From: Aleksei Mamlin <mamlinav-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> To: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org, Aleksei Mamlin <mamlinav-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Subject: [PATCH 4/4] ARM: dts: sun7i: Add PA gpio pin to Wexler TAB7200 tablet Date: Fri, 18 Dec 2015 11:52:45 +0300 [thread overview] Message-ID: <1450428765-5779-1-git-send-email-mamlinav@gmail.com> (raw) In-Reply-To: <1450428591-5597-1-git-send-email-mamlinav-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Add PA gpio pin for controlling power of two external amplifiers (NS4890) which are used on the Wexler TAB7200 tablet Signed-off-by: Aleksei Mamlin <mamlinav-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> --- arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts index f47e5f1..2f6b21a 100644 --- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts @@ -74,6 +74,9 @@ }; &codec { + pinctrl-names = "default"; + pinctrl-0 = <&codec_pa_pin>; + allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ status = "okay"; }; @@ -176,6 +179,13 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + codec_pa_pin: codec_pa_pin@0 { + allwinner,pins = "PH15"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + ts_reset_pin: ts_reset_pin@0 { allwinner,pins = "PB13"; allwinner,function = "gpio_out"; -- 2.4.10
WARNING: multiple messages have this Message-ID (diff)
From: mamlinav@gmail.com (Aleksei Mamlin) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 4/4] ARM: dts: sun7i: Add PA gpio pin to Wexler TAB7200 tablet Date: Fri, 18 Dec 2015 11:52:45 +0300 [thread overview] Message-ID: <1450428765-5779-1-git-send-email-mamlinav@gmail.com> (raw) In-Reply-To: <1450428591-5597-1-git-send-email-mamlinav@gmail.com> Add PA gpio pin for controlling power of two external amplifiers (NS4890) which are used on the Wexler TAB7200 tablet Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> --- arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts index f47e5f1..2f6b21a 100644 --- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts @@ -74,6 +74,9 @@ }; &codec { + pinctrl-names = "default"; + pinctrl-0 = <&codec_pa_pin>; + allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ status = "okay"; }; @@ -176,6 +179,13 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + codec_pa_pin: codec_pa_pin at 0 { + allwinner,pins = "PH15"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + ts_reset_pin: ts_reset_pin at 0 { allwinner,pins = "PB13"; allwinner,function = "gpio_out"; -- 2.4.10
next prev parent reply other threads:[~2015-12-18 8:52 UTC|newest] Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-12-18 8:49 [PATCH 0/4] ARM: dts: sun7i: Devicetree improvements for the Wexler TAB7200 Aleksei Mamlin 2015-12-18 8:49 ` Aleksei Mamlin [not found] ` <1450428591-5597-1-git-send-email-mamlinav-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2015-12-18 8:51 ` [PATCH 1/4] ARM: dts: sun7i: Enable touchscreen on Wexler TAB7200 tablet Aleksei Mamlin 2015-12-18 8:51 ` Aleksei Mamlin [not found] ` <1450428710-5653-1-git-send-email-mamlinav-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2015-12-18 21:25 ` Maxime Ripard 2015-12-18 21:25 ` Maxime Ripard 2015-12-19 15:11 ` Aleksei Mamlin [not found] ` <CAF==cZWcY=FH9Sr8RY4j4Ob8iuiYrBGkajZDWpNQzS-t4d074Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2015-12-21 15:43 ` Maxime Ripard 2015-12-21 15:43 ` Maxime Ripard 2015-12-19 15:49 ` [linux-sunxi] " Karsten Merker 2015-12-21 15:44 ` Maxime Ripard 2015-12-21 15:44 ` Maxime Ripard 2015-12-18 8:52 ` [PATCH 2/4] ARM: dts: sun7i: Enable PWM controller " Aleksei Mamlin 2015-12-18 8:52 ` Aleksei Mamlin [not found] ` <1450428728-5695-1-git-send-email-mamlinav-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2015-12-18 21:25 ` Maxime Ripard 2015-12-18 21:25 ` Maxime Ripard 2015-12-18 8:52 ` [PATCH 3/4] ARM: dts: sun7i: Add backlight node to " Aleksei Mamlin 2015-12-18 8:52 ` Aleksei Mamlin [not found] ` <1450428742-5737-1-git-send-email-mamlinav-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2015-12-18 21:27 ` Maxime Ripard 2015-12-18 21:27 ` Maxime Ripard 2015-12-21 15:45 ` Maxime Ripard 2015-12-21 15:45 ` Maxime Ripard 2015-12-18 8:52 ` Aleksei Mamlin [this message] 2015-12-18 8:52 ` [PATCH 4/4] ARM: dts: sun7i: Add PA gpio pin " Aleksei Mamlin [not found] ` <1450428765-5779-1-git-send-email-mamlinav-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2015-12-21 15:45 ` Maxime Ripard 2015-12-21 15:45 ` Maxime Ripard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1450428765-5779-1-git-send-email-mamlinav@gmail.com \ --to=mamlinav-re5jqeeqqe8avxtiumwx3w@public.gmane.org \ --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \ --cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.