All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v2 0/4] arm64: Hi6220: enable CPU idle states
@ 2015-10-13  0:58 ` Leo Yan
  0 siblings, 0 replies; 14+ messages in thread
From: Leo Yan @ 2015-10-13  0:58 UTC (permalink / raw)
  To: Catalin Marinas, Will Deacon, Rob Herring, Pawel Moll,
	Mark Rutland, Ian Campbell, Kumar Gala, Leo Yan, Haojian Zhuang,
	Wei Xu, Bintian Wang, Yiping Xu, Sudeep Holla, linux-arm-kernel,
	linux-kernel, devicetree

This patch series is to enable CPU idle states for Hi6220.

Hi6220 uses PSCIv0.2 compliance interface, so directly use ARM's generic
CPUIdle driver. Patch 1 is to reserve memory regions so make sure MCU can
work well to handle power controlling; Patch 2/3 enable sp804 timer as
broadcast timer during idle states; Patch 4 registers CPU power down state
and cluster power down state.

Changes from v1:
* According to Sudeep's review, fix binding for idle-states
* According to Rob's review, due timers share same clock source with apb
  clock, so just only pass one clock phandle


Leo Yan (4):
  arm64: dts: Reserve memory regions for hi6220
  arm64: Kconfig: select sp804 timer for ARCH_HISI
  arm64: dts: add sp804 timer node for Hi6220
  arm64: dts: enable idle states for Hi6220

 arch/arm64/Kconfig.platforms                   |  1 +
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 16 ++++++++---
 arch/arm64/boot/dts/hisilicon/hi6220.dtsi      | 40 ++++++++++++++++++++++++++
 3 files changed, 53 insertions(+), 4 deletions(-)

-- 
1.9.1


^ permalink raw reply	[flat|nested] 14+ messages in thread
* [PATCH v2 0/4] arm64: Hi6220: enable CPU idle states
@ 2015-10-13  0:58 ` Leo Yan
  0 siblings, 0 replies; 14+ messages in thread
From: Leo Yan @ 2015-10-13  0:58 UTC (permalink / raw)
  To: Catalin Marinas, Will Deacon, Rob Herring, Pawel Moll,
	Mark Rutland, Ian Campbell, Kumar Gala, Leo Yan, Haojian Zhuang,
	Wei Xu, Bintian Wang, Yiping Xu, Sudeep Holla,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	devicetree-u79uwXL29TY76Z2rM5mHXA

This patch series is to enable CPU idle states for Hi6220.

Hi6220 uses PSCIv0.2 compliance interface, so directly use ARM's generic
CPUIdle driver. Patch 1 is to reserve memory regions so make sure MCU can
work well to handle power controlling; Patch 2/3 enable sp804 timer as
broadcast timer during idle states; Patch 4 registers CPU power down state
and cluster power down state.

Changes from v1:
* According to Sudeep's review, fix binding for idle-states
* According to Rob's review, due timers share same clock source with apb
  clock, so just only pass one clock phandle


Leo Yan (4):
  arm64: dts: Reserve memory regions for hi6220
  arm64: Kconfig: select sp804 timer for ARCH_HISI
  arm64: dts: add sp804 timer node for Hi6220
  arm64: dts: enable idle states for Hi6220

 arch/arm64/Kconfig.platforms                   |  1 +
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 16 ++++++++---
 arch/arm64/boot/dts/hisilicon/hi6220.dtsi      | 40 ++++++++++++++++++++++++++
 3 files changed, 53 insertions(+), 4 deletions(-)

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 14+ messages in thread
* [PATCH v2 0/4] arm64: Hi6220: enable CPU idle states
@ 2015-10-13  0:58 ` Leo Yan
  0 siblings, 0 replies; 14+ messages in thread
From: Leo Yan @ 2015-10-13  0:58 UTC (permalink / raw)
  To: linux-arm-kernel

This patch series is to enable CPU idle states for Hi6220.

Hi6220 uses PSCIv0.2 compliance interface, so directly use ARM's generic
CPUIdle driver. Patch 1 is to reserve memory regions so make sure MCU can
work well to handle power controlling; Patch 2/3 enable sp804 timer as
broadcast timer during idle states; Patch 4 registers CPU power down state
and cluster power down state.

Changes from v1:
* According to Sudeep's review, fix binding for idle-states
* According to Rob's review, due timers share same clock source with apb
  clock, so just only pass one clock phandle


Leo Yan (4):
  arm64: dts: Reserve memory regions for hi6220
  arm64: Kconfig: select sp804 timer for ARCH_HISI
  arm64: dts: add sp804 timer node for Hi6220
  arm64: dts: enable idle states for Hi6220

 arch/arm64/Kconfig.platforms                   |  1 +
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 16 ++++++++---
 arch/arm64/boot/dts/hisilicon/hi6220.dtsi      | 40 ++++++++++++++++++++++++++
 3 files changed, 53 insertions(+), 4 deletions(-)

-- 
1.9.1

^ permalink raw reply	[flat|nested] 14+ messages in thread
* [PATCH v2 1/4] arm64: dts: Reserve memory regions for hi6220
@ 2015-10-13  0:58   ` Leo Yan
  0 siblings, 0 replies; 14+ messages in thread
From: Leo Yan @ 2015-10-13  0:58 UTC (permalink / raw)
  To: Catalin Marinas, Will Deacon, Rob Herring, Pawel Moll,
	Mark Rutland, Ian Campbell, Kumar Gala, Leo Yan, Haojian Zhuang,
	Wei Xu, Bintian Wang, Yiping Xu, Sudeep Holla, linux-arm-kernel,
	linux-kernel, devicetree

On Hi6220, below memory regions in DDR have specific purpose:

  0x05e0,0000 - 0x05ef,ffff: For MCU firmware using at runtime;
  0x06df,f000 - 0x06df,ffff: For mailbox message data;
  0x0740,f000 - 0x0740,ffff: For MCU firmware's section;
  0x3e00,0000 - 0x3fff,ffff: For OP-TEE.

This patch reserves these memory regions in DT.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
---
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index e36a539..e3f4cb3 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -7,9 +7,6 @@
 
 /dts-v1/;
 
-/*Reserved 1MB memory for MCU*/
-/memreserve/ 0x05e00000 0x00100000;
-
 #include "hi6220.dtsi"
 
 / {
@@ -24,8 +21,19 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	/*
+	 * Reserve below regions from memory node:
+	 *
+	 *  - 0x05e0,0000 - 0x05ef,ffff: MCU firmware runtime using
+	 *  - 0x06df,f000 - 0x06df,ffff: Mailbox message data
+	 *  - 0x0740,f000 - 0x0740,ffff: MCU firmware section
+	 *  - 0x3e00,0000 - 0x3fff,ffff: OP-TEE
+	 */
 	memory@0 {
 		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x40000000>;
+		reg = <0x00000000 0x00000000 0x00000000 0x05e00000>,
+		      <0x00000000 0x05f00000 0x00000000 0x00eff000>,
+		      <0x00000000 0x06e00000 0x00000000 0x0060f000>,
+		      <0x00000000 0x07410000 0x00000000 0x36bf0000>;
 	};
 };
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 14+ messages in thread
* [PATCH v2 1/4] arm64: dts: Reserve memory regions for hi6220
@ 2015-10-13  0:58   ` Leo Yan
  0 siblings, 0 replies; 14+ messages in thread
From: Leo Yan @ 2015-10-13  0:58 UTC (permalink / raw)
  To: Catalin Marinas, Will Deacon, Rob Herring, Pawel Moll,
	Mark Rutland, Ian Campbell, Kumar Gala, Leo Yan, Haojian Zhuang,
	Wei Xu, Bintian Wang, Yiping Xu, Sudeep Holla,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	devicetree-u79uwXL29TY76Z2rM5mHXA

On Hi6220, below memory regions in DDR have specific purpose:

  0x05e0,0000 - 0x05ef,ffff: For MCU firmware using at runtime;
  0x06df,f000 - 0x06df,ffff: For mailbox message data;
  0x0740,f000 - 0x0740,ffff: For MCU firmware's section;
  0x3e00,0000 - 0x3fff,ffff: For OP-TEE.

This patch reserves these memory regions in DT.

Signed-off-by: Leo Yan <leo.yan-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index e36a539..e3f4cb3 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -7,9 +7,6 @@
 
 /dts-v1/;
 
-/*Reserved 1MB memory for MCU*/
-/memreserve/ 0x05e00000 0x00100000;
-
 #include "hi6220.dtsi"
 
 / {
@@ -24,8 +21,19 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	/*
+	 * Reserve below regions from memory node:
+	 *
+	 *  - 0x05e0,0000 - 0x05ef,ffff: MCU firmware runtime using
+	 *  - 0x06df,f000 - 0x06df,ffff: Mailbox message data
+	 *  - 0x0740,f000 - 0x0740,ffff: MCU firmware section
+	 *  - 0x3e00,0000 - 0x3fff,ffff: OP-TEE
+	 */
 	memory@0 {
 		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x40000000>;
+		reg = <0x00000000 0x00000000 0x00000000 0x05e00000>,
+		      <0x00000000 0x05f00000 0x00000000 0x00eff000>,
+		      <0x00000000 0x06e00000 0x00000000 0x0060f000>,
+		      <0x00000000 0x07410000 0x00000000 0x36bf0000>;
 	};
 };
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 14+ messages in thread
* [PATCH v2 1/4] arm64: dts: Reserve memory regions for hi6220
@ 2015-10-13  0:58   ` Leo Yan
  0 siblings, 0 replies; 14+ messages in thread
From: Leo Yan @ 2015-10-13  0:58 UTC (permalink / raw)
  To: linux-arm-kernel

On Hi6220, below memory regions in DDR have specific purpose:

  0x05e0,0000 - 0x05ef,ffff: For MCU firmware using at runtime;
  0x06df,f000 - 0x06df,ffff: For mailbox message data;
  0x0740,f000 - 0x0740,ffff: For MCU firmware's section;
  0x3e00,0000 - 0x3fff,ffff: For OP-TEE.

This patch reserves these memory regions in DT.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
---
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index e36a539..e3f4cb3 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -7,9 +7,6 @@
 
 /dts-v1/;
 
-/*Reserved 1MB memory for MCU*/
-/memreserve/ 0x05e00000 0x00100000;
-
 #include "hi6220.dtsi"
 
 / {
@@ -24,8 +21,19 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	/*
+	 * Reserve below regions from memory node:
+	 *
+	 *  - 0x05e0,0000 - 0x05ef,ffff: MCU firmware runtime using
+	 *  - 0x06df,f000 - 0x06df,ffff: Mailbox message data
+	 *  - 0x0740,f000 - 0x0740,ffff: MCU firmware section
+	 *  - 0x3e00,0000 - 0x3fff,ffff: OP-TEE
+	 */
 	memory at 0 {
 		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x40000000>;
+		reg = <0x00000000 0x00000000 0x00000000 0x05e00000>,
+		      <0x00000000 0x05f00000 0x00000000 0x00eff000>,
+		      <0x00000000 0x06e00000 0x00000000 0x0060f000>,
+		      <0x00000000 0x07410000 0x00000000 0x36bf0000>;
 	};
 };
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 14+ messages in thread
* [PATCH v2 2/4] arm64: Kconfig: select sp804 timer for ARCH_HISI
  2015-10-13  0:58 ` Leo Yan
@ 2015-10-13  0:58   ` Leo Yan
  -1 siblings, 0 replies; 14+ messages in thread
From: Leo Yan @ 2015-10-13  0:58 UTC (permalink / raw)
  To: Catalin Marinas, Will Deacon, Rob Herring, Pawel Moll,
	Mark Rutland, Ian Campbell, Kumar Gala, Leo Yan, Haojian Zhuang,
	Wei Xu, Bintian Wang, Yiping Xu, Sudeep Holla, linux-arm-kernel,
	linux-kernel, devicetree

Select sp804 timer for ARCH_HISI, which is used as broadcast timer.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
---
 arch/arm64/Kconfig.platforms | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 23800a1..6d730fb 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -35,6 +35,7 @@ config ARCH_FSL_LS2085A
 
 config ARCH_HISI
 	bool "Hisilicon SoC Family"
+	select ARM_TIMER_SP804
 	help
 	  This enables support for Hisilicon ARMv8 SoC family
 
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 14+ messages in thread
* [PATCH v2 2/4] arm64: Kconfig: select sp804 timer for ARCH_HISI
@ 2015-10-13  0:58   ` Leo Yan
  0 siblings, 0 replies; 14+ messages in thread
From: Leo Yan @ 2015-10-13  0:58 UTC (permalink / raw)
  To: linux-arm-kernel

Select sp804 timer for ARCH_HISI, which is used as broadcast timer.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
---
 arch/arm64/Kconfig.platforms | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 23800a1..6d730fb 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -35,6 +35,7 @@ config ARCH_FSL_LS2085A
 
 config ARCH_HISI
 	bool "Hisilicon SoC Family"
+	select ARM_TIMER_SP804
 	help
 	  This enables support for Hisilicon ARMv8 SoC family
 
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 14+ messages in thread
* [PATCH v2 3/4] arm64: dts: add sp804 timer node for Hi6220
  2015-10-13  0:58 ` Leo Yan
@ 2015-10-13  0:58   ` Leo Yan
  -1 siblings, 0 replies; 14+ messages in thread
From: Leo Yan @ 2015-10-13  0:58 UTC (permalink / raw)
  To: Catalin Marinas, Will Deacon, Rob Herring, Pawel Moll,
	Mark Rutland, Ian Campbell, Kumar Gala, Leo Yan, Haojian Zhuang,
	Wei Xu, Bintian Wang, Yiping Xu, Sudeep Holla, linux-arm-kernel,
	linux-kernel, devicetree

Add sp804 timer for hi6220, so it can be used as broadcast timer.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
---
 arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 3f03380..cdd4125 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -167,5 +167,14 @@
 			clocks = <&ao_ctrl 36>, <&ao_ctrl 36>;
 			clock-names = "uartclk", "apb_pclk";
 		};
+
+		dual_timer0: dual_timer@f8008000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x0 0xf8008000 0x0 0x1000>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ao_ctrl 27>;
+			clock-names = "apb_pclk";
+		};
 	};
 };
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 14+ messages in thread
* [PATCH v2 3/4] arm64: dts: add sp804 timer node for Hi6220
@ 2015-10-13  0:58   ` Leo Yan
  0 siblings, 0 replies; 14+ messages in thread
From: Leo Yan @ 2015-10-13  0:58 UTC (permalink / raw)
  To: linux-arm-kernel

Add sp804 timer for hi6220, so it can be used as broadcast timer.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
---
 arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 3f03380..cdd4125 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -167,5 +167,14 @@
 			clocks = <&ao_ctrl 36>, <&ao_ctrl 36>;
 			clock-names = "uartclk", "apb_pclk";
 		};
+
+		dual_timer0: dual_timer at f8008000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x0 0xf8008000 0x0 0x1000>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ao_ctrl 27>;
+			clock-names = "apb_pclk";
+		};
 	};
 };
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 14+ messages in thread
* [PATCH v2 4/4] arm64: dts: enable idle states for Hi6220
  2015-10-13  0:58 ` Leo Yan
@ 2015-10-13  0:58   ` Leo Yan
  -1 siblings, 0 replies; 14+ messages in thread
From: Leo Yan @ 2015-10-13  0:58 UTC (permalink / raw)
  To: Catalin Marinas, Will Deacon, Rob Herring, Pawel Moll,
	Mark Rutland, Ian Campbell, Kumar Gala, Leo Yan, Haojian Zhuang,
	Wei Xu, Bintian Wang, Yiping Xu, Sudeep Holla, linux-arm-kernel,
	linux-kernel, devicetree

Add cpu and cluster level's low power state for Hi6220.

Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
---
 arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index cdd4125..2830571 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -52,11 +52,35 @@
 			};
 		};
 
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <700>;
+				exit-latency-us = <250>;
+				min-residency-us = <1000>;
+			};
+
+			CLUSTER_SLEEP: cluster-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x1010000>;
+				entry-latency-us = <1000>;
+				exit-latency-us = <700>;
+				min-residency-us = <2700>;
+				wakeup-latency-us = <1500>;
+			};
+		};
+
 		cpu0: cpu@0 {
 			compatible = "arm,cortex-a53", "arm,armv8";
 			device_type = "cpu";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
 		};
 
 		cpu1: cpu@1 {
@@ -64,6 +88,7 @@
 			device_type = "cpu";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
 		};
 
 		cpu2: cpu@2 {
@@ -71,6 +96,7 @@
 			device_type = "cpu";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
 		};
 
 		cpu3: cpu@3 {
@@ -78,6 +104,7 @@
 			device_type = "cpu";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
 		};
 
 		cpu4: cpu@100 {
@@ -85,6 +112,7 @@
 			device_type = "cpu";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
 		};
 
 		cpu5: cpu@101 {
@@ -92,6 +120,7 @@
 			device_type = "cpu";
 			reg = <0x0 0x101>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
 		};
 
 		cpu6: cpu@102 {
@@ -99,6 +128,7 @@
 			device_type = "cpu";
 			reg = <0x0 0x102>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
 		};
 
 		cpu7: cpu@103 {
@@ -106,6 +136,7 @@
 			device_type = "cpu";
 			reg = <0x0 0x103>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
 		};
 	};
 
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 14+ messages in thread
* [PATCH v2 4/4] arm64: dts: enable idle states for Hi6220
@ 2015-10-13  0:58   ` Leo Yan
  0 siblings, 0 replies; 14+ messages in thread
From: Leo Yan @ 2015-10-13  0:58 UTC (permalink / raw)
  To: linux-arm-kernel

Add cpu and cluster level's low power state for Hi6220.

Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
---
 arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index cdd4125..2830571 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -52,11 +52,35 @@
 			};
 		};
 
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <700>;
+				exit-latency-us = <250>;
+				min-residency-us = <1000>;
+			};
+
+			CLUSTER_SLEEP: cluster-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x1010000>;
+				entry-latency-us = <1000>;
+				exit-latency-us = <700>;
+				min-residency-us = <2700>;
+				wakeup-latency-us = <1500>;
+			};
+		};
+
 		cpu0: cpu at 0 {
 			compatible = "arm,cortex-a53", "arm,armv8";
 			device_type = "cpu";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
 		};
 
 		cpu1: cpu at 1 {
@@ -64,6 +88,7 @@
 			device_type = "cpu";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
 		};
 
 		cpu2: cpu at 2 {
@@ -71,6 +96,7 @@
 			device_type = "cpu";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
 		};
 
 		cpu3: cpu at 3 {
@@ -78,6 +104,7 @@
 			device_type = "cpu";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
 		};
 
 		cpu4: cpu at 100 {
@@ -85,6 +112,7 @@
 			device_type = "cpu";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
 		};
 
 		cpu5: cpu at 101 {
@@ -92,6 +120,7 @@
 			device_type = "cpu";
 			reg = <0x0 0x101>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
 		};
 
 		cpu6: cpu at 102 {
@@ -99,6 +128,7 @@
 			device_type = "cpu";
 			reg = <0x0 0x102>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
 		};
 
 		cpu7: cpu at 103 {
@@ -106,6 +136,7 @@
 			device_type = "cpu";
 			reg = <0x0 0x103>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
 		};
 	};
 
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 14+ messages in thread
* Re: [PATCH v2 1/4] arm64: dts: Reserve memory regions for hi6220
  2015-10-13  0:58   ` Leo Yan
@ 2015-10-16  7:30     ` Leo Yan
  -1 siblings, 0 replies; 14+ messages in thread
From: Leo Yan @ 2015-10-16  7:30 UTC (permalink / raw)
  To: Catalin Marinas, Will Deacon, Rob Herring, Pawel Moll,
	Mark Rutland, Ian Campbell, Kumar Gala, Haojian Zhuang, Wei Xu,
	Bintian Wang, Yiping Xu, Sudeep Holla, linux-arm-kernel,
	linux-kernel, devicetree

Hi Rob,

On Tue, Oct 13, 2015 at 08:58:13AM +0800, Leo Yan wrote:
> On Hi6220, below memory regions in DDR have specific purpose:
> 
>   0x05e0,0000 - 0x05ef,ffff: For MCU firmware using at runtime;
>   0x06df,f000 - 0x06df,ffff: For mailbox message data;
>   0x0740,f000 - 0x0740,ffff: For MCU firmware's section;
>   0x3e00,0000 - 0x3fff,ffff: For OP-TEE.
> 
> This patch reserves these memory regions in DT.
> 
> Signed-off-by: Leo Yan <leo.yan@linaro.org>
> ---
>  arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 16 ++++++++++++----
>  1 file changed, 12 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> index e36a539..e3f4cb3 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> @@ -7,9 +7,6 @@
>  
>  /dts-v1/;
>  
> -/*Reserved 1MB memory for MCU*/
> -/memreserve/ 0x05e00000 0x00100000;
> -
>  #include "hi6220.dtsi"
>  
>  / {
> @@ -24,8 +21,19 @@
>  		stdout-path = "serial0:115200n8";
>  	};
>  
> +	/*
> +	 * Reserve below regions from memory node:
> +	 *
> +	 *  - 0x05e0,0000 - 0x05ef,ffff: MCU firmware runtime using
> +	 *  - 0x06df,f000 - 0x06df,ffff: Mailbox message data
> +	 *  - 0x0740,f000 - 0x0740,ffff: MCU firmware section
> +	 *  - 0x3e00,0000 - 0x3fff,ffff: OP-TEE
> +	 */
>  	memory@0 {
>  		device_type = "memory";
> -		reg = <0x0 0x0 0x0 0x40000000>;
> +		reg = <0x00000000 0x00000000 0x00000000 0x05e00000>,
> +		      <0x00000000 0x05f00000 0x00000000 0x00eff000>,
> +		      <0x00000000 0x06e00000 0x00000000 0x0060f000>,
> +		      <0x00000000 0x07410000 0x00000000 0x36bf0000>;
>  	};
>  };

Are you convinced by the before's patch arguments from Mark and I? i'd
like get green light from you.

Thanks,
Leo Yan

> -- 
> 1.9.1
> 

^ permalink raw reply	[flat|nested] 14+ messages in thread
* [PATCH v2 1/4] arm64: dts: Reserve memory regions for hi6220
@ 2015-10-16  7:30     ` Leo Yan
  0 siblings, 0 replies; 14+ messages in thread
From: Leo Yan @ 2015-10-16  7:30 UTC (permalink / raw)
  To: linux-arm-kernel

Hi Rob,

On Tue, Oct 13, 2015 at 08:58:13AM +0800, Leo Yan wrote:
> On Hi6220, below memory regions in DDR have specific purpose:
> 
>   0x05e0,0000 - 0x05ef,ffff: For MCU firmware using at runtime;
>   0x06df,f000 - 0x06df,ffff: For mailbox message data;
>   0x0740,f000 - 0x0740,ffff: For MCU firmware's section;
>   0x3e00,0000 - 0x3fff,ffff: For OP-TEE.
> 
> This patch reserves these memory regions in DT.
> 
> Signed-off-by: Leo Yan <leo.yan@linaro.org>
> ---
>  arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 16 ++++++++++++----
>  1 file changed, 12 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> index e36a539..e3f4cb3 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> @@ -7,9 +7,6 @@
>  
>  /dts-v1/;
>  
> -/*Reserved 1MB memory for MCU*/
> -/memreserve/ 0x05e00000 0x00100000;
> -
>  #include "hi6220.dtsi"
>  
>  / {
> @@ -24,8 +21,19 @@
>  		stdout-path = "serial0:115200n8";
>  	};
>  
> +	/*
> +	 * Reserve below regions from memory node:
> +	 *
> +	 *  - 0x05e0,0000 - 0x05ef,ffff: MCU firmware runtime using
> +	 *  - 0x06df,f000 - 0x06df,ffff: Mailbox message data
> +	 *  - 0x0740,f000 - 0x0740,ffff: MCU firmware section
> +	 *  - 0x3e00,0000 - 0x3fff,ffff: OP-TEE
> +	 */
>  	memory at 0 {
>  		device_type = "memory";
> -		reg = <0x0 0x0 0x0 0x40000000>;
> +		reg = <0x00000000 0x00000000 0x00000000 0x05e00000>,
> +		      <0x00000000 0x05f00000 0x00000000 0x00eff000>,
> +		      <0x00000000 0x06e00000 0x00000000 0x0060f000>,
> +		      <0x00000000 0x07410000 0x00000000 0x36bf0000>;
>  	};
>  };

Are you convinced by the before's patch arguments from Mark and I? i'd
like get green light from you.

Thanks,
Leo Yan

> -- 
> 1.9.1
> 

^ permalink raw reply	[flat|nested] 14+ messages in thread
end of thread, other threads:[~2015-10-16  7:30 UTC | newest]

Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-10-13  0:58 [PATCH v2 0/4] arm64: Hi6220: enable CPU idle states Leo Yan
2015-10-13  0:58 ` Leo Yan
2015-10-13  0:58 ` Leo Yan
2015-10-13  0:58 ` [PATCH v2 1/4] arm64: dts: Reserve memory regions for hi6220 Leo Yan
2015-10-13  0:58   ` Leo Yan
2015-10-13  0:58   ` Leo Yan
2015-10-16  7:30   ` Leo Yan
2015-10-16  7:30     ` Leo Yan
2015-10-13  0:58 ` [PATCH v2 2/4] arm64: Kconfig: select sp804 timer for ARCH_HISI Leo Yan
2015-10-13  0:58   ` Leo Yan
2015-10-13  0:58 ` [PATCH v2 3/4] arm64: dts: add sp804 timer node for Hi6220 Leo Yan
2015-10-13  0:58   ` Leo Yan
2015-10-13  0:58 ` [PATCH v2 4/4] arm64: dts: enable idle states " Leo Yan
2015-10-13  0:58   ` Leo Yan

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.