* [PATCH 0/4] ARM: berlin: improve multi_v7_defconfig support
@ 2015-10-14 10:34 ` Antoine Tenart
0 siblings, 0 replies; 16+ messages in thread
From: Antoine Tenart @ 2015-10-14 10:34 UTC (permalink / raw)
To: linux-arm-kernel
Hi all,
Some drivers used on a Marvell Berlin kernel were missing from
multi_v7_defconfig. This series add them.
Antoine
Antoine Tenart (4):
ARM: multi_v7_defconfig: enable Berlin SATA PHY
ARM: multi_v7_defconfig: enable Berlin USB PHY
ARM: multi_v7_defconfig: enable pxa168 Ethernet
ARM: multi_v7_defconfig: enable the Berlin ADC
arch/arm/configs/multi_v7_defconfig | 4 ++++
1 file changed, 4 insertions(+)
--
2.6.1
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 1/4] ARM: multi_v7_defconfig: enable Berlin SATA PHY
2015-10-14 10:34 ` Antoine Tenart
@ 2015-10-14 10:34 ` Antoine Tenart
-1 siblings, 0 replies; 16+ messages in thread
From: Antoine Tenart @ 2015-10-14 10:34 UTC (permalink / raw)
To: sebastian.hesselbarth, arm; +Cc: Antoine Tenart, linux-arm-kernel, linux-kernel
This PHY is required to have the SATA controller working on Berlin
and is missing from multi_v7_defconfig. Enable it.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
---
arch/arm/configs/multi_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 03deb7fb35e8..94d75e81ca19 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -651,6 +651,7 @@ CONFIG_PHY_HIX5HD2_SATA=y
CONFIG_PWM_STI=m
CONFIG_OMAP_USB2=y
CONFIG_TI_PIPE3=y
+CONFIG_PHY_BERLIN_SATA=y
CONFIG_PHY_MIPHY28LP=y
CONFIG_PHY_MIPHY365X=y
CONFIG_PHY_RCAR_GEN2=m
--
2.6.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 1/4] ARM: multi_v7_defconfig: enable Berlin SATA PHY
@ 2015-10-14 10:34 ` Antoine Tenart
0 siblings, 0 replies; 16+ messages in thread
From: Antoine Tenart @ 2015-10-14 10:34 UTC (permalink / raw)
To: linux-arm-kernel
This PHY is required to have the SATA controller working on Berlin
and is missing from multi_v7_defconfig. Enable it.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
---
arch/arm/configs/multi_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 03deb7fb35e8..94d75e81ca19 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -651,6 +651,7 @@ CONFIG_PHY_HIX5HD2_SATA=y
CONFIG_PWM_STI=m
CONFIG_OMAP_USB2=y
CONFIG_TI_PIPE3=y
+CONFIG_PHY_BERLIN_SATA=y
CONFIG_PHY_MIPHY28LP=y
CONFIG_PHY_MIPHY365X=y
CONFIG_PHY_RCAR_GEN2=m
--
2.6.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 2/4] ARM: multi_v7_defconfig: enable Berlin USB PHY
2015-10-14 10:34 ` Antoine Tenart
@ 2015-10-14 10:34 ` Antoine Tenart
-1 siblings, 0 replies; 16+ messages in thread
From: Antoine Tenart @ 2015-10-14 10:34 UTC (permalink / raw)
To: sebastian.hesselbarth, arm; +Cc: Antoine Tenart, linux-arm-kernel, linux-kernel
This PHY is required to have the USB controller working on Berlin
and is missing from multi_v7_defconfig. Enable it.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
---
arch/arm/configs/multi_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 94d75e81ca19..2f8984618236 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -651,6 +651,7 @@ CONFIG_PHY_HIX5HD2_SATA=y
CONFIG_PWM_STI=m
CONFIG_OMAP_USB2=y
CONFIG_TI_PIPE3=y
+CONFIG_PHY_BERLIN_USB=y
CONFIG_PHY_BERLIN_SATA=y
CONFIG_PHY_MIPHY28LP=y
CONFIG_PHY_MIPHY365X=y
--
2.6.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 2/4] ARM: multi_v7_defconfig: enable Berlin USB PHY
@ 2015-10-14 10:34 ` Antoine Tenart
0 siblings, 0 replies; 16+ messages in thread
From: Antoine Tenart @ 2015-10-14 10:34 UTC (permalink / raw)
To: linux-arm-kernel
This PHY is required to have the USB controller working on Berlin
and is missing from multi_v7_defconfig. Enable it.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
---
arch/arm/configs/multi_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 94d75e81ca19..2f8984618236 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -651,6 +651,7 @@ CONFIG_PHY_HIX5HD2_SATA=y
CONFIG_PWM_STI=m
CONFIG_OMAP_USB2=y
CONFIG_TI_PIPE3=y
+CONFIG_PHY_BERLIN_USB=y
CONFIG_PHY_BERLIN_SATA=y
CONFIG_PHY_MIPHY28LP=y
CONFIG_PHY_MIPHY365X=y
--
2.6.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 3/4] ARM: multi_v7_defconfig: enable pxa168 Ethernet
2015-10-14 10:34 ` Antoine Tenart
@ 2015-10-14 10:34 ` Antoine Tenart
-1 siblings, 0 replies; 16+ messages in thread
From: Antoine Tenart @ 2015-10-14 10:34 UTC (permalink / raw)
To: sebastian.hesselbarth, arm; +Cc: Antoine Tenart, linux-arm-kernel, linux-kernel
The Marvell pxa168 ethernet controller is used on Berlin SoCs and is
missing from multi_v7_defconfig. Enable it.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
---
arch/arm/configs/multi_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 2f8984618236..e45f80df403c 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -207,6 +207,7 @@ CONFIG_NET_CALXEDA_XGMAC=y
CONFIG_IGB=y
CONFIG_MV643XX_ETH=y
CONFIG_MVNETA=y
+CONFIG_PXA168_ETH=y
CONFIG_KS8851=y
CONFIG_R8169=y
CONFIG_SH_ETH=y
--
2.6.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 3/4] ARM: multi_v7_defconfig: enable pxa168 Ethernet
@ 2015-10-14 10:34 ` Antoine Tenart
0 siblings, 0 replies; 16+ messages in thread
From: Antoine Tenart @ 2015-10-14 10:34 UTC (permalink / raw)
To: linux-arm-kernel
The Marvell pxa168 ethernet controller is used on Berlin SoCs and is
missing from multi_v7_defconfig. Enable it.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
---
arch/arm/configs/multi_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 2f8984618236..e45f80df403c 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -207,6 +207,7 @@ CONFIG_NET_CALXEDA_XGMAC=y
CONFIG_IGB=y
CONFIG_MV643XX_ETH=y
CONFIG_MVNETA=y
+CONFIG_PXA168_ETH=y
CONFIG_KS8851=y
CONFIG_R8169=y
CONFIG_SH_ETH=y
--
2.6.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 4/4] ARM: multi_v7_defconfig: enable the Berlin ADC
2015-10-14 10:34 ` Antoine Tenart
@ 2015-10-14 10:34 ` Antoine Tenart
-1 siblings, 0 replies; 16+ messages in thread
From: Antoine Tenart @ 2015-10-14 10:34 UTC (permalink / raw)
To: sebastian.hesselbarth, arm; +Cc: Antoine Tenart, linux-arm-kernel, linux-kernel
Enable the Marvell Berlin ADC support in multi_v7_defconfig.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
---
arch/arm/configs/multi_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index e45f80df403c..2d5c77286a2a 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -637,6 +637,7 @@ CONFIG_EXTCON=y
CONFIG_TI_AEMIF=y
CONFIG_IIO=y
CONFIG_AT91_ADC=m
+CONFIG_BERLIN2_ADC=y
CONFIG_EXYNOS_ADC=m
CONFIG_XILINX_XADC=y
CONFIG_AK8975=y
--
2.6.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 4/4] ARM: multi_v7_defconfig: enable the Berlin ADC
@ 2015-10-14 10:34 ` Antoine Tenart
0 siblings, 0 replies; 16+ messages in thread
From: Antoine Tenart @ 2015-10-14 10:34 UTC (permalink / raw)
To: linux-arm-kernel
Enable the Marvell Berlin ADC support in multi_v7_defconfig.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
---
arch/arm/configs/multi_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index e45f80df403c..2d5c77286a2a 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -637,6 +637,7 @@ CONFIG_EXTCON=y
CONFIG_TI_AEMIF=y
CONFIG_IIO=y
CONFIG_AT91_ADC=m
+CONFIG_BERLIN2_ADC=y
CONFIG_EXYNOS_ADC=m
CONFIG_XILINX_XADC=y
CONFIG_AK8975=y
--
2.6.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [PATCH 0/4] ARM: berlin: improve multi_v7_defconfig support
2015-10-14 10:34 ` Antoine Tenart
@ 2015-10-14 12:36 ` Arnd Bergmann
-1 siblings, 0 replies; 16+ messages in thread
From: Arnd Bergmann @ 2015-10-14 12:36 UTC (permalink / raw)
To: Antoine Tenart; +Cc: sebastian.hesselbarth, arm, linux-arm-kernel, linux-kernel
On Wednesday 14 October 2015 12:34:00 Antoine Tenart wrote:
> Hi all,
>
> Some drivers used on a Marvell Berlin kernel were missing from
> multi_v7_defconfig. This series add them.
Adding them is great, but we try to have as much as possible
in loadable modules for new additions. Can you do this?
Having a single patch instead of four different ones is fine too,
by the way.
Arnd
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 0/4] ARM: berlin: improve multi_v7_defconfig support
@ 2015-10-14 12:36 ` Arnd Bergmann
0 siblings, 0 replies; 16+ messages in thread
From: Arnd Bergmann @ 2015-10-14 12:36 UTC (permalink / raw)
To: linux-arm-kernel
On Wednesday 14 October 2015 12:34:00 Antoine Tenart wrote:
> Hi all,
>
> Some drivers used on a Marvell Berlin kernel were missing from
> multi_v7_defconfig. This series add them.
Adding them is great, but we try to have as much as possible
in loadable modules for new additions. Can you do this?
Having a single patch instead of four different ones is fine too,
by the way.
Arnd
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 0/4] ARM: berlin: improve multi_v7_defconfig support
2015-10-14 12:36 ` Arnd Bergmann
@ 2015-10-14 13:09 ` Antoine Tenart
-1 siblings, 0 replies; 16+ messages in thread
From: Antoine Tenart @ 2015-10-14 13:09 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Antoine Tenart, sebastian.hesselbarth, arm, linux-arm-kernel,
linux-kernel
Hi Arnd,
On Wed, Oct 14, 2015 at 02:36:21PM +0200, Arnd Bergmann wrote:
> On Wednesday 14 October 2015 12:34:00 Antoine Tenart wrote:
> >
> > Some drivers used on a Marvell Berlin kernel were missing from
> > multi_v7_defconfig. This series add them.
>
> Adding them is great, but we try to have as much as possible
> in loadable modules for new additions. Can you do this?
Sure, I'll do this for the Ethernet and the ADC drivers. But we already
have the SATA and USB features built-in with multi_v7_defconfig, so I'll
keep the two PHY drivers built-in.
> Having a single patch instead of four different ones is fine too,
> by the way.
And I'll put them into a single patch.
Thanks,
Antoine
--
Antoine Ténart, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 0/4] ARM: berlin: improve multi_v7_defconfig support
@ 2015-10-14 13:09 ` Antoine Tenart
0 siblings, 0 replies; 16+ messages in thread
From: Antoine Tenart @ 2015-10-14 13:09 UTC (permalink / raw)
To: linux-arm-kernel
Hi Arnd,
On Wed, Oct 14, 2015 at 02:36:21PM +0200, Arnd Bergmann wrote:
> On Wednesday 14 October 2015 12:34:00 Antoine Tenart wrote:
> >
> > Some drivers used on a Marvell Berlin kernel were missing from
> > multi_v7_defconfig. This series add them.
>
> Adding them is great, but we try to have as much as possible
> in loadable modules for new additions. Can you do this?
Sure, I'll do this for the Ethernet and the ADC drivers. But we already
have the SATA and USB features built-in with multi_v7_defconfig, so I'll
keep the two PHY drivers built-in.
> Having a single patch instead of four different ones is fine too,
> by the way.
And I'll put them into a single patch.
Thanks,
Antoine
--
Antoine T?nart, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 0/4] ARM: berlin: improve multi_v7_defconfig support
2015-10-14 13:09 ` Antoine Tenart
@ 2015-10-14 13:23 ` Arnd Bergmann
-1 siblings, 0 replies; 16+ messages in thread
From: Arnd Bergmann @ 2015-10-14 13:23 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: Antoine Tenart, arm, linux-kernel, sebastian.hesselbarth
On Wednesday 14 October 2015 15:09:35 Antoine Tenart wrote:
> Hi Arnd,
>
> On Wed, Oct 14, 2015 at 02:36:21PM +0200, Arnd Bergmann wrote:
> > On Wednesday 14 October 2015 12:34:00 Antoine Tenart wrote:
> > >
> > > Some drivers used on a Marvell Berlin kernel were missing from
> > > multi_v7_defconfig. This series add them.
> >
> > Adding them is great, but we try to have as much as possible
> > in loadable modules for new additions. Can you do this?
>
> Sure, I'll do this for the Ethernet and the ADC drivers. But we already
> have the SATA and USB features built-in with multi_v7_defconfig, so I'll
> keep the two PHY drivers built-in.
>
>
Ok, fair enough.
Arnd
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 0/4] ARM: berlin: improve multi_v7_defconfig support
@ 2015-10-14 13:23 ` Arnd Bergmann
0 siblings, 0 replies; 16+ messages in thread
From: Arnd Bergmann @ 2015-10-14 13:23 UTC (permalink / raw)
To: linux-arm-kernel
On Wednesday 14 October 2015 15:09:35 Antoine Tenart wrote:
> Hi Arnd,
>
> On Wed, Oct 14, 2015 at 02:36:21PM +0200, Arnd Bergmann wrote:
> > On Wednesday 14 October 2015 12:34:00 Antoine Tenart wrote:
> > >
> > > Some drivers used on a Marvell Berlin kernel were missing from
> > > multi_v7_defconfig. This series add them.
> >
> > Adding them is great, but we try to have as much as possible
> > in loadable modules for new additions. Can you do this?
>
> Sure, I'll do this for the Ethernet and the ADC drivers. But we already
> have the SATA and USB features built-in with multi_v7_defconfig, so I'll
> keep the two PHY drivers built-in.
>
>
Ok, fair enough.
Arnd
^ permalink raw reply [flat|nested] 16+ messages in thread