All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jaedon Shin <jaedon.shin@gmail.com>
To: Tejun Heo <tj@kernel.org>, Kishon Vijay Abraham I <kishon@ti.com>,
	Rob Herring <robh+dt@kernel.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	linux-ide@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>,
	Dragan Stancevic <dragan.stancevic@gmail.com>,
	Jaedon Shin <jaedon.shin@gmail.com>
Subject: [v6 1/7] ata: ahci_brcmstb: add support for MIPS-based platforms
Date: Thu, 26 Nov 2015 11:56:29 +0900	[thread overview]
Message-ID: <1448506595-4981-2-git-send-email-jaedon.shin@gmail.com> (raw)
In-Reply-To: <1448506595-4981-1-git-send-email-jaedon.shin@gmail.com>

The BCM7xxx ARM-based and MIPS-based platforms share a similar hardware
block for AHCI SATA3.

This new compatible string, "brcm,bcm7425-ahci", may be used for most
MIPS-based platforms of 40nm process technology.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
---
 Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt | 4 +++-
 drivers/ata/Kconfig                                         | 2 +-
 drivers/ata/ahci_brcmstb.c                                  | 1 +
 3 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt b/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt
index 20ac9bbfa1fd..60872838f1ad 100644
--- a/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt
+++ b/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt
@@ -4,7 +4,9 @@ SATA nodes are defined to describe on-chip Serial ATA controllers.
 Each SATA controller should have its own node.
 
 Required properties:
-- compatible         : compatible list, may contain "brcm,bcm7445-ahci" and/or
+- compatible         : should be one or more of
+                       "brcm,bcm7425-ahci"
+                       "brcm,bcm7445-ahci"
                        "brcm,sata3-ahci"
 - reg                : register mappings for AHCI and SATA_TOP_CTRL
 - reg-names          : "ahci" and "top-ctrl"
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 6aaa3f81755b..861643ea91b5 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -100,7 +100,7 @@ config SATA_AHCI_PLATFORM
 
 config AHCI_BRCMSTB
 	tristate "Broadcom STB AHCI SATA support"
-	depends on ARCH_BRCMSTB
+	depends on ARCH_BRCMSTB || BMIPS_GENERIC
 	help
 	  This option enables support for the AHCI SATA3 controller found on
 	  STB SoC's.
diff --git a/drivers/ata/ahci_brcmstb.c b/drivers/ata/ahci_brcmstb.c
index 14b7305d2ba0..73e3b0b2a3c2 100644
--- a/drivers/ata/ahci_brcmstb.c
+++ b/drivers/ata/ahci_brcmstb.c
@@ -300,6 +300,7 @@ static int brcm_ahci_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id ahci_of_match[] = {
+	{.compatible = "brcm,bcm7425-ahci"},
 	{.compatible = "brcm,bcm7445-ahci"},
 	{},
 };
-- 
2.6.3


  reply	other threads:[~2015-11-26  2:56 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-26  2:56 [v6 0/7] add support SATA for BMIPS_GENERIC Jaedon Shin
2015-11-26  2:56 ` Jaedon Shin [this message]
2015-11-26  2:56 ` [v6 2/7] ata: ahci_brcmstb: disable NCQ for MIPS-based platforms Jaedon Shin
2015-11-26  2:56 ` [v6 3/7] ata: ahci_brcmstb: add a quirk " Jaedon Shin
2015-11-26  2:56 ` [v6 4/7] ata: ahci_brcmstb: remove unused definitions Jaedon Shin
2015-11-30 14:58   ` Tejun Heo
2015-11-26  2:56 ` [v6 5/7] phy: phy_brcmstb_sata: remove duplicate definitions Jaedon Shin
2015-11-26  2:56 ` [v6 6/7] phy: phy_brcmstb_sata: add data for phy version Jaedon Shin
2015-11-26 11:05   ` Sergei Shtylyov
2015-12-15 10:46     ` Kishon Vijay Abraham I
2015-12-15 11:23       ` Jaedon Shin
2015-12-17  0:46         ` Florian Fainelli
2015-11-26  2:56 ` [v6 7/7] phy: phy_brcmstb_sata: add support for MIPS-based platforms Jaedon Shin
2015-12-20 12:01 ` [v6 0/7] add support SATA for BMIPS_GENERIC Kishon Vijay Abraham I
2015-12-24 17:52   ` Florian Fainelli
2015-12-28 15:56     ` Tejun Heo
2016-01-01  2:21       ` Tejun Heo
2016-01-01  2:34         ` Jaedon Shin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1448506595-4981-2-git-send-email-jaedon.shin@gmail.com \
    --to=jaedon.shin@gmail.com \
    --cc=computersforpeace@gmail.com \
    --cc=dragan.stancevic@gmail.com \
    --cc=f.fainelli@gmail.com \
    --cc=kishon@ti.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=ralf@linux-mips.org \
    --cc=robh+dt@kernel.org \
    --cc=tj@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.