All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH] h8300: Initialize cleanup and remove module code
@ 2015-11-04  7:35 Yoshinori Sato
  2015-11-04 13:49 ` Daniel Lezcano
  2015-11-06  7:03 ` [PATCH v2] h8300: cleanup startup " Yoshinori Sato
  0 siblings, 2 replies; 6+ messages in thread
From: Yoshinori Sato @ 2015-11-04  7:35 UTC (permalink / raw)
  To: Daniel Lezcano, Thomas Gleixner; +Cc: Yoshinori Sato, linux-kernel

h8300's clocksource driver cleanup.
- Use CLOCKSOURCE_OF_DECLARE
- Remove module exit

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
 drivers/clocksource/h8300_timer16.c | 133 ++++++++++++-----------------
 drivers/clocksource/h8300_timer8.c  | 164 ++++++++++++++----------------------
 drivers/clocksource/h8300_tpu.c     | 105 ++++++++---------------
 3 files changed, 151 insertions(+), 251 deletions(-)

diff --git a/drivers/clocksource/h8300_timer16.c b/drivers/clocksource/h8300_timer16.c
index 82941c1..e2e10cf 100644
--- a/drivers/clocksource/h8300_timer16.c
+++ b/drivers/clocksource/h8300_timer16.c
@@ -17,6 +17,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #include <asm/segment.h>
 #include <asm/irq.h>
@@ -47,7 +49,6 @@
 #define ABSOLUTE 1
 
 struct timer16_priv {
-	struct platform_device *pdev;
 	struct clocksource cs;
 	struct irqaction irqaction;
 	unsigned long total_cycles;
@@ -147,43 +148,58 @@ static void timer16_disable(struct clocksource *cs)
 #define REG_CH   0
 #define REG_COMM 1
 
-static int timer16_setup(struct timer16_priv *p, struct platform_device *pdev)
+static void __init h8300_16timer_init(struct device_node *node)
 {
-	struct resource *res[2];
+	void __iomem *base[2];
 	int ret, irq;
 	unsigned int ch;
+	struct timer16_priv *p;
+	struct clk *clk;
+
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk)) {
+		pr_err("failed to get clock for clocksource\n");
+		return;
+	}
 
-	memset(p, 0, sizeof(*p));
-	p->pdev = pdev;
+	base[REG_CH] = of_iomap(node, 0);
+	if (!base[0]) {
+		pr_err("failed to map registers for clocksource\n");
+		goto free_clk;
+	}
 
-	res[REG_CH] = platform_get_resource(p->pdev,
-					    IORESOURCE_MEM, REG_CH);
-	res[REG_COMM] = platform_get_resource(p->pdev,
-					      IORESOURCE_MEM, REG_COMM);
-	if (!res[REG_CH] || !res[REG_COMM]) {
-		dev_err(&p->pdev->dev, "failed to get I/O memory\n");
-		return -ENXIO;
+	base[REG_COMM] = of_iomap(node, 1);
+	if (!base[1]) {
+		pr_err("failed to map registers for clocksource\n");
+		goto unmap_ch;
 	}
-	irq = platform_get_irq(p->pdev, 0);
+
+	irq = irq_of_parse_and_map(node, 0);
 	if (irq < 0) {
-		dev_err(&p->pdev->dev, "failed to get irq\n");
-		return irq;
+		pr_err("failed to get irq for clockevent\n");
+		goto unmap_comm;
 	}
 
-	p->clk = clk_get(&p->pdev->dev, "fck");
-	if (IS_ERR(p->clk)) {
-		dev_err(&p->pdev->dev, "can't get clk\n");
-		return PTR_ERR(p->clk);
+	p = kzalloc(sizeof(*p), GFP_KERNEL);
+	if (!p) {
+		pr_err("failed to allocate memory for clocksource\n");
+		goto unmap_comm;
 	}
-	of_property_read_u32(p->pdev->dev.of_node, "renesas,channel", &ch);
 
-	p->pdev = pdev;
-	p->mapbase = res[REG_CH]->start;
-	p->mapcommon = res[REG_COMM]->start;
+	of_property_read_u32(node, "renesas,channel", &ch);
+
+	p->mapbase = (unsigned long)base[REG_CH];
+	p->mapcommon = (unsigned long)base[REG_COMM];
 	p->enb = 1 << ch;
 	p->imfa = 1 << ch;
 	p->imiea = 1 << (4 + ch);
-	p->cs.name = pdev->name;
+
+	p->irqaction.name = node->name;
+	p->irqaction.handler = timer16_interrupt;
+	p->irqaction.dev_id = p;
+	p->irqaction.flags = IRQF_TIMER;
+
+	p->cs.name = node->name;
 	p->cs.rating = 200;
 	p->cs.read = timer16_clocksource_read;
 	p->cs.enable = timer16_enable;
@@ -191,64 +207,23 @@ static int timer16_setup(struct timer16_priv *p, struct platform_device *pdev)
 	p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
 	p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
 
-	ret = request_irq(irq, timer16_interrupt,
-			  IRQF_TIMER, pdev->name, p);
+	ret = setup_irq(irq, &p->irqaction);
 	if (ret < 0) {
-		dev_err(&p->pdev->dev, "failed to request irq %d\n", irq);
-		return ret;
+		pr_err("failed to request irq %d of clocksource\n", irq);
+		goto free_priv;
 	}
 
 	clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 8);
-
-	return 0;
-}
-
-static int timer16_probe(struct platform_device *pdev)
-{
-	struct timer16_priv *p = platform_get_drvdata(pdev);
-
-	if (p) {
-		dev_info(&pdev->dev, "kept as earlytimer\n");
-		return 0;
-	}
-
-	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
-	if (!p)
-		return -ENOMEM;
-
-	return timer16_setup(p, pdev);
-}
-
-static int timer16_remove(struct platform_device *pdev)
-{
-	return -EBUSY;
-}
-
-static const struct of_device_id timer16_of_table[] = {
-	{ .compatible = "renesas,16bit-timer" },
-	{ }
-};
-static struct platform_driver timer16_driver = {
-	.probe		= timer16_probe,
-	.remove		= timer16_remove,
-	.driver		= {
-		.name	= "h8300h-16timer",
-		.of_match_table = of_match_ptr(timer16_of_table),
-	}
-};
-
-static int __init timer16_init(void)
-{
-	return platform_driver_register(&timer16_driver);
-}
-
-static void __exit timer16_exit(void)
-{
-	platform_driver_unregister(&timer16_driver);
+	return;
+
+free_priv:
+	kfree(p);
+unmap_comm:
+	iounmap(base[REG_COMM]);
+unmap_ch:
+	iounmap(base[REG_CH]);
+free_clk:
+	clk_put(clk);
 }
 
-subsys_initcall(timer16_init);
-module_exit(timer16_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8/300H 16bit Timer Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_16bit, "renesas,16bit-timer", h8300_16timer_init);
diff --git a/drivers/clocksource/h8300_timer8.c b/drivers/clocksource/h8300_timer8.c
index e83db7b..0a2333b 100644
--- a/drivers/clocksource/h8300_timer8.c
+++ b/drivers/clocksource/h8300_timer8.c
@@ -12,13 +12,14 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
-#include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/clockchips.h>
 #include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #include <asm/irq.h>
 
@@ -39,8 +40,9 @@
 #define RELATIVE 0
 #define ABSOLUTE 1
 
+#define SCALE 64
+
 struct timer8_priv {
-	struct platform_device *pdev;
 	struct clock_event_device ced;
 	struct irqaction irqaction;
 	unsigned long mapbase;
@@ -76,8 +78,6 @@ static irqreturn_t timer8_interrupt(int irq, void *dev_id)
 {
 	struct timer8_priv *p = dev_id;
 
-	ctrl_outb(ctrl_inb(p->mapbase + _8TCSR) & ~0x40,
-		  p->mapbase + _8TCSR);
 	p->flags |= FLAG_IRQCONTEXT;
 	ctrl_outw(p->tcora, p->mapbase + TCORA);
 	if (!(p->flags & FLAG_SKIPEVENT)) {
@@ -85,6 +85,8 @@ static irqreturn_t timer8_interrupt(int irq, void *dev_id)
 			ctrl_outw(0x0000, p->mapbase + _8TCR);
 		p->ced.event_handler(&p->ced);
 	}
+	ctrl_outb(ctrl_inb(p->mapbase + _8TCSR) & ~0x40,
+		  p->mapbase + _8TCSR);
 	p->flags &= ~(FLAG_SKIPEVENT | FLAG_IRQCONTEXT);
 
 	return IRQ_HANDLED;
@@ -96,23 +98,25 @@ static void timer8_set_next(struct timer8_priv *p, unsigned long delta)
 	unsigned long now;
 
 	raw_spin_lock_irqsave(&p->lock, flags);
-	if (delta >= 0x10000)
-		dev_warn(&p->pdev->dev, "delta out of range\n");
 	now = timer8_get_counter(p);
 	p->tcora = delta;
-	ctrl_outb(ctrl_inb(p->mapbase + _8TCR) & ~0x40, p->mapbase + _8TCR);
-	if (delta > now)
-		ctrl_outw(delta, p->mapbase + TCORA);
-	else
-		ctrl_outw(now + 1, p->mapbase + TCORA);
-	ctrl_outb(ctrl_inb(p->mapbase + _8TCR) | 0x40, p->mapbase + _8TCR);
+	if (unlikely(p->flags & FLAG_IRQCONTEXT)) {
+		ctrl_outb(ctrl_inb(p->mapbase + _8TCR) & ~0x40,
+			  p->mapbase + _8TCR);
+		if (delta > now)
+			ctrl_outw(delta, p->mapbase + TCORA);
+		else
+			ctrl_outw(now + 1, p->mapbase + TCORA);
+		ctrl_outb(ctrl_inb(p->mapbase + _8TCR) | 0x40,
+			  p->mapbase + _8TCR);
+	}
 
 	raw_spin_unlock_irqrestore(&p->lock, flags);
 }
 
 static int timer8_enable(struct timer8_priv *p)
 {
-	p->rate = clk_get_rate(p->pclk) / 64;
+	p->rate = clk_get_rate(p->pclk) / SCALE;
 	ctrl_outw(0xffff, p->mapbase + TCORA);
 	ctrl_outw(0x0000, p->mapbase + _8TCNT);
 	ctrl_outw(0x0c02, p->mapbase + _8TCR);
@@ -159,14 +163,7 @@ static inline struct timer8_priv *ced_to_priv(struct clock_event_device *ced)
 
 static void timer8_clock_event_start(struct timer8_priv *p, int periodic)
 {
-	struct clock_event_device *ced = &p->ced;
-
 	timer8_start(p);
-
-	ced->shift = 32;
-	ced->mult = div_sc(p->rate, NSEC_PER_SEC, ced->shift);
-	ced->max_delta_ns = clockevent_delta2ns(0xffff, ced);
-	ced->min_delta_ns = clockevent_delta2ns(0x0001, ced);
 	timer8_set_next(p, periodic?(p->rate + HZ/2) / HZ:0x10000);
 }
 
@@ -180,7 +177,7 @@ static int timer8_clock_event_periodic(struct clock_event_device *ced)
 {
 	struct timer8_priv *p = ced_to_priv(ced);
 
-	dev_info(&p->pdev->dev, "used for periodic clock events\n");
+	pr_info("%s: used for periodic clock events\n", ced->name);
 	timer8_stop(p);
 	timer8_clock_event_start(p, PERIODIC);
 
@@ -191,7 +188,7 @@ static int timer8_clock_event_oneshot(struct clock_event_device *ced)
 {
 	struct timer8_priv *p = ced_to_priv(ced);
 
-	dev_info(&p->pdev->dev, "used for oneshot clock events\n");
+	pr_info("%s: used for oneshot clock events\n", ced->name);
 	timer8_stop(p);
 	timer8_clock_event_start(p, ONESHOT);
 
@@ -209,42 +206,48 @@ static int timer8_clock_event_next(unsigned long delta,
 	return 0;
 }
 
-static int timer8_setup(struct timer8_priv *p,
-			struct platform_device *pdev)
+static void __init h8300_8timer_init(struct device_node *node)
 {
-	struct resource *res;
+	void __iomem *base;
 	int irq;
-	int ret;
-
-	memset(p, 0, sizeof(*p));
-	p->pdev = pdev;
+	int ret = 0;
+	int rate;
+	struct timer8_priv *p;
+	struct clk *clk;
+
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk)) {
+		pr_err("failed to get clock for clockevent\n");
+		return;
+	}
 
-	res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&p->pdev->dev, "failed to get I/O memory\n");
-		return -ENXIO;
+	base = of_iomap(node, 0);
+	if (!base) {
+		pr_err("failed to map registers for clockevent\n");
+		goto free_clk;
 	}
 
-	irq = platform_get_irq(p->pdev, 0);
+	irq = irq_of_parse_and_map(node, 0);
 	if (irq < 0) {
-		dev_err(&p->pdev->dev, "failed to get irq\n");
-		return -ENXIO;
+		pr_err("failed to get irq for clockevent\n");
+		goto unmap_reg;
+	}
+
+	p = kzalloc(sizeof(*p), GFP_KERNEL);
+	if (!p) {
+		pr_err("failed to allocate memory for clockevent\n");
+		goto unmap_reg;
 	}
 
-	p->mapbase = res->start;
+	p->mapbase = (unsigned long)base;
+	p->pclk = clk;
 
-	p->irqaction.name = dev_name(&p->pdev->dev);
+	p->irqaction.name = node->name;
 	p->irqaction.handler = timer8_interrupt;
 	p->irqaction.dev_id = p;
 	p->irqaction.flags = IRQF_TIMER;
 
-	p->pclk = clk_get(&p->pdev->dev, "fck");
-	if (IS_ERR(p->pclk)) {
-		dev_err(&p->pdev->dev, "can't get clk\n");
-		return PTR_ERR(p->pclk);
-	}
-
-	p->ced.name = pdev->name;
+	p->ced.name = node->name;
 	p->ced.features = CLOCK_EVT_FEAT_PERIODIC |
 		CLOCK_EVT_FEAT_ONESHOT;
 	p->ced.rating = 200;
@@ -256,64 +259,19 @@ static int timer8_setup(struct timer8_priv *p,
 
 	ret = setup_irq(irq, &p->irqaction);
 	if (ret < 0) {
-		dev_err(&p->pdev->dev,
-			"failed to request irq %d\n", irq);
-		return ret;
-	}
-	clockevents_register_device(&p->ced);
-	platform_set_drvdata(pdev, p);
-
-	return 0;
-}
-
-static int timer8_probe(struct platform_device *pdev)
-{
-	struct timer8_priv *p = platform_get_drvdata(pdev);
-
-	if (p) {
-		dev_info(&pdev->dev, "kept as earlytimer\n");
-		return 0;
+		pr_err("failed to request irq %d for clockevent\n", irq);
+		goto free_priv;
 	}
-
-	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
-	if (!p)
-		return -ENOMEM;
-
-	return timer8_setup(p, pdev);
-}
-
-static int timer8_remove(struct platform_device *pdev)
-{
-	return -EBUSY;
-}
-
-static const struct of_device_id timer8_of_table[] __maybe_unused = {
-	{ .compatible = "renesas,8bit-timer" },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(of, timer8_of_table);
-static struct platform_driver timer8_driver = {
-	.probe		= timer8_probe,
-	.remove		= timer8_remove,
-	.driver		= {
-		.name	= "h8300-8timer",
-		.of_match_table = of_match_ptr(timer8_of_table),
-	}
-};
-
-static int __init timer8_init(void)
-{
-	return platform_driver_register(&timer8_driver);
-}
-
-static void __exit timer8_exit(void)
-{
-	platform_driver_unregister(&timer8_driver);
+	rate = clk_get_rate(clk) / SCALE;
+	clockevents_config_and_register(&p->ced, rate, 1, 0x0000ffff);
+	return;
+
+free_priv:
+	kfree(p);
+unmap_reg:
+	iounmap(base);
+free_clk:
+	clk_put(clk);
 }
 
-subsys_initcall(timer8_init);
-module_exit(timer8_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8/300 8bit Timer Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_8bit, "renesas,8bit-timer", h8300_8timer_init);
diff --git a/drivers/clocksource/h8300_tpu.c b/drivers/clocksource/h8300_tpu.c
index 64195fd..2dd4daf 100644
--- a/drivers/clocksource/h8300_tpu.c
+++ b/drivers/clocksource/h8300_tpu.c
@@ -1,5 +1,5 @@
 /*
- *  H8/300 TPU Driver
+ *  H8S TPU Driver
  *
  *  Copyright 2015 Yoshinori Sato <ysato@users.sourcefoge.jp>
  *
@@ -17,6 +17,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #include <asm/irq.h>
 
@@ -32,7 +34,6 @@
 #define TGRD	14
 
 struct tpu_priv {
-	struct platform_device *pdev;
 	struct clocksource cs;
 	struct clk *clk;
 	unsigned long mapbase1;
@@ -119,30 +120,39 @@ static void tpu_clocksource_disable(struct clocksource *cs)
 #define CH_L 0
 #define CH_H 1
 
-static int __init tpu_setup(struct tpu_priv *p, struct platform_device *pdev)
+static void __init h8300_tpu_init(struct device_node *node)
 {
-	struct resource *res[2];
+	void __iomem *base[2];
+	struct tpu_priv *p;
+	struct clk *clk;
 
-	memset(p, 0, sizeof(*p));
-	p->pdev = pdev;
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk)) {
+		pr_err("failed to get clock for clocksource\n");
+		return;
+	}
 
-	res[CH_L] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_L);
-	res[CH_H] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_H);
-	if (!res[CH_L] || !res[CH_H]) {
-		dev_err(&p->pdev->dev, "failed to get I/O memory\n");
-		return -ENXIO;
+	base[CH_L] = of_iomap(node, CH_L);
+	if (!base[CH_L]) {
+		pr_err("failed to map registers for clocksource\n");
+		goto free_clk;
+	}
+	base[CH_H] = of_iomap(node, CH_H);
+	if (!base[CH_H]) {
+		pr_err("failed to map registers for clocksource\n");
+		goto unmap_L;
 	}
 
-	p->clk = clk_get(&p->pdev->dev, "fck");
-	if (IS_ERR(p->clk)) {
-		dev_err(&p->pdev->dev, "can't get clk\n");
-		return PTR_ERR(p->clk);
+	p = kzalloc(sizeof(*p), GFP_KERNEL);
+	if (!p) {
+		pr_err("failed to allocate memory for clocksource\n");
+		goto unmap_H;
 	}
 
-	p->mapbase1 = res[CH_L]->start;
-	p->mapbase2 = res[CH_H]->start;
+	p->mapbase1 = (unsigned long)base[CH_L];
+	p->mapbase2 = (unsigned long)base[CH_H];
 
-	p->cs.name = pdev->name;
+	p->cs.name = node->name;
 	p->cs.rating = 200;
 	p->cs.read = tpu_clocksource_read;
 	p->cs.enable = tpu_clocksource_enable;
@@ -150,58 +160,15 @@ static int __init tpu_setup(struct tpu_priv *p, struct platform_device *pdev)
 	p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
 	p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
 	clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 64);
-	platform_set_drvdata(pdev, p);
-
-	return 0;
-}
-
-static int tpu_probe(struct platform_device *pdev)
-{
-	struct tpu_priv *p = platform_get_drvdata(pdev);
-
-	if (p) {
-		dev_info(&pdev->dev, "kept as earlytimer\n");
-		return 0;
-	}
-
-	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
-	if (!p)
-		return -ENOMEM;
-
-	return tpu_setup(p, pdev);
-}
-
-static int tpu_remove(struct platform_device *pdev)
-{
-	return -EBUSY;
-}
-
-static const struct of_device_id tpu_of_table[] = {
-	{ .compatible = "renesas,tpu" },
-	{ }
-};
 
-static struct platform_driver tpu_driver = {
-	.probe		= tpu_probe,
-	.remove		= tpu_remove,
-	.driver		= {
-		.name	= "h8s-tpu",
-		.of_match_table = of_match_ptr(tpu_of_table),
-	}
-};
-
-static int __init tpu_init(void)
-{
-	return platform_driver_register(&tpu_driver);
-}
+	return;
 
-static void __exit tpu_exit(void)
-{
-	platform_driver_unregister(&tpu_driver);
+unmap_H:
+	iounmap(base[CH_H]);
+unmap_L:
+	iounmap(base[CH_H]);
+free_clk:
+	clk_put(clk);
 }
 
-subsys_initcall(tpu_init);
-module_exit(tpu_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8S Timer Pulse Unit Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_tpu, "renesas,tpu", h8300_tpu_init);
-- 
2.6.1


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* Re: [PATCH] h8300: Initialize cleanup and remove module code
  2015-11-04  7:35 [PATCH] h8300: Initialize cleanup and remove module code Yoshinori Sato
@ 2015-11-04 13:49 ` Daniel Lezcano
  2015-11-06  7:03 ` [PATCH v2] h8300: cleanup startup " Yoshinori Sato
  1 sibling, 0 replies; 6+ messages in thread
From: Daniel Lezcano @ 2015-11-04 13:49 UTC (permalink / raw)
  To: Yoshinori Sato, Thomas Gleixner; +Cc: linux-kernel

On 11/04/2015 08:35 AM, Yoshinori Sato wrote:
> h8300's clocksource driver cleanup.
> - Use CLOCKSOURCE_OF_DECLARE
> - Remove module exit

Hi Yoshinori,

the patches does not apply on tip/timers/core.

Also it seems to contain changes not related to initialization cleanups 
and module code.

I have a few comment above regarding the initialization.

If you can separate the patches, it will be easier to review.

Thanks.

   -- Daniel

> Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
> ---
>   drivers/clocksource/h8300_timer16.c | 133 ++++++++++++-----------------
>   drivers/clocksource/h8300_timer8.c  | 164 ++++++++++++++----------------------
>   drivers/clocksource/h8300_tpu.c     | 105 ++++++++---------------
>   3 files changed, 151 insertions(+), 251 deletions(-)
>
> diff --git a/drivers/clocksource/h8300_timer16.c b/drivers/clocksource/h8300_timer16.c
> index 82941c1..e2e10cf 100644
> --- a/drivers/clocksource/h8300_timer16.c
> +++ b/drivers/clocksource/h8300_timer16.c
> @@ -17,6 +17,8 @@
>   #include <linux/clk.h>
>   #include <linux/io.h>
>   #include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
>
>   #include <asm/segment.h>
>   #include <asm/irq.h>
> @@ -47,7 +49,6 @@
>   #define ABSOLUTE 1
>
>   struct timer16_priv {
> -	struct platform_device *pdev;
>   	struct clocksource cs;
>   	struct irqaction irqaction;
>   	unsigned long total_cycles;
> @@ -147,43 +148,58 @@ static void timer16_disable(struct clocksource *cs)
>   #define REG_CH   0
>   #define REG_COMM 1
>
> -static int timer16_setup(struct timer16_priv *p, struct platform_device *pdev)
> +static void __init h8300_16timer_init(struct device_node *node)
>   {
> -	struct resource *res[2];
> +	void __iomem *base[2];
>   	int ret, irq;
>   	unsigned int ch;
> +	struct timer16_priv *p;
> +	struct clk *clk;
> +
> +	clk = of_clk_get(node, 0);
> +	if (IS_ERR(clk)) {
> +		pr_err("failed to get clock for clocksource\n");
> +		return;
> +	}
>
> -	memset(p, 0, sizeof(*p));
> -	p->pdev = pdev;
> +	base[REG_CH] = of_iomap(node, 0);
> +	if (!base[0]) {

if (!base[REG_CH]) {

> +		pr_err("failed to map registers for clocksource\n");
> +		goto free_clk;
> +	}
>
> -	res[REG_CH] = platform_get_resource(p->pdev,
> -					    IORESOURCE_MEM, REG_CH);
> -	res[REG_COMM] = platform_get_resource(p->pdev,
> -					      IORESOURCE_MEM, REG_COMM);
> -	if (!res[REG_CH] || !res[REG_COMM]) {
> -		dev_err(&p->pdev->dev, "failed to get I/O memory\n");
> -		return -ENXIO;
> +	base[REG_COMM] = of_iomap(node, 1);
> +	if (!base[1]) {

if (!base[REG_COMM]) {

> +		pr_err("failed to map registers for clocksource\n");
> +		goto unmap_ch;
>   	}
> -	irq = platform_get_irq(p->pdev, 0);
> +
> +	irq = irq_of_parse_and_map(node, 0);
>   	if (irq < 0) {
> -		dev_err(&p->pdev->dev, "failed to get irq\n");
> -		return irq;
> +		pr_err("failed to get irq for clockevent\n");
> +		goto unmap_comm;
>   	}
>
> -	p->clk = clk_get(&p->pdev->dev, "fck");
> -	if (IS_ERR(p->clk)) {
> -		dev_err(&p->pdev->dev, "can't get clk\n");
> -		return PTR_ERR(p->clk);
> +	p = kzalloc(sizeof(*p), GFP_KERNEL);
> +	if (!p) {
> +		pr_err("failed to allocate memory for clocksource\n");

No need to add an error for an allocation error and as the module 
static, this variable could be static also and initialized directly when 
declared.

> +		goto unmap_comm;
>   	}
> -	of_property_read_u32(p->pdev->dev.of_node, "renesas,channel", &ch);
>
> -	p->pdev = pdev;
> -	p->mapbase = res[REG_CH]->start;
> -	p->mapcommon = res[REG_COMM]->start;
> +	of_property_read_u32(node, "renesas,channel", &ch);
> +
> +	p->mapbase = (unsigned long)base[REG_CH];
> +	p->mapcommon = (unsigned long)base[REG_COMM];
>   	p->enb = 1 << ch;
>   	p->imfa = 1 << ch;
>   	p->imiea = 1 << (4 + ch);
> -	p->cs.name = pdev->name;
> +
> +	p->irqaction.name = node->name;
> +	p->irqaction.handler = timer16_interrupt;
> +	p->irqaction.dev_id = p;
> +	p->irqaction.flags = IRQF_TIMER;
> +
> +	p->cs.name = node->name;
>   	p->cs.rating = 200;
>   	p->cs.read = timer16_clocksource_read;
>   	p->cs.enable = timer16_enable;
> @@ -191,64 +207,23 @@ static int timer16_setup(struct timer16_priv *p, struct platform_device *pdev)
>   	p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
>   	p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
>
> -	ret = request_irq(irq, timer16_interrupt,
> -			  IRQF_TIMER, pdev->name, p);
> +	ret = setup_irq(irq, &p->irqaction);

It is better to keep request_irq.

>   	if (ret < 0) {
> -		dev_err(&p->pdev->dev, "failed to request irq %d\n", irq);
> -		return ret;
> +		pr_err("failed to request irq %d of clocksource\n", irq);
> +		goto free_priv;
>   	}
>
>   	clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 8);
> -
> -	return 0;
> -}


-- 
  <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v2] h8300: cleanup startup and remove module code.
  2015-11-04  7:35 [PATCH] h8300: Initialize cleanup and remove module code Yoshinori Sato
  2015-11-04 13:49 ` Daniel Lezcano
@ 2015-11-06  7:03 ` Yoshinori Sato
  2015-11-06 11:37   ` Daniel Lezcano
  1 sibling, 1 reply; 6+ messages in thread
From: Yoshinori Sato @ 2015-11-06  7:03 UTC (permalink / raw)
  To: Daniel Lezcano, Thomas Gleixner; +Cc: Yoshinori Sato, linux-kernel

h8300's clocksource driver update.
Changes for v1
- Drop non-initialize changes.
- Private data static allocation.
- Avoid magic number.
- Use request_irq.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
 drivers/clocksource/h8300_timer16.c | 142 +++++++++++++--------------------
 drivers/clocksource/h8300_timer8.c  | 151 ++++++++++++------------------------
 drivers/clocksource/h8300_tpu.c     | 118 ++++++++++------------------
 3 files changed, 144 insertions(+), 267 deletions(-)

diff --git a/drivers/clocksource/h8300_timer16.c b/drivers/clocksource/h8300_timer16.c
index 82941c1..cdf0d83 100644
--- a/drivers/clocksource/h8300_timer16.c
+++ b/drivers/clocksource/h8300_timer16.c
@@ -17,6 +17,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #include <asm/segment.h>
 #include <asm/irq.h>
@@ -47,9 +49,7 @@
 #define ABSOLUTE 1
 
 struct timer16_priv {
-	struct platform_device *pdev;
 	struct clocksource cs;
-	struct irqaction irqaction;
 	unsigned long total_cycles;
 	unsigned long mapbase;
 	unsigned long mapcommon;
@@ -144,111 +144,77 @@ static void timer16_disable(struct clocksource *cs)
 	p->cs_enabled = false;
 }
 
+static struct timer16_priv timer16_priv = {
+	.cs = {
+		.name = "h8300_16timer",
+		.rating = 200,
+		.read = timer16_clocksource_read,
+		.enable = timer16_enable,
+		.disable = timer16_disable,
+		.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8),
+		.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+	},
+};
+
 #define REG_CH   0
 #define REG_COMM 1
 
-static int timer16_setup(struct timer16_priv *p, struct platform_device *pdev)
+static void __init h8300_16timer_init(struct device_node *node)
 {
-	struct resource *res[2];
+	void __iomem *base[2];
 	int ret, irq;
 	unsigned int ch;
+	struct clk *clk;
 
-	memset(p, 0, sizeof(*p));
-	p->pdev = pdev;
-
-	res[REG_CH] = platform_get_resource(p->pdev,
-					    IORESOURCE_MEM, REG_CH);
-	res[REG_COMM] = platform_get_resource(p->pdev,
-					      IORESOURCE_MEM, REG_COMM);
-	if (!res[REG_CH] || !res[REG_COMM]) {
-		dev_err(&p->pdev->dev, "failed to get I/O memory\n");
-		return -ENXIO;
-	}
-	irq = platform_get_irq(p->pdev, 0);
-	if (irq < 0) {
-		dev_err(&p->pdev->dev, "failed to get irq\n");
-		return irq;
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk)) {
+		pr_err("failed to get clock for clocksource\n");
+		return;
 	}
 
-	p->clk = clk_get(&p->pdev->dev, "fck");
-	if (IS_ERR(p->clk)) {
-		dev_err(&p->pdev->dev, "can't get clk\n");
-		return PTR_ERR(p->clk);
+	base[REG_CH] = of_iomap(node, 0);
+	if (!base[REG_CH]) {
+		pr_err("failed to map registers for clocksource\n");
+		goto free_clk;
 	}
-	of_property_read_u32(p->pdev->dev.of_node, "renesas,channel", &ch);
-
-	p->pdev = pdev;
-	p->mapbase = res[REG_CH]->start;
-	p->mapcommon = res[REG_COMM]->start;
-	p->enb = 1 << ch;
-	p->imfa = 1 << ch;
-	p->imiea = 1 << (4 + ch);
-	p->cs.name = pdev->name;
-	p->cs.rating = 200;
-	p->cs.read = timer16_clocksource_read;
-	p->cs.enable = timer16_enable;
-	p->cs.disable = timer16_disable;
-	p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
-	p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
 
-	ret = request_irq(irq, timer16_interrupt,
-			  IRQF_TIMER, pdev->name, p);
-	if (ret < 0) {
-		dev_err(&p->pdev->dev, "failed to request irq %d\n", irq);
-		return ret;
+	base[REG_COMM] = of_iomap(node, 1);
+	if (!base[REG_COMM]) {
+		pr_err("failed to map registers for clocksource\n");
+		goto unmap_ch;
 	}
 
-	clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 8);
-
-	return 0;
-}
-
-static int timer16_probe(struct platform_device *pdev)
-{
-	struct timer16_priv *p = platform_get_drvdata(pdev);
-
-	if (p) {
-		dev_info(&pdev->dev, "kept as earlytimer\n");
-		return 0;
+	irq = irq_of_parse_and_map(node, 0);
+	if (irq < 0) {
+		pr_err("failed to get irq for clockevent\n");
+		goto unmap_comm;
 	}
 
-	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
-	if (!p)
-		return -ENOMEM;
+	of_property_read_u32(node, "renesas,channel", &ch);
 
-	return timer16_setup(p, pdev);
-}
+	timer16_priv.mapbase = (unsigned long)base[REG_CH];
+	timer16_priv.mapcommon = (unsigned long)base[REG_COMM];
+	timer16_priv.enb = 1 << ch;
+	timer16_priv.imfa = 1 << ch;
+	timer16_priv.imiea = 1 << (4 + ch);
 
-static int timer16_remove(struct platform_device *pdev)
-{
-	return -EBUSY;
-}
-
-static const struct of_device_id timer16_of_table[] = {
-	{ .compatible = "renesas,16bit-timer" },
-	{ }
-};
-static struct platform_driver timer16_driver = {
-	.probe		= timer16_probe,
-	.remove		= timer16_remove,
-	.driver		= {
-		.name	= "h8300h-16timer",
-		.of_match_table = of_match_ptr(timer16_of_table),
+	ret = request_irq(irq, timer16_interrupt,
+			  IRQF_TIMER, timer16_priv.cs.name, &timer16_priv);
+	if (ret < 0) {
+		pr_err("failed to request irq %d of clocksource\n", irq);
+		goto unmap_comm;
 	}
-};
 
-static int __init timer16_init(void)
-{
-	return platform_driver_register(&timer16_driver);
-}
+	clocksource_register_hz(&timer16_priv.cs,
+				clk_get_rate(timer16_priv.clk) / 8);
+	return;
 
-static void __exit timer16_exit(void)
-{
-	platform_driver_unregister(&timer16_driver);
+unmap_comm:
+	iounmap(base[REG_COMM]);
+unmap_ch:
+	iounmap(base[REG_CH]);
+free_clk:
+	clk_put(clk);
 }
 
-subsys_initcall(timer16_init);
-module_exit(timer16_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8/300H 16bit Timer Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_16bit, "renesas,16bit-timer", h8300_16timer_init);
diff --git a/drivers/clocksource/h8300_timer8.c b/drivers/clocksource/h8300_timer8.c
index e83db7b..5bb4e09 100644
--- a/drivers/clocksource/h8300_timer8.c
+++ b/drivers/clocksource/h8300_timer8.c
@@ -12,13 +12,14 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
-#include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/clockchips.h>
 #include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #include <asm/irq.h>
 
@@ -39,10 +40,10 @@
 #define RELATIVE 0
 #define ABSOLUTE 1
 
+#define SCALE 64
+
 struct timer8_priv {
-	struct platform_device *pdev;
 	struct clock_event_device ced;
-	struct irqaction irqaction;
 	unsigned long mapbase;
 	raw_spinlock_t lock;
 	unsigned long flags;
@@ -112,7 +113,7 @@ static void timer8_set_next(struct timer8_priv *p, unsigned long delta)
 
 static int timer8_enable(struct timer8_priv *p)
 {
-	p->rate = clk_get_rate(p->pclk) / 64;
+	p->rate = clk_get_rate(p->pclk) / SCALE;
 	ctrl_outw(0xffff, p->mapbase + TCORA);
 	ctrl_outw(0x0000, p->mapbase + _8TCNT);
 	ctrl_outw(0x0c02, p->mapbase + _8TCR);
@@ -180,7 +181,7 @@ static int timer8_clock_event_periodic(struct clock_event_device *ced)
 {
 	struct timer8_priv *p = ced_to_priv(ced);
 
-	dev_info(&p->pdev->dev, "used for periodic clock events\n");
+	pr_info("%s: used for periodic clock events\n", ced->name);
 	timer8_stop(p);
 	timer8_clock_event_start(p, PERIODIC);
 
@@ -191,7 +192,7 @@ static int timer8_clock_event_oneshot(struct clock_event_device *ced)
 {
 	struct timer8_priv *p = ced_to_priv(ced);
 
-	dev_info(&p->pdev->dev, "used for oneshot clock events\n");
+	pr_info("%s: used for oneshot clock events\n", ced->name);
 	timer8_stop(p);
 	timer8_clock_event_start(p, ONESHOT);
 
@@ -209,111 +210,61 @@ static int timer8_clock_event_next(unsigned long delta,
 	return 0;
 }
 
-static int timer8_setup(struct timer8_priv *p,
-			struct platform_device *pdev)
+static struct timer8_priv timer8_priv = {
+	.ced = {
+		.name = "h8300_8timer",
+		.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+		.rating = 200,
+		.set_next_event = timer8_clock_event_next,
+		.set_state_shutdown = timer8_clock_event_shutdown,
+		.set_state_periodic = timer8_clock_event_periodic,
+		.set_state_oneshot = timer8_clock_event_oneshot,
+	},
+};
+
+static void __init h8300_8timer_init(struct device_node *node)
 {
-	struct resource *res;
+	void __iomem *base;
 	int irq;
-	int ret;
+	int ret = 0;
+	int rate;
+	struct clk *clk;
 
-	memset(p, 0, sizeof(*p));
-	p->pdev = pdev;
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk)) {
+		pr_err("failed to get clock for clockevent\n");
+		return;
+	}
 
-	res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&p->pdev->dev, "failed to get I/O memory\n");
-		return -ENXIO;
+	base = of_iomap(node, 0);
+	if (!base) {
+		pr_err("failed to map registers for clockevent\n");
+		goto free_clk;
 	}
 
-	irq = platform_get_irq(p->pdev, 0);
+	irq = irq_of_parse_and_map(node, 0);
 	if (irq < 0) {
-		dev_err(&p->pdev->dev, "failed to get irq\n");
-		return -ENXIO;
+		pr_err("failed to get irq for clockevent\n");
+		goto unmap_reg;
 	}
 
-	p->mapbase = res->start;
-
-	p->irqaction.name = dev_name(&p->pdev->dev);
-	p->irqaction.handler = timer8_interrupt;
-	p->irqaction.dev_id = p;
-	p->irqaction.flags = IRQF_TIMER;
-
-	p->pclk = clk_get(&p->pdev->dev, "fck");
-	if (IS_ERR(p->pclk)) {
-		dev_err(&p->pdev->dev, "can't get clk\n");
-		return PTR_ERR(p->pclk);
-	}
+	timer8_priv.mapbase = (unsigned long)base;
+	timer8_priv.pclk = clk;
 
-	p->ced.name = pdev->name;
-	p->ced.features = CLOCK_EVT_FEAT_PERIODIC |
-		CLOCK_EVT_FEAT_ONESHOT;
-	p->ced.rating = 200;
-	p->ced.cpumask = cpumask_of(0);
-	p->ced.set_next_event = timer8_clock_event_next;
-	p->ced.set_state_shutdown = timer8_clock_event_shutdown;
-	p->ced.set_state_periodic = timer8_clock_event_periodic;
-	p->ced.set_state_oneshot = timer8_clock_event_oneshot;
-
-	ret = setup_irq(irq, &p->irqaction);
+	ret = request_irq(irq, timer8_interrupt,
+			  IRQF_TIMER, timer8_priv.ced.name, &timer8_priv);
 	if (ret < 0) {
-		dev_err(&p->pdev->dev,
-			"failed to request irq %d\n", irq);
-		return ret;
+		pr_err("failed to request irq %d for clockevent\n", irq);
+		goto unmap_reg;
 	}
-	clockevents_register_device(&p->ced);
-	platform_set_drvdata(pdev, p);
-
-	return 0;
-}
-
-static int timer8_probe(struct platform_device *pdev)
-{
-	struct timer8_priv *p = platform_get_drvdata(pdev);
-
-	if (p) {
-		dev_info(&pdev->dev, "kept as earlytimer\n");
-		return 0;
-	}
-
-	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
-	if (!p)
-		return -ENOMEM;
-
-	return timer8_setup(p, pdev);
-}
-
-static int timer8_remove(struct platform_device *pdev)
-{
-	return -EBUSY;
-}
-
-static const struct of_device_id timer8_of_table[] __maybe_unused = {
-	{ .compatible = "renesas,8bit-timer" },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(of, timer8_of_table);
-static struct platform_driver timer8_driver = {
-	.probe		= timer8_probe,
-	.remove		= timer8_remove,
-	.driver		= {
-		.name	= "h8300-8timer",
-		.of_match_table = of_match_ptr(timer8_of_table),
-	}
-};
-
-static int __init timer8_init(void)
-{
-	return platform_driver_register(&timer8_driver);
-}
-
-static void __exit timer8_exit(void)
-{
-	platform_driver_unregister(&timer8_driver);
+	rate = clk_get_rate(clk) / SCALE;
+	clockevents_config_and_register(&timer8_priv.ced, rate, 1, 0x0000ffff);
+	return;
+
+unmap_reg:
+	iounmap(base);
+free_clk:
+	clk_put(clk);
 }
 
-subsys_initcall(timer8_init);
-module_exit(timer8_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8/300 8bit Timer Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_8bit, "renesas,8bit-timer", h8300_8timer_init);
diff --git a/drivers/clocksource/h8300_tpu.c b/drivers/clocksource/h8300_tpu.c
index 64195fd..ed0b493 100644
--- a/drivers/clocksource/h8300_tpu.c
+++ b/drivers/clocksource/h8300_tpu.c
@@ -1,5 +1,5 @@
 /*
- *  H8/300 TPU Driver
+ *  H8S TPU Driver
  *
  *  Copyright 2015 Yoshinori Sato <ysato@users.sourcefoge.jp>
  *
@@ -17,8 +17,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/of.h>
-
-#include <asm/irq.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #define TCR	0
 #define TMDR	1
@@ -32,9 +32,7 @@
 #define TGRD	14
 
 struct tpu_priv {
-	struct platform_device *pdev;
 	struct clocksource cs;
-	struct clk *clk;
 	unsigned long mapbase1;
 	unsigned long mapbase2;
 	raw_spinlock_t lock;
@@ -116,92 +114,54 @@ static void tpu_clocksource_disable(struct clocksource *cs)
 	p->cs_enabled = false;
 }
 
+static struct tpu_priv tpu_priv = {
+	.cs = {
+		.name = "H8S_TPU",
+		.rating = 200,
+		.read = tpu_clocksource_read,
+		.enable = tpu_clocksource_enable,
+		.disable = tpu_clocksource_disable,
+		.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8),
+		.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+	},
+};
+
 #define CH_L 0
 #define CH_H 1
 
-static int __init tpu_setup(struct tpu_priv *p, struct platform_device *pdev)
+static void __init h8300_tpu_init(struct device_node *node)
 {
-	struct resource *res[2];
-
-	memset(p, 0, sizeof(*p));
-	p->pdev = pdev;
+	void __iomem *base[2];
+	struct clk *clk;
 
-	res[CH_L] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_L);
-	res[CH_H] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_H);
-	if (!res[CH_L] || !res[CH_H]) {
-		dev_err(&p->pdev->dev, "failed to get I/O memory\n");
-		return -ENXIO;
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk)) {
+		pr_err("failed to get clock for clocksource\n");
+		return;
 	}
 
-	p->clk = clk_get(&p->pdev->dev, "fck");
-	if (IS_ERR(p->clk)) {
-		dev_err(&p->pdev->dev, "can't get clk\n");
-		return PTR_ERR(p->clk);
+	base[CH_L] = of_iomap(node, CH_L);
+	if (!base[CH_L]) {
+		pr_err("failed to map registers for clocksource\n");
+		goto free_clk;
 	}
-
-	p->mapbase1 = res[CH_L]->start;
-	p->mapbase2 = res[CH_H]->start;
-
-	p->cs.name = pdev->name;
-	p->cs.rating = 200;
-	p->cs.read = tpu_clocksource_read;
-	p->cs.enable = tpu_clocksource_enable;
-	p->cs.disable = tpu_clocksource_disable;
-	p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
-	p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
-	clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 64);
-	platform_set_drvdata(pdev, p);
-
-	return 0;
-}
-
-static int tpu_probe(struct platform_device *pdev)
-{
-	struct tpu_priv *p = platform_get_drvdata(pdev);
-
-	if (p) {
-		dev_info(&pdev->dev, "kept as earlytimer\n");
-		return 0;
+	base[CH_H] = of_iomap(node, CH_H);
+	if (!base[CH_H]) {
+		pr_err("failed to map registers for clocksource\n");
+		goto unmap_L;
 	}
 
-	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
-	if (!p)
-		return -ENOMEM;
+	tpu_priv.mapbase1 = (unsigned long)base[CH_L];
+	tpu_priv.mapbase2 = (unsigned long)base[CH_H];
 
-	return tpu_setup(p, pdev);
-}
+	clocksource_register_hz(&tpu_priv.cs, clk_get_rate(clk) / 64);
 
-static int tpu_remove(struct platform_device *pdev)
-{
-	return -EBUSY;
-}
+	return;
 
-static const struct of_device_id tpu_of_table[] = {
-	{ .compatible = "renesas,tpu" },
-	{ }
-};
-
-static struct platform_driver tpu_driver = {
-	.probe		= tpu_probe,
-	.remove		= tpu_remove,
-	.driver		= {
-		.name	= "h8s-tpu",
-		.of_match_table = of_match_ptr(tpu_of_table),
-	}
-};
-
-static int __init tpu_init(void)
-{
-	return platform_driver_register(&tpu_driver);
-}
-
-static void __exit tpu_exit(void)
-{
-	platform_driver_unregister(&tpu_driver);
+unmap_L:
+	iounmap(base[CH_H]);
+free_clk:
+	clk_put(clk);
 }
 
-subsys_initcall(tpu_init);
-module_exit(tpu_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8S Timer Pulse Unit Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_tpu, "renesas,tpu", h8300_tpu_init);
-- 
2.6.1


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* Re: [PATCH v2] h8300: cleanup startup and remove module code.
  2015-11-06  7:03 ` [PATCH v2] h8300: cleanup startup " Yoshinori Sato
@ 2015-11-06 11:37   ` Daniel Lezcano
  2015-11-06 16:31     ` [PATCH v3] " Yoshinori Sato
  0 siblings, 1 reply; 6+ messages in thread
From: Daniel Lezcano @ 2015-11-06 11:37 UTC (permalink / raw)
  To: Yoshinori Sato, Thomas Gleixner; +Cc: linux-kernel

On 11/06/2015 08:03 AM, Yoshinori Sato wrote:
> h8300's clocksource driver update.
> Changes for v1
> - Drop non-initialize changes.
> - Private data static allocation.
> - Avoid magic number.
> - Use request_irq.

Hi Yoshinori,

thanks for the changes.

Unfortunately, they don't apply.

You should base your changes on top of:

git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git tip/timers/core

In order to have the latest changes with the h8300. One of them in the 
removal of the memset.

Regards

   -- Daniel

> Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
> ---
>   drivers/clocksource/h8300_timer16.c | 142 +++++++++++++--------------------
>   drivers/clocksource/h8300_timer8.c  | 151 ++++++++++++------------------------
>   drivers/clocksource/h8300_tpu.c     | 118 ++++++++++------------------
>   3 files changed, 144 insertions(+), 267 deletions(-)
>
> diff --git a/drivers/clocksource/h8300_timer16.c b/drivers/clocksource/h8300_timer16.c
> index 82941c1..cdf0d83 100644
> --- a/drivers/clocksource/h8300_timer16.c
> +++ b/drivers/clocksource/h8300_timer16.c
> @@ -17,6 +17,8 @@
>   #include <linux/clk.h>
>   #include <linux/io.h>
>   #include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
>
>   #include <asm/segment.h>
>   #include <asm/irq.h>
> @@ -47,9 +49,7 @@
>   #define ABSOLUTE 1
>
>   struct timer16_priv {
> -	struct platform_device *pdev;
>   	struct clocksource cs;
> -	struct irqaction irqaction;
>   	unsigned long total_cycles;
>   	unsigned long mapbase;
>   	unsigned long mapcommon;
> @@ -144,111 +144,77 @@ static void timer16_disable(struct clocksource *cs)
>   	p->cs_enabled = false;
>   }
>
> +static struct timer16_priv timer16_priv = {
> +	.cs = {
> +		.name = "h8300_16timer",
> +		.rating = 200,
> +		.read = timer16_clocksource_read,
> +		.enable = timer16_enable,
> +		.disable = timer16_disable,
> +		.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8),
> +		.flags = CLOCK_SOURCE_IS_CONTINUOUS,
> +	},
> +};
> +
>   #define REG_CH   0
>   #define REG_COMM 1
>
> -static int timer16_setup(struct timer16_priv *p, struct platform_device *pdev)
> +static void __init h8300_16timer_init(struct device_node *node)
>   {
> -	struct resource *res[2];
> +	void __iomem *base[2];
>   	int ret, irq;
>   	unsigned int ch;
> +	struct clk *clk;
>
> -	memset(p, 0, sizeof(*p));
> -	p->pdev = pdev;
> -
> -	res[REG_CH] = platform_get_resource(p->pdev,
> -					    IORESOURCE_MEM, REG_CH);
> -	res[REG_COMM] = platform_get_resource(p->pdev,
> -					      IORESOURCE_MEM, REG_COMM);
> -	if (!res[REG_CH] || !res[REG_COMM]) {
> -		dev_err(&p->pdev->dev, "failed to get I/O memory\n");
> -		return -ENXIO;
> -	}
> -	irq = platform_get_irq(p->pdev, 0);
> -	if (irq < 0) {
> -		dev_err(&p->pdev->dev, "failed to get irq\n");
> -		return irq;
> +	clk = of_clk_get(node, 0);
> +	if (IS_ERR(clk)) {
> +		pr_err("failed to get clock for clocksource\n");
> +		return;
>   	}
>
> -	p->clk = clk_get(&p->pdev->dev, "fck");
> -	if (IS_ERR(p->clk)) {
> -		dev_err(&p->pdev->dev, "can't get clk\n");
> -		return PTR_ERR(p->clk);
> +	base[REG_CH] = of_iomap(node, 0);
> +	if (!base[REG_CH]) {
> +		pr_err("failed to map registers for clocksource\n");
> +		goto free_clk;
>   	}
> -	of_property_read_u32(p->pdev->dev.of_node, "renesas,channel", &ch);
> -
> -	p->pdev = pdev;
> -	p->mapbase = res[REG_CH]->start;
> -	p->mapcommon = res[REG_COMM]->start;
> -	p->enb = 1 << ch;
> -	p->imfa = 1 << ch;
> -	p->imiea = 1 << (4 + ch);
> -	p->cs.name = pdev->name;
> -	p->cs.rating = 200;
> -	p->cs.read = timer16_clocksource_read;
> -	p->cs.enable = timer16_enable;
> -	p->cs.disable = timer16_disable;
> -	p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
> -	p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
>
> -	ret = request_irq(irq, timer16_interrupt,
> -			  IRQF_TIMER, pdev->name, p);
> -	if (ret < 0) {
> -		dev_err(&p->pdev->dev, "failed to request irq %d\n", irq);
> -		return ret;
> +	base[REG_COMM] = of_iomap(node, 1);
> +	if (!base[REG_COMM]) {
> +		pr_err("failed to map registers for clocksource\n");
> +		goto unmap_ch;
>   	}
>
> -	clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 8);
> -
> -	return 0;
> -}
> -
> -static int timer16_probe(struct platform_device *pdev)
> -{
> -	struct timer16_priv *p = platform_get_drvdata(pdev);
> -
> -	if (p) {
> -		dev_info(&pdev->dev, "kept as earlytimer\n");
> -		return 0;
> +	irq = irq_of_parse_and_map(node, 0);
> +	if (irq < 0) {
> +		pr_err("failed to get irq for clockevent\n");
> +		goto unmap_comm;
>   	}
>
> -	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
> -	if (!p)
> -		return -ENOMEM;
> +	of_property_read_u32(node, "renesas,channel", &ch);
>
> -	return timer16_setup(p, pdev);
> -}
> +	timer16_priv.mapbase = (unsigned long)base[REG_CH];
> +	timer16_priv.mapcommon = (unsigned long)base[REG_COMM];
> +	timer16_priv.enb = 1 << ch;
> +	timer16_priv.imfa = 1 << ch;
> +	timer16_priv.imiea = 1 << (4 + ch);
>
> -static int timer16_remove(struct platform_device *pdev)
> -{
> -	return -EBUSY;
> -}
> -
> -static const struct of_device_id timer16_of_table[] = {
> -	{ .compatible = "renesas,16bit-timer" },
> -	{ }
> -};
> -static struct platform_driver timer16_driver = {
> -	.probe		= timer16_probe,
> -	.remove		= timer16_remove,
> -	.driver		= {
> -		.name	= "h8300h-16timer",
> -		.of_match_table = of_match_ptr(timer16_of_table),
> +	ret = request_irq(irq, timer16_interrupt,
> +			  IRQF_TIMER, timer16_priv.cs.name, &timer16_priv);
> +	if (ret < 0) {
> +		pr_err("failed to request irq %d of clocksource\n", irq);
> +		goto unmap_comm;
>   	}
> -};
>
> -static int __init timer16_init(void)
> -{
> -	return platform_driver_register(&timer16_driver);
> -}
> +	clocksource_register_hz(&timer16_priv.cs,
> +				clk_get_rate(timer16_priv.clk) / 8);
> +	return;
>
> -static void __exit timer16_exit(void)
> -{
> -	platform_driver_unregister(&timer16_driver);
> +unmap_comm:
> +	iounmap(base[REG_COMM]);
> +unmap_ch:
> +	iounmap(base[REG_CH]);
> +free_clk:
> +	clk_put(clk);
>   }
>
> -subsys_initcall(timer16_init);
> -module_exit(timer16_exit);
> -MODULE_AUTHOR("Yoshinori Sato");
> -MODULE_DESCRIPTION("H8/300H 16bit Timer Driver");
> -MODULE_LICENSE("GPL v2");
> +CLOCKSOURCE_OF_DECLARE(h8300_16bit, "renesas,16bit-timer", h8300_16timer_init);
> diff --git a/drivers/clocksource/h8300_timer8.c b/drivers/clocksource/h8300_timer8.c
> index e83db7b..5bb4e09 100644
> --- a/drivers/clocksource/h8300_timer8.c
> +++ b/drivers/clocksource/h8300_timer8.c
> @@ -12,13 +12,14 @@
>   #include <linux/kernel.h>
>   #include <linux/interrupt.h>
>   #include <linux/init.h>
> -#include <linux/platform_device.h>
>   #include <linux/slab.h>
>   #include <linux/clockchips.h>
>   #include <linux/module.h>
>   #include <linux/clk.h>
>   #include <linux/io.h>
>   #include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
>
>   #include <asm/irq.h>
>
> @@ -39,10 +40,10 @@
>   #define RELATIVE 0
>   #define ABSOLUTE 1
>
> +#define SCALE 64
> +
>   struct timer8_priv {
> -	struct platform_device *pdev;
>   	struct clock_event_device ced;
> -	struct irqaction irqaction;
>   	unsigned long mapbase;
>   	raw_spinlock_t lock;
>   	unsigned long flags;
> @@ -112,7 +113,7 @@ static void timer8_set_next(struct timer8_priv *p, unsigned long delta)
>
>   static int timer8_enable(struct timer8_priv *p)
>   {
> -	p->rate = clk_get_rate(p->pclk) / 64;
> +	p->rate = clk_get_rate(p->pclk) / SCALE;
>   	ctrl_outw(0xffff, p->mapbase + TCORA);
>   	ctrl_outw(0x0000, p->mapbase + _8TCNT);
>   	ctrl_outw(0x0c02, p->mapbase + _8TCR);
> @@ -180,7 +181,7 @@ static int timer8_clock_event_periodic(struct clock_event_device *ced)
>   {
>   	struct timer8_priv *p = ced_to_priv(ced);
>
> -	dev_info(&p->pdev->dev, "used for periodic clock events\n");
> +	pr_info("%s: used for periodic clock events\n", ced->name);
>   	timer8_stop(p);
>   	timer8_clock_event_start(p, PERIODIC);
>
> @@ -191,7 +192,7 @@ static int timer8_clock_event_oneshot(struct clock_event_device *ced)
>   {
>   	struct timer8_priv *p = ced_to_priv(ced);
>
> -	dev_info(&p->pdev->dev, "used for oneshot clock events\n");
> +	pr_info("%s: used for oneshot clock events\n", ced->name);
>   	timer8_stop(p);
>   	timer8_clock_event_start(p, ONESHOT);
>
> @@ -209,111 +210,61 @@ static int timer8_clock_event_next(unsigned long delta,
>   	return 0;
>   }
>
> -static int timer8_setup(struct timer8_priv *p,
> -			struct platform_device *pdev)
> +static struct timer8_priv timer8_priv = {
> +	.ced = {
> +		.name = "h8300_8timer",
> +		.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
> +		.rating = 200,
> +		.set_next_event = timer8_clock_event_next,
> +		.set_state_shutdown = timer8_clock_event_shutdown,
> +		.set_state_periodic = timer8_clock_event_periodic,
> +		.set_state_oneshot = timer8_clock_event_oneshot,
> +	},
> +};
> +
> +static void __init h8300_8timer_init(struct device_node *node)
>   {
> -	struct resource *res;
> +	void __iomem *base;
>   	int irq;
> -	int ret;
> +	int ret = 0;
> +	int rate;
> +	struct clk *clk;
>
> -	memset(p, 0, sizeof(*p));
> -	p->pdev = pdev;
> +	clk = of_clk_get(node, 0);
> +	if (IS_ERR(clk)) {
> +		pr_err("failed to get clock for clockevent\n");
> +		return;
> +	}
>
> -	res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0);
> -	if (!res) {
> -		dev_err(&p->pdev->dev, "failed to get I/O memory\n");
> -		return -ENXIO;
> +	base = of_iomap(node, 0);
> +	if (!base) {
> +		pr_err("failed to map registers for clockevent\n");
> +		goto free_clk;
>   	}
>
> -	irq = platform_get_irq(p->pdev, 0);
> +	irq = irq_of_parse_and_map(node, 0);
>   	if (irq < 0) {
> -		dev_err(&p->pdev->dev, "failed to get irq\n");
> -		return -ENXIO;
> +		pr_err("failed to get irq for clockevent\n");
> +		goto unmap_reg;
>   	}
>
> -	p->mapbase = res->start;
> -
> -	p->irqaction.name = dev_name(&p->pdev->dev);
> -	p->irqaction.handler = timer8_interrupt;
> -	p->irqaction.dev_id = p;
> -	p->irqaction.flags = IRQF_TIMER;
> -
> -	p->pclk = clk_get(&p->pdev->dev, "fck");
> -	if (IS_ERR(p->pclk)) {
> -		dev_err(&p->pdev->dev, "can't get clk\n");
> -		return PTR_ERR(p->pclk);
> -	}
> +	timer8_priv.mapbase = (unsigned long)base;
> +	timer8_priv.pclk = clk;
>
> -	p->ced.name = pdev->name;
> -	p->ced.features = CLOCK_EVT_FEAT_PERIODIC |
> -		CLOCK_EVT_FEAT_ONESHOT;
> -	p->ced.rating = 200;
> -	p->ced.cpumask = cpumask_of(0);
> -	p->ced.set_next_event = timer8_clock_event_next;
> -	p->ced.set_state_shutdown = timer8_clock_event_shutdown;
> -	p->ced.set_state_periodic = timer8_clock_event_periodic;
> -	p->ced.set_state_oneshot = timer8_clock_event_oneshot;
> -
> -	ret = setup_irq(irq, &p->irqaction);
> +	ret = request_irq(irq, timer8_interrupt,
> +			  IRQF_TIMER, timer8_priv.ced.name, &timer8_priv);
>   	if (ret < 0) {
> -		dev_err(&p->pdev->dev,
> -			"failed to request irq %d\n", irq);
> -		return ret;
> +		pr_err("failed to request irq %d for clockevent\n", irq);
> +		goto unmap_reg;
>   	}
> -	clockevents_register_device(&p->ced);
> -	platform_set_drvdata(pdev, p);
> -
> -	return 0;
> -}
> -
> -static int timer8_probe(struct platform_device *pdev)
> -{
> -	struct timer8_priv *p = platform_get_drvdata(pdev);
> -
> -	if (p) {
> -		dev_info(&pdev->dev, "kept as earlytimer\n");
> -		return 0;
> -	}
> -
> -	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
> -	if (!p)
> -		return -ENOMEM;
> -
> -	return timer8_setup(p, pdev);
> -}
> -
> -static int timer8_remove(struct platform_device *pdev)
> -{
> -	return -EBUSY;
> -}
> -
> -static const struct of_device_id timer8_of_table[] __maybe_unused = {
> -	{ .compatible = "renesas,8bit-timer" },
> -	{ }
> -};
> -
> -MODULE_DEVICE_TABLE(of, timer8_of_table);
> -static struct platform_driver timer8_driver = {
> -	.probe		= timer8_probe,
> -	.remove		= timer8_remove,
> -	.driver		= {
> -		.name	= "h8300-8timer",
> -		.of_match_table = of_match_ptr(timer8_of_table),
> -	}
> -};
> -
> -static int __init timer8_init(void)
> -{
> -	return platform_driver_register(&timer8_driver);
> -}
> -
> -static void __exit timer8_exit(void)
> -{
> -	platform_driver_unregister(&timer8_driver);
> +	rate = clk_get_rate(clk) / SCALE;
> +	clockevents_config_and_register(&timer8_priv.ced, rate, 1, 0x0000ffff);
> +	return;
> +
> +unmap_reg:
> +	iounmap(base);
> +free_clk:
> +	clk_put(clk);
>   }
>
> -subsys_initcall(timer8_init);
> -module_exit(timer8_exit);
> -MODULE_AUTHOR("Yoshinori Sato");
> -MODULE_DESCRIPTION("H8/300 8bit Timer Driver");
> -MODULE_LICENSE("GPL v2");
> +CLOCKSOURCE_OF_DECLARE(h8300_8bit, "renesas,8bit-timer", h8300_8timer_init);
> diff --git a/drivers/clocksource/h8300_tpu.c b/drivers/clocksource/h8300_tpu.c
> index 64195fd..ed0b493 100644
> --- a/drivers/clocksource/h8300_tpu.c
> +++ b/drivers/clocksource/h8300_tpu.c
> @@ -1,5 +1,5 @@
>   /*
> - *  H8/300 TPU Driver
> + *  H8S TPU Driver
>    *
>    *  Copyright 2015 Yoshinori Sato <ysato@users.sourcefoge.jp>
>    *
> @@ -17,8 +17,8 @@
>   #include <linux/clk.h>
>   #include <linux/io.h>
>   #include <linux/of.h>
> -
> -#include <asm/irq.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
>
>   #define TCR	0
>   #define TMDR	1
> @@ -32,9 +32,7 @@
>   #define TGRD	14
>
>   struct tpu_priv {
> -	struct platform_device *pdev;
>   	struct clocksource cs;
> -	struct clk *clk;
>   	unsigned long mapbase1;
>   	unsigned long mapbase2;
>   	raw_spinlock_t lock;
> @@ -116,92 +114,54 @@ static void tpu_clocksource_disable(struct clocksource *cs)
>   	p->cs_enabled = false;
>   }
>
> +static struct tpu_priv tpu_priv = {
> +	.cs = {
> +		.name = "H8S_TPU",
> +		.rating = 200,
> +		.read = tpu_clocksource_read,
> +		.enable = tpu_clocksource_enable,
> +		.disable = tpu_clocksource_disable,
> +		.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8),
> +		.flags = CLOCK_SOURCE_IS_CONTINUOUS,
> +	},
> +};
> +
>   #define CH_L 0
>   #define CH_H 1
>
> -static int __init tpu_setup(struct tpu_priv *p, struct platform_device *pdev)
> +static void __init h8300_tpu_init(struct device_node *node)
>   {
> -	struct resource *res[2];
> -
> -	memset(p, 0, sizeof(*p));
> -	p->pdev = pdev;
> +	void __iomem *base[2];
> +	struct clk *clk;
>
> -	res[CH_L] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_L);
> -	res[CH_H] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_H);
> -	if (!res[CH_L] || !res[CH_H]) {
> -		dev_err(&p->pdev->dev, "failed to get I/O memory\n");
> -		return -ENXIO;
> +	clk = of_clk_get(node, 0);
> +	if (IS_ERR(clk)) {
> +		pr_err("failed to get clock for clocksource\n");
> +		return;
>   	}
>
> -	p->clk = clk_get(&p->pdev->dev, "fck");
> -	if (IS_ERR(p->clk)) {
> -		dev_err(&p->pdev->dev, "can't get clk\n");
> -		return PTR_ERR(p->clk);
> +	base[CH_L] = of_iomap(node, CH_L);
> +	if (!base[CH_L]) {
> +		pr_err("failed to map registers for clocksource\n");
> +		goto free_clk;
>   	}
> -
> -	p->mapbase1 = res[CH_L]->start;
> -	p->mapbase2 = res[CH_H]->start;
> -
> -	p->cs.name = pdev->name;
> -	p->cs.rating = 200;
> -	p->cs.read = tpu_clocksource_read;
> -	p->cs.enable = tpu_clocksource_enable;
> -	p->cs.disable = tpu_clocksource_disable;
> -	p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
> -	p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
> -	clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 64);
> -	platform_set_drvdata(pdev, p);
> -
> -	return 0;
> -}
> -
> -static int tpu_probe(struct platform_device *pdev)
> -{
> -	struct tpu_priv *p = platform_get_drvdata(pdev);
> -
> -	if (p) {
> -		dev_info(&pdev->dev, "kept as earlytimer\n");
> -		return 0;
> +	base[CH_H] = of_iomap(node, CH_H);
> +	if (!base[CH_H]) {
> +		pr_err("failed to map registers for clocksource\n");
> +		goto unmap_L;
>   	}
>
> -	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
> -	if (!p)
> -		return -ENOMEM;
> +	tpu_priv.mapbase1 = (unsigned long)base[CH_L];
> +	tpu_priv.mapbase2 = (unsigned long)base[CH_H];
>
> -	return tpu_setup(p, pdev);
> -}
> +	clocksource_register_hz(&tpu_priv.cs, clk_get_rate(clk) / 64);
>
> -static int tpu_remove(struct platform_device *pdev)
> -{
> -	return -EBUSY;
> -}
> +	return;
>
> -static const struct of_device_id tpu_of_table[] = {
> -	{ .compatible = "renesas,tpu" },
> -	{ }
> -};
> -
> -static struct platform_driver tpu_driver = {
> -	.probe		= tpu_probe,
> -	.remove		= tpu_remove,
> -	.driver		= {
> -		.name	= "h8s-tpu",
> -		.of_match_table = of_match_ptr(tpu_of_table),
> -	}
> -};
> -
> -static int __init tpu_init(void)
> -{
> -	return platform_driver_register(&tpu_driver);
> -}
> -
> -static void __exit tpu_exit(void)
> -{
> -	platform_driver_unregister(&tpu_driver);
> +unmap_L:
> +	iounmap(base[CH_H]);
> +free_clk:
> +	clk_put(clk);
>   }
>
> -subsys_initcall(tpu_init);
> -module_exit(tpu_exit);
> -MODULE_AUTHOR("Yoshinori Sato");
> -MODULE_DESCRIPTION("H8S Timer Pulse Unit Driver");
> -MODULE_LICENSE("GPL v2");
> +CLOCKSOURCE_OF_DECLARE(h8300_tpu, "renesas,tpu", h8300_tpu_init);
>


-- 
  <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v3] h8300: cleanup startup and remove module code.
  2015-11-06 11:37   ` Daniel Lezcano
@ 2015-11-06 16:31     ` Yoshinori Sato
  2015-11-06 16:42       ` Daniel Lezcano
  0 siblings, 1 reply; 6+ messages in thread
From: Yoshinori Sato @ 2015-11-06 16:31 UTC (permalink / raw)
  To: Daniel Lezcano, Thomas Gleixner; +Cc: Yoshinori Sato, linux-kernel

h8300's clocksource driver update.
Changes for v2
- Diff base on 6ddcedf38a75f94bf662438afd7ed8c7837ab00e

Changes for v1
- Drop non-initialize changes.
- Private data static allocation.
- Avoid magic number.
- Use request_irq.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
 drivers/clocksource/h8300_timer16.c | 141 +++++++++++++--------------------
 drivers/clocksource/h8300_timer8.c  | 150 ++++++++++++------------------------
 drivers/clocksource/h8300_tpu.c     | 117 ++++++++++------------------
 3 files changed, 144 insertions(+), 264 deletions(-)

diff --git a/drivers/clocksource/h8300_timer16.c b/drivers/clocksource/h8300_timer16.c
index 0e076c6..cdf0d83 100644
--- a/drivers/clocksource/h8300_timer16.c
+++ b/drivers/clocksource/h8300_timer16.c
@@ -17,6 +17,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #include <asm/segment.h>
 #include <asm/irq.h>
@@ -47,9 +49,7 @@
 #define ABSOLUTE 1
 
 struct timer16_priv {
-	struct platform_device *pdev;
 	struct clocksource cs;
-	struct irqaction irqaction;
 	unsigned long total_cycles;
 	unsigned long mapbase;
 	unsigned long mapcommon;
@@ -144,110 +144,77 @@ static void timer16_disable(struct clocksource *cs)
 	p->cs_enabled = false;
 }
 
+static struct timer16_priv timer16_priv = {
+	.cs = {
+		.name = "h8300_16timer",
+		.rating = 200,
+		.read = timer16_clocksource_read,
+		.enable = timer16_enable,
+		.disable = timer16_disable,
+		.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8),
+		.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+	},
+};
+
 #define REG_CH   0
 #define REG_COMM 1
 
-static int timer16_setup(struct timer16_priv *p, struct platform_device *pdev)
+static void __init h8300_16timer_init(struct device_node *node)
 {
-	struct resource *res[2];
+	void __iomem *base[2];
 	int ret, irq;
 	unsigned int ch;
+	struct clk *clk;
 
-	p->pdev = pdev;
-
-	res[REG_CH] = platform_get_resource(p->pdev,
-					    IORESOURCE_MEM, REG_CH);
-	res[REG_COMM] = platform_get_resource(p->pdev,
-					      IORESOURCE_MEM, REG_COMM);
-	if (!res[REG_CH] || !res[REG_COMM]) {
-		dev_err(&p->pdev->dev, "failed to get I/O memory\n");
-		return -ENXIO;
-	}
-	irq = platform_get_irq(p->pdev, 0);
-	if (irq < 0) {
-		dev_err(&p->pdev->dev, "failed to get irq\n");
-		return irq;
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk)) {
+		pr_err("failed to get clock for clocksource\n");
+		return;
 	}
 
-	p->clk = clk_get(&p->pdev->dev, "fck");
-	if (IS_ERR(p->clk)) {
-		dev_err(&p->pdev->dev, "can't get clk\n");
-		return PTR_ERR(p->clk);
+	base[REG_CH] = of_iomap(node, 0);
+	if (!base[REG_CH]) {
+		pr_err("failed to map registers for clocksource\n");
+		goto free_clk;
 	}
-	of_property_read_u32(p->pdev->dev.of_node, "renesas,channel", &ch);
-
-	p->pdev = pdev;
-	p->mapbase = res[REG_CH]->start;
-	p->mapcommon = res[REG_COMM]->start;
-	p->enb = 1 << ch;
-	p->imfa = 1 << ch;
-	p->imiea = 1 << (4 + ch);
-	p->cs.name = pdev->name;
-	p->cs.rating = 200;
-	p->cs.read = timer16_clocksource_read;
-	p->cs.enable = timer16_enable;
-	p->cs.disable = timer16_disable;
-	p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
-	p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
 
-	ret = request_irq(irq, timer16_interrupt,
-			  IRQF_TIMER, pdev->name, p);
-	if (ret < 0) {
-		dev_err(&p->pdev->dev, "failed to request irq %d\n", irq);
-		return ret;
+	base[REG_COMM] = of_iomap(node, 1);
+	if (!base[REG_COMM]) {
+		pr_err("failed to map registers for clocksource\n");
+		goto unmap_ch;
 	}
 
-	clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 8);
-
-	return 0;
-}
-
-static int timer16_probe(struct platform_device *pdev)
-{
-	struct timer16_priv *p = platform_get_drvdata(pdev);
-
-	if (p) {
-		dev_info(&pdev->dev, "kept as earlytimer\n");
-		return 0;
+	irq = irq_of_parse_and_map(node, 0);
+	if (irq < 0) {
+		pr_err("failed to get irq for clockevent\n");
+		goto unmap_comm;
 	}
 
-	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
-	if (!p)
-		return -ENOMEM;
+	of_property_read_u32(node, "renesas,channel", &ch);
 
-	return timer16_setup(p, pdev);
-}
+	timer16_priv.mapbase = (unsigned long)base[REG_CH];
+	timer16_priv.mapcommon = (unsigned long)base[REG_COMM];
+	timer16_priv.enb = 1 << ch;
+	timer16_priv.imfa = 1 << ch;
+	timer16_priv.imiea = 1 << (4 + ch);
 
-static int timer16_remove(struct platform_device *pdev)
-{
-	return -EBUSY;
-}
-
-static const struct of_device_id timer16_of_table[] = {
-	{ .compatible = "renesas,16bit-timer" },
-	{ }
-};
-static struct platform_driver timer16_driver = {
-	.probe		= timer16_probe,
-	.remove		= timer16_remove,
-	.driver		= {
-		.name	= "h8300h-16timer",
-		.of_match_table = of_match_ptr(timer16_of_table),
+	ret = request_irq(irq, timer16_interrupt,
+			  IRQF_TIMER, timer16_priv.cs.name, &timer16_priv);
+	if (ret < 0) {
+		pr_err("failed to request irq %d of clocksource\n", irq);
+		goto unmap_comm;
 	}
-};
 
-static int __init timer16_init(void)
-{
-	return platform_driver_register(&timer16_driver);
-}
+	clocksource_register_hz(&timer16_priv.cs,
+				clk_get_rate(timer16_priv.clk) / 8);
+	return;
 
-static void __exit timer16_exit(void)
-{
-	platform_driver_unregister(&timer16_driver);
+unmap_comm:
+	iounmap(base[REG_COMM]);
+unmap_ch:
+	iounmap(base[REG_CH]);
+free_clk:
+	clk_put(clk);
 }
 
-subsys_initcall(timer16_init);
-module_exit(timer16_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8/300H 16bit Timer Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_16bit, "renesas,16bit-timer", h8300_16timer_init);
diff --git a/drivers/clocksource/h8300_timer8.c b/drivers/clocksource/h8300_timer8.c
index 6998486..5bb4e09 100644
--- a/drivers/clocksource/h8300_timer8.c
+++ b/drivers/clocksource/h8300_timer8.c
@@ -12,13 +12,14 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
-#include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/clockchips.h>
 #include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #include <asm/irq.h>
 
@@ -39,10 +40,10 @@
 #define RELATIVE 0
 #define ABSOLUTE 1
 
+#define SCALE 64
+
 struct timer8_priv {
-	struct platform_device *pdev;
 	struct clock_event_device ced;
-	struct irqaction irqaction;
 	unsigned long mapbase;
 	raw_spinlock_t lock;
 	unsigned long flags;
@@ -112,7 +113,7 @@ static void timer8_set_next(struct timer8_priv *p, unsigned long delta)
 
 static int timer8_enable(struct timer8_priv *p)
 {
-	p->rate = clk_get_rate(p->pclk) / 64;
+	p->rate = clk_get_rate(p->pclk) / SCALE;
 	ctrl_outw(0xffff, p->mapbase + TCORA);
 	ctrl_outw(0x0000, p->mapbase + _8TCNT);
 	ctrl_outw(0x0c02, p->mapbase + _8TCR);
@@ -180,7 +181,7 @@ static int timer8_clock_event_periodic(struct clock_event_device *ced)
 {
 	struct timer8_priv *p = ced_to_priv(ced);
 
-	dev_info(&p->pdev->dev, "used for periodic clock events\n");
+	pr_info("%s: used for periodic clock events\n", ced->name);
 	timer8_stop(p);
 	timer8_clock_event_start(p, PERIODIC);
 
@@ -191,7 +192,7 @@ static int timer8_clock_event_oneshot(struct clock_event_device *ced)
 {
 	struct timer8_priv *p = ced_to_priv(ced);
 
-	dev_info(&p->pdev->dev, "used for oneshot clock events\n");
+	pr_info("%s: used for oneshot clock events\n", ced->name);
 	timer8_stop(p);
 	timer8_clock_event_start(p, ONESHOT);
 
@@ -209,110 +210,61 @@ static int timer8_clock_event_next(unsigned long delta,
 	return 0;
 }
 
-static int timer8_setup(struct timer8_priv *p,
-			struct platform_device *pdev)
+static struct timer8_priv timer8_priv = {
+	.ced = {
+		.name = "h8300_8timer",
+		.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+		.rating = 200,
+		.set_next_event = timer8_clock_event_next,
+		.set_state_shutdown = timer8_clock_event_shutdown,
+		.set_state_periodic = timer8_clock_event_periodic,
+		.set_state_oneshot = timer8_clock_event_oneshot,
+	},
+};
+
+static void __init h8300_8timer_init(struct device_node *node)
 {
-	struct resource *res;
+	void __iomem *base;
 	int irq;
-	int ret;
+	int ret = 0;
+	int rate;
+	struct clk *clk;
 
-	p->pdev = pdev;
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk)) {
+		pr_err("failed to get clock for clockevent\n");
+		return;
+	}
 
-	res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&p->pdev->dev, "failed to get I/O memory\n");
-		return -ENXIO;
+	base = of_iomap(node, 0);
+	if (!base) {
+		pr_err("failed to map registers for clockevent\n");
+		goto free_clk;
 	}
 
-	irq = platform_get_irq(p->pdev, 0);
+	irq = irq_of_parse_and_map(node, 0);
 	if (irq < 0) {
-		dev_err(&p->pdev->dev, "failed to get irq\n");
-		return -ENXIO;
+		pr_err("failed to get irq for clockevent\n");
+		goto unmap_reg;
 	}
 
-	p->mapbase = res->start;
-
-	p->irqaction.name = dev_name(&p->pdev->dev);
-	p->irqaction.handler = timer8_interrupt;
-	p->irqaction.dev_id = p;
-	p->irqaction.flags = IRQF_TIMER;
-
-	p->pclk = clk_get(&p->pdev->dev, "fck");
-	if (IS_ERR(p->pclk)) {
-		dev_err(&p->pdev->dev, "can't get clk\n");
-		return PTR_ERR(p->pclk);
-	}
+	timer8_priv.mapbase = (unsigned long)base;
+	timer8_priv.pclk = clk;
 
-	p->ced.name = pdev->name;
-	p->ced.features = CLOCK_EVT_FEAT_PERIODIC |
-		CLOCK_EVT_FEAT_ONESHOT;
-	p->ced.rating = 200;
-	p->ced.cpumask = cpumask_of(0);
-	p->ced.set_next_event = timer8_clock_event_next;
-	p->ced.set_state_shutdown = timer8_clock_event_shutdown;
-	p->ced.set_state_periodic = timer8_clock_event_periodic;
-	p->ced.set_state_oneshot = timer8_clock_event_oneshot;
-
-	ret = setup_irq(irq, &p->irqaction);
+	ret = request_irq(irq, timer8_interrupt,
+			  IRQF_TIMER, timer8_priv.ced.name, &timer8_priv);
 	if (ret < 0) {
-		dev_err(&p->pdev->dev,
-			"failed to request irq %d\n", irq);
-		return ret;
+		pr_err("failed to request irq %d for clockevent\n", irq);
+		goto unmap_reg;
 	}
-	clockevents_register_device(&p->ced);
-	platform_set_drvdata(pdev, p);
-
-	return 0;
-}
-
-static int timer8_probe(struct platform_device *pdev)
-{
-	struct timer8_priv *p = platform_get_drvdata(pdev);
-
-	if (p) {
-		dev_info(&pdev->dev, "kept as earlytimer\n");
-		return 0;
-	}
-
-	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
-	if (!p)
-		return -ENOMEM;
-
-	return timer8_setup(p, pdev);
-}
-
-static int timer8_remove(struct platform_device *pdev)
-{
-	return -EBUSY;
-}
-
-static const struct of_device_id timer8_of_table[] __maybe_unused = {
-	{ .compatible = "renesas,8bit-timer" },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(of, timer8_of_table);
-static struct platform_driver timer8_driver = {
-	.probe		= timer8_probe,
-	.remove		= timer8_remove,
-	.driver		= {
-		.name	= "h8300-8timer",
-		.of_match_table = of_match_ptr(timer8_of_table),
-	}
-};
-
-static int __init timer8_init(void)
-{
-	return platform_driver_register(&timer8_driver);
-}
-
-static void __exit timer8_exit(void)
-{
-	platform_driver_unregister(&timer8_driver);
+	rate = clk_get_rate(clk) / SCALE;
+	clockevents_config_and_register(&timer8_priv.ced, rate, 1, 0x0000ffff);
+	return;
+
+unmap_reg:
+	iounmap(base);
+free_clk:
+	clk_put(clk);
 }
 
-subsys_initcall(timer8_init);
-module_exit(timer8_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8/300 8bit Timer Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_8bit, "renesas,8bit-timer", h8300_8timer_init);
diff --git a/drivers/clocksource/h8300_tpu.c b/drivers/clocksource/h8300_tpu.c
index 5487410..ed0b493 100644
--- a/drivers/clocksource/h8300_tpu.c
+++ b/drivers/clocksource/h8300_tpu.c
@@ -1,5 +1,5 @@
 /*
- *  H8/300 TPU Driver
+ *  H8S TPU Driver
  *
  *  Copyright 2015 Yoshinori Sato <ysato@users.sourcefoge.jp>
  *
@@ -17,8 +17,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/of.h>
-
-#include <asm/irq.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #define TCR	0
 #define TMDR	1
@@ -32,9 +32,7 @@
 #define TGRD	14
 
 struct tpu_priv {
-	struct platform_device *pdev;
 	struct clocksource cs;
-	struct clk *clk;
 	unsigned long mapbase1;
 	unsigned long mapbase2;
 	raw_spinlock_t lock;
@@ -116,91 +114,54 @@ static void tpu_clocksource_disable(struct clocksource *cs)
 	p->cs_enabled = false;
 }
 
+static struct tpu_priv tpu_priv = {
+	.cs = {
+		.name = "H8S_TPU",
+		.rating = 200,
+		.read = tpu_clocksource_read,
+		.enable = tpu_clocksource_enable,
+		.disable = tpu_clocksource_disable,
+		.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8),
+		.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+	},
+};
+
 #define CH_L 0
 #define CH_H 1
 
-static int __init tpu_setup(struct tpu_priv *p, struct platform_device *pdev)
+static void __init h8300_tpu_init(struct device_node *node)
 {
-	struct resource *res[2];
-
-	p->pdev = pdev;
+	void __iomem *base[2];
+	struct clk *clk;
 
-	res[CH_L] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_L);
-	res[CH_H] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_H);
-	if (!res[CH_L] || !res[CH_H]) {
-		dev_err(&p->pdev->dev, "failed to get I/O memory\n");
-		return -ENXIO;
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk)) {
+		pr_err("failed to get clock for clocksource\n");
+		return;
 	}
 
-	p->clk = clk_get(&p->pdev->dev, "fck");
-	if (IS_ERR(p->clk)) {
-		dev_err(&p->pdev->dev, "can't get clk\n");
-		return PTR_ERR(p->clk);
+	base[CH_L] = of_iomap(node, CH_L);
+	if (!base[CH_L]) {
+		pr_err("failed to map registers for clocksource\n");
+		goto free_clk;
 	}
-
-	p->mapbase1 = res[CH_L]->start;
-	p->mapbase2 = res[CH_H]->start;
-
-	p->cs.name = pdev->name;
-	p->cs.rating = 200;
-	p->cs.read = tpu_clocksource_read;
-	p->cs.enable = tpu_clocksource_enable;
-	p->cs.disable = tpu_clocksource_disable;
-	p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
-	p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
-	clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 64);
-	platform_set_drvdata(pdev, p);
-
-	return 0;
-}
-
-static int tpu_probe(struct platform_device *pdev)
-{
-	struct tpu_priv *p = platform_get_drvdata(pdev);
-
-	if (p) {
-		dev_info(&pdev->dev, "kept as earlytimer\n");
-		return 0;
+	base[CH_H] = of_iomap(node, CH_H);
+	if (!base[CH_H]) {
+		pr_err("failed to map registers for clocksource\n");
+		goto unmap_L;
 	}
 
-	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
-	if (!p)
-		return -ENOMEM;
+	tpu_priv.mapbase1 = (unsigned long)base[CH_L];
+	tpu_priv.mapbase2 = (unsigned long)base[CH_H];
 
-	return tpu_setup(p, pdev);
-}
+	clocksource_register_hz(&tpu_priv.cs, clk_get_rate(clk) / 64);
 
-static int tpu_remove(struct platform_device *pdev)
-{
-	return -EBUSY;
-}
+	return;
 
-static const struct of_device_id tpu_of_table[] = {
-	{ .compatible = "renesas,tpu" },
-	{ }
-};
-
-static struct platform_driver tpu_driver = {
-	.probe		= tpu_probe,
-	.remove		= tpu_remove,
-	.driver		= {
-		.name	= "h8s-tpu",
-		.of_match_table = of_match_ptr(tpu_of_table),
-	}
-};
-
-static int __init tpu_init(void)
-{
-	return platform_driver_register(&tpu_driver);
-}
-
-static void __exit tpu_exit(void)
-{
-	platform_driver_unregister(&tpu_driver);
+unmap_L:
+	iounmap(base[CH_H]);
+free_clk:
+	clk_put(clk);
 }
 
-subsys_initcall(tpu_init);
-module_exit(tpu_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8S Timer Pulse Unit Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_tpu, "renesas,tpu", h8300_tpu_init);
-- 
2.6.1


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* Re: [PATCH v3] h8300: cleanup startup and remove module code.
  2015-11-06 16:31     ` [PATCH v3] " Yoshinori Sato
@ 2015-11-06 16:42       ` Daniel Lezcano
  0 siblings, 0 replies; 6+ messages in thread
From: Daniel Lezcano @ 2015-11-06 16:42 UTC (permalink / raw)
  To: Yoshinori Sato, Thomas Gleixner; +Cc: linux-kernel

On 11/06/2015 05:31 PM, Yoshinori Sato wrote:
> h8300's clocksource driver update.
> Changes for v2
> - Diff base on 6ddcedf38a75f94bf662438afd7ed8c7837ab00e
>
> Changes for v1
> - Drop non-initialize changes.
> - Private data static allocation.
> - Avoid magic number.
> - Use request_irq.
>
> Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
> ---

Applied.

Thanks Yoshinori Sato !

   -- Daniel

-- 
  <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog


^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2015-11-06 16:42 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-11-04  7:35 [PATCH] h8300: Initialize cleanup and remove module code Yoshinori Sato
2015-11-04 13:49 ` Daniel Lezcano
2015-11-06  7:03 ` [PATCH v2] h8300: cleanup startup " Yoshinori Sato
2015-11-06 11:37   ` Daniel Lezcano
2015-11-06 16:31     ` [PATCH v3] " Yoshinori Sato
2015-11-06 16:42       ` Daniel Lezcano

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.