From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> To: <cw00.choi@samsung.com> Cc: <myungjoo.ham@samsung.com>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <patches@opensource.wolfsonmicro.com> Subject: [PATCH v3 3/6] extcon: arizona: Add device binding for jack detect polarity inversion Date: Thu, 19 Nov 2015 15:45:37 +0000 [thread overview] Message-ID: <1447947940-3054-4-git-send-email-ckeepax@opensource.wolfsonmicro.com> (raw) In-Reply-To: <1447947940-3054-1-git-send-email-ckeepax@opensource.wolfsonmicro.com> By default the driver expects the jackdet pin to be pulled low when a jack is inserted. This patch adds a device binding that allows the user to specify that the jackdet pin will be pulled high when a jack is inserted. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> --- drivers/extcon/extcon-arizona.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index 493da5b..27ddf9c 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -1239,6 +1239,9 @@ static int arizona_extcon_device_get_pdata(struct arizona *arizona) pdata->micd_software_compare = device_property_read_bool(arizona->dev, "wlf,micd-software-compare"); + pdata->jd_invert = device_property_read_bool(arizona->dev, + "wlf,jd-invert"); + device_property_read_u32(arizona->dev, "wlf,gpsw", &pdata->gpsw); return 0; -- 1.7.2.5
WARNING: multiple messages have this Message-ID (diff)
From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> To: cw00.choi@samsung.com Cc: myungjoo.ham@samsung.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, patches@opensource.wolfsonmicro.com Subject: [PATCH v3 3/6] extcon: arizona: Add device binding for jack detect polarity inversion Date: Thu, 19 Nov 2015 15:45:37 +0000 [thread overview] Message-ID: <1447947940-3054-4-git-send-email-ckeepax@opensource.wolfsonmicro.com> (raw) In-Reply-To: <1447947940-3054-1-git-send-email-ckeepax@opensource.wolfsonmicro.com> By default the driver expects the jackdet pin to be pulled low when a jack is inserted. This patch adds a device binding that allows the user to specify that the jackdet pin will be pulled high when a jack is inserted. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> --- drivers/extcon/extcon-arizona.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index 493da5b..27ddf9c 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -1239,6 +1239,9 @@ static int arizona_extcon_device_get_pdata(struct arizona *arizona) pdata->micd_software_compare = device_property_read_bool(arizona->dev, "wlf,micd-software-compare"); + pdata->jd_invert = device_property_read_bool(arizona->dev, + "wlf,jd-invert"); + device_property_read_u32(arizona->dev, "wlf,gpsw", &pdata->gpsw); return 0; -- 1.7.2.5
next prev parent reply other threads:[~2015-11-19 16:01 UTC|newest] Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-11-19 15:45 [PATCH v3 0/6] Arizona Extcon Update Device Bindings Charles Keepax 2015-11-19 15:45 ` Charles Keepax 2015-11-19 15:45 ` [PATCH v3 1/6] extcon: arizona: Add device binding to enable ADC mode micdet Charles Keepax 2015-11-19 15:45 ` Charles Keepax 2015-11-19 15:45 ` [PATCH v3 2/6] extcon: arizona: Add device binding for the general purpose switch Charles Keepax 2015-11-19 15:45 ` Charles Keepax 2015-11-19 15:45 ` Charles Keepax [this message] 2015-11-19 15:45 ` [PATCH v3 3/6] extcon: arizona: Add device binding for jack detect polarity inversion Charles Keepax 2015-11-19 15:45 ` [PATCH v3 4/6] extcon: arizona: Add device binding for second jack detect pin on GPIO5 Charles Keepax 2015-11-19 15:45 ` Charles Keepax 2015-11-19 15:45 ` [PATCH v3 5/6] extcon: arizona: Update DT binding documentation for mic detection Charles Keepax 2015-11-19 15:45 ` Charles Keepax 2015-11-20 15:58 ` Rob Herring 2015-11-20 15:58 ` Rob Herring 2015-11-20 16:20 ` Charles Keepax 2015-11-20 16:20 ` Charles Keepax 2015-11-19 15:45 ` [PATCH v3 6/6] extcon: arizona: Update DT binding documentation for jack detection Charles Keepax 2015-11-19 15:45 ` Charles Keepax 2015-11-20 2:06 ` Chanwoo Choi 2015-11-20 2:06 ` Chanwoo Choi 2015-11-20 2:07 ` [PATCH v3 0/6] Arizona Extcon Update Device Bindings Chanwoo Choi
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1447947940-3054-4-git-send-email-ckeepax@opensource.wolfsonmicro.com \ --to=ckeepax@opensource.wolfsonmicro.com \ --cc=cw00.choi@samsung.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=myungjoo.ham@samsung.com \ --cc=patches@opensource.wolfsonmicro.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.