All of lore.kernel.org
 help / color / mirror / Atom feed
From: Simon Horman <horms+renesas@verge.net.au>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v11 3/8] arm64: renesas: r8a7795 dtsi: Add dummy dma-controller nodes
Date: Thu, 15 Oct 2015 06:23:58 +0000	[thread overview]
Message-ID: <1444890243-6978-4-git-send-email-horms+renesas@verge.net.au> (raw)
In-Reply-To: <1444890243-6978-1-git-send-email-horms+renesas@verge.net.au>

From: Geert Uytterhoeven <geert+renesas@glider.be>

Add dummy nodes for the 3 DMA controllers.
This allows to start describing DMA channels for DMA slaves now.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
Changes since v10:
- None

Changes from V9: (Magnus Damm <damm+renesas@opensource.se>)
- Updated to remove fuzz

Changes from V8: (Magnus Damm <damm+renesas@opensource.se>)
- Updated to remove fuzz

Changes from V7: (Magnus Damm <damm+renesas@opensource.se>)
- Changed order not to depend on SCIF patch(es)

Based on:
 [PATCH 2/6] arm64: renesas: r8a7795 dtsi: Add dummy dma-controller nodes
---
 arch/arm64/boot/dts/renesas/r8a7795.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 77f93a77aa79..3d97a089e8be 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -254,5 +254,17 @@
 				#power-domain-cells = <0>;
 			};
 		};
+
+		dmac0: dma-controller@e6700000 {
+			/* Empty node for now */
+		};
+
+		dmac1: dma-controller@e7300000 {
+			/* Empty node for now */
+		};
+
+		dmac2: dma-controller@e7310000 {
+			/* Empty node for now */
+		};
 	};
 };
-- 
2.1.4


WARNING: multiple messages have this Message-ID (diff)
From: horms+renesas@verge.net.au (Simon Horman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v11 3/8] arm64: renesas: r8a7795 dtsi: Add dummy dma-controller nodes
Date: Thu, 15 Oct 2015 15:23:58 +0900	[thread overview]
Message-ID: <1444890243-6978-4-git-send-email-horms+renesas@verge.net.au> (raw)
In-Reply-To: <1444890243-6978-1-git-send-email-horms+renesas@verge.net.au>

From: Geert Uytterhoeven <geert+renesas@glider.be>

Add dummy nodes for the 3 DMA controllers.
This allows to start describing DMA channels for DMA slaves now.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
Changes since v10:
- None

Changes from V9: (Magnus Damm <damm+renesas@opensource.se>)
- Updated to remove fuzz

Changes from V8: (Magnus Damm <damm+renesas@opensource.se>)
- Updated to remove fuzz

Changes from V7: (Magnus Damm <damm+renesas@opensource.se>)
- Changed order not to depend on SCIF patch(es)

Based on:
 [PATCH 2/6] arm64: renesas: r8a7795 dtsi: Add dummy dma-controller nodes
---
 arch/arm64/boot/dts/renesas/r8a7795.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 77f93a77aa79..3d97a089e8be 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -254,5 +254,17 @@
 				#power-domain-cells = <0>;
 			};
 		};
+
+		dmac0: dma-controller at e6700000 {
+			/* Empty node for now */
+		};
+
+		dmac1: dma-controller at e7300000 {
+			/* Empty node for now */
+		};
+
+		dmac2: dma-controller at e7310000 {
+			/* Empty node for now */
+		};
 	};
 };
-- 
2.1.4

  parent reply	other threads:[~2015-10-15  6:23 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-15  6:23 [PATCH v11 0/8] arm64: renesas: Add Renesas R8A7795 SoC support Simon Horman
2015-10-15  6:23 ` Simon Horman
2015-10-15  6:23 ` [PATCH v11 1/8] arm64: renesas: r8a7795: " Simon Horman
2015-10-15  6:23   ` Simon Horman
2015-10-15 10:58   ` Mark Rutland
2015-10-15 10:58     ` Mark Rutland
2015-10-21 13:34     ` Geert Uytterhoeven
2015-10-21 13:34       ` Geert Uytterhoeven
2015-11-03 14:28       ` Mark Rutland
2015-11-03 14:28         ` Mark Rutland
2015-11-03 14:43         ` Geert Uytterhoeven
2015-11-03 14:43           ` Geert Uytterhoeven
2015-12-09  8:23         ` Geert Uytterhoeven
2015-12-09  8:23           ` Geert Uytterhoeven
2015-10-15  6:23 ` [PATCH v11 2/8] arm64: renesas: r8a7795 dtsi: Add all common divider clocks Simon Horman
2015-10-15  6:23   ` Simon Horman
2015-10-15  6:23 ` Simon Horman [this message]
2015-10-15  6:23   ` [PATCH v11 3/8] arm64: renesas: r8a7795 dtsi: Add dummy dma-controller nodes Simon Horman
2015-10-15  6:23 ` [PATCH v11 4/8] arm64: renesas: r8a7795 dtsi: Add all SCIF nodes Simon Horman
2015-10-15  6:23   ` Simon Horman
2015-10-15  6:24 ` [PATCH v11 5/8] arm64: renesas: r8a7795: enable PFC Simon Horman
2015-10-15  6:24   ` Simon Horman
2015-10-15  6:24 ` [PATCH v11 6/8] arm64: renesas: add Salvator-X board support on DTS Simon Horman
2015-10-15  6:24   ` Simon Horman
2015-10-15 11:01   ` Mark Rutland
2015-10-15 11:01     ` Mark Rutland
2015-10-23  7:00     ` Simon Horman
2015-10-23  7:00       ` Simon Horman
2015-10-29  7:52       ` Geert Uytterhoeven
2015-10-29  7:52         ` Geert Uytterhoeven
2015-10-30  7:51         ` Simon Horman
2015-10-30  7:51           ` Simon Horman
2015-11-03 14:24         ` Geert Uytterhoeven
2015-11-03 14:24           ` Geert Uytterhoeven
2015-11-09  2:19           ` Simon Horman
2015-11-09  2:19             ` Simon Horman
2015-11-16  9:53           ` Geert Uytterhoeven
2015-11-16  9:53             ` Geert Uytterhoeven
2015-11-17 17:31             ` Simon Horman
2015-11-17 17:31               ` Simon Horman
2015-10-15  6:24 ` [PATCH v11 7/8] arm64: defconfig: renesas: Enable Renesas r8a7795 SoC Simon Horman
2015-10-15  6:24   ` Simon Horman
2015-10-15  6:24 ` [PATCH v11 8/8] MAINTAINERS: Add entry Renesas arm64 architecture Simon Horman
2015-10-15  6:24   ` Simon Horman
2015-10-15  6:45   ` Khiem Nguyen
2015-10-15  6:45     ` Khiem Nguyen
2015-10-15  8:04     ` Russell King - ARM Linux
2015-10-15  8:04       ` Russell King - ARM Linux
2015-10-15  8:10       ` Khiem Nguyen
2015-10-15  8:10         ` Khiem Nguyen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1444890243-6978-4-git-send-email-horms+renesas@verge.net.au \
    --to=horms+renesas@verge.net.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.