All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v6 0/5] clk: shmobile: Add new CPG/MSSR driver
@ 2015-11-12 15:54 ` Geert Uytterhoeven
  0 siblings, 0 replies; 20+ messages in thread
From: Geert Uytterhoeven @ 2015-11-12 15:54 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Magnus Damm, Simon Horman,
	Laurent Pinchart
  Cc: linux-clk, linux-sh, linux-kernel, Geert Uytterhoeven

	Hi Mike, Stephen, et al.,

This series adds a new driver for the Renesas CPG (Clock Pulse
Generator) and MSSR (Module Standby and Software Reset) blocks for R-Car
H3 (r8a7795).  This is supposed to be more in-line with current CCF best
practices, and allows expansion to cover the module reset functionality
in the future. This drivers follows the DT bindings in
Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt, which have
been accepted in clk/clk-next.
Support for other SoCs may be added later.

  - Patch 1 reworks configuration after the removal of shmobile-legacy,
    and prepares for the advent of arm64 support, where
    CONFIG_ARCH_SHMOBILE_MULTI is not defined.
  - Patch 2 makes clock-output-names optional in the DIV6 driver.
    This is a bit unrelated, but I had sent this patch before, and
    there's a contextual dependency,
  - Patch 3 prepares the existing DIV6 driver for reuse,
  - Patch 4 introduces the new CPG/MSSR driver core, to be used by
    several SoC-specific drivers,
  - Patch 5 introduces the new r8a7795-specific driver.

Compared to v5, only the r8a7795-specific driver (patch 5) received a
few bug fixes and enhancements.  More detailed changelog information is
available in the individual patches.

For your convenience, I pushed these patches and its dependencies to the
topic/cpg-mssr-v6 branch of my renesas-drivers repository at
https://git.kernel.org/cgit/linux/kernel/git/geert/renesas-drivers.git/log/?h=topic/cpg-mssr-v6.

A full integration for R-Car Gen3 is available in the topic/gen3-latest
branch.

Thanks!

References:
  - v5 = "[PATCH v5 0/5] clk: shmobile: Add new CPG/MSSR driver"
    (https://lkml.org/lkml/2015/10/29/198)
  - v4 = "[PATCH/RFC v4 0/5] clk: shmobile: Add new Renesas CPG/MSSR DT
    bindings" (http://www.spinics.net/lists/devicetree/msg98342.html)
  - v3 = "[PATCH/RFC v3 0/3] clk: shmobile: Add new Renesas CPG/MSSR DT
    bindings" (http://www.spinics.net/lists/linux-sh/msg45870.html)
  - v2+ ≈ "[PATCH v8 00/05] Renesas R-Car Gen3 CPG support V8"
    (http://www.spinics.net/lists/linux-clk/msg03288.html)
  - v2 = "[PATCH/RFC v2 0/4] Renesas CPG/MSTP DT Binding Proposal"
    (http://www.spinics.net/lists/linux-clk/msg03132.html)
  - v1 = "Renesas CPG/MSTP DT Binding Proposal"
    (http://www.spinics.net/lists/linux-clk/msg01189.html)


Geert Uytterhoeven (4):
  clk: shmobile: div6: Make clock-output-names optional
  clk: shmobile: div6: Extract cpg_div6_register()
  clk: shmobile: Add new CPG/MSSR driver core
  clk: shmobile: r8a7795: Add new CPG/MSSR driver

Magnus Damm (1):
  clk: shmobile: Rework CONFIG_ARCH_SHMOBILE_MULTI

 .../bindings/clock/renesas,cpg-div6-clocks.txt     |   4 +
 drivers/clk/Makefile                               |   1 +
 drivers/clk/shmobile/Makefile                      |  24 +-
 drivers/clk/shmobile/clk-div6.c                    | 137 +++--
 drivers/clk/shmobile/clk-div6.h                    |   7 +
 drivers/clk/shmobile/r8a7795-cpg-mssr.c            | 382 +++++++++++++
 drivers/clk/shmobile/renesas-cpg-mssr.c            | 593 +++++++++++++++++++++
 drivers/clk/shmobile/renesas-cpg-mssr.h            | 132 +++++
 8 files changed, 1217 insertions(+), 63 deletions(-)
 create mode 100644 drivers/clk/shmobile/clk-div6.h
 create mode 100644 drivers/clk/shmobile/r8a7795-cpg-mssr.c
 create mode 100644 drivers/clk/shmobile/renesas-cpg-mssr.c
 create mode 100644 drivers/clk/shmobile/renesas-cpg-mssr.h

-- 
1.9.1

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds

^ permalink raw reply	[flat|nested] 20+ messages in thread

* [PATCH v6 0/5] clk: shmobile: Add new CPG/MSSR driver
@ 2015-11-12 15:54 ` Geert Uytterhoeven
  0 siblings, 0 replies; 20+ messages in thread
From: Geert Uytterhoeven @ 2015-11-12 15:54 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Magnus Damm, Simon Horman,
	Laurent Pinchart
  Cc: linux-clk, linux-sh, linux-kernel, Geert Uytterhoeven

	Hi Mike, Stephen, et al.,

This series adds a new driver for the Renesas CPG (Clock Pulse
Generator) and MSSR (Module Standby and Software Reset) blocks for R-Car
H3 (r8a7795).  This is supposed to be more in-line with current CCF best
practices, and allows expansion to cover the module reset functionality
in the future. This drivers follows the DT bindings in
Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt, which have
been accepted in clk/clk-next.
Support for other SoCs may be added later.

  - Patch 1 reworks configuration after the removal of shmobile-legacy,
    and prepares for the advent of arm64 support, where
    CONFIG_ARCH_SHMOBILE_MULTI is not defined.
  - Patch 2 makes clock-output-names optional in the DIV6 driver.
    This is a bit unrelated, but I had sent this patch before, and
    there's a contextual dependency,
  - Patch 3 prepares the existing DIV6 driver for reuse,
  - Patch 4 introduces the new CPG/MSSR driver core, to be used by
    several SoC-specific drivers,
  - Patch 5 introduces the new r8a7795-specific driver.

Compared to v5, only the r8a7795-specific driver (patch 5) received a
few bug fixes and enhancements.  More detailed changelog information is
available in the individual patches.

For your convenience, I pushed these patches and its dependencies to the
topic/cpg-mssr-v6 branch of my renesas-drivers repository at
https://git.kernel.org/cgit/linux/kernel/git/geert/renesas-drivers.git/log/?h=topic/cpg-mssr-v6.

A full integration for R-Car Gen3 is available in the topic/gen3-latest
branch.

Thanks!

References:
  - v5 = "[PATCH v5 0/5] clk: shmobile: Add new CPG/MSSR driver"
    (https://lkml.org/lkml/2015/10/29/198)
  - v4 = "[PATCH/RFC v4 0/5] clk: shmobile: Add new Renesas CPG/MSSR DT
    bindings" (http://www.spinics.net/lists/devicetree/msg98342.html)
  - v3 = "[PATCH/RFC v3 0/3] clk: shmobile: Add new Renesas CPG/MSSR DT
    bindings" (http://www.spinics.net/lists/linux-sh/msg45870.html)
  - v2+ ≈ "[PATCH v8 00/05] Renesas R-Car Gen3 CPG support V8"
    (http://www.spinics.net/lists/linux-clk/msg03288.html)
  - v2 = "[PATCH/RFC v2 0/4] Renesas CPG/MSTP DT Binding Proposal"
    (http://www.spinics.net/lists/linux-clk/msg03132.html)
  - v1 = "Renesas CPG/MSTP DT Binding Proposal"
    (http://www.spinics.net/lists/linux-clk/msg01189.html)


Geert Uytterhoeven (4):
  clk: shmobile: div6: Make clock-output-names optional
  clk: shmobile: div6: Extract cpg_div6_register()
  clk: shmobile: Add new CPG/MSSR driver core
  clk: shmobile: r8a7795: Add new CPG/MSSR driver

Magnus Damm (1):
  clk: shmobile: Rework CONFIG_ARCH_SHMOBILE_MULTI

 .../bindings/clock/renesas,cpg-div6-clocks.txt     |   4 +
 drivers/clk/Makefile                               |   1 +
 drivers/clk/shmobile/Makefile                      |  24 +-
 drivers/clk/shmobile/clk-div6.c                    | 137 +++--
 drivers/clk/shmobile/clk-div6.h                    |   7 +
 drivers/clk/shmobile/r8a7795-cpg-mssr.c            | 382 +++++++++++++
 drivers/clk/shmobile/renesas-cpg-mssr.c            | 593 +++++++++++++++++++++
 drivers/clk/shmobile/renesas-cpg-mssr.h            | 132 +++++
 8 files changed, 1217 insertions(+), 63 deletions(-)
 create mode 100644 drivers/clk/shmobile/clk-div6.h
 create mode 100644 drivers/clk/shmobile/r8a7795-cpg-mssr.c
 create mode 100644 drivers/clk/shmobile/renesas-cpg-mssr.c
 create mode 100644 drivers/clk/shmobile/renesas-cpg-mssr.h

-- 
1.9.1

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds

^ permalink raw reply	[flat|nested] 20+ messages in thread

* [PATCH v6 1/5] clk: shmobile: Rework CONFIG_ARCH_SHMOBILE_MULTI
  2015-11-12 15:54 ` Geert Uytterhoeven
@ 2015-11-12 15:54   ` Geert Uytterhoeven
  -1 siblings, 0 replies; 20+ messages in thread
From: Geert Uytterhoeven @ 2015-11-12 15:54 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Magnus Damm, Simon Horman,
	Laurent Pinchart
  Cc: linux-clk, linux-sh, linux-kernel, Geert Uytterhoeven

From: Magnus Damm <damm+renesas@opensource.se>

Shmobile is all multiplatform these days, so get rid of the reference to
CONFIG_ARCH_SHMOBILE_MULTI in drivers/clk/shmobile/.

Also instead of always enabling DIV6 and MSTP adjust the Makefile
to enable DIV6 and MSTP depending on if they are included in the
SoC or not.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v6:
  - No changes,

v5:
  - Integrated in this series as a contextual dependency.
---
 drivers/clk/shmobile/Makefile | 22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)

diff --git a/drivers/clk/shmobile/Makefile b/drivers/clk/shmobile/Makefile
index 97c71c885e4f38c5..1eb947db6f5926a0 100644
--- a/drivers/clk/shmobile/Makefile
+++ b/drivers/clk/shmobile/Makefile
@@ -1,13 +1,11 @@
 obj-$(CONFIG_ARCH_EMEV2)		+= clk-emev2.o
-obj-$(CONFIG_ARCH_R7S72100)		+= clk-rz.o
-obj-$(CONFIG_ARCH_R8A73A4)		+= clk-r8a73a4.o
-obj-$(CONFIG_ARCH_R8A7740)		+= clk-r8a7740.o
-obj-$(CONFIG_ARCH_R8A7778)		+= clk-r8a7778.o
-obj-$(CONFIG_ARCH_R8A7779)		+= clk-r8a7779.o
-obj-$(CONFIG_ARCH_R8A7790)		+= clk-rcar-gen2.o
-obj-$(CONFIG_ARCH_R8A7791)		+= clk-rcar-gen2.o
-obj-$(CONFIG_ARCH_R8A7793)		+= clk-rcar-gen2.o
-obj-$(CONFIG_ARCH_R8A7794)		+= clk-rcar-gen2.o
-obj-$(CONFIG_ARCH_SH73A0)		+= clk-sh73a0.o
-obj-$(CONFIG_ARCH_SHMOBILE_MULTI)	+= clk-div6.o
-obj-$(CONFIG_ARCH_SHMOBILE_MULTI)	+= clk-mstp.o
+obj-$(CONFIG_ARCH_R7S72100)		+= clk-rz.o clk-mstp.o
+obj-$(CONFIG_ARCH_R8A73A4)		+= clk-r8a73a4.o clk-mstp.o clk-div6.o
+obj-$(CONFIG_ARCH_R8A7740)		+= clk-r8a7740.o clk-mstp.o clk-div6.o
+obj-$(CONFIG_ARCH_R8A7778)		+= clk-r8a7778.o clk-mstp.o
+obj-$(CONFIG_ARCH_R8A7779)		+= clk-r8a7779.o clk-mstp.o
+obj-$(CONFIG_ARCH_R8A7790)		+= clk-rcar-gen2.o clk-mstp.o clk-div6.o
+obj-$(CONFIG_ARCH_R8A7791)		+= clk-rcar-gen2.o clk-mstp.o clk-div6.o
+obj-$(CONFIG_ARCH_R8A7793)		+= clk-rcar-gen2.o clk-mstp.o clk-div6.o
+obj-$(CONFIG_ARCH_R8A7794)		+= clk-rcar-gen2.o clk-mstp.o clk-div6.o
+obj-$(CONFIG_ARCH_SH73A0)		+= clk-sh73a0.o clk-mstp.o clk-div6.o
-- 
1.9.1


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [PATCH v6 1/5] clk: shmobile: Rework CONFIG_ARCH_SHMOBILE_MULTI
@ 2015-11-12 15:54   ` Geert Uytterhoeven
  0 siblings, 0 replies; 20+ messages in thread
From: Geert Uytterhoeven @ 2015-11-12 15:54 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Magnus Damm, Simon Horman,
	Laurent Pinchart
  Cc: linux-clk, linux-sh, linux-kernel, Geert Uytterhoeven

From: Magnus Damm <damm+renesas@opensource.se>

Shmobile is all multiplatform these days, so get rid of the reference to
CONFIG_ARCH_SHMOBILE_MULTI in drivers/clk/shmobile/.

Also instead of always enabling DIV6 and MSTP adjust the Makefile
to enable DIV6 and MSTP depending on if they are included in the
SoC or not.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v6:
  - No changes,

v5:
  - Integrated in this series as a contextual dependency.
---
 drivers/clk/shmobile/Makefile | 22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)

diff --git a/drivers/clk/shmobile/Makefile b/drivers/clk/shmobile/Makefile
index 97c71c885e4f38c5..1eb947db6f5926a0 100644
--- a/drivers/clk/shmobile/Makefile
+++ b/drivers/clk/shmobile/Makefile
@@ -1,13 +1,11 @@
 obj-$(CONFIG_ARCH_EMEV2)		+= clk-emev2.o
-obj-$(CONFIG_ARCH_R7S72100)		+= clk-rz.o
-obj-$(CONFIG_ARCH_R8A73A4)		+= clk-r8a73a4.o
-obj-$(CONFIG_ARCH_R8A7740)		+= clk-r8a7740.o
-obj-$(CONFIG_ARCH_R8A7778)		+= clk-r8a7778.o
-obj-$(CONFIG_ARCH_R8A7779)		+= clk-r8a7779.o
-obj-$(CONFIG_ARCH_R8A7790)		+= clk-rcar-gen2.o
-obj-$(CONFIG_ARCH_R8A7791)		+= clk-rcar-gen2.o
-obj-$(CONFIG_ARCH_R8A7793)		+= clk-rcar-gen2.o
-obj-$(CONFIG_ARCH_R8A7794)		+= clk-rcar-gen2.o
-obj-$(CONFIG_ARCH_SH73A0)		+= clk-sh73a0.o
-obj-$(CONFIG_ARCH_SHMOBILE_MULTI)	+= clk-div6.o
-obj-$(CONFIG_ARCH_SHMOBILE_MULTI)	+= clk-mstp.o
+obj-$(CONFIG_ARCH_R7S72100)		+= clk-rz.o clk-mstp.o
+obj-$(CONFIG_ARCH_R8A73A4)		+= clk-r8a73a4.o clk-mstp.o clk-div6.o
+obj-$(CONFIG_ARCH_R8A7740)		+= clk-r8a7740.o clk-mstp.o clk-div6.o
+obj-$(CONFIG_ARCH_R8A7778)		+= clk-r8a7778.o clk-mstp.o
+obj-$(CONFIG_ARCH_R8A7779)		+= clk-r8a7779.o clk-mstp.o
+obj-$(CONFIG_ARCH_R8A7790)		+= clk-rcar-gen2.o clk-mstp.o clk-div6.o
+obj-$(CONFIG_ARCH_R8A7791)		+= clk-rcar-gen2.o clk-mstp.o clk-div6.o
+obj-$(CONFIG_ARCH_R8A7793)		+= clk-rcar-gen2.o clk-mstp.o clk-div6.o
+obj-$(CONFIG_ARCH_R8A7794)		+= clk-rcar-gen2.o clk-mstp.o clk-div6.o
+obj-$(CONFIG_ARCH_SH73A0)		+= clk-sh73a0.o clk-mstp.o clk-div6.o
-- 
1.9.1


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [PATCH v6 2/5] clk: shmobile: div6: Make clock-output-names optional
  2015-11-12 15:54 ` Geert Uytterhoeven
@ 2015-11-12 15:54   ` Geert Uytterhoeven
  -1 siblings, 0 replies; 20+ messages in thread
From: Geert Uytterhoeven @ 2015-11-12 15:54 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Magnus Damm, Simon Horman,
	Laurent Pinchart
  Cc: linux-clk, linux-sh, linux-kernel, Geert Uytterhoeven

Renesas DIV6 clocks provide a single clock output.  Hence make the
"clock-output-names" DT property optional instead of mandatory. In case
the DT property is omitted the DT node name will be used.

Rename the variable "name" to "clk_name" to make the code more similar
with fixed-factor-clock.c, and to avoid a conflict with a nested local
variable while we're at it.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v6:
  - No changes,

v5:
  - Integrated in this series as a contextual dependency.
---
 .../devicetree/bindings/clock/renesas,cpg-div6-clocks.txt   |  4 ++++
 drivers/clk/shmobile/clk-div6.c                             | 13 +++----------
 2 files changed, 7 insertions(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt
index 38dcf03701430e60..ae36ab84291988b7 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt
@@ -20,6 +20,10 @@ Required Properties:
     clocks must be specified.  For clocks with multiple parents, invalid
     settings must be specified as "<0>".
   - #clock-cells: Must be 0
+
+
+Optional Properties:
+
   - clock-output-names: The name of the clock as a free-form string
 
 
diff --git a/drivers/clk/shmobile/clk-div6.c b/drivers/clk/shmobile/clk-div6.c
index b4c8d6746f68a7b8..57016ff9c585fc6e 100644
--- a/drivers/clk/shmobile/clk-div6.c
+++ b/drivers/clk/shmobile/clk-div6.c
@@ -178,10 +178,9 @@ static void __init cpg_div6_clock_init(struct device_node *np)
 	const char **parent_names;
 	struct clk_init_data init;
 	struct div6_clock *clock;
-	const char *name;
+	const char *clk_name = np->name;
 	struct clk *clk;
 	unsigned int i;
-	int ret;
 
 	clock = kzalloc(sizeof(*clock), GFP_KERNEL);
 	if (!clock)
@@ -215,13 +214,7 @@ static void __init cpg_div6_clock_init(struct device_node *np)
 	clock->div = (clk_readl(clock->reg) & CPG_DIV6_DIV_MASK) + 1;
 
 	/* Parse the DT properties. */
-	ret = of_property_read_string(np, "clock-output-names", &name);
-	if (ret < 0) {
-		pr_err("%s: failed to get %s DIV6 clock output name\n",
-		       __func__, np->name);
-		goto error;
-	}
-
+	of_property_read_string(np, "clock-output-names", &clk_name);
 
 	for (i = 0, valid_parents = 0; i < num_parents; i++) {
 		const char *name = of_clk_get_parent_name(np, i);
@@ -255,7 +248,7 @@ static void __init cpg_div6_clock_init(struct device_node *np)
 	}
 
 	/* Register the clock. */
-	init.name = name;
+	init.name = clk_name;
 	init.ops = &cpg_div6_clock_ops;
 	init.flags = CLK_IS_BASIC;
 	init.parent_names = parent_names;
-- 
1.9.1


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [PATCH v6 2/5] clk: shmobile: div6: Make clock-output-names optional
@ 2015-11-12 15:54   ` Geert Uytterhoeven
  0 siblings, 0 replies; 20+ messages in thread
From: Geert Uytterhoeven @ 2015-11-12 15:54 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Magnus Damm, Simon Horman,
	Laurent Pinchart
  Cc: linux-clk, linux-sh, linux-kernel, Geert Uytterhoeven

Renesas DIV6 clocks provide a single clock output.  Hence make the
"clock-output-names" DT property optional instead of mandatory. In case
the DT property is omitted the DT node name will be used.

Rename the variable "name" to "clk_name" to make the code more similar
with fixed-factor-clock.c, and to avoid a conflict with a nested local
variable while we're at it.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v6:
  - No changes,

v5:
  - Integrated in this series as a contextual dependency.
---
 .../devicetree/bindings/clock/renesas,cpg-div6-clocks.txt   |  4 ++++
 drivers/clk/shmobile/clk-div6.c                             | 13 +++----------
 2 files changed, 7 insertions(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt
index 38dcf03701430e60..ae36ab84291988b7 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt
@@ -20,6 +20,10 @@ Required Properties:
     clocks must be specified.  For clocks with multiple parents, invalid
     settings must be specified as "<0>".
   - #clock-cells: Must be 0
+
+
+Optional Properties:
+
   - clock-output-names: The name of the clock as a free-form string
 
 
diff --git a/drivers/clk/shmobile/clk-div6.c b/drivers/clk/shmobile/clk-div6.c
index b4c8d6746f68a7b8..57016ff9c585fc6e 100644
--- a/drivers/clk/shmobile/clk-div6.c
+++ b/drivers/clk/shmobile/clk-div6.c
@@ -178,10 +178,9 @@ static void __init cpg_div6_clock_init(struct device_node *np)
 	const char **parent_names;
 	struct clk_init_data init;
 	struct div6_clock *clock;
-	const char *name;
+	const char *clk_name = np->name;
 	struct clk *clk;
 	unsigned int i;
-	int ret;
 
 	clock = kzalloc(sizeof(*clock), GFP_KERNEL);
 	if (!clock)
@@ -215,13 +214,7 @@ static void __init cpg_div6_clock_init(struct device_node *np)
 	clock->div = (clk_readl(clock->reg) & CPG_DIV6_DIV_MASK) + 1;
 
 	/* Parse the DT properties. */
-	ret = of_property_read_string(np, "clock-output-names", &name);
-	if (ret < 0) {
-		pr_err("%s: failed to get %s DIV6 clock output name\n",
-		       __func__, np->name);
-		goto error;
-	}
-
+	of_property_read_string(np, "clock-output-names", &clk_name);
 
 	for (i = 0, valid_parents = 0; i < num_parents; i++) {
 		const char *name = of_clk_get_parent_name(np, i);
@@ -255,7 +248,7 @@ static void __init cpg_div6_clock_init(struct device_node *np)
 	}
 
 	/* Register the clock. */
-	init.name = name;
+	init.name = clk_name;
 	init.ops = &cpg_div6_clock_ops;
 	init.flags = CLK_IS_BASIC;
 	init.parent_names = parent_names;
-- 
1.9.1


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [PATCH v6 3/5] clk: shmobile: div6: Extract cpg_div6_register()
  2015-11-12 15:54 ` Geert Uytterhoeven
@ 2015-11-12 15:54   ` Geert Uytterhoeven
  -1 siblings, 0 replies; 20+ messages in thread
From: Geert Uytterhoeven @ 2015-11-12 15:54 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Magnus Damm, Simon Horman,
	Laurent Pinchart
  Cc: linux-clk, linux-sh, linux-kernel, Geert Uytterhoeven

Extract cpg_div6_register(), to allow registering div6 clocks from
another clock driver.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v6:
  - Add Acked-by,

v5:
  - Document cpg_div6_register(),
  - Free clock on clock->parents allocation failure,
  - Add include guards to clk-div6.h,
  - Drop RFC state,

v4:
  - New.
---
 drivers/clk/shmobile/clk-div6.c | 132 ++++++++++++++++++++++++++--------------
 drivers/clk/shmobile/clk-div6.h |   7 +++
 2 files changed, 94 insertions(+), 45 deletions(-)
 create mode 100644 drivers/clk/shmobile/clk-div6.h

diff --git a/drivers/clk/shmobile/clk-div6.c b/drivers/clk/shmobile/clk-div6.c
index 57016ff9c585fc6e..9999947694509d58 100644
--- a/drivers/clk/shmobile/clk-div6.c
+++ b/drivers/clk/shmobile/clk-div6.c
@@ -18,6 +18,8 @@
 #include <linux/of_address.h>
 #include <linux/slab.h>
 
+#include "clk-div6.h"
+
 #define CPG_DIV6_CKSTP		BIT(8)
 #define CPG_DIV6_DIV(d)		((d) & 0x3f)
 #define CPG_DIV6_DIV_MASK	0x3f
@@ -172,60 +174,44 @@ static const struct clk_ops cpg_div6_clock_ops = {
 	.set_rate = cpg_div6_clock_set_rate,
 };
 
-static void __init cpg_div6_clock_init(struct device_node *np)
+
+/**
+ * cpg_div6_register - Register a DIV6 clock
+ * @name: Name of the DIV6 clock
+ * @num_parents: Number of parent clocks of the DIV6 clock (1, 4, or 8)
+ * @parent_names: Array containing the names of the parent clocks
+ * @reg: Mapped register used to control the DIV6 clock
+ */
+struct clk * __init cpg_div6_register(const char *name,
+				      unsigned int num_parents,
+				      const char **parent_names,
+				      void __iomem *reg)
 {
-	unsigned int num_parents, valid_parents;
-	const char **parent_names;
+	unsigned int valid_parents;
 	struct clk_init_data init;
 	struct div6_clock *clock;
-	const char *clk_name = np->name;
 	struct clk *clk;
 	unsigned int i;
 
 	clock = kzalloc(sizeof(*clock), GFP_KERNEL);
 	if (!clock)
-		return;
+		return ERR_PTR(-ENOMEM);
 
-	num_parents = of_clk_get_parent_count(np);
-	if (num_parents < 1) {
-		pr_err("%s: no parent found for %s DIV6 clock\n",
-		       __func__, np->name);
-		return;
+	clock->parents = kmalloc_array(num_parents, sizeof(*clock->parents),
+				       GFP_KERNEL);
+	if (!clock->parents) {
+		clk = ERR_PTR(-ENOMEM);
+		goto free_clock;
 	}
 
-	clock->parents = kmalloc_array(num_parents, sizeof(*clock->parents),
-		GFP_KERNEL);
-	parent_names = kmalloc_array(num_parents, sizeof(*parent_names),
-				GFP_KERNEL);
-	if (!parent_names)
-		return;
+	clock->reg = reg;
 
-	/* Remap the clock register and read the divisor. Disabling the
-	 * clock overwrites the divisor, so we need to cache its value for the
-	 * enable operation.
+	/*
+	 * Read the divisor. Disabling the clock overwrites the divisor, so we
+	 * need to cache its value for the enable operation.
 	 */
-	clock->reg = of_iomap(np, 0);
-	if (clock->reg = NULL) {
-		pr_err("%s: failed to map %s DIV6 clock register\n",
-		       __func__, np->name);
-		goto error;
-	}
-
 	clock->div = (clk_readl(clock->reg) & CPG_DIV6_DIV_MASK) + 1;
 
-	/* Parse the DT properties. */
-	of_property_read_string(np, "clock-output-names", &clk_name);
-
-	for (i = 0, valid_parents = 0; i < num_parents; i++) {
-		const char *name = of_clk_get_parent_name(np, i);
-
-		if (name) {
-			parent_names[valid_parents] = name;
-			clock->parents[valid_parents] = i;
-			valid_parents++;
-		}
-	}
-
 	switch (num_parents) {
 	case 1:
 		/* fixed parent clock */
@@ -243,12 +229,22 @@ static void __init cpg_div6_clock_init(struct device_node *np)
 		break;
 	default:
 		pr_err("%s: invalid number of parents for DIV6 clock %s\n",
-		       __func__, np->name);
-		goto error;
+		       __func__, name);
+		clk = ERR_PTR(-EINVAL);
+		goto free_parents;
+	}
+
+	/* Filter out invalid parents */
+	for (i = 0, valid_parents = 0; i < num_parents; i++) {
+		if (parent_names[i]) {
+			parent_names[valid_parents] = parent_names[i];
+			clock->parents[valid_parents] = i;
+			valid_parents++;
+		}
 	}
 
 	/* Register the clock. */
-	init.name = clk_name;
+	init.name = name;
 	init.ops = &cpg_div6_clock_ops;
 	init.flags = CLK_IS_BASIC;
 	init.parent_names = parent_names;
@@ -257,6 +253,53 @@ static void __init cpg_div6_clock_init(struct device_node *np)
 	clock->hw.init = &init;
 
 	clk = clk_register(NULL, &clock->hw);
+	if (IS_ERR(clk))
+		goto free_parents;
+
+	return clk;
+
+free_parents:
+	kfree(clock->parents);
+free_clock:
+	kfree(clock);
+	return clk;
+}
+
+static void __init cpg_div6_clock_init(struct device_node *np)
+{
+	unsigned int num_parents;
+	const char **parent_names;
+	const char *clk_name = np->name;
+	void __iomem *reg;
+	struct clk *clk;
+	unsigned int i;
+
+	num_parents = of_clk_get_parent_count(np);
+	if (num_parents < 1) {
+		pr_err("%s: no parent found for %s DIV6 clock\n",
+		       __func__, np->name);
+		return;
+	}
+
+	parent_names = kmalloc_array(num_parents, sizeof(*parent_names),
+				GFP_KERNEL);
+	if (!parent_names)
+		return;
+
+	reg = of_iomap(np, 0);
+	if (reg = NULL) {
+		pr_err("%s: failed to map %s DIV6 clock register\n",
+		       __func__, np->name);
+		goto error;
+	}
+
+	/* Parse the DT properties. */
+	of_property_read_string(np, "clock-output-names", &clk_name);
+
+	for (i = 0; i < num_parents; i++)
+		parent_names[i] = of_clk_get_parent_name(np, i);
+
+	clk = cpg_div6_register(clk_name, num_parents, parent_names, reg);
 	if (IS_ERR(clk)) {
 		pr_err("%s: failed to register %s DIV6 clock (%ld)\n",
 		       __func__, np->name, PTR_ERR(clk));
@@ -269,9 +312,8 @@ static void __init cpg_div6_clock_init(struct device_node *np)
 	return;
 
 error:
-	if (clock->reg)
-		iounmap(clock->reg);
+	if (reg)
+		iounmap(reg);
 	kfree(parent_names);
-	kfree(clock);
 }
 CLK_OF_DECLARE(cpg_div6_clk, "renesas,cpg-div6-clock", cpg_div6_clock_init);
diff --git a/drivers/clk/shmobile/clk-div6.h b/drivers/clk/shmobile/clk-div6.h
new file mode 100644
index 0000000000000000..9a85a95188daa813
--- /dev/null
+++ b/drivers/clk/shmobile/clk-div6.h
@@ -0,0 +1,7 @@
+#ifndef __SHMOBILE_CLK_DIV6_H__
+#define __SHMOBILE_CLK_DIV6_H__
+
+struct clk *cpg_div6_register(const char *name, unsigned int num_parents,
+			      const char **parent_names, void __iomem *reg);
+
+#endif
-- 
1.9.1


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [PATCH v6 3/5] clk: shmobile: div6: Extract cpg_div6_register()
@ 2015-11-12 15:54   ` Geert Uytterhoeven
  0 siblings, 0 replies; 20+ messages in thread
From: Geert Uytterhoeven @ 2015-11-12 15:54 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Magnus Damm, Simon Horman,
	Laurent Pinchart
  Cc: linux-clk, linux-sh, linux-kernel, Geert Uytterhoeven

Extract cpg_div6_register(), to allow registering div6 clocks from
another clock driver.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v6:
  - Add Acked-by,

v5:
  - Document cpg_div6_register(),
  - Free clock on clock->parents allocation failure,
  - Add include guards to clk-div6.h,
  - Drop RFC state,

v4:
  - New.
---
 drivers/clk/shmobile/clk-div6.c | 132 ++++++++++++++++++++++++++--------------
 drivers/clk/shmobile/clk-div6.h |   7 +++
 2 files changed, 94 insertions(+), 45 deletions(-)
 create mode 100644 drivers/clk/shmobile/clk-div6.h

diff --git a/drivers/clk/shmobile/clk-div6.c b/drivers/clk/shmobile/clk-div6.c
index 57016ff9c585fc6e..9999947694509d58 100644
--- a/drivers/clk/shmobile/clk-div6.c
+++ b/drivers/clk/shmobile/clk-div6.c
@@ -18,6 +18,8 @@
 #include <linux/of_address.h>
 #include <linux/slab.h>
 
+#include "clk-div6.h"
+
 #define CPG_DIV6_CKSTP		BIT(8)
 #define CPG_DIV6_DIV(d)		((d) & 0x3f)
 #define CPG_DIV6_DIV_MASK	0x3f
@@ -172,60 +174,44 @@ static const struct clk_ops cpg_div6_clock_ops = {
 	.set_rate = cpg_div6_clock_set_rate,
 };
 
-static void __init cpg_div6_clock_init(struct device_node *np)
+
+/**
+ * cpg_div6_register - Register a DIV6 clock
+ * @name: Name of the DIV6 clock
+ * @num_parents: Number of parent clocks of the DIV6 clock (1, 4, or 8)
+ * @parent_names: Array containing the names of the parent clocks
+ * @reg: Mapped register used to control the DIV6 clock
+ */
+struct clk * __init cpg_div6_register(const char *name,
+				      unsigned int num_parents,
+				      const char **parent_names,
+				      void __iomem *reg)
 {
-	unsigned int num_parents, valid_parents;
-	const char **parent_names;
+	unsigned int valid_parents;
 	struct clk_init_data init;
 	struct div6_clock *clock;
-	const char *clk_name = np->name;
 	struct clk *clk;
 	unsigned int i;
 
 	clock = kzalloc(sizeof(*clock), GFP_KERNEL);
 	if (!clock)
-		return;
+		return ERR_PTR(-ENOMEM);
 
-	num_parents = of_clk_get_parent_count(np);
-	if (num_parents < 1) {
-		pr_err("%s: no parent found for %s DIV6 clock\n",
-		       __func__, np->name);
-		return;
+	clock->parents = kmalloc_array(num_parents, sizeof(*clock->parents),
+				       GFP_KERNEL);
+	if (!clock->parents) {
+		clk = ERR_PTR(-ENOMEM);
+		goto free_clock;
 	}
 
-	clock->parents = kmalloc_array(num_parents, sizeof(*clock->parents),
-		GFP_KERNEL);
-	parent_names = kmalloc_array(num_parents, sizeof(*parent_names),
-				GFP_KERNEL);
-	if (!parent_names)
-		return;
+	clock->reg = reg;
 
-	/* Remap the clock register and read the divisor. Disabling the
-	 * clock overwrites the divisor, so we need to cache its value for the
-	 * enable operation.
+	/*
+	 * Read the divisor. Disabling the clock overwrites the divisor, so we
+	 * need to cache its value for the enable operation.
 	 */
-	clock->reg = of_iomap(np, 0);
-	if (clock->reg == NULL) {
-		pr_err("%s: failed to map %s DIV6 clock register\n",
-		       __func__, np->name);
-		goto error;
-	}
-
 	clock->div = (clk_readl(clock->reg) & CPG_DIV6_DIV_MASK) + 1;
 
-	/* Parse the DT properties. */
-	of_property_read_string(np, "clock-output-names", &clk_name);
-
-	for (i = 0, valid_parents = 0; i < num_parents; i++) {
-		const char *name = of_clk_get_parent_name(np, i);
-
-		if (name) {
-			parent_names[valid_parents] = name;
-			clock->parents[valid_parents] = i;
-			valid_parents++;
-		}
-	}
-
 	switch (num_parents) {
 	case 1:
 		/* fixed parent clock */
@@ -243,12 +229,22 @@ static void __init cpg_div6_clock_init(struct device_node *np)
 		break;
 	default:
 		pr_err("%s: invalid number of parents for DIV6 clock %s\n",
-		       __func__, np->name);
-		goto error;
+		       __func__, name);
+		clk = ERR_PTR(-EINVAL);
+		goto free_parents;
+	}
+
+	/* Filter out invalid parents */
+	for (i = 0, valid_parents = 0; i < num_parents; i++) {
+		if (parent_names[i]) {
+			parent_names[valid_parents] = parent_names[i];
+			clock->parents[valid_parents] = i;
+			valid_parents++;
+		}
 	}
 
 	/* Register the clock. */
-	init.name = clk_name;
+	init.name = name;
 	init.ops = &cpg_div6_clock_ops;
 	init.flags = CLK_IS_BASIC;
 	init.parent_names = parent_names;
@@ -257,6 +253,53 @@ static void __init cpg_div6_clock_init(struct device_node *np)
 	clock->hw.init = &init;
 
 	clk = clk_register(NULL, &clock->hw);
+	if (IS_ERR(clk))
+		goto free_parents;
+
+	return clk;
+
+free_parents:
+	kfree(clock->parents);
+free_clock:
+	kfree(clock);
+	return clk;
+}
+
+static void __init cpg_div6_clock_init(struct device_node *np)
+{
+	unsigned int num_parents;
+	const char **parent_names;
+	const char *clk_name = np->name;
+	void __iomem *reg;
+	struct clk *clk;
+	unsigned int i;
+
+	num_parents = of_clk_get_parent_count(np);
+	if (num_parents < 1) {
+		pr_err("%s: no parent found for %s DIV6 clock\n",
+		       __func__, np->name);
+		return;
+	}
+
+	parent_names = kmalloc_array(num_parents, sizeof(*parent_names),
+				GFP_KERNEL);
+	if (!parent_names)
+		return;
+
+	reg = of_iomap(np, 0);
+	if (reg == NULL) {
+		pr_err("%s: failed to map %s DIV6 clock register\n",
+		       __func__, np->name);
+		goto error;
+	}
+
+	/* Parse the DT properties. */
+	of_property_read_string(np, "clock-output-names", &clk_name);
+
+	for (i = 0; i < num_parents; i++)
+		parent_names[i] = of_clk_get_parent_name(np, i);
+
+	clk = cpg_div6_register(clk_name, num_parents, parent_names, reg);
 	if (IS_ERR(clk)) {
 		pr_err("%s: failed to register %s DIV6 clock (%ld)\n",
 		       __func__, np->name, PTR_ERR(clk));
@@ -269,9 +312,8 @@ static void __init cpg_div6_clock_init(struct device_node *np)
 	return;
 
 error:
-	if (clock->reg)
-		iounmap(clock->reg);
+	if (reg)
+		iounmap(reg);
 	kfree(parent_names);
-	kfree(clock);
 }
 CLK_OF_DECLARE(cpg_div6_clk, "renesas,cpg-div6-clock", cpg_div6_clock_init);
diff --git a/drivers/clk/shmobile/clk-div6.h b/drivers/clk/shmobile/clk-div6.h
new file mode 100644
index 0000000000000000..9a85a95188daa813
--- /dev/null
+++ b/drivers/clk/shmobile/clk-div6.h
@@ -0,0 +1,7 @@
+#ifndef __SHMOBILE_CLK_DIV6_H__
+#define __SHMOBILE_CLK_DIV6_H__
+
+struct clk *cpg_div6_register(const char *name, unsigned int num_parents,
+			      const char **parent_names, void __iomem *reg);
+
+#endif
-- 
1.9.1


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [PATCH v6 4/5] clk: shmobile: Add new CPG/MSSR driver core
  2015-11-12 15:54 ` Geert Uytterhoeven
@ 2015-11-12 15:54   ` Geert Uytterhoeven
  -1 siblings, 0 replies; 20+ messages in thread
From: Geert Uytterhoeven @ 2015-11-12 15:54 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Magnus Damm, Simon Horman,
	Laurent Pinchart
  Cc: linux-clk, linux-sh, linux-kernel, Geert Uytterhoeven

Add the common core for the new Renesas Clock Pulse Generator / Module
Standby and Software Reset driver.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v6:
  - No changes,

v5:
  - Convert from CLK_OF_DECLARE() to a real platform_driver, initialized
    using platform_driver_probe() from subsys_initcall().
    Note that arch_initcall() would be OK for arm32, but not for arm64:
      - arm32 calls of_platform_populate() from arch_initcall(),
      - arm64 calls of_platform_populate() from arch_initcall_sync().
  - Implement handling of core clocks that are suitable for power
    management (not needed for R-Car, but useful for SH-Mobile AG5 and
    R-Mobile APE6),
  - Add cpg_mssr_info.init(), as initialization is now done from the
    core driver,
  - Move conversion from Module Clock numbers to IDs from run time (C
    code) to compile time (CPP macros for filling in tables),
  - Unify some code to handle CLK_TYPE_IN and CLK_TYPE_FF,
  - Rename from clk-cpg-mssr to renesas-cpg-mssr,
  - Add include guards to clk-cpg-mssr.h,
  - Improve struct documentation,
  - Clean up debugging code,
  - Drop RFC state,

v4:
  - New.
---
 drivers/clk/shmobile/renesas-cpg-mssr.c | 587 ++++++++++++++++++++++++++++++++
 drivers/clk/shmobile/renesas-cpg-mssr.h | 131 +++++++
 2 files changed, 718 insertions(+)
 create mode 100644 drivers/clk/shmobile/renesas-cpg-mssr.c
 create mode 100644 drivers/clk/shmobile/renesas-cpg-mssr.h

diff --git a/drivers/clk/shmobile/renesas-cpg-mssr.c b/drivers/clk/shmobile/renesas-cpg-mssr.c
new file mode 100644
index 0000000000000000..e4382ba4e1e31aca
--- /dev/null
+++ b/drivers/clk/shmobile/renesas-cpg-mssr.c
@@ -0,0 +1,587 @@
+/*
+ * Renesas Clock Pulse Generator / Module Standby and Software Reset
+ *
+ * Copyright (C) 2015 Glider bvba
+ *
+ * Based on clk-mstp.c, clk-rcar-gen2.c, and clk-rcar-gen3.c
+ *
+ * Copyright (C) 2013 Ideas On Board SPRL
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_domain.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+#include "renesas-cpg-mssr.h"
+#include "clk-div6.h"
+
+#ifdef DEBUG
+#define WARN_DEBUG(x)	do { } while (0)
+#else
+#define WARN_DEBUG(x)	WARN_ON(x)
+#endif
+
+
+/*
+ * Module Standby and Software Reset register offets.
+ *
+ * If the registers exist, these are valid for SH-Mobile, R-Mobile,
+ * R-Car Gen 2, and R-Car Gen 3.
+ * These are NOT valid for R-Car Gen1 and RZ/A1!
+ */
+
+/*
+ * Module Stop Status Register offsets
+ */
+
+static const u16 mstpsr[] = {
+	0x030, 0x038, 0x040, 0x048, 0x04C, 0x03C, 0x1C0, 0x1C4,
+	0x9A0, 0x9A4, 0x9A8, 0x9AC,
+};
+
+#define	MSTPSR(i)	mstpsr[i]
+
+
+/*
+ * System Module Stop Control Register offsets
+ */
+
+static const u16 smstpcr[] = {
+	0x130, 0x134, 0x138, 0x13C, 0x140, 0x144, 0x148, 0x14C,
+	0x990, 0x994, 0x998, 0x99C,
+};
+
+#define	SMSTPCR(i)	smstpcr[i]
+
+
+/*
+ * Software Reset Register offsets
+ */
+
+static const u16 srcr[] = {
+	0x0A0, 0x0A8, 0x0B0, 0x0B8, 0x0BC, 0x0C4, 0x1C8, 0x1CC,
+	0x920, 0x924, 0x928, 0x92C,
+};
+
+#define	SRCR(i)		srcr[i]
+
+
+/* Realtime Module Stop Control Register offsets */
+#define RMSTPCR(i)	(smstpcr[i] - 0x20)
+
+/* Modem Module Stop Control Register offsets (r8a73a4) */
+#define MMSTPCR(i)	(smstpcr[i] + 0x20)
+
+/* Software Reset Clearing Register offsets */
+#define	SRSTCLR(i)	(0x940 + (i) * 4)
+
+
+/**
+ * Clock Pulse Generator / Module Standby and Software Reset Private Data
+ *
+ * @dev: CPG/MSSR device
+ * @base: CPG/MSSR register block base address
+ * @mstp_lock: protects writes to SMSTPCR
+ * @clks: Array containing all Core and Module Clocks
+ * @num_core_clks: Number of Core Clocks in clks[]
+ * @num_mod_clks: Number of Module Clocks in clks[]
+ * @last_dt_core_clk: ID of the last Core Clock exported to DT
+ */
+struct cpg_mssr_priv {
+	struct device *dev;
+	void __iomem *base;
+	spinlock_t mstp_lock;
+
+	struct clk **clks;
+	unsigned int num_core_clks;
+	unsigned int num_mod_clks;
+	unsigned int last_dt_core_clk;
+};
+
+
+/**
+ * struct mstp_clock - MSTP gating clock
+ * @hw: handle between common and hardware-specific interfaces
+ * @index: MSTP clock number
+ * @priv: CPG/MSSR private data
+ */
+struct mstp_clock {
+	struct clk_hw hw;
+	u32 index;
+	struct cpg_mssr_priv *priv;
+};
+
+#define to_mstp_clock(_hw) container_of(_hw, struct mstp_clock, hw)
+
+static int cpg_mstp_clock_endisable(struct clk_hw *hw, bool enable)
+{
+	struct mstp_clock *clock = to_mstp_clock(hw);
+	struct cpg_mssr_priv *priv = clock->priv;
+	unsigned int reg = clock->index / 32;
+	unsigned int bit = clock->index % 32;
+	struct device *dev = priv->dev;
+	u32 bitmask = BIT(bit);
+	unsigned long flags;
+	unsigned int i;
+	u32 value;
+
+	dev_dbg(dev, "MSTP %u%02u/%pC %s\n", reg, bit, hw->clk,
+		enable ? "ON" : "OFF");
+	spin_lock_irqsave(&priv->mstp_lock, flags);
+
+	value = clk_readl(priv->base + SMSTPCR(reg));
+	if (enable)
+		value &= ~bitmask;
+	else
+		value |= bitmask;
+	clk_writel(value, priv->base + SMSTPCR(reg));
+
+	spin_unlock_irqrestore(&priv->mstp_lock, flags);
+
+	if (!enable)
+		return 0;
+
+	for (i = 1000; i > 0; --i) {
+		if (!(clk_readl(priv->base + MSTPSR(reg)) &
+		      bitmask))
+			break;
+		cpu_relax();
+	}
+
+	if (!i) {
+		dev_err(dev, "Failed to enable SMSTP %p[%d]\n",
+			priv->base + SMSTPCR(reg), bit);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int cpg_mstp_clock_enable(struct clk_hw *hw)
+{
+	return cpg_mstp_clock_endisable(hw, true);
+}
+
+static void cpg_mstp_clock_disable(struct clk_hw *hw)
+{
+	cpg_mstp_clock_endisable(hw, false);
+}
+
+static int cpg_mstp_clock_is_enabled(struct clk_hw *hw)
+{
+	struct mstp_clock *clock = to_mstp_clock(hw);
+	struct cpg_mssr_priv *priv = clock->priv;
+	u32 value;
+
+	value = clk_readl(priv->base + MSTPSR(clock->index / 32));
+
+	return !(value & BIT(clock->index % 32));
+}
+
+static const struct clk_ops cpg_mstp_clock_ops = {
+	.enable = cpg_mstp_clock_enable,
+	.disable = cpg_mstp_clock_disable,
+	.is_enabled = cpg_mstp_clock_is_enabled,
+};
+
+static
+struct clk *cpg_mssr_clk_src_twocell_get(struct of_phandle_args *clkspec,
+					 void *data)
+{
+	unsigned int clkidx = clkspec->args[1];
+	struct cpg_mssr_priv *priv = data;
+	struct device *dev = priv->dev;
+	unsigned int idx;
+	const char *type;
+	struct clk *clk;
+
+	switch (clkspec->args[0]) {
+	case CPG_CORE:
+		type = "core";
+		if (clkidx > priv->last_dt_core_clk) {
+			dev_err(dev, "Invalid %s clock index %u\n", type,
+			       clkidx);
+			return ERR_PTR(-EINVAL);
+		}
+		clk = priv->clks[clkidx];
+		break;
+
+	case CPG_MOD:
+		type = "module";
+		idx = MOD_CLK_PACK(clkidx);
+		if (clkidx % 100 > 31 || idx >= priv->num_mod_clks) {
+			dev_err(dev, "Invalid %s clock index %u\n", type,
+				clkidx);
+			return ERR_PTR(-EINVAL);
+		}
+		clk = priv->clks[priv->num_core_clks + idx];
+		break;
+
+	default:
+		dev_err(dev, "Invalid CPG clock type %u\n", clkspec->args[0]);
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (IS_ERR(clk))
+		dev_err(dev, "Cannot get %s clock %u: %ld", type, clkidx,
+		       PTR_ERR(clk));
+	else
+		dev_dbg(dev, "clock (%u, %u) is %pC at %pCr Hz\n",
+			clkspec->args[0], clkspec->args[1], clk, clk);
+	return clk;
+}
+
+static void __init cpg_mssr_register_core_clk(const struct cpg_core_clk *core,
+					      const struct cpg_mssr_info *info,
+					      struct cpg_mssr_priv *priv)
+{
+	struct clk *clk = NULL, *parent;
+	struct device *dev = priv->dev;
+	unsigned int id = core->id;
+	const char *parent_name;
+
+	WARN_DEBUG(id >= priv->num_core_clks);
+	WARN_DEBUG(PTR_ERR(priv->clks[id]) != -ENOENT);
+
+	switch (core->type) {
+	case CLK_TYPE_IN:
+		clk = of_clk_get_by_name(priv->dev->of_node, core->name);
+		break;
+
+	case CLK_TYPE_FF:
+	case CLK_TYPE_DIV6P1:
+		WARN_DEBUG(core->parent >= priv->num_core_clks);
+		parent = priv->clks[core->parent];
+		if (IS_ERR(parent)) {
+			clk = parent;
+			goto fail;
+		}
+
+		parent_name = __clk_get_name(parent);
+		if (core->type = CLK_TYPE_FF) {
+			clk = clk_register_fixed_factor(NULL, core->name,
+							parent_name, 0,
+							core->mult, core->div);
+		} else {
+			clk = cpg_div6_register(core->name, 1, &parent_name,
+						priv->base + core->offset);
+		}
+		break;
+
+	default:
+		if (info->cpg_clk_register)
+			clk = info->cpg_clk_register(dev, core, info,
+						     priv->clks, priv->base);
+		else
+			dev_err(dev, "%s has unsupported core clock type %u\n",
+				core->name, core->type);
+		break;
+	}
+
+	if (IS_ERR_OR_NULL(clk))
+		goto fail;
+
+	dev_dbg(dev, "Core clock %pC at %pCr Hz\n", clk, clk);
+	priv->clks[id] = clk;
+	return;
+
+fail:
+	dev_err(dev, "Failed to register %s clock %s: %ld\n", "core,",
+		core->name, PTR_ERR(clk));
+}
+
+static void __init cpg_mssr_register_mod_clk(const struct mssr_mod_clk *mod,
+					     const struct cpg_mssr_info *info,
+					     struct cpg_mssr_priv *priv)
+{
+	struct mstp_clock *clock = NULL;
+	struct device *dev = priv->dev;
+	unsigned int id = mod->id;
+	struct clk_init_data init;
+	struct clk *parent, *clk;
+	const char *parent_name;
+	unsigned int i;
+
+	WARN_DEBUG(id < priv->num_core_clks);
+	WARN_DEBUG(id >= priv->num_core_clks + priv->num_mod_clks);
+	WARN_DEBUG(mod->parent >= priv->num_core_clks + priv->num_mod_clks);
+	WARN_DEBUG(PTR_ERR(priv->clks[id]) != -ENOENT);
+
+	parent = priv->clks[mod->parent];
+	if (IS_ERR(parent)) {
+		clk = parent;
+		goto fail;
+	}
+
+	clock = kzalloc(sizeof(*clock), GFP_KERNEL);
+	if (!clock) {
+		clk = ERR_PTR(-ENOMEM);
+		goto fail;
+	}
+
+	init.name = mod->name;
+	init.ops = &cpg_mstp_clock_ops;
+	init.flags = CLK_IS_BASIC | CLK_SET_RATE_PARENT;
+	for (i = 0; i < info->num_crit_mod_clks; i++)
+		if (id = info->crit_mod_clks[i]) {
+#ifdef CLK_ENABLE_HAND_OFF
+			dev_dbg(dev, "MSTP %s setting CLK_ENABLE_HAND_OFF\n",
+				mod->name);
+			init.flags |= CLK_ENABLE_HAND_OFF;
+			break;
+#else
+			dev_dbg(dev, "Ignoring MSTP %s to prevent disabling\n",
+				mod->name);
+			return;
+#endif
+		}
+
+	parent_name = __clk_get_name(parent);
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	clock->index = id - priv->num_core_clks;
+	clock->priv = priv;
+	clock->hw.init = &init;
+
+	clk = clk_register(NULL, &clock->hw);
+	if (IS_ERR(clk))
+		goto fail;
+
+	dev_dbg(dev, "Module clock %pC at %pCr Hz\n", clk, clk);
+	priv->clks[id] = clk;
+	return;
+
+fail:
+	dev_err(dev, "Failed to register %s clock %s: %ld\n", "module,",
+		mod->name, PTR_ERR(clk));
+	kfree(clock);
+}
+
+
+#ifdef CONFIG_PM_GENERIC_DOMAINS_OF
+struct cpg_mssr_clk_domain {
+	struct generic_pm_domain genpd;
+	struct device_node *np;
+	unsigned int num_core_pm_clks;
+	unsigned int core_pm_clks[0];
+};
+
+static bool cpg_mssr_is_pm_clk(const struct of_phandle_args *clkspec,
+			       struct cpg_mssr_clk_domain *pd)
+{
+	unsigned int i;
+
+	if (clkspec->np != pd->np || clkspec->args_count != 2)
+		return false;
+
+	switch (clkspec->args[0]) {
+	case CPG_CORE:
+		for (i = 0; i < pd->num_core_pm_clks; i++)
+			if (clkspec->args[1] = pd->core_pm_clks[i])
+				return true;
+		return false;
+
+	case CPG_MOD:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+static int cpg_mssr_attach_dev(struct generic_pm_domain *genpd,
+			       struct device *dev)
+{
+	struct cpg_mssr_clk_domain *pd +		container_of(genpd, struct cpg_mssr_clk_domain, genpd);
+	struct device_node *np = dev->of_node;
+	struct of_phandle_args clkspec;
+	struct clk *clk;
+	int i = 0;
+	int error;
+
+	while (!of_parse_phandle_with_args(np, "clocks", "#clock-cells", i,
+					   &clkspec)) {
+		if (cpg_mssr_is_pm_clk(&clkspec, pd))
+			goto found;
+
+		of_node_put(clkspec.np);
+		i++;
+	}
+
+	return 0;
+
+found:
+	clk = of_clk_get_from_provider(&clkspec);
+	of_node_put(clkspec.np);
+
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	error = pm_clk_create(dev);
+	if (error) {
+		dev_err(dev, "pm_clk_create failed %d\n", error);
+		goto fail_put;
+	}
+
+	error = pm_clk_add_clk(dev, clk);
+	if (error) {
+		dev_err(dev, "pm_clk_add_clk %pC failed %d\n", clk, error);
+		goto fail_destroy;
+	}
+
+	return 0;
+
+fail_destroy:
+	pm_clk_destroy(dev);
+fail_put:
+	clk_put(clk);
+	return error;
+}
+
+static void cpg_mssr_detach_dev(struct generic_pm_domain *genpd,
+				struct device *dev)
+{
+	if (!list_empty(&dev->power.subsys_data->clock_list))
+		pm_clk_destroy(dev);
+}
+
+static int __init cpg_mssr_add_clk_domain(struct device *dev,
+					  const unsigned int *core_pm_clks,
+					  unsigned int num_core_pm_clks)
+{
+	struct device_node *np = dev->of_node;
+	struct generic_pm_domain *genpd;
+	struct cpg_mssr_clk_domain *pd;
+	size_t pm_size = num_core_pm_clks * sizeof(core_pm_clks[0]);
+
+	pd = devm_kzalloc(dev, sizeof(*pd) + pm_size, GFP_KERNEL);
+	if (!pd)
+		return -ENOMEM;
+
+	pd->np = np;
+	pd->num_core_pm_clks = num_core_pm_clks;
+	memcpy(pd->core_pm_clks, core_pm_clks, pm_size);
+
+	genpd = &pd->genpd;
+	genpd->name = np->name;
+	genpd->flags = GENPD_FLAG_PM_CLK;
+	pm_genpd_init(genpd, &simple_qos_governor, false);
+	genpd->attach_dev = cpg_mssr_attach_dev;
+	genpd->detach_dev = cpg_mssr_detach_dev;
+
+	of_genpd_add_provider_simple(np, genpd);
+	return 0;
+}
+#else
+static inline int cpg_mssr_add_clk_domain(struct device *dev,
+					  const unsigned int *core_pm_clks,
+					  unsigned int num_core_pm_clks) {}
+#endif /* !CONFIG_PM_GENERIC_DOMAINS_OF */
+
+
+static const struct of_device_id cpg_mssr_match[] = {
+	{ /* sentinel */ }
+};
+
+static void cpg_mssr_del_clk_provider(void *data)
+{
+	of_clk_del_provider(data);
+}
+
+static int __init cpg_mssr_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	const struct cpg_mssr_info *info;
+	struct cpg_mssr_priv *priv;
+	unsigned int nclks, i;
+	struct resource *res;
+	struct clk **clks;
+	int error;
+
+	info = of_match_node(cpg_mssr_match, np)->data;
+	if (info->init) {
+		error = info->init(dev);
+		if (error)
+			return error;
+	}
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	spin_lock_init(&priv->mstp_lock);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	nclks = info->num_total_core_clks + info->num_hw_mod_clks;
+	clks = devm_kmalloc_array(dev, nclks, sizeof(*clks), GFP_KERNEL);
+	if (!clks)
+		return -ENOMEM;
+
+	priv->clks = clks;
+	priv->num_core_clks = info->num_total_core_clks;
+	priv->num_mod_clks = info->num_hw_mod_clks;
+	priv->last_dt_core_clk = info->last_dt_core_clk;
+
+	for (i = 0; i < nclks; i++)
+		clks[i] = ERR_PTR(-ENOENT);
+
+	for (i = 0; i < info->num_core_clks; i++)
+		cpg_mssr_register_core_clk(&info->core_clks[i], info, priv);
+
+	for (i = 0; i < info->num_mod_clks; i++)
+		cpg_mssr_register_mod_clk(&info->mod_clks[i], info, priv);
+
+	error = of_clk_add_provider(np, cpg_mssr_clk_src_twocell_get, priv);
+	if (error)
+		return error;
+
+	devm_add_action(dev, cpg_mssr_del_clk_provider, np);
+
+	error = cpg_mssr_add_clk_domain(dev, info->core_pm_clks,
+					info->num_core_pm_clks);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static struct platform_driver cpg_mssr_driver = {
+	.driver		= {
+		.name	= "renesas-cpg-mssr",
+		.of_match_table = cpg_mssr_match,
+	},
+};
+
+static int __init cpg_mssr_init(void)
+{
+	return platform_driver_probe(&cpg_mssr_driver, cpg_mssr_probe);
+}
+
+subsys_initcall(cpg_mssr_init);
+
+MODULE_DESCRIPTION("Renesas CPG/MSSR Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clk/shmobile/renesas-cpg-mssr.h b/drivers/clk/shmobile/renesas-cpg-mssr.h
new file mode 100644
index 0000000000000000..e6d24875b56f7755
--- /dev/null
+++ b/drivers/clk/shmobile/renesas-cpg-mssr.h
@@ -0,0 +1,131 @@
+/*
+ * Renesas Clock Pulse Generator / Module Standby and Software Reset
+ *
+ * Copyright (C) 2015 Glider bvba
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#ifndef __CLK_RENESAS_CPG_MSSR_H__
+#define __CLK_RENESAS_CPG_MSSR_H__
+
+    /*
+     * Definitions of CPG Core Clocks
+     *
+     * These include:
+     *   - Clock outputs exported to DT
+     *   - External input clocks
+     *   - Internal CPG clocks
+     */
+
+struct cpg_core_clk {
+	/* Common */
+	const char *name;
+	unsigned int id;
+	unsigned int type;
+	/* Depending on type */
+	unsigned int parent;	/* Core Clocks only */
+	unsigned int div;
+	unsigned int mult;
+	unsigned int offset;
+};
+
+enum clk_types {
+	/* Generic */
+	CLK_TYPE_IN,		/* External Clock Input */
+	CLK_TYPE_FF,		/* Fixed Factor Clock */
+	CLK_TYPE_DIV6P1,	/* DIV6 Clock with 1 parent clock */
+
+	/* Custom definitions start here */
+	CLK_TYPE_CUSTOM,
+};
+
+#define DEF_TYPE(_name, _id, _type...)	\
+	{ .name = _name, .id = _id, .type = _type }
+#define DEF_BASE(_name, _id, _type, _parent...)	\
+	DEF_TYPE(_name, _id, _type, .parent = _parent)
+
+#define DEF_INPUT(_name, _id) \
+	DEF_TYPE(_name, _id, CLK_TYPE_IN)
+#define DEF_FIXED(_name, _id, _parent, _div, _mult)	\
+	DEF_BASE(_name, _id, CLK_TYPE_FF, _parent, .div = _div, .mult = _mult)
+#define DEF_DIV6P1(_name, _id, _parent, _offset)	\
+	DEF_BASE(_name, _id, CLK_TYPE_DIV6P1, _parent, .offset = _offset)
+
+
+    /*
+     * Definitions of Module Clocks
+     */
+
+struct mssr_mod_clk {
+	const char *name;
+	unsigned int id;
+	unsigned int parent;	/* Add MOD_CLK_BASE for Module Clocks */
+};
+
+/* Convert from sparse base-100 to packed index space */
+#define MOD_CLK_PACK(x)	((x) - ((x) / 100) * (100 - 32))
+
+#define MOD_CLK_ID(x)	(MOD_CLK_BASE + MOD_CLK_PACK(x))
+
+#define DEF_MOD(_name, _mod, _parent...)	\
+	{ .name = _name, .id = MOD_CLK_ID(_mod), .parent = _parent }
+
+
+struct device_node;
+
+    /**
+     * SoC-specific CPG/MSSR Description
+     *
+     * @core_clks: Array of Core Clock definitions
+     * @num_core_clks: Number of entries in core_clks[]
+     * @last_dt_core_clk: ID of the last Core Clock exported to DT
+     * @num_total_core_clks: Total number of Core Clocks (exported + internal)
+     *
+     * @mod_clks: Array of Module Clock definitions
+     * @num_mod_clks: Number of entries in mod_clks[]
+     * @num_hw_mod_clks: Number of Module Clocks supported by the hardware
+     *
+     * @crit_mod_clks: Array with Module Clock IDs of critical clocks that
+     *                 should not be disabled without a knowledgeable driver
+     * @num_crit_mod_clks: Number of entries in crit_mod_clks[]
+     *
+     * @core_pm_clks: Array with IDs of Core Clocks that are suitable for Power
+     *                Management, in addition to Module Clocks
+     * @num_core_pm_clks: Number of entries in core_pm_clks[]
+     *
+     * @init: Optional callback to perform SoC-specific initialization
+     * @cpg_clk_register: Optional callback to handle special Core Clock types
+     */
+
+struct cpg_mssr_info {
+	/* Core Clocks */
+	const struct cpg_core_clk *core_clks;
+	unsigned int num_core_clks;
+	unsigned int last_dt_core_clk;
+	unsigned int num_total_core_clks;
+
+	/* Module Clocks */
+	const struct mssr_mod_clk *mod_clks;
+	unsigned int num_mod_clks;
+	unsigned int num_hw_mod_clks;
+
+	/* Critical Module Clocks that should not be disabled */
+	const unsigned int *crit_mod_clks;
+	unsigned int num_crit_mod_clks;
+
+	/* Core Clocks suitable for PM, in addition to the Module Clocks */
+	const unsigned int *core_pm_clks;
+	unsigned int num_core_pm_clks;
+
+	/* Callbacks */
+	int (*init)(struct device *dev);
+	struct clk *(*cpg_clk_register)(struct device *dev,
+					const struct cpg_core_clk *core,
+					const struct cpg_mssr_info *info,
+					struct clk **clks, void __iomem *base);
+};
+
+#endif
-- 
1.9.1


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [PATCH v6 4/5] clk: shmobile: Add new CPG/MSSR driver core
@ 2015-11-12 15:54   ` Geert Uytterhoeven
  0 siblings, 0 replies; 20+ messages in thread
From: Geert Uytterhoeven @ 2015-11-12 15:54 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Magnus Damm, Simon Horman,
	Laurent Pinchart
  Cc: linux-clk, linux-sh, linux-kernel, Geert Uytterhoeven

Add the common core for the new Renesas Clock Pulse Generator / Module
Standby and Software Reset driver.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v6:
  - No changes,

v5:
  - Convert from CLK_OF_DECLARE() to a real platform_driver, initialized
    using platform_driver_probe() from subsys_initcall().
    Note that arch_initcall() would be OK for arm32, but not for arm64:
      - arm32 calls of_platform_populate() from arch_initcall(),
      - arm64 calls of_platform_populate() from arch_initcall_sync().
  - Implement handling of core clocks that are suitable for power
    management (not needed for R-Car, but useful for SH-Mobile AG5 and
    R-Mobile APE6),
  - Add cpg_mssr_info.init(), as initialization is now done from the
    core driver,
  - Move conversion from Module Clock numbers to IDs from run time (C
    code) to compile time (CPP macros for filling in tables),
  - Unify some code to handle CLK_TYPE_IN and CLK_TYPE_FF,
  - Rename from clk-cpg-mssr to renesas-cpg-mssr,
  - Add include guards to clk-cpg-mssr.h,
  - Improve struct documentation,
  - Clean up debugging code,
  - Drop RFC state,

v4:
  - New.
---
 drivers/clk/shmobile/renesas-cpg-mssr.c | 587 ++++++++++++++++++++++++++++++++
 drivers/clk/shmobile/renesas-cpg-mssr.h | 131 +++++++
 2 files changed, 718 insertions(+)
 create mode 100644 drivers/clk/shmobile/renesas-cpg-mssr.c
 create mode 100644 drivers/clk/shmobile/renesas-cpg-mssr.h

diff --git a/drivers/clk/shmobile/renesas-cpg-mssr.c b/drivers/clk/shmobile/renesas-cpg-mssr.c
new file mode 100644
index 0000000000000000..e4382ba4e1e31aca
--- /dev/null
+++ b/drivers/clk/shmobile/renesas-cpg-mssr.c
@@ -0,0 +1,587 @@
+/*
+ * Renesas Clock Pulse Generator / Module Standby and Software Reset
+ *
+ * Copyright (C) 2015 Glider bvba
+ *
+ * Based on clk-mstp.c, clk-rcar-gen2.c, and clk-rcar-gen3.c
+ *
+ * Copyright (C) 2013 Ideas On Board SPRL
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_domain.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+#include "renesas-cpg-mssr.h"
+#include "clk-div6.h"
+
+#ifdef DEBUG
+#define WARN_DEBUG(x)	do { } while (0)
+#else
+#define WARN_DEBUG(x)	WARN_ON(x)
+#endif
+
+
+/*
+ * Module Standby and Software Reset register offets.
+ *
+ * If the registers exist, these are valid for SH-Mobile, R-Mobile,
+ * R-Car Gen 2, and R-Car Gen 3.
+ * These are NOT valid for R-Car Gen1 and RZ/A1!
+ */
+
+/*
+ * Module Stop Status Register offsets
+ */
+
+static const u16 mstpsr[] = {
+	0x030, 0x038, 0x040, 0x048, 0x04C, 0x03C, 0x1C0, 0x1C4,
+	0x9A0, 0x9A4, 0x9A8, 0x9AC,
+};
+
+#define	MSTPSR(i)	mstpsr[i]
+
+
+/*
+ * System Module Stop Control Register offsets
+ */
+
+static const u16 smstpcr[] = {
+	0x130, 0x134, 0x138, 0x13C, 0x140, 0x144, 0x148, 0x14C,
+	0x990, 0x994, 0x998, 0x99C,
+};
+
+#define	SMSTPCR(i)	smstpcr[i]
+
+
+/*
+ * Software Reset Register offsets
+ */
+
+static const u16 srcr[] = {
+	0x0A0, 0x0A8, 0x0B0, 0x0B8, 0x0BC, 0x0C4, 0x1C8, 0x1CC,
+	0x920, 0x924, 0x928, 0x92C,
+};
+
+#define	SRCR(i)		srcr[i]
+
+
+/* Realtime Module Stop Control Register offsets */
+#define RMSTPCR(i)	(smstpcr[i] - 0x20)
+
+/* Modem Module Stop Control Register offsets (r8a73a4) */
+#define MMSTPCR(i)	(smstpcr[i] + 0x20)
+
+/* Software Reset Clearing Register offsets */
+#define	SRSTCLR(i)	(0x940 + (i) * 4)
+
+
+/**
+ * Clock Pulse Generator / Module Standby and Software Reset Private Data
+ *
+ * @dev: CPG/MSSR device
+ * @base: CPG/MSSR register block base address
+ * @mstp_lock: protects writes to SMSTPCR
+ * @clks: Array containing all Core and Module Clocks
+ * @num_core_clks: Number of Core Clocks in clks[]
+ * @num_mod_clks: Number of Module Clocks in clks[]
+ * @last_dt_core_clk: ID of the last Core Clock exported to DT
+ */
+struct cpg_mssr_priv {
+	struct device *dev;
+	void __iomem *base;
+	spinlock_t mstp_lock;
+
+	struct clk **clks;
+	unsigned int num_core_clks;
+	unsigned int num_mod_clks;
+	unsigned int last_dt_core_clk;
+};
+
+
+/**
+ * struct mstp_clock - MSTP gating clock
+ * @hw: handle between common and hardware-specific interfaces
+ * @index: MSTP clock number
+ * @priv: CPG/MSSR private data
+ */
+struct mstp_clock {
+	struct clk_hw hw;
+	u32 index;
+	struct cpg_mssr_priv *priv;
+};
+
+#define to_mstp_clock(_hw) container_of(_hw, struct mstp_clock, hw)
+
+static int cpg_mstp_clock_endisable(struct clk_hw *hw, bool enable)
+{
+	struct mstp_clock *clock = to_mstp_clock(hw);
+	struct cpg_mssr_priv *priv = clock->priv;
+	unsigned int reg = clock->index / 32;
+	unsigned int bit = clock->index % 32;
+	struct device *dev = priv->dev;
+	u32 bitmask = BIT(bit);
+	unsigned long flags;
+	unsigned int i;
+	u32 value;
+
+	dev_dbg(dev, "MSTP %u%02u/%pC %s\n", reg, bit, hw->clk,
+		enable ? "ON" : "OFF");
+	spin_lock_irqsave(&priv->mstp_lock, flags);
+
+	value = clk_readl(priv->base + SMSTPCR(reg));
+	if (enable)
+		value &= ~bitmask;
+	else
+		value |= bitmask;
+	clk_writel(value, priv->base + SMSTPCR(reg));
+
+	spin_unlock_irqrestore(&priv->mstp_lock, flags);
+
+	if (!enable)
+		return 0;
+
+	for (i = 1000; i > 0; --i) {
+		if (!(clk_readl(priv->base + MSTPSR(reg)) &
+		      bitmask))
+			break;
+		cpu_relax();
+	}
+
+	if (!i) {
+		dev_err(dev, "Failed to enable SMSTP %p[%d]\n",
+			priv->base + SMSTPCR(reg), bit);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int cpg_mstp_clock_enable(struct clk_hw *hw)
+{
+	return cpg_mstp_clock_endisable(hw, true);
+}
+
+static void cpg_mstp_clock_disable(struct clk_hw *hw)
+{
+	cpg_mstp_clock_endisable(hw, false);
+}
+
+static int cpg_mstp_clock_is_enabled(struct clk_hw *hw)
+{
+	struct mstp_clock *clock = to_mstp_clock(hw);
+	struct cpg_mssr_priv *priv = clock->priv;
+	u32 value;
+
+	value = clk_readl(priv->base + MSTPSR(clock->index / 32));
+
+	return !(value & BIT(clock->index % 32));
+}
+
+static const struct clk_ops cpg_mstp_clock_ops = {
+	.enable = cpg_mstp_clock_enable,
+	.disable = cpg_mstp_clock_disable,
+	.is_enabled = cpg_mstp_clock_is_enabled,
+};
+
+static
+struct clk *cpg_mssr_clk_src_twocell_get(struct of_phandle_args *clkspec,
+					 void *data)
+{
+	unsigned int clkidx = clkspec->args[1];
+	struct cpg_mssr_priv *priv = data;
+	struct device *dev = priv->dev;
+	unsigned int idx;
+	const char *type;
+	struct clk *clk;
+
+	switch (clkspec->args[0]) {
+	case CPG_CORE:
+		type = "core";
+		if (clkidx > priv->last_dt_core_clk) {
+			dev_err(dev, "Invalid %s clock index %u\n", type,
+			       clkidx);
+			return ERR_PTR(-EINVAL);
+		}
+		clk = priv->clks[clkidx];
+		break;
+
+	case CPG_MOD:
+		type = "module";
+		idx = MOD_CLK_PACK(clkidx);
+		if (clkidx % 100 > 31 || idx >= priv->num_mod_clks) {
+			dev_err(dev, "Invalid %s clock index %u\n", type,
+				clkidx);
+			return ERR_PTR(-EINVAL);
+		}
+		clk = priv->clks[priv->num_core_clks + idx];
+		break;
+
+	default:
+		dev_err(dev, "Invalid CPG clock type %u\n", clkspec->args[0]);
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (IS_ERR(clk))
+		dev_err(dev, "Cannot get %s clock %u: %ld", type, clkidx,
+		       PTR_ERR(clk));
+	else
+		dev_dbg(dev, "clock (%u, %u) is %pC at %pCr Hz\n",
+			clkspec->args[0], clkspec->args[1], clk, clk);
+	return clk;
+}
+
+static void __init cpg_mssr_register_core_clk(const struct cpg_core_clk *core,
+					      const struct cpg_mssr_info *info,
+					      struct cpg_mssr_priv *priv)
+{
+	struct clk *clk = NULL, *parent;
+	struct device *dev = priv->dev;
+	unsigned int id = core->id;
+	const char *parent_name;
+
+	WARN_DEBUG(id >= priv->num_core_clks);
+	WARN_DEBUG(PTR_ERR(priv->clks[id]) != -ENOENT);
+
+	switch (core->type) {
+	case CLK_TYPE_IN:
+		clk = of_clk_get_by_name(priv->dev->of_node, core->name);
+		break;
+
+	case CLK_TYPE_FF:
+	case CLK_TYPE_DIV6P1:
+		WARN_DEBUG(core->parent >= priv->num_core_clks);
+		parent = priv->clks[core->parent];
+		if (IS_ERR(parent)) {
+			clk = parent;
+			goto fail;
+		}
+
+		parent_name = __clk_get_name(parent);
+		if (core->type == CLK_TYPE_FF) {
+			clk = clk_register_fixed_factor(NULL, core->name,
+							parent_name, 0,
+							core->mult, core->div);
+		} else {
+			clk = cpg_div6_register(core->name, 1, &parent_name,
+						priv->base + core->offset);
+		}
+		break;
+
+	default:
+		if (info->cpg_clk_register)
+			clk = info->cpg_clk_register(dev, core, info,
+						     priv->clks, priv->base);
+		else
+			dev_err(dev, "%s has unsupported core clock type %u\n",
+				core->name, core->type);
+		break;
+	}
+
+	if (IS_ERR_OR_NULL(clk))
+		goto fail;
+
+	dev_dbg(dev, "Core clock %pC at %pCr Hz\n", clk, clk);
+	priv->clks[id] = clk;
+	return;
+
+fail:
+	dev_err(dev, "Failed to register %s clock %s: %ld\n", "core,",
+		core->name, PTR_ERR(clk));
+}
+
+static void __init cpg_mssr_register_mod_clk(const struct mssr_mod_clk *mod,
+					     const struct cpg_mssr_info *info,
+					     struct cpg_mssr_priv *priv)
+{
+	struct mstp_clock *clock = NULL;
+	struct device *dev = priv->dev;
+	unsigned int id = mod->id;
+	struct clk_init_data init;
+	struct clk *parent, *clk;
+	const char *parent_name;
+	unsigned int i;
+
+	WARN_DEBUG(id < priv->num_core_clks);
+	WARN_DEBUG(id >= priv->num_core_clks + priv->num_mod_clks);
+	WARN_DEBUG(mod->parent >= priv->num_core_clks + priv->num_mod_clks);
+	WARN_DEBUG(PTR_ERR(priv->clks[id]) != -ENOENT);
+
+	parent = priv->clks[mod->parent];
+	if (IS_ERR(parent)) {
+		clk = parent;
+		goto fail;
+	}
+
+	clock = kzalloc(sizeof(*clock), GFP_KERNEL);
+	if (!clock) {
+		clk = ERR_PTR(-ENOMEM);
+		goto fail;
+	}
+
+	init.name = mod->name;
+	init.ops = &cpg_mstp_clock_ops;
+	init.flags = CLK_IS_BASIC | CLK_SET_RATE_PARENT;
+	for (i = 0; i < info->num_crit_mod_clks; i++)
+		if (id == info->crit_mod_clks[i]) {
+#ifdef CLK_ENABLE_HAND_OFF
+			dev_dbg(dev, "MSTP %s setting CLK_ENABLE_HAND_OFF\n",
+				mod->name);
+			init.flags |= CLK_ENABLE_HAND_OFF;
+			break;
+#else
+			dev_dbg(dev, "Ignoring MSTP %s to prevent disabling\n",
+				mod->name);
+			return;
+#endif
+		}
+
+	parent_name = __clk_get_name(parent);
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	clock->index = id - priv->num_core_clks;
+	clock->priv = priv;
+	clock->hw.init = &init;
+
+	clk = clk_register(NULL, &clock->hw);
+	if (IS_ERR(clk))
+		goto fail;
+
+	dev_dbg(dev, "Module clock %pC at %pCr Hz\n", clk, clk);
+	priv->clks[id] = clk;
+	return;
+
+fail:
+	dev_err(dev, "Failed to register %s clock %s: %ld\n", "module,",
+		mod->name, PTR_ERR(clk));
+	kfree(clock);
+}
+
+
+#ifdef CONFIG_PM_GENERIC_DOMAINS_OF
+struct cpg_mssr_clk_domain {
+	struct generic_pm_domain genpd;
+	struct device_node *np;
+	unsigned int num_core_pm_clks;
+	unsigned int core_pm_clks[0];
+};
+
+static bool cpg_mssr_is_pm_clk(const struct of_phandle_args *clkspec,
+			       struct cpg_mssr_clk_domain *pd)
+{
+	unsigned int i;
+
+	if (clkspec->np != pd->np || clkspec->args_count != 2)
+		return false;
+
+	switch (clkspec->args[0]) {
+	case CPG_CORE:
+		for (i = 0; i < pd->num_core_pm_clks; i++)
+			if (clkspec->args[1] == pd->core_pm_clks[i])
+				return true;
+		return false;
+
+	case CPG_MOD:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+static int cpg_mssr_attach_dev(struct generic_pm_domain *genpd,
+			       struct device *dev)
+{
+	struct cpg_mssr_clk_domain *pd =
+		container_of(genpd, struct cpg_mssr_clk_domain, genpd);
+	struct device_node *np = dev->of_node;
+	struct of_phandle_args clkspec;
+	struct clk *clk;
+	int i = 0;
+	int error;
+
+	while (!of_parse_phandle_with_args(np, "clocks", "#clock-cells", i,
+					   &clkspec)) {
+		if (cpg_mssr_is_pm_clk(&clkspec, pd))
+			goto found;
+
+		of_node_put(clkspec.np);
+		i++;
+	}
+
+	return 0;
+
+found:
+	clk = of_clk_get_from_provider(&clkspec);
+	of_node_put(clkspec.np);
+
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	error = pm_clk_create(dev);
+	if (error) {
+		dev_err(dev, "pm_clk_create failed %d\n", error);
+		goto fail_put;
+	}
+
+	error = pm_clk_add_clk(dev, clk);
+	if (error) {
+		dev_err(dev, "pm_clk_add_clk %pC failed %d\n", clk, error);
+		goto fail_destroy;
+	}
+
+	return 0;
+
+fail_destroy:
+	pm_clk_destroy(dev);
+fail_put:
+	clk_put(clk);
+	return error;
+}
+
+static void cpg_mssr_detach_dev(struct generic_pm_domain *genpd,
+				struct device *dev)
+{
+	if (!list_empty(&dev->power.subsys_data->clock_list))
+		pm_clk_destroy(dev);
+}
+
+static int __init cpg_mssr_add_clk_domain(struct device *dev,
+					  const unsigned int *core_pm_clks,
+					  unsigned int num_core_pm_clks)
+{
+	struct device_node *np = dev->of_node;
+	struct generic_pm_domain *genpd;
+	struct cpg_mssr_clk_domain *pd;
+	size_t pm_size = num_core_pm_clks * sizeof(core_pm_clks[0]);
+
+	pd = devm_kzalloc(dev, sizeof(*pd) + pm_size, GFP_KERNEL);
+	if (!pd)
+		return -ENOMEM;
+
+	pd->np = np;
+	pd->num_core_pm_clks = num_core_pm_clks;
+	memcpy(pd->core_pm_clks, core_pm_clks, pm_size);
+
+	genpd = &pd->genpd;
+	genpd->name = np->name;
+	genpd->flags = GENPD_FLAG_PM_CLK;
+	pm_genpd_init(genpd, &simple_qos_governor, false);
+	genpd->attach_dev = cpg_mssr_attach_dev;
+	genpd->detach_dev = cpg_mssr_detach_dev;
+
+	of_genpd_add_provider_simple(np, genpd);
+	return 0;
+}
+#else
+static inline int cpg_mssr_add_clk_domain(struct device *dev,
+					  const unsigned int *core_pm_clks,
+					  unsigned int num_core_pm_clks) {}
+#endif /* !CONFIG_PM_GENERIC_DOMAINS_OF */
+
+
+static const struct of_device_id cpg_mssr_match[] = {
+	{ /* sentinel */ }
+};
+
+static void cpg_mssr_del_clk_provider(void *data)
+{
+	of_clk_del_provider(data);
+}
+
+static int __init cpg_mssr_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	const struct cpg_mssr_info *info;
+	struct cpg_mssr_priv *priv;
+	unsigned int nclks, i;
+	struct resource *res;
+	struct clk **clks;
+	int error;
+
+	info = of_match_node(cpg_mssr_match, np)->data;
+	if (info->init) {
+		error = info->init(dev);
+		if (error)
+			return error;
+	}
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	spin_lock_init(&priv->mstp_lock);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	nclks = info->num_total_core_clks + info->num_hw_mod_clks;
+	clks = devm_kmalloc_array(dev, nclks, sizeof(*clks), GFP_KERNEL);
+	if (!clks)
+		return -ENOMEM;
+
+	priv->clks = clks;
+	priv->num_core_clks = info->num_total_core_clks;
+	priv->num_mod_clks = info->num_hw_mod_clks;
+	priv->last_dt_core_clk = info->last_dt_core_clk;
+
+	for (i = 0; i < nclks; i++)
+		clks[i] = ERR_PTR(-ENOENT);
+
+	for (i = 0; i < info->num_core_clks; i++)
+		cpg_mssr_register_core_clk(&info->core_clks[i], info, priv);
+
+	for (i = 0; i < info->num_mod_clks; i++)
+		cpg_mssr_register_mod_clk(&info->mod_clks[i], info, priv);
+
+	error = of_clk_add_provider(np, cpg_mssr_clk_src_twocell_get, priv);
+	if (error)
+		return error;
+
+	devm_add_action(dev, cpg_mssr_del_clk_provider, np);
+
+	error = cpg_mssr_add_clk_domain(dev, info->core_pm_clks,
+					info->num_core_pm_clks);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static struct platform_driver cpg_mssr_driver = {
+	.driver		= {
+		.name	= "renesas-cpg-mssr",
+		.of_match_table = cpg_mssr_match,
+	},
+};
+
+static int __init cpg_mssr_init(void)
+{
+	return platform_driver_probe(&cpg_mssr_driver, cpg_mssr_probe);
+}
+
+subsys_initcall(cpg_mssr_init);
+
+MODULE_DESCRIPTION("Renesas CPG/MSSR Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clk/shmobile/renesas-cpg-mssr.h b/drivers/clk/shmobile/renesas-cpg-mssr.h
new file mode 100644
index 0000000000000000..e6d24875b56f7755
--- /dev/null
+++ b/drivers/clk/shmobile/renesas-cpg-mssr.h
@@ -0,0 +1,131 @@
+/*
+ * Renesas Clock Pulse Generator / Module Standby and Software Reset
+ *
+ * Copyright (C) 2015 Glider bvba
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#ifndef __CLK_RENESAS_CPG_MSSR_H__
+#define __CLK_RENESAS_CPG_MSSR_H__
+
+    /*
+     * Definitions of CPG Core Clocks
+     *
+     * These include:
+     *   - Clock outputs exported to DT
+     *   - External input clocks
+     *   - Internal CPG clocks
+     */
+
+struct cpg_core_clk {
+	/* Common */
+	const char *name;
+	unsigned int id;
+	unsigned int type;
+	/* Depending on type */
+	unsigned int parent;	/* Core Clocks only */
+	unsigned int div;
+	unsigned int mult;
+	unsigned int offset;
+};
+
+enum clk_types {
+	/* Generic */
+	CLK_TYPE_IN,		/* External Clock Input */
+	CLK_TYPE_FF,		/* Fixed Factor Clock */
+	CLK_TYPE_DIV6P1,	/* DIV6 Clock with 1 parent clock */
+
+	/* Custom definitions start here */
+	CLK_TYPE_CUSTOM,
+};
+
+#define DEF_TYPE(_name, _id, _type...)	\
+	{ .name = _name, .id = _id, .type = _type }
+#define DEF_BASE(_name, _id, _type, _parent...)	\
+	DEF_TYPE(_name, _id, _type, .parent = _parent)
+
+#define DEF_INPUT(_name, _id) \
+	DEF_TYPE(_name, _id, CLK_TYPE_IN)
+#define DEF_FIXED(_name, _id, _parent, _div, _mult)	\
+	DEF_BASE(_name, _id, CLK_TYPE_FF, _parent, .div = _div, .mult = _mult)
+#define DEF_DIV6P1(_name, _id, _parent, _offset)	\
+	DEF_BASE(_name, _id, CLK_TYPE_DIV6P1, _parent, .offset = _offset)
+
+
+    /*
+     * Definitions of Module Clocks
+     */
+
+struct mssr_mod_clk {
+	const char *name;
+	unsigned int id;
+	unsigned int parent;	/* Add MOD_CLK_BASE for Module Clocks */
+};
+
+/* Convert from sparse base-100 to packed index space */
+#define MOD_CLK_PACK(x)	((x) - ((x) / 100) * (100 - 32))
+
+#define MOD_CLK_ID(x)	(MOD_CLK_BASE + MOD_CLK_PACK(x))
+
+#define DEF_MOD(_name, _mod, _parent...)	\
+	{ .name = _name, .id = MOD_CLK_ID(_mod), .parent = _parent }
+
+
+struct device_node;
+
+    /**
+     * SoC-specific CPG/MSSR Description
+     *
+     * @core_clks: Array of Core Clock definitions
+     * @num_core_clks: Number of entries in core_clks[]
+     * @last_dt_core_clk: ID of the last Core Clock exported to DT
+     * @num_total_core_clks: Total number of Core Clocks (exported + internal)
+     *
+     * @mod_clks: Array of Module Clock definitions
+     * @num_mod_clks: Number of entries in mod_clks[]
+     * @num_hw_mod_clks: Number of Module Clocks supported by the hardware
+     *
+     * @crit_mod_clks: Array with Module Clock IDs of critical clocks that
+     *                 should not be disabled without a knowledgeable driver
+     * @num_crit_mod_clks: Number of entries in crit_mod_clks[]
+     *
+     * @core_pm_clks: Array with IDs of Core Clocks that are suitable for Power
+     *                Management, in addition to Module Clocks
+     * @num_core_pm_clks: Number of entries in core_pm_clks[]
+     *
+     * @init: Optional callback to perform SoC-specific initialization
+     * @cpg_clk_register: Optional callback to handle special Core Clock types
+     */
+
+struct cpg_mssr_info {
+	/* Core Clocks */
+	const struct cpg_core_clk *core_clks;
+	unsigned int num_core_clks;
+	unsigned int last_dt_core_clk;
+	unsigned int num_total_core_clks;
+
+	/* Module Clocks */
+	const struct mssr_mod_clk *mod_clks;
+	unsigned int num_mod_clks;
+	unsigned int num_hw_mod_clks;
+
+	/* Critical Module Clocks that should not be disabled */
+	const unsigned int *crit_mod_clks;
+	unsigned int num_crit_mod_clks;
+
+	/* Core Clocks suitable for PM, in addition to the Module Clocks */
+	const unsigned int *core_pm_clks;
+	unsigned int num_core_pm_clks;
+
+	/* Callbacks */
+	int (*init)(struct device *dev);
+	struct clk *(*cpg_clk_register)(struct device *dev,
+					const struct cpg_core_clk *core,
+					const struct cpg_mssr_info *info,
+					struct clk **clks, void __iomem *base);
+};
+
+#endif
-- 
1.9.1


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [PATCH v6 5/5] clk: shmobile: r8a7795: Add new CPG/MSSR driver
  2015-11-12 15:54 ` Geert Uytterhoeven
@ 2015-11-12 15:54   ` Geert Uytterhoeven
  -1 siblings, 0 replies; 20+ messages in thread
From: Geert Uytterhoeven @ 2015-11-12 15:54 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Magnus Damm, Simon Horman,
	Laurent Pinchart
  Cc: linux-clk, linux-sh, linux-kernel, Geert Uytterhoeven

Add a new R-Car H3 Clock Pulse Generator / Module Standby and Software
Reset driver, using the new CPG/MSSR driver core.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v6:
  - Correct PLL1 and PLL3 multipliers from 156 to 160[*],
  - Correct CPG_PLL0CR multiplier factor from x1 to x2, and multiplier
    mask from 0x3f to 0x7f (.pll0: 217 MHz => 1500 MHz),
  - Correct CPG_PLL2CR multiplier factor from x1 to x2[*], and
    multiplier mask from 0x3f to 0x7f (.pll2: 67 MHz => 1200 MHz),
  - Add and use CPG_PLL4CR for PLL4 instead of using the fixed value in
    cpg_pll_configs[],
  - Tidy up cpg_pll_configs[],
  - Add PCIe module clocks (from Phil Edworthy
    <phil.edworthy@renesas.com>),

    [*] Fixes from Manual Errata for Rev 0.50 of the R-Car Gen3
	datasheet.

v5:
  - Convert to real platform_driver,
  - Drop dependency on undocumented "renesas,modemr" property,
  - Move conversion from Module Clock numbers to IDs from run time (C
    code) to compile time (CPP macros for filling in tables),
  - Rename driver from clk-r8a7795-cpg-mssr to r8a7795-cpg-mssr,
  - Enter shmobile subdir if CONFIG_ARCH_RENESAS=y,
  - Clean up debugging code,
  - Drop RFC state,

v4:
  - New.
---
 drivers/clk/Makefile                    |   1 +
 drivers/clk/shmobile/Makefile           |   2 +
 drivers/clk/shmobile/r8a7795-cpg-mssr.c | 382 ++++++++++++++++++++++++++++++++
 drivers/clk/shmobile/renesas-cpg-mssr.c |   6 +
 drivers/clk/shmobile/renesas-cpg-mssr.h |   1 +
 5 files changed, 392 insertions(+)
 create mode 100644 drivers/clk/shmobile/r8a7795-cpg-mssr.c

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index d3e1910eebaba6ed..8cf50f9554318d2b 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -68,6 +68,7 @@ obj-$(CONFIG_COMMON_CLK_QCOM)		+= qcom/
 obj-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip/
 obj-$(CONFIG_COMMON_CLK_SAMSUNG)	+= samsung/
 obj-$(CONFIG_ARCH_SHMOBILE_MULTI)	+= shmobile/
+obj-$(CONFIG_ARCH_RENESAS)		+= shmobile/
 obj-$(CONFIG_ARCH_SIRF)			+= sirf/
 obj-$(CONFIG_ARCH_SOCFPGA)		+= socfpga/
 obj-$(CONFIG_PLAT_SPEAR)		+= spear/
diff --git a/drivers/clk/shmobile/Makefile b/drivers/clk/shmobile/Makefile
index 1eb947db6f5926a0..7e2579b303267d8b 100644
--- a/drivers/clk/shmobile/Makefile
+++ b/drivers/clk/shmobile/Makefile
@@ -8,4 +8,6 @@ obj-$(CONFIG_ARCH_R8A7790)		+= clk-rcar-gen2.o clk-mstp.o clk-div6.o
 obj-$(CONFIG_ARCH_R8A7791)		+= clk-rcar-gen2.o clk-mstp.o clk-div6.o
 obj-$(CONFIG_ARCH_R8A7793)		+= clk-rcar-gen2.o clk-mstp.o clk-div6.o
 obj-$(CONFIG_ARCH_R8A7794)		+= clk-rcar-gen2.o clk-mstp.o clk-div6.o
+obj-$(CONFIG_ARCH_R8A7795)		+= renesas-cpg-mssr.o \
+					   r8a7795-cpg-mssr.o clk-div6.o
 obj-$(CONFIG_ARCH_SH73A0)		+= clk-sh73a0.o clk-mstp.o clk-div6.o
diff --git a/drivers/clk/shmobile/r8a7795-cpg-mssr.c b/drivers/clk/shmobile/r8a7795-cpg-mssr.c
new file mode 100644
index 0000000000000000..57c413635d1af135
--- /dev/null
+++ b/drivers/clk/shmobile/r8a7795-cpg-mssr.c
@@ -0,0 +1,382 @@
+/*
+ * r8a7795 Clock Pulse Generator / Module Standby and Software Reset
+ *
+ * Copyright (C) 2015 Glider bvba
+ *
+ * Based on clk-rcar-gen3.c
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/bug.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+
+#include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+
+#include "renesas-cpg-mssr.h"
+
+
+enum clk_ids {
+	/* Core Clock Outputs exported to DT */
+	LAST_DT_CORE_CLK = R8A7795_CLK_OSC,
+
+	/* External Input Clocks */
+	CLK_EXTAL,
+	CLK_EXTALR,
+
+	/* Internal Core Clocks */
+	CLK_MAIN,
+	CLK_PLL0,
+	CLK_PLL1,
+	CLK_PLL2,
+	CLK_PLL3,
+	CLK_PLL4,
+	CLK_PLL1_DIV2,
+	CLK_PLL1_DIV4,
+	CLK_S0,
+	CLK_S1,
+	CLK_S2,
+	CLK_S3,
+	CLK_SDSRC,
+	CLK_SSPSRC,
+
+	/* Module Clocks */
+	MOD_CLK_BASE
+};
+
+enum r8a7795_clk_types {
+	CLK_TYPE_GEN3_MAIN = CLK_TYPE_CUSTOM,
+	CLK_TYPE_GEN3_PLL0,
+	CLK_TYPE_GEN3_PLL1,
+	CLK_TYPE_GEN3_PLL2,
+	CLK_TYPE_GEN3_PLL3,
+	CLK_TYPE_GEN3_PLL4,
+};
+
+static const struct cpg_core_clk r8a7795_core_clks[] __initconst = {
+	/* External Clock Inputs */
+	DEF_INPUT("extal",  CLK_EXTAL),
+	DEF_INPUT("extalr", CLK_EXTALR),
+
+	/* Internal Core Clocks */
+	DEF_BASE(".main",       CLK_MAIN, CLK_TYPE_GEN3_MAIN, CLK_EXTAL),
+	DEF_BASE(".pll0",       CLK_PLL0, CLK_TYPE_GEN3_PLL0, CLK_MAIN),
+	DEF_BASE(".pll1",       CLK_PLL1, CLK_TYPE_GEN3_PLL1, CLK_MAIN),
+	DEF_BASE(".pll2",       CLK_PLL2, CLK_TYPE_GEN3_PLL2, CLK_MAIN),
+	DEF_BASE(".pll3",       CLK_PLL3, CLK_TYPE_GEN3_PLL3, CLK_MAIN),
+	DEF_BASE(".pll4",       CLK_PLL4, CLK_TYPE_GEN3_PLL4, CLK_MAIN),
+
+	DEF_FIXED(".pll1_div2", CLK_PLL1_DIV2,     CLK_PLL1,       2, 1),
+	DEF_FIXED(".pll1_div4", CLK_PLL1_DIV4,     CLK_PLL1_DIV2,  2, 1),
+	DEF_FIXED(".s0",        CLK_S0,            CLK_PLL1_DIV2,  2, 1),
+	DEF_FIXED(".s1",        CLK_S1,            CLK_PLL1_DIV2,  3, 1),
+	DEF_FIXED(".s2",        CLK_S2,            CLK_PLL1_DIV2,  4, 1),
+	DEF_FIXED(".s3",        CLK_S3,            CLK_PLL1_DIV2,  6, 1),
+
+	/* Core Clock Outputs */
+	DEF_FIXED("ztr",        R8A7795_CLK_ZTR,   CLK_PLL1_DIV2,  6, 1),
+	DEF_FIXED("ztrd2",      R8A7795_CLK_ZTRD2, CLK_PLL1_DIV2, 12, 1),
+	DEF_FIXED("zt",         R8A7795_CLK_ZT,    CLK_PLL1_DIV2,  4, 1),
+	DEF_FIXED("zx",         R8A7795_CLK_ZX,    CLK_PLL1_DIV2,  2, 1),
+	DEF_FIXED("s0d1",       R8A7795_CLK_S0D1,  CLK_S0,         1, 1),
+	DEF_FIXED("s0d4",       R8A7795_CLK_S0D4,  CLK_S0,         4, 1),
+	DEF_FIXED("s1d1",       R8A7795_CLK_S1D1,  CLK_S1,         1, 1),
+	DEF_FIXED("s1d2",       R8A7795_CLK_S1D2,  CLK_S1,         2, 1),
+	DEF_FIXED("s1d4",       R8A7795_CLK_S1D4,  CLK_S1,         4, 1),
+	DEF_FIXED("s2d1",       R8A7795_CLK_S2D1,  CLK_S2,         1, 1),
+	DEF_FIXED("s2d2",       R8A7795_CLK_S2D2,  CLK_S2,         2, 1),
+	DEF_FIXED("s2d4",       R8A7795_CLK_S2D4,  CLK_S2,         4, 1),
+	DEF_FIXED("s3d1",       R8A7795_CLK_S3D1,  CLK_S3,         1, 1),
+	DEF_FIXED("s3d2",       R8A7795_CLK_S3D2,  CLK_S3,         2, 1),
+	DEF_FIXED("s3d4",       R8A7795_CLK_S3D4,  CLK_S3,         4, 1),
+	DEF_FIXED("cl",         R8A7795_CLK_CL,    CLK_PLL1_DIV2, 48, 1),
+	DEF_FIXED("cp",         R8A7795_CLK_CP,    CLK_EXTAL,      2, 1),
+
+	DEF_DIV6P1("mso",       R8A7795_CLK_MSO,   CLK_PLL1_DIV4, 0x014),
+	DEF_DIV6P1("hdmi",      R8A7795_CLK_HDMI,  CLK_PLL1_DIV2, 0x250),
+};
+
+static const struct mssr_mod_clk r8a7795_mod_clks[] __initconst = {
+	DEF_MOD("scif5",		 202,	R8A7795_CLK_S3D4),
+	DEF_MOD("scif4",		 203,	R8A7795_CLK_S3D4),
+	DEF_MOD("scif3",		 204,	R8A7795_CLK_S3D4),
+	DEF_MOD("scif1",		 206,	R8A7795_CLK_S3D4),
+	DEF_MOD("scif0",		 207,	R8A7795_CLK_S3D4),
+	DEF_MOD("msiof3",		 208,	R8A7795_CLK_MSO),
+	DEF_MOD("msiof2",		 209,	R8A7795_CLK_MSO),
+	DEF_MOD("msiof1",		 210,	R8A7795_CLK_MSO),
+	DEF_MOD("msiof0",		 211,	R8A7795_CLK_MSO),
+	DEF_MOD("sys-dmac2",		 217,	R8A7795_CLK_S3D1),
+	DEF_MOD("sys-dmac1",		 218,	R8A7795_CLK_S3D1),
+	DEF_MOD("sys-dmac0",		 219,	R8A7795_CLK_S3D1),
+	DEF_MOD("scif2",		 310,	R8A7795_CLK_S3D4),
+	DEF_MOD("pcie1",		 318,	R8A7795_CLK_S3D1),
+	DEF_MOD("pcie0",		 319,	R8A7795_CLK_S3D1),
+	DEF_MOD("intc-ap",		 408,	R8A7795_CLK_S3D1),
+	DEF_MOD("audmac0",		 502,	R8A7795_CLK_S3D4),
+	DEF_MOD("audmac1",		 501,	R8A7795_CLK_S3D4),
+	DEF_MOD("hscif4",		 516,	R8A7795_CLK_S3D1),
+	DEF_MOD("hscif3",		 517,	R8A7795_CLK_S3D1),
+	DEF_MOD("hscif2",		 518,	R8A7795_CLK_S3D1),
+	DEF_MOD("hscif1",		 519,	R8A7795_CLK_S3D1),
+	DEF_MOD("hscif0",		 520,	R8A7795_CLK_S3D1),
+	DEF_MOD("vspd3",		 620,	R8A7795_CLK_S2D1),
+	DEF_MOD("vspd2",		 621,	R8A7795_CLK_S2D1),
+	DEF_MOD("vspd1",		 622,	R8A7795_CLK_S2D1),
+	DEF_MOD("vspd0",		 623,	R8A7795_CLK_S2D1),
+	DEF_MOD("vspbc",		 624,	R8A7795_CLK_S2D1),
+	DEF_MOD("vspbd",		 626,	R8A7795_CLK_S2D1),
+	DEF_MOD("vspi2",		 629,	R8A7795_CLK_S2D1),
+	DEF_MOD("vspi1",		 630,	R8A7795_CLK_S2D1),
+	DEF_MOD("vspi0",		 631,	R8A7795_CLK_S2D1),
+	DEF_MOD("ehci2",		 701,	R8A7795_CLK_S3D4),
+	DEF_MOD("ehci1",		 702,	R8A7795_CLK_S3D4),
+	DEF_MOD("ehci0",		 703,	R8A7795_CLK_S3D4),
+	DEF_MOD("hsusb",		 704,	R8A7795_CLK_S3D4),
+	DEF_MOD("du3",			 721,	R8A7795_CLK_S2D1),
+	DEF_MOD("du2",			 722,	R8A7795_CLK_S2D1),
+	DEF_MOD("du1",			 723,	R8A7795_CLK_S2D1),
+	DEF_MOD("du0",			 724,	R8A7795_CLK_S2D1),
+	DEF_MOD("hdmi1",		 728,	R8A7795_CLK_HDMI),
+	DEF_MOD("hdmi0",		 729,	R8A7795_CLK_HDMI),
+	DEF_MOD("etheravb",		 812,	R8A7795_CLK_S3D2),
+	DEF_MOD("gpio7",		 905,	R8A7795_CLK_CP),
+	DEF_MOD("gpio6",		 906,	R8A7795_CLK_CP),
+	DEF_MOD("gpio5",		 907,	R8A7795_CLK_CP),
+	DEF_MOD("gpio4",		 908,	R8A7795_CLK_CP),
+	DEF_MOD("gpio3",		 909,	R8A7795_CLK_CP),
+	DEF_MOD("gpio2",		 910,	R8A7795_CLK_CP),
+	DEF_MOD("gpio1",		 911,	R8A7795_CLK_CP),
+	DEF_MOD("gpio0",		 912,	R8A7795_CLK_CP),
+	DEF_MOD("i2c6",			 918,	R8A7795_CLK_S3D2),
+	DEF_MOD("i2c5",			 919,	R8A7795_CLK_S3D2),
+	DEF_MOD("i2c4",			 927,	R8A7795_CLK_S3D2),
+	DEF_MOD("i2c3",			 928,	R8A7795_CLK_S3D2),
+	DEF_MOD("i2c2",			 929,	R8A7795_CLK_S3D2),
+	DEF_MOD("i2c1",			 930,	R8A7795_CLK_S3D2),
+	DEF_MOD("i2c0",			 931,	R8A7795_CLK_S3D2),
+	DEF_MOD("ssi-all",		1005,	R8A7795_CLK_S3D4),
+	DEF_MOD("ssi9",			1006,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi8",			1007,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi7",			1008,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi6",			1009,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi5",			1010,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi4",			1011,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi3",			1012,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi2",			1013,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi1",			1014,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi0",			1015,	MOD_CLK_ID(1005)),
+	DEF_MOD("scu-all",		1017,	R8A7795_CLK_S3D4),
+	DEF_MOD("scu-dvc1",		1018,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-dvc0",		1019,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-ctu1-mix1",	1020,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-ctu0-mix0",	1021,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src9",		1022,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src8",		1023,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src7",		1024,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src6",		1025,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src5",		1026,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src4",		1027,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src3",		1028,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src2",		1029,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src1",		1030,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src0",		1031,	MOD_CLK_ID(1017)),
+};
+
+static const unsigned int r8a7795_crit_mod_clks[] __initconst = {
+	MOD_CLK_ID(408),	/* INTC-AP (GIC) */
+};
+
+
+#define CPG_PLL0CR	0x00d8
+#define CPG_PLL2CR	0x002c
+#define CPG_PLL4CR	0x01f4
+
+/*
+ * CPG Clock Data
+ */
+
+/*
+ *   MD		EXTAL		PLL0	PLL1	PLL2	PLL3	PLL4
+ * 14 13 19 17	(MHz)
+ *-------------------------------------------------------------------
+ * 0  0  0  0	16.66 x 1	x180	x192	x144	x192	x144
+ * 0  0  0  1	16.66 x 1	x180	x192	x144	x128	x144
+ * 0  0  1  0	Prohibited setting
+ * 0  0  1  1	16.66 x 1	x180	x192	x144	x192	x144
+ * 0  1  0  0	20    x 1	x150	x160	x120	x160	x120
+ * 0  1  0  1	20    x 1	x150	x160	x120	x106	x120
+ * 0  1  1  0	Prohibited setting
+ * 0  1  1  1	20    x 1	x150	x160	x120	x160	x120
+ * 1  0  0  0	25    x 1	x120	x128	x96	x128	x96
+ * 1  0  0  1	25    x 1	x120	x128	x96	x84	x96
+ * 1  0  1  0	Prohibited setting
+ * 1  0  1  1	25    x 1	x120	x128	x96	x128	x96
+ * 1  1  0  0	33.33 / 2	x180	x192	x144	x192	x144
+ * 1  1  0  1	33.33 / 2	x180	x192	x144	x128	x144
+ * 1  1  1  0	Prohibited setting
+ * 1  1  1  1	33.33 / 2	x180	x192	x144	x192	x144
+ */
+#define CPG_PLL_CONFIG_INDEX(md)	((((md) & BIT(14)) >> 11) | \
+					 (((md) & BIT(13)) >> 11) | \
+					 (((md) & BIT(19)) >> 18) | \
+					 (((md) & BIT(17)) >> 17))
+
+struct cpg_pll_config {
+	unsigned int extal_div;
+	unsigned int pll1_mult;
+	unsigned int pll3_mult;
+};
+
+static const struct cpg_pll_config cpg_pll_configs[16] __initconst = {
+	/* EXTAL div	PLL1 mult	PLL3 mult */
+	{ 1,		192,		192,	},
+	{ 1,		192,		128,	},
+	{ 0, /* Prohibited setting */		},
+	{ 1,		192,		192,	},
+	{ 1,		160,		160,	},
+	{ 1,		160,		106,	},
+	{ 0, /* Prohibited setting */		},
+	{ 1,		160,		160,	},
+	{ 1,		128,		128,	},
+	{ 1,		128,		84,	},
+	{ 0, /* Prohibited setting */		},
+	{ 1,		128,		128,	},
+	{ 2,		192,		192,	},
+	{ 2,		192,		128,	},
+	{ 0, /* Prohibited setting */		},
+	{ 2,		192,		192,	},
+};
+
+static const struct cpg_pll_config *cpg_pll_config __initdata;
+
+static
+struct clk * __init r8a7795_cpg_clk_register(struct device *dev,
+					     const struct cpg_core_clk *core,
+					     const struct cpg_mssr_info *info,
+					     struct clk **clks,
+					     void __iomem *base)
+{
+	const struct clk *parent;
+	unsigned int mult = 1;
+	unsigned int div = 1;
+	u32 value;
+
+	parent = clks[core->parent];
+	if (IS_ERR(parent))
+		return ERR_CAST(parent);
+
+	switch (core->type) {
+	case CLK_TYPE_GEN3_MAIN:
+		div = cpg_pll_config->extal_div;
+		break;
+
+	case CLK_TYPE_GEN3_PLL0:
+		/*
+		 * PLL0 is a configurable multiplier clock. Register it as a
+		 * fixed factor clock for now as there's no generic multiplier
+		 * clock implementation and we currently have no need to change
+		 * the multiplier value.
+		 */
+		value = readl(base + CPG_PLL0CR);
+		mult = (((value >> 24) & 0x7f) + 1) * 2;
+		break;
+
+	case CLK_TYPE_GEN3_PLL1:
+		mult = cpg_pll_config->pll1_mult;
+		break;
+
+	case CLK_TYPE_GEN3_PLL2:
+		/*
+		 * PLL2 is a configurable multiplier clock. Register it as a
+		 * fixed factor clock for now as there's no generic multiplier
+		 * clock implementation and we currently have no need to change
+		 * the multiplier value.
+		 */
+		value = readl(base + CPG_PLL2CR);
+		mult = (((value >> 24) & 0x7f) + 1) * 2;
+		break;
+
+	case CLK_TYPE_GEN3_PLL3:
+		mult = cpg_pll_config->pll3_mult;
+		break;
+
+	case CLK_TYPE_GEN3_PLL4:
+		/*
+		 * PLL4 is a configurable multiplier clock. Register it as a
+		 * fixed factor clock for now as there's no generic multiplier
+		 * clock implementation and we currently have no need to change
+		 * the multiplier value.
+		 */
+		value = readl(base + CPG_PLL4CR);
+		mult = (((value >> 24) & 0x7f) + 1) * 2;
+		break;
+
+	default:
+		return ERR_PTR(-EINVAL);
+	}
+
+	return clk_register_fixed_factor(NULL, core->name,
+					 __clk_get_name(parent), 0, mult, div);
+}
+
+/*
+ * Reset register definitions.
+ */
+#define MODEMR	0xe6160060
+
+static u32 rcar_gen3_read_mode_pins(void)
+{
+	void __iomem *modemr = ioremap_nocache(MODEMR, 4);
+	u32 mode;
+
+	BUG_ON(!modemr);
+	mode = ioread32(modemr);
+	iounmap(modemr);
+
+	return mode;
+}
+
+static int __init r8a7795_cpg_mssr_init(struct device *dev)
+{
+	u32 cpg_mode = rcar_gen3_read_mode_pins();
+
+	cpg_pll_config = &cpg_pll_configs[CPG_PLL_CONFIG_INDEX(cpg_mode)];
+	if (!cpg_pll_config->extal_div) {
+		dev_err(dev, "Prohibited setting (cpg_mode=0x%x)\n", cpg_mode);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+const struct cpg_mssr_info r8a7795_cpg_mssr_info __initconst = {
+	/* Core Clocks */
+	.core_clks = r8a7795_core_clks,
+	.num_core_clks = ARRAY_SIZE(r8a7795_core_clks),
+	.last_dt_core_clk = LAST_DT_CORE_CLK,
+	.num_total_core_clks = MOD_CLK_BASE,
+
+	/* Module Clocks */
+	.mod_clks = r8a7795_mod_clks,
+	.num_mod_clks = ARRAY_SIZE(r8a7795_mod_clks),
+	.num_hw_mod_clks = 12 * 32,
+
+	/* Critical Module Clocks */
+	.crit_mod_clks = r8a7795_crit_mod_clks,
+	.num_crit_mod_clks = ARRAY_SIZE(r8a7795_crit_mod_clks),
+
+	/* Callbacks */
+	.init = r8a7795_cpg_mssr_init,
+	.cpg_clk_register = r8a7795_cpg_clk_register,
+};
diff --git a/drivers/clk/shmobile/renesas-cpg-mssr.c b/drivers/clk/shmobile/renesas-cpg-mssr.c
index e4382ba4e1e31aca..a2cccc40fca783bf 100644
--- a/drivers/clk/shmobile/renesas-cpg-mssr.c
+++ b/drivers/clk/shmobile/renesas-cpg-mssr.c
@@ -498,6 +498,12 @@ static inline int cpg_mssr_add_clk_domain(struct device *dev,
 
 
 static const struct of_device_id cpg_mssr_match[] = {
+#ifdef CONFIG_ARCH_R8A7795
+	{
+		.compatible = "renesas,r8a7795-cpg-mssr",
+		.data = &r8a7795_cpg_mssr_info,
+	},
+#endif
 	{ /* sentinel */ }
 };
 
diff --git a/drivers/clk/shmobile/renesas-cpg-mssr.h b/drivers/clk/shmobile/renesas-cpg-mssr.h
index e6d24875b56f7755..e09f03cbf086b1d3 100644
--- a/drivers/clk/shmobile/renesas-cpg-mssr.h
+++ b/drivers/clk/shmobile/renesas-cpg-mssr.h
@@ -128,4 +128,5 @@ struct cpg_mssr_info {
 					struct clk **clks, void __iomem *base);
 };
 
+extern const struct cpg_mssr_info r8a7795_cpg_mssr_info;
 #endif
-- 
1.9.1


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [PATCH v6 5/5] clk: shmobile: r8a7795: Add new CPG/MSSR driver
@ 2015-11-12 15:54   ` Geert Uytterhoeven
  0 siblings, 0 replies; 20+ messages in thread
From: Geert Uytterhoeven @ 2015-11-12 15:54 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Magnus Damm, Simon Horman,
	Laurent Pinchart
  Cc: linux-clk, linux-sh, linux-kernel, Geert Uytterhoeven

Add a new R-Car H3 Clock Pulse Generator / Module Standby and Software
Reset driver, using the new CPG/MSSR driver core.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v6:
  - Correct PLL1 and PLL3 multipliers from 156 to 160[*],
  - Correct CPG_PLL0CR multiplier factor from x1 to x2, and multiplier
    mask from 0x3f to 0x7f (.pll0: 217 MHz => 1500 MHz),
  - Correct CPG_PLL2CR multiplier factor from x1 to x2[*], and
    multiplier mask from 0x3f to 0x7f (.pll2: 67 MHz => 1200 MHz),
  - Add and use CPG_PLL4CR for PLL4 instead of using the fixed value in
    cpg_pll_configs[],
  - Tidy up cpg_pll_configs[],
  - Add PCIe module clocks (from Phil Edworthy
    <phil.edworthy@renesas.com>),

    [*] Fixes from Manual Errata for Rev 0.50 of the R-Car Gen3
	datasheet.

v5:
  - Convert to real platform_driver,
  - Drop dependency on undocumented "renesas,modemr" property,
  - Move conversion from Module Clock numbers to IDs from run time (C
    code) to compile time (CPP macros for filling in tables),
  - Rename driver from clk-r8a7795-cpg-mssr to r8a7795-cpg-mssr,
  - Enter shmobile subdir if CONFIG_ARCH_RENESAS=y,
  - Clean up debugging code,
  - Drop RFC state,

v4:
  - New.
---
 drivers/clk/Makefile                    |   1 +
 drivers/clk/shmobile/Makefile           |   2 +
 drivers/clk/shmobile/r8a7795-cpg-mssr.c | 382 ++++++++++++++++++++++++++++++++
 drivers/clk/shmobile/renesas-cpg-mssr.c |   6 +
 drivers/clk/shmobile/renesas-cpg-mssr.h |   1 +
 5 files changed, 392 insertions(+)
 create mode 100644 drivers/clk/shmobile/r8a7795-cpg-mssr.c

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index d3e1910eebaba6ed..8cf50f9554318d2b 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -68,6 +68,7 @@ obj-$(CONFIG_COMMON_CLK_QCOM)		+= qcom/
 obj-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip/
 obj-$(CONFIG_COMMON_CLK_SAMSUNG)	+= samsung/
 obj-$(CONFIG_ARCH_SHMOBILE_MULTI)	+= shmobile/
+obj-$(CONFIG_ARCH_RENESAS)		+= shmobile/
 obj-$(CONFIG_ARCH_SIRF)			+= sirf/
 obj-$(CONFIG_ARCH_SOCFPGA)		+= socfpga/
 obj-$(CONFIG_PLAT_SPEAR)		+= spear/
diff --git a/drivers/clk/shmobile/Makefile b/drivers/clk/shmobile/Makefile
index 1eb947db6f5926a0..7e2579b303267d8b 100644
--- a/drivers/clk/shmobile/Makefile
+++ b/drivers/clk/shmobile/Makefile
@@ -8,4 +8,6 @@ obj-$(CONFIG_ARCH_R8A7790)		+= clk-rcar-gen2.o clk-mstp.o clk-div6.o
 obj-$(CONFIG_ARCH_R8A7791)		+= clk-rcar-gen2.o clk-mstp.o clk-div6.o
 obj-$(CONFIG_ARCH_R8A7793)		+= clk-rcar-gen2.o clk-mstp.o clk-div6.o
 obj-$(CONFIG_ARCH_R8A7794)		+= clk-rcar-gen2.o clk-mstp.o clk-div6.o
+obj-$(CONFIG_ARCH_R8A7795)		+= renesas-cpg-mssr.o \
+					   r8a7795-cpg-mssr.o clk-div6.o
 obj-$(CONFIG_ARCH_SH73A0)		+= clk-sh73a0.o clk-mstp.o clk-div6.o
diff --git a/drivers/clk/shmobile/r8a7795-cpg-mssr.c b/drivers/clk/shmobile/r8a7795-cpg-mssr.c
new file mode 100644
index 0000000000000000..57c413635d1af135
--- /dev/null
+++ b/drivers/clk/shmobile/r8a7795-cpg-mssr.c
@@ -0,0 +1,382 @@
+/*
+ * r8a7795 Clock Pulse Generator / Module Standby and Software Reset
+ *
+ * Copyright (C) 2015 Glider bvba
+ *
+ * Based on clk-rcar-gen3.c
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/bug.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+
+#include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+
+#include "renesas-cpg-mssr.h"
+
+
+enum clk_ids {
+	/* Core Clock Outputs exported to DT */
+	LAST_DT_CORE_CLK = R8A7795_CLK_OSC,
+
+	/* External Input Clocks */
+	CLK_EXTAL,
+	CLK_EXTALR,
+
+	/* Internal Core Clocks */
+	CLK_MAIN,
+	CLK_PLL0,
+	CLK_PLL1,
+	CLK_PLL2,
+	CLK_PLL3,
+	CLK_PLL4,
+	CLK_PLL1_DIV2,
+	CLK_PLL1_DIV4,
+	CLK_S0,
+	CLK_S1,
+	CLK_S2,
+	CLK_S3,
+	CLK_SDSRC,
+	CLK_SSPSRC,
+
+	/* Module Clocks */
+	MOD_CLK_BASE
+};
+
+enum r8a7795_clk_types {
+	CLK_TYPE_GEN3_MAIN = CLK_TYPE_CUSTOM,
+	CLK_TYPE_GEN3_PLL0,
+	CLK_TYPE_GEN3_PLL1,
+	CLK_TYPE_GEN3_PLL2,
+	CLK_TYPE_GEN3_PLL3,
+	CLK_TYPE_GEN3_PLL4,
+};
+
+static const struct cpg_core_clk r8a7795_core_clks[] __initconst = {
+	/* External Clock Inputs */
+	DEF_INPUT("extal",  CLK_EXTAL),
+	DEF_INPUT("extalr", CLK_EXTALR),
+
+	/* Internal Core Clocks */
+	DEF_BASE(".main",       CLK_MAIN, CLK_TYPE_GEN3_MAIN, CLK_EXTAL),
+	DEF_BASE(".pll0",       CLK_PLL0, CLK_TYPE_GEN3_PLL0, CLK_MAIN),
+	DEF_BASE(".pll1",       CLK_PLL1, CLK_TYPE_GEN3_PLL1, CLK_MAIN),
+	DEF_BASE(".pll2",       CLK_PLL2, CLK_TYPE_GEN3_PLL2, CLK_MAIN),
+	DEF_BASE(".pll3",       CLK_PLL3, CLK_TYPE_GEN3_PLL3, CLK_MAIN),
+	DEF_BASE(".pll4",       CLK_PLL4, CLK_TYPE_GEN3_PLL4, CLK_MAIN),
+
+	DEF_FIXED(".pll1_div2", CLK_PLL1_DIV2,     CLK_PLL1,       2, 1),
+	DEF_FIXED(".pll1_div4", CLK_PLL1_DIV4,     CLK_PLL1_DIV2,  2, 1),
+	DEF_FIXED(".s0",        CLK_S0,            CLK_PLL1_DIV2,  2, 1),
+	DEF_FIXED(".s1",        CLK_S1,            CLK_PLL1_DIV2,  3, 1),
+	DEF_FIXED(".s2",        CLK_S2,            CLK_PLL1_DIV2,  4, 1),
+	DEF_FIXED(".s3",        CLK_S3,            CLK_PLL1_DIV2,  6, 1),
+
+	/* Core Clock Outputs */
+	DEF_FIXED("ztr",        R8A7795_CLK_ZTR,   CLK_PLL1_DIV2,  6, 1),
+	DEF_FIXED("ztrd2",      R8A7795_CLK_ZTRD2, CLK_PLL1_DIV2, 12, 1),
+	DEF_FIXED("zt",         R8A7795_CLK_ZT,    CLK_PLL1_DIV2,  4, 1),
+	DEF_FIXED("zx",         R8A7795_CLK_ZX,    CLK_PLL1_DIV2,  2, 1),
+	DEF_FIXED("s0d1",       R8A7795_CLK_S0D1,  CLK_S0,         1, 1),
+	DEF_FIXED("s0d4",       R8A7795_CLK_S0D4,  CLK_S0,         4, 1),
+	DEF_FIXED("s1d1",       R8A7795_CLK_S1D1,  CLK_S1,         1, 1),
+	DEF_FIXED("s1d2",       R8A7795_CLK_S1D2,  CLK_S1,         2, 1),
+	DEF_FIXED("s1d4",       R8A7795_CLK_S1D4,  CLK_S1,         4, 1),
+	DEF_FIXED("s2d1",       R8A7795_CLK_S2D1,  CLK_S2,         1, 1),
+	DEF_FIXED("s2d2",       R8A7795_CLK_S2D2,  CLK_S2,         2, 1),
+	DEF_FIXED("s2d4",       R8A7795_CLK_S2D4,  CLK_S2,         4, 1),
+	DEF_FIXED("s3d1",       R8A7795_CLK_S3D1,  CLK_S3,         1, 1),
+	DEF_FIXED("s3d2",       R8A7795_CLK_S3D2,  CLK_S3,         2, 1),
+	DEF_FIXED("s3d4",       R8A7795_CLK_S3D4,  CLK_S3,         4, 1),
+	DEF_FIXED("cl",         R8A7795_CLK_CL,    CLK_PLL1_DIV2, 48, 1),
+	DEF_FIXED("cp",         R8A7795_CLK_CP,    CLK_EXTAL,      2, 1),
+
+	DEF_DIV6P1("mso",       R8A7795_CLK_MSO,   CLK_PLL1_DIV4, 0x014),
+	DEF_DIV6P1("hdmi",      R8A7795_CLK_HDMI,  CLK_PLL1_DIV2, 0x250),
+};
+
+static const struct mssr_mod_clk r8a7795_mod_clks[] __initconst = {
+	DEF_MOD("scif5",		 202,	R8A7795_CLK_S3D4),
+	DEF_MOD("scif4",		 203,	R8A7795_CLK_S3D4),
+	DEF_MOD("scif3",		 204,	R8A7795_CLK_S3D4),
+	DEF_MOD("scif1",		 206,	R8A7795_CLK_S3D4),
+	DEF_MOD("scif0",		 207,	R8A7795_CLK_S3D4),
+	DEF_MOD("msiof3",		 208,	R8A7795_CLK_MSO),
+	DEF_MOD("msiof2",		 209,	R8A7795_CLK_MSO),
+	DEF_MOD("msiof1",		 210,	R8A7795_CLK_MSO),
+	DEF_MOD("msiof0",		 211,	R8A7795_CLK_MSO),
+	DEF_MOD("sys-dmac2",		 217,	R8A7795_CLK_S3D1),
+	DEF_MOD("sys-dmac1",		 218,	R8A7795_CLK_S3D1),
+	DEF_MOD("sys-dmac0",		 219,	R8A7795_CLK_S3D1),
+	DEF_MOD("scif2",		 310,	R8A7795_CLK_S3D4),
+	DEF_MOD("pcie1",		 318,	R8A7795_CLK_S3D1),
+	DEF_MOD("pcie0",		 319,	R8A7795_CLK_S3D1),
+	DEF_MOD("intc-ap",		 408,	R8A7795_CLK_S3D1),
+	DEF_MOD("audmac0",		 502,	R8A7795_CLK_S3D4),
+	DEF_MOD("audmac1",		 501,	R8A7795_CLK_S3D4),
+	DEF_MOD("hscif4",		 516,	R8A7795_CLK_S3D1),
+	DEF_MOD("hscif3",		 517,	R8A7795_CLK_S3D1),
+	DEF_MOD("hscif2",		 518,	R8A7795_CLK_S3D1),
+	DEF_MOD("hscif1",		 519,	R8A7795_CLK_S3D1),
+	DEF_MOD("hscif0",		 520,	R8A7795_CLK_S3D1),
+	DEF_MOD("vspd3",		 620,	R8A7795_CLK_S2D1),
+	DEF_MOD("vspd2",		 621,	R8A7795_CLK_S2D1),
+	DEF_MOD("vspd1",		 622,	R8A7795_CLK_S2D1),
+	DEF_MOD("vspd0",		 623,	R8A7795_CLK_S2D1),
+	DEF_MOD("vspbc",		 624,	R8A7795_CLK_S2D1),
+	DEF_MOD("vspbd",		 626,	R8A7795_CLK_S2D1),
+	DEF_MOD("vspi2",		 629,	R8A7795_CLK_S2D1),
+	DEF_MOD("vspi1",		 630,	R8A7795_CLK_S2D1),
+	DEF_MOD("vspi0",		 631,	R8A7795_CLK_S2D1),
+	DEF_MOD("ehci2",		 701,	R8A7795_CLK_S3D4),
+	DEF_MOD("ehci1",		 702,	R8A7795_CLK_S3D4),
+	DEF_MOD("ehci0",		 703,	R8A7795_CLK_S3D4),
+	DEF_MOD("hsusb",		 704,	R8A7795_CLK_S3D4),
+	DEF_MOD("du3",			 721,	R8A7795_CLK_S2D1),
+	DEF_MOD("du2",			 722,	R8A7795_CLK_S2D1),
+	DEF_MOD("du1",			 723,	R8A7795_CLK_S2D1),
+	DEF_MOD("du0",			 724,	R8A7795_CLK_S2D1),
+	DEF_MOD("hdmi1",		 728,	R8A7795_CLK_HDMI),
+	DEF_MOD("hdmi0",		 729,	R8A7795_CLK_HDMI),
+	DEF_MOD("etheravb",		 812,	R8A7795_CLK_S3D2),
+	DEF_MOD("gpio7",		 905,	R8A7795_CLK_CP),
+	DEF_MOD("gpio6",		 906,	R8A7795_CLK_CP),
+	DEF_MOD("gpio5",		 907,	R8A7795_CLK_CP),
+	DEF_MOD("gpio4",		 908,	R8A7795_CLK_CP),
+	DEF_MOD("gpio3",		 909,	R8A7795_CLK_CP),
+	DEF_MOD("gpio2",		 910,	R8A7795_CLK_CP),
+	DEF_MOD("gpio1",		 911,	R8A7795_CLK_CP),
+	DEF_MOD("gpio0",		 912,	R8A7795_CLK_CP),
+	DEF_MOD("i2c6",			 918,	R8A7795_CLK_S3D2),
+	DEF_MOD("i2c5",			 919,	R8A7795_CLK_S3D2),
+	DEF_MOD("i2c4",			 927,	R8A7795_CLK_S3D2),
+	DEF_MOD("i2c3",			 928,	R8A7795_CLK_S3D2),
+	DEF_MOD("i2c2",			 929,	R8A7795_CLK_S3D2),
+	DEF_MOD("i2c1",			 930,	R8A7795_CLK_S3D2),
+	DEF_MOD("i2c0",			 931,	R8A7795_CLK_S3D2),
+	DEF_MOD("ssi-all",		1005,	R8A7795_CLK_S3D4),
+	DEF_MOD("ssi9",			1006,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi8",			1007,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi7",			1008,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi6",			1009,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi5",			1010,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi4",			1011,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi3",			1012,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi2",			1013,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi1",			1014,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi0",			1015,	MOD_CLK_ID(1005)),
+	DEF_MOD("scu-all",		1017,	R8A7795_CLK_S3D4),
+	DEF_MOD("scu-dvc1",		1018,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-dvc0",		1019,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-ctu1-mix1",	1020,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-ctu0-mix0",	1021,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src9",		1022,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src8",		1023,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src7",		1024,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src6",		1025,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src5",		1026,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src4",		1027,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src3",		1028,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src2",		1029,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src1",		1030,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src0",		1031,	MOD_CLK_ID(1017)),
+};
+
+static const unsigned int r8a7795_crit_mod_clks[] __initconst = {
+	MOD_CLK_ID(408),	/* INTC-AP (GIC) */
+};
+
+
+#define CPG_PLL0CR	0x00d8
+#define CPG_PLL2CR	0x002c
+#define CPG_PLL4CR	0x01f4
+
+/*
+ * CPG Clock Data
+ */
+
+/*
+ *   MD		EXTAL		PLL0	PLL1	PLL2	PLL3	PLL4
+ * 14 13 19 17	(MHz)
+ *-------------------------------------------------------------------
+ * 0  0  0  0	16.66 x 1	x180	x192	x144	x192	x144
+ * 0  0  0  1	16.66 x 1	x180	x192	x144	x128	x144
+ * 0  0  1  0	Prohibited setting
+ * 0  0  1  1	16.66 x 1	x180	x192	x144	x192	x144
+ * 0  1  0  0	20    x 1	x150	x160	x120	x160	x120
+ * 0  1  0  1	20    x 1	x150	x160	x120	x106	x120
+ * 0  1  1  0	Prohibited setting
+ * 0  1  1  1	20    x 1	x150	x160	x120	x160	x120
+ * 1  0  0  0	25    x 1	x120	x128	x96	x128	x96
+ * 1  0  0  1	25    x 1	x120	x128	x96	x84	x96
+ * 1  0  1  0	Prohibited setting
+ * 1  0  1  1	25    x 1	x120	x128	x96	x128	x96
+ * 1  1  0  0	33.33 / 2	x180	x192	x144	x192	x144
+ * 1  1  0  1	33.33 / 2	x180	x192	x144	x128	x144
+ * 1  1  1  0	Prohibited setting
+ * 1  1  1  1	33.33 / 2	x180	x192	x144	x192	x144
+ */
+#define CPG_PLL_CONFIG_INDEX(md)	((((md) & BIT(14)) >> 11) | \
+					 (((md) & BIT(13)) >> 11) | \
+					 (((md) & BIT(19)) >> 18) | \
+					 (((md) & BIT(17)) >> 17))
+
+struct cpg_pll_config {
+	unsigned int extal_div;
+	unsigned int pll1_mult;
+	unsigned int pll3_mult;
+};
+
+static const struct cpg_pll_config cpg_pll_configs[16] __initconst = {
+	/* EXTAL div	PLL1 mult	PLL3 mult */
+	{ 1,		192,		192,	},
+	{ 1,		192,		128,	},
+	{ 0, /* Prohibited setting */		},
+	{ 1,		192,		192,	},
+	{ 1,		160,		160,	},
+	{ 1,		160,		106,	},
+	{ 0, /* Prohibited setting */		},
+	{ 1,		160,		160,	},
+	{ 1,		128,		128,	},
+	{ 1,		128,		84,	},
+	{ 0, /* Prohibited setting */		},
+	{ 1,		128,		128,	},
+	{ 2,		192,		192,	},
+	{ 2,		192,		128,	},
+	{ 0, /* Prohibited setting */		},
+	{ 2,		192,		192,	},
+};
+
+static const struct cpg_pll_config *cpg_pll_config __initdata;
+
+static
+struct clk * __init r8a7795_cpg_clk_register(struct device *dev,
+					     const struct cpg_core_clk *core,
+					     const struct cpg_mssr_info *info,
+					     struct clk **clks,
+					     void __iomem *base)
+{
+	const struct clk *parent;
+	unsigned int mult = 1;
+	unsigned int div = 1;
+	u32 value;
+
+	parent = clks[core->parent];
+	if (IS_ERR(parent))
+		return ERR_CAST(parent);
+
+	switch (core->type) {
+	case CLK_TYPE_GEN3_MAIN:
+		div = cpg_pll_config->extal_div;
+		break;
+
+	case CLK_TYPE_GEN3_PLL0:
+		/*
+		 * PLL0 is a configurable multiplier clock. Register it as a
+		 * fixed factor clock for now as there's no generic multiplier
+		 * clock implementation and we currently have no need to change
+		 * the multiplier value.
+		 */
+		value = readl(base + CPG_PLL0CR);
+		mult = (((value >> 24) & 0x7f) + 1) * 2;
+		break;
+
+	case CLK_TYPE_GEN3_PLL1:
+		mult = cpg_pll_config->pll1_mult;
+		break;
+
+	case CLK_TYPE_GEN3_PLL2:
+		/*
+		 * PLL2 is a configurable multiplier clock. Register it as a
+		 * fixed factor clock for now as there's no generic multiplier
+		 * clock implementation and we currently have no need to change
+		 * the multiplier value.
+		 */
+		value = readl(base + CPG_PLL2CR);
+		mult = (((value >> 24) & 0x7f) + 1) * 2;
+		break;
+
+	case CLK_TYPE_GEN3_PLL3:
+		mult = cpg_pll_config->pll3_mult;
+		break;
+
+	case CLK_TYPE_GEN3_PLL4:
+		/*
+		 * PLL4 is a configurable multiplier clock. Register it as a
+		 * fixed factor clock for now as there's no generic multiplier
+		 * clock implementation and we currently have no need to change
+		 * the multiplier value.
+		 */
+		value = readl(base + CPG_PLL4CR);
+		mult = (((value >> 24) & 0x7f) + 1) * 2;
+		break;
+
+	default:
+		return ERR_PTR(-EINVAL);
+	}
+
+	return clk_register_fixed_factor(NULL, core->name,
+					 __clk_get_name(parent), 0, mult, div);
+}
+
+/*
+ * Reset register definitions.
+ */
+#define MODEMR	0xe6160060
+
+static u32 rcar_gen3_read_mode_pins(void)
+{
+	void __iomem *modemr = ioremap_nocache(MODEMR, 4);
+	u32 mode;
+
+	BUG_ON(!modemr);
+	mode = ioread32(modemr);
+	iounmap(modemr);
+
+	return mode;
+}
+
+static int __init r8a7795_cpg_mssr_init(struct device *dev)
+{
+	u32 cpg_mode = rcar_gen3_read_mode_pins();
+
+	cpg_pll_config = &cpg_pll_configs[CPG_PLL_CONFIG_INDEX(cpg_mode)];
+	if (!cpg_pll_config->extal_div) {
+		dev_err(dev, "Prohibited setting (cpg_mode=0x%x)\n", cpg_mode);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+const struct cpg_mssr_info r8a7795_cpg_mssr_info __initconst = {
+	/* Core Clocks */
+	.core_clks = r8a7795_core_clks,
+	.num_core_clks = ARRAY_SIZE(r8a7795_core_clks),
+	.last_dt_core_clk = LAST_DT_CORE_CLK,
+	.num_total_core_clks = MOD_CLK_BASE,
+
+	/* Module Clocks */
+	.mod_clks = r8a7795_mod_clks,
+	.num_mod_clks = ARRAY_SIZE(r8a7795_mod_clks),
+	.num_hw_mod_clks = 12 * 32,
+
+	/* Critical Module Clocks */
+	.crit_mod_clks = r8a7795_crit_mod_clks,
+	.num_crit_mod_clks = ARRAY_SIZE(r8a7795_crit_mod_clks),
+
+	/* Callbacks */
+	.init = r8a7795_cpg_mssr_init,
+	.cpg_clk_register = r8a7795_cpg_clk_register,
+};
diff --git a/drivers/clk/shmobile/renesas-cpg-mssr.c b/drivers/clk/shmobile/renesas-cpg-mssr.c
index e4382ba4e1e31aca..a2cccc40fca783bf 100644
--- a/drivers/clk/shmobile/renesas-cpg-mssr.c
+++ b/drivers/clk/shmobile/renesas-cpg-mssr.c
@@ -498,6 +498,12 @@ static inline int cpg_mssr_add_clk_domain(struct device *dev,
 
 
 static const struct of_device_id cpg_mssr_match[] = {
+#ifdef CONFIG_ARCH_R8A7795
+	{
+		.compatible = "renesas,r8a7795-cpg-mssr",
+		.data = &r8a7795_cpg_mssr_info,
+	},
+#endif
 	{ /* sentinel */ }
 };
 
diff --git a/drivers/clk/shmobile/renesas-cpg-mssr.h b/drivers/clk/shmobile/renesas-cpg-mssr.h
index e6d24875b56f7755..e09f03cbf086b1d3 100644
--- a/drivers/clk/shmobile/renesas-cpg-mssr.h
+++ b/drivers/clk/shmobile/renesas-cpg-mssr.h
@@ -128,4 +128,5 @@ struct cpg_mssr_info {
 					struct clk **clks, void __iomem *base);
 };
 
+extern const struct cpg_mssr_info r8a7795_cpg_mssr_info;
 #endif
-- 
1.9.1


^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [PATCH v6 0/5] clk: shmobile: Add new CPG/MSSR driver
  2015-11-12 15:54 ` Geert Uytterhoeven
@ 2015-12-04  9:04   ` Geert Uytterhoeven
  -1 siblings, 0 replies; 20+ messages in thread
From: Geert Uytterhoeven @ 2015-12-04  9:04 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd
  Cc: Magnus Damm, Simon Horman, Laurent Pinchart, linux-clk,
	Linux-sh list, linux-kernel

On Thu, Nov 12, 2015 at 4:54 PM, Geert Uytterhoeven
<geert+renesas@glider.be> wrote:
> This series adds a new driver for the Renesas CPG (Clock Pulse
> Generator) and MSSR (Module Standby and Software Reset) blocks for R-Car
> H3 (r8a7795).  This is supposed to be more in-line with current CCF best
> practices, and allows expansion to cover the module reset functionality
> in the future. This drivers follows the DT bindings in
> Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt, which have
> been accepted in clk/clk-next.
> Support for other SoCs may be added later.

Ping?

Thanks!

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [PATCH v6 0/5] clk: shmobile: Add new CPG/MSSR driver
@ 2015-12-04  9:04   ` Geert Uytterhoeven
  0 siblings, 0 replies; 20+ messages in thread
From: Geert Uytterhoeven @ 2015-12-04  9:04 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd
  Cc: Magnus Damm, Simon Horman, Laurent Pinchart, linux-clk,
	Linux-sh list, linux-kernel

On Thu, Nov 12, 2015 at 4:54 PM, Geert Uytterhoeven
<geert+renesas@glider.be> wrote:
> This series adds a new driver for the Renesas CPG (Clock Pulse
> Generator) and MSSR (Module Standby and Software Reset) blocks for R-Car
> H3 (r8a7795).  This is supposed to be more in-line with current CCF best
> practices, and allows expansion to cover the module reset functionality
> in the future. This drivers follows the DT bindings in
> Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt, which have
> been accepted in clk/clk-next.
> Support for other SoCs may be added later.

Ping?

Thanks!

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [PATCH v6 4/5] clk: shmobile: Add new CPG/MSSR driver core
  2015-11-12 15:54   ` Geert Uytterhoeven
@ 2015-12-05  3:08     ` Laurent Pinchart
  -1 siblings, 0 replies; 20+ messages in thread
From: Laurent Pinchart @ 2015-12-05  3:08 UTC (permalink / raw)
  To: Geert Uytterhoeven
  Cc: Michael Turquette, Stephen Boyd, Magnus Damm, Simon Horman,
	linux-clk, linux-sh, linux-kernel

Hi Geert,

Thank you for the patch.

On Thursday 12 November 2015 16:54:45 Geert Uytterhoeven wrote:
> Add the common core for the new Renesas Clock Pulse Generator / Module
> Standby and Software Reset driver.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> v6:
>   - No changes,
> 
> v5:
>   - Convert from CLK_OF_DECLARE() to a real platform_driver, initialized
>     using platform_driver_probe() from subsys_initcall().
>     Note that arch_initcall() would be OK for arm32, but not for arm64:
>       - arm32 calls of_platform_populate() from arch_initcall(),
>       - arm64 calls of_platform_populate() from arch_initcall_sync().
>   - Implement handling of core clocks that are suitable for power
>     management (not needed for R-Car, but useful for SH-Mobile AG5 and
>     R-Mobile APE6),
>   - Add cpg_mssr_info.init(), as initialization is now done from the
>     core driver,
>   - Move conversion from Module Clock numbers to IDs from run time (C
>     code) to compile time (CPP macros for filling in tables),
>   - Unify some code to handle CLK_TYPE_IN and CLK_TYPE_FF,
>   - Rename from clk-cpg-mssr to renesas-cpg-mssr,
>   - Add include guards to clk-cpg-mssr.h,
>   - Improve struct documentation,
>   - Clean up debugging code,
>   - Drop RFC state,
> 
> v4:
>   - New.
> ---
>  drivers/clk/shmobile/renesas-cpg-mssr.c | 587 +++++++++++++++++++++++++++++
>  drivers/clk/shmobile/renesas-cpg-mssr.h | 131 +++++++
>  2 files changed, 718 insertions(+)
>  create mode 100644 drivers/clk/shmobile/renesas-cpg-mssr.c
>  create mode 100644 drivers/clk/shmobile/renesas-cpg-mssr.h
> 
> diff --git a/drivers/clk/shmobile/renesas-cpg-mssr.c
> b/drivers/clk/shmobile/renesas-cpg-mssr.c new file mode 100644
> index 0000000000000000..e4382ba4e1e31aca
> --- /dev/null
> +++ b/drivers/clk/shmobile/renesas-cpg-mssr.c

[snip]

> +static inline int cpg_mssr_add_clk_domain(struct device *dev,
> +					  const unsigned int *core_pm_clks,
> +					  unsigned int num_core_pm_clks) {}

The function is missing a return statement.

> +#endif /* !CONFIG_PM_GENERIC_DOMAINS_OF */

[snip]

-- 
Regards,

Laurent Pinchart


^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [PATCH v6 4/5] clk: shmobile: Add new CPG/MSSR driver core
@ 2015-12-05  3:08     ` Laurent Pinchart
  0 siblings, 0 replies; 20+ messages in thread
From: Laurent Pinchart @ 2015-12-05  3:08 UTC (permalink / raw)
  To: Geert Uytterhoeven
  Cc: Michael Turquette, Stephen Boyd, Magnus Damm, Simon Horman,
	linux-clk, linux-sh, linux-kernel

Hi Geert,

Thank you for the patch.

On Thursday 12 November 2015 16:54:45 Geert Uytterhoeven wrote:
> Add the common core for the new Renesas Clock Pulse Generator / Module
> Standby and Software Reset driver.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> v6:
>   - No changes,
> 
> v5:
>   - Convert from CLK_OF_DECLARE() to a real platform_driver, initialized
>     using platform_driver_probe() from subsys_initcall().
>     Note that arch_initcall() would be OK for arm32, but not for arm64:
>       - arm32 calls of_platform_populate() from arch_initcall(),
>       - arm64 calls of_platform_populate() from arch_initcall_sync().
>   - Implement handling of core clocks that are suitable for power
>     management (not needed for R-Car, but useful for SH-Mobile AG5 and
>     R-Mobile APE6),
>   - Add cpg_mssr_info.init(), as initialization is now done from the
>     core driver,
>   - Move conversion from Module Clock numbers to IDs from run time (C
>     code) to compile time (CPP macros for filling in tables),
>   - Unify some code to handle CLK_TYPE_IN and CLK_TYPE_FF,
>   - Rename from clk-cpg-mssr to renesas-cpg-mssr,
>   - Add include guards to clk-cpg-mssr.h,
>   - Improve struct documentation,
>   - Clean up debugging code,
>   - Drop RFC state,
> 
> v4:
>   - New.
> ---
>  drivers/clk/shmobile/renesas-cpg-mssr.c | 587 +++++++++++++++++++++++++++++
>  drivers/clk/shmobile/renesas-cpg-mssr.h | 131 +++++++
>  2 files changed, 718 insertions(+)
>  create mode 100644 drivers/clk/shmobile/renesas-cpg-mssr.c
>  create mode 100644 drivers/clk/shmobile/renesas-cpg-mssr.h
> 
> diff --git a/drivers/clk/shmobile/renesas-cpg-mssr.c
> b/drivers/clk/shmobile/renesas-cpg-mssr.c new file mode 100644
> index 0000000000000000..e4382ba4e1e31aca
> --- /dev/null
> +++ b/drivers/clk/shmobile/renesas-cpg-mssr.c

[snip]

> +static inline int cpg_mssr_add_clk_domain(struct device *dev,
> +					  const unsigned int *core_pm_clks,
> +					  unsigned int num_core_pm_clks) {}

The function is missing a return statement.

> +#endif /* !CONFIG_PM_GENERIC_DOMAINS_OF */

[snip]

-- 
Regards,

Laurent Pinchart


^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [PATCH v6 4/5] clk: shmobile: Add new CPG/MSSR driver core
  2015-12-05  3:08     ` Laurent Pinchart
@ 2015-12-08  9:38       ` Geert Uytterhoeven
  -1 siblings, 0 replies; 20+ messages in thread
From: Geert Uytterhoeven @ 2015-12-08  9:38 UTC (permalink / raw)
  To: Laurent Pinchart
  Cc: Geert Uytterhoeven, Michael Turquette, Stephen Boyd, Magnus Damm,
	Simon Horman, linux-clk, Linux-sh list, linux-kernel

On Sat, Dec 5, 2015 at 4:08 AM, Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>> +static inline int cpg_mssr_add_clk_domain(struct device *dev,
>> +                                       const unsigned int *core_pm_clks,
>> +                                       unsigned int num_core_pm_clks) {}
>
> The function is missing a return statement.

Thank you, will include for v7 and/or final pull request.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [PATCH v6 4/5] clk: shmobile: Add new CPG/MSSR driver core
@ 2015-12-08  9:38       ` Geert Uytterhoeven
  0 siblings, 0 replies; 20+ messages in thread
From: Geert Uytterhoeven @ 2015-12-08  9:38 UTC (permalink / raw)
  To: Laurent Pinchart
  Cc: Geert Uytterhoeven, Michael Turquette, Stephen Boyd, Magnus Damm,
	Simon Horman, linux-clk, Linux-sh list, linux-kernel

On Sat, Dec 5, 2015 at 4:08 AM, Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>> +static inline int cpg_mssr_add_clk_domain(struct device *dev,
>> +                                       const unsigned int *core_pm_clks,
>> +                                       unsigned int num_core_pm_clks) {}
>
> The function is missing a return statement.

Thank you, will include for v7 and/or final pull request.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 20+ messages in thread

* clk: r8a7795: Why to read EXTAL* from DT? (was: Re: [PATCH v6 5/5] clk: shmobile: r8a7795: Add new CPG/MSSR driver)
  2015-11-12 15:54   ` Geert Uytterhoeven
  (?)
@ 2017-10-25  6:12   ` Dirk Behme
  2017-10-25 10:27     ` Geert Uytterhoeven
  -1 siblings, 1 reply; 20+ messages in thread
From: Dirk Behme @ 2017-10-25  6:12 UTC (permalink / raw)
  To: Geert Uytterhoeven; +Cc: linux-renesas-soc

Hi Geert,

today, I want to learn some history ;)

On 12.11.2015 16:54, Geert Uytterhoeven wrote:
> Add a new R-Car H3 Clock Pulse Generator / Module Standby and Software
> Reset driver, using the new CPG/MSSR driver core.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
...
> diff --git a/drivers/clk/shmobile/r8a7795-cpg-mssr.c b/drivers/clk/shmobile/r8a7795-cpg-mssr.c
> new file mode 100644
> index 0000000000000000..57c413635d1af135
> --- /dev/null
> +++ b/drivers/clk/shmobile/r8a7795-cpg-mssr.c
...
> +static const struct cpg_core_clk r8a7795_core_clks[] __initconst = {
> +	/* External Clock Inputs */
> +	DEF_INPUT("extal",  CLK_EXTAL),
> +	DEF_INPUT("extalr", CLK_EXTALR),


Why do we read the extal* frequencies from DT and don't auto detect them 
based on the MD pins?

Yesterday, I spent two hours debugging a clock issue due to a wrong DT 
because the hardware guys populated a different EXTAL oscillator. I 
would have saved this time if it would have been auto detected.

Best regards

Dirk

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: clk: r8a7795: Why to read EXTAL* from DT? (was: Re: [PATCH v6 5/5] clk: shmobile: r8a7795: Add new CPG/MSSR driver)
  2017-10-25  6:12   ` clk: r8a7795: Why to read EXTAL* from DT? (was: Re: [PATCH v6 5/5] clk: shmobile: r8a7795: Add new CPG/MSSR driver) Dirk Behme
@ 2017-10-25 10:27     ` Geert Uytterhoeven
  0 siblings, 0 replies; 20+ messages in thread
From: Geert Uytterhoeven @ 2017-10-25 10:27 UTC (permalink / raw)
  To: Dirk Behme; +Cc: Geert Uytterhoeven, Linux-Renesas

Hi Dirk,

On Wed, Oct 25, 2017 at 8:12 AM, Dirk Behme <dirk.behme@de.bosch.com> wrote:
> today, I want to learn some history ;)
>
> On 12.11.2015 16:54, Geert Uytterhoeven wrote:
>> Add a new R-Car H3 Clock Pulse Generator / Module Standby and Software
>> Reset driver, using the new CPG/MSSR driver core.
>>
>> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
>> ---
>
> ...
>>
>> diff --git a/drivers/clk/shmobile/r8a7795-cpg-mssr.c
>> b/drivers/clk/shmobile/r8a7795-cpg-mssr.c
>> new file mode 100644
>> index 0000000000000000..57c413635d1af135
>> --- /dev/null
>> +++ b/drivers/clk/shmobile/r8a7795-cpg-mssr.c
>
> ...
>>
>> +static const struct cpg_core_clk r8a7795_core_clks[] __initconst = {
>> +       /* External Clock Inputs */
>> +       DEF_INPUT("extal",  CLK_EXTAL),
>> +       DEF_INPUT("extalr", CLK_EXTALR),
>
> Why do we read the extal* frequencies from DT and don't auto detect them
> based on the MD pins?

Because the input frequency is determined by the EXTAL.
The MD pins define which dividers are used. So knowing both allows to calculate
the real frequencies of all generated clocks. People may populate different
crystals that supported officially.

> Yesterday, I spent two hours debugging a clock issue due to a wrong DT
> because the hardware guys populated a different EXTAL oscillator. I would
> have saved this time if it would have been auto detected.

That's actually the issue the code wanted to solve: on R-Car H3 ES1.0, there
are missing post-dividers on PLL0/2/4, cfr. the PLL_ERRATA flag in the driver.
To work around that, and avoid overclocking e.g. the CPU cores, the EXTAL
frequency and MD pin configuration don't match on Salvator-X with H3 ES1.0
(EXTAL is half the expected frequency according to the MD pins).

Conclusion: make sure your hardware description in DT is correct :-)

P.S. On R-Car Gen2, we used to "guess" extal from the MD pins in some
places, but that was changed. See e.g. commit 9f5ce39ddb8f68b3 ("ARM:
shmobile: rcar-gen2: Obtain extal frequency from DT").

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 20+ messages in thread

end of thread, other threads:[~2017-10-25 10:27 UTC | newest]

Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-11-12 15:54 [PATCH v6 0/5] clk: shmobile: Add new CPG/MSSR driver Geert Uytterhoeven
2015-11-12 15:54 ` Geert Uytterhoeven
2015-11-12 15:54 ` [PATCH v6 1/5] clk: shmobile: Rework CONFIG_ARCH_SHMOBILE_MULTI Geert Uytterhoeven
2015-11-12 15:54   ` Geert Uytterhoeven
2015-11-12 15:54 ` [PATCH v6 2/5] clk: shmobile: div6: Make clock-output-names optional Geert Uytterhoeven
2015-11-12 15:54   ` Geert Uytterhoeven
2015-11-12 15:54 ` [PATCH v6 3/5] clk: shmobile: div6: Extract cpg_div6_register() Geert Uytterhoeven
2015-11-12 15:54   ` Geert Uytterhoeven
2015-11-12 15:54 ` [PATCH v6 4/5] clk: shmobile: Add new CPG/MSSR driver core Geert Uytterhoeven
2015-11-12 15:54   ` Geert Uytterhoeven
2015-12-05  3:08   ` Laurent Pinchart
2015-12-05  3:08     ` Laurent Pinchart
2015-12-08  9:38     ` Geert Uytterhoeven
2015-12-08  9:38       ` Geert Uytterhoeven
2015-11-12 15:54 ` [PATCH v6 5/5] clk: shmobile: r8a7795: Add new CPG/MSSR driver Geert Uytterhoeven
2015-11-12 15:54   ` Geert Uytterhoeven
2017-10-25  6:12   ` clk: r8a7795: Why to read EXTAL* from DT? (was: Re: [PATCH v6 5/5] clk: shmobile: r8a7795: Add new CPG/MSSR driver) Dirk Behme
2017-10-25 10:27     ` Geert Uytterhoeven
2015-12-04  9:04 ` [PATCH v6 0/5] clk: shmobile: Add new CPG/MSSR driver Geert Uytterhoeven
2015-12-04  9:04   ` Geert Uytterhoeven

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.