All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Andrew F. Davis" <afd@ti.com>
To: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	Jonathan Cameron <jic23@kernel.org>,
	Hartmut Knaack <knaack.h@gmx.de>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald <pmeerw@pmeerw.net>
Cc: devicetree@vger.kernel.org, linux-iio@vger.kernel.org,
	linux-api@vger.kernel.org, linux-kernel@vger.kernel.org, Andrew
Subject: [PATCH v3 2/5] Documentation: afe4404: Add DT bindings for the AFE4404 heart monitor
Date: Mon, 14 Dec 2015 16:35:58 -0600	[thread overview]
Message-ID: <1450132561-5245-3-git-send-email-afd@ti.com> (raw)
In-Reply-To: <1450132561-5245-1-git-send-email-afd@ti.com>

Add the TI afe4404 heart monitor DT bindings documentation.
Create health directory created under iio.

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 .../devicetree/bindings/iio/health/afe4404.txt     | 30 ++++++++++++++++++++++
 1 file changed, 30 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/health/afe4404.txt

diff --git a/Documentation/devicetree/bindings/iio/health/afe4404.txt b/Documentation/devicetree/bindings/iio/health/afe4404.txt
new file mode 100644
index 0000000..de69f20
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/health/afe4404.txt
@@ -0,0 +1,30 @@
+Texas Instruments AFE4404 Heart rate and Pulse Oximeter
+
+Required properties:
+ - compatible		: Should be "ti,afe4404".
+ - reg			: I2C address of the device.
+ - tx-supply		: Regulator supply to transmitting LEDs.
+ - interrupt-parent	: Phandle to he parent interrupt controller.
+ - interrupts		: The interrupt line the device ADC_RDY pin is
+			  connected to. For details refer to,
+			  ../interrupt-controller/interrupts.txt.
+
+Optional properties:
+ - reset-gpios		: GPIO used to reset the device.
+			  For details refer to, ../gpio/gpio.txt.
+
+Example:
+
+&i2c2 {
+	heart_mon@58 {
+		compatible = "ti,afe4404";
+		reg = <0x58>;
+
+		tx-supply = <&vbat>;
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <28 IRQ_TYPE_EDGE_RISING>;
+
+		reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+	};
+};
-- 
2.6.4

WARNING: multiple messages have this Message-ID (diff)
From: "Andrew F. Davis" <afd@ti.com>
To: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	Jonathan Cameron <jic23@kernel.org>,
	Hartmut Knaack <knaack.h@gmx.de>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald <pmeerw@pmeerw.net>
Cc: <devicetree@vger.kernel.org>, <linux-iio@vger.kernel.org>,
	<linux-api@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	"Andrew F. Davis" <afd@ti.com>
Subject: [PATCH v3 2/5] Documentation: afe4404: Add DT bindings for the AFE4404 heart monitor
Date: Mon, 14 Dec 2015 16:35:58 -0600	[thread overview]
Message-ID: <1450132561-5245-3-git-send-email-afd@ti.com> (raw)
In-Reply-To: <1450132561-5245-1-git-send-email-afd@ti.com>

Add the TI afe4404 heart monitor DT bindings documentation.
Create health directory created under iio.

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 .../devicetree/bindings/iio/health/afe4404.txt     | 30 ++++++++++++++++++++++
 1 file changed, 30 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/health/afe4404.txt

diff --git a/Documentation/devicetree/bindings/iio/health/afe4404.txt b/Documentation/devicetree/bindings/iio/health/afe4404.txt
new file mode 100644
index 0000000..de69f20
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/health/afe4404.txt
@@ -0,0 +1,30 @@
+Texas Instruments AFE4404 Heart rate and Pulse Oximeter
+
+Required properties:
+ - compatible		: Should be "ti,afe4404".
+ - reg			: I2C address of the device.
+ - tx-supply		: Regulator supply to transmitting LEDs.
+ - interrupt-parent	: Phandle to he parent interrupt controller.
+ - interrupts		: The interrupt line the device ADC_RDY pin is
+			  connected to. For details refer to,
+			  ../interrupt-controller/interrupts.txt.
+
+Optional properties:
+ - reset-gpios		: GPIO used to reset the device.
+			  For details refer to, ../gpio/gpio.txt.
+
+Example:
+
+&i2c2 {
+	heart_mon@58 {
+		compatible = "ti,afe4404";
+		reg = <0x58>;
+
+		tx-supply = <&vbat>;
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <28 IRQ_TYPE_EDGE_RISING>;
+
+		reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+	};
+};
-- 
2.6.4

  parent reply	other threads:[~2015-12-14 22:35 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-14 22:35 [PATCH v3 0/5] iio: AFE4404 Heart Rate Monitor and Bio-Sensing Andrew F. Davis
2015-12-14 22:35 ` Andrew F. Davis
2015-12-14 22:35 ` [PATCH v3 1/5] iio: Make IIO value formating function globally available Andrew F. Davis
2015-12-14 22:35   ` Andrew F. Davis
2015-12-22 17:05   ` Jonathan Cameron
2015-12-22 17:05     ` Jonathan Cameron
2015-12-14 22:35 ` Andrew F. Davis [this message]
2015-12-14 22:35   ` [PATCH v3 2/5] Documentation: afe4404: Add DT bindings for the AFE4404 heart monitor Andrew F. Davis
2015-12-14 22:35 ` [PATCH v3 3/5] iio: health: Add driver for the TI " Andrew F. Davis
2015-12-14 22:35   ` Andrew F. Davis
2015-12-22 17:37   ` Jonathan Cameron
2015-12-22 17:37     ` Jonathan Cameron
2015-12-30 17:23     ` Andrew F. Davis
2015-12-30 17:23       ` Andrew F. Davis
2015-12-14 22:36 ` [PATCH v3 4/5] Documentation: afe4403: Add DT bindings for the AFE4403 " Andrew F. Davis
2015-12-14 22:36   ` Andrew F. Davis
2015-12-22 17:38   ` Jonathan Cameron
2015-12-14 22:36 ` [PATCH v3 5/5] iio: health: Add driver for the TI " Andrew F. Davis
2015-12-14 22:36   ` Andrew F. Davis
2015-12-22 17:59   ` Jonathan Cameron
2015-12-22 17:59     ` Jonathan Cameron
2015-12-30 17:34     ` Andrew F. Davis
2015-12-30 17:34       ` Andrew F. Davis

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1450132561-5245-3-git-send-email-afd@ti.com \
    --to=afd@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=jic23@kernel.org \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-api@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=pmeerw@pmeerw.net \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.