All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH V2 4/4] arch: mips: lantiq: disable xbar fpi burst mode
@ 2015-11-05  2:56 John Crispin
  0 siblings, 0 replies; only message in thread
From: John Crispin @ 2015-11-05  2:56 UTC (permalink / raw)
  To: Ralf Baechle; +Cc: linux-mips

Signed-off-by: John Crispin <blogic@openwrt.org>
---
Changes in V2:
* fix some whitespace/indentation breakage.

 arch/mips/lantiq/xway/sysctrl.c |   41 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
index 2b15491..5c66d7b 100644
--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -78,7 +78,15 @@
 #define pmu_w32(x, y)	ltq_w32((x), pmu_membase + (y))
 #define pmu_r32(x)	ltq_r32(pmu_membase + (x))
 
+#define XBAR_ALWAYS_LAST	0x430
+#define XBAR_FPI_BURST_EN	BIT(1)
+#define XBAR_AHB_BURST_EN	BIT(2)
+
+#define xbar_w32(x, y)	ltq_w32((x), ltq_xbar_membase + (y))
+#define xbar_r32(x)	ltq_r32(ltq_xbar_membase + (x))
+
 static void __iomem *pmu_membase;
+static void __iomem *ltq_xbar_membase;
 void __iomem *ltq_cgu_membase;
 void __iomem *ltq_ebu_membase;
 
@@ -179,6 +187,16 @@ static void pci_ext_disable(struct clk *clk)
 	ltq_cgu_w32((1 << 31) | (1 << 30), pcicr);
 }
 
+static void xbar_fpi_burst_disable(void)
+{
+	u32 reg;
+
+	/* bit 1 as 1 --burst; bit 1 as 0 -- single */
+	reg = xbar_r32(XBAR_ALWAYS_LAST);
+	reg &= ~XBAR_FPI_BURST_EN;
+	xbar_w32(reg, XBAR_ALWAYS_LAST);
+}
+
 /* enable a clockout source */
 static int clkout_enable(struct clk *clk)
 {
@@ -328,6 +346,26 @@ void __init ltq_soc_init(void)
 	if (!pmu_membase || !ltq_cgu_membase || !ltq_ebu_membase)
 		panic("Failed to remap core resources");
 
+	if (of_machine_is_compatible("lantiq,vr9")) {
+		struct resource res_xbar;
+		struct device_node *np_xbar =
+				of_find_compatible_node(NULL, NULL,
+							"lantiq,xbar-xway");
+
+		if (!np_xbar)
+			panic("Failed to load xbar nodes from devicetree");
+		if (of_address_to_resource(np_pmu, 0, &res_xbar))
+			panic("Failed to get xbar resources");
+		if (request_mem_region(res_xbar.start, resource_size(&res_xbar),
+			res_xbar.name) < 0)
+			panic("Failed to get xbar resources");
+
+		ltq_xbar_membase = ioremap_nocache(res_xbar.start,
+						   resource_size(&res_xbar));
+		if (!ltq_xbar_membase)
+			panic("Failed to remap xbar resources");
+	}
+
 	/* make sure to unprotect the memory region where flash is located */
 	ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0);
 
@@ -385,4 +423,7 @@ void __init ltq_soc_init(void)
 		clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
 				ltq_danube_fpi_hz(), ltq_danube_pp32_hz());
 	}
+
+	if (of_machine_is_compatible("lantiq,vr9"))
+		xbar_fpi_burst_disable();
 }
-- 
1.7.10.4

^ permalink raw reply related	[flat|nested] only message in thread

only message in thread, other threads:[~2015-11-05 13:35 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-11-05  2:56 [PATCH V2 4/4] arch: mips: lantiq: disable xbar fpi burst mode John Crispin

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.