[PATCH 00/12] drm/msm/dsi: Add support for DSI on MSM8960/APQ8064

[PATCH 00/12] drm/msm/dsi: Add support for DSI on MSM8960/APQ8064

[Archit Taneja]

Add support for DSI on 8960/8064. The DSI IP used in these chips is an
older version(DSIv2) of what we have right now(DSI6G).

The bulk of the additions come thanks to a different PHY/PLL. The DSI
host in itself doesn't have too many changes.

Archit Taneja (12):
  drm/msm/dsi: Update generated header for 8960
  drm/msm/dsi: Add support for 28nm PHY on 8960
  drm/msm/dsi: Add DSI PLL for 28nm 8960 PHY
  drm/msm/dsi: Use a better way to figure out DSI version
  drm/msm/dsi: Delay dsi_clk_init
  drm/msm/dsi: Parse bus clocks from a list
  drm/msm/dsi: Set up link clocks for DSIv2
  drm/msm/dsi: Add dsi_cfg for APQ8064
  drm/msm/dsi: Don't use iommu for command TX buffer for DSIv2
  drm/msm/dsi: SFPB: Update generated headers
  drm/msm/dsi: Enable MMSS SPFB port via syscon
  dt-bindings: Add DSIv2 documentation

 Documentation/devicetree/bindings/drm/msm/dsi.txt |  10 +-
 drivers/gpu/drm/msm/Kconfig                       |   8 +
 drivers/gpu/drm/msm/Makefile                      |   2 +
 drivers/gpu/drm/msm/dsi/dsi.h                     |   6 +-
 drivers/gpu/drm/msm/dsi/dsi.xml.h                 | 243 +++++++---
 drivers/gpu/drm/msm/dsi/dsi_cfg.c                 |  35 +-
 drivers/gpu/drm/msm/dsi/dsi_cfg.h                 |   4 +
 drivers/gpu/drm/msm/dsi/dsi_host.c                | 497 ++++++++++++++------
 drivers/gpu/drm/msm/dsi/dsi_manager.c             |   6 +-
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c             |   4 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.h             |   1 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c   | 195 ++++++++
 drivers/gpu/drm/msm/dsi/pll/dsi_pll.c             |   3 +
 drivers/gpu/drm/msm/dsi/pll/dsi_pll.h             |  10 +
 drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c   | 529 ++++++++++++++++++++++
 drivers/gpu/drm/msm/dsi/sfpb.xml.h                |  26 +-
 16 files changed, 1363 insertions(+), 216 deletions(-)
 create mode 100644 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
 create mode 100644 drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 01/12] drm/msm/dsi: Update generated header for 8960

[Archit Taneja]

The DSI PLL and PHY registers are already there for 8960, but their
offsets are relative to the top level DSI controller base.

Make the offsets relative to the individual sub blocks. Add "28nm" in
the register names while we're at it.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/dsi.xml.h | 243 +++++++++++++++++++++++++++-----------
 1 file changed, 177 insertions(+), 66 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi.xml.h b/drivers/gpu/drm/msm/dsi/dsi.xml.h
index 1d2e32f..3d6297f 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.xml.h
+++ b/drivers/gpu/drm/msm/dsi/dsi.xml.h
@@ -8,17 +8,8 @@ http://github.com/freedreno/envytools/
 git clone https://github.com/freedreno/envytools.git
 
 The rules-ng-ng source files this header was generated from are:
-- /home/robclark/src/freedreno/envytools/rnndb/msm.xml                 (    676 bytes, from 2015-05-20 20:03:14)
-- /home/robclark/src/freedreno/envytools/rnndb/freedreno_copyright.xml (   1453 bytes, from 2015-05-20 20:03:07)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp4.xml            (  20915 bytes, from 2015-05-20 20:03:14)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp_common.xml      (   2576 bytes, from 2015-07-09 22:10:24)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp5.xml            (  36021 bytes, from 2015-07-09 22:10:24)
-- /home/robclark/src/freedreno/envytools/rnndb/dsi/dsi.xml             (  26057 bytes, from 2015-08-14 21:47:57)
-- /home/robclark/src/freedreno/envytools/rnndb/dsi/sfpb.xml            (    344 bytes, from 2015-05-20 20:03:07)
-- /home/robclark/src/freedreno/envytools/rnndb/dsi/mmss_cc.xml         (   1686 bytes, from 2015-05-20 20:03:14)
-- /home/robclark/src/freedreno/envytools/rnndb/hdmi/qfprom.xml         (    600 bytes, from 2015-05-20 20:03:07)
-- /home/robclark/src/freedreno/envytools/rnndb/hdmi/hdmi.xml           (  29154 bytes, from 2015-08-10 21:25:43)
-- /home/robclark/src/freedreno/envytools/rnndb/edp/edp.xml             (  10416 bytes, from 2015-05-20 20:03:14)
+- /local/mnt/workspace/source_trees/envytools/rnndb/../rnndb/dsi/dsi.xml    (  27887 bytes, from 2015-09-02 06:17:10)
+- /local/mnt/workspace/source_trees/envytools/rnndb/freedreno_copyright.xml (   1453 bytes, from 2015-02-09 03:18:10)
 
 Copyright (C) 2013-2015 by the following authors:
 - Rob Clark <robdclark@gmail.com> (robclark)
@@ -567,114 +558,234 @@ static inline uint32_t DSI_VERSION_MAJOR(uint32_t val)
 #define REG_DSI_8x60_PHY_CAL_STATUS				0x000000fc
 #define DSI_8x60_PHY_CAL_STATUS_CAL_BUSY			0x10000000
 
-static inline uint32_t REG_DSI_8960_LN(uint32_t i0) { return 0x00000300 + 0x40*i0; }
+static inline uint32_t REG_DSI_28nm_8960_PHY_LN(uint32_t i0) { return 0x00000000 + 0x40*i0; }
 
-static inline uint32_t REG_DSI_8960_LN_CFG_0(uint32_t i0) { return 0x00000300 + 0x40*i0; }
+static inline uint32_t REG_DSI_28nm_8960_PHY_LN_CFG_0(uint32_t i0) { return 0x00000000 + 0x40*i0; }
 
-static inline uint32_t REG_DSI_8960_LN_CFG_1(uint32_t i0) { return 0x00000304 + 0x40*i0; }
+static inline uint32_t REG_DSI_28nm_8960_PHY_LN_CFG_1(uint32_t i0) { return 0x00000004 + 0x40*i0; }
 
-static inline uint32_t REG_DSI_8960_LN_CFG_2(uint32_t i0) { return 0x00000308 + 0x40*i0; }
+static inline uint32_t REG_DSI_28nm_8960_PHY_LN_CFG_2(uint32_t i0) { return 0x00000008 + 0x40*i0; }
 
-static inline uint32_t REG_DSI_8960_LN_TEST_DATAPATH(uint32_t i0) { return 0x0000030c + 0x40*i0; }
+static inline uint32_t REG_DSI_28nm_8960_PHY_LN_TEST_DATAPATH(uint32_t i0) { return 0x0000000c + 0x40*i0; }
 
-static inline uint32_t REG_DSI_8960_LN_TEST_STR_0(uint32_t i0) { return 0x00000314 + 0x40*i0; }
+static inline uint32_t REG_DSI_28nm_8960_PHY_LN_TEST_STR_0(uint32_t i0) { return 0x00000014 + 0x40*i0; }
 
-static inline uint32_t REG_DSI_8960_LN_TEST_STR_1(uint32_t i0) { return 0x00000318 + 0x40*i0; }
+static inline uint32_t REG_DSI_28nm_8960_PHY_LN_TEST_STR_1(uint32_t i0) { return 0x00000018 + 0x40*i0; }
 
-#define REG_DSI_8960_PHY_LNCK_CFG_0				0x00000400
+#define REG_DSI_28nm_8960_PHY_LNCK_CFG_0			0x00000100
 
-#define REG_DSI_8960_PHY_LNCK_CFG_1				0x00000404
+#define REG_DSI_28nm_8960_PHY_LNCK_CFG_1			0x00000104
 
-#define REG_DSI_8960_PHY_LNCK_CFG_2				0x00000408
+#define REG_DSI_28nm_8960_PHY_LNCK_CFG_2			0x00000108
 
-#define REG_DSI_8960_PHY_LNCK_TEST_DATAPATH			0x0000040c
+#define REG_DSI_28nm_8960_PHY_LNCK_TEST_DATAPATH		0x0000010c
 
-#define REG_DSI_8960_PHY_LNCK_TEST_STR0				0x00000414
+#define REG_DSI_28nm_8960_PHY_LNCK_TEST_STR0			0x00000114
 
-#define REG_DSI_8960_PHY_LNCK_TEST_STR1				0x00000418
+#define REG_DSI_28nm_8960_PHY_LNCK_TEST_STR1			0x00000118
 
-#define REG_DSI_8960_PHY_TIMING_CTRL_0				0x00000440
+#define REG_DSI_28nm_8960_PHY_TIMING_CTRL_0			0x00000140
+#define DSI_28nm_8960_PHY_TIMING_CTRL_0_CLK_ZERO__MASK		0x000000ff
+#define DSI_28nm_8960_PHY_TIMING_CTRL_0_CLK_ZERO__SHIFT		0
+static inline uint32_t DSI_28nm_8960_PHY_TIMING_CTRL_0_CLK_ZERO(uint32_t val)
+{
+	return ((val) << DSI_28nm_8960_PHY_TIMING_CTRL_0_CLK_ZERO__SHIFT) & DSI_28nm_8960_PHY_TIMING_CTRL_0_CLK_ZERO__MASK;
+}
+
+#define REG_DSI_28nm_8960_PHY_TIMING_CTRL_1			0x00000144
+#define DSI_28nm_8960_PHY_TIMING_CTRL_1_CLK_TRAIL__MASK		0x000000ff
+#define DSI_28nm_8960_PHY_TIMING_CTRL_1_CLK_TRAIL__SHIFT	0
+static inline uint32_t DSI_28nm_8960_PHY_TIMING_CTRL_1_CLK_TRAIL(uint32_t val)
+{
+	return ((val) << DSI_28nm_8960_PHY_TIMING_CTRL_1_CLK_TRAIL__SHIFT) & DSI_28nm_8960_PHY_TIMING_CTRL_1_CLK_TRAIL__MASK;
+}
+
+#define REG_DSI_28nm_8960_PHY_TIMING_CTRL_2			0x00000148
+#define DSI_28nm_8960_PHY_TIMING_CTRL_2_CLK_PREPARE__MASK	0x000000ff
+#define DSI_28nm_8960_PHY_TIMING_CTRL_2_CLK_PREPARE__SHIFT	0
+static inline uint32_t DSI_28nm_8960_PHY_TIMING_CTRL_2_CLK_PREPARE(uint32_t val)
+{
+	return ((val) << DSI_28nm_8960_PHY_TIMING_CTRL_2_CLK_PREPARE__SHIFT) & DSI_28nm_8960_PHY_TIMING_CTRL_2_CLK_PREPARE__MASK;
+}
+
+#define REG_DSI_28nm_8960_PHY_TIMING_CTRL_3			0x0000014c
+
+#define REG_DSI_28nm_8960_PHY_TIMING_CTRL_4			0x00000150
+#define DSI_28nm_8960_PHY_TIMING_CTRL_4_HS_EXIT__MASK		0x000000ff
+#define DSI_28nm_8960_PHY_TIMING_CTRL_4_HS_EXIT__SHIFT		0
+static inline uint32_t DSI_28nm_8960_PHY_TIMING_CTRL_4_HS_EXIT(uint32_t val)
+{
+	return ((val) << DSI_28nm_8960_PHY_TIMING_CTRL_4_HS_EXIT__SHIFT) & DSI_28nm_8960_PHY_TIMING_CTRL_4_HS_EXIT__MASK;
+}
+
+#define REG_DSI_28nm_8960_PHY_TIMING_CTRL_5			0x00000154
+#define DSI_28nm_8960_PHY_TIMING_CTRL_5_HS_ZERO__MASK		0x000000ff
+#define DSI_28nm_8960_PHY_TIMING_CTRL_5_HS_ZERO__SHIFT		0
+static inline uint32_t DSI_28nm_8960_PHY_TIMING_CTRL_5_HS_ZERO(uint32_t val)
+{
+	return ((val) << DSI_28nm_8960_PHY_TIMING_CTRL_5_HS_ZERO__SHIFT) & DSI_28nm_8960_PHY_TIMING_CTRL_5_HS_ZERO__MASK;
+}
+
+#define REG_DSI_28nm_8960_PHY_TIMING_CTRL_6			0x00000158
+#define DSI_28nm_8960_PHY_TIMING_CTRL_6_HS_PREPARE__MASK	0x000000ff
+#define DSI_28nm_8960_PHY_TIMING_CTRL_6_HS_PREPARE__SHIFT	0
+static inline uint32_t DSI_28nm_8960_PHY_TIMING_CTRL_6_HS_PREPARE(uint32_t val)
+{
+	return ((val) << DSI_28nm_8960_PHY_TIMING_CTRL_6_HS_PREPARE__SHIFT) & DSI_28nm_8960_PHY_TIMING_CTRL_6_HS_PREPARE__MASK;
+}
+
+#define REG_DSI_28nm_8960_PHY_TIMING_CTRL_7			0x0000015c
+#define DSI_28nm_8960_PHY_TIMING_CTRL_7_HS_TRAIL__MASK		0x000000ff
+#define DSI_28nm_8960_PHY_TIMING_CTRL_7_HS_TRAIL__SHIFT		0
+static inline uint32_t DSI_28nm_8960_PHY_TIMING_CTRL_7_HS_TRAIL(uint32_t val)
+{
+	return ((val) << DSI_28nm_8960_PHY_TIMING_CTRL_7_HS_TRAIL__SHIFT) & DSI_28nm_8960_PHY_TIMING_CTRL_7_HS_TRAIL__MASK;
+}
+
+#define REG_DSI_28nm_8960_PHY_TIMING_CTRL_8			0x00000160
+#define DSI_28nm_8960_PHY_TIMING_CTRL_8_HS_RQST__MASK		0x000000ff
+#define DSI_28nm_8960_PHY_TIMING_CTRL_8_HS_RQST__SHIFT		0
+static inline uint32_t DSI_28nm_8960_PHY_TIMING_CTRL_8_HS_RQST(uint32_t val)
+{
+	return ((val) << DSI_28nm_8960_PHY_TIMING_CTRL_8_HS_RQST__SHIFT) & DSI_28nm_8960_PHY_TIMING_CTRL_8_HS_RQST__MASK;
+}
+
+#define REG_DSI_28nm_8960_PHY_TIMING_CTRL_9			0x00000164
+#define DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_GO__MASK		0x00000007
+#define DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_GO__SHIFT		0
+static inline uint32_t DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_GO(uint32_t val)
+{
+	return ((val) << DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_GO__SHIFT) & DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_GO__MASK;
+}
+#define DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_SURE__MASK		0x00000070
+#define DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_SURE__SHIFT		4
+static inline uint32_t DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_SURE(uint32_t val)
+{
+	return ((val) << DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_SURE__SHIFT) & DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_SURE__MASK;
+}
+
+#define REG_DSI_28nm_8960_PHY_TIMING_CTRL_10			0x00000168
+#define DSI_28nm_8960_PHY_TIMING_CTRL_10_TA_GET__MASK		0x00000007
+#define DSI_28nm_8960_PHY_TIMING_CTRL_10_TA_GET__SHIFT		0
+static inline uint32_t DSI_28nm_8960_PHY_TIMING_CTRL_10_TA_GET(uint32_t val)
+{
+	return ((val) << DSI_28nm_8960_PHY_TIMING_CTRL_10_TA_GET__SHIFT) & DSI_28nm_8960_PHY_TIMING_CTRL_10_TA_GET__MASK;
+}
+
+#define REG_DSI_28nm_8960_PHY_TIMING_CTRL_11			0x0000016c
+#define DSI_28nm_8960_PHY_TIMING_CTRL_11_TRIG3_CMD__MASK	0x000000ff
+#define DSI_28nm_8960_PHY_TIMING_CTRL_11_TRIG3_CMD__SHIFT	0
+static inline uint32_t DSI_28nm_8960_PHY_TIMING_CTRL_11_TRIG3_CMD(uint32_t val)
+{
+	return ((val) << DSI_28nm_8960_PHY_TIMING_CTRL_11_TRIG3_CMD__SHIFT) & DSI_28nm_8960_PHY_TIMING_CTRL_11_TRIG3_CMD__MASK;
+}
+
+#define REG_DSI_28nm_8960_PHY_CTRL_0				0x00000170
+
+#define REG_DSI_28nm_8960_PHY_CTRL_1				0x00000174
+
+#define REG_DSI_28nm_8960_PHY_CTRL_2				0x00000178
+
+#define REG_DSI_28nm_8960_PHY_CTRL_3				0x0000017c
+
+#define REG_DSI_28nm_8960_PHY_STRENGTH_0			0x00000180
+
+#define REG_DSI_28nm_8960_PHY_STRENGTH_1			0x00000184
+
+#define REG_DSI_28nm_8960_PHY_STRENGTH_2			0x00000188
+
+#define REG_DSI_28nm_8960_PHY_BIST_CTRL_0			0x0000018c
+
+#define REG_DSI_28nm_8960_PHY_BIST_CTRL_1			0x00000190
+
+#define REG_DSI_28nm_8960_PHY_BIST_CTRL_2			0x00000194
+
+#define REG_DSI_28nm_8960_PHY_BIST_CTRL_3			0x00000198
+
+#define REG_DSI_28nm_8960_PHY_BIST_CTRL_4			0x0000019c
 
-#define REG_DSI_8960_PHY_TIMING_CTRL_1				0x00000444
+#define REG_DSI_28nm_8960_PHY_LDO_CTRL				0x000001b0
 
-#define REG_DSI_8960_PHY_TIMING_CTRL_2				0x00000448
+#define REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_0		0x00000000
 
-#define REG_DSI_8960_PHY_TIMING_CTRL_3				0x0000044c
+#define REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_1		0x00000004
 
-#define REG_DSI_8960_PHY_TIMING_CTRL_4				0x00000450
+#define REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_2		0x00000008
 
-#define REG_DSI_8960_PHY_TIMING_CTRL_5				0x00000454
+#define REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_3		0x0000000c
 
-#define REG_DSI_8960_PHY_TIMING_CTRL_6				0x00000458
+#define REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_4		0x00000010
 
-#define REG_DSI_8960_PHY_TIMING_CTRL_7				0x0000045c
+#define REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_5		0x00000014
 
-#define REG_DSI_8960_PHY_TIMING_CTRL_8				0x00000460
+#define REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CAL_PWR_CFG	0x00000018
 
-#define REG_DSI_8960_PHY_TIMING_CTRL_9				0x00000464
+#define REG_DSI_28nm_8960_PHY_MISC_CAL_HW_TRIGGER		0x00000028
 
-#define REG_DSI_8960_PHY_TIMING_CTRL_10				0x00000468
+#define REG_DSI_28nm_8960_PHY_MISC_CAL_SW_CFG_0			0x0000002c
 
-#define REG_DSI_8960_PHY_TIMING_CTRL_11				0x0000046c
+#define REG_DSI_28nm_8960_PHY_MISC_CAL_SW_CFG_1			0x00000030
 
-#define REG_DSI_8960_PHY_CTRL_0					0x00000470
+#define REG_DSI_28nm_8960_PHY_MISC_CAL_SW_CFG_2			0x00000034
 
-#define REG_DSI_8960_PHY_CTRL_1					0x00000474
+#define REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_0			0x00000038
 
-#define REG_DSI_8960_PHY_CTRL_2					0x00000478
+#define REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_1			0x0000003c
 
-#define REG_DSI_8960_PHY_CTRL_3					0x0000047c
+#define REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_2			0x00000040
 
-#define REG_DSI_8960_PHY_STRENGTH_0				0x00000480
+#define REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_3			0x00000044
 
-#define REG_DSI_8960_PHY_STRENGTH_1				0x00000484
+#define REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_4			0x00000048
 
-#define REG_DSI_8960_PHY_STRENGTH_2				0x00000488
+#define REG_DSI_28nm_8960_PHY_MISC_CAL_STATUS			0x00000050
+#define DSI_28nm_8960_PHY_MISC_CAL_STATUS_CAL_BUSY		0x00000010
 
-#define REG_DSI_8960_PHY_BIST_CTRL_0				0x0000048c
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_0			0x00000000
+#define DSI_28nm_8960_PHY_PLL_CTRL_0_ENABLE			0x00000001
 
-#define REG_DSI_8960_PHY_BIST_CTRL_1				0x00000490
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_1			0x00000004
 
-#define REG_DSI_8960_PHY_BIST_CTRL_2				0x00000494
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_2			0x00000008
 
-#define REG_DSI_8960_PHY_BIST_CTRL_3				0x00000498
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_3			0x0000000c
 
-#define REG_DSI_8960_PHY_BIST_CTRL_4				0x0000049c
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_4			0x00000010
 
-#define REG_DSI_8960_PHY_LDO_CTRL				0x000004b0
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_5			0x00000014
 
-#define REG_DSI_8960_PHY_REGULATOR_CTRL_0			0x00000500
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_6			0x00000018
 
-#define REG_DSI_8960_PHY_REGULATOR_CTRL_1			0x00000504
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_7			0x0000001c
 
-#define REG_DSI_8960_PHY_REGULATOR_CTRL_2			0x00000508
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_8			0x00000020
 
-#define REG_DSI_8960_PHY_REGULATOR_CTRL_3			0x0000050c
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_9			0x00000024
 
-#define REG_DSI_8960_PHY_REGULATOR_CTRL_4			0x00000510
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_10			0x00000028
 
-#define REG_DSI_8960_PHY_REGULATOR_CAL_PWR_CFG			0x00000518
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_11			0x0000002c
 
-#define REG_DSI_8960_PHY_CAL_HW_TRIGGER				0x00000528
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_12			0x00000030
 
-#define REG_DSI_8960_PHY_CAL_SW_CFG_0				0x0000052c
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_13			0x00000034
 
-#define REG_DSI_8960_PHY_CAL_SW_CFG_1				0x00000530
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_14			0x00000038
 
-#define REG_DSI_8960_PHY_CAL_SW_CFG_2				0x00000534
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_15			0x0000003c
 
-#define REG_DSI_8960_PHY_CAL_HW_CFG_0				0x00000538
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_16			0x00000040
 
-#define REG_DSI_8960_PHY_CAL_HW_CFG_1				0x0000053c
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_17			0x00000044
 
-#define REG_DSI_8960_PHY_CAL_HW_CFG_2				0x00000540
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_18			0x00000048
 
-#define REG_DSI_8960_PHY_CAL_HW_CFG_3				0x00000544
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_19			0x0000004c
 
-#define REG_DSI_8960_PHY_CAL_HW_CFG_4				0x00000548
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_20			0x00000050
 
-#define REG_DSI_8960_PHY_CAL_STATUS				0x00000550
-#define DSI_8960_PHY_CAL_STATUS_CAL_BUSY			0x00000010
+#define REG_DSI_28nm_8960_PHY_PLL_RDY				0x00000080
+#define DSI_28nm_8960_PHY_PLL_RDY_PLL_RDY			0x00000001
 
 static inline uint32_t REG_DSI_28nm_PHY_LN(uint32_t i0) { return 0x00000000 + 0x40*i0; }
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 02/12] drm/msm/dsi: Add support for 28nm PHY on 8960

[Archit Taneja]

DSI PHY on MSM8960 and APQ8064 is a 28nm PHY that's different from the
supported 28nm LP PHY found in newer chips.

Add support for the new PHY.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/Kconfig                     |   8 +
 drivers/gpu/drm/msm/Makefile                    |   1 +
 drivers/gpu/drm/msm/dsi/dsi.h                   |   1 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c           |   4 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.h           |   1 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 195 ++++++++++++++++++++++++
 6 files changed, 210 insertions(+)
 create mode 100644 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c

diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
index 8e6c7c6..38a618e 100644
--- a/drivers/gpu/drm/msm/Kconfig
+++ b/drivers/gpu/drm/msm/Kconfig
@@ -68,3 +68,11 @@ config DRM_MSM_DSI_20NM_PHY
 	default y
 	help
 	  Choose this option if the 20nm DSI PHY is used on the platform.
+
+config DRM_MSM_DSI_28NM_8960_PHY
+	bool "Enable DSI 28nm 8960 PHY driver in MSM DRM"
+	depends on DRM_MSM_DSI
+	default y
+	help
+	  Choose this option if the 28nm DSI PHY 8960 variant is used on the
+	  platform.
diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
index 0a543eb..96bcb66 100644
--- a/drivers/gpu/drm/msm/Makefile
+++ b/drivers/gpu/drm/msm/Makefile
@@ -62,6 +62,7 @@ msm-$(CONFIG_DRM_MSM_DSI) += dsi/dsi.o \
 
 msm-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += dsi/phy/dsi_phy_28nm.o
 msm-$(CONFIG_DRM_MSM_DSI_20NM_PHY) += dsi/phy/dsi_phy_20nm.o
+msm-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += dsi/phy/dsi_phy_28nm_8960.o
 
 ifeq ($(CONFIG_DRM_MSM_DSI_PLL),y)
 msm-y += dsi/pll/dsi_pll.o
diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h
index 5f5a373..8140e8b 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.h
+++ b/drivers/gpu/drm/msm/dsi/dsi.h
@@ -31,6 +31,7 @@ enum msm_dsi_phy_type {
 	MSM_DSI_PHY_28NM_HPM,
 	MSM_DSI_PHY_28NM_LP,
 	MSM_DSI_PHY_20NM,
+	MSM_DSI_PHY_28NM_8960,
 	MSM_DSI_PHY_MAX
 };
 
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index 401ff58..d54e450 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -277,6 +277,10 @@ static const struct of_device_id dsi_phy_dt_match[] = {
 	{ .compatible = "qcom,dsi-phy-20nm",
 	  .data = &dsi_phy_20nm_cfgs },
 #endif
+#ifdef CONFIG_DRM_MSM_DSI_28NM_8960_PHY
+	{ .compatible = "qcom,dsi-phy-28nm-8960",
+	  .data = &dsi_phy_28nm_8960_cfgs },
+#endif
 	{}
 };
 
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
index 0456b25..0d54ed0 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
@@ -43,6 +43,7 @@ struct msm_dsi_phy_cfg {
 extern const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs;
 
 struct msm_dsi_dphy_timing {
 	u32 clk_pre;
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
new file mode 100644
index 0000000..197b039
--- /dev/null
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
@@ -0,0 +1,195 @@
+/*
+ * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "dsi_phy.h"
+#include "dsi.xml.h"
+
+static void dsi_28nm_dphy_set_timing(struct msm_dsi_phy *phy,
+		struct msm_dsi_dphy_timing *timing)
+{
+	void __iomem *base = phy->base;
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_0,
+		DSI_28nm_8960_PHY_TIMING_CTRL_0_CLK_ZERO(timing->clk_zero));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_1,
+		DSI_28nm_8960_PHY_TIMING_CTRL_1_CLK_TRAIL(timing->clk_trail));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_2,
+		DSI_28nm_8960_PHY_TIMING_CTRL_2_CLK_PREPARE(timing->clk_prepare));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_3, 0x0);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_4,
+		DSI_28nm_8960_PHY_TIMING_CTRL_4_HS_EXIT(timing->hs_exit));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_5,
+		DSI_28nm_8960_PHY_TIMING_CTRL_5_HS_ZERO(timing->hs_zero));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_6,
+		DSI_28nm_8960_PHY_TIMING_CTRL_6_HS_PREPARE(timing->hs_prepare));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_7,
+		DSI_28nm_8960_PHY_TIMING_CTRL_7_HS_TRAIL(timing->hs_trail));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_8,
+		DSI_28nm_8960_PHY_TIMING_CTRL_8_HS_RQST(timing->hs_rqst));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_9,
+		DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_GO(timing->ta_go) |
+		DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_SURE(timing->ta_sure));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_10,
+		DSI_28nm_8960_PHY_TIMING_CTRL_10_TA_GET(timing->ta_get));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_11,
+		DSI_28nm_8960_PHY_TIMING_CTRL_11_TRIG3_CMD(0));
+}
+
+static void dsi_28nm_phy_regulator_init(struct msm_dsi_phy *phy)
+{
+	void __iomem *base = phy->reg_base;
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_0, 0x3);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_1, 1);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_2, 1);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_3, 0);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_4,
+		0x100);
+}
+
+static void dsi_28nm_phy_regulator_ctrl(struct msm_dsi_phy *phy)
+{
+	void __iomem *base = phy->reg_base;
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_0, 0x3);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_1, 0xa);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_2, 0x4);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_3, 0x0);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_4, 0x20);
+}
+
+static void dsi_28nm_phy_calibration(struct msm_dsi_phy *phy)
+{
+	void __iomem *base = phy->reg_base;
+	u32 status;
+	int i = 5000;
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CAL_PWR_CFG,
+			0x3);
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_CAL_SW_CFG_2, 0x0);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_1, 0x5a);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_3, 0x10);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_4, 0x1);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_0, 0x1);
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_TRIGGER, 0x1);
+	usleep_range(5000, 6000);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_TRIGGER, 0x0);
+
+	do {
+		status = dsi_phy_read(base +
+				REG_DSI_28nm_8960_PHY_MISC_CAL_STATUS);
+
+		if (!(status & DSI_28nm_8960_PHY_MISC_CAL_STATUS_CAL_BUSY))
+			break;
+
+		udelay(1);
+	} while (--i > 0);
+}
+
+static void dsi_28nm_phy_lane_config(struct msm_dsi_phy *phy)
+{
+	void __iomem *base = phy->base;
+	int i;
+
+	for (i = 0; i < 4; i++) {
+		dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LN_CFG_0(i), 0x80);
+		dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LN_CFG_1(i), 0x45);
+		dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LN_CFG_2(i), 0x00);
+		dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LN_TEST_DATAPATH(i),
+			0x00);
+		dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LN_TEST_STR_0(i),
+			0x01);
+		dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LN_TEST_STR_1(i),
+			0x66);
+	}
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LNCK_CFG_0, 0x40);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LNCK_CFG_1, 0x67);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LNCK_CFG_2, 0x0);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LNCK_TEST_DATAPATH, 0x0);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LNCK_TEST_STR0, 0x1);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LNCK_TEST_STR1, 0x88);
+}
+
+static int dsi_28nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
+		const unsigned long bit_rate, const unsigned long esc_rate)
+{
+	struct msm_dsi_dphy_timing *timing = &phy->timing;
+	void __iomem *base = phy->base;
+
+	DBG("");
+
+	if (msm_dsi_dphy_timing_calc(timing, bit_rate, esc_rate)) {
+		dev_err(&phy->pdev->dev,
+			"%s: D-PHY timing calculation failed\n", __func__);
+		return -EINVAL;
+	}
+
+	dsi_28nm_phy_regulator_init(phy);
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LDO_CTRL, 0x04);
+
+	/* strength control */
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_STRENGTH_0, 0xff);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_STRENGTH_1, 0x00);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_STRENGTH_2, 0x06);
+
+	/* phy ctrl */
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_CTRL_0, 0x5f);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_CTRL_1, 0x00);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_CTRL_2, 0x00);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_CTRL_3, 0x10);
+
+	dsi_28nm_phy_regulator_ctrl(phy);
+
+	dsi_28nm_phy_calibration(phy);
+
+	dsi_28nm_phy_lane_config(phy);
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_BIST_CTRL_4, 0x0f);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_BIST_CTRL_1, 0x03);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_BIST_CTRL_0, 0x03);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_BIST_CTRL_4, 0x0);
+
+	dsi_28nm_dphy_set_timing(phy, timing);
+
+	return 0;
+}
+
+static void dsi_28nm_phy_disable(struct msm_dsi_phy *phy)
+{
+	dsi_phy_write(phy->base + REG_DSI_28nm_8960_PHY_CTRL_0, 0x0);
+
+	/*
+	 * Wait for the registers writes to complete in order to
+	 * ensure that the phy is completely disabled
+	 */
+	wmb();
+}
+
+const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs = {
+	.type = MSM_DSI_PHY_28NM_8960,
+	.src_pll_truthtable = { {true, true}, {false, true} },
+	.reg_cfg = {
+		.num = 1,
+		.regs = {
+			{"vddio", 1800000, 1800000, 100000, 100},
+		},
+	},
+	.ops = {
+		.enable = dsi_28nm_phy_enable,
+		.disable = dsi_28nm_phy_disable,
+	},
+};
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 03/12] drm/msm/dsi: Add DSI PLL for 28nm 8960 PHY

[Archit Taneja]

Add DSI PLL common clock framework clocks for 8960 PHY.

The PLL here is different from the ones found in B family msm chips. As
before, the DSI provides two clocks to the outside world. dsixpll and
dsixpllbyte (x = 1, 2). dsixpll is a regular clock divider, but
dsixpllbyte is modelled as a custom clock divider.

dsixpllbyte is the starting point of the PLL configuration. It is the
one that sets up the VCO clock rate. We need the VCO clock rate in the
form: F * byteclk, where F is a multiplication factor that varies on
the byte clock the DSI driver is trying to set. We use the custom
clk_ops for dsixpllbyte to ensure that the parent (VCO) is set at this
rate.

An additional divider (POSTDIV1) generates the bitclk. Since bit clock
can be derived from byteclock, we calculate it internally, and don't
expose it as a clock.

Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/Makefile                    |   1 +
 drivers/gpu/drm/msm/dsi/pll/dsi_pll.c           |   3 +
 drivers/gpu/drm/msm/dsi/pll/dsi_pll.h           |  10 +
 drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c | 529 ++++++++++++++++++++++++
 4 files changed, 543 insertions(+)
 create mode 100644 drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c

diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
index 96bcb66..93cc042 100644
--- a/drivers/gpu/drm/msm/Makefile
+++ b/drivers/gpu/drm/msm/Makefile
@@ -67,6 +67,7 @@ msm-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += dsi/phy/dsi_phy_28nm_8960.o
 ifeq ($(CONFIG_DRM_MSM_DSI_PLL),y)
 msm-y += dsi/pll/dsi_pll.o
 msm-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += dsi/pll/dsi_pll_28nm.o
+msm-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += dsi/pll/dsi_pll_28nm_8960.o
 endif
 
 obj-$(CONFIG_DRM_MSM)	+= msm.o
diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c
index 5104fc9..5cd438f 100644
--- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c
+++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c
@@ -151,6 +151,9 @@ struct msm_dsi_pll *msm_dsi_pll_init(struct platform_device *pdev,
 	case MSM_DSI_PHY_28NM_LP:
 		pll = msm_dsi_pll_28nm_init(pdev, type, id);
 		break;
+	case MSM_DSI_PHY_28NM_8960:
+		pll = msm_dsi_pll_28nm_8960_init(pdev, id);
+		break;
 	default:
 		pll = ERR_PTR(-ENXIO);
 		break;
diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h
index 063caa2..80b6038 100644
--- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h
+++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h
@@ -93,6 +93,16 @@ static inline struct msm_dsi_pll *msm_dsi_pll_28nm_init(
 	return ERR_PTR(-ENODEV);
 }
 #endif
+#ifdef CONFIG_DRM_MSM_DSI_28NM_8960_PHY
+struct msm_dsi_pll *msm_dsi_pll_28nm_8960_init(struct platform_device *pdev,
+					       int id);
+#else
+struct msm_dsi_pll *msm_dsi_pll_28nm_8960_init(struct platform_device *pdev,
+					       int id)
+{
+	return ERR_PTR(-ENODEV);
+}
+#endif
 
 #endif /* __DSI_PLL_H__ */
 
diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c
new file mode 100644
index 0000000..e71b4ee
--- /dev/null
+++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c
@@ -0,0 +1,529 @@
+/*
+ * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+
+#include "dsi_pll.h"
+#include "dsi.xml.h"
+
+/*
+ * DSI PLL 28nm (8960/A family) - clock diagram (eg: DSI1):
+ *
+ *
+ *                        +------+
+ *  dsi1vco_clk ----o-----| DIV1 |---dsi1pllbit (not exposed as clock)
+ *  F * byte_clk    |     +------+
+ *                  | bit clock divider (F / 8)
+ *                  |
+ *                  |     +------+
+ *                  o-----| DIV2 |---dsi0pllbyte---o---> To byte RCG
+ *                  |     +------+                 | (sets parent rate)
+ *                  | byte clock divider (F)       |
+ *                  |                              |
+ *                  |                              o---> To esc RCG
+ *                  |                                (doesn't set parent rate)
+ *                  |
+ *                  |     +------+
+ *                  o-----| DIV3 |----dsi0pll------o---> To dsi RCG
+ *                        +------+                 | (sets parent rate)
+ *                  dsi clock divider (F * magic)  |
+ *                                                 |
+ *                                                 o---> To pixel rcg
+ *                                                  (doesn't set parent rate)
+ */
+
+#define POLL_MAX_READS		8000
+#define POLL_TIMEOUT_US		1
+
+#define NUM_PROVIDED_CLKS	2
+
+#define VCO_REF_CLK_RATE	27000000
+#define VCO_MIN_RATE		600000000
+#define VCO_MAX_RATE		1200000000
+
+#define DSI_BYTE_PLL_CLK	0
+#define DSI_PIXEL_PLL_CLK	1
+
+#define VCO_PREF_DIV_RATIO	27
+
+struct pll_28nm_cached_state {
+	unsigned long vco_rate;
+	u8 postdiv3;
+	u8 postdiv2;
+	u8 postdiv1;
+};
+
+struct clk_bytediv {
+	struct clk_hw hw;
+	void __iomem *reg;
+};
+
+struct dsi_pll_28nm {
+	struct msm_dsi_pll base;
+
+	int id;
+	struct platform_device *pdev;
+	void __iomem *mmio;
+
+	/* custom byte clock divider */
+	struct clk_bytediv *bytediv;
+
+	/* private clocks: */
+	struct clk *clks[NUM_DSI_CLOCKS_MAX];
+	u32 num_clks;
+
+	/* clock-provider: */
+	struct clk *provided_clks[NUM_PROVIDED_CLKS];
+	struct clk_onecell_data clk_data;
+
+	struct pll_28nm_cached_state cached_state;
+};
+
+#define to_pll_28nm(x)	container_of(x, struct dsi_pll_28nm, base)
+
+static bool pll_28nm_poll_for_ready(struct dsi_pll_28nm *pll_28nm,
+				    u32 nb_tries, u32 timeout_us)
+{
+	bool pll_locked = false;
+	u32 val;
+
+	while (nb_tries--) {
+		val = pll_read(pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_RDY);
+		pll_locked = !!(val & DSI_28nm_8960_PHY_PLL_RDY_PLL_RDY);
+
+		if (pll_locked)
+			break;
+
+		udelay(timeout_us);
+	}
+	DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* ");
+
+	return pll_locked;
+}
+
+/*
+ * Clock Callbacks
+ */
+static int dsi_pll_28nm_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+				     unsigned long parent_rate)
+{
+	struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+	void __iomem *base = pll_28nm->mmio;
+	u32 val, temp, fb_divider;
+
+	DBG("rate=%lu, parent's=%lu", rate, parent_rate);
+
+	temp = rate / 10;
+	val = VCO_REF_CLK_RATE / 10;
+	fb_divider = (temp * VCO_PREF_DIV_RATIO) / val;
+	fb_divider = fb_divider / 2 - 1;
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_1,
+			fb_divider & 0xff);
+
+	val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2);
+
+	val |= (fb_divider >> 8) & 0x07;
+
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2,
+			val);
+
+	val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3);
+
+	val |= (VCO_PREF_DIV_RATIO - 1) & 0x3f;
+
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3,
+			val);
+
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_6,
+			0xf);
+
+	val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8);
+	val |= 0x7 << 4;
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8,
+			val);
+
+	return 0;
+}
+
+static int dsi_pll_28nm_clk_is_enabled(struct clk_hw *hw)
+{
+	struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+
+	return pll_28nm_poll_for_ready(pll_28nm, POLL_MAX_READS,
+					POLL_TIMEOUT_US);
+}
+
+static unsigned long dsi_pll_28nm_clk_recalc_rate(struct clk_hw *hw,
+						  unsigned long parent_rate)
+{
+	struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+	void __iomem *base = pll_28nm->mmio;
+	unsigned long vco_rate;
+	u32 status, fb_divider, temp, ref_divider;
+
+	VERB("parent_rate=%lu", parent_rate);
+
+	status = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_0);
+
+	if (status & DSI_28nm_8960_PHY_PLL_CTRL_0_ENABLE) {
+		fb_divider = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_1);
+		fb_divider &= 0xff;
+		temp = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2) & 0x07;
+		fb_divider = (temp << 8) | fb_divider;
+		fb_divider += 1;
+
+		ref_divider = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3);
+		ref_divider &= 0x3f;
+		ref_divider += 1;
+
+		/* multiply by 2 */
+		vco_rate = (parent_rate / ref_divider) * fb_divider * 2;
+	} else {
+		vco_rate = 0;
+	}
+
+	DBG("returning vco rate = %lu", vco_rate);
+
+	return vco_rate;
+}
+
+static const struct clk_ops clk_ops_dsi_pll_28nm_vco = {
+	.round_rate = msm_dsi_pll_helper_clk_round_rate,
+	.set_rate = dsi_pll_28nm_clk_set_rate,
+	.recalc_rate = dsi_pll_28nm_clk_recalc_rate,
+	.prepare = msm_dsi_pll_helper_clk_prepare,
+	.unprepare = msm_dsi_pll_helper_clk_unprepare,
+	.is_enabled = dsi_pll_28nm_clk_is_enabled,
+};
+
+/*
+ * Custom byte clock divier clk_ops
+ *
+ * This clock is the entry point to configuring the PLL. The user (dsi host)
+ * will set this clock's rate to the desired byte clock rate. The VCO lock
+ * frequency is a multiple of the byte clock rate. The multiplication factor
+ * (shown as F in the diagram above) is a function of the byte clock rate.
+ *
+ * This custom divider clock ensures that its parent (VCO) is set to the
+ * desired rate, and that the byte clock postdivider (POSTDIV2) is configured
+ * accordingly
+ */
+#define to_clk_bytediv(_hw) container_of(_hw, struct clk_bytediv, hw)
+
+static unsigned long clk_bytediv_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_bytediv *bytediv = to_clk_bytediv(hw);
+	unsigned int div;
+
+	div = pll_read(bytediv->reg) & 0xff;
+
+	return parent_rate / (div + 1);
+}
+
+/* find multiplication factor(wrt byte clock) at which the VCO should be set */
+static unsigned int get_vco_mul_factor(unsigned long byte_clk_rate)
+{
+	unsigned long bit_mhz;
+
+	/* convert to bit clock in Mhz */
+	bit_mhz = (byte_clk_rate * 8) / 1000000;
+
+	if (bit_mhz < 125)
+		return 64;
+	else if (bit_mhz < 250)
+		return 32;
+	else if (bit_mhz < 600)
+		return 16;
+	else
+		return 8;
+}
+
+static long clk_bytediv_round_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long *prate)
+{
+	unsigned long best_parent;
+	unsigned int factor;
+
+	factor = get_vco_mul_factor(rate);
+
+	best_parent = rate * factor;
+	*prate = clk_hw_round_rate(clk_hw_get_parent(hw), best_parent);
+
+	return *prate / factor;
+}
+
+static int clk_bytediv_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct clk_bytediv *bytediv = to_clk_bytediv(hw);
+	u32 val;
+	unsigned int factor;
+
+	factor = get_vco_mul_factor(rate);
+
+	val = pll_read(bytediv->reg);
+	val |= (factor - 1) & 0xff;
+	pll_write(bytediv->reg, val);
+
+	return 0;
+}
+
+/* Our special byte clock divider ops */
+static const struct clk_ops clk_bytediv_ops = {
+	.round_rate = clk_bytediv_round_rate,
+	.set_rate = clk_bytediv_set_rate,
+	.recalc_rate = clk_bytediv_recalc_rate,
+};
+
+/*
+ * PLL Callbacks
+ */
+static int dsi_pll_28nm_enable_seq(struct msm_dsi_pll *pll)
+{
+	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+	struct device *dev = &pll_28nm->pdev->dev;
+	void __iomem *base = pll_28nm->mmio;
+	bool locked;
+	unsigned int bit_div, byte_div;
+	u32 max_reads = 1000, timeout_us = 100;
+	u32 val;
+
+	DBG("id=%d", pll_28nm->id);
+
+	/*
+	 * before enabling the PLL, configure the bit clock divider since we
+	 * don't expose it as a clock to the outside world
+	 * 1: read back the byte clock divider that should aready be set
+	 * 2: divide by 8 to get bit clock divider
+	 * 3: write it to POSTDIV1
+	 */
+	val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9);
+	byte_div = val + 1;
+	bit_div = byte_div / 8;
+
+	val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8);
+	val &= ~0xf;
+	val |= (bit_div - 1);
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8, val);
+
+	/* enable the PLL */
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_0,
+			DSI_28nm_8960_PHY_PLL_CTRL_0_ENABLE);
+
+	locked = pll_28nm_poll_for_ready(pll_28nm, max_reads, timeout_us);
+
+	if (unlikely(!locked))
+		dev_err(dev, "DSI PLL lock failed\n");
+	else
+		DBG("DSI PLL lock success");
+
+	return locked ? 0 : -EINVAL;
+}
+
+static void dsi_pll_28nm_disable_seq(struct msm_dsi_pll *pll)
+{
+	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+
+	DBG("id=%d", pll_28nm->id);
+	pll_write(pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_CTRL_0, 0x00);
+}
+
+static void dsi_pll_28nm_save_state(struct msm_dsi_pll *pll)
+{
+	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+	struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state;
+	void __iomem *base = pll_28nm->mmio;
+
+	cached_state->postdiv3 =
+			pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_10);
+	cached_state->postdiv2 =
+			pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9);
+	cached_state->postdiv1 =
+			pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8);
+
+	cached_state->vco_rate = clk_hw_get_rate(&pll->clk_hw);
+}
+
+static int dsi_pll_28nm_restore_state(struct msm_dsi_pll *pll)
+{
+	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+	struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state;
+	void __iomem *base = pll_28nm->mmio;
+	int ret;
+
+	ret = dsi_pll_28nm_clk_set_rate(&pll->clk_hw,
+					cached_state->vco_rate, 0);
+	if (ret) {
+		dev_err(&pll_28nm->pdev->dev,
+			"restore vco rate failed. ret=%d\n", ret);
+		return ret;
+	}
+
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_10,
+			cached_state->postdiv3);
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9,
+			cached_state->postdiv2);
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8,
+			cached_state->postdiv1);
+
+	return 0;
+}
+
+static int dsi_pll_28nm_get_provider(struct msm_dsi_pll *pll,
+				struct clk **byte_clk_provider,
+				struct clk **pixel_clk_provider)
+{
+	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+
+	if (byte_clk_provider)
+		*byte_clk_provider = pll_28nm->provided_clks[DSI_BYTE_PLL_CLK];
+	if (pixel_clk_provider)
+		*pixel_clk_provider =
+				pll_28nm->provided_clks[DSI_PIXEL_PLL_CLK];
+
+	return 0;
+}
+
+static void dsi_pll_28nm_destroy(struct msm_dsi_pll *pll)
+{
+	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+	int i;
+
+	msm_dsi_pll_helper_unregister_clks(pll_28nm->pdev,
+					pll_28nm->clks, pll_28nm->num_clks);
+
+	for (i = 0; i < NUM_PROVIDED_CLKS; i++)
+		pll_28nm->provided_clks[i] = NULL;
+
+	pll_28nm->num_clks = 0;
+	pll_28nm->clk_data.clks = NULL;
+	pll_28nm->clk_data.clk_num = 0;
+}
+
+static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm)
+{
+	char clk_name[32], parent[32], vco_name[32];
+	struct clk_init_data vco_init = {
+		.parent_names = (const char *[]){ "pxo" },
+		.num_parents = 1,
+		.name = vco_name,
+		.ops = &clk_ops_dsi_pll_28nm_vco,
+	};
+	struct device *dev = &pll_28nm->pdev->dev;
+	struct clk **clks = pll_28nm->clks;
+	struct clk **provided_clks = pll_28nm->provided_clks;
+	struct clk_bytediv *bytediv;
+	struct clk_init_data bytediv_init;
+	int ret, num = 0;
+
+	DBG("%d", pll_28nm->id);
+
+	bytediv = devm_kzalloc(dev, sizeof(*bytediv), GFP_KERNEL);
+	if (!bytediv)
+		return -ENOMEM;
+
+	pll_28nm->bytediv = bytediv;
+
+	snprintf(vco_name, 32, "dsi%dvco_clk", pll_28nm->id);
+	pll_28nm->base.clk_hw.init = &vco_init;
+
+	clks[num++] = clk_register(dev, &pll_28nm->base.clk_hw);
+
+	/* prepare and register bytediv */
+	bytediv->hw.init = &bytediv_init;
+	bytediv->reg = pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_CTRL_9;
+
+	snprintf(parent, 32, "dsi%dvco_clk", pll_28nm->id);
+	snprintf(clk_name, 32, "dsi%dpllbyte", pll_28nm->id);
+
+	bytediv_init.name = clk_name;
+	bytediv_init.ops = &clk_bytediv_ops;
+	bytediv_init.flags = CLK_SET_RATE_PARENT;
+	bytediv_init.parent_names = (const char *[]) { parent };
+	bytediv_init.num_parents = 1;
+
+	/* DIV2 */
+	clks[num++] = provided_clks[DSI_BYTE_PLL_CLK] =
+			clk_register(dev, &bytediv->hw);
+
+	snprintf(clk_name, 32, "dsi%dpll", pll_28nm->id);
+	/* DIV3 */
+	clks[num++] = provided_clks[DSI_PIXEL_PLL_CLK] =
+			clk_register_divider(dev, clk_name,
+				parent, 0, pll_28nm->mmio +
+				REG_DSI_28nm_8960_PHY_PLL_CTRL_10,
+				0, 8, 0, NULL);
+
+	pll_28nm->num_clks = num;
+
+	pll_28nm->clk_data.clk_num = NUM_PROVIDED_CLKS;
+	pll_28nm->clk_data.clks = provided_clks;
+
+	ret = of_clk_add_provider(dev->of_node,
+			of_clk_src_onecell_get, &pll_28nm->clk_data);
+	if (ret) {
+		dev_err(dev, "failed to register clk provider: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+struct msm_dsi_pll *msm_dsi_pll_28nm_8960_init(struct platform_device *pdev,
+					       int id)
+{
+	struct dsi_pll_28nm *pll_28nm;
+	struct msm_dsi_pll *pll;
+	int ret;
+
+	if (!pdev)
+		return ERR_PTR(-ENODEV);
+
+	pll_28nm = devm_kzalloc(&pdev->dev, sizeof(*pll_28nm), GFP_KERNEL);
+	if (!pll_28nm)
+		return ERR_PTR(-ENOMEM);
+
+	pll_28nm->pdev = pdev;
+	pll_28nm->id = id + 1;
+
+	pll_28nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL");
+	if (IS_ERR_OR_NULL(pll_28nm->mmio)) {
+		dev_err(&pdev->dev, "%s: failed to map pll base\n", __func__);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	pll = &pll_28nm->base;
+	pll->min_rate = VCO_MIN_RATE;
+	pll->max_rate = VCO_MAX_RATE;
+	pll->get_provider = dsi_pll_28nm_get_provider;
+	pll->destroy = dsi_pll_28nm_destroy;
+	pll->disable_seq = dsi_pll_28nm_disable_seq;
+	pll->save_state = dsi_pll_28nm_save_state;
+	pll->restore_state = dsi_pll_28nm_restore_state;
+
+	pll->en_seq_cnt = 1;
+	pll->enable_seqs[0] = dsi_pll_28nm_enable_seq;
+
+	ret = pll_28nm_register(pll_28nm);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register PLL: %d\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	return pll;
+}
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 04/12] drm/msm/dsi: Use a better way to figure out DSI version

[Archit Taneja]

The current version checking mechanism works fine for DSI6G blocks. It
doesn't work so well for older generation DSIv2 blocks.

The initial read of REG_DSI_6G_HW_VERSION(offset 0x0) would result in a
read of REG_DSI_CTRL for DSIv2. This register won't necessarily be 0 on
DSIv2. It can be non zero if DSI was previously initialized by the
bootloader.

Instead of reading offset 0x0, we now read offset 0x1f0. For DSIv2, this
register is DSI_VERSION, and is bound to be non-zero. On DSI6G, this
register(offset 0x1f0) is SCRATCH_REGISTER_0, which no one ever seems to
touch, and from all register dumps I'vc seen, holds 0 all the time.

Modify dsi_get_version to read REG_DSI_VERSION to determine whether we
are DSI6G or DSIv2.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 8d82973f..f26e8be 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -33,17 +33,24 @@
 static int dsi_get_version(const void __iomem *base, u32 *major, u32 *minor)
 {
 	u32 ver;
-	u32 ver_6g;
 
 	if (!major || !minor)
 		return -EINVAL;
 
-	/* From DSI6G(v3), addition of a 6G_HW_VERSION register at offset 0
+	/*
+	 * From DSI6G(v3), addition of a 6G_HW_VERSION register at offset 0
 	 * makes all other registers 4-byte shifted down.
+	 *
+	 * In order to identify between DSI6G(v3) and beyond, and DSIv2 and
+	 * older, we read the DSI_VERSION register without any shift(offset
+	 * 0x1f0). In the case of DSIv2, this hast to be a non-zero value. In
+	 * the case of DSI6G, this has to be zero (the offset points to a
+	 * scratch register which we never touch)
 	 */
-	ver_6g = msm_readl(base + REG_DSI_6G_HW_VERSION);
-	if (ver_6g == 0) {
-		ver = msm_readl(base + REG_DSI_VERSION);
+
+	ver = msm_readl(base + REG_DSI_VERSION);
+	if (ver) {
+		/* older dsi host, there is no register shift */
 		ver = FIELD(ver, DSI_VERSION_MAJOR);
 		if (ver <= MSM_DSI_VER_MAJOR_V2) {
 			/* old versions */
@@ -54,12 +61,17 @@ static int dsi_get_version(const void __iomem *base, u32 *major, u32 *minor)
 			return -EINVAL;
 		}
 	} else {
+		/*
+		 * newer host, offset 0 has 6G_HW_VERSION, the rest of the
+		 * registers are shifted down, read DSI_VERSION again with
+		 * the shifted offset
+		 */
 		ver = msm_readl(base + DSI_6G_REG_SHIFT + REG_DSI_VERSION);
 		ver = FIELD(ver, DSI_VERSION_MAJOR);
 		if (ver == MSM_DSI_VER_MAJOR_6G) {
 			/* 6G version */
 			*major = ver;
-			*minor = ver_6g;
+			*minor = msm_readl(base + REG_DSI_6G_HW_VERSION);
 			return 0;
 		} else {
 			return -EINVAL;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

[PATCH 05/12] drm/msm/dsi: Delay dsi_clk_init

[Archit Taneja]

Initialize clocks only after we get the DSI host version. This will allow
us to get clocks using a pre-defined list based on the DSI major/minor
version of the host. This is required since clock requirements of
different major DSI revisions(v2 vs 6g) aren't the same.

Modify dsi_get_version to get the interface clock, and then put it after
it is used.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 32 ++++++++++++++++++++++----------
 1 file changed, 22 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index f26e8be..12ac3bc3 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -177,21 +177,31 @@ static const struct msm_dsi_cfg_handler *dsi_get_config(
 						struct msm_dsi_host *msm_host)
 {
 	const struct msm_dsi_cfg_handler *cfg_hnd = NULL;
+	struct device *dev = &msm_host->pdev->dev;
 	struct regulator *gdsc_reg;
+	struct clk *ahb_clk;
 	int ret;
 	u32 major = 0, minor = 0;
 
-	gdsc_reg = regulator_get(&msm_host->pdev->dev, "gdsc");
+	gdsc_reg = regulator_get(dev, "gdsc");
 	if (IS_ERR(gdsc_reg)) {
 		pr_err("%s: cannot get gdsc\n", __func__);
 		goto exit;
 	}
+
+	ahb_clk = clk_get(dev, "iface_clk");
+	if (IS_ERR(ahb_clk)) {
+		pr_err("%s: cannot get interface clock\n", __func__);
+		goto put_gdsc;
+	}
+
 	ret = regulator_enable(gdsc_reg);
 	if (ret) {
 		pr_err("%s: unable to enable gdsc\n", __func__);
-		goto put_gdsc;
+		goto put_clk;
 	}
-	ret = clk_prepare_enable(msm_host->ahb_clk);
+
+	ret = clk_prepare_enable(ahb_clk);
 	if (ret) {
 		pr_err("%s: unable to enable ahb_clk\n", __func__);
 		goto disable_gdsc;
@@ -208,9 +218,11 @@ static const struct msm_dsi_cfg_handler *dsi_get_config(
 	DBG("%s: Version %x:%x\n", __func__, major, minor);
 
 disable_clks:
-	clk_disable_unprepare(msm_host->ahb_clk);
+	clk_disable_unprepare(ahb_clk);
 disable_gdsc:
 	regulator_disable(gdsc_reg);
+put_clk:
+	clk_put(ahb_clk);
 put_gdsc:
 	regulator_put(gdsc_reg);
 exit:
@@ -1420,12 +1432,6 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi)
 		goto fail;
 	}
 
-	ret = dsi_clk_init(msm_host);
-	if (ret) {
-		pr_err("%s: unable to initialize dsi clks\n", __func__);
-		goto fail;
-	}
-
 	msm_host->ctrl_base = msm_ioremap(pdev, "dsi_ctrl", "DSI CTRL");
 	if (IS_ERR(msm_host->ctrl_base)) {
 		pr_err("%s: unable to map Dsi ctrl base\n", __func__);
@@ -1449,6 +1455,12 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi)
 		goto fail;
 	}
 
+	ret = dsi_clk_init(msm_host);
+	if (ret) {
+		pr_err("%s: unable to initialize dsi clks\n", __func__);
+		goto fail;
+	}
+
 	msm_host->rx_buf = devm_kzalloc(&pdev->dev, SZ_4K, GFP_KERNEL);
 	if (!msm_host->rx_buf) {
 		pr_err("%s: alloc rx temp buf failed\n", __func__);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

[PATCH 06/12] drm/msm/dsi: Parse bus clocks from a list

[Archit Taneja]

DSI bus clocks seem to vary between different DSI host versions, and the
SOC to which they belong. Even the enable/disable sequence varies.

Provide a list of bus clock names in dsi_cfg. The driver will use this to
retrieve the clocks, and enable/disable them.

Add bus clock lists for DSI6G, and DSI for MSM8916(this is DSI6G too, but
there is no MMSS_CC specific clock since there is no MMSS clock controller
on 8916).

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/dsi.h      |   1 +
 drivers/gpu/drm/msm/dsi/dsi_cfg.c  |  16 +++++-
 drivers/gpu/drm/msm/dsi/dsi_cfg.h  |   2 +
 drivers/gpu/drm/msm/dsi/dsi_host.c | 107 ++++++++++++-------------------------
 4 files changed, 53 insertions(+), 73 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h
index 8140e8b..7336b55 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.h
+++ b/drivers/gpu/drm/msm/dsi/dsi.h
@@ -36,6 +36,7 @@ enum msm_dsi_phy_type {
 };
 
 #define DSI_DEV_REGULATOR_MAX	8
+#define DSI_BUS_CLK_MAX		4
 
 /* Regulators for DSI devices */
 struct dsi_reg_entry {
diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.c b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
index 5872d5e..c40044f 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
@@ -18,6 +18,10 @@ static const struct msm_dsi_config dsi_v2_cfg = {
 	.io_offset = 0,
 };
 
+static const char * const dsi_6g_bus_clk_names[] = {
+	"mdp_core_clk", "iface_clk", "bus_clk", "core_mmss_clk",
+};
+
 static const struct msm_dsi_config msm8974_apq8084_dsi_cfg = {
 	.io_offset = DSI_6G_REG_SHIFT,
 	.reg_cfg = {
@@ -29,6 +33,12 @@ static const struct msm_dsi_config msm8974_apq8084_dsi_cfg = {
 			{"vddio", 1800000, 1800000, 100000, 100},
 		},
 	},
+	.bus_clk_names = dsi_6g_bus_clk_names,
+	.num_bus_clks = ARRAY_SIZE(dsi_6g_bus_clk_names),
+};
+
+static const char * const dsi_8916_bus_clk_names[] = {
+	"mdp_core_clk", "iface_clk", "bus_clk",
 };
 
 static const struct msm_dsi_config msm8916_dsi_cfg = {
@@ -42,6 +52,8 @@ static const struct msm_dsi_config msm8916_dsi_cfg = {
 			{"vddio", 1800000, 1800000, 100000, 100},
 		},
 	},
+	.bus_clk_names = dsi_8916_bus_clk_names,
+	.num_bus_clks = ARRAY_SIZE(dsi_8916_bus_clk_names),
 };
 
 static const struct msm_dsi_config msm8994_dsi_cfg = {
@@ -57,7 +69,9 @@ static const struct msm_dsi_config msm8994_dsi_cfg = {
 			{"lab_reg", -1, -1, -1, -1},
 			{"ibb_reg", -1, -1, -1, -1},
 		},
-	}
+	},
+	.bus_clk_names = dsi_6g_bus_clk_names,
+	.num_bus_clks = ARRAY_SIZE(dsi_6g_bus_clk_names),
 };
 
 static const struct msm_dsi_cfg_handler dsi_cfg_handlers[] = {
diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.h b/drivers/gpu/drm/msm/dsi/dsi_cfg.h
index 4cf8872..5a36836 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.h
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.h
@@ -30,6 +30,8 @@
 struct msm_dsi_config {
 	u32 io_offset;
 	struct dsi_reg_config reg_cfg;
+	const char * const *bus_clk_names;
+	const int num_bus_clks;
 };
 
 struct msm_dsi_cfg_handler {
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 12ac3bc3..008726f 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -103,10 +103,9 @@ struct msm_dsi_host {
 
 	void __iomem *ctrl_base;
 	struct regulator_bulk_data supplies[DSI_DEV_REGULATOR_MAX];
-	struct clk *mdp_core_clk;
-	struct clk *ahb_clk;
-	struct clk *axi_clk;
-	struct clk *mmss_misc_ahb_clk;
+
+	struct clk *bus_clks[DSI_BUS_CLK_MAX];
+
 	struct clk *byte_clk;
 	struct clk *esc_clk;
 	struct clk *pixel_clk;
@@ -319,40 +318,22 @@ static int dsi_regulator_init(struct msm_dsi_host *msm_host)
 static int dsi_clk_init(struct msm_dsi_host *msm_host)
 {
 	struct device *dev = &msm_host->pdev->dev;
-	int ret = 0;
-
-	msm_host->mdp_core_clk = devm_clk_get(dev, "mdp_core_clk");
-	if (IS_ERR(msm_host->mdp_core_clk)) {
-		ret = PTR_ERR(msm_host->mdp_core_clk);
-		pr_err("%s: Unable to get mdp core clk. ret=%d\n",
-			__func__, ret);
-		goto exit;
-	}
-
-	msm_host->ahb_clk = devm_clk_get(dev, "iface_clk");
-	if (IS_ERR(msm_host->ahb_clk)) {
-		ret = PTR_ERR(msm_host->ahb_clk);
-		pr_err("%s: Unable to get mdss ahb clk. ret=%d\n",
-			__func__, ret);
-		goto exit;
-	}
-
-	msm_host->axi_clk = devm_clk_get(dev, "bus_clk");
-	if (IS_ERR(msm_host->axi_clk)) {
-		ret = PTR_ERR(msm_host->axi_clk);
-		pr_err("%s: Unable to get axi bus clk. ret=%d\n",
-			__func__, ret);
-		goto exit;
-	}
-
-	msm_host->mmss_misc_ahb_clk = devm_clk_get(dev, "core_mmss_clk");
-	if (IS_ERR(msm_host->mmss_misc_ahb_clk)) {
-		ret = PTR_ERR(msm_host->mmss_misc_ahb_clk);
-		pr_err("%s: Unable to get mmss misc ahb clk. ret=%d\n",
-			__func__, ret);
-		goto exit;
+	const struct msm_dsi_config *cfg = msm_host->cfg_hnd->cfg;
+	int i, ret = 0;
+
+	/* get bus clocks */
+	for (i = 0; i < cfg->num_bus_clks; i++) {
+		msm_host->bus_clks[i] = devm_clk_get(dev,
+						cfg->bus_clk_names[i]);
+		if (IS_ERR(msm_host->bus_clks[i])) {
+			ret = PTR_ERR(msm_host->bus_clks[i]);
+			pr_err("%s: Unable to get %s, ret = %d\n",
+				__func__, cfg->bus_clk_names[i], ret);
+			goto exit;
+		}
 	}
 
+	/* get link and source clocks */
 	msm_host->byte_clk = devm_clk_get(dev, "byte_clk");
 	if (IS_ERR(msm_host->byte_clk)) {
 		ret = PTR_ERR(msm_host->byte_clk);
@@ -402,55 +383,37 @@ exit:
 
 static int dsi_bus_clk_enable(struct msm_dsi_host *msm_host)
 {
-	int ret;
+	const struct msm_dsi_config *cfg = msm_host->cfg_hnd->cfg;
+	int i, ret;
 
 	DBG("id=%d", msm_host->id);
 
-	ret = clk_prepare_enable(msm_host->mdp_core_clk);
-	if (ret) {
-		pr_err("%s: failed to enable mdp_core_clock, %d\n",
-							 __func__, ret);
-		goto core_clk_err;
-	}
-
-	ret = clk_prepare_enable(msm_host->ahb_clk);
-	if (ret) {
-		pr_err("%s: failed to enable ahb clock, %d\n", __func__, ret);
-		goto ahb_clk_err;
-	}
-
-	ret = clk_prepare_enable(msm_host->axi_clk);
-	if (ret) {
-		pr_err("%s: failed to enable ahb clock, %d\n", __func__, ret);
-		goto axi_clk_err;
-	}
-
-	ret = clk_prepare_enable(msm_host->mmss_misc_ahb_clk);
-	if (ret) {
-		pr_err("%s: failed to enable mmss misc ahb clk, %d\n",
-			__func__, ret);
-		goto misc_ahb_clk_err;
+	for (i = 0; i < cfg->num_bus_clks; i++) {
+		ret = clk_prepare_enable(msm_host->bus_clks[i]);
+		if (ret) {
+			pr_err("%s: failed to enable bus clock %d ret %d\n",
+				__func__, i, ret);
+			goto err;
+		}
 	}
 
 	return 0;
+err:
+	for (; i > 0; i--)
+		clk_disable_unprepare(msm_host->bus_clks[i]);
 
-misc_ahb_clk_err:
-	clk_disable_unprepare(msm_host->axi_clk);
-axi_clk_err:
-	clk_disable_unprepare(msm_host->ahb_clk);
-ahb_clk_err:
-	clk_disable_unprepare(msm_host->mdp_core_clk);
-core_clk_err:
 	return ret;
 }
 
 static void dsi_bus_clk_disable(struct msm_dsi_host *msm_host)
 {
+	const struct msm_dsi_config *cfg = msm_host->cfg_hnd->cfg;
+	int i;
+
 	DBG("");
-	clk_disable_unprepare(msm_host->mmss_misc_ahb_clk);
-	clk_disable_unprepare(msm_host->axi_clk);
-	clk_disable_unprepare(msm_host->ahb_clk);
-	clk_disable_unprepare(msm_host->mdp_core_clk);
+
+	for (i = cfg->num_bus_clks - 1; i >= 0; i--)
+		clk_disable_unprepare(msm_host->bus_clks[i]);
 }
 
 static int dsi_link_clk_enable(struct msm_dsi_host *msm_host)
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 07/12] drm/msm/dsi: Set up link clocks for DSIv2

[Archit Taneja]

DSIv2 (DSI on older A family chips) has slightly different link clock
requirements.

First, we have an extra clock called src_clk (with a dedicated RCG).
This is required by the DSI controller to process the pixel data
coming from MDP. It needs to be set at the rate "pclk * bytes_per_pixel".

We also need to explicitly configure esc_clk. On DSI6G chips, we don't
need to set a rate to esc_clk because its RCG is always sourced from
crystal clock (19.2 Mhz in all cases), which is within the escape clock
frequency range in the mipi DSI spec. For chips with DSIv2, the crystal
clock rate may not be within the required range (27Mhz on APQ8064).
Therefore, we derive it from the DSI byte clock. We calculate an esc_clck
rate that is within the mipi spec and also divisible by the byte clock
rate.

When setting rate and enabling the link clocks, we make sure that byte_clk
is configured before esc_clk, and src_clk before pixel_clk. We create two
different link_enable funcs for DSI6G and DSIv2 since the sequences are
different.

We also obtain two extra source clocks (dsi_src_clk and esc_src_clk) and
set their parent to the clocks provided by DSI PLL.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 193 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 188 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 008726f..16c5cfb 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -113,6 +113,14 @@ struct msm_dsi_host {
 	struct clk *pixel_clk_src;
 
 	u32 byte_clk_rate;
+	u32 esc_clk_rate;
+
+	/* DSI v2 specific clocks */
+	struct clk *src_clk;
+	struct clk *esc_clk_src;
+	struct clk *dsi_clk_src;
+
+	u32 src_clk_rate;
 
 	struct gpio_desc *disp_en_gpio;
 	struct gpio_desc *te_gpio;
@@ -318,7 +326,8 @@ static int dsi_regulator_init(struct msm_dsi_host *msm_host)
 static int dsi_clk_init(struct msm_dsi_host *msm_host)
 {
 	struct device *dev = &msm_host->pdev->dev;
-	const struct msm_dsi_config *cfg = msm_host->cfg_hnd->cfg;
+	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
+	const struct msm_dsi_config *cfg = cfg_hnd->cfg;
 	int i, ret = 0;
 
 	/* get bus clocks */
@@ -377,6 +386,34 @@ static int dsi_clk_init(struct msm_dsi_host *msm_host)
 		goto exit;
 	}
 
+	if (cfg_hnd->major == MSM_DSI_VER_MAJOR_V2) {
+		msm_host->src_clk = devm_clk_get(dev, "src_clk");
+		if (IS_ERR(msm_host->src_clk)) {
+			ret = PTR_ERR(msm_host->src_clk);
+			pr_err("%s: can't find dsi_src_clk. ret=%d\n",
+				__func__, ret);
+			msm_host->src_clk = NULL;
+			goto exit;
+		}
+
+		msm_host->esc_clk_src = devm_clk_get(dev, "esc_clk_src");
+		if (IS_ERR(msm_host->esc_clk_src)) {
+			ret = PTR_ERR(msm_host->esc_clk_src);
+			pr_err("%s: can't find esc_clk_src. ret=%d\n",
+				__func__, ret);
+			msm_host->esc_clk_src = NULL;
+			goto exit;
+		}
+
+		msm_host->dsi_clk_src = devm_clk_get(dev, "dsi_clk_src");
+		if (IS_ERR(msm_host->dsi_clk_src)) {
+			ret = PTR_ERR(msm_host->dsi_clk_src);
+			pr_err("%s: can't find dsi_clk_src. ret=%d\n",
+				__func__, ret);
+			msm_host->dsi_clk_src = NULL;
+			goto exit;
+		}
+	}
 exit:
 	return ret;
 }
@@ -416,7 +453,7 @@ static void dsi_bus_clk_disable(struct msm_dsi_host *msm_host)
 		clk_disable_unprepare(msm_host->bus_clks[i]);
 }
 
-static int dsi_link_clk_enable(struct msm_dsi_host *msm_host)
+static int dsi_link_clk_enable_6g(struct msm_dsi_host *msm_host)
 {
 	int ret;
 
@@ -463,11 +500,98 @@ error:
 	return ret;
 }
 
-static void dsi_link_clk_disable(struct msm_dsi_host *msm_host)
+static int dsi_link_clk_enable_v2(struct msm_dsi_host *msm_host)
 {
+	int ret;
+
+	DBG("Set clk rates: pclk=%d, byteclk=%d, esc_clk=%d, dsi_src_clk=%d",
+		msm_host->mode->clock, msm_host->byte_clk_rate,
+		msm_host->esc_clk_rate, msm_host->src_clk_rate);
+
+	ret = clk_set_rate(msm_host->byte_clk, msm_host->byte_clk_rate);
+	if (ret) {
+		pr_err("%s: Failed to set rate byte clk, %d\n", __func__, ret);
+		goto error;
+	}
+
+	ret = clk_set_rate(msm_host->esc_clk, msm_host->esc_clk_rate);
+	if (ret) {
+		pr_err("%s: Failed to set rate esc clk, %d\n", __func__, ret);
+		goto error;
+	}
+
+	ret = clk_set_rate(msm_host->src_clk, msm_host->src_clk_rate);
+	if (ret) {
+		pr_err("%s: Failed to set rate src clk, %d\n", __func__, ret);
+		goto error;
+	}
+
+	ret = clk_set_rate(msm_host->pixel_clk, msm_host->mode->clock * 1000);
+	if (ret) {
+		pr_err("%s: Failed to set rate pixel clk, %d\n", __func__, ret);
+		goto error;
+	}
+
+	ret = clk_prepare_enable(msm_host->byte_clk);
+	if (ret) {
+		pr_err("%s: Failed to enable dsi byte clk\n", __func__);
+		goto error;
+	}
+
+	ret = clk_prepare_enable(msm_host->esc_clk);
+	if (ret) {
+		pr_err("%s: Failed to enable dsi esc clk\n", __func__);
+		goto esc_clk_err;
+	}
+
+	ret = clk_prepare_enable(msm_host->src_clk);
+	if (ret) {
+		pr_err("%s: Failed to enable dsi src clk\n", __func__);
+		goto src_clk_err;
+	}
+
+	ret = clk_prepare_enable(msm_host->pixel_clk);
+	if (ret) {
+		pr_err("%s: Failed to enable dsi pixel clk\n", __func__);
+		goto pixel_clk_err;
+	}
+
+	return 0;
+
+pixel_clk_err:
+	clk_disable_unprepare(msm_host->src_clk);
+src_clk_err:
 	clk_disable_unprepare(msm_host->esc_clk);
-	clk_disable_unprepare(msm_host->pixel_clk);
+esc_clk_err:
 	clk_disable_unprepare(msm_host->byte_clk);
+error:
+	return ret;
+}
+
+static int dsi_link_clk_enable(struct msm_dsi_host *msm_host)
+{
+	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
+
+	if (cfg_hnd->major == MSM_DSI_VER_MAJOR_6G)
+		return dsi_link_clk_enable_6g(msm_host);
+	else
+		return dsi_link_clk_enable_v2(msm_host);
+}
+
+static void dsi_link_clk_disable(struct msm_dsi_host *msm_host)
+{
+	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
+
+	if (cfg_hnd->major == MSM_DSI_VER_MAJOR_6G) {
+		clk_disable_unprepare(msm_host->esc_clk);
+		clk_disable_unprepare(msm_host->pixel_clk);
+		clk_disable_unprepare(msm_host->byte_clk);
+	} else {
+		clk_disable_unprepare(msm_host->pixel_clk);
+		clk_disable_unprepare(msm_host->src_clk);
+		clk_disable_unprepare(msm_host->esc_clk);
+		clk_disable_unprepare(msm_host->byte_clk);
+	}
 }
 
 static int dsi_clk_ctrl(struct msm_dsi_host *msm_host, bool enable)
@@ -502,6 +626,7 @@ unlock_ret:
 static int dsi_calc_clk_rate(struct msm_dsi_host *msm_host)
 {
 	struct drm_display_mode *mode = msm_host->mode;
+	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
 	u8 lanes = msm_host->lanes;
 	u32 bpp = dsi_get_bpp(msm_host->format);
 	u32 pclk_rate;
@@ -521,6 +646,47 @@ static int dsi_calc_clk_rate(struct msm_dsi_host *msm_host)
 
 	DBG("pclk=%d, bclk=%d", pclk_rate, msm_host->byte_clk_rate);
 
+	msm_host->esc_clk_rate = clk_get_rate(msm_host->esc_clk);
+
+	if (cfg_hnd->major == MSM_DSI_VER_MAJOR_V2) {
+		unsigned int esc_mhz, esc_div;
+		unsigned long byte_mhz;
+
+		msm_host->src_clk_rate = (pclk_rate * bpp) / 8;
+
+		/*
+		 * esc clock is byte clock followed by a 4 bit divider,
+		 * we need to find an escape clock frequency within the
+		 * mipi DSI spec range within the maximum divider limit
+		 * We iterate here between an escape clock frequencey
+		 * between 20 Mhz to 5 Mhz and pick up the first one
+		 * that can be supported by our divider
+		 */
+
+		byte_mhz = msm_host->byte_clk_rate / 1000000;
+
+		for (esc_mhz = 20; esc_mhz >= 5; esc_mhz--) {
+			esc_div = DIV_ROUND_UP(byte_mhz, esc_mhz);
+
+			/*
+			 * TODO: Ideally, we shouldn't know what sort of divider
+			 * is available in mmss_cc, we're just assuming that
+			 * it'll always be a 4 bit divider. Need to come up with
+			 * a better way here.
+			 */
+			if (esc_div >= 1 && esc_div <= 16)
+				break;
+		}
+
+		if (esc_mhz < 5)
+			return -EINVAL;
+
+		msm_host->esc_clk_rate = msm_host->byte_clk_rate / esc_div;
+
+		DBG("esc=%d, src=%d", msm_host->esc_clk_rate,
+			msm_host->src_clk_rate);
+	}
+
 	return 0;
 }
 
@@ -1753,6 +1919,7 @@ int msm_dsi_host_set_src_pll(struct mipi_dsi_host *host,
 	struct msm_dsi_pll *src_pll)
 {
 	struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
+	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
 	struct clk *byte_clk_provider, *pixel_clk_provider;
 	int ret;
 
@@ -1778,6 +1945,22 @@ int msm_dsi_host_set_src_pll(struct mipi_dsi_host *host,
 		goto exit;
 	}
 
+	if (cfg_hnd->major == MSM_DSI_VER_MAJOR_V2) {
+		ret = clk_set_parent(msm_host->dsi_clk_src, pixel_clk_provider);
+		if (ret) {
+			pr_err("%s: can't set parent to dsi_clk_src. ret=%d\n",
+				__func__, ret);
+			goto exit;
+		}
+
+		ret = clk_set_parent(msm_host->esc_clk_src, byte_clk_provider);
+		if (ret) {
+			pr_err("%s: can't set parent to esc_clk_src. ret=%d\n",
+				__func__, ret);
+			goto exit;
+		}
+	}
+
 exit:
 	return ret;
 }
@@ -1849,7 +2032,7 @@ int msm_dsi_host_power_on(struct mipi_dsi_host *host)
 	dsi_phy_sw_reset(msm_host);
 	ret = msm_dsi_manager_phy_enable(msm_host->id,
 					msm_host->byte_clk_rate * 8,
-					clk_get_rate(msm_host->esc_clk),
+					msm_host->esc_clk_rate,
 					&clk_pre, &clk_post);
 	dsi_bus_clk_disable(msm_host);
 	if (ret) {
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 08/12] drm/msm/dsi: Add dsi_cfg for APQ8064

[Archit Taneja]

Add a dsi_cfg entry for APQ8064. Since this is the first DSIv2 chip to
be supported, add a list of bus clocks that are required by the DSIv2
block.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/dsi_cfg.c | 19 ++++++++++++++++---
 drivers/gpu/drm/msm/dsi/dsi_cfg.h |  2 ++
 2 files changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.c b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
index c40044f..2a827d8 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
@@ -13,9 +13,22 @@
 
 #include "dsi_cfg.h"
 
-/* DSI v2 has not been supported by now */
-static const struct msm_dsi_config dsi_v2_cfg = {
+static const char * const dsi_v2_bus_clk_names[] = {
+	"core_mmss_clk", "iface_clk", "bus_clk",
+};
+
+static const struct msm_dsi_config apq8064_dsi_cfg = {
 	.io_offset = 0,
+	.reg_cfg = {
+		.num = 3,
+		.regs = {
+			{"vdda", 1200000, 1200000, 100000, 100},
+			{"avdd", 3000000, 3000000, 110000, 100},
+			{"vddio", 1800000, 1800000, 100000, 100},
+		},
+	},
+	.bus_clk_names = dsi_v2_bus_clk_names,
+	.num_bus_clks = ARRAY_SIZE(dsi_v2_bus_clk_names),
 };
 
 static const char * const dsi_6g_bus_clk_names[] = {
@@ -75,7 +88,7 @@ static const struct msm_dsi_config msm8994_dsi_cfg = {
 };
 
 static const struct msm_dsi_cfg_handler dsi_cfg_handlers[] = {
-	{MSM_DSI_VER_MAJOR_V2, U32_MAX, &dsi_v2_cfg},
+	{MSM_DSI_VER_MAJOR_V2, MSM_DSI_V2_VER_MINOR_8064, &apq8064_dsi_cfg},
 	{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V1_0,
 						&msm8974_apq8084_dsi_cfg},
 	{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V1_1,
diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.h b/drivers/gpu/drm/msm/dsi/dsi_cfg.h
index 5a36836..a68c836 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.h
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.h
@@ -25,6 +25,8 @@
 #define MSM_DSI_6G_VER_MINOR_V1_3	0x10030000
 #define MSM_DSI_6G_VER_MINOR_V1_3_1	0x10030001
 
+#define MSM_DSI_V2_VER_MINOR_8064	0x0
+
 #define DSI_6G_REG_SHIFT	4
 
 struct msm_dsi_config {
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

[PATCH 09/12] drm/msm/dsi: Don't use iommu for command TX buffer for DSIv2

[Archit Taneja]

We currently use iommu allocated DMA buffers for sending DSI commands.
DSIv2 doesn't have a port connected to the MDP iommu. Therefore, it
can't use iommu allocated buffers to fetch DSI commands.

Use a regular contiguous DMA buffer if we are DSIv2.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/dsi.h         |   4 +-
 drivers/gpu/drm/msm/dsi/dsi_host.c    | 110 +++++++++++++++++++++++-----------
 drivers/gpu/drm/msm/dsi/dsi_manager.c |   6 +-
 3 files changed, 79 insertions(+), 41 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h
index 7336b55..749fbb2 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.h
+++ b/drivers/gpu/drm/msm/dsi/dsi.h
@@ -91,7 +91,7 @@ int msm_dsi_manager_phy_enable(int id,
 		u32 *clk_pre, u32 *clk_post);
 void msm_dsi_manager_phy_disable(int id);
 int msm_dsi_manager_cmd_xfer(int id, const struct mipi_dsi_msg *msg);
-bool msm_dsi_manager_cmd_xfer_trigger(int id, u32 iova, u32 len);
+bool msm_dsi_manager_cmd_xfer_trigger(int id, u32 dma_base, u32 len);
 int msm_dsi_manager_register(struct msm_dsi *msm_dsi);
 void msm_dsi_manager_unregister(struct msm_dsi *msm_dsi);
 
@@ -145,7 +145,7 @@ int msm_dsi_host_cmd_tx(struct mipi_dsi_host *host,
 int msm_dsi_host_cmd_rx(struct mipi_dsi_host *host,
 					const struct mipi_dsi_msg *msg);
 void msm_dsi_host_cmd_xfer_commit(struct mipi_dsi_host *host,
-					u32 iova, u32 len);
+					u32 dma_base, u32 len);
 int msm_dsi_host_enable(struct mipi_dsi_host *host);
 int msm_dsi_host_disable(struct mipi_dsi_host *host);
 int msm_dsi_host_power_on(struct mipi_dsi_host *host);
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 16c5cfb..006591d 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -138,7 +138,15 @@ struct msm_dsi_host {
 	struct work_struct err_work;
 	struct workqueue_struct *workqueue;
 
+	/* DSI 6G TX buffer*/
 	struct drm_gem_object *tx_gem_obj;
+
+	/* DSI v2 TX buffer */
+	void *tx_buf;
+	dma_addr_t tx_buf_paddr;
+
+	int tx_size;
+
 	u8 *rx_buf;
 
 	struct drm_display_mode *mode;
@@ -988,29 +996,46 @@ static void dsi_wait4video_eng_busy(struct msm_dsi_host *msm_host)
 static int dsi_tx_buf_alloc(struct msm_dsi_host *msm_host, int size)
 {
 	struct drm_device *dev = msm_host->dev;
+	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
 	int ret;
 	u32 iova;
 
-	mutex_lock(&dev->struct_mutex);
-	msm_host->tx_gem_obj = msm_gem_new(dev, size, MSM_BO_UNCACHED);
-	if (IS_ERR(msm_host->tx_gem_obj)) {
-		ret = PTR_ERR(msm_host->tx_gem_obj);
-		pr_err("%s: failed to allocate gem, %d\n", __func__, ret);
-		msm_host->tx_gem_obj = NULL;
+	if (cfg_hnd->major == MSM_DSI_VER_MAJOR_6G) {
+		mutex_lock(&dev->struct_mutex);
+		msm_host->tx_gem_obj = msm_gem_new(dev, size, MSM_BO_UNCACHED);
+		if (IS_ERR(msm_host->tx_gem_obj)) {
+			ret = PTR_ERR(msm_host->tx_gem_obj);
+			pr_err("%s: failed to allocate gem, %d\n",
+				__func__, ret);
+			msm_host->tx_gem_obj = NULL;
+			mutex_unlock(&dev->struct_mutex);
+			return ret;
+		}
+
+		ret = msm_gem_get_iova_locked(msm_host->tx_gem_obj, 0, &iova);
+		if (ret) {
+			pr_err("%s: failed to get iova, %d\n", __func__, ret);
+			return ret;
+		}
 		mutex_unlock(&dev->struct_mutex);
-		return ret;
-	}
 
-	ret = msm_gem_get_iova_locked(msm_host->tx_gem_obj, 0, &iova);
-	if (ret) {
-		pr_err("%s: failed to get iova, %d\n", __func__, ret);
-		return ret;
-	}
-	mutex_unlock(&dev->struct_mutex);
+		if (iova & 0x07) {
+			pr_err("%s: buf NOT 8 bytes aligned\n", __func__);
+			return -EINVAL;
+		}
 
-	if (iova & 0x07) {
-		pr_err("%s: buf NOT 8 bytes aligned\n", __func__);
-		return -EINVAL;
+		msm_host->tx_size = msm_host->tx_gem_obj->size;
+	} else {
+		msm_host->tx_buf = dma_alloc_coherent(dev->dev, size,
+					&msm_host->tx_buf_paddr, GFP_KERNEL);
+		if (!msm_host->tx_buf) {
+			ret = -ENOMEM;
+			pr_err("%s: failed to allocate tx buf, %d\n",
+				__func__, ret);
+			return ret;
+		}
+
+		msm_host->tx_size = size;
 	}
 
 	return 0;
@@ -1027,14 +1052,19 @@ static void dsi_tx_buf_free(struct msm_dsi_host *msm_host)
 		msm_host->tx_gem_obj = NULL;
 		mutex_unlock(&dev->struct_mutex);
 	}
+
+	if (msm_host->tx_buf)
+		dma_free_coherent(dev->dev, msm_host->tx_size, msm_host->tx_buf,
+			msm_host->tx_buf_paddr);
 }
 
 /*
  * prepare cmd buffer to be txed
  */
-static int dsi_cmd_dma_add(struct drm_gem_object *tx_gem,
-			const struct mipi_dsi_msg *msg)
+static int dsi_cmd_dma_add(struct msm_dsi_host *msm_host,
+			   const struct mipi_dsi_msg *msg)
 {
+	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
 	struct mipi_dsi_packet packet;
 	int len;
 	int ret;
@@ -1047,17 +1077,20 @@ static int dsi_cmd_dma_add(struct drm_gem_object *tx_gem,
 	}
 	len = (packet.size + 3) & (~0x3);
 
-	if (len > tx_gem->size) {
+	if (len > msm_host->tx_size) {
 		pr_err("%s: packet size is too big\n", __func__);
 		return -EINVAL;
 	}
 
-	data = msm_gem_vaddr(tx_gem);
-
-	if (IS_ERR(data)) {
-		ret = PTR_ERR(data);
-		pr_err("%s: get vaddr failed, %d\n", __func__, ret);
-		return ret;
+	if (cfg_hnd->major == MSM_DSI_VER_MAJOR_6G) {
+		data = msm_gem_vaddr(msm_host->tx_gem_obj);
+		if (IS_ERR(data)) {
+			ret = PTR_ERR(data);
+			pr_err("%s: get vaddr failed, %d\n", __func__, ret);
+			return ret;
+		}
+	} else {
+		data = msm_host->tx_buf;
 	}
 
 	/* MSM specific command format in memory */
@@ -1123,17 +1156,21 @@ static int dsi_long_read_resp(u8 *buf, const struct mipi_dsi_msg *msg)
 	return msg->rx_len;
 }
 
-
 static int dsi_cmd_dma_tx(struct msm_dsi_host *msm_host, int len)
 {
+	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
 	int ret;
-	u32 iova;
+	u32 dma_base;
 	bool triggered;
 
-	ret = msm_gem_get_iova(msm_host->tx_gem_obj, 0, &iova);
-	if (ret) {
-		pr_err("%s: failed to get iova: %d\n", __func__, ret);
-		return ret;
+	if (cfg_hnd->major == MSM_DSI_VER_MAJOR_6G) {
+		ret = msm_gem_get_iova(msm_host->tx_gem_obj, 0, &dma_base);
+		if (ret) {
+			pr_err("%s: failed to get iova: %d\n", __func__, ret);
+			return ret;
+		}
+	} else {
+		dma_base = msm_host->tx_buf_paddr;
 	}
 
 	reinit_completion(&msm_host->dma_comp);
@@ -1141,7 +1178,7 @@ static int dsi_cmd_dma_tx(struct msm_dsi_host *msm_host, int len)
 	dsi_wait4video_eng_busy(msm_host);
 
 	triggered = msm_dsi_manager_cmd_xfer_trigger(
-						msm_host->id, iova, len);
+						msm_host->id, dma_base, len);
 	if (triggered) {
 		ret = wait_for_completion_timeout(&msm_host->dma_comp,
 					msecs_to_jiffies(200));
@@ -1213,7 +1250,7 @@ static int dsi_cmds2buf_tx(struct msm_dsi_host *msm_host,
 	int bllp_len = msm_host->mode->hdisplay *
 			dsi_get_bpp(msm_host->format) / 8;
 
-	len = dsi_cmd_dma_add(msm_host->tx_gem_obj, msg);
+	len = dsi_cmd_dma_add(msm_host, msg);
 	if (!len) {
 		pr_err("%s: failed to add cmd type = 0x%x\n",
 			__func__,  msg->type);
@@ -1903,11 +1940,12 @@ int msm_dsi_host_cmd_rx(struct mipi_dsi_host *host,
 	return ret;
 }
 
-void msm_dsi_host_cmd_xfer_commit(struct mipi_dsi_host *host, u32 iova, u32 len)
+void msm_dsi_host_cmd_xfer_commit(struct mipi_dsi_host *host, u32 dma_base,
+				  u32 len)
 {
 	struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
 
-	dsi_write(msm_host, REG_DSI_DMA_BASE, iova);
+	dsi_write(msm_host, REG_DSI_DMA_BASE, dma_base);
 	dsi_write(msm_host, REG_DSI_DMA_LEN, len);
 	dsi_write(msm_host, REG_DSI_TRIG_DMA, 1);
 
diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c
index 0455ff7..58ba7ec 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_manager.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c
@@ -774,7 +774,7 @@ restore_host0:
 	return ret;
 }
 
-bool msm_dsi_manager_cmd_xfer_trigger(int id, u32 iova, u32 len)
+bool msm_dsi_manager_cmd_xfer_trigger(int id, u32 dma_base, u32 len)
 {
 	struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
 	struct msm_dsi *msm_dsi0 = dsi_mgr_get_dsi(DSI_0);
@@ -784,9 +784,9 @@ bool msm_dsi_manager_cmd_xfer_trigger(int id, u32 iova, u32 len)
 		return false;
 
 	if (IS_SYNC_NEEDED() && msm_dsi0)
-		msm_dsi_host_cmd_xfer_commit(msm_dsi0->host, iova, len);
+		msm_dsi_host_cmd_xfer_commit(msm_dsi0->host, dma_base, len);
 
-	msm_dsi_host_cmd_xfer_commit(host, iova, len);
+	msm_dsi_host_cmd_xfer_commit(host, dma_base, len);
 
 	return true;
 }
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 10/12] drm/msm/dsi: SFPB: Update generated headers

[Archit Taneja]

Update SFPB register data now that we intend to use it.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/sfpb.xml.h | 26 ++++++++++++++------------
 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/sfpb.xml.h b/drivers/gpu/drm/msm/dsi/sfpb.xml.h
index 06cbddf..63947b2 100644
--- a/drivers/gpu/drm/msm/dsi/sfpb.xml.h
+++ b/drivers/gpu/drm/msm/dsi/sfpb.xml.h
@@ -8,17 +8,8 @@ http://github.com/freedreno/envytools/
 git clone https://github.com/freedreno/envytools.git
 
 The rules-ng-ng source files this header was generated from are:
-- /home/robclark/src/freedreno/envytools/rnndb/msm.xml                 (    676 bytes, from 2015-05-20 20:03:14)
-- /home/robclark/src/freedreno/envytools/rnndb/freedreno_copyright.xml (   1453 bytes, from 2015-05-20 20:03:07)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp4.xml            (  20915 bytes, from 2015-05-20 20:03:14)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp_common.xml      (   2576 bytes, from 2015-07-09 22:10:24)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp5.xml            (  36021 bytes, from 2015-07-09 22:10:24)
-- /home/robclark/src/freedreno/envytools/rnndb/dsi/dsi.xml             (  26057 bytes, from 2015-08-14 21:47:57)
-- /home/robclark/src/freedreno/envytools/rnndb/dsi/sfpb.xml            (    344 bytes, from 2015-05-20 20:03:07)
-- /home/robclark/src/freedreno/envytools/rnndb/dsi/mmss_cc.xml         (   1686 bytes, from 2015-05-20 20:03:14)
-- /home/robclark/src/freedreno/envytools/rnndb/hdmi/qfprom.xml         (    600 bytes, from 2015-05-20 20:03:07)
-- /home/robclark/src/freedreno/envytools/rnndb/hdmi/hdmi.xml           (  29154 bytes, from 2015-08-10 21:25:43)
-- /home/robclark/src/freedreno/envytools/rnndb/edp/edp.xml             (  10416 bytes, from 2015-05-20 20:03:14)
+- /local/mnt/workspace/source_trees/envytools/rnndb/../rnndb/dsi/sfpb.xml   (    602 bytes, from 2015-10-14 11:09:08)
+- /local/mnt/workspace/source_trees/envytools/rnndb/freedreno_copyright.xml (   1453 bytes, from 2015-02-09 03:18:10)
 
 Copyright (C) 2013-2015 by the following authors:
 - Rob Clark <robdclark@gmail.com> (robclark)
@@ -45,7 +36,18 @@ WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 */
 
 
-#define REG_SFPB_CFG						0x00000058
+enum sfpb_ahb_arb_master_port_en {
+	SFPB_MASTER_PORT_ENABLE = 3,
+	SFPB_MASTER_PORT_DISABLE = 0,
+};
+
+#define REG_SFPB_GPREG						0x00000058
+#define SFPB_GPREG_MASTER_PORT_EN__MASK				0x00001800
+#define SFPB_GPREG_MASTER_PORT_EN__SHIFT			11
+static inline uint32_t SFPB_GPREG_MASTER_PORT_EN(enum sfpb_ahb_arb_master_port_en val)
+{
+	return ((val) << SFPB_GPREG_MASTER_PORT_EN__SHIFT) & SFPB_GPREG_MASTER_PORT_EN__MASK;
+}
 
 
 #endif /* SFPB_XML */
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 11/12] drm/msm/dsi: Enable MMSS SPFB port via syscon

[Archit Taneja]

For DSIv2 to work, we need to enable MMSS_AHB_ARB_MASTER_PORT in
MMSS_SFPB. We enable the required bitfield by retrieving MMSS_SFPB
regmap pointer via syscon.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 006591d..5f3142a 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -24,10 +24,13 @@
 #include <linux/of_graph.h>
 #include <linux/regulator/consumer.h>
 #include <linux/spinlock.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 #include <video/mipi_display.h>
 
 #include "dsi.h"
 #include "dsi.xml.h"
+#include "sfpb.xml.h"
 #include "dsi_cfg.h"
 
 static int dsi_get_version(const void __iomem *base, u32 *major, u32 *minor)
@@ -149,6 +152,8 @@ struct msm_dsi_host {
 
 	u8 *rx_buf;
 
+	struct regmap *sfpb;
+
 	struct drm_display_mode *mode;
 
 	/* connected device info */
@@ -1573,6 +1578,16 @@ static int dsi_host_parse_dt(struct msm_dsi_host *msm_host)
 
 	msm_host->device_node = device_node;
 
+	if (of_property_read_bool(np, "syscon-sfpb")) {
+		msm_host->sfpb = syscon_regmap_lookup_by_phandle(np,
+					"syscon-sfpb");
+		if (IS_ERR(msm_host->sfpb)) {
+			dev_err(dev, "%s: failed to get sfpb regmap\n",
+				__func__);
+			return PTR_ERR(msm_host->sfpb);
+		}
+	}
+
 	return 0;
 }
 
@@ -2036,6 +2051,20 @@ int msm_dsi_host_disable(struct mipi_dsi_host *host)
 	return 0;
 }
 
+static void msm_dsi_sfpb_config(struct msm_dsi_host *msm_host, bool enable)
+{
+	enum sfpb_ahb_arb_master_port_en en;
+
+	if (!msm_host->sfpb)
+		return;
+
+	en = enable ? SFPB_MASTER_PORT_ENABLE : SFPB_MASTER_PORT_DISABLE;
+
+	regmap_update_bits(msm_host->sfpb, REG_SFPB_GPREG,
+			SFPB_GPREG_MASTER_PORT_EN__MASK,
+			SFPB_GPREG_MASTER_PORT_EN(en));
+}
+
 int msm_dsi_host_power_on(struct mipi_dsi_host *host)
 {
 	struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
@@ -2048,6 +2077,8 @@ int msm_dsi_host_power_on(struct mipi_dsi_host *host)
 		goto unlock_ret;
 	}
 
+	msm_dsi_sfpb_config(msm_host, true);
+
 	ret = dsi_calc_clk_rate(msm_host);
 	if (ret) {
 		pr_err("%s: unable to calc clk rate, %d\n", __func__, ret);
@@ -2135,6 +2166,8 @@ int msm_dsi_host_power_off(struct mipi_dsi_host *host)
 
 	dsi_host_regulator_disable(msm_host);
 
+	msm_dsi_sfpb_config(msm_host, false);
+
 	DBG("-");
 
 	msm_host->power_on = false;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

[PATCH 12/12] dt-bindings: Add DSIv2 documentation

[Archit Taneja]

Add additional property info needed for DSIv2 DT.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 Documentation/devicetree/bindings/drm/msm/dsi.txt | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/drm/msm/dsi.txt b/Documentation/devicetree/bindings/drm/msm/dsi.txt
index d56923c..75f8492 100644
--- a/Documentation/devicetree/bindings/drm/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/drm/msm/dsi.txt
@@ -13,18 +13,25 @@ Required properties:
 - power-domains: Should be <&mmcc MDSS_GDSC>.
 - clocks: device clocks
   See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
-- clock-names: the following clocks are required:
+- clock-names: these vary based on the DSI version. For DSI6G:
   * "bus_clk"
   * "byte_clk"
+  * "byte_clk_src
   * "core_clk"
   * "core_mmss_clk"
   * "iface_clk"
   * "mdp_core_clk"
   * "pixel_clk"
+  * "pixel_clk_src"
+  For DSIv2, we need a few more:
+   * "dsi_clk_src"
+   * "esc_clk_src"
+   * "src_clk"
 - vdd-supply: phandle to vdd regulator device node
 - vddio-supply: phandle to vdd-io regulator device node
 - vdda-supply: phandle to vdda regulator device node
 - qcom,dsi-phy: phandle to DSI PHY device node
+- syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2)
 
 Optional properties:
 - panel@0: Node of panel connected to this DSI controller.
@@ -51,6 +58,7 @@ Required properties:
   * "qcom,dsi-phy-28nm-hpm"
   * "qcom,dsi-phy-28nm-lp"
   * "qcom,dsi-phy-20nm"
+  * "qcom,dsi-phy-28nm-8960"
 - reg: Physical base address and length of the registers of PLL, PHY and PHY
   regulator
 - reg-names: The names of register regions. The following regions are required:
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 03/12] drm/msm/dsi: Add DSI PLL for 28nm 8960 PHY

[Stephen Boyd]

On 10/14, Archit Taneja wrote:
> diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c
> new file mode 100644
> index 0000000..e71b4ee
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c
> @@ -0,0 +1,529 @@
> +/*
> + * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>

Is this include used?

> +#include <linux/clk-provider.h>
> +
> +#include "dsi_pll.h"
> +#include "dsi.xml.h"
> +
> +/*
[..]
> +
> +#define to_pll_28nm(x)	container_of(x, struct dsi_pll_28nm, base)
> +
> +static bool pll_28nm_poll_for_ready(struct dsi_pll_28nm *pll_28nm,
> +				    u32 nb_tries, u32 timeout_us)

Why not use unsigned types for these counts? I don't imagine we
care about being precisely 32 bits.

> +{
> +	bool pll_locked = false;
> +	u32 val;
> +
[..]
> +	DBG("id=%d", pll_28nm->id);
> +
> +	/*
> +	 * before enabling the PLL, configure the bit clock divider since we
> +	 * don't expose it as a clock to the outside world
> +	 * 1: read back the byte clock divider that should aready be set

s/aready/already/

> +	 * 2: divide by 8 to get bit clock divider
> +	 * 3: write it to POSTDIV1
> +	 */
> +	val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9);
> +	byte_div = val + 1;
> +	bit_div = byte_div / 8;
> +
> +	val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8);
[..]
> +
> +static void dsi_pll_28nm_destroy(struct msm_dsi_pll *pll)
> +{
> +	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
> +	int i;
> +
> +	msm_dsi_pll_helper_unregister_clks(pll_28nm->pdev,
> +					pll_28nm->clks, pll_28nm->num_clks);
> +
> +	for (i = 0; i < NUM_PROVIDED_CLKS; i++)
> +		pll_28nm->provided_clks[i] = NULL;
> +
> +	pll_28nm->num_clks = 0;
> +	pll_28nm->clk_data.clks = NULL;
> +	pll_28nm->clk_data.clk_num = 0;

Is all this really necessary?

> +}
> +
> +static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm)
> +{
> +	char clk_name[32], parent[32], vco_name[32];
> +	struct clk_init_data vco_init = {
> +		.parent_names = (const char *[]){ "pxo" },
> +		.num_parents = 1,
> +		.name = vco_name,
> +		.ops = &clk_ops_dsi_pll_28nm_vco,
> +	};
> +	struct device *dev = &pll_28nm->pdev->dev;
> +	struct clk **clks = pll_28nm->clks;
> +	struct clk **provided_clks = pll_28nm->provided_clks;
> +	struct clk_bytediv *bytediv;
> +	struct clk_init_data bytediv_init;


	struct clk_init_data bytediv_init = { };

Just in case we add some new field there?

> +	int ret, num = 0;
> +
> +	DBG("%d", pll_28nm->id);
> +
> +	bytediv = devm_kzalloc(dev, sizeof(*bytediv), GFP_KERNEL);
> +	if (!bytediv)
> +		return -ENOMEM;
> +
> +	pll_28nm->bytediv = bytediv;
> +
> +	snprintf(vco_name, 32, "dsi%dvco_clk", pll_28nm->id);
> +	pll_28nm->base.clk_hw.init = &vco_init;
> +
> +	clks[num++] = clk_register(dev, &pll_28nm->base.clk_hw);
> +
> +	/* prepare and register bytediv */
> +	bytediv->hw.init = &bytediv_init;
> +	bytediv->reg = pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_CTRL_9;
> +
> +	snprintf(parent, 32, "dsi%dvco_clk", pll_28nm->id);
> +	snprintf(clk_name, 32, "dsi%dpllbyte", pll_28nm->id);
> +
> +	bytediv_init.name = clk_name;
> +	bytediv_init.ops = &clk_bytediv_ops;
> +	bytediv_init.flags = CLK_SET_RATE_PARENT;
> +	bytediv_init.parent_names = (const char *[]) { parent };

Can't we just do &parent instead of this anonymous array?

> +	bytediv_init.num_parents = 1;
> +
> +	/* DIV2 */

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 03/12] drm/msm/dsi: Add DSI PLL for 28nm 8960 PHY

[Archit Taneja]

On 10/15/2015 02:05 AM, Stephen Boyd wrote:
> On 10/14, Archit Taneja wrote:
>> diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c
>> new file mode 100644
>> index 0000000..e71b4ee
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c
>> @@ -0,0 +1,529 @@
>> +/*
>> + * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/clk.h>
>
> Is this include used?

It isn't. I'll remove it.

>
>> +#include <linux/clk-provider.h>
>> +
>> +#include "dsi_pll.h"
>> +#include "dsi.xml.h"
>> +
>> +/*
> [..]
>> +
>> +#define to_pll_28nm(x)	container_of(x, struct dsi_pll_28nm, base)
>> +
>> +static bool pll_28nm_poll_for_ready(struct dsi_pll_28nm *pll_28nm,
>> +				    u32 nb_tries, u32 timeout_us)
>
> Why not use unsigned types for these counts? I don't imagine we
> care about being precisely 32 bits.

Yeah. We don't even need an unsigned type. I'll replace it with integer 
type.

>
>> +{
>> +	bool pll_locked = false;
>> +	u32 val;
>> +
> [..]
>> +	DBG("id=%d", pll_28nm->id);
>> +
>> +	/*
>> +	 * before enabling the PLL, configure the bit clock divider since we
>> +	 * don't expose it as a clock to the outside world
>> +	 * 1: read back the byte clock divider that should aready be set
>
> s/aready/already/

Thanks, I'll fix this.

>
>> +	 * 2: divide by 8 to get bit clock divider
>> +	 * 3: write it to POSTDIV1
>> +	 */
>> +	val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9);
>> +	byte_div = val + 1;
>> +	bit_div = byte_div / 8;
>> +
>> +	val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8);
> [..]
>> +
>> +static void dsi_pll_28nm_destroy(struct msm_dsi_pll *pll)
>> +{
>> +	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
>> +	int i;
>> +
>> +	msm_dsi_pll_helper_unregister_clks(pll_28nm->pdev,
>> +					pll_28nm->clks, pll_28nm->num_clks);
>> +
>> +	for (i = 0; i < NUM_PROVIDED_CLKS; i++)
>> +		pll_28nm->provided_clks[i] = NULL;
>> +
>> +	pll_28nm->num_clks = 0;
>> +	pll_28nm->clk_data.clks = NULL;
>> +	pll_28nm->clk_data.clk_num = 0;
>
> Is all this really necessary?

It isn't. I copy pasted from dsi_pll_28nm.c and it had this. Will make
a patch to remove it from that file too.

>
>> +}
>> +
>> +static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm)
>> +{
>> +	char clk_name[32], parent[32], vco_name[32];
>> +	struct clk_init_data vco_init = {
>> +		.parent_names = (const char *[]){ "pxo" },
>> +		.num_parents = 1,
>> +		.name = vco_name,
>> +		.ops = &clk_ops_dsi_pll_28nm_vco,
>> +	};
>> +	struct device *dev = &pll_28nm->pdev->dev;
>> +	struct clk **clks = pll_28nm->clks;
>> +	struct clk **provided_clks = pll_28nm->provided_clks;
>> +	struct clk_bytediv *bytediv;
>> +	struct clk_init_data bytediv_init;
>
>
> 	struct clk_init_data bytediv_init = { };
>
> Just in case we add some new field there?

Will do.

>
>> +	int ret, num = 0;
>> +
>> +	DBG("%d", pll_28nm->id);
>> +
>> +	bytediv = devm_kzalloc(dev, sizeof(*bytediv), GFP_KERNEL);
>> +	if (!bytediv)
>> +		return -ENOMEM;
>> +
>> +	pll_28nm->bytediv = bytediv;
>> +
>> +	snprintf(vco_name, 32, "dsi%dvco_clk", pll_28nm->id);
>> +	pll_28nm->base.clk_hw.init = &vco_init;
>> +
>> +	clks[num++] = clk_register(dev, &pll_28nm->base.clk_hw);
>> +
>> +	/* prepare and register bytediv */
>> +	bytediv->hw.init = &bytediv_init;
>> +	bytediv->reg = pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_CTRL_9;
>> +
>> +	snprintf(parent, 32, "dsi%dvco_clk", pll_28nm->id);
>> +	snprintf(clk_name, 32, "dsi%dpllbyte", pll_28nm->id);
>> +
>> +	bytediv_init.name = clk_name;
>> +	bytediv_init.ops = &clk_bytediv_ops;
>> +	bytediv_init.flags = CLK_SET_RATE_PARENT;
>> +	bytediv_init.parent_names = (const char *[]) { parent };
>
> Can't we just do &parent instead of this anonymous array?

&parent doesn't make sense here. parent in this function is an array
of characters, not a pointer to a character.

I can think of only this way. We do something similar when we call
clk_register_mux() in dsi_pll_28nm.c.

Archit

>
>> +	bytediv_init.num_parents = 1;
>> +
>> +	/* DIV2 */
>

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
Forum, hosted by The Linux Foundation
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 03/12] drm/msm/dsi: Add DSI PLL for 28nm 8960 PHY

[Stephen Boyd]

On 10/16, Archit Taneja wrote:
> 
> 
> On 10/15/2015 02:05 AM, Stephen Boyd wrote:
> >On 10/14, Archit Taneja wrote:
> >>+	bytediv->hw.init = &bytediv_init;
> >>+	bytediv->reg = pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_CTRL_9;
> >>+
> >>+	snprintf(parent, 32, "dsi%dvco_clk", pll_28nm->id);
> >>+	snprintf(clk_name, 32, "dsi%dpllbyte", pll_28nm->id);
> >>+
> >>+	bytediv_init.name = clk_name;
> >>+	bytediv_init.ops = &clk_bytediv_ops;
> >>+	bytediv_init.flags = CLK_SET_RATE_PARENT;
> >>+	bytediv_init.parent_names = (const char *[]) { parent };
> >
> >Can't we just do &parent instead of this anonymous array?
> 
> &parent doesn't make sense here. parent in this function is an array
> of characters, not a pointer to a character.
> 
> I can think of only this way. We do something similar when we call
> clk_register_mux() in dsi_pll_28nm.c.
> 

Oh I missed that. Why not allocate the strings instead of putting
them on the stack?

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v2 00/10] drm/msm/dsi: Add support for DSI on MSM8960/APQ8064

[Archit Taneja]

Add support for DSI on 8960/8064. The DSI IP used in these chips is an
older version(DSIv2) of what we have right now(DSI6G).

The bulk of the additions come thanks to a different PHY/PLL. The DSI
host in itself doesn't have too many changes.

Changes in v2:
- Incorporated Stephen's comments for the DSI PLL patch.
- The dsi.xml.h and sfpb.xml.h changes were already picked up by Rob.
  Removed those patches.

Archit Taneja (10):
  drm/msm/dsi: Add support for 28nm PHY on 8960
  drm/msm/dsi: Add DSI PLL for 28nm 8960 PHY
  drm/msm/dsi: Use a better way to figure out DSI version
  drm/msm/dsi: Delay dsi_clk_init
  drm/msm/dsi: Parse bus clocks from a list
  drm/msm/dsi: Set up link clocks for DSIv2
  drm/msm/dsi: Add dsi_cfg for APQ8064
  drm/msm/dsi: Don't use iommu for command TX buffer for DSIv2
  drm/msm/dsi: Enable MMSS SPFB port via syscon
  dt-bindings: Add DSIv2 documentation

 .../devicetree/bindings/display/msm/dsi.txt        |  10 +-
 drivers/gpu/drm/msm/Kconfig                        |   8 +
 drivers/gpu/drm/msm/Makefile                       |   2 +
 drivers/gpu/drm/msm/dsi/dsi.h                      |   6 +-
 drivers/gpu/drm/msm/dsi/dsi_cfg.c                  |  35 +-
 drivers/gpu/drm/msm/dsi/dsi_cfg.h                  |   4 +
 drivers/gpu/drm/msm/dsi/dsi_host.c                 | 497 ++++++++++++++-----
 drivers/gpu/drm/msm/dsi/dsi_manager.c              |   6 +-
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c              |   4 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.h              |   1 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c    | 195 ++++++++
 drivers/gpu/drm/msm/dsi/pll/dsi_pll.c              |   3 +
 drivers/gpu/drm/msm/dsi/pll/dsi_pll.h              |  10 +
 drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c    | 533 +++++++++++++++++++++
 14 files changed, 1176 insertions(+), 138 deletions(-)
 create mode 100644 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
 create mode 100644 drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v2 01/10] drm/msm/dsi: Add support for 28nm PHY on 8960

[Archit Taneja]

DSI PHY on MSM8960 and APQ8064 is a 28nm PHY that's different from the
supported 28nm LP PHY found in newer chips.

Add support for the new PHY.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/Kconfig                     |   8 +
 drivers/gpu/drm/msm/Makefile                    |   1 +
 drivers/gpu/drm/msm/dsi/dsi.h                   |   1 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c           |   4 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.h           |   1 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 195 ++++++++++++++++++++++++
 6 files changed, 210 insertions(+)
 create mode 100644 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c

diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
index 84d3ec9..215495c 100644
--- a/drivers/gpu/drm/msm/Kconfig
+++ b/drivers/gpu/drm/msm/Kconfig
@@ -54,3 +54,11 @@ config DRM_MSM_DSI_20NM_PHY
 	default y
 	help
 	  Choose this option if the 20nm DSI PHY is used on the platform.
+
+config DRM_MSM_DSI_28NM_8960_PHY
+	bool "Enable DSI 28nm 8960 PHY driver in MSM DRM"
+	depends on DRM_MSM_DSI
+	default y
+	help
+	  Choose this option if the 28nm DSI PHY 8960 variant is used on the
+	  platform.
diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
index 1c90290..7523eca 100644
--- a/drivers/gpu/drm/msm/Makefile
+++ b/drivers/gpu/drm/msm/Makefile
@@ -62,6 +62,7 @@ msm-$(CONFIG_DRM_MSM_DSI) += dsi/dsi.o \
 
 msm-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += dsi/phy/dsi_phy_28nm.o
 msm-$(CONFIG_DRM_MSM_DSI_20NM_PHY) += dsi/phy/dsi_phy_20nm.o
+msm-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += dsi/phy/dsi_phy_28nm_8960.o
 
 ifeq ($(CONFIG_DRM_MSM_DSI_PLL),y)
 msm-y += dsi/pll/dsi_pll.o
diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h
index 5f5a373..8140e8b 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.h
+++ b/drivers/gpu/drm/msm/dsi/dsi.h
@@ -31,6 +31,7 @@ enum msm_dsi_phy_type {
 	MSM_DSI_PHY_28NM_HPM,
 	MSM_DSI_PHY_28NM_LP,
 	MSM_DSI_PHY_20NM,
+	MSM_DSI_PHY_28NM_8960,
 	MSM_DSI_PHY_MAX
 };
 
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index f1f955f..91a95fb 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -277,6 +277,10 @@ static const struct of_device_id dsi_phy_dt_match[] = {
 	{ .compatible = "qcom,dsi-phy-20nm",
 	  .data = &dsi_phy_20nm_cfgs },
 #endif
+#ifdef CONFIG_DRM_MSM_DSI_28NM_8960_PHY
+	{ .compatible = "qcom,dsi-phy-28nm-8960",
+	  .data = &dsi_phy_28nm_8960_cfgs },
+#endif
 	{}
 };
 
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
index 0456b25..0d54ed0 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
@@ -43,6 +43,7 @@ struct msm_dsi_phy_cfg {
 extern const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs;
 
 struct msm_dsi_dphy_timing {
 	u32 clk_pre;
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
new file mode 100644
index 0000000..197b039
--- /dev/null
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
@@ -0,0 +1,195 @@
+/*
+ * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "dsi_phy.h"
+#include "dsi.xml.h"
+
+static void dsi_28nm_dphy_set_timing(struct msm_dsi_phy *phy,
+		struct msm_dsi_dphy_timing *timing)
+{
+	void __iomem *base = phy->base;
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_0,
+		DSI_28nm_8960_PHY_TIMING_CTRL_0_CLK_ZERO(timing->clk_zero));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_1,
+		DSI_28nm_8960_PHY_TIMING_CTRL_1_CLK_TRAIL(timing->clk_trail));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_2,
+		DSI_28nm_8960_PHY_TIMING_CTRL_2_CLK_PREPARE(timing->clk_prepare));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_3, 0x0);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_4,
+		DSI_28nm_8960_PHY_TIMING_CTRL_4_HS_EXIT(timing->hs_exit));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_5,
+		DSI_28nm_8960_PHY_TIMING_CTRL_5_HS_ZERO(timing->hs_zero));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_6,
+		DSI_28nm_8960_PHY_TIMING_CTRL_6_HS_PREPARE(timing->hs_prepare));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_7,
+		DSI_28nm_8960_PHY_TIMING_CTRL_7_HS_TRAIL(timing->hs_trail));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_8,
+		DSI_28nm_8960_PHY_TIMING_CTRL_8_HS_RQST(timing->hs_rqst));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_9,
+		DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_GO(timing->ta_go) |
+		DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_SURE(timing->ta_sure));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_10,
+		DSI_28nm_8960_PHY_TIMING_CTRL_10_TA_GET(timing->ta_get));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_11,
+		DSI_28nm_8960_PHY_TIMING_CTRL_11_TRIG3_CMD(0));
+}
+
+static void dsi_28nm_phy_regulator_init(struct msm_dsi_phy *phy)
+{
+	void __iomem *base = phy->reg_base;
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_0, 0x3);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_1, 1);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_2, 1);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_3, 0);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_4,
+		0x100);
+}
+
+static void dsi_28nm_phy_regulator_ctrl(struct msm_dsi_phy *phy)
+{
+	void __iomem *base = phy->reg_base;
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_0, 0x3);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_1, 0xa);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_2, 0x4);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_3, 0x0);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_4, 0x20);
+}
+
+static void dsi_28nm_phy_calibration(struct msm_dsi_phy *phy)
+{
+	void __iomem *base = phy->reg_base;
+	u32 status;
+	int i = 5000;
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CAL_PWR_CFG,
+			0x3);
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_CAL_SW_CFG_2, 0x0);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_1, 0x5a);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_3, 0x10);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_4, 0x1);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_0, 0x1);
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_TRIGGER, 0x1);
+	usleep_range(5000, 6000);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_TRIGGER, 0x0);
+
+	do {
+		status = dsi_phy_read(base +
+				REG_DSI_28nm_8960_PHY_MISC_CAL_STATUS);
+
+		if (!(status & DSI_28nm_8960_PHY_MISC_CAL_STATUS_CAL_BUSY))
+			break;
+
+		udelay(1);
+	} while (--i > 0);
+}
+
+static void dsi_28nm_phy_lane_config(struct msm_dsi_phy *phy)
+{
+	void __iomem *base = phy->base;
+	int i;
+
+	for (i = 0; i < 4; i++) {
+		dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LN_CFG_0(i), 0x80);
+		dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LN_CFG_1(i), 0x45);
+		dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LN_CFG_2(i), 0x00);
+		dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LN_TEST_DATAPATH(i),
+			0x00);
+		dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LN_TEST_STR_0(i),
+			0x01);
+		dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LN_TEST_STR_1(i),
+			0x66);
+	}
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LNCK_CFG_0, 0x40);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LNCK_CFG_1, 0x67);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LNCK_CFG_2, 0x0);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LNCK_TEST_DATAPATH, 0x0);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LNCK_TEST_STR0, 0x1);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LNCK_TEST_STR1, 0x88);
+}
+
+static int dsi_28nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
+		const unsigned long bit_rate, const unsigned long esc_rate)
+{
+	struct msm_dsi_dphy_timing *timing = &phy->timing;
+	void __iomem *base = phy->base;
+
+	DBG("");
+
+	if (msm_dsi_dphy_timing_calc(timing, bit_rate, esc_rate)) {
+		dev_err(&phy->pdev->dev,
+			"%s: D-PHY timing calculation failed\n", __func__);
+		return -EINVAL;
+	}
+
+	dsi_28nm_phy_regulator_init(phy);
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LDO_CTRL, 0x04);
+
+	/* strength control */
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_STRENGTH_0, 0xff);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_STRENGTH_1, 0x00);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_STRENGTH_2, 0x06);
+
+	/* phy ctrl */
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_CTRL_0, 0x5f);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_CTRL_1, 0x00);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_CTRL_2, 0x00);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_CTRL_3, 0x10);
+
+	dsi_28nm_phy_regulator_ctrl(phy);
+
+	dsi_28nm_phy_calibration(phy);
+
+	dsi_28nm_phy_lane_config(phy);
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_BIST_CTRL_4, 0x0f);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_BIST_CTRL_1, 0x03);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_BIST_CTRL_0, 0x03);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_BIST_CTRL_4, 0x0);
+
+	dsi_28nm_dphy_set_timing(phy, timing);
+
+	return 0;
+}
+
+static void dsi_28nm_phy_disable(struct msm_dsi_phy *phy)
+{
+	dsi_phy_write(phy->base + REG_DSI_28nm_8960_PHY_CTRL_0, 0x0);
+
+	/*
+	 * Wait for the registers writes to complete in order to
+	 * ensure that the phy is completely disabled
+	 */
+	wmb();
+}
+
+const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs = {
+	.type = MSM_DSI_PHY_28NM_8960,
+	.src_pll_truthtable = { {true, true}, {false, true} },
+	.reg_cfg = {
+		.num = 1,
+		.regs = {
+			{"vddio", 1800000, 1800000, 100000, 100},
+		},
+	},
+	.ops = {
+		.enable = dsi_28nm_phy_enable,
+		.disable = dsi_28nm_phy_disable,
+	},
+};
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v2 02/10] drm/msm/dsi: Add DSI PLL for 28nm 8960 PHY

[Archit Taneja]

Add DSI PLL common clock framework clocks for 8960 PHY.

The PLL here is different from the ones found in B family msm chips. As
before, the DSI provides two clocks to the outside world. dsixpll and
dsixpllbyte (x = 1, 2). dsixpll is a regular clock divider, but
dsixpllbyte is modelled as a custom clock divider.

dsixpllbyte is the starting point of the PLL configuration. It is the
one that sets up the VCO clock rate. We need the VCO clock rate in the
form: F * byteclk, where F is a multiplication factor that varies on
the byte clock the DSI driver is trying to set. We use the custom
clk_ops for dsixpllbyte to ensure that the parent (VCO) is set at this
rate.

An additional divider (POSTDIV1) generates the bitclk. Since bit clock
can be derived from byteclock, we calculate it internally, and don't
expose it as a clock.

Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/Makefile                    |   1 +
 drivers/gpu/drm/msm/dsi/pll/dsi_pll.c           |   3 +
 drivers/gpu/drm/msm/dsi/pll/dsi_pll.h           |  10 +
 drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c | 533 ++++++++++++++++++++++++
 4 files changed, 547 insertions(+)
 create mode 100644 drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c

diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
index 7523eca..156a93d 100644
--- a/drivers/gpu/drm/msm/Makefile
+++ b/drivers/gpu/drm/msm/Makefile
@@ -67,6 +67,7 @@ msm-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += dsi/phy/dsi_phy_28nm_8960.o
 ifeq ($(CONFIG_DRM_MSM_DSI_PLL),y)
 msm-y += dsi/pll/dsi_pll.o
 msm-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += dsi/pll/dsi_pll_28nm.o
+msm-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += dsi/pll/dsi_pll_28nm_8960.o
 endif
 
 obj-$(CONFIG_DRM_MSM)	+= msm.o
diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c
index 5104fc9..5cd438f 100644
--- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c
+++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c
@@ -151,6 +151,9 @@ struct msm_dsi_pll *msm_dsi_pll_init(struct platform_device *pdev,
 	case MSM_DSI_PHY_28NM_LP:
 		pll = msm_dsi_pll_28nm_init(pdev, type, id);
 		break;
+	case MSM_DSI_PHY_28NM_8960:
+		pll = msm_dsi_pll_28nm_8960_init(pdev, id);
+		break;
 	default:
 		pll = ERR_PTR(-ENXIO);
 		break;
diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h
index 063caa2..80b6038 100644
--- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h
+++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h
@@ -93,6 +93,16 @@ static inline struct msm_dsi_pll *msm_dsi_pll_28nm_init(
 	return ERR_PTR(-ENODEV);
 }
 #endif
+#ifdef CONFIG_DRM_MSM_DSI_28NM_8960_PHY
+struct msm_dsi_pll *msm_dsi_pll_28nm_8960_init(struct platform_device *pdev,
+					       int id);
+#else
+struct msm_dsi_pll *msm_dsi_pll_28nm_8960_init(struct platform_device *pdev,
+					       int id)
+{
+	return ERR_PTR(-ENODEV);
+}
+#endif
 
 #endif /* __DSI_PLL_H__ */
 
diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c
new file mode 100644
index 0000000..38c90e1
--- /dev/null
+++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c
@@ -0,0 +1,533 @@
+/*
+ * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+
+#include "dsi_pll.h"
+#include "dsi.xml.h"
+
+/*
+ * DSI PLL 28nm (8960/A family) - clock diagram (eg: DSI1):
+ *
+ *
+ *                        +------+
+ *  dsi1vco_clk ----o-----| DIV1 |---dsi1pllbit (not exposed as clock)
+ *  F * byte_clk    |     +------+
+ *                  | bit clock divider (F / 8)
+ *                  |
+ *                  |     +------+
+ *                  o-----| DIV2 |---dsi0pllbyte---o---> To byte RCG
+ *                  |     +------+                 | (sets parent rate)
+ *                  | byte clock divider (F)       |
+ *                  |                              |
+ *                  |                              o---> To esc RCG
+ *                  |                                (doesn't set parent rate)
+ *                  |
+ *                  |     +------+
+ *                  o-----| DIV3 |----dsi0pll------o---> To dsi RCG
+ *                        +------+                 | (sets parent rate)
+ *                  dsi clock divider (F * magic)  |
+ *                                                 |
+ *                                                 o---> To pixel rcg
+ *                                                  (doesn't set parent rate)
+ */
+
+#define POLL_MAX_READS		8000
+#define POLL_TIMEOUT_US		1
+
+#define NUM_PROVIDED_CLKS	2
+
+#define VCO_REF_CLK_RATE	27000000
+#define VCO_MIN_RATE		600000000
+#define VCO_MAX_RATE		1200000000
+
+#define DSI_BYTE_PLL_CLK	0
+#define DSI_PIXEL_PLL_CLK	1
+
+#define VCO_PREF_DIV_RATIO	27
+
+struct pll_28nm_cached_state {
+	unsigned long vco_rate;
+	u8 postdiv3;
+	u8 postdiv2;
+	u8 postdiv1;
+};
+
+struct clk_bytediv {
+	struct clk_hw hw;
+	void __iomem *reg;
+};
+
+struct dsi_pll_28nm {
+	struct msm_dsi_pll base;
+
+	int id;
+	struct platform_device *pdev;
+	void __iomem *mmio;
+
+	/* custom byte clock divider */
+	struct clk_bytediv *bytediv;
+
+	/* private clocks: */
+	struct clk *clks[NUM_DSI_CLOCKS_MAX];
+	u32 num_clks;
+
+	/* clock-provider: */
+	struct clk *provided_clks[NUM_PROVIDED_CLKS];
+	struct clk_onecell_data clk_data;
+
+	struct pll_28nm_cached_state cached_state;
+};
+
+#define to_pll_28nm(x)	container_of(x, struct dsi_pll_28nm, base)
+
+static bool pll_28nm_poll_for_ready(struct dsi_pll_28nm *pll_28nm,
+				    int nb_tries, int timeout_us)
+{
+	bool pll_locked = false;
+	u32 val;
+
+	while (nb_tries--) {
+		val = pll_read(pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_RDY);
+		pll_locked = !!(val & DSI_28nm_8960_PHY_PLL_RDY_PLL_RDY);
+
+		if (pll_locked)
+			break;
+
+		udelay(timeout_us);
+	}
+	DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* ");
+
+	return pll_locked;
+}
+
+/*
+ * Clock Callbacks
+ */
+static int dsi_pll_28nm_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+				     unsigned long parent_rate)
+{
+	struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+	void __iomem *base = pll_28nm->mmio;
+	u32 val, temp, fb_divider;
+
+	DBG("rate=%lu, parent's=%lu", rate, parent_rate);
+
+	temp = rate / 10;
+	val = VCO_REF_CLK_RATE / 10;
+	fb_divider = (temp * VCO_PREF_DIV_RATIO) / val;
+	fb_divider = fb_divider / 2 - 1;
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_1,
+			fb_divider & 0xff);
+
+	val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2);
+
+	val |= (fb_divider >> 8) & 0x07;
+
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2,
+			val);
+
+	val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3);
+
+	val |= (VCO_PREF_DIV_RATIO - 1) & 0x3f;
+
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3,
+			val);
+
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_6,
+			0xf);
+
+	val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8);
+	val |= 0x7 << 4;
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8,
+			val);
+
+	return 0;
+}
+
+static int dsi_pll_28nm_clk_is_enabled(struct clk_hw *hw)
+{
+	struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+
+	return pll_28nm_poll_for_ready(pll_28nm, POLL_MAX_READS,
+					POLL_TIMEOUT_US);
+}
+
+static unsigned long dsi_pll_28nm_clk_recalc_rate(struct clk_hw *hw,
+						  unsigned long parent_rate)
+{
+	struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+	void __iomem *base = pll_28nm->mmio;
+	unsigned long vco_rate;
+	u32 status, fb_divider, temp, ref_divider;
+
+	VERB("parent_rate=%lu", parent_rate);
+
+	status = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_0);
+
+	if (status & DSI_28nm_8960_PHY_PLL_CTRL_0_ENABLE) {
+		fb_divider = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_1);
+		fb_divider &= 0xff;
+		temp = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2) & 0x07;
+		fb_divider = (temp << 8) | fb_divider;
+		fb_divider += 1;
+
+		ref_divider = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3);
+		ref_divider &= 0x3f;
+		ref_divider += 1;
+
+		/* multiply by 2 */
+		vco_rate = (parent_rate / ref_divider) * fb_divider * 2;
+	} else {
+		vco_rate = 0;
+	}
+
+	DBG("returning vco rate = %lu", vco_rate);
+
+	return vco_rate;
+}
+
+static const struct clk_ops clk_ops_dsi_pll_28nm_vco = {
+	.round_rate = msm_dsi_pll_helper_clk_round_rate,
+	.set_rate = dsi_pll_28nm_clk_set_rate,
+	.recalc_rate = dsi_pll_28nm_clk_recalc_rate,
+	.prepare = msm_dsi_pll_helper_clk_prepare,
+	.unprepare = msm_dsi_pll_helper_clk_unprepare,
+	.is_enabled = dsi_pll_28nm_clk_is_enabled,
+};
+
+/*
+ * Custom byte clock divier clk_ops
+ *
+ * This clock is the entry point to configuring the PLL. The user (dsi host)
+ * will set this clock's rate to the desired byte clock rate. The VCO lock
+ * frequency is a multiple of the byte clock rate. The multiplication factor
+ * (shown as F in the diagram above) is a function of the byte clock rate.
+ *
+ * This custom divider clock ensures that its parent (VCO) is set to the
+ * desired rate, and that the byte clock postdivider (POSTDIV2) is configured
+ * accordingly
+ */
+#define to_clk_bytediv(_hw) container_of(_hw, struct clk_bytediv, hw)
+
+static unsigned long clk_bytediv_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_bytediv *bytediv = to_clk_bytediv(hw);
+	unsigned int div;
+
+	div = pll_read(bytediv->reg) & 0xff;
+
+	return parent_rate / (div + 1);
+}
+
+/* find multiplication factor(wrt byte clock) at which the VCO should be set */
+static unsigned int get_vco_mul_factor(unsigned long byte_clk_rate)
+{
+	unsigned long bit_mhz;
+
+	/* convert to bit clock in Mhz */
+	bit_mhz = (byte_clk_rate * 8) / 1000000;
+
+	if (bit_mhz < 125)
+		return 64;
+	else if (bit_mhz < 250)
+		return 32;
+	else if (bit_mhz < 600)
+		return 16;
+	else
+		return 8;
+}
+
+static long clk_bytediv_round_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long *prate)
+{
+	unsigned long best_parent;
+	unsigned int factor;
+
+	factor = get_vco_mul_factor(rate);
+
+	best_parent = rate * factor;
+	*prate = clk_hw_round_rate(clk_hw_get_parent(hw), best_parent);
+
+	return *prate / factor;
+}
+
+static int clk_bytediv_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct clk_bytediv *bytediv = to_clk_bytediv(hw);
+	u32 val;
+	unsigned int factor;
+
+	factor = get_vco_mul_factor(rate);
+
+	val = pll_read(bytediv->reg);
+	val |= (factor - 1) & 0xff;
+	pll_write(bytediv->reg, val);
+
+	return 0;
+}
+
+/* Our special byte clock divider ops */
+static const struct clk_ops clk_bytediv_ops = {
+	.round_rate = clk_bytediv_round_rate,
+	.set_rate = clk_bytediv_set_rate,
+	.recalc_rate = clk_bytediv_recalc_rate,
+};
+
+/*
+ * PLL Callbacks
+ */
+static int dsi_pll_28nm_enable_seq(struct msm_dsi_pll *pll)
+{
+	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+	struct device *dev = &pll_28nm->pdev->dev;
+	void __iomem *base = pll_28nm->mmio;
+	bool locked;
+	unsigned int bit_div, byte_div;
+	int max_reads = 1000, timeout_us = 100;
+	u32 val;
+
+	DBG("id=%d", pll_28nm->id);
+
+	/*
+	 * before enabling the PLL, configure the bit clock divider since we
+	 * don't expose it as a clock to the outside world
+	 * 1: read back the byte clock divider that should already be set
+	 * 2: divide by 8 to get bit clock divider
+	 * 3: write it to POSTDIV1
+	 */
+	val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9);
+	byte_div = val + 1;
+	bit_div = byte_div / 8;
+
+	val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8);
+	val &= ~0xf;
+	val |= (bit_div - 1);
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8, val);
+
+	/* enable the PLL */
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_0,
+			DSI_28nm_8960_PHY_PLL_CTRL_0_ENABLE);
+
+	locked = pll_28nm_poll_for_ready(pll_28nm, max_reads, timeout_us);
+
+	if (unlikely(!locked))
+		dev_err(dev, "DSI PLL lock failed\n");
+	else
+		DBG("DSI PLL lock success");
+
+	return locked ? 0 : -EINVAL;
+}
+
+static void dsi_pll_28nm_disable_seq(struct msm_dsi_pll *pll)
+{
+	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+
+	DBG("id=%d", pll_28nm->id);
+	pll_write(pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_CTRL_0, 0x00);
+}
+
+static void dsi_pll_28nm_save_state(struct msm_dsi_pll *pll)
+{
+	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+	struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state;
+	void __iomem *base = pll_28nm->mmio;
+
+	cached_state->postdiv3 =
+			pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_10);
+	cached_state->postdiv2 =
+			pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9);
+	cached_state->postdiv1 =
+			pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8);
+
+	cached_state->vco_rate = clk_hw_get_rate(&pll->clk_hw);
+}
+
+static int dsi_pll_28nm_restore_state(struct msm_dsi_pll *pll)
+{
+	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+	struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state;
+	void __iomem *base = pll_28nm->mmio;
+	int ret;
+
+	ret = dsi_pll_28nm_clk_set_rate(&pll->clk_hw,
+					cached_state->vco_rate, 0);
+	if (ret) {
+		dev_err(&pll_28nm->pdev->dev,
+			"restore vco rate failed. ret=%d\n", ret);
+		return ret;
+	}
+
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_10,
+			cached_state->postdiv3);
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9,
+			cached_state->postdiv2);
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8,
+			cached_state->postdiv1);
+
+	return 0;
+}
+
+static int dsi_pll_28nm_get_provider(struct msm_dsi_pll *pll,
+				struct clk **byte_clk_provider,
+				struct clk **pixel_clk_provider)
+{
+	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+
+	if (byte_clk_provider)
+		*byte_clk_provider = pll_28nm->provided_clks[DSI_BYTE_PLL_CLK];
+	if (pixel_clk_provider)
+		*pixel_clk_provider =
+				pll_28nm->provided_clks[DSI_PIXEL_PLL_CLK];
+
+	return 0;
+}
+
+static void dsi_pll_28nm_destroy(struct msm_dsi_pll *pll)
+{
+	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+
+	msm_dsi_pll_helper_unregister_clks(pll_28nm->pdev,
+					pll_28nm->clks, pll_28nm->num_clks);
+}
+
+static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm)
+{
+	char *clk_name, *parent_name, *vco_name;
+	struct clk_init_data vco_init = {
+		.parent_names = (const char *[]){ "pxo" },
+		.num_parents = 1,
+		.ops = &clk_ops_dsi_pll_28nm_vco,
+	};
+	struct device *dev = &pll_28nm->pdev->dev;
+	struct clk **clks = pll_28nm->clks;
+	struct clk **provided_clks = pll_28nm->provided_clks;
+	struct clk_bytediv *bytediv;
+	struct clk_init_data bytediv_init = { };
+	int ret, num = 0;
+
+	DBG("%d", pll_28nm->id);
+
+	bytediv = devm_kzalloc(dev, sizeof(*bytediv), GFP_KERNEL);
+	if (!bytediv)
+		return -ENOMEM;
+
+	vco_name = devm_kzalloc(dev, 32, GFP_KERNEL);
+	if (!vco_name)
+		return -ENOMEM;
+
+	parent_name = devm_kzalloc(dev, 32, GFP_KERNEL);
+	if (!parent_name)
+		return -ENOMEM;
+
+	clk_name = devm_kzalloc(dev, 32, GFP_KERNEL);
+	if (!clk_name)
+		return -ENOMEM;
+
+	pll_28nm->bytediv = bytediv;
+
+	snprintf(vco_name, 32, "dsi%dvco_clk", pll_28nm->id);
+	vco_init.name = vco_name;
+
+	pll_28nm->base.clk_hw.init = &vco_init;
+
+	clks[num++] = clk_register(dev, &pll_28nm->base.clk_hw);
+
+	/* prepare and register bytediv */
+	bytediv->hw.init = &bytediv_init;
+	bytediv->reg = pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_CTRL_9;
+
+	snprintf(parent_name, 32, "dsi%dvco_clk", pll_28nm->id);
+	snprintf(clk_name, 32, "dsi%dpllbyte", pll_28nm->id);
+
+	bytediv_init.name = clk_name;
+	bytediv_init.ops = &clk_bytediv_ops;
+	bytediv_init.flags = CLK_SET_RATE_PARENT;
+	bytediv_init.parent_names = (const char * const *) &parent_name;
+	bytediv_init.num_parents = 1;
+
+	/* DIV2 */
+	clks[num++] = provided_clks[DSI_BYTE_PLL_CLK] =
+			clk_register(dev, &bytediv->hw);
+
+	snprintf(clk_name, 32, "dsi%dpll", pll_28nm->id);
+	/* DIV3 */
+	clks[num++] = provided_clks[DSI_PIXEL_PLL_CLK] =
+			clk_register_divider(dev, clk_name,
+				parent_name, 0, pll_28nm->mmio +
+				REG_DSI_28nm_8960_PHY_PLL_CTRL_10,
+				0, 8, 0, NULL);
+
+	pll_28nm->num_clks = num;
+
+	pll_28nm->clk_data.clk_num = NUM_PROVIDED_CLKS;
+	pll_28nm->clk_data.clks = provided_clks;
+
+	ret = of_clk_add_provider(dev->of_node,
+			of_clk_src_onecell_get, &pll_28nm->clk_data);
+	if (ret) {
+		dev_err(dev, "failed to register clk provider: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+struct msm_dsi_pll *msm_dsi_pll_28nm_8960_init(struct platform_device *pdev,
+					       int id)
+{
+	struct dsi_pll_28nm *pll_28nm;
+	struct msm_dsi_pll *pll;
+	int ret;
+
+	if (!pdev)
+		return ERR_PTR(-ENODEV);
+
+	pll_28nm = devm_kzalloc(&pdev->dev, sizeof(*pll_28nm), GFP_KERNEL);
+	if (!pll_28nm)
+		return ERR_PTR(-ENOMEM);
+
+	pll_28nm->pdev = pdev;
+	pll_28nm->id = id + 1;
+
+	pll_28nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL");
+	if (IS_ERR_OR_NULL(pll_28nm->mmio)) {
+		dev_err(&pdev->dev, "%s: failed to map pll base\n", __func__);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	pll = &pll_28nm->base;
+	pll->min_rate = VCO_MIN_RATE;
+	pll->max_rate = VCO_MAX_RATE;
+	pll->get_provider = dsi_pll_28nm_get_provider;
+	pll->destroy = dsi_pll_28nm_destroy;
+	pll->disable_seq = dsi_pll_28nm_disable_seq;
+	pll->save_state = dsi_pll_28nm_save_state;
+	pll->restore_state = dsi_pll_28nm_restore_state;
+
+	pll->en_seq_cnt = 1;
+	pll->enable_seqs[0] = dsi_pll_28nm_enable_seq;
+
+	ret = pll_28nm_register(pll_28nm);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register PLL: %d\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	return pll;
+}
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v2 03/10] drm/msm/dsi: Use a better way to figure out DSI version

[Archit Taneja]

The current version checking mechanism works fine for DSI6G blocks. It
doesn't work so well for older generation DSIv2 blocks.

The initial read of REG_DSI_6G_HW_VERSION(offset 0x0) would result in a
read of REG_DSI_CTRL for DSIv2. This register won't necessarily be 0 on
DSIv2. It can be non zero if DSI was previously initialized by the
bootloader.

Instead of reading offset 0x0, we now read offset 0x1f0. For DSIv2, this
register is DSI_VERSION, and is bound to be non-zero. On DSI6G, this
register(offset 0x1f0) is SCRATCH_REGISTER_0, which no one ever seems to
touch, and from all register dumps I'vc seen, holds 0 all the time.

Modify dsi_get_version to read REG_DSI_VERSION to determine whether we
are DSI6G or DSIv2.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 4c49868..8e8fcc7 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -33,17 +33,24 @@
 static int dsi_get_version(const void __iomem *base, u32 *major, u32 *minor)
 {
 	u32 ver;
-	u32 ver_6g;
 
 	if (!major || !minor)
 		return -EINVAL;
 
-	/* From DSI6G(v3), addition of a 6G_HW_VERSION register at offset 0
+	/*
+	 * From DSI6G(v3), addition of a 6G_HW_VERSION register at offset 0
 	 * makes all other registers 4-byte shifted down.
+	 *
+	 * In order to identify between DSI6G(v3) and beyond, and DSIv2 and
+	 * older, we read the DSI_VERSION register without any shift(offset
+	 * 0x1f0). In the case of DSIv2, this hast to be a non-zero value. In
+	 * the case of DSI6G, this has to be zero (the offset points to a
+	 * scratch register which we never touch)
 	 */
-	ver_6g = msm_readl(base + REG_DSI_6G_HW_VERSION);
-	if (ver_6g == 0) {
-		ver = msm_readl(base + REG_DSI_VERSION);
+
+	ver = msm_readl(base + REG_DSI_VERSION);
+	if (ver) {
+		/* older dsi host, there is no register shift */
 		ver = FIELD(ver, DSI_VERSION_MAJOR);
 		if (ver <= MSM_DSI_VER_MAJOR_V2) {
 			/* old versions */
@@ -54,12 +61,17 @@ static int dsi_get_version(const void __iomem *base, u32 *major, u32 *minor)
 			return -EINVAL;
 		}
 	} else {
+		/*
+		 * newer host, offset 0 has 6G_HW_VERSION, the rest of the
+		 * registers are shifted down, read DSI_VERSION again with
+		 * the shifted offset
+		 */
 		ver = msm_readl(base + DSI_6G_REG_SHIFT + REG_DSI_VERSION);
 		ver = FIELD(ver, DSI_VERSION_MAJOR);
 		if (ver == MSM_DSI_VER_MAJOR_6G) {
 			/* 6G version */
 			*major = ver;
-			*minor = ver_6g;
+			*minor = msm_readl(base + REG_DSI_6G_HW_VERSION);
 			return 0;
 		} else {
 			return -EINVAL;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

[PATCH v2 04/10] drm/msm/dsi: Delay dsi_clk_init

[Archit Taneja]

Initialize clocks only after we get the DSI host version. This will allow
us to get clocks using a pre-defined list based on the DSI major/minor
version of the host. This is required since clock requirements of
different major DSI revisions(v2 vs 6g) aren't the same.

Modify dsi_get_version to get the interface clock, and then put it after
it is used.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 32 ++++++++++++++++++++++----------
 1 file changed, 22 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 8e8fcc7..cbcf8dd 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -177,21 +177,31 @@ static const struct msm_dsi_cfg_handler *dsi_get_config(
 						struct msm_dsi_host *msm_host)
 {
 	const struct msm_dsi_cfg_handler *cfg_hnd = NULL;
+	struct device *dev = &msm_host->pdev->dev;
 	struct regulator *gdsc_reg;
+	struct clk *ahb_clk;
 	int ret;
 	u32 major = 0, minor = 0;
 
-	gdsc_reg = regulator_get(&msm_host->pdev->dev, "gdsc");
+	gdsc_reg = regulator_get(dev, "gdsc");
 	if (IS_ERR(gdsc_reg)) {
 		pr_err("%s: cannot get gdsc\n", __func__);
 		goto exit;
 	}
+
+	ahb_clk = clk_get(dev, "iface_clk");
+	if (IS_ERR(ahb_clk)) {
+		pr_err("%s: cannot get interface clock\n", __func__);
+		goto put_gdsc;
+	}
+
 	ret = regulator_enable(gdsc_reg);
 	if (ret) {
 		pr_err("%s: unable to enable gdsc\n", __func__);
-		goto put_gdsc;
+		goto put_clk;
 	}
-	ret = clk_prepare_enable(msm_host->ahb_clk);
+
+	ret = clk_prepare_enable(ahb_clk);
 	if (ret) {
 		pr_err("%s: unable to enable ahb_clk\n", __func__);
 		goto disable_gdsc;
@@ -208,9 +218,11 @@ static const struct msm_dsi_cfg_handler *dsi_get_config(
 	DBG("%s: Version %x:%x\n", __func__, major, minor);
 
 disable_clks:
-	clk_disable_unprepare(msm_host->ahb_clk);
+	clk_disable_unprepare(ahb_clk);
 disable_gdsc:
 	regulator_disable(gdsc_reg);
+put_clk:
+	clk_put(ahb_clk);
 put_gdsc:
 	regulator_put(gdsc_reg);
 exit:
@@ -1420,12 +1432,6 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi)
 		goto fail;
 	}
 
-	ret = dsi_clk_init(msm_host);
-	if (ret) {
-		pr_err("%s: unable to initialize dsi clks\n", __func__);
-		goto fail;
-	}
-
 	msm_host->ctrl_base = msm_ioremap(pdev, "dsi_ctrl", "DSI CTRL");
 	if (IS_ERR(msm_host->ctrl_base)) {
 		pr_err("%s: unable to map Dsi ctrl base\n", __func__);
@@ -1449,6 +1455,12 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi)
 		goto fail;
 	}
 
+	ret = dsi_clk_init(msm_host);
+	if (ret) {
+		pr_err("%s: unable to initialize dsi clks\n", __func__);
+		goto fail;
+	}
+
 	msm_host->rx_buf = devm_kzalloc(&pdev->dev, SZ_4K, GFP_KERNEL);
 	if (!msm_host->rx_buf) {
 		pr_err("%s: alloc rx temp buf failed\n", __func__);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v2 05/10] drm/msm/dsi: Parse bus clocks from a list

[Archit Taneja]

DSI bus clocks seem to vary between different DSI host versions, and the
SOC to which they belong. Even the enable/disable sequence varies.

Provide a list of bus clock names in dsi_cfg. The driver will use this to
retrieve the clocks, and enable/disable them.

Add bus clock lists for DSI6G, and DSI for MSM8916(this is DSI6G too, but
there is no MMSS_CC specific clock since there is no MMSS clock controller
on 8916).

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/dsi.h      |   1 +
 drivers/gpu/drm/msm/dsi/dsi_cfg.c  |  16 +++++-
 drivers/gpu/drm/msm/dsi/dsi_cfg.h  |   2 +
 drivers/gpu/drm/msm/dsi/dsi_host.c | 107 ++++++++++++-------------------------
 4 files changed, 53 insertions(+), 73 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h
index 8140e8b..7336b55 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.h
+++ b/drivers/gpu/drm/msm/dsi/dsi.h
@@ -36,6 +36,7 @@ enum msm_dsi_phy_type {
 };
 
 #define DSI_DEV_REGULATOR_MAX	8
+#define DSI_BUS_CLK_MAX		4
 
 /* Regulators for DSI devices */
 struct dsi_reg_entry {
diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.c b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
index 5872d5e..c40044f 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
@@ -18,6 +18,10 @@ static const struct msm_dsi_config dsi_v2_cfg = {
 	.io_offset = 0,
 };
 
+static const char * const dsi_6g_bus_clk_names[] = {
+	"mdp_core_clk", "iface_clk", "bus_clk", "core_mmss_clk",
+};
+
 static const struct msm_dsi_config msm8974_apq8084_dsi_cfg = {
 	.io_offset = DSI_6G_REG_SHIFT,
 	.reg_cfg = {
@@ -29,6 +33,12 @@ static const struct msm_dsi_config msm8974_apq8084_dsi_cfg = {
 			{"vddio", 1800000, 1800000, 100000, 100},
 		},
 	},
+	.bus_clk_names = dsi_6g_bus_clk_names,
+	.num_bus_clks = ARRAY_SIZE(dsi_6g_bus_clk_names),
+};
+
+static const char * const dsi_8916_bus_clk_names[] = {
+	"mdp_core_clk", "iface_clk", "bus_clk",
 };
 
 static const struct msm_dsi_config msm8916_dsi_cfg = {
@@ -42,6 +52,8 @@ static const struct msm_dsi_config msm8916_dsi_cfg = {
 			{"vddio", 1800000, 1800000, 100000, 100},
 		},
 	},
+	.bus_clk_names = dsi_8916_bus_clk_names,
+	.num_bus_clks = ARRAY_SIZE(dsi_8916_bus_clk_names),
 };
 
 static const struct msm_dsi_config msm8994_dsi_cfg = {
@@ -57,7 +69,9 @@ static const struct msm_dsi_config msm8994_dsi_cfg = {
 			{"lab_reg", -1, -1, -1, -1},
 			{"ibb_reg", -1, -1, -1, -1},
 		},
-	}
+	},
+	.bus_clk_names = dsi_6g_bus_clk_names,
+	.num_bus_clks = ARRAY_SIZE(dsi_6g_bus_clk_names),
 };
 
 static const struct msm_dsi_cfg_handler dsi_cfg_handlers[] = {
diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.h b/drivers/gpu/drm/msm/dsi/dsi_cfg.h
index 4cf8872..5a36836 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.h
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.h
@@ -30,6 +30,8 @@
 struct msm_dsi_config {
 	u32 io_offset;
 	struct dsi_reg_config reg_cfg;
+	const char * const *bus_clk_names;
+	const int num_bus_clks;
 };
 
 struct msm_dsi_cfg_handler {
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index cbcf8dd..1da9adb2 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -103,10 +103,9 @@ struct msm_dsi_host {
 
 	void __iomem *ctrl_base;
 	struct regulator_bulk_data supplies[DSI_DEV_REGULATOR_MAX];
-	struct clk *mdp_core_clk;
-	struct clk *ahb_clk;
-	struct clk *axi_clk;
-	struct clk *mmss_misc_ahb_clk;
+
+	struct clk *bus_clks[DSI_BUS_CLK_MAX];
+
 	struct clk *byte_clk;
 	struct clk *esc_clk;
 	struct clk *pixel_clk;
@@ -319,40 +318,22 @@ static int dsi_regulator_init(struct msm_dsi_host *msm_host)
 static int dsi_clk_init(struct msm_dsi_host *msm_host)
 {
 	struct device *dev = &msm_host->pdev->dev;
-	int ret = 0;
-
-	msm_host->mdp_core_clk = devm_clk_get(dev, "mdp_core_clk");
-	if (IS_ERR(msm_host->mdp_core_clk)) {
-		ret = PTR_ERR(msm_host->mdp_core_clk);
-		pr_err("%s: Unable to get mdp core clk. ret=%d\n",
-			__func__, ret);
-		goto exit;
-	}
-
-	msm_host->ahb_clk = devm_clk_get(dev, "iface_clk");
-	if (IS_ERR(msm_host->ahb_clk)) {
-		ret = PTR_ERR(msm_host->ahb_clk);
-		pr_err("%s: Unable to get mdss ahb clk. ret=%d\n",
-			__func__, ret);
-		goto exit;
-	}
-
-	msm_host->axi_clk = devm_clk_get(dev, "bus_clk");
-	if (IS_ERR(msm_host->axi_clk)) {
-		ret = PTR_ERR(msm_host->axi_clk);
-		pr_err("%s: Unable to get axi bus clk. ret=%d\n",
-			__func__, ret);
-		goto exit;
-	}
-
-	msm_host->mmss_misc_ahb_clk = devm_clk_get(dev, "core_mmss_clk");
-	if (IS_ERR(msm_host->mmss_misc_ahb_clk)) {
-		ret = PTR_ERR(msm_host->mmss_misc_ahb_clk);
-		pr_err("%s: Unable to get mmss misc ahb clk. ret=%d\n",
-			__func__, ret);
-		goto exit;
+	const struct msm_dsi_config *cfg = msm_host->cfg_hnd->cfg;
+	int i, ret = 0;
+
+	/* get bus clocks */
+	for (i = 0; i < cfg->num_bus_clks; i++) {
+		msm_host->bus_clks[i] = devm_clk_get(dev,
+						cfg->bus_clk_names[i]);
+		if (IS_ERR(msm_host->bus_clks[i])) {
+			ret = PTR_ERR(msm_host->bus_clks[i]);
+			pr_err("%s: Unable to get %s, ret = %d\n",
+				__func__, cfg->bus_clk_names[i], ret);
+			goto exit;
+		}
 	}
 
+	/* get link and source clocks */
 	msm_host->byte_clk = devm_clk_get(dev, "byte_clk");
 	if (IS_ERR(msm_host->byte_clk)) {
 		ret = PTR_ERR(msm_host->byte_clk);
@@ -402,55 +383,37 @@ exit:
 
 static int dsi_bus_clk_enable(struct msm_dsi_host *msm_host)
 {
-	int ret;
+	const struct msm_dsi_config *cfg = msm_host->cfg_hnd->cfg;
+	int i, ret;
 
 	DBG("id=%d", msm_host->id);
 
-	ret = clk_prepare_enable(msm_host->mdp_core_clk);
-	if (ret) {
-		pr_err("%s: failed to enable mdp_core_clock, %d\n",
-							 __func__, ret);
-		goto core_clk_err;
-	}
-
-	ret = clk_prepare_enable(msm_host->ahb_clk);
-	if (ret) {
-		pr_err("%s: failed to enable ahb clock, %d\n", __func__, ret);
-		goto ahb_clk_err;
-	}
-
-	ret = clk_prepare_enable(msm_host->axi_clk);
-	if (ret) {
-		pr_err("%s: failed to enable ahb clock, %d\n", __func__, ret);
-		goto axi_clk_err;
-	}
-
-	ret = clk_prepare_enable(msm_host->mmss_misc_ahb_clk);
-	if (ret) {
-		pr_err("%s: failed to enable mmss misc ahb clk, %d\n",
-			__func__, ret);
-		goto misc_ahb_clk_err;
+	for (i = 0; i < cfg->num_bus_clks; i++) {
+		ret = clk_prepare_enable(msm_host->bus_clks[i]);
+		if (ret) {
+			pr_err("%s: failed to enable bus clock %d ret %d\n",
+				__func__, i, ret);
+			goto err;
+		}
 	}
 
 	return 0;
+err:
+	for (; i > 0; i--)
+		clk_disable_unprepare(msm_host->bus_clks[i]);
 
-misc_ahb_clk_err:
-	clk_disable_unprepare(msm_host->axi_clk);
-axi_clk_err:
-	clk_disable_unprepare(msm_host->ahb_clk);
-ahb_clk_err:
-	clk_disable_unprepare(msm_host->mdp_core_clk);
-core_clk_err:
 	return ret;
 }
 
 static void dsi_bus_clk_disable(struct msm_dsi_host *msm_host)
 {
+	const struct msm_dsi_config *cfg = msm_host->cfg_hnd->cfg;
+	int i;
+
 	DBG("");
-	clk_disable_unprepare(msm_host->mmss_misc_ahb_clk);
-	clk_disable_unprepare(msm_host->axi_clk);
-	clk_disable_unprepare(msm_host->ahb_clk);
-	clk_disable_unprepare(msm_host->mdp_core_clk);
+
+	for (i = cfg->num_bus_clks - 1; i >= 0; i--)
+		clk_disable_unprepare(msm_host->bus_clks[i]);
 }
 
 static int dsi_link_clk_enable(struct msm_dsi_host *msm_host)
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

[PATCH v2 06/10] drm/msm/dsi: Set up link clocks for DSIv2

[Archit Taneja]

DSIv2 (DSI on older A family chips) has slightly different link clock
requirements.

First, we have an extra clock called src_clk (with a dedicated RCG).
This is required by the DSI controller to process the pixel data
coming from MDP. It needs to be set at the rate "pclk * bytes_per_pixel".

We also need to explicitly configure esc_clk. On DSI6G chips, we don't
need to set a rate to esc_clk because its RCG is always sourced from
crystal clock (19.2 Mhz in all cases), which is within the escape clock
frequency range in the mipi DSI spec. For chips with DSIv2, the crystal
clock rate may not be within the required range (27Mhz on APQ8064).
Therefore, we derive it from the DSI byte clock. We calculate an esc_clck
rate that is within the mipi spec and also divisible by the byte clock
rate.

When setting rate and enabling the link clocks, we make sure that byte_clk
is configured before esc_clk, and src_clk before pixel_clk. We create two
different link_enable funcs for DSI6G and DSIv2 since the sequences are
different.

We also obtain two extra source clocks (dsi_src_clk and esc_src_clk) and
set their parent to the clocks provided by DSI PLL.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 193 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 188 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 1da9adb2..6665371 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -113,6 +113,14 @@ struct msm_dsi_host {
 	struct clk *pixel_clk_src;
 
 	u32 byte_clk_rate;
+	u32 esc_clk_rate;
+
+	/* DSI v2 specific clocks */
+	struct clk *src_clk;
+	struct clk *esc_clk_src;
+	struct clk *dsi_clk_src;
+
+	u32 src_clk_rate;
 
 	struct gpio_desc *disp_en_gpio;
 	struct gpio_desc *te_gpio;
@@ -318,7 +326,8 @@ static int dsi_regulator_init(struct msm_dsi_host *msm_host)
 static int dsi_clk_init(struct msm_dsi_host *msm_host)
 {
 	struct device *dev = &msm_host->pdev->dev;
-	const struct msm_dsi_config *cfg = msm_host->cfg_hnd->cfg;
+	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
+	const struct msm_dsi_config *cfg = cfg_hnd->cfg;
 	int i, ret = 0;
 
 	/* get bus clocks */
@@ -377,6 +386,34 @@ static int dsi_clk_init(struct msm_dsi_host *msm_host)
 		goto exit;
 	}
 
+	if (cfg_hnd->major == MSM_DSI_VER_MAJOR_V2) {
+		msm_host->src_clk = devm_clk_get(dev, "src_clk");
+		if (IS_ERR(msm_host->src_clk)) {
+			ret = PTR_ERR(msm_host->src_clk);
+			pr_err("%s: can't find dsi_src_clk. ret=%d\n",
+				__func__, ret);
+			msm_host->src_clk = NULL;
+			goto exit;
+		}
+
+		msm_host->esc_clk_src = devm_clk_get(dev, "esc_clk_src");
+		if (IS_ERR(msm_host->esc_clk_src)) {
+			ret = PTR_ERR(msm_host->esc_clk_src);
+			pr_err("%s: can't find esc_clk_src. ret=%d\n",
+				__func__, ret);
+			msm_host->esc_clk_src = NULL;
+			goto exit;
+		}
+
+		msm_host->dsi_clk_src = devm_clk_get(dev, "dsi_clk_src");
+		if (IS_ERR(msm_host->dsi_clk_src)) {
+			ret = PTR_ERR(msm_host->dsi_clk_src);
+			pr_err("%s: can't find dsi_clk_src. ret=%d\n",
+				__func__, ret);
+			msm_host->dsi_clk_src = NULL;
+			goto exit;
+		}
+	}
 exit:
 	return ret;
 }
@@ -416,7 +453,7 @@ static void dsi_bus_clk_disable(struct msm_dsi_host *msm_host)
 		clk_disable_unprepare(msm_host->bus_clks[i]);
 }
 
-static int dsi_link_clk_enable(struct msm_dsi_host *msm_host)
+static int dsi_link_clk_enable_6g(struct msm_dsi_host *msm_host)
 {
 	int ret;
 
@@ -463,11 +500,98 @@ error:
 	return ret;
 }
 
-static void dsi_link_clk_disable(struct msm_dsi_host *msm_host)
+static int dsi_link_clk_enable_v2(struct msm_dsi_host *msm_host)
 {
+	int ret;
+
+	DBG("Set clk rates: pclk=%d, byteclk=%d, esc_clk=%d, dsi_src_clk=%d",
+		msm_host->mode->clock, msm_host->byte_clk_rate,
+		msm_host->esc_clk_rate, msm_host->src_clk_rate);
+
+	ret = clk_set_rate(msm_host->byte_clk, msm_host->byte_clk_rate);
+	if (ret) {
+		pr_err("%s: Failed to set rate byte clk, %d\n", __func__, ret);
+		goto error;
+	}
+
+	ret = clk_set_rate(msm_host->esc_clk, msm_host->esc_clk_rate);
+	if (ret) {
+		pr_err("%s: Failed to set rate esc clk, %d\n", __func__, ret);
+		goto error;
+	}
+
+	ret = clk_set_rate(msm_host->src_clk, msm_host->src_clk_rate);
+	if (ret) {
+		pr_err("%s: Failed to set rate src clk, %d\n", __func__, ret);
+		goto error;
+	}
+
+	ret = clk_set_rate(msm_host->pixel_clk, msm_host->mode->clock * 1000);
+	if (ret) {
+		pr_err("%s: Failed to set rate pixel clk, %d\n", __func__, ret);
+		goto error;
+	}
+
+	ret = clk_prepare_enable(msm_host->byte_clk);
+	if (ret) {
+		pr_err("%s: Failed to enable dsi byte clk\n", __func__);
+		goto error;
+	}
+
+	ret = clk_prepare_enable(msm_host->esc_clk);
+	if (ret) {
+		pr_err("%s: Failed to enable dsi esc clk\n", __func__);
+		goto esc_clk_err;
+	}
+
+	ret = clk_prepare_enable(msm_host->src_clk);
+	if (ret) {
+		pr_err("%s: Failed to enable dsi src clk\n", __func__);
+		goto src_clk_err;
+	}
+
+	ret = clk_prepare_enable(msm_host->pixel_clk);
+	if (ret) {
+		pr_err("%s: Failed to enable dsi pixel clk\n", __func__);
+		goto pixel_clk_err;
+	}
+
+	return 0;
+
+pixel_clk_err:
+	clk_disable_unprepare(msm_host->src_clk);
+src_clk_err:
 	clk_disable_unprepare(msm_host->esc_clk);
-	clk_disable_unprepare(msm_host->pixel_clk);
+esc_clk_err:
 	clk_disable_unprepare(msm_host->byte_clk);
+error:
+	return ret;
+}
+
+static int dsi_link_clk_enable(struct msm_dsi_host *msm_host)
+{
+	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
+
+	if (cfg_hnd->major == MSM_DSI_VER_MAJOR_6G)
+		return dsi_link_clk_enable_6g(msm_host);
+	else
+		return dsi_link_clk_enable_v2(msm_host);
+}
+
+static void dsi_link_clk_disable(struct msm_dsi_host *msm_host)
+{
+	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
+
+	if (cfg_hnd->major == MSM_DSI_VER_MAJOR_6G) {
+		clk_disable_unprepare(msm_host->esc_clk);
+		clk_disable_unprepare(msm_host->pixel_clk);
+		clk_disable_unprepare(msm_host->byte_clk);
+	} else {
+		clk_disable_unprepare(msm_host->pixel_clk);
+		clk_disable_unprepare(msm_host->src_clk);
+		clk_disable_unprepare(msm_host->esc_clk);
+		clk_disable_unprepare(msm_host->byte_clk);
+	}
 }
 
 static int dsi_clk_ctrl(struct msm_dsi_host *msm_host, bool enable)
@@ -502,6 +626,7 @@ unlock_ret:
 static int dsi_calc_clk_rate(struct msm_dsi_host *msm_host)
 {
 	struct drm_display_mode *mode = msm_host->mode;
+	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
 	u8 lanes = msm_host->lanes;
 	u32 bpp = dsi_get_bpp(msm_host->format);
 	u32 pclk_rate;
@@ -521,6 +646,47 @@ static int dsi_calc_clk_rate(struct msm_dsi_host *msm_host)
 
 	DBG("pclk=%d, bclk=%d", pclk_rate, msm_host->byte_clk_rate);
 
+	msm_host->esc_clk_rate = clk_get_rate(msm_host->esc_clk);
+
+	if (cfg_hnd->major == MSM_DSI_VER_MAJOR_V2) {
+		unsigned int esc_mhz, esc_div;
+		unsigned long byte_mhz;
+
+		msm_host->src_clk_rate = (pclk_rate * bpp) / 8;
+
+		/*
+		 * esc clock is byte clock followed by a 4 bit divider,
+		 * we need to find an escape clock frequency within the
+		 * mipi DSI spec range within the maximum divider limit
+		 * We iterate here between an escape clock frequencey
+		 * between 20 Mhz to 5 Mhz and pick up the first one
+		 * that can be supported by our divider
+		 */
+
+		byte_mhz = msm_host->byte_clk_rate / 1000000;
+
+		for (esc_mhz = 20; esc_mhz >= 5; esc_mhz--) {
+			esc_div = DIV_ROUND_UP(byte_mhz, esc_mhz);
+
+			/*
+			 * TODO: Ideally, we shouldn't know what sort of divider
+			 * is available in mmss_cc, we're just assuming that
+			 * it'll always be a 4 bit divider. Need to come up with
+			 * a better way here.
+			 */
+			if (esc_div >= 1 && esc_div <= 16)
+				break;
+		}
+
+		if (esc_mhz < 5)
+			return -EINVAL;
+
+		msm_host->esc_clk_rate = msm_host->byte_clk_rate / esc_div;
+
+		DBG("esc=%d, src=%d", msm_host->esc_clk_rate,
+			msm_host->src_clk_rate);
+	}
+
 	return 0;
 }
 
@@ -1753,6 +1919,7 @@ int msm_dsi_host_set_src_pll(struct mipi_dsi_host *host,
 	struct msm_dsi_pll *src_pll)
 {
 	struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
+	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
 	struct clk *byte_clk_provider, *pixel_clk_provider;
 	int ret;
 
@@ -1778,6 +1945,22 @@ int msm_dsi_host_set_src_pll(struct mipi_dsi_host *host,
 		goto exit;
 	}
 
+	if (cfg_hnd->major == MSM_DSI_VER_MAJOR_V2) {
+		ret = clk_set_parent(msm_host->dsi_clk_src, pixel_clk_provider);
+		if (ret) {
+			pr_err("%s: can't set parent to dsi_clk_src. ret=%d\n",
+				__func__, ret);
+			goto exit;
+		}
+
+		ret = clk_set_parent(msm_host->esc_clk_src, byte_clk_provider);
+		if (ret) {
+			pr_err("%s: can't set parent to esc_clk_src. ret=%d\n",
+				__func__, ret);
+			goto exit;
+		}
+	}
+
 exit:
 	return ret;
 }
@@ -1849,7 +2032,7 @@ int msm_dsi_host_power_on(struct mipi_dsi_host *host)
 	dsi_phy_sw_reset(msm_host);
 	ret = msm_dsi_manager_phy_enable(msm_host->id,
 					msm_host->byte_clk_rate * 8,
-					clk_get_rate(msm_host->esc_clk),
+					msm_host->esc_clk_rate,
 					&clk_pre, &clk_post);
 	dsi_bus_clk_disable(msm_host);
 	if (ret) {
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

[PATCH v2 07/10] drm/msm/dsi: Add dsi_cfg for APQ8064

[Archit Taneja]

Add a dsi_cfg entry for APQ8064. Since this is the first DSIv2 chip to
be supported, add a list of bus clocks that are required by the DSIv2
block.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/dsi_cfg.c | 19 ++++++++++++++++---
 drivers/gpu/drm/msm/dsi/dsi_cfg.h |  2 ++
 2 files changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.c b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
index c40044f..2a827d8 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
@@ -13,9 +13,22 @@
 
 #include "dsi_cfg.h"
 
-/* DSI v2 has not been supported by now */
-static const struct msm_dsi_config dsi_v2_cfg = {
+static const char * const dsi_v2_bus_clk_names[] = {
+	"core_mmss_clk", "iface_clk", "bus_clk",
+};
+
+static const struct msm_dsi_config apq8064_dsi_cfg = {
 	.io_offset = 0,
+	.reg_cfg = {
+		.num = 3,
+		.regs = {
+			{"vdda", 1200000, 1200000, 100000, 100},
+			{"avdd", 3000000, 3000000, 110000, 100},
+			{"vddio", 1800000, 1800000, 100000, 100},
+		},
+	},
+	.bus_clk_names = dsi_v2_bus_clk_names,
+	.num_bus_clks = ARRAY_SIZE(dsi_v2_bus_clk_names),
 };
 
 static const char * const dsi_6g_bus_clk_names[] = {
@@ -75,7 +88,7 @@ static const struct msm_dsi_config msm8994_dsi_cfg = {
 };
 
 static const struct msm_dsi_cfg_handler dsi_cfg_handlers[] = {
-	{MSM_DSI_VER_MAJOR_V2, U32_MAX, &dsi_v2_cfg},
+	{MSM_DSI_VER_MAJOR_V2, MSM_DSI_V2_VER_MINOR_8064, &apq8064_dsi_cfg},
 	{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V1_0,
 						&msm8974_apq8084_dsi_cfg},
 	{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V1_1,
diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.h b/drivers/gpu/drm/msm/dsi/dsi_cfg.h
index 5a36836..a68c836 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.h
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.h
@@ -25,6 +25,8 @@
 #define MSM_DSI_6G_VER_MINOR_V1_3	0x10030000
 #define MSM_DSI_6G_VER_MINOR_V1_3_1	0x10030001
 
+#define MSM_DSI_V2_VER_MINOR_8064	0x0
+
 #define DSI_6G_REG_SHIFT	4
 
 struct msm_dsi_config {
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v2 08/10] drm/msm/dsi: Don't use iommu for command TX buffer for DSIv2

[Archit Taneja]

We currently use iommu allocated DMA buffers for sending DSI commands.
DSIv2 doesn't have a port connected to the MDP iommu. Therefore, it
can't use iommu allocated buffers to fetch DSI commands.

Use a regular contiguous DMA buffer if we are DSIv2.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/dsi.h         |   4 +-
 drivers/gpu/drm/msm/dsi/dsi_host.c    | 110 +++++++++++++++++++++++-----------
 drivers/gpu/drm/msm/dsi/dsi_manager.c |   6 +-
 3 files changed, 79 insertions(+), 41 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h
index 7336b55..749fbb2 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.h
+++ b/drivers/gpu/drm/msm/dsi/dsi.h
@@ -91,7 +91,7 @@ int msm_dsi_manager_phy_enable(int id,
 		u32 *clk_pre, u32 *clk_post);
 void msm_dsi_manager_phy_disable(int id);
 int msm_dsi_manager_cmd_xfer(int id, const struct mipi_dsi_msg *msg);
-bool msm_dsi_manager_cmd_xfer_trigger(int id, u32 iova, u32 len);
+bool msm_dsi_manager_cmd_xfer_trigger(int id, u32 dma_base, u32 len);
 int msm_dsi_manager_register(struct msm_dsi *msm_dsi);
 void msm_dsi_manager_unregister(struct msm_dsi *msm_dsi);
 
@@ -145,7 +145,7 @@ int msm_dsi_host_cmd_tx(struct mipi_dsi_host *host,
 int msm_dsi_host_cmd_rx(struct mipi_dsi_host *host,
 					const struct mipi_dsi_msg *msg);
 void msm_dsi_host_cmd_xfer_commit(struct mipi_dsi_host *host,
-					u32 iova, u32 len);
+					u32 dma_base, u32 len);
 int msm_dsi_host_enable(struct mipi_dsi_host *host);
 int msm_dsi_host_disable(struct mipi_dsi_host *host);
 int msm_dsi_host_power_on(struct mipi_dsi_host *host);
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 6665371..afc2546 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -138,7 +138,15 @@ struct msm_dsi_host {
 	struct work_struct err_work;
 	struct workqueue_struct *workqueue;
 
+	/* DSI 6G TX buffer*/
 	struct drm_gem_object *tx_gem_obj;
+
+	/* DSI v2 TX buffer */
+	void *tx_buf;
+	dma_addr_t tx_buf_paddr;
+
+	int tx_size;
+
 	u8 *rx_buf;
 
 	struct drm_display_mode *mode;
@@ -988,29 +996,46 @@ static void dsi_wait4video_eng_busy(struct msm_dsi_host *msm_host)
 static int dsi_tx_buf_alloc(struct msm_dsi_host *msm_host, int size)
 {
 	struct drm_device *dev = msm_host->dev;
+	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
 	int ret;
 	u32 iova;
 
-	mutex_lock(&dev->struct_mutex);
-	msm_host->tx_gem_obj = msm_gem_new(dev, size, MSM_BO_UNCACHED);
-	if (IS_ERR(msm_host->tx_gem_obj)) {
-		ret = PTR_ERR(msm_host->tx_gem_obj);
-		pr_err("%s: failed to allocate gem, %d\n", __func__, ret);
-		msm_host->tx_gem_obj = NULL;
+	if (cfg_hnd->major == MSM_DSI_VER_MAJOR_6G) {
+		mutex_lock(&dev->struct_mutex);
+		msm_host->tx_gem_obj = msm_gem_new(dev, size, MSM_BO_UNCACHED);
+		if (IS_ERR(msm_host->tx_gem_obj)) {
+			ret = PTR_ERR(msm_host->tx_gem_obj);
+			pr_err("%s: failed to allocate gem, %d\n",
+				__func__, ret);
+			msm_host->tx_gem_obj = NULL;
+			mutex_unlock(&dev->struct_mutex);
+			return ret;
+		}
+
+		ret = msm_gem_get_iova_locked(msm_host->tx_gem_obj, 0, &iova);
+		if (ret) {
+			pr_err("%s: failed to get iova, %d\n", __func__, ret);
+			return ret;
+		}
 		mutex_unlock(&dev->struct_mutex);
-		return ret;
-	}
 
-	ret = msm_gem_get_iova_locked(msm_host->tx_gem_obj, 0, &iova);
-	if (ret) {
-		pr_err("%s: failed to get iova, %d\n", __func__, ret);
-		return ret;
-	}
-	mutex_unlock(&dev->struct_mutex);
+		if (iova & 0x07) {
+			pr_err("%s: buf NOT 8 bytes aligned\n", __func__);
+			return -EINVAL;
+		}
 
-	if (iova & 0x07) {
-		pr_err("%s: buf NOT 8 bytes aligned\n", __func__);
-		return -EINVAL;
+		msm_host->tx_size = msm_host->tx_gem_obj->size;
+	} else {
+		msm_host->tx_buf = dma_alloc_coherent(dev->dev, size,
+					&msm_host->tx_buf_paddr, GFP_KERNEL);
+		if (!msm_host->tx_buf) {
+			ret = -ENOMEM;
+			pr_err("%s: failed to allocate tx buf, %d\n",
+				__func__, ret);
+			return ret;
+		}
+
+		msm_host->tx_size = size;
 	}
 
 	return 0;
@@ -1027,14 +1052,19 @@ static void dsi_tx_buf_free(struct msm_dsi_host *msm_host)
 		msm_host->tx_gem_obj = NULL;
 		mutex_unlock(&dev->struct_mutex);
 	}
+
+	if (msm_host->tx_buf)
+		dma_free_coherent(dev->dev, msm_host->tx_size, msm_host->tx_buf,
+			msm_host->tx_buf_paddr);
 }
 
 /*
  * prepare cmd buffer to be txed
  */
-static int dsi_cmd_dma_add(struct drm_gem_object *tx_gem,
-			const struct mipi_dsi_msg *msg)
+static int dsi_cmd_dma_add(struct msm_dsi_host *msm_host,
+			   const struct mipi_dsi_msg *msg)
 {
+	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
 	struct mipi_dsi_packet packet;
 	int len;
 	int ret;
@@ -1047,17 +1077,20 @@ static int dsi_cmd_dma_add(struct drm_gem_object *tx_gem,
 	}
 	len = (packet.size + 3) & (~0x3);
 
-	if (len > tx_gem->size) {
+	if (len > msm_host->tx_size) {
 		pr_err("%s: packet size is too big\n", __func__);
 		return -EINVAL;
 	}
 
-	data = msm_gem_vaddr(tx_gem);
-
-	if (IS_ERR(data)) {
-		ret = PTR_ERR(data);
-		pr_err("%s: get vaddr failed, %d\n", __func__, ret);
-		return ret;
+	if (cfg_hnd->major == MSM_DSI_VER_MAJOR_6G) {
+		data = msm_gem_vaddr(msm_host->tx_gem_obj);
+		if (IS_ERR(data)) {
+			ret = PTR_ERR(data);
+			pr_err("%s: get vaddr failed, %d\n", __func__, ret);
+			return ret;
+		}
+	} else {
+		data = msm_host->tx_buf;
 	}
 
 	/* MSM specific command format in memory */
@@ -1123,17 +1156,21 @@ static int dsi_long_read_resp(u8 *buf, const struct mipi_dsi_msg *msg)
 	return msg->rx_len;
 }
 
-
 static int dsi_cmd_dma_tx(struct msm_dsi_host *msm_host, int len)
 {
+	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
 	int ret;
-	u32 iova;
+	u32 dma_base;
 	bool triggered;
 
-	ret = msm_gem_get_iova(msm_host->tx_gem_obj, 0, &iova);
-	if (ret) {
-		pr_err("%s: failed to get iova: %d\n", __func__, ret);
-		return ret;
+	if (cfg_hnd->major == MSM_DSI_VER_MAJOR_6G) {
+		ret = msm_gem_get_iova(msm_host->tx_gem_obj, 0, &dma_base);
+		if (ret) {
+			pr_err("%s: failed to get iova: %d\n", __func__, ret);
+			return ret;
+		}
+	} else {
+		dma_base = msm_host->tx_buf_paddr;
 	}
 
 	reinit_completion(&msm_host->dma_comp);
@@ -1141,7 +1178,7 @@ static int dsi_cmd_dma_tx(struct msm_dsi_host *msm_host, int len)
 	dsi_wait4video_eng_busy(msm_host);
 
 	triggered = msm_dsi_manager_cmd_xfer_trigger(
-						msm_host->id, iova, len);
+						msm_host->id, dma_base, len);
 	if (triggered) {
 		ret = wait_for_completion_timeout(&msm_host->dma_comp,
 					msecs_to_jiffies(200));
@@ -1213,7 +1250,7 @@ static int dsi_cmds2buf_tx(struct msm_dsi_host *msm_host,
 	int bllp_len = msm_host->mode->hdisplay *
 			dsi_get_bpp(msm_host->format) / 8;
 
-	len = dsi_cmd_dma_add(msm_host->tx_gem_obj, msg);
+	len = dsi_cmd_dma_add(msm_host, msg);
 	if (!len) {
 		pr_err("%s: failed to add cmd type = 0x%x\n",
 			__func__,  msg->type);
@@ -1903,11 +1940,12 @@ int msm_dsi_host_cmd_rx(struct mipi_dsi_host *host,
 	return ret;
 }
 
-void msm_dsi_host_cmd_xfer_commit(struct mipi_dsi_host *host, u32 iova, u32 len)
+void msm_dsi_host_cmd_xfer_commit(struct mipi_dsi_host *host, u32 dma_base,
+				  u32 len)
 {
 	struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
 
-	dsi_write(msm_host, REG_DSI_DMA_BASE, iova);
+	dsi_write(msm_host, REG_DSI_DMA_BASE, dma_base);
 	dsi_write(msm_host, REG_DSI_DMA_LEN, len);
 	dsi_write(msm_host, REG_DSI_TRIG_DMA, 1);
 
diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c
index 0455ff7..58ba7ec 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_manager.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c
@@ -774,7 +774,7 @@ restore_host0:
 	return ret;
 }
 
-bool msm_dsi_manager_cmd_xfer_trigger(int id, u32 iova, u32 len)
+bool msm_dsi_manager_cmd_xfer_trigger(int id, u32 dma_base, u32 len)
 {
 	struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
 	struct msm_dsi *msm_dsi0 = dsi_mgr_get_dsi(DSI_0);
@@ -784,9 +784,9 @@ bool msm_dsi_manager_cmd_xfer_trigger(int id, u32 iova, u32 len)
 		return false;
 
 	if (IS_SYNC_NEEDED() && msm_dsi0)
-		msm_dsi_host_cmd_xfer_commit(msm_dsi0->host, iova, len);
+		msm_dsi_host_cmd_xfer_commit(msm_dsi0->host, dma_base, len);
 
-	msm_dsi_host_cmd_xfer_commit(host, iova, len);
+	msm_dsi_host_cmd_xfer_commit(host, dma_base, len);
 
 	return true;
 }
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v2 09/10] drm/msm/dsi: Enable MMSS SPFB port via syscon

[Archit Taneja]

For DSIv2 to work, we need to enable MMSS_AHB_ARB_MASTER_PORT in
MMSS_SFPB. We enable the required bitfield by retrieving MMSS_SFPB
regmap pointer via syscon.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index afc2546..7a71f11 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -24,10 +24,13 @@
 #include <linux/of_graph.h>
 #include <linux/regulator/consumer.h>
 #include <linux/spinlock.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 #include <video/mipi_display.h>
 
 #include "dsi.h"
 #include "dsi.xml.h"
+#include "sfpb.xml.h"
 #include "dsi_cfg.h"
 
 static int dsi_get_version(const void __iomem *base, u32 *major, u32 *minor)
@@ -149,6 +152,8 @@ struct msm_dsi_host {
 
 	u8 *rx_buf;
 
+	struct regmap *sfpb;
+
 	struct drm_display_mode *mode;
 
 	/* connected device info */
@@ -1573,6 +1578,16 @@ static int dsi_host_parse_dt(struct msm_dsi_host *msm_host)
 
 	msm_host->device_node = device_node;
 
+	if (of_property_read_bool(np, "syscon-sfpb")) {
+		msm_host->sfpb = syscon_regmap_lookup_by_phandle(np,
+					"syscon-sfpb");
+		if (IS_ERR(msm_host->sfpb)) {
+			dev_err(dev, "%s: failed to get sfpb regmap\n",
+				__func__);
+			return PTR_ERR(msm_host->sfpb);
+		}
+	}
+
 	return 0;
 }
 
@@ -2036,6 +2051,20 @@ int msm_dsi_host_disable(struct mipi_dsi_host *host)
 	return 0;
 }
 
+static void msm_dsi_sfpb_config(struct msm_dsi_host *msm_host, bool enable)
+{
+	enum sfpb_ahb_arb_master_port_en en;
+
+	if (!msm_host->sfpb)
+		return;
+
+	en = enable ? SFPB_MASTER_PORT_ENABLE : SFPB_MASTER_PORT_DISABLE;
+
+	regmap_update_bits(msm_host->sfpb, REG_SFPB_GPREG,
+			SFPB_GPREG_MASTER_PORT_EN__MASK,
+			SFPB_GPREG_MASTER_PORT_EN(en));
+}
+
 int msm_dsi_host_power_on(struct mipi_dsi_host *host)
 {
 	struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
@@ -2048,6 +2077,8 @@ int msm_dsi_host_power_on(struct mipi_dsi_host *host)
 		goto unlock_ret;
 	}
 
+	msm_dsi_sfpb_config(msm_host, true);
+
 	ret = dsi_calc_clk_rate(msm_host);
 	if (ret) {
 		pr_err("%s: unable to calc clk rate, %d\n", __func__, ret);
@@ -2135,6 +2166,8 @@ int msm_dsi_host_power_off(struct mipi_dsi_host *host)
 
 	dsi_host_regulator_disable(msm_host);
 
+	msm_dsi_sfpb_config(msm_host, false);
+
 	DBG("-");
 
 	msm_host->power_on = false;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

[PATCH v2 10/10] dt-bindings: Add DSIv2 documentation

[Archit Taneja]

Add additional property info needed for DSIv2 DT.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 Documentation/devicetree/bindings/display/msm/dsi.txt | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index f344b9e..ca65a34 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -13,18 +13,25 @@ Required properties:
 - power-domains: Should be <&mmcc MDSS_GDSC>.
 - clocks: device clocks
   See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
-- clock-names: the following clocks are required:
+- clock-names: these vary based on the DSI version. For DSI6G:
   * "bus_clk"
   * "byte_clk"
+  * "byte_clk_src
   * "core_clk"
   * "core_mmss_clk"
   * "iface_clk"
   * "mdp_core_clk"
   * "pixel_clk"
+  * "pixel_clk_src"
+  For DSIv2, we need a few more:
+   * "dsi_clk_src"
+   * "esc_clk_src"
+   * "src_clk"
 - vdd-supply: phandle to vdd regulator device node
 - vddio-supply: phandle to vdd-io regulator device node
 - vdda-supply: phandle to vdda regulator device node
 - qcom,dsi-phy: phandle to DSI PHY device node
+- syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2)
 
 Optional properties:
 - panel@0: Node of panel connected to this DSI controller.
@@ -51,6 +58,7 @@ Required properties:
   * "qcom,dsi-phy-28nm-hpm"
   * "qcom,dsi-phy-28nm-lp"
   * "qcom,dsi-phy-20nm"
+  * "qcom,dsi-phy-28nm-8960"
 - reg: Physical base address and length of the registers of PLL, PHY and PHY
   regulator
 - reg-names: The names of register regions. The following regions are required:
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

Re: [PATCH v2 10/10] dt-bindings: Add DSIv2 documentation

[Rob Herring]

+dt list

On Wed, Nov 18, 2015 at 4:55 AM, Archit Taneja <architt@codeaurora.org> wrote:
> Add additional property info needed for DSIv2 DT.

Please use get_maintainers.pl.

> Signed-off-by: Archit Taneja <architt@codeaurora.org>
> ---
>  Documentation/devicetree/bindings/display/msm/dsi.txt | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
> index f344b9e..ca65a34 100644
> --- a/Documentation/devicetree/bindings/display/msm/dsi.txt
> +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
> @@ -13,18 +13,25 @@ Required properties:
>  - power-domains: Should be <&mmcc MDSS_GDSC>.
>  - clocks: device clocks
>    See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
> -- clock-names: the following clocks are required:
> +- clock-names: these vary based on the DSI version. For DSI6G:
>    * "bus_clk"
>    * "byte_clk"
> +  * "byte_clk_src

This sounds like the parent of byte_clk. Is that really a clock within
the block?

>    * "core_clk"
>    * "core_mmss_clk"
>    * "iface_clk"
>    * "mdp_core_clk"
>    * "pixel_clk"
> +  * "pixel_clk_src"
> +  For DSIv2, we need a few more:

What is the overall order of clocks? As listed?

> +   * "dsi_clk_src"
> +   * "esc_clk_src"
> +   * "src_clk"
>  - vdd-supply: phandle to vdd regulator device node
>  - vddio-supply: phandle to vdd-io regulator device node
>  - vdda-supply: phandle to vdda regulator device node
>  - qcom,dsi-phy: phandle to DSI PHY device node
> +- syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2)
>
>  Optional properties:
>  - panel@0: Node of panel connected to this DSI controller.
> @@ -51,6 +58,7 @@ Required properties:
>    * "qcom,dsi-phy-28nm-hpm"
>    * "qcom,dsi-phy-28nm-lp"
>    * "qcom,dsi-phy-20nm"
> +  * "qcom,dsi-phy-28nm-8960"
>  - reg: Physical base address and length of the registers of PLL, PHY and PHY
>    regulator
>  - reg-names: The names of register regions. The following regions are required:
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> hosted by The Linux Foundation
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 10/10] dt-bindings: Add DSIv2 documentation

[Archit Taneja]

Hi Rob,

On 11/18/2015 6:48 PM, Rob Herring wrote:
> +dt list
>
> On Wed, Nov 18, 2015 at 4:55 AM, Archit Taneja <architt@codeaurora.org> wrote:
>> Add additional property info needed for DSIv2 DT.
>
> Please use get_maintainers.pl.

Sorry about that, missed out doing that posting this time.

>
>> Signed-off-by: Archit Taneja <architt@codeaurora.org>
>> ---
>>   Documentation/devicetree/bindings/display/msm/dsi.txt | 10 +++++++++-
>>   1 file changed, 9 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
>> index f344b9e..ca65a34 100644
>> --- a/Documentation/devicetree/bindings/display/msm/dsi.txt
>> +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
>> @@ -13,18 +13,25 @@ Required properties:
>>   - power-domains: Should be <&mmcc MDSS_GDSC>.
>>   - clocks: device clocks
>>     See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
>> -- clock-names: the following clocks are required:
>> +- clock-names: these vary based on the DSI version. For DSI6G:
>>     * "bus_clk"
>>     * "byte_clk"
>> +  * "byte_clk_src
>
> This sounds like the parent of byte_clk. Is that really a clock within
> the block?

byte_clk_src isn't in the block, but byte_clk_src's parent is one of
the PLLs in this block. We take this clock so that we can re-parent
it to an appropriate PLL. The decision of what PLL to choose needs to
be done by the DSI block's driver.

>
>>     * "core_clk"
>>     * "core_mmss_clk"
>>     * "iface_clk"
>>     * "mdp_core_clk"
>>     * "pixel_clk"
>> +  * "pixel_clk_src"
>> +  For DSIv2, we need a few more:
>
> What is the overall order of clocks? As listed?

Order in which the driver does clk_get? It uses the clock
name to get each one individually, so the order doesn't matter
as such.

I don't think it the order of clk_get in the driver is the same
as what's been listed here. I can fix it if that's the norm.

Thanks,
Archit

>
>> +   * "dsi_clk_src"
>> +   * "esc_clk_src"
>> +   * "src_clk"
>>   - vdd-supply: phandle to vdd regulator device node
>>   - vddio-supply: phandle to vdd-io regulator device node
>>   - vdda-supply: phandle to vdda regulator device node
>>   - qcom,dsi-phy: phandle to DSI PHY device node
>> +- syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2)
>>
>>   Optional properties:
>>   - panel@0: Node of panel connected to this DSI controller.
>> @@ -51,6 +58,7 @@ Required properties:
>>     * "qcom,dsi-phy-28nm-hpm"
>>     * "qcom,dsi-phy-28nm-lp"
>>     * "qcom,dsi-phy-20nm"
>> +  * "qcom,dsi-phy-28nm-8960"
>>   - reg: Physical base address and length of the registers of PLL, PHY and PHY
>>     regulator
>>   - reg-names: The names of register regions. The following regions are required:
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
>> hosted by The Linux Foundation
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 10/10] dt-bindings: Add DSIv2 documentation

[Rob Herring]

+Stephen

On Wed, Nov 18, 2015 at 9:24 AM, Archit Taneja <architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> wrote:
> Hi Rob,
>
> On 11/18/2015 6:48 PM, Rob Herring wrote:
>>
>> +dt list
>>
>> On Wed, Nov 18, 2015 at 4:55 AM, Archit Taneja <architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
>> wrote:
>>>
>>> Add additional property info needed for DSIv2 DT.
>>
>>
>> Please use get_maintainers.pl.
>
>
> Sorry about that, missed out doing that posting this time.
>
>>
>>> Signed-off-by: Archit Taneja <architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
>>> ---
>>>   Documentation/devicetree/bindings/display/msm/dsi.txt | 10 +++++++++-
>>>   1 file changed, 9 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt
>>> b/Documentation/devicetree/bindings/display/msm/dsi.txt
>>> index f344b9e..ca65a34 100644
>>> --- a/Documentation/devicetree/bindings/display/msm/dsi.txt
>>> +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
>>> @@ -13,18 +13,25 @@ Required properties:
>>>   - power-domains: Should be <&mmcc MDSS_GDSC>.
>>>   - clocks: device clocks
>>>     See Documentation/devicetree/bindings/clocks/clock-bindings.txt for
>>> details.
>>> -- clock-names: the following clocks are required:
>>> +- clock-names: these vary based on the DSI version. For DSI6G:
>>>     * "bus_clk"
>>>     * "byte_clk"
>>> +  * "byte_clk_src
>>
>>
>> This sounds like the parent of byte_clk. Is that really a clock within
>> the block?
>
>
> byte_clk_src isn't in the block, but byte_clk_src's parent is one of
> the PLLs in this block. We take this clock so that we can re-parent
> it to an appropriate PLL. The decision of what PLL to choose needs to
> be done by the DSI block's driver.

Seems like abuse to me. The list of clocks should match what are
inputs to the block, not what the driver happens to need. Without a
full understanding of the clock tree here, I don't have a suggestion.
Maybe Stephen does.

>>>     * "core_clk"
>>>     * "core_mmss_clk"
>>>     * "iface_clk"
>>>     * "mdp_core_clk"
>>>     * "pixel_clk"
>>> +  * "pixel_clk_src"
>>> +  For DSIv2, we need a few more:
>>
>>
>> What is the overall order of clocks? As listed?
>
>
> Order in which the driver does clk_get? It uses the clock
> name to get each one individually, so the order doesn't matter
> as such.

The order in DT. You may use the names, but the order should still be specified.

Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 10/10] dt-bindings: Add DSIv2 documentation

[Archit Taneja]

On 11/21/2015 1:29 AM, Rob Herring wrote:
> +Stephen
>
> On Wed, Nov 18, 2015 at 9:24 AM, Archit Taneja <architt@codeaurora.org> wrote:
>> Hi Rob,
>>
>> On 11/18/2015 6:48 PM, Rob Herring wrote:
>>>
>>> +dt list
>>>
>>> On Wed, Nov 18, 2015 at 4:55 AM, Archit Taneja <architt@codeaurora.org>
>>> wrote:
>>>>
>>>> Add additional property info needed for DSIv2 DT.
>>>
>>>
>>> Please use get_maintainers.pl.
>>
>>
>> Sorry about that, missed out doing that posting this time.
>>
>>>
>>>> Signed-off-by: Archit Taneja <architt@codeaurora.org>
>>>> ---
>>>>    Documentation/devicetree/bindings/display/msm/dsi.txt | 10 +++++++++-
>>>>    1 file changed, 9 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt
>>>> b/Documentation/devicetree/bindings/display/msm/dsi.txt
>>>> index f344b9e..ca65a34 100644
>>>> --- a/Documentation/devicetree/bindings/display/msm/dsi.txt
>>>> +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
>>>> @@ -13,18 +13,25 @@ Required properties:
>>>>    - power-domains: Should be <&mmcc MDSS_GDSC>.
>>>>    - clocks: device clocks
>>>>      See Documentation/devicetree/bindings/clocks/clock-bindings.txt for
>>>> details.
>>>> -- clock-names: the following clocks are required:
>>>> +- clock-names: these vary based on the DSI version. For DSI6G:
>>>>      * "bus_clk"
>>>>      * "byte_clk"
>>>> +  * "byte_clk_src
>>>
>>>
>>> This sounds like the parent of byte_clk. Is that really a clock within
>>> the block?
>>
>>
>> byte_clk_src isn't in the block, but byte_clk_src's parent is one of
>> the PLLs in this block. We take this clock so that we can re-parent
>> it to an appropriate PLL. The decision of what PLL to choose needs to
>> be done by the DSI block's driver.
>
> Seems like abuse to me. The list of clocks should match what are
> inputs to the block, not what the driver happens to need. Without a
> full understanding of the clock tree here, I don't have a suggestion.
> Maybe Stephen does.

We don't need specify byte_clk_src (and other xyz_clk_src clocks) via
DT. There is a static link set up between byte_clk and byte_clk_src by
our clock driver that never changes. We can retrieve it in the driver
itself using clk_get_parent(byte_clk). This way we stick to only
input clocks.

Stephen, does that sound okay?

>
>>>>      * "core_clk"
>>>>      * "core_mmss_clk"
>>>>      * "iface_clk"
>>>>      * "mdp_core_clk"
>>>>      * "pixel_clk"
>>>> +  * "pixel_clk_src"
>>>> +  For DSIv2, we need a few more:
>>>
>>>
>>> What is the overall order of clocks? As listed?
>>
>>
>> Order in which the driver does clk_get? It uses the clock
>> name to get each one individually, so the order doesn't matter
>> as such.
>
> The order in DT. You may use the names, but the order should still be specified.

Okay. I'll cross check and make sure the order is as in our DT files.

Archit

>
> Rob
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 00/12] drm/msm/dsi: Add support for DSI on MSM8960/APQ8064

[Archit Taneja]

Add support for DSI on 8960/8064. The DSI IP used in these chips is an
older version(DSIv2) of what we have right now(DSI6G).

The bulk of the additions come thanks to a different PHY/PLL. The DSI
host in itself doesn't have too many changes.

Changes in v3:
- Add a patch that removes the need to provide source clocks (RCG clocks)
  via DT, as suggested by Rob Herring.
- Make cleaner dt-binding doc patches.

Changes in v2:
- Incorporated Stephen's comments for the DSI PLL patch.
- The dsi.xml.h and sfpb.xml.h changes were already picked up by Rob.
  Removed those patches.


Archit Taneja (12):
  drm/msm/dsi: Don't get byte/pixel source clocks from DT
  drm/msm/dsi: Add support for 28nm PHY on 8960
  drm/msm/dsi: Add DSI PLL for 28nm 8960 PHY
  drm/msm/dsi: Use a better way to figure out DSI version
  drm/msm/dsi: Delay dsi_clk_init
  drm/msm/dsi: Parse bus clocks from a list
  drm/msm/dsi: Set up link clocks for DSIv2
  drm/msm/dsi: Add dsi_cfg for APQ8064
  drm/msm/dsi: Don't use iommu for command TX buffer for DSIv2
  drm/msm/dsi: Enable MMSS SPFB port via syscon
  dt-bindings: msm/dsi: Fix the order in which clocks are listed
  dt-bindings: msm/dsi: Add DSIv2 documentation

 .../devicetree/bindings/display/msm/dsi.txt        |  12 +-
 drivers/gpu/drm/msm/Kconfig                        |   8 +
 drivers/gpu/drm/msm/Makefile                       |   2 +
 drivers/gpu/drm/msm/dsi/dsi.h                      |   6 +-
 drivers/gpu/drm/msm/dsi/dsi_cfg.c                  |  35 +-
 drivers/gpu/drm/msm/dsi/dsi_cfg.h                  |   4 +
 drivers/gpu/drm/msm/dsi/dsi_host.c                 | 508 ++++++++++++++------
 drivers/gpu/drm/msm/dsi/dsi_manager.c              |   6 +-
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c              |   4 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.h              |   1 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c    | 195 ++++++++
 drivers/gpu/drm/msm/dsi/pll/dsi_pll.c              |   3 +
 drivers/gpu/drm/msm/dsi/pll/dsi_pll.h              |  10 +
 drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c    | 533 +++++++++++++++++++++
 14 files changed, 1178 insertions(+), 149 deletions(-)
 create mode 100644 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
 create mode 100644 drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 01/12] drm/msm/dsi: Don't get byte/pixel source clocks from DT

[Archit Taneja]

We retrieve the byte and pixel source clocks (RCG clocks) in the dsi
driver via DT. These are needed so that we can re-parent these source
clocks if we want to drive it using a different DSI PLL.

We shouldn't get these via DT because they aren't clocks that directly
serve as inputs to the dsi host.

Fortunately, there is a static parent-child link between the
byte_clk_src/pixel_clk_src and byte_clk/pixel_clk clocks. So, we can
retrieve the source clocks via clk_get_parent.

Do this instead of retrieving via DT.

Cc: Rob Herring <robh@kernel.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 4c49868..aec97c8 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -356,20 +356,17 @@ static int dsi_clk_init(struct msm_dsi_host *msm_host)
 		goto exit;
 	}
 
-	msm_host->byte_clk_src = devm_clk_get(dev, "byte_clk_src");
-	if (IS_ERR(msm_host->byte_clk_src)) {
-		ret = PTR_ERR(msm_host->byte_clk_src);
+	msm_host->byte_clk_src = clk_get_parent(msm_host->byte_clk);
+	if (!msm_host->byte_clk_src) {
+		ret = -ENODEV;
 		pr_err("%s: can't find byte_clk_src. ret=%d\n", __func__, ret);
-		msm_host->byte_clk_src = NULL;
 		goto exit;
 	}
 
-	msm_host->pixel_clk_src = devm_clk_get(dev, "pixel_clk_src");
-	if (IS_ERR(msm_host->pixel_clk_src)) {
-		ret = PTR_ERR(msm_host->pixel_clk_src);
+	msm_host->pixel_clk_src = clk_get_parent(msm_host->pixel_clk);
+	if (!msm_host->pixel_clk_src) {
+		ret = -ENODEV;
 		pr_err("%s: can't find pixel_clk_src. ret=%d\n", __func__, ret);
-		msm_host->pixel_clk_src = NULL;
-		goto exit;
 	}
 
 exit:
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 02/12] drm/msm/dsi: Add support for 28nm PHY on 8960

[Archit Taneja]

DSI PHY on MSM8960 and APQ8064 is a 28nm PHY that's different from the
supported 28nm LP PHY found in newer chips.

Add support for the new PHY.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/Kconfig                     |   8 +
 drivers/gpu/drm/msm/Makefile                    |   1 +
 drivers/gpu/drm/msm/dsi/dsi.h                   |   1 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c           |   4 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.h           |   1 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 195 ++++++++++++++++++++++++
 6 files changed, 210 insertions(+)
 create mode 100644 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c

diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
index 84d3ec9..215495c 100644
--- a/drivers/gpu/drm/msm/Kconfig
+++ b/drivers/gpu/drm/msm/Kconfig
@@ -54,3 +54,11 @@ config DRM_MSM_DSI_20NM_PHY
 	default y
 	help
 	  Choose this option if the 20nm DSI PHY is used on the platform.
+
+config DRM_MSM_DSI_28NM_8960_PHY
+	bool "Enable DSI 28nm 8960 PHY driver in MSM DRM"
+	depends on DRM_MSM_DSI
+	default y
+	help
+	  Choose this option if the 28nm DSI PHY 8960 variant is used on the
+	  platform.
diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
index 2224fdd..1888fd3 100644
--- a/drivers/gpu/drm/msm/Makefile
+++ b/drivers/gpu/drm/msm/Makefile
@@ -63,6 +63,7 @@ msm-$(CONFIG_DRM_MSM_DSI) += dsi/dsi.o \
 
 msm-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += dsi/phy/dsi_phy_28nm.o
 msm-$(CONFIG_DRM_MSM_DSI_20NM_PHY) += dsi/phy/dsi_phy_20nm.o
+msm-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += dsi/phy/dsi_phy_28nm_8960.o
 
 ifeq ($(CONFIG_DRM_MSM_DSI_PLL),y)
 msm-y += dsi/pll/dsi_pll.o
diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h
index 5f5a373..8140e8b 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.h
+++ b/drivers/gpu/drm/msm/dsi/dsi.h
@@ -31,6 +31,7 @@ enum msm_dsi_phy_type {
 	MSM_DSI_PHY_28NM_HPM,
 	MSM_DSI_PHY_28NM_LP,
 	MSM_DSI_PHY_20NM,
+	MSM_DSI_PHY_28NM_8960,
 	MSM_DSI_PHY_MAX
 };
 
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index f1f955f..91a95fb 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -277,6 +277,10 @@ static const struct of_device_id dsi_phy_dt_match[] = {
 	{ .compatible = "qcom,dsi-phy-20nm",
 	  .data = &dsi_phy_20nm_cfgs },
 #endif
+#ifdef CONFIG_DRM_MSM_DSI_28NM_8960_PHY
+	{ .compatible = "qcom,dsi-phy-28nm-8960",
+	  .data = &dsi_phy_28nm_8960_cfgs },
+#endif
 	{}
 };
 
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
index 0456b25..0d54ed0 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
@@ -43,6 +43,7 @@ struct msm_dsi_phy_cfg {
 extern const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs;
 
 struct msm_dsi_dphy_timing {
 	u32 clk_pre;
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
new file mode 100644
index 0000000..197b039
--- /dev/null
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
@@ -0,0 +1,195 @@
+/*
+ * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "dsi_phy.h"
+#include "dsi.xml.h"
+
+static void dsi_28nm_dphy_set_timing(struct msm_dsi_phy *phy,
+		struct msm_dsi_dphy_timing *timing)
+{
+	void __iomem *base = phy->base;
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_0,
+		DSI_28nm_8960_PHY_TIMING_CTRL_0_CLK_ZERO(timing->clk_zero));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_1,
+		DSI_28nm_8960_PHY_TIMING_CTRL_1_CLK_TRAIL(timing->clk_trail));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_2,
+		DSI_28nm_8960_PHY_TIMING_CTRL_2_CLK_PREPARE(timing->clk_prepare));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_3, 0x0);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_4,
+		DSI_28nm_8960_PHY_TIMING_CTRL_4_HS_EXIT(timing->hs_exit));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_5,
+		DSI_28nm_8960_PHY_TIMING_CTRL_5_HS_ZERO(timing->hs_zero));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_6,
+		DSI_28nm_8960_PHY_TIMING_CTRL_6_HS_PREPARE(timing->hs_prepare));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_7,
+		DSI_28nm_8960_PHY_TIMING_CTRL_7_HS_TRAIL(timing->hs_trail));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_8,
+		DSI_28nm_8960_PHY_TIMING_CTRL_8_HS_RQST(timing->hs_rqst));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_9,
+		DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_GO(timing->ta_go) |
+		DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_SURE(timing->ta_sure));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_10,
+		DSI_28nm_8960_PHY_TIMING_CTRL_10_TA_GET(timing->ta_get));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_11,
+		DSI_28nm_8960_PHY_TIMING_CTRL_11_TRIG3_CMD(0));
+}
+
+static void dsi_28nm_phy_regulator_init(struct msm_dsi_phy *phy)
+{
+	void __iomem *base = phy->reg_base;
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_0, 0x3);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_1, 1);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_2, 1);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_3, 0);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_4,
+		0x100);
+}
+
+static void dsi_28nm_phy_regulator_ctrl(struct msm_dsi_phy *phy)
+{
+	void __iomem *base = phy->reg_base;
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_0, 0x3);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_1, 0xa);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_2, 0x4);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_3, 0x0);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_4, 0x20);
+}
+
+static void dsi_28nm_phy_calibration(struct msm_dsi_phy *phy)
+{
+	void __iomem *base = phy->reg_base;
+	u32 status;
+	int i = 5000;
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CAL_PWR_CFG,
+			0x3);
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_CAL_SW_CFG_2, 0x0);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_1, 0x5a);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_3, 0x10);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_4, 0x1);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_0, 0x1);
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_TRIGGER, 0x1);
+	usleep_range(5000, 6000);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_TRIGGER, 0x0);
+
+	do {
+		status = dsi_phy_read(base +
+				REG_DSI_28nm_8960_PHY_MISC_CAL_STATUS);
+
+		if (!(status & DSI_28nm_8960_PHY_MISC_CAL_STATUS_CAL_BUSY))
+			break;
+
+		udelay(1);
+	} while (--i > 0);
+}
+
+static void dsi_28nm_phy_lane_config(struct msm_dsi_phy *phy)
+{
+	void __iomem *base = phy->base;
+	int i;
+
+	for (i = 0; i < 4; i++) {
+		dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LN_CFG_0(i), 0x80);
+		dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LN_CFG_1(i), 0x45);
+		dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LN_CFG_2(i), 0x00);
+		dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LN_TEST_DATAPATH(i),
+			0x00);
+		dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LN_TEST_STR_0(i),
+			0x01);
+		dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LN_TEST_STR_1(i),
+			0x66);
+	}
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LNCK_CFG_0, 0x40);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LNCK_CFG_1, 0x67);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LNCK_CFG_2, 0x0);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LNCK_TEST_DATAPATH, 0x0);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LNCK_TEST_STR0, 0x1);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LNCK_TEST_STR1, 0x88);
+}
+
+static int dsi_28nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
+		const unsigned long bit_rate, const unsigned long esc_rate)
+{
+	struct msm_dsi_dphy_timing *timing = &phy->timing;
+	void __iomem *base = phy->base;
+
+	DBG("");
+
+	if (msm_dsi_dphy_timing_calc(timing, bit_rate, esc_rate)) {
+		dev_err(&phy->pdev->dev,
+			"%s: D-PHY timing calculation failed\n", __func__);
+		return -EINVAL;
+	}
+
+	dsi_28nm_phy_regulator_init(phy);
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LDO_CTRL, 0x04);
+
+	/* strength control */
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_STRENGTH_0, 0xff);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_STRENGTH_1, 0x00);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_STRENGTH_2, 0x06);
+
+	/* phy ctrl */
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_CTRL_0, 0x5f);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_CTRL_1, 0x00);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_CTRL_2, 0x00);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_CTRL_3, 0x10);
+
+	dsi_28nm_phy_regulator_ctrl(phy);
+
+	dsi_28nm_phy_calibration(phy);
+
+	dsi_28nm_phy_lane_config(phy);
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_BIST_CTRL_4, 0x0f);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_BIST_CTRL_1, 0x03);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_BIST_CTRL_0, 0x03);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_BIST_CTRL_4, 0x0);
+
+	dsi_28nm_dphy_set_timing(phy, timing);
+
+	return 0;
+}
+
+static void dsi_28nm_phy_disable(struct msm_dsi_phy *phy)
+{
+	dsi_phy_write(phy->base + REG_DSI_28nm_8960_PHY_CTRL_0, 0x0);
+
+	/*
+	 * Wait for the registers writes to complete in order to
+	 * ensure that the phy is completely disabled
+	 */
+	wmb();
+}
+
+const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs = {
+	.type = MSM_DSI_PHY_28NM_8960,
+	.src_pll_truthtable = { {true, true}, {false, true} },
+	.reg_cfg = {
+		.num = 1,
+		.regs = {
+			{"vddio", 1800000, 1800000, 100000, 100},
+		},
+	},
+	.ops = {
+		.enable = dsi_28nm_phy_enable,
+		.disable = dsi_28nm_phy_disable,
+	},
+};
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 03/12] drm/msm/dsi: Add DSI PLL for 28nm 8960 PHY

[Archit Taneja]

Add DSI PLL common clock framework clocks for 8960 PHY.

The PLL here is different from the ones found in B family msm chips. As
before, the DSI provides two clocks to the outside world. dsixpll and
dsixpllbyte (x = 1, 2). dsixpll is a regular clock divider, but
dsixpllbyte is modelled as a custom clock divider.

dsixpllbyte is the starting point of the PLL configuration. It is the
one that sets up the VCO clock rate. We need the VCO clock rate in the
form: F * byteclk, where F is a multiplication factor that varies on
the byte clock the DSI driver is trying to set. We use the custom
clk_ops for dsixpllbyte to ensure that the parent (VCO) is set at this
rate.

An additional divider (POSTDIV1) generates the bitclk. Since bit clock
can be derived from byteclock, we calculate it internally, and don't
expose it as a clock.

Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/Makefile                    |   1 +
 drivers/gpu/drm/msm/dsi/pll/dsi_pll.c           |   3 +
 drivers/gpu/drm/msm/dsi/pll/dsi_pll.h           |  10 +
 drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c | 533 ++++++++++++++++++++++++
 4 files changed, 547 insertions(+)
 create mode 100644 drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c

diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
index 1888fd3..065ad41 100644
--- a/drivers/gpu/drm/msm/Makefile
+++ b/drivers/gpu/drm/msm/Makefile
@@ -68,6 +68,7 @@ msm-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += dsi/phy/dsi_phy_28nm_8960.o
 ifeq ($(CONFIG_DRM_MSM_DSI_PLL),y)
 msm-y += dsi/pll/dsi_pll.o
 msm-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += dsi/pll/dsi_pll_28nm.o
+msm-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += dsi/pll/dsi_pll_28nm_8960.o
 endif
 
 obj-$(CONFIG_DRM_MSM)	+= msm.o
diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c
index 5104fc9..5cd438f 100644
--- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c
+++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c
@@ -151,6 +151,9 @@ struct msm_dsi_pll *msm_dsi_pll_init(struct platform_device *pdev,
 	case MSM_DSI_PHY_28NM_LP:
 		pll = msm_dsi_pll_28nm_init(pdev, type, id);
 		break;
+	case MSM_DSI_PHY_28NM_8960:
+		pll = msm_dsi_pll_28nm_8960_init(pdev, id);
+		break;
 	default:
 		pll = ERR_PTR(-ENXIO);
 		break;
diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h
index 063caa2..80b6038 100644
--- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h
+++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h
@@ -93,6 +93,16 @@ static inline struct msm_dsi_pll *msm_dsi_pll_28nm_init(
 	return ERR_PTR(-ENODEV);
 }
 #endif
+#ifdef CONFIG_DRM_MSM_DSI_28NM_8960_PHY
+struct msm_dsi_pll *msm_dsi_pll_28nm_8960_init(struct platform_device *pdev,
+					       int id);
+#else
+struct msm_dsi_pll *msm_dsi_pll_28nm_8960_init(struct platform_device *pdev,
+					       int id)
+{
+	return ERR_PTR(-ENODEV);
+}
+#endif
 
 #endif /* __DSI_PLL_H__ */
 
diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c
new file mode 100644
index 0000000..38c90e1
--- /dev/null
+++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c
@@ -0,0 +1,533 @@
+/*
+ * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+
+#include "dsi_pll.h"
+#include "dsi.xml.h"
+
+/*
+ * DSI PLL 28nm (8960/A family) - clock diagram (eg: DSI1):
+ *
+ *
+ *                        +------+
+ *  dsi1vco_clk ----o-----| DIV1 |---dsi1pllbit (not exposed as clock)
+ *  F * byte_clk    |     +------+
+ *                  | bit clock divider (F / 8)
+ *                  |
+ *                  |     +------+
+ *                  o-----| DIV2 |---dsi0pllbyte---o---> To byte RCG
+ *                  |     +------+                 | (sets parent rate)
+ *                  | byte clock divider (F)       |
+ *                  |                              |
+ *                  |                              o---> To esc RCG
+ *                  |                                (doesn't set parent rate)
+ *                  |
+ *                  |     +------+
+ *                  o-----| DIV3 |----dsi0pll------o---> To dsi RCG
+ *                        +------+                 | (sets parent rate)
+ *                  dsi clock divider (F * magic)  |
+ *                                                 |
+ *                                                 o---> To pixel rcg
+ *                                                  (doesn't set parent rate)
+ */
+
+#define POLL_MAX_READS		8000
+#define POLL_TIMEOUT_US		1
+
+#define NUM_PROVIDED_CLKS	2
+
+#define VCO_REF_CLK_RATE	27000000
+#define VCO_MIN_RATE		600000000
+#define VCO_MAX_RATE		1200000000
+
+#define DSI_BYTE_PLL_CLK	0
+#define DSI_PIXEL_PLL_CLK	1
+
+#define VCO_PREF_DIV_RATIO	27
+
+struct pll_28nm_cached_state {
+	unsigned long vco_rate;
+	u8 postdiv3;
+	u8 postdiv2;
+	u8 postdiv1;
+};
+
+struct clk_bytediv {
+	struct clk_hw hw;
+	void __iomem *reg;
+};
+
+struct dsi_pll_28nm {
+	struct msm_dsi_pll base;
+
+	int id;
+	struct platform_device *pdev;
+	void __iomem *mmio;
+
+	/* custom byte clock divider */
+	struct clk_bytediv *bytediv;
+
+	/* private clocks: */
+	struct clk *clks[NUM_DSI_CLOCKS_MAX];
+	u32 num_clks;
+
+	/* clock-provider: */
+	struct clk *provided_clks[NUM_PROVIDED_CLKS];
+	struct clk_onecell_data clk_data;
+
+	struct pll_28nm_cached_state cached_state;
+};
+
+#define to_pll_28nm(x)	container_of(x, struct dsi_pll_28nm, base)
+
+static bool pll_28nm_poll_for_ready(struct dsi_pll_28nm *pll_28nm,
+				    int nb_tries, int timeout_us)
+{
+	bool pll_locked = false;
+	u32 val;
+
+	while (nb_tries--) {
+		val = pll_read(pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_RDY);
+		pll_locked = !!(val & DSI_28nm_8960_PHY_PLL_RDY_PLL_RDY);
+
+		if (pll_locked)
+			break;
+
+		udelay(timeout_us);
+	}
+	DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* ");
+
+	return pll_locked;
+}
+
+/*
+ * Clock Callbacks
+ */
+static int dsi_pll_28nm_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+				     unsigned long parent_rate)
+{
+	struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+	void __iomem *base = pll_28nm->mmio;
+	u32 val, temp, fb_divider;
+
+	DBG("rate=%lu, parent's=%lu", rate, parent_rate);
+
+	temp = rate / 10;
+	val = VCO_REF_CLK_RATE / 10;
+	fb_divider = (temp * VCO_PREF_DIV_RATIO) / val;
+	fb_divider = fb_divider / 2 - 1;
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_1,
+			fb_divider & 0xff);
+
+	val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2);
+
+	val |= (fb_divider >> 8) & 0x07;
+
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2,
+			val);
+
+	val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3);
+
+	val |= (VCO_PREF_DIV_RATIO - 1) & 0x3f;
+
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3,
+			val);
+
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_6,
+			0xf);
+
+	val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8);
+	val |= 0x7 << 4;
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8,
+			val);
+
+	return 0;
+}
+
+static int dsi_pll_28nm_clk_is_enabled(struct clk_hw *hw)
+{
+	struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+
+	return pll_28nm_poll_for_ready(pll_28nm, POLL_MAX_READS,
+					POLL_TIMEOUT_US);
+}
+
+static unsigned long dsi_pll_28nm_clk_recalc_rate(struct clk_hw *hw,
+						  unsigned long parent_rate)
+{
+	struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+	void __iomem *base = pll_28nm->mmio;
+	unsigned long vco_rate;
+	u32 status, fb_divider, temp, ref_divider;
+
+	VERB("parent_rate=%lu", parent_rate);
+
+	status = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_0);
+
+	if (status & DSI_28nm_8960_PHY_PLL_CTRL_0_ENABLE) {
+		fb_divider = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_1);
+		fb_divider &= 0xff;
+		temp = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2) & 0x07;
+		fb_divider = (temp << 8) | fb_divider;
+		fb_divider += 1;
+
+		ref_divider = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3);
+		ref_divider &= 0x3f;
+		ref_divider += 1;
+
+		/* multiply by 2 */
+		vco_rate = (parent_rate / ref_divider) * fb_divider * 2;
+	} else {
+		vco_rate = 0;
+	}
+
+	DBG("returning vco rate = %lu", vco_rate);
+
+	return vco_rate;
+}
+
+static const struct clk_ops clk_ops_dsi_pll_28nm_vco = {
+	.round_rate = msm_dsi_pll_helper_clk_round_rate,
+	.set_rate = dsi_pll_28nm_clk_set_rate,
+	.recalc_rate = dsi_pll_28nm_clk_recalc_rate,
+	.prepare = msm_dsi_pll_helper_clk_prepare,
+	.unprepare = msm_dsi_pll_helper_clk_unprepare,
+	.is_enabled = dsi_pll_28nm_clk_is_enabled,
+};
+
+/*
+ * Custom byte clock divier clk_ops
+ *
+ * This clock is the entry point to configuring the PLL. The user (dsi host)
+ * will set this clock's rate to the desired byte clock rate. The VCO lock
+ * frequency is a multiple of the byte clock rate. The multiplication factor
+ * (shown as F in the diagram above) is a function of the byte clock rate.
+ *
+ * This custom divider clock ensures that its parent (VCO) is set to the
+ * desired rate, and that the byte clock postdivider (POSTDIV2) is configured
+ * accordingly
+ */
+#define to_clk_bytediv(_hw) container_of(_hw, struct clk_bytediv, hw)
+
+static unsigned long clk_bytediv_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_bytediv *bytediv = to_clk_bytediv(hw);
+	unsigned int div;
+
+	div = pll_read(bytediv->reg) & 0xff;
+
+	return parent_rate / (div + 1);
+}
+
+/* find multiplication factor(wrt byte clock) at which the VCO should be set */
+static unsigned int get_vco_mul_factor(unsigned long byte_clk_rate)
+{
+	unsigned long bit_mhz;
+
+	/* convert to bit clock in Mhz */
+	bit_mhz = (byte_clk_rate * 8) / 1000000;
+
+	if (bit_mhz < 125)
+		return 64;
+	else if (bit_mhz < 250)
+		return 32;
+	else if (bit_mhz < 600)
+		return 16;
+	else
+		return 8;
+}
+
+static long clk_bytediv_round_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long *prate)
+{
+	unsigned long best_parent;
+	unsigned int factor;
+
+	factor = get_vco_mul_factor(rate);
+
+	best_parent = rate * factor;
+	*prate = clk_hw_round_rate(clk_hw_get_parent(hw), best_parent);
+
+	return *prate / factor;
+}
+
+static int clk_bytediv_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct clk_bytediv *bytediv = to_clk_bytediv(hw);
+	u32 val;
+	unsigned int factor;
+
+	factor = get_vco_mul_factor(rate);
+
+	val = pll_read(bytediv->reg);
+	val |= (factor - 1) & 0xff;
+	pll_write(bytediv->reg, val);
+
+	return 0;
+}
+
+/* Our special byte clock divider ops */
+static const struct clk_ops clk_bytediv_ops = {
+	.round_rate = clk_bytediv_round_rate,
+	.set_rate = clk_bytediv_set_rate,
+	.recalc_rate = clk_bytediv_recalc_rate,
+};
+
+/*
+ * PLL Callbacks
+ */
+static int dsi_pll_28nm_enable_seq(struct msm_dsi_pll *pll)
+{
+	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+	struct device *dev = &pll_28nm->pdev->dev;
+	void __iomem *base = pll_28nm->mmio;
+	bool locked;
+	unsigned int bit_div, byte_div;
+	int max_reads = 1000, timeout_us = 100;
+	u32 val;
+
+	DBG("id=%d", pll_28nm->id);
+
+	/*
+	 * before enabling the PLL, configure the bit clock divider since we
+	 * don't expose it as a clock to the outside world
+	 * 1: read back the byte clock divider that should already be set
+	 * 2: divide by 8 to get bit clock divider
+	 * 3: write it to POSTDIV1
+	 */
+	val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9);
+	byte_div = val + 1;
+	bit_div = byte_div / 8;
+
+	val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8);
+	val &= ~0xf;
+	val |= (bit_div - 1);
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8, val);
+
+	/* enable the PLL */
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_0,
+			DSI_28nm_8960_PHY_PLL_CTRL_0_ENABLE);
+
+	locked = pll_28nm_poll_for_ready(pll_28nm, max_reads, timeout_us);
+
+	if (unlikely(!locked))
+		dev_err(dev, "DSI PLL lock failed\n");
+	else
+		DBG("DSI PLL lock success");
+
+	return locked ? 0 : -EINVAL;
+}
+
+static void dsi_pll_28nm_disable_seq(struct msm_dsi_pll *pll)
+{
+	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+
+	DBG("id=%d", pll_28nm->id);
+	pll_write(pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_CTRL_0, 0x00);
+}
+
+static void dsi_pll_28nm_save_state(struct msm_dsi_pll *pll)
+{
+	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+	struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state;
+	void __iomem *base = pll_28nm->mmio;
+
+	cached_state->postdiv3 =
+			pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_10);
+	cached_state->postdiv2 =
+			pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9);
+	cached_state->postdiv1 =
+			pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8);
+
+	cached_state->vco_rate = clk_hw_get_rate(&pll->clk_hw);
+}
+
+static int dsi_pll_28nm_restore_state(struct msm_dsi_pll *pll)
+{
+	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+	struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state;
+	void __iomem *base = pll_28nm->mmio;
+	int ret;
+
+	ret = dsi_pll_28nm_clk_set_rate(&pll->clk_hw,
+					cached_state->vco_rate, 0);
+	if (ret) {
+		dev_err(&pll_28nm->pdev->dev,
+			"restore vco rate failed. ret=%d\n", ret);
+		return ret;
+	}
+
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_10,
+			cached_state->postdiv3);
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9,
+			cached_state->postdiv2);
+	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8,
+			cached_state->postdiv1);
+
+	return 0;
+}
+
+static int dsi_pll_28nm_get_provider(struct msm_dsi_pll *pll,
+				struct clk **byte_clk_provider,
+				struct clk **pixel_clk_provider)
+{
+	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+
+	if (byte_clk_provider)
+		*byte_clk_provider = pll_28nm->provided_clks[DSI_BYTE_PLL_CLK];
+	if (pixel_clk_provider)
+		*pixel_clk_provider =
+				pll_28nm->provided_clks[DSI_PIXEL_PLL_CLK];
+
+	return 0;
+}
+
+static void dsi_pll_28nm_destroy(struct msm_dsi_pll *pll)
+{
+	struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+
+	msm_dsi_pll_helper_unregister_clks(pll_28nm->pdev,
+					pll_28nm->clks, pll_28nm->num_clks);
+}
+
+static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm)
+{
+	char *clk_name, *parent_name, *vco_name;
+	struct clk_init_data vco_init = {
+		.parent_names = (const char *[]){ "pxo" },
+		.num_parents = 1,
+		.ops = &clk_ops_dsi_pll_28nm_vco,
+	};
+	struct device *dev = &pll_28nm->pdev->dev;
+	struct clk **clks = pll_28nm->clks;
+	struct clk **provided_clks = pll_28nm->provided_clks;
+	struct clk_bytediv *bytediv;
+	struct clk_init_data bytediv_init = { };
+	int ret, num = 0;
+
+	DBG("%d", pll_28nm->id);
+
+	bytediv = devm_kzalloc(dev, sizeof(*bytediv), GFP_KERNEL);
+	if (!bytediv)
+		return -ENOMEM;
+
+	vco_name = devm_kzalloc(dev, 32, GFP_KERNEL);
+	if (!vco_name)
+		return -ENOMEM;
+
+	parent_name = devm_kzalloc(dev, 32, GFP_KERNEL);
+	if (!parent_name)
+		return -ENOMEM;
+
+	clk_name = devm_kzalloc(dev, 32, GFP_KERNEL);
+	if (!clk_name)
+		return -ENOMEM;
+
+	pll_28nm->bytediv = bytediv;
+
+	snprintf(vco_name, 32, "dsi%dvco_clk", pll_28nm->id);
+	vco_init.name = vco_name;
+
+	pll_28nm->base.clk_hw.init = &vco_init;
+
+	clks[num++] = clk_register(dev, &pll_28nm->base.clk_hw);
+
+	/* prepare and register bytediv */
+	bytediv->hw.init = &bytediv_init;
+	bytediv->reg = pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_CTRL_9;
+
+	snprintf(parent_name, 32, "dsi%dvco_clk", pll_28nm->id);
+	snprintf(clk_name, 32, "dsi%dpllbyte", pll_28nm->id);
+
+	bytediv_init.name = clk_name;
+	bytediv_init.ops = &clk_bytediv_ops;
+	bytediv_init.flags = CLK_SET_RATE_PARENT;
+	bytediv_init.parent_names = (const char * const *) &parent_name;
+	bytediv_init.num_parents = 1;
+
+	/* DIV2 */
+	clks[num++] = provided_clks[DSI_BYTE_PLL_CLK] =
+			clk_register(dev, &bytediv->hw);
+
+	snprintf(clk_name, 32, "dsi%dpll", pll_28nm->id);
+	/* DIV3 */
+	clks[num++] = provided_clks[DSI_PIXEL_PLL_CLK] =
+			clk_register_divider(dev, clk_name,
+				parent_name, 0, pll_28nm->mmio +
+				REG_DSI_28nm_8960_PHY_PLL_CTRL_10,
+				0, 8, 0, NULL);
+
+	pll_28nm->num_clks = num;
+
+	pll_28nm->clk_data.clk_num = NUM_PROVIDED_CLKS;
+	pll_28nm->clk_data.clks = provided_clks;
+
+	ret = of_clk_add_provider(dev->of_node,
+			of_clk_src_onecell_get, &pll_28nm->clk_data);
+	if (ret) {
+		dev_err(dev, "failed to register clk provider: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+struct msm_dsi_pll *msm_dsi_pll_28nm_8960_init(struct platform_device *pdev,
+					       int id)
+{
+	struct dsi_pll_28nm *pll_28nm;
+	struct msm_dsi_pll *pll;
+	int ret;
+
+	if (!pdev)
+		return ERR_PTR(-ENODEV);
+
+	pll_28nm = devm_kzalloc(&pdev->dev, sizeof(*pll_28nm), GFP_KERNEL);
+	if (!pll_28nm)
+		return ERR_PTR(-ENOMEM);
+
+	pll_28nm->pdev = pdev;
+	pll_28nm->id = id + 1;
+
+	pll_28nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL");
+	if (IS_ERR_OR_NULL(pll_28nm->mmio)) {
+		dev_err(&pdev->dev, "%s: failed to map pll base\n", __func__);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	pll = &pll_28nm->base;
+	pll->min_rate = VCO_MIN_RATE;
+	pll->max_rate = VCO_MAX_RATE;
+	pll->get_provider = dsi_pll_28nm_get_provider;
+	pll->destroy = dsi_pll_28nm_destroy;
+	pll->disable_seq = dsi_pll_28nm_disable_seq;
+	pll->save_state = dsi_pll_28nm_save_state;
+	pll->restore_state = dsi_pll_28nm_restore_state;
+
+	pll->en_seq_cnt = 1;
+	pll->enable_seqs[0] = dsi_pll_28nm_enable_seq;
+
+	ret = pll_28nm_register(pll_28nm);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register PLL: %d\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	return pll;
+}
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 04/12] drm/msm/dsi: Use a better way to figure out DSI version

[Archit Taneja]

The current version checking mechanism works fine for DSI6G blocks. It
doesn't work so well for older generation DSIv2 blocks.

The initial read of REG_DSI_6G_HW_VERSION(offset 0x0) would result in a
read of REG_DSI_CTRL for DSIv2. This register won't necessarily be 0 on
DSIv2. It can be non zero if DSI was previously initialized by the
bootloader.

Instead of reading offset 0x0, we now read offset 0x1f0. For DSIv2, this
register is DSI_VERSION, and is bound to be non-zero. On DSI6G, this
register(offset 0x1f0) is SCRATCH_REGISTER_0, which no one ever seems to
touch, and from all register dumps I'vc seen, holds 0 all the time.

Modify dsi_get_version to read REG_DSI_VERSION to determine whether we
are DSI6G or DSIv2.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index aec97c8..7a365df 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -33,17 +33,24 @@
 static int dsi_get_version(const void __iomem *base, u32 *major, u32 *minor)
 {
 	u32 ver;
-	u32 ver_6g;
 
 	if (!major || !minor)
 		return -EINVAL;
 
-	/* From DSI6G(v3), addition of a 6G_HW_VERSION register at offset 0
+	/*
+	 * From DSI6G(v3), addition of a 6G_HW_VERSION register at offset 0
 	 * makes all other registers 4-byte shifted down.
+	 *
+	 * In order to identify between DSI6G(v3) and beyond, and DSIv2 and
+	 * older, we read the DSI_VERSION register without any shift(offset
+	 * 0x1f0). In the case of DSIv2, this hast to be a non-zero value. In
+	 * the case of DSI6G, this has to be zero (the offset points to a
+	 * scratch register which we never touch)
 	 */
-	ver_6g = msm_readl(base + REG_DSI_6G_HW_VERSION);
-	if (ver_6g == 0) {
-		ver = msm_readl(base + REG_DSI_VERSION);
+
+	ver = msm_readl(base + REG_DSI_VERSION);
+	if (ver) {
+		/* older dsi host, there is no register shift */
 		ver = FIELD(ver, DSI_VERSION_MAJOR);
 		if (ver <= MSM_DSI_VER_MAJOR_V2) {
 			/* old versions */
@@ -54,12 +61,17 @@ static int dsi_get_version(const void __iomem *base, u32 *major, u32 *minor)
 			return -EINVAL;
 		}
 	} else {
+		/*
+		 * newer host, offset 0 has 6G_HW_VERSION, the rest of the
+		 * registers are shifted down, read DSI_VERSION again with
+		 * the shifted offset
+		 */
 		ver = msm_readl(base + DSI_6G_REG_SHIFT + REG_DSI_VERSION);
 		ver = FIELD(ver, DSI_VERSION_MAJOR);
 		if (ver == MSM_DSI_VER_MAJOR_6G) {
 			/* 6G version */
 			*major = ver;
-			*minor = ver_6g;
+			*minor = msm_readl(base + REG_DSI_6G_HW_VERSION);
 			return 0;
 		} else {
 			return -EINVAL;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 05/12] drm/msm/dsi: Delay dsi_clk_init

[Archit Taneja]

Initialize clocks only after we get the DSI host version. This will allow
us to get clocks using a pre-defined list based on the DSI major/minor
version of the host. This is required since clock requirements of
different major DSI revisions(v2 vs 6g) aren't the same.

Modify dsi_get_version to get the interface clock, and then put it after
it is used.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 32 ++++++++++++++++++++++----------
 1 file changed, 22 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 7a365df..f787024 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -177,21 +177,31 @@ static const struct msm_dsi_cfg_handler *dsi_get_config(
 						struct msm_dsi_host *msm_host)
 {
 	const struct msm_dsi_cfg_handler *cfg_hnd = NULL;
+	struct device *dev = &msm_host->pdev->dev;
 	struct regulator *gdsc_reg;
+	struct clk *ahb_clk;
 	int ret;
 	u32 major = 0, minor = 0;
 
-	gdsc_reg = regulator_get(&msm_host->pdev->dev, "gdsc");
+	gdsc_reg = regulator_get(dev, "gdsc");
 	if (IS_ERR(gdsc_reg)) {
 		pr_err("%s: cannot get gdsc\n", __func__);
 		goto exit;
 	}
+
+	ahb_clk = clk_get(dev, "iface_clk");
+	if (IS_ERR(ahb_clk)) {
+		pr_err("%s: cannot get interface clock\n", __func__);
+		goto put_gdsc;
+	}
+
 	ret = regulator_enable(gdsc_reg);
 	if (ret) {
 		pr_err("%s: unable to enable gdsc\n", __func__);
-		goto put_gdsc;
+		goto put_clk;
 	}
-	ret = clk_prepare_enable(msm_host->ahb_clk);
+
+	ret = clk_prepare_enable(ahb_clk);
 	if (ret) {
 		pr_err("%s: unable to enable ahb_clk\n", __func__);
 		goto disable_gdsc;
@@ -208,9 +218,11 @@ static const struct msm_dsi_cfg_handler *dsi_get_config(
 	DBG("%s: Version %x:%x\n", __func__, major, minor);
 
 disable_clks:
-	clk_disable_unprepare(msm_host->ahb_clk);
+	clk_disable_unprepare(ahb_clk);
 disable_gdsc:
 	regulator_disable(gdsc_reg);
+put_clk:
+	clk_put(ahb_clk);
 put_gdsc:
 	regulator_put(gdsc_reg);
 exit:
@@ -1417,12 +1429,6 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi)
 		goto fail;
 	}
 
-	ret = dsi_clk_init(msm_host);
-	if (ret) {
-		pr_err("%s: unable to initialize dsi clks\n", __func__);
-		goto fail;
-	}
-
 	msm_host->ctrl_base = msm_ioremap(pdev, "dsi_ctrl", "DSI CTRL");
 	if (IS_ERR(msm_host->ctrl_base)) {
 		pr_err("%s: unable to map Dsi ctrl base\n", __func__);
@@ -1446,6 +1452,12 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi)
 		goto fail;
 	}
 
+	ret = dsi_clk_init(msm_host);
+	if (ret) {
+		pr_err("%s: unable to initialize dsi clks\n", __func__);
+		goto fail;
+	}
+
 	msm_host->rx_buf = devm_kzalloc(&pdev->dev, SZ_4K, GFP_KERNEL);
 	if (!msm_host->rx_buf) {
 		pr_err("%s: alloc rx temp buf failed\n", __func__);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 06/12] drm/msm/dsi: Parse bus clocks from a list

[Archit Taneja]

DSI bus clocks seem to vary between different DSI host versions, and the
SOC to which they belong. Even the enable/disable sequence varies.

Provide a list of bus clock names in dsi_cfg. The driver will use this to
retrieve the clocks, and enable/disable them.

Add bus clock lists for DSI6G, and DSI for MSM8916(this is DSI6G too, but
there is no MMSS_CC specific clock since there is no MMSS clock controller
on 8916).

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/dsi.h      |   1 +
 drivers/gpu/drm/msm/dsi/dsi_cfg.c  |  16 +++++-
 drivers/gpu/drm/msm/dsi/dsi_cfg.h  |   2 +
 drivers/gpu/drm/msm/dsi/dsi_host.c | 107 ++++++++++++-------------------------
 4 files changed, 53 insertions(+), 73 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h
index 8140e8b..7336b55 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.h
+++ b/drivers/gpu/drm/msm/dsi/dsi.h
@@ -36,6 +36,7 @@ enum msm_dsi_phy_type {
 };
 
 #define DSI_DEV_REGULATOR_MAX	8
+#define DSI_BUS_CLK_MAX		4
 
 /* Regulators for DSI devices */
 struct dsi_reg_entry {
diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.c b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
index 5872d5e..c40044f 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
@@ -18,6 +18,10 @@ static const struct msm_dsi_config dsi_v2_cfg = {
 	.io_offset = 0,
 };
 
+static const char * const dsi_6g_bus_clk_names[] = {
+	"mdp_core_clk", "iface_clk", "bus_clk", "core_mmss_clk",
+};
+
 static const struct msm_dsi_config msm8974_apq8084_dsi_cfg = {
 	.io_offset = DSI_6G_REG_SHIFT,
 	.reg_cfg = {
@@ -29,6 +33,12 @@ static const struct msm_dsi_config msm8974_apq8084_dsi_cfg = {
 			{"vddio", 1800000, 1800000, 100000, 100},
 		},
 	},
+	.bus_clk_names = dsi_6g_bus_clk_names,
+	.num_bus_clks = ARRAY_SIZE(dsi_6g_bus_clk_names),
+};
+
+static const char * const dsi_8916_bus_clk_names[] = {
+	"mdp_core_clk", "iface_clk", "bus_clk",
 };
 
 static const struct msm_dsi_config msm8916_dsi_cfg = {
@@ -42,6 +52,8 @@ static const struct msm_dsi_config msm8916_dsi_cfg = {
 			{"vddio", 1800000, 1800000, 100000, 100},
 		},
 	},
+	.bus_clk_names = dsi_8916_bus_clk_names,
+	.num_bus_clks = ARRAY_SIZE(dsi_8916_bus_clk_names),
 };
 
 static const struct msm_dsi_config msm8994_dsi_cfg = {
@@ -57,7 +69,9 @@ static const struct msm_dsi_config msm8994_dsi_cfg = {
 			{"lab_reg", -1, -1, -1, -1},
 			{"ibb_reg", -1, -1, -1, -1},
 		},
-	}
+	},
+	.bus_clk_names = dsi_6g_bus_clk_names,
+	.num_bus_clks = ARRAY_SIZE(dsi_6g_bus_clk_names),
 };
 
 static const struct msm_dsi_cfg_handler dsi_cfg_handlers[] = {
diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.h b/drivers/gpu/drm/msm/dsi/dsi_cfg.h
index 4cf8872..5a36836 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.h
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.h
@@ -30,6 +30,8 @@
 struct msm_dsi_config {
 	u32 io_offset;
 	struct dsi_reg_config reg_cfg;
+	const char * const *bus_clk_names;
+	const int num_bus_clks;
 };
 
 struct msm_dsi_cfg_handler {
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index f787024..56c7535 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -103,10 +103,9 @@ struct msm_dsi_host {
 
 	void __iomem *ctrl_base;
 	struct regulator_bulk_data supplies[DSI_DEV_REGULATOR_MAX];
-	struct clk *mdp_core_clk;
-	struct clk *ahb_clk;
-	struct clk *axi_clk;
-	struct clk *mmss_misc_ahb_clk;
+
+	struct clk *bus_clks[DSI_BUS_CLK_MAX];
+
 	struct clk *byte_clk;
 	struct clk *esc_clk;
 	struct clk *pixel_clk;
@@ -319,40 +318,22 @@ static int dsi_regulator_init(struct msm_dsi_host *msm_host)
 static int dsi_clk_init(struct msm_dsi_host *msm_host)
 {
 	struct device *dev = &msm_host->pdev->dev;
-	int ret = 0;
-
-	msm_host->mdp_core_clk = devm_clk_get(dev, "mdp_core_clk");
-	if (IS_ERR(msm_host->mdp_core_clk)) {
-		ret = PTR_ERR(msm_host->mdp_core_clk);
-		pr_err("%s: Unable to get mdp core clk. ret=%d\n",
-			__func__, ret);
-		goto exit;
-	}
-
-	msm_host->ahb_clk = devm_clk_get(dev, "iface_clk");
-	if (IS_ERR(msm_host->ahb_clk)) {
-		ret = PTR_ERR(msm_host->ahb_clk);
-		pr_err("%s: Unable to get mdss ahb clk. ret=%d\n",
-			__func__, ret);
-		goto exit;
-	}
-
-	msm_host->axi_clk = devm_clk_get(dev, "bus_clk");
-	if (IS_ERR(msm_host->axi_clk)) {
-		ret = PTR_ERR(msm_host->axi_clk);
-		pr_err("%s: Unable to get axi bus clk. ret=%d\n",
-			__func__, ret);
-		goto exit;
-	}
-
-	msm_host->mmss_misc_ahb_clk = devm_clk_get(dev, "core_mmss_clk");
-	if (IS_ERR(msm_host->mmss_misc_ahb_clk)) {
-		ret = PTR_ERR(msm_host->mmss_misc_ahb_clk);
-		pr_err("%s: Unable to get mmss misc ahb clk. ret=%d\n",
-			__func__, ret);
-		goto exit;
+	const struct msm_dsi_config *cfg = msm_host->cfg_hnd->cfg;
+	int i, ret = 0;
+
+	/* get bus clocks */
+	for (i = 0; i < cfg->num_bus_clks; i++) {
+		msm_host->bus_clks[i] = devm_clk_get(dev,
+						cfg->bus_clk_names[i]);
+		if (IS_ERR(msm_host->bus_clks[i])) {
+			ret = PTR_ERR(msm_host->bus_clks[i]);
+			pr_err("%s: Unable to get %s, ret = %d\n",
+				__func__, cfg->bus_clk_names[i], ret);
+			goto exit;
+		}
 	}
 
+	/* get link and source clocks */
 	msm_host->byte_clk = devm_clk_get(dev, "byte_clk");
 	if (IS_ERR(msm_host->byte_clk)) {
 		ret = PTR_ERR(msm_host->byte_clk);
@@ -399,55 +380,37 @@ exit:
 
 static int dsi_bus_clk_enable(struct msm_dsi_host *msm_host)
 {
-	int ret;
+	const struct msm_dsi_config *cfg = msm_host->cfg_hnd->cfg;
+	int i, ret;
 
 	DBG("id=%d", msm_host->id);
 
-	ret = clk_prepare_enable(msm_host->mdp_core_clk);
-	if (ret) {
-		pr_err("%s: failed to enable mdp_core_clock, %d\n",
-							 __func__, ret);
-		goto core_clk_err;
-	}
-
-	ret = clk_prepare_enable(msm_host->ahb_clk);
-	if (ret) {
-		pr_err("%s: failed to enable ahb clock, %d\n", __func__, ret);
-		goto ahb_clk_err;
-	}
-
-	ret = clk_prepare_enable(msm_host->axi_clk);
-	if (ret) {
-		pr_err("%s: failed to enable ahb clock, %d\n", __func__, ret);
-		goto axi_clk_err;
-	}
-
-	ret = clk_prepare_enable(msm_host->mmss_misc_ahb_clk);
-	if (ret) {
-		pr_err("%s: failed to enable mmss misc ahb clk, %d\n",
-			__func__, ret);
-		goto misc_ahb_clk_err;
+	for (i = 0; i < cfg->num_bus_clks; i++) {
+		ret = clk_prepare_enable(msm_host->bus_clks[i]);
+		if (ret) {
+			pr_err("%s: failed to enable bus clock %d ret %d\n",
+				__func__, i, ret);
+			goto err;
+		}
 	}
 
 	return 0;
+err:
+	for (; i > 0; i--)
+		clk_disable_unprepare(msm_host->bus_clks[i]);
 
-misc_ahb_clk_err:
-	clk_disable_unprepare(msm_host->axi_clk);
-axi_clk_err:
-	clk_disable_unprepare(msm_host->ahb_clk);
-ahb_clk_err:
-	clk_disable_unprepare(msm_host->mdp_core_clk);
-core_clk_err:
 	return ret;
 }
 
 static void dsi_bus_clk_disable(struct msm_dsi_host *msm_host)
 {
+	const struct msm_dsi_config *cfg = msm_host->cfg_hnd->cfg;
+	int i;
+
 	DBG("");
-	clk_disable_unprepare(msm_host->mmss_misc_ahb_clk);
-	clk_disable_unprepare(msm_host->axi_clk);
-	clk_disable_unprepare(msm_host->ahb_clk);
-	clk_disable_unprepare(msm_host->mdp_core_clk);
+
+	for (i = cfg->num_bus_clks - 1; i >= 0; i--)
+		clk_disable_unprepare(msm_host->bus_clks[i]);
 }
 
 static int dsi_link_clk_enable(struct msm_dsi_host *msm_host)
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 07/12] drm/msm/dsi: Set up link clocks for DSIv2

[Archit Taneja]

DSIv2 (DSI on older A family chips) has slightly different link clock
requirements.

First, we have an extra clock called src_clk (with a dedicated RCG).
This is required by the DSI controller to process the pixel data
coming from MDP. It needs to be set at the rate "pclk * bytes_per_pixel".

We also need to explicitly configure esc_clk. On DSI6G chips, we don't
need to set a rate to esc_clk because its RCG is always sourced from
crystal clock (19.2 Mhz in all cases), which is within the escape clock
frequency range in the mipi DSI spec. For chips with DSIv2, the crystal
clock rate may not be within the required range (27Mhz on APQ8064).
Therefore, we derive it from the DSI byte clock. We calculate an esc_clck
rate that is within the mipi spec and also divisible by the byte clock
rate.

When setting rate and enabling the link clocks, we make sure that byte_clk
is configured before esc_clk, and src_clk before pixel_clk. We create two
different link_enable funcs for DSI6G and DSIv2 since the sequences are
different.

We also obtain two extra source clocks (dsi_src_clk and esc_src_clk) and
set their parent to the clocks provided by DSI PLL.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 191 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 186 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 56c7535..6ec2178 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -113,6 +113,14 @@ struct msm_dsi_host {
 	struct clk *pixel_clk_src;
 
 	u32 byte_clk_rate;
+	u32 esc_clk_rate;
+
+	/* DSI v2 specific clocks */
+	struct clk *src_clk;
+	struct clk *esc_clk_src;
+	struct clk *dsi_clk_src;
+
+	u32 src_clk_rate;
 
 	struct gpio_desc *disp_en_gpio;
 	struct gpio_desc *te_gpio;
@@ -318,7 +326,8 @@ static int dsi_regulator_init(struct msm_dsi_host *msm_host)
 static int dsi_clk_init(struct msm_dsi_host *msm_host)
 {
 	struct device *dev = &msm_host->pdev->dev;
-	const struct msm_dsi_config *cfg = msm_host->cfg_hnd->cfg;
+	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
+	const struct msm_dsi_config *cfg = cfg_hnd->cfg;
 	int i, ret = 0;
 
 	/* get bus clocks */
@@ -372,8 +381,34 @@ static int dsi_clk_init(struct msm_dsi_host *msm_host)
 	if (!msm_host->pixel_clk_src) {
 		ret = -ENODEV;
 		pr_err("%s: can't find pixel_clk_src. ret=%d\n", __func__, ret);
+		goto exit;
 	}
 
+	if (cfg_hnd->major == MSM_DSI_VER_MAJOR_V2) {
+		msm_host->src_clk = devm_clk_get(dev, "src_clk");
+		if (IS_ERR(msm_host->src_clk)) {
+			ret = PTR_ERR(msm_host->src_clk);
+			pr_err("%s: can't find dsi_src_clk. ret=%d\n",
+				__func__, ret);
+			msm_host->src_clk = NULL;
+			goto exit;
+		}
+
+		msm_host->esc_clk_src = clk_get_parent(msm_host->esc_clk);
+		if (!msm_host->esc_clk_src) {
+			ret = -ENODEV;
+			pr_err("%s: can't get esc_clk_src. ret=%d\n",
+				__func__, ret);
+			goto exit;
+		}
+
+		msm_host->dsi_clk_src = clk_get_parent(msm_host->src_clk);
+		if (!msm_host->dsi_clk_src) {
+			ret = -ENODEV;
+			pr_err("%s: can't get dsi_clk_src. ret=%d\n",
+				__func__, ret);
+		}
+	}
 exit:
 	return ret;
 }
@@ -413,7 +448,7 @@ static void dsi_bus_clk_disable(struct msm_dsi_host *msm_host)
 		clk_disable_unprepare(msm_host->bus_clks[i]);
 }
 
-static int dsi_link_clk_enable(struct msm_dsi_host *msm_host)
+static int dsi_link_clk_enable_6g(struct msm_dsi_host *msm_host)
 {
 	int ret;
 
@@ -460,11 +495,98 @@ error:
 	return ret;
 }
 
-static void dsi_link_clk_disable(struct msm_dsi_host *msm_host)
+static int dsi_link_clk_enable_v2(struct msm_dsi_host *msm_host)
 {
+	int ret;
+
+	DBG("Set clk rates: pclk=%d, byteclk=%d, esc_clk=%d, dsi_src_clk=%d",
+		msm_host->mode->clock, msm_host->byte_clk_rate,
+		msm_host->esc_clk_rate, msm_host->src_clk_rate);
+
+	ret = clk_set_rate(msm_host->byte_clk, msm_host->byte_clk_rate);
+	if (ret) {
+		pr_err("%s: Failed to set rate byte clk, %d\n", __func__, ret);
+		goto error;
+	}
+
+	ret = clk_set_rate(msm_host->esc_clk, msm_host->esc_clk_rate);
+	if (ret) {
+		pr_err("%s: Failed to set rate esc clk, %d\n", __func__, ret);
+		goto error;
+	}
+
+	ret = clk_set_rate(msm_host->src_clk, msm_host->src_clk_rate);
+	if (ret) {
+		pr_err("%s: Failed to set rate src clk, %d\n", __func__, ret);
+		goto error;
+	}
+
+	ret = clk_set_rate(msm_host->pixel_clk, msm_host->mode->clock * 1000);
+	if (ret) {
+		pr_err("%s: Failed to set rate pixel clk, %d\n", __func__, ret);
+		goto error;
+	}
+
+	ret = clk_prepare_enable(msm_host->byte_clk);
+	if (ret) {
+		pr_err("%s: Failed to enable dsi byte clk\n", __func__);
+		goto error;
+	}
+
+	ret = clk_prepare_enable(msm_host->esc_clk);
+	if (ret) {
+		pr_err("%s: Failed to enable dsi esc clk\n", __func__);
+		goto esc_clk_err;
+	}
+
+	ret = clk_prepare_enable(msm_host->src_clk);
+	if (ret) {
+		pr_err("%s: Failed to enable dsi src clk\n", __func__);
+		goto src_clk_err;
+	}
+
+	ret = clk_prepare_enable(msm_host->pixel_clk);
+	if (ret) {
+		pr_err("%s: Failed to enable dsi pixel clk\n", __func__);
+		goto pixel_clk_err;
+	}
+
+	return 0;
+
+pixel_clk_err:
+	clk_disable_unprepare(msm_host->src_clk);
+src_clk_err:
 	clk_disable_unprepare(msm_host->esc_clk);
-	clk_disable_unprepare(msm_host->pixel_clk);
+esc_clk_err:
 	clk_disable_unprepare(msm_host->byte_clk);
+error:
+	return ret;
+}
+
+static int dsi_link_clk_enable(struct msm_dsi_host *msm_host)
+{
+	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
+
+	if (cfg_hnd->major == MSM_DSI_VER_MAJOR_6G)
+		return dsi_link_clk_enable_6g(msm_host);
+	else
+		return dsi_link_clk_enable_v2(msm_host);
+}
+
+static void dsi_link_clk_disable(struct msm_dsi_host *msm_host)
+{
+	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
+
+	if (cfg_hnd->major == MSM_DSI_VER_MAJOR_6G) {
+		clk_disable_unprepare(msm_host->esc_clk);
+		clk_disable_unprepare(msm_host->pixel_clk);
+		clk_disable_unprepare(msm_host->byte_clk);
+	} else {
+		clk_disable_unprepare(msm_host->pixel_clk);
+		clk_disable_unprepare(msm_host->src_clk);
+		clk_disable_unprepare(msm_host->esc_clk);
+		clk_disable_unprepare(msm_host->byte_clk);
+	}
 }
 
 static int dsi_clk_ctrl(struct msm_dsi_host *msm_host, bool enable)
@@ -499,6 +621,7 @@ unlock_ret:
 static int dsi_calc_clk_rate(struct msm_dsi_host *msm_host)
 {
 	struct drm_display_mode *mode = msm_host->mode;
+	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
 	u8 lanes = msm_host->lanes;
 	u32 bpp = dsi_get_bpp(msm_host->format);
 	u32 pclk_rate;
@@ -518,6 +641,47 @@ static int dsi_calc_clk_rate(struct msm_dsi_host *msm_host)
 
 	DBG("pclk=%d, bclk=%d", pclk_rate, msm_host->byte_clk_rate);
 
+	msm_host->esc_clk_rate = clk_get_rate(msm_host->esc_clk);
+
+	if (cfg_hnd->major == MSM_DSI_VER_MAJOR_V2) {
+		unsigned int esc_mhz, esc_div;
+		unsigned long byte_mhz;
+
+		msm_host->src_clk_rate = (pclk_rate * bpp) / 8;
+
+		/*
+		 * esc clock is byte clock followed by a 4 bit divider,
+		 * we need to find an escape clock frequency within the
+		 * mipi DSI spec range within the maximum divider limit
+		 * We iterate here between an escape clock frequencey
+		 * between 20 Mhz to 5 Mhz and pick up the first one
+		 * that can be supported by our divider
+		 */
+
+		byte_mhz = msm_host->byte_clk_rate / 1000000;
+
+		for (esc_mhz = 20; esc_mhz >= 5; esc_mhz--) {
+			esc_div = DIV_ROUND_UP(byte_mhz, esc_mhz);
+
+			/*
+			 * TODO: Ideally, we shouldn't know what sort of divider
+			 * is available in mmss_cc, we're just assuming that
+			 * it'll always be a 4 bit divider. Need to come up with
+			 * a better way here.
+			 */
+			if (esc_div >= 1 && esc_div <= 16)
+				break;
+		}
+
+		if (esc_mhz < 5)
+			return -EINVAL;
+
+		msm_host->esc_clk_rate = msm_host->byte_clk_rate / esc_div;
+
+		DBG("esc=%d, src=%d", msm_host->esc_clk_rate,
+			msm_host->src_clk_rate);
+	}
+
 	return 0;
 }
 
@@ -1750,6 +1914,7 @@ int msm_dsi_host_set_src_pll(struct mipi_dsi_host *host,
 	struct msm_dsi_pll *src_pll)
 {
 	struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
+	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
 	struct clk *byte_clk_provider, *pixel_clk_provider;
 	int ret;
 
@@ -1775,6 +1940,22 @@ int msm_dsi_host_set_src_pll(struct mipi_dsi_host *host,
 		goto exit;
 	}
 
+	if (cfg_hnd->major == MSM_DSI_VER_MAJOR_V2) {
+		ret = clk_set_parent(msm_host->dsi_clk_src, pixel_clk_provider);
+		if (ret) {
+			pr_err("%s: can't set parent to dsi_clk_src. ret=%d\n",
+				__func__, ret);
+			goto exit;
+		}
+
+		ret = clk_set_parent(msm_host->esc_clk_src, byte_clk_provider);
+		if (ret) {
+			pr_err("%s: can't set parent to esc_clk_src. ret=%d\n",
+				__func__, ret);
+			goto exit;
+		}
+	}
+
 exit:
 	return ret;
 }
@@ -1846,7 +2027,7 @@ int msm_dsi_host_power_on(struct mipi_dsi_host *host)
 	dsi_phy_sw_reset(msm_host);
 	ret = msm_dsi_manager_phy_enable(msm_host->id,
 					msm_host->byte_clk_rate * 8,
-					clk_get_rate(msm_host->esc_clk),
+					msm_host->esc_clk_rate,
 					&clk_pre, &clk_post);
 	dsi_bus_clk_disable(msm_host);
 	if (ret) {
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 08/12] drm/msm/dsi: Add dsi_cfg for APQ8064

[Archit Taneja]

Add a dsi_cfg entry for APQ8064. Since this is the first DSIv2 chip to
be supported, add a list of bus clocks that are required by the DSIv2
block.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/dsi_cfg.c | 19 ++++++++++++++++---
 drivers/gpu/drm/msm/dsi/dsi_cfg.h |  2 ++
 2 files changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.c b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
index c40044f..2a827d8 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
@@ -13,9 +13,22 @@
 
 #include "dsi_cfg.h"
 
-/* DSI v2 has not been supported by now */
-static const struct msm_dsi_config dsi_v2_cfg = {
+static const char * const dsi_v2_bus_clk_names[] = {
+	"core_mmss_clk", "iface_clk", "bus_clk",
+};
+
+static const struct msm_dsi_config apq8064_dsi_cfg = {
 	.io_offset = 0,
+	.reg_cfg = {
+		.num = 3,
+		.regs = {
+			{"vdda", 1200000, 1200000, 100000, 100},
+			{"avdd", 3000000, 3000000, 110000, 100},
+			{"vddio", 1800000, 1800000, 100000, 100},
+		},
+	},
+	.bus_clk_names = dsi_v2_bus_clk_names,
+	.num_bus_clks = ARRAY_SIZE(dsi_v2_bus_clk_names),
 };
 
 static const char * const dsi_6g_bus_clk_names[] = {
@@ -75,7 +88,7 @@ static const struct msm_dsi_config msm8994_dsi_cfg = {
 };
 
 static const struct msm_dsi_cfg_handler dsi_cfg_handlers[] = {
-	{MSM_DSI_VER_MAJOR_V2, U32_MAX, &dsi_v2_cfg},
+	{MSM_DSI_VER_MAJOR_V2, MSM_DSI_V2_VER_MINOR_8064, &apq8064_dsi_cfg},
 	{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V1_0,
 						&msm8974_apq8084_dsi_cfg},
 	{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V1_1,
diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.h b/drivers/gpu/drm/msm/dsi/dsi_cfg.h
index 5a36836..a68c836 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.h
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.h
@@ -25,6 +25,8 @@
 #define MSM_DSI_6G_VER_MINOR_V1_3	0x10030000
 #define MSM_DSI_6G_VER_MINOR_V1_3_1	0x10030001
 
+#define MSM_DSI_V2_VER_MINOR_8064	0x0
+
 #define DSI_6G_REG_SHIFT	4
 
 struct msm_dsi_config {
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 09/12] drm/msm/dsi: Don't use iommu for command TX buffer for DSIv2

[Archit Taneja]

We currently use iommu allocated DMA buffers for sending DSI commands.
DSIv2 doesn't have a port connected to the MDP iommu. Therefore, it
can't use iommu allocated buffers to fetch DSI commands.

Use a regular contiguous DMA buffer if we are DSIv2.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/dsi.h         |   4 +-
 drivers/gpu/drm/msm/dsi/dsi_host.c    | 110 +++++++++++++++++++++++-----------
 drivers/gpu/drm/msm/dsi/dsi_manager.c |   6 +-
 3 files changed, 79 insertions(+), 41 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h
index 7336b55..749fbb2 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.h
+++ b/drivers/gpu/drm/msm/dsi/dsi.h
@@ -91,7 +91,7 @@ int msm_dsi_manager_phy_enable(int id,
 		u32 *clk_pre, u32 *clk_post);
 void msm_dsi_manager_phy_disable(int id);
 int msm_dsi_manager_cmd_xfer(int id, const struct mipi_dsi_msg *msg);
-bool msm_dsi_manager_cmd_xfer_trigger(int id, u32 iova, u32 len);
+bool msm_dsi_manager_cmd_xfer_trigger(int id, u32 dma_base, u32 len);
 int msm_dsi_manager_register(struct msm_dsi *msm_dsi);
 void msm_dsi_manager_unregister(struct msm_dsi *msm_dsi);
 
@@ -145,7 +145,7 @@ int msm_dsi_host_cmd_tx(struct mipi_dsi_host *host,
 int msm_dsi_host_cmd_rx(struct mipi_dsi_host *host,
 					const struct mipi_dsi_msg *msg);
 void msm_dsi_host_cmd_xfer_commit(struct mipi_dsi_host *host,
-					u32 iova, u32 len);
+					u32 dma_base, u32 len);
 int msm_dsi_host_enable(struct mipi_dsi_host *host);
 int msm_dsi_host_disable(struct mipi_dsi_host *host);
 int msm_dsi_host_power_on(struct mipi_dsi_host *host);
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 6ec2178..bbf7f72 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -138,7 +138,15 @@ struct msm_dsi_host {
 	struct work_struct err_work;
 	struct workqueue_struct *workqueue;
 
+	/* DSI 6G TX buffer*/
 	struct drm_gem_object *tx_gem_obj;
+
+	/* DSI v2 TX buffer */
+	void *tx_buf;
+	dma_addr_t tx_buf_paddr;
+
+	int tx_size;
+
 	u8 *rx_buf;
 
 	struct drm_display_mode *mode;
@@ -983,29 +991,46 @@ static void dsi_wait4video_eng_busy(struct msm_dsi_host *msm_host)
 static int dsi_tx_buf_alloc(struct msm_dsi_host *msm_host, int size)
 {
 	struct drm_device *dev = msm_host->dev;
+	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
 	int ret;
 	u32 iova;
 
-	mutex_lock(&dev->struct_mutex);
-	msm_host->tx_gem_obj = msm_gem_new(dev, size, MSM_BO_UNCACHED);
-	if (IS_ERR(msm_host->tx_gem_obj)) {
-		ret = PTR_ERR(msm_host->tx_gem_obj);
-		pr_err("%s: failed to allocate gem, %d\n", __func__, ret);
-		msm_host->tx_gem_obj = NULL;
+	if (cfg_hnd->major == MSM_DSI_VER_MAJOR_6G) {
+		mutex_lock(&dev->struct_mutex);
+		msm_host->tx_gem_obj = msm_gem_new(dev, size, MSM_BO_UNCACHED);
+		if (IS_ERR(msm_host->tx_gem_obj)) {
+			ret = PTR_ERR(msm_host->tx_gem_obj);
+			pr_err("%s: failed to allocate gem, %d\n",
+				__func__, ret);
+			msm_host->tx_gem_obj = NULL;
+			mutex_unlock(&dev->struct_mutex);
+			return ret;
+		}
+
+		ret = msm_gem_get_iova_locked(msm_host->tx_gem_obj, 0, &iova);
+		if (ret) {
+			pr_err("%s: failed to get iova, %d\n", __func__, ret);
+			return ret;
+		}
 		mutex_unlock(&dev->struct_mutex);
-		return ret;
-	}
 
-	ret = msm_gem_get_iova_locked(msm_host->tx_gem_obj, 0, &iova);
-	if (ret) {
-		pr_err("%s: failed to get iova, %d\n", __func__, ret);
-		return ret;
-	}
-	mutex_unlock(&dev->struct_mutex);
+		if (iova & 0x07) {
+			pr_err("%s: buf NOT 8 bytes aligned\n", __func__);
+			return -EINVAL;
+		}
 
-	if (iova & 0x07) {
-		pr_err("%s: buf NOT 8 bytes aligned\n", __func__);
-		return -EINVAL;
+		msm_host->tx_size = msm_host->tx_gem_obj->size;
+	} else {
+		msm_host->tx_buf = dma_alloc_coherent(dev->dev, size,
+					&msm_host->tx_buf_paddr, GFP_KERNEL);
+		if (!msm_host->tx_buf) {
+			ret = -ENOMEM;
+			pr_err("%s: failed to allocate tx buf, %d\n",
+				__func__, ret);
+			return ret;
+		}
+
+		msm_host->tx_size = size;
 	}
 
 	return 0;
@@ -1022,14 +1047,19 @@ static void dsi_tx_buf_free(struct msm_dsi_host *msm_host)
 		msm_host->tx_gem_obj = NULL;
 		mutex_unlock(&dev->struct_mutex);
 	}
+
+	if (msm_host->tx_buf)
+		dma_free_coherent(dev->dev, msm_host->tx_size, msm_host->tx_buf,
+			msm_host->tx_buf_paddr);
 }
 
 /*
  * prepare cmd buffer to be txed
  */
-static int dsi_cmd_dma_add(struct drm_gem_object *tx_gem,
-			const struct mipi_dsi_msg *msg)
+static int dsi_cmd_dma_add(struct msm_dsi_host *msm_host,
+			   const struct mipi_dsi_msg *msg)
 {
+	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
 	struct mipi_dsi_packet packet;
 	int len;
 	int ret;
@@ -1042,17 +1072,20 @@ static int dsi_cmd_dma_add(struct drm_gem_object *tx_gem,
 	}
 	len = (packet.size + 3) & (~0x3);
 
-	if (len > tx_gem->size) {
+	if (len > msm_host->tx_size) {
 		pr_err("%s: packet size is too big\n", __func__);
 		return -EINVAL;
 	}
 
-	data = msm_gem_vaddr(tx_gem);
-
-	if (IS_ERR(data)) {
-		ret = PTR_ERR(data);
-		pr_err("%s: get vaddr failed, %d\n", __func__, ret);
-		return ret;
+	if (cfg_hnd->major == MSM_DSI_VER_MAJOR_6G) {
+		data = msm_gem_vaddr(msm_host->tx_gem_obj);
+		if (IS_ERR(data)) {
+			ret = PTR_ERR(data);
+			pr_err("%s: get vaddr failed, %d\n", __func__, ret);
+			return ret;
+		}
+	} else {
+		data = msm_host->tx_buf;
 	}
 
 	/* MSM specific command format in memory */
@@ -1118,17 +1151,21 @@ static int dsi_long_read_resp(u8 *buf, const struct mipi_dsi_msg *msg)
 	return msg->rx_len;
 }
 
-
 static int dsi_cmd_dma_tx(struct msm_dsi_host *msm_host, int len)
 {
+	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
 	int ret;
-	u32 iova;
+	u32 dma_base;
 	bool triggered;
 
-	ret = msm_gem_get_iova(msm_host->tx_gem_obj, 0, &iova);
-	if (ret) {
-		pr_err("%s: failed to get iova: %d\n", __func__, ret);
-		return ret;
+	if (cfg_hnd->major == MSM_DSI_VER_MAJOR_6G) {
+		ret = msm_gem_get_iova(msm_host->tx_gem_obj, 0, &dma_base);
+		if (ret) {
+			pr_err("%s: failed to get iova: %d\n", __func__, ret);
+			return ret;
+		}
+	} else {
+		dma_base = msm_host->tx_buf_paddr;
 	}
 
 	reinit_completion(&msm_host->dma_comp);
@@ -1136,7 +1173,7 @@ static int dsi_cmd_dma_tx(struct msm_dsi_host *msm_host, int len)
 	dsi_wait4video_eng_busy(msm_host);
 
 	triggered = msm_dsi_manager_cmd_xfer_trigger(
-						msm_host->id, iova, len);
+						msm_host->id, dma_base, len);
 	if (triggered) {
 		ret = wait_for_completion_timeout(&msm_host->dma_comp,
 					msecs_to_jiffies(200));
@@ -1208,7 +1245,7 @@ static int dsi_cmds2buf_tx(struct msm_dsi_host *msm_host,
 	int bllp_len = msm_host->mode->hdisplay *
 			dsi_get_bpp(msm_host->format) / 8;
 
-	len = dsi_cmd_dma_add(msm_host->tx_gem_obj, msg);
+	len = dsi_cmd_dma_add(msm_host, msg);
 	if (!len) {
 		pr_err("%s: failed to add cmd type = 0x%x\n",
 			__func__,  msg->type);
@@ -1898,11 +1935,12 @@ int msm_dsi_host_cmd_rx(struct mipi_dsi_host *host,
 	return ret;
 }
 
-void msm_dsi_host_cmd_xfer_commit(struct mipi_dsi_host *host, u32 iova, u32 len)
+void msm_dsi_host_cmd_xfer_commit(struct mipi_dsi_host *host, u32 dma_base,
+				  u32 len)
 {
 	struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
 
-	dsi_write(msm_host, REG_DSI_DMA_BASE, iova);
+	dsi_write(msm_host, REG_DSI_DMA_BASE, dma_base);
 	dsi_write(msm_host, REG_DSI_DMA_LEN, len);
 	dsi_write(msm_host, REG_DSI_TRIG_DMA, 1);
 
diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c
index 0455ff7..58ba7ec 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_manager.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c
@@ -774,7 +774,7 @@ restore_host0:
 	return ret;
 }
 
-bool msm_dsi_manager_cmd_xfer_trigger(int id, u32 iova, u32 len)
+bool msm_dsi_manager_cmd_xfer_trigger(int id, u32 dma_base, u32 len)
 {
 	struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
 	struct msm_dsi *msm_dsi0 = dsi_mgr_get_dsi(DSI_0);
@@ -784,9 +784,9 @@ bool msm_dsi_manager_cmd_xfer_trigger(int id, u32 iova, u32 len)
 		return false;
 
 	if (IS_SYNC_NEEDED() && msm_dsi0)
-		msm_dsi_host_cmd_xfer_commit(msm_dsi0->host, iova, len);
+		msm_dsi_host_cmd_xfer_commit(msm_dsi0->host, dma_base, len);
 
-	msm_dsi_host_cmd_xfer_commit(host, iova, len);
+	msm_dsi_host_cmd_xfer_commit(host, dma_base, len);
 
 	return true;
 }
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 10/12] drm/msm/dsi: Enable MMSS SPFB port via syscon

[Archit Taneja]

For DSIv2 to work, we need to enable MMSS_AHB_ARB_MASTER_PORT in
MMSS_SFPB. We enable the required bitfield by retrieving MMSS_SFPB
regmap pointer via syscon.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index bbf7f72..f61b88e 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -24,10 +24,13 @@
 #include <linux/of_graph.h>
 #include <linux/regulator/consumer.h>
 #include <linux/spinlock.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 #include <video/mipi_display.h>
 
 #include "dsi.h"
 #include "dsi.xml.h"
+#include "sfpb.xml.h"
 #include "dsi_cfg.h"
 
 static int dsi_get_version(const void __iomem *base, u32 *major, u32 *minor)
@@ -149,6 +152,8 @@ struct msm_dsi_host {
 
 	u8 *rx_buf;
 
+	struct regmap *sfpb;
+
 	struct drm_display_mode *mode;
 
 	/* connected device info */
@@ -1568,6 +1573,16 @@ static int dsi_host_parse_dt(struct msm_dsi_host *msm_host)
 
 	msm_host->device_node = device_node;
 
+	if (of_property_read_bool(np, "syscon-sfpb")) {
+		msm_host->sfpb = syscon_regmap_lookup_by_phandle(np,
+					"syscon-sfpb");
+		if (IS_ERR(msm_host->sfpb)) {
+			dev_err(dev, "%s: failed to get sfpb regmap\n",
+				__func__);
+			return PTR_ERR(msm_host->sfpb);
+		}
+	}
+
 	return 0;
 }
 
@@ -2031,6 +2046,20 @@ int msm_dsi_host_disable(struct mipi_dsi_host *host)
 	return 0;
 }
 
+static void msm_dsi_sfpb_config(struct msm_dsi_host *msm_host, bool enable)
+{
+	enum sfpb_ahb_arb_master_port_en en;
+
+	if (!msm_host->sfpb)
+		return;
+
+	en = enable ? SFPB_MASTER_PORT_ENABLE : SFPB_MASTER_PORT_DISABLE;
+
+	regmap_update_bits(msm_host->sfpb, REG_SFPB_GPREG,
+			SFPB_GPREG_MASTER_PORT_EN__MASK,
+			SFPB_GPREG_MASTER_PORT_EN(en));
+}
+
 int msm_dsi_host_power_on(struct mipi_dsi_host *host)
 {
 	struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
@@ -2043,6 +2072,8 @@ int msm_dsi_host_power_on(struct mipi_dsi_host *host)
 		goto unlock_ret;
 	}
 
+	msm_dsi_sfpb_config(msm_host, true);
+
 	ret = dsi_calc_clk_rate(msm_host);
 	if (ret) {
 		pr_err("%s: unable to calc clk rate, %d\n", __func__, ret);
@@ -2130,6 +2161,8 @@ int msm_dsi_host_power_off(struct mipi_dsi_host *host)
 
 	dsi_host_regulator_disable(msm_host);
 
+	msm_dsi_sfpb_config(msm_host, false);
+
 	DBG("-");
 
 	msm_host->power_on = false;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

[PATCH v3 11/12] dt-bindings: msm/dsi: Fix the order in which clocks are listed

[Archit Taneja]

List the clocks in the order that's used in DT. We don't have mdp/dsi
DT nodes for any SoC in upstream yet, but we align with the order
we intend to use.

Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 Documentation/devicetree/bindings/display/msm/dsi.txt | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index f344b9e..e097955 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -14,13 +14,13 @@ Required properties:
 - clocks: device clocks
   See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
 - clock-names: the following clocks are required:
+  * "mdp_core_clk"
+  * "iface_clk"
   * "bus_clk"
-  * "byte_clk"
-  * "core_clk"
   * "core_mmss_clk"
-  * "iface_clk"
-  * "mdp_core_clk"
+  * "byte_clk"
   * "pixel_clk"
+  * "core_clk"
 - vdd-supply: phandle to vdd regulator device node
 - vddio-supply: phandle to vdd-io regulator device node
 - vdda-supply: phandle to vdda regulator device node
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

[PATCH v3 12/12] dt-bindings: msm/dsi: Add DSIv2 documentation

[Archit Taneja]

Add additional property info needed for DSIv2 DT.

Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 Documentation/devicetree/bindings/display/msm/dsi.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index e097955..e7423be 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -21,10 +21,13 @@ Required properties:
   * "byte_clk"
   * "pixel_clk"
   * "core_clk"
+  For DSIv2, we need an additional clock:
+   * "src_clk"
 - vdd-supply: phandle to vdd regulator device node
 - vddio-supply: phandle to vdd-io regulator device node
 - vdda-supply: phandle to vdda regulator device node
 - qcom,dsi-phy: phandle to DSI PHY device node
+- syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2)
 
 Optional properties:
 - panel@0: Node of panel connected to this DSI controller.
@@ -51,6 +54,7 @@ Required properties:
   * "qcom,dsi-phy-28nm-hpm"
   * "qcom,dsi-phy-28nm-lp"
   * "qcom,dsi-phy-20nm"
+  * "qcom,dsi-phy-28nm-8960"
 - reg: Physical base address and length of the registers of PLL, PHY and PHY
   regulator
 - reg-names: The names of register regions. The following regions are required:
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 10/10] dt-bindings: Add DSIv2 documentation

[Stephen Boyd]

On 11/23, Archit Taneja wrote:
> 
> 
> On 11/21/2015 1:29 AM, Rob Herring wrote:
> >+Stephen
> >
> >On Wed, Nov 18, 2015 at 9:24 AM, Archit Taneja <architt@codeaurora.org> wrote:
> >>Hi Rob,
> >>
> >>On 11/18/2015 6:48 PM, Rob Herring wrote:
> >>>
> >>>+dt list
> >>>
> >>>On Wed, Nov 18, 2015 at 4:55 AM, Archit Taneja <architt@codeaurora.org>
> >>>wrote:
> >>>>
> >>>>Add additional property info needed for DSIv2 DT.
> >>>
> >>>
> >>>Please use get_maintainers.pl.
> >>
> >>
> >>Sorry about that, missed out doing that posting this time.
> >>
> >>>
> >>>>Signed-off-by: Archit Taneja <architt@codeaurora.org>
> >>>>---
> >>>>   Documentation/devicetree/bindings/display/msm/dsi.txt | 10 +++++++++-
> >>>>   1 file changed, 9 insertions(+), 1 deletion(-)
> >>>>
> >>>>diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt
> >>>>b/Documentation/devicetree/bindings/display/msm/dsi.txt
> >>>>index f344b9e..ca65a34 100644
> >>>>--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
> >>>>+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
> >>>>@@ -13,18 +13,25 @@ Required properties:
> >>>>   - power-domains: Should be <&mmcc MDSS_GDSC>.
> >>>>   - clocks: device clocks
> >>>>     See Documentation/devicetree/bindings/clocks/clock-bindings.txt for
> >>>>details.
> >>>>-- clock-names: the following clocks are required:
> >>>>+- clock-names: these vary based on the DSI version. For DSI6G:
> >>>>     * "bus_clk"
> >>>>     * "byte_clk"
> >>>>+  * "byte_clk_src
> >>>
> >>>
> >>>This sounds like the parent of byte_clk. Is that really a clock within
> >>>the block?
> >>
> >>
> >>byte_clk_src isn't in the block, but byte_clk_src's parent is one of
> >>the PLLs in this block. We take this clock so that we can re-parent
> >>it to an appropriate PLL. The decision of what PLL to choose needs to
> >>be done by the DSI block's driver.
> >
> >Seems like abuse to me. The list of clocks should match what are
> >inputs to the block, not what the driver happens to need. Without a
> >full understanding of the clock tree here, I don't have a suggestion.
> >Maybe Stephen does.
> 
> We don't need specify byte_clk_src (and other xyz_clk_src clocks) via
> DT. There is a static link set up between byte_clk and byte_clk_src by
> our clock driver that never changes. We can retrieve it in the driver
> itself using clk_get_parent(byte_clk). This way we stick to only
> input clocks.
> 
> Stephen, does that sound okay?
> 

I guess so. From the DT perspective it's "correct" so sure.

It would be nice if we could use assigned-clock-parents though.
As far as I can recall that's hard because the clock tree looks
like a cyclic graph when we take a clock provider level view. The
display block consumes the byte_clk and provides the source of it
too. So if we used assigned parents we would need to wait for
both clocks to be registered with the framework before we can
reconfigure the parent of byte_clk_src to be the PLL that the
display clock outputs. Unfortunately, of_clk_set_defaults() is
called during device driver probe, which in the display driver
case would be before the PLL is registered.

My only thought there would be to make of_clk_set_defaults() wait
until both clocks are registered before it does any parent
setting. But only in the case where the assigned parents contains
a clock that is provided by the node being processed. I suppose
the simplest thing to do would be to skip it during the device
driver probe and handle it when the clk provider is registered.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH v2 10/10] dt-bindings: Add DSIv2 documentation

[Stephen Boyd]

On 12/02, Stephen Boyd wrote:
> 
> My only thought there would be to make of_clk_set_defaults() wait
> until both clocks are registered before it does any parent
> setting. But only in the case where the assigned parents contains
> a clock that is provided by the node being processed. I suppose
> the simplest thing to do would be to skip it during the device
> driver probe and handle it when the clk provider is registered.
> 

Actually it looks like we already have the code for that.

	if (clkspec.np == node && !clk_supplier)
		return 0;

So assigned parents should "just work"?

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 10/10] dt-bindings: Add DSIv2 documentation

[Archit Taneja]

On 12/02/2015 01:50 PM, Stephen Boyd wrote:
> On 11/23, Archit Taneja wrote:
>>
>>
>> On 11/21/2015 1:29 AM, Rob Herring wrote:
>>> +Stephen
>>>
>>> On Wed, Nov 18, 2015 at 9:24 AM, Archit Taneja <architt@codeaurora.org> wrote:
>>>> Hi Rob,
>>>>
>>>> On 11/18/2015 6:48 PM, Rob Herring wrote:
>>>>>
>>>>> +dt list
>>>>>
>>>>> On Wed, Nov 18, 2015 at 4:55 AM, Archit Taneja <architt@codeaurora.org>
>>>>> wrote:
>>>>>>
>>>>>> Add additional property info needed for DSIv2 DT.
>>>>>
>>>>>
>>>>> Please use get_maintainers.pl.
>>>>
>>>>
>>>> Sorry about that, missed out doing that posting this time.
>>>>
>>>>>
>>>>>> Signed-off-by: Archit Taneja <architt@codeaurora.org>
>>>>>> ---
>>>>>>    Documentation/devicetree/bindings/display/msm/dsi.txt | 10 +++++++++-
>>>>>>    1 file changed, 9 insertions(+), 1 deletion(-)
>>>>>>
>>>>>> diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt
>>>>>> b/Documentation/devicetree/bindings/display/msm/dsi.txt
>>>>>> index f344b9e..ca65a34 100644
>>>>>> --- a/Documentation/devicetree/bindings/display/msm/dsi.txt
>>>>>> +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
>>>>>> @@ -13,18 +13,25 @@ Required properties:
>>>>>>    - power-domains: Should be <&mmcc MDSS_GDSC>.
>>>>>>    - clocks: device clocks
>>>>>>      See Documentation/devicetree/bindings/clocks/clock-bindings.txt for
>>>>>> details.
>>>>>> -- clock-names: the following clocks are required:
>>>>>> +- clock-names: these vary based on the DSI version. For DSI6G:
>>>>>>      * "bus_clk"
>>>>>>      * "byte_clk"
>>>>>> +  * "byte_clk_src
>>>>>
>>>>>
>>>>> This sounds like the parent of byte_clk. Is that really a clock within
>>>>> the block?
>>>>
>>>>
>>>> byte_clk_src isn't in the block, but byte_clk_src's parent is one of
>>>> the PLLs in this block. We take this clock so that we can re-parent
>>>> it to an appropriate PLL. The decision of what PLL to choose needs to
>>>> be done by the DSI block's driver.
>>>
>>> Seems like abuse to me. The list of clocks should match what are
>>> inputs to the block, not what the driver happens to need. Without a
>>> full understanding of the clock tree here, I don't have a suggestion.
>>> Maybe Stephen does.
>>
>> We don't need specify byte_clk_src (and other xyz_clk_src clocks) via
>> DT. There is a static link set up between byte_clk and byte_clk_src by
>> our clock driver that never changes. We can retrieve it in the driver
>> itself using clk_get_parent(byte_clk). This way we stick to only
>> input clocks.
>>
>> Stephen, does that sound okay?
>>
>
> I guess so. From the DT perspective it's "correct" so sure.
>
> It would be nice if we could use assigned-clock-parents though.
> As far as I can recall that's hard because the clock tree looks
> like a cyclic graph when we take a clock provider level view. The
> display block consumes the byte_clk and provides the source of it
> too. So if we used assigned parents we would need to wait for
> both clocks to be registered with the framework before we can
> reconfigure the parent of byte_clk_src to be the PLL that the
> display clock outputs. Unfortunately, of_clk_set_defaults() is
> called during device driver probe, which in the display driver
> case would be before the PLL is registered.
>
> My only thought there would be to make of_clk_set_defaults() wait
> until both clocks are registered before it does any parent
> setting. But only in the case where the assigned parents contains
> a clock that is provided by the node being processed. I suppose
> the simplest thing to do would be to skip it during the device
> driver probe and handle it when the clk provider is registered.
>

The assigned-clock-parents stuff you mentioned is needed to set a 
default link between the one of the DSI PLLs and the RCG, right? I just 
wanted to make clear if we were still discussing the same issue.

 From what I understand, we don't need the assigned-clock-parents stuff
to establish a link between byte_clk_src(RCG clock) and byte_clk(branch 
clock). That's a fixed link set up by the clock structs provided in the 
gcc driver and doesn't need to be specially assigned, and just a
clk_get_parent in the driver does the job there.

About assigning a parent to the RCG, wouldn't that be xo by default, and
changed by the drm/msm driver to one of the PLLs when the need arrives?
I didn't get why we need to establish that beforehand in DT?

Archit

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
Forum, hosted by The Linux Foundation
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 10/10] dt-bindings: Add DSIv2 documentation

[Stephen Boyd]

On 12/02, Archit Taneja wrote:
> On 12/02/2015 01:50 PM, Stephen Boyd wrote:
> >
> >My only thought there would be to make of_clk_set_defaults() wait
> >until both clocks are registered before it does any parent
> >setting. But only in the case where the assigned parents contains
> >a clock that is provided by the node being processed. I suppose
> >the simplest thing to do would be to skip it during the device
> >driver probe and handle it when the clk provider is registered.
> >
> 
> The assigned-clock-parents stuff you mentioned is needed to set a
> default link between the one of the DSI PLLs and the RCG, right? I
> just wanted to make clear if we were still discussing the same
> issue.

Yes.

> 
> From what I understand, we don't need the assigned-clock-parents stuff
> to establish a link between byte_clk_src(RCG clock) and
> byte_clk(branch clock). That's a fixed link set up by the clock
> structs provided in the gcc driver and doesn't need to be specially
> assigned, and just a
> clk_get_parent in the driver does the job there.

There's only one parent of the byte_clk and that's byte_clk_src.
So yes, there's no need to describe that in DT and
clk_get_parent() works fine.

> 
> About assigning a parent to the RCG, wouldn't that be xo by default, and
> changed by the drm/msm driver to one of the PLLs when the need arrives?
> I didn't get why we need to establish that beforehand in DT?
> 

Yes, it would be XO out of reset, but we have no idea what the
bootloader is doing. I thought the problem was that byte_clk_src
is not actually an input to the DSI device. The proposal was to
have DT specify byte_clk_src and byte_clk in the clocks array so
that byte_clk_src could be reparented to the PLL and the byte_clk
could be enabled/disabled. If we use DT to do the parent
configuring then the DSI node doesn't have the byte_clk_src in
its clocks array and thus DT is reflecting reality.

If we want to dynamically switch the parent of byte_clk_src to be
different PLLs at runtime, then yes we'll need to get the parent
of the byte_clk (which is byte_clk_src) and set the PLL as the
parent. Or we'll need to make clk_set_parent() on the byte_clk
transparently set the grand-parent to be the PLL. In that case we
may need to introduce some sort of flag like
CLK_SET_PARENT_GRANDPARENT to add this type of behavior.

I don't have a huge problem with

	clk_set_parent(clk_get_parent(byte_clk), PLL)

except that this fails the abstraction test. It leaks information
about the clock tree into a driver that shouldn't need to know
that on this particular SoC there's a clock in between the PLL
and the byte_clk. Future designs may not have the intermediate
clock and then we'll need to update the driver to handle the
difference, when we could have added the flag and things would
work the same.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH v2 10/10] dt-bindings: Add DSIv2 documentation

[Archit Taneja]

On 12/03/2015 12:46 PM, Stephen Boyd wrote:
> On 12/02, Archit Taneja wrote:
>> On 12/02/2015 01:50 PM, Stephen Boyd wrote:
>>>
>>> My only thought there would be to make of_clk_set_defaults() wait
>>> until both clocks are registered before it does any parent
>>> setting. But only in the case where the assigned parents contains
>>> a clock that is provided by the node being processed. I suppose
>>> the simplest thing to do would be to skip it during the device
>>> driver probe and handle it when the clk provider is registered.
>>>
>>
>> The assigned-clock-parents stuff you mentioned is needed to set a
>> default link between the one of the DSI PLLs and the RCG, right? I
>> just wanted to make clear if we were still discussing the same
>> issue.
>
> Yes.
>
>>
>>  From what I understand, we don't need the assigned-clock-parents stuff
>> to establish a link between byte_clk_src(RCG clock) and
>> byte_clk(branch clock). That's a fixed link set up by the clock
>> structs provided in the gcc driver and doesn't need to be specially
>> assigned, and just a
>> clk_get_parent in the driver does the job there.
>
> There's only one parent of the byte_clk and that's byte_clk_src.
> So yes, there's no need to describe that in DT and
> clk_get_parent() works fine.
>
>>
>> About assigning a parent to the RCG, wouldn't that be xo by default, and
>> changed by the drm/msm driver to one of the PLLs when the need arrives?
>> I didn't get why we need to establish that beforehand in DT?
>>
>
> Yes, it would be XO out of reset, but we have no idea what the
> bootloader is doing. I thought the problem was that byte_clk_src
> is not actually an input to the DSI device. The proposal was to
> have DT specify byte_clk_src and byte_clk in the clocks array so
> that byte_clk_src could be reparented to the PLL and the byte_clk
> could be enabled/disabled. If we use DT to do the parent
> configuring then the DSI node doesn't have the byte_clk_src in
> its clocks array and thus DT is reflecting reality.

Okay, I understand your point now.

>
> If we want to dynamically switch the parent of byte_clk_src to be
> different PLLs at runtime, then yes we'll need to get the parent
> of the byte_clk (which is byte_clk_src) and set the PLL as the
> parent. Or we'll need to make clk_set_parent() on the byte_clk
> transparently set the grand-parent to be the PLL. In that case we
> may need to introduce some sort of flag like
> CLK_SET_PARENT_GRANDPARENT to add this type of behavior.
>
> I don't have a huge problem with
>
> 	clk_set_parent(clk_get_parent(byte_clk), PLL)
>
> except that this fails the abstraction test. It leaks information
> about the clock tree into a driver that shouldn't need to know
> that on this particular SoC there's a clock in between the PLL
> and the byte_clk. Future designs may not have the intermediate
> clock and then we'll need to update the driver to handle the
> difference, when we could have added the flag and things would
> work the same.


I will have to check if we really require dynamic PLL configuration
or not. At the moment, the driver reads another DT param (that
identifies if we are in dual dsi mode) and then sets the appropriate
PLL as parent. So, in a sense, it is relying on DT already for setting
the parent.

I guess we can do the following:

- use assigned-clock-parents in DT to set the default PLL
parent (provided it works out of the box)

- Within the driver, still do the
'clk_set_parent(clk_get_parent(byte_clk), PLL)' thing and
remove it later if dynamic switching isn't needed at all
if the parent PLL is known beforehand in all use cases.

Archit

>

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
Forum, hosted by The Linux Foundation
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v3 11/12] dt-bindings: msm/dsi: Fix the order in which clocks are listed

[Rob Herring]

On Tue, Dec 01, 2015 at 03:30:09PM +0530, Archit Taneja wrote:
> List the clocks in the order that's used in DT. We don't have mdp/dsi
> DT nodes for any SoC in upstream yet, but we align with the order
> we intend to use.
> 
> Cc: devicetree@vger.kernel.org
> Cc: Rob Herring <robh@kernel.org>
> 
> Signed-off-by: Archit Taneja <architt@codeaurora.org>

Acked-by: Rob Herring <robh@kernel.org>

> ---
>  Documentation/devicetree/bindings/display/msm/dsi.txt | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
> index f344b9e..e097955 100644
> --- a/Documentation/devicetree/bindings/display/msm/dsi.txt
> +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
> @@ -14,13 +14,13 @@ Required properties:
>  - clocks: device clocks
>    See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
>  - clock-names: the following clocks are required:
> +  * "mdp_core_clk"
> +  * "iface_clk"
>    * "bus_clk"
> -  * "byte_clk"
> -  * "core_clk"
>    * "core_mmss_clk"
> -  * "iface_clk"
> -  * "mdp_core_clk"
> +  * "byte_clk"
>    * "pixel_clk"
> +  * "core_clk"
>  - vdd-supply: phandle to vdd regulator device node
>  - vddio-supply: phandle to vdd-io regulator device node
>  - vdda-supply: phandle to vdda regulator device node
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> hosted by The Linux Foundation
> 

Re: [PATCH v3 12/12] dt-bindings: msm/dsi: Add DSIv2 documentation

[Rob Herring]

On Tue, Dec 01, 2015 at 03:30:10PM +0530, Archit Taneja wrote:
> Add additional property info needed for DSIv2 DT.
> 
> Cc: devicetree@vger.kernel.org
> Cc: Rob Herring <robh@kernel.org>
> 
> Signed-off-by: Archit Taneja <architt@codeaurora.org>

Acked-by: Rob Herring <robh@kernel.org>

> ---
>  Documentation/devicetree/bindings/display/msm/dsi.txt | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
> index e097955..e7423be 100644
> --- a/Documentation/devicetree/bindings/display/msm/dsi.txt
> +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
> @@ -21,10 +21,13 @@ Required properties:
>    * "byte_clk"
>    * "pixel_clk"
>    * "core_clk"
> +  For DSIv2, we need an additional clock:
> +   * "src_clk"
>  - vdd-supply: phandle to vdd regulator device node
>  - vddio-supply: phandle to vdd-io regulator device node
>  - vdda-supply: phandle to vdda regulator device node
>  - qcom,dsi-phy: phandle to DSI PHY device node
> +- syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2)
>  
>  Optional properties:
>  - panel@0: Node of panel connected to this DSI controller.
> @@ -51,6 +54,7 @@ Required properties:
>    * "qcom,dsi-phy-28nm-hpm"
>    * "qcom,dsi-phy-28nm-lp"
>    * "qcom,dsi-phy-20nm"
> +  * "qcom,dsi-phy-28nm-8960"
>  - reg: Physical base address and length of the registers of PLL, PHY and PHY
>    regulator
>  - reg-names: The names of register regions. The following regions are required:
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> hosted by The Linux Foundation
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 10/10] dt-bindings: Add DSIv2 documentation

[Archit Taneja]

On 12/02/2015 02:04 PM, Stephen Boyd wrote:
> On 12/02, Stephen Boyd wrote:
>>
>> My only thought there would be to make of_clk_set_defaults() wait
>> until both clocks are registered before it does any parent
>> setting. But only in the case where the assigned parents contains
>> a clock that is provided by the node being processed. I suppose
>> the simplest thing to do would be to skip it during the device
>> driver probe and handle it when the clk provider is registered.
>>
>
> Actually it looks like we already have the code for that.
>
> 	if (clkspec.np == node && !clk_supplier)
> 		return 0;
>
> So assigned parents should "just work"?

I tried using assigned-parents and it works fine.

The issue you mentioned above doesn't apply in our case, because
we have two different devices for "dsi" and "dsi_phy". dsi_phy is the
clock provider here and dsi is the one that wants to assign clocks.

If there was only one dsi device representing both DSI and PHY, then
we'd hit the condition you mentioned.

Thanks,
Archit

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
Forum, hosted by The Linux Foundation
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel