All of lore.kernel.org
 help / color / mirror / Atom feed
From: Heiko Stuebner <heiko@sntech.de>
To: kishon@ti.com, mturquette@baylibre.com, sboyd@codeaurora.org
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org,
	dianders@chromium.org, romain.perier@gmail.com, arnd@arndb.de,
	hl@rock-chips.com, Heiko Stuebner <heiko@sntech.de>
Subject: [PATCH v3 7/8] clk: rockchip: fix usbphy-related clocks
Date: Thu, 19 Nov 2015 22:22:28 +0100	[thread overview]
Message-ID: <1447968149-10979-8-git-send-email-heiko@sntech.de> (raw)
In-Reply-To: <1447968149-10979-1-git-send-email-heiko@sntech.de>

The otgphy clocks really only drive the phy blocks. These in turn
contain plls that then generate the 480m clocks the clock controller
uses to supply some other clocks like uart0, gpu or the video-codec.

So fix this structure to actually respect that hirarchy and removed
that usb480m fixed-rate clock working as a placeholder till now, as
this wouldn't even work if the supplying phy gets turned off while
its pll-output gets used elsewhere.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 arch/arm/boot/dts/rk3288-veyron.dtsi |  2 +-
 drivers/clk/rockchip/clk-rk3188.c    | 11 +++--------
 drivers/clk/rockchip/clk-rk3288.c    | 16 +++++-----------
 3 files changed, 9 insertions(+), 20 deletions(-)

diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 5e61f07..0a43e21 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -416,7 +416,7 @@
 	status = "okay";
 
 	assigned-clocks = <&cru SCLK_USBPHY480M_SRC>;
-	assigned-clock-parents = <&cru SCLK_OTGPHY0>;
+	assigned-clock-parents = <&usbphy0>;
 	dr_mode = "host";
 };
 
diff --git a/drivers/clk/rockchip/clk-rk3188.c b/drivers/clk/rockchip/clk-rk3188.c
index abb4760..7836a97 100644
--- a/drivers/clk/rockchip/clk-rk3188.c
+++ b/drivers/clk/rockchip/clk-rk3188.c
@@ -319,9 +319,9 @@ static struct rockchip_clk_branch common_clk_branches[] __initdata = {
 	 * the 480m are generated inside the usb block from these clocks,
 	 * but they are also a source for the hsicphy clock.
 	 */
-	GATE(SCLK_OTGPHY0, "sclk_otgphy0", "usb480m", CLK_IGNORE_UNUSED,
+	GATE(SCLK_OTGPHY0, "sclk_otgphy0", "xin24m", CLK_IGNORE_UNUSED,
 			RK2928_CLKGATE_CON(1), 5, GFLAGS),
-	GATE(SCLK_OTGPHY1, "sclk_otgphy1", "usb480m", CLK_IGNORE_UNUSED,
+	GATE(SCLK_OTGPHY1, "sclk_otgphy1", "xin24m", CLK_IGNORE_UNUSED,
 			RK2928_CLKGATE_CON(1), 6, GFLAGS),
 
 	COMPOSITE(0, "mac_src", mux_mac_p, 0,
@@ -635,7 +635,7 @@ static struct clk_div_table div_rk3188_aclk_core_t[] = {
 	{ /* sentinel */ },
 };
 
-PNAME(mux_hsicphy_p)		= { "sclk_otgphy0", "sclk_otgphy1",
+PNAME(mux_hsicphy_p)		= { "sclk_otgphy0_480m", "sclk_otgphy1_480m",
 				    "gpll", "cpll" };
 
 static struct rockchip_clk_branch rk3188_clk_branches[] __initdata = {
@@ -739,11 +739,6 @@ static void __init rk3188_common_clk_init(struct device_node *np)
 		pr_warn("%s: could not register clock xin12m: %ld\n",
 			__func__, PTR_ERR(clk));
 
-	clk = clk_register_fixed_factor(NULL, "usb480m", "xin24m", 0, 20, 1);
-	if (IS_ERR(clk))
-		pr_warn("%s: could not register clock usb480m: %ld\n",
-			__func__, PTR_ERR(clk));
-
 	rockchip_clk_register_branches(common_clk_branches,
 				  ARRAY_SIZE(common_clk_branches));
 
diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
index 9040878..7c8a3e9 100644
--- a/drivers/clk/rockchip/clk-rk3288.c
+++ b/drivers/clk/rockchip/clk-rk3288.c
@@ -195,8 +195,8 @@ PNAME(mux_hsadcout_p)	= { "hsadc_src", "ext_hsadc" };
 PNAME(mux_edp_24m_p)	= { "ext_edp_24m", "xin24m" };
 PNAME(mux_tspout_p)	= { "cpll", "gpll", "npll", "xin27m" };
 
-PNAME(mux_usbphy480m_p)		= { "sclk_otgphy1", "sclk_otgphy2",
-				    "sclk_otgphy0" };
+PNAME(mux_usbphy480m_p)		= { "sclk_otgphy1_480m", "sclk_otgphy2_480m",
+				    "sclk_otgphy0_480m" };
 PNAME(mux_hsicphy480m_p)	= { "cpll", "gpll", "usbphy480m_src" };
 PNAME(mux_hsicphy12m_p)		= { "hsicphy12m_xin12m", "hsicphy12m_usbphy" };
 
@@ -506,11 +506,11 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
 			RK3288_CLKSEL_CON(35), 6, 2, MFLAGS, 0, 5, DFLAGS,
 			RK3288_CLKGATE_CON(4), 10, GFLAGS),
 
-	GATE(SCLK_OTGPHY0, "sclk_otgphy0", "usb480m", CLK_IGNORE_UNUSED,
+	GATE(SCLK_OTGPHY0, "sclk_otgphy0", "xin24m", CLK_IGNORE_UNUSED,
 			RK3288_CLKGATE_CON(13), 4, GFLAGS),
-	GATE(SCLK_OTGPHY1, "sclk_otgphy1", "usb480m", CLK_IGNORE_UNUSED,
+	GATE(SCLK_OTGPHY1, "sclk_otgphy1", "xin24m", CLK_IGNORE_UNUSED,
 			RK3288_CLKGATE_CON(13), 5, GFLAGS),
-	GATE(SCLK_OTGPHY2, "sclk_otgphy2", "usb480m", CLK_IGNORE_UNUSED,
+	GATE(SCLK_OTGPHY2, "sclk_otgphy2", "xin24m", CLK_IGNORE_UNUSED,
 			RK3288_CLKGATE_CON(13), 6, GFLAGS),
 	GATE(SCLK_OTG_ADP, "sclk_otg_adp", "xin32k", CLK_IGNORE_UNUSED,
 			RK3288_CLKGATE_CON(13), 7, GFLAGS),
@@ -874,12 +874,6 @@ static void __init rk3288_clk_init(struct device_node *np)
 		pr_warn("%s: could not register clock xin12m: %ld\n",
 			__func__, PTR_ERR(clk));
 
-
-	clk = clk_register_fixed_factor(NULL, "usb480m", "xin24m", 0, 20, 1);
-	if (IS_ERR(clk))
-		pr_warn("%s: could not register clock usb480m: %ld\n",
-			__func__, PTR_ERR(clk));
-
 	clk = clk_register_fixed_factor(NULL, "hclk_vcodec_pre",
 					"hclk_vcodec_pre_v", 0, 1, 4);
 	if (IS_ERR(clk))
-- 
2.6.2


WARNING: multiple messages have this Message-ID (diff)
From: Heiko Stuebner <heiko@sntech.de>
To: kishon@ti.com, mturquette@baylibre.com, sboyd@codeaurora.org
Cc: hl@rock-chips.com, arnd@arndb.de, linux-kernel@vger.kernel.org,
	dianders@chromium.org, linux-rockchip@lists.infradead.org,
	romain.perier@gmail.com, linux-arm-kernel@lists.infradead.org,
	Heiko Stuebner <heiko@sntech.de>
Subject: [PATCH v3 7/8] clk: rockchip: fix usbphy-related clocks
Date: Thu, 19 Nov 2015 22:22:28 +0100	[thread overview]
Message-ID: <1447968149-10979-8-git-send-email-heiko@sntech.de> (raw)
In-Reply-To: <1447968149-10979-1-git-send-email-heiko@sntech.de>

The otgphy clocks really only drive the phy blocks. These in turn
contain plls that then generate the 480m clocks the clock controller
uses to supply some other clocks like uart0, gpu or the video-codec.

So fix this structure to actually respect that hirarchy and removed
that usb480m fixed-rate clock working as a placeholder till now, as
this wouldn't even work if the supplying phy gets turned off while
its pll-output gets used elsewhere.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 arch/arm/boot/dts/rk3288-veyron.dtsi |  2 +-
 drivers/clk/rockchip/clk-rk3188.c    | 11 +++--------
 drivers/clk/rockchip/clk-rk3288.c    | 16 +++++-----------
 3 files changed, 9 insertions(+), 20 deletions(-)

diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 5e61f07..0a43e21 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -416,7 +416,7 @@
 	status = "okay";
 
 	assigned-clocks = <&cru SCLK_USBPHY480M_SRC>;
-	assigned-clock-parents = <&cru SCLK_OTGPHY0>;
+	assigned-clock-parents = <&usbphy0>;
 	dr_mode = "host";
 };
 
diff --git a/drivers/clk/rockchip/clk-rk3188.c b/drivers/clk/rockchip/clk-rk3188.c
index abb4760..7836a97 100644
--- a/drivers/clk/rockchip/clk-rk3188.c
+++ b/drivers/clk/rockchip/clk-rk3188.c
@@ -319,9 +319,9 @@ static struct rockchip_clk_branch common_clk_branches[] __initdata = {
 	 * the 480m are generated inside the usb block from these clocks,
 	 * but they are also a source for the hsicphy clock.
 	 */
-	GATE(SCLK_OTGPHY0, "sclk_otgphy0", "usb480m", CLK_IGNORE_UNUSED,
+	GATE(SCLK_OTGPHY0, "sclk_otgphy0", "xin24m", CLK_IGNORE_UNUSED,
 			RK2928_CLKGATE_CON(1), 5, GFLAGS),
-	GATE(SCLK_OTGPHY1, "sclk_otgphy1", "usb480m", CLK_IGNORE_UNUSED,
+	GATE(SCLK_OTGPHY1, "sclk_otgphy1", "xin24m", CLK_IGNORE_UNUSED,
 			RK2928_CLKGATE_CON(1), 6, GFLAGS),
 
 	COMPOSITE(0, "mac_src", mux_mac_p, 0,
@@ -635,7 +635,7 @@ static struct clk_div_table div_rk3188_aclk_core_t[] = {
 	{ /* sentinel */ },
 };
 
-PNAME(mux_hsicphy_p)		= { "sclk_otgphy0", "sclk_otgphy1",
+PNAME(mux_hsicphy_p)		= { "sclk_otgphy0_480m", "sclk_otgphy1_480m",
 				    "gpll", "cpll" };
 
 static struct rockchip_clk_branch rk3188_clk_branches[] __initdata = {
@@ -739,11 +739,6 @@ static void __init rk3188_common_clk_init(struct device_node *np)
 		pr_warn("%s: could not register clock xin12m: %ld\n",
 			__func__, PTR_ERR(clk));
 
-	clk = clk_register_fixed_factor(NULL, "usb480m", "xin24m", 0, 20, 1);
-	if (IS_ERR(clk))
-		pr_warn("%s: could not register clock usb480m: %ld\n",
-			__func__, PTR_ERR(clk));
-
 	rockchip_clk_register_branches(common_clk_branches,
 				  ARRAY_SIZE(common_clk_branches));
 
diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
index 9040878..7c8a3e9 100644
--- a/drivers/clk/rockchip/clk-rk3288.c
+++ b/drivers/clk/rockchip/clk-rk3288.c
@@ -195,8 +195,8 @@ PNAME(mux_hsadcout_p)	= { "hsadc_src", "ext_hsadc" };
 PNAME(mux_edp_24m_p)	= { "ext_edp_24m", "xin24m" };
 PNAME(mux_tspout_p)	= { "cpll", "gpll", "npll", "xin27m" };
 
-PNAME(mux_usbphy480m_p)		= { "sclk_otgphy1", "sclk_otgphy2",
-				    "sclk_otgphy0" };
+PNAME(mux_usbphy480m_p)		= { "sclk_otgphy1_480m", "sclk_otgphy2_480m",
+				    "sclk_otgphy0_480m" };
 PNAME(mux_hsicphy480m_p)	= { "cpll", "gpll", "usbphy480m_src" };
 PNAME(mux_hsicphy12m_p)		= { "hsicphy12m_xin12m", "hsicphy12m_usbphy" };
 
@@ -506,11 +506,11 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
 			RK3288_CLKSEL_CON(35), 6, 2, MFLAGS, 0, 5, DFLAGS,
 			RK3288_CLKGATE_CON(4), 10, GFLAGS),
 
-	GATE(SCLK_OTGPHY0, "sclk_otgphy0", "usb480m", CLK_IGNORE_UNUSED,
+	GATE(SCLK_OTGPHY0, "sclk_otgphy0", "xin24m", CLK_IGNORE_UNUSED,
 			RK3288_CLKGATE_CON(13), 4, GFLAGS),
-	GATE(SCLK_OTGPHY1, "sclk_otgphy1", "usb480m", CLK_IGNORE_UNUSED,
+	GATE(SCLK_OTGPHY1, "sclk_otgphy1", "xin24m", CLK_IGNORE_UNUSED,
 			RK3288_CLKGATE_CON(13), 5, GFLAGS),
-	GATE(SCLK_OTGPHY2, "sclk_otgphy2", "usb480m", CLK_IGNORE_UNUSED,
+	GATE(SCLK_OTGPHY2, "sclk_otgphy2", "xin24m", CLK_IGNORE_UNUSED,
 			RK3288_CLKGATE_CON(13), 6, GFLAGS),
 	GATE(SCLK_OTG_ADP, "sclk_otg_adp", "xin32k", CLK_IGNORE_UNUSED,
 			RK3288_CLKGATE_CON(13), 7, GFLAGS),
@@ -874,12 +874,6 @@ static void __init rk3288_clk_init(struct device_node *np)
 		pr_warn("%s: could not register clock xin12m: %ld\n",
 			__func__, PTR_ERR(clk));
 
-
-	clk = clk_register_fixed_factor(NULL, "usb480m", "xin24m", 0, 20, 1);
-	if (IS_ERR(clk))
-		pr_warn("%s: could not register clock usb480m: %ld\n",
-			__func__, PTR_ERR(clk));
-
 	clk = clk_register_fixed_factor(NULL, "hclk_vcodec_pre",
 					"hclk_vcodec_pre_v", 0, 1, 4);
 	if (IS_ERR(clk))
-- 
2.6.2

WARNING: multiple messages have this Message-ID (diff)
From: heiko@sntech.de (Heiko Stuebner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 7/8] clk: rockchip: fix usbphy-related clocks
Date: Thu, 19 Nov 2015 22:22:28 +0100	[thread overview]
Message-ID: <1447968149-10979-8-git-send-email-heiko@sntech.de> (raw)
In-Reply-To: <1447968149-10979-1-git-send-email-heiko@sntech.de>

The otgphy clocks really only drive the phy blocks. These in turn
contain plls that then generate the 480m clocks the clock controller
uses to supply some other clocks like uart0, gpu or the video-codec.

So fix this structure to actually respect that hirarchy and removed
that usb480m fixed-rate clock working as a placeholder till now, as
this wouldn't even work if the supplying phy gets turned off while
its pll-output gets used elsewhere.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 arch/arm/boot/dts/rk3288-veyron.dtsi |  2 +-
 drivers/clk/rockchip/clk-rk3188.c    | 11 +++--------
 drivers/clk/rockchip/clk-rk3288.c    | 16 +++++-----------
 3 files changed, 9 insertions(+), 20 deletions(-)

diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 5e61f07..0a43e21 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -416,7 +416,7 @@
 	status = "okay";
 
 	assigned-clocks = <&cru SCLK_USBPHY480M_SRC>;
-	assigned-clock-parents = <&cru SCLK_OTGPHY0>;
+	assigned-clock-parents = <&usbphy0>;
 	dr_mode = "host";
 };
 
diff --git a/drivers/clk/rockchip/clk-rk3188.c b/drivers/clk/rockchip/clk-rk3188.c
index abb4760..7836a97 100644
--- a/drivers/clk/rockchip/clk-rk3188.c
+++ b/drivers/clk/rockchip/clk-rk3188.c
@@ -319,9 +319,9 @@ static struct rockchip_clk_branch common_clk_branches[] __initdata = {
 	 * the 480m are generated inside the usb block from these clocks,
 	 * but they are also a source for the hsicphy clock.
 	 */
-	GATE(SCLK_OTGPHY0, "sclk_otgphy0", "usb480m", CLK_IGNORE_UNUSED,
+	GATE(SCLK_OTGPHY0, "sclk_otgphy0", "xin24m", CLK_IGNORE_UNUSED,
 			RK2928_CLKGATE_CON(1), 5, GFLAGS),
-	GATE(SCLK_OTGPHY1, "sclk_otgphy1", "usb480m", CLK_IGNORE_UNUSED,
+	GATE(SCLK_OTGPHY1, "sclk_otgphy1", "xin24m", CLK_IGNORE_UNUSED,
 			RK2928_CLKGATE_CON(1), 6, GFLAGS),
 
 	COMPOSITE(0, "mac_src", mux_mac_p, 0,
@@ -635,7 +635,7 @@ static struct clk_div_table div_rk3188_aclk_core_t[] = {
 	{ /* sentinel */ },
 };
 
-PNAME(mux_hsicphy_p)		= { "sclk_otgphy0", "sclk_otgphy1",
+PNAME(mux_hsicphy_p)		= { "sclk_otgphy0_480m", "sclk_otgphy1_480m",
 				    "gpll", "cpll" };
 
 static struct rockchip_clk_branch rk3188_clk_branches[] __initdata = {
@@ -739,11 +739,6 @@ static void __init rk3188_common_clk_init(struct device_node *np)
 		pr_warn("%s: could not register clock xin12m: %ld\n",
 			__func__, PTR_ERR(clk));
 
-	clk = clk_register_fixed_factor(NULL, "usb480m", "xin24m", 0, 20, 1);
-	if (IS_ERR(clk))
-		pr_warn("%s: could not register clock usb480m: %ld\n",
-			__func__, PTR_ERR(clk));
-
 	rockchip_clk_register_branches(common_clk_branches,
 				  ARRAY_SIZE(common_clk_branches));
 
diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
index 9040878..7c8a3e9 100644
--- a/drivers/clk/rockchip/clk-rk3288.c
+++ b/drivers/clk/rockchip/clk-rk3288.c
@@ -195,8 +195,8 @@ PNAME(mux_hsadcout_p)	= { "hsadc_src", "ext_hsadc" };
 PNAME(mux_edp_24m_p)	= { "ext_edp_24m", "xin24m" };
 PNAME(mux_tspout_p)	= { "cpll", "gpll", "npll", "xin27m" };
 
-PNAME(mux_usbphy480m_p)		= { "sclk_otgphy1", "sclk_otgphy2",
-				    "sclk_otgphy0" };
+PNAME(mux_usbphy480m_p)		= { "sclk_otgphy1_480m", "sclk_otgphy2_480m",
+				    "sclk_otgphy0_480m" };
 PNAME(mux_hsicphy480m_p)	= { "cpll", "gpll", "usbphy480m_src" };
 PNAME(mux_hsicphy12m_p)		= { "hsicphy12m_xin12m", "hsicphy12m_usbphy" };
 
@@ -506,11 +506,11 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
 			RK3288_CLKSEL_CON(35), 6, 2, MFLAGS, 0, 5, DFLAGS,
 			RK3288_CLKGATE_CON(4), 10, GFLAGS),
 
-	GATE(SCLK_OTGPHY0, "sclk_otgphy0", "usb480m", CLK_IGNORE_UNUSED,
+	GATE(SCLK_OTGPHY0, "sclk_otgphy0", "xin24m", CLK_IGNORE_UNUSED,
 			RK3288_CLKGATE_CON(13), 4, GFLAGS),
-	GATE(SCLK_OTGPHY1, "sclk_otgphy1", "usb480m", CLK_IGNORE_UNUSED,
+	GATE(SCLK_OTGPHY1, "sclk_otgphy1", "xin24m", CLK_IGNORE_UNUSED,
 			RK3288_CLKGATE_CON(13), 5, GFLAGS),
-	GATE(SCLK_OTGPHY2, "sclk_otgphy2", "usb480m", CLK_IGNORE_UNUSED,
+	GATE(SCLK_OTGPHY2, "sclk_otgphy2", "xin24m", CLK_IGNORE_UNUSED,
 			RK3288_CLKGATE_CON(13), 6, GFLAGS),
 	GATE(SCLK_OTG_ADP, "sclk_otg_adp", "xin32k", CLK_IGNORE_UNUSED,
 			RK3288_CLKGATE_CON(13), 7, GFLAGS),
@@ -874,12 +874,6 @@ static void __init rk3288_clk_init(struct device_node *np)
 		pr_warn("%s: could not register clock xin12m: %ld\n",
 			__func__, PTR_ERR(clk));
 
-
-	clk = clk_register_fixed_factor(NULL, "usb480m", "xin24m", 0, 20, 1);
-	if (IS_ERR(clk))
-		pr_warn("%s: could not register clock usb480m: %ld\n",
-			__func__, PTR_ERR(clk));
-
 	clk = clk_register_fixed_factor(NULL, "hclk_vcodec_pre",
 					"hclk_vcodec_pre_v", 0, 1, 4);
 	if (IS_ERR(clk))
-- 
2.6.2

  parent reply	other threads:[~2015-11-19 21:24 UTC|newest]

Thread overview: 67+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-19 21:22 [PATCH v3 0/8] phy: rockchip-usb: correct pll handling and usb-uart Heiko Stuebner
2015-11-19 21:22 ` Heiko Stuebner
2015-11-19 21:22 ` Heiko Stuebner
2015-11-19 21:22 ` [PATCH v3 1/8] phy: rockchip-usb: fix clock get-put mismatch Heiko Stuebner
2015-11-19 21:22   ` Heiko Stuebner
2015-11-19 21:22   ` Heiko Stuebner
2015-11-19 21:22 ` [PATCH v3 2/8] phy: rockchip-usb: introduce a common data-struct for the device Heiko Stuebner
2015-11-19 21:22   ` Heiko Stuebner
2015-11-20  0:38   ` Doug Anderson
2015-11-20  0:38     ` Doug Anderson
2015-11-20  0:38     ` Doug Anderson
2015-11-19 21:22 ` [PATCH v3 3/8] phy: rockchip-usb: move per-phy init into a separate function Heiko Stuebner
2015-11-19 21:22   ` Heiko Stuebner
2015-11-19 21:22   ` Heiko Stuebner
2015-11-19 21:22 ` [PATCH v3 4/8] phy: rockchip-usb: add compatible values for rk3066a and rk3188 Heiko Stuebner
2015-11-19 21:22   ` Heiko Stuebner
2015-11-19 21:22   ` Heiko Stuebner
2015-11-20  0:32   ` Doug Anderson
2015-11-20  0:32     ` Doug Anderson
2015-11-20  0:32     ` Doug Anderson
2015-11-22 19:49     ` Heiko Stuebner
2015-11-22 19:49       ` Heiko Stuebner
2015-11-22 19:49       ` Heiko Stuebner
2015-11-25 17:04       ` Doug Anderson
2015-11-25 17:04         ` Doug Anderson
2015-11-25 17:04         ` Doug Anderson
2015-11-25 18:24         ` Heiko Stübner
2015-11-25 18:24           ` Heiko Stübner
2015-11-25 18:24           ` Heiko Stübner
2015-11-25 18:35           ` Doug Anderson
2015-11-25 18:35             ` Doug Anderson
2015-11-25 18:35             ` Doug Anderson
2015-11-19 21:22 ` [PATCH v3 5/8] phy: rockchip-usb: expose the phy-internal PLLs Heiko Stuebner
2015-11-19 21:22   ` Heiko Stuebner
2015-11-19 21:22   ` Heiko Stuebner
2015-12-15 10:53   ` Kishon Vijay Abraham I
2015-12-15 10:53     ` Kishon Vijay Abraham I
2015-12-15 10:53     ` Kishon Vijay Abraham I
2015-12-21 20:00     ` Michael Turquette
2015-12-21 20:00       ` Michael Turquette
2015-12-21 20:00       ` Michael Turquette
2015-11-19 21:22 ` [PATCH v3 6/8] ARM: dts: rockchip: add clock-cells for usb phy nodes Heiko Stuebner
2015-11-19 21:22   ` Heiko Stuebner
2015-11-19 21:22   ` Heiko Stuebner
2016-01-25 14:06   ` Heiko Stübner
2016-01-25 14:06     ` Heiko Stübner
2015-11-19 21:22 ` Heiko Stuebner [this message]
2015-11-19 21:22   ` [PATCH v3 7/8] clk: rockchip: fix usbphy-related clocks Heiko Stuebner
2015-11-19 21:22   ` Heiko Stuebner
2015-12-15 10:52   ` Kishon Vijay Abraham I
2015-12-15 10:52     ` Kishon Vijay Abraham I
2015-12-15 10:52     ` Kishon Vijay Abraham I
2015-12-19 17:21     ` Heiko Stübner
2015-12-19 17:21       ` Heiko Stübner
2015-12-20  9:09       ` Kishon Vijay Abraham I
2015-12-20  9:09         ` Kishon Vijay Abraham I
2015-12-20  9:09         ` Kishon Vijay Abraham I
2016-01-25 14:04   ` Heiko Stübner
2016-01-25 14:04     ` Heiko Stübner
2015-11-19 21:22 ` [PATCH v3 8/8] phy: rockchip-usb: add handler for usb-uart functionality Heiko Stuebner
2015-11-19 21:22   ` Heiko Stuebner
2015-11-19 21:22   ` Heiko Stuebner
2015-12-02 15:32 ` [PATCH v3 0/8] phy: rockchip-usb: correct pll handling and usb-uart Heiko Stübner
2015-12-02 15:32   ` Heiko Stübner
2015-12-03  6:05   ` Kishon Vijay Abraham I
2015-12-03  6:05     ` Kishon Vijay Abraham I
2015-12-03  6:05     ` Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1447968149-10979-8-git-send-email-heiko@sntech.de \
    --to=heiko@sntech.de \
    --cc=arnd@arndb.de \
    --cc=dianders@chromium.org \
    --cc=hl@rock-chips.com \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mturquette@baylibre.com \
    --cc=romain.perier@gmail.com \
    --cc=sboyd@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.