[PATCH v2 0/3] Add AMBA bus probing support to ACPI

[PATCH v2 0/3] Add AMBA bus probing support to ACPI

[Aleksey Makarov]

As discussed when Shannon Zhao sent a patch to add platform_device support
to pl061 driver. Russel and other maintainers prefered that ACPI learned
how to create AMBA devices rather than converting/adding platform_device
support to AMBA drivers.

http://comments.gmane.org/gmane.linux.ports.arm.kernel/431364

1) Adds basic AMBA device probing support to ACPI, it uses a whitelist of
device IDs as the number of AMBA devices is limited. Currently the two ids
present are those used in QEMU for arm64.

2) Adds the plumbing into ACPI probe sequence.

3) From ACPI pl011 is only defined (SBSA document) to be in SBSA mode which has
reduced functionality. There may be a better method to do this that I have
overlooked.

v2:
- A new ACPI scan handler for AMBA devices has been implemented
- The order of `if` branches in amba-pl011.c has been changed
- A couple of `static`s have been added
- The compilation of the acpi_amba.c unit has made conditional
- A comment on SBSA UART has been added

v1:
https://lkml.kernel.org/g/1443609530-21524-1-git-send-email-graeme.gregory@linaro.org

Graeme Gregory (3):
  ACPI: amba bus probing support
  ACPI: scan add in amba probing
  serial: amba-pl011: add ACPI support to AMBA probe

 drivers/acpi/Makefile           |   1 +
 drivers/acpi/acpi_amba.c        | 149 ++++++++++++++++++++++++++++++++++++++++
 drivers/acpi/internal.h         |   5 ++
 drivers/acpi/scan.c             |   1 +
 drivers/tty/serial/amba-pl011.c |  37 +++++++---
 5 files changed, 182 insertions(+), 11 deletions(-)
 create mode 100644 drivers/acpi/acpi_amba.c

-- 
2.6.4

[PATCH v2 0/3] Add AMBA bus probing support to ACPI

[Aleksey Makarov]

As discussed when Shannon Zhao sent a patch to add platform_device support
to pl061 driver. Russel and other maintainers prefered that ACPI learned
how to create AMBA devices rather than converting/adding platform_device
support to AMBA drivers.

http://comments.gmane.org/gmane.linux.ports.arm.kernel/431364

1) Adds basic AMBA device probing support to ACPI, it uses a whitelist of
device IDs as the number of AMBA devices is limited. Currently the two ids
present are those used in QEMU for arm64.

2) Adds the plumbing into ACPI probe sequence.

3) From ACPI pl011 is only defined (SBSA document) to be in SBSA mode which has
reduced functionality. There may be a better method to do this that I have
overlooked.

v2:
- A new ACPI scan handler for AMBA devices has been implemented
- The order of `if` branches in amba-pl011.c has been changed
- A couple of `static`s have been added
- The compilation of the acpi_amba.c unit has made conditional
- A comment on SBSA UART has been added

v1:
https://lkml.kernel.org/g/1443609530-21524-1-git-send-email-graeme.gregory at linaro.org

Graeme Gregory (3):
  ACPI: amba bus probing support
  ACPI: scan add in amba probing
  serial: amba-pl011: add ACPI support to AMBA probe

 drivers/acpi/Makefile           |   1 +
 drivers/acpi/acpi_amba.c        | 149 ++++++++++++++++++++++++++++++++++++++++
 drivers/acpi/internal.h         |   5 ++
 drivers/acpi/scan.c             |   1 +
 drivers/tty/serial/amba-pl011.c |  37 +++++++---
 5 files changed, 182 insertions(+), 11 deletions(-)
 create mode 100644 drivers/acpi/acpi_amba.c

-- 
2.6.4

[PATCH v2 1/3] ACPI: amba bus probing support

[Aleksey Makarov]

From: Graeme Gregory <graeme.gregory@linaro.org>

On ARM64 some devices use the AMBA device and not the platform bus for
probing so add support for this. Uses a dummy clock for apb_pclk as ACPI
does not have a suitable clock representation and to keep the core
AMBA bus code unchanged between probing methods.

Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
---
 drivers/acpi/Makefile    |   1 +
 drivers/acpi/acpi_amba.c | 149 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/acpi/internal.h  |   5 ++
 3 files changed, 155 insertions(+)
 create mode 100644 drivers/acpi/acpi_amba.c

diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 675eaf3..3cf732f 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -43,6 +43,7 @@ acpi-y				+= pci_root.o pci_link.o pci_irq.o
 acpi-y				+= acpi_lpss.o acpi_apd.o
 acpi-y				+= acpi_platform.o
 acpi-y				+= acpi_pnp.o
+acpi-$(CONFIG_ARM_AMBA)	+= acpi_amba.o
 acpi-y				+= int340x_thermal.o
 acpi-y				+= power.o
 acpi-y				+= event.o
diff --git a/drivers/acpi/acpi_amba.c b/drivers/acpi/acpi_amba.c
new file mode 100644
index 0000000..ebc8913
--- /dev/null
+++ b/drivers/acpi/acpi_amba.c
@@ -0,0 +1,149 @@
+
+/*
+ * ACPI support for platform bus type.
+ *
+ * Copyright (C) 2015, Linaro Ltd
+ * Authors: Graeme Gregory <graeme.gregory@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/amba/bus.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "internal.h"
+
+static const struct acpi_device_id amba_id_list[] = {
+	{"ARMH0011", 0}, /* PL011 SBSA Uart */
+	{"ARMH0061", 0}, /* PL061 GPIO Device */
+	{"", 0},
+};
+
+static struct clk *amba_dummy_clk;
+
+static void amba_register_dummy_clk(void)
+{
+	struct clk *clk;
+
+	/* If clock already registered */
+	if (amba_dummy_clk)
+		return;
+
+	clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+	clk_register_clkdev(clk, "apb_pclk", NULL);
+
+	amba_dummy_clk = clk;
+}
+
+static int amba_handler_attach(struct acpi_device *adev,
+				const struct acpi_device_id *id)
+{
+	struct amba_device *dev = NULL;
+	struct acpi_device *acpi_parent;
+	struct resource_entry *rentry;
+	struct list_head resource_list;
+	struct resource *resources = NULL;
+	bool address_found = false;
+	int ret, count, irq_no = 0;
+
+	/* If the ACPI node already has a physical device attached, skip it. */
+	if (adev->physical_node_count)
+		return 0;
+
+	amba_register_dummy_clk();
+
+	dev = amba_device_alloc(NULL, 0, 0);
+	if (!dev) {
+		pr_err("%s(): amba_device_alloc() failed for %s\n",
+		       __func__, dev_name(&adev->dev));
+		return 0;
+	}
+
+	INIT_LIST_HEAD(&resource_list);
+	count = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
+	if (count < 0) {
+		return 0;
+	} else if (count > 0) {
+		resources = kmalloc_array(count, sizeof(struct resource),
+				    GFP_KERNEL);
+		if (!resources) {
+			acpi_dev_free_resource_list(&resource_list);
+			return 0;
+		}
+		count = 0;
+		list_for_each_entry(rentry, &resource_list, node) {
+			switch (resource_type(rentry->res)) {
+			case IORESOURCE_MEM:
+				if (!address_found) {
+					dev->res = *rentry->res;
+					address_found = true;
+				}
+				break;
+			case IORESOURCE_IRQ:
+				if (irq_no < AMBA_NR_IRQS)
+					dev->irq[irq_no++] = rentry->res->start;
+				break;
+			default:
+				dev_warn(&adev->dev, "Invalid resource\n");
+			}
+		}
+		acpi_dev_free_resource_list(&resource_list);
+	}
+
+	/*
+	 * If the ACPI node has a parent and that parent has a physical device
+	 * attached to it, that physical device should be the parent of the
+	 * platform device we are about to create.
+	 */
+	dev->dev.parent = NULL;
+	acpi_parent = adev->parent;
+	if (acpi_parent) {
+		struct acpi_device_physical_node *entry;
+		struct list_head *list;
+
+		mutex_lock(&acpi_parent->physical_node_lock);
+		list = &acpi_parent->physical_node_list;
+		if (!list_empty(list)) {
+			entry = list_first_entry(list,
+					struct acpi_device_physical_node,
+					node);
+			dev->dev.parent = entry->dev;
+		}
+		mutex_unlock(&acpi_parent->physical_node_lock);
+	}
+
+	dev_set_name(&dev->dev, "%s", dev_name(&adev->dev));
+	ACPI_COMPANION_SET(&dev->dev, adev);
+
+	ret = amba_device_add(dev, &iomem_resource);
+	if (ret) {
+		pr_err("%s(): amba_device_add() failed (%d) for %s\n",
+		       __func__, ret, dev_name(&adev->dev));
+		goto err_free;
+	}
+
+	return 1;
+
+err_free:
+	amba_device_put(dev);
+	return 0;
+}
+
+static struct acpi_scan_handler amba_handler = {
+	.ids = amba_id_list,
+	.attach = amba_handler_attach,
+};
+
+void __init acpi_amba_init(void)
+{
+	acpi_scan_add_handler(&amba_handler);
+}
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index 11d87bf..8f6e7ff 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -29,6 +29,11 @@ void acpi_processor_init(void);
 void acpi_platform_init(void);
 void acpi_pnp_init(void);
 void acpi_int340x_thermal_init(void);
+#ifdef CONFIG_ARM_AMBA
+void acpi_amba_init(void);
+#else
+void acpi_amba_init(void) {}
+#endif
 int acpi_sysfs_init(void);
 void acpi_container_init(void);
 void acpi_memory_hotplug_init(void);
-- 
2.6.4

[PATCH v2 1/3] ACPI: amba bus probing support

[Aleksey Makarov]

From: Graeme Gregory <graeme.gregory@linaro.org>

On ARM64 some devices use the AMBA device and not the platform bus for
probing so add support for this. Uses a dummy clock for apb_pclk as ACPI
does not have a suitable clock representation and to keep the core
AMBA bus code unchanged between probing methods.

Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
---
 drivers/acpi/Makefile    |   1 +
 drivers/acpi/acpi_amba.c | 149 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/acpi/internal.h  |   5 ++
 3 files changed, 155 insertions(+)
 create mode 100644 drivers/acpi/acpi_amba.c

diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 675eaf3..3cf732f 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -43,6 +43,7 @@ acpi-y				+= pci_root.o pci_link.o pci_irq.o
 acpi-y				+= acpi_lpss.o acpi_apd.o
 acpi-y				+= acpi_platform.o
 acpi-y				+= acpi_pnp.o
+acpi-$(CONFIG_ARM_AMBA)	+= acpi_amba.o
 acpi-y				+= int340x_thermal.o
 acpi-y				+= power.o
 acpi-y				+= event.o
diff --git a/drivers/acpi/acpi_amba.c b/drivers/acpi/acpi_amba.c
new file mode 100644
index 0000000..ebc8913
--- /dev/null
+++ b/drivers/acpi/acpi_amba.c
@@ -0,0 +1,149 @@
+
+/*
+ * ACPI support for platform bus type.
+ *
+ * Copyright (C) 2015, Linaro Ltd
+ * Authors: Graeme Gregory <graeme.gregory@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/amba/bus.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "internal.h"
+
+static const struct acpi_device_id amba_id_list[] = {
+	{"ARMH0011", 0}, /* PL011 SBSA Uart */
+	{"ARMH0061", 0}, /* PL061 GPIO Device */
+	{"", 0},
+};
+
+static struct clk *amba_dummy_clk;
+
+static void amba_register_dummy_clk(void)
+{
+	struct clk *clk;
+
+	/* If clock already registered */
+	if (amba_dummy_clk)
+		return;
+
+	clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+	clk_register_clkdev(clk, "apb_pclk", NULL);
+
+	amba_dummy_clk = clk;
+}
+
+static int amba_handler_attach(struct acpi_device *adev,
+				const struct acpi_device_id *id)
+{
+	struct amba_device *dev = NULL;
+	struct acpi_device *acpi_parent;
+	struct resource_entry *rentry;
+	struct list_head resource_list;
+	struct resource *resources = NULL;
+	bool address_found = false;
+	int ret, count, irq_no = 0;
+
+	/* If the ACPI node already has a physical device attached, skip it. */
+	if (adev->physical_node_count)
+		return 0;
+
+	amba_register_dummy_clk();
+
+	dev = amba_device_alloc(NULL, 0, 0);
+	if (!dev) {
+		pr_err("%s(): amba_device_alloc() failed for %s\n",
+		       __func__, dev_name(&adev->dev));
+		return 0;
+	}
+
+	INIT_LIST_HEAD(&resource_list);
+	count = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
+	if (count < 0) {
+		return 0;
+	} else if (count > 0) {
+		resources = kmalloc_array(count, sizeof(struct resource),
+				    GFP_KERNEL);
+		if (!resources) {
+			acpi_dev_free_resource_list(&resource_list);
+			return 0;
+		}
+		count = 0;
+		list_for_each_entry(rentry, &resource_list, node) {
+			switch (resource_type(rentry->res)) {
+			case IORESOURCE_MEM:
+				if (!address_found) {
+					dev->res = *rentry->res;
+					address_found = true;
+				}
+				break;
+			case IORESOURCE_IRQ:
+				if (irq_no < AMBA_NR_IRQS)
+					dev->irq[irq_no++] = rentry->res->start;
+				break;
+			default:
+				dev_warn(&adev->dev, "Invalid resource\n");
+			}
+		}
+		acpi_dev_free_resource_list(&resource_list);
+	}
+
+	/*
+	 * If the ACPI node has a parent and that parent has a physical device
+	 * attached to it, that physical device should be the parent of the
+	 * platform device we are about to create.
+	 */
+	dev->dev.parent = NULL;
+	acpi_parent = adev->parent;
+	if (acpi_parent) {
+		struct acpi_device_physical_node *entry;
+		struct list_head *list;
+
+		mutex_lock(&acpi_parent->physical_node_lock);
+		list = &acpi_parent->physical_node_list;
+		if (!list_empty(list)) {
+			entry = list_first_entry(list,
+					struct acpi_device_physical_node,
+					node);
+			dev->dev.parent = entry->dev;
+		}
+		mutex_unlock(&acpi_parent->physical_node_lock);
+	}
+
+	dev_set_name(&dev->dev, "%s", dev_name(&adev->dev));
+	ACPI_COMPANION_SET(&dev->dev, adev);
+
+	ret = amba_device_add(dev, &iomem_resource);
+	if (ret) {
+		pr_err("%s(): amba_device_add() failed (%d) for %s\n",
+		       __func__, ret, dev_name(&adev->dev));
+		goto err_free;
+	}
+
+	return 1;
+
+err_free:
+	amba_device_put(dev);
+	return 0;
+}
+
+static struct acpi_scan_handler amba_handler = {
+	.ids = amba_id_list,
+	.attach = amba_handler_attach,
+};
+
+void __init acpi_amba_init(void)
+{
+	acpi_scan_add_handler(&amba_handler);
+}
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index 11d87bf..8f6e7ff 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -29,6 +29,11 @@ void acpi_processor_init(void);
 void acpi_platform_init(void);
 void acpi_pnp_init(void);
 void acpi_int340x_thermal_init(void);
+#ifdef CONFIG_ARM_AMBA
+void acpi_amba_init(void);
+#else
+void acpi_amba_init(void) {}
+#endif
 int acpi_sysfs_init(void);
 void acpi_container_init(void);
 void acpi_memory_hotplug_init(void);
-- 
2.6.4

[PATCH v2 2/3] ACPI: scan add in amba probing

[Aleksey Makarov]

From: Graeme Gregory <graeme.gregory@linaro.org>

Add a new ACPI scan handler for AMBA devices.

Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
---
 drivers/acpi/scan.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 78d5f02..20c8cba 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1922,6 +1922,7 @@ int __init acpi_scan_init(void)
 	acpi_memory_hotplug_init();
 	acpi_pnp_init();
 	acpi_int340x_thermal_init();
+	acpi_amba_init();
 
 	acpi_scan_add_handler(&generic_device_handler);
 
-- 
2.6.4

[PATCH v2 2/3] ACPI: scan add in amba probing

[Aleksey Makarov]

From: Graeme Gregory <graeme.gregory@linaro.org>

Add a new ACPI scan handler for AMBA devices.

Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
---
 drivers/acpi/scan.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 78d5f02..20c8cba 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1922,6 +1922,7 @@ int __init acpi_scan_init(void)
 	acpi_memory_hotplug_init();
 	acpi_pnp_init();
 	acpi_int340x_thermal_init();
+	acpi_amba_init();
 
 	acpi_scan_add_handler(&generic_device_handler);
 
-- 
2.6.4

[PATCH v2 3/3] serial: amba-pl011: add ACPI support to AMBA probe

[Aleksey Makarov]

From: Graeme Gregory <graeme.gregory@linaro.org>

In ACPI this device is only defined in SBSA mode so
if we are coming from ACPI use this mode.

Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
---
 drivers/tty/serial/amba-pl011.c | 37 ++++++++++++++++++++++++++-----------
 1 file changed, 26 insertions(+), 11 deletions(-)

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 899a771..766ce4f 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2368,18 +2368,33 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 	if (!uap)
 		return -ENOMEM;
 
-	uap->clk = devm_clk_get(&dev->dev, NULL);
-	if (IS_ERR(uap->clk))
-		return PTR_ERR(uap->clk);
-
-	uap->vendor = vendor;
-	uap->lcrh_rx = vendor->lcrh_rx;
-	uap->lcrh_tx = vendor->lcrh_tx;
-	uap->fifosize = vendor->get_fifosize(dev);
-	uap->port.irq = dev->irq[0];
-	uap->port.ops = &amba_pl011_pops;
+	/* ACPI only defines SBSA variant */
+	if (ACPI_COMPANION(&dev->dev)) {
+		/*
+		 * According to ARM ARMH0011 is currently the only mapping
+		 * of pl011 in ACPI and it's mapped to SBSA UART mode
+		 */
+		uap->vendor	= &vendor_sbsa;
+		uap->fifosize	= 32;
+		uap->port.ops	= &sbsa_uart_pops;
+		uap->fixed_baud = 115200;
 
-	snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev));
+		snprintf(uap->type, sizeof(uap->type), "SBSA");
+	} else {
+		uap->clk = devm_clk_get(&dev->dev, NULL);
+		if (IS_ERR(uap->clk))
+			return PTR_ERR(uap->clk);
+
+		uap->vendor = vendor;
+		uap->lcrh_rx = vendor->lcrh_rx;
+		uap->lcrh_tx = vendor->lcrh_tx;
+		uap->fifosize = vendor->get_fifosize(dev);
+		uap->port.ops = &amba_pl011_pops;
+
+		snprintf(uap->type, sizeof(uap->type), "PL011 rev%u",
+				amba_rev(dev));
+	}
+	uap->port.irq = dev->irq[0];
 
 	ret = pl011_setup_port(&dev->dev, uap, &dev->res, portnr);
 	if (ret)
-- 
2.6.4

[PATCH v2 3/3] serial: amba-pl011: add ACPI support to AMBA probe

[Aleksey Makarov]

From: Graeme Gregory <graeme.gregory@linaro.org>

In ACPI this device is only defined in SBSA mode so
if we are coming from ACPI use this mode.

Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
---
 drivers/tty/serial/amba-pl011.c | 37 ++++++++++++++++++++++++++-----------
 1 file changed, 26 insertions(+), 11 deletions(-)

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 899a771..766ce4f 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2368,18 +2368,33 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 	if (!uap)
 		return -ENOMEM;
 
-	uap->clk = devm_clk_get(&dev->dev, NULL);
-	if (IS_ERR(uap->clk))
-		return PTR_ERR(uap->clk);
-
-	uap->vendor = vendor;
-	uap->lcrh_rx = vendor->lcrh_rx;
-	uap->lcrh_tx = vendor->lcrh_tx;
-	uap->fifosize = vendor->get_fifosize(dev);
-	uap->port.irq = dev->irq[0];
-	uap->port.ops = &amba_pl011_pops;
+	/* ACPI only defines SBSA variant */
+	if (ACPI_COMPANION(&dev->dev)) {
+		/*
+		 * According to ARM ARMH0011 is currently the only mapping
+		 * of pl011 in ACPI and it's mapped to SBSA UART mode
+		 */
+		uap->vendor	= &vendor_sbsa;
+		uap->fifosize	= 32;
+		uap->port.ops	= &sbsa_uart_pops;
+		uap->fixed_baud = 115200;
 
-	snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev));
+		snprintf(uap->type, sizeof(uap->type), "SBSA");
+	} else {
+		uap->clk = devm_clk_get(&dev->dev, NULL);
+		if (IS_ERR(uap->clk))
+			return PTR_ERR(uap->clk);
+
+		uap->vendor = vendor;
+		uap->lcrh_rx = vendor->lcrh_rx;
+		uap->lcrh_tx = vendor->lcrh_tx;
+		uap->fifosize = vendor->get_fifosize(dev);
+		uap->port.ops = &amba_pl011_pops;
+
+		snprintf(uap->type, sizeof(uap->type), "PL011 rev%u",
+				amba_rev(dev));
+	}
+	uap->port.irq = dev->irq[0];
 
 	ret = pl011_setup_port(&dev->dev, uap, &dev->res, portnr);
 	if (ret)
-- 
2.6.4

Re: [PATCH v2 1/3] ACPI: amba bus probing support

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 5151 bytes --]

Hi Graeme,

[auto build test ERROR on pm/linux-next]
[also build test ERROR on v4.4-rc6 next-20151221]

url:    https://github.com/0day-ci/linux/commits/Aleksey-Makarov/ACPI-amba-bus-probing-support/20151221-225448
base:   https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git linux-next
config: i386-randconfig-s1-201551 (attached as .config)
reproduce:
        # save the attached .config to linux build tree
        make ARCH=i386 

All errors (new ones prefixed by >>):

   drivers/acpi/utils.o: In function `acpi_amba_init':
>> utils.c:(.text+0x39): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/nvs.o: In function `acpi_amba_init':
   nvs.c:(.text+0x0): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/wakeup.o: In function `acpi_amba_init':
   wakeup.c:(.text+0x0): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/sleep.o: In function `acpi_amba_init':
   sleep.c:(.text+0x89): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/device_sysfs.o: In function `acpi_amba_init':
   device_sysfs.c:(.text+0x584): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/device_pm.o: In function `acpi_amba_init':
   device_pm.c:(.text+0x1ed): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/bus.o: In function `acpi_amba_init':
   bus.c:(.text+0x514): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/glue.o: In function `acpi_amba_init':
   glue.c:(.text+0xd3): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/scan.o: In function `acpi_amba_init':
   scan.c:(.text+0x1f1): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/acpi_processor.o: In function `acpi_amba_init':
   acpi_processor.c:(.text+0x39a): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/processor_pdc.o: In function `acpi_amba_init':
   processor_pdc.c:(.text+0x0): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/ec.o: In function `acpi_amba_init':
   ec.c:(.text+0x15ad): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/pci_root.o: In function `acpi_amba_init':
   pci_root.c:(.text+0x689): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/pci_link.o: In function `acpi_amba_init':
   pci_link.c:(.text+0x5c4): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/acpi_lpss.o: In function `acpi_amba_init':
   acpi_lpss.c:(.text+0x0): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/acpi_apd.o: In function `acpi_amba_init':
   acpi_apd.c:(.text+0x8d): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/acpi_platform.o: In function `acpi_amba_init':
   acpi_platform.c:(.text+0x0): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/int340x_thermal.o: In function `acpi_amba_init':
   int340x_thermal.c:(.text+0x1b): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/power.o: In function `acpi_amba_init':
   power.c:(.text+0x2c5): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/event.o: In function `acpi_amba_init':
   event.c:(.text+0x0): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/sysfs.o: In function `acpi_amba_init':
   sysfs.c:(.text+0x623): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/property.o: In function `acpi_amba_init':
   property.c:(.text+0x618): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/acpi_cmos_rtc.o: In function `acpi_amba_init':
   acpi_cmos_rtc.c:(.text+0xde): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/debugfs.o: In function `acpi_amba_init':
   debugfs.c:(.text+0x0): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/octet-stream, Size: 22084 bytes --]

Re: [PATCH v2 1/3] ACPI: amba bus probing support

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 5151 bytes --]

Hi Graeme,

[auto build test ERROR on pm/linux-next]
[also build test ERROR on v4.4-rc6 next-20151221]

url:    https://github.com/0day-ci/linux/commits/Aleksey-Makarov/ACPI-amba-bus-probing-support/20151221-225448
base:   https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git linux-next
config: i386-randconfig-s1-201551 (attached as .config)
reproduce:
        # save the attached .config to linux build tree
        make ARCH=i386 

All errors (new ones prefixed by >>):

   drivers/acpi/utils.o: In function `acpi_amba_init':
>> utils.c:(.text+0x39): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/nvs.o: In function `acpi_amba_init':
   nvs.c:(.text+0x0): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/wakeup.o: In function `acpi_amba_init':
   wakeup.c:(.text+0x0): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/sleep.o: In function `acpi_amba_init':
   sleep.c:(.text+0x89): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/device_sysfs.o: In function `acpi_amba_init':
   device_sysfs.c:(.text+0x584): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/device_pm.o: In function `acpi_amba_init':
   device_pm.c:(.text+0x1ed): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/bus.o: In function `acpi_amba_init':
   bus.c:(.text+0x514): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/glue.o: In function `acpi_amba_init':
   glue.c:(.text+0xd3): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/scan.o: In function `acpi_amba_init':
   scan.c:(.text+0x1f1): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/acpi_processor.o: In function `acpi_amba_init':
   acpi_processor.c:(.text+0x39a): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/processor_pdc.o: In function `acpi_amba_init':
   processor_pdc.c:(.text+0x0): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/ec.o: In function `acpi_amba_init':
   ec.c:(.text+0x15ad): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/pci_root.o: In function `acpi_amba_init':
   pci_root.c:(.text+0x689): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/pci_link.o: In function `acpi_amba_init':
   pci_link.c:(.text+0x5c4): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/acpi_lpss.o: In function `acpi_amba_init':
   acpi_lpss.c:(.text+0x0): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/acpi_apd.o: In function `acpi_amba_init':
   acpi_apd.c:(.text+0x8d): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/acpi_platform.o: In function `acpi_amba_init':
   acpi_platform.c:(.text+0x0): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/int340x_thermal.o: In function `acpi_amba_init':
   int340x_thermal.c:(.text+0x1b): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/power.o: In function `acpi_amba_init':
   power.c:(.text+0x2c5): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/event.o: In function `acpi_amba_init':
   event.c:(.text+0x0): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/sysfs.o: In function `acpi_amba_init':
   sysfs.c:(.text+0x623): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/property.o: In function `acpi_amba_init':
   property.c:(.text+0x618): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/acpi_cmos_rtc.o: In function `acpi_amba_init':
   acpi_cmos_rtc.c:(.text+0xde): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/debugfs.o: In function `acpi_amba_init':
   debugfs.c:(.text+0x0): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/octet-stream, Size: 22084 bytes --]

[PATCH v2 1/3] ACPI: amba bus probing support

[kbuild test robot]

Hi Graeme,

[auto build test ERROR on pm/linux-next]
[also build test ERROR on v4.4-rc6 next-20151221]

url:    https://github.com/0day-ci/linux/commits/Aleksey-Makarov/ACPI-amba-bus-probing-support/20151221-225448
base:   https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git linux-next
config: i386-randconfig-s1-201551 (attached as .config)
reproduce:
        # save the attached .config to linux build tree
        make ARCH=i386 

All errors (new ones prefixed by >>):

   drivers/acpi/utils.o: In function `acpi_amba_init':
>> utils.c:(.text+0x39): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/nvs.o: In function `acpi_amba_init':
   nvs.c:(.text+0x0): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/wakeup.o: In function `acpi_amba_init':
   wakeup.c:(.text+0x0): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/sleep.o: In function `acpi_amba_init':
   sleep.c:(.text+0x89): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/device_sysfs.o: In function `acpi_amba_init':
   device_sysfs.c:(.text+0x584): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/device_pm.o: In function `acpi_amba_init':
   device_pm.c:(.text+0x1ed): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/bus.o: In function `acpi_amba_init':
   bus.c:(.text+0x514): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/glue.o: In function `acpi_amba_init':
   glue.c:(.text+0xd3): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/scan.o: In function `acpi_amba_init':
   scan.c:(.text+0x1f1): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/acpi_processor.o: In function `acpi_amba_init':
   acpi_processor.c:(.text+0x39a): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/processor_pdc.o: In function `acpi_amba_init':
   processor_pdc.c:(.text+0x0): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/ec.o: In function `acpi_amba_init':
   ec.c:(.text+0x15ad): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/pci_root.o: In function `acpi_amba_init':
   pci_root.c:(.text+0x689): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/pci_link.o: In function `acpi_amba_init':
   pci_link.c:(.text+0x5c4): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/acpi_lpss.o: In function `acpi_amba_init':
   acpi_lpss.c:(.text+0x0): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/acpi_apd.o: In function `acpi_amba_init':
   acpi_apd.c:(.text+0x8d): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/acpi_platform.o: In function `acpi_amba_init':
   acpi_platform.c:(.text+0x0): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/int340x_thermal.o: In function `acpi_amba_init':
   int340x_thermal.c:(.text+0x1b): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/power.o: In function `acpi_amba_init':
   power.c:(.text+0x2c5): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/event.o: In function `acpi_amba_init':
   event.c:(.text+0x0): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/sysfs.o: In function `acpi_amba_init':
   sysfs.c:(.text+0x623): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/property.o: In function `acpi_amba_init':
   property.c:(.text+0x618): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/acpi_cmos_rtc.o: In function `acpi_amba_init':
   acpi_cmos_rtc.c:(.text+0xde): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here
   drivers/acpi/debugfs.o: In function `acpi_amba_init':
   debugfs.c:(.text+0x0): multiple definition of `acpi_amba_init'
   drivers/acpi/osl.o:osl.c:(.text+0x176): first defined here

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
-------------- next part --------------
A non-text attachment was scrubbed...
Name: .config.gz
Type: application/octet-stream
Size: 22084 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151222/9566c633/attachment-0001.obj>

Re: [PATCH v2 3/3] serial: amba-pl011: add ACPI support to AMBA probe

[Andy Shevchenko]

On Mon, Dec 21, 2015 at 4:49 PM, Aleksey Makarov
<aleksey.makarov@linaro.org> wrote:
> From: Graeme Gregory <graeme.gregory@linaro.org>
>
> In ACPI this device is only defined in SBSA mode so
> if we are coming from ACPI use this mode.
>
> Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
> Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
> ---
>  drivers/tty/serial/amba-pl011.c | 37 ++++++++++++++++++++++++++-----------
>  1 file changed, 26 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
> index 899a771..766ce4f 100644
> --- a/drivers/tty/serial/amba-pl011.c
> +++ b/drivers/tty/serial/amba-pl011.c
> @@ -2368,18 +2368,33 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
>         if (!uap)
>                 return -ENOMEM;
>
> -       uap->clk = devm_clk_get(&dev->dev, NULL);
> -       if (IS_ERR(uap->clk))
> -               return PTR_ERR(uap->clk);
> -
> -       uap->vendor = vendor;
> -       uap->lcrh_rx = vendor->lcrh_rx;
> -       uap->lcrh_tx = vendor->lcrh_tx;
> -       uap->fifosize = vendor->get_fifosize(dev);
> -       uap->port.irq = dev->irq[0];
> -       uap->port.ops = &amba_pl011_pops;
> +       /* ACPI only defines SBSA variant */
> +       if (ACPI_COMPANION(&dev->dev)) {

has_acpi_companion()

> +               /*
> +                * According to ARM ARMH0011 is currently the only mapping
> +                * of pl011 in ACPI and it's mapped to SBSA UART mode
> +                */
> +               uap->vendor     = &vendor_sbsa;
> +               uap->fifosize   = 32;
> +               uap->port.ops   = &sbsa_uart_pops;
> +               uap->fixed_baud = 115200;

Shouldn't you match by ID and provide the custom values if any?
On the other hand have you checked if it's possible to use _DSD in this case?

>
> -       snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev));
> +               snprintf(uap->type, sizeof(uap->type), "SBSA");
> +       } else {
> +               uap->clk = devm_clk_get(&dev->dev, NULL);
> +               if (IS_ERR(uap->clk))
> +                       return PTR_ERR(uap->clk);
> +
> +               uap->vendor = vendor;
> +               uap->lcrh_rx = vendor->lcrh_rx;
> +               uap->lcrh_tx = vendor->lcrh_tx;
> +               uap->fifosize = vendor->get_fifosize(dev);
> +               uap->port.ops = &amba_pl011_pops;
> +
> +               snprintf(uap->type, sizeof(uap->type), "PL011 rev%u",
> +                               amba_rev(dev));
> +       }
> +       uap->port.irq = dev->irq[0];
>
>         ret = pl011_setup_port(&dev->dev, uap, &dev->res, portnr);
>         if (ret)
> --
> 2.6.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/



-- 
With Best Regards,
Andy Shevchenko

[PATCH v2 3/3] serial: amba-pl011: add ACPI support to AMBA probe

[Andy Shevchenko]

On Mon, Dec 21, 2015 at 4:49 PM, Aleksey Makarov
<aleksey.makarov@linaro.org> wrote:
> From: Graeme Gregory <graeme.gregory@linaro.org>
>
> In ACPI this device is only defined in SBSA mode so
> if we are coming from ACPI use this mode.
>
> Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
> Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
> ---
>  drivers/tty/serial/amba-pl011.c | 37 ++++++++++++++++++++++++++-----------
>  1 file changed, 26 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
> index 899a771..766ce4f 100644
> --- a/drivers/tty/serial/amba-pl011.c
> +++ b/drivers/tty/serial/amba-pl011.c
> @@ -2368,18 +2368,33 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
>         if (!uap)
>                 return -ENOMEM;
>
> -       uap->clk = devm_clk_get(&dev->dev, NULL);
> -       if (IS_ERR(uap->clk))
> -               return PTR_ERR(uap->clk);
> -
> -       uap->vendor = vendor;
> -       uap->lcrh_rx = vendor->lcrh_rx;
> -       uap->lcrh_tx = vendor->lcrh_tx;
> -       uap->fifosize = vendor->get_fifosize(dev);
> -       uap->port.irq = dev->irq[0];
> -       uap->port.ops = &amba_pl011_pops;
> +       /* ACPI only defines SBSA variant */
> +       if (ACPI_COMPANION(&dev->dev)) {

has_acpi_companion()

> +               /*
> +                * According to ARM ARMH0011 is currently the only mapping
> +                * of pl011 in ACPI and it's mapped to SBSA UART mode
> +                */
> +               uap->vendor     = &vendor_sbsa;
> +               uap->fifosize   = 32;
> +               uap->port.ops   = &sbsa_uart_pops;
> +               uap->fixed_baud = 115200;

Shouldn't you match by ID and provide the custom values if any?
On the other hand have you checked if it's possible to use _DSD in this case?

>
> -       snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev));
> +               snprintf(uap->type, sizeof(uap->type), "SBSA");
> +       } else {
> +               uap->clk = devm_clk_get(&dev->dev, NULL);
> +               if (IS_ERR(uap->clk))
> +                       return PTR_ERR(uap->clk);
> +
> +               uap->vendor = vendor;
> +               uap->lcrh_rx = vendor->lcrh_rx;
> +               uap->lcrh_tx = vendor->lcrh_tx;
> +               uap->fifosize = vendor->get_fifosize(dev);
> +               uap->port.ops = &amba_pl011_pops;
> +
> +               snprintf(uap->type, sizeof(uap->type), "PL011 rev%u",
> +                               amba_rev(dev));
> +       }
> +       uap->port.irq = dev->irq[0];
>
>         ret = pl011_setup_port(&dev->dev, uap, &dev->res, portnr);
>         if (ret)
> --
> 2.6.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/



-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v2 3/3] serial: amba-pl011: add ACPI support to AMBA probe

[G Gregory]

On 21 December 2015 at 18:11, Andy Shevchenko <andy.shevchenko@gmail.com> wrote:
> On Mon, Dec 21, 2015 at 4:49 PM, Aleksey Makarov
> <aleksey.makarov@linaro.org> wrote:
>> From: Graeme Gregory <graeme.gregory@linaro.org>
>>
>> In ACPI this device is only defined in SBSA mode so
>> if we are coming from ACPI use this mode.
>>
>> Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
>> Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
>> ---
>>  drivers/tty/serial/amba-pl011.c | 37 ++++++++++++++++++++++++++-----------
>>  1 file changed, 26 insertions(+), 11 deletions(-)
>>
>> diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
>> index 899a771..766ce4f 100644
>> --- a/drivers/tty/serial/amba-pl011.c
>> +++ b/drivers/tty/serial/amba-pl011.c
>> @@ -2368,18 +2368,33 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
>>         if (!uap)
>>                 return -ENOMEM;
>>
>> -       uap->clk = devm_clk_get(&dev->dev, NULL);
>> -       if (IS_ERR(uap->clk))
>> -               return PTR_ERR(uap->clk);
>> -
>> -       uap->vendor = vendor;
>> -       uap->lcrh_rx = vendor->lcrh_rx;
>> -       uap->lcrh_tx = vendor->lcrh_tx;
>> -       uap->fifosize = vendor->get_fifosize(dev);
>> -       uap->port.irq = dev->irq[0];
>> -       uap->port.ops = &amba_pl011_pops;
>> +       /* ACPI only defines SBSA variant */
>> +       if (ACPI_COMPANION(&dev->dev)) {
>
> has_acpi_companion()
>
>> +               /*
>> +                * According to ARM ARMH0011 is currently the only mapping
>> +                * of pl011 in ACPI and it's mapped to SBSA UART mode
>> +                */
>> +               uap->vendor     = &vendor_sbsa;
>> +               uap->fifosize   = 32;
>> +               uap->port.ops   = &sbsa_uart_pops;
>> +               uap->fixed_baud = 115200;
>
> Shouldn't you match by ID and provide the custom values if any?
> On the other hand have you checked if it's possible to use _DSD in this case?
>
So far I have not seen any use of SBSA UART other than this in real
life. I am a little opposed to providing complexity people are not
going to use.

Graeme

[PATCH v2 3/3] serial: amba-pl011: add ACPI support to AMBA probe

[G Gregory]

On 21 December 2015 at 18:11, Andy Shevchenko <andy.shevchenko@gmail.com> wrote:
> On Mon, Dec 21, 2015 at 4:49 PM, Aleksey Makarov
> <aleksey.makarov@linaro.org> wrote:
>> From: Graeme Gregory <graeme.gregory@linaro.org>
>>
>> In ACPI this device is only defined in SBSA mode so
>> if we are coming from ACPI use this mode.
>>
>> Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
>> Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
>> ---
>>  drivers/tty/serial/amba-pl011.c | 37 ++++++++++++++++++++++++++-----------
>>  1 file changed, 26 insertions(+), 11 deletions(-)
>>
>> diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
>> index 899a771..766ce4f 100644
>> --- a/drivers/tty/serial/amba-pl011.c
>> +++ b/drivers/tty/serial/amba-pl011.c
>> @@ -2368,18 +2368,33 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
>>         if (!uap)
>>                 return -ENOMEM;
>>
>> -       uap->clk = devm_clk_get(&dev->dev, NULL);
>> -       if (IS_ERR(uap->clk))
>> -               return PTR_ERR(uap->clk);
>> -
>> -       uap->vendor = vendor;
>> -       uap->lcrh_rx = vendor->lcrh_rx;
>> -       uap->lcrh_tx = vendor->lcrh_tx;
>> -       uap->fifosize = vendor->get_fifosize(dev);
>> -       uap->port.irq = dev->irq[0];
>> -       uap->port.ops = &amba_pl011_pops;
>> +       /* ACPI only defines SBSA variant */
>> +       if (ACPI_COMPANION(&dev->dev)) {
>
> has_acpi_companion()
>
>> +               /*
>> +                * According to ARM ARMH0011 is currently the only mapping
>> +                * of pl011 in ACPI and it's mapped to SBSA UART mode
>> +                */
>> +               uap->vendor     = &vendor_sbsa;
>> +               uap->fifosize   = 32;
>> +               uap->port.ops   = &sbsa_uart_pops;
>> +               uap->fixed_baud = 115200;
>
> Shouldn't you match by ID and provide the custom values if any?
> On the other hand have you checked if it's possible to use _DSD in this case?
>
So far I have not seen any use of SBSA UART other than this in real
life. I am a little opposed to providing complexity people are not
going to use.

Graeme