[PATCH 0/1] ARM: meson: Add status LED for Odroid-C1

[PATCH 0/1] ARM: meson: Add status LED for Odroid-C1

[Edward Cragg]

Add status LED for Hardkernel Odroid-C1 development board

Edward Cragg (1):
  ARM: meson: Add status LED for Odroid-C1

 arch/arm/boot/dts/meson8b-odroidc1.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

-- 
2.5.0

[PATCH 0/1] ARM: meson: Add status LED for Odroid-C1

[Edward Cragg]

Add status LED for Hardkernel Odroid-C1 development board

Edward Cragg (1):
  ARM: meson: Add status LED for Odroid-C1

 arch/arm/boot/dts/meson8b-odroidc1.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 0/1] ARM: meson: Add status LED for Odroid-C1

[Edward Cragg]

Add status LED for Hardkernel Odroid-C1 development board

Edward Cragg (1):
  ARM: meson: Add status LED for Odroid-C1

 arch/arm/boot/dts/meson8b-odroidc1.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

-- 
2.5.0

[PATCH 1/1] ARM: meson: Add status LED for Odroid-C1

[Edward Cragg]

Add the blue status LED to the Hardkernel Odroid C1 board DTS.
This is the only programmable LED on the board.

Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
---
 arch/arm/boot/dts/meson8b-odroidc1.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index a8e2911..3b03523 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -1,6 +1,8 @@
 /*
  * Copyright 2015 Endless Mobile, Inc.
  * Author: Carlo Caione <carlo@endlessm.com>
+ * Copyright 2015 Codethink Ltd.
+ * Author: Edward Cragg <edward.cragg@codethink.co.uk>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -46,6 +48,7 @@
 
 /dts-v1/;
 #include "meson8b.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Hardkernel ODROID-C1";
@@ -58,6 +61,16 @@
 	memory {
 		reg = <0x40000000 0x40000000>;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		blue {
+			label = "c1:blue:alive";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
 };
 
 &uart_AO {
-- 
2.5.0

[PATCH 1/1] ARM: meson: Add status LED for Odroid-C1

[Edward Cragg]

Add the blue status LED to the Hardkernel Odroid C1 board DTS.
This is the only programmable LED on the board.

Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
---
 arch/arm/boot/dts/meson8b-odroidc1.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index a8e2911..3b03523 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -1,6 +1,8 @@
 /*
  * Copyright 2015 Endless Mobile, Inc.
  * Author: Carlo Caione <carlo@endlessm.com>
+ * Copyright 2015 Codethink Ltd.
+ * Author: Edward Cragg <edward.cragg@codethink.co.uk>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -46,6 +48,7 @@
 
 /dts-v1/;
 #include "meson8b.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Hardkernel ODROID-C1";
@@ -58,6 +61,16 @@
 	memory {
 		reg = <0x40000000 0x40000000>;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		blue {
+			label = "c1:blue:alive";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
 };
 
 &uart_AO {
-- 
2.5.0

Re: [PATCH 1/1] ARM: meson: Add status LED for Odroid-C1

[Carlo Caione]

On Fri, Oct 9, 2015 at 4:37 PM, Edward Cragg
<edward.cragg@codethink.co.uk> wrote:
> Add the blue status LED to the Hardkernel Odroid C1 board DTS.
> This is the only programmable LED on the board.
>
> Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
> ---
>  arch/arm/boot/dts/meson8b-odroidc1.dts | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
> index a8e2911..3b03523 100644
> --- a/arch/arm/boot/dts/meson8b-odroidc1.dts
> +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
> @@ -1,6 +1,8 @@
>  /*
>   * Copyright 2015 Endless Mobile, Inc.
>   * Author: Carlo Caione <carlo@endlessm.com>
> + * Copyright 2015 Codethink Ltd.
> + * Author: Edward Cragg <edward.cragg@codethink.co.uk>

Usually we do not add a copyright line for each small addition to the DTS.

>   *
>   * This file is dual-licensed: you can use it either under the terms
>   * of the GPL or the X11 license, at your option. Note that this dual
> @@ -46,6 +48,7 @@
>
>  /dts-v1/;
>  #include "meson8b.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
>
>  / {
>         model = "Hardkernel ODROID-C1";
> @@ -58,6 +61,16 @@
>         memory {
>                 reg = <0x40000000 0x40000000>;
>         };
> +
> +       leds {
> +               compatible = "gpio-leds";
> +               blue {
> +                       label = "c1:blue:alive";
> +                       gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
> +                       linux,default-trigger = "heartbeat";
> +                       default-state = "off";
> +               };
> +       };
>  };

otherwise Acked-by: Carlo Caione <carlo@endlessm.com>

-- 
Carlo Caione

Re: [PATCH 1/1] ARM: meson: Add status LED for Odroid-C1

[Carlo Caione]

On Fri, Oct 9, 2015 at 4:37 PM, Edward Cragg
<edward.cragg-4yDnlxn2s6sWdaTGBSpHTA@public.gmane.org> wrote:
> Add the blue status LED to the Hardkernel Odroid C1 board DTS.
> This is the only programmable LED on the board.
>
> Signed-off-by: Edward Cragg <edward.cragg-4yDnlxn2s6sWdaTGBSpHTA@public.gmane.org>
> ---
>  arch/arm/boot/dts/meson8b-odroidc1.dts | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
> index a8e2911..3b03523 100644
> --- a/arch/arm/boot/dts/meson8b-odroidc1.dts
> +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
> @@ -1,6 +1,8 @@
>  /*
>   * Copyright 2015 Endless Mobile, Inc.
>   * Author: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org>
> + * Copyright 2015 Codethink Ltd.
> + * Author: Edward Cragg <edward.cragg-4yDnlxn2s6sWdaTGBSpHTA@public.gmane.org>

Usually we do not add a copyright line for each small addition to the DTS.

>   *
>   * This file is dual-licensed: you can use it either under the terms
>   * of the GPL or the X11 license, at your option. Note that this dual
> @@ -46,6 +48,7 @@
>
>  /dts-v1/;
>  #include "meson8b.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
>
>  / {
>         model = "Hardkernel ODROID-C1";
> @@ -58,6 +61,16 @@
>         memory {
>                 reg = <0x40000000 0x40000000>;
>         };
> +
> +       leds {
> +               compatible = "gpio-leds";
> +               blue {
> +                       label = "c1:blue:alive";
> +                       gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
> +                       linux,default-trigger = "heartbeat";
> +                       default-state = "off";
> +               };
> +       };
>  };

otherwise Acked-by: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org>

-- 
Carlo Caione
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 1/1] ARM: meson: Add status LED for Odroid-C1

[Carlo Caione]

On Fri, Oct 9, 2015 at 4:37 PM, Edward Cragg
<edward.cragg@codethink.co.uk> wrote:
> Add the blue status LED to the Hardkernel Odroid C1 board DTS.
> This is the only programmable LED on the board.
>
> Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
> ---
>  arch/arm/boot/dts/meson8b-odroidc1.dts | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
> index a8e2911..3b03523 100644
> --- a/arch/arm/boot/dts/meson8b-odroidc1.dts
> +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
> @@ -1,6 +1,8 @@
>  /*
>   * Copyright 2015 Endless Mobile, Inc.
>   * Author: Carlo Caione <carlo@endlessm.com>
> + * Copyright 2015 Codethink Ltd.
> + * Author: Edward Cragg <edward.cragg@codethink.co.uk>

Usually we do not add a copyright line for each small addition to the DTS.

>   *
>   * This file is dual-licensed: you can use it either under the terms
>   * of the GPL or the X11 license, at your option. Note that this dual
> @@ -46,6 +48,7 @@
>
>  /dts-v1/;
>  #include "meson8b.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
>
>  / {
>         model = "Hardkernel ODROID-C1";
> @@ -58,6 +61,16 @@
>         memory {
>                 reg = <0x40000000 0x40000000>;
>         };
> +
> +       leds {
> +               compatible = "gpio-leds";
> +               blue {
> +                       label = "c1:blue:alive";
> +                       gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
> +                       linux,default-trigger = "heartbeat";
> +                       default-state = "off";
> +               };
> +       };
>  };

otherwise Acked-by: Carlo Caione <carlo@endlessm.com>

-- 
Carlo Caione

Re: [PATCH 1/1] ARM: meson: Add status LED for Odroid-C1

[Edward Cragg]

On Fri, Oct 09, 2015 at 03:37:10PM +0100, Edward Cragg wrote:
> Add the blue status LED to the Hardkernel Odroid C1 board DTS.
> This is the only programmable LED on the board.
> 
> Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
> ---
>  arch/arm/boot/dts/meson8b-odroidc1.dts | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 

Hi, has anyone had a chance to have a look at this yet?

I originally forgot to add that this patch is dependent on:

[PATCH v2 0/4] Add support for Amlogic Meson8b and couple of boards

which has already been accepted.

Ed

Re: [PATCH 1/1] ARM: meson: Add status LED for Odroid-C1

[Edward Cragg]

On Fri, Oct 09, 2015 at 03:37:10PM +0100, Edward Cragg wrote:
> Add the blue status LED to the Hardkernel Odroid C1 board DTS.
> This is the only programmable LED on the board.
> 
> Signed-off-by: Edward Cragg <edward.cragg-4yDnlxn2s6sWdaTGBSpHTA@public.gmane.org>
> ---
>  arch/arm/boot/dts/meson8b-odroidc1.dts | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 

Hi, has anyone had a chance to have a look at this yet?

I originally forgot to add that this patch is dependent on:

[PATCH v2 0/4] Add support for Amlogic Meson8b and couple of boards

which has already been accepted.

Ed
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 1/1] ARM: meson: Add status LED for Odroid-C1

[Edward Cragg]

On Fri, Oct 09, 2015 at 03:37:10PM +0100, Edward Cragg wrote:
> Add the blue status LED to the Hardkernel Odroid C1 board DTS.
> This is the only programmable LED on the board.
> 
> Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
> ---
>  arch/arm/boot/dts/meson8b-odroidc1.dts | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 

Hi, has anyone had a chance to have a look at this yet?

I originally forgot to add that this patch is dependent on:

[PATCH v2 0/4] Add support for Amlogic Meson8b and couple of boards

which has already been accepted.

Ed

Re: [PATCH 1/1] ARM: meson: Add status LED for Odroid-C1

[Carlo Caione]

On Fri, Oct 30, 2015 at 6:55 PM, Edward Cragg
<edward.cragg@codethink.co.uk> wrote:
> On Fri, Oct 09, 2015 at 03:37:10PM +0100, Edward Cragg wrote:
>> Add the blue status LED to the Hardkernel Odroid C1 board DTS.
>> This is the only programmable LED on the board.
>>
>> Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
>> ---
>>  arch/arm/boot/dts/meson8b-odroidc1.dts | 13 +++++++++++++
>>  1 file changed, 13 insertions(+)
>>
>
> Hi, has anyone had a chance to have a look at this yet?

Yes, I already replied to you on Oct 12.
I was waiting for a resubmission without the added copyright but I'll
modify it myself and I'll push a PR.

Cheers,

-- 
Carlo Caione

Re: [PATCH 1/1] ARM: meson: Add status LED for Odroid-C1

[Carlo Caione]

On Fri, Oct 30, 2015 at 6:55 PM, Edward Cragg
<edward.cragg@codethink.co.uk> wrote:
> On Fri, Oct 09, 2015 at 03:37:10PM +0100, Edward Cragg wrote:
>> Add the blue status LED to the Hardkernel Odroid C1 board DTS.
>> This is the only programmable LED on the board.
>>
>> Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
>> ---
>>  arch/arm/boot/dts/meson8b-odroidc1.dts | 13 +++++++++++++
>>  1 file changed, 13 insertions(+)
>>
>
> Hi, has anyone had a chance to have a look at this yet?

Yes, I already replied to you on Oct 12.
I was waiting for a resubmission without the added copyright but I'll
modify it myself and I'll push a PR.

Cheers,

-- 
Carlo Caione

[PATCH 1/1] ARM: meson: Add status LED for Odroid-C1

[Carlo Caione]

On Fri, Oct 30, 2015 at 6:55 PM, Edward Cragg
<edward.cragg@codethink.co.uk> wrote:
> On Fri, Oct 09, 2015 at 03:37:10PM +0100, Edward Cragg wrote:
>> Add the blue status LED to the Hardkernel Odroid C1 board DTS.
>> This is the only programmable LED on the board.
>>
>> Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
>> ---
>>  arch/arm/boot/dts/meson8b-odroidc1.dts | 13 +++++++++++++
>>  1 file changed, 13 insertions(+)
>>
>
> Hi, has anyone had a chance to have a look at this yet?

Yes, I already replied to you on Oct 12.
I was waiting for a resubmission without the added copyright but I'll
modify it myself and I'll push a PR.

Cheers,

-- 
Carlo Caione