/hash-4k.h
@@ -47,17 +47,9 @@
 /* Bits to mask out from a PGD to get to the PUD page */
 #define PGD_MASKED_BITS		0
 
-/* PTE bits */
-#define _PAGE_HASHPTE	0x0400 /* software: pte has an associated HPTE */
-#define _PAGE_SECONDARY 0x8000 /* software: HPTE is in secondary group */
-#define _PAGE_GROUP_IX  0x7000 /* software: HPTE index within group */
-#define _PAGE_F_SECOND  _PAGE_SECONDARY
-#define _PAGE_F_GIX     _PAGE_GROUP_IX
-#define _PAGE_SPECIAL	0x10000 /* software: special page */
-
 /* PTE flags to conserve for HPTE identification */
 #define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | \
-			 _PAGE_SECONDARY | _PAGE_GROUP_IX)
+			 _PAGE_F_SECOND | _PAGE_F_GIX)
 
 /* shift to put page number into pte */
 #define PTE_RPN_SHIFT	(17)
diff --git a/arch/powerpc/include/asm/book3s/64/hash-64k.h b/arch/powerpc/include/asm/book3s/64/hash-64k.h
index dafc2f31c843..b363d73ca225 100644
--- a/arch/powerpc/include/asm/book3s/64/hash-64k.h
+++ b/arch/powerpc/include/asm/book3s/64/hash-64k.h
@@ -31,33 +31,8 @@
 /* Bits to mask out from a PGD/PUD to get to the PMD page */
 #define PUD_MASKED_BITS		0x1ff
 
-/* Additional PTE bits (don't change without checking asm in hash_low.S) */
-#define _PAGE_SPECIAL	0x00000400 /* software: special page */
-#define _PAGE_HPTE_SUB	0x0ffff000 /* combo only: sub pages HPTE bits */
-#define _PAGE_HPTE_SUB0	0x08000000 /* combo only: first sub page */
-#define _PAGE_COMBO	0x10000000 /* this is a combo 4k page */
-#define _PAGE_4K_PFN	0x20000000 /* PFN is for a single 4k page */
-
-/* For 64K page, we don't have a separate _PAGE_HASHPTE bit. Instead,
- * we set that to be the whole sub-bits mask. The C code will only
- * test this, so a multi-bit mask will work. For combo pages, this
- * is equivalent as effectively, the old _PAGE_HASHPTE was an OR of
- * all the sub bits. For real 64k pages, we now have the assembly set
- * _PAGE_HPTE_SUB0 in addition to setting the HIDX bits which overlap
- * that mask. This is fine as long as the HIDX bits are never set on
- * a PTE that isn't hashed, which is the case today.
- *
- * A little nit is for the huge page C code, which does the hashing
- * in C, we need to provide which bit to use.
- */
-#define _PAGE_HASHPTE	_PAGE_HPTE_SUB
-
-/* Note the full page bits must be in the same location as for normal
- * 4k pages as the same assembly will be used to insert 64K pages
- * whether the kernel has CONFIG_PPC_64K_PAGES or not
- */
-#define _PAGE_F_SECOND  0x00008000 /* full page: hidx bits */
-#define _PAGE_F_GIX     0x00007000 /* full page: hidx bits */
+#define _PAGE_COMBO	0x00020000 /* this is a combo 4k page */
+#define _PAGE_4K_PFN	0x00040000 /* PFN is for a single 4k page */
 
 /* PTE flags to conserve for HPTE identification */
 #define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | _PAGE_COMBO)
diff --git a/arch/powerpc/include/asm/book3s/64/hash.h b/arch/powerpc/include/asm/book3s/64/hash.h
index 32a1f94201d0..f377757d2cbf 100644
--- a/arch/powerpc/include/asm/book3s/64/hash.h
+++ b/arch/powerpc/include/asm/book3s/64/hash.h
@@ -83,7 +83,11 @@
 #define _PAGE_DIRTY		0x0080 /* C: page changed */
 #define _PAGE_ACCESSED		0x0100 /* R: page referenced */
 #define _PAGE_RW		0x0200 /* software: user write access allowed */
+#define _PAGE_HASHPTE		0x0400 /* software: pte has an associated HPTE */
 #define _PAGE_BUSY		0x0800 /* software: PTE & hash are busy */
+#define _PAGE_F_GIX		0x7000 /* full page: hidx bits */
+#define _PAGE_F_SECOND		0x8000 /* Whether to use secondary hash or not */
+#define _PAGE_SPECIAL		0x10000 /* software: special page */
 
 /* No separate kernel read-only */
 #define _PAGE_KERNEL_RW		(_PAGE_RW | _PAGE_DIRTY) /* user access blocked by key */
diff --git a/arch/powerpc/mm/hash64_64k.c b/arch/powerpc/mm/hash64_64k.c
index a21bf836ad95..7e1359e008b4 100644
--- a/arch/powerpc/mm/hash64_64k.c
+++ b/arch/powerpc/mm/hash64_64k.c
@@ -127,7 +127,7 @@ int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
 	 */
 	if (!(old_pte & _PAGE_COMBO)) {
 		flush_hash_page(vpn, rpte, MMU_PAGE_64K, ssize, flags);
-		old_pte &= ~_PAGE_HPTE_SUB;
+		old_pte &= ~_PAGE_HASHPTE | _PAGE_F_GIX | _PAGE_F_SECOND;
 		goto htab_insert_hpte;
 	}
 	/*
@@ -214,7 +214,7 @@ repeat:
 	 * nobody is undating hidx.
 	 */
 	rpte.hidx[subpg_index] = (unsigned char)(slot << 4 | 0x1 << 3);
-	new_pte |= _PAGE_HPTE_SUB0;
+	new_pte |= _PAGE_HASHPTE;
 	/*
 	 * check __real_pte for details on matching smp_rmb()
 	 */
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
index 6b4d4c1d0628..359839a57f26 100644
--- a/arch/powerpc/mm/hash_low_64.S
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -285,7 +285,7 @@ htab_modify_pte:
 
 	/* Secondary group ? if yes, get a inverted hash value */
 	mr	r5,r28
-	andi.	r0,r31,_PAGE_SECONDARY
+	andi.	r0,r31,_PAGE_F_SECOND
 	beq	1f
 	not	r5,r5
 1:
@@ -473,11 +473,7 @@ ht64_insert_pte:
 	lis	r0,_PAGE_HPTEFLAGS@h
 	ori	r0,r0,_PAGE_HPTEFLAGS@l
 	andc	r30,r30,r0
-#ifdef CONFIG_PPC_64K_PAGES
-	oris	r30,r30,_PAGE_HPTE_SUB0@h
-#else
 	ori	r30,r30,_PAGE_HASHPTE
-#endif
 	/* Phyical address in r5 */
 	rldicl	r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
 	sldi	r5,r5,PAGE_SHIFT
diff --git a/arch/powerpc/mm/hugetlbpage-hash64.c b/arch/powerpc/mm/hugetlbpage-hash64.c
index d94b1af53a93..7584e8445512 100644
--- a/arch/powerpc/mm/hugetlbpage-hash64.c
+++ b/arch/powerpc/mm/hugetlbpage-hash64.c
@@ -91,11 +91,8 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 		pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT;
 
 		/* clear HPTE slot informations in new PTE */
-#ifdef CONFIG_PPC_64K_PAGES
-		new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HPTE_SUB0;
-#else
 		new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HASHPTE;
-#endif
+
 		/* Add in WIMG bits */
 		rflags |= (new_pte & (_PAGE_WRITETHRU | _PAGE_NO_CACHE |
 				      _PAGE_COHERENT | _PAGE_GUARDED));
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index d692ae31cfc7..3967e3cce03e 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -625,7 +625,7 @@ void pmdp_splitting_flush(struct vm_area_struct *vma,
 	"1:	ldarx	%0,0,%3\n\
 		andi.	%1,%0,%6\n\
 		bne-	1b \n\
-		ori	%1,%0,%4 \n\
+		oris	%1,%0,%4@h \n\
 		stdcx.	%1,0,%3 \n\
 		bne-	1b"
 	: "=&r" (old), "=&r" (tmp), "=m" (*pmdp)
-- 
2.5.0

  parent reply	other threads:[~2015-09-21  6:42 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-21  6:40 [PATCH 00/31] powerpc/mm: Update page table format for book3s 64 Aneesh Kumar K.V
2015-09-21  6:40 ` [PATCH 01/31] powerpc/mm: move pte headers to book3s directory Aneesh Kumar K.V
2015-09-21  6:40 ` [PATCH 02/31] powerpc/mm: move pte headers to book3s directory (part 2) Aneesh Kumar K.V
2015-09-21  6:40 ` [PATCH 03/31] powerpc/mm: make a separate copy for book3s Aneesh Kumar K.V
2015-09-21 21:58   ` Scott Wood
2015-09-22  6:42     ` Aneesh Kumar K.V
2015-09-21  6:40 ` [PATCH 04/31] powerpc/mm: make a separate copy for book3s (part 2) Aneesh Kumar K.V
2015-09-21  6:40 ` [PATCH 05/31] powerpc/mm: Move hash specific pte width and other defines to book3s Aneesh Kumar K.V
2015-09-21  6:40 ` [PATCH 06/31] powerpc/mm: Delete booke bits from book3s Aneesh Kumar K.V
2015-09-21  6:40 ` [PATCH 07/31] powerpc/mm: Don't have generic headers introduce functions touching pte bits Aneesh Kumar K.V
2015-09-21  6:40 ` [PATCH 08/31] powerpc/mm: Drop pte-common.h from BOOK3S 64 Aneesh Kumar K.V
2015-09-21  6:40 ` [PATCH 09/31] powerpc/mm: Don't use pte_val as lvalue Aneesh Kumar K.V
2015-09-22  2:22   ` Scott Wood
2015-09-22  6:44     ` Aneesh Kumar K.V
2015-09-22  6:46       ` Scott Wood
2015-09-21  6:40 ` [PATCH 10/31] powerpc/mm: Don't use pmd_val, pud_val and pgd_val " Aneesh Kumar K.V
2015-09-22  2:23   ` Scott Wood
2015-09-22  6:45     ` Aneesh Kumar K.V
2015-09-21  6:40 ` [PATCH 11/31] powerpc/mm: Move hash64 PTE bits from book3s/64/pgtable.h to hash.h Aneesh Kumar K.V
2015-09-21  6:40 ` [PATCH 12/31] powerpc/mm: Move PTE bits from generic functions to hash64 functions Aneesh Kumar K.V
2015-09-21  6:40 ` [PATCH 13/31] powerpc/booke: Move booke headers (part 1) Aneesh Kumar K.V
2015-09-21  6:40 ` [PATCH 14/31] powerpc/booke: Move booke headers (part 2) Aneesh Kumar K.V
2015-09-21  6:40 ` [PATCH 15/31] powerpc/booke: Move booke headers (part 3) Aneesh Kumar K.V
2015-09-21  6:40 ` [PATCH 16/31] powerpc/booke: Move booke headers (part 4) Aneesh Kumar K.V
2015-09-21  6:40 ` [PATCH 17/31] powerpc/booke: Move booke headers (part 5) Aneesh Kumar K.V
2015-09-21  6:40 ` [PATCH 18/31] powerpc/mm: Increase the pte frag size Aneesh Kumar K.V
2015-09-21  8:14   ` Benjamin Herrenschmidt
2015-09-21  8:45     ` Aneesh Kumar K.V
2015-09-21 11:06       ` Benjamin Herrenschmidt
2015-09-21 11:53         ` Aneesh Kumar K.V
2015-09-23 21:37           ` Benjamin Herrenschmidt
2015-09-28  4:55             ` Aneesh Kumar K.V
2015-09-21  6:40 ` [PATCH 19/31] powerpc/mm: Convert 4k hash insert to C Aneesh Kumar K.V
2015-09-21  8:16   ` Benjamin Herrenschmidt
2015-09-21  8:57     ` Aneesh Kumar K.V
2015-09-29  8:13     ` Aneesh Kumar K.V
2015-09-21  6:40 ` [PATCH 20/31] powerpc/mm: update __real_pte to take address as argument Aneesh Kumar K.V
2015-09-21  6:40 ` [PATCH 21/31] powerpc/mm: make pte page hash index slot 8 bits Aneesh Kumar K.V
2015-09-21  6:40 ` Aneesh Kumar K.V [this message]
2015-09-21  6:40 ` [PATCH 23/31] powerpc/mm: Increase the width of #define Aneesh Kumar K.V
2015-09-21  6:40 ` [PATCH 24/31] powerpc/mm: Convert __hash_page_64K to C Aneesh Kumar K.V
2015-09-23 13:56   ` Anshuman Khandual
2015-09-28  4:58     ` Aneesh Kumar K.V
2015-09-21  6:40 ` [PATCH 25/31] powerpc/mm: Convert 4k insert from asm " Aneesh Kumar K.V
2015-09-21  6:40 ` [PATCH 26/31] powerpc/mm: Remove the dependency on pte bit position in asm code Aneesh Kumar K.V
2015-09-21  6:40 ` [PATCH 27/31] powerpc/mm: Add helper for converting pte bit to hpte bits Aneesh Kumar K.V
2015-09-21  6:40 ` [PATCH 28/31] powerpc/mm: Move WIMG update to helper Aneesh Kumar K.V
2015-09-21  6:40 ` [PATCH 29/31] powerpc/mm: Move hugetlb related headers Aneesh Kumar K.V
2015-09-21  6:40 ` [PATCH 30/31] powerpc/mm: Move THP headers around Aneesh Kumar K.V
2015-09-21  6:40 ` [PATCH 31/31] powerpc/mm: Add a _PAGE_PTE bit Aneesh Kumar K.V
2015-09-21 21:48 ` [PATCH 00/31] powerpc/mm: Update page table format for book3s 64 Scott Wood
2015-09-22  6:48   ` Aneesh Kumar K.V
2015-09-22  6:57     ` Scott Wood
2015-09-28  4:56       ` Aneesh Kumar K.V
2015-09-28 16:41         ` Scott Wood
2015-09-30  1:44           ` Michael Ellerman
2015-09-29  0:12         ` Benjamin Herrenschmidt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1442817658-2588-23-git-send-email-aneesh.kumar@linux.vnet.ibm.com \
    --to=aneesh.kumar@linux.vnet.ibm.com \
    --cc=benh@kernel.crashing.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpe@ellerman.id.au \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.