* [U-Boot] [PATCH v2 1/2] m68k: add malloc memory for early malloc
@ 2015-12-20 15:54 Angelo Dureghello
2015-12-20 15:54 ` [U-Boot] [PATCH v2 2/2] m68k: add DM model serial driver Angelo Dureghello
2015-12-28 4:22 ` [U-Boot] [PATCH v2 1/2] m68k: add malloc memory for early malloc Simon Glass
0 siblings, 2 replies; 10+ messages in thread
From: Angelo Dureghello @ 2015-12-20 15:54 UTC (permalink / raw)
To: u-boot
To use serial uclass and DM, CONFIG_SYS_MALLOC_F must be used.
So CONFIG_SYS_GENERIC_GLOBAL_DATA has been undefined and
call to board_init_f_mem() is added for all cpu's.
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
---
Changes in v2: None
arch/m68k/cpu/mcf5227x/start.S | 8 ++++++++
arch/m68k/cpu/mcf523x/start.S | 8 ++++++++
arch/m68k/cpu/mcf52x2/start.S | 8 ++++++++
arch/m68k/cpu/mcf530x/cpu_init.c | 2 +-
arch/m68k/cpu/mcf530x/start.S | 8 ++++++++
arch/m68k/cpu/mcf532x/start.S | 8 ++++++++
arch/m68k/cpu/mcf5445x/start.S | 8 ++++++++
arch/m68k/cpu/mcf547x_8x/start.S | 8 ++++++++
arch/m68k/include/asm/config.h | 2 --
9 files changed, 57 insertions(+), 3 deletions(-)
diff --git a/arch/m68k/cpu/mcf5227x/start.S b/arch/m68k/cpu/mcf5227x/start.S
index 23024f9..bcb5611 100644
--- a/arch/m68k/cpu/mcf5227x/start.S
+++ b/arch/m68k/cpu/mcf5227x/start.S
@@ -379,6 +379,14 @@ _start:
move.l #__got_start, %a5 /* put relocation table address to a5 */
+ /* Allocate and zero GD, update SP */
+ move.l %sp,-(%sp)
+ bsr board_init_f_mem
+
+ /* Update stack- and frame-pointers */
+ move.l %d0, %sp
+ move.l %sp, %fp
+
bsr cpu_init_f /* run low-level CPU init code (from flash) */
bsr board_init_f /* run low-level board init code (from flash) */
diff --git a/arch/m68k/cpu/mcf523x/start.S b/arch/m68k/cpu/mcf523x/start.S
index 8a23e72..14b3025 100644
--- a/arch/m68k/cpu/mcf523x/start.S
+++ b/arch/m68k/cpu/mcf523x/start.S
@@ -141,6 +141,14 @@ _start:
move.l #__got_start, %a5 /* put relocation table address to a5 */
+ /* Allocate and zero GD, update SP */
+ move.l %sp,-(%sp)
+ bsr board_init_f_mem
+
+ /* Update stack- and frame-pointers */
+ move.l %d0, %sp
+ move.l %sp, %fp
+
bsr cpu_init_f /* run low-level CPU init code (from flash) */
bsr board_init_f /* run low-level board init code (from flash) */
diff --git a/arch/m68k/cpu/mcf52x2/start.S b/arch/m68k/cpu/mcf52x2/start.S
index 8a59496..abb9291 100644
--- a/arch/m68k/cpu/mcf52x2/start.S
+++ b/arch/m68k/cpu/mcf52x2/start.S
@@ -198,6 +198,14 @@ _after_flashbar_copy:
move.l #__got_start, %a5 /* put relocation table address to a5 */
+ /* Allocate and zero GD, update SP */
+ move.l %sp,-(%sp)
+ bsr board_init_f_mem
+
+ /* Update stack- and frame-pointers */
+ move.l %d0, %sp
+ move.l %sp, %fp
+
bsr cpu_init_f /* run low-level CPU init code (from flash) */
bsr board_init_f /* run low-level board init code (from flash) */
diff --git a/arch/m68k/cpu/mcf530x/cpu_init.c b/arch/m68k/cpu/mcf530x/cpu_init.c
index 80dc239..b09eed8 100644
--- a/arch/m68k/cpu/mcf530x/cpu_init.c
+++ b/arch/m68k/cpu/mcf530x/cpu_init.c
@@ -142,7 +142,7 @@ int cpu_init_r(void)
return 0;
}
-void uart_port_conf(void)
+void uart_port_conf(int port)
{
}
diff --git a/arch/m68k/cpu/mcf530x/start.S b/arch/m68k/cpu/mcf530x/start.S
index 097958a..d9034e1 100644
--- a/arch/m68k/cpu/mcf530x/start.S
+++ b/arch/m68k/cpu/mcf530x/start.S
@@ -137,6 +137,14 @@ _start:
/* put relocation table address to a5 */
move.l #__got_start, %a5
+ /* Allocate and zero GD, update SP */
+ move.l %sp,-(%sp)
+ bsr board_init_f_mem
+
+ /* Update stack- and frame-pointers */
+ move.l %d0, %sp
+ move.l %sp, %fp
+
/* run low-level CPU init code (from flash) */
bsr cpu_init_f
diff --git a/arch/m68k/cpu/mcf532x/start.S b/arch/m68k/cpu/mcf532x/start.S
index 3b9ede0..98a5401 100644
--- a/arch/m68k/cpu/mcf532x/start.S
+++ b/arch/m68k/cpu/mcf532x/start.S
@@ -155,6 +155,14 @@ _start:
move.l #__got_start, %a5 /* put relocation table address to a5 */
+ /* Allocate and zero GD, update SP */
+ move.l %sp,-(%sp)
+ bsr board_init_f_mem
+
+ /* Update stack- and frame-pointers */
+ move.l %d0, %sp
+ move.l %sp, %fp
+
bsr cpu_init_f /* run low-level CPU init code (from flash) */
bsr board_init_f /* run low-level board init code (from flash) */
diff --git a/arch/m68k/cpu/mcf5445x/start.S b/arch/m68k/cpu/mcf5445x/start.S
index 979eb5a..340ab84 100644
--- a/arch/m68k/cpu/mcf5445x/start.S
+++ b/arch/m68k/cpu/mcf5445x/start.S
@@ -664,6 +664,14 @@ _start:
move.l #__got_start, %a5 /* put relocation table address to a5 */
+ /* Allocate and zero GD, update SP */
+ move.l %sp,-(%sp)
+ bsr board_init_f_mem
+
+ /* Update stack- and frame-pointers */
+ move.l %d0, %sp
+ move.l %sp, %fp
+
bsr cpu_init_f /* run low-level CPU init code (from flash) */
bsr board_init_f /* run low-level board init code (from flash) */
diff --git a/arch/m68k/cpu/mcf547x_8x/start.S b/arch/m68k/cpu/mcf547x_8x/start.S
index 75de22d..0468d1a 100644
--- a/arch/m68k/cpu/mcf547x_8x/start.S
+++ b/arch/m68k/cpu/mcf547x_8x/start.S
@@ -148,6 +148,14 @@ _start:
move.l #__got_start, %a5 /* put relocation table address to a5 */
+ /* Allocate and zero GD, update SP */
+ move.l %sp,-(%sp)
+ bsr board_init_f_mem
+
+ /* Update stack- and frame-pointers */
+ move.l %d0, %sp
+ move.l %sp, %fp
+
jbsr cpu_init_f /* run low-level CPU init code (from flash) */
jbsr board_init_f /* run low-level board init code (from flash) */
diff --git a/arch/m68k/include/asm/config.h b/arch/m68k/include/asm/config.h
index e1458ac..9c4d3fb 100644
--- a/arch/m68k/include/asm/config.h
+++ b/arch/m68k/include/asm/config.h
@@ -7,8 +7,6 @@
#ifndef _ASM_CONFIG_H_
#define _ASM_CONFIG_H_
-#define CONFIG_SYS_GENERIC_GLOBAL_DATA
-
#define CONFIG_NEEDS_MANUAL_RELOC
#define CONFIG_LMB
--
2.5.3
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH v2 2/2] m68k: add DM model serial driver
2015-12-20 15:54 [U-Boot] [PATCH v2 1/2] m68k: add malloc memory for early malloc Angelo Dureghello
@ 2015-12-20 15:54 ` Angelo Dureghello
2015-12-28 4:22 ` Simon Glass
2015-12-28 4:22 ` [U-Boot] [PATCH v2 1/2] m68k: add malloc memory for early malloc Simon Glass
1 sibling, 1 reply; 10+ messages in thread
From: Angelo Dureghello @ 2015-12-20 15:54 UTC (permalink / raw)
To: u-boot
Boards can now use DM serial driver, or still legacy mcf uart
driver version.
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
---
Changes in v2:
- remove while loops in putc and getc, replacing with return -EAGAIN
- remove unneeded ifdef
drivers/serial/mcfuart.c | 188 ++++++++++++++++++++++-------
include/dm/platform_data/serial_coldfire.h | 23 ++++
2 files changed, 167 insertions(+), 44 deletions(-)
create mode 100644 include/dm/platform_data/serial_coldfire.h
diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c
index 407354f..059cb0f 100644
--- a/drivers/serial/mcfuart.c
+++ b/drivers/serial/mcfuart.c
@@ -2,6 +2,9 @@
* (C) Copyright 2004-2007 Freescale Semiconductor, Inc.
* TsiChung Liew, Tsi-Chung.Liew at freescale.com.
*
+ * Modified to add device model (DM) support
+ * (C) Copyright 2015 Angelo Dureghello <angelo@sysam.it>
+ *
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -11,9 +14,10 @@
*/
#include <common.h>
+#include <dm.h>
+#include <dm/platform_data/serial_coldfire.h>
#include <serial.h>
#include <linux/compiler.h>
-
#include <asm/immap.h>
#include <asm/uart.h>
@@ -21,91 +25,110 @@ DECLARE_GLOBAL_DATA_PTR;
extern void uart_port_conf(int port);
-static int mcf_serial_init(void)
+static int mcf_serial_init_common(uart_t *uart, int port_idx, int baudrate)
{
- volatile uart_t *uart;
u32 counter;
- uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
-
- uart_port_conf(CONFIG_SYS_UART_PORT);
+ uart_port_conf(port_idx);
/* write to SICR: SIM2 = uart mode,dcd does not affect rx */
- uart->ucr = UART_UCR_RESET_RX;
- uart->ucr = UART_UCR_RESET_TX;
- uart->ucr = UART_UCR_RESET_ERROR;
- uart->ucr = UART_UCR_RESET_MR;
+ writeb(UART_UCR_RESET_RX, &uart->ucr);
+ writeb(UART_UCR_RESET_TX, &uart->ucr);
+ writeb(UART_UCR_RESET_ERROR, &uart->ucr);
+ writeb(UART_UCR_RESET_MR, &uart->ucr);
__asm__("nop");
- uart->uimr = 0;
+ writeb(0, &uart->uimr);
/* write to CSR: RX/TX baud rate from timers */
- uart->ucsr = (UART_UCSR_RCS_SYS_CLK | UART_UCSR_TCS_SYS_CLK);
+ writeb(UART_UCSR_RCS_SYS_CLK | UART_UCSR_TCS_SYS_CLK, &uart->ucsr);
- uart->umr = (UART_UMR_BC_8 | UART_UMR_PM_NONE);
- uart->umr = UART_UMR_SB_STOP_BITS_1;
+ writeb(UART_UMR_BC_8 | UART_UMR_PM_NONE, &uart->umr);
+ writeb(UART_UMR_SB_STOP_BITS_1, &uart->umr);
/* Setting up BaudRate */
- counter = (u32) ((gd->bus_clk / 32) + (gd->baudrate / 2));
- counter = counter / gd->baudrate;
+ counter = (u32) ((gd->bus_clk / 32) + (baudrate / 2));
+ counter = counter / baudrate;
/* write to CTUR: divide counter upper byte */
- uart->ubg1 = (u8) ((counter & 0xff00) >> 8);
+ writeb((u8)((counter & 0xff00) >> 8), &uart->ubg1);
/* write to CTLR: divide counter lower byte */
- uart->ubg2 = (u8) (counter & 0x00ff);
+ writeb((u8)(counter & 0x00ff), &uart->ubg2);
- uart->ucr = (UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED);
+ writeb(UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED, &uart->ucr);
return (0);
}
+static void mcf_serial_setbrg_common(uart_t *uart, int baudrate)
+{
+ u32 counter;
+
+ /* Setting up BaudRate */
+ counter = (u32) ((gd->bus_clk / 32) + (baudrate / 2));
+ counter = counter / baudrate;
+
+ /* write to CTUR: divide counter upper byte */
+ writeb(((counter & 0xff00) >> 8), &uart->ubg1);
+ /* write to CTLR: divide counter lower byte */
+ writeb((counter & 0x00ff), &uart->ubg2);
+
+ writeb(UART_UCR_RESET_RX, &uart->ucr);
+ writeb(UART_UCR_RESET_TX, &uart->ucr);
+
+ writeb(UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED, &uart->ucr);
+}
+
+#ifndef CONFIG_DM_SERIAL
+
+static int mcf_serial_init(void)
+{
+ uart_t *uart_base;
+ int port_idx;
+
+ uart_base = (uart_t *)CONFIG_SYS_UART_BASE;
+ port_idx = CONFIG_SYS_UART_PORT;
+
+ return mcf_serial_init_common(uart_base, port_idx, gd->baudrate);
+}
+
static void mcf_serial_putc(const char c)
{
- volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
+ uart_t *uart = (uart_t *)CONFIG_SYS_UART_BASE;
if (c == '\n')
serial_putc('\r');
/* Wait for last character to go. */
- while (!(uart->usr & UART_USR_TXRDY)) ;
+ while (!(readb(&uart->usr) & UART_USR_TXRDY))
+ ;
- uart->utb = c;
+ writeb(c, &uart->utb);
}
static int mcf_serial_getc(void)
{
- volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
+ uart_t *uart = (uart_t *)CONFIG_SYS_UART_BASE;
/* Wait for a character to arrive. */
- while (!(uart->usr & UART_USR_RXRDY)) ;
- return uart->urb;
-}
-
-static int mcf_serial_tstc(void)
-{
- volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
+ while (!(readb(&uart->usr) & UART_USR_RXRDY))
+ ;
- return (uart->usr & UART_USR_RXRDY);
+ return readb(&uart->urb);
}
static void mcf_serial_setbrg(void)
{
- volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
- u32 counter;
-
- /* Setting up BaudRate */
- counter = (u32) ((gd->bus_clk / 32) + (gd->baudrate / 2));
- counter = counter / gd->baudrate;
+ uart_t *uart = (uart_t *)CONFIG_SYS_UART_BASE;
- /* write to CTUR: divide counter upper byte */
- uart->ubg1 = ((counter & 0xff00) >> 8);
- /* write to CTLR: divide counter lower byte */
- uart->ubg2 = (counter & 0x00ff);
+ mcf_serial_setbrg_common(uart, gd->baudrate);
+}
- uart->ucr = UART_UCR_RESET_RX;
- uart->ucr = UART_UCR_RESET_TX;
+static int mcf_serial_tstc(void)
+{
+ uart_t *uart = (uart_t *)CONFIG_SYS_UART_BASE;
- uart->ucr = UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED;
+ return readb(&uart->usr) & UART_USR_RXRDY;
}
static struct serial_device mcf_serial_drv = {
@@ -128,3 +151,80 @@ __weak struct serial_device *default_serial_console(void)
{
return &mcf_serial_drv;
}
+
+#endif
+
+#ifdef CONFIG_DM_SERIAL
+
+static int coldfire_serial_probe(struct udevice *dev)
+{
+ struct coldfire_serial_platdata *plat = dev->platdata;
+
+ return mcf_serial_init_common((uart_t *)plat->base,
+ plat->port, plat->baudrate);
+}
+
+static int coldfire_serial_putc(struct udevice *dev, const char ch)
+{
+ struct coldfire_serial_platdata *plat = dev->platdata;
+ uart_t *uart = (uart_t *)plat->base;
+
+ /* Wait for last character to go. */
+ if (!(readb(&uart->usr) & UART_USR_TXRDY))
+ return -EAGAIN;
+
+ writeb(ch, &uart->utb);
+
+ return 0;
+}
+
+static int coldfire_serial_getc(struct udevice *dev)
+{
+ struct coldfire_serial_platdata *plat = dev->platdata;
+ uart_t *uart = (uart_t *)(plat->base);
+
+ /* Wait for a character to arrive. */
+ if (!(readb(&uart->usr) & UART_USR_RXRDY))
+ return -EAGAIN;
+
+ return readb(&uart->urb);
+}
+
+int coldfire_serial_setbrg(struct udevice *dev, int baudrate)
+{
+ struct coldfire_serial_platdata *plat = dev->platdata;
+ uart_t *uart = (uart_t *)(plat->base);
+
+ mcf_serial_setbrg_common(uart, baudrate);
+
+ return 0;
+}
+
+static int coldfire_serial_pending(struct udevice *dev, bool input)
+{
+ struct coldfire_serial_platdata *plat = dev->platdata;
+ uart_t *uart = (uart_t *)(plat->base);
+
+ if (input)
+ return readb(&uart->usr) & UART_USR_RXRDY ? 1 : 0;
+ else
+ return readb(&uart->usr) & UART_USR_TXRDY ? 0 : 1;
+
+ return 0;
+}
+
+static const struct dm_serial_ops coldfire_serial_ops = {
+ .putc = coldfire_serial_putc,
+ .pending = coldfire_serial_pending,
+ .getc = coldfire_serial_getc,
+ .setbrg = coldfire_serial_setbrg,
+};
+
+U_BOOT_DRIVER(serial_coldfire) = {
+ .name = "serial_coldfire",
+ .id = UCLASS_SERIAL,
+ .probe = coldfire_serial_probe,
+ .ops = &coldfire_serial_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
+#endif
diff --git a/include/dm/platform_data/serial_coldfire.h b/include/dm/platform_data/serial_coldfire.h
new file mode 100644
index 0000000..fc1ad71
--- /dev/null
+++ b/include/dm/platform_data/serial_coldfire.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2015 Angelo Dureghello <angelo@sysam.it>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __serial_coldfire_h
+#define __serial_coldfire_h
+
+/*
+ * struct coldfire_serial_platdata - information about a coldfire port
+ *
+ * @base: Uart port base register address
+ * @port: Uart port index, for cpu with pinmux for uart / gpio
+ * baudrtatre: Uart port baudrate
+ */
+struct coldfire_serial_platdata {
+ unsigned long base;
+ int port;
+ int baudrate;
+};
+
+#endif /* __serial_coldfire_h */
--
2.5.3
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH v2 1/2] m68k: add malloc memory for early malloc
2015-12-20 15:54 [U-Boot] [PATCH v2 1/2] m68k: add malloc memory for early malloc Angelo Dureghello
2015-12-20 15:54 ` [U-Boot] [PATCH v2 2/2] m68k: add DM model serial driver Angelo Dureghello
@ 2015-12-28 4:22 ` Simon Glass
2016-04-15 14:14 ` Simon Glass
1 sibling, 1 reply; 10+ messages in thread
From: Simon Glass @ 2015-12-28 4:22 UTC (permalink / raw)
To: u-boot
On 20 December 2015 at 08:54, Angelo Dureghello <angelo@sysam.it> wrote:
> To use serial uclass and DM, CONFIG_SYS_MALLOC_F must be used.
> So CONFIG_SYS_GENERIC_GLOBAL_DATA has been undefined and
> call to board_init_f_mem() is added for all cpu's.
>
> Signed-off-by: Angelo Dureghello <angelo@sysam.it>
>
> ---
>
> Changes in v2: None
>
> arch/m68k/cpu/mcf5227x/start.S | 8 ++++++++
> arch/m68k/cpu/mcf523x/start.S | 8 ++++++++
> arch/m68k/cpu/mcf52x2/start.S | 8 ++++++++
> arch/m68k/cpu/mcf530x/cpu_init.c | 2 +-
> arch/m68k/cpu/mcf530x/start.S | 8 ++++++++
> arch/m68k/cpu/mcf532x/start.S | 8 ++++++++
> arch/m68k/cpu/mcf5445x/start.S | 8 ++++++++
> arch/m68k/cpu/mcf547x_8x/start.S | 8 ++++++++
> arch/m68k/include/asm/config.h | 2 --
> 9 files changed, 57 insertions(+), 3 deletions(-)
Reviewed-by: Simon Glass <sjg@chromium.org>
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH v2 2/2] m68k: add DM model serial driver
2015-12-20 15:54 ` [U-Boot] [PATCH v2 2/2] m68k: add DM model serial driver Angelo Dureghello
@ 2015-12-28 4:22 ` Simon Glass
0 siblings, 0 replies; 10+ messages in thread
From: Simon Glass @ 2015-12-28 4:22 UTC (permalink / raw)
To: u-boot
On 20 December 2015 at 08:54, Angelo Dureghello <angelo@sysam.it> wrote:
> Boards can now use DM serial driver, or still legacy mcf uart
> driver version.
>
> Signed-off-by: Angelo Dureghello <angelo@sysam.it>
>
> ---
>
> Changes in v2:
> - remove while loops in putc and getc, replacing with return -EAGAIN
> - remove unneeded ifdef
>
> drivers/serial/mcfuart.c | 188 ++++++++++++++++++++++-------
> include/dm/platform_data/serial_coldfire.h | 23 ++++
> 2 files changed, 167 insertions(+), 44 deletions(-)
> create mode 100644 include/dm/platform_data/serial_coldfire.h
Reviewed-by: Simon Glass <sjg@chromium.org>
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH v2 1/2] m68k: add malloc memory for early malloc
2015-12-28 4:22 ` [U-Boot] [PATCH v2 1/2] m68k: add malloc memory for early malloc Simon Glass
@ 2016-04-15 14:14 ` Simon Glass
2016-04-15 14:42 ` Angelo Dureghello
0 siblings, 1 reply; 10+ messages in thread
From: Simon Glass @ 2016-04-15 14:14 UTC (permalink / raw)
To: u-boot
Hi Angelo,
On 27 December 2015 at 21:22, Simon Glass <sjg@chromium.org> wrote:
> On 20 December 2015 at 08:54, Angelo Dureghello <angelo@sysam.it> wrote:
>> To use serial uclass and DM, CONFIG_SYS_MALLOC_F must be used.
>> So CONFIG_SYS_GENERIC_GLOBAL_DATA has been undefined and
>> call to board_init_f_mem() is added for all cpu's.
>>
>> Signed-off-by: Angelo Dureghello <angelo@sysam.it>
>>
>> ---
>>
>> Changes in v2: None
>>
>> arch/m68k/cpu/mcf5227x/start.S | 8 ++++++++
>> arch/m68k/cpu/mcf523x/start.S | 8 ++++++++
>> arch/m68k/cpu/mcf52x2/start.S | 8 ++++++++
>> arch/m68k/cpu/mcf530x/cpu_init.c | 2 +-
>> arch/m68k/cpu/mcf530x/start.S | 8 ++++++++
>> arch/m68k/cpu/mcf532x/start.S | 8 ++++++++
>> arch/m68k/cpu/mcf5445x/start.S | 8 ++++++++
>> arch/m68k/cpu/mcf547x_8x/start.S | 8 ++++++++
>> arch/m68k/include/asm/config.h | 2 --
>> 9 files changed, 57 insertions(+), 3 deletions(-)
>
> Reviewed-by: Simon Glass <sjg@chromium.org>
Unfortunately this breaks a lot of boards so I cannot apply it:
22: m68k: add malloc memory for early malloc
m68k: + M5475FFE M5475GFE M5485AFE M5475BFE M52277EVB
M5485FFE M54451EVB M54418TWR_nand_rmii M54418TWR_serial_mii M5475EFE
M5485CFE M54451EVB_stmicro M5485BFE M5485HFE M54418TWR_serial_rmii
M5475DFE M52277EVB_stmicro M5475AFE M5485GFE M54418TWR_nand_mii
eb_cpu5282_internal amcore M53017EVB M54418TWR_nand_rmii_lowfreq
M54418TWR M5475CFE M5485EFE M5485DFE eb_cpu5282
+arch/m68k/cpu/mcf547x_8x/start.o: In function `_start':
+build/../arch/m68k/cpu/mcf547x_8x/start.S:153: undefined reference to
`board_init_f_mem'
+build/../arch/m68k/cpu/mcf547x_8x/start.S:153:(.text+0x470):
relocation truncated to fit: R_68K_PC16 against undefined symbol
`board_init_f_mem'
+make[1]: *** [u-boot] Error 1
+make: *** [sub-make] Error 2
+arch/m68k/cpu/mcf5227x/start.o: In function `_start':
+build/../arch/m68k/cpu/mcf5227x/start.S:384: undefined reference to
`board_init_f_mem'
+arch/m68k/cpu/mcf5445x/start.o: In function `_start':
+build/../arch/m68k/cpu/mcf5445x/start.S:669: undefined reference to
`board_init_f_mem'
+build/../arch/m68k/cpu/mcf5445x/start.S:669:(.text+0x41c): relocation
truncated to fit: R_68K_PC16 against undefined symbol
`board_init_f_mem'
+build/../arch/m68k/cpu/mcf5227x/start.S:384:(.text+0x44a): relocation
truncated to fit: R_68K_PC16 against undefined symbol
`board_init_f_mem'
+arch/m68k/cpu/mcf52x2/start.o: In function `_after_flashbar_copy':
+build/../arch/m68k/cpu/mcf52x2/start.S:203: undefined reference to
`board_init_f_mem'
+build/../arch/m68k/cpu/mcf52x2/start.S:203:(.text+0x494): relocation
truncated to fit: R_68K_PC16 against undefined symbol
`board_init_f_mem'
+arch/m68k/cpu/mcf530x/start.o: In function `_start':
+build/../arch/m68k/cpu/mcf530x/start.S:142: undefined reference to
`board_init_f_mem'
+build/../arch/m68k/cpu/mcf530x/start.S:142:(.text+0x45e): relocation
truncated to fit: R_68K_PC16 against undefined symbol
`board_init_f_mem'
+arch/m68k/cpu/mcf532x/start.o: In function `_start':
+build/../arch/m68k/cpu/mcf532x/start.S:160: undefined reference to
`board_init_f_mem'
+arch/m68k/cpu/mcf52x2/start.o: In function `_start':
+build/../arch/m68k/cpu/mcf52x2/start.S:203:(.text+0x456): relocation
truncated to fit: R_68K_PC16 against undefined symbol
`board_init_f_mem'
Regards,
Simon
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH v2 1/2] m68k: add malloc memory for early malloc
2016-04-15 14:14 ` Simon Glass
@ 2016-04-15 14:42 ` Angelo Dureghello
2016-04-15 15:23 ` Simon Glass
0 siblings, 1 reply; 10+ messages in thread
From: Angelo Dureghello @ 2016-04-15 14:42 UTC (permalink / raw)
To: u-boot
Hi Simon,
On 15/04/2016 16:14, Simon Glass wrote:
> Hi Angelo,
>
> On 27 December 2015 at 21:22, Simon Glass <sjg@chromium.org> wrote:
>> On 20 December 2015 at 08:54, Angelo Dureghello <angelo@sysam.it> wrote:
>>> To use serial uclass and DM, CONFIG_SYS_MALLOC_F must be used.
>>> So CONFIG_SYS_GENERIC_GLOBAL_DATA has been undefined and
>>> call to board_init_f_mem() is added for all cpu's.
>>>
>>> Signed-off-by: Angelo Dureghello <angelo@sysam.it>
>>>
>>> ---
>>>
>>> Changes in v2: None
>>>
>>> arch/m68k/cpu/mcf5227x/start.S | 8 ++++++++
>>> arch/m68k/cpu/mcf523x/start.S | 8 ++++++++
>>> arch/m68k/cpu/mcf52x2/start.S | 8 ++++++++
>>> arch/m68k/cpu/mcf530x/cpu_init.c | 2 +-
>>> arch/m68k/cpu/mcf530x/start.S | 8 ++++++++
>>> arch/m68k/cpu/mcf532x/start.S | 8 ++++++++
>>> arch/m68k/cpu/mcf5445x/start.S | 8 ++++++++
>>> arch/m68k/cpu/mcf547x_8x/start.S | 8 ++++++++
>>> arch/m68k/include/asm/config.h | 2 --
>>> 9 files changed, 57 insertions(+), 3 deletions(-)
>>
>> Reviewed-by: Simon Glass <sjg@chromium.org>
>
> Unfortunately this breaks a lot of boards so I cannot apply it:
>
> 22: m68k: add malloc memory for early malloc
> m68k: + M5475FFE M5475GFE M5485AFE M5475BFE M52277EVB
> M5485FFE M54451EVB M54418TWR_nand_rmii M54418TWR_serial_mii M5475EFE
> M5485CFE M54451EVB_stmicro M5485BFE M5485HFE M54418TWR_serial_rmii
> M5475DFE M52277EVB_stmicro M5475AFE M5485GFE M54418TWR_nand_mii
> eb_cpu5282_internal amcore M53017EVB M54418TWR_nand_rmii_lowfreq
> M54418TWR M5475CFE M5485EFE M5485DFE eb_cpu5282
> +arch/m68k/cpu/mcf547x_8x/start.o: In function `_start':
> +build/../arch/m68k/cpu/mcf547x_8x/start.S:153: undefined reference to
> `board_init_f_mem'
> +build/../arch/m68k/cpu/mcf547x_8x/start.S:153:(.text+0x470):
> relocation truncated to fit: R_68K_PC16 against undefined symbol
> `board_init_f_mem'
> +make[1]: *** [u-boot] Error 1
> +make: *** [sub-make] Error 2
> +arch/m68k/cpu/mcf5227x/start.o: In function `_start':
> +build/../arch/m68k/cpu/mcf5227x/start.S:384: undefined reference to
> `board_init_f_mem'
> +arch/m68k/cpu/mcf5445x/start.o: In function `_start':
> +build/../arch/m68k/cpu/mcf5445x/start.S:669: undefined reference to
> `board_init_f_mem'
> +build/../arch/m68k/cpu/mcf5445x/start.S:669:(.text+0x41c): relocation
> truncated to fit: R_68K_PC16 against undefined symbol
> `board_init_f_mem'
> +build/../arch/m68k/cpu/mcf5227x/start.S:384:(.text+0x44a): relocation
> truncated to fit: R_68K_PC16 against undefined symbol
> `board_init_f_mem'
> +arch/m68k/cpu/mcf52x2/start.o: In function `_after_flashbar_copy':
> +build/../arch/m68k/cpu/mcf52x2/start.S:203: undefined reference to
> `board_init_f_mem'
> +build/../arch/m68k/cpu/mcf52x2/start.S:203:(.text+0x494): relocation
> truncated to fit: R_68K_PC16 against undefined symbol
> `board_init_f_mem'
> +arch/m68k/cpu/mcf530x/start.o: In function `_start':
> +build/../arch/m68k/cpu/mcf530x/start.S:142: undefined reference to
> `board_init_f_mem'
> +build/../arch/m68k/cpu/mcf530x/start.S:142:(.text+0x45e): relocation
> truncated to fit: R_68K_PC16 against undefined symbol
> `board_init_f_mem'
> +arch/m68k/cpu/mcf532x/start.o: In function `_start':
> +build/../arch/m68k/cpu/mcf532x/start.S:160: undefined reference to
> `board_init_f_mem'
> +arch/m68k/cpu/mcf52x2/start.o: In function `_start':
> +build/../arch/m68k/cpu/mcf52x2/start.S:203:(.text+0x456): relocation
> truncated to fit: R_68K_PC16 against undefined symbol
> `board_init_f_mem'
>
Issue was not there at that submit time, now it seems due to growing of
u-boot size.
The "truncated to fit" issue is fixed with this patch.
https://patchwork.ozlabs.org/patch/609150/
So if you apply the above, and then this current, all should work.
Regards,
Angelo
> Regards,
> Simon
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH v2 1/2] m68k: add malloc memory for early malloc
2016-04-15 14:42 ` Angelo Dureghello
@ 2016-04-15 15:23 ` Simon Glass
2016-04-15 16:38 ` Angelo Dureghello
0 siblings, 1 reply; 10+ messages in thread
From: Simon Glass @ 2016-04-15 15:23 UTC (permalink / raw)
To: u-boot
Hi Angelo,
On 15 April 2016 at 08:42, Angelo Dureghello <angelo@sysam.it> wrote:
> Hi Simon,
>
>
> On 15/04/2016 16:14, Simon Glass wrote:
>>
>> Hi Angelo,
>>
>> On 27 December 2015 at 21:22, Simon Glass <sjg@chromium.org> wrote:
>>>
>>> On 20 December 2015 at 08:54, Angelo Dureghello <angelo@sysam.it> wrote:
>>>>
>>>> To use serial uclass and DM, CONFIG_SYS_MALLOC_F must be used.
>>>> So CONFIG_SYS_GENERIC_GLOBAL_DATA has been undefined and
>>>> call to board_init_f_mem() is added for all cpu's.
>>>>
>>>> Signed-off-by: Angelo Dureghello <angelo@sysam.it>
>>>>
>>>> ---
>>>>
>>>> Changes in v2: None
>>>>
>>>> arch/m68k/cpu/mcf5227x/start.S | 8 ++++++++
>>>> arch/m68k/cpu/mcf523x/start.S | 8 ++++++++
>>>> arch/m68k/cpu/mcf52x2/start.S | 8 ++++++++
>>>> arch/m68k/cpu/mcf530x/cpu_init.c | 2 +-
>>>> arch/m68k/cpu/mcf530x/start.S | 8 ++++++++
>>>> arch/m68k/cpu/mcf532x/start.S | 8 ++++++++
>>>> arch/m68k/cpu/mcf5445x/start.S | 8 ++++++++
>>>> arch/m68k/cpu/mcf547x_8x/start.S | 8 ++++++++
>>>> arch/m68k/include/asm/config.h | 2 --
>>>> 9 files changed, 57 insertions(+), 3 deletions(-)
>>>
>>>
>>> Reviewed-by: Simon Glass <sjg@chromium.org>
>>
>>
>> Unfortunately this breaks a lot of boards so I cannot apply it:
>>
>> 22: m68k: add malloc memory for early malloc
>> m68k: + M5475FFE M5475GFE M5485AFE M5475BFE M52277EVB
>> M5485FFE M54451EVB M54418TWR_nand_rmii M54418TWR_serial_mii M5475EFE
>> M5485CFE M54451EVB_stmicro M5485BFE M5485HFE M54418TWR_serial_rmii
>> M5475DFE M52277EVB_stmicro M5475AFE M5485GFE M54418TWR_nand_mii
>> eb_cpu5282_internal amcore M53017EVB M54418TWR_nand_rmii_lowfreq
>> M54418TWR M5475CFE M5485EFE M5485DFE eb_cpu5282
>> +arch/m68k/cpu/mcf547x_8x/start.o: In function `_start':
>> +build/../arch/m68k/cpu/mcf547x_8x/start.S:153: undefined reference to
>> `board_init_f_mem'
>> +build/../arch/m68k/cpu/mcf547x_8x/start.S:153:(.text+0x470):
>> relocation truncated to fit: R_68K_PC16 against undefined symbol
>> `board_init_f_mem'
>> +make[1]: *** [u-boot] Error 1
>> +make: *** [sub-make] Error 2
>> +arch/m68k/cpu/mcf5227x/start.o: In function `_start':
>> +build/../arch/m68k/cpu/mcf5227x/start.S:384: undefined reference to
>> `board_init_f_mem'
>> +arch/m68k/cpu/mcf5445x/start.o: In function `_start':
>> +build/../arch/m68k/cpu/mcf5445x/start.S:669: undefined reference to
>> `board_init_f_mem'
>> +build/../arch/m68k/cpu/mcf5445x/start.S:669:(.text+0x41c): relocation
>> truncated to fit: R_68K_PC16 against undefined symbol
>> `board_init_f_mem'
>> +build/../arch/m68k/cpu/mcf5227x/start.S:384:(.text+0x44a): relocation
>> truncated to fit: R_68K_PC16 against undefined symbol
>> `board_init_f_mem'
>> +arch/m68k/cpu/mcf52x2/start.o: In function `_after_flashbar_copy':
>> +build/../arch/m68k/cpu/mcf52x2/start.S:203: undefined reference to
>> `board_init_f_mem'
>> +build/../arch/m68k/cpu/mcf52x2/start.S:203:(.text+0x494): relocation
>> truncated to fit: R_68K_PC16 against undefined symbol
>> `board_init_f_mem'
>> +arch/m68k/cpu/mcf530x/start.o: In function `_start':
>> +build/../arch/m68k/cpu/mcf530x/start.S:142: undefined reference to
>> `board_init_f_mem'
>> +build/../arch/m68k/cpu/mcf530x/start.S:142:(.text+0x45e): relocation
>> truncated to fit: R_68K_PC16 against undefined symbol
>> `board_init_f_mem'
>> +arch/m68k/cpu/mcf532x/start.o: In function `_start':
>> +build/../arch/m68k/cpu/mcf532x/start.S:160: undefined reference to
>> `board_init_f_mem'
>> +arch/m68k/cpu/mcf52x2/start.o: In function `_start':
>> +build/../arch/m68k/cpu/mcf52x2/start.S:203:(.text+0x456): relocation
>> truncated to fit: R_68K_PC16 against undefined symbol
>> `board_init_f_mem'
>>
>
> Issue was not there at that submit time, now it seems due to growing of
> u-boot size.
>
> The "truncated to fit" issue is fixed with this patch.
>
> https://patchwork.ozlabs.org/patch/609150/
>
> So if you apply the above, and then this current, all should work.
There is mention of a v2 patch there - is it coming?
Regards,
Simon
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH v2 1/2] m68k: add malloc memory for early malloc
2016-04-15 15:23 ` Simon Glass
@ 2016-04-15 16:38 ` Angelo Dureghello
2016-04-22 18:33 ` Simon Glass
0 siblings, 1 reply; 10+ messages in thread
From: Angelo Dureghello @ 2016-04-15 16:38 UTC (permalink / raw)
To: u-boot
Hi Simon,
On 15/04/2016 17:23, Simon Glass wrote:
> Hi Angelo,
>
> On 15 April 2016 at 08:42, Angelo Dureghello <angelo@sysam.it> wrote:
>> Hi Simon,
>>
>>
>> On 15/04/2016 16:14, Simon Glass wrote:
>>>
>>> Hi Angelo,
>>>
>>> On 27 December 2015 at 21:22, Simon Glass <sjg@chromium.org> wrote:
>>>>
>>>> On 20 December 2015 at 08:54, Angelo Dureghello <angelo@sysam.it> wrote:
>>>>>
>>>>> To use serial uclass and DM, CONFIG_SYS_MALLOC_F must be used.
>>>>> So CONFIG_SYS_GENERIC_GLOBAL_DATA has been undefined and
>>>>> call to board_init_f_mem() is added for all cpu's.
>>>>>
>>>>> Signed-off-by: Angelo Dureghello <angelo@sysam.it>
>>>>>
>>>>> ---
>>>>>
>>>>> Changes in v2: None
>>>>>
>>>>> arch/m68k/cpu/mcf5227x/start.S | 8 ++++++++
>>>>> arch/m68k/cpu/mcf523x/start.S | 8 ++++++++
>>>>> arch/m68k/cpu/mcf52x2/start.S | 8 ++++++++
>>>>> arch/m68k/cpu/mcf530x/cpu_init.c | 2 +-
>>>>> arch/m68k/cpu/mcf530x/start.S | 8 ++++++++
>>>>> arch/m68k/cpu/mcf532x/start.S | 8 ++++++++
>>>>> arch/m68k/cpu/mcf5445x/start.S | 8 ++++++++
>>>>> arch/m68k/cpu/mcf547x_8x/start.S | 8 ++++++++
>>>>> arch/m68k/include/asm/config.h | 2 --
>>>>> 9 files changed, 57 insertions(+), 3 deletions(-)
>>>>
>>>>
>>>> Reviewed-by: Simon Glass <sjg@chromium.org>
>>>
>>>
>>> Unfortunately this breaks a lot of boards so I cannot apply it:
>>>
>>> 22: m68k: add malloc memory for early malloc
>>> m68k: + M5475FFE M5475GFE M5485AFE M5475BFE M52277EVB
>>> M5485FFE M54451EVB M54418TWR_nand_rmii M54418TWR_serial_mii M5475EFE
>>> M5485CFE M54451EVB_stmicro M5485BFE M5485HFE M54418TWR_serial_rmii
>>> M5475DFE M52277EVB_stmicro M5475AFE M5485GFE M54418TWR_nand_mii
>>> eb_cpu5282_internal amcore M53017EVB M54418TWR_nand_rmii_lowfreq
>>> M54418TWR M5475CFE M5485EFE M5485DFE eb_cpu5282
>>> +arch/m68k/cpu/mcf547x_8x/start.o: In function `_start':
>>> +build/../arch/m68k/cpu/mcf547x_8x/start.S:153: undefined reference to
>>> `board_init_f_mem'
>>> +build/../arch/m68k/cpu/mcf547x_8x/start.S:153:(.text+0x470):
>>> relocation truncated to fit: R_68K_PC16 against undefined symbol
>>> `board_init_f_mem'
>>> +make[1]: *** [u-boot] Error 1
>>> +make: *** [sub-make] Error 2
>>> +arch/m68k/cpu/mcf5227x/start.o: In function `_start':
>>> +build/../arch/m68k/cpu/mcf5227x/start.S:384: undefined reference to
>>> `board_init_f_mem'
>>> +arch/m68k/cpu/mcf5445x/start.o: In function `_start':
>>> +build/../arch/m68k/cpu/mcf5445x/start.S:669: undefined reference to
>>> `board_init_f_mem'
>>> +build/../arch/m68k/cpu/mcf5445x/start.S:669:(.text+0x41c): relocation
>>> truncated to fit: R_68K_PC16 against undefined symbol
>>> `board_init_f_mem'
>>> +build/../arch/m68k/cpu/mcf5227x/start.S:384:(.text+0x44a): relocation
>>> truncated to fit: R_68K_PC16 against undefined symbol
>>> `board_init_f_mem'
>>> +arch/m68k/cpu/mcf52x2/start.o: In function `_after_flashbar_copy':
>>> +build/../arch/m68k/cpu/mcf52x2/start.S:203: undefined reference to
>>> `board_init_f_mem'
>>> +build/../arch/m68k/cpu/mcf52x2/start.S:203:(.text+0x494): relocation
>>> truncated to fit: R_68K_PC16 against undefined symbol
>>> `board_init_f_mem'
>>> +arch/m68k/cpu/mcf530x/start.o: In function `_start':
>>> +build/../arch/m68k/cpu/mcf530x/start.S:142: undefined reference to
>>> `board_init_f_mem'
>>> +build/../arch/m68k/cpu/mcf530x/start.S:142:(.text+0x45e): relocation
>>> truncated to fit: R_68K_PC16 against undefined symbol
>>> `board_init_f_mem'
>>> +arch/m68k/cpu/mcf532x/start.o: In function `_start':
>>> +build/../arch/m68k/cpu/mcf532x/start.S:160: undefined reference to
>>> `board_init_f_mem'
>>> +arch/m68k/cpu/mcf52x2/start.o: In function `_start':
>>> +build/../arch/m68k/cpu/mcf52x2/start.S:203:(.text+0x456): relocation
>>> truncated to fit: R_68K_PC16 against undefined symbol
>>> `board_init_f_mem'
>>>
>>
>> Issue was not there at that submit time, now it seems due to growing of
>> u-boot size.
>>
>> The "truncated to fit" issue is fixed with this patch.
>>
>> https://patchwork.ozlabs.org/patch/609150/
>>
>> So if you apply the above, and then this current, all should work.
>
> There is mention of a v2 patch there - is it coming?
>
No, v2 was an attempt to fix the issue trough the linker script, but was
too complex.
So this is the definitive patch.
> Regards,
> Simon
>
Regards,
Angelo
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH v2 1/2] m68k: add malloc memory for early malloc
2016-04-15 16:38 ` Angelo Dureghello
@ 2016-04-22 18:33 ` Simon Glass
2016-04-22 22:02 ` Angelo Dureghello
0 siblings, 1 reply; 10+ messages in thread
From: Simon Glass @ 2016-04-22 18:33 UTC (permalink / raw)
To: u-boot
Hi Angelo,
On 15 April 2016 at 10:38, Angelo Dureghello <angelo@sysam.it> wrote:
> Hi Simon,
>
>
> On 15/04/2016 17:23, Simon Glass wrote:
>>
>> Hi Angelo,
>>
>> On 15 April 2016 at 08:42, Angelo Dureghello <angelo@sysam.it> wrote:
>>>
>>> Hi Simon,
>>>
>>>
>>> On 15/04/2016 16:14, Simon Glass wrote:
>>>>
>>>>
>>>> Hi Angelo,
>>>>
>>>> On 27 December 2015 at 21:22, Simon Glass <sjg@chromium.org> wrote:
>>>>>
>>>>>
>>>>> On 20 December 2015 at 08:54, Angelo Dureghello <angelo@sysam.it>
>>>>> wrote:
>>>>>>
>>>>>>
>>>>>> To use serial uclass and DM, CONFIG_SYS_MALLOC_F must be used.
>>>>>> So CONFIG_SYS_GENERIC_GLOBAL_DATA has been undefined and
>>>>>> call to board_init_f_mem() is added for all cpu's.
>>>>>>
>>>>>> Signed-off-by: Angelo Dureghello <angelo@sysam.it>
>>>>>>
>>>>>> ---
>>>>>>
>>>>>> Changes in v2: None
>>>>>>
>>>>>> arch/m68k/cpu/mcf5227x/start.S | 8 ++++++++
>>>>>> arch/m68k/cpu/mcf523x/start.S | 8 ++++++++
>>>>>> arch/m68k/cpu/mcf52x2/start.S | 8 ++++++++
>>>>>> arch/m68k/cpu/mcf530x/cpu_init.c | 2 +-
>>>>>> arch/m68k/cpu/mcf530x/start.S | 8 ++++++++
>>>>>> arch/m68k/cpu/mcf532x/start.S | 8 ++++++++
>>>>>> arch/m68k/cpu/mcf5445x/start.S | 8 ++++++++
>>>>>> arch/m68k/cpu/mcf547x_8x/start.S | 8 ++++++++
>>>>>> arch/m68k/include/asm/config.h | 2 --
>>>>>> 9 files changed, 57 insertions(+), 3 deletions(-)
>>>>>
>>>>>
>>>>>
>>>>> Reviewed-by: Simon Glass <sjg@chromium.org>
>>>>
>>>>
>>>>
>>>> Unfortunately this breaks a lot of boards so I cannot apply it:
>>>>
>>>> 22: m68k: add malloc memory for early malloc
>>>> m68k: + M5475FFE M5475GFE M5485AFE M5475BFE M52277EVB
>>>> M5485FFE M54451EVB M54418TWR_nand_rmii M54418TWR_serial_mii M5475EFE
>>>> M5485CFE M54451EVB_stmicro M5485BFE M5485HFE M54418TWR_serial_rmii
>>>> M5475DFE M52277EVB_stmicro M5475AFE M5485GFE M54418TWR_nand_mii
>>>> eb_cpu5282_internal amcore M53017EVB M54418TWR_nand_rmii_lowfreq
>>>> M54418TWR M5475CFE M5485EFE M5485DFE eb_cpu5282
>>>> +arch/m68k/cpu/mcf547x_8x/start.o: In function `_start':
>>>> +build/../arch/m68k/cpu/mcf547x_8x/start.S:153: undefined reference to
>>>> `board_init_f_mem'
>>>> +build/../arch/m68k/cpu/mcf547x_8x/start.S:153:(.text+0x470):
>>>> relocation truncated to fit: R_68K_PC16 against undefined symbol
>>>> `board_init_f_mem'
>>>> +make[1]: *** [u-boot] Error 1
>>>> +make: *** [sub-make] Error 2
>>>> +arch/m68k/cpu/mcf5227x/start.o: In function `_start':
>>>> +build/../arch/m68k/cpu/mcf5227x/start.S:384: undefined reference to
>>>> `board_init_f_mem'
>>>> +arch/m68k/cpu/mcf5445x/start.o: In function `_start':
>>>> +build/../arch/m68k/cpu/mcf5445x/start.S:669: undefined reference to
>>>> `board_init_f_mem'
>>>> +build/../arch/m68k/cpu/mcf5445x/start.S:669:(.text+0x41c): relocation
>>>> truncated to fit: R_68K_PC16 against undefined symbol
>>>> `board_init_f_mem'
>>>> +build/../arch/m68k/cpu/mcf5227x/start.S:384:(.text+0x44a): relocation
>>>> truncated to fit: R_68K_PC16 against undefined symbol
>>>> `board_init_f_mem'
>>>> +arch/m68k/cpu/mcf52x2/start.o: In function `_after_flashbar_copy':
>>>> +build/../arch/m68k/cpu/mcf52x2/start.S:203: undefined reference to
>>>> `board_init_f_mem'
>>>> +build/../arch/m68k/cpu/mcf52x2/start.S:203:(.text+0x494): relocation
>>>> truncated to fit: R_68K_PC16 against undefined symbol
>>>> `board_init_f_mem'
>>>> +arch/m68k/cpu/mcf530x/start.o: In function `_start':
>>>> +build/../arch/m68k/cpu/mcf530x/start.S:142: undefined reference to
>>>> `board_init_f_mem'
>>>> +build/../arch/m68k/cpu/mcf530x/start.S:142:(.text+0x45e): relocation
>>>> truncated to fit: R_68K_PC16 against undefined symbol
>>>> `board_init_f_mem'
>>>> +arch/m68k/cpu/mcf532x/start.o: In function `_start':
>>>> +build/../arch/m68k/cpu/mcf532x/start.S:160: undefined reference to
>>>> `board_init_f_mem'
>>>> +arch/m68k/cpu/mcf52x2/start.o: In function `_start':
>>>> +build/../arch/m68k/cpu/mcf52x2/start.S:203:(.text+0x456): relocation
>>>> truncated to fit: R_68K_PC16 against undefined symbol
>>>> `board_init_f_mem'
>>>>
>>>
>>> Issue was not there at that submit time, now it seems due to growing of
>>> u-boot size.
>>>
>>> The "truncated to fit" issue is fixed with this patch.
>>>
>>> https://patchwork.ozlabs.org/patch/609150/
>>>
>>> So if you apply the above, and then this current, all should work.
>>
>>
>> There is mention of a v2 patch there - is it coming?
>>
>
> No, v2 was an attempt to fix the issue trough the linker script, but was too
> complex.
> So this is the definitive patch.
I'm not really sure what to do here - the patches do not apply cleanly
to mainline. Can you please point me to the patches that should be
applied, and the order? Or perhaps resend if necessary. I am trying
this:
http://patchwork.ozlabs.org/bundle/sjg/dm6/
Regards,
Simon
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH v2 1/2] m68k: add malloc memory for early malloc
2016-04-22 18:33 ` Simon Glass
@ 2016-04-22 22:02 ` Angelo Dureghello
0 siblings, 0 replies; 10+ messages in thread
From: Angelo Dureghello @ 2016-04-22 22:02 UTC (permalink / raw)
To: u-boot
Hi Simon,
On 22/04/2016 20:33, Simon Glass wrote:
> Hi Angelo,
>
> On 15 April 2016 at 10:38, Angelo Dureghello <angelo@sysam.it> wrote:
>> Hi Simon,
>>
>>
>> On 15/04/2016 17:23, Simon Glass wrote:
>>>
>>> Hi Angelo,
>>>
>>> On 15 April 2016 at 08:42, Angelo Dureghello <angelo@sysam.it> wrote:
>>>>
>>>> Hi Simon,
>>>>
>>>>
>>>> On 15/04/2016 16:14, Simon Glass wrote:
>>>>>
>>>>>
>>>>> Hi Angelo,
>>>>>
>>>>> On 27 December 2015 at 21:22, Simon Glass <sjg@chromium.org> wrote:
>>>>>>
>>>>>>
>>>>>> On 20 December 2015 at 08:54, Angelo Dureghello <angelo@sysam.it>
>>>>>> wrote:
>>>>>>>
>>>>>>>
>>>>>>> To use serial uclass and DM, CONFIG_SYS_MALLOC_F must be used.
>>>>>>> So CONFIG_SYS_GENERIC_GLOBAL_DATA has been undefined and
>>>>>>> call to board_init_f_mem() is added for all cpu's.
>>>>>>>
>>>>>>> Signed-off-by: Angelo Dureghello <angelo@sysam.it>
>>>>>>>
>>>>>>> ---
>>>>>>>
>>>>>>> Changes in v2: None
>>>>>>>
>>>>>>> arch/m68k/cpu/mcf5227x/start.S | 8 ++++++++
>>>>>>> arch/m68k/cpu/mcf523x/start.S | 8 ++++++++
>>>>>>> arch/m68k/cpu/mcf52x2/start.S | 8 ++++++++
>>>>>>> arch/m68k/cpu/mcf530x/cpu_init.c | 2 +-
>>>>>>> arch/m68k/cpu/mcf530x/start.S | 8 ++++++++
>>>>>>> arch/m68k/cpu/mcf532x/start.S | 8 ++++++++
>>>>>>> arch/m68k/cpu/mcf5445x/start.S | 8 ++++++++
>>>>>>> arch/m68k/cpu/mcf547x_8x/start.S | 8 ++++++++
>>>>>>> arch/m68k/include/asm/config.h | 2 --
>>>>>>> 9 files changed, 57 insertions(+), 3 deletions(-)
>>>>>>
>>>>>>
>>>>>>
>>>>>> Reviewed-by: Simon Glass <sjg@chromium.org>
>>>>>
>>>>>
>>>>>
>>>>> Unfortunately this breaks a lot of boards so I cannot apply it:
>>>>>
>>>>> 22: m68k: add malloc memory for early malloc
>>>>> m68k: + M5475FFE M5475GFE M5485AFE M5475BFE M52277EVB
>>>>> M5485FFE M54451EVB M54418TWR_nand_rmii M54418TWR_serial_mii M5475EFE
>>>>> M5485CFE M54451EVB_stmicro M5485BFE M5485HFE M54418TWR_serial_rmii
>>>>> M5475DFE M52277EVB_stmicro M5475AFE M5485GFE M54418TWR_nand_mii
>>>>> eb_cpu5282_internal amcore M53017EVB M54418TWR_nand_rmii_lowfreq
>>>>> M54418TWR M5475CFE M5485EFE M5485DFE eb_cpu5282
>>>>> +arch/m68k/cpu/mcf547x_8x/start.o: In function `_start':
>>>>> +build/../arch/m68k/cpu/mcf547x_8x/start.S:153: undefined reference to
>>>>> `board_init_f_mem'
>>>>> +build/../arch/m68k/cpu/mcf547x_8x/start.S:153:(.text+0x470):
>>>>> relocation truncated to fit: R_68K_PC16 against undefined symbol
>>>>> `board_init_f_mem'
>>>>> +make[1]: *** [u-boot] Error 1
>>>>> +make: *** [sub-make] Error 2
>>>>> +arch/m68k/cpu/mcf5227x/start.o: In function `_start':
>>>>> +build/../arch/m68k/cpu/mcf5227x/start.S:384: undefined reference to
>>>>> `board_init_f_mem'
>>>>> +arch/m68k/cpu/mcf5445x/start.o: In function `_start':
>>>>> +build/../arch/m68k/cpu/mcf5445x/start.S:669: undefined reference to
>>>>> `board_init_f_mem'
>>>>> +build/../arch/m68k/cpu/mcf5445x/start.S:669:(.text+0x41c): relocation
>>>>> truncated to fit: R_68K_PC16 against undefined symbol
>>>>> `board_init_f_mem'
>>>>> +build/../arch/m68k/cpu/mcf5227x/start.S:384:(.text+0x44a): relocation
>>>>> truncated to fit: R_68K_PC16 against undefined symbol
>>>>> `board_init_f_mem'
>>>>> +arch/m68k/cpu/mcf52x2/start.o: In function `_after_flashbar_copy':
>>>>> +build/../arch/m68k/cpu/mcf52x2/start.S:203: undefined reference to
>>>>> `board_init_f_mem'
>>>>> +build/../arch/m68k/cpu/mcf52x2/start.S:203:(.text+0x494): relocation
>>>>> truncated to fit: R_68K_PC16 against undefined symbol
>>>>> `board_init_f_mem'
>>>>> +arch/m68k/cpu/mcf530x/start.o: In function `_start':
>>>>> +build/../arch/m68k/cpu/mcf530x/start.S:142: undefined reference to
>>>>> `board_init_f_mem'
>>>>> +build/../arch/m68k/cpu/mcf530x/start.S:142:(.text+0x45e): relocation
>>>>> truncated to fit: R_68K_PC16 against undefined symbol
>>>>> `board_init_f_mem'
>>>>> +arch/m68k/cpu/mcf532x/start.o: In function `_start':
>>>>> +build/../arch/m68k/cpu/mcf532x/start.S:160: undefined reference to
>>>>> `board_init_f_mem'
>>>>> +arch/m68k/cpu/mcf52x2/start.o: In function `_start':
>>>>> +build/../arch/m68k/cpu/mcf52x2/start.S:203:(.text+0x456): relocation
>>>>> truncated to fit: R_68K_PC16 against undefined symbol
>>>>> `board_init_f_mem'
>>>>>
>>>>
>>>> Issue was not there at that submit time, now it seems due to growing of
>>>> u-boot size.
>>>>
>>>> The "truncated to fit" issue is fixed with this patch.
>>>>
>>>> https://patchwork.ozlabs.org/patch/609150/
>>>>
>>>> So if you apply the above, and then this current, all should work.
>>>
>>>
>>> There is mention of a v2 patch there - is it coming?
>>>
>>
>> No, v2 was an attempt to fix the issue trough the linker script, but was too
>> complex.
>> So this is the definitive patch.
>
> I'm not really sure what to do here - the patches do not apply cleanly
> to mainline. Can you please point me to the patches that should be
> applied, and the order? Or perhaps resend if necessary. I am trying
> this:
>
> http://patchwork.ozlabs.org/bundle/sjg/dm6/
1) http://patchwork.ozlabs.org/patch/609150/
has already been applied to master, just tried buildman and all boards
compile.
------------------------------------------------------------------------
2) http://patchwork.ozlabs.org/patch/559343/
can't apply correctly anymore due to the patch 1 above, i'll resend a
new updated version.
3) http://patchwork.ozlabs.org/patch/559344/
It applies as is. But it is the 2/2 of the patch 2 above (559343), so i
resend in short a patch v3 including both patches (559343 and 559344).
So you don't need to do nothing until i send v.3.
Regards,
Angelo Dureghello
>
> Regards,
> Simon
>
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2016-04-22 22:02 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-12-20 15:54 [U-Boot] [PATCH v2 1/2] m68k: add malloc memory for early malloc Angelo Dureghello
2015-12-20 15:54 ` [U-Boot] [PATCH v2 2/2] m68k: add DM model serial driver Angelo Dureghello
2015-12-28 4:22 ` Simon Glass
2015-12-28 4:22 ` [U-Boot] [PATCH v2 1/2] m68k: add malloc memory for early malloc Simon Glass
2016-04-15 14:14 ` Simon Glass
2016-04-15 14:42 ` Angelo Dureghello
2016-04-15 15:23 ` Simon Glass
2016-04-15 16:38 ` Angelo Dureghello
2016-04-22 18:33 ` Simon Glass
2016-04-22 22:02 ` Angelo Dureghello
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.