* [PATCH 00/10] ARM: s3c64xx multiplatform
@ 2015-11-25 16:06 ` Arnd Bergmann
0 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-11-25 16:06 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, Kukjin Kim, Krzysztof Kozlowski, Mark Brown,
Vasily Khoruzhick, Charles Keepax, Tomasz Figa, Ben Dooks,
linux-samsung-soc, Arnd Bergmann
I've posted the series before and we got a few people to test it
the last time, though I think the touchscreen portion is still
untested.
I'd really like to get this merged for 4.5 and would put it into
a next/multiplatform branch unless there are any objections
or concerns.
Arnd Bergmann (10):
Input: s3c2410_ts: fix S3C_ADC dependency
ASoC: samsung/smartq: use dynamic registration
gpio: samsung: move gpio-samsung driver back to platform code
ARM: s3c64xx: prepare initcalls for multiplatform
ARM: s3c64xx: enable sparse IRQ support
iio: exynos-adc: add experimental touchscreen support
ARM: s3c64xx: use new adc/touchscreen driver
ARM: s3c64xx: use common debug-ll implementation
ARM: s3c64xx: multiplatform support
ARM: s3c64xx: allow building without board support
.../devicetree/bindings/arm/samsung/exynos-adc.txt | 3 +
arch/arm/Kconfig | 26 ---
arch/arm/Kconfig.debug | 19 +-
arch/arm/configs/multi_v7_defconfig | 3 +
arch/arm/configs/s3c6400_defconfig | 2 +
arch/arm/mach-s3c64xx/Kconfig | 31 ++-
arch/arm/mach-s3c64xx/Makefile | 24 ++-
arch/arm/mach-s3c64xx/common.c | 5 +-
arch/arm/mach-s3c64xx/cpuidle.c | 5 +-
arch/arm/mach-s3c64xx/dev-uart.c | 1 +
arch/arm/mach-s3c64xx/include/mach/debug-macro.S | 38 ----
arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h | 3 +
arch/arm/mach-s3c64xx/include/mach/irqs.h | 20 +-
arch/arm/mach-s3c64xx/include/mach/pm-core.h | 1 +
arch/arm/mach-s3c64xx/irq-pm.c | 2 +-
arch/arm/mach-s3c64xx/mach-anw6410.c | 3 +-
arch/arm/mach-s3c64xx/mach-crag6410-module.c | 6 +
arch/arm/mach-s3c64xx/mach-crag6410.c | 2 +
arch/arm/mach-s3c64xx/mach-hmt.c | 2 +
arch/arm/mach-s3c64xx/mach-mini6410.c | 5 +-
arch/arm/mach-s3c64xx/mach-ncp.c | 2 +
arch/arm/mach-s3c64xx/mach-real6410.c | 6 +-
arch/arm/mach-s3c64xx/mach-smartq.c | 16 +-
arch/arm/mach-s3c64xx/mach-smartq5.c | 2 +
arch/arm/mach-s3c64xx/mach-smartq7.c | 2 +
arch/arm/mach-s3c64xx/mach-smdk6400.c | 3 +-
arch/arm/mach-s3c64xx/mach-smdk6410.c | 6 +-
arch/arm/mach-s3c64xx/pl080.c | 4 +
arch/arm/mach-s3c64xx/pm.c | 4 +
arch/arm/mach-s3c64xx/s3c6400.c | 2 +-
arch/arm/mach-s3c64xx/s3c6410.c | 2 +-
arch/arm/plat-samsung/Kconfig | 5 +-
arch/arm/plat-samsung/Makefile | 5 +-
arch/arm/plat-samsung/devs.c | 22 +-
.../gpio => arch/arm/plat-samsung}/gpio-samsung.c | 12 +-
arch/arm/plat-samsung/init.c | 5 +
arch/arm/plat-samsung/pm.c | 4 -
drivers/gpio/Kconfig | 7 -
drivers/gpio/Makefile | 1 -
drivers/iio/adc/exynos_adc.c | 224 ++++++++++++++++++++-
drivers/input/touchscreen/Kconfig | 2 +-
include/linux/platform_data/touchscreen-s3c2410.h | 1 +
sound/soc/samsung/smartq_wm8987.c | 77 +++----
43 files changed, 410 insertions(+), 205 deletions(-)
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/debug-macro.S
rename {drivers/gpio => arch/arm/plat-samsung}/gpio-samsung.c (99%)
--
2.1.0.rc2
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH 00/10] ARM: s3c64xx multiplatform
@ 2015-11-25 16:06 ` Arnd Bergmann
0 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-11-25 16:06 UTC (permalink / raw)
To: linux-arm-kernel
I've posted the series before and we got a few people to test it
the last time, though I think the touchscreen portion is still
untested.
I'd really like to get this merged for 4.5 and would put it into
a next/multiplatform branch unless there are any objections
or concerns.
Arnd Bergmann (10):
Input: s3c2410_ts: fix S3C_ADC dependency
ASoC: samsung/smartq: use dynamic registration
gpio: samsung: move gpio-samsung driver back to platform code
ARM: s3c64xx: prepare initcalls for multiplatform
ARM: s3c64xx: enable sparse IRQ support
iio: exynos-adc: add experimental touchscreen support
ARM: s3c64xx: use new adc/touchscreen driver
ARM: s3c64xx: use common debug-ll implementation
ARM: s3c64xx: multiplatform support
ARM: s3c64xx: allow building without board support
.../devicetree/bindings/arm/samsung/exynos-adc.txt | 3 +
arch/arm/Kconfig | 26 ---
arch/arm/Kconfig.debug | 19 +-
arch/arm/configs/multi_v7_defconfig | 3 +
arch/arm/configs/s3c6400_defconfig | 2 +
arch/arm/mach-s3c64xx/Kconfig | 31 ++-
arch/arm/mach-s3c64xx/Makefile | 24 ++-
arch/arm/mach-s3c64xx/common.c | 5 +-
arch/arm/mach-s3c64xx/cpuidle.c | 5 +-
arch/arm/mach-s3c64xx/dev-uart.c | 1 +
arch/arm/mach-s3c64xx/include/mach/debug-macro.S | 38 ----
arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h | 3 +
arch/arm/mach-s3c64xx/include/mach/irqs.h | 20 +-
arch/arm/mach-s3c64xx/include/mach/pm-core.h | 1 +
arch/arm/mach-s3c64xx/irq-pm.c | 2 +-
arch/arm/mach-s3c64xx/mach-anw6410.c | 3 +-
arch/arm/mach-s3c64xx/mach-crag6410-module.c | 6 +
arch/arm/mach-s3c64xx/mach-crag6410.c | 2 +
arch/arm/mach-s3c64xx/mach-hmt.c | 2 +
arch/arm/mach-s3c64xx/mach-mini6410.c | 5 +-
arch/arm/mach-s3c64xx/mach-ncp.c | 2 +
arch/arm/mach-s3c64xx/mach-real6410.c | 6 +-
arch/arm/mach-s3c64xx/mach-smartq.c | 16 +-
arch/arm/mach-s3c64xx/mach-smartq5.c | 2 +
arch/arm/mach-s3c64xx/mach-smartq7.c | 2 +
arch/arm/mach-s3c64xx/mach-smdk6400.c | 3 +-
arch/arm/mach-s3c64xx/mach-smdk6410.c | 6 +-
arch/arm/mach-s3c64xx/pl080.c | 4 +
arch/arm/mach-s3c64xx/pm.c | 4 +
arch/arm/mach-s3c64xx/s3c6400.c | 2 +-
arch/arm/mach-s3c64xx/s3c6410.c | 2 +-
arch/arm/plat-samsung/Kconfig | 5 +-
arch/arm/plat-samsung/Makefile | 5 +-
arch/arm/plat-samsung/devs.c | 22 +-
.../gpio => arch/arm/plat-samsung}/gpio-samsung.c | 12 +-
arch/arm/plat-samsung/init.c | 5 +
arch/arm/plat-samsung/pm.c | 4 -
drivers/gpio/Kconfig | 7 -
drivers/gpio/Makefile | 1 -
drivers/iio/adc/exynos_adc.c | 224 ++++++++++++++++++++-
drivers/input/touchscreen/Kconfig | 2 +-
include/linux/platform_data/touchscreen-s3c2410.h | 1 +
sound/soc/samsung/smartq_wm8987.c | 77 +++----
43 files changed, 410 insertions(+), 205 deletions(-)
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/debug-macro.S
rename {drivers/gpio => arch/arm/plat-samsung}/gpio-samsung.c (99%)
--
2.1.0.rc2
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH 01/10] Input: s3c2410_ts: fix S3C_ADC dependency
2015-11-25 16:06 ` Arnd Bergmann
(?)
@ 2015-11-25 16:06 ` Arnd Bergmann
-1 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-11-25 16:06 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, Kukjin Kim, Krzysztof Kozlowski, Mark Brown,
Vasily Khoruzhick, Charles Keepax, Tomasz Figa, Ben Dooks,
linux-samsung-soc, Arnd Bergmann
S3C_ADC is only available on machines that don't do ARCH_MULTIPLATFORM,
so changing the 'select' into 'depends on' here helps us move to
ARCH_MULTIPLATFORM without introducing regressions.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/touchscreen/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index ae33da7ab51f..ae35edcd6a34 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -365,7 +365,7 @@ config TOUCHSCREEN_IPROC
config TOUCHSCREEN_S3C2410
tristate "Samsung S3C2410/generic touchscreen input driver"
depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
- select S3C_ADC
+ depends on S3C_ADC
help
Say Y here if you have the s3c2410 touchscreen.
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH 01/10] Input: s3c2410_ts: fix S3C_ADC dependency
@ 2015-11-25 16:06 ` Arnd Bergmann
0 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-11-25 16:06 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Krzysztof Kozlowski, linux-samsung-soc, Arnd Bergmann,
Mark Brown, linux-kernel, Tomasz Figa, Vasily Khoruzhick,
Kukjin Kim, Charles Keepax, Ben Dooks
S3C_ADC is only available on machines that don't do ARCH_MULTIPLATFORM,
so changing the 'select' into 'depends on' here helps us move to
ARCH_MULTIPLATFORM without introducing regressions.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/touchscreen/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index ae33da7ab51f..ae35edcd6a34 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -365,7 +365,7 @@ config TOUCHSCREEN_IPROC
config TOUCHSCREEN_S3C2410
tristate "Samsung S3C2410/generic touchscreen input driver"
depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
- select S3C_ADC
+ depends on S3C_ADC
help
Say Y here if you have the s3c2410 touchscreen.
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH 01/10] Input: s3c2410_ts: fix S3C_ADC dependency
@ 2015-11-25 16:06 ` Arnd Bergmann
0 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-11-25 16:06 UTC (permalink / raw)
To: linux-arm-kernel
S3C_ADC is only available on machines that don't do ARCH_MULTIPLATFORM,
so changing the 'select' into 'depends on' here helps us move to
ARCH_MULTIPLATFORM without introducing regressions.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/touchscreen/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index ae33da7ab51f..ae35edcd6a34 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -365,7 +365,7 @@ config TOUCHSCREEN_IPROC
config TOUCHSCREEN_S3C2410
tristate "Samsung S3C2410/generic touchscreen input driver"
depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
- select S3C_ADC
+ depends on S3C_ADC
help
Say Y here if you have the s3c2410 touchscreen.
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH 02/10] ASoC: samsung/smartq: use dynamic registration
2015-11-25 16:06 ` Arnd Bergmann
@ 2015-11-25 16:06 ` Arnd Bergmann
-1 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-11-25 16:06 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, Kukjin Kim, Krzysztof Kozlowski, Mark Brown,
Vasily Khoruzhick, Charles Keepax, Tomasz Figa, Ben Dooks,
linux-samsung-soc, Arnd Bergmann
As a prerequisite for moving s3c64xx into multiplatform configurations,
we need to change the smartq audio driver to stop using hardcoded
gpio numbers from the header file, and instead pass the gpio data
through platform_data.
In order to do that, we also move the code to use module_platform_driver
and register the platform device using platform_device_register_simple
and register the gpios through the gpiod API.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
---
arch/arm/mach-s3c64xx/mach-smartq.c | 13 +++++++
sound/soc/samsung/smartq_wm8987.c | 77 +++++++++++++------------------------
2 files changed, 40 insertions(+), 50 deletions(-)
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index acdfb5fac40f..96784e7f894a 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -12,6 +12,7 @@
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
@@ -383,6 +384,15 @@ void __init smartq_map_io(void)
smartq_lcd_mode_set();
}
+static struct gpiod_lookup_table smartq_audio_gpios = {
+ .dev_id = "smartq-audio",
+ .table = {
+ GPIO_LOOKUP("GPL", 12, "headphone detect", 0),
+ GPIO_LOOKUP("GPK", 12, "amplifiers shutdown", 0),
+ { },
+ },
+};
+
void __init smartq_machine_init(void)
{
s3c_i2c0_set_platdata(NULL);
@@ -402,4 +412,7 @@ void __init smartq_machine_init(void)
pwm_add_table(smartq_pwm_lookup, ARRAY_SIZE(smartq_pwm_lookup));
platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
+
+ gpiod_add_lookup_table(&smartq_audio_gpios);
+ platform_device_register_simple("smartq-audio", -1, NULL, 0);
}
diff --git a/sound/soc/samsung/smartq_wm8987.c b/sound/soc/samsung/smartq_wm8987.c
index a0fe37fbed9f..c6769b16eb19 100644
--- a/sound/soc/samsung/smartq_wm8987.c
+++ b/sound/soc/samsung/smartq_wm8987.c
@@ -13,15 +13,12 @@
*
*/
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <sound/soc.h>
#include <sound/jack.h>
-#include <mach/gpio-samsung.h>
-#include <asm/mach-types.h>
-
#include "i2s.h"
#include "../codecs/wm8750.h"
@@ -96,7 +93,7 @@ static struct snd_soc_jack_pin smartq_jack_pins[] = {
static struct snd_soc_jack_gpio smartq_jack_gpios[] = {
{
- .gpio = S3C64XX_GPL(12),
+ .gpio = -1,
.name = "headphone detect",
.report = SND_JACK_HEADPHONE,
.debounce_time = 200,
@@ -113,7 +110,9 @@ static int smartq_speaker_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k,
int event)
{
- gpio_set_value(S3C64XX_GPK(12), SND_SOC_DAPM_EVENT_OFF(event));
+ struct gpio_desc *gpio = snd_soc_card_get_drvdata(&snd_soc_smartq);
+
+ gpiod_set_value(gpio, SND_SOC_DAPM_EVENT_OFF(event));
return 0;
}
@@ -199,62 +198,40 @@ static struct snd_soc_card snd_soc_smartq = {
.num_controls = ARRAY_SIZE(wm8987_smartq_controls),
};
-static struct platform_device *smartq_snd_device;
-
-static int __init smartq_init(void)
+static int smartq_probe(struct platform_device *pdev)
{
+ struct gpio_desc *gpio;
int ret;
- if (!machine_is_smartq7() && !machine_is_smartq5()) {
- pr_info("Only SmartQ is supported by this ASoC driver\n");
- return -ENODEV;
- }
-
- smartq_snd_device = platform_device_alloc("soc-audio", -1);
- if (!smartq_snd_device)
- return -ENOMEM;
-
- platform_set_drvdata(smartq_snd_device, &snd_soc_smartq);
-
- ret = platform_device_add(smartq_snd_device);
- if (ret) {
- platform_device_put(smartq_snd_device);
- return ret;
- }
+ platform_set_drvdata(pdev, &snd_soc_smartq);
/* Initialise GPIOs used by amplifiers */
- ret = gpio_request(S3C64XX_GPK(12), "amplifiers shutdown");
- if (ret) {
- dev_err(&smartq_snd_device->dev, "Failed to register GPK12\n");
- goto err_unregister_device;
+ gpio = devm_gpiod_get(&pdev->dev, "amplifiers shutdown",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(gpio)) {
+ dev_err(&pdev->dev, "Failed to register GPK12\n");
+ ret = PTR_ERR(gpio);
+ goto out;
}
+ snd_soc_card_set_drvdata(&snd_soc_smartq, gpio);
- /* Disable amplifiers */
- ret = gpio_direction_output(S3C64XX_GPK(12), 1);
- if (ret) {
- dev_err(&smartq_snd_device->dev, "Failed to configure GPK12\n");
- goto err_free_gpio_amp_shut;
- }
-
- return 0;
-
-err_free_gpio_amp_shut:
- gpio_free(S3C64XX_GPK(12));
-err_unregister_device:
- platform_device_unregister(smartq_snd_device);
+ ret = devm_snd_soc_register_card(&pdev->dev, &snd_soc_smartq);
+ if (ret)
+ dev_err(&pdev->dev, "Failed to register card\n");
+out:
return ret;
}
-static void __exit smartq_exit(void)
-{
- gpio_free(S3C64XX_GPK(12));
-
- platform_device_unregister(smartq_snd_device);
-}
+static struct platform_driver smartq_driver = {
+ .driver = {
+ .name = "smartq-audio",
+ .owner = THIS_MODULE,
+ },
+ .probe = smartq_probe,
+};
-module_init(smartq_init);
-module_exit(smartq_exit);
+module_platform_driver(smartq_driver);
/* Module information */
MODULE_AUTHOR("Maurus Cuelenaere <mcuelenaere@gmail.com>");
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH 02/10] ASoC: samsung/smartq: use dynamic registration
@ 2015-11-25 16:06 ` Arnd Bergmann
0 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-11-25 16:06 UTC (permalink / raw)
To: linux-arm-kernel
As a prerequisite for moving s3c64xx into multiplatform configurations,
we need to change the smartq audio driver to stop using hardcoded
gpio numbers from the header file, and instead pass the gpio data
through platform_data.
In order to do that, we also move the code to use module_platform_driver
and register the platform device using platform_device_register_simple
and register the gpios through the gpiod API.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
---
arch/arm/mach-s3c64xx/mach-smartq.c | 13 +++++++
sound/soc/samsung/smartq_wm8987.c | 77 +++++++++++++------------------------
2 files changed, 40 insertions(+), 50 deletions(-)
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index acdfb5fac40f..96784e7f894a 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -12,6 +12,7 @@
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
@@ -383,6 +384,15 @@ void __init smartq_map_io(void)
smartq_lcd_mode_set();
}
+static struct gpiod_lookup_table smartq_audio_gpios = {
+ .dev_id = "smartq-audio",
+ .table = {
+ GPIO_LOOKUP("GPL", 12, "headphone detect", 0),
+ GPIO_LOOKUP("GPK", 12, "amplifiers shutdown", 0),
+ { },
+ },
+};
+
void __init smartq_machine_init(void)
{
s3c_i2c0_set_platdata(NULL);
@@ -402,4 +412,7 @@ void __init smartq_machine_init(void)
pwm_add_table(smartq_pwm_lookup, ARRAY_SIZE(smartq_pwm_lookup));
platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
+
+ gpiod_add_lookup_table(&smartq_audio_gpios);
+ platform_device_register_simple("smartq-audio", -1, NULL, 0);
}
diff --git a/sound/soc/samsung/smartq_wm8987.c b/sound/soc/samsung/smartq_wm8987.c
index a0fe37fbed9f..c6769b16eb19 100644
--- a/sound/soc/samsung/smartq_wm8987.c
+++ b/sound/soc/samsung/smartq_wm8987.c
@@ -13,15 +13,12 @@
*
*/
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <sound/soc.h>
#include <sound/jack.h>
-#include <mach/gpio-samsung.h>
-#include <asm/mach-types.h>
-
#include "i2s.h"
#include "../codecs/wm8750.h"
@@ -96,7 +93,7 @@ static struct snd_soc_jack_pin smartq_jack_pins[] = {
static struct snd_soc_jack_gpio smartq_jack_gpios[] = {
{
- .gpio = S3C64XX_GPL(12),
+ .gpio = -1,
.name = "headphone detect",
.report = SND_JACK_HEADPHONE,
.debounce_time = 200,
@@ -113,7 +110,9 @@ static int smartq_speaker_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k,
int event)
{
- gpio_set_value(S3C64XX_GPK(12), SND_SOC_DAPM_EVENT_OFF(event));
+ struct gpio_desc *gpio = snd_soc_card_get_drvdata(&snd_soc_smartq);
+
+ gpiod_set_value(gpio, SND_SOC_DAPM_EVENT_OFF(event));
return 0;
}
@@ -199,62 +198,40 @@ static struct snd_soc_card snd_soc_smartq = {
.num_controls = ARRAY_SIZE(wm8987_smartq_controls),
};
-static struct platform_device *smartq_snd_device;
-
-static int __init smartq_init(void)
+static int smartq_probe(struct platform_device *pdev)
{
+ struct gpio_desc *gpio;
int ret;
- if (!machine_is_smartq7() && !machine_is_smartq5()) {
- pr_info("Only SmartQ is supported by this ASoC driver\n");
- return -ENODEV;
- }
-
- smartq_snd_device = platform_device_alloc("soc-audio", -1);
- if (!smartq_snd_device)
- return -ENOMEM;
-
- platform_set_drvdata(smartq_snd_device, &snd_soc_smartq);
-
- ret = platform_device_add(smartq_snd_device);
- if (ret) {
- platform_device_put(smartq_snd_device);
- return ret;
- }
+ platform_set_drvdata(pdev, &snd_soc_smartq);
/* Initialise GPIOs used by amplifiers */
- ret = gpio_request(S3C64XX_GPK(12), "amplifiers shutdown");
- if (ret) {
- dev_err(&smartq_snd_device->dev, "Failed to register GPK12\n");
- goto err_unregister_device;
+ gpio = devm_gpiod_get(&pdev->dev, "amplifiers shutdown",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(gpio)) {
+ dev_err(&pdev->dev, "Failed to register GPK12\n");
+ ret = PTR_ERR(gpio);
+ goto out;
}
+ snd_soc_card_set_drvdata(&snd_soc_smartq, gpio);
- /* Disable amplifiers */
- ret = gpio_direction_output(S3C64XX_GPK(12), 1);
- if (ret) {
- dev_err(&smartq_snd_device->dev, "Failed to configure GPK12\n");
- goto err_free_gpio_amp_shut;
- }
-
- return 0;
-
-err_free_gpio_amp_shut:
- gpio_free(S3C64XX_GPK(12));
-err_unregister_device:
- platform_device_unregister(smartq_snd_device);
+ ret = devm_snd_soc_register_card(&pdev->dev, &snd_soc_smartq);
+ if (ret)
+ dev_err(&pdev->dev, "Failed to register card\n");
+out:
return ret;
}
-static void __exit smartq_exit(void)
-{
- gpio_free(S3C64XX_GPK(12));
-
- platform_device_unregister(smartq_snd_device);
-}
+static struct platform_driver smartq_driver = {
+ .driver = {
+ .name = "smartq-audio",
+ .owner = THIS_MODULE,
+ },
+ .probe = smartq_probe,
+};
-module_init(smartq_init);
-module_exit(smartq_exit);
+module_platform_driver(smartq_driver);
/* Module information */
MODULE_AUTHOR("Maurus Cuelenaere <mcuelenaere@gmail.com>");
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH 03/10] gpio: samsung: move gpio-samsung driver back to platform code
2015-11-25 16:06 ` Arnd Bergmann
@ 2015-11-25 16:06 ` Arnd Bergmann
-1 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-11-25 16:06 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, Kukjin Kim, Krzysztof Kozlowski, Mark Brown,
Vasily Khoruzhick, Charles Keepax, Tomasz Figa, Ben Dooks,
linux-samsung-soc, Arnd Bergmann
The gpio-samsung driver is special in the sense that it
interacts directly in multiple ways with the legacy platform
code for the s3c24xx and s3c64xx platforms. In contrast,
all devicetree based machines for Samsung, including the
ones on those two SoC families use a different driver.
The header files that define the interface between the platform
code and the gpio driver are not visible when building a
kernel for ARCH_MULTIPLATFORM, which prevents us from
turning on this option for s3c64xx.
To work around this, we now move the driver back into platform
code, from where it was originally moved to as part of commit
1b39d5f2cc5c28 ("gpio/samsung: gpio-samsung.c to support
Samsung GPIOs").
The long-term plan for this driver would be to remove it
entirely, after all Samsung machines have been converted
over to boot from DT, but there is currently no timeline
for when that might happen.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/plat-samsung/Kconfig | 3 +++
arch/arm/plat-samsung/Makefile | 2 ++
{drivers/gpio => arch/arm/plat-samsung}/gpio-samsung.c | 0
drivers/gpio/Kconfig | 7 -------
drivers/gpio/Makefile | 1 -
5 files changed, 5 insertions(+), 8 deletions(-)
rename {drivers/gpio => arch/arm/plat-samsung}/gpio-samsung.c (100%)
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 57729b915003..83697414bfa0 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -294,6 +294,9 @@ config SAMSUNG_WDT_RESET
Compile support for system restart by triggering watchdog reset.
Used on SoCs that do not provide dedicated reset control.
+config GPIO_SAMSUNG
+ def_bool SAMSUNG_ATAGS
+
config DEBUG_S3C_UART
depends on PLAT_SAMSUNG
int
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 8c911760f55f..aeb19e3288b9 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -21,6 +21,8 @@ obj-$(CONFIG_SAMSUNG_ATAGS) += platformdata.o
obj-$(CONFIG_SAMSUNG_ATAGS) += devs.o
obj-$(CONFIG_SAMSUNG_ATAGS) += dev-uart.o
+obj-$(CONFIG_GPIO_SAMSUNG) += gpio-samsung.o
+
# PM support
obj-$(CONFIG_PM_SLEEP) += pm-common.o
diff --git a/drivers/gpio/gpio-samsung.c b/arch/arm/plat-samsung/gpio-samsung.c
similarity index 100%
rename from drivers/gpio/gpio-samsung.c
rename to arch/arm/plat-samsung/gpio-samsung.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b18bea08ff25..5e4e9f5c8a64 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -344,13 +344,6 @@ config GPIO_RCAR
help
Say yes here to support GPIO on Renesas R-Car SoCs.
-config GPIO_SAMSUNG
- bool
- depends on PLAT_SAMSUNG
- help
- Legacy GPIO support. Use only for platforms without support for
- pinctrl.
-
config GPIO_SPEAR_SPICS
bool "ST SPEAr13xx SPI Chip Select as GPIO support"
depends on PLAT_SPEAR
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 986dbd838cea..8555e947372e 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -79,7 +79,6 @@ obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
-obj-$(CONFIG_GPIO_SAMSUNG) += gpio-samsung.o
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
obj-$(CONFIG_GPIO_SCH311X) += gpio-sch311x.o
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH 03/10] gpio: samsung: move gpio-samsung driver back to platform code
@ 2015-11-25 16:06 ` Arnd Bergmann
0 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-11-25 16:06 UTC (permalink / raw)
To: linux-arm-kernel
The gpio-samsung driver is special in the sense that it
interacts directly in multiple ways with the legacy platform
code for the s3c24xx and s3c64xx platforms. In contrast,
all devicetree based machines for Samsung, including the
ones on those two SoC families use a different driver.
The header files that define the interface between the platform
code and the gpio driver are not visible when building a
kernel for ARCH_MULTIPLATFORM, which prevents us from
turning on this option for s3c64xx.
To work around this, we now move the driver back into platform
code, from where it was originally moved to as part of commit
1b39d5f2cc5c28 ("gpio/samsung: gpio-samsung.c to support
Samsung GPIOs").
The long-term plan for this driver would be to remove it
entirely, after all Samsung machines have been converted
over to boot from DT, but there is currently no timeline
for when that might happen.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/plat-samsung/Kconfig | 3 +++
arch/arm/plat-samsung/Makefile | 2 ++
{drivers/gpio => arch/arm/plat-samsung}/gpio-samsung.c | 0
drivers/gpio/Kconfig | 7 -------
drivers/gpio/Makefile | 1 -
5 files changed, 5 insertions(+), 8 deletions(-)
rename {drivers/gpio => arch/arm/plat-samsung}/gpio-samsung.c (100%)
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 57729b915003..83697414bfa0 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -294,6 +294,9 @@ config SAMSUNG_WDT_RESET
Compile support for system restart by triggering watchdog reset.
Used on SoCs that do not provide dedicated reset control.
+config GPIO_SAMSUNG
+ def_bool SAMSUNG_ATAGS
+
config DEBUG_S3C_UART
depends on PLAT_SAMSUNG
int
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 8c911760f55f..aeb19e3288b9 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -21,6 +21,8 @@ obj-$(CONFIG_SAMSUNG_ATAGS) += platformdata.o
obj-$(CONFIG_SAMSUNG_ATAGS) += devs.o
obj-$(CONFIG_SAMSUNG_ATAGS) += dev-uart.o
+obj-$(CONFIG_GPIO_SAMSUNG) += gpio-samsung.o
+
# PM support
obj-$(CONFIG_PM_SLEEP) += pm-common.o
diff --git a/drivers/gpio/gpio-samsung.c b/arch/arm/plat-samsung/gpio-samsung.c
similarity index 100%
rename from drivers/gpio/gpio-samsung.c
rename to arch/arm/plat-samsung/gpio-samsung.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b18bea08ff25..5e4e9f5c8a64 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -344,13 +344,6 @@ config GPIO_RCAR
help
Say yes here to support GPIO on Renesas R-Car SoCs.
-config GPIO_SAMSUNG
- bool
- depends on PLAT_SAMSUNG
- help
- Legacy GPIO support. Use only for platforms without support for
- pinctrl.
-
config GPIO_SPEAR_SPICS
bool "ST SPEAr13xx SPI Chip Select as GPIO support"
depends on PLAT_SPEAR
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 986dbd838cea..8555e947372e 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -79,7 +79,6 @@ obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
-obj-$(CONFIG_GPIO_SAMSUNG) += gpio-samsung.o
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
obj-$(CONFIG_GPIO_SCH311X) += gpio-sch311x.o
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH 04/10] ARM: s3c64xx: prepare initcalls for multiplatform
2015-11-25 16:06 ` Arnd Bergmann
@ 2015-11-25 16:06 ` Arnd Bergmann
-1 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-11-25 16:06 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, Kukjin Kim, Krzysztof Kozlowski, Mark Brown,
Vasily Khoruzhick, Charles Keepax, Tomasz Figa, Ben Dooks,
linux-samsung-soc, Arnd Bergmann
In a multiplatform kernel, each initcall is run regardless
of the platform it is meant for, so it must not attempt to
access SoC-specific registers.
This adds 'if (soc_is_s3c64xx)' to all initcalls that are
specific to the s3c64xx platform, to prevent them from breaking
other platforms once we can build them into a combined kernel.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-s3c64xx/common.c | 4 ++--
arch/arm/mach-s3c64xx/cpuidle.c | 5 ++++-
arch/arm/mach-s3c64xx/irq-pm.c | 2 +-
arch/arm/mach-s3c64xx/mach-crag6410-module.c | 4 ++++
arch/arm/mach-s3c64xx/pl080.c | 4 ++++
arch/arm/mach-s3c64xx/pm.c | 4 ++++
arch/arm/mach-s3c64xx/s3c6400.c | 2 +-
arch/arm/mach-s3c64xx/s3c6410.c | 2 +-
arch/arm/plat-samsung/gpio-samsung.c | 11 +++++------
arch/arm/plat-samsung/init.c | 5 +++++
10 files changed, 31 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index ddb30b8434c5..3dea4a4ef165 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -208,7 +208,7 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
static __init int s3c64xx_dev_init(void)
{
/* Not applicable when using DT. */
- if (of_have_populated_dt())
+ if (of_have_populated_dt() || !soc_is_s3c64xx())
return 0;
subsys_system_register(&s3c64xx_subsys, NULL);
@@ -413,7 +413,7 @@ static int __init s3c64xx_init_irq_eint(void)
int irq;
/* On DT-enabled systems EINTs are handled by pinctrl-s3c64xx driver. */
- if (of_have_populated_dt())
+ if (of_have_populated_dt() || !soc_is_s3c64xx())
return -ENODEV;
for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-s3c64xx/cpuidle.c
index 93aa8cb70195..5322db51150e 100644
--- a/arch/arm/mach-s3c64xx/cpuidle.c
+++ b/arch/arm/mach-s3c64xx/cpuidle.c
@@ -18,6 +18,7 @@
#include <asm/cpuidle.h>
+#include <plat/cpu.h>
#include <mach/map.h>
#include "regs-sys.h"
@@ -57,6 +58,8 @@ static struct cpuidle_driver s3c64xx_cpuidle_driver = {
static int __init s3c64xx_init_cpuidle(void)
{
- return cpuidle_register(&s3c64xx_cpuidle_driver, NULL);
+ if (soc_is_s3c64xx())
+ return cpuidle_register(&s3c64xx_cpuidle_driver, NULL);
+ return 0;
}
device_initcall(s3c64xx_init_cpuidle);
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
index ae4ea7601f60..0bbf1faaee42 100644
--- a/arch/arm/mach-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -113,7 +113,7 @@ static struct syscore_ops s3c64xx_irq_syscore_ops = {
static __init int s3c64xx_syscore_init(void)
{
/* Appropriate drivers (pinctrl, uart) handle this when using DT. */
- if (of_have_populated_dt())
+ if (of_have_populated_dt() || !soc_is_s3c64xx())
return 0;
register_syscore_ops(&s3c64xx_irq_syscore_ops);
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 9c00d83f7151..be21f06e6b3f 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -29,6 +29,7 @@
#include <linux/platform_data/spi-s3c64xx.h>
+#include <plat/cpu.h>
#include "crag6410.h"
static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
@@ -399,6 +400,9 @@ static struct i2c_driver wlf_gf_module_driver = {
static int __init wlf_gf_module_register(void)
{
+ if (!soc_is_s3c64xx())
+ return 0;
+
return i2c_add_driver(&wlf_gf_module_driver);
}
device_initcall(wlf_gf_module_register);
diff --git a/arch/arm/mach-s3c64xx/pl080.c b/arch/arm/mach-s3c64xx/pl080.c
index 901a984bddc2..89c5a62830a7 100644
--- a/arch/arm/mach-s3c64xx/pl080.c
+++ b/arch/arm/mach-s3c64xx/pl080.c
@@ -14,6 +14,7 @@
#include <linux/amba/pl08x.h>
#include <linux/of.h>
+#include <plat/cpu.h>
#include <mach/irqs.h>
#include <mach/map.h>
@@ -230,6 +231,9 @@ static AMBA_AHB_DEVICE(s3c64xx_dma1, "dma-pl080s.1", 0,
static int __init s3c64xx_pl080_init(void)
{
+ if (!soc_is_s3c64xx())
+ return 0;
+
/* Set all DMA configuration to be DMA, not SDMA */
writel(0xffffff, S3C64XX_SDMA_SEL);
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 75b14e756383..59d91b83b03d 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -22,6 +22,7 @@
#include <mach/map.h>
#include <mach/irqs.h>
+#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/pm.h>
#include <plat/wakeup-mask.h>
@@ -332,6 +333,9 @@ int __init s3c64xx_pm_init(void)
static __init int s3c64xx_pm_initcall(void)
{
+ if (!soc_is_s3c64xx())
+ return 0;
+
pm_cpu_prep = s3c64xx_pm_prepare;
pm_cpu_sleep = s3c64xx_cpu_suspend;
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
index 33273abef669..5ea82accc773 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -81,7 +81,7 @@ static struct device s3c6400_dev = {
static int __init s3c6400_core_init(void)
{
/* Not applicable when using DT. */
- if (of_have_populated_dt())
+ if (of_have_populated_dt() || soc_is_s3c64xx())
return 0;
return subsys_system_register(&s3c6400_subsys, NULL);
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index eadc48dee0e4..92bb927c4478 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -84,7 +84,7 @@ static struct device s3c6410_dev = {
static int __init s3c6410_core_init(void)
{
/* Not applicable when using DT. */
- if (of_have_populated_dt())
+ if (of_have_populated_dt() || !soc_is_s3c64xx())
return 0;
return subsys_system_register(&s3c6410_subsys, NULL);
diff --git a/arch/arm/plat-samsung/gpio-samsung.c b/arch/arm/plat-samsung/gpio-samsung.c
index 7c288ba4dc87..37faa8eab78f 100644
--- a/arch/arm/plat-samsung/gpio-samsung.c
+++ b/arch/arm/plat-samsung/gpio-samsung.c
@@ -1176,14 +1176,16 @@ static __init int samsung_gpiolib_init(void)
* interfaces. For legacy (non-DT) platforms this driver is used.
*/
if (of_have_populated_dt())
- return -ENODEV;
-
- samsung_gpiolib_set_cfg(samsung_gpio_cfgs, ARRAY_SIZE(samsung_gpio_cfgs));
+ return 0;
if (soc_is_s3c24xx()) {
+ samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
+ ARRAY_SIZE(samsung_gpio_cfgs));
s3c24xx_gpiolib_add_chips(s3c24xx_gpios,
ARRAY_SIZE(s3c24xx_gpios), S3C24XX_VA_GPIO);
} else if (soc_is_s3c64xx()) {
+ samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
+ ARRAY_SIZE(samsung_gpio_cfgs));
samsung_gpiolib_add_2bit_chips(s3c64xx_gpios_2bit,
ARRAY_SIZE(s3c64xx_gpios_2bit),
S3C64XX_VA_GPIO + 0xE0, 0x20);
@@ -1192,9 +1194,6 @@ static __init int samsung_gpiolib_init(void)
S3C64XX_VA_GPIO);
samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2,
ARRAY_SIZE(s3c64xx_gpios_4bit2));
- } else {
- WARN(1, "Unknown SoC in gpio-samsung, no GPIOs added\n");
- return -ENODEV;
}
return 0;
diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c
index 11fbbc26e49f..3776f7e752f0 100644
--- a/arch/arm/plat-samsung/init.c
+++ b/arch/arm/plat-samsung/init.c
@@ -152,6 +152,11 @@ static int __init s3c_arch_init(void)
{
int ret;
+ /* init is only needed for ATAGS based platforms */
+ if (!IS_ENABLED(CONFIG_ATAGS) ||
+ (!soc_is_s3c24xx() && !soc_is_s3c64xx()))
+ return 0;
+
// do the correct init for cpu
if (cpu == NULL) {
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH 04/10] ARM: s3c64xx: prepare initcalls for multiplatform
@ 2015-11-25 16:06 ` Arnd Bergmann
0 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-11-25 16:06 UTC (permalink / raw)
To: linux-arm-kernel
In a multiplatform kernel, each initcall is run regardless
of the platform it is meant for, so it must not attempt to
access SoC-specific registers.
This adds 'if (soc_is_s3c64xx)' to all initcalls that are
specific to the s3c64xx platform, to prevent them from breaking
other platforms once we can build them into a combined kernel.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-s3c64xx/common.c | 4 ++--
arch/arm/mach-s3c64xx/cpuidle.c | 5 ++++-
arch/arm/mach-s3c64xx/irq-pm.c | 2 +-
arch/arm/mach-s3c64xx/mach-crag6410-module.c | 4 ++++
arch/arm/mach-s3c64xx/pl080.c | 4 ++++
arch/arm/mach-s3c64xx/pm.c | 4 ++++
arch/arm/mach-s3c64xx/s3c6400.c | 2 +-
arch/arm/mach-s3c64xx/s3c6410.c | 2 +-
arch/arm/plat-samsung/gpio-samsung.c | 11 +++++------
arch/arm/plat-samsung/init.c | 5 +++++
10 files changed, 31 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index ddb30b8434c5..3dea4a4ef165 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -208,7 +208,7 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
static __init int s3c64xx_dev_init(void)
{
/* Not applicable when using DT. */
- if (of_have_populated_dt())
+ if (of_have_populated_dt() || !soc_is_s3c64xx())
return 0;
subsys_system_register(&s3c64xx_subsys, NULL);
@@ -413,7 +413,7 @@ static int __init s3c64xx_init_irq_eint(void)
int irq;
/* On DT-enabled systems EINTs are handled by pinctrl-s3c64xx driver. */
- if (of_have_populated_dt())
+ if (of_have_populated_dt() || !soc_is_s3c64xx())
return -ENODEV;
for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-s3c64xx/cpuidle.c
index 93aa8cb70195..5322db51150e 100644
--- a/arch/arm/mach-s3c64xx/cpuidle.c
+++ b/arch/arm/mach-s3c64xx/cpuidle.c
@@ -18,6 +18,7 @@
#include <asm/cpuidle.h>
+#include <plat/cpu.h>
#include <mach/map.h>
#include "regs-sys.h"
@@ -57,6 +58,8 @@ static struct cpuidle_driver s3c64xx_cpuidle_driver = {
static int __init s3c64xx_init_cpuidle(void)
{
- return cpuidle_register(&s3c64xx_cpuidle_driver, NULL);
+ if (soc_is_s3c64xx())
+ return cpuidle_register(&s3c64xx_cpuidle_driver, NULL);
+ return 0;
}
device_initcall(s3c64xx_init_cpuidle);
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
index ae4ea7601f60..0bbf1faaee42 100644
--- a/arch/arm/mach-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -113,7 +113,7 @@ static struct syscore_ops s3c64xx_irq_syscore_ops = {
static __init int s3c64xx_syscore_init(void)
{
/* Appropriate drivers (pinctrl, uart) handle this when using DT. */
- if (of_have_populated_dt())
+ if (of_have_populated_dt() || !soc_is_s3c64xx())
return 0;
register_syscore_ops(&s3c64xx_irq_syscore_ops);
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 9c00d83f7151..be21f06e6b3f 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -29,6 +29,7 @@
#include <linux/platform_data/spi-s3c64xx.h>
+#include <plat/cpu.h>
#include "crag6410.h"
static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
@@ -399,6 +400,9 @@ static struct i2c_driver wlf_gf_module_driver = {
static int __init wlf_gf_module_register(void)
{
+ if (!soc_is_s3c64xx())
+ return 0;
+
return i2c_add_driver(&wlf_gf_module_driver);
}
device_initcall(wlf_gf_module_register);
diff --git a/arch/arm/mach-s3c64xx/pl080.c b/arch/arm/mach-s3c64xx/pl080.c
index 901a984bddc2..89c5a62830a7 100644
--- a/arch/arm/mach-s3c64xx/pl080.c
+++ b/arch/arm/mach-s3c64xx/pl080.c
@@ -14,6 +14,7 @@
#include <linux/amba/pl08x.h>
#include <linux/of.h>
+#include <plat/cpu.h>
#include <mach/irqs.h>
#include <mach/map.h>
@@ -230,6 +231,9 @@ static AMBA_AHB_DEVICE(s3c64xx_dma1, "dma-pl080s.1", 0,
static int __init s3c64xx_pl080_init(void)
{
+ if (!soc_is_s3c64xx())
+ return 0;
+
/* Set all DMA configuration to be DMA, not SDMA */
writel(0xffffff, S3C64XX_SDMA_SEL);
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 75b14e756383..59d91b83b03d 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -22,6 +22,7 @@
#include <mach/map.h>
#include <mach/irqs.h>
+#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/pm.h>
#include <plat/wakeup-mask.h>
@@ -332,6 +333,9 @@ int __init s3c64xx_pm_init(void)
static __init int s3c64xx_pm_initcall(void)
{
+ if (!soc_is_s3c64xx())
+ return 0;
+
pm_cpu_prep = s3c64xx_pm_prepare;
pm_cpu_sleep = s3c64xx_cpu_suspend;
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
index 33273abef669..5ea82accc773 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -81,7 +81,7 @@ static struct device s3c6400_dev = {
static int __init s3c6400_core_init(void)
{
/* Not applicable when using DT. */
- if (of_have_populated_dt())
+ if (of_have_populated_dt() || soc_is_s3c64xx())
return 0;
return subsys_system_register(&s3c6400_subsys, NULL);
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index eadc48dee0e4..92bb927c4478 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -84,7 +84,7 @@ static struct device s3c6410_dev = {
static int __init s3c6410_core_init(void)
{
/* Not applicable when using DT. */
- if (of_have_populated_dt())
+ if (of_have_populated_dt() || !soc_is_s3c64xx())
return 0;
return subsys_system_register(&s3c6410_subsys, NULL);
diff --git a/arch/arm/plat-samsung/gpio-samsung.c b/arch/arm/plat-samsung/gpio-samsung.c
index 7c288ba4dc87..37faa8eab78f 100644
--- a/arch/arm/plat-samsung/gpio-samsung.c
+++ b/arch/arm/plat-samsung/gpio-samsung.c
@@ -1176,14 +1176,16 @@ static __init int samsung_gpiolib_init(void)
* interfaces. For legacy (non-DT) platforms this driver is used.
*/
if (of_have_populated_dt())
- return -ENODEV;
-
- samsung_gpiolib_set_cfg(samsung_gpio_cfgs, ARRAY_SIZE(samsung_gpio_cfgs));
+ return 0;
if (soc_is_s3c24xx()) {
+ samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
+ ARRAY_SIZE(samsung_gpio_cfgs));
s3c24xx_gpiolib_add_chips(s3c24xx_gpios,
ARRAY_SIZE(s3c24xx_gpios), S3C24XX_VA_GPIO);
} else if (soc_is_s3c64xx()) {
+ samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
+ ARRAY_SIZE(samsung_gpio_cfgs));
samsung_gpiolib_add_2bit_chips(s3c64xx_gpios_2bit,
ARRAY_SIZE(s3c64xx_gpios_2bit),
S3C64XX_VA_GPIO + 0xE0, 0x20);
@@ -1192,9 +1194,6 @@ static __init int samsung_gpiolib_init(void)
S3C64XX_VA_GPIO);
samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2,
ARRAY_SIZE(s3c64xx_gpios_4bit2));
- } else {
- WARN(1, "Unknown SoC in gpio-samsung, no GPIOs added\n");
- return -ENODEV;
}
return 0;
diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c
index 11fbbc26e49f..3776f7e752f0 100644
--- a/arch/arm/plat-samsung/init.c
+++ b/arch/arm/plat-samsung/init.c
@@ -152,6 +152,11 @@ static int __init s3c_arch_init(void)
{
int ret;
+ /* init is only needed for ATAGS based platforms */
+ if (!IS_ENABLED(CONFIG_ATAGS) ||
+ (!soc_is_s3c24xx() && !soc_is_s3c64xx()))
+ return 0;
+
// do the correct init for cpu
if (cpu == NULL) {
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH 05/10] ARM: s3c64xx: enable sparse IRQ support
2015-11-25 16:06 ` Arnd Bergmann
@ 2015-11-25 16:06 ` Arnd Bergmann
-1 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-11-25 16:06 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, Kukjin Kim, Krzysztof Kozlowski, Mark Brown,
Vasily Khoruzhick, Charles Keepax, Tomasz Figa, Ben Dooks,
linux-samsung-soc, Arnd Bergmann
This is another prerequisite for enabling multiplatform
support, and it is the part I am least certain about.
I assume it will cause the extra boot message "Cannot
allocate irq_descs @ IRQ%d, assuming pre-allocated" to
be printed, but otherwise work ok. This definitely needs
to be tested on real hardware to see if it works.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/Kconfig | 1 +
arch/arm/mach-s3c64xx/common.c | 1 +
arch/arm/mach-s3c64xx/dev-uart.c | 1 +
arch/arm/mach-s3c64xx/include/mach/irqs.h | 20 +++-----------------
arch/arm/mach-s3c64xx/include/mach/pm-core.h | 1 +
arch/arm/mach-s3c64xx/mach-anw6410.c | 3 ++-
arch/arm/mach-s3c64xx/mach-crag6410-module.c | 2 ++
arch/arm/mach-s3c64xx/mach-crag6410.c | 2 ++
arch/arm/mach-s3c64xx/mach-hmt.c | 2 ++
arch/arm/mach-s3c64xx/mach-mini6410.c | 2 ++
arch/arm/mach-s3c64xx/mach-ncp.c | 2 ++
arch/arm/mach-s3c64xx/mach-real6410.c | 3 ++-
arch/arm/mach-s3c64xx/mach-smartq5.c | 2 ++
arch/arm/mach-s3c64xx/mach-smartq7.c | 2 ++
arch/arm/mach-s3c64xx/mach-smdk6400.c | 3 ++-
arch/arm/mach-s3c64xx/mach-smdk6410.c | 3 ++-
arch/arm/plat-samsung/gpio-samsung.c | 1 +
17 files changed, 30 insertions(+), 21 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 83f42877328d..1ec6a153d8e5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -649,6 +649,7 @@ config ARCH_S3C64XX
select SAMSUNG_ATAGS
select SAMSUNG_WAKEMASK
select SAMSUNG_WDT_RESET
+ select SPARSE_IRQ
help
Samsung S3C64XX series based systems
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index 3dea4a4ef165..7c66ce1a6bb6 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -39,6 +39,7 @@
#include <asm/system_misc.h>
#include <mach/map.h>
+#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
diff --git a/arch/arm/mach-s3c64xx/dev-uart.c b/arch/arm/mach-s3c64xx/dev-uart.c
index 46e18d77ea93..a0b4f0329811 100644
--- a/arch/arm/mach-s3c64xx/dev-uart.c
+++ b/arch/arm/mach-s3c64xx/dev-uart.c
@@ -23,6 +23,7 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/map.h>
+#include <mach/irqs.h>
#include <plat/devs.h>
diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h
index 67bbd1dd04c2..3ceb00b5de07 100644
--- a/arch/arm/mach-s3c64xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h
@@ -156,25 +156,11 @@
#define IRQ_EINT_GROUP(group, no) (IRQ_EINT_GROUP##group##_BASE + (no))
-/* Define a group of interrupts for board-specific use (eg, for MFD
- * interrupt controllers). */
+/* Some boards have their own IRQs behind this */
#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
-#ifdef CONFIG_MACH_WLF_CRAGG_6410
-#define IRQ_BOARD_NR 160
-#elif defined(CONFIG_SMDK6410_WM1190_EV1)
-#define IRQ_BOARD_NR 64
-#elif defined(CONFIG_SMDK6410_WM1192_EV1)
-#define IRQ_BOARD_NR 64
-#else
-#define IRQ_BOARD_NR 16
-#endif
-
-#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
-
-/* Set the default NR_IRQS */
-
-#define NR_IRQS (IRQ_BOARD_END + 1)
+/* Set the default nr_irqs, boards can override if necessary */
+#define S3C64XX_NR_IRQS IRQ_BOARD_START
/* Compatibility */
diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
index a30a1e3ffc6a..32d2ff54f82d 100644
--- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
@@ -18,6 +18,7 @@
#include <linux/serial_s3c.h>
#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
static inline void s3c_pm_debug_init_uart(void)
{
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index 6224c67f5061..347ce6009a8c 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -47,6 +47,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <mach/irqs.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
#include <plat/samsung-time.h>
@@ -229,7 +230,7 @@ static void __init anw6410_machine_init(void)
MACHINE_START(ANW6410, "A&W6410")
/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
.atag_offset = 0x100,
-
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = anw6410_map_io,
.init_machine = anw6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index be21f06e6b3f..571f95cc5a53 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -30,6 +30,8 @@
#include <linux/platform_data/spi-s3c64xx.h>
#include <plat/cpu.h>
+#include <mach/irqs.h>
+
#include "crag6410.h"
static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index f776adcdaee8..a237b9b117b5 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -52,6 +52,7 @@
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
+#include <mach/irqs.h>
#include <plat/fb.h>
#include <plat/sdhci.h>
@@ -860,6 +861,7 @@ static void __init crag6410_machine_init(void)
MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
/* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = crag6410_map_io,
.init_machine = crag6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index 816b39d1e6d1..bc7dc1fcbf7d 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -31,6 +31,7 @@
#include <video/samsung_fimd.h>
#include <mach/hardware.h>
#include <mach/map.h>
+#include <mach/irqs.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
@@ -279,6 +280,7 @@ static void __init hmt_machine_init(void)
MACHINE_START(HMT, "Airgoo-HMT")
/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = hmt_map_io,
.init_machine = hmt_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index ab61af50bfb9..3ce5842ed51b 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -41,6 +41,7 @@
#include <linux/platform_data/mmc-sdhci-s3c.h>
#include <plat/sdhci.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <mach/irqs.h>
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
@@ -363,6 +364,7 @@ static void __init mini6410_machine_init(void)
MACHINE_START(MINI6410, "MINI6410")
/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = mini6410_map_io,
.init_machine = mini6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 80cb1446f69f..23baaa04318c 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -31,6 +31,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/map.h>
@@ -100,6 +101,7 @@ static void __init ncp_machine_init(void)
MACHINE_START(NCP, "NCP")
/* Maintainer: Samsung Electronics */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = ncp_map_io,
.init_machine = ncp_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 85fa9598b980..ca6548a1ed3b 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -33,6 +33,7 @@
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
+#include <mach/irqs.h>
#include <plat/adc.h>
#include <plat/cpu.h>
@@ -331,7 +332,7 @@ static void __init real6410_machine_init(void)
MACHINE_START(REAL6410, "REAL6410")
/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
.atag_offset = 0x100,
-
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = real6410_map_io,
.init_machine = real6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index 33224ab36fac..0972b6ce0ef6 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -21,6 +21,7 @@
#include <asm/mach/arch.h>
#include <video/samsung_fimd.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
@@ -153,6 +154,7 @@ static void __init smartq5_machine_init(void)
MACHINE_START(SMARTQ5, "SmartQ 5")
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = smartq_map_io,
.init_machine = smartq5_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index fc7fece22fb0..51ac1c6c654a 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -21,6 +21,7 @@
#include <asm/mach/arch.h>
#include <video/samsung_fimd.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
@@ -169,6 +170,7 @@ static void __init smartq7_machine_init(void)
MACHINE_START(SMARTQ7, "SmartQ 7")
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = smartq_map_io,
.init_machine = smartq7_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index 6f425126a735..7d8a74fd8915 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -27,6 +27,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/map.h>
@@ -88,7 +89,7 @@ static void __init smdk6400_machine_init(void)
MACHINE_START(SMDK6400, "SMDK6400")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.atag_offset = 0x100,
-
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6400_init_irq,
.map_io = smdk6400_map_io,
.init_machine = smdk6400_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 30fd27853072..34d31bd48954 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -52,6 +52,7 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include <asm/irq.h>
@@ -707,7 +708,7 @@ static void __init smdk6410_machine_init(void)
MACHINE_START(SMDK6410, "SMDK6410")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.atag_offset = 0x100,
-
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = smdk6410_map_io,
.init_machine = smdk6410_machine_init,
diff --git a/arch/arm/plat-samsung/gpio-samsung.c b/arch/arm/plat-samsung/gpio-samsung.c
index 37faa8eab78f..287c3df8b4c6 100644
--- a/arch/arm/plat-samsung/gpio-samsung.c
+++ b/arch/arm/plat-samsung/gpio-samsung.c
@@ -30,6 +30,7 @@
#include <asm/irq.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH 05/10] ARM: s3c64xx: enable sparse IRQ support
@ 2015-11-25 16:06 ` Arnd Bergmann
0 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-11-25 16:06 UTC (permalink / raw)
To: linux-arm-kernel
This is another prerequisite for enabling multiplatform
support, and it is the part I am least certain about.
I assume it will cause the extra boot message "Cannot
allocate irq_descs @ IRQ%d, assuming pre-allocated" to
be printed, but otherwise work ok. This definitely needs
to be tested on real hardware to see if it works.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/Kconfig | 1 +
arch/arm/mach-s3c64xx/common.c | 1 +
arch/arm/mach-s3c64xx/dev-uart.c | 1 +
arch/arm/mach-s3c64xx/include/mach/irqs.h | 20 +++-----------------
arch/arm/mach-s3c64xx/include/mach/pm-core.h | 1 +
arch/arm/mach-s3c64xx/mach-anw6410.c | 3 ++-
arch/arm/mach-s3c64xx/mach-crag6410-module.c | 2 ++
arch/arm/mach-s3c64xx/mach-crag6410.c | 2 ++
arch/arm/mach-s3c64xx/mach-hmt.c | 2 ++
arch/arm/mach-s3c64xx/mach-mini6410.c | 2 ++
arch/arm/mach-s3c64xx/mach-ncp.c | 2 ++
arch/arm/mach-s3c64xx/mach-real6410.c | 3 ++-
arch/arm/mach-s3c64xx/mach-smartq5.c | 2 ++
arch/arm/mach-s3c64xx/mach-smartq7.c | 2 ++
arch/arm/mach-s3c64xx/mach-smdk6400.c | 3 ++-
arch/arm/mach-s3c64xx/mach-smdk6410.c | 3 ++-
arch/arm/plat-samsung/gpio-samsung.c | 1 +
17 files changed, 30 insertions(+), 21 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 83f42877328d..1ec6a153d8e5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -649,6 +649,7 @@ config ARCH_S3C64XX
select SAMSUNG_ATAGS
select SAMSUNG_WAKEMASK
select SAMSUNG_WDT_RESET
+ select SPARSE_IRQ
help
Samsung S3C64XX series based systems
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index 3dea4a4ef165..7c66ce1a6bb6 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -39,6 +39,7 @@
#include <asm/system_misc.h>
#include <mach/map.h>
+#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
diff --git a/arch/arm/mach-s3c64xx/dev-uart.c b/arch/arm/mach-s3c64xx/dev-uart.c
index 46e18d77ea93..a0b4f0329811 100644
--- a/arch/arm/mach-s3c64xx/dev-uart.c
+++ b/arch/arm/mach-s3c64xx/dev-uart.c
@@ -23,6 +23,7 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/map.h>
+#include <mach/irqs.h>
#include <plat/devs.h>
diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h
index 67bbd1dd04c2..3ceb00b5de07 100644
--- a/arch/arm/mach-s3c64xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h
@@ -156,25 +156,11 @@
#define IRQ_EINT_GROUP(group, no) (IRQ_EINT_GROUP##group##_BASE + (no))
-/* Define a group of interrupts for board-specific use (eg, for MFD
- * interrupt controllers). */
+/* Some boards have their own IRQs behind this */
#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
-#ifdef CONFIG_MACH_WLF_CRAGG_6410
-#define IRQ_BOARD_NR 160
-#elif defined(CONFIG_SMDK6410_WM1190_EV1)
-#define IRQ_BOARD_NR 64
-#elif defined(CONFIG_SMDK6410_WM1192_EV1)
-#define IRQ_BOARD_NR 64
-#else
-#define IRQ_BOARD_NR 16
-#endif
-
-#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
-
-/* Set the default NR_IRQS */
-
-#define NR_IRQS (IRQ_BOARD_END + 1)
+/* Set the default nr_irqs, boards can override if necessary */
+#define S3C64XX_NR_IRQS IRQ_BOARD_START
/* Compatibility */
diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
index a30a1e3ffc6a..32d2ff54f82d 100644
--- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
@@ -18,6 +18,7 @@
#include <linux/serial_s3c.h>
#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
static inline void s3c_pm_debug_init_uart(void)
{
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index 6224c67f5061..347ce6009a8c 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -47,6 +47,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <mach/irqs.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
#include <plat/samsung-time.h>
@@ -229,7 +230,7 @@ static void __init anw6410_machine_init(void)
MACHINE_START(ANW6410, "A&W6410")
/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
.atag_offset = 0x100,
-
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = anw6410_map_io,
.init_machine = anw6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index be21f06e6b3f..571f95cc5a53 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -30,6 +30,8 @@
#include <linux/platform_data/spi-s3c64xx.h>
#include <plat/cpu.h>
+#include <mach/irqs.h>
+
#include "crag6410.h"
static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index f776adcdaee8..a237b9b117b5 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -52,6 +52,7 @@
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
+#include <mach/irqs.h>
#include <plat/fb.h>
#include <plat/sdhci.h>
@@ -860,6 +861,7 @@ static void __init crag6410_machine_init(void)
MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
/* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = crag6410_map_io,
.init_machine = crag6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index 816b39d1e6d1..bc7dc1fcbf7d 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -31,6 +31,7 @@
#include <video/samsung_fimd.h>
#include <mach/hardware.h>
#include <mach/map.h>
+#include <mach/irqs.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
@@ -279,6 +280,7 @@ static void __init hmt_machine_init(void)
MACHINE_START(HMT, "Airgoo-HMT")
/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = hmt_map_io,
.init_machine = hmt_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index ab61af50bfb9..3ce5842ed51b 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -41,6 +41,7 @@
#include <linux/platform_data/mmc-sdhci-s3c.h>
#include <plat/sdhci.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <mach/irqs.h>
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
@@ -363,6 +364,7 @@ static void __init mini6410_machine_init(void)
MACHINE_START(MINI6410, "MINI6410")
/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = mini6410_map_io,
.init_machine = mini6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 80cb1446f69f..23baaa04318c 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -31,6 +31,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/map.h>
@@ -100,6 +101,7 @@ static void __init ncp_machine_init(void)
MACHINE_START(NCP, "NCP")
/* Maintainer: Samsung Electronics */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = ncp_map_io,
.init_machine = ncp_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 85fa9598b980..ca6548a1ed3b 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -33,6 +33,7 @@
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
+#include <mach/irqs.h>
#include <plat/adc.h>
#include <plat/cpu.h>
@@ -331,7 +332,7 @@ static void __init real6410_machine_init(void)
MACHINE_START(REAL6410, "REAL6410")
/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
.atag_offset = 0x100,
-
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = real6410_map_io,
.init_machine = real6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index 33224ab36fac..0972b6ce0ef6 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -21,6 +21,7 @@
#include <asm/mach/arch.h>
#include <video/samsung_fimd.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
@@ -153,6 +154,7 @@ static void __init smartq5_machine_init(void)
MACHINE_START(SMARTQ5, "SmartQ 5")
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = smartq_map_io,
.init_machine = smartq5_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index fc7fece22fb0..51ac1c6c654a 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -21,6 +21,7 @@
#include <asm/mach/arch.h>
#include <video/samsung_fimd.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
@@ -169,6 +170,7 @@ static void __init smartq7_machine_init(void)
MACHINE_START(SMARTQ7, "SmartQ 7")
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = smartq_map_io,
.init_machine = smartq7_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index 6f425126a735..7d8a74fd8915 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -27,6 +27,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/map.h>
@@ -88,7 +89,7 @@ static void __init smdk6400_machine_init(void)
MACHINE_START(SMDK6400, "SMDK6400")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.atag_offset = 0x100,
-
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6400_init_irq,
.map_io = smdk6400_map_io,
.init_machine = smdk6400_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 30fd27853072..34d31bd48954 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -52,6 +52,7 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include <asm/irq.h>
@@ -707,7 +708,7 @@ static void __init smdk6410_machine_init(void)
MACHINE_START(SMDK6410, "SMDK6410")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.atag_offset = 0x100,
-
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = smdk6410_map_io,
.init_machine = smdk6410_machine_init,
diff --git a/arch/arm/plat-samsung/gpio-samsung.c b/arch/arm/plat-samsung/gpio-samsung.c
index 37faa8eab78f..287c3df8b4c6 100644
--- a/arch/arm/plat-samsung/gpio-samsung.c
+++ b/arch/arm/plat-samsung/gpio-samsung.c
@@ -30,6 +30,7 @@
#include <asm/irq.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH 06/10] iio: exynos-adc: add experimental touchscreen support
2015-11-25 16:06 ` Arnd Bergmann
@ 2015-11-25 16:06 ` Arnd Bergmann
-1 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-11-25 16:06 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, Kukjin Kim, Krzysztof Kozlowski, Mark Brown,
Vasily Khoruzhick, Charles Keepax, Tomasz Figa, Ben Dooks,
linux-samsung-soc, Arnd Bergmann
This adds support for the touchscreen on Samsung s3c64xx.
The driver is completely untested but shows roughly how
it could be done, following the example of the at91 driver.
compared to the old plat-samsung/adc driver, there is
no support for prioritizing ts over other clients, nor
for oversampling. From my reading of the code, the
priorities didn't actually have any effect at all, but
the oversampling might be needed.
Verifying this driver is the main issue that is currently
holding up multiplatform support for s3c64xx, so any help
in testing is very much appreciated.
The current version uses the IS_REACHABLE() that is
going to be introduced in the linux-media tree, please
comment this out for testing.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
.../devicetree/bindings/arm/samsung/exynos-adc.txt | 3 +
drivers/iio/adc/exynos_adc.c | 224 ++++++++++++++++++++-
2 files changed, 220 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
index f46ca9a316a2..ccaaec6014bd 100644
--- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
@@ -47,6 +47,9 @@ Required properties:
- samsung,syscon-phandle Contains the PMU system controller node
(To access the ADC_PHY register on Exynos5250/5420/5800/3250)
+Optional properties:
+- has-touchscreen: If present, indicates that a touchscreen is
+ connected an usable.
Note: child nodes can be added for auto probing from device tree.
diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index 3a2dbb3b4926..d11cd604562c 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -35,6 +35,7 @@
#include <linux/regulator/consumer.h>
#include <linux/of_platform.h>
#include <linux/err.h>
+#include <linux/input.h>
#include <linux/iio/iio.h>
#include <linux/iio/machine.h>
@@ -42,12 +43,18 @@
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+
/* S3C/EXYNOS4412/5250 ADC_V1 registers definitions */
#define ADC_V1_CON(x) ((x) + 0x00)
+#define ADC_V1_TSC(x) ((x) + 0x04)
#define ADC_V1_DLY(x) ((x) + 0x08)
#define ADC_V1_DATX(x) ((x) + 0x0C)
+#define ADC_V1_DATY(x) ((x) + 0x10)
+#define ADC_V1_UPDN(x) ((x) + 0x14)
#define ADC_V1_INTCLR(x) ((x) + 0x18)
#define ADC_V1_MUX(x) ((x) + 0x1c)
+#define ADC_V1_CLRINTPNDNUP(x) ((x) + 0x20)
/* S3C2410 ADC registers definitions */
#define ADC_S3C2410_MUX(x) ((x) + 0x18)
@@ -71,6 +78,30 @@
#define ADC_S3C2410_DATX_MASK 0x3FF
#define ADC_S3C2416_CON_RES_SEL (1u << 3)
+/* touch screen always uses channel 0 */
+#define ADC_S3C2410_MUX_TS 0
+
+/* ADCTSC Register Bits */
+#define ADC_S3C2443_TSC_UD_SEN (1u << 8)
+#define ADC_S3C2410_TSC_YM_SEN (1u << 7)
+#define ADC_S3C2410_TSC_YP_SEN (1u << 6)
+#define ADC_S3C2410_TSC_XM_SEN (1u << 5)
+#define ADC_S3C2410_TSC_XP_SEN (1u << 4)
+#define ADC_S3C2410_TSC_PULL_UP_DISABLE (1u << 3)
+#define ADC_S3C2410_TSC_AUTO_PST (1u << 2)
+#define ADC_S3C2410_TSC_XY_PST(x) (((x) & 0x3) << 0)
+
+#define ADC_TSC_WAIT4INT (ADC_S3C2410_TSC_YM_SEN | \
+ ADC_S3C2410_TSC_YP_SEN | \
+ ADC_S3C2410_TSC_XP_SEN | \
+ ADC_S3C2410_TSC_XY_PST(3))
+
+#define ADC_TSC_AUTOPST (ADC_S3C2410_TSC_YM_SEN | \
+ ADC_S3C2410_TSC_YP_SEN | \
+ ADC_S3C2410_TSC_XP_SEN | \
+ ADC_S3C2410_TSC_AUTO_PST | \
+ ADC_S3C2410_TSC_XY_PST(0))
+
/* Bit definitions for ADC_V2 */
#define ADC_V2_CON1_SOFT_RESET (1u << 2)
@@ -88,7 +119,9 @@
/* Bit definitions common for ADC_V1 and ADC_V2 */
#define ADC_CON_EN_START (1u << 0)
#define ADC_CON_EN_START_MASK (0x3 << 0)
+#define ADC_DATX_PRESSED (1u << 15)
#define ADC_DATX_MASK 0xFFF
+#define ADC_DATY_MASK 0xFFF
#define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(100))
@@ -98,17 +131,24 @@
struct exynos_adc {
struct exynos_adc_data *data;
struct device *dev;
+ struct input_dev *input;
void __iomem *regs;
struct regmap *pmu_map;
struct clk *clk;
struct clk *sclk;
unsigned int irq;
+ unsigned int tsirq;
+ unsigned int delay;
struct regulator *vdd;
struct completion completion;
u32 value;
unsigned int version;
+
+ bool read_ts;
+ u32 ts_x;
+ u32 ts_y;
};
struct exynos_adc_data {
@@ -197,6 +237,9 @@ static void exynos_adc_v1_init_hw(struct exynos_adc *info)
/* Enable 12-bit ADC resolution */
con1 |= ADC_V1_CON_RES;
writel(con1, ADC_V1_CON(info->regs));
+
+ /* set touchscreen delay */
+ writel(info->delay, ADC_V1_DLY(info->regs));
}
static void exynos_adc_v1_exit_hw(struct exynos_adc *info)
@@ -480,8 +523,8 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
if (info->data->start_conv)
info->data->start_conv(info, chan->address);
- timeout = wait_for_completion_timeout
- (&info->completion, EXYNOS_ADC_TIMEOUT);
+ timeout = wait_for_completion_timeout(&info->completion,
+ EXYNOS_ADC_TIMEOUT);
if (timeout == 0) {
dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n");
if (info->data->init_hw)
@@ -498,13 +541,55 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
return ret;
}
+static int exynos_read_s3c64xx_ts(struct iio_dev *indio_dev, int *x, int *y)
+{
+ struct exynos_adc *info = iio_priv(indio_dev);
+ unsigned long timeout;
+ int ret;
+
+ mutex_lock(&indio_dev->mlock);
+ info->read_ts = true;
+
+ reinit_completion(&info->completion);
+
+ writel(ADC_S3C2410_TSC_PULL_UP_DISABLE | ADC_TSC_AUTOPST,
+ ADC_V1_TSC(info->regs));
+
+ /* Select the ts channel to be used and Trigger conversion */
+ info->data->start_conv(info, ADC_S3C2410_MUX_TS);
+
+ timeout = wait_for_completion_timeout(&info->completion,
+ EXYNOS_ADC_TIMEOUT);
+ if (timeout == 0) {
+ dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n");
+ if (info->data->init_hw)
+ info->data->init_hw(info);
+ ret = -ETIMEDOUT;
+ } else {
+ *x = info->ts_x;
+ *y = info->ts_y;
+ ret = 0;
+ }
+
+ info->read_ts = false;
+ mutex_unlock(&indio_dev->mlock);
+
+ return ret;
+}
+
static irqreturn_t exynos_adc_isr(int irq, void *dev_id)
{
struct exynos_adc *info = (struct exynos_adc *)dev_id;
u32 mask = info->data->mask;
/* Read value */
- info->value = readl(ADC_V1_DATX(info->regs)) & mask;
+ if (info->read_ts) {
+ info->ts_x = readl(ADC_V1_DATX(info->regs));
+ info->ts_y = readl(ADC_V1_DATY(info->regs));
+ writel(ADC_TSC_WAIT4INT | ADC_S3C2443_TSC_UD_SEN, ADC_V1_TSC(info->regs));
+ } else {
+ info->value = readl(ADC_V1_DATX(info->regs)) & mask;
+ }
/* clear irq */
if (info->data->clear_irq)
@@ -515,6 +600,46 @@ static irqreturn_t exynos_adc_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
+/*
+ * Here we (ab)use a threaded interrupt handler to stay running
+ * for as long as the touchscreen remains pressed, we report
+ * a new event with the latest data and then sleep until the
+ * next timer tick. This mirrors the behavior of the old
+ * driver, with much less code.
+ */
+static irqreturn_t exynos_ts_isr(int irq, void *dev_id)
+{
+ struct exynos_adc *info = dev_id;
+ struct iio_dev *dev = dev_get_drvdata(info->dev);
+ u32 x, y;
+ bool pressed;
+ int ret;
+
+ while (info->input->users) {
+ ret = exynos_read_s3c64xx_ts(dev, &x, &y);
+ if (ret == -ETIMEDOUT)
+ break;
+
+ pressed = x & y & ADC_DATX_PRESSED;
+ if (!pressed) {
+ input_report_key(info->input, BTN_TOUCH, 0);
+ input_sync(info->input);
+ break;
+ }
+
+ input_report_abs(info->input, ABS_X, x & ADC_DATX_MASK);
+ input_report_abs(info->input, ABS_Y, y & ADC_DATY_MASK);
+ input_report_key(info->input, BTN_TOUCH, 1);
+ input_sync(info->input);
+
+ msleep(1);
+ };
+
+ writel(0, ADC_V1_CLRINTPNDNUP(info->regs));
+
+ return IRQ_HANDLED;
+}
+
static int exynos_adc_reg_access(struct iio_dev *indio_dev,
unsigned reg, unsigned writeval,
unsigned *readval)
@@ -566,18 +691,72 @@ static int exynos_adc_remove_devices(struct device *dev, void *c)
return 0;
}
+static int exynos_adc_ts_open(struct input_dev *dev)
+{
+ struct exynos_adc *info = input_get_drvdata(dev);
+
+ enable_irq(info->tsirq);
+
+ return 0;
+}
+
+static void exynos_adc_ts_close(struct input_dev *dev)
+{
+ struct exynos_adc *info = input_get_drvdata(dev);
+
+ disable_irq(info->tsirq);
+}
+
+static int exynos_adc_ts_init(struct exynos_adc *info)
+{
+ int ret;
+
+ if (info->tsirq <= 0)
+ return -ENODEV;
+
+ info->input = input_allocate_device();
+ if (!info->input)
+ return -ENOMEM;
+
+ info->input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ info->input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+ input_set_abs_params(info->input, ABS_X, 0, 0x3FF, 0, 0);
+ input_set_abs_params(info->input, ABS_Y, 0, 0x3FF, 0, 0);
+
+ info->input->name = "S3C24xx TouchScreen";
+ info->input->id.bustype = BUS_HOST;
+ info->input->open = exynos_adc_ts_open;
+ info->input->close = exynos_adc_ts_close;
+
+ input_set_drvdata(info->input, info);
+
+ ret = input_register_device(info->input);
+ if (ret) {
+ input_free_device(info->input);
+ return ret;
+ }
+
+ disable_irq(info->tsirq);
+ ret = request_threaded_irq(info->tsirq, NULL, exynos_ts_isr,
+ 0, "touchscreen", info);
+ if (ret)
+ input_unregister_device(info->input);
+
+ return ret;
+}
+
static int exynos_adc_probe(struct platform_device *pdev)
{
struct exynos_adc *info = NULL;
struct device_node *np = pdev->dev.of_node;
+ struct s3c2410_ts_mach_info *pdata = dev_get_platdata(&pdev->dev);
struct iio_dev *indio_dev = NULL;
struct resource *mem;
+ bool has_ts = false;
int ret = -ENODEV;
int irq;
- if (!np)
- return ret;
-
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct exynos_adc));
if (!indio_dev) {
dev_err(&pdev->dev, "failed allocating iio device\n");
@@ -613,8 +792,14 @@ static int exynos_adc_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "no irq resource?\n");
return irq;
}
-
info->irq = irq;
+
+ irq = platform_get_irq(pdev, 1);
+ if (irq == -EPROBE_DEFER)
+ return irq;
+
+ info->tsirq = irq;
+
info->dev = &pdev->dev;
init_completion(&info->completion);
@@ -680,6 +865,22 @@ static int exynos_adc_probe(struct platform_device *pdev)
if (info->data->init_hw)
info->data->init_hw(info);
+ /* leave out any TS related code if unreachable */
+ if (IS_REACHABLE(CONFIG_INPUT)) {
+ has_ts = of_property_read_bool(pdev->dev.of_node,
+ "has-touchscreen") || pdata;
+ }
+
+ if (pdata)
+ info->delay = pdata->delay;
+ else
+ info->delay = 10000;
+
+ if (has_ts)
+ ret = exynos_adc_ts_init(info);
+ if (ret)
+ goto err_iio;
+
ret = of_platform_populate(np, exynos_adc_match, NULL, &indio_dev->dev);
if (ret < 0) {
dev_err(&pdev->dev, "failed adding child nodes\n");
@@ -691,6 +892,11 @@ static int exynos_adc_probe(struct platform_device *pdev)
err_of_populate:
device_for_each_child(&indio_dev->dev, NULL,
exynos_adc_remove_devices);
+ if (has_ts) {
+ input_unregister_device(info->input);
+ free_irq(info->tsirq, info);
+ }
+err_iio:
iio_device_unregister(indio_dev);
err_irq:
free_irq(info->irq, info);
@@ -710,6 +916,10 @@ static int exynos_adc_remove(struct platform_device *pdev)
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct exynos_adc *info = iio_priv(indio_dev);
+ if (IS_REACHABLE(CONFIG_INPUT)) {
+ free_irq(info->tsirq, info);
+ input_unregister_device(info->input);
+ }
device_for_each_child(&indio_dev->dev, NULL,
exynos_adc_remove_devices);
iio_device_unregister(indio_dev);
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH 06/10] iio: exynos-adc: add experimental touchscreen support
@ 2015-11-25 16:06 ` Arnd Bergmann
0 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-11-25 16:06 UTC (permalink / raw)
To: linux-arm-kernel
This adds support for the touchscreen on Samsung s3c64xx.
The driver is completely untested but shows roughly how
it could be done, following the example of the at91 driver.
compared to the old plat-samsung/adc driver, there is
no support for prioritizing ts over other clients, nor
for oversampling. From my reading of the code, the
priorities didn't actually have any effect at all, but
the oversampling might be needed.
Verifying this driver is the main issue that is currently
holding up multiplatform support for s3c64xx, so any help
in testing is very much appreciated.
The current version uses the IS_REACHABLE() that is
going to be introduced in the linux-media tree, please
comment this out for testing.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
.../devicetree/bindings/arm/samsung/exynos-adc.txt | 3 +
drivers/iio/adc/exynos_adc.c | 224 ++++++++++++++++++++-
2 files changed, 220 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
index f46ca9a316a2..ccaaec6014bd 100644
--- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
@@ -47,6 +47,9 @@ Required properties:
- samsung,syscon-phandle Contains the PMU system controller node
(To access the ADC_PHY register on Exynos5250/5420/5800/3250)
+Optional properties:
+- has-touchscreen: If present, indicates that a touchscreen is
+ connected an usable.
Note: child nodes can be added for auto probing from device tree.
diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index 3a2dbb3b4926..d11cd604562c 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -35,6 +35,7 @@
#include <linux/regulator/consumer.h>
#include <linux/of_platform.h>
#include <linux/err.h>
+#include <linux/input.h>
#include <linux/iio/iio.h>
#include <linux/iio/machine.h>
@@ -42,12 +43,18 @@
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+
/* S3C/EXYNOS4412/5250 ADC_V1 registers definitions */
#define ADC_V1_CON(x) ((x) + 0x00)
+#define ADC_V1_TSC(x) ((x) + 0x04)
#define ADC_V1_DLY(x) ((x) + 0x08)
#define ADC_V1_DATX(x) ((x) + 0x0C)
+#define ADC_V1_DATY(x) ((x) + 0x10)
+#define ADC_V1_UPDN(x) ((x) + 0x14)
#define ADC_V1_INTCLR(x) ((x) + 0x18)
#define ADC_V1_MUX(x) ((x) + 0x1c)
+#define ADC_V1_CLRINTPNDNUP(x) ((x) + 0x20)
/* S3C2410 ADC registers definitions */
#define ADC_S3C2410_MUX(x) ((x) + 0x18)
@@ -71,6 +78,30 @@
#define ADC_S3C2410_DATX_MASK 0x3FF
#define ADC_S3C2416_CON_RES_SEL (1u << 3)
+/* touch screen always uses channel 0 */
+#define ADC_S3C2410_MUX_TS 0
+
+/* ADCTSC Register Bits */
+#define ADC_S3C2443_TSC_UD_SEN (1u << 8)
+#define ADC_S3C2410_TSC_YM_SEN (1u << 7)
+#define ADC_S3C2410_TSC_YP_SEN (1u << 6)
+#define ADC_S3C2410_TSC_XM_SEN (1u << 5)
+#define ADC_S3C2410_TSC_XP_SEN (1u << 4)
+#define ADC_S3C2410_TSC_PULL_UP_DISABLE (1u << 3)
+#define ADC_S3C2410_TSC_AUTO_PST (1u << 2)
+#define ADC_S3C2410_TSC_XY_PST(x) (((x) & 0x3) << 0)
+
+#define ADC_TSC_WAIT4INT (ADC_S3C2410_TSC_YM_SEN | \
+ ADC_S3C2410_TSC_YP_SEN | \
+ ADC_S3C2410_TSC_XP_SEN | \
+ ADC_S3C2410_TSC_XY_PST(3))
+
+#define ADC_TSC_AUTOPST (ADC_S3C2410_TSC_YM_SEN | \
+ ADC_S3C2410_TSC_YP_SEN | \
+ ADC_S3C2410_TSC_XP_SEN | \
+ ADC_S3C2410_TSC_AUTO_PST | \
+ ADC_S3C2410_TSC_XY_PST(0))
+
/* Bit definitions for ADC_V2 */
#define ADC_V2_CON1_SOFT_RESET (1u << 2)
@@ -88,7 +119,9 @@
/* Bit definitions common for ADC_V1 and ADC_V2 */
#define ADC_CON_EN_START (1u << 0)
#define ADC_CON_EN_START_MASK (0x3 << 0)
+#define ADC_DATX_PRESSED (1u << 15)
#define ADC_DATX_MASK 0xFFF
+#define ADC_DATY_MASK 0xFFF
#define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(100))
@@ -98,17 +131,24 @@
struct exynos_adc {
struct exynos_adc_data *data;
struct device *dev;
+ struct input_dev *input;
void __iomem *regs;
struct regmap *pmu_map;
struct clk *clk;
struct clk *sclk;
unsigned int irq;
+ unsigned int tsirq;
+ unsigned int delay;
struct regulator *vdd;
struct completion completion;
u32 value;
unsigned int version;
+
+ bool read_ts;
+ u32 ts_x;
+ u32 ts_y;
};
struct exynos_adc_data {
@@ -197,6 +237,9 @@ static void exynos_adc_v1_init_hw(struct exynos_adc *info)
/* Enable 12-bit ADC resolution */
con1 |= ADC_V1_CON_RES;
writel(con1, ADC_V1_CON(info->regs));
+
+ /* set touchscreen delay */
+ writel(info->delay, ADC_V1_DLY(info->regs));
}
static void exynos_adc_v1_exit_hw(struct exynos_adc *info)
@@ -480,8 +523,8 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
if (info->data->start_conv)
info->data->start_conv(info, chan->address);
- timeout = wait_for_completion_timeout
- (&info->completion, EXYNOS_ADC_TIMEOUT);
+ timeout = wait_for_completion_timeout(&info->completion,
+ EXYNOS_ADC_TIMEOUT);
if (timeout == 0) {
dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n");
if (info->data->init_hw)
@@ -498,13 +541,55 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
return ret;
}
+static int exynos_read_s3c64xx_ts(struct iio_dev *indio_dev, int *x, int *y)
+{
+ struct exynos_adc *info = iio_priv(indio_dev);
+ unsigned long timeout;
+ int ret;
+
+ mutex_lock(&indio_dev->mlock);
+ info->read_ts = true;
+
+ reinit_completion(&info->completion);
+
+ writel(ADC_S3C2410_TSC_PULL_UP_DISABLE | ADC_TSC_AUTOPST,
+ ADC_V1_TSC(info->regs));
+
+ /* Select the ts channel to be used and Trigger conversion */
+ info->data->start_conv(info, ADC_S3C2410_MUX_TS);
+
+ timeout = wait_for_completion_timeout(&info->completion,
+ EXYNOS_ADC_TIMEOUT);
+ if (timeout == 0) {
+ dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n");
+ if (info->data->init_hw)
+ info->data->init_hw(info);
+ ret = -ETIMEDOUT;
+ } else {
+ *x = info->ts_x;
+ *y = info->ts_y;
+ ret = 0;
+ }
+
+ info->read_ts = false;
+ mutex_unlock(&indio_dev->mlock);
+
+ return ret;
+}
+
static irqreturn_t exynos_adc_isr(int irq, void *dev_id)
{
struct exynos_adc *info = (struct exynos_adc *)dev_id;
u32 mask = info->data->mask;
/* Read value */
- info->value = readl(ADC_V1_DATX(info->regs)) & mask;
+ if (info->read_ts) {
+ info->ts_x = readl(ADC_V1_DATX(info->regs));
+ info->ts_y = readl(ADC_V1_DATY(info->regs));
+ writel(ADC_TSC_WAIT4INT | ADC_S3C2443_TSC_UD_SEN, ADC_V1_TSC(info->regs));
+ } else {
+ info->value = readl(ADC_V1_DATX(info->regs)) & mask;
+ }
/* clear irq */
if (info->data->clear_irq)
@@ -515,6 +600,46 @@ static irqreturn_t exynos_adc_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
+/*
+ * Here we (ab)use a threaded interrupt handler to stay running
+ * for as long as the touchscreen remains pressed, we report
+ * a new event with the latest data and then sleep until the
+ * next timer tick. This mirrors the behavior of the old
+ * driver, with much less code.
+ */
+static irqreturn_t exynos_ts_isr(int irq, void *dev_id)
+{
+ struct exynos_adc *info = dev_id;
+ struct iio_dev *dev = dev_get_drvdata(info->dev);
+ u32 x, y;
+ bool pressed;
+ int ret;
+
+ while (info->input->users) {
+ ret = exynos_read_s3c64xx_ts(dev, &x, &y);
+ if (ret == -ETIMEDOUT)
+ break;
+
+ pressed = x & y & ADC_DATX_PRESSED;
+ if (!pressed) {
+ input_report_key(info->input, BTN_TOUCH, 0);
+ input_sync(info->input);
+ break;
+ }
+
+ input_report_abs(info->input, ABS_X, x & ADC_DATX_MASK);
+ input_report_abs(info->input, ABS_Y, y & ADC_DATY_MASK);
+ input_report_key(info->input, BTN_TOUCH, 1);
+ input_sync(info->input);
+
+ msleep(1);
+ };
+
+ writel(0, ADC_V1_CLRINTPNDNUP(info->regs));
+
+ return IRQ_HANDLED;
+}
+
static int exynos_adc_reg_access(struct iio_dev *indio_dev,
unsigned reg, unsigned writeval,
unsigned *readval)
@@ -566,18 +691,72 @@ static int exynos_adc_remove_devices(struct device *dev, void *c)
return 0;
}
+static int exynos_adc_ts_open(struct input_dev *dev)
+{
+ struct exynos_adc *info = input_get_drvdata(dev);
+
+ enable_irq(info->tsirq);
+
+ return 0;
+}
+
+static void exynos_adc_ts_close(struct input_dev *dev)
+{
+ struct exynos_adc *info = input_get_drvdata(dev);
+
+ disable_irq(info->tsirq);
+}
+
+static int exynos_adc_ts_init(struct exynos_adc *info)
+{
+ int ret;
+
+ if (info->tsirq <= 0)
+ return -ENODEV;
+
+ info->input = input_allocate_device();
+ if (!info->input)
+ return -ENOMEM;
+
+ info->input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ info->input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+ input_set_abs_params(info->input, ABS_X, 0, 0x3FF, 0, 0);
+ input_set_abs_params(info->input, ABS_Y, 0, 0x3FF, 0, 0);
+
+ info->input->name = "S3C24xx TouchScreen";
+ info->input->id.bustype = BUS_HOST;
+ info->input->open = exynos_adc_ts_open;
+ info->input->close = exynos_adc_ts_close;
+
+ input_set_drvdata(info->input, info);
+
+ ret = input_register_device(info->input);
+ if (ret) {
+ input_free_device(info->input);
+ return ret;
+ }
+
+ disable_irq(info->tsirq);
+ ret = request_threaded_irq(info->tsirq, NULL, exynos_ts_isr,
+ 0, "touchscreen", info);
+ if (ret)
+ input_unregister_device(info->input);
+
+ return ret;
+}
+
static int exynos_adc_probe(struct platform_device *pdev)
{
struct exynos_adc *info = NULL;
struct device_node *np = pdev->dev.of_node;
+ struct s3c2410_ts_mach_info *pdata = dev_get_platdata(&pdev->dev);
struct iio_dev *indio_dev = NULL;
struct resource *mem;
+ bool has_ts = false;
int ret = -ENODEV;
int irq;
- if (!np)
- return ret;
-
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct exynos_adc));
if (!indio_dev) {
dev_err(&pdev->dev, "failed allocating iio device\n");
@@ -613,8 +792,14 @@ static int exynos_adc_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "no irq resource?\n");
return irq;
}
-
info->irq = irq;
+
+ irq = platform_get_irq(pdev, 1);
+ if (irq == -EPROBE_DEFER)
+ return irq;
+
+ info->tsirq = irq;
+
info->dev = &pdev->dev;
init_completion(&info->completion);
@@ -680,6 +865,22 @@ static int exynos_adc_probe(struct platform_device *pdev)
if (info->data->init_hw)
info->data->init_hw(info);
+ /* leave out any TS related code if unreachable */
+ if (IS_REACHABLE(CONFIG_INPUT)) {
+ has_ts = of_property_read_bool(pdev->dev.of_node,
+ "has-touchscreen") || pdata;
+ }
+
+ if (pdata)
+ info->delay = pdata->delay;
+ else
+ info->delay = 10000;
+
+ if (has_ts)
+ ret = exynos_adc_ts_init(info);
+ if (ret)
+ goto err_iio;
+
ret = of_platform_populate(np, exynos_adc_match, NULL, &indio_dev->dev);
if (ret < 0) {
dev_err(&pdev->dev, "failed adding child nodes\n");
@@ -691,6 +892,11 @@ static int exynos_adc_probe(struct platform_device *pdev)
err_of_populate:
device_for_each_child(&indio_dev->dev, NULL,
exynos_adc_remove_devices);
+ if (has_ts) {
+ input_unregister_device(info->input);
+ free_irq(info->tsirq, info);
+ }
+err_iio:
iio_device_unregister(indio_dev);
err_irq:
free_irq(info->irq, info);
@@ -710,6 +916,10 @@ static int exynos_adc_remove(struct platform_device *pdev)
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct exynos_adc *info = iio_priv(indio_dev);
+ if (IS_REACHABLE(CONFIG_INPUT)) {
+ free_irq(info->tsirq, info);
+ input_unregister_device(info->input);
+ }
device_for_each_child(&indio_dev->dev, NULL,
exynos_adc_remove_devices);
iio_device_unregister(indio_dev);
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH 07/10] ARM: s3c64xx: use new adc/touchscreen driver
2015-11-25 16:06 ` Arnd Bergmann
(?)
@ 2015-11-25 16:06 ` Arnd Bergmann
-1 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-11-25 16:06 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, Kukjin Kim, Krzysztof Kozlowski, Mark Brown,
Vasily Khoruzhick, Charles Keepax, Tomasz Figa, Ben Dooks,
linux-samsung-soc, Arnd Bergmann
The old ADC and touchscreen drivers are not compatible with
multiplatform support, but we can use the exynos-adc driver
as a replacement.
This changes the common device creation functions for s3c64xx
(but not s3c24xx for now) to use the new driver. To do this,
we have to pass the interrupt resources in the opposite order
and pass the platform data in the adc device node.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-s3c64xx/mach-mini6410.c | 3 +--
arch/arm/mach-s3c64xx/mach-real6410.c | 3 +--
arch/arm/mach-s3c64xx/mach-smartq.c | 3 +--
arch/arm/mach-s3c64xx/mach-smdk6410.c | 3 +--
arch/arm/plat-samsung/devs.c | 22 +++++-----------------
include/linux/platform_data/touchscreen-s3c2410.h | 1 +
6 files changed, 10 insertions(+), 25 deletions(-)
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 3ce5842ed51b..ae999fb3fe6d 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -234,7 +234,6 @@ static struct platform_device *mini6410_devices[] __initdata = {
&s3c_device_fb,
&mini6410_lcd_powerdev,
&s3c_device_adc,
- &s3c_device_ts,
};
static void __init mini6410_map_io(void)
@@ -333,7 +332,7 @@ static void __init mini6410_machine_init(void)
s3c_nand_set_platdata(&mini6410_nand_info);
s3c_fb_set_platdata(&mini6410_lcd_pdata[features.lcd_index]);
s3c_sdhci1_set_platdata(&mini6410_hsmmc1_pdata);
- s3c24xx_ts_set_platdata(NULL);
+ s3c64xx_ts_set_platdata(NULL);
/* configure nCS1 width to 16 bits */
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index ca6548a1ed3b..4e240ffa7ac7 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -203,7 +203,6 @@ static struct platform_device *real6410_devices[] __initdata = {
&s3c_device_fb,
&s3c_device_nand,
&s3c_device_adc,
- &s3c_device_ts,
&s3c_device_ohci,
};
@@ -302,7 +301,7 @@ static void __init real6410_machine_init(void)
s3c_fb_set_platdata(&real6410_lcd_pdata[features.lcd_index]);
s3c_nand_set_platdata(&real6410_nand_info);
- s3c24xx_ts_set_platdata(NULL);
+ s3c64xx_ts_set_platdata(NULL);
/* configure nCS1 width to 16 bits */
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index 96784e7f894a..936a63fc68d5 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -253,7 +253,6 @@ static struct platform_device *smartq_devices[] __initdata = {
&s3c_device_ohci,
&s3c_device_rtc,
&samsung_device_pwm,
- &s3c_device_ts,
&s3c_device_usb_hsotg,
&s3c64xx_device_iis0,
&smartq_backlight_device,
@@ -400,7 +399,7 @@ void __init smartq_machine_init(void)
s3c_hwmon_set_platdata(&smartq_hwmon_pdata);
s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata);
s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);
- s3c24xx_ts_set_platdata(&smartq_touchscreen_pdata);
+ s3c64xx_ts_set_platdata(&smartq_touchscreen_pdata);
i2c_register_board_info(0, smartq_i2c_devs,
ARRAY_SIZE(smartq_i2c_devs));
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 34d31bd48954..8a894ee3ee76 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -290,7 +290,6 @@ static struct platform_device *smdk6410_devices[] __initdata = {
&s3c_device_adc,
&s3c_device_cfcon,
&s3c_device_rtc,
- &s3c_device_ts,
&s3c_device_wdt,
};
@@ -669,7 +668,7 @@ static void __init smdk6410_machine_init(void)
samsung_keypad_set_platdata(&smdk6410_keypad_data);
- s3c24xx_ts_set_platdata(NULL);
+ s3c64xx_ts_set_platdata(NULL);
/* configure nCS1 width to 16 bits */
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index f39938fa9ef6..b53d4ff3befb 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -119,12 +119,12 @@ struct platform_device s3c_device_adc = {
#if defined(CONFIG_SAMSUNG_DEV_ADC)
static struct resource s3c_adc_resource[] = {
[0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256),
- [1] = DEFINE_RES_IRQ(IRQ_TC),
- [2] = DEFINE_RES_IRQ(IRQ_ADC),
+ [1] = DEFINE_RES_IRQ(IRQ_ADC),
+ [2] = DEFINE_RES_IRQ(IRQ_TC),
};
struct platform_device s3c_device_adc = {
- .name = "samsung-adc",
+ .name = "exynos-adc",
.id = -1,
.num_resources = ARRAY_SIZE(s3c_adc_resource),
.resource = s3c_adc_resource,
@@ -956,31 +956,19 @@ void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_
#endif /* CONFIG_PLAT_S3C24XX */
#ifdef CONFIG_SAMSUNG_DEV_TS
-static struct resource s3c_ts_resource[] = {
- [0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256),
- [1] = DEFINE_RES_IRQ(IRQ_TC),
-};
-
static struct s3c2410_ts_mach_info default_ts_data __initdata = {
.delay = 10000,
.presc = 49,
.oversampling_shift = 2,
};
-struct platform_device s3c_device_ts = {
- .name = "s3c64xx-ts",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_ts_resource),
- .resource = s3c_ts_resource,
-};
-
-void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
+void __init s3c64xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
{
if (!pd)
pd = &default_ts_data;
s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info),
- &s3c_device_ts);
+ &s3c_device_adc);
}
#endif /* CONFIG_SAMSUNG_DEV_TS */
diff --git a/include/linux/platform_data/touchscreen-s3c2410.h b/include/linux/platform_data/touchscreen-s3c2410.h
index 58dc7c5ae63b..71eccaa9835d 100644
--- a/include/linux/platform_data/touchscreen-s3c2410.h
+++ b/include/linux/platform_data/touchscreen-s3c2410.h
@@ -17,6 +17,7 @@ struct s3c2410_ts_mach_info {
};
extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *);
+extern void s3c64xx_ts_set_platdata(struct s3c2410_ts_mach_info *);
/* defined by architecture to configure gpio */
extern void s3c24xx_ts_cfg_gpio(struct platform_device *dev);
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH 07/10] ARM: s3c64xx: use new adc/touchscreen driver
@ 2015-11-25 16:06 ` Arnd Bergmann
0 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-11-25 16:06 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Krzysztof Kozlowski, linux-samsung-soc, Arnd Bergmann,
Mark Brown, linux-kernel, Tomasz Figa, Vasily Khoruzhick,
Kukjin Kim, Charles Keepax, Ben Dooks
The old ADC and touchscreen drivers are not compatible with
multiplatform support, but we can use the exynos-adc driver
as a replacement.
This changes the common device creation functions for s3c64xx
(but not s3c24xx for now) to use the new driver. To do this,
we have to pass the interrupt resources in the opposite order
and pass the platform data in the adc device node.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-s3c64xx/mach-mini6410.c | 3 +--
arch/arm/mach-s3c64xx/mach-real6410.c | 3 +--
arch/arm/mach-s3c64xx/mach-smartq.c | 3 +--
arch/arm/mach-s3c64xx/mach-smdk6410.c | 3 +--
arch/arm/plat-samsung/devs.c | 22 +++++-----------------
include/linux/platform_data/touchscreen-s3c2410.h | 1 +
6 files changed, 10 insertions(+), 25 deletions(-)
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 3ce5842ed51b..ae999fb3fe6d 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -234,7 +234,6 @@ static struct platform_device *mini6410_devices[] __initdata = {
&s3c_device_fb,
&mini6410_lcd_powerdev,
&s3c_device_adc,
- &s3c_device_ts,
};
static void __init mini6410_map_io(void)
@@ -333,7 +332,7 @@ static void __init mini6410_machine_init(void)
s3c_nand_set_platdata(&mini6410_nand_info);
s3c_fb_set_platdata(&mini6410_lcd_pdata[features.lcd_index]);
s3c_sdhci1_set_platdata(&mini6410_hsmmc1_pdata);
- s3c24xx_ts_set_platdata(NULL);
+ s3c64xx_ts_set_platdata(NULL);
/* configure nCS1 width to 16 bits */
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index ca6548a1ed3b..4e240ffa7ac7 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -203,7 +203,6 @@ static struct platform_device *real6410_devices[] __initdata = {
&s3c_device_fb,
&s3c_device_nand,
&s3c_device_adc,
- &s3c_device_ts,
&s3c_device_ohci,
};
@@ -302,7 +301,7 @@ static void __init real6410_machine_init(void)
s3c_fb_set_platdata(&real6410_lcd_pdata[features.lcd_index]);
s3c_nand_set_platdata(&real6410_nand_info);
- s3c24xx_ts_set_platdata(NULL);
+ s3c64xx_ts_set_platdata(NULL);
/* configure nCS1 width to 16 bits */
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index 96784e7f894a..936a63fc68d5 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -253,7 +253,6 @@ static struct platform_device *smartq_devices[] __initdata = {
&s3c_device_ohci,
&s3c_device_rtc,
&samsung_device_pwm,
- &s3c_device_ts,
&s3c_device_usb_hsotg,
&s3c64xx_device_iis0,
&smartq_backlight_device,
@@ -400,7 +399,7 @@ void __init smartq_machine_init(void)
s3c_hwmon_set_platdata(&smartq_hwmon_pdata);
s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata);
s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);
- s3c24xx_ts_set_platdata(&smartq_touchscreen_pdata);
+ s3c64xx_ts_set_platdata(&smartq_touchscreen_pdata);
i2c_register_board_info(0, smartq_i2c_devs,
ARRAY_SIZE(smartq_i2c_devs));
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 34d31bd48954..8a894ee3ee76 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -290,7 +290,6 @@ static struct platform_device *smdk6410_devices[] __initdata = {
&s3c_device_adc,
&s3c_device_cfcon,
&s3c_device_rtc,
- &s3c_device_ts,
&s3c_device_wdt,
};
@@ -669,7 +668,7 @@ static void __init smdk6410_machine_init(void)
samsung_keypad_set_platdata(&smdk6410_keypad_data);
- s3c24xx_ts_set_platdata(NULL);
+ s3c64xx_ts_set_platdata(NULL);
/* configure nCS1 width to 16 bits */
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index f39938fa9ef6..b53d4ff3befb 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -119,12 +119,12 @@ struct platform_device s3c_device_adc = {
#if defined(CONFIG_SAMSUNG_DEV_ADC)
static struct resource s3c_adc_resource[] = {
[0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256),
- [1] = DEFINE_RES_IRQ(IRQ_TC),
- [2] = DEFINE_RES_IRQ(IRQ_ADC),
+ [1] = DEFINE_RES_IRQ(IRQ_ADC),
+ [2] = DEFINE_RES_IRQ(IRQ_TC),
};
struct platform_device s3c_device_adc = {
- .name = "samsung-adc",
+ .name = "exynos-adc",
.id = -1,
.num_resources = ARRAY_SIZE(s3c_adc_resource),
.resource = s3c_adc_resource,
@@ -956,31 +956,19 @@ void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_
#endif /* CONFIG_PLAT_S3C24XX */
#ifdef CONFIG_SAMSUNG_DEV_TS
-static struct resource s3c_ts_resource[] = {
- [0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256),
- [1] = DEFINE_RES_IRQ(IRQ_TC),
-};
-
static struct s3c2410_ts_mach_info default_ts_data __initdata = {
.delay = 10000,
.presc = 49,
.oversampling_shift = 2,
};
-struct platform_device s3c_device_ts = {
- .name = "s3c64xx-ts",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_ts_resource),
- .resource = s3c_ts_resource,
-};
-
-void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
+void __init s3c64xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
{
if (!pd)
pd = &default_ts_data;
s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info),
- &s3c_device_ts);
+ &s3c_device_adc);
}
#endif /* CONFIG_SAMSUNG_DEV_TS */
diff --git a/include/linux/platform_data/touchscreen-s3c2410.h b/include/linux/platform_data/touchscreen-s3c2410.h
index 58dc7c5ae63b..71eccaa9835d 100644
--- a/include/linux/platform_data/touchscreen-s3c2410.h
+++ b/include/linux/platform_data/touchscreen-s3c2410.h
@@ -17,6 +17,7 @@ struct s3c2410_ts_mach_info {
};
extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *);
+extern void s3c64xx_ts_set_platdata(struct s3c2410_ts_mach_info *);
/* defined by architecture to configure gpio */
extern void s3c24xx_ts_cfg_gpio(struct platform_device *dev);
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH 07/10] ARM: s3c64xx: use new adc/touchscreen driver
@ 2015-11-25 16:06 ` Arnd Bergmann
0 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-11-25 16:06 UTC (permalink / raw)
To: linux-arm-kernel
The old ADC and touchscreen drivers are not compatible with
multiplatform support, but we can use the exynos-adc driver
as a replacement.
This changes the common device creation functions for s3c64xx
(but not s3c24xx for now) to use the new driver. To do this,
we have to pass the interrupt resources in the opposite order
and pass the platform data in the adc device node.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-s3c64xx/mach-mini6410.c | 3 +--
arch/arm/mach-s3c64xx/mach-real6410.c | 3 +--
arch/arm/mach-s3c64xx/mach-smartq.c | 3 +--
arch/arm/mach-s3c64xx/mach-smdk6410.c | 3 +--
arch/arm/plat-samsung/devs.c | 22 +++++-----------------
include/linux/platform_data/touchscreen-s3c2410.h | 1 +
6 files changed, 10 insertions(+), 25 deletions(-)
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 3ce5842ed51b..ae999fb3fe6d 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -234,7 +234,6 @@ static struct platform_device *mini6410_devices[] __initdata = {
&s3c_device_fb,
&mini6410_lcd_powerdev,
&s3c_device_adc,
- &s3c_device_ts,
};
static void __init mini6410_map_io(void)
@@ -333,7 +332,7 @@ static void __init mini6410_machine_init(void)
s3c_nand_set_platdata(&mini6410_nand_info);
s3c_fb_set_platdata(&mini6410_lcd_pdata[features.lcd_index]);
s3c_sdhci1_set_platdata(&mini6410_hsmmc1_pdata);
- s3c24xx_ts_set_platdata(NULL);
+ s3c64xx_ts_set_platdata(NULL);
/* configure nCS1 width to 16 bits */
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index ca6548a1ed3b..4e240ffa7ac7 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -203,7 +203,6 @@ static struct platform_device *real6410_devices[] __initdata = {
&s3c_device_fb,
&s3c_device_nand,
&s3c_device_adc,
- &s3c_device_ts,
&s3c_device_ohci,
};
@@ -302,7 +301,7 @@ static void __init real6410_machine_init(void)
s3c_fb_set_platdata(&real6410_lcd_pdata[features.lcd_index]);
s3c_nand_set_platdata(&real6410_nand_info);
- s3c24xx_ts_set_platdata(NULL);
+ s3c64xx_ts_set_platdata(NULL);
/* configure nCS1 width to 16 bits */
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index 96784e7f894a..936a63fc68d5 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -253,7 +253,6 @@ static struct platform_device *smartq_devices[] __initdata = {
&s3c_device_ohci,
&s3c_device_rtc,
&samsung_device_pwm,
- &s3c_device_ts,
&s3c_device_usb_hsotg,
&s3c64xx_device_iis0,
&smartq_backlight_device,
@@ -400,7 +399,7 @@ void __init smartq_machine_init(void)
s3c_hwmon_set_platdata(&smartq_hwmon_pdata);
s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata);
s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);
- s3c24xx_ts_set_platdata(&smartq_touchscreen_pdata);
+ s3c64xx_ts_set_platdata(&smartq_touchscreen_pdata);
i2c_register_board_info(0, smartq_i2c_devs,
ARRAY_SIZE(smartq_i2c_devs));
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 34d31bd48954..8a894ee3ee76 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -290,7 +290,6 @@ static struct platform_device *smdk6410_devices[] __initdata = {
&s3c_device_adc,
&s3c_device_cfcon,
&s3c_device_rtc,
- &s3c_device_ts,
&s3c_device_wdt,
};
@@ -669,7 +668,7 @@ static void __init smdk6410_machine_init(void)
samsung_keypad_set_platdata(&smdk6410_keypad_data);
- s3c24xx_ts_set_platdata(NULL);
+ s3c64xx_ts_set_platdata(NULL);
/* configure nCS1 width to 16 bits */
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index f39938fa9ef6..b53d4ff3befb 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -119,12 +119,12 @@ struct platform_device s3c_device_adc = {
#if defined(CONFIG_SAMSUNG_DEV_ADC)
static struct resource s3c_adc_resource[] = {
[0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256),
- [1] = DEFINE_RES_IRQ(IRQ_TC),
- [2] = DEFINE_RES_IRQ(IRQ_ADC),
+ [1] = DEFINE_RES_IRQ(IRQ_ADC),
+ [2] = DEFINE_RES_IRQ(IRQ_TC),
};
struct platform_device s3c_device_adc = {
- .name = "samsung-adc",
+ .name = "exynos-adc",
.id = -1,
.num_resources = ARRAY_SIZE(s3c_adc_resource),
.resource = s3c_adc_resource,
@@ -956,31 +956,19 @@ void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_
#endif /* CONFIG_PLAT_S3C24XX */
#ifdef CONFIG_SAMSUNG_DEV_TS
-static struct resource s3c_ts_resource[] = {
- [0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256),
- [1] = DEFINE_RES_IRQ(IRQ_TC),
-};
-
static struct s3c2410_ts_mach_info default_ts_data __initdata = {
.delay = 10000,
.presc = 49,
.oversampling_shift = 2,
};
-struct platform_device s3c_device_ts = {
- .name = "s3c64xx-ts",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_ts_resource),
- .resource = s3c_ts_resource,
-};
-
-void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
+void __init s3c64xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
{
if (!pd)
pd = &default_ts_data;
s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info),
- &s3c_device_ts);
+ &s3c_device_adc);
}
#endif /* CONFIG_SAMSUNG_DEV_TS */
diff --git a/include/linux/platform_data/touchscreen-s3c2410.h b/include/linux/platform_data/touchscreen-s3c2410.h
index 58dc7c5ae63b..71eccaa9835d 100644
--- a/include/linux/platform_data/touchscreen-s3c2410.h
+++ b/include/linux/platform_data/touchscreen-s3c2410.h
@@ -17,6 +17,7 @@ struct s3c2410_ts_mach_info {
};
extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *);
+extern void s3c64xx_ts_set_platdata(struct s3c2410_ts_mach_info *);
/* defined by architecture to configure gpio */
extern void s3c24xx_ts_cfg_gpio(struct platform_device *dev);
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH 08/10] ARM: s3c64xx: use common debug-ll implementation
2015-11-25 16:06 ` Arnd Bergmann
@ 2015-11-25 16:06 ` Arnd Bergmann
-1 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-11-25 16:06 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, Kukjin Kim, Krzysztof Kozlowski, Mark Brown,
Vasily Khoruzhick, Charles Keepax, Tomasz Figa, Ben Dooks,
linux-samsung-soc, Arnd Bergmann
The uart on s3c64xx is essentially the same as on s3c24xx,
so we can share a single assembler file. However, the addresses
are different, and we need to add the respective Kconfig magic
to get the right addresses.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/Kconfig.debug | 19 +++++++++++-
arch/arm/mach-s3c64xx/include/mach/debug-macro.S | 38 ------------------------
2 files changed, 18 insertions(+), 39 deletions(-)
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/debug-macro.S
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 259c0ca9c99a..17ca2b5f8be7 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -857,6 +857,7 @@ choice
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+ select DEBUG_S3C64XX_UART if ARCH_S3C64XX
select DEBUG_S5PV210_UART if ARCH_S5PV210
bool "Use Samsung S3C UART 0 for low-level debug"
help
@@ -868,6 +869,7 @@ choice
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+ select DEBUG_S3C64XX_UART if ARCH_S3C64XX
select DEBUG_S5PV210_UART if ARCH_S5PV210
bool "Use Samsung S3C UART 1 for low-level debug"
help
@@ -879,6 +881,7 @@ choice
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+ select DEBUG_S3C64XX_UART if ARCH_S3C64XX
select DEBUG_S5PV210_UART if ARCH_S5PV210
bool "Use Samsung S3C UART 2 for low-level debug"
help
@@ -889,6 +892,7 @@ choice
config DEBUG_S3C_UART3
depends on PLAT_SAMSUNG && (ARCH_EXYNOS || ARCH_S5PV210)
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+ select DEBUG_S3C64XX_UART if ARCH_S3C64XX
select DEBUG_S5PV210_UART if ARCH_S5PV210
bool "Use Samsung S3C UART 3 for low-level debug"
help
@@ -1253,6 +1257,9 @@ config DEBUG_S3C2410_UART
config DEBUG_S3C24XX_UART
bool
+config DEBUG_S3C64XX_UART
+ bool
+
config DEBUG_S5PV210_UART
bool
@@ -1338,7 +1345,7 @@ config DEBUG_LL_INCLUDE
default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0
default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1
default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
- default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART
+ default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART
default "debug/s5pv210.S" if DEBUG_S5PV210_UART
default "debug/sirf.S" if DEBUG_SIRFSOC_UART
default "debug/sti.S" if DEBUG_STI_UART
@@ -1416,6 +1423,10 @@ config DEBUG_UART_PHYS
DEBUG_S3C2410_UART2)
default 0x78000000 if DEBUG_CNS3XXX
default 0x7c0003f8 if FOOTBRIDGE
+ default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
+ default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
+ default 0x7f005800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2
+ default 0x7f005c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3
default 0x80010000 if DEBUG_ASM9260_UART
default 0x80070000 if DEBUG_IMX23_UART
default 0x80074000 if DEBUG_IMX28_UART
@@ -1474,6 +1485,7 @@ config DEBUG_UART_PHYS
DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
+ DEBUG_S3C64XX_UART || \
DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
DEBUG_AT91_UART
@@ -1499,8 +1511,12 @@ config DEBUG_UART_VIRT
default 0xf4090000 if ARCH_LPC32XX
default 0xf4200000 if ARCH_GEMINI
default 0xf7000000 if DEBUG_SUN9I_UART0
+ default 0xf7000000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
DEBUG_S3C2410_UART0)
+ default 0xf7000400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
+ default 0xf7000800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2
+ default 0xf7000c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3
default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
DEBUG_S3C2410_UART1)
default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
@@ -1566,6 +1582,7 @@ config DEBUG_UART_VIRT
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
DEBUG_NETX_UART || \
DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
+ DEBUG_S3C64XX_UART || \
DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
deleted file mode 100644
index c9b95325b672..000000000000
--- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/* arch/arm/mach-s3c6400/include/mach/debug-macro.S
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* pull in the relevant register and map files. */
-
-#include <linux/serial_s3c.h>
-#include <mach/map.h>
-
- /* note, for the boot process to work we have to keep the UART
- * virtual address aligned to an 1MiB boundary for the L1
- * mapping the head code makes. We keep the UART virtual address
- * aligned and add in the offset when we load the value here.
- */
-
- .macro addruart, rp, rv, tmp
- ldr \rp, = S3C_PA_UART
- ldr \rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
-#if CONFIG_DEBUG_S3C_UART != 0
- add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
- add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
-#endif
- .endm
-
-/* include the reset of the code which will do the work, we're only
- * compiling for a single cpu processor type so the default of s3c2440
- * will be fine with us.
- */
-
-#include <debug/samsung.S>
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH 08/10] ARM: s3c64xx: use common debug-ll implementation
@ 2015-11-25 16:06 ` Arnd Bergmann
0 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-11-25 16:06 UTC (permalink / raw)
To: linux-arm-kernel
The uart on s3c64xx is essentially the same as on s3c24xx,
so we can share a single assembler file. However, the addresses
are different, and we need to add the respective Kconfig magic
to get the right addresses.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/Kconfig.debug | 19 +++++++++++-
arch/arm/mach-s3c64xx/include/mach/debug-macro.S | 38 ------------------------
2 files changed, 18 insertions(+), 39 deletions(-)
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/debug-macro.S
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 259c0ca9c99a..17ca2b5f8be7 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -857,6 +857,7 @@ choice
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+ select DEBUG_S3C64XX_UART if ARCH_S3C64XX
select DEBUG_S5PV210_UART if ARCH_S5PV210
bool "Use Samsung S3C UART 0 for low-level debug"
help
@@ -868,6 +869,7 @@ choice
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+ select DEBUG_S3C64XX_UART if ARCH_S3C64XX
select DEBUG_S5PV210_UART if ARCH_S5PV210
bool "Use Samsung S3C UART 1 for low-level debug"
help
@@ -879,6 +881,7 @@ choice
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+ select DEBUG_S3C64XX_UART if ARCH_S3C64XX
select DEBUG_S5PV210_UART if ARCH_S5PV210
bool "Use Samsung S3C UART 2 for low-level debug"
help
@@ -889,6 +892,7 @@ choice
config DEBUG_S3C_UART3
depends on PLAT_SAMSUNG && (ARCH_EXYNOS || ARCH_S5PV210)
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+ select DEBUG_S3C64XX_UART if ARCH_S3C64XX
select DEBUG_S5PV210_UART if ARCH_S5PV210
bool "Use Samsung S3C UART 3 for low-level debug"
help
@@ -1253,6 +1257,9 @@ config DEBUG_S3C2410_UART
config DEBUG_S3C24XX_UART
bool
+config DEBUG_S3C64XX_UART
+ bool
+
config DEBUG_S5PV210_UART
bool
@@ -1338,7 +1345,7 @@ config DEBUG_LL_INCLUDE
default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0
default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1
default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
- default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART
+ default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART
default "debug/s5pv210.S" if DEBUG_S5PV210_UART
default "debug/sirf.S" if DEBUG_SIRFSOC_UART
default "debug/sti.S" if DEBUG_STI_UART
@@ -1416,6 +1423,10 @@ config DEBUG_UART_PHYS
DEBUG_S3C2410_UART2)
default 0x78000000 if DEBUG_CNS3XXX
default 0x7c0003f8 if FOOTBRIDGE
+ default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
+ default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
+ default 0x7f005800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2
+ default 0x7f005c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3
default 0x80010000 if DEBUG_ASM9260_UART
default 0x80070000 if DEBUG_IMX23_UART
default 0x80074000 if DEBUG_IMX28_UART
@@ -1474,6 +1485,7 @@ config DEBUG_UART_PHYS
DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
+ DEBUG_S3C64XX_UART || \
DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
DEBUG_AT91_UART
@@ -1499,8 +1511,12 @@ config DEBUG_UART_VIRT
default 0xf4090000 if ARCH_LPC32XX
default 0xf4200000 if ARCH_GEMINI
default 0xf7000000 if DEBUG_SUN9I_UART0
+ default 0xf7000000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
DEBUG_S3C2410_UART0)
+ default 0xf7000400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
+ default 0xf7000800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2
+ default 0xf7000c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3
default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
DEBUG_S3C2410_UART1)
default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
@@ -1566,6 +1582,7 @@ config DEBUG_UART_VIRT
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
DEBUG_NETX_UART || \
DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
+ DEBUG_S3C64XX_UART || \
DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
deleted file mode 100644
index c9b95325b672..000000000000
--- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/* arch/arm/mach-s3c6400/include/mach/debug-macro.S
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* pull in the relevant register and map files. */
-
-#include <linux/serial_s3c.h>
-#include <mach/map.h>
-
- /* note, for the boot process to work we have to keep the UART
- * virtual address aligned to an 1MiB boundary for the L1
- * mapping the head code makes. We keep the UART virtual address
- * aligned and add in the offset when we load the value here.
- */
-
- .macro addruart, rp, rv, tmp
- ldr \rp, = S3C_PA_UART
- ldr \rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
-#if CONFIG_DEBUG_S3C_UART != 0
- add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
- add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
-#endif
- .endm
-
-/* include the reset of the code which will do the work, we're only
- * compiling for a single cpu processor type so the default of s3c2440
- * will be fine with us.
- */
-
-#include <debug/samsung.S>
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH 09/10] ARM: s3c64xx: multiplatform support
2015-11-25 16:06 ` Arnd Bergmann
@ 2015-11-25 16:06 ` Arnd Bergmann
-1 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-11-25 16:06 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, Kukjin Kim, Krzysztof Kozlowski, Mark Brown,
Vasily Khoruzhick, Charles Keepax, Tomasz Figa, Ben Dooks,
linux-samsung-soc, Arnd Bergmann
After all preparation work is done, we can finally move the Kconfig
option for s3c64xx into ARCH_MULTIPLATFORM. This implies allowing
SAMSUNG_ATAGS for multiplatform again, but now disallowing the
ADC driver below it, as that still has dependencies on header files.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/Kconfig | 27 ---------------------------
arch/arm/configs/multi_v7_defconfig | 3 +++
arch/arm/configs/s3c6400_defconfig | 2 ++
arch/arm/mach-s3c64xx/Kconfig | 22 +++++++++++++++++++++-
arch/arm/mach-s3c64xx/Makefile | 3 +++
arch/arm/plat-samsung/Kconfig | 2 +-
arch/arm/plat-samsung/Makefile | 3 ++-
7 files changed, 32 insertions(+), 30 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1ec6a153d8e5..f08306499a82 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -626,33 +626,6 @@ config ARCH_S3C24XX
(<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
Samsung SMDK2410 development board (and derivatives).
-config ARCH_S3C64XX
- bool "Samsung S3C64XX"
- select ARCH_REQUIRE_GPIOLIB
- select ARM_AMBA
- select ARM_VIC
- select ATAGS
- select CLKDEV_LOOKUP
- select CLKSRC_SAMSUNG_PWM
- select COMMON_CLK_SAMSUNG
- select CPU_V6K
- select GENERIC_CLOCKEVENTS
- select GPIO_SAMSUNG
- select HAVE_S3C2410_I2C if I2C
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
- select HAVE_TCM
- select NO_IOPORT_MAP
- select PLAT_SAMSUNG
- select PM_GENERIC_DOMAINS if PM
- select S3C_DEV_NAND
- select S3C_GPIO_TRACK
- select SAMSUNG_ATAGS
- select SAMSUNG_WAKEMASK
- select SAMSUNG_WDT_RESET
- select SPARSE_IRQ
- help
- Samsung S3C64XX series based systems
-
config ARCH_DAVINCI
bool "TI DaVinci"
select ARCH_HAS_HOLES_MEMORYMODEL
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index c8953e102a7c..44f0f2a8124d 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -11,6 +11,9 @@ CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_CMDLINE_PARTITION=y
+CONFIG_ARCH_MULTI_V7=y
+# CONFIG_ARCH_MULTI_V5 is not set
+# CONFIG_ARCH_MULTI_V4 is not set
CONFIG_ARCH_VIRT=y
CONFIG_ARCH_ALPINE=y
CONFIG_ARCH_MVEBU=y
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index e2f9fa5bb54b..e0f66936ae02 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -5,6 +5,8 @@ CONFIG_KALLSYMS_ALL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MULTI_V6=y
+# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_S3C64XX=y
CONFIG_S3C_BOOT_ERROR_RESET=y
CONFIG_MACH_SMDK6400=y
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 28c7097e8506..caf71a99389e 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -2,6 +2,27 @@
# Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
#
# Licensed under GPLv2
+menuconfig ARCH_S3C64XX
+ bool "Samsung S3C64XX" if ARCH_MULTI_V6
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_AMBA
+ select ARM_VIC
+ select ATAGS
+ select CLKSRC_SAMSUNG_PWM
+ select COMMON_CLK_SAMSUNG
+ select GPIO_SAMSUNG
+ select HAVE_S3C2410_I2C if I2C
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select HAVE_TCM
+ select PLAT_SAMSUNG
+ select PM_GENERIC_DOMAINS if PM
+ select S3C_DEV_NAND
+ select S3C_GPIO_TRACK
+ select SAMSUNG_ATAGS
+ select SAMSUNG_WAKEMASK if PM
+ select SAMSUNG_WDT_RESET
+ help
+ Samsung S3C64XX series based systems
if ARCH_S3C64XX
@@ -310,7 +331,6 @@ config MACH_S3C64XX_DT
select CPU_S3C6410
select PINCTRL
select PINCTRL_S3C64XX
- select USE_OF
help
Machine support for Samsung S3C6400/S3C6410 machines with Device Tree
enabled.
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index bb233f342f31..04cdcd40e23c 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -5,6 +5,9 @@
#
# Licensed under GPLv2
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
+asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
+
# Core
obj-y += common.o
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 83697414bfa0..aa78c72fcecd 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -39,7 +39,6 @@ config S3C_LOWLEVEL_UART_PORT
config SAMSUNG_ATAGS
def_bool n
- depends on !ARCH_MULTIPLATFORM
depends on ATAGS
help
This option enables ATAGS based boot support code for
@@ -70,6 +69,7 @@ config S3C_GPIO_TRACK
config S3C_ADC
bool "ADC common driver support"
+ depends on !ARCH_MULTIPLATFORM
help
Core support for the ADC block found in the Samsung SoC systems
for drivers such as the touchscreen and hwmon to use to share
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index aeb19e3288b9..be172efec15c 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -4,7 +4,8 @@
#
# Licensed under GPLv2
-ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include
+ccflags-$(CONFIG_ARCH_S3C64XX) := -I$(srctree)/arch/arm/mach-s3c64xx/include
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include
# Objects we always build independent of SoC choice
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH 09/10] ARM: s3c64xx: multiplatform support
@ 2015-11-25 16:06 ` Arnd Bergmann
0 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-11-25 16:06 UTC (permalink / raw)
To: linux-arm-kernel
After all preparation work is done, we can finally move the Kconfig
option for s3c64xx into ARCH_MULTIPLATFORM. This implies allowing
SAMSUNG_ATAGS for multiplatform again, but now disallowing the
ADC driver below it, as that still has dependencies on header files.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/Kconfig | 27 ---------------------------
arch/arm/configs/multi_v7_defconfig | 3 +++
arch/arm/configs/s3c6400_defconfig | 2 ++
arch/arm/mach-s3c64xx/Kconfig | 22 +++++++++++++++++++++-
arch/arm/mach-s3c64xx/Makefile | 3 +++
arch/arm/plat-samsung/Kconfig | 2 +-
arch/arm/plat-samsung/Makefile | 3 ++-
7 files changed, 32 insertions(+), 30 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1ec6a153d8e5..f08306499a82 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -626,33 +626,6 @@ config ARCH_S3C24XX
(<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
Samsung SMDK2410 development board (and derivatives).
-config ARCH_S3C64XX
- bool "Samsung S3C64XX"
- select ARCH_REQUIRE_GPIOLIB
- select ARM_AMBA
- select ARM_VIC
- select ATAGS
- select CLKDEV_LOOKUP
- select CLKSRC_SAMSUNG_PWM
- select COMMON_CLK_SAMSUNG
- select CPU_V6K
- select GENERIC_CLOCKEVENTS
- select GPIO_SAMSUNG
- select HAVE_S3C2410_I2C if I2C
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
- select HAVE_TCM
- select NO_IOPORT_MAP
- select PLAT_SAMSUNG
- select PM_GENERIC_DOMAINS if PM
- select S3C_DEV_NAND
- select S3C_GPIO_TRACK
- select SAMSUNG_ATAGS
- select SAMSUNG_WAKEMASK
- select SAMSUNG_WDT_RESET
- select SPARSE_IRQ
- help
- Samsung S3C64XX series based systems
-
config ARCH_DAVINCI
bool "TI DaVinci"
select ARCH_HAS_HOLES_MEMORYMODEL
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index c8953e102a7c..44f0f2a8124d 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -11,6 +11,9 @@ CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_CMDLINE_PARTITION=y
+CONFIG_ARCH_MULTI_V7=y
+# CONFIG_ARCH_MULTI_V5 is not set
+# CONFIG_ARCH_MULTI_V4 is not set
CONFIG_ARCH_VIRT=y
CONFIG_ARCH_ALPINE=y
CONFIG_ARCH_MVEBU=y
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index e2f9fa5bb54b..e0f66936ae02 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -5,6 +5,8 @@ CONFIG_KALLSYMS_ALL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MULTI_V6=y
+# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_S3C64XX=y
CONFIG_S3C_BOOT_ERROR_RESET=y
CONFIG_MACH_SMDK6400=y
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 28c7097e8506..caf71a99389e 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -2,6 +2,27 @@
# Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
#
# Licensed under GPLv2
+menuconfig ARCH_S3C64XX
+ bool "Samsung S3C64XX" if ARCH_MULTI_V6
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_AMBA
+ select ARM_VIC
+ select ATAGS
+ select CLKSRC_SAMSUNG_PWM
+ select COMMON_CLK_SAMSUNG
+ select GPIO_SAMSUNG
+ select HAVE_S3C2410_I2C if I2C
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select HAVE_TCM
+ select PLAT_SAMSUNG
+ select PM_GENERIC_DOMAINS if PM
+ select S3C_DEV_NAND
+ select S3C_GPIO_TRACK
+ select SAMSUNG_ATAGS
+ select SAMSUNG_WAKEMASK if PM
+ select SAMSUNG_WDT_RESET
+ help
+ Samsung S3C64XX series based systems
if ARCH_S3C64XX
@@ -310,7 +331,6 @@ config MACH_S3C64XX_DT
select CPU_S3C6410
select PINCTRL
select PINCTRL_S3C64XX
- select USE_OF
help
Machine support for Samsung S3C6400/S3C6410 machines with Device Tree
enabled.
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index bb233f342f31..04cdcd40e23c 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -5,6 +5,9 @@
#
# Licensed under GPLv2
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
+asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
+
# Core
obj-y += common.o
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 83697414bfa0..aa78c72fcecd 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -39,7 +39,6 @@ config S3C_LOWLEVEL_UART_PORT
config SAMSUNG_ATAGS
def_bool n
- depends on !ARCH_MULTIPLATFORM
depends on ATAGS
help
This option enables ATAGS based boot support code for
@@ -70,6 +69,7 @@ config S3C_GPIO_TRACK
config S3C_ADC
bool "ADC common driver support"
+ depends on !ARCH_MULTIPLATFORM
help
Core support for the ADC block found in the Samsung SoC systems
for drivers such as the touchscreen and hwmon to use to share
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index aeb19e3288b9..be172efec15c 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -4,7 +4,8 @@
#
# Licensed under GPLv2
-ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include
+ccflags-$(CONFIG_ARCH_S3C64XX) := -I$(srctree)/arch/arm/mach-s3c64xx/include
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include
# Objects we always build independent of SoC choice
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH 10/10] ARM: s3c64xx: allow building without board support
2015-11-25 16:06 ` Arnd Bergmann
(?)
@ 2015-11-25 16:06 ` Arnd Bergmann
-1 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-11-25 16:06 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, Kukjin Kim, Krzysztof Kozlowski, Mark Brown,
Vasily Khoruzhick, Charles Keepax, Tomasz Figa, Ben Dooks,
linux-samsung-soc, Arnd Bergmann
Most of the code for the s3c64xx platform is only used when booting
with ATAGS based board files, but not when using device-tree.
This tries to identify all the s3c64xx specific code that is
unneeded when CONFIG_ATAGS is not set, so we can build a smaller
DT-only kernel if configured that way.
All board support is still left intact but now depends on the
CONFIG_ATAGS symbol that users may intentionally disable.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-s3c64xx/Kconfig | 19 ++++++++++++++-----
arch/arm/mach-s3c64xx/Makefile | 21 ++++++++++++---------
arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h | 3 +++
arch/arm/plat-samsung/pm.c | 4 ----
4 files changed, 29 insertions(+), 18 deletions(-)
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index caf71a99389e..7c0c420c3016 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -7,18 +7,17 @@ menuconfig ARCH_S3C64XX
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_VIC
- select ATAGS
select CLKSRC_SAMSUNG_PWM
select COMMON_CLK_SAMSUNG
- select GPIO_SAMSUNG
+ select GPIO_SAMSUNG if ATAGS
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_TCM
select PLAT_SAMSUNG
select PM_GENERIC_DOMAINS if PM
- select S3C_DEV_NAND
- select S3C_GPIO_TRACK
- select SAMSUNG_ATAGS
+ select S3C_DEV_NAND if ATAGS
+ select S3C_GPIO_TRACK if ATAGS
+ select SAMSUNG_ATAGS if ATAGS
select SAMSUNG_WAKEMASK if PM
select SAMSUNG_WDT_RESET
help
@@ -111,6 +110,7 @@ config S3C64XX_SETUP_USB_PHY
config MACH_SMDK6400
bool "SMDK6400"
+ depends on ATAGS
select CPU_S3C6400
select S3C64XX_SETUP_SDHCI
select S3C_DEV_HSMMC1
@@ -121,6 +121,7 @@ config MACH_SMDK6400
config MACH_ANW6410
bool "A&W6410"
+ depends on ATAGS
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C_DEV_FB
@@ -129,6 +130,7 @@ config MACH_ANW6410
config MACH_MINI6410
bool "MINI6410"
+ depends on ATAGS
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_SDHCI
@@ -144,6 +146,7 @@ config MACH_MINI6410
config MACH_REAL6410
bool "REAL6410"
+ depends on ATAGS
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_SDHCI
@@ -159,6 +162,7 @@ config MACH_REAL6410
config MACH_SMDK6410
bool "SMDK6410"
+ depends on ATAGS
select CPU_S3C6410
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select S3C64XX_SETUP_FB_24BPP
@@ -246,6 +250,7 @@ config SMDK6410_WM1192_EV1
config MACH_NCP
bool "NCP"
+ depends on ATAGS
select CPU_S3C6410
select S3C64XX_SETUP_I2C1
select S3C_DEV_HSMMC1
@@ -255,6 +260,7 @@ config MACH_NCP
config MACH_HMT
bool "Airgoo HMT"
+ depends on ATAGS
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C_DEV_FB
@@ -286,18 +292,21 @@ config MACH_SMARTQ
config MACH_SMARTQ5
bool "SmartQ 5"
+ depends on ATAGS
select MACH_SMARTQ
help
Machine support for the SmartQ 5
config MACH_SMARTQ7
bool "SmartQ 7"
+ depends on ATAGS
select MACH_SMARTQ
help
Machine support for the SmartQ 7
config MACH_WLF_CRAGG_6410
bool "Wolfson Cragganmore 6410"
+ depends on ATAGS
depends on I2C=y
select CPU_S3C6410
select LEDS_GPIO_REGISTER
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 04cdcd40e23c..256cd5b40c60 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -8,20 +8,21 @@
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
-# Core
+# PM
-obj-y += common.o
+obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_PM_SLEEP) += sleep.o
+obj-$(CONFIG_CPU_IDLE) += cpuidle.o
-# Core support
+ifdef CONFIG_SAMSUNG_ATAGS
-obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
-obj-$(CONFIG_CPU_S3C6410) += s3c6410.o
+obj-$(CONFIG_PM_SLEEP) += irq-pm.o
-# PM
+# Core
-obj-$(CONFIG_PM) += pm.o
-obj-$(CONFIG_PM_SLEEP) += irq-pm.o sleep.o
-obj-$(CONFIG_CPU_IDLE) += cpuidle.o
+obj-y += common.o
+obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
+obj-$(CONFIG_CPU_S3C6410) += s3c6410.o
# DMA support
@@ -58,4 +59,6 @@ obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
+endif
+
obj-$(CONFIG_MACH_S3C64XX_DT) += mach-s3c64xx-dt.o
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h b/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h
index 9c81fac3b2d5..1d3636512e33 100644
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h
@@ -14,6 +14,8 @@
#ifndef GPIO_SAMSUNG_S3C64XX_H
#define GPIO_SAMSUNG_S3C64XX_H
+#ifdef CONFIG_GPIO_SAMSUNG
+
/* GPIO bank sizes */
#define S3C64XX_GPIO_A_NR (8)
#define S3C64XX_GPIO_B_NR (7)
@@ -90,5 +92,6 @@ enum s3c_gpio_number {
/* define the number of gpios we need to the one after the GPQ() range */
#define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+#endif /* GPIO_SAMSUNG */
#endif /* GPIO_SAMSUNG_S3C64XX_H */
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index 82777c649774..d7803b434732 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -23,14 +23,10 @@
#include <asm/cacheflush.h>
#include <asm/suspend.h>
-#ifdef CONFIG_SAMSUNG_ATAGS
#include <mach/map.h>
-#ifndef CONFIG_ARCH_EXYNOS
#include <mach/regs-clock.h>
#include <mach/regs-irq.h>
-#endif
#include <mach/irqs.h>
-#endif
#include <asm/irq.h>
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH 10/10] ARM: s3c64xx: allow building without board support
@ 2015-11-25 16:06 ` Arnd Bergmann
0 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-11-25 16:06 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Krzysztof Kozlowski, linux-samsung-soc, Arnd Bergmann,
Mark Brown, linux-kernel, Tomasz Figa, Vasily Khoruzhick,
Kukjin Kim, Charles Keepax, Ben Dooks
Most of the code for the s3c64xx platform is only used when booting
with ATAGS based board files, but not when using device-tree.
This tries to identify all the s3c64xx specific code that is
unneeded when CONFIG_ATAGS is not set, so we can build a smaller
DT-only kernel if configured that way.
All board support is still left intact but now depends on the
CONFIG_ATAGS symbol that users may intentionally disable.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-s3c64xx/Kconfig | 19 ++++++++++++++-----
arch/arm/mach-s3c64xx/Makefile | 21 ++++++++++++---------
arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h | 3 +++
arch/arm/plat-samsung/pm.c | 4 ----
4 files changed, 29 insertions(+), 18 deletions(-)
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index caf71a99389e..7c0c420c3016 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -7,18 +7,17 @@ menuconfig ARCH_S3C64XX
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_VIC
- select ATAGS
select CLKSRC_SAMSUNG_PWM
select COMMON_CLK_SAMSUNG
- select GPIO_SAMSUNG
+ select GPIO_SAMSUNG if ATAGS
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_TCM
select PLAT_SAMSUNG
select PM_GENERIC_DOMAINS if PM
- select S3C_DEV_NAND
- select S3C_GPIO_TRACK
- select SAMSUNG_ATAGS
+ select S3C_DEV_NAND if ATAGS
+ select S3C_GPIO_TRACK if ATAGS
+ select SAMSUNG_ATAGS if ATAGS
select SAMSUNG_WAKEMASK if PM
select SAMSUNG_WDT_RESET
help
@@ -111,6 +110,7 @@ config S3C64XX_SETUP_USB_PHY
config MACH_SMDK6400
bool "SMDK6400"
+ depends on ATAGS
select CPU_S3C6400
select S3C64XX_SETUP_SDHCI
select S3C_DEV_HSMMC1
@@ -121,6 +121,7 @@ config MACH_SMDK6400
config MACH_ANW6410
bool "A&W6410"
+ depends on ATAGS
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C_DEV_FB
@@ -129,6 +130,7 @@ config MACH_ANW6410
config MACH_MINI6410
bool "MINI6410"
+ depends on ATAGS
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_SDHCI
@@ -144,6 +146,7 @@ config MACH_MINI6410
config MACH_REAL6410
bool "REAL6410"
+ depends on ATAGS
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_SDHCI
@@ -159,6 +162,7 @@ config MACH_REAL6410
config MACH_SMDK6410
bool "SMDK6410"
+ depends on ATAGS
select CPU_S3C6410
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select S3C64XX_SETUP_FB_24BPP
@@ -246,6 +250,7 @@ config SMDK6410_WM1192_EV1
config MACH_NCP
bool "NCP"
+ depends on ATAGS
select CPU_S3C6410
select S3C64XX_SETUP_I2C1
select S3C_DEV_HSMMC1
@@ -255,6 +260,7 @@ config MACH_NCP
config MACH_HMT
bool "Airgoo HMT"
+ depends on ATAGS
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C_DEV_FB
@@ -286,18 +292,21 @@ config MACH_SMARTQ
config MACH_SMARTQ5
bool "SmartQ 5"
+ depends on ATAGS
select MACH_SMARTQ
help
Machine support for the SmartQ 5
config MACH_SMARTQ7
bool "SmartQ 7"
+ depends on ATAGS
select MACH_SMARTQ
help
Machine support for the SmartQ 7
config MACH_WLF_CRAGG_6410
bool "Wolfson Cragganmore 6410"
+ depends on ATAGS
depends on I2C=y
select CPU_S3C6410
select LEDS_GPIO_REGISTER
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 04cdcd40e23c..256cd5b40c60 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -8,20 +8,21 @@
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
-# Core
+# PM
-obj-y += common.o
+obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_PM_SLEEP) += sleep.o
+obj-$(CONFIG_CPU_IDLE) += cpuidle.o
-# Core support
+ifdef CONFIG_SAMSUNG_ATAGS
-obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
-obj-$(CONFIG_CPU_S3C6410) += s3c6410.o
+obj-$(CONFIG_PM_SLEEP) += irq-pm.o
-# PM
+# Core
-obj-$(CONFIG_PM) += pm.o
-obj-$(CONFIG_PM_SLEEP) += irq-pm.o sleep.o
-obj-$(CONFIG_CPU_IDLE) += cpuidle.o
+obj-y += common.o
+obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
+obj-$(CONFIG_CPU_S3C6410) += s3c6410.o
# DMA support
@@ -58,4 +59,6 @@ obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
+endif
+
obj-$(CONFIG_MACH_S3C64XX_DT) += mach-s3c64xx-dt.o
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h b/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h
index 9c81fac3b2d5..1d3636512e33 100644
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h
@@ -14,6 +14,8 @@
#ifndef GPIO_SAMSUNG_S3C64XX_H
#define GPIO_SAMSUNG_S3C64XX_H
+#ifdef CONFIG_GPIO_SAMSUNG
+
/* GPIO bank sizes */
#define S3C64XX_GPIO_A_NR (8)
#define S3C64XX_GPIO_B_NR (7)
@@ -90,5 +92,6 @@ enum s3c_gpio_number {
/* define the number of gpios we need to the one after the GPQ() range */
#define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+#endif /* GPIO_SAMSUNG */
#endif /* GPIO_SAMSUNG_S3C64XX_H */
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index 82777c649774..d7803b434732 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -23,14 +23,10 @@
#include <asm/cacheflush.h>
#include <asm/suspend.h>
-#ifdef CONFIG_SAMSUNG_ATAGS
#include <mach/map.h>
-#ifndef CONFIG_ARCH_EXYNOS
#include <mach/regs-clock.h>
#include <mach/regs-irq.h>
-#endif
#include <mach/irqs.h>
-#endif
#include <asm/irq.h>
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH 10/10] ARM: s3c64xx: allow building without board support
@ 2015-11-25 16:06 ` Arnd Bergmann
0 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-11-25 16:06 UTC (permalink / raw)
To: linux-arm-kernel
Most of the code for the s3c64xx platform is only used when booting
with ATAGS based board files, but not when using device-tree.
This tries to identify all the s3c64xx specific code that is
unneeded when CONFIG_ATAGS is not set, so we can build a smaller
DT-only kernel if configured that way.
All board support is still left intact but now depends on the
CONFIG_ATAGS symbol that users may intentionally disable.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-s3c64xx/Kconfig | 19 ++++++++++++++-----
arch/arm/mach-s3c64xx/Makefile | 21 ++++++++++++---------
arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h | 3 +++
arch/arm/plat-samsung/pm.c | 4 ----
4 files changed, 29 insertions(+), 18 deletions(-)
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index caf71a99389e..7c0c420c3016 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -7,18 +7,17 @@ menuconfig ARCH_S3C64XX
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_VIC
- select ATAGS
select CLKSRC_SAMSUNG_PWM
select COMMON_CLK_SAMSUNG
- select GPIO_SAMSUNG
+ select GPIO_SAMSUNG if ATAGS
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_TCM
select PLAT_SAMSUNG
select PM_GENERIC_DOMAINS if PM
- select S3C_DEV_NAND
- select S3C_GPIO_TRACK
- select SAMSUNG_ATAGS
+ select S3C_DEV_NAND if ATAGS
+ select S3C_GPIO_TRACK if ATAGS
+ select SAMSUNG_ATAGS if ATAGS
select SAMSUNG_WAKEMASK if PM
select SAMSUNG_WDT_RESET
help
@@ -111,6 +110,7 @@ config S3C64XX_SETUP_USB_PHY
config MACH_SMDK6400
bool "SMDK6400"
+ depends on ATAGS
select CPU_S3C6400
select S3C64XX_SETUP_SDHCI
select S3C_DEV_HSMMC1
@@ -121,6 +121,7 @@ config MACH_SMDK6400
config MACH_ANW6410
bool "A&W6410"
+ depends on ATAGS
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C_DEV_FB
@@ -129,6 +130,7 @@ config MACH_ANW6410
config MACH_MINI6410
bool "MINI6410"
+ depends on ATAGS
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_SDHCI
@@ -144,6 +146,7 @@ config MACH_MINI6410
config MACH_REAL6410
bool "REAL6410"
+ depends on ATAGS
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_SDHCI
@@ -159,6 +162,7 @@ config MACH_REAL6410
config MACH_SMDK6410
bool "SMDK6410"
+ depends on ATAGS
select CPU_S3C6410
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select S3C64XX_SETUP_FB_24BPP
@@ -246,6 +250,7 @@ config SMDK6410_WM1192_EV1
config MACH_NCP
bool "NCP"
+ depends on ATAGS
select CPU_S3C6410
select S3C64XX_SETUP_I2C1
select S3C_DEV_HSMMC1
@@ -255,6 +260,7 @@ config MACH_NCP
config MACH_HMT
bool "Airgoo HMT"
+ depends on ATAGS
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C_DEV_FB
@@ -286,18 +292,21 @@ config MACH_SMARTQ
config MACH_SMARTQ5
bool "SmartQ 5"
+ depends on ATAGS
select MACH_SMARTQ
help
Machine support for the SmartQ 5
config MACH_SMARTQ7
bool "SmartQ 7"
+ depends on ATAGS
select MACH_SMARTQ
help
Machine support for the SmartQ 7
config MACH_WLF_CRAGG_6410
bool "Wolfson Cragganmore 6410"
+ depends on ATAGS
depends on I2C=y
select CPU_S3C6410
select LEDS_GPIO_REGISTER
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 04cdcd40e23c..256cd5b40c60 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -8,20 +8,21 @@
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
-# Core
+# PM
-obj-y += common.o
+obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_PM_SLEEP) += sleep.o
+obj-$(CONFIG_CPU_IDLE) += cpuidle.o
-# Core support
+ifdef CONFIG_SAMSUNG_ATAGS
-obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
-obj-$(CONFIG_CPU_S3C6410) += s3c6410.o
+obj-$(CONFIG_PM_SLEEP) += irq-pm.o
-# PM
+# Core
-obj-$(CONFIG_PM) += pm.o
-obj-$(CONFIG_PM_SLEEP) += irq-pm.o sleep.o
-obj-$(CONFIG_CPU_IDLE) += cpuidle.o
+obj-y += common.o
+obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
+obj-$(CONFIG_CPU_S3C6410) += s3c6410.o
# DMA support
@@ -58,4 +59,6 @@ obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
+endif
+
obj-$(CONFIG_MACH_S3C64XX_DT) += mach-s3c64xx-dt.o
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h b/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h
index 9c81fac3b2d5..1d3636512e33 100644
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h
@@ -14,6 +14,8 @@
#ifndef GPIO_SAMSUNG_S3C64XX_H
#define GPIO_SAMSUNG_S3C64XX_H
+#ifdef CONFIG_GPIO_SAMSUNG
+
/* GPIO bank sizes */
#define S3C64XX_GPIO_A_NR (8)
#define S3C64XX_GPIO_B_NR (7)
@@ -90,5 +92,6 @@ enum s3c_gpio_number {
/* define the number of gpios we need to the one after the GPQ() range */
#define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+#endif /* GPIO_SAMSUNG */
#endif /* GPIO_SAMSUNG_S3C64XX_H */
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index 82777c649774..d7803b434732 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -23,14 +23,10 @@
#include <asm/cacheflush.h>
#include <asm/suspend.h>
-#ifdef CONFIG_SAMSUNG_ATAGS
#include <mach/map.h>
-#ifndef CONFIG_ARCH_EXYNOS
#include <mach/regs-clock.h>
#include <mach/regs-irq.h>
-#endif
#include <mach/irqs.h>
-#endif
#include <asm/irq.h>
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* Re: [PATCH 00/10] ARM: s3c64xx multiplatform
2015-11-25 16:06 ` Arnd Bergmann
@ 2015-11-25 16:31 ` Mark Brown
-1 siblings, 0 replies; 43+ messages in thread
From: Mark Brown @ 2015-11-25 16:31 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-arm-kernel, linux-kernel, Kukjin Kim, Krzysztof Kozlowski,
Vasily Khoruzhick, Charles Keepax, Tomasz Figa, Ben Dooks,
linux-samsung-soc
[-- Attachment #1: Type: text/plain, Size: 438 bytes --]
On Wed, Nov 25, 2015 at 05:06:45PM +0100, Arnd Bergmann wrote:
> I've posted the series before and we got a few people to test it
> the last time, though I think the touchscreen portion is still
> untested.
>
> I'd really like to get this merged for 4.5 and would put it into
> a next/multiplatform branch unless there are any objections
> or concerns.
Is this a series with interdependencies or just a set of separate fixes?
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH 00/10] ARM: s3c64xx multiplatform
@ 2015-11-25 16:31 ` Mark Brown
0 siblings, 0 replies; 43+ messages in thread
From: Mark Brown @ 2015-11-25 16:31 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Nov 25, 2015 at 05:06:45PM +0100, Arnd Bergmann wrote:
> I've posted the series before and we got a few people to test it
> the last time, though I think the touchscreen portion is still
> untested.
>
> I'd really like to get this merged for 4.5 and would put it into
> a next/multiplatform branch unless there are any objections
> or concerns.
Is this a series with interdependencies or just a set of separate fixes?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151125/e2a64086/attachment.sig>
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH 00/10] ARM: s3c64xx multiplatform
2015-11-25 16:31 ` Mark Brown
@ 2015-11-25 16:33 ` Arnd Bergmann
-1 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-11-25 16:33 UTC (permalink / raw)
To: Mark Brown
Cc: linux-arm-kernel, linux-kernel, Kukjin Kim, Krzysztof Kozlowski,
Vasily Khoruzhick, Charles Keepax, Tomasz Figa, Ben Dooks,
linux-samsung-soc
On Wednesday 25 November 2015 16:31:14 Mark Brown wrote:
> On Wed, Nov 25, 2015 at 05:06:45PM +0100, Arnd Bergmann wrote:
> > I've posted the series before and we got a few people to test it
> > the last time, though I think the touchscreen portion is still
> > untested.
> >
> > I'd really like to get this merged for 4.5 and would put it into
> > a next/multiplatform branch unless there are any objections
> > or concerns.
>
> Is this a series with interdependencies or just a set of separate fixes?
>
Patch 9/10 depends on the first eight patches, the last one depends on
that.
Arnd
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH 00/10] ARM: s3c64xx multiplatform
@ 2015-11-25 16:33 ` Arnd Bergmann
0 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-11-25 16:33 UTC (permalink / raw)
To: linux-arm-kernel
On Wednesday 25 November 2015 16:31:14 Mark Brown wrote:
> On Wed, Nov 25, 2015 at 05:06:45PM +0100, Arnd Bergmann wrote:
> > I've posted the series before and we got a few people to test it
> > the last time, though I think the touchscreen portion is still
> > untested.
> >
> > I'd really like to get this merged for 4.5 and would put it into
> > a next/multiplatform branch unless there are any objections
> > or concerns.
>
> Is this a series with interdependencies or just a set of separate fixes?
>
Patch 9/10 depends on the first eight patches, the last one depends on
that.
Arnd
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH 01/10] Input: s3c2410_ts: fix S3C_ADC dependency
2015-11-25 16:06 ` Arnd Bergmann
@ 2015-11-30 23:48 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 43+ messages in thread
From: Krzysztof Kozlowski @ 2015-11-30 23:48 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel
Cc: linux-kernel, Kukjin Kim, Mark Brown, Vasily Khoruzhick,
Charles Keepax, Tomasz Figa, Ben Dooks, linux-samsung-soc
On 26.11.2015 01:06, Arnd Bergmann wrote:
> S3C_ADC is only available on machines that don't do ARCH_MULTIPLATFORM,
> so changing the 'select' into 'depends on' here helps us move to
> ARCH_MULTIPLATFORM without introducing regressions.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> ---
> drivers/input/touchscreen/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH 01/10] Input: s3c2410_ts: fix S3C_ADC dependency
@ 2015-11-30 23:48 ` Krzysztof Kozlowski
0 siblings, 0 replies; 43+ messages in thread
From: Krzysztof Kozlowski @ 2015-11-30 23:48 UTC (permalink / raw)
To: linux-arm-kernel
On 26.11.2015 01:06, Arnd Bergmann wrote:
> S3C_ADC is only available on machines that don't do ARCH_MULTIPLATFORM,
> so changing the 'select' into 'depends on' here helps us move to
> ARCH_MULTIPLATFORM without introducing regressions.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> ---
> drivers/input/touchscreen/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH 02/10] ASoC: samsung/smartq: use dynamic registration
2015-11-25 16:06 ` Arnd Bergmann
@ 2015-12-01 0:24 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 43+ messages in thread
From: Krzysztof Kozlowski @ 2015-12-01 0:24 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel
Cc: linux-kernel, Kukjin Kim, Mark Brown, Vasily Khoruzhick,
Charles Keepax, Tomasz Figa, Ben Dooks, linux-samsung-soc
On 26.11.2015 01:06, Arnd Bergmann wrote:
> As a prerequisite for moving s3c64xx into multiplatform configurations,
> we need to change the smartq audio driver to stop using hardcoded
> gpio numbers from the header file, and instead pass the gpio data
> through platform_data.
>
> In order to do that, we also move the code to use module_platform_driver
> and register the platform device using platform_device_register_simple
> and register the gpios through the gpiod API.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Acked-by: Mark Brown <broonie@kernel.org>
> ---
> arch/arm/mach-s3c64xx/mach-smartq.c | 13 +++++++
> sound/soc/samsung/smartq_wm8987.c | 77 +++++++++++++------------------------
> 2 files changed, 40 insertions(+), 50 deletions(-)
>
> diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
> index acdfb5fac40f..96784e7f894a 100644
> --- a/arch/arm/mach-s3c64xx/mach-smartq.c
> +++ b/arch/arm/mach-s3c64xx/mach-smartq.c
> @@ -12,6 +12,7 @@
> #include <linux/delay.h>
> #include <linux/fb.h>
> #include <linux/gpio.h>
> +#include <linux/gpio/machine.h>
> #include <linux/init.h>
> #include <linux/platform_device.h>
> #include <linux/pwm.h>
> @@ -383,6 +384,15 @@ void __init smartq_map_io(void)
> smartq_lcd_mode_set();
> }
>
> +static struct gpiod_lookup_table smartq_audio_gpios = {
> + .dev_id = "smartq-audio",
> + .table = {
> + GPIO_LOOKUP("GPL", 12, "headphone detect", 0),
> + GPIO_LOOKUP("GPK", 12, "amplifiers shutdown", 0),
> + { },
> + },
> +};
> +
> void __init smartq_machine_init(void)
> {
> s3c_i2c0_set_platdata(NULL);
> @@ -402,4 +412,7 @@ void __init smartq_machine_init(void)
>
> pwm_add_table(smartq_pwm_lookup, ARRAY_SIZE(smartq_pwm_lookup));
> platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
> +
> + gpiod_add_lookup_table(&smartq_audio_gpios);
> + platform_device_register_simple("smartq-audio", -1, NULL, 0);
> }
> diff --git a/sound/soc/samsung/smartq_wm8987.c b/sound/soc/samsung/smartq_wm8987.c
> index a0fe37fbed9f..c6769b16eb19 100644
> --- a/sound/soc/samsung/smartq_wm8987.c
> +++ b/sound/soc/samsung/smartq_wm8987.c
> @@ -13,15 +13,12 @@
> *
> */
>
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/module.h>
>
> #include <sound/soc.h>
> #include <sound/jack.h>
>
> -#include <mach/gpio-samsung.h>
> -#include <asm/mach-types.h>
> -
> #include "i2s.h"
> #include "../codecs/wm8750.h"
>
> @@ -96,7 +93,7 @@ static struct snd_soc_jack_pin smartq_jack_pins[] = {
>
> static struct snd_soc_jack_gpio smartq_jack_gpios[] = {
> {
> - .gpio = S3C64XX_GPL(12),
> + .gpio = -1,
> .name = "headphone detect",
> .report = SND_JACK_HEADPHONE,
> .debounce_time = 200,
> @@ -113,7 +110,9 @@ static int smartq_speaker_event(struct snd_soc_dapm_widget *w,
> struct snd_kcontrol *k,
> int event)
> {
> - gpio_set_value(S3C64XX_GPK(12), SND_SOC_DAPM_EVENT_OFF(event));
> + struct gpio_desc *gpio = snd_soc_card_get_drvdata(&snd_soc_smartq);
> +
> + gpiod_set_value(gpio, SND_SOC_DAPM_EVENT_OFF(event));
>
> return 0;
> }
> @@ -199,62 +198,40 @@ static struct snd_soc_card snd_soc_smartq = {
> .num_controls = ARRAY_SIZE(wm8987_smartq_controls),
> };
>
> -static struct platform_device *smartq_snd_device;
> -
> -static int __init smartq_init(void)
> +static int smartq_probe(struct platform_device *pdev)
> {
> + struct gpio_desc *gpio;
> int ret;
>
> - if (!machine_is_smartq7() && !machine_is_smartq5()) {
> - pr_info("Only SmartQ is supported by this ASoC driver\n");
> - return -ENODEV;
> - }
> -
> - smartq_snd_device = platform_device_alloc("soc-audio", -1);
> - if (!smartq_snd_device)
> - return -ENOMEM;
> -
> - platform_set_drvdata(smartq_snd_device, &snd_soc_smartq);
> -
> - ret = platform_device_add(smartq_snd_device);
> - if (ret) {
> - platform_device_put(smartq_snd_device);
> - return ret;
> - }
> + platform_set_drvdata(pdev, &snd_soc_smartq);
>
> /* Initialise GPIOs used by amplifiers */
> - ret = gpio_request(S3C64XX_GPK(12), "amplifiers shutdown");
> - if (ret) {
> - dev_err(&smartq_snd_device->dev, "Failed to register GPK12\n");
> - goto err_unregister_device;
> + gpio = devm_gpiod_get(&pdev->dev, "amplifiers shutdown",
> + GPIOD_OUT_HIGH);
> + if (IS_ERR(gpio)) {
> + dev_err(&pdev->dev, "Failed to register GPK12\n");
> + ret = PTR_ERR(gpio);
> + goto out;
> }
> + snd_soc_card_set_drvdata(&snd_soc_smartq, gpio);
>
> - /* Disable amplifiers */
> - ret = gpio_direction_output(S3C64XX_GPK(12), 1);
> - if (ret) {
> - dev_err(&smartq_snd_device->dev, "Failed to configure GPK12\n");
> - goto err_free_gpio_amp_shut;
> - }
> -
> - return 0;
> -
> -err_free_gpio_amp_shut:
> - gpio_free(S3C64XX_GPK(12));
> -err_unregister_device:
> - platform_device_unregister(smartq_snd_device);
> + ret = devm_snd_soc_register_card(&pdev->dev, &snd_soc_smartq);
> + if (ret)
> + dev_err(&pdev->dev, "Failed to register card\n");
>
> +out:
> return ret;
> }
>
> -static void __exit smartq_exit(void)
> -{
> - gpio_free(S3C64XX_GPK(12));
> -
> - platform_device_unregister(smartq_snd_device);
> -}
> +static struct platform_driver smartq_driver = {
> + .driver = {
> + .name = "smartq-audio",
> + .owner = THIS_MODULE,
The owner should not be needed (coccicheck should also complain). Rest
looks good, so:
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH 02/10] ASoC: samsung/smartq: use dynamic registration
@ 2015-12-01 0:24 ` Krzysztof Kozlowski
0 siblings, 0 replies; 43+ messages in thread
From: Krzysztof Kozlowski @ 2015-12-01 0:24 UTC (permalink / raw)
To: linux-arm-kernel
On 26.11.2015 01:06, Arnd Bergmann wrote:
> As a prerequisite for moving s3c64xx into multiplatform configurations,
> we need to change the smartq audio driver to stop using hardcoded
> gpio numbers from the header file, and instead pass the gpio data
> through platform_data.
>
> In order to do that, we also move the code to use module_platform_driver
> and register the platform device using platform_device_register_simple
> and register the gpios through the gpiod API.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Acked-by: Mark Brown <broonie@kernel.org>
> ---
> arch/arm/mach-s3c64xx/mach-smartq.c | 13 +++++++
> sound/soc/samsung/smartq_wm8987.c | 77 +++++++++++++------------------------
> 2 files changed, 40 insertions(+), 50 deletions(-)
>
> diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
> index acdfb5fac40f..96784e7f894a 100644
> --- a/arch/arm/mach-s3c64xx/mach-smartq.c
> +++ b/arch/arm/mach-s3c64xx/mach-smartq.c
> @@ -12,6 +12,7 @@
> #include <linux/delay.h>
> #include <linux/fb.h>
> #include <linux/gpio.h>
> +#include <linux/gpio/machine.h>
> #include <linux/init.h>
> #include <linux/platform_device.h>
> #include <linux/pwm.h>
> @@ -383,6 +384,15 @@ void __init smartq_map_io(void)
> smartq_lcd_mode_set();
> }
>
> +static struct gpiod_lookup_table smartq_audio_gpios = {
> + .dev_id = "smartq-audio",
> + .table = {
> + GPIO_LOOKUP("GPL", 12, "headphone detect", 0),
> + GPIO_LOOKUP("GPK", 12, "amplifiers shutdown", 0),
> + { },
> + },
> +};
> +
> void __init smartq_machine_init(void)
> {
> s3c_i2c0_set_platdata(NULL);
> @@ -402,4 +412,7 @@ void __init smartq_machine_init(void)
>
> pwm_add_table(smartq_pwm_lookup, ARRAY_SIZE(smartq_pwm_lookup));
> platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
> +
> + gpiod_add_lookup_table(&smartq_audio_gpios);
> + platform_device_register_simple("smartq-audio", -1, NULL, 0);
> }
> diff --git a/sound/soc/samsung/smartq_wm8987.c b/sound/soc/samsung/smartq_wm8987.c
> index a0fe37fbed9f..c6769b16eb19 100644
> --- a/sound/soc/samsung/smartq_wm8987.c
> +++ b/sound/soc/samsung/smartq_wm8987.c
> @@ -13,15 +13,12 @@
> *
> */
>
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/module.h>
>
> #include <sound/soc.h>
> #include <sound/jack.h>
>
> -#include <mach/gpio-samsung.h>
> -#include <asm/mach-types.h>
> -
> #include "i2s.h"
> #include "../codecs/wm8750.h"
>
> @@ -96,7 +93,7 @@ static struct snd_soc_jack_pin smartq_jack_pins[] = {
>
> static struct snd_soc_jack_gpio smartq_jack_gpios[] = {
> {
> - .gpio = S3C64XX_GPL(12),
> + .gpio = -1,
> .name = "headphone detect",
> .report = SND_JACK_HEADPHONE,
> .debounce_time = 200,
> @@ -113,7 +110,9 @@ static int smartq_speaker_event(struct snd_soc_dapm_widget *w,
> struct snd_kcontrol *k,
> int event)
> {
> - gpio_set_value(S3C64XX_GPK(12), SND_SOC_DAPM_EVENT_OFF(event));
> + struct gpio_desc *gpio = snd_soc_card_get_drvdata(&snd_soc_smartq);
> +
> + gpiod_set_value(gpio, SND_SOC_DAPM_EVENT_OFF(event));
>
> return 0;
> }
> @@ -199,62 +198,40 @@ static struct snd_soc_card snd_soc_smartq = {
> .num_controls = ARRAY_SIZE(wm8987_smartq_controls),
> };
>
> -static struct platform_device *smartq_snd_device;
> -
> -static int __init smartq_init(void)
> +static int smartq_probe(struct platform_device *pdev)
> {
> + struct gpio_desc *gpio;
> int ret;
>
> - if (!machine_is_smartq7() && !machine_is_smartq5()) {
> - pr_info("Only SmartQ is supported by this ASoC driver\n");
> - return -ENODEV;
> - }
> -
> - smartq_snd_device = platform_device_alloc("soc-audio", -1);
> - if (!smartq_snd_device)
> - return -ENOMEM;
> -
> - platform_set_drvdata(smartq_snd_device, &snd_soc_smartq);
> -
> - ret = platform_device_add(smartq_snd_device);
> - if (ret) {
> - platform_device_put(smartq_snd_device);
> - return ret;
> - }
> + platform_set_drvdata(pdev, &snd_soc_smartq);
>
> /* Initialise GPIOs used by amplifiers */
> - ret = gpio_request(S3C64XX_GPK(12), "amplifiers shutdown");
> - if (ret) {
> - dev_err(&smartq_snd_device->dev, "Failed to register GPK12\n");
> - goto err_unregister_device;
> + gpio = devm_gpiod_get(&pdev->dev, "amplifiers shutdown",
> + GPIOD_OUT_HIGH);
> + if (IS_ERR(gpio)) {
> + dev_err(&pdev->dev, "Failed to register GPK12\n");
> + ret = PTR_ERR(gpio);
> + goto out;
> }
> + snd_soc_card_set_drvdata(&snd_soc_smartq, gpio);
>
> - /* Disable amplifiers */
> - ret = gpio_direction_output(S3C64XX_GPK(12), 1);
> - if (ret) {
> - dev_err(&smartq_snd_device->dev, "Failed to configure GPK12\n");
> - goto err_free_gpio_amp_shut;
> - }
> -
> - return 0;
> -
> -err_free_gpio_amp_shut:
> - gpio_free(S3C64XX_GPK(12));
> -err_unregister_device:
> - platform_device_unregister(smartq_snd_device);
> + ret = devm_snd_soc_register_card(&pdev->dev, &snd_soc_smartq);
> + if (ret)
> + dev_err(&pdev->dev, "Failed to register card\n");
>
> +out:
> return ret;
> }
>
> -static void __exit smartq_exit(void)
> -{
> - gpio_free(S3C64XX_GPK(12));
> -
> - platform_device_unregister(smartq_snd_device);
> -}
> +static struct platform_driver smartq_driver = {
> + .driver = {
> + .name = "smartq-audio",
> + .owner = THIS_MODULE,
The owner should not be needed (coccicheck should also complain). Rest
looks good, so:
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH 03/10] gpio: samsung: move gpio-samsung driver back to platform code
2015-11-25 16:06 ` Arnd Bergmann
@ 2015-12-01 0:34 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 43+ messages in thread
From: Krzysztof Kozlowski @ 2015-12-01 0:34 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel
Cc: linux-kernel, Kukjin Kim, Mark Brown, Vasily Khoruzhick,
Charles Keepax, Tomasz Figa, Ben Dooks, linux-samsung-soc
On 26.11.2015 01:06, Arnd Bergmann wrote:
> The gpio-samsung driver is special in the sense that it
> interacts directly in multiple ways with the legacy platform
> code for the s3c24xx and s3c64xx platforms. In contrast,
> all devicetree based machines for Samsung, including the
> ones on those two SoC families use a different driver.
>
> The header files that define the interface between the platform
> code and the gpio driver are not visible when building a
> kernel for ARCH_MULTIPLATFORM, which prevents us from
> turning on this option for s3c64xx.
>
> To work around this, we now move the driver back into platform
> code, from where it was originally moved to as part of commit
> 1b39d5f2cc5c28 ("gpio/samsung: gpio-samsung.c to support
> Samsung GPIOs").
>
> The long-term plan for this driver would be to remove it
> entirely, after all Samsung machines have been converted
> over to boot from DT, but there is currently no timeline
> for when that might happen.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> arch/arm/plat-samsung/Kconfig | 3 +++
> arch/arm/plat-samsung/Makefile | 2 ++
> {drivers/gpio => arch/arm/plat-samsung}/gpio-samsung.c | 0
> drivers/gpio/Kconfig | 7 -------
> drivers/gpio/Makefile | 1 -
> 5 files changed, 5 insertions(+), 8 deletions(-)
> rename {drivers/gpio => arch/arm/plat-samsung}/gpio-samsung.c (100%)
>
> diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
> index 57729b915003..83697414bfa0 100644
> --- a/arch/arm/plat-samsung/Kconfig
> +++ b/arch/arm/plat-samsung/Kconfig
> @@ -294,6 +294,9 @@ config SAMSUNG_WDT_RESET
> Compile support for system restart by triggering watchdog reset.
> Used on SoCs that do not provide dedicated reset control.
>
> +config GPIO_SAMSUNG
> + def_bool SAMSUNG_ATAGS
> +
I think this should be put inside "if SAMSUNG_ATAGS" section, just
before SAMSUNG_PM_GPIO (with default=y?). It makes more consistent with
rest of the options depending on ATAGS.
Rest seems fine:
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH 03/10] gpio: samsung: move gpio-samsung driver back to platform code
@ 2015-12-01 0:34 ` Krzysztof Kozlowski
0 siblings, 0 replies; 43+ messages in thread
From: Krzysztof Kozlowski @ 2015-12-01 0:34 UTC (permalink / raw)
To: linux-arm-kernel
On 26.11.2015 01:06, Arnd Bergmann wrote:
> The gpio-samsung driver is special in the sense that it
> interacts directly in multiple ways with the legacy platform
> code for the s3c24xx and s3c64xx platforms. In contrast,
> all devicetree based machines for Samsung, including the
> ones on those two SoC families use a different driver.
>
> The header files that define the interface between the platform
> code and the gpio driver are not visible when building a
> kernel for ARCH_MULTIPLATFORM, which prevents us from
> turning on this option for s3c64xx.
>
> To work around this, we now move the driver back into platform
> code, from where it was originally moved to as part of commit
> 1b39d5f2cc5c28 ("gpio/samsung: gpio-samsung.c to support
> Samsung GPIOs").
>
> The long-term plan for this driver would be to remove it
> entirely, after all Samsung machines have been converted
> over to boot from DT, but there is currently no timeline
> for when that might happen.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> arch/arm/plat-samsung/Kconfig | 3 +++
> arch/arm/plat-samsung/Makefile | 2 ++
> {drivers/gpio => arch/arm/plat-samsung}/gpio-samsung.c | 0
> drivers/gpio/Kconfig | 7 -------
> drivers/gpio/Makefile | 1 -
> 5 files changed, 5 insertions(+), 8 deletions(-)
> rename {drivers/gpio => arch/arm/plat-samsung}/gpio-samsung.c (100%)
>
> diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
> index 57729b915003..83697414bfa0 100644
> --- a/arch/arm/plat-samsung/Kconfig
> +++ b/arch/arm/plat-samsung/Kconfig
> @@ -294,6 +294,9 @@ config SAMSUNG_WDT_RESET
> Compile support for system restart by triggering watchdog reset.
> Used on SoCs that do not provide dedicated reset control.
>
> +config GPIO_SAMSUNG
> + def_bool SAMSUNG_ATAGS
> +
I think this should be put inside "if SAMSUNG_ATAGS" section, just
before SAMSUNG_PM_GPIO (with default=y?). It makes more consistent with
rest of the options depending on ATAGS.
Rest seems fine:
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH 04/10] ARM: s3c64xx: prepare initcalls for multiplatform
2015-11-25 16:06 ` Arnd Bergmann
@ 2015-12-01 1:23 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 43+ messages in thread
From: Krzysztof Kozlowski @ 2015-12-01 1:23 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel
Cc: linux-kernel, Kukjin Kim, Mark Brown, Vasily Khoruzhick,
Charles Keepax, Tomasz Figa, Ben Dooks, linux-samsung-soc
On 26.11.2015 01:06, Arnd Bergmann wrote:
> In a multiplatform kernel, each initcall is run regardless
> of the platform it is meant for, so it must not attempt to
> access SoC-specific registers.
>
> This adds 'if (soc_is_s3c64xx)' to all initcalls that are
> specific to the s3c64xx platform, to prevent them from breaking
> other platforms once we can build them into a combined kernel.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> arch/arm/mach-s3c64xx/common.c | 4 ++--
> arch/arm/mach-s3c64xx/cpuidle.c | 5 ++++-
> arch/arm/mach-s3c64xx/irq-pm.c | 2 +-
> arch/arm/mach-s3c64xx/mach-crag6410-module.c | 4 ++++
> arch/arm/mach-s3c64xx/pl080.c | 4 ++++
> arch/arm/mach-s3c64xx/pm.c | 4 ++++
> arch/arm/mach-s3c64xx/s3c6400.c | 2 +-
> arch/arm/mach-s3c64xx/s3c6410.c | 2 +-
> arch/arm/plat-samsung/gpio-samsung.c | 11 +++++------
> arch/arm/plat-samsung/init.c | 5 +++++
> 10 files changed, 31 insertions(+), 12 deletions(-)
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH 04/10] ARM: s3c64xx: prepare initcalls for multiplatform
@ 2015-12-01 1:23 ` Krzysztof Kozlowski
0 siblings, 0 replies; 43+ messages in thread
From: Krzysztof Kozlowski @ 2015-12-01 1:23 UTC (permalink / raw)
To: linux-arm-kernel
On 26.11.2015 01:06, Arnd Bergmann wrote:
> In a multiplatform kernel, each initcall is run regardless
> of the platform it is meant for, so it must not attempt to
> access SoC-specific registers.
>
> This adds 'if (soc_is_s3c64xx)' to all initcalls that are
> specific to the s3c64xx platform, to prevent them from breaking
> other platforms once we can build them into a combined kernel.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> arch/arm/mach-s3c64xx/common.c | 4 ++--
> arch/arm/mach-s3c64xx/cpuidle.c | 5 ++++-
> arch/arm/mach-s3c64xx/irq-pm.c | 2 +-
> arch/arm/mach-s3c64xx/mach-crag6410-module.c | 4 ++++
> arch/arm/mach-s3c64xx/pl080.c | 4 ++++
> arch/arm/mach-s3c64xx/pm.c | 4 ++++
> arch/arm/mach-s3c64xx/s3c6400.c | 2 +-
> arch/arm/mach-s3c64xx/s3c6410.c | 2 +-
> arch/arm/plat-samsung/gpio-samsung.c | 11 +++++------
> arch/arm/plat-samsung/init.c | 5 +++++
> 10 files changed, 31 insertions(+), 12 deletions(-)
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH 02/10] ASoC: samsung/smartq: use dynamic registration
2015-12-01 0:24 ` Krzysztof Kozlowski
@ 2015-12-01 15:11 ` Arnd Bergmann
-1 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-12-01 15:11 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: linux-arm-kernel, linux-kernel, Kukjin Kim, Mark Brown,
Vasily Khoruzhick, Charles Keepax, Tomasz Figa, Ben Dooks,
linux-samsung-soc
On Tuesday 01 December 2015 09:24:24 Krzysztof Kozlowski wrote:
> > +static struct platform_driver smartq_driver = {
> > + .driver = {
> > + .name = "smartq-audio",
> > + .owner = THIS_MODULE,
>
> The owner should not be needed (coccicheck should also complain). Rest
> looks good, so:
Good catch, fixed now!
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
thanks,
Arnd
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH 02/10] ASoC: samsung/smartq: use dynamic registration
@ 2015-12-01 15:11 ` Arnd Bergmann
0 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-12-01 15:11 UTC (permalink / raw)
To: linux-arm-kernel
On Tuesday 01 December 2015 09:24:24 Krzysztof Kozlowski wrote:
> > +static struct platform_driver smartq_driver = {
> > + .driver = {
> > + .name = "smartq-audio",
> > + .owner = THIS_MODULE,
>
> The owner should not be needed (coccicheck should also complain). Rest
> looks good, so:
Good catch, fixed now!
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
thanks,
Arnd
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH 03/10] gpio: samsung: move gpio-samsung driver back to platform code
2015-12-01 0:34 ` Krzysztof Kozlowski
@ 2015-12-01 15:33 ` Arnd Bergmann
-1 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-12-01 15:33 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Krzysztof Kozlowski, linux-samsung-soc, linux-kernel,
Tomasz Figa, Vasily Khoruzhick, Mark Brown, Kukjin Kim,
Charles Keepax, Ben Dooks
On Tuesday 01 December 2015 09:34:18 Krzysztof Kozlowski wrote:
> On 26.11.2015 01:06, Arnd Bergmann wrote:
> > diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
> > index 57729b915003..83697414bfa0 100644
> > --- a/arch/arm/plat-samsung/Kconfig
> > +++ b/arch/arm/plat-samsung/Kconfig
> > @@ -294,6 +294,9 @@ config SAMSUNG_WDT_RESET
> > Compile support for system restart by triggering watchdog reset.
> > Used on SoCs that do not provide dedicated reset control.
> >
> > +config GPIO_SAMSUNG
> > + def_bool SAMSUNG_ATAGS
> > +
>
> I think this should be put inside "if SAMSUNG_ATAGS" section, just
> before SAMSUNG_PM_GPIO (with default=y?). It makes more consistent with
> rest of the options depending on ATAGS.
Good idea, changed that now.
> Rest seems fine:
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Thanks,
Arnd
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH 03/10] gpio: samsung: move gpio-samsung driver back to platform code
@ 2015-12-01 15:33 ` Arnd Bergmann
0 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-12-01 15:33 UTC (permalink / raw)
To: linux-arm-kernel
On Tuesday 01 December 2015 09:34:18 Krzysztof Kozlowski wrote:
> On 26.11.2015 01:06, Arnd Bergmann wrote:
> > diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
> > index 57729b915003..83697414bfa0 100644
> > --- a/arch/arm/plat-samsung/Kconfig
> > +++ b/arch/arm/plat-samsung/Kconfig
> > @@ -294,6 +294,9 @@ config SAMSUNG_WDT_RESET
> > Compile support for system restart by triggering watchdog reset.
> > Used on SoCs that do not provide dedicated reset control.
> >
> > +config GPIO_SAMSUNG
> > + def_bool SAMSUNG_ATAGS
> > +
>
> I think this should be put inside "if SAMSUNG_ATAGS" section, just
> before SAMSUNG_PM_GPIO (with default=y?). It makes more consistent with
> rest of the options depending on ATAGS.
Good idea, changed that now.
> Rest seems fine:
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Thanks,
Arnd
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH 04/10] ARM: s3c64xx: prepare initcalls for multiplatform
2015-03-02 12:35 [PATCH 00/10] ARM: s3c64xx multiplatform, help needed Arnd Bergmann
@ 2015-03-02 12:35 ` Arnd Bergmann
0 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-03-02 12:35 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Kukjin Kim, linux-samsung-soc, Maurus Cuelenaere, Mark Brown,
Liam Girdwood, dmitry.torokhov, ch.naveen, a.kesavan, cw00.choi,
jic23, Tomasz Figa, padma.v, Arnd Bergmann
In a multiplatform kernel, each initcall is run regardless
of the platform it is meant for, so it must not attempt to
access SoC-specific registers.
This adds 'if (soc_is_s3c64xx)' to all initcalls that are
specific to the s3c64xx platform, to prevent them from breaking
other platforms once we can build them into a combined kernel.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-s3c64xx/common.c | 4 ++--
arch/arm/mach-s3c64xx/cpuidle.c | 5 ++++-
arch/arm/mach-s3c64xx/irq-pm.c | 2 +-
arch/arm/mach-s3c64xx/mach-crag6410-module.c | 4 ++++
arch/arm/mach-s3c64xx/pl080.c | 4 ++++
arch/arm/mach-s3c64xx/pm.c | 4 ++++
arch/arm/mach-s3c64xx/s3c6400.c | 2 +-
arch/arm/mach-s3c64xx/s3c6410.c | 2 +-
arch/arm/plat-samsung/gpio-samsung.c | 11 +++++------
arch/arm/plat-samsung/init.c | 5 +++++
10 files changed, 31 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index 16547f2641a3..cca29aa49fd3 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -209,7 +209,7 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
static __init int s3c64xx_dev_init(void)
{
/* Not applicable when using DT. */
- if (of_have_populated_dt())
+ if (of_have_populated_dt() || !soc_is_s3c64xx())
return 0;
subsys_system_register(&s3c64xx_subsys, NULL);
@@ -414,7 +414,7 @@ static int __init s3c64xx_init_irq_eint(void)
int irq;
/* On DT-enabled systems EINTs are handled by pinctrl-s3c64xx driver. */
- if (of_have_populated_dt())
+ if (of_have_populated_dt() || !soc_is_s3c64xx())
return -ENODEV;
for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-s3c64xx/cpuidle.c
index 2eb072440dfa..92b41c2b7314 100644
--- a/arch/arm/mach-s3c64xx/cpuidle.c
+++ b/arch/arm/mach-s3c64xx/cpuidle.c
@@ -18,6 +18,7 @@
#include <asm/proc-fns.h>
+#include <plat/cpu.h>
#include <mach/map.h>
#include "regs-sys.h"
@@ -57,6 +58,8 @@ static struct cpuidle_driver s3c64xx_cpuidle_driver = {
static int __init s3c64xx_init_cpuidle(void)
{
- return cpuidle_register(&s3c64xx_cpuidle_driver, NULL);
+ if (soc_is_s3c64xx())
+ return cpuidle_register(&s3c64xx_cpuidle_driver, NULL);
+ return 0;
}
device_initcall(s3c64xx_init_cpuidle);
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
index ae4ea7601f60..0bbf1faaee42 100644
--- a/arch/arm/mach-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -113,7 +113,7 @@ static struct syscore_ops s3c64xx_irq_syscore_ops = {
static __init int s3c64xx_syscore_init(void)
{
/* Appropriate drivers (pinctrl, uart) handle this when using DT. */
- if (of_have_populated_dt())
+ if (of_have_populated_dt() || !soc_is_s3c64xx())
return 0;
register_syscore_ops(&s3c64xx_irq_syscore_ops);
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 9c00d83f7151..be21f06e6b3f 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -29,6 +29,7 @@
#include <linux/platform_data/spi-s3c64xx.h>
+#include <plat/cpu.h>
#include "crag6410.h"
static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
@@ -399,6 +400,9 @@ static struct i2c_driver wlf_gf_module_driver = {
static int __init wlf_gf_module_register(void)
{
+ if (!soc_is_s3c64xx())
+ return 0;
+
return i2c_add_driver(&wlf_gf_module_driver);
}
device_initcall(wlf_gf_module_register);
diff --git a/arch/arm/mach-s3c64xx/pl080.c b/arch/arm/mach-s3c64xx/pl080.c
index 901a984bddc2..89c5a62830a7 100644
--- a/arch/arm/mach-s3c64xx/pl080.c
+++ b/arch/arm/mach-s3c64xx/pl080.c
@@ -14,6 +14,7 @@
#include <linux/amba/pl08x.h>
#include <linux/of.h>
+#include <plat/cpu.h>
#include <mach/irqs.h>
#include <mach/map.h>
@@ -230,6 +231,9 @@ static AMBA_AHB_DEVICE(s3c64xx_dma1, "dma-pl080s.1", 0,
static int __init s3c64xx_pl080_init(void)
{
+ if (!soc_is_s3c64xx())
+ return 0;
+
/* Set all DMA configuration to be DMA, not SDMA */
writel(0xffffff, S3C64XX_SDMA_SEL);
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index aaf7bea4032f..1451d4cda324 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -22,6 +22,7 @@
#include <mach/map.h>
#include <mach/irqs.h>
+#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/pm.h>
#include <plat/wakeup-mask.h>
@@ -330,6 +331,9 @@ int __init s3c64xx_pm_init(void)
static __init int s3c64xx_pm_initcall(void)
{
+ if (!soc_is_s3c64xx())
+ return 0;
+
pm_cpu_prep = s3c64xx_pm_prepare;
pm_cpu_sleep = s3c64xx_cpu_suspend;
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
index 1ce48c54cd9c..0789d59e6302 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -81,7 +81,7 @@ static struct device s3c6400_dev = {
static int __init s3c6400_core_init(void)
{
/* Not applicable when using DT. */
- if (of_have_populated_dt())
+ if (of_have_populated_dt() || soc_is_s3c64xx())
return 0;
return subsys_system_register(&s3c6400_subsys, NULL);
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index b2a7930548d9..273f8a1518b2 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -84,7 +84,7 @@ static struct device s3c6410_dev = {
static int __init s3c6410_core_init(void)
{
/* Not applicable when using DT. */
- if (of_have_populated_dt())
+ if (of_have_populated_dt() || !soc_is_s3c64xx())
return 0;
return subsys_system_register(&s3c6410_subsys, NULL);
diff --git a/arch/arm/plat-samsung/gpio-samsung.c b/arch/arm/plat-samsung/gpio-samsung.c
index 7c288ba4dc87..37faa8eab78f 100644
--- a/arch/arm/plat-samsung/gpio-samsung.c
+++ b/arch/arm/plat-samsung/gpio-samsung.c
@@ -1176,14 +1176,16 @@ static __init int samsung_gpiolib_init(void)
* interfaces. For legacy (non-DT) platforms this driver is used.
*/
if (of_have_populated_dt())
- return -ENODEV;
-
- samsung_gpiolib_set_cfg(samsung_gpio_cfgs, ARRAY_SIZE(samsung_gpio_cfgs));
+ return 0;
if (soc_is_s3c24xx()) {
+ samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
+ ARRAY_SIZE(samsung_gpio_cfgs));
s3c24xx_gpiolib_add_chips(s3c24xx_gpios,
ARRAY_SIZE(s3c24xx_gpios), S3C24XX_VA_GPIO);
} else if (soc_is_s3c64xx()) {
+ samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
+ ARRAY_SIZE(samsung_gpio_cfgs));
samsung_gpiolib_add_2bit_chips(s3c64xx_gpios_2bit,
ARRAY_SIZE(s3c64xx_gpios_2bit),
S3C64XX_VA_GPIO + 0xE0, 0x20);
@@ -1192,9 +1194,6 @@ static __init int samsung_gpiolib_init(void)
S3C64XX_VA_GPIO);
samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2,
ARRAY_SIZE(s3c64xx_gpios_4bit2));
- } else {
- WARN(1, "Unknown SoC in gpio-samsung, no GPIOs added\n");
- return -ENODEV;
}
return 0;
diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c
index 11fbbc26e49f..3776f7e752f0 100644
--- a/arch/arm/plat-samsung/init.c
+++ b/arch/arm/plat-samsung/init.c
@@ -152,6 +152,11 @@ static int __init s3c_arch_init(void)
{
int ret;
+ /* init is only needed for ATAGS based platforms */
+ if (!IS_ENABLED(CONFIG_ATAGS) ||
+ (!soc_is_s3c24xx() && !soc_is_s3c64xx()))
+ return 0;
+
// do the correct init for cpu
if (cpu == NULL) {
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH 04/10] ARM: s3c64xx: prepare initcalls for multiplatform
@ 2015-03-02 12:35 ` Arnd Bergmann
0 siblings, 0 replies; 43+ messages in thread
From: Arnd Bergmann @ 2015-03-02 12:35 UTC (permalink / raw)
To: linux-arm-kernel
In a multiplatform kernel, each initcall is run regardless
of the platform it is meant for, so it must not attempt to
access SoC-specific registers.
This adds 'if (soc_is_s3c64xx)' to all initcalls that are
specific to the s3c64xx platform, to prevent them from breaking
other platforms once we can build them into a combined kernel.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-s3c64xx/common.c | 4 ++--
arch/arm/mach-s3c64xx/cpuidle.c | 5 ++++-
arch/arm/mach-s3c64xx/irq-pm.c | 2 +-
arch/arm/mach-s3c64xx/mach-crag6410-module.c | 4 ++++
arch/arm/mach-s3c64xx/pl080.c | 4 ++++
arch/arm/mach-s3c64xx/pm.c | 4 ++++
arch/arm/mach-s3c64xx/s3c6400.c | 2 +-
arch/arm/mach-s3c64xx/s3c6410.c | 2 +-
arch/arm/plat-samsung/gpio-samsung.c | 11 +++++------
arch/arm/plat-samsung/init.c | 5 +++++
10 files changed, 31 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index 16547f2641a3..cca29aa49fd3 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -209,7 +209,7 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
static __init int s3c64xx_dev_init(void)
{
/* Not applicable when using DT. */
- if (of_have_populated_dt())
+ if (of_have_populated_dt() || !soc_is_s3c64xx())
return 0;
subsys_system_register(&s3c64xx_subsys, NULL);
@@ -414,7 +414,7 @@ static int __init s3c64xx_init_irq_eint(void)
int irq;
/* On DT-enabled systems EINTs are handled by pinctrl-s3c64xx driver. */
- if (of_have_populated_dt())
+ if (of_have_populated_dt() || !soc_is_s3c64xx())
return -ENODEV;
for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-s3c64xx/cpuidle.c
index 2eb072440dfa..92b41c2b7314 100644
--- a/arch/arm/mach-s3c64xx/cpuidle.c
+++ b/arch/arm/mach-s3c64xx/cpuidle.c
@@ -18,6 +18,7 @@
#include <asm/proc-fns.h>
+#include <plat/cpu.h>
#include <mach/map.h>
#include "regs-sys.h"
@@ -57,6 +58,8 @@ static struct cpuidle_driver s3c64xx_cpuidle_driver = {
static int __init s3c64xx_init_cpuidle(void)
{
- return cpuidle_register(&s3c64xx_cpuidle_driver, NULL);
+ if (soc_is_s3c64xx())
+ return cpuidle_register(&s3c64xx_cpuidle_driver, NULL);
+ return 0;
}
device_initcall(s3c64xx_init_cpuidle);
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
index ae4ea7601f60..0bbf1faaee42 100644
--- a/arch/arm/mach-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -113,7 +113,7 @@ static struct syscore_ops s3c64xx_irq_syscore_ops = {
static __init int s3c64xx_syscore_init(void)
{
/* Appropriate drivers (pinctrl, uart) handle this when using DT. */
- if (of_have_populated_dt())
+ if (of_have_populated_dt() || !soc_is_s3c64xx())
return 0;
register_syscore_ops(&s3c64xx_irq_syscore_ops);
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 9c00d83f7151..be21f06e6b3f 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -29,6 +29,7 @@
#include <linux/platform_data/spi-s3c64xx.h>
+#include <plat/cpu.h>
#include "crag6410.h"
static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
@@ -399,6 +400,9 @@ static struct i2c_driver wlf_gf_module_driver = {
static int __init wlf_gf_module_register(void)
{
+ if (!soc_is_s3c64xx())
+ return 0;
+
return i2c_add_driver(&wlf_gf_module_driver);
}
device_initcall(wlf_gf_module_register);
diff --git a/arch/arm/mach-s3c64xx/pl080.c b/arch/arm/mach-s3c64xx/pl080.c
index 901a984bddc2..89c5a62830a7 100644
--- a/arch/arm/mach-s3c64xx/pl080.c
+++ b/arch/arm/mach-s3c64xx/pl080.c
@@ -14,6 +14,7 @@
#include <linux/amba/pl08x.h>
#include <linux/of.h>
+#include <plat/cpu.h>
#include <mach/irqs.h>
#include <mach/map.h>
@@ -230,6 +231,9 @@ static AMBA_AHB_DEVICE(s3c64xx_dma1, "dma-pl080s.1", 0,
static int __init s3c64xx_pl080_init(void)
{
+ if (!soc_is_s3c64xx())
+ return 0;
+
/* Set all DMA configuration to be DMA, not SDMA */
writel(0xffffff, S3C64XX_SDMA_SEL);
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index aaf7bea4032f..1451d4cda324 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -22,6 +22,7 @@
#include <mach/map.h>
#include <mach/irqs.h>
+#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/pm.h>
#include <plat/wakeup-mask.h>
@@ -330,6 +331,9 @@ int __init s3c64xx_pm_init(void)
static __init int s3c64xx_pm_initcall(void)
{
+ if (!soc_is_s3c64xx())
+ return 0;
+
pm_cpu_prep = s3c64xx_pm_prepare;
pm_cpu_sleep = s3c64xx_cpu_suspend;
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
index 1ce48c54cd9c..0789d59e6302 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -81,7 +81,7 @@ static struct device s3c6400_dev = {
static int __init s3c6400_core_init(void)
{
/* Not applicable when using DT. */
- if (of_have_populated_dt())
+ if (of_have_populated_dt() || soc_is_s3c64xx())
return 0;
return subsys_system_register(&s3c6400_subsys, NULL);
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index b2a7930548d9..273f8a1518b2 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -84,7 +84,7 @@ static struct device s3c6410_dev = {
static int __init s3c6410_core_init(void)
{
/* Not applicable when using DT. */
- if (of_have_populated_dt())
+ if (of_have_populated_dt() || !soc_is_s3c64xx())
return 0;
return subsys_system_register(&s3c6410_subsys, NULL);
diff --git a/arch/arm/plat-samsung/gpio-samsung.c b/arch/arm/plat-samsung/gpio-samsung.c
index 7c288ba4dc87..37faa8eab78f 100644
--- a/arch/arm/plat-samsung/gpio-samsung.c
+++ b/arch/arm/plat-samsung/gpio-samsung.c
@@ -1176,14 +1176,16 @@ static __init int samsung_gpiolib_init(void)
* interfaces. For legacy (non-DT) platforms this driver is used.
*/
if (of_have_populated_dt())
- return -ENODEV;
-
- samsung_gpiolib_set_cfg(samsung_gpio_cfgs, ARRAY_SIZE(samsung_gpio_cfgs));
+ return 0;
if (soc_is_s3c24xx()) {
+ samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
+ ARRAY_SIZE(samsung_gpio_cfgs));
s3c24xx_gpiolib_add_chips(s3c24xx_gpios,
ARRAY_SIZE(s3c24xx_gpios), S3C24XX_VA_GPIO);
} else if (soc_is_s3c64xx()) {
+ samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
+ ARRAY_SIZE(samsung_gpio_cfgs));
samsung_gpiolib_add_2bit_chips(s3c64xx_gpios_2bit,
ARRAY_SIZE(s3c64xx_gpios_2bit),
S3C64XX_VA_GPIO + 0xE0, 0x20);
@@ -1192,9 +1194,6 @@ static __init int samsung_gpiolib_init(void)
S3C64XX_VA_GPIO);
samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2,
ARRAY_SIZE(s3c64xx_gpios_4bit2));
- } else {
- WARN(1, "Unknown SoC in gpio-samsung, no GPIOs added\n");
- return -ENODEV;
}
return 0;
diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c
index 11fbbc26e49f..3776f7e752f0 100644
--- a/arch/arm/plat-samsung/init.c
+++ b/arch/arm/plat-samsung/init.c
@@ -152,6 +152,11 @@ static int __init s3c_arch_init(void)
{
int ret;
+ /* init is only needed for ATAGS based platforms */
+ if (!IS_ENABLED(CONFIG_ATAGS) ||
+ (!soc_is_s3c24xx() && !soc_is_s3c64xx()))
+ return 0;
+
// do the correct init for cpu
if (cpu == NULL) {
--
2.1.0.rc2
^ permalink raw reply related [flat|nested] 43+ messages in thread
end of thread, other threads:[~2015-12-01 15:34 UTC | newest]
Thread overview: 43+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-11-25 16:06 [PATCH 00/10] ARM: s3c64xx multiplatform Arnd Bergmann
2015-11-25 16:06 ` Arnd Bergmann
2015-11-25 16:06 ` [PATCH 01/10] Input: s3c2410_ts: fix S3C_ADC dependency Arnd Bergmann
2015-11-25 16:06 ` Arnd Bergmann
2015-11-25 16:06 ` Arnd Bergmann
2015-11-30 23:48 ` Krzysztof Kozlowski
2015-11-30 23:48 ` Krzysztof Kozlowski
2015-11-25 16:06 ` [PATCH 02/10] ASoC: samsung/smartq: use dynamic registration Arnd Bergmann
2015-11-25 16:06 ` Arnd Bergmann
2015-12-01 0:24 ` Krzysztof Kozlowski
2015-12-01 0:24 ` Krzysztof Kozlowski
2015-12-01 15:11 ` Arnd Bergmann
2015-12-01 15:11 ` Arnd Bergmann
2015-11-25 16:06 ` [PATCH 03/10] gpio: samsung: move gpio-samsung driver back to platform code Arnd Bergmann
2015-11-25 16:06 ` Arnd Bergmann
2015-12-01 0:34 ` Krzysztof Kozlowski
2015-12-01 0:34 ` Krzysztof Kozlowski
2015-12-01 15:33 ` Arnd Bergmann
2015-12-01 15:33 ` Arnd Bergmann
2015-11-25 16:06 ` [PATCH 04/10] ARM: s3c64xx: prepare initcalls for multiplatform Arnd Bergmann
2015-11-25 16:06 ` Arnd Bergmann
2015-12-01 1:23 ` Krzysztof Kozlowski
2015-12-01 1:23 ` Krzysztof Kozlowski
2015-11-25 16:06 ` [PATCH 05/10] ARM: s3c64xx: enable sparse IRQ support Arnd Bergmann
2015-11-25 16:06 ` Arnd Bergmann
2015-11-25 16:06 ` [PATCH 06/10] iio: exynos-adc: add experimental touchscreen support Arnd Bergmann
2015-11-25 16:06 ` Arnd Bergmann
2015-11-25 16:06 ` [PATCH 07/10] ARM: s3c64xx: use new adc/touchscreen driver Arnd Bergmann
2015-11-25 16:06 ` Arnd Bergmann
2015-11-25 16:06 ` Arnd Bergmann
2015-11-25 16:06 ` [PATCH 08/10] ARM: s3c64xx: use common debug-ll implementation Arnd Bergmann
2015-11-25 16:06 ` Arnd Bergmann
2015-11-25 16:06 ` [PATCH 09/10] ARM: s3c64xx: multiplatform support Arnd Bergmann
2015-11-25 16:06 ` Arnd Bergmann
2015-11-25 16:06 ` [PATCH 10/10] ARM: s3c64xx: allow building without board support Arnd Bergmann
2015-11-25 16:06 ` Arnd Bergmann
2015-11-25 16:06 ` Arnd Bergmann
2015-11-25 16:31 ` [PATCH 00/10] ARM: s3c64xx multiplatform Mark Brown
2015-11-25 16:31 ` Mark Brown
2015-11-25 16:33 ` Arnd Bergmann
2015-11-25 16:33 ` Arnd Bergmann
-- strict thread matches above, loose matches on Subject: below --
2015-03-02 12:35 [PATCH 00/10] ARM: s3c64xx multiplatform, help needed Arnd Bergmann
2015-03-02 12:35 ` [PATCH 04/10] ARM: s3c64xx: prepare initcalls for multiplatform Arnd Bergmann
2015-03-02 12:35 ` Arnd Bergmann
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.