* [U-Boot] [PATCH 1/2] nios2: rename board nios2-generic to 3c120_devboard
@ 2015-11-10 12:37 Thomas Chou
2015-11-10 12:37 ` [U-Boot] [PATCH 2/2] nios2: add 3c120 and 10m50 devboards MAINTAINERS Thomas Chou
` (3 more replies)
0 siblings, 4 replies; 18+ messages in thread
From: Thomas Chou @ 2015-11-10 12:37 UTC (permalink / raw)
To: u-boot
Rename board nios2-generic to 3c120_devboard. Since nios2 is
converted to driver model and device tree control of u-boot,
the nios2-generic board directory is removed. We can rename
the board back to a real board name. Now the boards maintained
in u-boot mainline are the same as Linux kernel, namely 3c120
and 10m50.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
---
configs/3c120_defconfig | 27 ++++++++++
configs/nios2-generic_defconfig | 27 ----------
doc/README.nios2 | 8 +--
include/configs/3c120_devboard.h | 107 +++++++++++++++++++++++++++++++++++++++
include/configs/nios2-generic.h | 107 ---------------------------------------
5 files changed, 138 insertions(+), 138 deletions(-)
create mode 100644 configs/3c120_defconfig
delete mode 100644 configs/nios2-generic_defconfig
create mode 100644 include/configs/3c120_devboard.h
delete mode 100644 include/configs/nios2-generic.h
diff --git a/configs/3c120_defconfig b/configs/3c120_defconfig
new file mode 100644
index 0000000..736119e
--- /dev/null
+++ b/configs/3c120_defconfig
@@ -0,0 +1,27 @@
+CONFIG_NIOS2=y
+CONFIG_SYS_CONFIG_NAME="3c120_devboard"
+CONFIG_DM_SERIAL=y
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="3c120_devboard"
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_CPU=y
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_CMD_ITEST is not set
+CONFIG_CMD_DHCP=y
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_PING=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_ALTERA_PIO=y
+CONFIG_MISC=y
+CONFIG_ALTERA_SYSID=y
+CONFIG_MTD=y
+CONFIG_CFI_FLASH=y
+CONFIG_DM_ETH=y
+CONFIG_ALTERA_TSE=y
+CONFIG_ALTERA_JTAG_UART=y
+CONFIG_ALTERA_JTAG_UART_BYPASS=y
+CONFIG_TIMER=y
+CONFIG_ALTERA_TIMER=y
diff --git a/configs/nios2-generic_defconfig b/configs/nios2-generic_defconfig
deleted file mode 100644
index 0a6de6f..0000000
--- a/configs/nios2-generic_defconfig
+++ /dev/null
@@ -1,27 +0,0 @@
-CONFIG_NIOS2=y
-CONFIG_SYS_CONFIG_NAME="nios2-generic"
-CONFIG_DM_SERIAL=y
-CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="3c120_devboard"
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_CPU=y
-# CONFIG_CMD_BOOTD is not set
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_ITEST is not set
-CONFIG_CMD_DHCP=y
-# CONFIG_CMD_NFS is not set
-CONFIG_CMD_PING=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_ALTERA_PIO=y
-CONFIG_MISC=y
-CONFIG_ALTERA_SYSID=y
-CONFIG_MTD=y
-CONFIG_CFI_FLASH=y
-CONFIG_DM_ETH=y
-CONFIG_ALTERA_TSE=y
-CONFIG_ALTERA_JTAG_UART=y
-CONFIG_ALTERA_JTAG_UART_BYPASS=y
-CONFIG_TIMER=y
-CONFIG_ALTERA_TIMER=y
diff --git a/doc/README.nios2 b/doc/README.nios2
index 2dab7d1..a33c4e8 100644
--- a/doc/README.nios2
+++ b/doc/README.nios2
@@ -45,9 +45,9 @@ the sequence of these devices, like this,
};
Next, you will need a default config file. You may start with
-nios2-generic_defconfig, modify the options and save it.
+3c120_defconfig, modify the options and save it.
-$ make nios2-generic_defconfig
+$ make 3c120_defconfig
$ make menuconfig
$ make savedefconfig
$ cp defconfig configs/mysystem_defconfig
@@ -72,9 +72,9 @@ copies all the u-boot-dtb.bin, not just u-boot.bin.
binary. This is handy for development, eg, using gdb or nios2-download.
The last thing, legacy board header file describes those config options
-not covered in Kconfig yet. You may copy it from nios2-generic.h.
+not covered in Kconfig yet. You may copy it from 3c120_devboard.h.
-$ cp include/configs/nios2-generic.h include/configs/mysystem.h
+$ cp include/configs/3c120_devboard.h include/configs/mysystem.h
Please change the SDRAM base and size to match your board. The base
should be cached virtual address, for Nios II with MMU it is 0xCxxx_xxxx
diff --git a/include/configs/3c120_devboard.h b/include/configs/3c120_devboard.h
new file mode 100644
index 0000000..856c836
--- /dev/null
+++ b/include/configs/3c120_devboard.h
@@ -0,0 +1,107 @@
+/*
+ * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ * (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * BOARD/CPU
+ */
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+
+/*
+ * SERIAL
+ */
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_CONSOLE_INFO_QUIET /* Suppress console info */
+
+/*
+ * CFI Flash
+ */
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* fix amd flash issue */
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
+#define CONFIG_SYS_MAX_FLASH_SECT 512
+
+/*
+ * NET options
+ */
+#define CONFIG_SYS_RX_ETH_BUFFER 0
+#define CONFIG_CMD_MII
+#define CONFIG_PHY_GIGE
+#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#define CONFIG_PHY_MARVELL
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * FDT options
+ */
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_LMB
+
+/*
+ * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
+ * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
+ * reset address, no? This will keep the environment in user region
+ * of flash. NOTE: the monitor length must be multiple of sector size
+ * (which is common practice).
+ */
+#define CONFIG_ENV_IS_IN_FLASH
+
+#define CONFIG_ENV_SIZE 0x20000 /* 128k, 1 sector */
+#define CONFIG_ENV_OVERWRITE /* Serial change Ok */
+#define CONFIG_ENV_ADDR 0xe2840000
+
+/*
+ * MEMORY ORGANIZATION
+ * -Monitor at top of sdram.
+ * -The heap is placed below the monitor
+ * -The stack is placed below the heap (&grows down).
+ */
+#define CONFIG_SYS_SDRAM_BASE 0xD0000000
+#define CONFIG_SYS_SDRAM_SIZE 0x08000000
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_MONITOR_IS_IN_RAM
+#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256k */
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \
+ CONFIG_SYS_SDRAM_SIZE - \
+ CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_MALLOC_LEN 0x20000
+
+/*
+ * MISC
+ */
+#define CONFIG_SYS_LONGHELP /* Provide extended help */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */
+#define CONFIG_SYS_MAXARGS 16 /* Max command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Bootarg buf size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + \
+ 16) /* Print buf size */
+#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MONITOR_BASE - \
+ CONFIG_ENV_SIZE - \
+ CONFIG_SYS_MALLOC_LEN - \
+ 0x10000)
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_CMD_GPIO
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/nios2-generic.h b/include/configs/nios2-generic.h
deleted file mode 100644
index 856c836..0000000
--- a/include/configs/nios2-generic.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- * (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * BOARD/CPU
- */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO_LATE
-
-/*
- * SERIAL
- */
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_CONSOLE_INFO_QUIET /* Suppress console info */
-
-/*
- * CFI Flash
- */
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* fix amd flash issue */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-#define CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
-#define CONFIG_SYS_MAX_FLASH_SECT 512
-
-/*
- * NET options
- */
-#define CONFIG_SYS_RX_ETH_BUFFER 0
-#define CONFIG_CMD_MII
-#define CONFIG_PHY_GIGE
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#define CONFIG_PHY_MARVELL
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * FDT options
- */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_LMB
-
-/*
- * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
- * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
- * reset address, no? This will keep the environment in user region
- * of flash. NOTE: the monitor length must be multiple of sector size
- * (which is common practice).
- */
-#define CONFIG_ENV_IS_IN_FLASH
-
-#define CONFIG_ENV_SIZE 0x20000 /* 128k, 1 sector */
-#define CONFIG_ENV_OVERWRITE /* Serial change Ok */
-#define CONFIG_ENV_ADDR 0xe2840000
-
-/*
- * MEMORY ORGANIZATION
- * -Monitor at top of sdram.
- * -The heap is placed below the monitor
- * -The stack is placed below the heap (&grows down).
- */
-#define CONFIG_SYS_SDRAM_BASE 0xD0000000
-#define CONFIG_SYS_SDRAM_SIZE 0x08000000
-#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256k */
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \
- CONFIG_SYS_SDRAM_SIZE - \
- CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_MALLOC_LEN 0x20000
-
-/*
- * MISC
- */
-#define CONFIG_SYS_LONGHELP /* Provide extended help */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */
-#define CONFIG_SYS_MAXARGS 16 /* Max command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Bootarg buf size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + \
- 16) /* Print buf size */
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MONITOR_BASE - \
- CONFIG_ENV_SIZE - \
- CONFIG_SYS_MALLOC_LEN - \
- 0x10000)
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_CMD_GPIO
-
-#endif /* __CONFIG_H */
--
2.5.0
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH 2/2] nios2: add 3c120 and 10m50 devboards MAINTAINERS
2015-11-10 12:37 [U-Boot] [PATCH 1/2] nios2: rename board nios2-generic to 3c120_devboard Thomas Chou
@ 2015-11-10 12:37 ` Thomas Chou
2015-11-10 13:47 ` [U-Boot] [PATCH 1/2] nios2: rename board nios2-generic to 3c120_devboard Marek Vasut
` (2 subsequent siblings)
3 siblings, 0 replies; 18+ messages in thread
From: Thomas Chou @ 2015-11-10 12:37 UTC (permalink / raw)
To: u-boot
Add 3c120 and 10m50 devboards MAINTAINERS
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
---
board/altera/nios2/MAINTAINERS | 13 +++++++++++++
1 file changed, 13 insertions(+)
create mode 100644 board/altera/nios2/MAINTAINERS
diff --git a/board/altera/nios2/MAINTAINERS b/board/altera/nios2/MAINTAINERS
new file mode 100644
index 0000000..aff618b
--- /dev/null
+++ b/board/altera/nios2/MAINTAINERS
@@ -0,0 +1,13 @@
+3C120 DEVBOARD
+M: Thomas Chou <thomas@wytron.com.tw>
+S: Maintained
+F: arch/nios2/dts/3c120_devboard.dts
+F: configs/3c120_defconfig
+F: include/configs/3c120_devboard.h
+
+10M50 DEVBOARD
+M: Thomas Chou <thomas@wytron.com.tw>
+S: Maintained
+F: arch/nios2/dts/10m50_devboard.dts
+F: configs/10m50_defconfig
+F: include/configs/10m50_devboard.h
--
2.5.0
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH 1/2] nios2: rename board nios2-generic to 3c120_devboard
2015-11-10 12:37 [U-Boot] [PATCH 1/2] nios2: rename board nios2-generic to 3c120_devboard Thomas Chou
2015-11-10 12:37 ` [U-Boot] [PATCH 2/2] nios2: add 3c120 and 10m50 devboards MAINTAINERS Thomas Chou
@ 2015-11-10 13:47 ` Marek Vasut
2015-11-10 14:48 ` [U-Boot] [PATCH v2 " Thomas Chou
2015-11-11 0:06 ` [U-Boot] [PATCH v3 1/3] " Thomas Chou
3 siblings, 0 replies; 18+ messages in thread
From: Marek Vasut @ 2015-11-10 13:47 UTC (permalink / raw)
To: u-boot
On Tuesday, November 10, 2015 at 01:37:36 PM, Thomas Chou wrote:
> Rename board nios2-generic to 3c120_devboard. Since nios2 is
> converted to driver model and device tree control of u-boot,
> the nios2-generic board directory is removed. We can rename
> the board back to a real board name. Now the boards maintained
> in u-boot mainline are the same as Linux kernel, namely 3c120
> and 10m50.
>
> Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
> ---
Next time, try git format-patch -M -C , this will generate much more
reviewable patch.
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v2 1/2] nios2: rename board nios2-generic to 3c120_devboard
2015-11-10 12:37 [U-Boot] [PATCH 1/2] nios2: rename board nios2-generic to 3c120_devboard Thomas Chou
2015-11-10 12:37 ` [U-Boot] [PATCH 2/2] nios2: add 3c120 and 10m50 devboards MAINTAINERS Thomas Chou
2015-11-10 13:47 ` [U-Boot] [PATCH 1/2] nios2: rename board nios2-generic to 3c120_devboard Marek Vasut
@ 2015-11-10 14:48 ` Thomas Chou
2015-11-10 14:48 ` [U-Boot] [PATCH v2 2/2] nios2: add 3c120 and 10m50 devboards MAINTAINERS Thomas Chou
2015-11-10 14:52 ` [U-Boot] [PATCH v2 1/2] nios2: rename board nios2-generic to 3c120_devboard Marek Vasut
2015-11-11 0:06 ` [U-Boot] [PATCH v3 1/3] " Thomas Chou
3 siblings, 2 replies; 18+ messages in thread
From: Thomas Chou @ 2015-11-10 14:48 UTC (permalink / raw)
To: u-boot
Rename board nios2-generic to 3c120_devboard. Since nios2 is
converted to driver model and device tree control of u-boot,
the nios2-generic board directory is removed. We can rename
the board back to a real board name. Now the boards maintained
in u-boot mainline are the same as Linux kernel, namely 3c120
and 10m50.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
---
v2
use git format-patch -M -C as suggested by Marek.
configs/{nios2-generic_defconfig => 3c120_defconfig} | 2 +-
doc/README.nios2 | 8 ++++----
include/configs/{nios2-generic.h => 3c120_devboard.h} | 0
3 files changed, 5 insertions(+), 5 deletions(-)
rename configs/{nios2-generic_defconfig => 3c120_defconfig} (93%)
rename include/configs/{nios2-generic.h => 3c120_devboard.h} (100%)
diff --git a/configs/nios2-generic_defconfig b/configs/3c120_defconfig
similarity index 93%
rename from configs/nios2-generic_defconfig
rename to configs/3c120_defconfig
index 0a6de6f..736119e 100644
--- a/configs/nios2-generic_defconfig
+++ b/configs/3c120_defconfig
@@ -1,5 +1,5 @@
CONFIG_NIOS2=y
-CONFIG_SYS_CONFIG_NAME="nios2-generic"
+CONFIG_SYS_CONFIG_NAME="3c120_devboard"
CONFIG_DM_SERIAL=y
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="3c120_devboard"
diff --git a/doc/README.nios2 b/doc/README.nios2
index 2dab7d1..a33c4e8 100644
--- a/doc/README.nios2
+++ b/doc/README.nios2
@@ -45,9 +45,9 @@ the sequence of these devices, like this,
};
Next, you will need a default config file. You may start with
-nios2-generic_defconfig, modify the options and save it.
+3c120_defconfig, modify the options and save it.
-$ make nios2-generic_defconfig
+$ make 3c120_defconfig
$ make menuconfig
$ make savedefconfig
$ cp defconfig configs/mysystem_defconfig
@@ -72,9 +72,9 @@ copies all the u-boot-dtb.bin, not just u-boot.bin.
binary. This is handy for development, eg, using gdb or nios2-download.
The last thing, legacy board header file describes those config options
-not covered in Kconfig yet. You may copy it from nios2-generic.h.
+not covered in Kconfig yet. You may copy it from 3c120_devboard.h.
-$ cp include/configs/nios2-generic.h include/configs/mysystem.h
+$ cp include/configs/3c120_devboard.h include/configs/mysystem.h
Please change the SDRAM base and size to match your board. The base
should be cached virtual address, for Nios II with MMU it is 0xCxxx_xxxx
diff --git a/include/configs/nios2-generic.h b/include/configs/3c120_devboard.h
similarity index 100%
rename from include/configs/nios2-generic.h
rename to include/configs/3c120_devboard.h
--
2.5.0
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v2 2/2] nios2: add 3c120 and 10m50 devboards MAINTAINERS
2015-11-10 14:48 ` [U-Boot] [PATCH v2 " Thomas Chou
@ 2015-11-10 14:48 ` Thomas Chou
2015-11-10 14:52 ` [U-Boot] [PATCH v2 1/2] nios2: rename board nios2-generic to 3c120_devboard Marek Vasut
1 sibling, 0 replies; 18+ messages in thread
From: Thomas Chou @ 2015-11-10 14:48 UTC (permalink / raw)
To: u-boot
Add 3c120 and 10m50 devboards MAINTAINERS
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
---
board/altera/nios2/MAINTAINERS | 13 +++++++++++++
1 file changed, 13 insertions(+)
create mode 100644 board/altera/nios2/MAINTAINERS
diff --git a/board/altera/nios2/MAINTAINERS b/board/altera/nios2/MAINTAINERS
new file mode 100644
index 0000000..aff618b
--- /dev/null
+++ b/board/altera/nios2/MAINTAINERS
@@ -0,0 +1,13 @@
+3C120 DEVBOARD
+M: Thomas Chou <thomas@wytron.com.tw>
+S: Maintained
+F: arch/nios2/dts/3c120_devboard.dts
+F: configs/3c120_defconfig
+F: include/configs/3c120_devboard.h
+
+10M50 DEVBOARD
+M: Thomas Chou <thomas@wytron.com.tw>
+S: Maintained
+F: arch/nios2/dts/10m50_devboard.dts
+F: configs/10m50_defconfig
+F: include/configs/10m50_devboard.h
--
2.5.0
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v2 1/2] nios2: rename board nios2-generic to 3c120_devboard
2015-11-10 14:48 ` [U-Boot] [PATCH v2 " Thomas Chou
2015-11-10 14:48 ` [U-Boot] [PATCH v2 2/2] nios2: add 3c120 and 10m50 devboards MAINTAINERS Thomas Chou
@ 2015-11-10 14:52 ` Marek Vasut
1 sibling, 0 replies; 18+ messages in thread
From: Marek Vasut @ 2015-11-10 14:52 UTC (permalink / raw)
To: u-boot
On Tuesday, November 10, 2015 at 03:48:40 PM, Thomas Chou wrote:
> Rename board nios2-generic to 3c120_devboard. Since nios2 is
> converted to driver model and device tree control of u-boot,
> the nios2-generic board directory is removed. We can rename
> the board back to a real board name. Now the boards maintained
> in u-boot mainline are the same as Linux kernel, namely 3c120
> and 10m50.
>
> Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
> ---
> v2
> use git format-patch -M -C as suggested by Marek.
Heh, much better :-)
Obviously,
Reviewed-by: Marek Vasut <marex@denx.de>
Thanks!
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v3 1/3] nios2: rename board nios2-generic to 3c120_devboard
2015-11-10 12:37 [U-Boot] [PATCH 1/2] nios2: rename board nios2-generic to 3c120_devboard Thomas Chou
` (2 preceding siblings ...)
2015-11-10 14:48 ` [U-Boot] [PATCH v2 " Thomas Chou
@ 2015-11-11 0:06 ` Thomas Chou
2015-11-11 0:06 ` [U-Boot] [PATCH v3 2/3] nios2: change README.nios2 to use 10m50 as template Thomas Chou
2015-11-11 0:06 ` [U-Boot] [PATCH v3 3/3] nios2: add 3c120 and 10m50 devboards MAINTAINERS Thomas Chou
3 siblings, 2 replies; 18+ messages in thread
From: Thomas Chou @ 2015-11-11 0:06 UTC (permalink / raw)
To: u-boot
Rename board nios2-generic to 3c120_devboard. Since nios2 is
converted to driver model and device tree control of u-boot,
the nios2-generic board directory is removed. We can rename
the board back to a real board name. Now the boards maintained
in u-boot mainline are the same as Linux kernel, namely 3c120
and 10m50.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Marek Vasut <marex@denx.de>
---
v2
use git format-patch -M -C as suggested by Marek.
v3
split README.nios2 to another patch.
configs/{nios2-generic_defconfig => 3c120_defconfig} | 2 +-
include/configs/{nios2-generic.h => 3c120_devboard.h} | 0
2 files changed, 1 insertion(+), 1 deletion(-)
rename configs/{nios2-generic_defconfig => 3c120_defconfig} (93%)
rename include/configs/{nios2-generic.h => 3c120_devboard.h} (100%)
diff --git a/configs/nios2-generic_defconfig b/configs/3c120_defconfig
similarity index 93%
rename from configs/nios2-generic_defconfig
rename to configs/3c120_defconfig
index 0a6de6f..736119e 100644
--- a/configs/nios2-generic_defconfig
+++ b/configs/3c120_defconfig
@@ -1,5 +1,5 @@
CONFIG_NIOS2=y
-CONFIG_SYS_CONFIG_NAME="nios2-generic"
+CONFIG_SYS_CONFIG_NAME="3c120_devboard"
CONFIG_DM_SERIAL=y
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="3c120_devboard"
diff --git a/include/configs/nios2-generic.h b/include/configs/3c120_devboard.h
similarity index 100%
rename from include/configs/nios2-generic.h
rename to include/configs/3c120_devboard.h
--
2.5.0
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v3 2/3] nios2: change README.nios2 to use 10m50 as template
2015-11-11 0:06 ` [U-Boot] [PATCH v3 1/3] " Thomas Chou
@ 2015-11-11 0:06 ` Thomas Chou
2015-11-11 0:06 ` [U-Boot] [PATCH v3 3/3] nios2: add 3c120 and 10m50 devboards MAINTAINERS Thomas Chou
1 sibling, 0 replies; 18+ messages in thread
From: Thomas Chou @ 2015-11-11 0:06 UTC (permalink / raw)
To: u-boot
The 10m50 devboard becomes the new golden reference design of
Nios II Linux. So change README.nios2 to use 10m50 as template.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
---
v3
use 10m50 as template.
doc/README.nios2 | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/doc/README.nios2 b/doc/README.nios2
index 2dab7d1..46c704e 100644
--- a/doc/README.nios2
+++ b/doc/README.nios2
@@ -30,12 +30,12 @@ http://www.alterawiki.com/wiki/Sopc2dts
$ java -jar sopc2dts.jar --force-altr -i mysystem.sopcinfo -o mysystem.dts
You will need to add additional properties to the dts. Please find an
-example at, arch/nios2/dts/3c120_devboard.dts.
+example at, arch/nios2/dts/10m50_devboard.dts.
1. Add "stdout-path=..." property with your serial path to the chosen
node, like this,
chosen {
- stdout-path = &jtag_uart;
+ stdout-path = &uart_0;
};
2. If you use SPI/EPCS or I2C, you will need to add aliases to number
@@ -45,9 +45,9 @@ the sequence of these devices, like this,
};
Next, you will need a default config file. You may start with
-nios2-generic_defconfig, modify the options and save it.
+10m50_defconfig, modify the options and save it.
-$ make nios2-generic_defconfig
+$ make 10m50_defconfig
$ make menuconfig
$ make savedefconfig
$ cp defconfig configs/mysystem_defconfig
@@ -72,15 +72,15 @@ copies all the u-boot-dtb.bin, not just u-boot.bin.
binary. This is handy for development, eg, using gdb or nios2-download.
The last thing, legacy board header file describes those config options
-not covered in Kconfig yet. You may copy it from nios2-generic.h.
+not covered in Kconfig yet. You may copy it from 10m50_devboard.h.
-$ cp include/configs/nios2-generic.h include/configs/mysystem.h
+$ cp include/configs/10m50_devboard.h include/configs/mysystem.h
Please change the SDRAM base and size to match your board. The base
should be cached virtual address, for Nios II with MMU it is 0xCxxx_xxxx
to 0xDxxx_xxxx.
-#define CONFIG_SYS_SDRAM_BASE 0xD0000000
+#define CONFIG_SYS_SDRAM_BASE 0xc8000000
#define CONFIG_SYS_SDRAM_SIZE 0x08000000
You will need to change the environment variables location and setting,
--
2.5.0
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v3 3/3] nios2: add 3c120 and 10m50 devboards MAINTAINERS
2015-11-11 0:06 ` [U-Boot] [PATCH v3 1/3] " Thomas Chou
2015-11-11 0:06 ` [U-Boot] [PATCH v3 2/3] nios2: change README.nios2 to use 10m50 as template Thomas Chou
@ 2015-11-11 0:06 ` Thomas Chou
2015-11-11 0:27 ` Marek Vasut
1 sibling, 1 reply; 18+ messages in thread
From: Thomas Chou @ 2015-11-11 0:06 UTC (permalink / raw)
To: u-boot
Add 3c120 and 10m50 devboards MAINTAINERS
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
---
board/altera/nios2/MAINTAINERS | 13 +++++++++++++
1 file changed, 13 insertions(+)
create mode 100644 board/altera/nios2/MAINTAINERS
diff --git a/board/altera/nios2/MAINTAINERS b/board/altera/nios2/MAINTAINERS
new file mode 100644
index 0000000..aff618b
--- /dev/null
+++ b/board/altera/nios2/MAINTAINERS
@@ -0,0 +1,13 @@
+3C120 DEVBOARD
+M: Thomas Chou <thomas@wytron.com.tw>
+S: Maintained
+F: arch/nios2/dts/3c120_devboard.dts
+F: configs/3c120_defconfig
+F: include/configs/3c120_devboard.h
+
+10M50 DEVBOARD
+M: Thomas Chou <thomas@wytron.com.tw>
+S: Maintained
+F: arch/nios2/dts/10m50_devboard.dts
+F: configs/10m50_defconfig
+F: include/configs/10m50_devboard.h
--
2.5.0
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v3 3/3] nios2: add 3c120 and 10m50 devboards MAINTAINERS
2015-11-11 0:06 ` [U-Boot] [PATCH v3 3/3] nios2: add 3c120 and 10m50 devboards MAINTAINERS Thomas Chou
@ 2015-11-11 0:27 ` Marek Vasut
2015-11-11 1:18 ` Thomas Chou
0 siblings, 1 reply; 18+ messages in thread
From: Marek Vasut @ 2015-11-11 0:27 UTC (permalink / raw)
To: u-boot
On Wednesday, November 11, 2015 at 01:06:15 AM, Thomas Chou wrote:
> Add 3c120 and 10m50 devboards MAINTAINERS
>
> Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
All is good with this series.
Acked-by: Marek Vasut <marex@denx.de>
And thanks for all your good work, it's amazing!
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v3 3/3] nios2: add 3c120 and 10m50 devboards MAINTAINERS
2015-11-11 0:27 ` Marek Vasut
@ 2015-11-11 1:18 ` Thomas Chou
2015-11-11 1:41 ` Marek Vasut
2015-11-11 1:48 ` Thomas Chou
0 siblings, 2 replies; 18+ messages in thread
From: Thomas Chou @ 2015-11-11 1:18 UTC (permalink / raw)
To: u-boot
Hi Marek,
On 2015?11?11? 08:27, Marek Vasut wrote:
> On Wednesday, November 11, 2015 at 01:06:15 AM, Thomas Chou wrote:
>> Add 3c120 and 10m50 devboards MAINTAINERS
>>
>> Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
>
> All is good with this series.
>
> Acked-by: Marek Vasut <marex@denx.de>
>
> And thanks for all your good work, it's amazing!
>
> Best regards,
> Marek Vasut
>
Thanks a lot for your constant help and reviews, too. The work on nios2
for the v2016.01 release is almost done. I will send a PR to Tom tomorrow.
Now is the fun time for buildman. I fetched some toolchains with
buildman, and realized that it is better to copy the toolchains from the
download directory to somewhere like /toolchains, eg,
$ mv /home/sjg/.buildman-toolchains/gcc-4.5.1-nolibc/or32-linux /toolchains/
so that they can be detected correctly later.
I still miss some toolchains, like bfin. I can not find them on the
internet. I will need to search my old HDDs. However, most others works.
Do you have better results?
List of available toolchains (35):
aarch64 : /toolchains/aarch64-linux/bin/aarch64-linux-gcc
alpha : /toolchains/alpha-linux/bin/alpha-linux-gcc
am33_2.0 : /toolchains/am33_2.0-linux/bin/am33_2.0-linux-gcc
arm :
/toolchains/arm-unknown-linux-gnueabi/bin/arm-unknown-linux-gnueabi-gcc
avr : /usr/bin/avr-gcc
avr32 : /toolchains/avr32-linux/bin/avr32-linux-gcc
bfin : /toolchains/bfin-uclinux/bin/bfin-uclinux-gcc
c89 : /usr/bin/c89-gcc
c99 : /usr/bin/c99-gcc
cris : /toolchains/cris-linux/bin/cris-linux-gcc
crisv32 : /toolchains/crisv32-linux/bin/crisv32-linux-gcc
frv : /toolchains/frv-linux/bin/frv-linux-gcc
h8300 : /toolchains/h8300-elf/bin/h8300-elf-gcc
hppa : /toolchains/hppa-linux/bin/hppa-linux-gcc
hppa64 : /toolchains/hppa64-linux/bin/hppa64-linux-gcc
i386 : /toolchains/i386-linux/bin/i386-linux-gcc
ia64 : /toolchains/ia64-linux/bin/ia64-linux-gcc
m32r : /toolchains/m32r-linux/bin/m32r-linux-gcc
m68k : /toolchains/m68k-linux/bin/m68k-linux-gcc
microblaze: /toolchains/microblaze-linux/bin/microblaze-linux-gcc
mips : /toolchains/mips-linux/bin/mips-linux-gcc
mips64 : /toolchains/mips64-linux/bin/mips64-linux-gcc
nds32le : /toolchains/nds32le-linux-glibc-v1/bin/nds32le-linux-gcc
nios2 : /opt/sourceryg++-2015.05/bin/nios2-linux-gnu-gcc
or32 : /toolchains/or32-linux/bin/or32-linux-gcc
powerpc : /toolchains/powerpc-linux/bin/powerpc-linux-gcc
powerpc64 : /toolchains/powerpc64-linux/bin/powerpc64-linux-gcc
ppc64le : /toolchains/ppc64le-linux/bin/ppc64le-linux-gcc
s390x : /toolchains/s390x-linux/bin/s390x-linux-gcc
sandbox : /usr/bin/gcc
sh4 : /toolchains/sh4-linux/bin/sh4-linux-gcc
sparc : /toolchains/sparc-linux/bin/sparc-linux-gcc
sparc64 : /toolchains/sparc64-linux/bin/sparc64-linux-gcc
tilegx : /toolchains/tilegx-linux/bin/tilegx-linux-gcc
x86_64 : /usr/bin/x86_64-linux-gnu-gcc
$ ./tools/buildman/buildman -b master -s
boards.cfg is up to date. Nothing to do.
Summary of 15 commits for 1067 boards (8 threads, 1 job per thread)
01: ARM64: zynqmp: Sync zynq_sdhci_init() declaration
blackfin: + cm-bf561 blackstamp bf537-minotaur bct-brettl2
cm-bf527 bf506f-ezkit ip04 bf527-sdp pr1 bf609-ezkit bf537-stamp
bf527-ezkit-v2 cm-bf537e tcm-bf518 cm-bf537u bf527-ezkit cm-bf533
bf533-ezkit ibf-dsp561 bf537-pnav bf537-srv1 cm-bf548 bf538f-ezkit
bf548-ezkit bf525-ucr2 blackvme tcm-bf537 bf533-stamp bf518f-ezbrd
bf527-ad7160-eval bf526-ezbrd bf561-ezkit br4
aarch64: + hikey xilinx_zynqmp_ep
avr32: + atngw100mkii grasshopper atstk1002 atngw100
powerpc: + TQM834x katmai
sandbox: + sandbox
sh: + sh7753evb rsk7269 rsk7264 shmin ms7720se mpr2
sh7785lcr_32bit sh7785lcr rsk7203
nios2: + 10m50 3c120
arm: + chromebook_jerry firefly-rk3288 x600
Best regards,
Thomas
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v3 3/3] nios2: add 3c120 and 10m50 devboards MAINTAINERS
2015-11-11 1:18 ` Thomas Chou
@ 2015-11-11 1:41 ` Marek Vasut
2015-11-11 2:55 ` Thomas Chou
2015-11-11 1:48 ` Thomas Chou
1 sibling, 1 reply; 18+ messages in thread
From: Marek Vasut @ 2015-11-11 1:41 UTC (permalink / raw)
To: u-boot
On Wednesday, November 11, 2015 at 02:18:26 AM, Thomas Chou wrote:
> Hi Marek,
Hi!
> On 2015?11?11? 08:27, Marek Vasut wrote:
> > On Wednesday, November 11, 2015 at 01:06:15 AM, Thomas Chou wrote:
> >> Add 3c120 and 10m50 devboards MAINTAINERS
> >>
> >> Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
> >
> > All is good with this series.
> >
> > Acked-by: Marek Vasut <marex@denx.de>
> >
> > And thanks for all your good work, it's amazing!
> >
> > Best regards,
> > Marek Vasut
>
> Thanks a lot for your constant help and reviews, too. The work on nios2
> for the v2016.01 release is almost done. I will send a PR to Tom tomorrow.
Cool!
> Now is the fun time for buildman. I fetched some toolchains with
> buildman, and realized that it is better to copy the toolchains from the
> download directory to somewhere like /toolchains, eg,
>
> $ mv /home/sjg/.buildman-toolchains/gcc-4.5.1-nolibc/or32-linux
> /toolchains/
>
> so that they can be detected correctly later.
>
> I still miss some toolchains, like bfin. I can not find them on the
> internet. I will need to search my old HDDs. However, most others works.
> Do you have better results?
I gave up on buildman. I want some builder where I can stop the builds if
something goes wrong, but instead of this, buildman spawns multiple processes
somewhere on my machine at random and I have no control over that. I'd like
to reevaluate buildman eventually, but now I don't have the time or interest
to dig in it.
> List of available toolchains (35):
> aarch64 : /toolchains/aarch64-linux/bin/aarch64-linux-gcc
> alpha : /toolchains/alpha-linux/bin/alpha-linux-gcc
> am33_2.0 : /toolchains/am33_2.0-linux/bin/am33_2.0-linux-gcc
> arm :
> /toolchains/arm-unknown-linux-gnueabi/bin/arm-unknown-linux-gnueabi-gcc
> avr : /usr/bin/avr-gcc
> avr32 : /toolchains/avr32-linux/bin/avr32-linux-gcc
> bfin : /toolchains/bfin-uclinux/bin/bfin-uclinux-gcc
> c89 : /usr/bin/c89-gcc
> c99 : /usr/bin/c99-gcc
> cris : /toolchains/cris-linux/bin/cris-linux-gcc
> crisv32 : /toolchains/crisv32-linux/bin/crisv32-linux-gcc
> frv : /toolchains/frv-linux/bin/frv-linux-gcc
> h8300 : /toolchains/h8300-elf/bin/h8300-elf-gcc
> hppa : /toolchains/hppa-linux/bin/hppa-linux-gcc
> hppa64 : /toolchains/hppa64-linux/bin/hppa64-linux-gcc
> i386 : /toolchains/i386-linux/bin/i386-linux-gcc
> ia64 : /toolchains/ia64-linux/bin/ia64-linux-gcc
> m32r : /toolchains/m32r-linux/bin/m32r-linux-gcc
> m68k : /toolchains/m68k-linux/bin/m68k-linux-gcc
> microblaze: /toolchains/microblaze-linux/bin/microblaze-linux-gcc
> mips : /toolchains/mips-linux/bin/mips-linux-gcc
> mips64 : /toolchains/mips64-linux/bin/mips64-linux-gcc
> nds32le : /toolchains/nds32le-linux-glibc-v1/bin/nds32le-linux-gcc
> nios2 : /opt/sourceryg++-2015.05/bin/nios2-linux-gnu-gcc
> or32 : /toolchains/or32-linux/bin/or32-linux-gcc
> powerpc : /toolchains/powerpc-linux/bin/powerpc-linux-gcc
> powerpc64 : /toolchains/powerpc64-linux/bin/powerpc64-linux-gcc
> ppc64le : /toolchains/ppc64le-linux/bin/ppc64le-linux-gcc
> s390x : /toolchains/s390x-linux/bin/s390x-linux-gcc
> sandbox : /usr/bin/gcc
> sh4 : /toolchains/sh4-linux/bin/sh4-linux-gcc
> sparc : /toolchains/sparc-linux/bin/sparc-linux-gcc
> sparc64 : /toolchains/sparc64-linux/bin/sparc64-linux-gcc
> tilegx : /toolchains/tilegx-linux/bin/tilegx-linux-gcc
> x86_64 : /usr/bin/x86_64-linux-gnu-gcc
>
> $ ./tools/buildman/buildman -b master -s
> boards.cfg is up to date. Nothing to do.
> Summary of 15 commits for 1067 boards (8 threads, 1 job per thread)
> 01: ARM64: zynqmp: Sync zynq_sdhci_init() declaration
> blackfin: + cm-bf561 blackstamp bf537-minotaur bct-brettl2
> cm-bf527 bf506f-ezkit ip04 bf527-sdp pr1 bf609-ezkit bf537-stamp
> bf527-ezkit-v2 cm-bf537e tcm-bf518 cm-bf537u bf527-ezkit cm-bf533
> bf533-ezkit ibf-dsp561 bf537-pnav bf537-srv1 cm-bf548 bf538f-ezkit
> bf548-ezkit bf525-ucr2 blackvme tcm-bf537 bf533-stamp bf518f-ezbrd
> bf527-ad7160-eval bf526-ezbrd bf561-ezkit br4
> aarch64: + hikey xilinx_zynqmp_ep
> avr32: + atngw100mkii grasshopper atstk1002 atngw100
> powerpc: + TQM834x katmai
> sandbox: + sandbox
> sh: + sh7753evb rsk7269 rsk7264 shmin ms7720se mpr2
> sh7785lcr_32bit sh7785lcr rsk7203
> nios2: + 10m50 3c120
> arm: + chromebook_jerry firefly-rk3288 x600
>
>
> Best regards,
> Thomas
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v3 3/3] nios2: add 3c120 and 10m50 devboards MAINTAINERS
2015-11-11 1:18 ` Thomas Chou
2015-11-11 1:41 ` Marek Vasut
@ 2015-11-11 1:48 ` Thomas Chou
2015-11-11 2:27 ` Marek Vasut
1 sibling, 1 reply; 18+ messages in thread
From: Thomas Chou @ 2015-11-11 1:48 UTC (permalink / raw)
To: u-boot
Hi Marek,
On 2015?11?11? 09:18, Thomas Chou wrote:
> I still miss some toolchains, like bfin. I can not find them on the
> internet. I will need to search my old HDDs. However, most others works.
> Do you have better results?
I look at sourceforge again. And the bfin toolchains is back.
Best regards,
Thomas
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v3 3/3] nios2: add 3c120 and 10m50 devboards MAINTAINERS
2015-11-11 1:48 ` Thomas Chou
@ 2015-11-11 2:27 ` Marek Vasut
0 siblings, 0 replies; 18+ messages in thread
From: Marek Vasut @ 2015-11-11 2:27 UTC (permalink / raw)
To: u-boot
On Wednesday, November 11, 2015 at 02:48:04 AM, Thomas Chou wrote:
> Hi Marek,
>
> On 2015?11?11? 09:18, Thomas Chou wrote:
> > I still miss some toolchains, like bfin. I can not find them on the
> > internet. I will need to search my old HDDs. However, most others works.
> > Do you have better results?
>
> I look at sourceforge again. And the bfin toolchains is back.
Hopefully they don't come with some additional ad-ware :-)
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v3 3/3] nios2: add 3c120 and 10m50 devboards MAINTAINERS
2015-11-11 1:41 ` Marek Vasut
@ 2015-11-11 2:55 ` Thomas Chou
2015-11-11 3:02 ` Marek Vasut
0 siblings, 1 reply; 18+ messages in thread
From: Thomas Chou @ 2015-11-11 2:55 UTC (permalink / raw)
To: u-boot
Hi Marek,
On 2015?11?11? 09:41, Marek Vasut wrote:
> I gave up on buildman. I want some builder where I can stop the builds if
> something goes wrong, but instead of this, buildman spawns multiple processes
> somewhere on my machine at random and I have no control over that. I'd like
> to reevaluate buildman eventually, but now I don't have the time or interest
> to dig in it.
I'd use "killall python" on another terminal to stop the builder. I
setup it in around an hour including download toolchains from kernel.org.
1. Create ~/.buildman from the template in buildman/README
# Buildman settings file
[toolchain]
root: /
rest: /toolchains/*
eldk: /opt/eldk-4.2
arm: /opt/linaro/gcc-linaro-arm-linux-gnueabihf-4.8-2013.08_linux
aarch64: /opt/linaro/gcc-linaro-aarch64-none-elf-4.8-2013.10_linux
[toolchain-alias]
x86: i386
blackfin: bfin
sh: sh4
nds32: nds32le
openrisc: or32
2. Fetch the toolchains from kernel.org
$ for i in aarch64 arm avr32 i386 m68k microblaze mips or32 powerpc sh4
sparc sparc64
do
./tools/buildman/buildman --fetch-arch $i
done
$ mv ~/.buildman-toolchains/*/* /toolchains/
# arc:
https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases
# blackfin: http://sourceforge.net/projects/adi-toolchain/files/
# nds32: http://osdk.andestech.com/packages/
# nios2: https://sourcery.mentor.com/GNUToolchain/subscription42545
# sh: http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu
nds32: http://osdk.andestech.com/packages/nds32le-linux-glibc-v1.tgz
Best regards,
Thomas
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v3 3/3] nios2: add 3c120 and 10m50 devboards MAINTAINERS
2015-11-11 2:55 ` Thomas Chou
@ 2015-11-11 3:02 ` Marek Vasut
2015-11-11 5:06 ` Thomas Chou
0 siblings, 1 reply; 18+ messages in thread
From: Marek Vasut @ 2015-11-11 3:02 UTC (permalink / raw)
To: u-boot
On Wednesday, November 11, 2015 at 03:55:10 AM, Thomas Chou wrote:
> Hi Marek,
>
> On 2015?11?11? 09:41, Marek Vasut wrote:
> > I gave up on buildman. I want some builder where I can stop the builds if
> > something goes wrong, but instead of this, buildman spawns multiple
> > processes somewhere on my machine at random and I have no control over
> > that. I'd like to reevaluate buildman eventually, but now I don't have
> > the time or interest to dig in it.
>
> I'd use "killall python" on another terminal to stop the builder.
I absolutelly don't want to do killall python, it'd bring down much more than
this buildman ;-)
> I setup it in around an hour including download toolchains from kernel.org.
>
> 1. Create ~/.buildman from the template in buildman/README
>
> # Buildman settings file
>
> [toolchain]
> root: /
> rest: /toolchains/*
> eldk: /opt/eldk-4.2
> arm: /opt/linaro/gcc-linaro-arm-linux-gnueabihf-4.8-2013.08_linux
> aarch64: /opt/linaro/gcc-linaro-aarch64-none-elf-4.8-2013.10_linux
>
> [toolchain-alias]
> x86: i386
> blackfin: bfin
> sh: sh4
> nds32: nds32le
> openrisc: or32
>
> 2. Fetch the toolchains from kernel.org
>
> $ for i in aarch64 arm avr32 i386 m68k microblaze mips or32 powerpc sh4
> sparc sparc64
> do
> ./tools/buildman/buildman --fetch-arch $i
> done
> $ mv ~/.buildman-toolchains/*/* /toolchains/
>
> # arc:
> https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases
> # blackfin: http://sourceforge.net/projects/adi-toolchain/files/
> # nds32: http://osdk.andestech.com/packages/
> # nios2: https://sourcery.mentor.com/GNUToolchain/subscription42545
> # sh: http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu
>
> nds32: http://osdk.andestech.com/packages/nds32le-linux-glibc-v1.tgz
OK, so can I use it in some blocking way ?
How do I for example build board "foo" and obtain the result of the build?
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v3 3/3] nios2: add 3c120 and 10m50 devboards MAINTAINERS
2015-11-11 3:02 ` Marek Vasut
@ 2015-11-11 5:06 ` Thomas Chou
2016-01-06 13:43 ` Marek Vasut
0 siblings, 1 reply; 18+ messages in thread
From: Thomas Chou @ 2015-11-11 5:06 UTC (permalink / raw)
To: u-boot
Hi Marek,
On 2015?11?11? 11:02, Marek Vasut wrote:
>> I'd use "killall python" on another terminal to stop the builder.
>
> I absolutelly don't want to do killall python, it'd bring down much more than
> this buildman ;-)
>
It does depend. On my desktop, there is no other python running as user.
I would suggest that a "kill" option could be added to buildman.
> OK, so can I use it in some blocking way ?
>
> How do I for example build board "foo" and obtain the result of the build?
What do you mean by "some blocking way"?
To build a board "foo",
$ ./tools/buildman/buildman foo
If you want binary, eg u-boot-dtb.bin, you can add "-k" flag.
You may find such usage at the last section of buildman/README, "How to
change from MAKEALL".
Best regards,
Thomas
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v3 3/3] nios2: add 3c120 and 10m50 devboards MAINTAINERS
2015-11-11 5:06 ` Thomas Chou
@ 2016-01-06 13:43 ` Marek Vasut
0 siblings, 0 replies; 18+ messages in thread
From: Marek Vasut @ 2016-01-06 13:43 UTC (permalink / raw)
To: u-boot
On Wednesday, November 11, 2015 at 06:06:21 AM, Thomas Chou wrote:
> Hi Marek,
Hi!
> On 2015?11?11? 11:02, Marek Vasut wrote:
> >> I'd use "killall python" on another terminal to stop the builder.
> >
> > I absolutelly don't want to do killall python, it'd bring down much more
> > than this buildman ;-)
>
> It does depend. On my desktop, there is no other python running as user.
> I would suggest that a "kill" option could be added to buildman.
>
> > OK, so can I use it in some blocking way ?
> >
> > How do I for example build board "foo" and obtain the result of the
> > build?
>
> What do you mean by "some blocking way"?
>
> To build a board "foo",
>
> $ ./tools/buildman/buildman foo
>
> If you want binary, eg u-boot-dtb.bin, you can add "-k" flag.
>
> You may find such usage at the last section of buildman/README, "How to
> change from MAKEALL".
I finally got buildman operational, it's pretty nice. Thanks :)
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2016-01-06 13:43 UTC | newest]
Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-11-10 12:37 [U-Boot] [PATCH 1/2] nios2: rename board nios2-generic to 3c120_devboard Thomas Chou
2015-11-10 12:37 ` [U-Boot] [PATCH 2/2] nios2: add 3c120 and 10m50 devboards MAINTAINERS Thomas Chou
2015-11-10 13:47 ` [U-Boot] [PATCH 1/2] nios2: rename board nios2-generic to 3c120_devboard Marek Vasut
2015-11-10 14:48 ` [U-Boot] [PATCH v2 " Thomas Chou
2015-11-10 14:48 ` [U-Boot] [PATCH v2 2/2] nios2: add 3c120 and 10m50 devboards MAINTAINERS Thomas Chou
2015-11-10 14:52 ` [U-Boot] [PATCH v2 1/2] nios2: rename board nios2-generic to 3c120_devboard Marek Vasut
2015-11-11 0:06 ` [U-Boot] [PATCH v3 1/3] " Thomas Chou
2015-11-11 0:06 ` [U-Boot] [PATCH v3 2/3] nios2: change README.nios2 to use 10m50 as template Thomas Chou
2015-11-11 0:06 ` [U-Boot] [PATCH v3 3/3] nios2: add 3c120 and 10m50 devboards MAINTAINERS Thomas Chou
2015-11-11 0:27 ` Marek Vasut
2015-11-11 1:18 ` Thomas Chou
2015-11-11 1:41 ` Marek Vasut
2015-11-11 2:55 ` Thomas Chou
2015-11-11 3:02 ` Marek Vasut
2015-11-11 5:06 ` Thomas Chou
2016-01-06 13:43 ` Marek Vasut
2015-11-11 1:48 ` Thomas Chou
2015-11-11 2:27 ` Marek Vasut
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.