From: Vignesh R <vigneshr@ti.com>
To: Tony Lindgren <tony@atomide.com>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Benoit Cousson <bcousson@baylibre.com>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Russell King <linux@arm.linux.org.uk>,
<linux-omap@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, Vignesh R <vigneshr@ti.com>
Subject: [PATCH] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts
Date: Wed, 14 Oct 2015 11:22:36 +0530 [thread overview]
Message-ID: <1444801956-17817-1-git-send-email-vigneshr@ti.com> (raw)
On am437x-gp-evm, pixcir_i2c_ts can wakeup the system from lower power
state via pinctrl and IO daisy chain using generic wakeirq framework.
With commit 3fffd1283927 ("i2c: allow specifying separate wakeup
interrupt in device tree") i2c core allows optional wakeirq to be
specified via device tree. Add wakeup irq entry to enable pixcir_i2c_ts
to wake the system from low power state.
Signed-off-by: Vignesh R <vigneshr@ti.com>
---
arch/arm/boot/dts/am437x-gp-evm.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 22038f21f228..69e93af7df0d 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -581,8 +581,13 @@
attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ interrupts-extended = <&gpio3 22 GPIO_ACTIVE_HIGH>,
+ <&am43xx_pinmux 0x264>;
+ interrupt-names = "tsc", "wakeup";
+
touchscreen-size-x = <1024>;
touchscreen-size-y = <600>;
+ wakeup-source;
};
ov2659@30 {
--
2.6.1
WARNING: multiple messages have this Message-ID (diff)
From: Vignesh R <vigneshr-l0cyMroinI0@public.gmane.org>
To: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>,
Dmitry Torokhov
<dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Benoit Cousson <bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Vignesh R <vigneshr-l0cyMroinI0@public.gmane.org>
Subject: [PATCH] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts
Date: Wed, 14 Oct 2015 11:22:36 +0530 [thread overview]
Message-ID: <1444801956-17817-1-git-send-email-vigneshr@ti.com> (raw)
On am437x-gp-evm, pixcir_i2c_ts can wakeup the system from lower power
state via pinctrl and IO daisy chain using generic wakeirq framework.
With commit 3fffd1283927 ("i2c: allow specifying separate wakeup
interrupt in device tree") i2c core allows optional wakeirq to be
specified via device tree. Add wakeup irq entry to enable pixcir_i2c_ts
to wake the system from low power state.
Signed-off-by: Vignesh R <vigneshr-l0cyMroinI0@public.gmane.org>
---
arch/arm/boot/dts/am437x-gp-evm.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 22038f21f228..69e93af7df0d 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -581,8 +581,13 @@
attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ interrupts-extended = <&gpio3 22 GPIO_ACTIVE_HIGH>,
+ <&am43xx_pinmux 0x264>;
+ interrupt-names = "tsc", "wakeup";
+
touchscreen-size-x = <1024>;
touchscreen-size-y = <600>;
+ wakeup-source;
};
ov2659@30 {
--
2.6.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: vigneshr@ti.com (Vignesh R)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts
Date: Wed, 14 Oct 2015 11:22:36 +0530 [thread overview]
Message-ID: <1444801956-17817-1-git-send-email-vigneshr@ti.com> (raw)
On am437x-gp-evm, pixcir_i2c_ts can wakeup the system from lower power
state via pinctrl and IO daisy chain using generic wakeirq framework.
With commit 3fffd1283927 ("i2c: allow specifying separate wakeup
interrupt in device tree") i2c core allows optional wakeirq to be
specified via device tree. Add wakeup irq entry to enable pixcir_i2c_ts
to wake the system from low power state.
Signed-off-by: Vignesh R <vigneshr@ti.com>
---
arch/arm/boot/dts/am437x-gp-evm.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 22038f21f228..69e93af7df0d 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -581,8 +581,13 @@
attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ interrupts-extended = <&gpio3 22 GPIO_ACTIVE_HIGH>,
+ <&am43xx_pinmux 0x264>;
+ interrupt-names = "tsc", "wakeup";
+
touchscreen-size-x = <1024>;
touchscreen-size-y = <600>;
+ wakeup-source;
};
ov2659 at 30 {
--
2.6.1
next reply other threads:[~2015-10-14 5:53 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-14 5:52 Vignesh R [this message]
2015-10-14 5:52 ` [PATCH] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts Vignesh R
2015-10-14 5:52 ` Vignesh R
2015-10-14 8:46 ` Roger Quadros
2015-10-14 8:46 ` Roger Quadros
2015-10-14 8:46 ` Roger Quadros
2015-10-14 9:12 ` Vignesh R
2015-10-14 9:12 ` Vignesh R
2015-10-14 9:12 ` Vignesh R
2015-10-14 11:04 ` Roger Quadros
2015-10-14 11:04 ` Roger Quadros
2015-10-14 11:04 ` Roger Quadros
2015-10-14 11:37 ` Vignesh R
2015-10-14 11:37 ` Vignesh R
2015-10-14 11:37 ` Vignesh R
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444801956-17817-1-git-send-email-vigneshr@ti.com \
--to=vigneshr@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.