[PATCH v2 0/4] ath10k: remove shadow copy engine descriptors

[PATCH v2 0/4] ath10k: remove shadow copy engine descriptors

[Rajkumar Manoharan]

Below series remove shadow copy of CE descriptors for source ring.
Removing the shadow copy should reduce d-cache pressure and memory
usage of the driver.

v2:
 * Since ce_send is not using shadow, fix send completion as well.

Rajkumar Manoharan (4):
  ath10k: use local memory instead of shadow descriptor in ce_send
  ath10k: remove send completion validation in diag read/write
  ath10k: cleanup copy engine send completion
  ath10k: remove shadow copy of CE descriptors for source ring

 drivers/net/wireless/ath/ath10k/ce.c  | 57 +++++------------------------------
 drivers/net/wireless/ath/ath10k/ce.h  | 16 ++--------
 drivers/net/wireless/ath/ath10k/pci.c | 53 +++++---------------------------
 3 files changed, 17 insertions(+), 109 deletions(-)

-- 
2.6.1

[PATCH v2 0/4] ath10k: remove shadow copy engine descriptors

[Rajkumar Manoharan]

Below series remove shadow copy of CE descriptors for source ring.
Removing the shadow copy should reduce d-cache pressure and memory
usage of the driver.

v2:
 * Since ce_send is not using shadow, fix send completion as well.

Rajkumar Manoharan (4):
  ath10k: use local memory instead of shadow descriptor in ce_send
  ath10k: remove send completion validation in diag read/write
  ath10k: cleanup copy engine send completion
  ath10k: remove shadow copy of CE descriptors for source ring

 drivers/net/wireless/ath/ath10k/ce.c  | 57 +++++------------------------------
 drivers/net/wireless/ath/ath10k/ce.h  | 16 ++--------
 drivers/net/wireless/ath/ath10k/pci.c | 53 +++++---------------------------
 3 files changed, 17 insertions(+), 109 deletions(-)

-- 
2.6.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH v2 1/4] ath10k: use local memory instead of shadow descriptor in ce_send

[Rajkumar Manoharan]

Currently to avoid uncached memory access while filling up copy engine
descriptors, shadow descriptors are used. This can be optimized further
by removing shadow descriptors. To achieve that first shadow ring
dependency in ce_send is removed by creating local copy of the
descriptor on stack and make a one-shot copy into the "uncached"
descriptor.

Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
v2:
 * Since ce_send is not using shadow, fix send completion as well.

 drivers/net/wireless/ath/ath10k/ce.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c
index 84220c3..f63376b 100644
--- a/drivers/net/wireless/ath/ath10k/ce.c
+++ b/drivers/net/wireless/ath/ath10k/ce.c
@@ -274,7 +274,7 @@ int ath10k_ce_send_nolock(struct ath10k_ce_pipe *ce_state,
 {
 	struct ath10k *ar = ce_state->ar;
 	struct ath10k_ce_ring *src_ring = ce_state->src_ring;
-	struct ce_desc *desc, *sdesc;
+	struct ce_desc *desc, sdesc;
 	unsigned int nentries_mask = src_ring->nentries_mask;
 	unsigned int sw_index = src_ring->sw_index;
 	unsigned int write_index = src_ring->write_index;
@@ -294,7 +294,6 @@ int ath10k_ce_send_nolock(struct ath10k_ce_pipe *ce_state,
 
 	desc = CE_SRC_RING_TO_DESC(src_ring->base_addr_owner_space,
 				   write_index);
-	sdesc = CE_SRC_RING_TO_DESC(src_ring->shadow_base, write_index);
 
 	desc_flags |= SM(transfer_id, CE_DESC_FLAGS_META_DATA);
 
@@ -303,11 +302,11 @@ int ath10k_ce_send_nolock(struct ath10k_ce_pipe *ce_state,
 	if (flags & CE_SEND_FLAG_BYTE_SWAP)
 		desc_flags |= CE_DESC_FLAGS_BYTE_SWAP;
 
-	sdesc->addr   = __cpu_to_le32(buffer);
-	sdesc->nbytes = __cpu_to_le16(nbytes);
-	sdesc->flags  = __cpu_to_le16(desc_flags);
+	sdesc.addr   = __cpu_to_le32(buffer);
+	sdesc.nbytes = __cpu_to_le16(nbytes);
+	sdesc.flags  = __cpu_to_le16(desc_flags);
 
-	*desc = *sdesc;
+	*desc = sdesc;
 
 	src_ring->per_transfer_context[write_index] = per_transfer_context;
 
@@ -614,7 +613,7 @@ int ath10k_ce_completed_send_next_nolock(struct ath10k_ce_pipe *ce_state,
 	if (read_index == sw_index)
 		return -EIO;
 
-	sbase = src_ring->shadow_base;
+	sbase = src_ring->base_addr_owner_space;
 	sdesc = CE_SRC_RING_TO_DESC(sbase, sw_index);
 
 	/* Return data from completed source descriptor */
-- 
2.6.1

[PATCH v2 1/4] ath10k: use local memory instead of shadow descriptor in ce_send

[Rajkumar Manoharan]

Currently to avoid uncached memory access while filling up copy engine
descriptors, shadow descriptors are used. This can be optimized further
by removing shadow descriptors. To achieve that first shadow ring
dependency in ce_send is removed by creating local copy of the
descriptor on stack and make a one-shot copy into the "uncached"
descriptor.

Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
v2:
 * Since ce_send is not using shadow, fix send completion as well.

 drivers/net/wireless/ath/ath10k/ce.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c
index 84220c3..f63376b 100644
--- a/drivers/net/wireless/ath/ath10k/ce.c
+++ b/drivers/net/wireless/ath/ath10k/ce.c
@@ -274,7 +274,7 @@ int ath10k_ce_send_nolock(struct ath10k_ce_pipe *ce_state,
 {
 	struct ath10k *ar = ce_state->ar;
 	struct ath10k_ce_ring *src_ring = ce_state->src_ring;
-	struct ce_desc *desc, *sdesc;
+	struct ce_desc *desc, sdesc;
 	unsigned int nentries_mask = src_ring->nentries_mask;
 	unsigned int sw_index = src_ring->sw_index;
 	unsigned int write_index = src_ring->write_index;
@@ -294,7 +294,6 @@ int ath10k_ce_send_nolock(struct ath10k_ce_pipe *ce_state,
 
 	desc = CE_SRC_RING_TO_DESC(src_ring->base_addr_owner_space,
 				   write_index);
-	sdesc = CE_SRC_RING_TO_DESC(src_ring->shadow_base, write_index);
 
 	desc_flags |= SM(transfer_id, CE_DESC_FLAGS_META_DATA);
 
@@ -303,11 +302,11 @@ int ath10k_ce_send_nolock(struct ath10k_ce_pipe *ce_state,
 	if (flags & CE_SEND_FLAG_BYTE_SWAP)
 		desc_flags |= CE_DESC_FLAGS_BYTE_SWAP;
 
-	sdesc->addr   = __cpu_to_le32(buffer);
-	sdesc->nbytes = __cpu_to_le16(nbytes);
-	sdesc->flags  = __cpu_to_le16(desc_flags);
+	sdesc.addr   = __cpu_to_le32(buffer);
+	sdesc.nbytes = __cpu_to_le16(nbytes);
+	sdesc.flags  = __cpu_to_le16(desc_flags);
 
-	*desc = *sdesc;
+	*desc = sdesc;
 
 	src_ring->per_transfer_context[write_index] = per_transfer_context;
 
@@ -614,7 +613,7 @@ int ath10k_ce_completed_send_next_nolock(struct ath10k_ce_pipe *ce_state,
 	if (read_index == sw_index)
 		return -EIO;
 
-	sbase = src_ring->shadow_base;
+	sbase = src_ring->base_addr_owner_space;
 	sdesc = CE_SRC_RING_TO_DESC(sbase, sw_index);
 
 	/* Return data from completed source descriptor */
-- 
2.6.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH v2 2/4] ath10k: remove send completion validation in diag read/write

[Rajkumar Manoharan]

CE diag window access is serialized (it has to be by design) so
there's no way to get a different send completion. so there's no
need for post completion validation.

Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 20 --------------------
 1 file changed, 20 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 5c05b0c..6f3c3e0 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -920,16 +920,6 @@ static int ath10k_pci_diag_read_mem(struct ath10k *ar, u32 address, void *data,
 			}
 		}
 
-		if (nbytes != completed_nbytes) {
-			ret = -EIO;
-			goto done;
-		}
-
-		if (buf != (u32)address) {
-			ret = -EIO;
-			goto done;
-		}
-
 		i = 0;
 		while (ath10k_ce_completed_recv_next_nolock(ce_diag, NULL, &buf,
 							    &completed_nbytes,
@@ -1094,16 +1084,6 @@ static int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
 			}
 		}
 
-		if (nbytes != completed_nbytes) {
-			ret = -EIO;
-			goto done;
-		}
-
-		if (buf != ce_data) {
-			ret = -EIO;
-			goto done;
-		}
-
 		i = 0;
 		while (ath10k_ce_completed_recv_next_nolock(ce_diag, NULL, &buf,
 							    &completed_nbytes,
-- 
2.6.1

[PATCH v2 2/4] ath10k: remove send completion validation in diag read/write

[Rajkumar Manoharan]

CE diag window access is serialized (it has to be by design) so
there's no way to get a different send completion. so there's no
need for post completion validation.

Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 20 --------------------
 1 file changed, 20 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 5c05b0c..6f3c3e0 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -920,16 +920,6 @@ static int ath10k_pci_diag_read_mem(struct ath10k *ar, u32 address, void *data,
 			}
 		}
 
-		if (nbytes != completed_nbytes) {
-			ret = -EIO;
-			goto done;
-		}
-
-		if (buf != (u32)address) {
-			ret = -EIO;
-			goto done;
-		}
-
 		i = 0;
 		while (ath10k_ce_completed_recv_next_nolock(ce_diag, NULL, &buf,
 							    &completed_nbytes,
@@ -1094,16 +1084,6 @@ static int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
 			}
 		}
 
-		if (nbytes != completed_nbytes) {
-			ret = -EIO;
-			goto done;
-		}
-
-		if (buf != ce_data) {
-			ret = -EIO;
-			goto done;
-		}
-
 		i = 0;
 		while (ath10k_ce_completed_recv_next_nolock(ce_diag, NULL, &buf,
 							    &completed_nbytes,
-- 
2.6.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH v2 3/4] ath10k: cleanup copy engine send completion

[Rajkumar Manoharan]

The physical address necessary to unmap DMA ('bufferp') is stored
in ath10k_skb_cb as 'paddr'. ath10k doesn't rely on the meta/transfer_id
when handling send completion (htc ep id is stored in sk_buff control
buffer). So the unused output arguments {bufferp, nbytesp and transfer_idp}
are removed from CE send completion. This change is needed before removing
the shadow copy of copy engine (CE) descriptors in follow up patch.

Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/ce.c  | 24 +++---------------------
 drivers/net/wireless/ath/ath10k/ce.h  | 10 ++--------
 drivers/net/wireless/ath/ath10k/pci.c | 28 +++++++---------------------
 3 files changed, 12 insertions(+), 50 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c
index f63376b..52021a9 100644
--- a/drivers/net/wireless/ath/ath10k/ce.c
+++ b/drivers/net/wireless/ath/ath10k/ce.c
@@ -578,17 +578,13 @@ int ath10k_ce_revoke_recv_next(struct ath10k_ce_pipe *ce_state,
  * The caller takes responsibility for any necessary locking.
  */
 int ath10k_ce_completed_send_next_nolock(struct ath10k_ce_pipe *ce_state,
-					 void **per_transfer_contextp,
-					 u32 *bufferp,
-					 unsigned int *nbytesp,
-					 unsigned int *transfer_idp)
+					 void **per_transfer_contextp)
 {
 	struct ath10k_ce_ring *src_ring = ce_state->src_ring;
 	u32 ctrl_addr = ce_state->ctrl_addr;
 	struct ath10k *ar = ce_state->ar;
 	unsigned int nentries_mask = src_ring->nentries_mask;
 	unsigned int sw_index = src_ring->sw_index;
-	struct ce_desc *sdesc, *sbase;
 	unsigned int read_index;
 
 	if (src_ring->hw_index == sw_index) {
@@ -613,15 +609,6 @@ int ath10k_ce_completed_send_next_nolock(struct ath10k_ce_pipe *ce_state,
 	if (read_index == sw_index)
 		return -EIO;
 
-	sbase = src_ring->base_addr_owner_space;
-	sdesc = CE_SRC_RING_TO_DESC(sbase, sw_index);
-
-	/* Return data from completed source descriptor */
-	*bufferp = __le32_to_cpu(sdesc->addr);
-	*nbytesp = __le16_to_cpu(sdesc->nbytes);
-	*transfer_idp = MS(__le16_to_cpu(sdesc->flags),
-			   CE_DESC_FLAGS_META_DATA);
-
 	if (per_transfer_contextp)
 		*per_transfer_contextp =
 			src_ring->per_transfer_context[sw_index];
@@ -696,10 +683,7 @@ int ath10k_ce_cancel_send_next(struct ath10k_ce_pipe *ce_state,
 }
 
 int ath10k_ce_completed_send_next(struct ath10k_ce_pipe *ce_state,
-				  void **per_transfer_contextp,
-				  u32 *bufferp,
-				  unsigned int *nbytesp,
-				  unsigned int *transfer_idp)
+				  void **per_transfer_contextp)
 {
 	struct ath10k *ar = ce_state->ar;
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
@@ -707,9 +691,7 @@ int ath10k_ce_completed_send_next(struct ath10k_ce_pipe *ce_state,
 
 	spin_lock_bh(&ar_pci->ce_lock);
 	ret = ath10k_ce_completed_send_next_nolock(ce_state,
-						   per_transfer_contextp,
-						   bufferp, nbytesp,
-						   transfer_idp);
+						   per_transfer_contextp);
 	spin_unlock_bh(&ar_pci->ce_lock);
 
 	return ret;
diff --git a/drivers/net/wireless/ath/ath10k/ce.h b/drivers/net/wireless/ath/ath10k/ce.h
index dbb94fd..67f90ec 100644
--- a/drivers/net/wireless/ath/ath10k/ce.h
+++ b/drivers/net/wireless/ath/ath10k/ce.h
@@ -192,16 +192,10 @@ int ath10k_ce_completed_recv_next(struct ath10k_ce_pipe *ce_state,
  * Pops 1 completed send buffer from Source ring.
  */
 int ath10k_ce_completed_send_next(struct ath10k_ce_pipe *ce_state,
-				  void **per_transfer_contextp,
-				  u32 *bufferp,
-				  unsigned int *nbytesp,
-				  unsigned int *transfer_idp);
+				  void **per_transfer_contextp);
 
 int ath10k_ce_completed_send_next_nolock(struct ath10k_ce_pipe *ce_state,
-					 void **per_transfer_contextp,
-					 u32 *bufferp,
-					 unsigned int *nbytesp,
-					 unsigned int *transfer_idp);
+					 void **per_transfer_contextp);
 
 /*==================CE Engine Initialization=======================*/
 
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 6f3c3e0..8100025 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -910,9 +910,8 @@ static int ath10k_pci_diag_read_mem(struct ath10k *ar, u32 address, void *data,
 			goto done;
 
 		i = 0;
-		while (ath10k_ce_completed_send_next_nolock(ce_diag, NULL, &buf,
-							    &completed_nbytes,
-							    &id) != 0) {
+		while (ath10k_ce_completed_send_next_nolock(ce_diag,
+							    NULL) != 0) {
 			mdelay(1);
 			if (i++ > DIAG_ACCESS_CE_TIMEOUT_MS) {
 				ret = -EBUSY;
@@ -1073,9 +1072,8 @@ static int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
 			goto done;
 
 		i = 0;
-		while (ath10k_ce_completed_send_next_nolock(ce_diag, NULL, &buf,
-							    &completed_nbytes,
-							    &id) != 0) {
+		while (ath10k_ce_completed_send_next_nolock(ce_diag,
+							    NULL) != 0) {
 			mdelay(1);
 
 			if (i++ > DIAG_ACCESS_CE_TIMEOUT_MS) {
@@ -1139,13 +1137,9 @@ static void ath10k_pci_htc_tx_cb(struct ath10k_ce_pipe *ce_state)
 	struct ath10k *ar = ce_state->ar;
 	struct sk_buff_head list;
 	struct sk_buff *skb;
-	u32 ce_data;
-	unsigned int nbytes;
-	unsigned int transfer_id;
 
 	__skb_queue_head_init(&list);
-	while (ath10k_ce_completed_send_next(ce_state, (void **)&skb, &ce_data,
-					     &nbytes, &transfer_id) == 0) {
+	while (ath10k_ce_completed_send_next(ce_state, (void **)&skb) == 0) {
 		/* no need to call tx completion for NULL pointers */
 		if (skb == NULL)
 			continue;
@@ -1215,12 +1209,8 @@ static void ath10k_pci_htt_tx_cb(struct ath10k_ce_pipe *ce_state)
 {
 	struct ath10k *ar = ce_state->ar;
 	struct sk_buff *skb;
-	u32 ce_data;
-	unsigned int nbytes;
-	unsigned int transfer_id;
 
-	while (ath10k_ce_completed_send_next(ce_state, (void **)&skb, &ce_data,
-					     &nbytes, &transfer_id) == 0) {
+	while (ath10k_ce_completed_send_next(ce_state, (void **)&skb) == 0) {
 		/* no need to call tx completion for NULL pointers */
 		if (!skb)
 			continue;
@@ -1796,12 +1786,8 @@ err_dma:
 static void ath10k_pci_bmi_send_done(struct ath10k_ce_pipe *ce_state)
 {
 	struct bmi_xfer *xfer;
-	u32 ce_data;
-	unsigned int nbytes;
-	unsigned int transfer_id;
 
-	if (ath10k_ce_completed_send_next(ce_state, (void **)&xfer, &ce_data,
-					  &nbytes, &transfer_id))
+	if (ath10k_ce_completed_send_next(ce_state, (void **)&xfer))
 		return;
 
 	xfer->tx_done = true;
-- 
2.6.1

[PATCH v2 3/4] ath10k: cleanup copy engine send completion

[Rajkumar Manoharan]

The physical address necessary to unmap DMA ('bufferp') is stored
in ath10k_skb_cb as 'paddr'. ath10k doesn't rely on the meta/transfer_id
when handling send completion (htc ep id is stored in sk_buff control
buffer). So the unused output arguments {bufferp, nbytesp and transfer_idp}
are removed from CE send completion. This change is needed before removing
the shadow copy of copy engine (CE) descriptors in follow up patch.

Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/ce.c  | 24 +++---------------------
 drivers/net/wireless/ath/ath10k/ce.h  | 10 ++--------
 drivers/net/wireless/ath/ath10k/pci.c | 28 +++++++---------------------
 3 files changed, 12 insertions(+), 50 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c
index f63376b..52021a9 100644
--- a/drivers/net/wireless/ath/ath10k/ce.c
+++ b/drivers/net/wireless/ath/ath10k/ce.c
@@ -578,17 +578,13 @@ int ath10k_ce_revoke_recv_next(struct ath10k_ce_pipe *ce_state,
  * The caller takes responsibility for any necessary locking.
  */
 int ath10k_ce_completed_send_next_nolock(struct ath10k_ce_pipe *ce_state,
-					 void **per_transfer_contextp,
-					 u32 *bufferp,
-					 unsigned int *nbytesp,
-					 unsigned int *transfer_idp)
+					 void **per_transfer_contextp)
 {
 	struct ath10k_ce_ring *src_ring = ce_state->src_ring;
 	u32 ctrl_addr = ce_state->ctrl_addr;
 	struct ath10k *ar = ce_state->ar;
 	unsigned int nentries_mask = src_ring->nentries_mask;
 	unsigned int sw_index = src_ring->sw_index;
-	struct ce_desc *sdesc, *sbase;
 	unsigned int read_index;
 
 	if (src_ring->hw_index == sw_index) {
@@ -613,15 +609,6 @@ int ath10k_ce_completed_send_next_nolock(struct ath10k_ce_pipe *ce_state,
 	if (read_index == sw_index)
 		return -EIO;
 
-	sbase = src_ring->base_addr_owner_space;
-	sdesc = CE_SRC_RING_TO_DESC(sbase, sw_index);
-
-	/* Return data from completed source descriptor */
-	*bufferp = __le32_to_cpu(sdesc->addr);
-	*nbytesp = __le16_to_cpu(sdesc->nbytes);
-	*transfer_idp = MS(__le16_to_cpu(sdesc->flags),
-			   CE_DESC_FLAGS_META_DATA);
-
 	if (per_transfer_contextp)
 		*per_transfer_contextp =
 			src_ring->per_transfer_context[sw_index];
@@ -696,10 +683,7 @@ int ath10k_ce_cancel_send_next(struct ath10k_ce_pipe *ce_state,
 }
 
 int ath10k_ce_completed_send_next(struct ath10k_ce_pipe *ce_state,
-				  void **per_transfer_contextp,
-				  u32 *bufferp,
-				  unsigned int *nbytesp,
-				  unsigned int *transfer_idp)
+				  void **per_transfer_contextp)
 {
 	struct ath10k *ar = ce_state->ar;
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
@@ -707,9 +691,7 @@ int ath10k_ce_completed_send_next(struct ath10k_ce_pipe *ce_state,
 
 	spin_lock_bh(&ar_pci->ce_lock);
 	ret = ath10k_ce_completed_send_next_nolock(ce_state,
-						   per_transfer_contextp,
-						   bufferp, nbytesp,
-						   transfer_idp);
+						   per_transfer_contextp);
 	spin_unlock_bh(&ar_pci->ce_lock);
 
 	return ret;
diff --git a/drivers/net/wireless/ath/ath10k/ce.h b/drivers/net/wireless/ath/ath10k/ce.h
index dbb94fd..67f90ec 100644
--- a/drivers/net/wireless/ath/ath10k/ce.h
+++ b/drivers/net/wireless/ath/ath10k/ce.h
@@ -192,16 +192,10 @@ int ath10k_ce_completed_recv_next(struct ath10k_ce_pipe *ce_state,
  * Pops 1 completed send buffer from Source ring.
  */
 int ath10k_ce_completed_send_next(struct ath10k_ce_pipe *ce_state,
-				  void **per_transfer_contextp,
-				  u32 *bufferp,
-				  unsigned int *nbytesp,
-				  unsigned int *transfer_idp);
+				  void **per_transfer_contextp);
 
 int ath10k_ce_completed_send_next_nolock(struct ath10k_ce_pipe *ce_state,
-					 void **per_transfer_contextp,
-					 u32 *bufferp,
-					 unsigned int *nbytesp,
-					 unsigned int *transfer_idp);
+					 void **per_transfer_contextp);
 
 /*==================CE Engine Initialization=======================*/
 
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 6f3c3e0..8100025 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -910,9 +910,8 @@ static int ath10k_pci_diag_read_mem(struct ath10k *ar, u32 address, void *data,
 			goto done;
 
 		i = 0;
-		while (ath10k_ce_completed_send_next_nolock(ce_diag, NULL, &buf,
-							    &completed_nbytes,
-							    &id) != 0) {
+		while (ath10k_ce_completed_send_next_nolock(ce_diag,
+							    NULL) != 0) {
 			mdelay(1);
 			if (i++ > DIAG_ACCESS_CE_TIMEOUT_MS) {
 				ret = -EBUSY;
@@ -1073,9 +1072,8 @@ static int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
 			goto done;
 
 		i = 0;
-		while (ath10k_ce_completed_send_next_nolock(ce_diag, NULL, &buf,
-							    &completed_nbytes,
-							    &id) != 0) {
+		while (ath10k_ce_completed_send_next_nolock(ce_diag,
+							    NULL) != 0) {
 			mdelay(1);
 
 			if (i++ > DIAG_ACCESS_CE_TIMEOUT_MS) {
@@ -1139,13 +1137,9 @@ static void ath10k_pci_htc_tx_cb(struct ath10k_ce_pipe *ce_state)
 	struct ath10k *ar = ce_state->ar;
 	struct sk_buff_head list;
 	struct sk_buff *skb;
-	u32 ce_data;
-	unsigned int nbytes;
-	unsigned int transfer_id;
 
 	__skb_queue_head_init(&list);
-	while (ath10k_ce_completed_send_next(ce_state, (void **)&skb, &ce_data,
-					     &nbytes, &transfer_id) == 0) {
+	while (ath10k_ce_completed_send_next(ce_state, (void **)&skb) == 0) {
 		/* no need to call tx completion for NULL pointers */
 		if (skb == NULL)
 			continue;
@@ -1215,12 +1209,8 @@ static void ath10k_pci_htt_tx_cb(struct ath10k_ce_pipe *ce_state)
 {
 	struct ath10k *ar = ce_state->ar;
 	struct sk_buff *skb;
-	u32 ce_data;
-	unsigned int nbytes;
-	unsigned int transfer_id;
 
-	while (ath10k_ce_completed_send_next(ce_state, (void **)&skb, &ce_data,
-					     &nbytes, &transfer_id) == 0) {
+	while (ath10k_ce_completed_send_next(ce_state, (void **)&skb) == 0) {
 		/* no need to call tx completion for NULL pointers */
 		if (!skb)
 			continue;
@@ -1796,12 +1786,8 @@ err_dma:
 static void ath10k_pci_bmi_send_done(struct ath10k_ce_pipe *ce_state)
 {
 	struct bmi_xfer *xfer;
-	u32 ce_data;
-	unsigned int nbytes;
-	unsigned int transfer_id;
 
-	if (ath10k_ce_completed_send_next(ce_state, (void **)&xfer, &ce_data,
-					  &nbytes, &transfer_id))
+	if (ath10k_ce_completed_send_next(ce_state, (void **)&xfer))
 		return;
 
 	xfer->tx_done = true;
-- 
2.6.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH v2 4/4] ath10k: remove shadow copy of CE descriptors for source ring

[Rajkumar Manoharan]

For the messages from host to target, shadow copy of CE descriptors
are maintained in source ring. Before writing actual CE descriptor,
first shadow copy is filled and then it is copied to CE address space.
To optimize in download path and to reduce d-cache pressure, removing
shadow copy of CE descriptors. This will also reduce driver memory
consumption by 33KB during on device probing.

Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/ce.c  | 22 ----------------------
 drivers/net/wireless/ath/ath10k/ce.h  |  6 ------
 drivers/net/wireless/ath/ath10k/pci.c |  5 -----
 3 files changed, 33 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c
index 52021a9..edf3629 100644
--- a/drivers/net/wireless/ath/ath10k/ce.c
+++ b/drivers/net/wireless/ath/ath10k/ce.c
@@ -921,27 +921,6 @@ ath10k_ce_alloc_src_ring(struct ath10k *ar, unsigned int ce_id,
 			src_ring->base_addr_ce_space_unaligned,
 			CE_DESC_RING_ALIGN);
 
-	/*
-	 * Also allocate a shadow src ring in regular
-	 * mem to use for faster access.
-	 */
-	src_ring->shadow_base_unaligned =
-		kmalloc((nentries * sizeof(struct ce_desc) +
-			 CE_DESC_RING_ALIGN), GFP_KERNEL);
-	if (!src_ring->shadow_base_unaligned) {
-		dma_free_coherent(ar->dev,
-				  (nentries * sizeof(struct ce_desc) +
-				   CE_DESC_RING_ALIGN),
-				  src_ring->base_addr_owner_space,
-				  src_ring->base_addr_ce_space);
-		kfree(src_ring);
-		return ERR_PTR(-ENOMEM);
-	}
-
-	src_ring->shadow_base = PTR_ALIGN(
-			src_ring->shadow_base_unaligned,
-			CE_DESC_RING_ALIGN);
-
 	return src_ring;
 }
 
@@ -1120,7 +1099,6 @@ void ath10k_ce_free_pipe(struct ath10k *ar, int ce_id)
 	struct ath10k_ce_pipe *ce_state = &ar_pci->ce_states[ce_id];
 
 	if (ce_state->src_ring) {
-		kfree(ce_state->src_ring->shadow_base_unaligned);
 		dma_free_coherent(ar->dev,
 				  (ce_state->src_ring->nentries *
 				   sizeof(struct ce_desc) +
diff --git a/drivers/net/wireless/ath/ath10k/ce.h b/drivers/net/wireless/ath/ath10k/ce.h
index 67f90ec..47b734c 100644
--- a/drivers/net/wireless/ath/ath10k/ce.h
+++ b/drivers/net/wireless/ath/ath10k/ce.h
@@ -100,12 +100,6 @@ struct ath10k_ce_ring {
 
 	/* CE address space */
 	u32 base_addr_ce_space;
-	/*
-	 * Start of shadow copy of descriptors, within regular memory.
-	 * Aligned to descriptor-size boundary.
-	 */
-	void *shadow_base_unaligned;
-	struct ce_desc *shadow_base;
 
 	/* keep last */
 	void *per_transfer_context[0];
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 8100025..4a65385 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -1594,7 +1594,6 @@ static void ath10k_pci_tx_pipe_cleanup(struct ath10k_pci_pipe *pci_pipe)
 	struct ath10k_pci *ar_pci;
 	struct ath10k_ce_pipe *ce_pipe;
 	struct ath10k_ce_ring *ce_ring;
-	struct ce_desc *ce_desc;
 	struct sk_buff *skb;
 	int i;
 
@@ -1609,10 +1608,6 @@ static void ath10k_pci_tx_pipe_cleanup(struct ath10k_pci_pipe *pci_pipe)
 	if (!pci_pipe->buf_sz)
 		return;
 
-	ce_desc = ce_ring->shadow_base;
-	if (WARN_ON(!ce_desc))
-		return;
-
 	for (i = 0; i < ce_ring->nentries; i++) {
 		skb = ce_ring->per_transfer_context[i];
 		if (!skb)
-- 
2.6.1

[PATCH v2 4/4] ath10k: remove shadow copy of CE descriptors for source ring

[Rajkumar Manoharan]

For the messages from host to target, shadow copy of CE descriptors
are maintained in source ring. Before writing actual CE descriptor,
first shadow copy is filled and then it is copied to CE address space.
To optimize in download path and to reduce d-cache pressure, removing
shadow copy of CE descriptors. This will also reduce driver memory
consumption by 33KB during on device probing.

Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/ce.c  | 22 ----------------------
 drivers/net/wireless/ath/ath10k/ce.h  |  6 ------
 drivers/net/wireless/ath/ath10k/pci.c |  5 -----
 3 files changed, 33 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c
index 52021a9..edf3629 100644
--- a/drivers/net/wireless/ath/ath10k/ce.c
+++ b/drivers/net/wireless/ath/ath10k/ce.c
@@ -921,27 +921,6 @@ ath10k_ce_alloc_src_ring(struct ath10k *ar, unsigned int ce_id,
 			src_ring->base_addr_ce_space_unaligned,
 			CE_DESC_RING_ALIGN);
 
-	/*
-	 * Also allocate a shadow src ring in regular
-	 * mem to use for faster access.
-	 */
-	src_ring->shadow_base_unaligned =
-		kmalloc((nentries * sizeof(struct ce_desc) +
-			 CE_DESC_RING_ALIGN), GFP_KERNEL);
-	if (!src_ring->shadow_base_unaligned) {
-		dma_free_coherent(ar->dev,
-				  (nentries * sizeof(struct ce_desc) +
-				   CE_DESC_RING_ALIGN),
-				  src_ring->base_addr_owner_space,
-				  src_ring->base_addr_ce_space);
-		kfree(src_ring);
-		return ERR_PTR(-ENOMEM);
-	}
-
-	src_ring->shadow_base = PTR_ALIGN(
-			src_ring->shadow_base_unaligned,
-			CE_DESC_RING_ALIGN);
-
 	return src_ring;
 }
 
@@ -1120,7 +1099,6 @@ void ath10k_ce_free_pipe(struct ath10k *ar, int ce_id)
 	struct ath10k_ce_pipe *ce_state = &ar_pci->ce_states[ce_id];
 
 	if (ce_state->src_ring) {
-		kfree(ce_state->src_ring->shadow_base_unaligned);
 		dma_free_coherent(ar->dev,
 				  (ce_state->src_ring->nentries *
 				   sizeof(struct ce_desc) +
diff --git a/drivers/net/wireless/ath/ath10k/ce.h b/drivers/net/wireless/ath/ath10k/ce.h
index 67f90ec..47b734c 100644
--- a/drivers/net/wireless/ath/ath10k/ce.h
+++ b/drivers/net/wireless/ath/ath10k/ce.h
@@ -100,12 +100,6 @@ struct ath10k_ce_ring {
 
 	/* CE address space */
 	u32 base_addr_ce_space;
-	/*
-	 * Start of shadow copy of descriptors, within regular memory.
-	 * Aligned to descriptor-size boundary.
-	 */
-	void *shadow_base_unaligned;
-	struct ce_desc *shadow_base;
 
 	/* keep last */
 	void *per_transfer_context[0];
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 8100025..4a65385 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -1594,7 +1594,6 @@ static void ath10k_pci_tx_pipe_cleanup(struct ath10k_pci_pipe *pci_pipe)
 	struct ath10k_pci *ar_pci;
 	struct ath10k_ce_pipe *ce_pipe;
 	struct ath10k_ce_ring *ce_ring;
-	struct ce_desc *ce_desc;
 	struct sk_buff *skb;
 	int i;
 
@@ -1609,10 +1608,6 @@ static void ath10k_pci_tx_pipe_cleanup(struct ath10k_pci_pipe *pci_pipe)
 	if (!pci_pipe->buf_sz)
 		return;
 
-	ce_desc = ce_ring->shadow_base;
-	if (WARN_ON(!ce_desc))
-		return;
-
 	for (i = 0; i < ce_ring->nentries; i++) {
 		skb = ce_ring->per_transfer_context[i];
 		if (!skb)
-- 
2.6.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: [PATCH v2 0/4] ath10k: remove shadow copy engine descriptors

[Kalle Valo]

Rajkumar Manoharan <rmanohar@qti.qualcomm.com> writes:

> Below series remove shadow copy of CE descriptors for source ring.
> Removing the shadow copy should reduce d-cache pressure and memory
> usage of the driver.
>
> v2:
>  * Since ce_send is not using shadow, fix send completion as well.
>
> Rajkumar Manoharan (4):
>   ath10k: use local memory instead of shadow descriptor in ce_send
>   ath10k: remove send completion validation in diag read/write
>   ath10k: cleanup copy engine send completion
>   ath10k: remove shadow copy of CE descriptors for source ring

All four applied, thanks.

-- 
Kalle Valo

Re: [PATCH v2 0/4] ath10k: remove shadow copy engine descriptors

[Kalle Valo]

Rajkumar Manoharan <rmanohar@qti.qualcomm.com> writes:

> Below series remove shadow copy of CE descriptors for source ring.
> Removing the shadow copy should reduce d-cache pressure and memory
> usage of the driver.
>
> v2:
>  * Since ce_send is not using shadow, fix send completion as well.
>
> Rajkumar Manoharan (4):
>   ath10k: use local memory instead of shadow descriptor in ce_send
>   ath10k: remove send completion validation in diag read/write
>   ath10k: cleanup copy engine send completion
>   ath10k: remove shadow copy of CE descriptors for source ring

All four applied, thanks.

-- 
Kalle Valo

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k