All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bin Meng <bmeng.cn@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 3/8] serial: lpuart: Move CONFIG_FSL_LPUART to Kconfig
Date: Thu, 31 Dec 2015 00:53:05 -0800	[thread overview]
Message-ID: <1451551990-32165-4-git-send-email-bmeng.cn@gmail.com> (raw)
In-Reply-To: <1451551990-32165-1-git-send-email-bmeng.cn@gmail.com>

LPUART is seen on Freescale VF610 and QorIQ Layerscape devices.
Create a Kconfig option and move it to defconfig for all boards
that have this serial driver.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
---

 configs/colibri_vf_defconfig                 | 1 +
 configs/colibri_vf_dtb_defconfig             | 1 +
 configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 1 +
 configs/ls1021aqds_nor_lpuart_defconfig      | 1 +
 configs/ls1021atwr_nor_lpuart_defconfig      | 1 +
 configs/pcm052_defconfig                     | 1 +
 configs/vf610twr_defconfig                   | 1 +
 configs/vf610twr_nand_defconfig              | 1 +
 drivers/serial/Kconfig                       | 6 ++++++
 include/configs/colibri_vf.h                 | 1 -
 include/configs/ls1021aqds.h                 | 1 -
 include/configs/ls1021atwr.h                 | 1 -
 include/configs/pcm052.h                     | 1 -
 include/configs/vf610twr.h                   | 1 -
 14 files changed, 14 insertions(+), 5 deletions(-)

diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig
index f8441e3..45917c8 100644
--- a/configs/colibri_vf_defconfig
+++ b/configs/colibri_vf_defconfig
@@ -8,3 +8,4 @@ CONFIG_CMD_GPIO=y
 CONFIG_DM=y
 CONFIG_NAND_VF610_NFC=y
 CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y
+CONFIG_FSL_LPUART=y
diff --git a/configs/colibri_vf_dtb_defconfig b/configs/colibri_vf_dtb_defconfig
index 3596cec..b1a843a 100644
--- a/configs/colibri_vf_dtb_defconfig
+++ b/configs/colibri_vf_dtb_defconfig
@@ -11,3 +11,4 @@ CONFIG_OF_CONTROL=y
 CONFIG_DM=y
 CONFIG_NAND_VF610_NFC=y
 CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y
+CONFIG_FSL_LPUART=y
diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
index 68bd117..44b2a0d 100644
--- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
+++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
@@ -4,3 +4,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,LPUART"
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_NETDEVICES=y
 CONFIG_E1000=y
+CONFIG_FSL_LPUART=y
diff --git a/configs/ls1021aqds_nor_lpuart_defconfig b/configs/ls1021aqds_nor_lpuart_defconfig
index b2f6832..1186af2 100644
--- a/configs/ls1021aqds_nor_lpuart_defconfig
+++ b/configs/ls1021aqds_nor_lpuart_defconfig
@@ -4,3 +4,4 @@ CONFIG_SYS_EXTRA_OPTIONS="LPUART"
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_NETDEVICES=y
 CONFIG_E1000=y
+CONFIG_FSL_LPUART=y
diff --git a/configs/ls1021atwr_nor_lpuart_defconfig b/configs/ls1021atwr_nor_lpuart_defconfig
index d7afca9..58cd61f 100644
--- a/configs/ls1021atwr_nor_lpuart_defconfig
+++ b/configs/ls1021atwr_nor_lpuart_defconfig
@@ -4,3 +4,4 @@ CONFIG_SYS_EXTRA_OPTIONS="LPUART"
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_NETDEVICES=y
 CONFIG_E1000=y
+CONFIG_FSL_LPUART=y
diff --git a/configs/pcm052_defconfig b/configs/pcm052_defconfig
index 9125645..26ab733 100644
--- a/configs/pcm052_defconfig
+++ b/configs/pcm052_defconfig
@@ -3,3 +3,4 @@ CONFIG_TARGET_PCM052=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/phytec/pcm052/imximage.cfg,ENV_IS_IN_NAND"
 CONFIG_NAND_VF610_NFC=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
+CONFIG_FSL_LPUART=y
diff --git a/configs/vf610twr_defconfig b/configs/vf610twr_defconfig
index dc8df5c..d51c93b 100644
--- a/configs/vf610twr_defconfig
+++ b/configs/vf610twr_defconfig
@@ -6,3 +6,4 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_I
 CONFIG_NAND_VF610_NFC=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
 CONFIG_SPI_FLASH=y
+CONFIG_FSL_LPUART=y
diff --git a/configs/vf610twr_nand_defconfig b/configs/vf610twr_nand_defconfig
index 98880f3..299fa8f 100644
--- a/configs/vf610twr_nand_defconfig
+++ b/configs/vf610twr_nand_defconfig
@@ -6,3 +6,4 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_I
 CONFIG_NAND_VF610_NFC=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
 CONFIG_SPI_FLASH=y
+CONFIG_FSL_LPUART=y
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 1fc287e..3b54511 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -186,6 +186,12 @@ config ALTERA_UART
 	  Select this to enable an UART for Altera devices. Please find
 	  details on the "Embedded Peripherals IP User Guide" of Altera.
 
+config FSL_LPUART
+	bool "Freescale LPUART support"
+	help
+	  Select this to enable a Low Power UART for Freescale VF610 and
+	  QorIQ Layerscape devices.
+
 config SYS_NS16550
 	bool "NS16550 UART or compatible"
 	help
diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 708c79a..5aed3a5 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -36,7 +36,6 @@
 
 #define CONFIG_BOARD_EARLY_INIT_F
 
-#define CONFIG_FSL_LPUART
 #define LPUART_BASE			UART0_BASE
 
 /* Allow to overwrite serial and ethaddr */
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 2e8dbc7..e8b1eca 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -371,7 +371,6 @@ unsigned long get_board_ddr_clk(void);
  * Serial Port
  */
 #ifdef CONFIG_LPUART
-#define CONFIG_FSL_LPUART
 #define CONFIG_LPUART_32B_REG
 #else
 #define CONFIG_CONS_INDEX		1
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index bbef2a7..317ba62 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -266,7 +266,6 @@
  * Serial Port
  */
 #ifdef CONFIG_LPUART
-#define CONFIG_FSL_LPUART
 #define CONFIG_LPUART_32B_REG
 #else
 #define CONFIG_CONS_INDEX		1
diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h
index b851bba..891bdb0 100644
--- a/include/configs/pcm052.h
+++ b/include/configs/pcm052.h
@@ -27,7 +27,6 @@
 
 #define CONFIG_BOARD_EARLY_INIT_F
 
-#define CONFIG_FSL_LPUART
 #define LPUART_BASE			UART1_BASE
 
 /* Allow to overwrite serial and ethaddr */
diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
index 34df6f0..dcfafaf 100644
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@@ -34,7 +34,6 @@
 
 #define CONFIG_BOARD_EARLY_INIT_F
 
-#define CONFIG_FSL_LPUART
 #define LPUART_BASE			UART1_BASE
 
 /* Allow to overwrite serial and ethaddr */
-- 
1.8.2.1

  parent reply	other threads:[~2015-12-31  8:53 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-31  8:53 [U-Boot] [PATCH 0/8] arm: ls1021atwr: Convert to driver model and enable serial support Bin Meng
2015-12-31  8:53 ` [U-Boot] [PATCH 1/8] fdt: Fix up stdout correctly in fdt_fixup_stdout() Bin Meng
2016-01-08  3:34   ` Simon Glass
2016-01-11  3:02     ` Bin Meng
2016-01-11 16:58       ` Simon Glass
2016-01-13  9:14         ` Bin Meng
2016-01-13 20:10           ` Simon Glass
2015-12-31  8:53 ` [U-Boot] [PATCH 2/8] arm: ls1021atwr: Convert to driver model and enable serial support Bin Meng
2015-12-31  8:53 ` Bin Meng [this message]
2016-01-06  0:25   ` [U-Boot] [PATCH 3/8] serial: lpuart: Move CONFIG_FSL_LPUART to Kconfig Simon Glass
2016-01-13 18:45   ` Stefan Agner
2015-12-31  8:53 ` [U-Boot] [PATCH 4/8] serial: lpuart: Fix several cosmetic issues Bin Meng
2016-01-06  0:25   ` Simon Glass
2015-12-31  8:53 ` [U-Boot] [PATCH 5/8] serial: lpuart: Call local version of setbrg and putc directly Bin Meng
2016-01-06  0:25   ` Simon Glass
2015-12-31  8:53 ` [U-Boot] [PATCH 6/8] serial: lpuart: Prepare the driver for DM conversion Bin Meng
2016-01-06  0:25   ` Simon Glass
2016-01-13 18:51   ` Stefan Agner
2016-01-14  2:11     ` Bin Meng
2015-12-31  8:53 ` [U-Boot] [PATCH 7/8] serial: lpuart: Add driver model serial support Bin Meng
2016-01-06  0:25   ` Simon Glass
2016-01-11  3:08     ` Bin Meng
2016-01-13  5:49   ` Bhuvanchandra DV
2016-01-13  6:13     ` Bin Meng
2016-01-13  8:07       ` Bhuvanchandra DV
2016-01-13  8:19         ` Bin Meng
2016-01-13 19:20           ` Stefan Agner
2016-01-14  2:24             ` Bin Meng
2016-01-14  8:10               ` Bhuvanchandra DV
2015-12-31  8:53 ` [U-Boot] [PATCH 8/8] arm: ls1021atwr: Enable driver model lpuart serial driver Bin Meng
2016-01-06  0:25   ` Simon Glass
2016-01-06  5:31 ` [U-Boot] [PATCH 0/8] arm: ls1021atwr: Convert to driver model and enable serial support Huan Wang
2016-01-07  2:26   ` Bin Meng
2016-01-07  6:01     ` Huan Wang
2016-01-07  6:15       ` Bin Meng
2016-01-07  6:19         ` Huan Wang
2016-01-07  9:22           ` Bin Meng
2016-01-11  3:10             ` Bin Meng
2016-01-11 16:58               ` Simon Glass
2016-01-13 19:03             ` Stefan Agner
2016-01-14  2:13               ` Bin Meng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1451551990-32165-4-git-send-email-bmeng.cn@gmail.com \
    --to=bmeng.cn@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.