* [PATCH V10 0/7] dma: add Qualcomm Technologies HIDMA driver
@ 2015-12-17 17:01 ` Sinan Kaya
0 siblings, 0 replies; 35+ messages in thread
From: Sinan Kaya @ 2015-12-17 17:01 UTC (permalink / raw)
To: linux-arm-kernel
The Qualcomm Technologies HIDMA device has been designed
to support virtualization technology. The driver has been
divided into two to follow the hardware design.
1. HIDMA Management driver
2. HIDMA Channel driver
Each HIDMA HW consists of multiple channels. These channels
share some set of common parameters. These parameters are
initialized by the management driver during power up.
Same management driver is used for monitoring the execution
of the channels. Management driver can change the performance
behavior dynamically such as bandwidth allocation and
prioritization in the future.
The management driver is executed in hypervisor context and
is the main management entity for all channels provided by
the device.
Changes from V9: (https://lkml.org/lkml/2015/12/11/584)
* none
Changes from V9: (https://lkml.org/lkml/2015/12/11/585)
* split device tree documentation from code
* correct syntax error in device tree documentation
* describe max value of the weight
* document that array and weight attributes are array
* add object hierarchy support
* move sysfs priority and weight files into chanops directory.
Changes from V9: (https://lkml.org/lkml/2015/12/11/588)
* add object hierarchy support
* rename event-channel to channel-index
* create a sysfs entry for channel-index
* add pm_runtime_get/sync around hidma_ll_isenabled
Changes from V9: (https://lkml.org/lkml/2015/12/11/586)
* rename TRE chidx to idx to not mix with the channel id.
Changes from V9: (https://lkml.org/lkml/2015/12/11/587)
* none
Sinan Kaya (7):
dma: qcom_bam_dma: move to qcom directory
dma: hidma: Add Device Tree support
dma: add Qualcomm Technologies HIDMA management driver
dma: add Qualcomm Technologies HIDMA channel driver
dma: qcom_hidma: implement lower level hardware interface
dma: qcom_hidma: add debugfs hooks
dma: qcom_hidma: add support for object hierarchy
Documentation/ABI/testing/sysfs-platform-hidma | 9 +
.../ABI/testing/sysfs-platform-hidma-mgmt | 97 +++
.../devicetree/bindings/dma/qcom_hidma_mgmt.txt | 79 ++
drivers/dma/Kconfig | 11 +-
drivers/dma/Makefile | 2 +-
drivers/dma/qcom/Kconfig | 29 +
drivers/dma/qcom/Makefile | 4 +
drivers/dma/{qcom_bam_dma.c => qcom/bam_dma.c} | 4 +-
drivers/dma/qcom/hidma.c | 868 +++++++++++++++++++
drivers/dma/qcom/hidma.h | 163 ++++
drivers/dma/qcom/hidma_dbg.c | 219 +++++
drivers/dma/qcom/hidma_ll.c | 927 +++++++++++++++++++++
drivers/dma/qcom/hidma_mgmt.c | 317 +++++++
drivers/dma/qcom/hidma_mgmt.h | 39 +
drivers/dma/qcom/hidma_mgmt_sys.c | 295 +++++++
15 files changed, 3051 insertions(+), 12 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-platform-hidma
create mode 100644 Documentation/ABI/testing/sysfs-platform-hidma-mgmt
create mode 100644 Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
create mode 100644 drivers/dma/qcom/Kconfig
create mode 100644 drivers/dma/qcom/Makefile
rename drivers/dma/{qcom_bam_dma.c => qcom/bam_dma.c} (99%)
create mode 100644 drivers/dma/qcom/hidma.c
create mode 100644 drivers/dma/qcom/hidma.h
create mode 100644 drivers/dma/qcom/hidma_dbg.c
create mode 100644 drivers/dma/qcom/hidma_ll.c
create mode 100644 drivers/dma/qcom/hidma_mgmt.c
create mode 100644 drivers/dma/qcom/hidma_mgmt.h
create mode 100644 drivers/dma/qcom/hidma_mgmt_sys.c
--
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 35+ messages in thread* [PATCH V10 1/7] dma: qcom_bam_dma: move to qcom directory
2015-12-17 17:01 ` Sinan Kaya
@ 2015-12-17 17:01 ` Sinan Kaya
-1 siblings, 0 replies; 35+ messages in thread
From: Sinan Kaya @ 2015-12-17 17:01 UTC (permalink / raw)
To: dmaengine, mark.rutland, timur, devicetree, cov, vinod.koul, jcm
Cc: agross, arnd, linux-arm-msm, linux-arm-kernel, Sinan Kaya, linux-kernel
Creating a QCOM directory for all QCOM DMA source files.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Reviewed-by: Andy Gtoss <agross@codeaurora.org>
---
drivers/dma/Kconfig | 11 ++---------
drivers/dma/Makefile | 2 +-
drivers/dma/qcom/Kconfig | 8 ++++++++
drivers/dma/qcom/Makefile | 1 +
drivers/dma/{qcom_bam_dma.c => qcom/bam_dma.c} | 4 ++--
5 files changed, 14 insertions(+), 12 deletions(-)
create mode 100644 drivers/dma/qcom/Kconfig
create mode 100644 drivers/dma/qcom/Makefile
rename drivers/dma/{qcom_bam_dma.c => qcom/bam_dma.c} (99%)
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index b458475..47b1b98 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -408,15 +408,6 @@ config PXA_DMA
16 to 32 channels for peripheral to memory or memory to memory
transfers.
-config QCOM_BAM_DMA
- tristate "QCOM BAM DMA support"
- depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
- select DMA_ENGINE
- select DMA_VIRTUAL_CHANNELS
- ---help---
- Enable support for the QCOM BAM DMA controller. This controller
- provides DMA capabilities for a variety of on-chip devices.
-
config SIRF_DMA
tristate "CSR SiRFprimaII/SiRFmarco DMA support"
depends on ARCH_SIRF
@@ -527,6 +518,8 @@ config ZX_DMA
# driver files
source "drivers/dma/bestcomm/Kconfig"
+source "drivers/dma/qcom/Kconfig"
+
source "drivers/dma/dw/Kconfig"
source "drivers/dma/hsu/Kconfig"
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 7711a71..8dba90d 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -52,7 +52,6 @@ obj-$(CONFIG_PCH_DMA) += pch_dma.o
obj-$(CONFIG_PL330_DMA) += pl330.o
obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
obj-$(CONFIG_PXA_DMA) += pxa_dma.o
-obj-$(CONFIG_QCOM_BAM_DMA) += qcom_bam_dma.o
obj-$(CONFIG_RENESAS_DMA) += sh/
obj-$(CONFIG_SIRF_DMA) += sirf-dma.o
obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o
@@ -66,4 +65,5 @@ obj-$(CONFIG_TI_EDMA) += edma.o
obj-$(CONFIG_XGENE_DMA) += xgene-dma.o
obj-$(CONFIG_ZX_DMA) += zx296702_dma.o
+obj-y += qcom/
obj-y += xilinx/
diff --git a/drivers/dma/qcom/Kconfig b/drivers/dma/qcom/Kconfig
new file mode 100644
index 0000000..f17c272
--- /dev/null
+++ b/drivers/dma/qcom/Kconfig
@@ -0,0 +1,8 @@
+config QCOM_BAM_DMA
+ tristate "QCOM BAM DMA support"
+ depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
+ select DMA_ENGINE
+ select DMA_VIRTUAL_CHANNELS
+ ---help---
+ Enable support for the QCOM BAM DMA controller. This controller
+ provides DMA capabilities for a variety of on-chip devices.
diff --git a/drivers/dma/qcom/Makefile b/drivers/dma/qcom/Makefile
new file mode 100644
index 0000000..f612ae3
--- /dev/null
+++ b/drivers/dma/qcom/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_QCOM_BAM_DMA) += bam_dma.o
diff --git a/drivers/dma/qcom_bam_dma.c b/drivers/dma/qcom/bam_dma.c
similarity index 99%
rename from drivers/dma/qcom_bam_dma.c
rename to drivers/dma/qcom/bam_dma.c
index 5a250cd..b6f053d 100644
--- a/drivers/dma/qcom_bam_dma.c
+++ b/drivers/dma/qcom/bam_dma.c
@@ -49,8 +49,8 @@
#include <linux/clk.h>
#include <linux/dmaengine.h>
-#include "dmaengine.h"
-#include "virt-dma.h"
+#include "../dmaengine.h"
+#include "../virt-dma.h"
struct bam_desc_hw {
u32 addr; /* Buffer physical address */
--
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH V10 1/7] dma: qcom_bam_dma: move to qcom directory
@ 2015-12-17 17:01 ` Sinan Kaya
0 siblings, 0 replies; 35+ messages in thread
From: Sinan Kaya @ 2015-12-17 17:01 UTC (permalink / raw)
To: linux-arm-kernel
Creating a QCOM directory for all QCOM DMA source files.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Reviewed-by: Andy Gtoss <agross@codeaurora.org>
---
drivers/dma/Kconfig | 11 ++---------
drivers/dma/Makefile | 2 +-
drivers/dma/qcom/Kconfig | 8 ++++++++
drivers/dma/qcom/Makefile | 1 +
drivers/dma/{qcom_bam_dma.c => qcom/bam_dma.c} | 4 ++--
5 files changed, 14 insertions(+), 12 deletions(-)
create mode 100644 drivers/dma/qcom/Kconfig
create mode 100644 drivers/dma/qcom/Makefile
rename drivers/dma/{qcom_bam_dma.c => qcom/bam_dma.c} (99%)
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index b458475..47b1b98 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -408,15 +408,6 @@ config PXA_DMA
16 to 32 channels for peripheral to memory or memory to memory
transfers.
-config QCOM_BAM_DMA
- tristate "QCOM BAM DMA support"
- depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
- select DMA_ENGINE
- select DMA_VIRTUAL_CHANNELS
- ---help---
- Enable support for the QCOM BAM DMA controller. This controller
- provides DMA capabilities for a variety of on-chip devices.
-
config SIRF_DMA
tristate "CSR SiRFprimaII/SiRFmarco DMA support"
depends on ARCH_SIRF
@@ -527,6 +518,8 @@ config ZX_DMA
# driver files
source "drivers/dma/bestcomm/Kconfig"
+source "drivers/dma/qcom/Kconfig"
+
source "drivers/dma/dw/Kconfig"
source "drivers/dma/hsu/Kconfig"
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 7711a71..8dba90d 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -52,7 +52,6 @@ obj-$(CONFIG_PCH_DMA) += pch_dma.o
obj-$(CONFIG_PL330_DMA) += pl330.o
obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
obj-$(CONFIG_PXA_DMA) += pxa_dma.o
-obj-$(CONFIG_QCOM_BAM_DMA) += qcom_bam_dma.o
obj-$(CONFIG_RENESAS_DMA) += sh/
obj-$(CONFIG_SIRF_DMA) += sirf-dma.o
obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o
@@ -66,4 +65,5 @@ obj-$(CONFIG_TI_EDMA) += edma.o
obj-$(CONFIG_XGENE_DMA) += xgene-dma.o
obj-$(CONFIG_ZX_DMA) += zx296702_dma.o
+obj-y += qcom/
obj-y += xilinx/
diff --git a/drivers/dma/qcom/Kconfig b/drivers/dma/qcom/Kconfig
new file mode 100644
index 0000000..f17c272
--- /dev/null
+++ b/drivers/dma/qcom/Kconfig
@@ -0,0 +1,8 @@
+config QCOM_BAM_DMA
+ tristate "QCOM BAM DMA support"
+ depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
+ select DMA_ENGINE
+ select DMA_VIRTUAL_CHANNELS
+ ---help---
+ Enable support for the QCOM BAM DMA controller. This controller
+ provides DMA capabilities for a variety of on-chip devices.
diff --git a/drivers/dma/qcom/Makefile b/drivers/dma/qcom/Makefile
new file mode 100644
index 0000000..f612ae3
--- /dev/null
+++ b/drivers/dma/qcom/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_QCOM_BAM_DMA) += bam_dma.o
diff --git a/drivers/dma/qcom_bam_dma.c b/drivers/dma/qcom/bam_dma.c
similarity index 99%
rename from drivers/dma/qcom_bam_dma.c
rename to drivers/dma/qcom/bam_dma.c
index 5a250cd..b6f053d 100644
--- a/drivers/dma/qcom_bam_dma.c
+++ b/drivers/dma/qcom/bam_dma.c
@@ -49,8 +49,8 @@
#include <linux/clk.h>
#include <linux/dmaengine.h>
-#include "dmaengine.h"
-#include "virt-dma.h"
+#include "../dmaengine.h"
+#include "../virt-dma.h"
struct bam_desc_hw {
u32 addr; /* Buffer physical address */
--
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [PATCH V10 2/7] dma: hidma: Add Device Tree support
2015-12-17 17:01 ` Sinan Kaya
@ 2015-12-17 17:01 ` Sinan Kaya
-1 siblings, 0 replies; 35+ messages in thread
From: Sinan Kaya @ 2015-12-17 17:01 UTC (permalink / raw)
To: dmaengine, mark.rutland, timur, devicetree, cov, vinod.koul, jcm
Cc: agross, arnd, linux-arm-msm, linux-arm-kernel, Sinan Kaya, linux-kernel
Add documentation for the Qualcomm Technologies HIDMA driver.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
.../devicetree/bindings/dma/qcom_hidma_mgmt.txt | 79 ++++++++++++++++++++++
1 file changed, 79 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
diff --git a/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt b/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
new file mode 100644
index 0000000..0e6ed1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
@@ -0,0 +1,79 @@
+Qualcomm Technologies HIDMA Management interface
+
+Qualcomm Technologies HIDMA is a high speed DMA device. It only supports
+memcpy and memset capabilities. It has been designed for virtualized
+environments.
+
+Each HIDMA HW instance consists of multiple DMA channels. These channels
+share the same bandwidth. The bandwidth utilization can be parititioned
+among channels based on the priority and weight assignments.
+
+There are only two priority levels and 15 weigh assignments possible.
+
+Other parameters here determine how much of the system bus this HIDMA
+instance can use like maximum read/write request and and number of bytes to
+read/write in a single burst.
+
+Main node required properties:
+- compatible: "qcom,hidma-mgmt-1.0";
+- reg: Address range for DMA device
+- dma-channels: Number of channels supported by this DMA controller.
+- max-write-burst-bytes: Maximum write burst in bytes. A memcpy requested is
+ fragmented to multiples of this amount.
+- max-read-burst-bytes: Maximum read burst in bytes. A memcpy request is
+ fragmented to multiples of this amount.
+- max-write-transactions: Maximum write transactions to perform in a burst
+- max-read-transactions: Maximum read transactions to perform in a burst
+- channel-reset-timeout-cycles: Channel reset timeout in cycles for this SOC.
+
+Sub-nodes:
+
+HIDMA has one or more DMA channels that are used to move data from one
+memory location to another.
+
+Each DMA channel is described as a sub-node under the management object.
+When a transfer channel is given to the guest operating system, only the channel
+object is created. The drivers have support for both flat and hierarchical
+configuration.
+
+Required properties:
+- compatible: must contain "qcom,hidma-1.0"
+- reg: Addresses for the transfer and event channel
+- interrupts: Should contain the event interrupt
+- desc-count: Number of asynchronous requests this channel can handle
+- channel-index: The HW event channel completions will be delivered.
+
+Example:
+
+Hypervisor OS configuration:
+
+ hidma-mgmt@f9984000 = {
+ compatible = "qcom,hidma-mgmt-1.0";
+ reg = <0xf9984000 0x15000>;
+ dma-channels = <6>;
+ max-write-burst-bytes = <1024>;
+ max-read-burst-bytes = <1024>;
+ max-write-transactions = <31>;
+ max-read-transactions = <31>;
+ channel-reset-timeout-cycles = <0x500>;
+
+ hidma_24: dma-controller@0x5c050000 {
+ compatible = "qcom,hidma-1.0";
+ reg = <0 0x5c050000 0x0 0x1000>,
+ <0 0x5c0b0000 0x0 0x1000>;
+ interrupts = <0 389 0>;
+ desc-count = <10>;
+ channel-index = <4>;
+ };
+ };
+
+Guest OS configuration:
+
+ hidma_24: dma-controller@0x5c050000 {
+ compatible = "qcom,hidma-1.0";
+ reg = <0 0x5c050000 0x0 0x1000>,
+ <0 0x5c0b0000 0x0 0x1000>;
+ interrupts = <0 389 0>;
+ desc-count = <10>;
+ channel-index = <4>;
+ };
--
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH V10 2/7] dma: hidma: Add Device Tree support
@ 2015-12-17 17:01 ` Sinan Kaya
0 siblings, 0 replies; 35+ messages in thread
From: Sinan Kaya @ 2015-12-17 17:01 UTC (permalink / raw)
To: linux-arm-kernel
Add documentation for the Qualcomm Technologies HIDMA driver.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
.../devicetree/bindings/dma/qcom_hidma_mgmt.txt | 79 ++++++++++++++++++++++
1 file changed, 79 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
diff --git a/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt b/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
new file mode 100644
index 0000000..0e6ed1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
@@ -0,0 +1,79 @@
+Qualcomm Technologies HIDMA Management interface
+
+Qualcomm Technologies HIDMA is a high speed DMA device. It only supports
+memcpy and memset capabilities. It has been designed for virtualized
+environments.
+
+Each HIDMA HW instance consists of multiple DMA channels. These channels
+share the same bandwidth. The bandwidth utilization can be parititioned
+among channels based on the priority and weight assignments.
+
+There are only two priority levels and 15 weigh assignments possible.
+
+Other parameters here determine how much of the system bus this HIDMA
+instance can use like maximum read/write request and and number of bytes to
+read/write in a single burst.
+
+Main node required properties:
+- compatible: "qcom,hidma-mgmt-1.0";
+- reg: Address range for DMA device
+- dma-channels: Number of channels supported by this DMA controller.
+- max-write-burst-bytes: Maximum write burst in bytes. A memcpy requested is
+ fragmented to multiples of this amount.
+- max-read-burst-bytes: Maximum read burst in bytes. A memcpy request is
+ fragmented to multiples of this amount.
+- max-write-transactions: Maximum write transactions to perform in a burst
+- max-read-transactions: Maximum read transactions to perform in a burst
+- channel-reset-timeout-cycles: Channel reset timeout in cycles for this SOC.
+
+Sub-nodes:
+
+HIDMA has one or more DMA channels that are used to move data from one
+memory location to another.
+
+Each DMA channel is described as a sub-node under the management object.
+When a transfer channel is given to the guest operating system, only the channel
+object is created. The drivers have support for both flat and hierarchical
+configuration.
+
+Required properties:
+- compatible: must contain "qcom,hidma-1.0"
+- reg: Addresses for the transfer and event channel
+- interrupts: Should contain the event interrupt
+- desc-count: Number of asynchronous requests this channel can handle
+- channel-index: The HW event channel completions will be delivered.
+
+Example:
+
+Hypervisor OS configuration:
+
+ hidma-mgmt at f9984000 = {
+ compatible = "qcom,hidma-mgmt-1.0";
+ reg = <0xf9984000 0x15000>;
+ dma-channels = <6>;
+ max-write-burst-bytes = <1024>;
+ max-read-burst-bytes = <1024>;
+ max-write-transactions = <31>;
+ max-read-transactions = <31>;
+ channel-reset-timeout-cycles = <0x500>;
+
+ hidma_24: dma-controller at 0x5c050000 {
+ compatible = "qcom,hidma-1.0";
+ reg = <0 0x5c050000 0x0 0x1000>,
+ <0 0x5c0b0000 0x0 0x1000>;
+ interrupts = <0 389 0>;
+ desc-count = <10>;
+ channel-index = <4>;
+ };
+ };
+
+Guest OS configuration:
+
+ hidma_24: dma-controller at 0x5c050000 {
+ compatible = "qcom,hidma-1.0";
+ reg = <0 0x5c050000 0x0 0x1000>,
+ <0 0x5c0b0000 0x0 0x1000>;
+ interrupts = <0 389 0>;
+ desc-count = <10>;
+ channel-index = <4>;
+ };
--
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 35+ messages in thread* Re: [PATCH V10 2/7] dma: hidma: Add Device Tree support
2015-12-17 17:01 ` Sinan Kaya
@ 2015-12-19 4:17 ` Rob Herring
-1 siblings, 0 replies; 35+ messages in thread
From: Rob Herring @ 2015-12-19 4:17 UTC (permalink / raw)
To: Sinan Kaya
Cc: dmaengine, mark.rutland, timur, devicetree, cov, vinod.koul, jcm,
agross, arnd, linux-arm-msm, linux-arm-kernel, linux-kernel
On Thu, Dec 17, 2015 at 12:01:17PM -0500, Sinan Kaya wrote:
> Add documentation for the Qualcomm Technologies HIDMA driver.
>
> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
> ---
> .../devicetree/bindings/dma/qcom_hidma_mgmt.txt | 79 ++++++++++++++++++++++
> 1 file changed, 79 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 35+ messages in thread
* [PATCH V10 2/7] dma: hidma: Add Device Tree support
@ 2015-12-19 4:17 ` Rob Herring
0 siblings, 0 replies; 35+ messages in thread
From: Rob Herring @ 2015-12-19 4:17 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Dec 17, 2015 at 12:01:17PM -0500, Sinan Kaya wrote:
> Add documentation for the Qualcomm Technologies HIDMA driver.
>
> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
> ---
> .../devicetree/bindings/dma/qcom_hidma_mgmt.txt | 79 ++++++++++++++++++++++
> 1 file changed, 79 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH V10 2/7] dma: hidma: Add Device Tree support
2015-12-19 4:17 ` Rob Herring
@ 2015-12-21 22:01 ` Okaya at codeaurora.org
-1 siblings, 0 replies; 35+ messages in thread
From: Okaya @ 2015-12-21 22:01 UTC (permalink / raw)
To: Rob Herring
Cc: Sinan Kaya, dmaengine, mark.rutland, timur, devicetree, cov,
vinod.koul, jcm, agross, arnd, linux-arm-msm, linux-arm-kernel,
linux-kernel
> On Thu, Dec 17, 2015 at 12:01:17PM -0500, Sinan Kaya wrote:
>> Add documentation for the Qualcomm Technologies HIDMA driver.
>>
>> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
>> ---
>> .../devicetree/bindings/dma/qcom_hidma_mgmt.txt | 79
>> ++++++++++++++++++++++
>> 1 file changed, 79 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
>
> Acked-by: Rob Herring <robh@kernel.org>
>
>
Ty.
^ permalink raw reply [flat|nested] 35+ messages in thread
* [PATCH V10 2/7] dma: hidma: Add Device Tree support
@ 2015-12-21 22:01 ` Okaya at codeaurora.org
0 siblings, 0 replies; 35+ messages in thread
From: Okaya at codeaurora.org @ 2015-12-21 22:01 UTC (permalink / raw)
To: linux-arm-kernel
> On Thu, Dec 17, 2015 at 12:01:17PM -0500, Sinan Kaya wrote:
>> Add documentation for the Qualcomm Technologies HIDMA driver.
>>
>> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
>> ---
>> .../devicetree/bindings/dma/qcom_hidma_mgmt.txt | 79
>> ++++++++++++++++++++++
>> 1 file changed, 79 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
>
> Acked-by: Rob Herring <robh@kernel.org>
>
>
Ty.
^ permalink raw reply [flat|nested] 35+ messages in thread
* [PATCH V10 3/7] dma: add Qualcomm Technologies HIDMA management driver
2015-12-17 17:01 ` Sinan Kaya
@ 2015-12-17 17:01 ` Sinan Kaya
-1 siblings, 0 replies; 35+ messages in thread
From: Sinan Kaya @ 2015-12-17 17:01 UTC (permalink / raw)
To: dmaengine, mark.rutland, timur, devicetree, cov, vinod.koul, jcm
Cc: agross, arnd, linux-arm-msm, linux-arm-kernel, Sinan Kaya, linux-kernel
The Qualcomm Technologies HIDMA device has been designed to support
virtualization technology. The driver has been divided into two to follow
the hardware design.
1. HIDMA Management driver
2. HIDMA Channel driver
Each HIDMA HW consists of multiple channels. These channels share some set
of common parameters. These parameters are initialized by the management
driver during power up. Same management driver is used for monitoring the
execution of the channels. Management driver can change the performance
behavior dynamically such as bandwidth allocation and prioritization.
The management driver is executed in hypervisor context and is the main
management entity for all channels provided by the device.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
.../ABI/testing/sysfs-platform-hidma-mgmt | 97 +++++++
drivers/dma/qcom/Kconfig | 11 +
drivers/dma/qcom/Makefile | 2 +
drivers/dma/qcom/hidma_mgmt.c | 302 +++++++++++++++++++++
drivers/dma/qcom/hidma_mgmt.h | 39 +++
drivers/dma/qcom/hidma_mgmt_sys.c | 295 ++++++++++++++++++++
6 files changed, 746 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-platform-hidma-mgmt
create mode 100644 drivers/dma/qcom/hidma_mgmt.c
create mode 100644 drivers/dma/qcom/hidma_mgmt.h
create mode 100644 drivers/dma/qcom/hidma_mgmt_sys.c
diff --git a/Documentation/ABI/testing/sysfs-platform-hidma-mgmt b/Documentation/ABI/testing/sysfs-platform-hidma-mgmt
new file mode 100644
index 0000000..c2fb5d0
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-hidma-mgmt
@@ -0,0 +1,97 @@
+What: /sys/devices/platform/hidma-mgmt*/chanops/chan*/priority
+ /sys/devices/platform/QCOM8060:*/chanops/chan*/priority
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Contains either 0 or 1 and indicates if the DMA channel is a
+ low priority (0) or high priority (1) channel.
+
+What: /sys/devices/platform/hidma-mgmt*/chanops/chan*/weight
+ /sys/devices/platform/QCOM8060:*/chanops/chan*/weight
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Contains 0..15 and indicates the weight of the channel among
+ equal priority channels during round robin scheduling.
+
+What: /sys/devices/platform/hidma-mgmt*/chreset_timeout_cycles
+ /sys/devices/platform/QCOM8060:*/chreset_timeout_cycles
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Contains the platform specific cycle value to wait after a
+ reset command is issued. If the value is chosen too short,
+ then the HW will issue a reset failure interrupt. The value
+ is platform specific and should not be changed without
+ consultance.
+
+What: /sys/devices/platform/hidma-mgmt*/dma_channels
+ /sys/devices/platform/QCOM8060:*/dma_channels
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Contains the number of dma channels supported by one instance
+ of HIDMA hardware. The value may change from chip to chip.
+
+What: /sys/devices/platform/hidma-mgmt*/hw_version_major
+ /sys/devices/platform/QCOM8060:*/hw_version_major
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Version number major for the hardware.
+
+What: /sys/devices/platform/hidma-mgmt*/hw_version_minor
+ /sys/devices/platform/QCOM8060:*/hw_version_minor
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Version number minor for the hardware.
+
+What: /sys/devices/platform/hidma-mgmt*/max_rd_xactions
+ /sys/devices/platform/QCOM8060:*/max_rd_xactions
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Contains a value between 0 and 31. Maximum number of
+ read transactions that can be issued back to back.
+ Choosing a higher number gives better performance but
+ can also cause performance reduction to other peripherals
+ sharing the same bus.
+
+What: /sys/devices/platform/hidma-mgmt*/max_read_request
+ /sys/devices/platform/QCOM8060:*/max_read_request
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Size of each read request. The value needs to be a power
+ of two and can be between 128 and 1024.
+
+What: /sys/devices/platform/hidma-mgmt*/max_wr_xactions
+ /sys/devices/platform/QCOM8060:*/max_wr_xactions
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Contains a value between 0 and 31. Maximum number of
+ write transactions that can be issued back to back.
+ Choosing a higher number gives better performance but
+ can also cause performance reduction to other peripherals
+ sharing the same bus.
+
+
+What: /sys/devices/platform/hidma-mgmt*/max_write_request
+ /sys/devices/platform/QCOM8060:*/max_write_request
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Size of each write request. The value needs to be a power
+ of two and can be between 128 and 1024.
diff --git a/drivers/dma/qcom/Kconfig b/drivers/dma/qcom/Kconfig
index f17c272..ebe5b8c 100644
--- a/drivers/dma/qcom/Kconfig
+++ b/drivers/dma/qcom/Kconfig
@@ -6,3 +6,14 @@ config QCOM_BAM_DMA
---help---
Enable support for the QCOM BAM DMA controller. This controller
provides DMA capabilities for a variety of on-chip devices.
+
+config QCOM_HIDMA_MGMT
+ tristate "Qualcomm Technologies HIDMA Management support"
+ select DMA_ENGINE
+ help
+ Enable support for the Qualcomm Technologies HIDMA Management.
+ Each DMA device requires one management interface driver
+ for basic initialization before QCOM_HIDMA channel driver can
+ start managing the channels. In a virtualized environment,
+ the guest OS would run QCOM_HIDMA channel driver and the
+ hypervisor would run the QCOM_HIDMA_MGMT management driver.
diff --git a/drivers/dma/qcom/Makefile b/drivers/dma/qcom/Makefile
index f612ae3..bfea699 100644
--- a/drivers/dma/qcom/Makefile
+++ b/drivers/dma/qcom/Makefile
@@ -1 +1,3 @@
obj-$(CONFIG_QCOM_BAM_DMA) += bam_dma.o
+obj-$(CONFIG_QCOM_HIDMA_MGMT) += hdma_mgmt.o
+hdma_mgmt-objs := hidma_mgmt.o hidma_mgmt_sys.o
diff --git a/drivers/dma/qcom/hidma_mgmt.c b/drivers/dma/qcom/hidma_mgmt.c
new file mode 100644
index 0000000..ef491b8
--- /dev/null
+++ b/drivers/dma/qcom/hidma_mgmt.c
@@ -0,0 +1,302 @@
+/*
+ * Qualcomm Technologies HIDMA DMA engine Management interface
+ *
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/dmaengine.h>
+#include <linux/acpi.h>
+#include <linux/of.h>
+#include <linux/property.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+#include <linux/bitops.h>
+
+#include "hidma_mgmt.h"
+
+#define HIDMA_QOS_N_OFFSET 0x300
+#define HIDMA_CFG_OFFSET 0x400
+#define HIDMA_MAX_BUS_REQ_LEN_OFFSET 0x41C
+#define HIDMA_MAX_XACTIONS_OFFSET 0x420
+#define HIDMA_HW_VERSION_OFFSET 0x424
+#define HIDMA_CHRESET_TIMEOUT_OFFSET 0x418
+
+#define HIDMA_MAX_WR_XACTIONS_MASK GENMASK(4, 0)
+#define HIDMA_MAX_RD_XACTIONS_MASK GENMASK(4, 0)
+#define HIDMA_WEIGHT_MASK GENMASK(6, 0)
+#define HIDMA_MAX_BUS_REQ_LEN_MASK GENMASK(15, 0)
+#define HIDMA_CHRESET_TIMEOUT_MASK GENMASK(19, 0)
+
+#define HIDMA_MAX_WR_XACTIONS_BIT_POS 16
+#define HIDMA_MAX_BUS_WR_REQ_BIT_POS 16
+#define HIDMA_WRR_BIT_POS 8
+#define HIDMA_PRIORITY_BIT_POS 15
+
+#define HIDMA_AUTOSUSPEND_TIMEOUT 2000
+#define HIDMA_MAX_CHANNEL_WEIGHT 15
+
+int hidma_mgmt_setup(struct hidma_mgmt_dev *mgmtdev)
+{
+ unsigned int i;
+ u32 val;
+
+ if (!is_power_of_2(mgmtdev->max_write_request) ||
+ (mgmtdev->max_write_request < 128) ||
+ (mgmtdev->max_write_request > 1024)) {
+ dev_err(&mgmtdev->pdev->dev, "invalid write request %d\n",
+ mgmtdev->max_write_request);
+ return -EINVAL;
+ }
+
+ if (!is_power_of_2(mgmtdev->max_read_request) ||
+ (mgmtdev->max_read_request < 128) ||
+ (mgmtdev->max_read_request > 1024)) {
+ dev_err(&mgmtdev->pdev->dev, "invalid read request %d\n",
+ mgmtdev->max_read_request);
+ return -EINVAL;
+ }
+
+ if (mgmtdev->max_wr_xactions > HIDMA_MAX_WR_XACTIONS_MASK) {
+ dev_err(&mgmtdev->pdev->dev,
+ "max_wr_xactions cannot be bigger than %ld\n",
+ HIDMA_MAX_WR_XACTIONS_MASK);
+ return -EINVAL;
+ }
+
+ if (mgmtdev->max_rd_xactions > HIDMA_MAX_RD_XACTIONS_MASK) {
+ dev_err(&mgmtdev->pdev->dev,
+ "max_rd_xactions cannot be bigger than %ld\n",
+ HIDMA_MAX_RD_XACTIONS_MASK);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < mgmtdev->dma_channels; i++) {
+ if (mgmtdev->priority[i] > 1) {
+ dev_err(&mgmtdev->pdev->dev,
+ "priority can be 0 or 1\n");
+ return -EINVAL;
+ }
+
+ if (mgmtdev->weight[i] > HIDMA_MAX_CHANNEL_WEIGHT) {
+ dev_err(&mgmtdev->pdev->dev,
+ "max value of weight can be %d.\n",
+ HIDMA_MAX_CHANNEL_WEIGHT);
+ return -EINVAL;
+ }
+
+ /* weight needs to be at least one */
+ if (mgmtdev->weight[i] == 0)
+ mgmtdev->weight[i] = 1;
+ }
+
+ pm_runtime_get_sync(&mgmtdev->pdev->dev);
+ val = readl(mgmtdev->virtaddr + HIDMA_MAX_BUS_REQ_LEN_OFFSET);
+ val &= ~(HIDMA_MAX_BUS_REQ_LEN_MASK << HIDMA_MAX_BUS_WR_REQ_BIT_POS);
+ val |= mgmtdev->max_write_request << HIDMA_MAX_BUS_WR_REQ_BIT_POS;
+ val &= ~HIDMA_MAX_BUS_REQ_LEN_MASK;
+ val |= mgmtdev->max_read_request;
+ writel(val, mgmtdev->virtaddr + HIDMA_MAX_BUS_REQ_LEN_OFFSET);
+
+ val = readl(mgmtdev->virtaddr + HIDMA_MAX_XACTIONS_OFFSET);
+ val &= ~(HIDMA_MAX_WR_XACTIONS_MASK << HIDMA_MAX_WR_XACTIONS_BIT_POS);
+ val |= mgmtdev->max_wr_xactions << HIDMA_MAX_WR_XACTIONS_BIT_POS;
+ val &= ~HIDMA_MAX_RD_XACTIONS_MASK;
+ val |= mgmtdev->max_rd_xactions;
+ writel(val, mgmtdev->virtaddr + HIDMA_MAX_XACTIONS_OFFSET);
+
+ mgmtdev->hw_version =
+ readl(mgmtdev->virtaddr + HIDMA_HW_VERSION_OFFSET);
+ mgmtdev->hw_version_major = (mgmtdev->hw_version >> 28) & 0xF;
+ mgmtdev->hw_version_minor = (mgmtdev->hw_version >> 16) & 0xF;
+
+ for (i = 0; i < mgmtdev->dma_channels; i++) {
+ u32 weight = mgmtdev->weight[i];
+ u32 priority = mgmtdev->priority[i];
+
+ val = readl(mgmtdev->virtaddr + HIDMA_QOS_N_OFFSET + (4 * i));
+ val &= ~(1 << HIDMA_PRIORITY_BIT_POS);
+ val |= (priority & 0x1) << HIDMA_PRIORITY_BIT_POS;
+ val &= ~(HIDMA_WEIGHT_MASK << HIDMA_WRR_BIT_POS);
+ val |= (weight & HIDMA_WEIGHT_MASK) << HIDMA_WRR_BIT_POS;
+ writel(val, mgmtdev->virtaddr + HIDMA_QOS_N_OFFSET + (4 * i));
+ }
+
+ val = readl(mgmtdev->virtaddr + HIDMA_CHRESET_TIMEOUT_OFFSET);
+ val &= ~HIDMA_CHRESET_TIMEOUT_MASK;
+ val |= mgmtdev->chreset_timeout_cycles & HIDMA_CHRESET_TIMEOUT_MASK;
+ writel(val, mgmtdev->virtaddr + HIDMA_CHRESET_TIMEOUT_OFFSET);
+
+ pm_runtime_mark_last_busy(&mgmtdev->pdev->dev);
+ pm_runtime_put_autosuspend(&mgmtdev->pdev->dev);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(hidma_mgmt_setup);
+
+static int hidma_mgmt_probe(struct platform_device *pdev)
+{
+ struct hidma_mgmt_dev *mgmtdev;
+ struct resource *res;
+ void __iomem *virtaddr;
+ int irq;
+ int rc;
+ u32 val;
+
+ pm_runtime_set_autosuspend_delay(&pdev->dev, HIDMA_AUTOSUSPEND_TIMEOUT);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_get_sync(&pdev->dev);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ virtaddr = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(virtaddr)) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "irq resources not found\n");
+ rc = irq;
+ goto out;
+ }
+
+ mgmtdev = devm_kzalloc(&pdev->dev, sizeof(*mgmtdev), GFP_KERNEL);
+ if (!mgmtdev) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ mgmtdev->pdev = pdev;
+ mgmtdev->addrsize = resource_size(res);
+ mgmtdev->virtaddr = virtaddr;
+
+ rc = device_property_read_u32(&pdev->dev, "dma-channels",
+ &mgmtdev->dma_channels);
+ if (rc) {
+ dev_err(&pdev->dev, "number of channels missing\n");
+ goto out;
+ }
+
+ rc = device_property_read_u32(&pdev->dev,
+ "channel-reset-timeout-cycles",
+ &mgmtdev->chreset_timeout_cycles);
+ if (rc) {
+ dev_err(&pdev->dev, "channel reset timeout missing\n");
+ goto out;
+ }
+
+ rc = device_property_read_u32(&pdev->dev, "max-write-burst-bytes",
+ &mgmtdev->max_write_request);
+ if (rc) {
+ dev_err(&pdev->dev, "max-write-burst-bytes missing\n");
+ goto out;
+ }
+
+ rc = device_property_read_u32(&pdev->dev, "max-read-burst-bytes",
+ &mgmtdev->max_read_request);
+ if (rc) {
+ dev_err(&pdev->dev, "max-read-burst-bytes missing\n");
+ goto out;
+ }
+
+ rc = device_property_read_u32(&pdev->dev, "max-write-transactions",
+ &mgmtdev->max_wr_xactions);
+ if (rc) {
+ dev_err(&pdev->dev, "max-write-transactions missing\n");
+ goto out;
+ }
+
+ rc = device_property_read_u32(&pdev->dev, "max-read-transactions",
+ &mgmtdev->max_rd_xactions);
+ if (rc) {
+ dev_err(&pdev->dev, "max-read-transactions missing\n");
+ goto out;
+ }
+
+ mgmtdev->priority = devm_kcalloc(&pdev->dev,
+ mgmtdev->dma_channels,
+ sizeof(*mgmtdev->priority),
+ GFP_KERNEL);
+ if (!mgmtdev->priority) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ mgmtdev->weight = devm_kcalloc(&pdev->dev,
+ mgmtdev->dma_channels,
+ sizeof(*mgmtdev->weight), GFP_KERNEL);
+ if (!mgmtdev->weight) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ rc = hidma_mgmt_setup(mgmtdev);
+ if (rc) {
+ dev_err(&pdev->dev, "setup failed\n");
+ goto out;
+ }
+
+ /* start the HW */
+ val = readl(mgmtdev->virtaddr + HIDMA_CFG_OFFSET);
+ val |= 1;
+ writel(val, mgmtdev->virtaddr + HIDMA_CFG_OFFSET);
+
+ rc = hidma_mgmt_init_sys(mgmtdev);
+ if (rc) {
+ dev_err(&pdev->dev, "sysfs setup failed\n");
+ goto out;
+ }
+
+ dev_info(&pdev->dev,
+ "HW rev: %d.%d @ %pa with %d physical channels\n",
+ mgmtdev->hw_version_major, mgmtdev->hw_version_minor,
+ &res->start, mgmtdev->dma_channels);
+
+ platform_set_drvdata(pdev, mgmtdev);
+ pm_runtime_mark_last_busy(&pdev->dev);
+ pm_runtime_put_autosuspend(&pdev->dev);
+ return 0;
+out:
+ pm_runtime_put_sync_suspend(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ return rc;
+}
+
+#if IS_ENABLED(CONFIG_ACPI)
+static const struct acpi_device_id hidma_mgmt_acpi_ids[] = {
+ {"QCOM8060"},
+ {},
+};
+#endif
+
+static const struct of_device_id hidma_mgmt_match[] = {
+ {.compatible = "qcom,hidma-mgmt-1.0",},
+ {},
+};
+MODULE_DEVICE_TABLE(of, hidma_mgmt_match);
+
+static struct platform_driver hidma_mgmt_driver = {
+ .probe = hidma_mgmt_probe,
+ .driver = {
+ .name = "hidma-mgmt",
+ .of_match_table = hidma_mgmt_match,
+ .acpi_match_table = ACPI_PTR(hidma_mgmt_acpi_ids),
+ },
+};
+
+module_platform_driver(hidma_mgmt_driver);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/dma/qcom/hidma_mgmt.h b/drivers/dma/qcom/hidma_mgmt.h
new file mode 100644
index 0000000..f7daf33
--- /dev/null
+++ b/drivers/dma/qcom/hidma_mgmt.h
@@ -0,0 +1,39 @@
+/*
+ * Qualcomm Technologies HIDMA Management common header
+ *
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+struct hidma_mgmt_dev {
+ u8 hw_version_major;
+ u8 hw_version_minor;
+
+ u32 max_wr_xactions;
+ u32 max_rd_xactions;
+ u32 max_write_request;
+ u32 max_read_request;
+ u32 dma_channels;
+ u32 chreset_timeout_cycles;
+ u32 hw_version;
+ u32 *priority;
+ u32 *weight;
+
+ /* Hardware device constants */
+ void __iomem *virtaddr;
+ resource_size_t addrsize;
+
+ struct kobject **chroots;
+ struct platform_device *pdev;
+};
+
+int hidma_mgmt_init_sys(struct hidma_mgmt_dev *dev);
+int hidma_mgmt_setup(struct hidma_mgmt_dev *mgmtdev);
diff --git a/drivers/dma/qcom/hidma_mgmt_sys.c b/drivers/dma/qcom/hidma_mgmt_sys.c
new file mode 100644
index 0000000..06ee41b
--- /dev/null
+++ b/drivers/dma/qcom/hidma_mgmt_sys.c
@@ -0,0 +1,295 @@
+/*
+ * Qualcomm Technologies HIDMA Management SYS interface
+ *
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/sysfs.h>
+#include <linux/platform_device.h>
+
+#include "hidma_mgmt.h"
+
+struct hidma_chan_attr {
+ struct hidma_mgmt_dev *mdev;
+ int index;
+ struct kobj_attribute attr;
+};
+
+struct hidma_mgmt_fileinfo {
+ char *name;
+ int mode;
+ int (*get)(struct hidma_mgmt_dev *mdev);
+ int (*set)(struct hidma_mgmt_dev *mdev, u64 val);
+};
+
+#define IMPLEMENT_GETSET(name) \
+static int get_##name(struct hidma_mgmt_dev *mdev) \
+{ \
+ return mdev->name; \
+} \
+static int set_##name(struct hidma_mgmt_dev *mdev, u64 val) \
+{ \
+ u64 tmp; \
+ int rc; \
+ \
+ tmp = mdev->name; \
+ mdev->name = val; \
+ rc = hidma_mgmt_setup(mdev); \
+ if (rc) \
+ mdev->name = tmp; \
+ return rc; \
+}
+
+#define DECLARE_ATTRIBUTE(name, mode) \
+ {#name, mode, get_##name, set_##name}
+
+IMPLEMENT_GETSET(hw_version_major)
+IMPLEMENT_GETSET(hw_version_minor)
+IMPLEMENT_GETSET(max_wr_xactions)
+IMPLEMENT_GETSET(max_rd_xactions)
+IMPLEMENT_GETSET(max_write_request)
+IMPLEMENT_GETSET(max_read_request)
+IMPLEMENT_GETSET(dma_channels)
+IMPLEMENT_GETSET(chreset_timeout_cycles)
+
+static int set_priority(struct hidma_mgmt_dev *mdev, unsigned int i, u64 val)
+{
+ u64 tmp;
+ int rc;
+
+ if (i > mdev->dma_channels)
+ return -EINVAL;
+
+ tmp = mdev->priority[i];
+ mdev->priority[i] = val;
+ rc = hidma_mgmt_setup(mdev);
+ if (rc)
+ mdev->priority[i] = tmp;
+ return rc;
+}
+
+static int set_weight(struct hidma_mgmt_dev *mdev, unsigned int i, u64 val)
+{
+ u64 tmp;
+ int rc;
+
+ if (i > mdev->dma_channels)
+ return -EINVAL;
+
+ tmp = mdev->weight[i];
+ mdev->weight[i] = val;
+ rc = hidma_mgmt_setup(mdev);
+ if (rc)
+ mdev->weight[i] = tmp;
+ return rc;
+}
+
+static struct hidma_mgmt_fileinfo hidma_mgmt_files[] = {
+ DECLARE_ATTRIBUTE(hw_version_major, S_IRUGO),
+ DECLARE_ATTRIBUTE(hw_version_minor, S_IRUGO),
+ DECLARE_ATTRIBUTE(dma_channels, S_IRUGO),
+ DECLARE_ATTRIBUTE(chreset_timeout_cycles, S_IRUGO),
+ DECLARE_ATTRIBUTE(max_wr_xactions, (S_IRUGO | S_IWUGO)),
+ DECLARE_ATTRIBUTE(max_rd_xactions, (S_IRUGO | S_IWUGO)),
+ DECLARE_ATTRIBUTE(max_write_request, (S_IRUGO | S_IWUGO)),
+ DECLARE_ATTRIBUTE(max_read_request, (S_IRUGO | S_IWUGO)),
+};
+
+static ssize_t show_values(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct hidma_mgmt_dev *mdev = platform_get_drvdata(pdev);
+ unsigned int i;
+
+ buf[0] = 0;
+
+ for (i = 0; i < ARRAY_SIZE(hidma_mgmt_files); i++) {
+ if (strcmp(attr->attr.name, hidma_mgmt_files[i].name) == 0) {
+ sprintf(buf, "%d\n", hidma_mgmt_files[i].get(mdev));
+ break;
+ }
+ }
+ return strlen(buf);
+}
+
+static ssize_t set_values(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct hidma_mgmt_dev *mdev = platform_get_drvdata(pdev);
+ unsigned long tmp;
+ unsigned int i;
+ int rc;
+
+ rc = kstrtoul(buf, 0, &tmp);
+ if (rc)
+ return rc;
+
+ for (i = 0; i < ARRAY_SIZE(hidma_mgmt_files); i++) {
+ if (strcmp(attr->attr.name, hidma_mgmt_files[i].name) == 0) {
+ rc = hidma_mgmt_files[i].set(mdev, tmp);
+ if (rc)
+ return rc;
+
+ break;
+ }
+ }
+ return count;
+}
+
+static ssize_t show_values_channel(struct kobject *kobj,
+ struct kobj_attribute *attr, char *buf)
+{
+ struct hidma_chan_attr *chattr;
+ struct hidma_mgmt_dev *mdev;
+
+ buf[0] = 0;
+ chattr = container_of(attr, struct hidma_chan_attr, attr);
+ mdev = chattr->mdev;
+ if (strcmp(attr->attr.name, "priority") == 0)
+ sprintf(buf, "%d\n", mdev->priority[chattr->index]);
+ else if (strcmp(attr->attr.name, "weight") == 0)
+ sprintf(buf, "%d\n", mdev->weight[chattr->index]);
+
+ return strlen(buf);
+}
+
+static ssize_t set_values_channel(struct kobject *kobj,
+ struct kobj_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct hidma_chan_attr *chattr;
+ struct hidma_mgmt_dev *mdev;
+ unsigned long tmp;
+ int rc;
+
+ chattr = container_of(attr, struct hidma_chan_attr, attr);
+ mdev = chattr->mdev;
+
+ rc = kstrtoul(buf, 0, &tmp);
+ if (rc)
+ return rc;
+
+ if (strcmp(attr->attr.name, "priority") == 0) {
+ rc = set_priority(mdev, chattr->index, tmp);
+ if (rc)
+ return rc;
+ } else if (strcmp(attr->attr.name, "weight") == 0) {
+ rc = set_weight(mdev, chattr->index, tmp);
+ if (rc)
+ return rc;
+ }
+ return count;
+}
+
+static int create_sysfs_entry(struct hidma_mgmt_dev *dev, char *name, int mode)
+{
+ struct device_attribute *attrs;
+ char *name_copy;
+
+ attrs = devm_kmalloc(&dev->pdev->dev,
+ sizeof(struct device_attribute), GFP_KERNEL);
+ if (!attrs)
+ return -ENOMEM;
+
+ name_copy = devm_kstrdup(&dev->pdev->dev, name, GFP_KERNEL);
+ if (!name_copy)
+ return -ENOMEM;
+
+ attrs->attr.name = name_copy;
+ attrs->attr.mode = mode;
+ attrs->show = show_values;
+ attrs->store = set_values;
+ sysfs_attr_init(&attrs->attr);
+
+ return device_create_file(&dev->pdev->dev, attrs);
+}
+
+static int create_sysfs_entry_channel(struct hidma_mgmt_dev *mdev, char *name,
+ int mode, int index,
+ struct kobject *parent)
+{
+ struct hidma_chan_attr *chattr;
+ char *name_copy;
+
+ chattr = devm_kmalloc(&mdev->pdev->dev, sizeof(*chattr), GFP_KERNEL);
+ if (!chattr)
+ return -ENOMEM;
+
+ name_copy = devm_kstrdup(&mdev->pdev->dev, name, GFP_KERNEL);
+ if (!name_copy)
+ return -ENOMEM;
+
+ chattr->mdev = mdev;
+ chattr->index = index;
+ chattr->attr.attr.name = name_copy;
+ chattr->attr.attr.mode = mode;
+ chattr->attr.show = show_values_channel;
+ chattr->attr.store = set_values_channel;
+ sysfs_attr_init(&chattr->attr.attr);
+
+ return sysfs_create_file(parent, &chattr->attr.attr);
+}
+
+int hidma_mgmt_init_sys(struct hidma_mgmt_dev *mdev)
+{
+ unsigned int i;
+ int rc;
+ int required;
+ struct kobject *chanops;
+
+ required = sizeof(*mdev->chroots) * mdev->dma_channels;
+ mdev->chroots = devm_kmalloc(&mdev->pdev->dev, required, GFP_KERNEL);
+ if (!mdev->chroots)
+ return -ENOMEM;
+
+ chanops = kobject_create_and_add("chanops", &mdev->pdev->dev.kobj);
+ if (!chanops)
+ return -ENOMEM;
+
+ /* create each channel directory here */
+ for (i = 0; i < mdev->dma_channels; i++) {
+ char name[10];
+
+ snprintf(name, sizeof(name), "chan%d", i);
+ mdev->chroots[i] = kobject_create_and_add(name, chanops);
+ if (!mdev->chroots[i])
+ return -ENOMEM;
+ }
+
+ /* populate common parameters */
+ for (i = 0; i < ARRAY_SIZE(hidma_mgmt_files); i++) {
+ rc = create_sysfs_entry(mdev, hidma_mgmt_files[i].name,
+ hidma_mgmt_files[i].mode);
+ if (rc)
+ return rc;
+ }
+
+ /* populate parameters that are per channel */
+ for (i = 0; i < mdev->dma_channels; i++) {
+ rc = create_sysfs_entry_channel(mdev, "priority",
+ (S_IRUGO | S_IWUGO), i,
+ mdev->chroots[i]);
+ if (rc)
+ return rc;
+
+ rc = create_sysfs_entry_channel(mdev, "weight",
+ (S_IRUGO | S_IWUGO), i,
+ mdev->chroots[i]);
+ if (rc)
+ return rc;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(hidma_mgmt_init_sys);
--
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH V10 3/7] dma: add Qualcomm Technologies HIDMA management driver
@ 2015-12-17 17:01 ` Sinan Kaya
0 siblings, 0 replies; 35+ messages in thread
From: Sinan Kaya @ 2015-12-17 17:01 UTC (permalink / raw)
To: linux-arm-kernel
The Qualcomm Technologies HIDMA device has been designed to support
virtualization technology. The driver has been divided into two to follow
the hardware design.
1. HIDMA Management driver
2. HIDMA Channel driver
Each HIDMA HW consists of multiple channels. These channels share some set
of common parameters. These parameters are initialized by the management
driver during power up. Same management driver is used for monitoring the
execution of the channels. Management driver can change the performance
behavior dynamically such as bandwidth allocation and prioritization.
The management driver is executed in hypervisor context and is the main
management entity for all channels provided by the device.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
.../ABI/testing/sysfs-platform-hidma-mgmt | 97 +++++++
drivers/dma/qcom/Kconfig | 11 +
drivers/dma/qcom/Makefile | 2 +
drivers/dma/qcom/hidma_mgmt.c | 302 +++++++++++++++++++++
drivers/dma/qcom/hidma_mgmt.h | 39 +++
drivers/dma/qcom/hidma_mgmt_sys.c | 295 ++++++++++++++++++++
6 files changed, 746 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-platform-hidma-mgmt
create mode 100644 drivers/dma/qcom/hidma_mgmt.c
create mode 100644 drivers/dma/qcom/hidma_mgmt.h
create mode 100644 drivers/dma/qcom/hidma_mgmt_sys.c
diff --git a/Documentation/ABI/testing/sysfs-platform-hidma-mgmt b/Documentation/ABI/testing/sysfs-platform-hidma-mgmt
new file mode 100644
index 0000000..c2fb5d0
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-hidma-mgmt
@@ -0,0 +1,97 @@
+What: /sys/devices/platform/hidma-mgmt*/chanops/chan*/priority
+ /sys/devices/platform/QCOM8060:*/chanops/chan*/priority
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Contains either 0 or 1 and indicates if the DMA channel is a
+ low priority (0) or high priority (1) channel.
+
+What: /sys/devices/platform/hidma-mgmt*/chanops/chan*/weight
+ /sys/devices/platform/QCOM8060:*/chanops/chan*/weight
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Contains 0..15 and indicates the weight of the channel among
+ equal priority channels during round robin scheduling.
+
+What: /sys/devices/platform/hidma-mgmt*/chreset_timeout_cycles
+ /sys/devices/platform/QCOM8060:*/chreset_timeout_cycles
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Contains the platform specific cycle value to wait after a
+ reset command is issued. If the value is chosen too short,
+ then the HW will issue a reset failure interrupt. The value
+ is platform specific and should not be changed without
+ consultance.
+
+What: /sys/devices/platform/hidma-mgmt*/dma_channels
+ /sys/devices/platform/QCOM8060:*/dma_channels
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Contains the number of dma channels supported by one instance
+ of HIDMA hardware. The value may change from chip to chip.
+
+What: /sys/devices/platform/hidma-mgmt*/hw_version_major
+ /sys/devices/platform/QCOM8060:*/hw_version_major
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Version number major for the hardware.
+
+What: /sys/devices/platform/hidma-mgmt*/hw_version_minor
+ /sys/devices/platform/QCOM8060:*/hw_version_minor
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Version number minor for the hardware.
+
+What: /sys/devices/platform/hidma-mgmt*/max_rd_xactions
+ /sys/devices/platform/QCOM8060:*/max_rd_xactions
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Contains a value between 0 and 31. Maximum number of
+ read transactions that can be issued back to back.
+ Choosing a higher number gives better performance but
+ can also cause performance reduction to other peripherals
+ sharing the same bus.
+
+What: /sys/devices/platform/hidma-mgmt*/max_read_request
+ /sys/devices/platform/QCOM8060:*/max_read_request
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Size of each read request. The value needs to be a power
+ of two and can be between 128 and 1024.
+
+What: /sys/devices/platform/hidma-mgmt*/max_wr_xactions
+ /sys/devices/platform/QCOM8060:*/max_wr_xactions
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Contains a value between 0 and 31. Maximum number of
+ write transactions that can be issued back to back.
+ Choosing a higher number gives better performance but
+ can also cause performance reduction to other peripherals
+ sharing the same bus.
+
+
+What: /sys/devices/platform/hidma-mgmt*/max_write_request
+ /sys/devices/platform/QCOM8060:*/max_write_request
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Size of each write request. The value needs to be a power
+ of two and can be between 128 and 1024.
diff --git a/drivers/dma/qcom/Kconfig b/drivers/dma/qcom/Kconfig
index f17c272..ebe5b8c 100644
--- a/drivers/dma/qcom/Kconfig
+++ b/drivers/dma/qcom/Kconfig
@@ -6,3 +6,14 @@ config QCOM_BAM_DMA
---help---
Enable support for the QCOM BAM DMA controller. This controller
provides DMA capabilities for a variety of on-chip devices.
+
+config QCOM_HIDMA_MGMT
+ tristate "Qualcomm Technologies HIDMA Management support"
+ select DMA_ENGINE
+ help
+ Enable support for the Qualcomm Technologies HIDMA Management.
+ Each DMA device requires one management interface driver
+ for basic initialization before QCOM_HIDMA channel driver can
+ start managing the channels. In a virtualized environment,
+ the guest OS would run QCOM_HIDMA channel driver and the
+ hypervisor would run the QCOM_HIDMA_MGMT management driver.
diff --git a/drivers/dma/qcom/Makefile b/drivers/dma/qcom/Makefile
index f612ae3..bfea699 100644
--- a/drivers/dma/qcom/Makefile
+++ b/drivers/dma/qcom/Makefile
@@ -1 +1,3 @@
obj-$(CONFIG_QCOM_BAM_DMA) += bam_dma.o
+obj-$(CONFIG_QCOM_HIDMA_MGMT) += hdma_mgmt.o
+hdma_mgmt-objs := hidma_mgmt.o hidma_mgmt_sys.o
diff --git a/drivers/dma/qcom/hidma_mgmt.c b/drivers/dma/qcom/hidma_mgmt.c
new file mode 100644
index 0000000..ef491b8
--- /dev/null
+++ b/drivers/dma/qcom/hidma_mgmt.c
@@ -0,0 +1,302 @@
+/*
+ * Qualcomm Technologies HIDMA DMA engine Management interface
+ *
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/dmaengine.h>
+#include <linux/acpi.h>
+#include <linux/of.h>
+#include <linux/property.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+#include <linux/bitops.h>
+
+#include "hidma_mgmt.h"
+
+#define HIDMA_QOS_N_OFFSET 0x300
+#define HIDMA_CFG_OFFSET 0x400
+#define HIDMA_MAX_BUS_REQ_LEN_OFFSET 0x41C
+#define HIDMA_MAX_XACTIONS_OFFSET 0x420
+#define HIDMA_HW_VERSION_OFFSET 0x424
+#define HIDMA_CHRESET_TIMEOUT_OFFSET 0x418
+
+#define HIDMA_MAX_WR_XACTIONS_MASK GENMASK(4, 0)
+#define HIDMA_MAX_RD_XACTIONS_MASK GENMASK(4, 0)
+#define HIDMA_WEIGHT_MASK GENMASK(6, 0)
+#define HIDMA_MAX_BUS_REQ_LEN_MASK GENMASK(15, 0)
+#define HIDMA_CHRESET_TIMEOUT_MASK GENMASK(19, 0)
+
+#define HIDMA_MAX_WR_XACTIONS_BIT_POS 16
+#define HIDMA_MAX_BUS_WR_REQ_BIT_POS 16
+#define HIDMA_WRR_BIT_POS 8
+#define HIDMA_PRIORITY_BIT_POS 15
+
+#define HIDMA_AUTOSUSPEND_TIMEOUT 2000
+#define HIDMA_MAX_CHANNEL_WEIGHT 15
+
+int hidma_mgmt_setup(struct hidma_mgmt_dev *mgmtdev)
+{
+ unsigned int i;
+ u32 val;
+
+ if (!is_power_of_2(mgmtdev->max_write_request) ||
+ (mgmtdev->max_write_request < 128) ||
+ (mgmtdev->max_write_request > 1024)) {
+ dev_err(&mgmtdev->pdev->dev, "invalid write request %d\n",
+ mgmtdev->max_write_request);
+ return -EINVAL;
+ }
+
+ if (!is_power_of_2(mgmtdev->max_read_request) ||
+ (mgmtdev->max_read_request < 128) ||
+ (mgmtdev->max_read_request > 1024)) {
+ dev_err(&mgmtdev->pdev->dev, "invalid read request %d\n",
+ mgmtdev->max_read_request);
+ return -EINVAL;
+ }
+
+ if (mgmtdev->max_wr_xactions > HIDMA_MAX_WR_XACTIONS_MASK) {
+ dev_err(&mgmtdev->pdev->dev,
+ "max_wr_xactions cannot be bigger than %ld\n",
+ HIDMA_MAX_WR_XACTIONS_MASK);
+ return -EINVAL;
+ }
+
+ if (mgmtdev->max_rd_xactions > HIDMA_MAX_RD_XACTIONS_MASK) {
+ dev_err(&mgmtdev->pdev->dev,
+ "max_rd_xactions cannot be bigger than %ld\n",
+ HIDMA_MAX_RD_XACTIONS_MASK);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < mgmtdev->dma_channels; i++) {
+ if (mgmtdev->priority[i] > 1) {
+ dev_err(&mgmtdev->pdev->dev,
+ "priority can be 0 or 1\n");
+ return -EINVAL;
+ }
+
+ if (mgmtdev->weight[i] > HIDMA_MAX_CHANNEL_WEIGHT) {
+ dev_err(&mgmtdev->pdev->dev,
+ "max value of weight can be %d.\n",
+ HIDMA_MAX_CHANNEL_WEIGHT);
+ return -EINVAL;
+ }
+
+ /* weight needs to be at least one */
+ if (mgmtdev->weight[i] == 0)
+ mgmtdev->weight[i] = 1;
+ }
+
+ pm_runtime_get_sync(&mgmtdev->pdev->dev);
+ val = readl(mgmtdev->virtaddr + HIDMA_MAX_BUS_REQ_LEN_OFFSET);
+ val &= ~(HIDMA_MAX_BUS_REQ_LEN_MASK << HIDMA_MAX_BUS_WR_REQ_BIT_POS);
+ val |= mgmtdev->max_write_request << HIDMA_MAX_BUS_WR_REQ_BIT_POS;
+ val &= ~HIDMA_MAX_BUS_REQ_LEN_MASK;
+ val |= mgmtdev->max_read_request;
+ writel(val, mgmtdev->virtaddr + HIDMA_MAX_BUS_REQ_LEN_OFFSET);
+
+ val = readl(mgmtdev->virtaddr + HIDMA_MAX_XACTIONS_OFFSET);
+ val &= ~(HIDMA_MAX_WR_XACTIONS_MASK << HIDMA_MAX_WR_XACTIONS_BIT_POS);
+ val |= mgmtdev->max_wr_xactions << HIDMA_MAX_WR_XACTIONS_BIT_POS;
+ val &= ~HIDMA_MAX_RD_XACTIONS_MASK;
+ val |= mgmtdev->max_rd_xactions;
+ writel(val, mgmtdev->virtaddr + HIDMA_MAX_XACTIONS_OFFSET);
+
+ mgmtdev->hw_version =
+ readl(mgmtdev->virtaddr + HIDMA_HW_VERSION_OFFSET);
+ mgmtdev->hw_version_major = (mgmtdev->hw_version >> 28) & 0xF;
+ mgmtdev->hw_version_minor = (mgmtdev->hw_version >> 16) & 0xF;
+
+ for (i = 0; i < mgmtdev->dma_channels; i++) {
+ u32 weight = mgmtdev->weight[i];
+ u32 priority = mgmtdev->priority[i];
+
+ val = readl(mgmtdev->virtaddr + HIDMA_QOS_N_OFFSET + (4 * i));
+ val &= ~(1 << HIDMA_PRIORITY_BIT_POS);
+ val |= (priority & 0x1) << HIDMA_PRIORITY_BIT_POS;
+ val &= ~(HIDMA_WEIGHT_MASK << HIDMA_WRR_BIT_POS);
+ val |= (weight & HIDMA_WEIGHT_MASK) << HIDMA_WRR_BIT_POS;
+ writel(val, mgmtdev->virtaddr + HIDMA_QOS_N_OFFSET + (4 * i));
+ }
+
+ val = readl(mgmtdev->virtaddr + HIDMA_CHRESET_TIMEOUT_OFFSET);
+ val &= ~HIDMA_CHRESET_TIMEOUT_MASK;
+ val |= mgmtdev->chreset_timeout_cycles & HIDMA_CHRESET_TIMEOUT_MASK;
+ writel(val, mgmtdev->virtaddr + HIDMA_CHRESET_TIMEOUT_OFFSET);
+
+ pm_runtime_mark_last_busy(&mgmtdev->pdev->dev);
+ pm_runtime_put_autosuspend(&mgmtdev->pdev->dev);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(hidma_mgmt_setup);
+
+static int hidma_mgmt_probe(struct platform_device *pdev)
+{
+ struct hidma_mgmt_dev *mgmtdev;
+ struct resource *res;
+ void __iomem *virtaddr;
+ int irq;
+ int rc;
+ u32 val;
+
+ pm_runtime_set_autosuspend_delay(&pdev->dev, HIDMA_AUTOSUSPEND_TIMEOUT);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_get_sync(&pdev->dev);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ virtaddr = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(virtaddr)) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "irq resources not found\n");
+ rc = irq;
+ goto out;
+ }
+
+ mgmtdev = devm_kzalloc(&pdev->dev, sizeof(*mgmtdev), GFP_KERNEL);
+ if (!mgmtdev) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ mgmtdev->pdev = pdev;
+ mgmtdev->addrsize = resource_size(res);
+ mgmtdev->virtaddr = virtaddr;
+
+ rc = device_property_read_u32(&pdev->dev, "dma-channels",
+ &mgmtdev->dma_channels);
+ if (rc) {
+ dev_err(&pdev->dev, "number of channels missing\n");
+ goto out;
+ }
+
+ rc = device_property_read_u32(&pdev->dev,
+ "channel-reset-timeout-cycles",
+ &mgmtdev->chreset_timeout_cycles);
+ if (rc) {
+ dev_err(&pdev->dev, "channel reset timeout missing\n");
+ goto out;
+ }
+
+ rc = device_property_read_u32(&pdev->dev, "max-write-burst-bytes",
+ &mgmtdev->max_write_request);
+ if (rc) {
+ dev_err(&pdev->dev, "max-write-burst-bytes missing\n");
+ goto out;
+ }
+
+ rc = device_property_read_u32(&pdev->dev, "max-read-burst-bytes",
+ &mgmtdev->max_read_request);
+ if (rc) {
+ dev_err(&pdev->dev, "max-read-burst-bytes missing\n");
+ goto out;
+ }
+
+ rc = device_property_read_u32(&pdev->dev, "max-write-transactions",
+ &mgmtdev->max_wr_xactions);
+ if (rc) {
+ dev_err(&pdev->dev, "max-write-transactions missing\n");
+ goto out;
+ }
+
+ rc = device_property_read_u32(&pdev->dev, "max-read-transactions",
+ &mgmtdev->max_rd_xactions);
+ if (rc) {
+ dev_err(&pdev->dev, "max-read-transactions missing\n");
+ goto out;
+ }
+
+ mgmtdev->priority = devm_kcalloc(&pdev->dev,
+ mgmtdev->dma_channels,
+ sizeof(*mgmtdev->priority),
+ GFP_KERNEL);
+ if (!mgmtdev->priority) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ mgmtdev->weight = devm_kcalloc(&pdev->dev,
+ mgmtdev->dma_channels,
+ sizeof(*mgmtdev->weight), GFP_KERNEL);
+ if (!mgmtdev->weight) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ rc = hidma_mgmt_setup(mgmtdev);
+ if (rc) {
+ dev_err(&pdev->dev, "setup failed\n");
+ goto out;
+ }
+
+ /* start the HW */
+ val = readl(mgmtdev->virtaddr + HIDMA_CFG_OFFSET);
+ val |= 1;
+ writel(val, mgmtdev->virtaddr + HIDMA_CFG_OFFSET);
+
+ rc = hidma_mgmt_init_sys(mgmtdev);
+ if (rc) {
+ dev_err(&pdev->dev, "sysfs setup failed\n");
+ goto out;
+ }
+
+ dev_info(&pdev->dev,
+ "HW rev: %d.%d @ %pa with %d physical channels\n",
+ mgmtdev->hw_version_major, mgmtdev->hw_version_minor,
+ &res->start, mgmtdev->dma_channels);
+
+ platform_set_drvdata(pdev, mgmtdev);
+ pm_runtime_mark_last_busy(&pdev->dev);
+ pm_runtime_put_autosuspend(&pdev->dev);
+ return 0;
+out:
+ pm_runtime_put_sync_suspend(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ return rc;
+}
+
+#if IS_ENABLED(CONFIG_ACPI)
+static const struct acpi_device_id hidma_mgmt_acpi_ids[] = {
+ {"QCOM8060"},
+ {},
+};
+#endif
+
+static const struct of_device_id hidma_mgmt_match[] = {
+ {.compatible = "qcom,hidma-mgmt-1.0",},
+ {},
+};
+MODULE_DEVICE_TABLE(of, hidma_mgmt_match);
+
+static struct platform_driver hidma_mgmt_driver = {
+ .probe = hidma_mgmt_probe,
+ .driver = {
+ .name = "hidma-mgmt",
+ .of_match_table = hidma_mgmt_match,
+ .acpi_match_table = ACPI_PTR(hidma_mgmt_acpi_ids),
+ },
+};
+
+module_platform_driver(hidma_mgmt_driver);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/dma/qcom/hidma_mgmt.h b/drivers/dma/qcom/hidma_mgmt.h
new file mode 100644
index 0000000..f7daf33
--- /dev/null
+++ b/drivers/dma/qcom/hidma_mgmt.h
@@ -0,0 +1,39 @@
+/*
+ * Qualcomm Technologies HIDMA Management common header
+ *
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+struct hidma_mgmt_dev {
+ u8 hw_version_major;
+ u8 hw_version_minor;
+
+ u32 max_wr_xactions;
+ u32 max_rd_xactions;
+ u32 max_write_request;
+ u32 max_read_request;
+ u32 dma_channels;
+ u32 chreset_timeout_cycles;
+ u32 hw_version;
+ u32 *priority;
+ u32 *weight;
+
+ /* Hardware device constants */
+ void __iomem *virtaddr;
+ resource_size_t addrsize;
+
+ struct kobject **chroots;
+ struct platform_device *pdev;
+};
+
+int hidma_mgmt_init_sys(struct hidma_mgmt_dev *dev);
+int hidma_mgmt_setup(struct hidma_mgmt_dev *mgmtdev);
diff --git a/drivers/dma/qcom/hidma_mgmt_sys.c b/drivers/dma/qcom/hidma_mgmt_sys.c
new file mode 100644
index 0000000..06ee41b
--- /dev/null
+++ b/drivers/dma/qcom/hidma_mgmt_sys.c
@@ -0,0 +1,295 @@
+/*
+ * Qualcomm Technologies HIDMA Management SYS interface
+ *
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/sysfs.h>
+#include <linux/platform_device.h>
+
+#include "hidma_mgmt.h"
+
+struct hidma_chan_attr {
+ struct hidma_mgmt_dev *mdev;
+ int index;
+ struct kobj_attribute attr;
+};
+
+struct hidma_mgmt_fileinfo {
+ char *name;
+ int mode;
+ int (*get)(struct hidma_mgmt_dev *mdev);
+ int (*set)(struct hidma_mgmt_dev *mdev, u64 val);
+};
+
+#define IMPLEMENT_GETSET(name) \
+static int get_##name(struct hidma_mgmt_dev *mdev) \
+{ \
+ return mdev->name; \
+} \
+static int set_##name(struct hidma_mgmt_dev *mdev, u64 val) \
+{ \
+ u64 tmp; \
+ int rc; \
+ \
+ tmp = mdev->name; \
+ mdev->name = val; \
+ rc = hidma_mgmt_setup(mdev); \
+ if (rc) \
+ mdev->name = tmp; \
+ return rc; \
+}
+
+#define DECLARE_ATTRIBUTE(name, mode) \
+ {#name, mode, get_##name, set_##name}
+
+IMPLEMENT_GETSET(hw_version_major)
+IMPLEMENT_GETSET(hw_version_minor)
+IMPLEMENT_GETSET(max_wr_xactions)
+IMPLEMENT_GETSET(max_rd_xactions)
+IMPLEMENT_GETSET(max_write_request)
+IMPLEMENT_GETSET(max_read_request)
+IMPLEMENT_GETSET(dma_channels)
+IMPLEMENT_GETSET(chreset_timeout_cycles)
+
+static int set_priority(struct hidma_mgmt_dev *mdev, unsigned int i, u64 val)
+{
+ u64 tmp;
+ int rc;
+
+ if (i > mdev->dma_channels)
+ return -EINVAL;
+
+ tmp = mdev->priority[i];
+ mdev->priority[i] = val;
+ rc = hidma_mgmt_setup(mdev);
+ if (rc)
+ mdev->priority[i] = tmp;
+ return rc;
+}
+
+static int set_weight(struct hidma_mgmt_dev *mdev, unsigned int i, u64 val)
+{
+ u64 tmp;
+ int rc;
+
+ if (i > mdev->dma_channels)
+ return -EINVAL;
+
+ tmp = mdev->weight[i];
+ mdev->weight[i] = val;
+ rc = hidma_mgmt_setup(mdev);
+ if (rc)
+ mdev->weight[i] = tmp;
+ return rc;
+}
+
+static struct hidma_mgmt_fileinfo hidma_mgmt_files[] = {
+ DECLARE_ATTRIBUTE(hw_version_major, S_IRUGO),
+ DECLARE_ATTRIBUTE(hw_version_minor, S_IRUGO),
+ DECLARE_ATTRIBUTE(dma_channels, S_IRUGO),
+ DECLARE_ATTRIBUTE(chreset_timeout_cycles, S_IRUGO),
+ DECLARE_ATTRIBUTE(max_wr_xactions, (S_IRUGO | S_IWUGO)),
+ DECLARE_ATTRIBUTE(max_rd_xactions, (S_IRUGO | S_IWUGO)),
+ DECLARE_ATTRIBUTE(max_write_request, (S_IRUGO | S_IWUGO)),
+ DECLARE_ATTRIBUTE(max_read_request, (S_IRUGO | S_IWUGO)),
+};
+
+static ssize_t show_values(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct hidma_mgmt_dev *mdev = platform_get_drvdata(pdev);
+ unsigned int i;
+
+ buf[0] = 0;
+
+ for (i = 0; i < ARRAY_SIZE(hidma_mgmt_files); i++) {
+ if (strcmp(attr->attr.name, hidma_mgmt_files[i].name) == 0) {
+ sprintf(buf, "%d\n", hidma_mgmt_files[i].get(mdev));
+ break;
+ }
+ }
+ return strlen(buf);
+}
+
+static ssize_t set_values(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct hidma_mgmt_dev *mdev = platform_get_drvdata(pdev);
+ unsigned long tmp;
+ unsigned int i;
+ int rc;
+
+ rc = kstrtoul(buf, 0, &tmp);
+ if (rc)
+ return rc;
+
+ for (i = 0; i < ARRAY_SIZE(hidma_mgmt_files); i++) {
+ if (strcmp(attr->attr.name, hidma_mgmt_files[i].name) == 0) {
+ rc = hidma_mgmt_files[i].set(mdev, tmp);
+ if (rc)
+ return rc;
+
+ break;
+ }
+ }
+ return count;
+}
+
+static ssize_t show_values_channel(struct kobject *kobj,
+ struct kobj_attribute *attr, char *buf)
+{
+ struct hidma_chan_attr *chattr;
+ struct hidma_mgmt_dev *mdev;
+
+ buf[0] = 0;
+ chattr = container_of(attr, struct hidma_chan_attr, attr);
+ mdev = chattr->mdev;
+ if (strcmp(attr->attr.name, "priority") == 0)
+ sprintf(buf, "%d\n", mdev->priority[chattr->index]);
+ else if (strcmp(attr->attr.name, "weight") == 0)
+ sprintf(buf, "%d\n", mdev->weight[chattr->index]);
+
+ return strlen(buf);
+}
+
+static ssize_t set_values_channel(struct kobject *kobj,
+ struct kobj_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct hidma_chan_attr *chattr;
+ struct hidma_mgmt_dev *mdev;
+ unsigned long tmp;
+ int rc;
+
+ chattr = container_of(attr, struct hidma_chan_attr, attr);
+ mdev = chattr->mdev;
+
+ rc = kstrtoul(buf, 0, &tmp);
+ if (rc)
+ return rc;
+
+ if (strcmp(attr->attr.name, "priority") == 0) {
+ rc = set_priority(mdev, chattr->index, tmp);
+ if (rc)
+ return rc;
+ } else if (strcmp(attr->attr.name, "weight") == 0) {
+ rc = set_weight(mdev, chattr->index, tmp);
+ if (rc)
+ return rc;
+ }
+ return count;
+}
+
+static int create_sysfs_entry(struct hidma_mgmt_dev *dev, char *name, int mode)
+{
+ struct device_attribute *attrs;
+ char *name_copy;
+
+ attrs = devm_kmalloc(&dev->pdev->dev,
+ sizeof(struct device_attribute), GFP_KERNEL);
+ if (!attrs)
+ return -ENOMEM;
+
+ name_copy = devm_kstrdup(&dev->pdev->dev, name, GFP_KERNEL);
+ if (!name_copy)
+ return -ENOMEM;
+
+ attrs->attr.name = name_copy;
+ attrs->attr.mode = mode;
+ attrs->show = show_values;
+ attrs->store = set_values;
+ sysfs_attr_init(&attrs->attr);
+
+ return device_create_file(&dev->pdev->dev, attrs);
+}
+
+static int create_sysfs_entry_channel(struct hidma_mgmt_dev *mdev, char *name,
+ int mode, int index,
+ struct kobject *parent)
+{
+ struct hidma_chan_attr *chattr;
+ char *name_copy;
+
+ chattr = devm_kmalloc(&mdev->pdev->dev, sizeof(*chattr), GFP_KERNEL);
+ if (!chattr)
+ return -ENOMEM;
+
+ name_copy = devm_kstrdup(&mdev->pdev->dev, name, GFP_KERNEL);
+ if (!name_copy)
+ return -ENOMEM;
+
+ chattr->mdev = mdev;
+ chattr->index = index;
+ chattr->attr.attr.name = name_copy;
+ chattr->attr.attr.mode = mode;
+ chattr->attr.show = show_values_channel;
+ chattr->attr.store = set_values_channel;
+ sysfs_attr_init(&chattr->attr.attr);
+
+ return sysfs_create_file(parent, &chattr->attr.attr);
+}
+
+int hidma_mgmt_init_sys(struct hidma_mgmt_dev *mdev)
+{
+ unsigned int i;
+ int rc;
+ int required;
+ struct kobject *chanops;
+
+ required = sizeof(*mdev->chroots) * mdev->dma_channels;
+ mdev->chroots = devm_kmalloc(&mdev->pdev->dev, required, GFP_KERNEL);
+ if (!mdev->chroots)
+ return -ENOMEM;
+
+ chanops = kobject_create_and_add("chanops", &mdev->pdev->dev.kobj);
+ if (!chanops)
+ return -ENOMEM;
+
+ /* create each channel directory here */
+ for (i = 0; i < mdev->dma_channels; i++) {
+ char name[10];
+
+ snprintf(name, sizeof(name), "chan%d", i);
+ mdev->chroots[i] = kobject_create_and_add(name, chanops);
+ if (!mdev->chroots[i])
+ return -ENOMEM;
+ }
+
+ /* populate common parameters */
+ for (i = 0; i < ARRAY_SIZE(hidma_mgmt_files); i++) {
+ rc = create_sysfs_entry(mdev, hidma_mgmt_files[i].name,
+ hidma_mgmt_files[i].mode);
+ if (rc)
+ return rc;
+ }
+
+ /* populate parameters that are per channel */
+ for (i = 0; i < mdev->dma_channels; i++) {
+ rc = create_sysfs_entry_channel(mdev, "priority",
+ (S_IRUGO | S_IWUGO), i,
+ mdev->chroots[i]);
+ if (rc)
+ return rc;
+
+ rc = create_sysfs_entry_channel(mdev, "weight",
+ (S_IRUGO | S_IWUGO), i,
+ mdev->chroots[i]);
+ if (rc)
+ return rc;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(hidma_mgmt_init_sys);
--
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [PATCH V10 4/7] dma: add Qualcomm Technologies HIDMA channel driver
2015-12-17 17:01 ` Sinan Kaya
@ 2015-12-17 17:01 ` Sinan Kaya
-1 siblings, 0 replies; 35+ messages in thread
From: Sinan Kaya @ 2015-12-17 17:01 UTC (permalink / raw)
To: dmaengine, mark.rutland, timur, devicetree, cov, vinod.koul, jcm
Cc: agross, arnd, linux-arm-msm, linux-arm-kernel, Sinan Kaya, linux-kernel
This patch adds support for hidma engine. The driver consists of two
logical blocks. The DMA engine interface and the low-level interface.
The hardware only supports memcpy/memset and this driver only support
memcpy interface. HW and driver doesn't support slave interface.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
drivers/dma/qcom/Kconfig | 10 +
drivers/dma/qcom/hidma.c | 744 +++++++++++++++++++++++++++++++++++++++++++++++
drivers/dma/qcom/hidma.h | 160 ++++++++++
3 files changed, 914 insertions(+)
create mode 100644 drivers/dma/qcom/hidma.c
create mode 100644 drivers/dma/qcom/hidma.h
diff --git a/drivers/dma/qcom/Kconfig b/drivers/dma/qcom/Kconfig
index ebe5b8c..5588e1c 100644
--- a/drivers/dma/qcom/Kconfig
+++ b/drivers/dma/qcom/Kconfig
@@ -17,3 +17,13 @@ config QCOM_HIDMA_MGMT
start managing the channels. In a virtualized environment,
the guest OS would run QCOM_HIDMA channel driver and the
hypervisor would run the QCOM_HIDMA_MGMT management driver.
+
+config QCOM_HIDMA
+ tristate "Qualcomm Technologies HIDMA Channel support"
+ select DMA_ENGINE
+ help
+ Enable support for the Qualcomm Technologies HIDMA controller.
+ The HIDMA controller supports optimized buffer copies
+ (user to kernel, kernel to kernel, etc.). It only supports
+ memcpy interface. The core is not intended for general
+ purpose slave DMA.
diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
new file mode 100644
index 0000000..f8960f1
--- /dev/null
+++ b/drivers/dma/qcom/hidma.c
@@ -0,0 +1,744 @@
+/*
+ * Qualcomm Technologies HIDMA DMA engine interface
+ *
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Copyright (C) Freescale Semicondutor, Inc. 2007, 2008.
+ * Copyright (C) Semihalf 2009
+ * Copyright (C) Ilya Yanok, Emcraft Systems 2010
+ * Copyright (C) Alexander Popov, Promcontroller 2014
+ *
+ * Written by Piotr Ziecik <kosmo@semihalf.com>. Hardware description
+ * (defines, structures and comments) was taken from MPC5121 DMA driver
+ * written by Hongjun Chen <hong-jun.chen@freescale.com>.
+ *
+ * Approved as OSADL project by a majority of OSADL members and funded
+ * by OSADL membership fees in 2009; for details see www.osadl.org.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called COPYING.
+ */
+
+/* Linux Foundation elects GPLv2 license only. */
+
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/of_dma.h>
+#include <linux/property.h>
+#include <linux/delay.h>
+#include <linux/acpi.h>
+#include <linux/irq.h>
+#include <linux/atomic.h>
+#include <linux/pm_runtime.h>
+
+#include "../dmaengine.h"
+#include "hidma.h"
+
+/*
+ * Default idle time is 2 seconds. This parameter can
+ * be overridden by changing the following
+ * /sys/bus/platform/devices/QCOM8061:<xy>/power/autosuspend_delay_ms
+ * during kernel boot.
+ */
+#define HIDMA_AUTOSUSPEND_TIMEOUT 2000
+#define HIDMA_ERR_INFO_SW 0xFF
+#define HIDMA_ERR_CODE_UNEXPECTED_TERMINATE 0x0
+
+static inline struct hidma_dev *to_hidma_dev(struct dma_device *dmadev)
+{
+ return container_of(dmadev, struct hidma_dev, ddev);
+}
+
+static inline
+struct hidma_dev *to_hidma_dev_from_lldev(struct hidma_lldev **_lldevp)
+{
+ return container_of(_lldevp, struct hidma_dev, lldev);
+}
+
+static inline struct hidma_chan *to_hidma_chan(struct dma_chan *dmach)
+{
+ return container_of(dmach, struct hidma_chan, chan);
+}
+
+static inline
+struct hidma_desc *to_hidma_desc(struct dma_async_tx_descriptor *t)
+{
+ return container_of(t, struct hidma_desc, desc);
+}
+
+static void hidma_free(struct hidma_dev *dmadev)
+{
+ INIT_LIST_HEAD(&dmadev->ddev.channels);
+}
+
+static unsigned int nr_desc_prm;
+module_param(nr_desc_prm, uint, 0644);
+MODULE_PARM_DESC(nr_desc_prm, "number of descriptors (default: 0)");
+
+#define HIDMA_MAX_CHANNELS 64
+static int channel_idx[HIDMA_MAX_CHANNELS] = {
+ [0 ... (HIDMA_MAX_CHANNELS - 1)] = -1
+};
+
+/*
+ * Each DMA channel is associated with an event channel for interrupt
+ * delivery. The event channel index usually comes from the firmware through
+ * ACPI/DT. When a HIDMA channel is executed in the guest machine context (QEMU)
+ * the device tree gets auto-generated based on the memory and IRQ resources
+ * this driver uses on the host machine. Any device specific paraemeter such as
+ * channel-index gets ignored by the QEMU.
+ * We are using this command line parameter to pass the event channel index to
+ * the guest machine.
+ */
+static unsigned int num_channel_idx;
+module_param_array_named(channel_idx, channel_idx, int, &num_channel_idx,
+ 0644);
+MODULE_PARM_DESC(channel_idx, "channel index array for the notifications");
+static atomic_t channel_ref_count;
+
+/* process completed descriptors */
+static void hidma_process_completed(struct hidma_chan *mchan)
+{
+ struct dma_device *ddev = mchan->chan.device;
+ struct hidma_dev *mdma = to_hidma_dev(ddev);
+ struct dma_async_tx_descriptor *desc;
+ dma_cookie_t last_cookie;
+ struct hidma_desc *mdesc;
+ unsigned long irqflags;
+ struct list_head list;
+
+ INIT_LIST_HEAD(&list);
+
+ /* Get all completed descriptors */
+ spin_lock_irqsave(&mchan->lock, irqflags);
+ list_splice_tail_init(&mchan->completed, &list);
+ spin_unlock_irqrestore(&mchan->lock, irqflags);
+
+ /* Execute callbacks and run dependencies */
+ list_for_each_entry(mdesc, &list, node) {
+ enum dma_status llstat;
+
+ desc = &mdesc->desc;
+
+ spin_lock_irqsave(&mchan->lock, irqflags);
+ dma_cookie_complete(desc);
+ spin_unlock_irqrestore(&mchan->lock, irqflags);
+
+ llstat = hidma_ll_status(mdma->lldev, mdesc->tre_ch);
+ if (desc->callback && (llstat == DMA_COMPLETE))
+ desc->callback(desc->callback_param);
+
+ last_cookie = desc->cookie;
+ dma_run_dependencies(desc);
+ }
+
+ /* Free descriptors */
+ spin_lock_irqsave(&mchan->lock, irqflags);
+ list_splice_tail_init(&list, &mchan->free);
+ spin_unlock_irqrestore(&mchan->lock, irqflags);
+
+}
+
+/*
+ * Called once for each submitted descriptor.
+ * PM is locked once for each descriptor that is currently
+ * in execution.
+ */
+static void hidma_callback(void *data)
+{
+ struct hidma_desc *mdesc = data;
+ struct hidma_chan *mchan = to_hidma_chan(mdesc->desc.chan);
+ struct dma_device *ddev = mchan->chan.device;
+ struct hidma_dev *dmadev = to_hidma_dev(ddev);
+ unsigned long irqflags;
+ bool queued = false;
+
+ spin_lock_irqsave(&mchan->lock, irqflags);
+ if (mdesc->node.next) {
+ /* Delete from the active list, add to completed list */
+ list_move_tail(&mdesc->node, &mchan->completed);
+ queued = true;
+
+ /* calculate the next running descriptor */
+ mchan->running = list_first_entry(&mchan->active,
+ struct hidma_desc, node);
+ }
+ spin_unlock_irqrestore(&mchan->lock, irqflags);
+
+ hidma_process_completed(mchan);
+
+ if (queued) {
+ pm_runtime_mark_last_busy(dmadev->ddev.dev);
+ pm_runtime_put_autosuspend(dmadev->ddev.dev);
+ }
+}
+
+static int hidma_chan_init(struct hidma_dev *dmadev, u32 dma_sig)
+{
+ struct hidma_chan *mchan;
+ struct dma_device *ddev;
+
+ mchan = devm_kzalloc(dmadev->ddev.dev, sizeof(*mchan), GFP_KERNEL);
+ if (!mchan)
+ return -ENOMEM;
+
+ ddev = &dmadev->ddev;
+ mchan->dma_sig = dma_sig;
+ mchan->dmadev = dmadev;
+ mchan->chan.device = ddev;
+ dma_cookie_init(&mchan->chan);
+
+ INIT_LIST_HEAD(&mchan->free);
+ INIT_LIST_HEAD(&mchan->prepared);
+ INIT_LIST_HEAD(&mchan->active);
+ INIT_LIST_HEAD(&mchan->completed);
+
+ spin_lock_init(&mchan->lock);
+ list_add_tail(&mchan->chan.device_node, &ddev->channels);
+ dmadev->ddev.chancnt++;
+ return 0;
+}
+
+static void hidma_issue_task(unsigned long arg)
+{
+ struct hidma_dev *dmadev = (struct hidma_dev *)arg;
+
+ pm_runtime_get_sync(dmadev->ddev.dev);
+ hidma_ll_start(dmadev->lldev);
+}
+
+static void hidma_issue_pending(struct dma_chan *dmach)
+{
+ struct hidma_chan *mchan = to_hidma_chan(dmach);
+ struct hidma_dev *dmadev = mchan->dmadev;
+ unsigned long flags;
+ int status;
+
+ spin_lock_irqsave(&mchan->lock, flags);
+ if (!mchan->running) {
+ struct hidma_desc *desc = list_first_entry(&mchan->active,
+ struct hidma_desc,
+ node);
+ mchan->running = desc;
+ }
+ spin_unlock_irqrestore(&mchan->lock, flags);
+
+ /* PM will be released in hidma_callback function. */
+ status = pm_runtime_get(dmadev->ddev.dev);
+ if (status < 0)
+ tasklet_schedule(&dmadev->task);
+ else
+ hidma_ll_start(dmadev->lldev);
+}
+
+static enum dma_status hidma_tx_status(struct dma_chan *dmach,
+ dma_cookie_t cookie,
+ struct dma_tx_state *txstate)
+{
+ struct hidma_chan *mchan = to_hidma_chan(dmach);
+ enum dma_status ret;
+
+ ret = dma_cookie_status(dmach, cookie, txstate);
+ if (ret == DMA_COMPLETE)
+ return ret;
+
+ if (mchan->paused && (ret == DMA_IN_PROGRESS)) {
+ unsigned long flags;
+ dma_cookie_t runcookie;
+
+ spin_lock_irqsave(&mchan->lock, flags);
+ if (mchan->running)
+ runcookie = mchan->running->desc.cookie;
+ else
+ runcookie = -EINVAL;
+
+ if (runcookie == cookie)
+ ret = DMA_PAUSED;
+
+ spin_unlock_irqrestore(&mchan->lock, flags);
+ }
+
+ return ret;
+}
+
+/*
+ * Submit descriptor to hardware.
+ * Lock the PM for each descriptor we are sending.
+ */
+static dma_cookie_t hidma_tx_submit(struct dma_async_tx_descriptor *txd)
+{
+ struct hidma_chan *mchan = to_hidma_chan(txd->chan);
+ struct hidma_dev *dmadev = mchan->dmadev;
+ struct hidma_desc *mdesc;
+ unsigned long irqflags;
+ dma_cookie_t cookie;
+
+ pm_runtime_get_sync(dmadev->ddev.dev);
+ if (!hidma_ll_isenabled(dmadev->lldev)) {
+ pm_runtime_mark_last_busy(dmadev->ddev.dev);
+ pm_runtime_put_autosuspend(dmadev->ddev.dev);
+ return -ENODEV;
+ }
+
+ mdesc = container_of(txd, struct hidma_desc, desc);
+ spin_lock_irqsave(&mchan->lock, irqflags);
+
+ /* Move descriptor to active */
+ list_move_tail(&mdesc->node, &mchan->active);
+
+ /* Update cookie */
+ cookie = dma_cookie_assign(txd);
+
+ hidma_ll_queue_request(dmadev->lldev, mdesc->tre_ch);
+ spin_unlock_irqrestore(&mchan->lock, irqflags);
+
+ return cookie;
+}
+
+static int hidma_alloc_chan_resources(struct dma_chan *dmach)
+{
+ struct hidma_chan *mchan = to_hidma_chan(dmach);
+ struct hidma_dev *dmadev = mchan->dmadev;
+ struct hidma_desc *mdesc, *tmp;
+ unsigned long irqflags;
+ LIST_HEAD(descs);
+ unsigned int i;
+ int rc = 0;
+
+ if (mchan->allocated)
+ return 0;
+
+ /* Alloc descriptors for this channel */
+ for (i = 0; i < dmadev->nr_descriptors; i++) {
+ mdesc = kzalloc(sizeof(struct hidma_desc), GFP_NOWAIT);
+ if (!mdesc) {
+ rc = -ENOMEM;
+ break;
+ }
+ dma_async_tx_descriptor_init(&mdesc->desc, dmach);
+ mdesc->desc.tx_submit = hidma_tx_submit;
+
+ rc = hidma_ll_request(dmadev->lldev, mchan->dma_sig,
+ "DMA engine", hidma_callback, mdesc,
+ &mdesc->tre_ch);
+ if (rc) {
+ dev_err(dmach->device->dev,
+ "channel alloc failed at %u\n", i);
+ kfree(mdesc);
+ break;
+ }
+ list_add_tail(&mdesc->node, &descs);
+ }
+
+ if (rc) {
+ /* return the allocated descriptors */
+ list_for_each_entry_safe(mdesc, tmp, &descs, node) {
+ hidma_ll_free(dmadev->lldev, mdesc->tre_ch);
+ kfree(mdesc);
+ }
+ return rc;
+ }
+
+ spin_lock_irqsave(&mchan->lock, irqflags);
+ list_splice_tail_init(&descs, &mchan->free);
+ mchan->allocated = true;
+ spin_unlock_irqrestore(&mchan->lock, irqflags);
+ return 1;
+}
+
+static struct dma_async_tx_descriptor *
+hidma_prep_dma_memcpy(struct dma_chan *dmach, dma_addr_t dest, dma_addr_t src,
+ size_t len, unsigned long flags)
+{
+ struct hidma_chan *mchan = to_hidma_chan(dmach);
+ struct hidma_desc *mdesc = NULL;
+ struct hidma_dev *mdma = mchan->dmadev;
+ unsigned long irqflags;
+
+ /* Get free descriptor */
+ spin_lock_irqsave(&mchan->lock, irqflags);
+ if (!list_empty(&mchan->free)) {
+ mdesc = list_first_entry(&mchan->free, struct hidma_desc, node);
+ list_del(&mdesc->node);
+ }
+ spin_unlock_irqrestore(&mchan->lock, irqflags);
+
+ if (!mdesc)
+ return NULL;
+
+ hidma_ll_set_transfer_params(mdma->lldev, mdesc->tre_ch,
+ src, dest, len, flags);
+
+ /* Place descriptor in prepared list */
+ spin_lock_irqsave(&mchan->lock, irqflags);
+ list_add_tail(&mdesc->node, &mchan->prepared);
+ spin_unlock_irqrestore(&mchan->lock, irqflags);
+
+ return &mdesc->desc;
+}
+
+static int hidma_terminate_channel(struct dma_chan *chan)
+{
+ struct hidma_chan *mchan = to_hidma_chan(chan);
+ struct hidma_dev *dmadev = to_hidma_dev(mchan->chan.device);
+ struct hidma_desc *tmp, *mdesc;
+ unsigned long irqflags;
+ LIST_HEAD(list);
+ int rc;
+
+ pm_runtime_get_sync(dmadev->ddev.dev);
+ /* give completed requests a chance to finish */
+ hidma_process_completed(mchan);
+
+ spin_lock_irqsave(&mchan->lock, irqflags);
+ list_splice_init(&mchan->active, &list);
+ list_splice_init(&mchan->prepared, &list);
+ list_splice_init(&mchan->completed, &list);
+ spin_unlock_irqrestore(&mchan->lock, irqflags);
+
+ /* this suspends the existing transfer */
+ rc = hidma_ll_pause(dmadev->lldev);
+ if (rc) {
+ dev_err(dmadev->ddev.dev, "channel did not pause\n");
+ goto out;
+ }
+
+ /* return all user requests */
+ list_for_each_entry_safe(mdesc, tmp, &list, node) {
+ struct dma_async_tx_descriptor *txd = &mdesc->desc;
+ dma_async_tx_callback callback = mdesc->desc.callback;
+ void *param = mdesc->desc.callback_param;
+
+ dma_descriptor_unmap(txd);
+
+ if (callback)
+ callback(param);
+
+ dma_run_dependencies(txd);
+
+ /* move myself to free_list */
+ list_move(&mdesc->node, &mchan->free);
+ }
+
+ rc = hidma_ll_resume(dmadev->lldev);
+out:
+ pm_runtime_mark_last_busy(dmadev->ddev.dev);
+ pm_runtime_put_autosuspend(dmadev->ddev.dev);
+ return rc;
+}
+
+static int hidma_terminate_all(struct dma_chan *chan)
+{
+ struct hidma_chan *mchan = to_hidma_chan(chan);
+ struct hidma_dev *dmadev = to_hidma_dev(mchan->chan.device);
+ int rc;
+
+ rc = hidma_terminate_channel(chan);
+ if (rc)
+ return rc;
+
+ /* reinitialize the hardware */
+ pm_runtime_get_sync(dmadev->ddev.dev);
+ rc = hidma_ll_setup(dmadev->lldev);
+ pm_runtime_mark_last_busy(dmadev->ddev.dev);
+ pm_runtime_put_autosuspend(dmadev->ddev.dev);
+ return rc;
+}
+
+static void hidma_free_chan_resources(struct dma_chan *dmach)
+{
+ struct hidma_chan *mchan = to_hidma_chan(dmach);
+ struct hidma_dev *mdma = mchan->dmadev;
+ struct hidma_desc *mdesc, *tmp;
+ unsigned long irqflags;
+ LIST_HEAD(descs);
+
+ /* terminate running transactions and free descriptors */
+ hidma_terminate_channel(dmach);
+
+ spin_lock_irqsave(&mchan->lock, irqflags);
+
+ /* Move data */
+ list_splice_tail_init(&mchan->free, &descs);
+
+ /* Free descriptors */
+ list_for_each_entry_safe(mdesc, tmp, &descs, node) {
+ hidma_ll_free(mdma->lldev, mdesc->tre_ch);
+ list_del(&mdesc->node);
+ kfree(mdesc);
+ }
+
+ mchan->allocated = 0;
+ spin_unlock_irqrestore(&mchan->lock, irqflags);
+}
+
+static int hidma_pause(struct dma_chan *chan)
+{
+ struct hidma_chan *mchan;
+ struct hidma_dev *dmadev;
+
+ mchan = to_hidma_chan(chan);
+ dmadev = to_hidma_dev(mchan->chan.device);
+ if (!mchan->paused) {
+ pm_runtime_get_sync(dmadev->ddev.dev);
+ if (hidma_ll_pause(dmadev->lldev))
+ dev_warn(dmadev->ddev.dev, "channel did not stop\n");
+ mchan->paused = true;
+ pm_runtime_mark_last_busy(dmadev->ddev.dev);
+ pm_runtime_put_autosuspend(dmadev->ddev.dev);
+ }
+ return 0;
+}
+
+static int hidma_resume(struct dma_chan *chan)
+{
+ struct hidma_chan *mchan;
+ struct hidma_dev *dmadev;
+ int rc = 0;
+
+ mchan = to_hidma_chan(chan);
+ dmadev = to_hidma_dev(mchan->chan.device);
+ if (mchan->paused) {
+ pm_runtime_get_sync(dmadev->ddev.dev);
+ rc = hidma_ll_resume(dmadev->lldev);
+ if (!rc)
+ mchan->paused = false;
+ else
+ dev_err(dmadev->ddev.dev,
+ "failed to resume the channel");
+ pm_runtime_mark_last_busy(dmadev->ddev.dev);
+ pm_runtime_put_autosuspend(dmadev->ddev.dev);
+ }
+ return rc;
+}
+
+static irqreturn_t hidma_chirq_handler(int chirq, void *arg)
+{
+ struct hidma_lldev *lldev = arg;
+
+ /*
+ * All interrupts are request driven.
+ * HW doesn't send an interrupt by itself.
+ */
+ return hidma_ll_inthandler(chirq, lldev);
+}
+
+static int hidma_probe(struct platform_device *pdev)
+{
+ struct hidma_dev *dmadev;
+ struct resource *trca_resource;
+ struct resource *evca_resource;
+ int chirq;
+ int current_channel_index = atomic_read(&channel_ref_count);
+ void __iomem *evca;
+ void __iomem *trca;
+ int rc;
+
+ pm_runtime_set_autosuspend_delay(&pdev->dev, HIDMA_AUTOSUSPEND_TIMEOUT);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
+ trca_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ trca = devm_ioremap_resource(&pdev->dev, trca_resource);
+ if (IS_ERR(trca)) {
+ rc = -ENOMEM;
+ goto bailout;
+ }
+
+ evca_resource = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ evca = devm_ioremap_resource(&pdev->dev, evca_resource);
+ if (IS_ERR(evca)) {
+ rc = -ENOMEM;
+ goto bailout;
+ }
+
+ /*
+ * This driver only handles the channel IRQs.
+ * Common IRQ is handled by the management driver.
+ */
+ chirq = platform_get_irq(pdev, 0);
+ if (chirq < 0) {
+ rc = -ENODEV;
+ goto bailout;
+ }
+
+ dmadev = devm_kzalloc(&pdev->dev, sizeof(*dmadev), GFP_KERNEL);
+ if (!dmadev) {
+ rc = -ENOMEM;
+ goto bailout;
+ }
+
+ INIT_LIST_HEAD(&dmadev->ddev.channels);
+ spin_lock_init(&dmadev->lock);
+ dmadev->ddev.dev = &pdev->dev;
+ pm_runtime_get_sync(dmadev->ddev.dev);
+
+ dma_cap_set(DMA_MEMCPY, dmadev->ddev.cap_mask);
+ if (WARN_ON(!pdev->dev.dma_mask)) {
+ rc = -ENXIO;
+ goto dmafree;
+ }
+
+ dmadev->dev_evca = evca;
+ dmadev->evca_resource = evca_resource;
+ dmadev->dev_trca = trca;
+ dmadev->trca_resource = trca_resource;
+ dmadev->ddev.device_prep_dma_memcpy = hidma_prep_dma_memcpy;
+ dmadev->ddev.device_alloc_chan_resources = hidma_alloc_chan_resources;
+ dmadev->ddev.device_free_chan_resources = hidma_free_chan_resources;
+ dmadev->ddev.device_tx_status = hidma_tx_status;
+ dmadev->ddev.device_issue_pending = hidma_issue_pending;
+ dmadev->ddev.device_pause = hidma_pause;
+ dmadev->ddev.device_resume = hidma_resume;
+ dmadev->ddev.device_terminate_all = hidma_terminate_all;
+ dmadev->ddev.copy_align = 8;
+
+ device_property_read_u32(&pdev->dev, "desc-count",
+ &dmadev->nr_descriptors);
+
+ if (!dmadev->nr_descriptors && nr_desc_prm)
+ dmadev->nr_descriptors = nr_desc_prm;
+
+ if (!dmadev->nr_descriptors) {
+ rc = -EINVAL;
+ goto dmafree;
+ }
+
+ if (current_channel_index > HIDMA_MAX_CHANNELS) {
+ rc = -EINVAL;
+ goto dmafree;
+ }
+
+ dmadev->chidx = -1;
+ device_property_read_u32(&pdev->dev, "channel-index", &dmadev->chidx);
+
+ /* kernel command line override for the guest machine */
+ if (channel_idx[current_channel_index] != -1)
+ dmadev->chidx = channel_idx[current_channel_index];
+
+ if (dmadev->chidx == -1) {
+ rc = -EINVAL;
+ goto dmafree;
+ }
+
+ /* Set DMA mask to 64 bits. */
+ rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+ if (rc) {
+ dev_warn(&pdev->dev, "unable to set coherent mask to 64");
+ rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+ if (rc)
+ goto dmafree;
+ }
+
+ dmadev->lldev = hidma_ll_init(dmadev->ddev.dev,
+ dmadev->nr_descriptors, dmadev->dev_trca,
+ dmadev->dev_evca, dmadev->chidx);
+ if (!dmadev->lldev) {
+ rc = -EPROBE_DEFER;
+ goto dmafree;
+ }
+
+ rc = devm_request_irq(&pdev->dev, chirq, hidma_chirq_handler, 0,
+ "qcom-hidma", dmadev->lldev);
+ if (rc)
+ goto uninit;
+
+ INIT_LIST_HEAD(&dmadev->ddev.channels);
+ rc = hidma_chan_init(dmadev, 0);
+ if (rc)
+ goto uninit;
+
+ rc = dma_async_device_register(&dmadev->ddev);
+ if (rc)
+ goto uninit;
+
+ dmadev->irq = chirq;
+ tasklet_init(&dmadev->task, hidma_issue_task, (unsigned long)dmadev);
+ dev_info(&pdev->dev, "HI-DMA engine driver registration complete\n");
+ platform_set_drvdata(pdev, dmadev);
+ pm_runtime_mark_last_busy(dmadev->ddev.dev);
+ pm_runtime_put_autosuspend(dmadev->ddev.dev);
+ atomic_inc(&channel_ref_count);
+ return 0;
+
+uninit:
+ hidma_ll_uninit(dmadev->lldev);
+dmafree:
+ if (dmadev)
+ hidma_free(dmadev);
+bailout:
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ return rc;
+}
+
+static int hidma_remove(struct platform_device *pdev)
+{
+ struct hidma_dev *dmadev = platform_get_drvdata(pdev);
+
+ pm_runtime_get_sync(dmadev->ddev.dev);
+ dma_async_device_unregister(&dmadev->ddev);
+ devm_free_irq(dmadev->ddev.dev, dmadev->irq, dmadev->lldev);
+ hidma_ll_uninit(dmadev->lldev);
+ hidma_free(dmadev);
+
+ dev_info(&pdev->dev, "HI-DMA engine removed\n");
+ pm_runtime_put_sync_suspend(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+#if IS_ENABLED(CONFIG_ACPI)
+static const struct acpi_device_id hidma_acpi_ids[] = {
+ {"QCOM8061"},
+ {},
+};
+#endif
+
+static const struct of_device_id hidma_match[] = {
+ {.compatible = "qcom,hidma-1.0",},
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, hidma_match);
+
+static struct platform_driver hidma_driver = {
+ .probe = hidma_probe,
+ .remove = hidma_remove,
+ .driver = {
+ .name = "hidma",
+ .of_match_table = hidma_match,
+ .acpi_match_table = ACPI_PTR(hidma_acpi_ids),
+ },
+};
+
+module_platform_driver(hidma_driver);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/dma/qcom/hidma.h b/drivers/dma/qcom/hidma.h
new file mode 100644
index 0000000..231e306
--- /dev/null
+++ b/drivers/dma/qcom/hidma.h
@@ -0,0 +1,160 @@
+/*
+ * Qualcomm Technologies HIDMA data structures
+ *
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef QCOM_HIDMA_H
+#define QCOM_HIDMA_H
+
+#include <linux/kfifo.h>
+#include <linux/interrupt.h>
+#include <linux/dmaengine.h>
+
+#define TRE_SIZE 32 /* each TRE is 32 bytes */
+#define TRE_CFG_IDX 0
+#define TRE_LEN_IDX 1
+#define TRE_SRC_LOW_IDX 2
+#define TRE_SRC_HI_IDX 3
+#define TRE_DEST_LOW_IDX 4
+#define TRE_DEST_HI_IDX 5
+
+struct hidma_tx_status {
+ u8 err_info; /* error record in this transfer */
+ u8 err_code; /* completion code */
+};
+
+struct hidma_tre {
+ atomic_t allocated; /* if this channel is allocated */
+ bool queued; /* flag whether this is pending */
+ u16 status; /* status */
+ u32 chidx; /* index of the tre */
+ u32 dma_sig; /* signature of the tre */
+ const char *dev_name; /* name of the device */
+ void (*callback)(void *data); /* requester callback */
+ void *data; /* Data associated with this channel*/
+ struct hidma_lldev *lldev; /* lldma device pointer */
+ u32 tre_local[TRE_SIZE / sizeof(u32) + 1]; /* TRE local copy */
+ u32 tre_index; /* the offset where this was written*/
+ u32 int_flags; /* interrupt flags */
+};
+
+struct hidma_lldev {
+ bool initialized; /* initialized flag */
+ u8 trch_state; /* trch_state of the device */
+ u8 evch_state; /* evch_state of the device */
+ u8 chidx; /* channel index in the core */
+ u32 nr_tres; /* max number of configs */
+ spinlock_t lock; /* reentrancy */
+ struct hidma_tre *trepool; /* trepool of user configs */
+ struct device *dev; /* device */
+ void __iomem *trca; /* Transfer Channel address */
+ void __iomem *evca; /* Event Channel address */
+ struct hidma_tre
+ **pending_tre_list; /* Pointers to pending TREs */
+ struct hidma_tx_status
+ *tx_status_list; /* Pointers to pending TREs status*/
+ s32 pending_tre_count; /* Number of TREs pending */
+
+ void *tre_ring; /* TRE ring */
+ dma_addr_t tre_ring_handle; /* TRE ring to be shared with HW */
+ u32 tre_ring_size; /* Byte size of the ring */
+ u32 tre_processed_off; /* last processed TRE */
+
+ void *evre_ring; /* EVRE ring */
+ dma_addr_t evre_ring_handle; /* EVRE ring to be shared with HW */
+ u32 evre_ring_size; /* Byte size of the ring */
+ u32 evre_processed_off; /* last processed EVRE */
+
+ u32 tre_write_offset; /* TRE write location */
+ struct tasklet_struct task; /* task delivering notifications */
+ DECLARE_KFIFO_PTR(handoff_fifo,
+ struct hidma_tre *); /* pending TREs FIFO */
+};
+
+struct hidma_desc {
+ struct dma_async_tx_descriptor desc;
+ /* link list node for this channel*/
+ struct list_head node;
+ u32 tre_ch;
+};
+
+struct hidma_chan {
+ bool paused;
+ bool allocated;
+ char dbg_name[16];
+ u32 dma_sig;
+
+ /*
+ * active descriptor on this channel
+ * It is used by the DMA complete notification to
+ * locate the descriptor that initiated the transfer.
+ */
+ struct dentry *debugfs;
+ struct dentry *stats;
+ struct hidma_dev *dmadev;
+ struct hidma_desc *running;
+
+ struct dma_chan chan;
+ struct list_head free;
+ struct list_head prepared;
+ struct list_head active;
+ struct list_head completed;
+
+ /* Lock for this structure */
+ spinlock_t lock;
+};
+
+struct hidma_dev {
+ int irq;
+ int chidx;
+ u32 nr_descriptors;
+
+ struct hidma_lldev *lldev;
+ void __iomem *dev_trca;
+ struct resource *trca_resource;
+ void __iomem *dev_evca;
+ struct resource *evca_resource;
+
+ /* used to protect the pending channel list*/
+ spinlock_t lock;
+ struct dma_device ddev;
+
+ struct dentry *debugfs;
+ struct dentry *stats;
+
+ /* Task delivering issue_pending */
+ struct tasklet_struct task;
+};
+
+int hidma_ll_request(struct hidma_lldev *llhndl, u32 dev_id,
+ const char *dev_name,
+ void (*callback)(void *data), void *data, u32 *tre_ch);
+
+void hidma_ll_free(struct hidma_lldev *llhndl, u32 tre_ch);
+enum dma_status hidma_ll_status(struct hidma_lldev *llhndl, u32 tre_ch);
+bool hidma_ll_isenabled(struct hidma_lldev *llhndl);
+void hidma_ll_queue_request(struct hidma_lldev *llhndl, u32 tre_ch);
+void hidma_ll_start(struct hidma_lldev *llhndl);
+int hidma_ll_pause(struct hidma_lldev *llhndl);
+int hidma_ll_resume(struct hidma_lldev *llhndl);
+void hidma_ll_set_transfer_params(struct hidma_lldev *llhndl, u32 tre_ch,
+ dma_addr_t src, dma_addr_t dest, u32 len, u32 flags);
+int hidma_ll_setup(struct hidma_lldev *lldev);
+struct hidma_lldev *hidma_ll_init(struct device *dev, u32 max_channels,
+ void __iomem *trca, void __iomem *evca,
+ u8 chidx);
+int hidma_ll_uninit(struct hidma_lldev *llhndl);
+irqreturn_t hidma_ll_inthandler(int irq, void *arg);
+void hidma_cleanup_pending_tre(struct hidma_lldev *llhndl, u8 err_info,
+ u8 err_code);
+#endif
--
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH V10 4/7] dma: add Qualcomm Technologies HIDMA channel driver
@ 2015-12-17 17:01 ` Sinan Kaya
0 siblings, 0 replies; 35+ messages in thread
From: Sinan Kaya @ 2015-12-17 17:01 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds support for hidma engine. The driver consists of two
logical blocks. The DMA engine interface and the low-level interface.
The hardware only supports memcpy/memset and this driver only support
memcpy interface. HW and driver doesn't support slave interface.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
drivers/dma/qcom/Kconfig | 10 +
drivers/dma/qcom/hidma.c | 744 +++++++++++++++++++++++++++++++++++++++++++++++
drivers/dma/qcom/hidma.h | 160 ++++++++++
3 files changed, 914 insertions(+)
create mode 100644 drivers/dma/qcom/hidma.c
create mode 100644 drivers/dma/qcom/hidma.h
diff --git a/drivers/dma/qcom/Kconfig b/drivers/dma/qcom/Kconfig
index ebe5b8c..5588e1c 100644
--- a/drivers/dma/qcom/Kconfig
+++ b/drivers/dma/qcom/Kconfig
@@ -17,3 +17,13 @@ config QCOM_HIDMA_MGMT
start managing the channels. In a virtualized environment,
the guest OS would run QCOM_HIDMA channel driver and the
hypervisor would run the QCOM_HIDMA_MGMT management driver.
+
+config QCOM_HIDMA
+ tristate "Qualcomm Technologies HIDMA Channel support"
+ select DMA_ENGINE
+ help
+ Enable support for the Qualcomm Technologies HIDMA controller.
+ The HIDMA controller supports optimized buffer copies
+ (user to kernel, kernel to kernel, etc.). It only supports
+ memcpy interface. The core is not intended for general
+ purpose slave DMA.
diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
new file mode 100644
index 0000000..f8960f1
--- /dev/null
+++ b/drivers/dma/qcom/hidma.c
@@ -0,0 +1,744 @@
+/*
+ * Qualcomm Technologies HIDMA DMA engine interface
+ *
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Copyright (C) Freescale Semicondutor, Inc. 2007, 2008.
+ * Copyright (C) Semihalf 2009
+ * Copyright (C) Ilya Yanok, Emcraft Systems 2010
+ * Copyright (C) Alexander Popov, Promcontroller 2014
+ *
+ * Written by Piotr Ziecik <kosmo@semihalf.com>. Hardware description
+ * (defines, structures and comments) was taken from MPC5121 DMA driver
+ * written by Hongjun Chen <hong-jun.chen@freescale.com>.
+ *
+ * Approved as OSADL project by a majority of OSADL members and funded
+ * by OSADL membership fees in 2009; for details see www.osadl.org.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called COPYING.
+ */
+
+/* Linux Foundation elects GPLv2 license only. */
+
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/of_dma.h>
+#include <linux/property.h>
+#include <linux/delay.h>
+#include <linux/acpi.h>
+#include <linux/irq.h>
+#include <linux/atomic.h>
+#include <linux/pm_runtime.h>
+
+#include "../dmaengine.h"
+#include "hidma.h"
+
+/*
+ * Default idle time is 2 seconds. This parameter can
+ * be overridden by changing the following
+ * /sys/bus/platform/devices/QCOM8061:<xy>/power/autosuspend_delay_ms
+ * during kernel boot.
+ */
+#define HIDMA_AUTOSUSPEND_TIMEOUT 2000
+#define HIDMA_ERR_INFO_SW 0xFF
+#define HIDMA_ERR_CODE_UNEXPECTED_TERMINATE 0x0
+
+static inline struct hidma_dev *to_hidma_dev(struct dma_device *dmadev)
+{
+ return container_of(dmadev, struct hidma_dev, ddev);
+}
+
+static inline
+struct hidma_dev *to_hidma_dev_from_lldev(struct hidma_lldev **_lldevp)
+{
+ return container_of(_lldevp, struct hidma_dev, lldev);
+}
+
+static inline struct hidma_chan *to_hidma_chan(struct dma_chan *dmach)
+{
+ return container_of(dmach, struct hidma_chan, chan);
+}
+
+static inline
+struct hidma_desc *to_hidma_desc(struct dma_async_tx_descriptor *t)
+{
+ return container_of(t, struct hidma_desc, desc);
+}
+
+static void hidma_free(struct hidma_dev *dmadev)
+{
+ INIT_LIST_HEAD(&dmadev->ddev.channels);
+}
+
+static unsigned int nr_desc_prm;
+module_param(nr_desc_prm, uint, 0644);
+MODULE_PARM_DESC(nr_desc_prm, "number of descriptors (default: 0)");
+
+#define HIDMA_MAX_CHANNELS 64
+static int channel_idx[HIDMA_MAX_CHANNELS] = {
+ [0 ... (HIDMA_MAX_CHANNELS - 1)] = -1
+};
+
+/*
+ * Each DMA channel is associated with an event channel for interrupt
+ * delivery. The event channel index usually comes from the firmware through
+ * ACPI/DT. When a HIDMA channel is executed in the guest machine context (QEMU)
+ * the device tree gets auto-generated based on the memory and IRQ resources
+ * this driver uses on the host machine. Any device specific paraemeter such as
+ * channel-index gets ignored by the QEMU.
+ * We are using this command line parameter to pass the event channel index to
+ * the guest machine.
+ */
+static unsigned int num_channel_idx;
+module_param_array_named(channel_idx, channel_idx, int, &num_channel_idx,
+ 0644);
+MODULE_PARM_DESC(channel_idx, "channel index array for the notifications");
+static atomic_t channel_ref_count;
+
+/* process completed descriptors */
+static void hidma_process_completed(struct hidma_chan *mchan)
+{
+ struct dma_device *ddev = mchan->chan.device;
+ struct hidma_dev *mdma = to_hidma_dev(ddev);
+ struct dma_async_tx_descriptor *desc;
+ dma_cookie_t last_cookie;
+ struct hidma_desc *mdesc;
+ unsigned long irqflags;
+ struct list_head list;
+
+ INIT_LIST_HEAD(&list);
+
+ /* Get all completed descriptors */
+ spin_lock_irqsave(&mchan->lock, irqflags);
+ list_splice_tail_init(&mchan->completed, &list);
+ spin_unlock_irqrestore(&mchan->lock, irqflags);
+
+ /* Execute callbacks and run dependencies */
+ list_for_each_entry(mdesc, &list, node) {
+ enum dma_status llstat;
+
+ desc = &mdesc->desc;
+
+ spin_lock_irqsave(&mchan->lock, irqflags);
+ dma_cookie_complete(desc);
+ spin_unlock_irqrestore(&mchan->lock, irqflags);
+
+ llstat = hidma_ll_status(mdma->lldev, mdesc->tre_ch);
+ if (desc->callback && (llstat == DMA_COMPLETE))
+ desc->callback(desc->callback_param);
+
+ last_cookie = desc->cookie;
+ dma_run_dependencies(desc);
+ }
+
+ /* Free descriptors */
+ spin_lock_irqsave(&mchan->lock, irqflags);
+ list_splice_tail_init(&list, &mchan->free);
+ spin_unlock_irqrestore(&mchan->lock, irqflags);
+
+}
+
+/*
+ * Called once for each submitted descriptor.
+ * PM is locked once for each descriptor that is currently
+ * in execution.
+ */
+static void hidma_callback(void *data)
+{
+ struct hidma_desc *mdesc = data;
+ struct hidma_chan *mchan = to_hidma_chan(mdesc->desc.chan);
+ struct dma_device *ddev = mchan->chan.device;
+ struct hidma_dev *dmadev = to_hidma_dev(ddev);
+ unsigned long irqflags;
+ bool queued = false;
+
+ spin_lock_irqsave(&mchan->lock, irqflags);
+ if (mdesc->node.next) {
+ /* Delete from the active list, add to completed list */
+ list_move_tail(&mdesc->node, &mchan->completed);
+ queued = true;
+
+ /* calculate the next running descriptor */
+ mchan->running = list_first_entry(&mchan->active,
+ struct hidma_desc, node);
+ }
+ spin_unlock_irqrestore(&mchan->lock, irqflags);
+
+ hidma_process_completed(mchan);
+
+ if (queued) {
+ pm_runtime_mark_last_busy(dmadev->ddev.dev);
+ pm_runtime_put_autosuspend(dmadev->ddev.dev);
+ }
+}
+
+static int hidma_chan_init(struct hidma_dev *dmadev, u32 dma_sig)
+{
+ struct hidma_chan *mchan;
+ struct dma_device *ddev;
+
+ mchan = devm_kzalloc(dmadev->ddev.dev, sizeof(*mchan), GFP_KERNEL);
+ if (!mchan)
+ return -ENOMEM;
+
+ ddev = &dmadev->ddev;
+ mchan->dma_sig = dma_sig;
+ mchan->dmadev = dmadev;
+ mchan->chan.device = ddev;
+ dma_cookie_init(&mchan->chan);
+
+ INIT_LIST_HEAD(&mchan->free);
+ INIT_LIST_HEAD(&mchan->prepared);
+ INIT_LIST_HEAD(&mchan->active);
+ INIT_LIST_HEAD(&mchan->completed);
+
+ spin_lock_init(&mchan->lock);
+ list_add_tail(&mchan->chan.device_node, &ddev->channels);
+ dmadev->ddev.chancnt++;
+ return 0;
+}
+
+static void hidma_issue_task(unsigned long arg)
+{
+ struct hidma_dev *dmadev = (struct hidma_dev *)arg;
+
+ pm_runtime_get_sync(dmadev->ddev.dev);
+ hidma_ll_start(dmadev->lldev);
+}
+
+static void hidma_issue_pending(struct dma_chan *dmach)
+{
+ struct hidma_chan *mchan = to_hidma_chan(dmach);
+ struct hidma_dev *dmadev = mchan->dmadev;
+ unsigned long flags;
+ int status;
+
+ spin_lock_irqsave(&mchan->lock, flags);
+ if (!mchan->running) {
+ struct hidma_desc *desc = list_first_entry(&mchan->active,
+ struct hidma_desc,
+ node);
+ mchan->running = desc;
+ }
+ spin_unlock_irqrestore(&mchan->lock, flags);
+
+ /* PM will be released in hidma_callback function. */
+ status = pm_runtime_get(dmadev->ddev.dev);
+ if (status < 0)
+ tasklet_schedule(&dmadev->task);
+ else
+ hidma_ll_start(dmadev->lldev);
+}
+
+static enum dma_status hidma_tx_status(struct dma_chan *dmach,
+ dma_cookie_t cookie,
+ struct dma_tx_state *txstate)
+{
+ struct hidma_chan *mchan = to_hidma_chan(dmach);
+ enum dma_status ret;
+
+ ret = dma_cookie_status(dmach, cookie, txstate);
+ if (ret == DMA_COMPLETE)
+ return ret;
+
+ if (mchan->paused && (ret == DMA_IN_PROGRESS)) {
+ unsigned long flags;
+ dma_cookie_t runcookie;
+
+ spin_lock_irqsave(&mchan->lock, flags);
+ if (mchan->running)
+ runcookie = mchan->running->desc.cookie;
+ else
+ runcookie = -EINVAL;
+
+ if (runcookie == cookie)
+ ret = DMA_PAUSED;
+
+ spin_unlock_irqrestore(&mchan->lock, flags);
+ }
+
+ return ret;
+}
+
+/*
+ * Submit descriptor to hardware.
+ * Lock the PM for each descriptor we are sending.
+ */
+static dma_cookie_t hidma_tx_submit(struct dma_async_tx_descriptor *txd)
+{
+ struct hidma_chan *mchan = to_hidma_chan(txd->chan);
+ struct hidma_dev *dmadev = mchan->dmadev;
+ struct hidma_desc *mdesc;
+ unsigned long irqflags;
+ dma_cookie_t cookie;
+
+ pm_runtime_get_sync(dmadev->ddev.dev);
+ if (!hidma_ll_isenabled(dmadev->lldev)) {
+ pm_runtime_mark_last_busy(dmadev->ddev.dev);
+ pm_runtime_put_autosuspend(dmadev->ddev.dev);
+ return -ENODEV;
+ }
+
+ mdesc = container_of(txd, struct hidma_desc, desc);
+ spin_lock_irqsave(&mchan->lock, irqflags);
+
+ /* Move descriptor to active */
+ list_move_tail(&mdesc->node, &mchan->active);
+
+ /* Update cookie */
+ cookie = dma_cookie_assign(txd);
+
+ hidma_ll_queue_request(dmadev->lldev, mdesc->tre_ch);
+ spin_unlock_irqrestore(&mchan->lock, irqflags);
+
+ return cookie;
+}
+
+static int hidma_alloc_chan_resources(struct dma_chan *dmach)
+{
+ struct hidma_chan *mchan = to_hidma_chan(dmach);
+ struct hidma_dev *dmadev = mchan->dmadev;
+ struct hidma_desc *mdesc, *tmp;
+ unsigned long irqflags;
+ LIST_HEAD(descs);
+ unsigned int i;
+ int rc = 0;
+
+ if (mchan->allocated)
+ return 0;
+
+ /* Alloc descriptors for this channel */
+ for (i = 0; i < dmadev->nr_descriptors; i++) {
+ mdesc = kzalloc(sizeof(struct hidma_desc), GFP_NOWAIT);
+ if (!mdesc) {
+ rc = -ENOMEM;
+ break;
+ }
+ dma_async_tx_descriptor_init(&mdesc->desc, dmach);
+ mdesc->desc.tx_submit = hidma_tx_submit;
+
+ rc = hidma_ll_request(dmadev->lldev, mchan->dma_sig,
+ "DMA engine", hidma_callback, mdesc,
+ &mdesc->tre_ch);
+ if (rc) {
+ dev_err(dmach->device->dev,
+ "channel alloc failed at %u\n", i);
+ kfree(mdesc);
+ break;
+ }
+ list_add_tail(&mdesc->node, &descs);
+ }
+
+ if (rc) {
+ /* return the allocated descriptors */
+ list_for_each_entry_safe(mdesc, tmp, &descs, node) {
+ hidma_ll_free(dmadev->lldev, mdesc->tre_ch);
+ kfree(mdesc);
+ }
+ return rc;
+ }
+
+ spin_lock_irqsave(&mchan->lock, irqflags);
+ list_splice_tail_init(&descs, &mchan->free);
+ mchan->allocated = true;
+ spin_unlock_irqrestore(&mchan->lock, irqflags);
+ return 1;
+}
+
+static struct dma_async_tx_descriptor *
+hidma_prep_dma_memcpy(struct dma_chan *dmach, dma_addr_t dest, dma_addr_t src,
+ size_t len, unsigned long flags)
+{
+ struct hidma_chan *mchan = to_hidma_chan(dmach);
+ struct hidma_desc *mdesc = NULL;
+ struct hidma_dev *mdma = mchan->dmadev;
+ unsigned long irqflags;
+
+ /* Get free descriptor */
+ spin_lock_irqsave(&mchan->lock, irqflags);
+ if (!list_empty(&mchan->free)) {
+ mdesc = list_first_entry(&mchan->free, struct hidma_desc, node);
+ list_del(&mdesc->node);
+ }
+ spin_unlock_irqrestore(&mchan->lock, irqflags);
+
+ if (!mdesc)
+ return NULL;
+
+ hidma_ll_set_transfer_params(mdma->lldev, mdesc->tre_ch,
+ src, dest, len, flags);
+
+ /* Place descriptor in prepared list */
+ spin_lock_irqsave(&mchan->lock, irqflags);
+ list_add_tail(&mdesc->node, &mchan->prepared);
+ spin_unlock_irqrestore(&mchan->lock, irqflags);
+
+ return &mdesc->desc;
+}
+
+static int hidma_terminate_channel(struct dma_chan *chan)
+{
+ struct hidma_chan *mchan = to_hidma_chan(chan);
+ struct hidma_dev *dmadev = to_hidma_dev(mchan->chan.device);
+ struct hidma_desc *tmp, *mdesc;
+ unsigned long irqflags;
+ LIST_HEAD(list);
+ int rc;
+
+ pm_runtime_get_sync(dmadev->ddev.dev);
+ /* give completed requests a chance to finish */
+ hidma_process_completed(mchan);
+
+ spin_lock_irqsave(&mchan->lock, irqflags);
+ list_splice_init(&mchan->active, &list);
+ list_splice_init(&mchan->prepared, &list);
+ list_splice_init(&mchan->completed, &list);
+ spin_unlock_irqrestore(&mchan->lock, irqflags);
+
+ /* this suspends the existing transfer */
+ rc = hidma_ll_pause(dmadev->lldev);
+ if (rc) {
+ dev_err(dmadev->ddev.dev, "channel did not pause\n");
+ goto out;
+ }
+
+ /* return all user requests */
+ list_for_each_entry_safe(mdesc, tmp, &list, node) {
+ struct dma_async_tx_descriptor *txd = &mdesc->desc;
+ dma_async_tx_callback callback = mdesc->desc.callback;
+ void *param = mdesc->desc.callback_param;
+
+ dma_descriptor_unmap(txd);
+
+ if (callback)
+ callback(param);
+
+ dma_run_dependencies(txd);
+
+ /* move myself to free_list */
+ list_move(&mdesc->node, &mchan->free);
+ }
+
+ rc = hidma_ll_resume(dmadev->lldev);
+out:
+ pm_runtime_mark_last_busy(dmadev->ddev.dev);
+ pm_runtime_put_autosuspend(dmadev->ddev.dev);
+ return rc;
+}
+
+static int hidma_terminate_all(struct dma_chan *chan)
+{
+ struct hidma_chan *mchan = to_hidma_chan(chan);
+ struct hidma_dev *dmadev = to_hidma_dev(mchan->chan.device);
+ int rc;
+
+ rc = hidma_terminate_channel(chan);
+ if (rc)
+ return rc;
+
+ /* reinitialize the hardware */
+ pm_runtime_get_sync(dmadev->ddev.dev);
+ rc = hidma_ll_setup(dmadev->lldev);
+ pm_runtime_mark_last_busy(dmadev->ddev.dev);
+ pm_runtime_put_autosuspend(dmadev->ddev.dev);
+ return rc;
+}
+
+static void hidma_free_chan_resources(struct dma_chan *dmach)
+{
+ struct hidma_chan *mchan = to_hidma_chan(dmach);
+ struct hidma_dev *mdma = mchan->dmadev;
+ struct hidma_desc *mdesc, *tmp;
+ unsigned long irqflags;
+ LIST_HEAD(descs);
+
+ /* terminate running transactions and free descriptors */
+ hidma_terminate_channel(dmach);
+
+ spin_lock_irqsave(&mchan->lock, irqflags);
+
+ /* Move data */
+ list_splice_tail_init(&mchan->free, &descs);
+
+ /* Free descriptors */
+ list_for_each_entry_safe(mdesc, tmp, &descs, node) {
+ hidma_ll_free(mdma->lldev, mdesc->tre_ch);
+ list_del(&mdesc->node);
+ kfree(mdesc);
+ }
+
+ mchan->allocated = 0;
+ spin_unlock_irqrestore(&mchan->lock, irqflags);
+}
+
+static int hidma_pause(struct dma_chan *chan)
+{
+ struct hidma_chan *mchan;
+ struct hidma_dev *dmadev;
+
+ mchan = to_hidma_chan(chan);
+ dmadev = to_hidma_dev(mchan->chan.device);
+ if (!mchan->paused) {
+ pm_runtime_get_sync(dmadev->ddev.dev);
+ if (hidma_ll_pause(dmadev->lldev))
+ dev_warn(dmadev->ddev.dev, "channel did not stop\n");
+ mchan->paused = true;
+ pm_runtime_mark_last_busy(dmadev->ddev.dev);
+ pm_runtime_put_autosuspend(dmadev->ddev.dev);
+ }
+ return 0;
+}
+
+static int hidma_resume(struct dma_chan *chan)
+{
+ struct hidma_chan *mchan;
+ struct hidma_dev *dmadev;
+ int rc = 0;
+
+ mchan = to_hidma_chan(chan);
+ dmadev = to_hidma_dev(mchan->chan.device);
+ if (mchan->paused) {
+ pm_runtime_get_sync(dmadev->ddev.dev);
+ rc = hidma_ll_resume(dmadev->lldev);
+ if (!rc)
+ mchan->paused = false;
+ else
+ dev_err(dmadev->ddev.dev,
+ "failed to resume the channel");
+ pm_runtime_mark_last_busy(dmadev->ddev.dev);
+ pm_runtime_put_autosuspend(dmadev->ddev.dev);
+ }
+ return rc;
+}
+
+static irqreturn_t hidma_chirq_handler(int chirq, void *arg)
+{
+ struct hidma_lldev *lldev = arg;
+
+ /*
+ * All interrupts are request driven.
+ * HW doesn't send an interrupt by itself.
+ */
+ return hidma_ll_inthandler(chirq, lldev);
+}
+
+static int hidma_probe(struct platform_device *pdev)
+{
+ struct hidma_dev *dmadev;
+ struct resource *trca_resource;
+ struct resource *evca_resource;
+ int chirq;
+ int current_channel_index = atomic_read(&channel_ref_count);
+ void __iomem *evca;
+ void __iomem *trca;
+ int rc;
+
+ pm_runtime_set_autosuspend_delay(&pdev->dev, HIDMA_AUTOSUSPEND_TIMEOUT);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
+ trca_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ trca = devm_ioremap_resource(&pdev->dev, trca_resource);
+ if (IS_ERR(trca)) {
+ rc = -ENOMEM;
+ goto bailout;
+ }
+
+ evca_resource = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ evca = devm_ioremap_resource(&pdev->dev, evca_resource);
+ if (IS_ERR(evca)) {
+ rc = -ENOMEM;
+ goto bailout;
+ }
+
+ /*
+ * This driver only handles the channel IRQs.
+ * Common IRQ is handled by the management driver.
+ */
+ chirq = platform_get_irq(pdev, 0);
+ if (chirq < 0) {
+ rc = -ENODEV;
+ goto bailout;
+ }
+
+ dmadev = devm_kzalloc(&pdev->dev, sizeof(*dmadev), GFP_KERNEL);
+ if (!dmadev) {
+ rc = -ENOMEM;
+ goto bailout;
+ }
+
+ INIT_LIST_HEAD(&dmadev->ddev.channels);
+ spin_lock_init(&dmadev->lock);
+ dmadev->ddev.dev = &pdev->dev;
+ pm_runtime_get_sync(dmadev->ddev.dev);
+
+ dma_cap_set(DMA_MEMCPY, dmadev->ddev.cap_mask);
+ if (WARN_ON(!pdev->dev.dma_mask)) {
+ rc = -ENXIO;
+ goto dmafree;
+ }
+
+ dmadev->dev_evca = evca;
+ dmadev->evca_resource = evca_resource;
+ dmadev->dev_trca = trca;
+ dmadev->trca_resource = trca_resource;
+ dmadev->ddev.device_prep_dma_memcpy = hidma_prep_dma_memcpy;
+ dmadev->ddev.device_alloc_chan_resources = hidma_alloc_chan_resources;
+ dmadev->ddev.device_free_chan_resources = hidma_free_chan_resources;
+ dmadev->ddev.device_tx_status = hidma_tx_status;
+ dmadev->ddev.device_issue_pending = hidma_issue_pending;
+ dmadev->ddev.device_pause = hidma_pause;
+ dmadev->ddev.device_resume = hidma_resume;
+ dmadev->ddev.device_terminate_all = hidma_terminate_all;
+ dmadev->ddev.copy_align = 8;
+
+ device_property_read_u32(&pdev->dev, "desc-count",
+ &dmadev->nr_descriptors);
+
+ if (!dmadev->nr_descriptors && nr_desc_prm)
+ dmadev->nr_descriptors = nr_desc_prm;
+
+ if (!dmadev->nr_descriptors) {
+ rc = -EINVAL;
+ goto dmafree;
+ }
+
+ if (current_channel_index > HIDMA_MAX_CHANNELS) {
+ rc = -EINVAL;
+ goto dmafree;
+ }
+
+ dmadev->chidx = -1;
+ device_property_read_u32(&pdev->dev, "channel-index", &dmadev->chidx);
+
+ /* kernel command line override for the guest machine */
+ if (channel_idx[current_channel_index] != -1)
+ dmadev->chidx = channel_idx[current_channel_index];
+
+ if (dmadev->chidx == -1) {
+ rc = -EINVAL;
+ goto dmafree;
+ }
+
+ /* Set DMA mask to 64 bits. */
+ rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+ if (rc) {
+ dev_warn(&pdev->dev, "unable to set coherent mask to 64");
+ rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+ if (rc)
+ goto dmafree;
+ }
+
+ dmadev->lldev = hidma_ll_init(dmadev->ddev.dev,
+ dmadev->nr_descriptors, dmadev->dev_trca,
+ dmadev->dev_evca, dmadev->chidx);
+ if (!dmadev->lldev) {
+ rc = -EPROBE_DEFER;
+ goto dmafree;
+ }
+
+ rc = devm_request_irq(&pdev->dev, chirq, hidma_chirq_handler, 0,
+ "qcom-hidma", dmadev->lldev);
+ if (rc)
+ goto uninit;
+
+ INIT_LIST_HEAD(&dmadev->ddev.channels);
+ rc = hidma_chan_init(dmadev, 0);
+ if (rc)
+ goto uninit;
+
+ rc = dma_async_device_register(&dmadev->ddev);
+ if (rc)
+ goto uninit;
+
+ dmadev->irq = chirq;
+ tasklet_init(&dmadev->task, hidma_issue_task, (unsigned long)dmadev);
+ dev_info(&pdev->dev, "HI-DMA engine driver registration complete\n");
+ platform_set_drvdata(pdev, dmadev);
+ pm_runtime_mark_last_busy(dmadev->ddev.dev);
+ pm_runtime_put_autosuspend(dmadev->ddev.dev);
+ atomic_inc(&channel_ref_count);
+ return 0;
+
+uninit:
+ hidma_ll_uninit(dmadev->lldev);
+dmafree:
+ if (dmadev)
+ hidma_free(dmadev);
+bailout:
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ return rc;
+}
+
+static int hidma_remove(struct platform_device *pdev)
+{
+ struct hidma_dev *dmadev = platform_get_drvdata(pdev);
+
+ pm_runtime_get_sync(dmadev->ddev.dev);
+ dma_async_device_unregister(&dmadev->ddev);
+ devm_free_irq(dmadev->ddev.dev, dmadev->irq, dmadev->lldev);
+ hidma_ll_uninit(dmadev->lldev);
+ hidma_free(dmadev);
+
+ dev_info(&pdev->dev, "HI-DMA engine removed\n");
+ pm_runtime_put_sync_suspend(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+#if IS_ENABLED(CONFIG_ACPI)
+static const struct acpi_device_id hidma_acpi_ids[] = {
+ {"QCOM8061"},
+ {},
+};
+#endif
+
+static const struct of_device_id hidma_match[] = {
+ {.compatible = "qcom,hidma-1.0",},
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, hidma_match);
+
+static struct platform_driver hidma_driver = {
+ .probe = hidma_probe,
+ .remove = hidma_remove,
+ .driver = {
+ .name = "hidma",
+ .of_match_table = hidma_match,
+ .acpi_match_table = ACPI_PTR(hidma_acpi_ids),
+ },
+};
+
+module_platform_driver(hidma_driver);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/dma/qcom/hidma.h b/drivers/dma/qcom/hidma.h
new file mode 100644
index 0000000..231e306
--- /dev/null
+++ b/drivers/dma/qcom/hidma.h
@@ -0,0 +1,160 @@
+/*
+ * Qualcomm Technologies HIDMA data structures
+ *
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef QCOM_HIDMA_H
+#define QCOM_HIDMA_H
+
+#include <linux/kfifo.h>
+#include <linux/interrupt.h>
+#include <linux/dmaengine.h>
+
+#define TRE_SIZE 32 /* each TRE is 32 bytes */
+#define TRE_CFG_IDX 0
+#define TRE_LEN_IDX 1
+#define TRE_SRC_LOW_IDX 2
+#define TRE_SRC_HI_IDX 3
+#define TRE_DEST_LOW_IDX 4
+#define TRE_DEST_HI_IDX 5
+
+struct hidma_tx_status {
+ u8 err_info; /* error record in this transfer */
+ u8 err_code; /* completion code */
+};
+
+struct hidma_tre {
+ atomic_t allocated; /* if this channel is allocated */
+ bool queued; /* flag whether this is pending */
+ u16 status; /* status */
+ u32 chidx; /* index of the tre */
+ u32 dma_sig; /* signature of the tre */
+ const char *dev_name; /* name of the device */
+ void (*callback)(void *data); /* requester callback */
+ void *data; /* Data associated with this channel*/
+ struct hidma_lldev *lldev; /* lldma device pointer */
+ u32 tre_local[TRE_SIZE / sizeof(u32) + 1]; /* TRE local copy */
+ u32 tre_index; /* the offset where this was written*/
+ u32 int_flags; /* interrupt flags */
+};
+
+struct hidma_lldev {
+ bool initialized; /* initialized flag */
+ u8 trch_state; /* trch_state of the device */
+ u8 evch_state; /* evch_state of the device */
+ u8 chidx; /* channel index in the core */
+ u32 nr_tres; /* max number of configs */
+ spinlock_t lock; /* reentrancy */
+ struct hidma_tre *trepool; /* trepool of user configs */
+ struct device *dev; /* device */
+ void __iomem *trca; /* Transfer Channel address */
+ void __iomem *evca; /* Event Channel address */
+ struct hidma_tre
+ **pending_tre_list; /* Pointers to pending TREs */
+ struct hidma_tx_status
+ *tx_status_list; /* Pointers to pending TREs status*/
+ s32 pending_tre_count; /* Number of TREs pending */
+
+ void *tre_ring; /* TRE ring */
+ dma_addr_t tre_ring_handle; /* TRE ring to be shared with HW */
+ u32 tre_ring_size; /* Byte size of the ring */
+ u32 tre_processed_off; /* last processed TRE */
+
+ void *evre_ring; /* EVRE ring */
+ dma_addr_t evre_ring_handle; /* EVRE ring to be shared with HW */
+ u32 evre_ring_size; /* Byte size of the ring */
+ u32 evre_processed_off; /* last processed EVRE */
+
+ u32 tre_write_offset; /* TRE write location */
+ struct tasklet_struct task; /* task delivering notifications */
+ DECLARE_KFIFO_PTR(handoff_fifo,
+ struct hidma_tre *); /* pending TREs FIFO */
+};
+
+struct hidma_desc {
+ struct dma_async_tx_descriptor desc;
+ /* link list node for this channel*/
+ struct list_head node;
+ u32 tre_ch;
+};
+
+struct hidma_chan {
+ bool paused;
+ bool allocated;
+ char dbg_name[16];
+ u32 dma_sig;
+
+ /*
+ * active descriptor on this channel
+ * It is used by the DMA complete notification to
+ * locate the descriptor that initiated the transfer.
+ */
+ struct dentry *debugfs;
+ struct dentry *stats;
+ struct hidma_dev *dmadev;
+ struct hidma_desc *running;
+
+ struct dma_chan chan;
+ struct list_head free;
+ struct list_head prepared;
+ struct list_head active;
+ struct list_head completed;
+
+ /* Lock for this structure */
+ spinlock_t lock;
+};
+
+struct hidma_dev {
+ int irq;
+ int chidx;
+ u32 nr_descriptors;
+
+ struct hidma_lldev *lldev;
+ void __iomem *dev_trca;
+ struct resource *trca_resource;
+ void __iomem *dev_evca;
+ struct resource *evca_resource;
+
+ /* used to protect the pending channel list*/
+ spinlock_t lock;
+ struct dma_device ddev;
+
+ struct dentry *debugfs;
+ struct dentry *stats;
+
+ /* Task delivering issue_pending */
+ struct tasklet_struct task;
+};
+
+int hidma_ll_request(struct hidma_lldev *llhndl, u32 dev_id,
+ const char *dev_name,
+ void (*callback)(void *data), void *data, u32 *tre_ch);
+
+void hidma_ll_free(struct hidma_lldev *llhndl, u32 tre_ch);
+enum dma_status hidma_ll_status(struct hidma_lldev *llhndl, u32 tre_ch);
+bool hidma_ll_isenabled(struct hidma_lldev *llhndl);
+void hidma_ll_queue_request(struct hidma_lldev *llhndl, u32 tre_ch);
+void hidma_ll_start(struct hidma_lldev *llhndl);
+int hidma_ll_pause(struct hidma_lldev *llhndl);
+int hidma_ll_resume(struct hidma_lldev *llhndl);
+void hidma_ll_set_transfer_params(struct hidma_lldev *llhndl, u32 tre_ch,
+ dma_addr_t src, dma_addr_t dest, u32 len, u32 flags);
+int hidma_ll_setup(struct hidma_lldev *lldev);
+struct hidma_lldev *hidma_ll_init(struct device *dev, u32 max_channels,
+ void __iomem *trca, void __iomem *evca,
+ u8 chidx);
+int hidma_ll_uninit(struct hidma_lldev *llhndl);
+irqreturn_t hidma_ll_inthandler(int irq, void *arg);
+void hidma_cleanup_pending_tre(struct hidma_lldev *llhndl, u8 err_info,
+ u8 err_code);
+#endif
--
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [PATCH V10 5/7] dma: qcom_hidma: implement lower level hardware interface
2015-12-17 17:01 ` Sinan Kaya
@ 2015-12-17 17:01 ` Sinan Kaya
-1 siblings, 0 replies; 35+ messages in thread
From: Sinan Kaya @ 2015-12-17 17:01 UTC (permalink / raw)
To: dmaengine, mark.rutland, timur, devicetree, cov, vinod.koul, jcm
Cc: agross, arnd, linux-arm-msm, linux-arm-kernel, Sinan Kaya, linux-kernel
This patch implements the hardware hooks for the HIDMA channel driver.
The main functions of interest are:
- hidma_ll_init
- hidma_ll_request
- hidma_ll_queue_request
- hidma_ll_hw_start
OS layer calls the hidma_ll_init function during probe to set up the
hardware. At this moment, the number of supported descriptors are also
given. On each request, a descriptor is allocated from the free pool and
filled in with the transfer parameters. Multiple requests can be queued
into the hardware via the OS interface. When client is ready for requests
to be executed, start method is called.
Completions are delivered via callbacks via tasklet.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
drivers/dma/qcom/Makefile | 2 +
drivers/dma/qcom/hidma.h | 2 +-
drivers/dma/qcom/hidma_ll.c | 927 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 930 insertions(+), 1 deletion(-)
create mode 100644 drivers/dma/qcom/hidma_ll.c
diff --git a/drivers/dma/qcom/Makefile b/drivers/dma/qcom/Makefile
index bfea699..6bf9267 100644
--- a/drivers/dma/qcom/Makefile
+++ b/drivers/dma/qcom/Makefile
@@ -1,3 +1,5 @@
obj-$(CONFIG_QCOM_BAM_DMA) += bam_dma.o
obj-$(CONFIG_QCOM_HIDMA_MGMT) += hdma_mgmt.o
hdma_mgmt-objs := hidma_mgmt.o hidma_mgmt_sys.o
+obj-$(CONFIG_QCOM_HIDMA) += hdma.o
+hdma-objs := hidma_ll.o hidma.o
diff --git a/drivers/dma/qcom/hidma.h b/drivers/dma/qcom/hidma.h
index 231e306..1e09d7c 100644
--- a/drivers/dma/qcom/hidma.h
+++ b/drivers/dma/qcom/hidma.h
@@ -37,7 +37,7 @@ struct hidma_tre {
atomic_t allocated; /* if this channel is allocated */
bool queued; /* flag whether this is pending */
u16 status; /* status */
- u32 chidx; /* index of the tre */
+ u32 idx; /* index of the tre */
u32 dma_sig; /* signature of the tre */
const char *dev_name; /* name of the device */
void (*callback)(void *data); /* requester callback */
diff --git a/drivers/dma/qcom/hidma_ll.c b/drivers/dma/qcom/hidma_ll.c
new file mode 100644
index 0000000..0cd8d70
--- /dev/null
+++ b/drivers/dma/qcom/hidma_ll.c
@@ -0,0 +1,927 @@
+/*
+ * Qualcomm Technologies HIDMA DMA engine low level code
+ *
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/dmaengine.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/mm.h>
+#include <linux/highmem.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/atomic.h>
+#include <linux/iopoll.h>
+#include <linux/kfifo.h>
+#include <linux/bitops.h>
+
+#include "hidma.h"
+
+#define EVRE_SIZE 16 /* each EVRE is 16 bytes */
+
+#define TRCA_CTRLSTS_OFFSET 0x0
+#define TRCA_RING_LOW_OFFSET 0x8
+#define TRCA_RING_HIGH_OFFSET 0xC
+#define TRCA_RING_LEN_OFFSET 0x10
+#define TRCA_READ_PTR_OFFSET 0x18
+#define TRCA_WRITE_PTR_OFFSET 0x20
+#define TRCA_DOORBELL_OFFSET 0x400
+
+#define EVCA_CTRLSTS_OFFSET 0x0
+#define EVCA_INTCTRL_OFFSET 0x4
+#define EVCA_RING_LOW_OFFSET 0x8
+#define EVCA_RING_HIGH_OFFSET 0xC
+#define EVCA_RING_LEN_OFFSET 0x10
+#define EVCA_READ_PTR_OFFSET 0x18
+#define EVCA_WRITE_PTR_OFFSET 0x20
+#define EVCA_DOORBELL_OFFSET 0x400
+
+#define EVCA_IRQ_STAT_OFFSET 0x100
+#define EVCA_IRQ_CLR_OFFSET 0x108
+#define EVCA_IRQ_EN_OFFSET 0x110
+
+#define EVRE_CFG_IDX 0
+#define EVRE_LEN_IDX 1
+#define EVRE_DEST_LOW_IDX 2
+#define EVRE_DEST_HI_IDX 3
+
+#define EVRE_ERRINFO_BIT_POS 24
+#define EVRE_CODE_BIT_POS 28
+
+#define EVRE_ERRINFO_MASK GENMASK(3, 0)
+#define EVRE_CODE_MASK GENMASK(3, 0)
+
+#define CH_CONTROL_MASK GENMASK(7, 0)
+#define CH_STATE_MASK GENMASK(7, 0)
+#define CH_STATE_BIT_POS 0x8
+
+#define IRQ_EV_CH_EOB_IRQ_BIT_POS 0
+#define IRQ_EV_CH_WR_RESP_BIT_POS 1
+#define IRQ_TR_CH_TRE_RD_RSP_ER_BIT_POS 9
+#define IRQ_TR_CH_DATA_RD_ER_BIT_POS 10
+#define IRQ_TR_CH_DATA_WR_ER_BIT_POS 11
+#define IRQ_TR_CH_INVALID_TRE_BIT_POS 14
+
+#define ENABLE_IRQS (BIT(IRQ_EV_CH_EOB_IRQ_BIT_POS) | \
+ BIT(IRQ_EV_CH_WR_RESP_BIT_POS) | \
+ BIT(IRQ_TR_CH_TRE_RD_RSP_ER_BIT_POS) | \
+ BIT(IRQ_TR_CH_DATA_RD_ER_BIT_POS) | \
+ BIT(IRQ_TR_CH_DATA_WR_ER_BIT_POS) | \
+ BIT(IRQ_TR_CH_INVALID_TRE_BIT_POS))
+
+enum ch_command {
+ CH_DISABLE = 0,
+ CH_ENABLE = 1,
+ CH_SUSPEND = 2,
+ CH_RESET = 9,
+};
+
+enum ch_state {
+ CH_DISABLED = 0,
+ CH_ENABLED = 1,
+ CH_RUNNING = 2,
+ CH_SUSPENDED = 3,
+ CH_STOPPED = 4,
+ CH_ERROR = 5,
+ CH_IN_RESET = 9,
+};
+
+enum tre_type {
+ TRE_MEMCPY = 3,
+ TRE_MEMSET = 4,
+};
+
+enum evre_type {
+ EVRE_DMA_COMPLETE = 0x23,
+ EVRE_IMM_DATA = 0x24,
+};
+
+enum err_code {
+ EVRE_STATUS_COMPLETE = 1,
+ EVRE_STATUS_ERROR = 4,
+};
+
+void hidma_ll_free(struct hidma_lldev *lldev, u32 tre_ch)
+{
+ struct hidma_tre *tre;
+
+ if (tre_ch >= lldev->nr_tres) {
+ dev_err(lldev->dev, "invalid TRE number in free:%d", tre_ch);
+ return;
+ }
+
+ tre = &lldev->trepool[tre_ch];
+ if (atomic_read(&tre->allocated) != true) {
+ dev_err(lldev->dev, "trying to free an unused TRE:%d", tre_ch);
+ return;
+ }
+
+ atomic_set(&tre->allocated, 0);
+}
+
+int hidma_ll_request(struct hidma_lldev *lldev, u32 dma_sig,
+ const char *dev_name,
+ void (*callback)(void *data), void *data, u32 *tre_ch)
+{
+ unsigned int i;
+ struct hidma_tre *tre;
+ u32 *tre_local;
+
+ if (!tre_ch || !lldev)
+ return -EINVAL;
+
+ /* need to have at least one empty spot in the queue */
+ for (i = 0; i < lldev->nr_tres - 1; i++) {
+ if (atomic_add_unless(&lldev->trepool[i].allocated, 1, 1))
+ break;
+ }
+
+ if (i == (lldev->nr_tres - 1))
+ return -ENOMEM;
+
+ tre = &lldev->trepool[i];
+ tre->dma_sig = dma_sig;
+ tre->dev_name = dev_name;
+ tre->callback = callback;
+ tre->data = data;
+ tre->idx = i;
+ tre->status = 0;
+ tre->queued = 0;
+ lldev->tx_status_list[i].err_code = 0;
+ tre->lldev = lldev;
+ tre_local = &tre->tre_local[0];
+ tre_local[TRE_CFG_IDX] = TRE_MEMCPY;
+ tre_local[TRE_CFG_IDX] |= (lldev->chidx & 0xFF) << 8;
+ tre_local[TRE_CFG_IDX] |= BIT(16); /* set IEOB */
+ *tre_ch = i;
+ if (callback)
+ callback(data);
+ return 0;
+}
+
+/*
+ * Multiple TREs may be queued and waiting in the
+ * pending queue.
+ */
+static void hidma_ll_tre_complete(unsigned long arg)
+{
+ struct hidma_lldev *lldev = (struct hidma_lldev *)arg;
+ struct hidma_tre *tre;
+
+ while (kfifo_out(&lldev->handoff_fifo, &tre, 1)) {
+ /* call the user if it has been read by the hardware */
+ if (tre->callback)
+ tre->callback(tre->data);
+ }
+}
+
+/*
+ * Called to handle the interrupt for the channel.
+ * Return a positive number if TRE or EVRE were consumed on this run.
+ * Return a positive number if there are pending TREs or EVREs.
+ * Return 0 if there is nothing to consume or no pending TREs/EVREs found.
+ */
+static int hidma_handle_tre_completion(struct hidma_lldev *lldev)
+{
+ struct hidma_tre *tre;
+ u32 evre_write_off;
+ u32 evre_ring_size = lldev->evre_ring_size;
+ u32 tre_ring_size = lldev->tre_ring_size;
+ u32 num_completed = 0, tre_iterator, evre_iterator;
+ unsigned long flags;
+
+ evre_write_off = readl_relaxed(lldev->evca + EVCA_WRITE_PTR_OFFSET);
+ tre_iterator = lldev->tre_processed_off;
+ evre_iterator = lldev->evre_processed_off;
+
+ if ((evre_write_off > evre_ring_size) ||
+ ((evre_write_off % EVRE_SIZE) != 0)) {
+ dev_err(lldev->dev, "HW reports invalid EVRE write offset\n");
+ return 0;
+ }
+
+ /*
+ * By the time control reaches here the number of EVREs and TREs
+ * may not match. Only consume the ones that hardware told us.
+ */
+ while ((evre_iterator != evre_write_off)) {
+ u32 *current_evre = lldev->evre_ring + evre_iterator;
+ u32 cfg;
+ u8 err_info;
+
+ spin_lock_irqsave(&lldev->lock, flags);
+ tre = lldev->pending_tre_list[tre_iterator / TRE_SIZE];
+ if (!tre) {
+ spin_unlock_irqrestore(&lldev->lock, flags);
+ dev_warn(lldev->dev,
+ "tre_index [%d] and tre out of sync\n",
+ tre_iterator / TRE_SIZE);
+ tre_iterator += TRE_SIZE;
+ if (tre_iterator >= tre_ring_size)
+ tre_iterator -= tre_ring_size;
+ evre_iterator += EVRE_SIZE;
+ if (evre_iterator >= evre_ring_size)
+ evre_iterator -= evre_ring_size;
+
+ continue;
+ }
+ lldev->pending_tre_list[tre->tre_index] = NULL;
+
+ /*
+ * Keep track of pending TREs that SW is expecting to receive
+ * from HW. We got one now. Decrement our counter.
+ */
+ lldev->pending_tre_count--;
+ if (lldev->pending_tre_count < 0) {
+ dev_warn(lldev->dev,
+ "tre count mismatch on completion");
+ lldev->pending_tre_count = 0;
+ }
+
+ spin_unlock_irqrestore(&lldev->lock, flags);
+
+ cfg = current_evre[EVRE_CFG_IDX];
+ err_info = cfg >> EVRE_ERRINFO_BIT_POS;
+ err_info &= EVRE_ERRINFO_MASK;
+ lldev->tx_status_list[tre->idx].err_info = err_info;
+ lldev->tx_status_list[tre->idx].err_code =
+ (cfg >> EVRE_CODE_BIT_POS) & EVRE_CODE_MASK;
+ tre->queued = 0;
+
+ kfifo_put(&lldev->handoff_fifo, tre);
+ tasklet_schedule(&lldev->task);
+
+ tre_iterator += TRE_SIZE;
+ if (tre_iterator >= tre_ring_size)
+ tre_iterator -= tre_ring_size;
+ evre_iterator += EVRE_SIZE;
+ if (evre_iterator >= evre_ring_size)
+ evre_iterator -= evre_ring_size;
+
+ /*
+ * Read the new event descriptor written by the HW.
+ * As we are processing the delivered events, other events
+ * get queued to the SW for processing.
+ */
+ evre_write_off =
+ readl_relaxed(lldev->evca + EVCA_WRITE_PTR_OFFSET);
+ num_completed++;
+ }
+
+ if (num_completed) {
+ u32 evre_read_off = (lldev->evre_processed_off +
+ EVRE_SIZE * num_completed);
+ u32 tre_read_off = (lldev->tre_processed_off +
+ TRE_SIZE * num_completed);
+
+ evre_read_off = evre_read_off % evre_ring_size;
+ tre_read_off = tre_read_off % tre_ring_size;
+
+ writel(evre_read_off, lldev->evca + EVCA_DOORBELL_OFFSET);
+
+ /* record the last processed tre offset */
+ lldev->tre_processed_off = tre_read_off;
+ lldev->evre_processed_off = evre_read_off;
+ }
+
+ return num_completed;
+}
+
+void hidma_cleanup_pending_tre(struct hidma_lldev *lldev, u8 err_info,
+ u8 err_code)
+{
+ u32 tre_iterator;
+ struct hidma_tre *tre;
+ u32 tre_ring_size = lldev->tre_ring_size;
+ int num_completed = 0;
+ u32 tre_read_off;
+ unsigned long flags;
+
+ tre_iterator = lldev->tre_processed_off;
+ while (lldev->pending_tre_count) {
+ int tre_index = tre_iterator / TRE_SIZE;
+
+ spin_lock_irqsave(&lldev->lock, flags);
+ tre = lldev->pending_tre_list[tre_index];
+ if (!tre) {
+ spin_unlock_irqrestore(&lldev->lock, flags);
+ tre_iterator += TRE_SIZE;
+ if (tre_iterator >= tre_ring_size)
+ tre_iterator -= tre_ring_size;
+ continue;
+ }
+ lldev->pending_tre_list[tre_index] = NULL;
+ lldev->pending_tre_count--;
+ if (lldev->pending_tre_count < 0) {
+ dev_warn(lldev->dev,
+ "tre count mismatch on completion");
+ lldev->pending_tre_count = 0;
+ }
+ spin_unlock_irqrestore(&lldev->lock, flags);
+
+ lldev->tx_status_list[tre->idx].err_info = err_info;
+ lldev->tx_status_list[tre->idx].err_code = err_code;
+ tre->queued = 0;
+
+ kfifo_put(&lldev->handoff_fifo, tre);
+ tasklet_schedule(&lldev->task);
+
+ tre_iterator += TRE_SIZE;
+ if (tre_iterator >= tre_ring_size)
+ tre_iterator -= tre_ring_size;
+
+ num_completed++;
+ }
+ tre_read_off = (lldev->tre_processed_off + TRE_SIZE * num_completed);
+
+ tre_read_off = tre_read_off % tre_ring_size;
+
+ /* record the last processed tre offset */
+ lldev->tre_processed_off = tre_read_off;
+}
+
+static int hidma_ll_reset(struct hidma_lldev *lldev)
+{
+ u32 val;
+ int ret;
+
+ val = readl(lldev->trca + TRCA_CTRLSTS_OFFSET);
+ val &= ~(CH_CONTROL_MASK << 16);
+ val |= CH_RESET << 16;
+ writel(val, lldev->trca + TRCA_CTRLSTS_OFFSET);
+
+ /*
+ * Delay 10ms after reset to allow DMA logic to quiesce.
+ * Do a polled read up to 1ms and 10ms maximum.
+ */
+ ret = readl_poll_timeout(lldev->trca + TRCA_CTRLSTS_OFFSET, val,
+ (((val >> CH_STATE_BIT_POS) & CH_STATE_MASK) ==
+ CH_DISABLED), 1000, 10000);
+ if (ret) {
+ dev_err(lldev->dev, "transfer channel did not reset\n");
+ return ret;
+ }
+
+ val = readl(lldev->evca + EVCA_CTRLSTS_OFFSET);
+ val &= ~(CH_CONTROL_MASK << 16);
+ val |= CH_RESET << 16;
+ writel(val, lldev->evca + EVCA_CTRLSTS_OFFSET);
+
+ /*
+ * Delay 10ms after reset to allow DMA logic to quiesce.
+ * Do a polled read up to 1ms and 10ms maximum.
+ */
+ ret = readl_poll_timeout(lldev->evca + EVCA_CTRLSTS_OFFSET, val,
+ (((val >> CH_STATE_BIT_POS) & CH_STATE_MASK) ==
+ CH_DISABLED), 1000, 10000);
+ if (ret)
+ return ret;
+
+ lldev->trch_state = CH_DISABLED;
+ lldev->evch_state = CH_DISABLED;
+ return 0;
+}
+
+static void hidma_ll_enable_irq(struct hidma_lldev *lldev, u32 irq_bits)
+{
+ writel(irq_bits, lldev->evca + EVCA_IRQ_EN_OFFSET);
+}
+
+/*
+ * The interrupt handler for HIDMA will try to consume as many pending
+ * EVRE from the event queue as possible. Each EVRE has an associated
+ * TRE that holds the user interface parameters. EVRE reports the
+ * result of the transaction. Hardware guarantees ordering between EVREs
+ * and TREs. We use last processed offset to figure out which TRE is
+ * associated with which EVRE. If two TREs are consumed by HW, the EVREs
+ * are in order in the event ring.
+ *
+ * This handler will do a one pass for consuming EVREs. Other EVREs may
+ * be delivered while we are working. It will try to consume incoming
+ * EVREs one more time and return.
+ *
+ * For unprocessed EVREs, hardware will trigger another interrupt until
+ * all the interrupt bits are cleared.
+ *
+ * Hardware guarantees that by the time interrupt is observed, all data
+ * transactions in flight are delivered to their respective places and
+ * are visible to the CPU.
+ *
+ * On demand paging for IOMMU is only supported for PCIe via PRI
+ * (Page Request Interface) not for HIDMA. All other hardware instances
+ * including HIDMA work on pinned DMA addresses.
+ *
+ * HIDMA is not aware of IOMMU presence since it follows the DMA API. All
+ * IOMMU latency will be built into the data movement time. By the time
+ * interrupt happens, IOMMU lookups + data movement has already taken place.
+ *
+ * While the first read in a typical PCI endpoint ISR flushes all outstanding
+ * requests traditionally to the destination, this concept does not apply
+ * here for this HW.
+ */
+static void hidma_ll_int_handler_internal(struct hidma_lldev *lldev)
+{
+ u32 status;
+ u32 enable;
+ u32 cause;
+ int repeat = 2;
+ unsigned long timeout;
+
+ /*
+ * Fine tuned for this HW...
+ *
+ * This ISR has been designed for this particular hardware. Relaxed
+ * read and write accessors are used for performance reasons due to
+ * interrupt delivery guarantees. Do not copy this code blindly and
+ * expect that to work.
+ */
+ status = readl_relaxed(lldev->evca + EVCA_IRQ_STAT_OFFSET);
+ enable = readl_relaxed(lldev->evca + EVCA_IRQ_EN_OFFSET);
+ cause = status & enable;
+
+ if ((cause & (BIT(IRQ_TR_CH_INVALID_TRE_BIT_POS))) ||
+ (cause & BIT(IRQ_TR_CH_TRE_RD_RSP_ER_BIT_POS)) ||
+ (cause & BIT(IRQ_EV_CH_WR_RESP_BIT_POS)) ||
+ (cause & BIT(IRQ_TR_CH_DATA_RD_ER_BIT_POS)) ||
+ (cause & BIT(IRQ_TR_CH_DATA_WR_ER_BIT_POS))) {
+ u8 err_code = EVRE_STATUS_ERROR;
+ u8 err_info = 0xFF;
+
+ /* Clear out pending interrupts */
+ writel(cause, lldev->evca + EVCA_IRQ_CLR_OFFSET);
+
+ dev_err(lldev->dev, "error 0x%x, resetting...\n", cause);
+
+ hidma_cleanup_pending_tre(lldev, err_info, err_code);
+
+ /* reset the channel for recovery */
+ if (hidma_ll_setup(lldev)) {
+ dev_err(lldev->dev,
+ "channel reinitialize failed after error\n");
+ return;
+ }
+ hidma_ll_enable_irq(lldev, ENABLE_IRQS);
+ return;
+ }
+
+ /*
+ * Try to consume as many EVREs as possible.
+ * skip this loop if the interrupt is spurious.
+ */
+ while (cause && repeat) {
+ unsigned long start = jiffies;
+
+ /* This timeout should be sufficent for core to finish */
+ timeout = start + msecs_to_jiffies(500);
+
+ while (lldev->pending_tre_count) {
+ hidma_handle_tre_completion(lldev);
+ if (time_is_before_jiffies(timeout)) {
+ dev_warn(lldev->dev,
+ "ISR timeout %lx-%lx from %lx [%d]\n",
+ jiffies, timeout, start,
+ lldev->pending_tre_count);
+ break;
+ }
+ }
+
+ /* We consumed TREs or there are pending TREs or EVREs. */
+ writel_relaxed(cause, lldev->evca + EVCA_IRQ_CLR_OFFSET);
+
+ /*
+ * Another interrupt might have arrived while we are
+ * processing this one. Read the new cause.
+ */
+ status = readl_relaxed(lldev->evca + EVCA_IRQ_STAT_OFFSET);
+ enable = readl_relaxed(lldev->evca + EVCA_IRQ_EN_OFFSET);
+ cause = status & enable;
+
+ repeat--;
+ }
+}
+
+static int hidma_ll_enable(struct hidma_lldev *lldev)
+{
+ u32 val;
+ int ret;
+
+ val = readl(lldev->evca + EVCA_CTRLSTS_OFFSET);
+ val &= ~(CH_CONTROL_MASK << 16);
+ val |= CH_ENABLE << 16;
+ writel(val, lldev->evca + EVCA_CTRLSTS_OFFSET);
+
+ ret = readl_poll_timeout(lldev->evca + EVCA_CTRLSTS_OFFSET, val,
+ ((((val >> CH_STATE_BIT_POS) & CH_STATE_MASK)
+ == CH_ENABLED)
+ ||
+ (((val >> CH_STATE_BIT_POS) & CH_STATE_MASK)
+ == CH_RUNNING)), 1000, 10000);
+ if (ret) {
+ dev_err(lldev->dev, "event channel did not get enabled\n");
+ return ret;
+ }
+
+ val = readl(lldev->trca + TRCA_CTRLSTS_OFFSET);
+ val &= ~(CH_CONTROL_MASK << 16);
+ val |= CH_ENABLE << 16;
+ writel(val, lldev->trca + TRCA_CTRLSTS_OFFSET);
+
+ ret = readl_poll_timeout(lldev->trca + TRCA_CTRLSTS_OFFSET, val,
+ ((((val >> CH_STATE_BIT_POS) & CH_STATE_MASK)
+ == CH_ENABLED)
+ ||
+ (((val >> CH_STATE_BIT_POS) & CH_STATE_MASK)
+ == CH_RUNNING)), 1000, 10000);
+ if (ret) {
+ dev_err(lldev->dev, "transfer channel did not get enabled\n");
+ return ret;
+ }
+
+ lldev->trch_state = CH_ENABLED;
+ lldev->evch_state = CH_ENABLED;
+
+ return 0;
+}
+
+int hidma_ll_resume(struct hidma_lldev *lldev)
+{
+ return hidma_ll_enable(lldev);
+}
+
+static void hidma_ll_hw_start(struct hidma_lldev *lldev)
+{
+ unsigned long irqflags;
+
+ spin_lock_irqsave(&lldev->lock, irqflags);
+ writel(lldev->tre_write_offset, lldev->trca + TRCA_DOORBELL_OFFSET);
+ spin_unlock_irqrestore(&lldev->lock, irqflags);
+}
+
+bool hidma_ll_isenabled(struct hidma_lldev *lldev)
+{
+ u32 val;
+
+ val = readl(lldev->trca + TRCA_CTRLSTS_OFFSET);
+ lldev->trch_state = (val >> CH_STATE_BIT_POS) & CH_STATE_MASK;
+ val = readl(lldev->evca + EVCA_CTRLSTS_OFFSET);
+ lldev->evch_state = (val >> CH_STATE_BIT_POS) & CH_STATE_MASK;
+
+ /* both channels have to be enabled before calling this function */
+ if (((lldev->trch_state == CH_ENABLED) ||
+ (lldev->trch_state == CH_RUNNING)) &&
+ ((lldev->evch_state == CH_ENABLED) ||
+ (lldev->evch_state == CH_RUNNING)))
+ return true;
+
+ return false;
+}
+
+void hidma_ll_queue_request(struct hidma_lldev *lldev, u32 tre_ch)
+{
+ struct hidma_tre *tre;
+ unsigned long flags;
+
+ tre = &lldev->trepool[tre_ch];
+
+ /* copy the TRE into its location in the TRE ring */
+ spin_lock_irqsave(&lldev->lock, flags);
+ tre->tre_index = lldev->tre_write_offset / TRE_SIZE;
+ lldev->pending_tre_list[tre->tre_index] = tre;
+ memcpy(lldev->tre_ring + lldev->tre_write_offset, &tre->tre_local[0],
+ TRE_SIZE);
+ lldev->tx_status_list[tre->idx].err_code = 0;
+ lldev->tx_status_list[tre->idx].err_info = 0;
+ tre->queued = 1;
+ lldev->pending_tre_count++;
+ lldev->tre_write_offset = (lldev->tre_write_offset + TRE_SIZE)
+ % lldev->tre_ring_size;
+ spin_unlock_irqrestore(&lldev->lock, flags);
+}
+
+void hidma_ll_start(struct hidma_lldev *lldev)
+{
+ hidma_ll_hw_start(lldev);
+}
+
+/*
+ * Note that even though we stop this channel
+ * if there is a pending transaction in flight
+ * it will complete and follow the callback.
+ * This request will prevent further requests
+ * to be made.
+ */
+int hidma_ll_pause(struct hidma_lldev *lldev)
+{
+ u32 val;
+ int ret;
+
+ val = readl(lldev->evca + EVCA_CTRLSTS_OFFSET);
+ lldev->evch_state = (val >> CH_STATE_BIT_POS) & CH_STATE_MASK;
+ val = readl(lldev->trca + TRCA_CTRLSTS_OFFSET);
+ lldev->trch_state = (val >> CH_STATE_BIT_POS) & CH_STATE_MASK;
+
+ /* already suspended by this OS */
+ if ((lldev->trch_state == CH_SUSPENDED) ||
+ (lldev->evch_state == CH_SUSPENDED))
+ return 0;
+
+ /* already stopped by the manager */
+ if ((lldev->trch_state == CH_STOPPED) ||
+ (lldev->evch_state == CH_STOPPED))
+ return 0;
+
+ val = readl(lldev->trca + TRCA_CTRLSTS_OFFSET);
+ val &= ~(CH_CONTROL_MASK << 16);
+ val |= CH_SUSPEND << 16;
+ writel(val, lldev->trca + TRCA_CTRLSTS_OFFSET);
+
+ /*
+ * Start the wait right after the suspend is confirmed.
+ * Do a polled read up to 1ms and 10ms maximum.
+ */
+ ret = readl_poll_timeout(lldev->trca + TRCA_CTRLSTS_OFFSET, val,
+ (((val >> CH_STATE_BIT_POS) & CH_STATE_MASK) ==
+ CH_SUSPENDED), 1000, 10000);
+ if (ret)
+ return ret;
+
+ val = readl(lldev->evca + EVCA_CTRLSTS_OFFSET);
+ val &= ~(CH_CONTROL_MASK << 16);
+ val |= CH_SUSPEND << 16;
+ writel(val, lldev->evca + EVCA_CTRLSTS_OFFSET);
+
+ /*
+ * Start the wait right after the suspend is confirmed
+ * Delay up to 10ms after reset to allow DMA logic to quiesce.
+ */
+ ret = readl_poll_timeout(lldev->evca + EVCA_CTRLSTS_OFFSET, val,
+ (((val >> CH_STATE_BIT_POS) & CH_STATE_MASK) ==
+ CH_SUSPENDED), 1000, 10000);
+ if (ret)
+ return ret;
+
+ lldev->trch_state = CH_SUSPENDED;
+ lldev->evch_state = CH_SUSPENDED;
+ return 0;
+}
+
+void hidma_ll_set_transfer_params(struct hidma_lldev *lldev, u32 tre_ch,
+ dma_addr_t src, dma_addr_t dest, u32 len,
+ u32 flags)
+{
+ struct hidma_tre *tre;
+ u32 *tre_local;
+
+ if (tre_ch >= lldev->nr_tres) {
+ dev_err(lldev->dev,
+ "invalid TRE number in transfer params:%d", tre_ch);
+ return;
+ }
+
+ tre = &lldev->trepool[tre_ch];
+ if (atomic_read(&tre->allocated) != true) {
+ dev_err(lldev->dev,
+ "trying to set params on an unused TRE:%d", tre_ch);
+ return;
+ }
+
+ tre_local = &tre->tre_local[0];
+ tre_local[TRE_LEN_IDX] = len;
+ tre_local[TRE_SRC_LOW_IDX] = lower_32_bits(src);
+ tre_local[TRE_SRC_HI_IDX] = upper_32_bits(src);
+ tre_local[TRE_DEST_LOW_IDX] = lower_32_bits(dest);
+ tre_local[TRE_DEST_HI_IDX] = upper_32_bits(dest);
+ tre->int_flags = flags;
+}
+
+/*
+ * Called during initialization and after an error condition
+ * to restore hardware state.
+ */
+int hidma_ll_setup(struct hidma_lldev *lldev)
+{
+ int rc;
+ u64 addr;
+ u32 val;
+ u32 nr_tres = lldev->nr_tres;
+
+ lldev->pending_tre_count = 0;
+ lldev->tre_processed_off = 0;
+ lldev->evre_processed_off = 0;
+ lldev->tre_write_offset = 0;
+
+ /* disable interrupts */
+ hidma_ll_enable_irq(lldev, 0);
+
+ /* clear all pending interrupts */
+ val = readl(lldev->evca + EVCA_IRQ_STAT_OFFSET);
+ writel(val, lldev->evca + EVCA_IRQ_CLR_OFFSET);
+
+ rc = hidma_ll_reset(lldev);
+ if (rc)
+ return rc;
+
+ /*
+ * Clear all pending interrupts again.
+ * Otherwise, we observe reset complete interrupts.
+ */
+ val = readl(lldev->evca + EVCA_IRQ_STAT_OFFSET);
+ writel(val, lldev->evca + EVCA_IRQ_CLR_OFFSET);
+
+ /* disable interrupts again after reset */
+ hidma_ll_enable_irq(lldev, 0);
+
+ addr = lldev->tre_ring_handle;
+ writel(lower_32_bits(addr), lldev->trca + TRCA_RING_LOW_OFFSET);
+ writel(upper_32_bits(addr), lldev->trca + TRCA_RING_HIGH_OFFSET);
+ writel(lldev->tre_ring_size, lldev->trca + TRCA_RING_LEN_OFFSET);
+
+ addr = lldev->evre_ring_handle;
+ writel(lower_32_bits(addr), lldev->evca + EVCA_RING_LOW_OFFSET);
+ writel(upper_32_bits(addr), lldev->evca + EVCA_RING_HIGH_OFFSET);
+ writel(EVRE_SIZE * nr_tres, lldev->evca + EVCA_RING_LEN_OFFSET);
+
+ /* support IRQ only for now */
+ val = readl(lldev->evca + EVCA_INTCTRL_OFFSET);
+ val &= ~0xF;
+ val |= 0x1;
+ writel(val, lldev->evca + EVCA_INTCTRL_OFFSET);
+
+ /* clear all pending interrupts and enable them */
+ writel(ENABLE_IRQS, lldev->evca + EVCA_IRQ_CLR_OFFSET);
+ hidma_ll_enable_irq(lldev, ENABLE_IRQS);
+
+ rc = hidma_ll_enable(lldev);
+ if (rc)
+ return rc;
+
+ return rc;
+}
+
+struct hidma_lldev *hidma_ll_init(struct device *dev, u32 nr_tres,
+ void __iomem *trca, void __iomem *evca,
+ u8 chidx)
+{
+ u32 required_bytes;
+ struct hidma_lldev *lldev;
+ int rc;
+
+ if (!trca || !evca || !dev || !nr_tres)
+ return NULL;
+
+ /* need at least four TREs */
+ if (nr_tres < 4)
+ return NULL;
+
+ /* need an extra space */
+ nr_tres += 1;
+
+ lldev = devm_kzalloc(dev, sizeof(struct hidma_lldev), GFP_KERNEL);
+ if (!lldev)
+ return NULL;
+
+ lldev->evca = evca;
+ lldev->trca = trca;
+ lldev->dev = dev;
+ required_bytes = sizeof(struct hidma_tre) * nr_tres;
+ lldev->trepool = devm_kzalloc(lldev->dev, required_bytes, GFP_KERNEL);
+ if (!lldev->trepool)
+ return NULL;
+
+ required_bytes = sizeof(lldev->pending_tre_list[0]) * nr_tres;
+ lldev->pending_tre_list = devm_kzalloc(dev, required_bytes, GFP_KERNEL);
+ if (!lldev->pending_tre_list)
+ return NULL;
+
+ required_bytes = sizeof(lldev->tx_status_list[0]) * nr_tres;
+ lldev->tx_status_list = devm_kzalloc(dev, required_bytes, GFP_KERNEL);
+ if (!lldev->tx_status_list)
+ return NULL;
+
+ lldev->tre_ring = dmam_alloc_coherent(dev, (TRE_SIZE + 1) * nr_tres,
+ &lldev->tre_ring_handle,
+ GFP_KERNEL);
+ if (!lldev->tre_ring)
+ return NULL;
+
+ memset(lldev->tre_ring, 0, (TRE_SIZE + 1) * nr_tres);
+ lldev->tre_ring_size = TRE_SIZE * nr_tres;
+ lldev->nr_tres = nr_tres;
+
+ /* the TRE ring has to be TRE_SIZE aligned */
+ if (!IS_ALIGNED(lldev->tre_ring_handle, TRE_SIZE)) {
+ u8 tre_ring_shift;
+
+ tre_ring_shift = lldev->tre_ring_handle % TRE_SIZE;
+ tre_ring_shift = TRE_SIZE - tre_ring_shift;
+ lldev->tre_ring_handle += tre_ring_shift;
+ lldev->tre_ring += tre_ring_shift;
+ }
+
+ lldev->evre_ring = dmam_alloc_coherent(dev, (EVRE_SIZE + 1) * nr_tres,
+ &lldev->evre_ring_handle,
+ GFP_KERNEL);
+ if (!lldev->evre_ring)
+ return NULL;
+
+ memset(lldev->evre_ring, 0, (EVRE_SIZE + 1) * nr_tres);
+ lldev->evre_ring_size = EVRE_SIZE * nr_tres;
+
+ /* the EVRE ring has to be EVRE_SIZE aligned */
+ if (!IS_ALIGNED(lldev->evre_ring_handle, EVRE_SIZE)) {
+ u8 evre_ring_shift;
+
+ evre_ring_shift = lldev->evre_ring_handle % EVRE_SIZE;
+ evre_ring_shift = EVRE_SIZE - evre_ring_shift;
+ lldev->evre_ring_handle += evre_ring_shift;
+ lldev->evre_ring += evre_ring_shift;
+ }
+ lldev->nr_tres = nr_tres;
+ lldev->chidx = chidx;
+
+ rc = kfifo_alloc(&lldev->handoff_fifo,
+ nr_tres * sizeof(struct hidma_tre *), GFP_KERNEL);
+ if (rc)
+ return NULL;
+
+ rc = hidma_ll_setup(lldev);
+ if (rc)
+ return NULL;
+
+ spin_lock_init(&lldev->lock);
+ tasklet_init(&lldev->task, hidma_ll_tre_complete, (unsigned long)lldev);
+ lldev->initialized = 1;
+ hidma_ll_enable_irq(lldev, ENABLE_IRQS);
+ return lldev;
+}
+
+int hidma_ll_uninit(struct hidma_lldev *lldev)
+{
+ int rc = 0;
+ u32 val;
+
+ if (!lldev)
+ return -ENODEV;
+
+ if (lldev->initialized) {
+ u32 required_bytes;
+
+ lldev->initialized = 0;
+
+ required_bytes = sizeof(struct hidma_tre) * lldev->nr_tres;
+ tasklet_kill(&lldev->task);
+ memset(lldev->trepool, 0, required_bytes);
+ lldev->trepool = NULL;
+ lldev->pending_tre_count = 0;
+ lldev->tre_write_offset = 0;
+
+ rc = hidma_ll_reset(lldev);
+
+ /*
+ * Clear all pending interrupts again.
+ * Otherwise, we observe reset complete interrupts.
+ */
+ val = readl(lldev->evca + EVCA_IRQ_STAT_OFFSET);
+ writel(val, lldev->evca + EVCA_IRQ_CLR_OFFSET);
+ hidma_ll_enable_irq(lldev, 0);
+ }
+ return rc;
+}
+
+irqreturn_t hidma_ll_inthandler(int chirq, void *arg)
+{
+ struct hidma_lldev *lldev = arg;
+
+ hidma_ll_int_handler_internal(lldev);
+ return IRQ_HANDLED;
+}
+
+enum dma_status hidma_ll_status(struct hidma_lldev *lldev, u32 tre_ch)
+{
+ enum dma_status ret = DMA_ERROR;
+ unsigned long flags;
+ u8 err_code;
+
+ spin_lock_irqsave(&lldev->lock, flags);
+ err_code = lldev->tx_status_list[tre_ch].err_code;
+
+ if (err_code & EVRE_STATUS_COMPLETE)
+ ret = DMA_COMPLETE;
+ else if (err_code & EVRE_STATUS_ERROR)
+ ret = DMA_ERROR;
+ else
+ ret = DMA_IN_PROGRESS;
+ spin_unlock_irqrestore(&lldev->lock, flags);
+
+ return ret;
+}
--
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH V10 5/7] dma: qcom_hidma: implement lower level hardware interface
@ 2015-12-17 17:01 ` Sinan Kaya
0 siblings, 0 replies; 35+ messages in thread
From: Sinan Kaya @ 2015-12-17 17:01 UTC (permalink / raw)
To: linux-arm-kernel
This patch implements the hardware hooks for the HIDMA channel driver.
The main functions of interest are:
- hidma_ll_init
- hidma_ll_request
- hidma_ll_queue_request
- hidma_ll_hw_start
OS layer calls the hidma_ll_init function during probe to set up the
hardware. At this moment, the number of supported descriptors are also
given. On each request, a descriptor is allocated from the free pool and
filled in with the transfer parameters. Multiple requests can be queued
into the hardware via the OS interface. When client is ready for requests
to be executed, start method is called.
Completions are delivered via callbacks via tasklet.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
drivers/dma/qcom/Makefile | 2 +
drivers/dma/qcom/hidma.h | 2 +-
drivers/dma/qcom/hidma_ll.c | 927 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 930 insertions(+), 1 deletion(-)
create mode 100644 drivers/dma/qcom/hidma_ll.c
diff --git a/drivers/dma/qcom/Makefile b/drivers/dma/qcom/Makefile
index bfea699..6bf9267 100644
--- a/drivers/dma/qcom/Makefile
+++ b/drivers/dma/qcom/Makefile
@@ -1,3 +1,5 @@
obj-$(CONFIG_QCOM_BAM_DMA) += bam_dma.o
obj-$(CONFIG_QCOM_HIDMA_MGMT) += hdma_mgmt.o
hdma_mgmt-objs := hidma_mgmt.o hidma_mgmt_sys.o
+obj-$(CONFIG_QCOM_HIDMA) += hdma.o
+hdma-objs := hidma_ll.o hidma.o
diff --git a/drivers/dma/qcom/hidma.h b/drivers/dma/qcom/hidma.h
index 231e306..1e09d7c 100644
--- a/drivers/dma/qcom/hidma.h
+++ b/drivers/dma/qcom/hidma.h
@@ -37,7 +37,7 @@ struct hidma_tre {
atomic_t allocated; /* if this channel is allocated */
bool queued; /* flag whether this is pending */
u16 status; /* status */
- u32 chidx; /* index of the tre */
+ u32 idx; /* index of the tre */
u32 dma_sig; /* signature of the tre */
const char *dev_name; /* name of the device */
void (*callback)(void *data); /* requester callback */
diff --git a/drivers/dma/qcom/hidma_ll.c b/drivers/dma/qcom/hidma_ll.c
new file mode 100644
index 0000000..0cd8d70
--- /dev/null
+++ b/drivers/dma/qcom/hidma_ll.c
@@ -0,0 +1,927 @@
+/*
+ * Qualcomm Technologies HIDMA DMA engine low level code
+ *
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/dmaengine.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/mm.h>
+#include <linux/highmem.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/atomic.h>
+#include <linux/iopoll.h>
+#include <linux/kfifo.h>
+#include <linux/bitops.h>
+
+#include "hidma.h"
+
+#define EVRE_SIZE 16 /* each EVRE is 16 bytes */
+
+#define TRCA_CTRLSTS_OFFSET 0x0
+#define TRCA_RING_LOW_OFFSET 0x8
+#define TRCA_RING_HIGH_OFFSET 0xC
+#define TRCA_RING_LEN_OFFSET 0x10
+#define TRCA_READ_PTR_OFFSET 0x18
+#define TRCA_WRITE_PTR_OFFSET 0x20
+#define TRCA_DOORBELL_OFFSET 0x400
+
+#define EVCA_CTRLSTS_OFFSET 0x0
+#define EVCA_INTCTRL_OFFSET 0x4
+#define EVCA_RING_LOW_OFFSET 0x8
+#define EVCA_RING_HIGH_OFFSET 0xC
+#define EVCA_RING_LEN_OFFSET 0x10
+#define EVCA_READ_PTR_OFFSET 0x18
+#define EVCA_WRITE_PTR_OFFSET 0x20
+#define EVCA_DOORBELL_OFFSET 0x400
+
+#define EVCA_IRQ_STAT_OFFSET 0x100
+#define EVCA_IRQ_CLR_OFFSET 0x108
+#define EVCA_IRQ_EN_OFFSET 0x110
+
+#define EVRE_CFG_IDX 0
+#define EVRE_LEN_IDX 1
+#define EVRE_DEST_LOW_IDX 2
+#define EVRE_DEST_HI_IDX 3
+
+#define EVRE_ERRINFO_BIT_POS 24
+#define EVRE_CODE_BIT_POS 28
+
+#define EVRE_ERRINFO_MASK GENMASK(3, 0)
+#define EVRE_CODE_MASK GENMASK(3, 0)
+
+#define CH_CONTROL_MASK GENMASK(7, 0)
+#define CH_STATE_MASK GENMASK(7, 0)
+#define CH_STATE_BIT_POS 0x8
+
+#define IRQ_EV_CH_EOB_IRQ_BIT_POS 0
+#define IRQ_EV_CH_WR_RESP_BIT_POS 1
+#define IRQ_TR_CH_TRE_RD_RSP_ER_BIT_POS 9
+#define IRQ_TR_CH_DATA_RD_ER_BIT_POS 10
+#define IRQ_TR_CH_DATA_WR_ER_BIT_POS 11
+#define IRQ_TR_CH_INVALID_TRE_BIT_POS 14
+
+#define ENABLE_IRQS (BIT(IRQ_EV_CH_EOB_IRQ_BIT_POS) | \
+ BIT(IRQ_EV_CH_WR_RESP_BIT_POS) | \
+ BIT(IRQ_TR_CH_TRE_RD_RSP_ER_BIT_POS) | \
+ BIT(IRQ_TR_CH_DATA_RD_ER_BIT_POS) | \
+ BIT(IRQ_TR_CH_DATA_WR_ER_BIT_POS) | \
+ BIT(IRQ_TR_CH_INVALID_TRE_BIT_POS))
+
+enum ch_command {
+ CH_DISABLE = 0,
+ CH_ENABLE = 1,
+ CH_SUSPEND = 2,
+ CH_RESET = 9,
+};
+
+enum ch_state {
+ CH_DISABLED = 0,
+ CH_ENABLED = 1,
+ CH_RUNNING = 2,
+ CH_SUSPENDED = 3,
+ CH_STOPPED = 4,
+ CH_ERROR = 5,
+ CH_IN_RESET = 9,
+};
+
+enum tre_type {
+ TRE_MEMCPY = 3,
+ TRE_MEMSET = 4,
+};
+
+enum evre_type {
+ EVRE_DMA_COMPLETE = 0x23,
+ EVRE_IMM_DATA = 0x24,
+};
+
+enum err_code {
+ EVRE_STATUS_COMPLETE = 1,
+ EVRE_STATUS_ERROR = 4,
+};
+
+void hidma_ll_free(struct hidma_lldev *lldev, u32 tre_ch)
+{
+ struct hidma_tre *tre;
+
+ if (tre_ch >= lldev->nr_tres) {
+ dev_err(lldev->dev, "invalid TRE number in free:%d", tre_ch);
+ return;
+ }
+
+ tre = &lldev->trepool[tre_ch];
+ if (atomic_read(&tre->allocated) != true) {
+ dev_err(lldev->dev, "trying to free an unused TRE:%d", tre_ch);
+ return;
+ }
+
+ atomic_set(&tre->allocated, 0);
+}
+
+int hidma_ll_request(struct hidma_lldev *lldev, u32 dma_sig,
+ const char *dev_name,
+ void (*callback)(void *data), void *data, u32 *tre_ch)
+{
+ unsigned int i;
+ struct hidma_tre *tre;
+ u32 *tre_local;
+
+ if (!tre_ch || !lldev)
+ return -EINVAL;
+
+ /* need to have at least one empty spot in the queue */
+ for (i = 0; i < lldev->nr_tres - 1; i++) {
+ if (atomic_add_unless(&lldev->trepool[i].allocated, 1, 1))
+ break;
+ }
+
+ if (i == (lldev->nr_tres - 1))
+ return -ENOMEM;
+
+ tre = &lldev->trepool[i];
+ tre->dma_sig = dma_sig;
+ tre->dev_name = dev_name;
+ tre->callback = callback;
+ tre->data = data;
+ tre->idx = i;
+ tre->status = 0;
+ tre->queued = 0;
+ lldev->tx_status_list[i].err_code = 0;
+ tre->lldev = lldev;
+ tre_local = &tre->tre_local[0];
+ tre_local[TRE_CFG_IDX] = TRE_MEMCPY;
+ tre_local[TRE_CFG_IDX] |= (lldev->chidx & 0xFF) << 8;
+ tre_local[TRE_CFG_IDX] |= BIT(16); /* set IEOB */
+ *tre_ch = i;
+ if (callback)
+ callback(data);
+ return 0;
+}
+
+/*
+ * Multiple TREs may be queued and waiting in the
+ * pending queue.
+ */
+static void hidma_ll_tre_complete(unsigned long arg)
+{
+ struct hidma_lldev *lldev = (struct hidma_lldev *)arg;
+ struct hidma_tre *tre;
+
+ while (kfifo_out(&lldev->handoff_fifo, &tre, 1)) {
+ /* call the user if it has been read by the hardware */
+ if (tre->callback)
+ tre->callback(tre->data);
+ }
+}
+
+/*
+ * Called to handle the interrupt for the channel.
+ * Return a positive number if TRE or EVRE were consumed on this run.
+ * Return a positive number if there are pending TREs or EVREs.
+ * Return 0 if there is nothing to consume or no pending TREs/EVREs found.
+ */
+static int hidma_handle_tre_completion(struct hidma_lldev *lldev)
+{
+ struct hidma_tre *tre;
+ u32 evre_write_off;
+ u32 evre_ring_size = lldev->evre_ring_size;
+ u32 tre_ring_size = lldev->tre_ring_size;
+ u32 num_completed = 0, tre_iterator, evre_iterator;
+ unsigned long flags;
+
+ evre_write_off = readl_relaxed(lldev->evca + EVCA_WRITE_PTR_OFFSET);
+ tre_iterator = lldev->tre_processed_off;
+ evre_iterator = lldev->evre_processed_off;
+
+ if ((evre_write_off > evre_ring_size) ||
+ ((evre_write_off % EVRE_SIZE) != 0)) {
+ dev_err(lldev->dev, "HW reports invalid EVRE write offset\n");
+ return 0;
+ }
+
+ /*
+ * By the time control reaches here the number of EVREs and TREs
+ * may not match. Only consume the ones that hardware told us.
+ */
+ while ((evre_iterator != evre_write_off)) {
+ u32 *current_evre = lldev->evre_ring + evre_iterator;
+ u32 cfg;
+ u8 err_info;
+
+ spin_lock_irqsave(&lldev->lock, flags);
+ tre = lldev->pending_tre_list[tre_iterator / TRE_SIZE];
+ if (!tre) {
+ spin_unlock_irqrestore(&lldev->lock, flags);
+ dev_warn(lldev->dev,
+ "tre_index [%d] and tre out of sync\n",
+ tre_iterator / TRE_SIZE);
+ tre_iterator += TRE_SIZE;
+ if (tre_iterator >= tre_ring_size)
+ tre_iterator -= tre_ring_size;
+ evre_iterator += EVRE_SIZE;
+ if (evre_iterator >= evre_ring_size)
+ evre_iterator -= evre_ring_size;
+
+ continue;
+ }
+ lldev->pending_tre_list[tre->tre_index] = NULL;
+
+ /*
+ * Keep track of pending TREs that SW is expecting to receive
+ * from HW. We got one now. Decrement our counter.
+ */
+ lldev->pending_tre_count--;
+ if (lldev->pending_tre_count < 0) {
+ dev_warn(lldev->dev,
+ "tre count mismatch on completion");
+ lldev->pending_tre_count = 0;
+ }
+
+ spin_unlock_irqrestore(&lldev->lock, flags);
+
+ cfg = current_evre[EVRE_CFG_IDX];
+ err_info = cfg >> EVRE_ERRINFO_BIT_POS;
+ err_info &= EVRE_ERRINFO_MASK;
+ lldev->tx_status_list[tre->idx].err_info = err_info;
+ lldev->tx_status_list[tre->idx].err_code =
+ (cfg >> EVRE_CODE_BIT_POS) & EVRE_CODE_MASK;
+ tre->queued = 0;
+
+ kfifo_put(&lldev->handoff_fifo, tre);
+ tasklet_schedule(&lldev->task);
+
+ tre_iterator += TRE_SIZE;
+ if (tre_iterator >= tre_ring_size)
+ tre_iterator -= tre_ring_size;
+ evre_iterator += EVRE_SIZE;
+ if (evre_iterator >= evre_ring_size)
+ evre_iterator -= evre_ring_size;
+
+ /*
+ * Read the new event descriptor written by the HW.
+ * As we are processing the delivered events, other events
+ * get queued to the SW for processing.
+ */
+ evre_write_off =
+ readl_relaxed(lldev->evca + EVCA_WRITE_PTR_OFFSET);
+ num_completed++;
+ }
+
+ if (num_completed) {
+ u32 evre_read_off = (lldev->evre_processed_off +
+ EVRE_SIZE * num_completed);
+ u32 tre_read_off = (lldev->tre_processed_off +
+ TRE_SIZE * num_completed);
+
+ evre_read_off = evre_read_off % evre_ring_size;
+ tre_read_off = tre_read_off % tre_ring_size;
+
+ writel(evre_read_off, lldev->evca + EVCA_DOORBELL_OFFSET);
+
+ /* record the last processed tre offset */
+ lldev->tre_processed_off = tre_read_off;
+ lldev->evre_processed_off = evre_read_off;
+ }
+
+ return num_completed;
+}
+
+void hidma_cleanup_pending_tre(struct hidma_lldev *lldev, u8 err_info,
+ u8 err_code)
+{
+ u32 tre_iterator;
+ struct hidma_tre *tre;
+ u32 tre_ring_size = lldev->tre_ring_size;
+ int num_completed = 0;
+ u32 tre_read_off;
+ unsigned long flags;
+
+ tre_iterator = lldev->tre_processed_off;
+ while (lldev->pending_tre_count) {
+ int tre_index = tre_iterator / TRE_SIZE;
+
+ spin_lock_irqsave(&lldev->lock, flags);
+ tre = lldev->pending_tre_list[tre_index];
+ if (!tre) {
+ spin_unlock_irqrestore(&lldev->lock, flags);
+ tre_iterator += TRE_SIZE;
+ if (tre_iterator >= tre_ring_size)
+ tre_iterator -= tre_ring_size;
+ continue;
+ }
+ lldev->pending_tre_list[tre_index] = NULL;
+ lldev->pending_tre_count--;
+ if (lldev->pending_tre_count < 0) {
+ dev_warn(lldev->dev,
+ "tre count mismatch on completion");
+ lldev->pending_tre_count = 0;
+ }
+ spin_unlock_irqrestore(&lldev->lock, flags);
+
+ lldev->tx_status_list[tre->idx].err_info = err_info;
+ lldev->tx_status_list[tre->idx].err_code = err_code;
+ tre->queued = 0;
+
+ kfifo_put(&lldev->handoff_fifo, tre);
+ tasklet_schedule(&lldev->task);
+
+ tre_iterator += TRE_SIZE;
+ if (tre_iterator >= tre_ring_size)
+ tre_iterator -= tre_ring_size;
+
+ num_completed++;
+ }
+ tre_read_off = (lldev->tre_processed_off + TRE_SIZE * num_completed);
+
+ tre_read_off = tre_read_off % tre_ring_size;
+
+ /* record the last processed tre offset */
+ lldev->tre_processed_off = tre_read_off;
+}
+
+static int hidma_ll_reset(struct hidma_lldev *lldev)
+{
+ u32 val;
+ int ret;
+
+ val = readl(lldev->trca + TRCA_CTRLSTS_OFFSET);
+ val &= ~(CH_CONTROL_MASK << 16);
+ val |= CH_RESET << 16;
+ writel(val, lldev->trca + TRCA_CTRLSTS_OFFSET);
+
+ /*
+ * Delay 10ms after reset to allow DMA logic to quiesce.
+ * Do a polled read up to 1ms and 10ms maximum.
+ */
+ ret = readl_poll_timeout(lldev->trca + TRCA_CTRLSTS_OFFSET, val,
+ (((val >> CH_STATE_BIT_POS) & CH_STATE_MASK) ==
+ CH_DISABLED), 1000, 10000);
+ if (ret) {
+ dev_err(lldev->dev, "transfer channel did not reset\n");
+ return ret;
+ }
+
+ val = readl(lldev->evca + EVCA_CTRLSTS_OFFSET);
+ val &= ~(CH_CONTROL_MASK << 16);
+ val |= CH_RESET << 16;
+ writel(val, lldev->evca + EVCA_CTRLSTS_OFFSET);
+
+ /*
+ * Delay 10ms after reset to allow DMA logic to quiesce.
+ * Do a polled read up to 1ms and 10ms maximum.
+ */
+ ret = readl_poll_timeout(lldev->evca + EVCA_CTRLSTS_OFFSET, val,
+ (((val >> CH_STATE_BIT_POS) & CH_STATE_MASK) ==
+ CH_DISABLED), 1000, 10000);
+ if (ret)
+ return ret;
+
+ lldev->trch_state = CH_DISABLED;
+ lldev->evch_state = CH_DISABLED;
+ return 0;
+}
+
+static void hidma_ll_enable_irq(struct hidma_lldev *lldev, u32 irq_bits)
+{
+ writel(irq_bits, lldev->evca + EVCA_IRQ_EN_OFFSET);
+}
+
+/*
+ * The interrupt handler for HIDMA will try to consume as many pending
+ * EVRE from the event queue as possible. Each EVRE has an associated
+ * TRE that holds the user interface parameters. EVRE reports the
+ * result of the transaction. Hardware guarantees ordering between EVREs
+ * and TREs. We use last processed offset to figure out which TRE is
+ * associated with which EVRE. If two TREs are consumed by HW, the EVREs
+ * are in order in the event ring.
+ *
+ * This handler will do a one pass for consuming EVREs. Other EVREs may
+ * be delivered while we are working. It will try to consume incoming
+ * EVREs one more time and return.
+ *
+ * For unprocessed EVREs, hardware will trigger another interrupt until
+ * all the interrupt bits are cleared.
+ *
+ * Hardware guarantees that by the time interrupt is observed, all data
+ * transactions in flight are delivered to their respective places and
+ * are visible to the CPU.
+ *
+ * On demand paging for IOMMU is only supported for PCIe via PRI
+ * (Page Request Interface) not for HIDMA. All other hardware instances
+ * including HIDMA work on pinned DMA addresses.
+ *
+ * HIDMA is not aware of IOMMU presence since it follows the DMA API. All
+ * IOMMU latency will be built into the data movement time. By the time
+ * interrupt happens, IOMMU lookups + data movement has already taken place.
+ *
+ * While the first read in a typical PCI endpoint ISR flushes all outstanding
+ * requests traditionally to the destination, this concept does not apply
+ * here for this HW.
+ */
+static void hidma_ll_int_handler_internal(struct hidma_lldev *lldev)
+{
+ u32 status;
+ u32 enable;
+ u32 cause;
+ int repeat = 2;
+ unsigned long timeout;
+
+ /*
+ * Fine tuned for this HW...
+ *
+ * This ISR has been designed for this particular hardware. Relaxed
+ * read and write accessors are used for performance reasons due to
+ * interrupt delivery guarantees. Do not copy this code blindly and
+ * expect that to work.
+ */
+ status = readl_relaxed(lldev->evca + EVCA_IRQ_STAT_OFFSET);
+ enable = readl_relaxed(lldev->evca + EVCA_IRQ_EN_OFFSET);
+ cause = status & enable;
+
+ if ((cause & (BIT(IRQ_TR_CH_INVALID_TRE_BIT_POS))) ||
+ (cause & BIT(IRQ_TR_CH_TRE_RD_RSP_ER_BIT_POS)) ||
+ (cause & BIT(IRQ_EV_CH_WR_RESP_BIT_POS)) ||
+ (cause & BIT(IRQ_TR_CH_DATA_RD_ER_BIT_POS)) ||
+ (cause & BIT(IRQ_TR_CH_DATA_WR_ER_BIT_POS))) {
+ u8 err_code = EVRE_STATUS_ERROR;
+ u8 err_info = 0xFF;
+
+ /* Clear out pending interrupts */
+ writel(cause, lldev->evca + EVCA_IRQ_CLR_OFFSET);
+
+ dev_err(lldev->dev, "error 0x%x, resetting...\n", cause);
+
+ hidma_cleanup_pending_tre(lldev, err_info, err_code);
+
+ /* reset the channel for recovery */
+ if (hidma_ll_setup(lldev)) {
+ dev_err(lldev->dev,
+ "channel reinitialize failed after error\n");
+ return;
+ }
+ hidma_ll_enable_irq(lldev, ENABLE_IRQS);
+ return;
+ }
+
+ /*
+ * Try to consume as many EVREs as possible.
+ * skip this loop if the interrupt is spurious.
+ */
+ while (cause && repeat) {
+ unsigned long start = jiffies;
+
+ /* This timeout should be sufficent for core to finish */
+ timeout = start + msecs_to_jiffies(500);
+
+ while (lldev->pending_tre_count) {
+ hidma_handle_tre_completion(lldev);
+ if (time_is_before_jiffies(timeout)) {
+ dev_warn(lldev->dev,
+ "ISR timeout %lx-%lx from %lx [%d]\n",
+ jiffies, timeout, start,
+ lldev->pending_tre_count);
+ break;
+ }
+ }
+
+ /* We consumed TREs or there are pending TREs or EVREs. */
+ writel_relaxed(cause, lldev->evca + EVCA_IRQ_CLR_OFFSET);
+
+ /*
+ * Another interrupt might have arrived while we are
+ * processing this one. Read the new cause.
+ */
+ status = readl_relaxed(lldev->evca + EVCA_IRQ_STAT_OFFSET);
+ enable = readl_relaxed(lldev->evca + EVCA_IRQ_EN_OFFSET);
+ cause = status & enable;
+
+ repeat--;
+ }
+}
+
+static int hidma_ll_enable(struct hidma_lldev *lldev)
+{
+ u32 val;
+ int ret;
+
+ val = readl(lldev->evca + EVCA_CTRLSTS_OFFSET);
+ val &= ~(CH_CONTROL_MASK << 16);
+ val |= CH_ENABLE << 16;
+ writel(val, lldev->evca + EVCA_CTRLSTS_OFFSET);
+
+ ret = readl_poll_timeout(lldev->evca + EVCA_CTRLSTS_OFFSET, val,
+ ((((val >> CH_STATE_BIT_POS) & CH_STATE_MASK)
+ == CH_ENABLED)
+ ||
+ (((val >> CH_STATE_BIT_POS) & CH_STATE_MASK)
+ == CH_RUNNING)), 1000, 10000);
+ if (ret) {
+ dev_err(lldev->dev, "event channel did not get enabled\n");
+ return ret;
+ }
+
+ val = readl(lldev->trca + TRCA_CTRLSTS_OFFSET);
+ val &= ~(CH_CONTROL_MASK << 16);
+ val |= CH_ENABLE << 16;
+ writel(val, lldev->trca + TRCA_CTRLSTS_OFFSET);
+
+ ret = readl_poll_timeout(lldev->trca + TRCA_CTRLSTS_OFFSET, val,
+ ((((val >> CH_STATE_BIT_POS) & CH_STATE_MASK)
+ == CH_ENABLED)
+ ||
+ (((val >> CH_STATE_BIT_POS) & CH_STATE_MASK)
+ == CH_RUNNING)), 1000, 10000);
+ if (ret) {
+ dev_err(lldev->dev, "transfer channel did not get enabled\n");
+ return ret;
+ }
+
+ lldev->trch_state = CH_ENABLED;
+ lldev->evch_state = CH_ENABLED;
+
+ return 0;
+}
+
+int hidma_ll_resume(struct hidma_lldev *lldev)
+{
+ return hidma_ll_enable(lldev);
+}
+
+static void hidma_ll_hw_start(struct hidma_lldev *lldev)
+{
+ unsigned long irqflags;
+
+ spin_lock_irqsave(&lldev->lock, irqflags);
+ writel(lldev->tre_write_offset, lldev->trca + TRCA_DOORBELL_OFFSET);
+ spin_unlock_irqrestore(&lldev->lock, irqflags);
+}
+
+bool hidma_ll_isenabled(struct hidma_lldev *lldev)
+{
+ u32 val;
+
+ val = readl(lldev->trca + TRCA_CTRLSTS_OFFSET);
+ lldev->trch_state = (val >> CH_STATE_BIT_POS) & CH_STATE_MASK;
+ val = readl(lldev->evca + EVCA_CTRLSTS_OFFSET);
+ lldev->evch_state = (val >> CH_STATE_BIT_POS) & CH_STATE_MASK;
+
+ /* both channels have to be enabled before calling this function */
+ if (((lldev->trch_state == CH_ENABLED) ||
+ (lldev->trch_state == CH_RUNNING)) &&
+ ((lldev->evch_state == CH_ENABLED) ||
+ (lldev->evch_state == CH_RUNNING)))
+ return true;
+
+ return false;
+}
+
+void hidma_ll_queue_request(struct hidma_lldev *lldev, u32 tre_ch)
+{
+ struct hidma_tre *tre;
+ unsigned long flags;
+
+ tre = &lldev->trepool[tre_ch];
+
+ /* copy the TRE into its location in the TRE ring */
+ spin_lock_irqsave(&lldev->lock, flags);
+ tre->tre_index = lldev->tre_write_offset / TRE_SIZE;
+ lldev->pending_tre_list[tre->tre_index] = tre;
+ memcpy(lldev->tre_ring + lldev->tre_write_offset, &tre->tre_local[0],
+ TRE_SIZE);
+ lldev->tx_status_list[tre->idx].err_code = 0;
+ lldev->tx_status_list[tre->idx].err_info = 0;
+ tre->queued = 1;
+ lldev->pending_tre_count++;
+ lldev->tre_write_offset = (lldev->tre_write_offset + TRE_SIZE)
+ % lldev->tre_ring_size;
+ spin_unlock_irqrestore(&lldev->lock, flags);
+}
+
+void hidma_ll_start(struct hidma_lldev *lldev)
+{
+ hidma_ll_hw_start(lldev);
+}
+
+/*
+ * Note that even though we stop this channel
+ * if there is a pending transaction in flight
+ * it will complete and follow the callback.
+ * This request will prevent further requests
+ * to be made.
+ */
+int hidma_ll_pause(struct hidma_lldev *lldev)
+{
+ u32 val;
+ int ret;
+
+ val = readl(lldev->evca + EVCA_CTRLSTS_OFFSET);
+ lldev->evch_state = (val >> CH_STATE_BIT_POS) & CH_STATE_MASK;
+ val = readl(lldev->trca + TRCA_CTRLSTS_OFFSET);
+ lldev->trch_state = (val >> CH_STATE_BIT_POS) & CH_STATE_MASK;
+
+ /* already suspended by this OS */
+ if ((lldev->trch_state == CH_SUSPENDED) ||
+ (lldev->evch_state == CH_SUSPENDED))
+ return 0;
+
+ /* already stopped by the manager */
+ if ((lldev->trch_state == CH_STOPPED) ||
+ (lldev->evch_state == CH_STOPPED))
+ return 0;
+
+ val = readl(lldev->trca + TRCA_CTRLSTS_OFFSET);
+ val &= ~(CH_CONTROL_MASK << 16);
+ val |= CH_SUSPEND << 16;
+ writel(val, lldev->trca + TRCA_CTRLSTS_OFFSET);
+
+ /*
+ * Start the wait right after the suspend is confirmed.
+ * Do a polled read up to 1ms and 10ms maximum.
+ */
+ ret = readl_poll_timeout(lldev->trca + TRCA_CTRLSTS_OFFSET, val,
+ (((val >> CH_STATE_BIT_POS) & CH_STATE_MASK) ==
+ CH_SUSPENDED), 1000, 10000);
+ if (ret)
+ return ret;
+
+ val = readl(lldev->evca + EVCA_CTRLSTS_OFFSET);
+ val &= ~(CH_CONTROL_MASK << 16);
+ val |= CH_SUSPEND << 16;
+ writel(val, lldev->evca + EVCA_CTRLSTS_OFFSET);
+
+ /*
+ * Start the wait right after the suspend is confirmed
+ * Delay up to 10ms after reset to allow DMA logic to quiesce.
+ */
+ ret = readl_poll_timeout(lldev->evca + EVCA_CTRLSTS_OFFSET, val,
+ (((val >> CH_STATE_BIT_POS) & CH_STATE_MASK) ==
+ CH_SUSPENDED), 1000, 10000);
+ if (ret)
+ return ret;
+
+ lldev->trch_state = CH_SUSPENDED;
+ lldev->evch_state = CH_SUSPENDED;
+ return 0;
+}
+
+void hidma_ll_set_transfer_params(struct hidma_lldev *lldev, u32 tre_ch,
+ dma_addr_t src, dma_addr_t dest, u32 len,
+ u32 flags)
+{
+ struct hidma_tre *tre;
+ u32 *tre_local;
+
+ if (tre_ch >= lldev->nr_tres) {
+ dev_err(lldev->dev,
+ "invalid TRE number in transfer params:%d", tre_ch);
+ return;
+ }
+
+ tre = &lldev->trepool[tre_ch];
+ if (atomic_read(&tre->allocated) != true) {
+ dev_err(lldev->dev,
+ "trying to set params on an unused TRE:%d", tre_ch);
+ return;
+ }
+
+ tre_local = &tre->tre_local[0];
+ tre_local[TRE_LEN_IDX] = len;
+ tre_local[TRE_SRC_LOW_IDX] = lower_32_bits(src);
+ tre_local[TRE_SRC_HI_IDX] = upper_32_bits(src);
+ tre_local[TRE_DEST_LOW_IDX] = lower_32_bits(dest);
+ tre_local[TRE_DEST_HI_IDX] = upper_32_bits(dest);
+ tre->int_flags = flags;
+}
+
+/*
+ * Called during initialization and after an error condition
+ * to restore hardware state.
+ */
+int hidma_ll_setup(struct hidma_lldev *lldev)
+{
+ int rc;
+ u64 addr;
+ u32 val;
+ u32 nr_tres = lldev->nr_tres;
+
+ lldev->pending_tre_count = 0;
+ lldev->tre_processed_off = 0;
+ lldev->evre_processed_off = 0;
+ lldev->tre_write_offset = 0;
+
+ /* disable interrupts */
+ hidma_ll_enable_irq(lldev, 0);
+
+ /* clear all pending interrupts */
+ val = readl(lldev->evca + EVCA_IRQ_STAT_OFFSET);
+ writel(val, lldev->evca + EVCA_IRQ_CLR_OFFSET);
+
+ rc = hidma_ll_reset(lldev);
+ if (rc)
+ return rc;
+
+ /*
+ * Clear all pending interrupts again.
+ * Otherwise, we observe reset complete interrupts.
+ */
+ val = readl(lldev->evca + EVCA_IRQ_STAT_OFFSET);
+ writel(val, lldev->evca + EVCA_IRQ_CLR_OFFSET);
+
+ /* disable interrupts again after reset */
+ hidma_ll_enable_irq(lldev, 0);
+
+ addr = lldev->tre_ring_handle;
+ writel(lower_32_bits(addr), lldev->trca + TRCA_RING_LOW_OFFSET);
+ writel(upper_32_bits(addr), lldev->trca + TRCA_RING_HIGH_OFFSET);
+ writel(lldev->tre_ring_size, lldev->trca + TRCA_RING_LEN_OFFSET);
+
+ addr = lldev->evre_ring_handle;
+ writel(lower_32_bits(addr), lldev->evca + EVCA_RING_LOW_OFFSET);
+ writel(upper_32_bits(addr), lldev->evca + EVCA_RING_HIGH_OFFSET);
+ writel(EVRE_SIZE * nr_tres, lldev->evca + EVCA_RING_LEN_OFFSET);
+
+ /* support IRQ only for now */
+ val = readl(lldev->evca + EVCA_INTCTRL_OFFSET);
+ val &= ~0xF;
+ val |= 0x1;
+ writel(val, lldev->evca + EVCA_INTCTRL_OFFSET);
+
+ /* clear all pending interrupts and enable them */
+ writel(ENABLE_IRQS, lldev->evca + EVCA_IRQ_CLR_OFFSET);
+ hidma_ll_enable_irq(lldev, ENABLE_IRQS);
+
+ rc = hidma_ll_enable(lldev);
+ if (rc)
+ return rc;
+
+ return rc;
+}
+
+struct hidma_lldev *hidma_ll_init(struct device *dev, u32 nr_tres,
+ void __iomem *trca, void __iomem *evca,
+ u8 chidx)
+{
+ u32 required_bytes;
+ struct hidma_lldev *lldev;
+ int rc;
+
+ if (!trca || !evca || !dev || !nr_tres)
+ return NULL;
+
+ /* need at least four TREs */
+ if (nr_tres < 4)
+ return NULL;
+
+ /* need an extra space */
+ nr_tres += 1;
+
+ lldev = devm_kzalloc(dev, sizeof(struct hidma_lldev), GFP_KERNEL);
+ if (!lldev)
+ return NULL;
+
+ lldev->evca = evca;
+ lldev->trca = trca;
+ lldev->dev = dev;
+ required_bytes = sizeof(struct hidma_tre) * nr_tres;
+ lldev->trepool = devm_kzalloc(lldev->dev, required_bytes, GFP_KERNEL);
+ if (!lldev->trepool)
+ return NULL;
+
+ required_bytes = sizeof(lldev->pending_tre_list[0]) * nr_tres;
+ lldev->pending_tre_list = devm_kzalloc(dev, required_bytes, GFP_KERNEL);
+ if (!lldev->pending_tre_list)
+ return NULL;
+
+ required_bytes = sizeof(lldev->tx_status_list[0]) * nr_tres;
+ lldev->tx_status_list = devm_kzalloc(dev, required_bytes, GFP_KERNEL);
+ if (!lldev->tx_status_list)
+ return NULL;
+
+ lldev->tre_ring = dmam_alloc_coherent(dev, (TRE_SIZE + 1) * nr_tres,
+ &lldev->tre_ring_handle,
+ GFP_KERNEL);
+ if (!lldev->tre_ring)
+ return NULL;
+
+ memset(lldev->tre_ring, 0, (TRE_SIZE + 1) * nr_tres);
+ lldev->tre_ring_size = TRE_SIZE * nr_tres;
+ lldev->nr_tres = nr_tres;
+
+ /* the TRE ring has to be TRE_SIZE aligned */
+ if (!IS_ALIGNED(lldev->tre_ring_handle, TRE_SIZE)) {
+ u8 tre_ring_shift;
+
+ tre_ring_shift = lldev->tre_ring_handle % TRE_SIZE;
+ tre_ring_shift = TRE_SIZE - tre_ring_shift;
+ lldev->tre_ring_handle += tre_ring_shift;
+ lldev->tre_ring += tre_ring_shift;
+ }
+
+ lldev->evre_ring = dmam_alloc_coherent(dev, (EVRE_SIZE + 1) * nr_tres,
+ &lldev->evre_ring_handle,
+ GFP_KERNEL);
+ if (!lldev->evre_ring)
+ return NULL;
+
+ memset(lldev->evre_ring, 0, (EVRE_SIZE + 1) * nr_tres);
+ lldev->evre_ring_size = EVRE_SIZE * nr_tres;
+
+ /* the EVRE ring has to be EVRE_SIZE aligned */
+ if (!IS_ALIGNED(lldev->evre_ring_handle, EVRE_SIZE)) {
+ u8 evre_ring_shift;
+
+ evre_ring_shift = lldev->evre_ring_handle % EVRE_SIZE;
+ evre_ring_shift = EVRE_SIZE - evre_ring_shift;
+ lldev->evre_ring_handle += evre_ring_shift;
+ lldev->evre_ring += evre_ring_shift;
+ }
+ lldev->nr_tres = nr_tres;
+ lldev->chidx = chidx;
+
+ rc = kfifo_alloc(&lldev->handoff_fifo,
+ nr_tres * sizeof(struct hidma_tre *), GFP_KERNEL);
+ if (rc)
+ return NULL;
+
+ rc = hidma_ll_setup(lldev);
+ if (rc)
+ return NULL;
+
+ spin_lock_init(&lldev->lock);
+ tasklet_init(&lldev->task, hidma_ll_tre_complete, (unsigned long)lldev);
+ lldev->initialized = 1;
+ hidma_ll_enable_irq(lldev, ENABLE_IRQS);
+ return lldev;
+}
+
+int hidma_ll_uninit(struct hidma_lldev *lldev)
+{
+ int rc = 0;
+ u32 val;
+
+ if (!lldev)
+ return -ENODEV;
+
+ if (lldev->initialized) {
+ u32 required_bytes;
+
+ lldev->initialized = 0;
+
+ required_bytes = sizeof(struct hidma_tre) * lldev->nr_tres;
+ tasklet_kill(&lldev->task);
+ memset(lldev->trepool, 0, required_bytes);
+ lldev->trepool = NULL;
+ lldev->pending_tre_count = 0;
+ lldev->tre_write_offset = 0;
+
+ rc = hidma_ll_reset(lldev);
+
+ /*
+ * Clear all pending interrupts again.
+ * Otherwise, we observe reset complete interrupts.
+ */
+ val = readl(lldev->evca + EVCA_IRQ_STAT_OFFSET);
+ writel(val, lldev->evca + EVCA_IRQ_CLR_OFFSET);
+ hidma_ll_enable_irq(lldev, 0);
+ }
+ return rc;
+}
+
+irqreturn_t hidma_ll_inthandler(int chirq, void *arg)
+{
+ struct hidma_lldev *lldev = arg;
+
+ hidma_ll_int_handler_internal(lldev);
+ return IRQ_HANDLED;
+}
+
+enum dma_status hidma_ll_status(struct hidma_lldev *lldev, u32 tre_ch)
+{
+ enum dma_status ret = DMA_ERROR;
+ unsigned long flags;
+ u8 err_code;
+
+ spin_lock_irqsave(&lldev->lock, flags);
+ err_code = lldev->tx_status_list[tre_ch].err_code;
+
+ if (err_code & EVRE_STATUS_COMPLETE)
+ ret = DMA_COMPLETE;
+ else if (err_code & EVRE_STATUS_ERROR)
+ ret = DMA_ERROR;
+ else
+ ret = DMA_IN_PROGRESS;
+ spin_unlock_irqrestore(&lldev->lock, flags);
+
+ return ret;
+}
--
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [PATCH V10 6/7] dma: qcom_hidma: add debugfs hooks
2015-12-17 17:01 ` Sinan Kaya
@ 2015-12-17 17:01 ` Sinan Kaya
-1 siblings, 0 replies; 35+ messages in thread
From: Sinan Kaya @ 2015-12-17 17:01 UTC (permalink / raw)
To: dmaengine, mark.rutland, timur, devicetree, cov, vinod.koul, jcm
Cc: agross, arnd, linux-arm-msm, linux-arm-kernel, Sinan Kaya, linux-kernel
Add debugfs hooks for debugging the execution behavior of the DMA
channel. The debugfs hooks get initialized by the probe function and
uninitialized by the remove function.
A stats file is created in debugfs. The stats file will show the
information about each HIDMA channel as well as each asynchronous job
queued and completed at a given time.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
drivers/dma/qcom/Makefile | 2 +-
drivers/dma/qcom/hidma.c | 3 +
drivers/dma/qcom/hidma.h | 2 +
drivers/dma/qcom/hidma_dbg.c | 219 +++++++++++++++++++++++++++++++++++++++++++
4 files changed, 225 insertions(+), 1 deletion(-)
create mode 100644 drivers/dma/qcom/hidma_dbg.c
diff --git a/drivers/dma/qcom/Makefile b/drivers/dma/qcom/Makefile
index 6bf9267..4bfc38b 100644
--- a/drivers/dma/qcom/Makefile
+++ b/drivers/dma/qcom/Makefile
@@ -2,4 +2,4 @@ obj-$(CONFIG_QCOM_BAM_DMA) += bam_dma.o
obj-$(CONFIG_QCOM_HIDMA_MGMT) += hdma_mgmt.o
hdma_mgmt-objs := hidma_mgmt.o hidma_mgmt_sys.o
obj-$(CONFIG_QCOM_HIDMA) += hdma.o
-hdma-objs := hidma_ll.o hidma.o
+hdma-objs := hidma_ll.o hidma.o hidma_dbg.o
diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
index f8960f1..833db9e 100644
--- a/drivers/dma/qcom/hidma.c
+++ b/drivers/dma/qcom/hidma.c
@@ -681,6 +681,7 @@ static int hidma_probe(struct platform_device *pdev)
dmadev->irq = chirq;
tasklet_init(&dmadev->task, hidma_issue_task, (unsigned long)dmadev);
+ hidma_debug_init(dmadev);
dev_info(&pdev->dev, "HI-DMA engine driver registration complete\n");
platform_set_drvdata(pdev, dmadev);
pm_runtime_mark_last_busy(dmadev->ddev.dev);
@@ -689,6 +690,7 @@ static int hidma_probe(struct platform_device *pdev)
return 0;
uninit:
+ hidma_debug_uninit(dmadev);
hidma_ll_uninit(dmadev->lldev);
dmafree:
if (dmadev)
@@ -706,6 +708,7 @@ static int hidma_remove(struct platform_device *pdev)
pm_runtime_get_sync(dmadev->ddev.dev);
dma_async_device_unregister(&dmadev->ddev);
devm_free_irq(dmadev->ddev.dev, dmadev->irq, dmadev->lldev);
+ hidma_debug_uninit(dmadev);
hidma_ll_uninit(dmadev->lldev);
hidma_free(dmadev);
diff --git a/drivers/dma/qcom/hidma.h b/drivers/dma/qcom/hidma.h
index 1e09d7c..c6b3ae0 100644
--- a/drivers/dma/qcom/hidma.h
+++ b/drivers/dma/qcom/hidma.h
@@ -157,4 +157,6 @@ int hidma_ll_uninit(struct hidma_lldev *llhndl);
irqreturn_t hidma_ll_inthandler(int irq, void *arg);
void hidma_cleanup_pending_tre(struct hidma_lldev *llhndl, u8 err_info,
u8 err_code);
+int hidma_debug_init(struct hidma_dev *dmadev);
+void hidma_debug_uninit(struct hidma_dev *dmadev);
#endif
diff --git a/drivers/dma/qcom/hidma_dbg.c b/drivers/dma/qcom/hidma_dbg.c
new file mode 100644
index 0000000..fe35002
--- /dev/null
+++ b/drivers/dma/qcom/hidma_dbg.c
@@ -0,0 +1,219 @@
+/*
+ * Qualcomm Technologies HIDMA debug file
+ *
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/pm_runtime.h>
+
+#include "hidma.h"
+
+static void hidma_ll_chstats(struct seq_file *s, void *llhndl, u32 tre_ch)
+{
+ struct hidma_lldev *lldev = llhndl;
+ struct hidma_tre *tre;
+ u32 length;
+ dma_addr_t src_start;
+ dma_addr_t dest_start;
+ u32 *tre_local;
+
+ if (tre_ch >= lldev->nr_tres) {
+ dev_err(lldev->dev, "invalid TRE number in chstats:%d", tre_ch);
+ return;
+ }
+ tre = &lldev->trepool[tre_ch];
+ seq_printf(s, "------Channel %d -----\n", tre_ch);
+ seq_printf(s, "allocated=%d\n", atomic_read(&tre->allocated));
+ seq_printf(s, "queued = 0x%x\n", tre->queued);
+ seq_printf(s, "err_info = 0x%x\n",
+ lldev->tx_status_list[tre->idx].err_info);
+ seq_printf(s, "err_code = 0x%x\n",
+ lldev->tx_status_list[tre->idx].err_code);
+ seq_printf(s, "status = 0x%x\n", tre->status);
+ seq_printf(s, "idx = 0x%x\n", tre->idx);
+ seq_printf(s, "dma_sig = 0x%x\n", tre->dma_sig);
+ seq_printf(s, "dev_name=%s\n", tre->dev_name);
+ seq_printf(s, "callback=%p\n", tre->callback);
+ seq_printf(s, "data=%p\n", tre->data);
+ seq_printf(s, "tre_index = 0x%x\n", tre->tre_index);
+
+ tre_local = &tre->tre_local[0];
+ src_start = tre_local[TRE_SRC_LOW_IDX];
+ src_start = ((u64) (tre_local[TRE_SRC_HI_IDX]) << 32) + src_start;
+ dest_start = tre_local[TRE_DEST_LOW_IDX];
+ dest_start += ((u64) (tre_local[TRE_DEST_HI_IDX]) << 32);
+ length = tre_local[TRE_LEN_IDX];
+
+ seq_printf(s, "src=%pap\n", &src_start);
+ seq_printf(s, "dest=%pap\n", &dest_start);
+ seq_printf(s, "length = 0x%x\n", length);
+}
+
+static void hidma_ll_devstats(struct seq_file *s, void *llhndl)
+{
+ struct hidma_lldev *lldev = llhndl;
+
+ seq_puts(s, "------Device -----\n");
+ seq_printf(s, "lldev init = 0x%x\n", lldev->initialized);
+ seq_printf(s, "trch_state = 0x%x\n", lldev->trch_state);
+ seq_printf(s, "evch_state = 0x%x\n", lldev->evch_state);
+ seq_printf(s, "chidx = 0x%x\n", lldev->chidx);
+ seq_printf(s, "nr_tres = 0x%x\n", lldev->nr_tres);
+ seq_printf(s, "trca=%p\n", lldev->trca);
+ seq_printf(s, "tre_ring=%p\n", lldev->tre_ring);
+ seq_printf(s, "tre_ring_handle=%pap\n", &lldev->tre_ring_handle);
+ seq_printf(s, "tre_ring_size = 0x%x\n", lldev->tre_ring_size);
+ seq_printf(s, "tre_processed_off = 0x%x\n", lldev->tre_processed_off);
+ seq_printf(s, "pending_tre_count=%d\n", lldev->pending_tre_count);
+ seq_printf(s, "evca=%p\n", lldev->evca);
+ seq_printf(s, "evre_ring=%p\n", lldev->evre_ring);
+ seq_printf(s, "evre_ring_handle=%pap\n", &lldev->evre_ring_handle);
+ seq_printf(s, "evre_ring_size = 0x%x\n", lldev->evre_ring_size);
+ seq_printf(s, "evre_processed_off = 0x%x\n", lldev->evre_processed_off);
+ seq_printf(s, "tre_write_offset = 0x%x\n", lldev->tre_write_offset);
+}
+
+/*
+ * hidma_chan_stats: display HIDMA channel statistics
+ *
+ * Display the statistics for the current HIDMA virtual channel device.
+ */
+static int hidma_chan_stats(struct seq_file *s, void *unused)
+{
+ struct hidma_chan *mchan = s->private;
+ struct hidma_desc *mdesc;
+ struct hidma_dev *dmadev = mchan->dmadev;
+
+ pm_runtime_get_sync(dmadev->ddev.dev);
+ seq_printf(s, "paused=%u\n", mchan->paused);
+ seq_printf(s, "dma_sig=%u\n", mchan->dma_sig);
+ seq_puts(s, "prepared\n");
+ list_for_each_entry(mdesc, &mchan->prepared, node)
+ hidma_ll_chstats(s, mchan->dmadev->lldev, mdesc->tre_ch);
+
+ seq_puts(s, "active\n");
+ list_for_each_entry(mdesc, &mchan->active, node)
+ hidma_ll_chstats(s, mchan->dmadev->lldev, mdesc->tre_ch);
+
+ seq_puts(s, "completed\n");
+ list_for_each_entry(mdesc, &mchan->completed, node)
+ hidma_ll_chstats(s, mchan->dmadev->lldev, mdesc->tre_ch);
+
+ hidma_ll_devstats(s, mchan->dmadev->lldev);
+ pm_runtime_mark_last_busy(dmadev->ddev.dev);
+ pm_runtime_put_autosuspend(dmadev->ddev.dev);
+ return 0;
+}
+
+/*
+ * hidma_dma_info: display HIDMA device info
+ *
+ * Display the info for the current HIDMA device.
+ */
+static int hidma_dma_info(struct seq_file *s, void *unused)
+{
+ struct hidma_dev *dmadev = s->private;
+ resource_size_t sz;
+
+ seq_printf(s, "nr_descriptors=%d\n", dmadev->nr_descriptors);
+ seq_printf(s, "dev_trca=%p\n", &dmadev->dev_trca);
+ seq_printf(s, "dev_trca_phys=%pa\n", &dmadev->trca_resource->start);
+ sz = resource_size(dmadev->trca_resource);
+ seq_printf(s, "dev_trca_size=%pa\n", &sz);
+ seq_printf(s, "dev_evca=%p\n", &dmadev->dev_evca);
+ seq_printf(s, "dev_evca_phys=%pa\n", &dmadev->evca_resource->start);
+ sz = resource_size(dmadev->evca_resource);
+ seq_printf(s, "dev_evca_size=%pa\n", &sz);
+ return 0;
+}
+
+static int hidma_chan_stats_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, hidma_chan_stats, inode->i_private);
+}
+
+static int hidma_dma_info_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, hidma_dma_info, inode->i_private);
+}
+
+static const struct file_operations hidma_chan_fops = {
+ .open = hidma_chan_stats_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static const struct file_operations hidma_dma_fops = {
+ .open = hidma_dma_info_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+void hidma_debug_uninit(struct hidma_dev *dmadev)
+{
+ debugfs_remove_recursive(dmadev->debugfs);
+ debugfs_remove_recursive(dmadev->stats);
+}
+
+int hidma_debug_init(struct hidma_dev *dmadev)
+{
+ int rc = 0;
+ int chidx = 0;
+ struct list_head *position = NULL;
+
+ dmadev->debugfs = debugfs_create_dir(dev_name(dmadev->ddev.dev), NULL);
+ if (!dmadev->debugfs) {
+ rc = -ENODEV;
+ return rc;
+ }
+
+ /* walk through the virtual channel list */
+ list_for_each(position, &dmadev->ddev.channels) {
+ struct hidma_chan *chan;
+
+ chan = list_entry(position, struct hidma_chan,
+ chan.device_node);
+ sprintf(chan->dbg_name, "chan%d", chidx);
+ chan->debugfs = debugfs_create_dir(chan->dbg_name,
+ dmadev->debugfs);
+ if (!chan->debugfs) {
+ rc = -ENOMEM;
+ goto cleanup;
+ }
+ chan->stats = debugfs_create_file("stats", S_IRUGO,
+ chan->debugfs, chan,
+ &hidma_chan_fops);
+ if (!chan->stats) {
+ rc = -ENOMEM;
+ goto cleanup;
+ }
+ chidx++;
+ }
+
+ dmadev->stats = debugfs_create_file("stats", S_IRUGO,
+ dmadev->debugfs, dmadev,
+ &hidma_dma_fops);
+ if (!dmadev->stats) {
+ rc = -ENOMEM;
+ goto cleanup;
+ }
+
+ return 0;
+cleanup:
+ hidma_debug_uninit(dmadev);
+ return rc;
+}
--
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH V10 6/7] dma: qcom_hidma: add debugfs hooks
@ 2015-12-17 17:01 ` Sinan Kaya
0 siblings, 0 replies; 35+ messages in thread
From: Sinan Kaya @ 2015-12-17 17:01 UTC (permalink / raw)
To: linux-arm-kernel
Add debugfs hooks for debugging the execution behavior of the DMA
channel. The debugfs hooks get initialized by the probe function and
uninitialized by the remove function.
A stats file is created in debugfs. The stats file will show the
information about each HIDMA channel as well as each asynchronous job
queued and completed at a given time.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
drivers/dma/qcom/Makefile | 2 +-
drivers/dma/qcom/hidma.c | 3 +
drivers/dma/qcom/hidma.h | 2 +
drivers/dma/qcom/hidma_dbg.c | 219 +++++++++++++++++++++++++++++++++++++++++++
4 files changed, 225 insertions(+), 1 deletion(-)
create mode 100644 drivers/dma/qcom/hidma_dbg.c
diff --git a/drivers/dma/qcom/Makefile b/drivers/dma/qcom/Makefile
index 6bf9267..4bfc38b 100644
--- a/drivers/dma/qcom/Makefile
+++ b/drivers/dma/qcom/Makefile
@@ -2,4 +2,4 @@ obj-$(CONFIG_QCOM_BAM_DMA) += bam_dma.o
obj-$(CONFIG_QCOM_HIDMA_MGMT) += hdma_mgmt.o
hdma_mgmt-objs := hidma_mgmt.o hidma_mgmt_sys.o
obj-$(CONFIG_QCOM_HIDMA) += hdma.o
-hdma-objs := hidma_ll.o hidma.o
+hdma-objs := hidma_ll.o hidma.o hidma_dbg.o
diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
index f8960f1..833db9e 100644
--- a/drivers/dma/qcom/hidma.c
+++ b/drivers/dma/qcom/hidma.c
@@ -681,6 +681,7 @@ static int hidma_probe(struct platform_device *pdev)
dmadev->irq = chirq;
tasklet_init(&dmadev->task, hidma_issue_task, (unsigned long)dmadev);
+ hidma_debug_init(dmadev);
dev_info(&pdev->dev, "HI-DMA engine driver registration complete\n");
platform_set_drvdata(pdev, dmadev);
pm_runtime_mark_last_busy(dmadev->ddev.dev);
@@ -689,6 +690,7 @@ static int hidma_probe(struct platform_device *pdev)
return 0;
uninit:
+ hidma_debug_uninit(dmadev);
hidma_ll_uninit(dmadev->lldev);
dmafree:
if (dmadev)
@@ -706,6 +708,7 @@ static int hidma_remove(struct platform_device *pdev)
pm_runtime_get_sync(dmadev->ddev.dev);
dma_async_device_unregister(&dmadev->ddev);
devm_free_irq(dmadev->ddev.dev, dmadev->irq, dmadev->lldev);
+ hidma_debug_uninit(dmadev);
hidma_ll_uninit(dmadev->lldev);
hidma_free(dmadev);
diff --git a/drivers/dma/qcom/hidma.h b/drivers/dma/qcom/hidma.h
index 1e09d7c..c6b3ae0 100644
--- a/drivers/dma/qcom/hidma.h
+++ b/drivers/dma/qcom/hidma.h
@@ -157,4 +157,6 @@ int hidma_ll_uninit(struct hidma_lldev *llhndl);
irqreturn_t hidma_ll_inthandler(int irq, void *arg);
void hidma_cleanup_pending_tre(struct hidma_lldev *llhndl, u8 err_info,
u8 err_code);
+int hidma_debug_init(struct hidma_dev *dmadev);
+void hidma_debug_uninit(struct hidma_dev *dmadev);
#endif
diff --git a/drivers/dma/qcom/hidma_dbg.c b/drivers/dma/qcom/hidma_dbg.c
new file mode 100644
index 0000000..fe35002
--- /dev/null
+++ b/drivers/dma/qcom/hidma_dbg.c
@@ -0,0 +1,219 @@
+/*
+ * Qualcomm Technologies HIDMA debug file
+ *
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/pm_runtime.h>
+
+#include "hidma.h"
+
+static void hidma_ll_chstats(struct seq_file *s, void *llhndl, u32 tre_ch)
+{
+ struct hidma_lldev *lldev = llhndl;
+ struct hidma_tre *tre;
+ u32 length;
+ dma_addr_t src_start;
+ dma_addr_t dest_start;
+ u32 *tre_local;
+
+ if (tre_ch >= lldev->nr_tres) {
+ dev_err(lldev->dev, "invalid TRE number in chstats:%d", tre_ch);
+ return;
+ }
+ tre = &lldev->trepool[tre_ch];
+ seq_printf(s, "------Channel %d -----\n", tre_ch);
+ seq_printf(s, "allocated=%d\n", atomic_read(&tre->allocated));
+ seq_printf(s, "queued = 0x%x\n", tre->queued);
+ seq_printf(s, "err_info = 0x%x\n",
+ lldev->tx_status_list[tre->idx].err_info);
+ seq_printf(s, "err_code = 0x%x\n",
+ lldev->tx_status_list[tre->idx].err_code);
+ seq_printf(s, "status = 0x%x\n", tre->status);
+ seq_printf(s, "idx = 0x%x\n", tre->idx);
+ seq_printf(s, "dma_sig = 0x%x\n", tre->dma_sig);
+ seq_printf(s, "dev_name=%s\n", tre->dev_name);
+ seq_printf(s, "callback=%p\n", tre->callback);
+ seq_printf(s, "data=%p\n", tre->data);
+ seq_printf(s, "tre_index = 0x%x\n", tre->tre_index);
+
+ tre_local = &tre->tre_local[0];
+ src_start = tre_local[TRE_SRC_LOW_IDX];
+ src_start = ((u64) (tre_local[TRE_SRC_HI_IDX]) << 32) + src_start;
+ dest_start = tre_local[TRE_DEST_LOW_IDX];
+ dest_start += ((u64) (tre_local[TRE_DEST_HI_IDX]) << 32);
+ length = tre_local[TRE_LEN_IDX];
+
+ seq_printf(s, "src=%pap\n", &src_start);
+ seq_printf(s, "dest=%pap\n", &dest_start);
+ seq_printf(s, "length = 0x%x\n", length);
+}
+
+static void hidma_ll_devstats(struct seq_file *s, void *llhndl)
+{
+ struct hidma_lldev *lldev = llhndl;
+
+ seq_puts(s, "------Device -----\n");
+ seq_printf(s, "lldev init = 0x%x\n", lldev->initialized);
+ seq_printf(s, "trch_state = 0x%x\n", lldev->trch_state);
+ seq_printf(s, "evch_state = 0x%x\n", lldev->evch_state);
+ seq_printf(s, "chidx = 0x%x\n", lldev->chidx);
+ seq_printf(s, "nr_tres = 0x%x\n", lldev->nr_tres);
+ seq_printf(s, "trca=%p\n", lldev->trca);
+ seq_printf(s, "tre_ring=%p\n", lldev->tre_ring);
+ seq_printf(s, "tre_ring_handle=%pap\n", &lldev->tre_ring_handle);
+ seq_printf(s, "tre_ring_size = 0x%x\n", lldev->tre_ring_size);
+ seq_printf(s, "tre_processed_off = 0x%x\n", lldev->tre_processed_off);
+ seq_printf(s, "pending_tre_count=%d\n", lldev->pending_tre_count);
+ seq_printf(s, "evca=%p\n", lldev->evca);
+ seq_printf(s, "evre_ring=%p\n", lldev->evre_ring);
+ seq_printf(s, "evre_ring_handle=%pap\n", &lldev->evre_ring_handle);
+ seq_printf(s, "evre_ring_size = 0x%x\n", lldev->evre_ring_size);
+ seq_printf(s, "evre_processed_off = 0x%x\n", lldev->evre_processed_off);
+ seq_printf(s, "tre_write_offset = 0x%x\n", lldev->tre_write_offset);
+}
+
+/*
+ * hidma_chan_stats: display HIDMA channel statistics
+ *
+ * Display the statistics for the current HIDMA virtual channel device.
+ */
+static int hidma_chan_stats(struct seq_file *s, void *unused)
+{
+ struct hidma_chan *mchan = s->private;
+ struct hidma_desc *mdesc;
+ struct hidma_dev *dmadev = mchan->dmadev;
+
+ pm_runtime_get_sync(dmadev->ddev.dev);
+ seq_printf(s, "paused=%u\n", mchan->paused);
+ seq_printf(s, "dma_sig=%u\n", mchan->dma_sig);
+ seq_puts(s, "prepared\n");
+ list_for_each_entry(mdesc, &mchan->prepared, node)
+ hidma_ll_chstats(s, mchan->dmadev->lldev, mdesc->tre_ch);
+
+ seq_puts(s, "active\n");
+ list_for_each_entry(mdesc, &mchan->active, node)
+ hidma_ll_chstats(s, mchan->dmadev->lldev, mdesc->tre_ch);
+
+ seq_puts(s, "completed\n");
+ list_for_each_entry(mdesc, &mchan->completed, node)
+ hidma_ll_chstats(s, mchan->dmadev->lldev, mdesc->tre_ch);
+
+ hidma_ll_devstats(s, mchan->dmadev->lldev);
+ pm_runtime_mark_last_busy(dmadev->ddev.dev);
+ pm_runtime_put_autosuspend(dmadev->ddev.dev);
+ return 0;
+}
+
+/*
+ * hidma_dma_info: display HIDMA device info
+ *
+ * Display the info for the current HIDMA device.
+ */
+static int hidma_dma_info(struct seq_file *s, void *unused)
+{
+ struct hidma_dev *dmadev = s->private;
+ resource_size_t sz;
+
+ seq_printf(s, "nr_descriptors=%d\n", dmadev->nr_descriptors);
+ seq_printf(s, "dev_trca=%p\n", &dmadev->dev_trca);
+ seq_printf(s, "dev_trca_phys=%pa\n", &dmadev->trca_resource->start);
+ sz = resource_size(dmadev->trca_resource);
+ seq_printf(s, "dev_trca_size=%pa\n", &sz);
+ seq_printf(s, "dev_evca=%p\n", &dmadev->dev_evca);
+ seq_printf(s, "dev_evca_phys=%pa\n", &dmadev->evca_resource->start);
+ sz = resource_size(dmadev->evca_resource);
+ seq_printf(s, "dev_evca_size=%pa\n", &sz);
+ return 0;
+}
+
+static int hidma_chan_stats_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, hidma_chan_stats, inode->i_private);
+}
+
+static int hidma_dma_info_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, hidma_dma_info, inode->i_private);
+}
+
+static const struct file_operations hidma_chan_fops = {
+ .open = hidma_chan_stats_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static const struct file_operations hidma_dma_fops = {
+ .open = hidma_dma_info_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+void hidma_debug_uninit(struct hidma_dev *dmadev)
+{
+ debugfs_remove_recursive(dmadev->debugfs);
+ debugfs_remove_recursive(dmadev->stats);
+}
+
+int hidma_debug_init(struct hidma_dev *dmadev)
+{
+ int rc = 0;
+ int chidx = 0;
+ struct list_head *position = NULL;
+
+ dmadev->debugfs = debugfs_create_dir(dev_name(dmadev->ddev.dev), NULL);
+ if (!dmadev->debugfs) {
+ rc = -ENODEV;
+ return rc;
+ }
+
+ /* walk through the virtual channel list */
+ list_for_each(position, &dmadev->ddev.channels) {
+ struct hidma_chan *chan;
+
+ chan = list_entry(position, struct hidma_chan,
+ chan.device_node);
+ sprintf(chan->dbg_name, "chan%d", chidx);
+ chan->debugfs = debugfs_create_dir(chan->dbg_name,
+ dmadev->debugfs);
+ if (!chan->debugfs) {
+ rc = -ENOMEM;
+ goto cleanup;
+ }
+ chan->stats = debugfs_create_file("stats", S_IRUGO,
+ chan->debugfs, chan,
+ &hidma_chan_fops);
+ if (!chan->stats) {
+ rc = -ENOMEM;
+ goto cleanup;
+ }
+ chidx++;
+ }
+
+ dmadev->stats = debugfs_create_file("stats", S_IRUGO,
+ dmadev->debugfs, dmadev,
+ &hidma_dma_fops);
+ if (!dmadev->stats) {
+ rc = -ENOMEM;
+ goto cleanup;
+ }
+
+ return 0;
+cleanup:
+ hidma_debug_uninit(dmadev);
+ return rc;
+}
--
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [PATCH V10 7/7] dma: qcom_hidma: add support for object hierarchy
2015-12-17 17:01 ` Sinan Kaya
@ 2015-12-17 17:01 ` Sinan Kaya
-1 siblings, 0 replies; 35+ messages in thread
From: Sinan Kaya @ 2015-12-17 17:01 UTC (permalink / raw)
To: dmaengine, mark.rutland, timur, devicetree, cov, vinod.koul, jcm
Cc: agross, arnd, linux-arm-msm, linux-arm-kernel, Sinan Kaya, linux-kernel
In order to create a relationship model between the channels and the
management object, we are adding support for object hierarchy to the
drivers. This patch simplifies the userspace application development.
We will not have to traverse different firmware paths based on device
tree or ACPI baed kernels.
No matter what flavor of kernel is used, objects will be represented as
platform devices.
The new layout is as follows:
hidmam_10: hidma-mgmt@0x5A000000 {
compatible = "qcom,hidma-mgmt-1.0";
...
hidma_10: hidma@0x5a010000 {
compatible = "qcom,hidma-1.0";
...
}
}
The hidma_mgmt_init detects each instance of the hidma-mgmt-1.0 objects
in device tree and calls into the channel driver to create platform devices
for each child of the management object.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
Documentation/ABI/testing/sysfs-platform-hidma | 9 +++
drivers/dma/qcom/hidma.c | 39 +++++++++-
drivers/dma/qcom/hidma_mgmt.c | 103 ++++++++++++++++++++++++-
3 files changed, 147 insertions(+), 4 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-platform-hidma
diff --git a/Documentation/ABI/testing/sysfs-platform-hidma b/Documentation/ABI/testing/sysfs-platform-hidma
new file mode 100644
index 0000000..d364415
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-hidma
@@ -0,0 +1,9 @@
+What: /sys/devices/platform/hidma-*/chid
+ /sys/devices/platform/QCOM8061:*/chid
+Date: Dec 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Contains the ID of the channel within the HIDMA instance.
+ It is used to associate a given HIDMA channel with the
+ priority and weight calls in the management interface.
diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
index 833db9e..ac20bdb 100644
--- a/drivers/dma/qcom/hidma.c
+++ b/drivers/dma/qcom/hidma.c
@@ -549,6 +549,43 @@ static irqreturn_t hidma_chirq_handler(int chirq, void *arg)
return hidma_ll_inthandler(chirq, lldev);
}
+static ssize_t hidma_show_values(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct hidma_dev *mdev = platform_get_drvdata(pdev);
+
+ buf[0] = 0;
+
+ if (strcmp(attr->attr.name, "chid") == 0)
+ sprintf(buf, "%d\n", mdev->chidx);
+
+ return strlen(buf);
+}
+
+static int hidma_create_sysfs_entry(struct hidma_dev *dev, char *name,
+ int mode)
+{
+ struct device_attribute *attrs;
+ char *name_copy;
+
+ attrs = devm_kmalloc(dev->ddev.dev, sizeof(struct device_attribute),
+ GFP_KERNEL);
+ if (!attrs)
+ return -ENOMEM;
+
+ name_copy = devm_kstrdup(dev->ddev.dev, name, GFP_KERNEL);
+ if (!name_copy)
+ return -ENOMEM;
+
+ attrs->attr.name = name_copy;
+ attrs->attr.mode = mode;
+ attrs->show = hidma_show_values;
+ sysfs_attr_init(&attrs->attr);
+
+ return device_create_file(dev->ddev.dev, attrs);
+}
+
static int hidma_probe(struct platform_device *pdev)
{
struct hidma_dev *dmadev;
@@ -682,6 +719,7 @@ static int hidma_probe(struct platform_device *pdev)
dmadev->irq = chirq;
tasklet_init(&dmadev->task, hidma_issue_task, (unsigned long)dmadev);
hidma_debug_init(dmadev);
+ hidma_create_sysfs_entry(dmadev, "chid", S_IRUGO);
dev_info(&pdev->dev, "HI-DMA engine driver registration complete\n");
platform_set_drvdata(pdev, dmadev);
pm_runtime_mark_last_busy(dmadev->ddev.dev);
@@ -730,7 +768,6 @@ static const struct of_device_id hidma_match[] = {
{.compatible = "qcom,hidma-1.0",},
{},
};
-
MODULE_DEVICE_TABLE(of, hidma_match);
static struct platform_driver hidma_driver = {
diff --git a/drivers/dma/qcom/hidma_mgmt.c b/drivers/dma/qcom/hidma_mgmt.c
index ef491b8..d387338 100644
--- a/drivers/dma/qcom/hidma_mgmt.c
+++ b/drivers/dma/qcom/hidma_mgmt.c
@@ -17,13 +17,14 @@
#include <linux/acpi.h>
#include <linux/of.h>
#include <linux/property.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
#include <linux/module.h>
#include <linux/uaccess.h>
#include <linux/slab.h>
#include <linux/pm_runtime.h>
#include <linux/bitops.h>
+#include <linux/dma-mapping.h>
#include "hidma_mgmt.h"
@@ -298,5 +299,101 @@ static struct platform_driver hidma_mgmt_driver = {
},
};
-module_platform_driver(hidma_mgmt_driver);
+#ifdef CONFIG_OF
+static int object_counter;
+
+static int __init hidma_mgmt_of_populate_channels(struct device_node *np)
+{
+ struct platform_device *pdev_parent = of_find_device_by_node(np);
+ struct platform_device_info pdevinfo;
+ struct of_phandle_args out_irq;
+ struct device_node *child;
+ struct resource *res;
+ const __be32 *cell;
+ int ret = 0, size, i, num;
+ u64 addr, addr_size;
+
+ for_each_available_child_of_node(np, child) {
+ int iter = 0;
+
+ cell = of_get_property(child, "reg", &size);
+ if (!cell) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ size /= (sizeof(*cell));
+ num = size /
+ (of_n_addr_cells(child) + of_n_size_cells(child)) + 1;
+
+ /* allocate a resource array */
+ res = kcalloc(num, sizeof(*res), GFP_KERNEL);
+ if (!res) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* read each reg value */
+ i = 0;
+ while (i < size) {
+ addr = of_read_number(&cell[i],
+ of_n_addr_cells(child));
+ i += of_n_addr_cells(child);
+
+ addr_size = of_read_number(&cell[i],
+ of_n_size_cells(child));
+ i += of_n_size_cells(child);
+
+ res[iter].start = addr;
+ res[iter].end = res[iter].start + addr_size - 1;
+ res[iter].flags = IORESOURCE_MEM;
+ iter++;
+ }
+
+ ret = of_irq_parse_one(child, 0, &out_irq);
+ if (ret)
+ goto out;
+
+ res[iter].start = irq_create_of_mapping(&out_irq);
+ res[iter].name = "hidma event irq";
+ res[iter].flags = IORESOURCE_IRQ;
+
+ pdevinfo.fwnode = &child->fwnode;
+ pdevinfo.parent = pdev_parent ? &pdev_parent->dev : NULL;
+ pdevinfo.name = child->name;
+ pdevinfo.id = object_counter++;
+ pdevinfo.res = res;
+ pdevinfo.num_res = num;
+ pdevinfo.data = NULL;
+ pdevinfo.size_data = 0;
+ pdevinfo.dma_mask = DMA_BIT_MASK(64);
+ platform_device_register_full(&pdevinfo);
+
+ kfree(res);
+ res = NULL;
+ }
+out:
+ kfree(res);
+
+ return ret;
+}
+#endif
+
+static int __init hidma_mgmt_init(void)
+{
+#ifdef CONFIG_OF
+ struct device_node *child;
+
+ for (child = of_find_matching_node(NULL, hidma_mgmt_match); child;
+ child = of_find_matching_node(child, hidma_mgmt_match)) {
+ /* device tree based firmware here */
+ hidma_mgmt_of_populate_channels(child);
+ of_node_put(child);
+ }
+#endif
+ platform_driver_register(&hidma_mgmt_driver);
+
+ return 0;
+}
+module_init(hidma_mgmt_init);
MODULE_LICENSE("GPL v2");
--
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH V10 7/7] dma: qcom_hidma: add support for object hierarchy
@ 2015-12-17 17:01 ` Sinan Kaya
0 siblings, 0 replies; 35+ messages in thread
From: Sinan Kaya @ 2015-12-17 17:01 UTC (permalink / raw)
To: linux-arm-kernel
In order to create a relationship model between the channels and the
management object, we are adding support for object hierarchy to the
drivers. This patch simplifies the userspace application development.
We will not have to traverse different firmware paths based on device
tree or ACPI baed kernels.
No matter what flavor of kernel is used, objects will be represented as
platform devices.
The new layout is as follows:
hidmam_10: hidma-mgmt at 0x5A000000 {
compatible = "qcom,hidma-mgmt-1.0";
...
hidma_10: hidma at 0x5a010000 {
compatible = "qcom,hidma-1.0";
...
}
}
The hidma_mgmt_init detects each instance of the hidma-mgmt-1.0 objects
in device tree and calls into the channel driver to create platform devices
for each child of the management object.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
Documentation/ABI/testing/sysfs-platform-hidma | 9 +++
drivers/dma/qcom/hidma.c | 39 +++++++++-
drivers/dma/qcom/hidma_mgmt.c | 103 ++++++++++++++++++++++++-
3 files changed, 147 insertions(+), 4 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-platform-hidma
diff --git a/Documentation/ABI/testing/sysfs-platform-hidma b/Documentation/ABI/testing/sysfs-platform-hidma
new file mode 100644
index 0000000..d364415
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-hidma
@@ -0,0 +1,9 @@
+What: /sys/devices/platform/hidma-*/chid
+ /sys/devices/platform/QCOM8061:*/chid
+Date: Dec 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Contains the ID of the channel within the HIDMA instance.
+ It is used to associate a given HIDMA channel with the
+ priority and weight calls in the management interface.
diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
index 833db9e..ac20bdb 100644
--- a/drivers/dma/qcom/hidma.c
+++ b/drivers/dma/qcom/hidma.c
@@ -549,6 +549,43 @@ static irqreturn_t hidma_chirq_handler(int chirq, void *arg)
return hidma_ll_inthandler(chirq, lldev);
}
+static ssize_t hidma_show_values(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct hidma_dev *mdev = platform_get_drvdata(pdev);
+
+ buf[0] = 0;
+
+ if (strcmp(attr->attr.name, "chid") == 0)
+ sprintf(buf, "%d\n", mdev->chidx);
+
+ return strlen(buf);
+}
+
+static int hidma_create_sysfs_entry(struct hidma_dev *dev, char *name,
+ int mode)
+{
+ struct device_attribute *attrs;
+ char *name_copy;
+
+ attrs = devm_kmalloc(dev->ddev.dev, sizeof(struct device_attribute),
+ GFP_KERNEL);
+ if (!attrs)
+ return -ENOMEM;
+
+ name_copy = devm_kstrdup(dev->ddev.dev, name, GFP_KERNEL);
+ if (!name_copy)
+ return -ENOMEM;
+
+ attrs->attr.name = name_copy;
+ attrs->attr.mode = mode;
+ attrs->show = hidma_show_values;
+ sysfs_attr_init(&attrs->attr);
+
+ return device_create_file(dev->ddev.dev, attrs);
+}
+
static int hidma_probe(struct platform_device *pdev)
{
struct hidma_dev *dmadev;
@@ -682,6 +719,7 @@ static int hidma_probe(struct platform_device *pdev)
dmadev->irq = chirq;
tasklet_init(&dmadev->task, hidma_issue_task, (unsigned long)dmadev);
hidma_debug_init(dmadev);
+ hidma_create_sysfs_entry(dmadev, "chid", S_IRUGO);
dev_info(&pdev->dev, "HI-DMA engine driver registration complete\n");
platform_set_drvdata(pdev, dmadev);
pm_runtime_mark_last_busy(dmadev->ddev.dev);
@@ -730,7 +768,6 @@ static const struct of_device_id hidma_match[] = {
{.compatible = "qcom,hidma-1.0",},
{},
};
-
MODULE_DEVICE_TABLE(of, hidma_match);
static struct platform_driver hidma_driver = {
diff --git a/drivers/dma/qcom/hidma_mgmt.c b/drivers/dma/qcom/hidma_mgmt.c
index ef491b8..d387338 100644
--- a/drivers/dma/qcom/hidma_mgmt.c
+++ b/drivers/dma/qcom/hidma_mgmt.c
@@ -17,13 +17,14 @@
#include <linux/acpi.h>
#include <linux/of.h>
#include <linux/property.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
#include <linux/module.h>
#include <linux/uaccess.h>
#include <linux/slab.h>
#include <linux/pm_runtime.h>
#include <linux/bitops.h>
+#include <linux/dma-mapping.h>
#include "hidma_mgmt.h"
@@ -298,5 +299,101 @@ static struct platform_driver hidma_mgmt_driver = {
},
};
-module_platform_driver(hidma_mgmt_driver);
+#ifdef CONFIG_OF
+static int object_counter;
+
+static int __init hidma_mgmt_of_populate_channels(struct device_node *np)
+{
+ struct platform_device *pdev_parent = of_find_device_by_node(np);
+ struct platform_device_info pdevinfo;
+ struct of_phandle_args out_irq;
+ struct device_node *child;
+ struct resource *res;
+ const __be32 *cell;
+ int ret = 0, size, i, num;
+ u64 addr, addr_size;
+
+ for_each_available_child_of_node(np, child) {
+ int iter = 0;
+
+ cell = of_get_property(child, "reg", &size);
+ if (!cell) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ size /= (sizeof(*cell));
+ num = size /
+ (of_n_addr_cells(child) + of_n_size_cells(child)) + 1;
+
+ /* allocate a resource array */
+ res = kcalloc(num, sizeof(*res), GFP_KERNEL);
+ if (!res) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* read each reg value */
+ i = 0;
+ while (i < size) {
+ addr = of_read_number(&cell[i],
+ of_n_addr_cells(child));
+ i += of_n_addr_cells(child);
+
+ addr_size = of_read_number(&cell[i],
+ of_n_size_cells(child));
+ i += of_n_size_cells(child);
+
+ res[iter].start = addr;
+ res[iter].end = res[iter].start + addr_size - 1;
+ res[iter].flags = IORESOURCE_MEM;
+ iter++;
+ }
+
+ ret = of_irq_parse_one(child, 0, &out_irq);
+ if (ret)
+ goto out;
+
+ res[iter].start = irq_create_of_mapping(&out_irq);
+ res[iter].name = "hidma event irq";
+ res[iter].flags = IORESOURCE_IRQ;
+
+ pdevinfo.fwnode = &child->fwnode;
+ pdevinfo.parent = pdev_parent ? &pdev_parent->dev : NULL;
+ pdevinfo.name = child->name;
+ pdevinfo.id = object_counter++;
+ pdevinfo.res = res;
+ pdevinfo.num_res = num;
+ pdevinfo.data = NULL;
+ pdevinfo.size_data = 0;
+ pdevinfo.dma_mask = DMA_BIT_MASK(64);
+ platform_device_register_full(&pdevinfo);
+
+ kfree(res);
+ res = NULL;
+ }
+out:
+ kfree(res);
+
+ return ret;
+}
+#endif
+
+static int __init hidma_mgmt_init(void)
+{
+#ifdef CONFIG_OF
+ struct device_node *child;
+
+ for (child = of_find_matching_node(NULL, hidma_mgmt_match); child;
+ child = of_find_matching_node(child, hidma_mgmt_match)) {
+ /* device tree based firmware here */
+ hidma_mgmt_of_populate_channels(child);
+ of_node_put(child);
+ }
+#endif
+ platform_driver_register(&hidma_mgmt_driver);
+
+ return 0;
+}
+module_init(hidma_mgmt_init);
MODULE_LICENSE("GPL v2");
--
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 35+ messages in thread* Re: [PATCH V10 7/7] dma: qcom_hidma: add support for object hierarchy
2015-12-17 17:01 ` Sinan Kaya
(?)
@ 2015-12-19 7:14 ` kbuild test robot
-1 siblings, 0 replies; 35+ messages in thread
From: kbuild test robot @ 2015-12-19 7:14 UTC (permalink / raw)
Cc: kbuild-all, dmaengine, mark.rutland, timur, devicetree, cov,
vinod.koul, jcm, agross, arnd, linux-arm-msm, linux-arm-kernel,
Sinan Kaya, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 857 bytes --]
Hi Sinan,
[auto build test ERROR on v4.4-rc5]
[also build test ERROR on next-20151218]
url: https://github.com/0day-ci/linux/commits/Sinan-Kaya/dma-add-Qualcomm-Technologies-HIDMA-driver/20151218-010637
config: sparc-allyesconfig (attached as .config)
reproduce:
wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=sparc
All errors (new ones prefixed by >>):
drivers/built-in.o: In function `hidma_mgmt_of_populate_channels':
>> hidma_mgmt.c:(.init.text+0x5cc8): undefined reference to `of_irq_parse_one'
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
[-- Attachment #2: .config.gz --]
[-- Type: application/octet-stream, Size: 44406 bytes --]
^ permalink raw reply [flat|nested] 35+ messages in thread* [PATCH V10 7/7] dma: qcom_hidma: add support for object hierarchy
@ 2015-12-19 7:14 ` kbuild test robot
0 siblings, 0 replies; 35+ messages in thread
From: kbuild test robot @ 2015-12-19 7:14 UTC (permalink / raw)
To: linux-arm-kernel
Hi Sinan,
[auto build test ERROR on v4.4-rc5]
[also build test ERROR on next-20151218]
url: https://github.com/0day-ci/linux/commits/Sinan-Kaya/dma-add-Qualcomm-Technologies-HIDMA-driver/20151218-010637
config: sparc-allyesconfig (attached as .config)
reproduce:
wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=sparc
All errors (new ones prefixed by >>):
drivers/built-in.o: In function `hidma_mgmt_of_populate_channels':
>> hidma_mgmt.c:(.init.text+0x5cc8): undefined reference to `of_irq_parse_one'
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
-------------- next part --------------
A non-text attachment was scrubbed...
Name: .config.gz
Type: application/octet-stream
Size: 44406 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151219/cd75a00a/attachment-0001.obj>
^ permalink raw reply [flat|nested] 35+ messages in thread* Re: [PATCH V10 7/7] dma: qcom_hidma: add support for object hierarchy
@ 2015-12-19 7:14 ` kbuild test robot
0 siblings, 0 replies; 35+ messages in thread
From: kbuild test robot @ 2015-12-19 7:14 UTC (permalink / raw)
To: Sinan Kaya
Cc: kbuild-all, dmaengine, mark.rutland, timur, devicetree, cov,
vinod.koul, jcm, agross, arnd, linux-arm-msm, linux-arm-kernel,
Sinan Kaya, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 857 bytes --]
Hi Sinan,
[auto build test ERROR on v4.4-rc5]
[also build test ERROR on next-20151218]
url: https://github.com/0day-ci/linux/commits/Sinan-Kaya/dma-add-Qualcomm-Technologies-HIDMA-driver/20151218-010637
config: sparc-allyesconfig (attached as .config)
reproduce:
wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=sparc
All errors (new ones prefixed by >>):
drivers/built-in.o: In function `hidma_mgmt_of_populate_channels':
>> hidma_mgmt.c:(.init.text+0x5cc8): undefined reference to `of_irq_parse_one'
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
[-- Attachment #2: .config.gz --]
[-- Type: application/octet-stream, Size: 44406 bytes --]
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH V10 7/7] dma: qcom_hidma: add support for object hierarchy
2015-12-17 17:01 ` Sinan Kaya
(?)
@ 2015-12-19 7:37 ` kbuild test robot
-1 siblings, 0 replies; 35+ messages in thread
From: kbuild test robot @ 2015-12-19 7:37 UTC (permalink / raw)
Cc: kbuild-all, dmaengine, mark.rutland, timur, devicetree, cov,
vinod.koul, jcm, agross, arnd, linux-arm-msm, linux-arm-kernel,
Sinan Kaya, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 784 bytes --]
Hi Sinan,
[auto build test ERROR on v4.4-rc5]
[also build test ERROR on next-20151218]
url: https://github.com/0day-ci/linux/commits/Sinan-Kaya/dma-add-Qualcomm-Technologies-HIDMA-driver/20151218-010637
config: sparc64-allmodconfig (attached as .config)
reproduce:
wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=sparc64
All errors (new ones prefixed by >>):
>> ERROR: "of_irq_parse_one" [drivers/dma/qcom/hdma_mgmt.ko] undefined!
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
[-- Attachment #2: .config.gz --]
[-- Type: application/octet-stream, Size: 44094 bytes --]
^ permalink raw reply [flat|nested] 35+ messages in thread* [PATCH V10 7/7] dma: qcom_hidma: add support for object hierarchy
@ 2015-12-19 7:37 ` kbuild test robot
0 siblings, 0 replies; 35+ messages in thread
From: kbuild test robot @ 2015-12-19 7:37 UTC (permalink / raw)
To: linux-arm-kernel
Hi Sinan,
[auto build test ERROR on v4.4-rc5]
[also build test ERROR on next-20151218]
url: https://github.com/0day-ci/linux/commits/Sinan-Kaya/dma-add-Qualcomm-Technologies-HIDMA-driver/20151218-010637
config: sparc64-allmodconfig (attached as .config)
reproduce:
wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=sparc64
All errors (new ones prefixed by >>):
>> ERROR: "of_irq_parse_one" [drivers/dma/qcom/hdma_mgmt.ko] undefined!
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
-------------- next part --------------
A non-text attachment was scrubbed...
Name: .config.gz
Type: application/octet-stream
Size: 44094 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151219/34964eef/attachment-0001.obj>
^ permalink raw reply [flat|nested] 35+ messages in thread* Re: [PATCH V10 7/7] dma: qcom_hidma: add support for object hierarchy
@ 2015-12-19 7:37 ` kbuild test robot
0 siblings, 0 replies; 35+ messages in thread
From: kbuild test robot @ 2015-12-19 7:37 UTC (permalink / raw)
To: Sinan Kaya
Cc: kbuild-all, dmaengine, mark.rutland, timur, devicetree, cov,
vinod.koul, jcm, agross, arnd, linux-arm-msm, linux-arm-kernel,
Sinan Kaya, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 784 bytes --]
Hi Sinan,
[auto build test ERROR on v4.4-rc5]
[also build test ERROR on next-20151218]
url: https://github.com/0day-ci/linux/commits/Sinan-Kaya/dma-add-Qualcomm-Technologies-HIDMA-driver/20151218-010637
config: sparc64-allmodconfig (attached as .config)
reproduce:
wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=sparc64
All errors (new ones prefixed by >>):
>> ERROR: "of_irq_parse_one" [drivers/dma/qcom/hdma_mgmt.ko] undefined!
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
[-- Attachment #2: .config.gz --]
[-- Type: application/octet-stream, Size: 44094 bytes --]
^ permalink raw reply [flat|nested] 35+ messages in thread* Re: [PATCH V10 7/7] dma: qcom_hidma: add support for object hierarchy
2015-12-19 7:37 ` kbuild test robot
@ 2015-12-21 22:05 ` Okaya at codeaurora.org
-1 siblings, 0 replies; 35+ messages in thread
From: Okaya @ 2015-12-21 22:05 UTC (permalink / raw)
To: kbuild test robot
Cc: Sinan Kaya, kbuild-all, dmaengine, mark.rutland, timur,
devicetree, cov, vinod.koul, jcm, agross, arnd, linux-arm-msm,
linux-arm-kernel, linux-kernel
> Hi Sinan,
>
> [auto build test ERROR on v4.4-rc5]
> [also build test ERROR on next-20151218]
>
> url:
> https://github.com/0day-ci/linux/commits/Sinan-Kaya/dma-add-Qualcomm-Technologies-HIDMA-driver/20151218-010637
> config: sparc64-allmodconfig (attached as .config)
> reproduce:
> wget
> https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross
> -O ~/bin/make.cross
> chmod +x ~/bin/make.cross
> # save the attached .config to linux build tree
> make.cross ARCH=sparc64
>
> All errors (new ones prefixed by >>):
>
>>> ERROR: "of_irq_parse_one" [drivers/dma/qcom/hdma_mgmt.ko] undefined!
>
> ---
> 0-DAY kernel test infrastructure Open Source Technology
> Center
> https://lists.01.org/pipermail/kbuild-all Intel
> Corporation
>
I am confused about this. The function call is made only if OF is defined.
The function that is being called is defined with extern symbol and
resides in drivers/of/irq.c. how does the sparc arch define OF yet exclude
drivers/of/irq.c
^ permalink raw reply [flat|nested] 35+ messages in thread
[parent not found: <1450371684-23415-8-git-send-email-okaya-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>]
* Re: [PATCH V10 7/7] dma: qcom_hidma: add support for object hierarchy
2015-12-17 17:01 ` Sinan Kaya
(?)
@ 2015-12-19 18:37 ` Andy Shevchenko
-1 siblings, 0 replies; 35+ messages in thread
From: Andy Shevchenko @ 2015-12-19 18:37 UTC (permalink / raw)
To: Sinan Kaya
Cc: dmaengine, Mark Rutland, Timur Tabi, devicetree,
cov-sgV2jX0FEOL9JmXXK+q4OQ, Vinod Koul,
jcm-H+wXaHxf7aLQT0dZR+AlfA, Andy Gross, Arnd Bergmann,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA, linux-arm Mailing List,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
On Thu, Dec 17, 2015 at 7:01 PM, Sinan Kaya <okaya-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> wrote:
> In order to create a relationship model between the channels and the
> management object, we are adding support for object hierarchy to the
> drivers. This patch simplifies the userspace application development.
> We will not have to traverse different firmware paths based on device
> tree or ACPI baed kernels.
>
> No matter what flavor of kernel is used, objects will be represented as
> platform devices.
>
> The new layout is as follows:
>
> hidmam_10: hidma-mgmt@0x5A000000 {
> compatible = "qcom,hidma-mgmt-1.0";
> ...
>
> hidma_10: hidma@0x5a010000 {
> compatible = "qcom,hidma-1.0";
> ...
> }
> }
>
> The hidma_mgmt_init detects each instance of the hidma-mgmt-1.0 objects
> in device tree and calls into the channel driver to create platform devices
> for each child of the management object.
>
> Signed-off-by: Sinan Kaya <okaya-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
> +What: /sys/devices/platform/hidma-*/chid
> + /sys/devices/platform/QCOM8061:*/chid
> +Date: Dec 2015
> +KernelVersion: 4.4
> +Contact: "Sinan Kaya <okaya-kIo0bpQILBj9JmXXK+q4OQ@public.gmane.org>"
> +Description:
> + Contains the ID of the channel within the HIDMA instance.
> + It is used to associate a given HIDMA channel with the
> + priority and weight calls in the management interface.
> -module_platform_driver(hidma_mgmt_driver);
> +#ifdef CONFIG_OF
> +static int object_counter;
> +
> +static int __init hidma_mgmt_of_populate_channels(struct device_node *np)
> +{
> + struct platform_device *pdev_parent = of_find_device_by_node(np);
> + struct platform_device_info pdevinfo;
> + struct of_phandle_args out_irq;
> + struct device_node *child;
> + struct resource *res;
> + const __be32 *cell;
Always BE ?
> + int ret = 0, size, i, num;
> + u64 addr, addr_size;
resource_size_t
> +
> + for_each_available_child_of_node(np, child) {
> + int iter = 0;
> +
> + cell = of_get_property(child, "reg", &size);
> + if (!cell) {
> + ret = -EINVAL;
> + goto out;
> + }
> +
> + size /= (sizeof(*cell));
Redundant parens. I think it might be good to use common sense for
operator precedence, here is a radical example of ignoring it. And
this is not the first case.
> + num = size /
> + (of_n_addr_cells(child) + of_n_size_cells(child)) + 1;
> +
> + /* allocate a resource array */
> + res = kcalloc(num, sizeof(*res), GFP_KERNEL);
> + if (!res) {
> + ret = -ENOMEM;
> + goto out;
> + }
> +
> + /* read each reg value */
> + i = 0;
> + while (i < size) {
> + addr = of_read_number(&cell[i],
> + of_n_addr_cells(child));
> + i += of_n_addr_cells(child);
> +
> + addr_size = of_read_number(&cell[i],
> + of_n_size_cells(child));
> + i += of_n_size_cells(child);
> +
> + res[iter].start = addr;
> + res[iter].end = res[iter].start + addr_size - 1;
> + res[iter].flags = IORESOURCE_MEM;
res->start = …
…
res++;
> + iter++;
> + }
> +
> + ret = of_irq_parse_one(child, 0, &out_irq);
> + if (ret)
> + goto out;
> +
> + res[iter].start = irq_create_of_mapping(&out_irq);
> + res[iter].name = "hidma event irq";
> + res[iter].flags = IORESOURCE_IRQ;
Ditto.
> +
> + pdevinfo.fwnode = &child->fwnode;
> + pdevinfo.parent = pdev_parent ? &pdev_parent->dev : NULL;
> + pdevinfo.name = child->name;
> + pdevinfo.id = object_counter++;
> + pdevinfo.res = res;
> + pdevinfo.num_res = num;
> + pdevinfo.data = NULL;
> + pdevinfo.size_data = 0;
> + pdevinfo.dma_mask = DMA_BIT_MASK(64);
> + platform_device_register_full(&pdevinfo);
> +
> + kfree(res);
> + res = NULL;
> + }
> +out:
> + kfree(res);
> +
> + return ret;
> +}
> +#endif
> +
> +static int __init hidma_mgmt_init(void)
> +{
> +#ifdef CONFIG_OF
> + struct device_node *child;
> +
> + for (child = of_find_matching_node(NULL, hidma_mgmt_match); child;
> + child = of_find_matching_node(child, hidma_mgmt_match)) {
> + /* device tree based firmware here */
> + hidma_mgmt_of_populate_channels(child);
> + of_node_put(child);
> + }
And why this is can't be done in probe of parent node driver?
> +#endif
> + platform_driver_register(&hidma_mgmt_driver);
> +
> + return 0;
> +}
> +module_init(hidma_mgmt_init);
--
With Best Regards,
Andy Shevchenko
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 35+ messages in thread* [PATCH V10 7/7] dma: qcom_hidma: add support for object hierarchy
@ 2015-12-19 18:37 ` Andy Shevchenko
0 siblings, 0 replies; 35+ messages in thread
From: Andy Shevchenko @ 2015-12-19 18:37 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Dec 17, 2015 at 7:01 PM, Sinan Kaya <okaya@codeaurora.org> wrote:
> In order to create a relationship model between the channels and the
> management object, we are adding support for object hierarchy to the
> drivers. This patch simplifies the userspace application development.
> We will not have to traverse different firmware paths based on device
> tree or ACPI baed kernels.
>
> No matter what flavor of kernel is used, objects will be represented as
> platform devices.
>
> The new layout is as follows:
>
> hidmam_10: hidma-mgmt at 0x5A000000 {
> compatible = "qcom,hidma-mgmt-1.0";
> ...
>
> hidma_10: hidma at 0x5a010000 {
> compatible = "qcom,hidma-1.0";
> ...
> }
> }
>
> The hidma_mgmt_init detects each instance of the hidma-mgmt-1.0 objects
> in device tree and calls into the channel driver to create platform devices
> for each child of the management object.
>
> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
> +What: /sys/devices/platform/hidma-*/chid
> + /sys/devices/platform/QCOM8061:*/chid
> +Date: Dec 2015
> +KernelVersion: 4.4
> +Contact: "Sinan Kaya <okaya@cudeaurora.org>"
> +Description:
> + Contains the ID of the channel within the HIDMA instance.
> + It is used to associate a given HIDMA channel with the
> + priority and weight calls in the management interface.
> -module_platform_driver(hidma_mgmt_driver);
> +#ifdef CONFIG_OF
> +static int object_counter;
> +
> +static int __init hidma_mgmt_of_populate_channels(struct device_node *np)
> +{
> + struct platform_device *pdev_parent = of_find_device_by_node(np);
> + struct platform_device_info pdevinfo;
> + struct of_phandle_args out_irq;
> + struct device_node *child;
> + struct resource *res;
> + const __be32 *cell;
Always BE ?
> + int ret = 0, size, i, num;
> + u64 addr, addr_size;
resource_size_t
> +
> + for_each_available_child_of_node(np, child) {
> + int iter = 0;
> +
> + cell = of_get_property(child, "reg", &size);
> + if (!cell) {
> + ret = -EINVAL;
> + goto out;
> + }
> +
> + size /= (sizeof(*cell));
Redundant parens. I think it might be good to use common sense for
operator precedence, here is a radical example of ignoring it. And
this is not the first case.
> + num = size /
> + (of_n_addr_cells(child) + of_n_size_cells(child)) + 1;
> +
> + /* allocate a resource array */
> + res = kcalloc(num, sizeof(*res), GFP_KERNEL);
> + if (!res) {
> + ret = -ENOMEM;
> + goto out;
> + }
> +
> + /* read each reg value */
> + i = 0;
> + while (i < size) {
> + addr = of_read_number(&cell[i],
> + of_n_addr_cells(child));
> + i += of_n_addr_cells(child);
> +
> + addr_size = of_read_number(&cell[i],
> + of_n_size_cells(child));
> + i += of_n_size_cells(child);
> +
> + res[iter].start = addr;
> + res[iter].end = res[iter].start + addr_size - 1;
> + res[iter].flags = IORESOURCE_MEM;
res->start = ?
?
res++;
> + iter++;
> + }
> +
> + ret = of_irq_parse_one(child, 0, &out_irq);
> + if (ret)
> + goto out;
> +
> + res[iter].start = irq_create_of_mapping(&out_irq);
> + res[iter].name = "hidma event irq";
> + res[iter].flags = IORESOURCE_IRQ;
Ditto.
> +
> + pdevinfo.fwnode = &child->fwnode;
> + pdevinfo.parent = pdev_parent ? &pdev_parent->dev : NULL;
> + pdevinfo.name = child->name;
> + pdevinfo.id = object_counter++;
> + pdevinfo.res = res;
> + pdevinfo.num_res = num;
> + pdevinfo.data = NULL;
> + pdevinfo.size_data = 0;
> + pdevinfo.dma_mask = DMA_BIT_MASK(64);
> + platform_device_register_full(&pdevinfo);
> +
> + kfree(res);
> + res = NULL;
> + }
> +out:
> + kfree(res);
> +
> + return ret;
> +}
> +#endif
> +
> +static int __init hidma_mgmt_init(void)
> +{
> +#ifdef CONFIG_OF
> + struct device_node *child;
> +
> + for (child = of_find_matching_node(NULL, hidma_mgmt_match); child;
> + child = of_find_matching_node(child, hidma_mgmt_match)) {
> + /* device tree based firmware here */
> + hidma_mgmt_of_populate_channels(child);
> + of_node_put(child);
> + }
And why this is can't be done in probe of parent node driver?
> +#endif
> + platform_driver_register(&hidma_mgmt_driver);
> +
> + return 0;
> +}
> +module_init(hidma_mgmt_init);
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 35+ messages in thread* Re: [PATCH V10 7/7] dma: qcom_hidma: add support for object hierarchy
@ 2015-12-19 18:37 ` Andy Shevchenko
0 siblings, 0 replies; 35+ messages in thread
From: Andy Shevchenko @ 2015-12-19 18:37 UTC (permalink / raw)
To: Sinan Kaya
Cc: dmaengine, Mark Rutland, Timur Tabi, devicetree, cov, Vinod Koul,
jcm, Andy Gross, Arnd Bergmann, linux-arm-msm,
linux-arm Mailing List, linux-kernel
On Thu, Dec 17, 2015 at 7:01 PM, Sinan Kaya <okaya@codeaurora.org> wrote:
> In order to create a relationship model between the channels and the
> management object, we are adding support for object hierarchy to the
> drivers. This patch simplifies the userspace application development.
> We will not have to traverse different firmware paths based on device
> tree or ACPI baed kernels.
>
> No matter what flavor of kernel is used, objects will be represented as
> platform devices.
>
> The new layout is as follows:
>
> hidmam_10: hidma-mgmt@0x5A000000 {
> compatible = "qcom,hidma-mgmt-1.0";
> ...
>
> hidma_10: hidma@0x5a010000 {
> compatible = "qcom,hidma-1.0";
> ...
> }
> }
>
> The hidma_mgmt_init detects each instance of the hidma-mgmt-1.0 objects
> in device tree and calls into the channel driver to create platform devices
> for each child of the management object.
>
> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
> +What: /sys/devices/platform/hidma-*/chid
> + /sys/devices/platform/QCOM8061:*/chid
> +Date: Dec 2015
> +KernelVersion: 4.4
> +Contact: "Sinan Kaya <okaya@cudeaurora.org>"
> +Description:
> + Contains the ID of the channel within the HIDMA instance.
> + It is used to associate a given HIDMA channel with the
> + priority and weight calls in the management interface.
> -module_platform_driver(hidma_mgmt_driver);
> +#ifdef CONFIG_OF
> +static int object_counter;
> +
> +static int __init hidma_mgmt_of_populate_channels(struct device_node *np)
> +{
> + struct platform_device *pdev_parent = of_find_device_by_node(np);
> + struct platform_device_info pdevinfo;
> + struct of_phandle_args out_irq;
> + struct device_node *child;
> + struct resource *res;
> + const __be32 *cell;
Always BE ?
> + int ret = 0, size, i, num;
> + u64 addr, addr_size;
resource_size_t
> +
> + for_each_available_child_of_node(np, child) {
> + int iter = 0;
> +
> + cell = of_get_property(child, "reg", &size);
> + if (!cell) {
> + ret = -EINVAL;
> + goto out;
> + }
> +
> + size /= (sizeof(*cell));
Redundant parens. I think it might be good to use common sense for
operator precedence, here is a radical example of ignoring it. And
this is not the first case.
> + num = size /
> + (of_n_addr_cells(child) + of_n_size_cells(child)) + 1;
> +
> + /* allocate a resource array */
> + res = kcalloc(num, sizeof(*res), GFP_KERNEL);
> + if (!res) {
> + ret = -ENOMEM;
> + goto out;
> + }
> +
> + /* read each reg value */
> + i = 0;
> + while (i < size) {
> + addr = of_read_number(&cell[i],
> + of_n_addr_cells(child));
> + i += of_n_addr_cells(child);
> +
> + addr_size = of_read_number(&cell[i],
> + of_n_size_cells(child));
> + i += of_n_size_cells(child);
> +
> + res[iter].start = addr;
> + res[iter].end = res[iter].start + addr_size - 1;
> + res[iter].flags = IORESOURCE_MEM;
res->start = …
…
res++;
> + iter++;
> + }
> +
> + ret = of_irq_parse_one(child, 0, &out_irq);
> + if (ret)
> + goto out;
> +
> + res[iter].start = irq_create_of_mapping(&out_irq);
> + res[iter].name = "hidma event irq";
> + res[iter].flags = IORESOURCE_IRQ;
Ditto.
> +
> + pdevinfo.fwnode = &child->fwnode;
> + pdevinfo.parent = pdev_parent ? &pdev_parent->dev : NULL;
> + pdevinfo.name = child->name;
> + pdevinfo.id = object_counter++;
> + pdevinfo.res = res;
> + pdevinfo.num_res = num;
> + pdevinfo.data = NULL;
> + pdevinfo.size_data = 0;
> + pdevinfo.dma_mask = DMA_BIT_MASK(64);
> + platform_device_register_full(&pdevinfo);
> +
> + kfree(res);
> + res = NULL;
> + }
> +out:
> + kfree(res);
> +
> + return ret;
> +}
> +#endif
> +
> +static int __init hidma_mgmt_init(void)
> +{
> +#ifdef CONFIG_OF
> + struct device_node *child;
> +
> + for (child = of_find_matching_node(NULL, hidma_mgmt_match); child;
> + child = of_find_matching_node(child, hidma_mgmt_match)) {
> + /* device tree based firmware here */
> + hidma_mgmt_of_populate_channels(child);
> + of_node_put(child);
> + }
And why this is can't be done in probe of parent node driver?
> +#endif
> + platform_driver_register(&hidma_mgmt_driver);
> +
> + return 0;
> +}
> +module_init(hidma_mgmt_init);
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 35+ messages in thread* Re: [PATCH V10 7/7] dma: qcom_hidma: add support for object hierarchy
2015-12-19 18:37 ` Andy Shevchenko
@ 2015-12-21 22:05 ` Timur Tabi
-1 siblings, 0 replies; 35+ messages in thread
From: Timur Tabi @ 2015-12-21 22:05 UTC (permalink / raw)
To: Andy Shevchenko
Cc: Sinan Kaya, Mark Rutland, devicetree, Arnd Bergmann, Vinod Koul,
Jon Masters, Timur Tabi, linux-kernel, cov, Andy Gross,
dmaengine, linux-arm-msm, linux-arm Mailing List
On Sat, Dec 19, 2015 at 12:37 PM, Andy Shevchenko
<andy.shevchenko@gmail.com> wrote:
>> +static int __init hidma_mgmt_of_populate_channels(struct device_node *np)
>> +{
>> + struct platform_device *pdev_parent = of_find_device_by_node(np);
>> + struct platform_device_info pdevinfo;
>> + struct of_phandle_args out_irq;
>> + struct device_node *child;
>> + struct resource *res;
>> + const __be32 *cell;
>
> Always BE ?
Unless things have changed, device tree properties are always in
big-endian order, even on little-endian systems.
--
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.
^ permalink raw reply [flat|nested] 35+ messages in thread* [PATCH V10 7/7] dma: qcom_hidma: add support for object hierarchy
@ 2015-12-21 22:05 ` Timur Tabi
0 siblings, 0 replies; 35+ messages in thread
From: Timur Tabi @ 2015-12-21 22:05 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, Dec 19, 2015 at 12:37 PM, Andy Shevchenko
<andy.shevchenko@gmail.com> wrote:
>> +static int __init hidma_mgmt_of_populate_channels(struct device_node *np)
>> +{
>> + struct platform_device *pdev_parent = of_find_device_by_node(np);
>> + struct platform_device_info pdevinfo;
>> + struct of_phandle_args out_irq;
>> + struct device_node *child;
>> + struct resource *res;
>> + const __be32 *cell;
>
> Always BE ?
Unless things have changed, device tree properties are always in
big-endian order, even on little-endian systems.
--
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH V10 7/7] dma: qcom_hidma: add support for object hierarchy
2015-12-19 18:37 ` Andy Shevchenko
@ 2015-12-30 15:28 ` Sinan Kaya
-1 siblings, 0 replies; 35+ messages in thread
From: Sinan Kaya @ 2015-12-30 15:28 UTC (permalink / raw)
To: Andy Shevchenko
Cc: dmaengine, Mark Rutland, Timur Tabi, devicetree, cov, Vinod Koul,
jcm, Andy Gross, Arnd Bergmann, linux-arm-msm,
linux-arm Mailing List, linux-kernel
On 12/19/2015 1:37 PM, Andy Shevchenko wrote:
> On Thu, Dec 17, 2015 at 7:01 PM, Sinan Kaya <okaya@codeaurora.org> wrote:
>> In order to create a relationship model between the channels and the
>> management object, we are adding support for object hierarchy to the
>> drivers. This patch simplifies the userspace application development.
>> We will not have to traverse different firmware paths based on device
>> tree or ACPI baed kernels.
>>
>> No matter what flavor of kernel is used, objects will be represented as
>> platform devices.
>>
>> The new layout is as follows:
>>
>> hidmam_10: hidma-mgmt@0x5A000000 {
>> compatible = "qcom,hidma-mgmt-1.0";
>> ...
>>
>> hidma_10: hidma@0x5a010000 {
>> compatible = "qcom,hidma-1.0";
>> ...
>> }
>> }
>>
>> The hidma_mgmt_init detects each instance of the hidma-mgmt-1.0 objects
>> in device tree and calls into the channel driver to create platform devices
>> for each child of the management object.
>>
>> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
>
>
>> +What: /sys/devices/platform/hidma-*/chid
>> + /sys/devices/platform/QCOM8061:*/chid
>> +Date: Dec 2015
>> +KernelVersion: 4.4
>> +Contact: "Sinan Kaya <okaya@cudeaurora.org>"
>> +Description:
>> + Contains the ID of the channel within the HIDMA instance.
>> + It is used to associate a given HIDMA channel with the
>> + priority and weight calls in the management interface.
>
>> -module_platform_driver(hidma_mgmt_driver);
>> +#ifdef CONFIG_OF
>> +static int object_counter;
>> +
>> +static int __init hidma_mgmt_of_populate_channels(struct device_node *np)
>> +{
>> + struct platform_device *pdev_parent = of_find_device_by_node(np);
>> + struct platform_device_info pdevinfo;
>> + struct of_phandle_args out_irq;
>> + struct device_node *child;
>> + struct resource *res;
>> + const __be32 *cell;
>
> Always BE ?
Yes, as Timur indicated device tree is big endian all the time.
>
>> + int ret = 0, size, i, num;
>> + u64 addr, addr_size;
>
> resource_size_t
These values are read from the device tree blob using of_read_number function. of_read_number
returns a u64.
>
>> +
>> + for_each_available_child_of_node(np, child) {
>> + int iter = 0;
>> +
>> + cell = of_get_property(child, "reg", &size);
>> + if (!cell) {
>> + ret = -EINVAL;
>> + goto out;
>> + }
>> +
>> + size /= (sizeof(*cell));
>
> Redundant parens. I think it might be good to use common sense for
> operator precedence, here is a radical example of ignoring it. And
> this is not the first case.
Removed. Note that I copied most of this function from another driver.
>
>> + num = size /
>> + (of_n_addr_cells(child) + of_n_size_cells(child)) + 1;
>> +
>> + /* allocate a resource array */
>> + res = kcalloc(num, sizeof(*res), GFP_KERNEL);
>> + if (!res) {
>> + ret = -ENOMEM;
>> + goto out;
>> + }
>> +
>> + /* read each reg value */
>> + i = 0;
>> + while (i < size) {
>> + addr = of_read_number(&cell[i],
>> + of_n_addr_cells(child));
>> + i += of_n_addr_cells(child);
>> +
>> + addr_size = of_read_number(&cell[i],
>> + of_n_size_cells(child));
>> + i += of_n_size_cells(child);
>> +
>> + res[iter].start = addr;
>> + res[iter].end = res[iter].start + addr_size - 1;
>> + res[iter].flags = IORESOURCE_MEM;
>
> res->start = …
> …
> res++;
ok
>
>> + iter++;
>> + }
>> +
>> + ret = of_irq_parse_one(child, 0, &out_irq);
>> + if (ret)
>> + goto out;
>> +
>> + res[iter].start = irq_create_of_mapping(&out_irq);
>> + res[iter].name = "hidma event irq";
>> + res[iter].flags = IORESOURCE_IRQ;
>
> Ditto.
ok
>
>> +
>> + pdevinfo.fwnode = &child->fwnode;
>> + pdevinfo.parent = pdev_parent ? &pdev_parent->dev : NULL;
>> + pdevinfo.name = child->name;
>> + pdevinfo.id = object_counter++;
>> + pdevinfo.res = res;
>> + pdevinfo.num_res = num;
>> + pdevinfo.data = NULL;
>> + pdevinfo.size_data = 0;
>> + pdevinfo.dma_mask = DMA_BIT_MASK(64);
>> + platform_device_register_full(&pdevinfo);
>> +
>> + kfree(res);
>> + res = NULL;
>> + }
>> +out:
>
>> + kfree(res);
>
>
>> +
>> + return ret;
>> +}
>> +#endif
>> +
>> +static int __init hidma_mgmt_init(void)
>> +{
>> +#ifdef CONFIG_OF
>> + struct device_node *child;
>> +
>> + for (child = of_find_matching_node(NULL, hidma_mgmt_match); child;
>> + child = of_find_matching_node(child, hidma_mgmt_match)) {
>> + /* device tree based firmware here */
>> + hidma_mgmt_of_populate_channels(child);
>> + of_node_put(child);
>> + }
>
> And why this is can't be done in probe of parent node driver?
The populate function creates platform objects using platform_device_register_full function above.
The hidma device driver later probes the object during object enumeration phase.
I tried moving platform_device_register_full into the probe context. The objects got generated but hidma
device driver didn't probe the object. I suppose we are required to create the objects before the probing starts.
I copied this pattern from another driver.
>
>> +#endif
>> + platform_driver_register(&hidma_mgmt_driver);
>> +
>> + return 0;
>> +}
>> +module_init(hidma_mgmt_init);
>
--
Sinan Kaya
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 35+ messages in thread* [PATCH V10 7/7] dma: qcom_hidma: add support for object hierarchy
@ 2015-12-30 15:28 ` Sinan Kaya
0 siblings, 0 replies; 35+ messages in thread
From: Sinan Kaya @ 2015-12-30 15:28 UTC (permalink / raw)
To: linux-arm-kernel
On 12/19/2015 1:37 PM, Andy Shevchenko wrote:
> On Thu, Dec 17, 2015 at 7:01 PM, Sinan Kaya <okaya@codeaurora.org> wrote:
>> In order to create a relationship model between the channels and the
>> management object, we are adding support for object hierarchy to the
>> drivers. This patch simplifies the userspace application development.
>> We will not have to traverse different firmware paths based on device
>> tree or ACPI baed kernels.
>>
>> No matter what flavor of kernel is used, objects will be represented as
>> platform devices.
>>
>> The new layout is as follows:
>>
>> hidmam_10: hidma-mgmt at 0x5A000000 {
>> compatible = "qcom,hidma-mgmt-1.0";
>> ...
>>
>> hidma_10: hidma at 0x5a010000 {
>> compatible = "qcom,hidma-1.0";
>> ...
>> }
>> }
>>
>> The hidma_mgmt_init detects each instance of the hidma-mgmt-1.0 objects
>> in device tree and calls into the channel driver to create platform devices
>> for each child of the management object.
>>
>> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
>
>
>> +What: /sys/devices/platform/hidma-*/chid
>> + /sys/devices/platform/QCOM8061:*/chid
>> +Date: Dec 2015
>> +KernelVersion: 4.4
>> +Contact: "Sinan Kaya <okaya@cudeaurora.org>"
>> +Description:
>> + Contains the ID of the channel within the HIDMA instance.
>> + It is used to associate a given HIDMA channel with the
>> + priority and weight calls in the management interface.
>
>> -module_platform_driver(hidma_mgmt_driver);
>> +#ifdef CONFIG_OF
>> +static int object_counter;
>> +
>> +static int __init hidma_mgmt_of_populate_channels(struct device_node *np)
>> +{
>> + struct platform_device *pdev_parent = of_find_device_by_node(np);
>> + struct platform_device_info pdevinfo;
>> + struct of_phandle_args out_irq;
>> + struct device_node *child;
>> + struct resource *res;
>> + const __be32 *cell;
>
> Always BE ?
Yes, as Timur indicated device tree is big endian all the time.
>
>> + int ret = 0, size, i, num;
>> + u64 addr, addr_size;
>
> resource_size_t
These values are read from the device tree blob using of_read_number function. of_read_number
returns a u64.
>
>> +
>> + for_each_available_child_of_node(np, child) {
>> + int iter = 0;
>> +
>> + cell = of_get_property(child, "reg", &size);
>> + if (!cell) {
>> + ret = -EINVAL;
>> + goto out;
>> + }
>> +
>> + size /= (sizeof(*cell));
>
> Redundant parens. I think it might be good to use common sense for
> operator precedence, here is a radical example of ignoring it. And
> this is not the first case.
Removed. Note that I copied most of this function from another driver.
>
>> + num = size /
>> + (of_n_addr_cells(child) + of_n_size_cells(child)) + 1;
>> +
>> + /* allocate a resource array */
>> + res = kcalloc(num, sizeof(*res), GFP_KERNEL);
>> + if (!res) {
>> + ret = -ENOMEM;
>> + goto out;
>> + }
>> +
>> + /* read each reg value */
>> + i = 0;
>> + while (i < size) {
>> + addr = of_read_number(&cell[i],
>> + of_n_addr_cells(child));
>> + i += of_n_addr_cells(child);
>> +
>> + addr_size = of_read_number(&cell[i],
>> + of_n_size_cells(child));
>> + i += of_n_size_cells(child);
>> +
>> + res[iter].start = addr;
>> + res[iter].end = res[iter].start + addr_size - 1;
>> + res[iter].flags = IORESOURCE_MEM;
>
> res->start = ?
> ?
> res++;
ok
>
>> + iter++;
>> + }
>> +
>> + ret = of_irq_parse_one(child, 0, &out_irq);
>> + if (ret)
>> + goto out;
>> +
>> + res[iter].start = irq_create_of_mapping(&out_irq);
>> + res[iter].name = "hidma event irq";
>> + res[iter].flags = IORESOURCE_IRQ;
>
> Ditto.
ok
>
>> +
>> + pdevinfo.fwnode = &child->fwnode;
>> + pdevinfo.parent = pdev_parent ? &pdev_parent->dev : NULL;
>> + pdevinfo.name = child->name;
>> + pdevinfo.id = object_counter++;
>> + pdevinfo.res = res;
>> + pdevinfo.num_res = num;
>> + pdevinfo.data = NULL;
>> + pdevinfo.size_data = 0;
>> + pdevinfo.dma_mask = DMA_BIT_MASK(64);
>> + platform_device_register_full(&pdevinfo);
>> +
>> + kfree(res);
>> + res = NULL;
>> + }
>> +out:
>
>> + kfree(res);
>
>
>> +
>> + return ret;
>> +}
>> +#endif
>> +
>> +static int __init hidma_mgmt_init(void)
>> +{
>> +#ifdef CONFIG_OF
>> + struct device_node *child;
>> +
>> + for (child = of_find_matching_node(NULL, hidma_mgmt_match); child;
>> + child = of_find_matching_node(child, hidma_mgmt_match)) {
>> + /* device tree based firmware here */
>> + hidma_mgmt_of_populate_channels(child);
>> + of_node_put(child);
>> + }
>
> And why this is can't be done in probe of parent node driver?
The populate function creates platform objects using platform_device_register_full function above.
The hidma device driver later probes the object during object enumeration phase.
I tried moving platform_device_register_full into the probe context. The objects got generated but hidma
device driver didn't probe the object. I suppose we are required to create the objects before the probing starts.
I copied this pattern from another driver.
>
>> +#endif
>> + platform_driver_register(&hidma_mgmt_driver);
>> +
>> + return 0;
>> +}
>> +module_init(hidma_mgmt_init);
>
--
Sinan Kaya
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 35+ messages in thread