[PATCH 1/8] goldfish: refactor goldfish platform configs

[PATCH 1/8] goldfish: refactor goldfish platform configs

[Jin Qian]

From: Greg Hackmann <ghackmann@google.com>

On new virtual devices, the goldfish virtual bus can be replaced with
autoprobing infrastructure like Device Tree.  Refactor the goldfish
kernel configs to better accommodate this.

Move the goldfish platform into a menuconfig in the style of the chrome
platform, and separate the goldfish bus into its own config option.

Signed-off-by: Greg Hackmann <ghackmann@google.com>
(cherry picked from commit 711910868190ee3645c1c52701bdde844447783f)
Signed-off-by: Jin Qian <jinqian@android.com>
---
 drivers/platform/Kconfig           |  3 +--
 drivers/platform/goldfish/Kconfig  | 18 ++++++++++++++++++
 drivers/platform/goldfish/Makefile |  2 +-
 3 files changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/platform/Kconfig b/drivers/platform/Kconfig
index 0adccbf..c11db8b 100644
--- a/drivers/platform/Kconfig
+++ b/drivers/platform/Kconfig
@@ -4,8 +4,7 @@ endif
 if MIPS
 source "drivers/platform/mips/Kconfig"
 endif
-if GOLDFISH
+
 source "drivers/platform/goldfish/Kconfig"
-endif
 
 source "drivers/platform/chrome/Kconfig"
diff --git a/drivers/platform/goldfish/Kconfig b/drivers/platform/goldfish/Kconfig
index 635ef25..1ae3690 100644
--- a/drivers/platform/goldfish/Kconfig
+++ b/drivers/platform/goldfish/Kconfig
@@ -1,5 +1,23 @@
+menuconfig GOLDFISH
+	bool "Platform support for Goldfish virtual devices"
+	depends on X86_32 || X86_64 || ARM || ARM64
+	---help---
+	  Say Y here to get to see options for the Goldfish virtual platform.
+	  This option alone does not add any kernel code.
+
+	  Unless you are building for the Android Goldfish emulator say N here.
+
+if GOLDFISH
+
+config GOLDFISH_BUS
+	tristate "Goldfish platform bus"
+	---help---
+	  This is a virtual bus to host Goldfish Android Virtual Devices.
+
 config GOLDFISH_PIPE
 	tristate "Goldfish virtual device for QEMU pipes"
 	---help---
 	  This is a virtual device to drive the QEMU pipe interface used by
 	  the Goldfish Android Virtual Device.
+
+endif # GOLDFISH
diff --git a/drivers/platform/goldfish/Makefile b/drivers/platform/goldfish/Makefile
index a002239..d348712 100644
--- a/drivers/platform/goldfish/Makefile
+++ b/drivers/platform/goldfish/Makefile
@@ -1,5 +1,5 @@
 #
 # Makefile for Goldfish platform specific drivers
 #
-obj-$(CONFIG_GOLDFISH)	+=	pdev_bus.o
+obj-$(CONFIG_GOLDFISH_BUS)	+= pdev_bus.o
 obj-$(CONFIG_GOLDFISH_PIPE)	+= goldfish_pipe.o
-- 
2.6.0.rc2.230.g3dd15c0

[PATCH 2/8] android_pipe: don't be clever with #define offsets

[Jin Qian]

From: Alex Bennée <alex.bennee@linaro.org>

You just make it harder to figure out when commands are being used.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
(cherry picked from commit b765d478f67a2f6cb43c40a99114ea5ff1bcff97)
Signed-off-by: Jin Qian <jinqian@android.com>
---
 drivers/platform/goldfish/goldfish_pipe.c | 16 +++++-----------
 1 file changed, 5 insertions(+), 11 deletions(-)

diff --git a/drivers/platform/goldfish/goldfish_pipe.c b/drivers/platform/goldfish/goldfish_pipe.c
index e7a29e2..0fb3a34 100644
--- a/drivers/platform/goldfish/goldfish_pipe.c
+++ b/drivers/platform/goldfish/goldfish_pipe.c
@@ -90,12 +90,6 @@
 #define CMD_WRITE_BUFFER	4  /* send a user buffer to the emulator */
 #define CMD_WAKE_ON_WRITE	5  /* tell the emulator to wake us when writing
 				     is possible */
-
-/* The following commands are related to read operations, they must be
- * listed in the same order than the corresponding write ones, since we
- * will use (CMD_READ_BUFFER - CMD_WRITE_BUFFER) as a special offset
- * in goldfish_pipe_read_write() below.
- */
 #define CMD_READ_BUFFER        6  /* receive a user buffer from the emulator */
 #define CMD_WAKE_ON_READ       7  /* tell the emulator to wake us when reading
 				   * is possible */
@@ -272,8 +266,6 @@ static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer,
 	unsigned long irq_flags;
 	struct goldfish_pipe *pipe = filp->private_data;
 	struct goldfish_pipe_dev *dev = pipe->dev;
-	const int cmd_offset = is_write ? 0
-					: (CMD_READ_BUFFER - CMD_WRITE_BUFFER);
 	unsigned long address, address_end;
 	int ret = 0;
 
@@ -325,7 +317,8 @@ static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer,
 
 		/* Now, try to transfer the bytes in the current page */
 		spin_lock_irqsave(&dev->lock, irq_flags);
-		if (access_with_param(dev, CMD_WRITE_BUFFER + cmd_offset,
+		if (access_with_param(dev,
+				is_write ? CMD_WRITE_BUFFER : CMD_READ_BUFFER,
 				address, avail, pipe, &status)) {
 			gf_write_ptr(pipe, dev->base + PIPE_REG_CHANNEL,
 				     dev->base + PIPE_REG_CHANNEL_HIGH);
@@ -333,7 +326,7 @@ static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer,
 			gf_write_ptr((void *)address,
 				     dev->base + PIPE_REG_ADDRESS,
 				     dev->base + PIPE_REG_ADDRESS_HIGH);
-			writel(CMD_WRITE_BUFFER + cmd_offset,
+			writel(is_write ? CMD_WRITE_BUFFER : CMD_READ_BUFFER,
 					dev->base + PIPE_REG_COMMAND);
 			status = readl(dev->base + PIPE_REG_STATUS);
 		}
@@ -370,7 +363,8 @@ static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer,
 		set_bit(wakeBit, &pipe->flags);
 
 		/* Tell the emulator we're going to wait for a wake event */
-		goldfish_cmd(pipe, CMD_WAKE_ON_WRITE + cmd_offset);
+		goldfish_cmd(pipe,
+			is_write ? CMD_WAKE_ON_WRITE : CMD_WAKE_ON_READ);
 
 		/* Unlock the pipe, then wait for the wake signal */
 		mutex_unlock(&pipe->lock);
-- 
2.6.0.rc2.230.g3dd15c0

[PATCH 3/8] android_pipe: Pin pages to memory while copying and other cleanups

[Jin Qian]

From: Christoffer Dall <christoffer.dall@linaro.org>

The existing code had a troubling TODO statement concerning the fact
that it just did a check if the page that the QEMU backend was going to
read from / write to was there before the call to the QEMU backend and
then relying on the fact that the page stayed around, even in a
preemptible SMP kernel.  Obviously the page could go away or be
reassigned, and strange things may happen.

Further, writes were not tracked, so any use of COW or KSM-like
features would break completely.  Probably that was never used by adbd
(the only current active user of the pipe), but could prove much more
dangerous for the GPU passthrough mechanism.

Instead, use get_user_pages() as the comment suggested and cleanup the
error path and add the set_page_dirt() call on a successful read
operation.

Also clarify the count used to return from successful read/write calls
and use Linux style commentary in various places of the file.

Note: The "just ignore error and return whatever we read so far" error
handling is really quite horrific.  I cannot change it without a more
careful study of all user space ABIs reliance on this 'feature'.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit ca8dafc623c6956fad77df80540a1e31f5f8fe2b)
Signed-off-by: Jin Qian <jinqian@android.com>
---
 drivers/platform/goldfish/goldfish_pipe.c | 129 +++++++++++++++++-------------
 1 file changed, 72 insertions(+), 57 deletions(-)

diff --git a/drivers/platform/goldfish/goldfish_pipe.c b/drivers/platform/goldfish/goldfish_pipe.c
index 0fb3a34..20a9337 100644
--- a/drivers/platform/goldfish/goldfish_pipe.c
+++ b/drivers/platform/goldfish/goldfish_pipe.c
@@ -2,6 +2,7 @@
  * Copyright (C) 2011 Google, Inc.
  * Copyright (C) 2012 Intel, Inc.
  * Copyright (C) 2013 Intel, Inc.
+ * Copyright (C) 2014 Linaro Limited
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -57,6 +58,7 @@
 #include <linux/slab.h>
 #include <linux/io.h>
 #include <linux/goldfish.h>
+#include <linux/mm.h>
 
 /*
  * IMPORTANT: The following constants must match the ones used and defined
@@ -257,17 +259,14 @@ static int access_with_param(struct goldfish_pipe_dev *dev, const int cmd,
 	return 0;
 }
 
-/* This function is used for both reading from and writing to a given
- * pipe.
- */
 static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer,
-				    size_t bufflen, int is_write)
+				       size_t bufflen, int is_write)
 {
 	unsigned long irq_flags;
 	struct goldfish_pipe *pipe = filp->private_data;
 	struct goldfish_pipe_dev *dev = pipe->dev;
 	unsigned long address, address_end;
-	int ret = 0;
+	int count = 0, ret = -EINVAL;
 
 	/* If the emulator already closed the pipe, no need to go further */
 	if (test_bit(BIT_CLOSED_ON_HOST, &pipe->flags))
@@ -290,30 +289,23 @@ static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer,
 	address_end = address + bufflen;
 
 	while (address < address_end) {
-		unsigned long  page_end = (address & PAGE_MASK) + PAGE_SIZE;
-		unsigned long  next     = page_end < address_end ? page_end
-								 : address_end;
-		unsigned long  avail    = next - address;
+		unsigned long page_end = (address & PAGE_MASK) + PAGE_SIZE;
+		unsigned long next     = page_end < address_end ? page_end
+								: address_end;
+		unsigned long avail    = next - address;
 		int status, wakeBit;
-
-		/* Ensure that the corresponding page is properly mapped */
-		/* FIXME: this isn't safe or sufficient - use get_user_pages */
-		if (is_write) {
-			char c;
-			/* Ensure that the page is mapped and readable */
-			if (__get_user(c, (char __user *)address)) {
-				if (!ret)
-					ret = -EFAULT;
-				break;
-			}
-		} else {
-			/* Ensure that the page is mapped and writable */
-			if (__put_user(0, (char __user *)address)) {
-				if (!ret)
-					ret = -EFAULT;
-				break;
-			}
-		}
+		struct page *page;
+
+		/*
+		 * We grab the pages on a page-by-page basis in case user
+		 * space gives us a potentially huge buffer but the read only
+		 * returns a small amount, then there's no need to pin that
+		 * much memory to the process.
+		 */
+		ret = get_user_pages(current, current->mm, address, 1,
+				     !is_write, 0, &page, NULL);
+		if (ret < 0)
+			return ret;
 
 		/* Now, try to transfer the bytes in the current page */
 		spin_lock_irqsave(&dev->lock, irq_flags);
@@ -332,33 +324,48 @@ static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer,
 		}
 		spin_unlock_irqrestore(&dev->lock, irq_flags);
 
+		if (status > 0 && !is_write)
+			set_page_dirty(page);
+		put_page(page);
+
 		if (status > 0) { /* Correct transfer */
-			ret += status;
+			count += status;
 			address += status;
 			continue;
-		}
-
-		if (status == 0)  /* EOF */
+		} else if (status == 0) { /* EOF */
+			ret = 0;
 			break;
-
-		/* An error occured. If we already transfered stuff, just
-		* return with its count. We expect the next call to return
-		* an error code */
-		if (ret > 0)
+		} else if (status < 0 && count > 0) {
+			/*
+			 * An error occurred and we already transferred
+			 * something on one of the previous pages.
+			 * Just return what we already copied and log this
+			 * err.
+			 *
+			 * Note: This seems like an incorrect approach but
+			 * cannot change it until we check if any user space
+			 * ABI relies on this behavior.
+			 */
+			pr_info_ratelimited("android_pipe: backend returned error %d on %s\n",
+					status, is_write ? "write" : "read");
+			ret = 0;
 			break;
+		}
 
-		/* If the error is not PIPE_ERROR_AGAIN, or if we are not in
-		* non-blocking mode, just return the error code.
-		*/
+		/*
+		 * If the error is not PIPE_ERROR_AGAIN, or if we are not in
+		 * non-blocking mode, just return the error code.
+		 */
 		if (status != PIPE_ERROR_AGAIN ||
 			(filp->f_flags & O_NONBLOCK) != 0) {
 			ret = goldfish_pipe_error_convert(status);
 			break;
 		}
 
-		/* We will have to wait until more data/space is available.
-		* First, mark the pipe as waiting for a specific wake signal.
-		*/
+		/*
+		 * The backend blocked the read/write, wait until the backend
+		 * tells us it's ready to process more data.
+		 */
 		wakeBit = is_write ? BIT_WAKE_ON_WRITE : BIT_WAKE_ON_READ;
 		set_bit(wakeBit, &pipe->flags);
 
@@ -372,22 +379,29 @@ static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer,
 		while (test_bit(wakeBit, &pipe->flags)) {
 			if (wait_event_interruptible(
 					pipe->wake_queue,
-					!test_bit(wakeBit, &pipe->flags)))
-				return -ERESTARTSYS;
+					!test_bit(wakeBit, &pipe->flags))) {
+				ret = -ERESTARTSYS;
+				break;
+			}
 
-			if (test_bit(BIT_CLOSED_ON_HOST, &pipe->flags))
-				return -EIO;
+			if (test_bit(BIT_CLOSED_ON_HOST, &pipe->flags)) {
+				ret = -EIO;
+				break;
+			}
 		}
 
 		/* Try to re-acquire the lock */
-		if (mutex_lock_interruptible(&pipe->lock))
-			return -ERESTARTSYS;
-
-		/* Try the transfer again */
-		continue;
+		if (mutex_lock_interruptible(&pipe->lock)) {
+			ret = -ERESTARTSYS;
+			break;
+		}
 	}
 	mutex_unlock(&pipe->lock);
-	return ret;
+
+	if (ret < 0)
+		return ret;
+	else
+		return count;
 }
 
 static ssize_t goldfish_pipe_read(struct file *filp, char __user *buffer,
@@ -440,10 +454,11 @@ static irqreturn_t goldfish_pipe_interrupt(int irq, void *dev_id)
 	unsigned long irq_flags;
 	int count = 0;
 
-	/* We're going to read from the emulator a list of (channel,flags)
-	* pairs corresponding to the wake events that occured on each
-	* blocked pipe (i.e. channel).
-	*/
+	/*
+	 * We're going to read from the emulator a list of (channel,flags)
+	 * pairs corresponding to the wake events that occurred on each
+	 * blocked pipe (i.e. channel).
+	 */
 	spin_lock_irqsave(&dev->lock, irq_flags);
 	for (;;) {
 		/* First read the channel, 0 means the end of the list */
-- 
2.6.0.rc2.230.g3dd15c0

[PATCH 4/8] platform: goldfish: pipe: add devicetree bindings

[Jin Qian]

From: Greg Hackmann <ghackmann@google.com>

Signed-off-by: Greg Hackmann <ghackmann@google.com>
(cherry picked from commit 3c56d07eb796066530e93a40e74dea3bc59bf4cf)
Signed-off-by: Jin Qian <jinqian@android.com>
---
 drivers/platform/goldfish/goldfish_pipe.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/goldfish/goldfish_pipe.c b/drivers/platform/goldfish/goldfish_pipe.c
index 20a9337..86cc57f 100644
--- a/drivers/platform/goldfish/goldfish_pipe.c
+++ b/drivers/platform/goldfish/goldfish_pipe.c
@@ -624,11 +624,19 @@ static int goldfish_pipe_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id goldfish_pipe_of_match[] = {
+	{ .compatible = "generic,android-pipe", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, goldfish_pipe_of_match);
+
 static struct platform_driver goldfish_pipe = {
 	.probe = goldfish_pipe_probe,
 	.remove = goldfish_pipe_remove,
 	.driver = {
-		.name = "goldfish_pipe"
+		.name = "goldfish_pipe",
+		.owner = THIS_MODULE,
+		.of_match_table = goldfish_pipe_of_match,
 	}
 };
 
-- 
2.6.0.rc2.230.g3dd15c0

[PATCH 5/8] platform: goldfish: pipe: don't log when dropping PIPE_ERROR_AGAIN

[Jin Qian]

From: Greg Hackmann <ghackmann@google.com>

On PIPE_ERROR_AGAIN, just stopping in the middle of a transfer and
returning the number of bytes actually handled is the right behavior.

Other errors should be returned on the next read() or write() call.
Continue logging those until we confirm nothing actually relies on the
existing (wrong) behavior of dropping errors on the floor.

Signed-off-by: Greg Hackmann <ghackmann@google.com>
(cherry picked from commit 1bebc767c41766fc00787473e364db83d5fe6989)
Signed-off-by: Jin Qian <jinqian@android.com>
---
 drivers/platform/goldfish/goldfish_pipe.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/goldfish/goldfish_pipe.c b/drivers/platform/goldfish/goldfish_pipe.c
index 86cc57f..afc6f8d 100644
--- a/drivers/platform/goldfish/goldfish_pipe.c
+++ b/drivers/platform/goldfish/goldfish_pipe.c
@@ -346,7 +346,8 @@ static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer,
 			 * cannot change it until we check if any user space
 			 * ABI relies on this behavior.
 			 */
-			pr_info_ratelimited("android_pipe: backend returned error %d on %s\n",
+			if (status != PIPE_ERROR_AGAIN)
+				pr_info_ratelimited("goldfish_pipe: backend returned error %d on %s\n",
 					status, is_write ? "write" : "read");
 			ret = 0;
 			break;
-- 
2.6.0.rc2.230.g3dd15c0

[PATCH 6/8] [MIPS] Enable platform support for Goldfish virtual devices

[Jin Qian]

From: Miodrag Dinic <miodrag.dinic@imgtec.com>

Enable CONFIG_GOLDFISH for MIPS platforms.

Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
(cherry picked from commit 77559b0f7df9c7b81cb2500f4fe07b4dbbaf239a)
Signed-off-by: Jin Qian <jinqian@android.com>
---
 drivers/platform/goldfish/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/platform/goldfish/Kconfig b/drivers/platform/goldfish/Kconfig
index 1ae3690..f4f00f7 100644
--- a/drivers/platform/goldfish/Kconfig
+++ b/drivers/platform/goldfish/Kconfig
@@ -1,6 +1,6 @@
 menuconfig GOLDFISH
 	bool "Platform support for Goldfish virtual devices"
-	depends on X86_32 || X86_64 || ARM || ARM64
+	depends on X86_32 || X86_64 || ARM || ARM64 || MIPS
 	---help---
 	  Say Y here to get to see options for the Goldfish virtual platform.
 	  This option alone does not add any kernel code.
-- 
2.6.0.rc2.230.g3dd15c0

[PATCH 7/8] goldfish_pipe: Pass physical addresses to the device if supported

[Jin Qian]

From: Yu Ning <yu.ning@intel.com>

For reading and writing guest user space buffers, currently the kernel
sends the guest virtual address of the buffer to the pipe device. This
virtual address has to be first converted to a guest physical address.
Doing this translation on the QEMU side is inefficient and requires
additional handling when KVM is enabled, whose implementation would
either incur intrusive changes to QEMU's KVM support code or suffer
from poor performance, see commit 08c7228c50f8 ("x86-kvm: only sync
SREGS when doing address translation") of $AOSP/external/qemu for
details, and thus should be avoided if possible.

There is a TODO comment in hw/misc/android_pipe.c in the new Android
emulator source tree ($AOSP/external/qemu-android) which requests that
the translation be done on the kernel side and that physical addresses
be passed to the device instead of virtual ones. Once the QEMU-side
implementation is done, the kernel will need to support both the new
paddr-based pipe device and the old vaddr-based one (which will
continue to be used by the classic emulator). This patch achieves that
by leveraging the device version register available in the new device.

See https://android-review.googlesource.com/128280 for the QEMU-side
patch.

In addition, use the mmap semaphore (in read mode) to safeguard the
call to get_user_pages().

Signed-off-by: Yu Ning <yu.ning@intel.com>
(cherry picked from commit acf92a5c274dfbdfff877ed86bebc4b2b92fe1d9)
Signed-off-by: Jin Qian <jinqian@android.com>
---
 drivers/platform/goldfish/goldfish_pipe.c | 29 +++++++++++++++++++++++++++--
 1 file changed, 27 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/goldfish/goldfish_pipe.c b/drivers/platform/goldfish/goldfish_pipe.c
index afc6f8d..a473aca 100644
--- a/drivers/platform/goldfish/goldfish_pipe.c
+++ b/drivers/platform/goldfish/goldfish_pipe.c
@@ -77,6 +77,7 @@
 #define PIPE_REG_PARAMS_ADDR_LOW	0x18  /* read/write: batch data address */
 #define PIPE_REG_PARAMS_ADDR_HIGH	0x1c  /* read/write: batch data address */
 #define PIPE_REG_ACCESS_PARAMS		0x20  /* write: batch access */
+#define PIPE_REG_VERSION		0x24  /* read: device version */
 
 /* list of commands for PIPE_REG_COMMAND */
 #define CMD_OPEN			1  /* open new channel */
@@ -126,6 +127,7 @@ struct goldfish_pipe_dev {
 	unsigned char __iomem *base;
 	struct access_params *aps;
 	int irq;
+	u32 version;
 };
 
 static struct goldfish_pipe_dev   pipe_dev[1];
@@ -296,26 +298,43 @@ static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer,
 		int status, wakeBit;
 		struct page *page;
 
+		/* Either vaddr or paddr depending on the device version */
+		unsigned long xaddr;
+
 		/*
 		 * We grab the pages on a page-by-page basis in case user
 		 * space gives us a potentially huge buffer but the read only
 		 * returns a small amount, then there's no need to pin that
 		 * much memory to the process.
 		 */
+		down_read(&current->mm->mmap_sem);
 		ret = get_user_pages(current, current->mm, address, 1,
 				     !is_write, 0, &page, NULL);
+		up_read(&current->mm->mmap_sem);
 		if (ret < 0)
 			return ret;
 
+		if (dev->version) {
+			/* Device version 1 or newer (qemu-android) expects the
+			 * physical address.
+			 */
+			xaddr = page_to_phys(page) | (address & ~PAGE_MASK);
+		} else {
+			/* Device version 0 (classic emulator) expects the
+			 * virtual address.
+			 */
+			xaddr = address;
+		}
+
 		/* Now, try to transfer the bytes in the current page */
 		spin_lock_irqsave(&dev->lock, irq_flags);
 		if (access_with_param(dev,
 				is_write ? CMD_WRITE_BUFFER : CMD_READ_BUFFER,
-				address, avail, pipe, &status)) {
+				xaddr, avail, pipe, &status)) {
 			gf_write_ptr(pipe, dev->base + PIPE_REG_CHANNEL,
 				     dev->base + PIPE_REG_CHANNEL_HIGH);
 			writel(avail, dev->base + PIPE_REG_SIZE);
-			gf_write_ptr((void *)address,
+			gf_write_ptr((void *)xaddr,
 				     dev->base + PIPE_REG_ADDRESS,
 				     dev->base + PIPE_REG_ADDRESS_HIGH);
 			writel(is_write ? CMD_WRITE_BUFFER : CMD_READ_BUFFER,
@@ -610,6 +629,12 @@ static int goldfish_pipe_probe(struct platform_device *pdev)
 		goto error;
 	}
 	setup_access_params_addr(pdev, dev);
+
+	/* Although the pipe device in the classic Android emulator does not
+	 * recognize the 'version' register, it won't treat this as an error
+	 * either and will simply return 0, which is fine.
+	 */
+	dev->version = readl(dev->base + PIPE_REG_VERSION);
 	return 0;
 
 error:
-- 
2.6.0.rc2.230.g3dd15c0

[PATCH 8/8] goldfish: Enable ACPI-based enumeration for android pipe

[Jin Qian]

From: Jason Hu <jia-cheng.hu@intel.com>

Add ACPI binding to the android pipe driver

Signed-off-by: Jason Hu <jia-cheng.hu@intel.com>
(cherry picked from commit 044d26f395f8c45ada0ead21285ffe4628f05046)
Signed-off-by: Jin Qian <jinqian@android.com>
---
 drivers/platform/goldfish/goldfish_pipe.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/platform/goldfish/goldfish_pipe.c b/drivers/platform/goldfish/goldfish_pipe.c
index a473aca..55278af 100644
--- a/drivers/platform/goldfish/goldfish_pipe.c
+++ b/drivers/platform/goldfish/goldfish_pipe.c
@@ -59,6 +59,7 @@
 #include <linux/io.h>
 #include <linux/goldfish.h>
 #include <linux/mm.h>
+#include <linux/acpi.h>
 
 /*
  * IMPORTANT: The following constants must match the ones used and defined
@@ -650,6 +651,12 @@ static int goldfish_pipe_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct acpi_device_id goldfish_pipe_acpi_match[] = {
+	{ "GFSH0003", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, goldfish_pipe_acpi_match);
+
 static const struct of_device_id goldfish_pipe_of_match[] = {
 	{ .compatible = "generic,android-pipe", },
 	{},
@@ -663,6 +670,7 @@ static struct platform_driver goldfish_pipe = {
 		.name = "goldfish_pipe",
 		.owner = THIS_MODULE,
 		.of_match_table = goldfish_pipe_of_match,
+		.acpi_match_table = ACPI_PTR(goldfish_pipe_acpi_match),
 	}
 };
 
-- 
2.6.0.rc2.230.g3dd15c0

Re: [PATCH 4/8] platform: goldfish: pipe: add devicetree bindings

[Christoffer Dall]

On Tue, Nov 24, 2015 at 05:10:08PM -0800, Jin Qian wrote:
> From: Greg Hackmann <ghackmann@google.com>
> 
> Signed-off-by: Greg Hackmann <ghackmann@google.com>
> (cherry picked from commit 3c56d07eb796066530e93a40e74dea3bc59bf4cf)
> Signed-off-by: Jin Qian <jinqian@android.com>
> ---
>  drivers/platform/goldfish/goldfish_pipe.c | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/platform/goldfish/goldfish_pipe.c b/drivers/platform/goldfish/goldfish_pipe.c
> index 20a9337..86cc57f 100644
> --- a/drivers/platform/goldfish/goldfish_pipe.c
> +++ b/drivers/platform/goldfish/goldfish_pipe.c
> @@ -624,11 +624,19 @@ static int goldfish_pipe_remove(struct platform_device *pdev)
>  	return 0;
>  }
>  
> +static const struct of_device_id goldfish_pipe_of_match[] = {
> +	{ .compatible = "generic,android-pipe", },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, goldfish_pipe_of_match);
> +
>  static struct platform_driver goldfish_pipe = {
>  	.probe = goldfish_pipe_probe,
>  	.remove = goldfish_pipe_remove,
>  	.driver = {
> -		.name = "goldfish_pipe"
> +		.name = "goldfish_pipe",
> +		.owner = THIS_MODULE,
> +		.of_match_table = goldfish_pipe_of_match,
>  	}
>  };
>  
I think this needs something documented in
Documentation/devicetree/bindings as well.

-Christoffer

Re: [PATCH 1/8] goldfish: refactor goldfish platform configs

[Alex Bennée]

Jin Qian <jinqian@android.com> writes:

> From: Greg Hackmann <ghackmann@google.com>
>
> On new virtual devices, the goldfish virtual bus can be replaced with
> autoprobing infrastructure like Device Tree.  Refactor the goldfish
> kernel configs to better accommodate this.

Should there be a header for this series? Does Google want to upstream
the android pipe into mainline while we are still examining VirtIO
alternatives?

>
> Move the goldfish platform into a menuconfig in the style of the chrome
> platform, and separate the goldfish bus into its own config option.
>
> Signed-off-by: Greg Hackmann <ghackmann@google.com>
> (cherry picked from commit 711910868190ee3645c1c52701bdde844447783f)
> Signed-off-by: Jin Qian <jinqian@android.com>
> ---
>  drivers/platform/Kconfig           |  3 +--
>  drivers/platform/goldfish/Kconfig  | 18 ++++++++++++++++++
>  drivers/platform/goldfish/Makefile |  2 +-
>  3 files changed, 20 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/platform/Kconfig b/drivers/platform/Kconfig
> index 0adccbf..c11db8b 100644
> --- a/drivers/platform/Kconfig
> +++ b/drivers/platform/Kconfig
> @@ -4,8 +4,7 @@ endif
>  if MIPS
>  source "drivers/platform/mips/Kconfig"
>  endif
> -if GOLDFISH
> +
>  source "drivers/platform/goldfish/Kconfig"
> -endif
>
>  source "drivers/platform/chrome/Kconfig"
> diff --git a/drivers/platform/goldfish/Kconfig b/drivers/platform/goldfish/Kconfig
> index 635ef25..1ae3690 100644
> --- a/drivers/platform/goldfish/Kconfig
> +++ b/drivers/platform/goldfish/Kconfig
> @@ -1,5 +1,23 @@
> +menuconfig GOLDFISH
> +	bool "Platform support for Goldfish virtual devices"
> +	depends on X86_32 || X86_64 || ARM || ARM64
> +	---help---
> +	  Say Y here to get to see options for the Goldfish virtual platform.
> +	  This option alone does not add any kernel code.
> +
> +	  Unless you are building for the Android Goldfish emulator say N here.
> +
> +if GOLDFISH
> +
> +config GOLDFISH_BUS
> +	tristate "Goldfish platform bus"
> +	---help---
> +	  This is a virtual bus to host Goldfish Android Virtual Devices.
> +
>  config GOLDFISH_PIPE
>  	tristate "Goldfish virtual device for QEMU pipes"
>  	---help---
>  	  This is a virtual device to drive the QEMU pipe interface used by
>  	  the Goldfish Android Virtual Device.
> +
> +endif # GOLDFISH
> diff --git a/drivers/platform/goldfish/Makefile b/drivers/platform/goldfish/Makefile
> index a002239..d348712 100644
> --- a/drivers/platform/goldfish/Makefile
> +++ b/drivers/platform/goldfish/Makefile
> @@ -1,5 +1,5 @@
>  #
>  # Makefile for Goldfish platform specific drivers
>  #
> -obj-$(CONFIG_GOLDFISH)	+=	pdev_bus.o
> +obj-$(CONFIG_GOLDFISH_BUS)	+= pdev_bus.o
>  obj-$(CONFIG_GOLDFISH_PIPE)	+= goldfish_pipe.o
> --
> 2.6.0.rc2.230.g3dd15c0


--
Alex Bennée

[PATCH 5/8] platform: goldfish: pipe: don't log when dropping PIPE_ERROR_AGAIN

[Alan]

From: Greg Hackmann <ghackmann@google.com>

On PIPE_ERROR_AGAIN, just stopping in the middle of a transfer and
returning the number of bytes actually handled is the right behavior.

Other errors should be returned on the next read() or write() call.
Continue logging those until we confirm nothing actually relies on the
existing (wrong) behavior of dropping errors on the floor.

Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Jin Qian <jinqian@android.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
---
 drivers/platform/goldfish/goldfish_pipe.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/goldfish/goldfish_pipe.c b/drivers/platform/goldfish/goldfish_pipe.c
index 0b187ff..7a56be9 100644
--- a/drivers/platform/goldfish/goldfish_pipe.c
+++ b/drivers/platform/goldfish/goldfish_pipe.c
@@ -346,7 +346,8 @@ static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer,
 			 * cannot change it until we check if any user space
 			 * ABI relies on this behavior.
 			 */
-			pr_info_ratelimited("android_pipe: backend returned error %d on %s\n",
+			if (status != PIPE_ERROR_AGAIN)
+				pr_info_ratelimited("goldfish_pipe: backend returned error %d on %s\n",
 					status, is_write ? "write" : "read");
 			ret = 0;
 			break;