[meta-fsl-arm PATCH] linux-fslc-mx6: Update revision to e975cda2 revision

[meta-fsl-arm PATCH] linux-fslc-mx6: Update revision to e975cda2 revision

[Otavio Salvador]

The e975cda2 revision includes the 3.14.54 stable release fixes plus
following changes contributed by Gateworks:

7292dc7 ASoC: add tda1997x codec support
aa4ee3d ipu3: keep buffer offset aligned
05608b5 ipu3: fix stripe calculation
30c6d90 thermal: imx: allow crit_delta to be passed in via kernel param
334fc35 arm: dts: add handles to anatop regulators
c7a4d85 fec: Russell Kings corruption fix
0c2c11f net: fec: fix the warning found by dma debug
b5b53b5 pci: imx6: Add delay after LTSSM transition
6dba6b0 fec_main: add mb() before setting status
05ab2a6 net: fec: fix NULL pointer dereference in fec_enet_timeout_work
07465db drivers: video: mxc: Add support for interlace on hdmi out
3eca3ca imx: thermal: use CPU temperature grade info for thresholds
172ad49 media: pci: tw6869: Implement ENUM_FRAMESIZES ioctl
a7d429e media: pci: tw6869: add device registered dev info
957f3fa media: pci: tw6869: initial add
cb61124 ARM: dts: imx: fix invalid #address-cells value
ea53bf7f imx:busfreq: disable busfreq driver by default
e3e114d video: mxc: ldb: use native mode for display timings
fa6b13a net: igb: register mii_bus for SerDes w/ external phy
09359b6 net: igb: add phy read/write functions that accept phy addr
d6daeac net: igb: add i210/i211 support for phy read/write
00b2ceb video: mxc: add adv739x TV encoder
3117a93 mxc_capture: add tda1997x HDMI receiver video support
9348099 imx: add imx tda1997x i2s DAI support
b81d263 mfd: add tda1997x HDMI receiver support
dba225f mxc_capture: check for init_camera_struct failure
09f7c1f mxc_capture: add device registration info
1db12fc mxc_hdmi: present sysfs edid as binary data instead of ascii
bd0601d mxc_hdmi: enable overflow interrupt after initialization complete
d6cc9e6 mxc_ipuv3: show device name for overlay fb
a7f44be mxc_ipuv3: show ipu_id/disp_id of registered device
e9ea090 regulator: Add LTC3676 support
3e12a168 regulator: core: Fix the init of DT defined fixed regulators
154b8be hwmon: mma8451: add fxos8700 magnetometer support
e19d671 hwmon: mma8451: add fxos8700 accel support
760c31c cpufreq: imx: add a 25mV tollerance to the operating point voltages
ef2eda1 cpufreq: imx: show soc voltage when debugging
b205762d cpufreq: imx: init mutex before it can be used
04bc9ed input: edt-ft5x06 - add device-tree config for screen res and inversion
1ca89b6 Input: edt-ft5x06 - fix an i2c write for M09 support
dc5f6c9 Input: edt-ft5x06 - add a missing condition
f2854dd Input: edt-ft5x06 - add support for M09 firmware version
390394c Input: edt-ft5x06 - ignore touchdown events
6b60fb3 Input: edt-ft5x06 - adjust delays to conform datasheet
74bceb0 Input: edt-ft5x06 - add DT support
481da81 input: goodix: add invert and rotate support via device-tree
6297f18 input: goodix: add support for performing init sqequence
4746ef3 input: goodix: add device-tree support

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---

 recipes-kernel/linux/linux-fslc-mx6_3.14-1.0.x.bb | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/recipes-kernel/linux/linux-fslc-mx6_3.14-1.0.x.bb b/recipes-kernel/linux/linux-fslc-mx6_3.14-1.0.x.bb
index 6cbe9d3..9ad5acf 100644
--- a/recipes-kernel/linux/linux-fslc-mx6_3.14-1.0.x.bb
+++ b/recipes-kernel/linux/linux-fslc-mx6_3.14-1.0.x.bb
@@ -11,6 +11,6 @@ include linux-fslc.inc
 PV .= "+git${SRCPV}"
 
 SRCBRANCH = "3.14-1.0.x-mx6"
-SRCREV = "4bae14aef7b8f340f30598d2b076e9ed7b7cba56"
+SRCREV = "e975cda22c530a5f2bf79326167ea99fff7509bb"
 
 COMPATIBLE_MACHINE = "(mx6)"
-- 
2.6.1