[kvm-unit-tests PATCH 00/11] share pci-testdev with the framework

[kvm-unit-tests PATCH 00/11] share pci-testdev with the framework

[Andrew Jones]

This series moves code around in order to liberate some
pci and pci-testdev code from x86-only territory. There
are no functional changes, but now x86 unit tests also get
to enjoy asm-generic/io.h and asm-generic/page.h defines.

A couple other non-function changes made are; the value
of PCIDEVADDR_INVALID is now more invalid, and we import
linux-uapi/pci_regs.h, which is necessary for additional
architectures to use lib/pci.


Andrew Jones (11):
  asm-generic: add portio accessors to io.h
  x86: move io.h to asm
  x86: use common portio accessors from io.h
  x86: pci.h: remove useless include
  x86: mov pci.h to asm
  x86: move x86/pci to the common lib
  x86: share pci-testdev hdr in common lib
  lib/pci: make PCIDEVADDR_INVALID truly invalid
  lib: add linux dir for kernel uapi headers
  Revert "arm/arm64: import include/uapi/linux/psci.h"
  lib/linux: import pci_regs.h

 Makefile                                  |   2 +-
 config/config-x86-common.mak              |   2 +-
 lib/arm/asm/page.h                        |   2 +-
 lib/arm/asm/psci.h                        |   2 +-
 lib/arm64/asm/page.h                      |   2 +-
 lib/arm64/asm/psci.h                      |   2 +-
 lib/arm64/asm/uapi-psci.h                 |   1 -
 lib/asm-generic/io.h                      |  52 ++
 lib/asm-generic/page.h                    |   4 +-
 lib/const.h                               |  11 -
 lib/linux/const.h                         |  27 +
 lib/linux/pci_regs.h                      | 949 ++++++++++++++++++++++++++++++
 lib/{arm/asm/uapi-psci.h => linux/psci.h} |  25 +-
 lib/{x86 => }/pci.c                       |  24 +-
 lib/pci.h                                 |  42 ++
 lib/x86/{ => asm}/io.h                    |   8 +
 lib/x86/asm/page.h                        |   1 +
 lib/x86/asm/pci.h                         |  15 +
 lib/x86/io.c                              |   2 +-
 lib/x86/pci.h                             |  16 -
 lib/x86/vm.c                              |   7 -
 lib/x86/vm.h                              |   4 +-
 x86/hyperv.h                              |   2 +-
 x86/hyperv_stimer.c                       |   2 +-
 x86/hyperv_synic.c                        |   2 +-
 x86/init.c                                |   2 +-
 x86/svm.c                                 |   2 +-
 x86/vmexit.c                              |  58 +-
 x86/vmx.c                                 |   2 +-
 x86/vmx_tests.c                           |   2 +-
 30 files changed, 1150 insertions(+), 122 deletions(-)
 delete mode 100644 lib/arm64/asm/uapi-psci.h
 delete mode 100644 lib/const.h
 create mode 100644 lib/linux/const.h
 create mode 100644 lib/linux/pci_regs.h
 rename lib/{arm/asm/uapi-psci.h => linux/psci.h} (81%)
 rename lib/{x86 => }/pci.c (70%)
 create mode 100644 lib/pci.h
 rename lib/x86/{ => asm}/io.h (87%)
 create mode 100644 lib/x86/asm/page.h
 create mode 100644 lib/x86/asm/pci.h
 delete mode 100644 lib/x86/pci.h

-- 
2.4.3

[kvm-unit-tests PATCH 01/11] asm-generic: add portio accessors to io.h

[Andrew Jones]

Signed-off-by: Andrew Jones <drjones@redhat.com>
---
 lib/asm-generic/io.h | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/lib/asm-generic/io.h b/lib/asm-generic/io.h
index a9939d3a5921f..d66af3b4d6825 100644
--- a/lib/asm-generic/io.h
+++ b/lib/asm-generic/io.h
@@ -152,6 +152,58 @@ static inline u64 __bswap64(u64 x)
 #define writeq(b, addr) \
 	({ wmb(); __raw_writeq(cpu_to_le64(b), addr); })
 
+#ifndef PCI_IOBASE
+#define PCI_IOBASE ((void *)0)
+#endif
+
+#ifndef inb
+#define inb inb
+static inline u8 inb(unsigned long addr)
+{
+	return readb(PCI_IOBASE + addr);
+}
+#endif
+
+#ifndef inw
+#define inw inw
+static inline u16 inw(unsigned long addr)
+{
+	return readw(PCI_IOBASE + addr);
+}
+#endif
+
+#ifndef inl
+#define inl inl
+static inline u32 inl(unsigned long addr)
+{
+	return readl(PCI_IOBASE + addr);
+}
+#endif
+
+#ifndef outb
+#define outb outb
+static inline void outb(u8 value, unsigned long addr)
+{
+	writeb(value, PCI_IOBASE + addr);
+}
+#endif
+
+#ifndef outw
+#define outw outw
+static inline void outw(u16 value, unsigned long addr)
+{
+	writew(value, PCI_IOBASE + addr);
+}
+#endif
+
+#ifndef outl
+#define outl outl
+static inline void outl(u32 value, unsigned long addr)
+{
+	writel(value, PCI_IOBASE + addr);
+}
+#endif
+
 #ifndef ioremap
 static inline void *ioremap(u64 phys_addr, size_t size __unused)
 {
-- 
2.4.3

[kvm-unit-tests PATCH 02/11] x86: move io.h to asm

[Andrew Jones]

Also throw an '#include "asm-generic/io.h"' at the bottom. Doing
that requires also adding an asm/page.h, and then some changes to
vm.[ch] to integrate with it.

Signed-off-by: Andrew Jones <drjones@redhat.com>
---
 lib/x86/{ => asm}/io.h | 8 ++++++++
 lib/x86/asm/page.h     | 1 +
 lib/x86/io.c           | 2 +-
 lib/x86/vm.c           | 7 -------
 lib/x86/vm.h           | 4 +++-
 x86/hyperv.h           | 2 +-
 x86/hyperv_stimer.c    | 2 +-
 x86/hyperv_synic.c     | 2 +-
 x86/init.c             | 2 +-
 x86/svm.c              | 2 +-
 x86/vmx.c              | 2 +-
 x86/vmx_tests.c        | 2 +-
 12 files changed, 20 insertions(+), 16 deletions(-)
 rename lib/x86/{ => asm}/io.h (87%)
 create mode 100644 lib/x86/asm/page.h

diff --git a/lib/x86/io.h b/lib/x86/asm/io.h
similarity index 87%
rename from lib/x86/io.h
rename to lib/x86/asm/io.h
index bd6341c6c103e..19f4dd73ae173 100644
--- a/lib/x86/io.h
+++ b/lib/x86/asm/io.h
@@ -1,6 +1,7 @@
 #ifndef IO_H
 #define IO_H
 
+#define inb inb
 static inline unsigned char inb(unsigned short port)
 {
     unsigned char value;
@@ -8,6 +9,7 @@ static inline unsigned char inb(unsigned short port)
     return value;
 }
 
+#define inw inw
 static inline unsigned short inw(unsigned short port)
 {
     unsigned short value;
@@ -15,6 +17,7 @@ static inline unsigned short inw(unsigned short port)
     return value;
 }
 
+#define inl inl
 static inline unsigned int inl(unsigned short port)
 {
     unsigned int value;
@@ -22,19 +25,24 @@ static inline unsigned int inl(unsigned short port)
     return value;
 }
 
+#define outb outb
 static inline void outb(unsigned char value, unsigned short port)
 {
     asm volatile("outb %b0, %w1" : : "a"(value), "Nd"(port));
 }
 
+#define outw outw
 static inline void outw(unsigned short value, unsigned short port)
 {
     asm volatile("outw %w0, %w1" : : "a"(value), "Nd"(port));
 }
 
+#define outl outl
 static inline void outl(unsigned int value, unsigned short port)
 {
     asm volatile("outl %0, %w1" : : "a"(value), "Nd"(port));
 }
 
+#include "asm-generic/io.h"
+
 #endif
diff --git a/lib/x86/asm/page.h b/lib/x86/asm/page.h
new file mode 100644
index 0000000000000..91a4bc3b7f86e
--- /dev/null
+++ b/lib/x86/asm/page.h
@@ -0,0 +1 @@
+#include "asm-generic/page.h"
diff --git a/lib/x86/io.c b/lib/x86/io.c
index d3b971ef67b0e..d396d42d0535c 100644
--- a/lib/x86/io.c
+++ b/lib/x86/io.c
@@ -1,6 +1,6 @@
 #include "libcflat.h"
 #include "smp.h"
-#include "io.h"
+#include "asm/io.h"
 #ifndef USE_SERIAL
 #define USE_SERIAL
 #endif
diff --git a/lib/x86/vm.c b/lib/x86/vm.c
index b820c7def72ab..dfd6d512dc650 100644
--- a/lib/x86/vm.c
+++ b/lib/x86/vm.c
@@ -2,13 +2,6 @@
 #include "vm.h"
 #include "libcflat.h"
 
-#define PAGE_SIZE 4096ul
-#ifdef __x86_64__
-#define LARGE_PAGE_SIZE (512 * PAGE_SIZE)
-#else
-#define LARGE_PAGE_SIZE (1024 * PAGE_SIZE)
-#endif
-
 static void *free = 0;
 static void *vfree_top = 0;
 
diff --git a/lib/x86/vm.h b/lib/x86/vm.h
index 28794d7f26c6b..0d549a810ffb8 100644
--- a/lib/x86/vm.h
+++ b/lib/x86/vm.h
@@ -2,8 +2,8 @@
 #define VM_H
 
 #include "processor.h"
+#include "asm/page.h"
 
-#define PAGE_SIZE 4096ul
 #ifdef __x86_64__
 #define LARGE_PAGE_SIZE (512 * PAGE_SIZE)
 #else
@@ -39,11 +39,13 @@ unsigned long *install_large_page(unsigned long *cr3,unsigned long phys,
                                   void *virt);
 unsigned long *install_page(unsigned long *cr3, unsigned long phys, void *virt);
 
+#define virt_to_phys virt_to_phys
 static inline unsigned long virt_to_phys(const void *virt)
 {
     return (unsigned long)virt;
 }
 
+#define phys_to_virt phys_to_virt
 static inline void *phys_to_virt(unsigned long phys)
 {
     return (void *)phys;
diff --git a/x86/hyperv.h b/x86/hyperv.h
index faf931bb4373e..628c08b5b565b 100644
--- a/x86/hyperv.h
+++ b/x86/hyperv.h
@@ -3,7 +3,7 @@
 
 #include "libcflat.h"
 #include "processor.h"
-#include "io.h"
+#include "asm/io.h"
 
 #define HYPERV_CPUID_FEATURES                   0x40000003
 
diff --git a/x86/hyperv_stimer.c b/x86/hyperv_stimer.c
index 767459e55cc0b..0031835b44a9f 100644
--- a/x86/hyperv_stimer.c
+++ b/x86/hyperv_stimer.c
@@ -5,10 +5,10 @@
 #include "vm.h"
 #include "apic.h"
 #include "desc.h"
-#include "io.h"
 #include "smp.h"
 #include "atomic.h"
 #include "hyperv.h"
+#include "asm/io.h"
 
 #define MAX_CPUS 4
 
diff --git a/x86/hyperv_synic.c b/x86/hyperv_synic.c
index 6e088944be1f2..dee4ec373a760 100644
--- a/x86/hyperv_synic.c
+++ b/x86/hyperv_synic.c
@@ -5,10 +5,10 @@
 #include "vm.h"
 #include "apic.h"
 #include "desc.h"
-#include "io.h"
 #include "smp.h"
 #include "atomic.h"
 #include "hyperv.h"
+#include "asm/io.h"
 
 #define MAX_CPUS 4
 
diff --git a/x86/init.c b/x86/init.c
index 344dc1c0b234e..f47d671e62a85 100644
--- a/x86/init.c
+++ b/x86/init.c
@@ -1,6 +1,6 @@
 #include "libcflat.h"
 #include "apic.h"
-#include "io.h"
+#include "asm/io.h"
 
 #define KBD_CCMD_READ_OUTPORT   0xD0    /* read output port */
 #define KBD_CCMD_WRITE_OUTPORT  0xD1    /* write output port */
diff --git a/x86/svm.c b/x86/svm.c
index 1046ddf73732f..d659ae8aafefd 100644
--- a/x86/svm.c
+++ b/x86/svm.c
@@ -6,7 +6,7 @@
 #include "vm.h"
 #include "smp.h"
 #include "types.h"
-#include "io.h"
+#include "asm/io.h"
 
 /* for the nested page table*/
 u64 *pml4e;
diff --git a/x86/vmx.c b/x86/vmx.c
index 3fa1a735881f7..56edb2f9086b2 100644
--- a/x86/vmx.c
+++ b/x86/vmx.c
@@ -35,7 +35,7 @@
 #include "vmx.h"
 #include "msr.h"
 #include "smp.h"
-#include "io.h"
+#include "asm/io.h"
 
 u64 *vmxon_region;
 struct vmcs *vmcs_root;
diff --git a/x86/vmx_tests.c b/x86/vmx_tests.c
index 451fdd75d24e1..8b055086c7d60 100644
--- a/x86/vmx_tests.c
+++ b/x86/vmx_tests.c
@@ -7,7 +7,7 @@
 #include "msr.h"
 #include "processor.h"
 #include "vm.h"
-#include "io.h"
+#include "asm/io.h"
 #include "fwcfg.h"
 #include "isr.h"
 #include "apic.h"
-- 
2.4.3

[kvm-unit-tests PATCH 03/11] x86: use common portio accessors from io.h

[Andrew Jones]

x86 code reinvents io*/out* in a few places. To prepare for a common
pci driver use the common accessors from io.h in pci.c and vmexit.c.
Now we use the correct order (value, port) for out* too.

Signed-off-by: Andrew Jones <drjones@redhat.com>
---
 lib/x86/pci.c | 14 ++------------
 x86/vmexit.c  | 40 ++++++----------------------------------
 2 files changed, 8 insertions(+), 46 deletions(-)

diff --git a/lib/x86/pci.c b/lib/x86/pci.c
index 231668a72101f..991345ce77858 100644
--- a/lib/x86/pci.c
+++ b/lib/x86/pci.c
@@ -1,21 +1,11 @@
 #include <linux/pci_regs.h>
 #include "pci.h"
+#include "asm/io.h"
 
-static void outl(unsigned short port, unsigned val)
-{
-    asm volatile("outl %0, %w1" : : "a"(val), "Nd"(port));
-}
-
-static unsigned inl(unsigned short port)
-{
-    unsigned data;
-    asm volatile("inl %w1, %0" : "=a"(data) : "Nd"(port));
-    return data;
-}
 static uint32_t pci_config_read(pcidevaddr_t dev, uint8_t reg)
 {
     uint32_t index = reg | (dev << 8) | (0x1 << 31); 
-    outl(0xCF8, index);
+    outl(index, 0xCF8);
     return inl(0xCFC);
 }
 
diff --git a/x86/vmexit.c b/x86/vmexit.c
index 1413454d9ccb6..1d74a89567adc 100644
--- a/x86/vmexit.c
+++ b/x86/vmexit.c
@@ -6,6 +6,7 @@
 #include "x86/desc.h"
 #include "x86/pci.h"
 #include "x86/acpi.h"
+#include "asm/io.h"
 
 struct test {
 	void (*func)(void);
@@ -15,35 +16,6 @@ struct test {
 	bool (*next)(struct test *);
 };
 
-static void outb(unsigned short port, unsigned val)
-{
-    asm volatile("outb %b0, %w1" : : "a"(val), "Nd"(port));
-}
-
-static void outw(unsigned short port, unsigned val)
-{
-    asm volatile("outw %w0, %w1" : : "a"(val), "Nd"(port));
-}
-
-static void outl(unsigned short port, unsigned val)
-{
-    asm volatile("outl %0, %w1" : : "a"(val), "Nd"(port));
-}
-
-static unsigned int inb(unsigned short port)
-{
-    unsigned int val;
-    asm volatile("xorl %0, %0; inb %w1, %b0" : "=a"(val) : "Nd"(port));
-    return val;
-}
-
-static unsigned int inl(unsigned short port)
-{
-    unsigned int val;
-    asm volatile("inl %w1, %0" : "=a"(val) : "Nd"(port));
-    return val;
-}
-
 #define GOAL (1ull << 30)
 
 static int nr_cpus;
@@ -123,7 +95,7 @@ static void inl_nop_kernel(void)
 
 static void outl_elcr_kernel(void)
 {
-    outb(0x4d0, 0);
+    outb(0, 0x4d0);
 }
 
 static void mov_dr(void)
@@ -201,17 +173,17 @@ static void pci_mem_testl(void)
 
 static void pci_io_testb(void)
 {
-	outb(pci_test.ioport, pci_test.data);
+	outb(pci_test.data, pci_test.ioport);
 }
 
 static void pci_io_testw(void)
 {
-	outw(pci_test.ioport, pci_test.data);
+	outw(pci_test.data, pci_test.ioport);
 }
 
 static void pci_io_testl(void)
 {
-	outl(pci_test.ioport, pci_test.data);
+	outl(pci_test.data, pci_test.ioport);
 }
 
 static uint8_t ioreadb(unsigned long addr, bool io)
@@ -236,7 +208,7 @@ static uint32_t ioreadl(unsigned long addr, bool io)
 static void iowriteb(unsigned long addr, uint8_t data, bool io)
 {
 	if (io) {
-		outb(addr, data);
+		outb(data, addr);
 	} else {
 		*(volatile uint8_t *)addr = data;
 	}
-- 
2.4.3

[kvm-unit-tests PATCH 04/11] x86: pci.h: remove useless include

[Andrew Jones]

Signed-off-by: Andrew Jones <drjones@redhat.com>
---
 lib/x86/pci.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/lib/x86/pci.h b/lib/x86/pci.h
index 0f69ef0e84f3b..046e68f9a65b6 100644
--- a/lib/x86/pci.h
+++ b/lib/x86/pci.h
@@ -1,7 +1,6 @@
 #ifndef PCI_H
 #define PCI_H
 
-#include <inttypes.h>
 #include "libcflat.h"
 
 typedef uint16_t pcidevaddr_t;
-- 
2.4.3

[kvm-unit-tests PATCH 05/11] x86: mov pci.h to asm

[Andrew Jones]

Also move pci_config_read into pci.h from pci.c.

Signed-off-by: Andrew Jones <drjones@redhat.com>
---
 lib/x86/{ => asm}/pci.h |  8 ++++++++
 lib/x86/pci.c           | 10 +---------
 x86/vmexit.c            |  2 +-
 3 files changed, 10 insertions(+), 10 deletions(-)
 rename lib/x86/{ => asm}/pci.h (65%)

diff --git a/lib/x86/pci.h b/lib/x86/asm/pci.h
similarity index 65%
rename from lib/x86/pci.h
rename to lib/x86/asm/pci.h
index 046e68f9a65b6..8ad93a87966c6 100644
--- a/lib/x86/pci.h
+++ b/lib/x86/asm/pci.h
@@ -2,6 +2,7 @@
 #define PCI_H
 
 #include "libcflat.h"
+#include "asm/io.h"
 
 typedef uint16_t pcidevaddr_t;
 enum {
@@ -12,4 +13,11 @@ unsigned long pci_bar_addr(pcidevaddr_t dev, int bar_num);
 bool pci_bar_is_memory(pcidevaddr_t dev, int bar_num);
 bool pci_bar_is_valid(pcidevaddr_t dev, int bar_num);
 
+static inline uint32_t pci_config_read(pcidevaddr_t dev, uint8_t reg)
+{
+    uint32_t index = reg | (dev << 8) | (0x1 << 31);
+    outl(index, 0xCF8);
+    return inl(0xCFC);
+}
+
 #endif
diff --git a/lib/x86/pci.c b/lib/x86/pci.c
index 991345ce77858..7002d80836a4c 100644
--- a/lib/x86/pci.c
+++ b/lib/x86/pci.c
@@ -1,13 +1,5 @@
 #include <linux/pci_regs.h>
-#include "pci.h"
-#include "asm/io.h"
-
-static uint32_t pci_config_read(pcidevaddr_t dev, uint8_t reg)
-{
-    uint32_t index = reg | (dev << 8) | (0x1 << 31); 
-    outl(index, 0xCF8);
-    return inl(0xCFC);
-}
+#include "asm/pci.h"
 
 /* Scan bus look for a specific device. Only bus 0 scanned for now. */
 pcidevaddr_t pci_find_dev(uint16_t vendor_id, uint16_t device_id)
diff --git a/x86/vmexit.c b/x86/vmexit.c
index 1d74a89567adc..61243a9d63c9a 100644
--- a/x86/vmexit.c
+++ b/x86/vmexit.c
@@ -4,7 +4,7 @@
 #include "atomic.h"
 #include "x86/vm.h"
 #include "x86/desc.h"
-#include "x86/pci.h"
+#include "asm/pci.h"
 #include "x86/acpi.h"
 #include "asm/io.h"
 
-- 
2.4.3

[kvm-unit-tests PATCH 06/11] x86: move x86/pci to the common lib

[Andrew Jones]

Signed-off-by: Andrew Jones <drjones@redhat.com>
---
 config/config-x86-common.mak |  2 +-
 lib/{x86 => }/pci.c          |  6 ++++++
 lib/pci.h                    | 22 ++++++++++++++++++++++
 lib/x86/asm/pci.h            | 14 +++-----------
 x86/vmexit.c                 |  2 +-
 5 files changed, 33 insertions(+), 13 deletions(-)
 rename lib/{x86 => }/pci.c (86%)
 create mode 100644 lib/pci.h

diff --git a/config/config-x86-common.mak b/config/config-x86-common.mak
index 4a2746826784c..860cbb0a7db4d 100644
--- a/config/config-x86-common.mak
+++ b/config/config-x86-common.mak
@@ -10,8 +10,8 @@ cflatobjs += lib/x86/apic.o
 cflatobjs += lib/x86/atomic.o
 cflatobjs += lib/x86/desc.o
 cflatobjs += lib/x86/isr.o
-cflatobjs += lib/x86/pci.o
 cflatobjs += lib/x86/acpi.o
+cflatobjs += lib/pci.o
 
 $(libcflat): LDFLAGS += -nostdlib
 $(libcflat): CFLAGS += -ffreestanding -I lib
diff --git a/lib/x86/pci.c b/lib/pci.c
similarity index 86%
rename from lib/x86/pci.c
rename to lib/pci.c
index 7002d80836a4c..0058d70c888d8 100644
--- a/lib/x86/pci.c
+++ b/lib/pci.c
@@ -1,4 +1,10 @@
+/*
+ * Copyright (C) 2013, Red Hat Inc, Michael S. Tsirkin <mst@redhat.com>
+ *
+ * This work is licensed under the terms of the GNU LGPL, version 2.
+ */
 #include <linux/pci_regs.h>
+#include "pci.h"
 #include "asm/pci.h"
 
 /* Scan bus look for a specific device. Only bus 0 scanned for now. */
diff --git a/lib/pci.h b/lib/pci.h
new file mode 100644
index 0000000000000..65fcd9444461c
--- /dev/null
+++ b/lib/pci.h
@@ -0,0 +1,22 @@
+#ifndef PCI_H
+#define PCI_H
+/*
+ * API for scanning a PCI bus for a given device, as well to access
+ * BAR registers.
+ *
+ * Copyright (C) 2013, Red Hat Inc, Michael S. Tsirkin <mst@redhat.com>
+ *
+ * This work is licensed under the terms of the GNU LGPL, version 2.
+ */
+#include "libcflat.h"
+
+typedef uint16_t pcidevaddr_t;
+enum {
+    PCIDEVADDR_INVALID = 0x0
+};
+pcidevaddr_t pci_find_dev(uint16_t vendor_id, uint16_t device_id);
+unsigned long pci_bar_addr(pcidevaddr_t dev, int bar_num);
+bool pci_bar_is_memory(pcidevaddr_t dev, int bar_num);
+bool pci_bar_is_valid(pcidevaddr_t dev, int bar_num);
+
+#endif
diff --git a/lib/x86/asm/pci.h b/lib/x86/asm/pci.h
index 8ad93a87966c6..f7028defb63b2 100644
--- a/lib/x86/asm/pci.h
+++ b/lib/x86/asm/pci.h
@@ -1,18 +1,10 @@
-#ifndef PCI_H
-#define PCI_H
+#ifndef ASM_PCI_H
+#define ASM_PCI_H
 
 #include "libcflat.h"
+#include "pci.h"
 #include "asm/io.h"
 
-typedef uint16_t pcidevaddr_t;
-enum {
-    PCIDEVADDR_INVALID = 0x0
-};
-pcidevaddr_t pci_find_dev(uint16_t vendor_id, uint16_t device_id);
-unsigned long pci_bar_addr(pcidevaddr_t dev, int bar_num);
-bool pci_bar_is_memory(pcidevaddr_t dev, int bar_num);
-bool pci_bar_is_valid(pcidevaddr_t dev, int bar_num);
-
 static inline uint32_t pci_config_read(pcidevaddr_t dev, uint8_t reg)
 {
     uint32_t index = reg | (dev << 8) | (0x1 << 31);
diff --git a/x86/vmexit.c b/x86/vmexit.c
index 61243a9d63c9a..35c6fac747588 100644
--- a/x86/vmexit.c
+++ b/x86/vmexit.c
@@ -2,9 +2,9 @@
 #include "smp.h"
 #include "processor.h"
 #include "atomic.h"
+#include "pci.h"
 #include "x86/vm.h"
 #include "x86/desc.h"
-#include "asm/pci.h"
 #include "x86/acpi.h"
 #include "asm/io.h"
 
-- 
2.4.3

Re: [kvm-unit-tests PATCH 06/11] x86: move x86/pci to the common lib

[Andrew Jones]

On Fri, Jan 15, 2016 at 05:10:11PM +0100, Andrew Jones wrote:
> Signed-off-by: Andrew Jones <drjones@redhat.com>
> ---
>  config/config-x86-common.mak |  2 +-
>  lib/{x86 => }/pci.c          |  6 ++++++
>  lib/pci.h                    | 22 ++++++++++++++++++++++
>  lib/x86/asm/pci.h            | 14 +++-----------
>  x86/vmexit.c                 |  2 +-
>  5 files changed, 33 insertions(+), 13 deletions(-)
>  rename lib/{x86 => }/pci.c (86%)
>  create mode 100644 lib/pci.h

Eh, I should have done this and the last patch differently in order to
properly preserve git-blame history. I also should have added an
asm-generic/pci.h similar to asm-generic/spinlock.h for completeness.

I'll send a v2 now. Sorry for 11 patch spam... mark-thread-read time.

drew

[kvm-unit-tests PATCH 07/11] x86: share pci-testdev hdr in common lib

[Andrew Jones]

Signed-off-by: Andrew Jones <drjones@redhat.com>
---
 lib/pci.h    | 22 +++++++++++++++++++++-
 x86/vmexit.c | 14 ++------------
 2 files changed, 23 insertions(+), 13 deletions(-)

diff --git a/lib/pci.h b/lib/pci.h
index 65fcd9444461c..9e62d120a52d6 100644
--- a/lib/pci.h
+++ b/lib/pci.h
@@ -19,4 +19,24 @@ unsigned long pci_bar_addr(pcidevaddr_t dev, int bar_num);
 bool pci_bar_is_memory(pcidevaddr_t dev, int bar_num);
 bool pci_bar_is_valid(pcidevaddr_t dev, int bar_num);
 
-#endif
+/*
+ * pci-testdev is a driver for the pci-testdev qemu pci device. The
+ * device enables testing mmio and portio exits, and measuring their
+ * speed.
+ */
+#define PCI_VENDOR_ID_REDHAT		0x1b36
+#define PCI_DEVICE_ID_REDHAT_TEST	0x0005
+
+#define PCI_TESTDEV_NUM_BARS		2
+
+struct pci_test_dev_hdr {
+	uint8_t  test;
+	uint8_t  width;
+	uint8_t  pad0[2];
+	uint32_t offset;
+	uint32_t data;
+	uint32_t count;
+	uint8_t  name[];
+};
+
+#endif /* PCI_H */
diff --git a/x86/vmexit.c b/x86/vmexit.c
index 35c6fac747588..7b68896fe9494 100644
--- a/x86/vmexit.c
+++ b/x86/vmexit.c
@@ -134,16 +134,6 @@ static void wr_tsc_adjust_msr(void)
 	wrmsr(MSR_TSC_ADJUST, 0x0);
 }
 
-struct pci_test_dev_hdr {
-    uint8_t test;
-    uint8_t width;
-    uint8_t pad0[2];
-    uint32_t offset;
-    uint32_t data;
-    uint32_t count;
-    uint8_t name[];
-};
-
 static struct pci_test {
 	unsigned iobar;
 	unsigned ioport;
@@ -397,9 +387,9 @@ int main(int ac, char **av)
 	pm_tmr_blk = fadt->pm_tmr_blk;
 	printf("PM timer port is %x\n", pm_tmr_blk);
 
-	pcidev = pci_find_dev(0x1b36, 0x0005);
+	pcidev = pci_find_dev(PCI_VENDOR_ID_REDHAT, PCI_DEVICE_ID_REDHAT_TEST);
 	if (pcidev) {
-		for (i = 0; i < 2; i++) {
+		for (i = 0; i < PCI_TESTDEV_NUM_BARS; i++) {
 			if (!pci_bar_is_valid(pcidev, i)) {
 				continue;
 			}
-- 
2.4.3

[kvm-unit-tests PATCH 08/11] lib/pci: make PCIDEVADDR_INVALID truly invalid

[Andrew Jones]

dev addr 0 is valid, just not for the pci-testdev (since the host
bridge is already there). So, while it's not a problem, let's
"fix" it anyway.

Suggested-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
---
 lib/pci.h    | 2 +-
 x86/vmexit.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/lib/pci.h b/lib/pci.h
index 9e62d120a52d6..9160cfb5950d0 100644
--- a/lib/pci.h
+++ b/lib/pci.h
@@ -12,7 +12,7 @@
 
 typedef uint16_t pcidevaddr_t;
 enum {
-    PCIDEVADDR_INVALID = 0x0
+    PCIDEVADDR_INVALID = 0xffff,
 };
 pcidevaddr_t pci_find_dev(uint16_t vendor_id, uint16_t device_id);
 unsigned long pci_bar_addr(pcidevaddr_t dev, int bar_num);
diff --git a/x86/vmexit.c b/x86/vmexit.c
index 7b68896fe9494..321ebda35b449 100644
--- a/x86/vmexit.c
+++ b/x86/vmexit.c
@@ -388,7 +388,7 @@ int main(int ac, char **av)
 	printf("PM timer port is %x\n", pm_tmr_blk);
 
 	pcidev = pci_find_dev(PCI_VENDOR_ID_REDHAT, PCI_DEVICE_ID_REDHAT_TEST);
-	if (pcidev) {
+	if (pcidev != PCIDEVADDR_INVALID) {
 		for (i = 0; i < PCI_TESTDEV_NUM_BARS; i++) {
 			if (!pci_bar_is_valid(pcidev, i)) {
 				continue;
-- 
2.4.3

[kvm-unit-tests PATCH 09/11] lib: add linux dir for kernel uapi headers

[Andrew Jones]

We needed to import some uapi headers, e.g. lib/arm/asm/uapi-psci.h,
and will need some others, e.g. pci_regs.h, in the future. Create a
linux directory for them in lib so that they can be included with
the familiar <linux/header.h> reference.

(Note, x86 has been cheating. lib/x86/pci.c already includes
 <linux/pci_regs.h>, which it's been getting away with as its include
 paths are less strict than arm's, i.e. it *does* look in /usr/include)

Signed-off-by: Andrew Jones <drjones@redhat.com>
---
 Makefile               |  2 +-
 lib/arm/asm/page.h     |  2 +-
 lib/arm/asm/psci.h     |  2 +-
 lib/arm64/asm/page.h   |  2 +-
 lib/arm64/asm/psci.h   |  2 +-
 lib/asm-generic/page.h |  4 +--
 lib/const.h            | 11 ------
 lib/linux/const.h      | 27 +++++++++++++++
 lib/linux/psci.h       | 90 ++++++++++++++++++++++++++++++++++++++++++++++++++
 9 files changed, 124 insertions(+), 18 deletions(-)
 delete mode 100644 lib/const.h
 create mode 100644 lib/linux/const.h
 create mode 100644 lib/linux/psci.h

diff --git a/Makefile b/Makefile
index 3e60b4f8e4a57..0be2b6670daf6 100644
--- a/Makefile
+++ b/Makefile
@@ -85,7 +85,7 @@ distclean: clean libfdt_clean
 	$(RM) lib/asm config.mak $(TEST_DIR)-run test.log msr.out cscope.*
 	$(RM) -r tests
 
-cscope: common_dirs = lib lib/libfdt lib/asm lib/asm-generic
+cscope: common_dirs = lib lib/libfdt lib/linux lib/asm lib/asm-generic
 cscope:
 	$(RM) ./cscope.*
 	find -L $(TEST_DIR) lib/$(TEST_DIR) lib/$(ARCH) $(common_dirs) -maxdepth 1 \
diff --git a/lib/arm/asm/page.h b/lib/arm/asm/page.h
index 039e2ddfb8e0f..df76969964ed3 100644
--- a/lib/arm/asm/page.h
+++ b/lib/arm/asm/page.h
@@ -6,7 +6,7 @@
  * This work is licensed under the terms of the GNU LGPL, version 2.
  */
 
-#include <const.h>
+#include <linux/const.h>
 
 #define PAGE_SHIFT		12
 #define PAGE_SIZE		(_AC(1,UL) << PAGE_SHIFT)
diff --git a/lib/arm/asm/psci.h b/lib/arm/asm/psci.h
index c5fe78184b5ac..11ac45028d787 100644
--- a/lib/arm/asm/psci.h
+++ b/lib/arm/asm/psci.h
@@ -1,7 +1,7 @@
 #ifndef _ASMARM_PSCI_H_
 #define _ASMARM_PSCI_H_
 #include <libcflat.h>
-#include <asm/uapi-psci.h>
+#include <linux/psci.h>
 
 #define PSCI_INVOKE_ARG_TYPE	u32
 #define PSCI_FN_CPU_ON		PSCI_0_2_FN_CPU_ON
diff --git a/lib/arm64/asm/page.h b/lib/arm64/asm/page.h
index 29ad1f1f720c4..3144e8efcc7ae 100644
--- a/lib/arm64/asm/page.h
+++ b/lib/arm64/asm/page.h
@@ -11,7 +11,7 @@
  * This work is licensed under the terms of the GNU LGPL, version 2.
  */
 
-#include <const.h>
+#include <linux/const.h>
 
 #define PGTABLE_LEVELS		2
 #define VA_BITS			42
diff --git a/lib/arm64/asm/psci.h b/lib/arm64/asm/psci.h
index 940d61d34c05d..0a7d7c854e2b3 100644
--- a/lib/arm64/asm/psci.h
+++ b/lib/arm64/asm/psci.h
@@ -1,7 +1,7 @@
 #ifndef _ASMARM64_PSCI_H_
 #define _ASMARM64_PSCI_H_
 #include <libcflat.h>
-#include <asm/uapi-psci.h>
+#include <linux/psci.h>
 
 #define PSCI_INVOKE_ARG_TYPE	u64
 #define PSCI_FN_CPU_ON		PSCI_0_2_FN64_CPU_ON
diff --git a/lib/asm-generic/page.h b/lib/asm-generic/page.h
index 66c72a62bb0f7..7b8a08bfaacce 100644
--- a/lib/asm-generic/page.h
+++ b/lib/asm-generic/page.h
@@ -9,7 +9,7 @@
  * This work is licensed under the terms of the GNU LGPL, version 2.
  */
 
-#include "const.h"
+#include <linux/const.h>
 
 #define PAGE_SHIFT		12
 #define PAGE_SIZE		(_AC(1,UL) << PAGE_SHIFT)
@@ -24,6 +24,6 @@
 #define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
 #define pfn_to_virt(pfn)	__va((pfn) << PAGE_SHIFT)
 
-#endif /* __ASSEMBLY__ */
+#endif /* !__ASSEMBLY__ */
 
 #endif /* _ASM_GENERIC_PAGE_H_ */
diff --git a/lib/const.h b/lib/const.h
deleted file mode 100644
index 5cd94d7067541..0000000000000
--- a/lib/const.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _CONST_H_
-#define _CONST_H_
-#ifdef __ASSEMBLY__
-#define _AC(X,Y)	X
-#define _AT(T,X)	X
-#else
-#define __AC(X,Y)	(X##Y)
-#define _AC(X,Y)	__AC(X,Y)
-#define _AT(T,X)	((T)(X))
-#endif
-#endif
diff --git a/lib/linux/const.h b/lib/linux/const.h
new file mode 100644
index 0000000000000..c872bfd25e139
--- /dev/null
+++ b/lib/linux/const.h
@@ -0,0 +1,27 @@
+/* const.h: Macros for dealing with constants.  */
+
+#ifndef _LINUX_CONST_H
+#define _LINUX_CONST_H
+
+/* Some constant macros are used in both assembler and
+ * C code.  Therefore we cannot annotate them always with
+ * 'UL' and other type specifiers unilaterally.  We
+ * use the following macros to deal with this.
+ *
+ * Similarly, _AT() will cast an expression with a type in C, but
+ * leave it unchanged in asm.
+ */
+
+#ifdef __ASSEMBLY__
+#define _AC(X,Y)	X
+#define _AT(T,X)	X
+#else
+#define __AC(X,Y)	(X##Y)
+#define _AC(X,Y)	__AC(X,Y)
+#define _AT(T,X)	((T)(X))
+#endif
+
+#define _BITUL(x)	(_AC(1,UL) << (x))
+#define _BITULL(x)	(_AC(1,ULL) << (x))
+
+#endif /* !(_LINUX_CONST_H) */
diff --git a/lib/linux/psci.h b/lib/linux/psci.h
new file mode 100644
index 0000000000000..5a7676307b44d
--- /dev/null
+++ b/lib/linux/psci.h
@@ -0,0 +1,90 @@
+/*
+ * ARM Power State and Coordination Interface (PSCI) header
+ *
+ * This header holds common PSCI defines and macros shared
+ * by: ARM kernel, ARM64 kernel, KVM ARM/ARM64 and user space.
+ *
+ * Copyright (C) 2014 Linaro Ltd.
+ * Author: Anup Patel <anup.patel@linaro.org>
+ */
+
+#ifndef _LINUX_PSCI_H
+#define _LINUX_PSCI_H
+
+/*
+ * PSCI v0.1 interface
+ *
+ * The PSCI v0.1 function numbers are implementation defined.
+ *
+ * Only PSCI return values such as: SUCCESS, NOT_SUPPORTED,
+ * INVALID_PARAMS, and DENIED defined below are applicable
+ * to PSCI v0.1.
+ */
+
+/* PSCI v0.2 interface */
+#define PSCI_0_2_FN_BASE			0x84000000
+#define PSCI_0_2_FN(n)				(PSCI_0_2_FN_BASE + (n))
+#define PSCI_0_2_64BIT				0x40000000
+#define PSCI_0_2_FN64_BASE			\
+					(PSCI_0_2_FN_BASE + PSCI_0_2_64BIT)
+#define PSCI_0_2_FN64(n)			(PSCI_0_2_FN64_BASE + (n))
+
+#define PSCI_0_2_FN_PSCI_VERSION		PSCI_0_2_FN(0)
+#define PSCI_0_2_FN_CPU_SUSPEND			PSCI_0_2_FN(1)
+#define PSCI_0_2_FN_CPU_OFF			PSCI_0_2_FN(2)
+#define PSCI_0_2_FN_CPU_ON			PSCI_0_2_FN(3)
+#define PSCI_0_2_FN_AFFINITY_INFO		PSCI_0_2_FN(4)
+#define PSCI_0_2_FN_MIGRATE			PSCI_0_2_FN(5)
+#define PSCI_0_2_FN_MIGRATE_INFO_TYPE		PSCI_0_2_FN(6)
+#define PSCI_0_2_FN_MIGRATE_INFO_UP_CPU		PSCI_0_2_FN(7)
+#define PSCI_0_2_FN_SYSTEM_OFF			PSCI_0_2_FN(8)
+#define PSCI_0_2_FN_SYSTEM_RESET		PSCI_0_2_FN(9)
+
+#define PSCI_0_2_FN64_CPU_SUSPEND		PSCI_0_2_FN64(1)
+#define PSCI_0_2_FN64_CPU_ON			PSCI_0_2_FN64(3)
+#define PSCI_0_2_FN64_AFFINITY_INFO		PSCI_0_2_FN64(4)
+#define PSCI_0_2_FN64_MIGRATE			PSCI_0_2_FN64(5)
+#define PSCI_0_2_FN64_MIGRATE_INFO_UP_CPU	PSCI_0_2_FN64(7)
+
+/* PSCI v0.2 power state encoding for CPU_SUSPEND function */
+#define PSCI_0_2_POWER_STATE_ID_MASK		0xffff
+#define PSCI_0_2_POWER_STATE_ID_SHIFT		0
+#define PSCI_0_2_POWER_STATE_TYPE_SHIFT		16
+#define PSCI_0_2_POWER_STATE_TYPE_MASK		\
+				(0x1 << PSCI_0_2_POWER_STATE_TYPE_SHIFT)
+#define PSCI_0_2_POWER_STATE_AFFL_SHIFT		24
+#define PSCI_0_2_POWER_STATE_AFFL_MASK		\
+				(0x3 << PSCI_0_2_POWER_STATE_AFFL_SHIFT)
+
+/* PSCI v0.2 affinity level state returned by AFFINITY_INFO */
+#define PSCI_0_2_AFFINITY_LEVEL_ON		0
+#define PSCI_0_2_AFFINITY_LEVEL_OFF		1
+#define PSCI_0_2_AFFINITY_LEVEL_ON_PENDING	2
+
+/* PSCI v0.2 multicore support in Trusted OS returned by MIGRATE_INFO_TYPE */
+#define PSCI_0_2_TOS_UP_MIGRATE			0
+#define PSCI_0_2_TOS_UP_NO_MIGRATE		1
+#define PSCI_0_2_TOS_MP				2
+
+/* PSCI version decoding (independent of PSCI version) */
+#define PSCI_VERSION_MAJOR_SHIFT		16
+#define PSCI_VERSION_MINOR_MASK			\
+		((1U << PSCI_VERSION_MAJOR_SHIFT) - 1)
+#define PSCI_VERSION_MAJOR_MASK			~PSCI_VERSION_MINOR_MASK
+#define PSCI_VERSION_MAJOR(ver)			\
+		(((ver) & PSCI_VERSION_MAJOR_MASK) >> PSCI_VERSION_MAJOR_SHIFT)
+#define PSCI_VERSION_MINOR(ver)			\
+		((ver) & PSCI_VERSION_MINOR_MASK)
+
+/* PSCI return values (inclusive of all PSCI versions) */
+#define PSCI_RET_SUCCESS			0
+#define PSCI_RET_NOT_SUPPORTED			-1
+#define PSCI_RET_INVALID_PARAMS			-2
+#define PSCI_RET_DENIED				-3
+#define PSCI_RET_ALREADY_ON			-4
+#define PSCI_RET_ON_PENDING			-5
+#define PSCI_RET_INTERNAL_FAILURE		-6
+#define PSCI_RET_NOT_PRESENT			-7
+#define PSCI_RET_DISABLED			-8
+
+#endif /* _LINUX_PSCI_H */
-- 
2.4.3

[kvm-unit-tests PATCH 10/11] Revert "arm/arm64: import include/uapi/linux/psci.h"

[Andrew Jones]

The previous patch allows us to "unimport" this header now.

This reverts commit 7bc9f5e757bfa5c5a5202816404444fcf47a14b3.

Signed-off-by: Andrew Jones <drjones@redhat.com>
---
 lib/arm/asm/uapi-psci.h   | 73 -----------------------------------------------
 lib/arm64/asm/uapi-psci.h |  1 -
 2 files changed, 74 deletions(-)
 delete mode 100644 lib/arm/asm/uapi-psci.h
 delete mode 100644 lib/arm64/asm/uapi-psci.h

diff --git a/lib/arm/asm/uapi-psci.h b/lib/arm/asm/uapi-psci.h
deleted file mode 100644
index 5c6fada2b5105..0000000000000
--- a/lib/arm/asm/uapi-psci.h
+++ /dev/null
@@ -1,73 +0,0 @@
-#ifndef _ASMARM_UAPI_PSCI_H_
-#define _ASMARM_UAPI_PSCI_H_
-/*
- * From include/uapi/linux/psci.h
- */
-
-/* PSCI v0.2 interface */
-#define PSCI_0_2_FN_BASE			0x84000000
-#define PSCI_0_2_FN(n)				(PSCI_0_2_FN_BASE + (n))
-#define PSCI_0_2_64BIT				0x40000000
-#define PSCI_0_2_FN64_BASE			\
-					(PSCI_0_2_FN_BASE + PSCI_0_2_64BIT)
-#define PSCI_0_2_FN64(n)			(PSCI_0_2_FN64_BASE + (n))
-
-#define PSCI_0_2_FN_PSCI_VERSION		PSCI_0_2_FN(0)
-#define PSCI_0_2_FN_CPU_SUSPEND			PSCI_0_2_FN(1)
-#define PSCI_0_2_FN_CPU_OFF			PSCI_0_2_FN(2)
-#define PSCI_0_2_FN_CPU_ON			PSCI_0_2_FN(3)
-#define PSCI_0_2_FN_AFFINITY_INFO		PSCI_0_2_FN(4)
-#define PSCI_0_2_FN_MIGRATE			PSCI_0_2_FN(5)
-#define PSCI_0_2_FN_MIGRATE_INFO_TYPE		PSCI_0_2_FN(6)
-#define PSCI_0_2_FN_MIGRATE_INFO_UP_CPU		PSCI_0_2_FN(7)
-#define PSCI_0_2_FN_SYSTEM_OFF			PSCI_0_2_FN(8)
-#define PSCI_0_2_FN_SYSTEM_RESET		PSCI_0_2_FN(9)
-
-#define PSCI_0_2_FN64_CPU_SUSPEND		PSCI_0_2_FN64(1)
-#define PSCI_0_2_FN64_CPU_ON			PSCI_0_2_FN64(3)
-#define PSCI_0_2_FN64_AFFINITY_INFO		PSCI_0_2_FN64(4)
-#define PSCI_0_2_FN64_MIGRATE			PSCI_0_2_FN64(5)
-#define PSCI_0_2_FN64_MIGRATE_INFO_UP_CPU	PSCI_0_2_FN64(7)
-
-/* PSCI v0.2 power state encoding for CPU_SUSPEND function */
-#define PSCI_0_2_POWER_STATE_ID_MASK		0xffff
-#define PSCI_0_2_POWER_STATE_ID_SHIFT		0
-#define PSCI_0_2_POWER_STATE_TYPE_SHIFT		16
-#define PSCI_0_2_POWER_STATE_TYPE_MASK		\
-				(0x1 << PSCI_0_2_POWER_STATE_TYPE_SHIFT)
-#define PSCI_0_2_POWER_STATE_AFFL_SHIFT		24
-#define PSCI_0_2_POWER_STATE_AFFL_MASK		\
-				(0x3 << PSCI_0_2_POWER_STATE_AFFL_SHIFT)
-
-/* PSCI v0.2 affinity level state returned by AFFINITY_INFO */
-#define PSCI_0_2_AFFINITY_LEVEL_ON		0
-#define PSCI_0_2_AFFINITY_LEVEL_OFF		1
-#define PSCI_0_2_AFFINITY_LEVEL_ON_PENDING	2
-
-/* PSCI v0.2 multicore support in Trusted OS returned by MIGRATE_INFO_TYPE */
-#define PSCI_0_2_TOS_UP_MIGRATE			0
-#define PSCI_0_2_TOS_UP_NO_MIGRATE		1
-#define PSCI_0_2_TOS_MP				2
-
-/* PSCI version decoding (independent of PSCI version) */
-#define PSCI_VERSION_MAJOR_SHIFT		16
-#define PSCI_VERSION_MINOR_MASK			\
-		((1U << PSCI_VERSION_MAJOR_SHIFT) - 1)
-#define PSCI_VERSION_MAJOR_MASK			~PSCI_VERSION_MINOR_MASK
-#define PSCI_VERSION_MAJOR(ver)			\
-		(((ver) & PSCI_VERSION_MAJOR_MASK) >> PSCI_VERSION_MAJOR_SHIFT)
-#define PSCI_VERSION_MINOR(ver)			\
-		((ver) & PSCI_VERSION_MINOR_MASK)
-
-/* PSCI return values (inclusive of all PSCI versions) */
-#define PSCI_RET_SUCCESS			0
-#define PSCI_RET_NOT_SUPPORTED			-1
-#define PSCI_RET_INVALID_PARAMS			-2
-#define PSCI_RET_DENIED				-3
-#define PSCI_RET_ALREADY_ON			-4
-#define PSCI_RET_ON_PENDING			-5
-#define PSCI_RET_INTERNAL_FAILURE		-6
-#define PSCI_RET_NOT_PRESENT			-7
-#define PSCI_RET_DISABLED			-8
-
-#endif /* _ASMARM_UAPI_PSCI_H_ */
diff --git a/lib/arm64/asm/uapi-psci.h b/lib/arm64/asm/uapi-psci.h
deleted file mode 100644
index 83d018f954e4c..0000000000000
--- a/lib/arm64/asm/uapi-psci.h
+++ /dev/null
@@ -1 +0,0 @@
-#include "../../arm/asm/uapi-psci.h"
-- 
2.4.3

[kvm-unit-tests PATCH 11/11] lib/linux: import pci_regs.h

[Andrew Jones]

Signed-off-by: Andrew Jones <drjones@redhat.com>
---
 lib/linux/pci_regs.h | 949 +++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 949 insertions(+)
 create mode 100644 lib/linux/pci_regs.h

diff --git a/lib/linux/pci_regs.h b/lib/linux/pci_regs.h
new file mode 100644
index 0000000000000..1becea86c73c9
--- /dev/null
+++ b/lib/linux/pci_regs.h
@@ -0,0 +1,949 @@
+/*
+ *	pci_regs.h
+ *
+ *	PCI standard defines
+ *	Copyright 1994, Drew Eckhardt
+ *	Copyright 1997--1999 Martin Mares <mj@ucw.cz>
+ *
+ *	For more information, please consult the following manuals (look at
+ *	http://www.pcisig.com/ for how to get them):
+ *
+ *	PCI BIOS Specification
+ *	PCI Local Bus Specification
+ *	PCI to PCI Bridge Specification
+ *	PCI System Design Guide
+ *
+ *	For HyperTransport information, please consult the following manuals
+ *	from http://www.hypertransport.org
+ *
+ *	The HyperTransport I/O Link Specification
+ */
+
+#ifndef LINUX_PCI_REGS_H
+#define LINUX_PCI_REGS_H
+
+/*
+ * Under PCI, each device has 256 bytes of configuration address space,
+ * of which the first 64 bytes are standardized as follows:
+ */
+#define PCI_STD_HEADER_SIZEOF	64
+#define PCI_VENDOR_ID		0x00	/* 16 bits */
+#define PCI_DEVICE_ID		0x02	/* 16 bits */
+#define PCI_COMMAND		0x04	/* 16 bits */
+#define  PCI_COMMAND_IO		0x1	/* Enable response in I/O space */
+#define  PCI_COMMAND_MEMORY	0x2	/* Enable response in Memory space */
+#define  PCI_COMMAND_MASTER	0x4	/* Enable bus mastering */
+#define  PCI_COMMAND_SPECIAL	0x8	/* Enable response to special cycles */
+#define  PCI_COMMAND_INVALIDATE	0x10	/* Use memory write and invalidate */
+#define  PCI_COMMAND_VGA_PALETTE 0x20	/* Enable palette snooping */
+#define  PCI_COMMAND_PARITY	0x40	/* Enable parity checking */
+#define  PCI_COMMAND_WAIT	0x80	/* Enable address/data stepping */
+#define  PCI_COMMAND_SERR	0x100	/* Enable SERR */
+#define  PCI_COMMAND_FAST_BACK	0x200	/* Enable back-to-back writes */
+#define  PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */
+
+#define PCI_STATUS		0x06	/* 16 bits */
+#define  PCI_STATUS_INTERRUPT	0x08	/* Interrupt status */
+#define  PCI_STATUS_CAP_LIST	0x10	/* Support Capability List */
+#define  PCI_STATUS_66MHZ	0x20	/* Support 66 MHz PCI 2.1 bus */
+#define  PCI_STATUS_UDF		0x40	/* Support User Definable Features [obsolete] */
+#define  PCI_STATUS_FAST_BACK	0x80	/* Accept fast-back to back */
+#define  PCI_STATUS_PARITY	0x100	/* Detected parity error */
+#define  PCI_STATUS_DEVSEL_MASK	0x600	/* DEVSEL timing */
+#define  PCI_STATUS_DEVSEL_FAST		0x000
+#define  PCI_STATUS_DEVSEL_MEDIUM	0x200
+#define  PCI_STATUS_DEVSEL_SLOW		0x400
+#define  PCI_STATUS_SIG_TARGET_ABORT	0x800 /* Set on target abort */
+#define  PCI_STATUS_REC_TARGET_ABORT	0x1000 /* Master ack of " */
+#define  PCI_STATUS_REC_MASTER_ABORT	0x2000 /* Set on master abort */
+#define  PCI_STATUS_SIG_SYSTEM_ERROR	0x4000 /* Set when we drive SERR */
+#define  PCI_STATUS_DETECTED_PARITY	0x8000 /* Set on parity error */
+
+#define PCI_CLASS_REVISION	0x08	/* High 24 bits are class, low 8 revision */
+#define PCI_REVISION_ID		0x08	/* Revision ID */
+#define PCI_CLASS_PROG		0x09	/* Reg. Level Programming Interface */
+#define PCI_CLASS_DEVICE	0x0a	/* Device class */
+
+#define PCI_CACHE_LINE_SIZE	0x0c	/* 8 bits */
+#define PCI_LATENCY_TIMER	0x0d	/* 8 bits */
+#define PCI_HEADER_TYPE		0x0e	/* 8 bits */
+#define  PCI_HEADER_TYPE_NORMAL		0
+#define  PCI_HEADER_TYPE_BRIDGE		1
+#define  PCI_HEADER_TYPE_CARDBUS	2
+
+#define PCI_BIST		0x0f	/* 8 bits */
+#define  PCI_BIST_CODE_MASK	0x0f	/* Return result */
+#define  PCI_BIST_START		0x40	/* 1 to start BIST, 2 secs or less */
+#define  PCI_BIST_CAPABLE	0x80	/* 1 if BIST capable */
+
+/*
+ * Base addresses specify locations in memory or I/O space.
+ * Decoded size can be determined by writing a value of
+ * 0xffffffff to the register, and reading it back.  Only
+ * 1 bits are decoded.
+ */
+#define PCI_BASE_ADDRESS_0	0x10	/* 32 bits */
+#define PCI_BASE_ADDRESS_1	0x14	/* 32 bits [htype 0,1 only] */
+#define PCI_BASE_ADDRESS_2	0x18	/* 32 bits [htype 0 only] */
+#define PCI_BASE_ADDRESS_3	0x1c	/* 32 bits */
+#define PCI_BASE_ADDRESS_4	0x20	/* 32 bits */
+#define PCI_BASE_ADDRESS_5	0x24	/* 32 bits */
+#define  PCI_BASE_ADDRESS_SPACE		0x01	/* 0 = memory, 1 = I/O */
+#define  PCI_BASE_ADDRESS_SPACE_IO	0x01
+#define  PCI_BASE_ADDRESS_SPACE_MEMORY	0x00
+#define  PCI_BASE_ADDRESS_MEM_TYPE_MASK	0x06
+#define  PCI_BASE_ADDRESS_MEM_TYPE_32	0x00	/* 32 bit address */
+#define  PCI_BASE_ADDRESS_MEM_TYPE_1M	0x02	/* Below 1M [obsolete] */
+#define  PCI_BASE_ADDRESS_MEM_TYPE_64	0x04	/* 64 bit address */
+#define  PCI_BASE_ADDRESS_MEM_PREFETCH	0x08	/* prefetchable? */
+#define  PCI_BASE_ADDRESS_MEM_MASK	(~0x0fUL)
+#define  PCI_BASE_ADDRESS_IO_MASK	(~0x03UL)
+/* bit 1 is reserved if address_space = 1 */
+
+/* Header type 0 (normal devices) */
+#define PCI_CARDBUS_CIS		0x28
+#define PCI_SUBSYSTEM_VENDOR_ID	0x2c
+#define PCI_SUBSYSTEM_ID	0x2e
+#define PCI_ROM_ADDRESS		0x30	/* Bits 31..11 are address, 10..1 reserved */
+#define  PCI_ROM_ADDRESS_ENABLE	0x01
+#define PCI_ROM_ADDRESS_MASK	(~0x7ffUL)
+
+#define PCI_CAPABILITY_LIST	0x34	/* Offset of first capability list entry */
+
+/* 0x35-0x3b are reserved */
+#define PCI_INTERRUPT_LINE	0x3c	/* 8 bits */
+#define PCI_INTERRUPT_PIN	0x3d	/* 8 bits */
+#define PCI_MIN_GNT		0x3e	/* 8 bits */
+#define PCI_MAX_LAT		0x3f	/* 8 bits */
+
+/* Header type 1 (PCI-to-PCI bridges) */
+#define PCI_PRIMARY_BUS		0x18	/* Primary bus number */
+#define PCI_SECONDARY_BUS	0x19	/* Secondary bus number */
+#define PCI_SUBORDINATE_BUS	0x1a	/* Highest bus number behind the bridge */
+#define PCI_SEC_LATENCY_TIMER	0x1b	/* Latency timer for secondary interface */
+#define PCI_IO_BASE		0x1c	/* I/O range behind the bridge */
+#define PCI_IO_LIMIT		0x1d
+#define  PCI_IO_RANGE_TYPE_MASK	0x0fUL	/* I/O bridging type */
+#define  PCI_IO_RANGE_TYPE_16	0x00
+#define  PCI_IO_RANGE_TYPE_32	0x01
+#define  PCI_IO_RANGE_MASK	(~0x0fUL) /* Standard 4K I/O windows */
+#define  PCI_IO_1K_RANGE_MASK	(~0x03UL) /* Intel 1K I/O windows */
+#define PCI_SEC_STATUS		0x1e	/* Secondary status register, only bit 14 used */
+#define PCI_MEMORY_BASE		0x20	/* Memory range behind */
+#define PCI_MEMORY_LIMIT	0x22
+#define  PCI_MEMORY_RANGE_TYPE_MASK 0x0fUL
+#define  PCI_MEMORY_RANGE_MASK	(~0x0fUL)
+#define PCI_PREF_MEMORY_BASE	0x24	/* Prefetchable memory range behind */
+#define PCI_PREF_MEMORY_LIMIT	0x26
+#define  PCI_PREF_RANGE_TYPE_MASK 0x0fUL
+#define  PCI_PREF_RANGE_TYPE_32	0x00
+#define  PCI_PREF_RANGE_TYPE_64	0x01
+#define  PCI_PREF_RANGE_MASK	(~0x0fUL)
+#define PCI_PREF_BASE_UPPER32	0x28	/* Upper half of prefetchable memory range */
+#define PCI_PREF_LIMIT_UPPER32	0x2c
+#define PCI_IO_BASE_UPPER16	0x30	/* Upper half of I/O addresses */
+#define PCI_IO_LIMIT_UPPER16	0x32
+/* 0x34 same as for htype 0 */
+/* 0x35-0x3b is reserved */
+#define PCI_ROM_ADDRESS1	0x38	/* Same as PCI_ROM_ADDRESS, but for htype 1 */
+/* 0x3c-0x3d are same as for htype 0 */
+#define PCI_BRIDGE_CONTROL	0x3e
+#define  PCI_BRIDGE_CTL_PARITY	0x01	/* Enable parity detection on secondary interface */
+#define  PCI_BRIDGE_CTL_SERR	0x02	/* The same for SERR forwarding */
+#define  PCI_BRIDGE_CTL_ISA	0x04	/* Enable ISA mode */
+#define  PCI_BRIDGE_CTL_VGA	0x08	/* Forward VGA addresses */
+#define  PCI_BRIDGE_CTL_MASTER_ABORT	0x20  /* Report master aborts */
+#define  PCI_BRIDGE_CTL_BUS_RESET	0x40	/* Secondary bus reset */
+#define  PCI_BRIDGE_CTL_FAST_BACK	0x80	/* Fast Back2Back enabled on secondary interface */
+
+/* Header type 2 (CardBus bridges) */
+#define PCI_CB_CAPABILITY_LIST	0x14
+/* 0x15 reserved */
+#define PCI_CB_SEC_STATUS	0x16	/* Secondary status */
+#define PCI_CB_PRIMARY_BUS	0x18	/* PCI bus number */
+#define PCI_CB_CARD_BUS		0x19	/* CardBus bus number */
+#define PCI_CB_SUBORDINATE_BUS	0x1a	/* Subordinate bus number */
+#define PCI_CB_LATENCY_TIMER	0x1b	/* CardBus latency timer */
+#define PCI_CB_MEMORY_BASE_0	0x1c
+#define PCI_CB_MEMORY_LIMIT_0	0x20
+#define PCI_CB_MEMORY_BASE_1	0x24
+#define PCI_CB_MEMORY_LIMIT_1	0x28
+#define PCI_CB_IO_BASE_0	0x2c
+#define PCI_CB_IO_BASE_0_HI	0x2e
+#define PCI_CB_IO_LIMIT_0	0x30
+#define PCI_CB_IO_LIMIT_0_HI	0x32
+#define PCI_CB_IO_BASE_1	0x34
+#define PCI_CB_IO_BASE_1_HI	0x36
+#define PCI_CB_IO_LIMIT_1	0x38
+#define PCI_CB_IO_LIMIT_1_HI	0x3a
+#define  PCI_CB_IO_RANGE_MASK	(~0x03UL)
+/* 0x3c-0x3d are same as for htype 0 */
+#define PCI_CB_BRIDGE_CONTROL	0x3e
+#define  PCI_CB_BRIDGE_CTL_PARITY	0x01	/* Similar to standard bridge control register */
+#define  PCI_CB_BRIDGE_CTL_SERR		0x02
+#define  PCI_CB_BRIDGE_CTL_ISA		0x04
+#define  PCI_CB_BRIDGE_CTL_VGA		0x08
+#define  PCI_CB_BRIDGE_CTL_MASTER_ABORT	0x20
+#define  PCI_CB_BRIDGE_CTL_CB_RESET	0x40	/* CardBus reset */
+#define  PCI_CB_BRIDGE_CTL_16BIT_INT	0x80	/* Enable interrupt for 16-bit cards */
+#define  PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100	/* Prefetch enable for both memory regions */
+#define  PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 0x200
+#define  PCI_CB_BRIDGE_CTL_POST_WRITES	0x400
+#define PCI_CB_SUBSYSTEM_VENDOR_ID	0x40
+#define PCI_CB_SUBSYSTEM_ID		0x42
+#define PCI_CB_LEGACY_MODE_BASE		0x44	/* 16-bit PC Card legacy mode base address (ExCa) */
+/* 0x48-0x7f reserved */
+
+/* Capability lists */
+
+#define PCI_CAP_LIST_ID		0	/* Capability ID */
+#define  PCI_CAP_ID_PM		0x01	/* Power Management */
+#define  PCI_CAP_ID_AGP		0x02	/* Accelerated Graphics Port */
+#define  PCI_CAP_ID_VPD		0x03	/* Vital Product Data */
+#define  PCI_CAP_ID_SLOTID	0x04	/* Slot Identification */
+#define  PCI_CAP_ID_MSI		0x05	/* Message Signalled Interrupts */
+#define  PCI_CAP_ID_CHSWP	0x06	/* CompactPCI HotSwap */
+#define  PCI_CAP_ID_PCIX	0x07	/* PCI-X */
+#define  PCI_CAP_ID_HT		0x08	/* HyperTransport */
+#define  PCI_CAP_ID_VNDR	0x09	/* Vendor-Specific */
+#define  PCI_CAP_ID_DBG		0x0A	/* Debug port */
+#define  PCI_CAP_ID_CCRC	0x0B	/* CompactPCI Central Resource Control */
+#define  PCI_CAP_ID_SHPC	0x0C	/* PCI Standard Hot-Plug Controller */
+#define  PCI_CAP_ID_SSVID	0x0D	/* Bridge subsystem vendor/device ID */
+#define  PCI_CAP_ID_AGP3	0x0E	/* AGP Target PCI-PCI bridge */
+#define  PCI_CAP_ID_SECDEV	0x0F	/* Secure Device */
+#define  PCI_CAP_ID_EXP		0x10	/* PCI Express */
+#define  PCI_CAP_ID_MSIX	0x11	/* MSI-X */
+#define  PCI_CAP_ID_SATA	0x12	/* SATA Data/Index Conf. */
+#define  PCI_CAP_ID_AF		0x13	/* PCI Advanced Features */
+#define  PCI_CAP_ID_EA		0x14	/* PCI Enhanced Allocation */
+#define  PCI_CAP_ID_MAX		PCI_CAP_ID_EA
+#define PCI_CAP_LIST_NEXT	1	/* Next capability in the list */
+#define PCI_CAP_FLAGS		2	/* Capability defined flags (16 bits) */
+#define PCI_CAP_SIZEOF		4
+
+/* Power Management Registers */
+
+#define PCI_PM_PMC		2	/* PM Capabilities Register */
+#define  PCI_PM_CAP_VER_MASK	0x0007	/* Version */
+#define  PCI_PM_CAP_PME_CLOCK	0x0008	/* PME clock required */
+#define  PCI_PM_CAP_RESERVED    0x0010  /* Reserved field */
+#define  PCI_PM_CAP_DSI		0x0020	/* Device specific initialization */
+#define  PCI_PM_CAP_AUX_POWER	0x01C0	/* Auxiliary power support mask */
+#define  PCI_PM_CAP_D1		0x0200	/* D1 power state support */
+#define  PCI_PM_CAP_D2		0x0400	/* D2 power state support */
+#define  PCI_PM_CAP_PME		0x0800	/* PME pin supported */
+#define  PCI_PM_CAP_PME_MASK	0xF800	/* PME Mask of all supported states */
+#define  PCI_PM_CAP_PME_D0	0x0800	/* PME# from D0 */
+#define  PCI_PM_CAP_PME_D1	0x1000	/* PME# from D1 */
+#define  PCI_PM_CAP_PME_D2	0x2000	/* PME# from D2 */
+#define  PCI_PM_CAP_PME_D3	0x4000	/* PME# from D3 (hot) */
+#define  PCI_PM_CAP_PME_D3cold	0x8000	/* PME# from D3 (cold) */
+#define  PCI_PM_CAP_PME_SHIFT	11	/* Start of the PME Mask in PMC */
+#define PCI_PM_CTRL		4	/* PM control and status register */
+#define  PCI_PM_CTRL_STATE_MASK	0x0003	/* Current power state (D0 to D3) */
+#define  PCI_PM_CTRL_NO_SOFT_RESET	0x0008	/* No reset for D3hot->D0 */
+#define  PCI_PM_CTRL_PME_ENABLE	0x0100	/* PME pin enable */
+#define  PCI_PM_CTRL_DATA_SEL_MASK	0x1e00	/* Data select (??) */
+#define  PCI_PM_CTRL_DATA_SCALE_MASK	0x6000	/* Data scale (??) */
+#define  PCI_PM_CTRL_PME_STATUS	0x8000	/* PME pin status */
+#define PCI_PM_PPB_EXTENSIONS	6	/* PPB support extensions (??) */
+#define  PCI_PM_PPB_B2_B3	0x40	/* Stop clock when in D3hot (??) */
+#define  PCI_PM_BPCC_ENABLE	0x80	/* Bus power/clock control enable (??) */
+#define PCI_PM_DATA_REGISTER	7	/* (??) */
+#define PCI_PM_SIZEOF		8
+
+/* AGP registers */
+
+#define PCI_AGP_VERSION		2	/* BCD version number */
+#define PCI_AGP_RFU		3	/* Rest of capability flags */
+#define PCI_AGP_STATUS		4	/* Status register */
+#define  PCI_AGP_STATUS_RQ_MASK	0xff000000	/* Maximum number of requests - 1 */
+#define  PCI_AGP_STATUS_SBA	0x0200	/* Sideband addressing supported */
+#define  PCI_AGP_STATUS_64BIT	0x0020	/* 64-bit addressing supported */
+#define  PCI_AGP_STATUS_FW	0x0010	/* FW transfers supported */
+#define  PCI_AGP_STATUS_RATE4	0x0004	/* 4x transfer rate supported */
+#define  PCI_AGP_STATUS_RATE2	0x0002	/* 2x transfer rate supported */
+#define  PCI_AGP_STATUS_RATE1	0x0001	/* 1x transfer rate supported */
+#define PCI_AGP_COMMAND		8	/* Control register */
+#define  PCI_AGP_COMMAND_RQ_MASK 0xff000000  /* Master: Maximum number of requests */
+#define  PCI_AGP_COMMAND_SBA	0x0200	/* Sideband addressing enabled */
+#define  PCI_AGP_COMMAND_AGP	0x0100	/* Allow processing of AGP transactions */
+#define  PCI_AGP_COMMAND_64BIT	0x0020	/* Allow processing of 64-bit addresses */
+#define  PCI_AGP_COMMAND_FW	0x0010	/* Force FW transfers */
+#define  PCI_AGP_COMMAND_RATE4	0x0004	/* Use 4x rate */
+#define  PCI_AGP_COMMAND_RATE2	0x0002	/* Use 2x rate */
+#define  PCI_AGP_COMMAND_RATE1	0x0001	/* Use 1x rate */
+#define PCI_AGP_SIZEOF		12
+
+/* Vital Product Data */
+
+#define PCI_VPD_ADDR		2	/* Address to access (15 bits!) */
+#define  PCI_VPD_ADDR_MASK	0x7fff	/* Address mask */
+#define  PCI_VPD_ADDR_F		0x8000	/* Write 0, 1 indicates completion */
+#define PCI_VPD_DATA		4	/* 32-bits of data returned here */
+#define PCI_CAP_VPD_SIZEOF	8
+
+/* Slot Identification */
+
+#define PCI_SID_ESR		2	/* Expansion Slot Register */
+#define  PCI_SID_ESR_NSLOTS	0x1f	/* Number of expansion slots available */
+#define  PCI_SID_ESR_FIC	0x20	/* First In Chassis Flag */
+#define PCI_SID_CHASSIS_NR	3	/* Chassis Number */
+
+/* Message Signalled Interrupts registers */
+
+#define PCI_MSI_FLAGS		2	/* Message Control */
+#define  PCI_MSI_FLAGS_ENABLE	0x0001	/* MSI feature enabled */
+#define  PCI_MSI_FLAGS_QMASK	0x000e	/* Maximum queue size available */
+#define  PCI_MSI_FLAGS_QSIZE	0x0070	/* Message queue size configured */
+#define  PCI_MSI_FLAGS_64BIT	0x0080	/* 64-bit addresses allowed */
+#define  PCI_MSI_FLAGS_MASKBIT	0x0100	/* Per-vector masking capable */
+#define PCI_MSI_RFU		3	/* Rest of capability flags */
+#define PCI_MSI_ADDRESS_LO	4	/* Lower 32 bits */
+#define PCI_MSI_ADDRESS_HI	8	/* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */
+#define PCI_MSI_DATA_32		8	/* 16 bits of data for 32-bit devices */
+#define PCI_MSI_MASK_32		12	/* Mask bits register for 32-bit devices */
+#define PCI_MSI_PENDING_32	16	/* Pending intrs for 32-bit devices */
+#define PCI_MSI_DATA_64		12	/* 16 bits of data for 64-bit devices */
+#define PCI_MSI_MASK_64		16	/* Mask bits register for 64-bit devices */
+#define PCI_MSI_PENDING_64	20	/* Pending intrs for 64-bit devices */
+
+/* MSI-X registers */
+#define PCI_MSIX_FLAGS		2	/* Message Control */
+#define  PCI_MSIX_FLAGS_QSIZE	0x07FF	/* Table size */
+#define  PCI_MSIX_FLAGS_MASKALL	0x4000	/* Mask all vectors for this function */
+#define  PCI_MSIX_FLAGS_ENABLE	0x8000	/* MSI-X enable */
+#define PCI_MSIX_TABLE		4	/* Table offset */
+#define  PCI_MSIX_TABLE_BIR	0x00000007 /* BAR index */
+#define  PCI_MSIX_TABLE_OFFSET	0xfffffff8 /* Offset into specified BAR */
+#define PCI_MSIX_PBA		8	/* Pending Bit Array offset */
+#define  PCI_MSIX_PBA_BIR	0x00000007 /* BAR index */
+#define  PCI_MSIX_PBA_OFFSET	0xfffffff8 /* Offset into specified BAR */
+#define PCI_MSIX_FLAGS_BIRMASK	PCI_MSIX_PBA_BIR /* deprecated */
+#define PCI_CAP_MSIX_SIZEOF	12	/* size of MSIX registers */
+
+/* MSI-X Table entry format */
+#define PCI_MSIX_ENTRY_SIZE		16
+#define  PCI_MSIX_ENTRY_LOWER_ADDR	0
+#define  PCI_MSIX_ENTRY_UPPER_ADDR	4
+#define  PCI_MSIX_ENTRY_DATA		8
+#define  PCI_MSIX_ENTRY_VECTOR_CTRL	12
+#define   PCI_MSIX_ENTRY_CTRL_MASKBIT	1
+
+/* CompactPCI Hotswap Register */
+
+#define PCI_CHSWP_CSR		2	/* Control and Status Register */
+#define  PCI_CHSWP_DHA		0x01	/* Device Hiding Arm */
+#define  PCI_CHSWP_EIM		0x02	/* ENUM# Signal Mask */
+#define  PCI_CHSWP_PIE		0x04	/* Pending Insert or Extract */
+#define  PCI_CHSWP_LOO		0x08	/* LED On / Off */
+#define  PCI_CHSWP_PI		0x30	/* Programming Interface */
+#define  PCI_CHSWP_EXT		0x40	/* ENUM# status - extraction */
+#define  PCI_CHSWP_INS		0x80	/* ENUM# status - insertion */
+
+/* PCI Advanced Feature registers */
+
+#define PCI_AF_LENGTH		2
+#define PCI_AF_CAP		3
+#define  PCI_AF_CAP_TP		0x01
+#define  PCI_AF_CAP_FLR		0x02
+#define PCI_AF_CTRL		4
+#define  PCI_AF_CTRL_FLR	0x01
+#define PCI_AF_STATUS		5
+#define  PCI_AF_STATUS_TP	0x01
+#define PCI_CAP_AF_SIZEOF	6	/* size of AF registers */
+
+/* PCI Enhanced Allocation registers */
+
+#define PCI_EA_NUM_ENT		2	/* Number of Capability Entries */
+#define  PCI_EA_NUM_ENT_MASK	0x3f	/* Num Entries Mask */
+#define PCI_EA_FIRST_ENT	4	/* First EA Entry in List */
+#define PCI_EA_FIRST_ENT_BRIDGE	8	/* First EA Entry for Bridges */
+#define  PCI_EA_ES		0x00000007 /* Entry Size */
+#define  PCI_EA_BEI		0x000000f0 /* BAR Equivalent Indicator */
+/* 0-5 map to BARs 0-5 respectively */
+#define   PCI_EA_BEI_BAR0		0
+#define   PCI_EA_BEI_BAR5		5
+#define   PCI_EA_BEI_BRIDGE		6	/* Resource behind bridge */
+#define   PCI_EA_BEI_ENI		7	/* Equivalent Not Indicated */
+#define   PCI_EA_BEI_ROM		8	/* Expansion ROM */
+/* 9-14 map to VF BARs 0-5 respectively */
+#define   PCI_EA_BEI_VF_BAR0		9
+#define   PCI_EA_BEI_VF_BAR5		14
+#define   PCI_EA_BEI_RESERVED		15	/* Reserved - Treat like ENI */
+#define  PCI_EA_PP		0x0000ff00	/* Primary Properties */
+#define  PCI_EA_SP		0x00ff0000	/* Secondary Properties */
+#define   PCI_EA_P_MEM			0x00	/* Non-Prefetch Memory */
+#define   PCI_EA_P_MEM_PREFETCH		0x01	/* Prefetchable Memory */
+#define   PCI_EA_P_IO			0x02	/* I/O Space */
+#define   PCI_EA_P_VF_MEM_PREFETCH	0x03	/* VF Prefetchable Memory */
+#define   PCI_EA_P_VF_MEM		0x04	/* VF Non-Prefetch Memory */
+#define   PCI_EA_P_BRIDGE_MEM		0x05	/* Bridge Non-Prefetch Memory */
+#define   PCI_EA_P_BRIDGE_MEM_PREFETCH	0x06	/* Bridge Prefetchable Memory */
+#define   PCI_EA_P_BRIDGE_IO		0x07	/* Bridge I/O Space */
+/* 0x08-0xfc reserved */
+#define   PCI_EA_P_MEM_RESERVED		0xfd	/* Reserved Memory */
+#define   PCI_EA_P_IO_RESERVED		0xfe	/* Reserved I/O Space */
+#define   PCI_EA_P_UNAVAILABLE		0xff	/* Entry Unavailable */
+#define  PCI_EA_WRITABLE	0x40000000	/* Writable: 1 = RW, 0 = HwInit */
+#define  PCI_EA_ENABLE		0x80000000	/* Enable for this entry */
+#define PCI_EA_BASE		4		/* Base Address Offset */
+#define PCI_EA_MAX_OFFSET	8		/* MaxOffset (resource length) */
+/* bit 0 is reserved */
+#define  PCI_EA_IS_64		0x00000002	/* 64-bit field flag */
+#define  PCI_EA_FIELD_MASK	0xfffffffc	/* For Base & Max Offset */
+
+/* PCI-X registers (Type 0 (non-bridge) devices) */
+
+#define PCI_X_CMD		2	/* Modes & Features */
+#define  PCI_X_CMD_DPERR_E	0x0001	/* Data Parity Error Recovery Enable */
+#define  PCI_X_CMD_ERO		0x0002	/* Enable Relaxed Ordering */
+#define  PCI_X_CMD_READ_512	0x0000	/* 512 byte maximum read byte count */
+#define  PCI_X_CMD_READ_1K	0x0004	/* 1Kbyte maximum read byte count */
+#define  PCI_X_CMD_READ_2K	0x0008	/* 2Kbyte maximum read byte count */
+#define  PCI_X_CMD_READ_4K	0x000c	/* 4Kbyte maximum read byte count */
+#define  PCI_X_CMD_MAX_READ	0x000c	/* Max Memory Read Byte Count */
+				/* Max # of outstanding split transactions */
+#define  PCI_X_CMD_SPLIT_1	0x0000	/* Max 1 */
+#define  PCI_X_CMD_SPLIT_2	0x0010	/* Max 2 */
+#define  PCI_X_CMD_SPLIT_3	0x0020	/* Max 3 */
+#define  PCI_X_CMD_SPLIT_4	0x0030	/* Max 4 */
+#define  PCI_X_CMD_SPLIT_8	0x0040	/* Max 8 */
+#define  PCI_X_CMD_SPLIT_12	0x0050	/* Max 12 */
+#define  PCI_X_CMD_SPLIT_16	0x0060	/* Max 16 */
+#define  PCI_X_CMD_SPLIT_32	0x0070	/* Max 32 */
+#define  PCI_X_CMD_MAX_SPLIT	0x0070	/* Max Outstanding Split Transactions */
+#define  PCI_X_CMD_VERSION(x)	(((x) >> 12) & 3) /* Version */
+#define PCI_X_STATUS		4	/* PCI-X capabilities */
+#define  PCI_X_STATUS_DEVFN	0x000000ff	/* A copy of devfn */
+#define  PCI_X_STATUS_BUS	0x0000ff00	/* A copy of bus nr */
+#define  PCI_X_STATUS_64BIT	0x00010000	/* 64-bit device */
+#define  PCI_X_STATUS_133MHZ	0x00020000	/* 133 MHz capable */
+#define  PCI_X_STATUS_SPL_DISC	0x00040000	/* Split Completion Discarded */
+#define  PCI_X_STATUS_UNX_SPL	0x00080000	/* Unexpected Split Completion */
+#define  PCI_X_STATUS_COMPLEX	0x00100000	/* Device Complexity */
+#define  PCI_X_STATUS_MAX_READ	0x00600000	/* Designed Max Memory Read Count */
+#define  PCI_X_STATUS_MAX_SPLIT	0x03800000	/* Designed Max Outstanding Split Transactions */
+#define  PCI_X_STATUS_MAX_CUM	0x1c000000	/* Designed Max Cumulative Read Size */
+#define  PCI_X_STATUS_SPL_ERR	0x20000000	/* Rcvd Split Completion Error Msg */
+#define  PCI_X_STATUS_266MHZ	0x40000000	/* 266 MHz capable */
+#define  PCI_X_STATUS_533MHZ	0x80000000	/* 533 MHz capable */
+#define PCI_X_ECC_CSR		8	/* ECC control and status */
+#define PCI_CAP_PCIX_SIZEOF_V0	8	/* size of registers for Version 0 */
+#define PCI_CAP_PCIX_SIZEOF_V1	24	/* size for Version 1 */
+#define PCI_CAP_PCIX_SIZEOF_V2	PCI_CAP_PCIX_SIZEOF_V1	/* Same for v2 */
+
+/* PCI-X registers (Type 1 (bridge) devices) */
+
+#define PCI_X_BRIDGE_SSTATUS	2	/* Secondary Status */
+#define  PCI_X_SSTATUS_64BIT	0x0001	/* Secondary AD interface is 64 bits */
+#define  PCI_X_SSTATUS_133MHZ	0x0002	/* 133 MHz capable */
+#define  PCI_X_SSTATUS_FREQ	0x03c0	/* Secondary Bus Mode and Frequency */
+#define  PCI_X_SSTATUS_VERS	0x3000	/* PCI-X Capability Version */
+#define  PCI_X_SSTATUS_V1	0x1000	/* Mode 2, not Mode 1 */
+#define  PCI_X_SSTATUS_V2	0x2000	/* Mode 1 or Modes 1 and 2 */
+#define  PCI_X_SSTATUS_266MHZ	0x4000	/* 266 MHz capable */
+#define  PCI_X_SSTATUS_533MHZ	0x8000	/* 533 MHz capable */
+#define PCI_X_BRIDGE_STATUS	4	/* Bridge Status */
+
+/* PCI Bridge Subsystem ID registers */
+
+#define PCI_SSVID_VENDOR_ID     4	/* PCI Bridge subsystem vendor ID */
+#define PCI_SSVID_DEVICE_ID     6	/* PCI Bridge subsystem device ID */
+
+/* PCI Express capability registers */
+
+#define PCI_EXP_FLAGS		2	/* Capabilities register */
+#define PCI_EXP_FLAGS_VERS	0x000f	/* Capability version */
+#define PCI_EXP_FLAGS_TYPE	0x00f0	/* Device/Port type */
+#define  PCI_EXP_TYPE_ENDPOINT	0x0	/* Express Endpoint */
+#define  PCI_EXP_TYPE_LEG_END	0x1	/* Legacy Endpoint */
+#define  PCI_EXP_TYPE_ROOT_PORT 0x4	/* Root Port */
+#define  PCI_EXP_TYPE_UPSTREAM	0x5	/* Upstream Port */
+#define  PCI_EXP_TYPE_DOWNSTREAM 0x6	/* Downstream Port */
+#define  PCI_EXP_TYPE_PCI_BRIDGE 0x7	/* PCIe to PCI/PCI-X Bridge */
+#define  PCI_EXP_TYPE_PCIE_BRIDGE 0x8	/* PCI/PCI-X to PCIe Bridge */
+#define  PCI_EXP_TYPE_RC_END	0x9	/* Root Complex Integrated Endpoint */
+#define  PCI_EXP_TYPE_RC_EC	0xa	/* Root Complex Event Collector */
+#define PCI_EXP_FLAGS_SLOT	0x0100	/* Slot implemented */
+#define PCI_EXP_FLAGS_IRQ	0x3e00	/* Interrupt message number */
+#define PCI_EXP_DEVCAP		4	/* Device capabilities */
+#define  PCI_EXP_DEVCAP_PAYLOAD	0x00000007 /* Max_Payload_Size */
+#define  PCI_EXP_DEVCAP_PHANTOM	0x00000018 /* Phantom functions */
+#define  PCI_EXP_DEVCAP_EXT_TAG	0x00000020 /* Extended tags */
+#define  PCI_EXP_DEVCAP_L0S	0x000001c0 /* L0s Acceptable Latency */
+#define  PCI_EXP_DEVCAP_L1	0x00000e00 /* L1 Acceptable Latency */
+#define  PCI_EXP_DEVCAP_ATN_BUT	0x00001000 /* Attention Button Present */
+#define  PCI_EXP_DEVCAP_ATN_IND	0x00002000 /* Attention Indicator Present */
+#define  PCI_EXP_DEVCAP_PWR_IND	0x00004000 /* Power Indicator Present */
+#define  PCI_EXP_DEVCAP_RBER	0x00008000 /* Role-Based Error Reporting */
+#define  PCI_EXP_DEVCAP_PWR_VAL	0x03fc0000 /* Slot Power Limit Value */
+#define  PCI_EXP_DEVCAP_PWR_SCL	0x0c000000 /* Slot Power Limit Scale */
+#define  PCI_EXP_DEVCAP_FLR     0x10000000 /* Function Level Reset */
+#define PCI_EXP_DEVCTL		8	/* Device Control */
+#define  PCI_EXP_DEVCTL_CERE	0x0001	/* Correctable Error Reporting En. */
+#define  PCI_EXP_DEVCTL_NFERE	0x0002	/* Non-Fatal Error Reporting Enable */
+#define  PCI_EXP_DEVCTL_FERE	0x0004	/* Fatal Error Reporting Enable */
+#define  PCI_EXP_DEVCTL_URRE	0x0008	/* Unsupported Request Reporting En. */
+#define  PCI_EXP_DEVCTL_RELAX_EN 0x0010 /* Enable relaxed ordering */
+#define  PCI_EXP_DEVCTL_PAYLOAD	0x00e0	/* Max_Payload_Size */
+#define  PCI_EXP_DEVCTL_EXT_TAG	0x0100	/* Extended Tag Field Enable */
+#define  PCI_EXP_DEVCTL_PHANTOM	0x0200	/* Phantom Functions Enable */
+#define  PCI_EXP_DEVCTL_AUX_PME	0x0400	/* Auxiliary Power PM Enable */
+#define  PCI_EXP_DEVCTL_NOSNOOP_EN 0x0800  /* Enable No Snoop */
+#define  PCI_EXP_DEVCTL_READRQ	0x7000	/* Max_Read_Request_Size */
+#define  PCI_EXP_DEVCTL_READRQ_128B  0x0000 /* 128 Bytes */
+#define  PCI_EXP_DEVCTL_READRQ_256B  0x1000 /* 256 Bytes */
+#define  PCI_EXP_DEVCTL_READRQ_512B  0x2000 /* 512 Bytes */
+#define  PCI_EXP_DEVCTL_READRQ_1024B 0x3000 /* 1024 Bytes */
+#define  PCI_EXP_DEVCTL_BCR_FLR 0x8000  /* Bridge Configuration Retry / FLR */
+#define PCI_EXP_DEVSTA		10	/* Device Status */
+#define  PCI_EXP_DEVSTA_CED	0x0001	/* Correctable Error Detected */
+#define  PCI_EXP_DEVSTA_NFED	0x0002	/* Non-Fatal Error Detected */
+#define  PCI_EXP_DEVSTA_FED	0x0004	/* Fatal Error Detected */
+#define  PCI_EXP_DEVSTA_URD	0x0008	/* Unsupported Request Detected */
+#define  PCI_EXP_DEVSTA_AUXPD	0x0010	/* AUX Power Detected */
+#define  PCI_EXP_DEVSTA_TRPND	0x0020	/* Transactions Pending */
+#define PCI_EXP_LNKCAP		12	/* Link Capabilities */
+#define  PCI_EXP_LNKCAP_SLS	0x0000000f /* Supported Link Speeds */
+#define  PCI_EXP_LNKCAP_SLS_2_5GB 0x00000001 /* LNKCAP2 SLS Vector bit 0 */
+#define  PCI_EXP_LNKCAP_SLS_5_0GB 0x00000002 /* LNKCAP2 SLS Vector bit 1 */
+#define  PCI_EXP_LNKCAP_MLW	0x000003f0 /* Maximum Link Width */
+#define  PCI_EXP_LNKCAP_ASPMS	0x00000c00 /* ASPM Support */
+#define  PCI_EXP_LNKCAP_L0SEL	0x00007000 /* L0s Exit Latency */
+#define  PCI_EXP_LNKCAP_L1EL	0x00038000 /* L1 Exit Latency */
+#define  PCI_EXP_LNKCAP_CLKPM	0x00040000 /* Clock Power Management */
+#define  PCI_EXP_LNKCAP_SDERC	0x00080000 /* Surprise Down Error Reporting Capable */
+#define  PCI_EXP_LNKCAP_DLLLARC	0x00100000 /* Data Link Layer Link Active Reporting Capable */
+#define  PCI_EXP_LNKCAP_LBNC	0x00200000 /* Link Bandwidth Notification Capability */
+#define  PCI_EXP_LNKCAP_PN	0xff000000 /* Port Number */
+#define PCI_EXP_LNKCTL		16	/* Link Control */
+#define  PCI_EXP_LNKCTL_ASPMC	0x0003	/* ASPM Control */
+#define  PCI_EXP_LNKCTL_ASPM_L0S 0x0001	/* L0s Enable */
+#define  PCI_EXP_LNKCTL_ASPM_L1  0x0002	/* L1 Enable */
+#define  PCI_EXP_LNKCTL_RCB	0x0008	/* Read Completion Boundary */
+#define  PCI_EXP_LNKCTL_LD	0x0010	/* Link Disable */
+#define  PCI_EXP_LNKCTL_RL	0x0020	/* Retrain Link */
+#define  PCI_EXP_LNKCTL_CCC	0x0040	/* Common Clock Configuration */
+#define  PCI_EXP_LNKCTL_ES	0x0080	/* Extended Synch */
+#define  PCI_EXP_LNKCTL_CLKREQ_EN 0x0100 /* Enable clkreq */
+#define  PCI_EXP_LNKCTL_HAWD	0x0200	/* Hardware Autonomous Width Disable */
+#define  PCI_EXP_LNKCTL_LBMIE	0x0400	/* Link Bandwidth Management Interrupt Enable */
+#define  PCI_EXP_LNKCTL_LABIE	0x0800	/* Link Autonomous Bandwidth Interrupt Enable */
+#define PCI_EXP_LNKSTA		18	/* Link Status */
+#define  PCI_EXP_LNKSTA_CLS	0x000f	/* Current Link Speed */
+#define  PCI_EXP_LNKSTA_CLS_2_5GB 0x0001 /* Current Link Speed 2.5GT/s */
+#define  PCI_EXP_LNKSTA_CLS_5_0GB 0x0002 /* Current Link Speed 5.0GT/s */
+#define  PCI_EXP_LNKSTA_CLS_8_0GB 0x0003 /* Current Link Speed 8.0GT/s */
+#define  PCI_EXP_LNKSTA_NLW	0x03f0	/* Negotiated Link Width */
+#define  PCI_EXP_LNKSTA_NLW_X1	0x0010	/* Current Link Width x1 */
+#define  PCI_EXP_LNKSTA_NLW_X2	0x0020	/* Current Link Width x2 */
+#define  PCI_EXP_LNKSTA_NLW_X4	0x0040	/* Current Link Width x4 */
+#define  PCI_EXP_LNKSTA_NLW_X8	0x0080	/* Current Link Width x8 */
+#define  PCI_EXP_LNKSTA_NLW_SHIFT 4	/* start of NLW mask in link status */
+#define  PCI_EXP_LNKSTA_LT	0x0800	/* Link Training */
+#define  PCI_EXP_LNKSTA_SLC	0x1000	/* Slot Clock Configuration */
+#define  PCI_EXP_LNKSTA_DLLLA	0x2000	/* Data Link Layer Link Active */
+#define  PCI_EXP_LNKSTA_LBMS	0x4000	/* Link Bandwidth Management Status */
+#define  PCI_EXP_LNKSTA_LABS	0x8000	/* Link Autonomous Bandwidth Status */
+#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V1	20	/* v1 endpoints end here */
+#define PCI_EXP_SLTCAP		20	/* Slot Capabilities */
+#define  PCI_EXP_SLTCAP_ABP	0x00000001 /* Attention Button Present */
+#define  PCI_EXP_SLTCAP_PCP	0x00000002 /* Power Controller Present */
+#define  PCI_EXP_SLTCAP_MRLSP	0x00000004 /* MRL Sensor Present */
+#define  PCI_EXP_SLTCAP_AIP	0x00000008 /* Attention Indicator Present */
+#define  PCI_EXP_SLTCAP_PIP	0x00000010 /* Power Indicator Present */
+#define  PCI_EXP_SLTCAP_HPS	0x00000020 /* Hot-Plug Surprise */
+#define  PCI_EXP_SLTCAP_HPC	0x00000040 /* Hot-Plug Capable */
+#define  PCI_EXP_SLTCAP_SPLV	0x00007f80 /* Slot Power Limit Value */
+#define  PCI_EXP_SLTCAP_SPLS	0x00018000 /* Slot Power Limit Scale */
+#define  PCI_EXP_SLTCAP_EIP	0x00020000 /* Electromechanical Interlock Present */
+#define  PCI_EXP_SLTCAP_NCCS	0x00040000 /* No Command Completed Support */
+#define  PCI_EXP_SLTCAP_PSN	0xfff80000 /* Physical Slot Number */
+#define PCI_EXP_SLTCTL		24	/* Slot Control */
+#define  PCI_EXP_SLTCTL_ABPE	0x0001	/* Attention Button Pressed Enable */
+#define  PCI_EXP_SLTCTL_PFDE	0x0002	/* Power Fault Detected Enable */
+#define  PCI_EXP_SLTCTL_MRLSCE	0x0004	/* MRL Sensor Changed Enable */
+#define  PCI_EXP_SLTCTL_PDCE	0x0008	/* Presence Detect Changed Enable */
+#define  PCI_EXP_SLTCTL_CCIE	0x0010	/* Command Completed Interrupt Enable */
+#define  PCI_EXP_SLTCTL_HPIE	0x0020	/* Hot-Plug Interrupt Enable */
+#define  PCI_EXP_SLTCTL_AIC	0x00c0	/* Attention Indicator Control */
+#define  PCI_EXP_SLTCTL_ATTN_IND_ON    0x0040 /* Attention Indicator on */
+#define  PCI_EXP_SLTCTL_ATTN_IND_BLINK 0x0080 /* Attention Indicator blinking */
+#define  PCI_EXP_SLTCTL_ATTN_IND_OFF   0x00c0 /* Attention Indicator off */
+#define  PCI_EXP_SLTCTL_PIC	0x0300	/* Power Indicator Control */
+#define  PCI_EXP_SLTCTL_PWR_IND_ON     0x0100 /* Power Indicator on */
+#define  PCI_EXP_SLTCTL_PWR_IND_BLINK  0x0200 /* Power Indicator blinking */
+#define  PCI_EXP_SLTCTL_PWR_IND_OFF    0x0300 /* Power Indicator off */
+#define  PCI_EXP_SLTCTL_PCC	0x0400	/* Power Controller Control */
+#define  PCI_EXP_SLTCTL_PWR_ON         0x0000 /* Power On */
+#define  PCI_EXP_SLTCTL_PWR_OFF        0x0400 /* Power Off */
+#define  PCI_EXP_SLTCTL_EIC	0x0800	/* Electromechanical Interlock Control */
+#define  PCI_EXP_SLTCTL_DLLSCE	0x1000	/* Data Link Layer State Changed Enable */
+#define PCI_EXP_SLTSTA		26	/* Slot Status */
+#define  PCI_EXP_SLTSTA_ABP	0x0001	/* Attention Button Pressed */
+#define  PCI_EXP_SLTSTA_PFD	0x0002	/* Power Fault Detected */
+#define  PCI_EXP_SLTSTA_MRLSC	0x0004	/* MRL Sensor Changed */
+#define  PCI_EXP_SLTSTA_PDC	0x0008	/* Presence Detect Changed */
+#define  PCI_EXP_SLTSTA_CC	0x0010	/* Command Completed */
+#define  PCI_EXP_SLTSTA_MRLSS	0x0020	/* MRL Sensor State */
+#define  PCI_EXP_SLTSTA_PDS	0x0040	/* Presence Detect State */
+#define  PCI_EXP_SLTSTA_EIS	0x0080	/* Electromechanical Interlock Status */
+#define  PCI_EXP_SLTSTA_DLLSC	0x0100	/* Data Link Layer State Changed */
+#define PCI_EXP_RTCTL		28	/* Root Control */
+#define  PCI_EXP_RTCTL_SECEE	0x0001	/* System Error on Correctable Error */
+#define  PCI_EXP_RTCTL_SENFEE	0x0002	/* System Error on Non-Fatal Error */
+#define  PCI_EXP_RTCTL_SEFEE	0x0004	/* System Error on Fatal Error */
+#define  PCI_EXP_RTCTL_PMEIE	0x0008	/* PME Interrupt Enable */
+#define  PCI_EXP_RTCTL_CRSSVE	0x0010	/* CRS Software Visibility Enable */
+#define PCI_EXP_RTCAP		30	/* Root Capabilities */
+#define  PCI_EXP_RTCAP_CRSVIS	0x0001	/* CRS Software Visibility capability */
+#define PCI_EXP_RTSTA		32	/* Root Status */
+#define PCI_EXP_RTSTA_PME	0x00010000 /* PME status */
+#define PCI_EXP_RTSTA_PENDING	0x00020000 /* PME pending */
+/*
+ * The Device Capabilities 2, Device Status 2, Device Control 2,
+ * Link Capabilities 2, Link Status 2, Link Control 2,
+ * Slot Capabilities 2, Slot Status 2, and Slot Control 2 registers
+ * are only present on devices with PCIe Capability version 2.
+ * Use pcie_capability_read_word() and similar interfaces to use them
+ * safely.
+ */
+#define PCI_EXP_DEVCAP2		36	/* Device Capabilities 2 */
+#define  PCI_EXP_DEVCAP2_ARI		0x00000020 /* Alternative Routing-ID */
+#define  PCI_EXP_DEVCAP2_LTR		0x00000800 /* Latency tolerance reporting */
+#define  PCI_EXP_DEVCAP2_OBFF_MASK	0x000c0000 /* OBFF support mechanism */
+#define  PCI_EXP_DEVCAP2_OBFF_MSG	0x00040000 /* New message signaling */
+#define  PCI_EXP_DEVCAP2_OBFF_WAKE	0x00080000 /* Re-use WAKE# for OBFF */
+#define PCI_EXP_DEVCTL2		40	/* Device Control 2 */
+#define  PCI_EXP_DEVCTL2_COMP_TIMEOUT	0x000f	/* Completion Timeout Value */
+#define  PCI_EXP_DEVCTL2_ARI		0x0020	/* Alternative Routing-ID */
+#define  PCI_EXP_DEVCTL2_IDO_REQ_EN	0x0100	/* Allow IDO for requests */
+#define  PCI_EXP_DEVCTL2_IDO_CMP_EN	0x0200	/* Allow IDO for completions */
+#define  PCI_EXP_DEVCTL2_LTR_EN		0x0400	/* Enable LTR mechanism */
+#define  PCI_EXP_DEVCTL2_OBFF_MSGA_EN	0x2000	/* Enable OBFF Message type A */
+#define  PCI_EXP_DEVCTL2_OBFF_MSGB_EN	0x4000	/* Enable OBFF Message type B */
+#define  PCI_EXP_DEVCTL2_OBFF_WAKE_EN	0x6000	/* OBFF using WAKE# signaling */
+#define PCI_EXP_DEVSTA2		42	/* Device Status 2 */
+#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2	44	/* v2 endpoints end here */
+#define PCI_EXP_LNKCAP2		44	/* Link Capabilities 2 */
+#define  PCI_EXP_LNKCAP2_SLS_2_5GB	0x00000002 /* Supported Speed 2.5GT/s */
+#define  PCI_EXP_LNKCAP2_SLS_5_0GB	0x00000004 /* Supported Speed 5.0GT/s */
+#define  PCI_EXP_LNKCAP2_SLS_8_0GB	0x00000008 /* Supported Speed 8.0GT/s */
+#define  PCI_EXP_LNKCAP2_CROSSLINK	0x00000100 /* Crosslink supported */
+#define PCI_EXP_LNKCTL2		48	/* Link Control 2 */
+#define PCI_EXP_LNKSTA2		50	/* Link Status 2 */
+#define PCI_EXP_SLTCAP2		52	/* Slot Capabilities 2 */
+#define PCI_EXP_SLTCTL2		56	/* Slot Control 2 */
+#define PCI_EXP_SLTSTA2		58	/* Slot Status 2 */
+
+/* Extended Capabilities (PCI-X 2.0 and Express) */
+#define PCI_EXT_CAP_ID(header)		(header & 0x0000ffff)
+#define PCI_EXT_CAP_VER(header)		((header >> 16) & 0xf)
+#define PCI_EXT_CAP_NEXT(header)	((header >> 20) & 0xffc)
+
+#define PCI_EXT_CAP_ID_ERR	0x01	/* Advanced Error Reporting */
+#define PCI_EXT_CAP_ID_VC	0x02	/* Virtual Channel Capability */
+#define PCI_EXT_CAP_ID_DSN	0x03	/* Device Serial Number */
+#define PCI_EXT_CAP_ID_PWR	0x04	/* Power Budgeting */
+#define PCI_EXT_CAP_ID_RCLD	0x05	/* Root Complex Link Declaration */
+#define PCI_EXT_CAP_ID_RCILC	0x06	/* Root Complex Internal Link Control */
+#define PCI_EXT_CAP_ID_RCEC	0x07	/* Root Complex Event Collector */
+#define PCI_EXT_CAP_ID_MFVC	0x08	/* Multi-Function VC Capability */
+#define PCI_EXT_CAP_ID_VC9	0x09	/* same as _VC */
+#define PCI_EXT_CAP_ID_RCRB	0x0A	/* Root Complex RB? */
+#define PCI_EXT_CAP_ID_VNDR	0x0B	/* Vendor-Specific */
+#define PCI_EXT_CAP_ID_CAC	0x0C	/* Config Access - obsolete */
+#define PCI_EXT_CAP_ID_ACS	0x0D	/* Access Control Services */
+#define PCI_EXT_CAP_ID_ARI	0x0E	/* Alternate Routing ID */
+#define PCI_EXT_CAP_ID_ATS	0x0F	/* Address Translation Services */
+#define PCI_EXT_CAP_ID_SRIOV	0x10	/* Single Root I/O Virtualization */
+#define PCI_EXT_CAP_ID_MRIOV	0x11	/* Multi Root I/O Virtualization */
+#define PCI_EXT_CAP_ID_MCAST	0x12	/* Multicast */
+#define PCI_EXT_CAP_ID_PRI	0x13	/* Page Request Interface */
+#define PCI_EXT_CAP_ID_AMD_XXX	0x14	/* Reserved for AMD */
+#define PCI_EXT_CAP_ID_REBAR	0x15	/* Resizable BAR */
+#define PCI_EXT_CAP_ID_DPA	0x16	/* Dynamic Power Allocation */
+#define PCI_EXT_CAP_ID_TPH	0x17	/* TPH Requester */
+#define PCI_EXT_CAP_ID_LTR	0x18	/* Latency Tolerance Reporting */
+#define PCI_EXT_CAP_ID_SECPCI	0x19	/* Secondary PCIe Capability */
+#define PCI_EXT_CAP_ID_PMUX	0x1A	/* Protocol Multiplexing */
+#define PCI_EXT_CAP_ID_PASID	0x1B	/* Process Address Space ID */
+#define PCI_EXT_CAP_ID_MAX	PCI_EXT_CAP_ID_PASID
+
+#define PCI_EXT_CAP_DSN_SIZEOF	12
+#define PCI_EXT_CAP_MCAST_ENDPOINT_SIZEOF 40
+
+/* Advanced Error Reporting */
+#define PCI_ERR_UNCOR_STATUS	4	/* Uncorrectable Error Status */
+#define  PCI_ERR_UNC_UND	0x00000001	/* Undefined */
+#define  PCI_ERR_UNC_DLP	0x00000010	/* Data Link Protocol */
+#define  PCI_ERR_UNC_SURPDN	0x00000020	/* Surprise Down */
+#define  PCI_ERR_UNC_POISON_TLP	0x00001000	/* Poisoned TLP */
+#define  PCI_ERR_UNC_FCP	0x00002000	/* Flow Control Protocol */
+#define  PCI_ERR_UNC_COMP_TIME	0x00004000	/* Completion Timeout */
+#define  PCI_ERR_UNC_COMP_ABORT	0x00008000	/* Completer Abort */
+#define  PCI_ERR_UNC_UNX_COMP	0x00010000	/* Unexpected Completion */
+#define  PCI_ERR_UNC_RX_OVER	0x00020000	/* Receiver Overflow */
+#define  PCI_ERR_UNC_MALF_TLP	0x00040000	/* Malformed TLP */
+#define  PCI_ERR_UNC_ECRC	0x00080000	/* ECRC Error Status */
+#define  PCI_ERR_UNC_UNSUP	0x00100000	/* Unsupported Request */
+#define  PCI_ERR_UNC_ACSV	0x00200000	/* ACS Violation */
+#define  PCI_ERR_UNC_INTN	0x00400000	/* internal error */
+#define  PCI_ERR_UNC_MCBTLP	0x00800000	/* MC blocked TLP */
+#define  PCI_ERR_UNC_ATOMEG	0x01000000	/* Atomic egress blocked */
+#define  PCI_ERR_UNC_TLPPRE	0x02000000	/* TLP prefix blocked */
+#define PCI_ERR_UNCOR_MASK	8	/* Uncorrectable Error Mask */
+	/* Same bits as above */
+#define PCI_ERR_UNCOR_SEVER	12	/* Uncorrectable Error Severity */
+	/* Same bits as above */
+#define PCI_ERR_COR_STATUS	16	/* Correctable Error Status */
+#define  PCI_ERR_COR_RCVR	0x00000001	/* Receiver Error Status */
+#define  PCI_ERR_COR_BAD_TLP	0x00000040	/* Bad TLP Status */
+#define  PCI_ERR_COR_BAD_DLLP	0x00000080	/* Bad DLLP Status */
+#define  PCI_ERR_COR_REP_ROLL	0x00000100	/* REPLAY_NUM Rollover */
+#define  PCI_ERR_COR_REP_TIMER	0x00001000	/* Replay Timer Timeout */
+#define  PCI_ERR_COR_ADV_NFAT	0x00002000	/* Advisory Non-Fatal */
+#define  PCI_ERR_COR_INTERNAL	0x00004000	/* Corrected Internal */
+#define  PCI_ERR_COR_LOG_OVER	0x00008000	/* Header Log Overflow */
+#define PCI_ERR_COR_MASK	20	/* Correctable Error Mask */
+	/* Same bits as above */
+#define PCI_ERR_CAP		24	/* Advanced Error Capabilities */
+#define  PCI_ERR_CAP_FEP(x)	((x) & 31)	/* First Error Pointer */
+#define  PCI_ERR_CAP_ECRC_GENC	0x00000020	/* ECRC Generation Capable */
+#define  PCI_ERR_CAP_ECRC_GENE	0x00000040	/* ECRC Generation Enable */
+#define  PCI_ERR_CAP_ECRC_CHKC	0x00000080	/* ECRC Check Capable */
+#define  PCI_ERR_CAP_ECRC_CHKE	0x00000100	/* ECRC Check Enable */
+#define PCI_ERR_HEADER_LOG	28	/* Header Log Register (16 bytes) */
+#define PCI_ERR_ROOT_COMMAND	44	/* Root Error Command */
+/* Correctable Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_COR_EN		0x00000001
+/* Non-fatal Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_NONFATAL_EN	0x00000002
+/* Fatal Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_FATAL_EN	0x00000004
+#define PCI_ERR_ROOT_STATUS	48
+#define PCI_ERR_ROOT_COR_RCV		0x00000001	/* ERR_COR Received */
+/* Multi ERR_COR Received */
+#define PCI_ERR_ROOT_MULTI_COR_RCV	0x00000002
+/* ERR_FATAL/NONFATAL Received */
+#define PCI_ERR_ROOT_UNCOR_RCV		0x00000004
+/* Multi ERR_FATAL/NONFATAL Received */
+#define PCI_ERR_ROOT_MULTI_UNCOR_RCV	0x00000008
+#define PCI_ERR_ROOT_FIRST_FATAL	0x00000010	/* First Fatal */
+#define PCI_ERR_ROOT_NONFATAL_RCV	0x00000020	/* Non-Fatal Received */
+#define PCI_ERR_ROOT_FATAL_RCV		0x00000040	/* Fatal Received */
+#define PCI_ERR_ROOT_ERR_SRC	52	/* Error Source Identification */
+
+/* Virtual Channel */
+#define PCI_VC_PORT_CAP1	4
+#define  PCI_VC_CAP1_EVCC	0x00000007	/* extended VC count */
+#define  PCI_VC_CAP1_LPEVCC	0x00000070	/* low prio extended VC count */
+#define  PCI_VC_CAP1_ARB_SIZE	0x00000c00
+#define PCI_VC_PORT_CAP2	8
+#define  PCI_VC_CAP2_32_PHASE		0x00000002
+#define  PCI_VC_CAP2_64_PHASE		0x00000004
+#define  PCI_VC_CAP2_128_PHASE		0x00000008
+#define  PCI_VC_CAP2_ARB_OFF		0xff000000
+#define PCI_VC_PORT_CTRL	12
+#define  PCI_VC_PORT_CTRL_LOAD_TABLE	0x00000001
+#define PCI_VC_PORT_STATUS	14
+#define  PCI_VC_PORT_STATUS_TABLE	0x00000001
+#define PCI_VC_RES_CAP		16
+#define  PCI_VC_RES_CAP_32_PHASE	0x00000002
+#define  PCI_VC_RES_CAP_64_PHASE	0x00000004
+#define  PCI_VC_RES_CAP_128_PHASE	0x00000008
+#define  PCI_VC_RES_CAP_128_PHASE_TB	0x00000010
+#define  PCI_VC_RES_CAP_256_PHASE	0x00000020
+#define  PCI_VC_RES_CAP_ARB_OFF		0xff000000
+#define PCI_VC_RES_CTRL		20
+#define  PCI_VC_RES_CTRL_LOAD_TABLE	0x00010000
+#define  PCI_VC_RES_CTRL_ARB_SELECT	0x000e0000
+#define  PCI_VC_RES_CTRL_ID		0x07000000
+#define  PCI_VC_RES_CTRL_ENABLE		0x80000000
+#define PCI_VC_RES_STATUS	26
+#define  PCI_VC_RES_STATUS_TABLE	0x00000001
+#define  PCI_VC_RES_STATUS_NEGO		0x00000002
+#define PCI_CAP_VC_BASE_SIZEOF		0x10
+#define PCI_CAP_VC_PER_VC_SIZEOF	0x0C
+
+/* Power Budgeting */
+#define PCI_PWR_DSR		4	/* Data Select Register */
+#define PCI_PWR_DATA		8	/* Data Register */
+#define  PCI_PWR_DATA_BASE(x)	((x) & 0xff)	    /* Base Power */
+#define  PCI_PWR_DATA_SCALE(x)	(((x) >> 8) & 3)    /* Data Scale */
+#define  PCI_PWR_DATA_PM_SUB(x)	(((x) >> 10) & 7)   /* PM Sub State */
+#define  PCI_PWR_DATA_PM_STATE(x) (((x) >> 13) & 3) /* PM State */
+#define  PCI_PWR_DATA_TYPE(x)	(((x) >> 15) & 7)   /* Type */
+#define  PCI_PWR_DATA_RAIL(x)	(((x) >> 18) & 7)   /* Power Rail */
+#define PCI_PWR_CAP		12	/* Capability */
+#define  PCI_PWR_CAP_BUDGET(x)	((x) & 1)	/* Included in system budget */
+#define PCI_EXT_CAP_PWR_SIZEOF	16
+
+/* Vendor-Specific (VSEC, PCI_EXT_CAP_ID_VNDR) */
+#define PCI_VNDR_HEADER		4	/* Vendor-Specific Header */
+#define  PCI_VNDR_HEADER_ID(x)	((x) & 0xffff)
+#define  PCI_VNDR_HEADER_REV(x)	(((x) >> 16) & 0xf)
+#define  PCI_VNDR_HEADER_LEN(x)	(((x) >> 20) & 0xfff)
+
+/*
+ * HyperTransport sub capability types
+ *
+ * Unfortunately there are both 3 bit and 5 bit capability types defined
+ * in the HT spec, catering for that is a little messy. You probably don't
+ * want to use these directly, just use pci_find_ht_capability() and it
+ * will do the right thing for you.
+ */
+#define HT_3BIT_CAP_MASK	0xE0
+#define HT_CAPTYPE_SLAVE	0x00	/* Slave/Primary link configuration */
+#define HT_CAPTYPE_HOST		0x20	/* Host/Secondary link configuration */
+
+#define HT_5BIT_CAP_MASK	0xF8
+#define HT_CAPTYPE_IRQ		0x80	/* IRQ Configuration */
+#define HT_CAPTYPE_REMAPPING_40	0xA0	/* 40 bit address remapping */
+#define HT_CAPTYPE_REMAPPING_64 0xA2	/* 64 bit address remapping */
+#define HT_CAPTYPE_UNITID_CLUMP	0x90	/* Unit ID clumping */
+#define HT_CAPTYPE_EXTCONF	0x98	/* Extended Configuration Space Access */
+#define HT_CAPTYPE_MSI_MAPPING	0xA8	/* MSI Mapping Capability */
+#define  HT_MSI_FLAGS		0x02		/* Offset to flags */
+#define  HT_MSI_FLAGS_ENABLE	0x1		/* Mapping enable */
+#define  HT_MSI_FLAGS_FIXED	0x2		/* Fixed mapping only */
+#define  HT_MSI_FIXED_ADDR	0x00000000FEE00000ULL	/* Fixed addr */
+#define  HT_MSI_ADDR_LO		0x04		/* Offset to low addr bits */
+#define  HT_MSI_ADDR_LO_MASK	0xFFF00000	/* Low address bit mask */
+#define  HT_MSI_ADDR_HI		0x08		/* Offset to high addr bits */
+#define HT_CAPTYPE_DIRECT_ROUTE	0xB0	/* Direct routing configuration */
+#define HT_CAPTYPE_VCSET	0xB8	/* Virtual Channel configuration */
+#define HT_CAPTYPE_ERROR_RETRY	0xC0	/* Retry on error configuration */
+#define HT_CAPTYPE_GEN3		0xD0	/* Generation 3 HyperTransport configuration */
+#define HT_CAPTYPE_PM		0xE0	/* HyperTransport power management configuration */
+#define HT_CAP_SIZEOF_LONG	28	/* slave & primary */
+#define HT_CAP_SIZEOF_SHORT	24	/* host & secondary */
+
+/* Alternative Routing-ID Interpretation */
+#define PCI_ARI_CAP		0x04	/* ARI Capability Register */
+#define  PCI_ARI_CAP_MFVC	0x0001	/* MFVC Function Groups Capability */
+#define  PCI_ARI_CAP_ACS	0x0002	/* ACS Function Groups Capability */
+#define  PCI_ARI_CAP_NFN(x)	(((x) >> 8) & 0xff) /* Next Function Number */
+#define PCI_ARI_CTRL		0x06	/* ARI Control Register */
+#define  PCI_ARI_CTRL_MFVC	0x0001	/* MFVC Function Groups Enable */
+#define  PCI_ARI_CTRL_ACS	0x0002	/* ACS Function Groups Enable */
+#define  PCI_ARI_CTRL_FG(x)	(((x) >> 4) & 7) /* Function Group */
+#define PCI_EXT_CAP_ARI_SIZEOF	8
+
+/* Address Translation Service */
+#define PCI_ATS_CAP		0x04	/* ATS Capability Register */
+#define  PCI_ATS_CAP_QDEP(x)	((x) & 0x1f)	/* Invalidate Queue Depth */
+#define  PCI_ATS_MAX_QDEP	32	/* Max Invalidate Queue Depth */
+#define PCI_ATS_CTRL		0x06	/* ATS Control Register */
+#define  PCI_ATS_CTRL_ENABLE	0x8000	/* ATS Enable */
+#define  PCI_ATS_CTRL_STU(x)	((x) & 0x1f)	/* Smallest Translation Unit */
+#define  PCI_ATS_MIN_STU	12	/* shift of minimum STU block */
+#define PCI_EXT_CAP_ATS_SIZEOF	8
+
+/* Page Request Interface */
+#define PCI_PRI_CTRL		0x04	/* PRI control register */
+#define  PCI_PRI_CTRL_ENABLE	0x01	/* Enable */
+#define  PCI_PRI_CTRL_RESET	0x02	/* Reset */
+#define PCI_PRI_STATUS		0x06	/* PRI status register */
+#define  PCI_PRI_STATUS_RF	0x001	/* Response Failure */
+#define  PCI_PRI_STATUS_UPRGI	0x002	/* Unexpected PRG index */
+#define  PCI_PRI_STATUS_STOPPED	0x100	/* PRI Stopped */
+#define PCI_PRI_MAX_REQ		0x08	/* PRI max reqs supported */
+#define PCI_PRI_ALLOC_REQ	0x0c	/* PRI max reqs allowed */
+#define PCI_EXT_CAP_PRI_SIZEOF	16
+
+/* Process Address Space ID */
+#define PCI_PASID_CAP		0x04    /* PASID feature register */
+#define  PCI_PASID_CAP_EXEC	0x02	/* Exec permissions Supported */
+#define  PCI_PASID_CAP_PRIV	0x04	/* Privilege Mode Supported */
+#define PCI_PASID_CTRL		0x06    /* PASID control register */
+#define  PCI_PASID_CTRL_ENABLE	0x01	/* Enable bit */
+#define  PCI_PASID_CTRL_EXEC	0x02	/* Exec permissions Enable */
+#define  PCI_PASID_CTRL_PRIV	0x04	/* Privilege Mode Enable */
+#define PCI_EXT_CAP_PASID_SIZEOF	8
+
+/* Single Root I/O Virtualization */
+#define PCI_SRIOV_CAP		0x04	/* SR-IOV Capabilities */
+#define  PCI_SRIOV_CAP_VFM	0x01	/* VF Migration Capable */
+#define  PCI_SRIOV_CAP_INTR(x)	((x) >> 21) /* Interrupt Message Number */
+#define PCI_SRIOV_CTRL		0x08	/* SR-IOV Control */
+#define  PCI_SRIOV_CTRL_VFE	0x01	/* VF Enable */
+#define  PCI_SRIOV_CTRL_VFM	0x02	/* VF Migration Enable */
+#define  PCI_SRIOV_CTRL_INTR	0x04	/* VF Migration Interrupt Enable */
+#define  PCI_SRIOV_CTRL_MSE	0x08	/* VF Memory Space Enable */
+#define  PCI_SRIOV_CTRL_ARI	0x10	/* ARI Capable Hierarchy */
+#define PCI_SRIOV_STATUS	0x0a	/* SR-IOV Status */
+#define  PCI_SRIOV_STATUS_VFM	0x01	/* VF Migration Status */
+#define PCI_SRIOV_INITIAL_VF	0x0c	/* Initial VFs */
+#define PCI_SRIOV_TOTAL_VF	0x0e	/* Total VFs */
+#define PCI_SRIOV_NUM_VF	0x10	/* Number of VFs */
+#define PCI_SRIOV_FUNC_LINK	0x12	/* Function Dependency Link */
+#define PCI_SRIOV_VF_OFFSET	0x14	/* First VF Offset */
+#define PCI_SRIOV_VF_STRIDE	0x16	/* Following VF Stride */
+#define PCI_SRIOV_VF_DID	0x1a	/* VF Device ID */
+#define PCI_SRIOV_SUP_PGSIZE	0x1c	/* Supported Page Sizes */
+#define PCI_SRIOV_SYS_PGSIZE	0x20	/* System Page Size */
+#define PCI_SRIOV_BAR		0x24	/* VF BAR0 */
+#define  PCI_SRIOV_NUM_BARS	6	/* Number of VF BARs */
+#define PCI_SRIOV_VFM		0x3c	/* VF Migration State Array Offset*/
+#define  PCI_SRIOV_VFM_BIR(x)	((x) & 7)	/* State BIR */
+#define  PCI_SRIOV_VFM_OFFSET(x) ((x) & ~7)	/* State Offset */
+#define  PCI_SRIOV_VFM_UA	0x0	/* Inactive.Unavailable */
+#define  PCI_SRIOV_VFM_MI	0x1	/* Dormant.MigrateIn */
+#define  PCI_SRIOV_VFM_MO	0x2	/* Active.MigrateOut */
+#define  PCI_SRIOV_VFM_AV	0x3	/* Active.Available */
+#define PCI_EXT_CAP_SRIOV_SIZEOF 64
+
+#define PCI_LTR_MAX_SNOOP_LAT	0x4
+#define PCI_LTR_MAX_NOSNOOP_LAT	0x6
+#define  PCI_LTR_VALUE_MASK	0x000003ff
+#define  PCI_LTR_SCALE_MASK	0x00001c00
+#define  PCI_LTR_SCALE_SHIFT	10
+#define PCI_EXT_CAP_LTR_SIZEOF	8
+
+/* Access Control Service */
+#define PCI_ACS_CAP		0x04	/* ACS Capability Register */
+#define  PCI_ACS_SV		0x01	/* Source Validation */
+#define  PCI_ACS_TB		0x02	/* Translation Blocking */
+#define  PCI_ACS_RR		0x04	/* P2P Request Redirect */
+#define  PCI_ACS_CR		0x08	/* P2P Completion Redirect */
+#define  PCI_ACS_UF		0x10	/* Upstream Forwarding */
+#define  PCI_ACS_EC		0x20	/* P2P Egress Control */
+#define  PCI_ACS_DT		0x40	/* Direct Translated P2P */
+#define PCI_ACS_EGRESS_BITS	0x05	/* ACS Egress Control Vector Size */
+#define PCI_ACS_CTRL		0x06	/* ACS Control Register */
+#define PCI_ACS_EGRESS_CTL_V	0x08	/* ACS Egress Control Vector */
+
+#define PCI_VSEC_HDR		4	/* extended cap - vendor-specific */
+#define  PCI_VSEC_HDR_LEN_SHIFT	20	/* shift for length field */
+
+/* SATA capability */
+#define PCI_SATA_REGS		4	/* SATA REGs specifier */
+#define  PCI_SATA_REGS_MASK	0xF	/* location - BAR#/inline */
+#define  PCI_SATA_REGS_INLINE	0xF	/* REGS in config space */
+#define PCI_SATA_SIZEOF_SHORT	8
+#define PCI_SATA_SIZEOF_LONG	16
+
+/* Resizable BARs */
+#define PCI_REBAR_CTRL		8	/* control register */
+#define  PCI_REBAR_CTRL_NBAR_MASK	(7 << 5)	/* mask for # bars */
+#define  PCI_REBAR_CTRL_NBAR_SHIFT	5	/* shift for # bars */
+
+/* Dynamic Power Allocation */
+#define PCI_DPA_CAP		4	/* capability register */
+#define  PCI_DPA_CAP_SUBSTATE_MASK	0x1F	/* # substates - 1 */
+#define PCI_DPA_BASE_SIZEOF	16	/* size with 0 substates */
+
+/* TPH Requester */
+#define PCI_TPH_CAP		4	/* capability register */
+#define  PCI_TPH_CAP_LOC_MASK	0x600	/* location mask */
+#define   PCI_TPH_LOC_NONE	0x000	/* no location */
+#define   PCI_TPH_LOC_CAP	0x200	/* in capability */
+#define   PCI_TPH_LOC_MSIX	0x400	/* in MSI-X */
+#define PCI_TPH_CAP_ST_MASK	0x07FF0000	/* st table mask */
+#define PCI_TPH_CAP_ST_SHIFT	16	/* st table shift */
+#define PCI_TPH_BASE_SIZEOF	12	/* size with no st table */
+
+#endif /* LINUX_PCI_REGS_H */
-- 
2.4.3