From: Chen-Yu Tsai <wens@csie.org>
To: Hans de Goede <hdegoede@redhat.com>,
Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
Tomi Valkeinen <tomi.valkeinen@ti.com>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>,
linux-fbdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Mark Brown <broonie@kernel.org>
Subject: [PATCH v4 3/4] ARM: dts: sun6i: Add simplefb node labels to reference at board level
Date: Fri, 23 Oct 2015 11:50:40 +0800 [thread overview]
Message-ID: <1445572241-13259-4-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1445572241-13259-1-git-send-email-wens@csie.org>
Some boards, such as tablets, have regulators providing power to parts
of the display pipeline, like signal converters and LCD panels.
Add labels to the simplefb device nodes so that we can reference them
in the board dts files to add regulator supply properties.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun6i-a31.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 83c18798cae0..b6ad7850fac6 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -61,7 +61,7 @@
#size-cells = <1>;
ranges;
- framebuffer@0 {
+ simplefb_hdmi: framebuffer@0 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
@@ -69,7 +69,7 @@
status = "disabled";
};
- framebuffer@1 {
+ simplefb_lcd: framebuffer@1 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
--
2.6.1
WARNING: multiple messages have this Message-ID (diff)
From: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
To: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
Jean-Christophe Plagniol-Villard
<plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>,
Tomi Valkeinen <tomi.valkeinen-l0cyMroinI0@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Subject: [PATCH v4 3/4] ARM: dts: sun6i: Add simplefb node labels to reference at board level
Date: Fri, 23 Oct 2015 11:50:40 +0800 [thread overview]
Message-ID: <1445572241-13259-4-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1445572241-13259-1-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>
Some boards, such as tablets, have regulators providing power to parts
of the display pipeline, like signal converters and LCD panels.
Add labels to the simplefb device nodes so that we can reference them
in the board dts files to add regulator supply properties.
Signed-off-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
---
arch/arm/boot/dts/sun6i-a31.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 83c18798cae0..b6ad7850fac6 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -61,7 +61,7 @@
#size-cells = <1>;
ranges;
- framebuffer@0 {
+ simplefb_hdmi: framebuffer@0 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
@@ -69,7 +69,7 @@
status = "disabled";
};
- framebuffer@1 {
+ simplefb_lcd: framebuffer@1 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
--
2.6.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Chen-Yu Tsai <wens@csie.org>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 3/4] ARM: dts: sun6i: Add simplefb node labels to reference at board level
Date: Fri, 23 Oct 2015 03:50:40 +0000 [thread overview]
Message-ID: <1445572241-13259-4-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1445572241-13259-1-git-send-email-wens@csie.org>
Some boards, such as tablets, have regulators providing power to parts
of the display pipeline, like signal converters and LCD panels.
Add labels to the simplefb device nodes so that we can reference them
in the board dts files to add regulator supply properties.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun6i-a31.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 83c18798cae0..b6ad7850fac6 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -61,7 +61,7 @@
#size-cells = <1>;
ranges;
- framebuffer@0 {
+ simplefb_hdmi: framebuffer@0 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
@@ -69,7 +69,7 @@
status = "disabled";
};
- framebuffer@1 {
+ simplefb_lcd: framebuffer@1 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
--
2.6.1
WARNING: multiple messages have this Message-ID (diff)
From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 3/4] ARM: dts: sun6i: Add simplefb node labels to reference at board level
Date: Fri, 23 Oct 2015 11:50:40 +0800 [thread overview]
Message-ID: <1445572241-13259-4-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1445572241-13259-1-git-send-email-wens@csie.org>
Some boards, such as tablets, have regulators providing power to parts
of the display pipeline, like signal converters and LCD panels.
Add labels to the simplefb device nodes so that we can reference them
in the board dts files to add regulator supply properties.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun6i-a31.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 83c18798cae0..b6ad7850fac6 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -61,7 +61,7 @@
#size-cells = <1>;
ranges;
- framebuffer at 0 {
+ simplefb_hdmi: framebuffer at 0 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
@@ -69,7 +69,7 @@
status = "disabled";
};
- framebuffer at 1 {
+ simplefb_lcd: framebuffer at 1 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
--
2.6.1
next prev parent reply other threads:[~2015-10-23 3:51 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-23 3:50 [PATCH v4 0/4] simplefb: Add regulator handling support Chen-Yu Tsai
2015-10-23 3:50 ` Chen-Yu Tsai
2015-10-23 3:50 ` Chen-Yu Tsai
2015-10-23 3:50 ` [PATCH v4 1/4] dt-bindings: simplefb: Support regulator supply properties Chen-Yu Tsai
2015-10-23 3:50 ` Chen-Yu Tsai
2015-10-23 3:50 ` Chen-Yu Tsai
2015-10-23 3:50 ` [PATCH v4 2/4] simplefb: Claim and enable regulators Chen-Yu Tsai
2015-10-23 3:50 ` Chen-Yu Tsai
2015-10-23 3:50 ` Chen-Yu Tsai
2015-10-23 3:50 ` Chen-Yu Tsai [this message]
2015-10-23 3:50 ` [PATCH v4 3/4] ARM: dts: sun6i: Add simplefb node labels to reference at board level Chen-Yu Tsai
2015-10-23 3:50 ` Chen-Yu Tsai
2015-10-23 3:50 ` Chen-Yu Tsai
2015-10-23 3:50 ` [PATCH v4 4/4] ARM: dts: sun6i: Add dts file for MSI Primo81 tablet Chen-Yu Tsai
2015-10-23 3:50 ` Chen-Yu Tsai
2015-10-23 3:50 ` Chen-Yu Tsai
2015-10-23 14:53 ` Karsten Merker
2015-10-23 15:46 ` Chen-Yu Tsai
2015-10-23 15:46 ` Chen-Yu Tsai
2015-10-23 15:46 ` Chen-Yu Tsai
2015-10-23 15:56 ` Chen-Yu Tsai
2015-10-23 15:56 ` Chen-Yu Tsai
2015-10-23 15:56 ` Chen-Yu Tsai
2015-10-23 15:56 ` Chen-Yu Tsai
2015-10-23 16:56 ` Karsten Merker
2015-10-24 3:15 ` Chen-Yu Tsai
2015-10-24 3:15 ` Chen-Yu Tsai
2015-10-24 3:15 ` Chen-Yu Tsai
2015-10-24 20:57 ` Karsten Merker
2015-10-24 20:57 ` Karsten Merker
2015-10-24 21:07 ` [PATCH] ARM: dts: sunxi: sun6i-a31s-primo81.dts: add touchscreen axis swapping property Karsten Merker
2015-10-24 21:07 ` Karsten Merker
2015-10-24 21:07 ` Karsten Merker
2015-10-24 21:07 ` Karsten Merker
2015-10-28 6:20 ` Maxime Ripard
2015-10-28 6:20 ` Maxime Ripard
2015-10-28 6:20 ` Maxime Ripard
2015-10-24 7:09 ` [PATCH v4 4/4] ARM: dts: sun6i: Add dts file for MSI Primo81 tablet Maxime Ripard
2015-10-24 7:09 ` Maxime Ripard
2015-10-24 7:09 ` Maxime Ripard
2015-10-24 9:33 ` Siarhei Siamashka
2015-10-24 9:33 ` Siarhei Siamashka
2015-10-24 9:33 ` Siarhei Siamashka
2015-10-23 6:05 ` [PATCH v4 0/4] simplefb: Add regulator handling support Maxime Ripard
2015-10-23 6:05 ` Maxime Ripard
2015-10-23 6:05 ` Maxime Ripard
2015-10-23 6:05 ` Maxime Ripard
2015-10-23 13:49 ` Hans de Goede
2015-10-23 13:49 ` Hans de Goede
2015-10-23 13:49 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445572241-13259-4-git-send-email-wens@csie.org \
--to=wens@csie.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=hdegoede@redhat.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=pawel.moll@arm.com \
--cc=plagnioj@jcrosoft.com \
--cc=robh+dt@kernel.org \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.