From: Geert Uytterhoeven <geert+renesas@glider.be> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Simon Horman <horms@verge.net.au>, Magnus Damm <magnus.damm@gmail.com>, Yoshinori Sato <ysato@users.sourceforge.jp>, Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: linux-serial@vger.kernel.org, linux-sh@vger.kernel.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH v2 14/16] arm64: renesas: r8a7795 dtsi: Rename the serial port clock to fck Date: Thu, 19 Nov 2015 18:36:11 +0000 [thread overview] Message-ID: <1447958173-543-15-git-send-email-geert+renesas@glider.be> (raw) In-Reply-To: <1447958173-543-1-git-send-email-geert+renesas@glider.be> The clock is really the device functional clock, not the interface clock. Rename it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- v2: - New. --- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index 979a087d2b596c03..53a2a8fb42b7480c 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -363,7 +363,7 @@ reg = <0 0xe6540000 0 96>; interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 520>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x31>, <&dmac1 0x30>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -375,7 +375,7 @@ reg = <0 0xe6550000 0 96>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 519>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x33>, <&dmac1 0x32>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -387,7 +387,7 @@ reg = <0 0xe6560000 0 96>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 518>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x35>, <&dmac1 0x34>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -399,7 +399,7 @@ reg = <0 0xe66a0000 0 96>; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 517>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x37>, <&dmac0 0x36>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -411,7 +411,7 @@ reg = <0 0xe66b0000 0 96>; interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 516>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x39>, <&dmac0 0x38>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -423,7 +423,7 @@ reg = <0 0xe6e60000 0 64>; interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 207>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x51>, <&dmac1 0x50>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -435,7 +435,7 @@ reg = <0 0xe6e68000 0 64>; interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 206>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x53>, <&dmac1 0x52>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -447,7 +447,7 @@ reg = <0 0xe6e88000 0 64>; interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 310>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x13>, <&dmac1 0x12>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -459,7 +459,7 @@ reg = <0 0xe6c50000 0 64>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 204>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x57>, <&dmac0 0x56>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -471,7 +471,7 @@ reg = <0 0xe6c40000 0 64>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 203>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x59>, <&dmac0 0x58>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -483,7 +483,7 @@ reg = <0 0xe6f30000 0 64>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 202>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x5b>, <&dmac1 0x5a>; dma-names = "tx", "rx"; power-domains = <&cpg>; -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Geert Uytterhoeven <geert+renesas@glider.be> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Simon Horman <horms@verge.net.au>, Magnus Damm <magnus.damm@gmail.com>, Yoshinori Sato <ysato@users.sourceforge.jp>, Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: linux-serial@vger.kernel.org, linux-sh@vger.kernel.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH v2 14/16] arm64: renesas: r8a7795 dtsi: Rename the serial port clock to fck Date: Thu, 19 Nov 2015 19:36:11 +0100 [thread overview] Message-ID: <1447958173-543-15-git-send-email-geert+renesas@glider.be> (raw) In-Reply-To: <1447958173-543-1-git-send-email-geert+renesas@glider.be> The clock is really the device functional clock, not the interface clock. Rename it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- v2: - New. --- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index 979a087d2b596c03..53a2a8fb42b7480c 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -363,7 +363,7 @@ reg = <0 0xe6540000 0 96>; interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 520>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x31>, <&dmac1 0x30>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -375,7 +375,7 @@ reg = <0 0xe6550000 0 96>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 519>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x33>, <&dmac1 0x32>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -387,7 +387,7 @@ reg = <0 0xe6560000 0 96>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 518>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x35>, <&dmac1 0x34>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -399,7 +399,7 @@ reg = <0 0xe66a0000 0 96>; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 517>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x37>, <&dmac0 0x36>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -411,7 +411,7 @@ reg = <0 0xe66b0000 0 96>; interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 516>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x39>, <&dmac0 0x38>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -423,7 +423,7 @@ reg = <0 0xe6e60000 0 64>; interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 207>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x51>, <&dmac1 0x50>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -435,7 +435,7 @@ reg = <0 0xe6e68000 0 64>; interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 206>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x53>, <&dmac1 0x52>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -447,7 +447,7 @@ reg = <0 0xe6e88000 0 64>; interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 310>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x13>, <&dmac1 0x12>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -459,7 +459,7 @@ reg = <0 0xe6c50000 0 64>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 204>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x57>, <&dmac0 0x56>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -471,7 +471,7 @@ reg = <0 0xe6c40000 0 64>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 203>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x59>, <&dmac0 0x58>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -483,7 +483,7 @@ reg = <0 0xe6f30000 0 64>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 202>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x5b>, <&dmac1 0x5a>; dma-names = "tx", "rx"; power-domains = <&cpg>; -- 1.9.1
next prev parent reply other threads:[~2015-11-19 18:36 UTC|newest] Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-11-19 18:35 [PATCH v2 00/16] serial: sh-sci: Clock Cleanups Geert Uytterhoeven 2015-11-19 18:35 ` Geert Uytterhoeven [not found] ` <1447958173-543-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org> 2015-11-19 18:35 ` [PATCH v2 01/16] serial: sh-sci: Drop the interface clock Geert Uytterhoeven 2015-11-19 18:35 ` Geert Uytterhoeven 2015-11-20 16:27 ` Rob Herring 2015-11-20 16:27 ` Rob Herring 2015-12-13 6:42 ` Greg Kroah-Hartman 2015-12-13 6:42 ` Greg Kroah-Hartman 2015-12-14 8:15 ` Simon Horman 2015-12-14 8:15 ` Simon Horman [not found] ` <20151214081540.GD9929-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org> 2015-12-14 8:16 ` Simon Horman 2015-12-14 8:16 ` Simon Horman 2015-11-19 18:35 ` [PATCH v2 02/16] sh: Rename sci_ick and sci_fck clock to fck Geert Uytterhoeven 2015-11-19 18:35 ` Geert Uytterhoeven 2015-11-19 18:36 ` [PATCH v2 03/16] sh: Remove sci_ick clock alias Geert Uytterhoeven 2015-11-19 18:36 ` Geert Uytterhoeven 2015-11-19 18:36 ` [PATCH v2 04/16] ARM: shmobile: sh73a0 dtsi: Rename the serial port clock to fck Geert Uytterhoeven 2015-11-19 18:36 ` Geert Uytterhoeven 2015-11-19 18:36 ` [PATCH v2 05/16] ARM: shmobile: r7s72100 " Geert Uytterhoeven 2015-11-19 18:36 ` Geert Uytterhoeven 2015-11-19 18:36 ` [PATCH v2 06/16] ARM: shmobile: r8a73a4 " Geert Uytterhoeven 2015-11-19 18:36 ` Geert Uytterhoeven 2015-11-19 18:36 ` [PATCH v2 07/16] ARM: shmobile: r8a7740 " Geert Uytterhoeven 2015-11-19 18:36 ` Geert Uytterhoeven 2015-11-19 18:36 ` [PATCH v2 08/16] ARM: shmobile: r8a7778 " Geert Uytterhoeven 2015-11-19 18:36 ` Geert Uytterhoeven 2015-11-19 18:36 ` [PATCH v2 09/16] ARM: shmobile: r8a7779 " Geert Uytterhoeven 2015-11-19 18:36 ` Geert Uytterhoeven 2015-11-19 18:36 ` [PATCH v2 10/16] ARM: shmobile: r8a7790 " Geert Uytterhoeven 2015-11-19 18:36 ` Geert Uytterhoeven 2015-11-19 18:36 ` [PATCH v2 11/16] ARM: shmobile: r8a7791 " Geert Uytterhoeven 2015-11-19 18:36 ` Geert Uytterhoeven 2015-11-19 18:36 ` [PATCH v2 12/16] ARM: shmobile: r8a7793 " Geert Uytterhoeven 2015-11-19 18:36 ` Geert Uytterhoeven 2015-12-14 8:15 ` Simon Horman 2015-12-14 8:15 ` Simon Horman 2015-11-19 18:36 ` [PATCH v2 13/16] ARM: shmobile: r8a7794 " Geert Uytterhoeven 2015-11-19 18:36 ` Geert Uytterhoeven 2015-11-19 18:36 ` Geert Uytterhoeven [this message] 2015-11-19 18:36 ` [PATCH v2 14/16] arm64: renesas: r8a7795 " Geert Uytterhoeven 2015-11-19 18:43 ` Laurent Pinchart 2015-11-19 18:43 ` Laurent Pinchart 2015-11-19 18:36 ` [PATCH v2 15/16] h8300: dts: " Geert Uytterhoeven 2015-11-19 18:36 ` Geert Uytterhoeven 2015-11-19 18:43 ` Laurent Pinchart 2015-11-19 18:43 ` Laurent Pinchart 2015-11-19 18:36 ` [PATCH v2 16/16] serial: sh-sci: Drop the sci_fck clock fallback Geert Uytterhoeven 2015-11-19 18:36 ` Geert Uytterhoeven 2015-12-13 6:42 ` Greg Kroah-Hartman 2015-12-13 6:42 ` Greg Kroah-Hartman 2015-11-24 2:44 ` [PATCH v2 00/16] serial: sh-sci: Clock Cleanups Simon Horman 2015-11-24 2:44 ` Simon Horman 2015-12-14 8:15 ` Simon Horman 2015-12-14 8:15 ` Simon Horman 2015-12-14 8:31 ` Geert Uytterhoeven 2015-12-14 8:31 ` Geert Uytterhoeven 2015-12-14 9:11 ` Simon Horman 2015-12-14 9:11 ` Simon Horman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1447958173-543-15-git-send-email-geert+renesas@glider.be \ --to=geert+renesas@glider.be \ --cc=gregkh@linuxfoundation.org \ --cc=horms@verge.net.au \ --cc=laurent.pinchart+renesas@ideasonboard.com \ --cc=linux-serial@vger.kernel.org \ --cc=linux-sh@vger.kernel.org \ --cc=magnus.damm@gmail.com \ --cc=ysato@users.sourceforge.jp \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.