All of lore.kernel.org
 help / color / mirror / Atom feed
From: Liviu Dudau <Liviu.Dudau@arm.com>
To: David Airlie <airlied@linux.ie>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will.deacon@arm.com>,
	Rob Herring <robh+dt@kernel.org>,
	Sudeep Holla <sudeep.holla@arm.com>,
	Jon Medhurst <tixy@linaro.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>, Rob Herring <robh@kernel.org>,
	Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Pawel Moll <pawel.moll@arm.com>, Arnd Bergmann <arnd@arndb.de>,
	Olof Johansson <olof@lixom.net>,
	Punit Agrawal <punit.agrawal@arm.com>,
	DRI devel <dri-devel@lists.freedesktop.org>,
	devicetree <devicetree@vger.kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	LAKML <linux-arm-kernel@lists.infradead.org>,
	LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH v7 3/4] arm64: Juno: Add HDLCD support to the Juno boards.
Date: Tue, 22 Dec 2015 17:41:48 +0000	[thread overview]
Message-ID: <1450806109-470-4-git-send-email-Liviu.Dudau@arm.com> (raw)
In-Reply-To: <1450806109-470-1-git-send-email-Liviu.Dudau@arm.com>

ARM's Juno board has two HDLCD controllers, each linked to an NXP
TDA19988 HDMI transmitter that provides output encoding. Add them
to the device tree.

Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
---
 arch/arm64/boot/dts/arm/juno-base.dtsi | 46 +++++++++++++++++++++++++++++++---
 1 file changed, 42 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index dd5158e..8ee094a 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -92,8 +92,8 @@
 			scpi_clk: scpi_clocks@3 {
 				compatible = "arm,scpi-variable-clocks";
 				#clock-cells = <1>;
-				clock-indices = <3>, <4>;
-				clock-output-names = "pxlclk0", "pxlclk1";
+				clock-indices = <3>;
+				clock-output-names = "pxlclk";
 			};
 		};
 
@@ -123,6 +123,34 @@
 		clock-names = "apb_pclk";
 	};
 
+	hdlcd@7ff50000 {
+		compatible = "arm,hdlcd";
+		reg = <0 0x7ff50000 0 0x1000>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scpi_clk 3>;
+		clock-names = "pxlclk";
+
+		port {
+			hdlcd1_output: endpoint@0 {
+				remote-endpoint = <&tda998x_1_input>;
+			};
+		};
+	};
+
+	hdlcd@7ff60000 {
+		compatible = "arm,hdlcd";
+		reg = <0 0x7ff60000 0 0x1000>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scpi_clk 3>;
+		clock-names = "pxlclk";
+
+		port {
+			hdlcd0_output: endpoint@0 {
+				remote-endpoint = <&tda998x_0_input>;
+			};
+		};
+	};
+
 	soc_uart0: uart@7ff80000 {
 		compatible = "arm,pl011", "arm,primecell";
 		reg = <0x0 0x7ff80000 0x0 0x1000>;
@@ -141,14 +169,24 @@
 		i2c-sda-hold-time-ns = <500>;
 		clocks = <&soc_smc50mhz>;
 
-		dvi0: dvi-transmitter@70 {
+		hdmi-transmitter@70 {
 			compatible = "nxp,tda998x";
 			reg = <0x70>;
+			port {
+				tda998x_0_input: endpoint@0 {
+					remote-endpoint = <&hdlcd0_output>;
+				};
+			};
 		};
 
-		dvi1: dvi-transmitter@71 {
+		hdmi-transmitter@71 {
 			compatible = "nxp,tda998x";
 			reg = <0x71>;
+			port {
+				tda998x_1_input: endpoint@0 {
+					remote-endpoint = <&hdlcd1_output>;
+				};
+			};
 		};
 	};
 
-- 
2.6.4


WARNING: multiple messages have this Message-ID (diff)
From: Liviu Dudau <Liviu.Dudau@arm.com>
To: David Airlie <airlied@linux.ie>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will.deacon@arm.com>,
	Rob Herring <robh+dt@kernel.org>,
	Sudeep Holla <sudeep.holla@arm.com>,
	Jon Medhurst <tixy@linaro.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>, Rob Herring <robh@kernel.org>,
	Russell King <rmk+kernel@arm.linux.org.uk>
Cc: devicetree <devicetree@vger.kernel.org>,
	Pawel Moll <pawel.moll@arm.com>, Arnd Bergmann <arnd@arndb.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Punit Agrawal <punit.agrawal@arm.com>,
	LKML <linux-kernel@vger.kernel.org>,
	DRI devel <dri-devel@lists.freedesktop.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	LAKML <linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v7 3/4] arm64: Juno: Add HDLCD support to the Juno boards.
Date: Tue, 22 Dec 2015 17:41:48 +0000	[thread overview]
Message-ID: <1450806109-470-4-git-send-email-Liviu.Dudau@arm.com> (raw)
In-Reply-To: <1450806109-470-1-git-send-email-Liviu.Dudau@arm.com>

ARM's Juno board has two HDLCD controllers, each linked to an NXP
TDA19988 HDMI transmitter that provides output encoding. Add them
to the device tree.

Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
---
 arch/arm64/boot/dts/arm/juno-base.dtsi | 46 +++++++++++++++++++++++++++++++---
 1 file changed, 42 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index dd5158e..8ee094a 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -92,8 +92,8 @@
 			scpi_clk: scpi_clocks@3 {
 				compatible = "arm,scpi-variable-clocks";
 				#clock-cells = <1>;
-				clock-indices = <3>, <4>;
-				clock-output-names = "pxlclk0", "pxlclk1";
+				clock-indices = <3>;
+				clock-output-names = "pxlclk";
 			};
 		};
 
@@ -123,6 +123,34 @@
 		clock-names = "apb_pclk";
 	};
 
+	hdlcd@7ff50000 {
+		compatible = "arm,hdlcd";
+		reg = <0 0x7ff50000 0 0x1000>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scpi_clk 3>;
+		clock-names = "pxlclk";
+
+		port {
+			hdlcd1_output: endpoint@0 {
+				remote-endpoint = <&tda998x_1_input>;
+			};
+		};
+	};
+
+	hdlcd@7ff60000 {
+		compatible = "arm,hdlcd";
+		reg = <0 0x7ff60000 0 0x1000>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scpi_clk 3>;
+		clock-names = "pxlclk";
+
+		port {
+			hdlcd0_output: endpoint@0 {
+				remote-endpoint = <&tda998x_0_input>;
+			};
+		};
+	};
+
 	soc_uart0: uart@7ff80000 {
 		compatible = "arm,pl011", "arm,primecell";
 		reg = <0x0 0x7ff80000 0x0 0x1000>;
@@ -141,14 +169,24 @@
 		i2c-sda-hold-time-ns = <500>;
 		clocks = <&soc_smc50mhz>;
 
-		dvi0: dvi-transmitter@70 {
+		hdmi-transmitter@70 {
 			compatible = "nxp,tda998x";
 			reg = <0x70>;
+			port {
+				tda998x_0_input: endpoint@0 {
+					remote-endpoint = <&hdlcd0_output>;
+				};
+			};
 		};
 
-		dvi1: dvi-transmitter@71 {
+		hdmi-transmitter@71 {
 			compatible = "nxp,tda998x";
 			reg = <0x71>;
+			port {
+				tda998x_1_input: endpoint@0 {
+					remote-endpoint = <&hdlcd1_output>;
+				};
+			};
 		};
 	};
 
-- 
2.6.4

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

WARNING: multiple messages have this Message-ID (diff)
From: Liviu.Dudau@arm.com (Liviu Dudau)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 3/4] arm64: Juno: Add HDLCD support to the Juno boards.
Date: Tue, 22 Dec 2015 17:41:48 +0000	[thread overview]
Message-ID: <1450806109-470-4-git-send-email-Liviu.Dudau@arm.com> (raw)
In-Reply-To: <1450806109-470-1-git-send-email-Liviu.Dudau@arm.com>

ARM's Juno board has two HDLCD controllers, each linked to an NXP
TDA19988 HDMI transmitter that provides output encoding. Add them
to the device tree.

Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
---
 arch/arm64/boot/dts/arm/juno-base.dtsi | 46 +++++++++++++++++++++++++++++++---
 1 file changed, 42 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index dd5158e..8ee094a 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -92,8 +92,8 @@
 			scpi_clk: scpi_clocks at 3 {
 				compatible = "arm,scpi-variable-clocks";
 				#clock-cells = <1>;
-				clock-indices = <3>, <4>;
-				clock-output-names = "pxlclk0", "pxlclk1";
+				clock-indices = <3>;
+				clock-output-names = "pxlclk";
 			};
 		};
 
@@ -123,6 +123,34 @@
 		clock-names = "apb_pclk";
 	};
 
+	hdlcd at 7ff50000 {
+		compatible = "arm,hdlcd";
+		reg = <0 0x7ff50000 0 0x1000>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scpi_clk 3>;
+		clock-names = "pxlclk";
+
+		port {
+			hdlcd1_output: endpoint at 0 {
+				remote-endpoint = <&tda998x_1_input>;
+			};
+		};
+	};
+
+	hdlcd at 7ff60000 {
+		compatible = "arm,hdlcd";
+		reg = <0 0x7ff60000 0 0x1000>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scpi_clk 3>;
+		clock-names = "pxlclk";
+
+		port {
+			hdlcd0_output: endpoint at 0 {
+				remote-endpoint = <&tda998x_0_input>;
+			};
+		};
+	};
+
 	soc_uart0: uart at 7ff80000 {
 		compatible = "arm,pl011", "arm,primecell";
 		reg = <0x0 0x7ff80000 0x0 0x1000>;
@@ -141,14 +169,24 @@
 		i2c-sda-hold-time-ns = <500>;
 		clocks = <&soc_smc50mhz>;
 
-		dvi0: dvi-transmitter at 70 {
+		hdmi-transmitter at 70 {
 			compatible = "nxp,tda998x";
 			reg = <0x70>;
+			port {
+				tda998x_0_input: endpoint at 0 {
+					remote-endpoint = <&hdlcd0_output>;
+				};
+			};
 		};
 
-		dvi1: dvi-transmitter at 71 {
+		hdmi-transmitter at 71 {
 			compatible = "nxp,tda998x";
 			reg = <0x71>;
+			port {
+				tda998x_1_input: endpoint at 0 {
+					remote-endpoint = <&hdlcd1_output>;
+				};
+			};
 		};
 	};
 
-- 
2.6.4

  parent reply	other threads:[~2015-12-22 17:43 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-22 17:41 [PATCH v7 0/4] drm: Add support for the ARM HDLCD display controller Liviu Dudau
2015-12-22 17:41 ` Liviu Dudau
2015-12-22 17:41 ` Liviu Dudau
2015-12-22 17:41 ` [PATCH v7 1/4] drm: arm: Add DT bindings documentation for HDLCD driver Liviu Dudau
2015-12-22 17:41   ` Liviu Dudau
2015-12-22 17:41   ` Liviu Dudau
2015-12-22 17:41 ` [PATCH v7 2/4] drm: Add support for ARM's HDLCD controller Liviu Dudau
2015-12-22 17:41   ` Liviu Dudau
2015-12-22 17:41   ` Liviu Dudau
2015-12-23 10:03   ` Daniel Stone
2015-12-23 10:03     ` Daniel Stone
2015-12-23 10:03     ` Daniel Stone
2015-12-23 10:06     ` Liviu Dudau
2015-12-23 10:06       ` Liviu Dudau
2015-12-23 10:06       ` Liviu Dudau
2015-12-22 17:41 ` Liviu Dudau [this message]
2015-12-22 17:41   ` [PATCH v7 3/4] arm64: Juno: Add HDLCD support to the Juno boards Liviu Dudau
2015-12-22 17:41   ` Liviu Dudau
2015-12-22 17:41 ` [PATCH v7 4/4] MAINTAINERS: Add Liviu Dudau as maintainer for ARM HDLCD driver Liviu Dudau
2015-12-22 17:41   ` Liviu Dudau
2015-12-22 17:41   ` Liviu Dudau

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1450806109-470-4-git-send-email-Liviu.Dudau@arm.com \
    --to=liviu.dudau@arm.com \
    --cc=airlied@linux.ie \
    --cc=akpm@linux-foundation.org \
    --cc=arnd@arndb.de \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=galak@codeaurora.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=olof@lixom.net \
    --cc=pawel.moll@arm.com \
    --cc=punit.agrawal@arm.com \
    --cc=rmk+kernel@arm.linux.org.uk \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=sudeep.holla@arm.com \
    --cc=tixy@linaro.org \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.