All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
To: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>,
	Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	<devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <srv_heupstream@mediatek.com>,
	Andrew-CT Chen <andrew-ct.chen@mediatek.com>
Subject: [PATCH v2 2/3] nvmem: mediatek: Add Mediatek EFUSE driver
Date: Thu, 19 Nov 2015 18:46:53 +0800	[thread overview]
Message-ID: <1447930014-19579-3-git-send-email-andrew-ct.chen@mediatek.com> (raw)
In-Reply-To: <1447930014-19579-1-git-send-email-andrew-ct.chen@mediatek.com>

Add Mediatek EFUSE driver to access hardware data like
thermal sensor calibration or HDMI impedance.

Signed-off-by: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
---
 drivers/nvmem/Kconfig     | 11 ++++++
 drivers/nvmem/Makefile    |  2 ++
 drivers/nvmem/mtk-efuse.c | 89 +++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 102 insertions(+)
 create mode 100644 drivers/nvmem/mtk-efuse.c

diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index bc4ea58..ea7ec17 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -36,6 +36,17 @@ config NVMEM_MXS_OCOTP
 	  This driver can also be built as a module. If so, the module
 	  will be called nvmem-mxs-ocotp.
 
+config MTK_EFUSE
+	tristate "Mediatek SoCs EFUSE support"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	select REGMAP_MMIO
+	help
+	  This is a driver to access hardware related data like sensor
+	  calibration, HDMI impedance etc.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called efuse-mtk.
+
 config QCOM_QFPROM
 	tristate "QCOM QFPROM Support"
 	depends on ARCH_QCOM || COMPILE_TEST
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index 95dde3f..a59b069 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -10,6 +10,8 @@ obj-$(CONFIG_NVMEM_IMX_OCOTP)	+= nvmem-imx-ocotp.o
 nvmem-imx-ocotp-y		:= imx-ocotp.o
 obj-$(CONFIG_NVMEM_MXS_OCOTP)	+= nvmem-mxs-ocotp.o
 nvmem-mxs-ocotp-y		:= mxs-ocotp.o
+obj-$(CONFIG_MTK_EFUSE)		+= nvmem_mtk-efuse.o
+nvmem_mtk-efuse-y		:= mtk-efuse.o
 obj-$(CONFIG_QCOM_QFPROM)	+= nvmem_qfprom.o
 nvmem_qfprom-y			:= qfprom.o
 obj-$(CONFIG_ROCKCHIP_EFUSE)	+= nvmem_rockchip_efuse.o
diff --git a/drivers/nvmem/mtk-efuse.c b/drivers/nvmem/mtk-efuse.c
new file mode 100644
index 0000000..7b35f5b
--- /dev/null
+++ b/drivers/nvmem/mtk-efuse.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+static struct regmap_config mtk_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
+static int mtk_efuse_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct nvmem_device *nvmem;
+	struct nvmem_config *econfig;
+	struct regmap *regmap;
+	void __iomem *base;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	econfig = devm_kzalloc(dev, sizeof(*econfig), GFP_KERNEL);
+	if (!econfig)
+		return -ENOMEM;
+
+	mtk_regmap_config.max_register = resource_size(res) - 1;
+
+	regmap = devm_regmap_init_mmio(dev, base, &mtk_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "regmap init failed\n");
+		return PTR_ERR(regmap);
+	}
+
+	econfig->dev = dev;
+	econfig->owner = THIS_MODULE;
+	nvmem = nvmem_register(econfig);
+	if (IS_ERR(nvmem))
+		return PTR_ERR(nvmem);
+
+	platform_set_drvdata(pdev, nvmem);
+
+	return 0;
+}
+
+static int mtk_efuse_remove(struct platform_device *pdev)
+{
+	struct nvmem_device *nvmem = platform_get_drvdata(pdev);
+
+	return nvmem_unregister(nvmem);
+}
+
+static const struct of_device_id mtk_efuse_of_match[] = {
+	{ .compatible = "mediatek,mt8173-efuse",},
+	{ .compatible = "mediatek,efuse",},
+	{/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, mtk_efuse_of_match);
+
+static struct platform_driver mtk_efuse_driver = {
+	.probe = mtk_efuse_probe,
+	.remove = mtk_efuse_remove,
+	.driver = {
+		.name = "mediatek,efuse",
+		.of_match_table = mtk_efuse_of_match,
+	},
+};
+module_platform_driver(mtk_efuse_driver);
+MODULE_AUTHOR("Andrew-CT Chen <andrew-ct.chen@mediatek.com>");
+MODULE_DESCRIPTION("Mediatek EFUSE driver");
+MODULE_LICENSE("GPL v2");
-- 
1.9.1


WARNING: multiple messages have this Message-ID (diff)
From: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
To: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>,
	Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
	srv_heupstream@mediatek.com,
	Andrew-CT Chen <andrew-ct.chen@mediatek.com>
Subject: [PATCH v2 2/3] nvmem: mediatek: Add Mediatek EFUSE driver
Date: Thu, 19 Nov 2015 18:46:53 +0800	[thread overview]
Message-ID: <1447930014-19579-3-git-send-email-andrew-ct.chen@mediatek.com> (raw)
In-Reply-To: <1447930014-19579-1-git-send-email-andrew-ct.chen@mediatek.com>

Add Mediatek EFUSE driver to access hardware data like
thermal sensor calibration or HDMI impedance.

Signed-off-by: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
---
 drivers/nvmem/Kconfig     | 11 ++++++
 drivers/nvmem/Makefile    |  2 ++
 drivers/nvmem/mtk-efuse.c | 89 +++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 102 insertions(+)
 create mode 100644 drivers/nvmem/mtk-efuse.c

diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index bc4ea58..ea7ec17 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -36,6 +36,17 @@ config NVMEM_MXS_OCOTP
 	  This driver can also be built as a module. If so, the module
 	  will be called nvmem-mxs-ocotp.
 
+config MTK_EFUSE
+	tristate "Mediatek SoCs EFUSE support"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	select REGMAP_MMIO
+	help
+	  This is a driver to access hardware related data like sensor
+	  calibration, HDMI impedance etc.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called efuse-mtk.
+
 config QCOM_QFPROM
 	tristate "QCOM QFPROM Support"
 	depends on ARCH_QCOM || COMPILE_TEST
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index 95dde3f..a59b069 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -10,6 +10,8 @@ obj-$(CONFIG_NVMEM_IMX_OCOTP)	+= nvmem-imx-ocotp.o
 nvmem-imx-ocotp-y		:= imx-ocotp.o
 obj-$(CONFIG_NVMEM_MXS_OCOTP)	+= nvmem-mxs-ocotp.o
 nvmem-mxs-ocotp-y		:= mxs-ocotp.o
+obj-$(CONFIG_MTK_EFUSE)		+= nvmem_mtk-efuse.o
+nvmem_mtk-efuse-y		:= mtk-efuse.o
 obj-$(CONFIG_QCOM_QFPROM)	+= nvmem_qfprom.o
 nvmem_qfprom-y			:= qfprom.o
 obj-$(CONFIG_ROCKCHIP_EFUSE)	+= nvmem_rockchip_efuse.o
diff --git a/drivers/nvmem/mtk-efuse.c b/drivers/nvmem/mtk-efuse.c
new file mode 100644
index 0000000..7b35f5b
--- /dev/null
+++ b/drivers/nvmem/mtk-efuse.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+static struct regmap_config mtk_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
+static int mtk_efuse_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct nvmem_device *nvmem;
+	struct nvmem_config *econfig;
+	struct regmap *regmap;
+	void __iomem *base;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	econfig = devm_kzalloc(dev, sizeof(*econfig), GFP_KERNEL);
+	if (!econfig)
+		return -ENOMEM;
+
+	mtk_regmap_config.max_register = resource_size(res) - 1;
+
+	regmap = devm_regmap_init_mmio(dev, base, &mtk_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "regmap init failed\n");
+		return PTR_ERR(regmap);
+	}
+
+	econfig->dev = dev;
+	econfig->owner = THIS_MODULE;
+	nvmem = nvmem_register(econfig);
+	if (IS_ERR(nvmem))
+		return PTR_ERR(nvmem);
+
+	platform_set_drvdata(pdev, nvmem);
+
+	return 0;
+}
+
+static int mtk_efuse_remove(struct platform_device *pdev)
+{
+	struct nvmem_device *nvmem = platform_get_drvdata(pdev);
+
+	return nvmem_unregister(nvmem);
+}
+
+static const struct of_device_id mtk_efuse_of_match[] = {
+	{ .compatible = "mediatek,mt8173-efuse",},
+	{ .compatible = "mediatek,efuse",},
+	{/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, mtk_efuse_of_match);
+
+static struct platform_driver mtk_efuse_driver = {
+	.probe = mtk_efuse_probe,
+	.remove = mtk_efuse_remove,
+	.driver = {
+		.name = "mediatek,efuse",
+		.of_match_table = mtk_efuse_of_match,
+	},
+};
+module_platform_driver(mtk_efuse_driver);
+MODULE_AUTHOR("Andrew-CT Chen <andrew-ct.chen@mediatek.com>");
+MODULE_DESCRIPTION("Mediatek EFUSE driver");
+MODULE_LICENSE("GPL v2");
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: andrew-ct.chen@mediatek.com (Andrew-CT Chen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/3] nvmem: mediatek: Add Mediatek EFUSE driver
Date: Thu, 19 Nov 2015 18:46:53 +0800	[thread overview]
Message-ID: <1447930014-19579-3-git-send-email-andrew-ct.chen@mediatek.com> (raw)
In-Reply-To: <1447930014-19579-1-git-send-email-andrew-ct.chen@mediatek.com>

Add Mediatek EFUSE driver to access hardware data like
thermal sensor calibration or HDMI impedance.

Signed-off-by: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
---
 drivers/nvmem/Kconfig     | 11 ++++++
 drivers/nvmem/Makefile    |  2 ++
 drivers/nvmem/mtk-efuse.c | 89 +++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 102 insertions(+)
 create mode 100644 drivers/nvmem/mtk-efuse.c

diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index bc4ea58..ea7ec17 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -36,6 +36,17 @@ config NVMEM_MXS_OCOTP
 	  This driver can also be built as a module. If so, the module
 	  will be called nvmem-mxs-ocotp.
 
+config MTK_EFUSE
+	tristate "Mediatek SoCs EFUSE support"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	select REGMAP_MMIO
+	help
+	  This is a driver to access hardware related data like sensor
+	  calibration, HDMI impedance etc.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called efuse-mtk.
+
 config QCOM_QFPROM
 	tristate "QCOM QFPROM Support"
 	depends on ARCH_QCOM || COMPILE_TEST
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index 95dde3f..a59b069 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -10,6 +10,8 @@ obj-$(CONFIG_NVMEM_IMX_OCOTP)	+= nvmem-imx-ocotp.o
 nvmem-imx-ocotp-y		:= imx-ocotp.o
 obj-$(CONFIG_NVMEM_MXS_OCOTP)	+= nvmem-mxs-ocotp.o
 nvmem-mxs-ocotp-y		:= mxs-ocotp.o
+obj-$(CONFIG_MTK_EFUSE)		+= nvmem_mtk-efuse.o
+nvmem_mtk-efuse-y		:= mtk-efuse.o
 obj-$(CONFIG_QCOM_QFPROM)	+= nvmem_qfprom.o
 nvmem_qfprom-y			:= qfprom.o
 obj-$(CONFIG_ROCKCHIP_EFUSE)	+= nvmem_rockchip_efuse.o
diff --git a/drivers/nvmem/mtk-efuse.c b/drivers/nvmem/mtk-efuse.c
new file mode 100644
index 0000000..7b35f5b
--- /dev/null
+++ b/drivers/nvmem/mtk-efuse.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+static struct regmap_config mtk_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
+static int mtk_efuse_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct nvmem_device *nvmem;
+	struct nvmem_config *econfig;
+	struct regmap *regmap;
+	void __iomem *base;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	econfig = devm_kzalloc(dev, sizeof(*econfig), GFP_KERNEL);
+	if (!econfig)
+		return -ENOMEM;
+
+	mtk_regmap_config.max_register = resource_size(res) - 1;
+
+	regmap = devm_regmap_init_mmio(dev, base, &mtk_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "regmap init failed\n");
+		return PTR_ERR(regmap);
+	}
+
+	econfig->dev = dev;
+	econfig->owner = THIS_MODULE;
+	nvmem = nvmem_register(econfig);
+	if (IS_ERR(nvmem))
+		return PTR_ERR(nvmem);
+
+	platform_set_drvdata(pdev, nvmem);
+
+	return 0;
+}
+
+static int mtk_efuse_remove(struct platform_device *pdev)
+{
+	struct nvmem_device *nvmem = platform_get_drvdata(pdev);
+
+	return nvmem_unregister(nvmem);
+}
+
+static const struct of_device_id mtk_efuse_of_match[] = {
+	{ .compatible = "mediatek,mt8173-efuse",},
+	{ .compatible = "mediatek,efuse",},
+	{/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, mtk_efuse_of_match);
+
+static struct platform_driver mtk_efuse_driver = {
+	.probe = mtk_efuse_probe,
+	.remove = mtk_efuse_remove,
+	.driver = {
+		.name = "mediatek,efuse",
+		.of_match_table = mtk_efuse_of_match,
+	},
+};
+module_platform_driver(mtk_efuse_driver);
+MODULE_AUTHOR("Andrew-CT Chen <andrew-ct.chen@mediatek.com>");
+MODULE_DESCRIPTION("Mediatek EFUSE driver");
+MODULE_LICENSE("GPL v2");
-- 
1.9.1

  parent reply	other threads:[~2015-11-19 10:47 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-19 10:46 [PATCH v2 0/3] Mediatek EFUSE Support Andrew-CT Chen
2015-11-19 10:46 ` Andrew-CT Chen
2015-11-19 10:46 ` Andrew-CT Chen
2015-11-19 10:46 ` [PATCH v2 1/3] dt-bindings: add document of mediatek efuse driver Andrew-CT Chen
2015-11-19 10:46   ` Andrew-CT Chen
2015-11-19 10:46   ` Andrew-CT Chen
2015-11-20 15:40   ` Rob Herring
2015-11-20 15:40     ` Rob Herring
2015-11-19 10:46 ` Andrew-CT Chen [this message]
2015-11-19 10:46   ` [PATCH v2 2/3] nvmem: mediatek: Add Mediatek EFUSE driver Andrew-CT Chen
2015-11-19 10:46   ` Andrew-CT Chen
2015-12-08  4:52   ` Nicolas Boichat
2015-12-08  4:52     ` Nicolas Boichat
2015-12-08  4:52     ` Nicolas Boichat
2015-11-19 10:46 ` [PATCH v2 3/3] dts: arm64: Add EFUSE device node Andrew-CT Chen
2015-11-19 10:46   ` Andrew-CT Chen
2015-11-19 10:46   ` Andrew-CT Chen
2016-02-10 17:48   ` Matthias Brugger
2016-02-10 17:48     ` Matthias Brugger
2016-02-10 17:48     ` Matthias Brugger
2015-12-14  4:27 ` [PATCH v2 0/3] Mediatek EFUSE Support Daniel Kurtz
2015-12-14  4:27   ` Daniel Kurtz
2015-12-14  4:27   ` Daniel Kurtz
2015-12-14 10:07   ` Srinivas Kandagatla
2015-12-14 10:07     ` Srinivas Kandagatla
2015-12-14 10:07     ` Srinivas Kandagatla
2016-01-21  9:33     ` Matthias Brugger
2016-01-21  9:33       ` Matthias Brugger
2016-01-21  9:33       ` Matthias Brugger
2016-01-21 14:32       ` Srinivas Kandagatla
2016-01-21 14:32         ` Srinivas Kandagatla
2016-01-21 14:32         ` Srinivas Kandagatla
2016-01-21 14:46         ` Matthias Brugger
2016-01-21 14:46           ` Matthias Brugger
2016-01-21 14:46           ` Matthias Brugger
2016-01-21 14:49           ` Srinivas Kandagatla
2016-01-21 14:49             ` Srinivas Kandagatla
2016-01-21 14:49             ` Srinivas Kandagatla
2016-02-01 10:23             ` Matthias Brugger
2016-02-01 10:23               ` Matthias Brugger
2016-02-01 10:23               ` Matthias Brugger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1447930014-19579-3-git-send-email-andrew-ct.chen@mediatek.com \
    --to=andrew-ct.chen@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=maxime.ripard@free-electrons.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=srv_heupstream@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.