From: "Lothar Waßmann" <LW@KARO-electronics.de>
To: "Anson Huang" <b20788@freescale.com>,
"Bai Ping" <b51503@freescale.com>,
"Frank Li" <Frank.Li@freescale.com>,
"Fugang Duan" <B38611@freescale.com>,
"Ian Campbell" <ijc+devicetree@hellion.org.uk>,
"Kumar Gala" <galak@codeaurora.org>,
"Lothar Waßmann" <LW@KARO-electronics.de>,
"Mark Rutland" <mark.rutland@arm.com>,
"Michael Turquette" <mturquette@baylibre.com>,
"Pawel Moll" <pawel.moll@arm.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Russell King" <linux@arm.linux.org.uk>,
"Sascha Hauer" <kernel@pengutronix.de>,
"Shawn Guo" <shawnguo@kernel.org>,
"Stephen Boyd" <sboyd@codeaurora.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCHv2 13/16] clk: imx: whitespace cleanup; no functional change
Date: Wed, 20 Jan 2016 11:09:06 +0100 [thread overview]
Message-ID: <1453284549-16363-14-git-send-email-LW@KARO-electronics.de> (raw)
In-Reply-To: <1453284549-16363-1-git-send-email-LW@KARO-electronics.de>
remove whitespace before TAB.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
drivers/clk/imx/clk-imx6ul.c | 62 ++++++-------
include/dt-bindings/clock/imx6ul-clock.h | 146 +++++++++++++++----------------
2 files changed, 104 insertions(+), 104 deletions(-)
diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c
index 08692d7..3e31ec0 100644
--- a/drivers/clk/imx/clk-imx6ul.c
+++ b/drivers/clk/imx/clk-imx6ul.c
@@ -157,9 +157,9 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
clk_set_parent(clks[IMX6UL_PLL7_BYPASS], clks[IMX6UL_CLK_PLL7]);
clks[IMX6UL_CLK_PLL1_SYS] = imx_clk_fixed_factor("pll1_sys", "pll1_bypass", 1, 1);
- clks[IMX6UL_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", base + 0x30, 13);
- clks[IMX6UL_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13);
- clks[IMX6UL_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", base + 0x70, 13);
+ clks[IMX6UL_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", base + 0x30, 13);
+ clks[IMX6UL_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13);
+ clks[IMX6UL_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", base + 0x70, 13);
clks[IMX6UL_CLK_PLL5_VIDEO] = imx_clk_gate("pll5_video", "pll5_bypass", base + 0xa0, 13);
clks[IMX6UL_CLK_PLL6_ENET] = imx_clk_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13);
clks[IMX6UL_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13);
@@ -196,8 +196,8 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
base + 0xe0, 2, 2, 0, clk_enet_ref_table, &imx_ccm_lock);
clks[IMX6UL_CLK_ENET2_REF_125M] = imx_clk_gate("enet_ref_125m", "enet2_ref", base + 0xe0, 20);
- clks[IMX6UL_CLK_ENET_PTP_REF] = imx_clk_fixed_factor("enet_ptp_ref", "pll6_enet", 1, 20);
- clks[IMX6UL_CLK_ENET_PTP] = imx_clk_gate("enet_ptp", "enet_ptp_ref", base + 0xe0, 21);
+ clks[IMX6UL_CLK_ENET_PTP_REF] = imx_clk_fixed_factor("enet_ptp_ref", "pll6_enet", 1, 20);
+ clks[IMX6UL_CLK_ENET_PTP] = imx_clk_gate("enet_ptp", "enet_ptp_ref", base + 0xe0, 21);
clks[IMX6UL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio",
CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
@@ -210,8 +210,8 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
/* name parent_name mult div */
clks[IMX6UL_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2);
- clks[IMX6UL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6);
- clks[IMX6UL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
+ clks[IMX6UL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6);
+ clks[IMX6UL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
clks[IMX6UL_CLK_GPT_3M] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8);
np = ccm_node;
@@ -219,34 +219,34 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
WARN_ON(!base);
clks[IMX6UL_CA7_SECONDARY_SEL] = imx_clk_mux("ca7_secondary_sel", base + 0xc, 3, 1, ca7_secondary_sels, ARRAY_SIZE(ca7_secondary_sels));
- clks[IMX6UL_CLK_STEP] = imx_clk_mux("step", base + 0x0c, 8, 1, step_sels, ARRAY_SIZE(step_sels));
- clks[IMX6UL_CLK_PLL1_SW] = imx_clk_mux_flags("pll1_sw", base + 0x0c, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels), 0);
+ clks[IMX6UL_CLK_STEP] = imx_clk_mux("step", base + 0x0c, 8, 1, step_sels, ARRAY_SIZE(step_sels));
+ clks[IMX6UL_CLK_PLL1_SW] = imx_clk_mux_flags("pll1_sw", base + 0x0c, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels), 0);
clks[IMX6UL_CLK_AXI_ALT_SEL] = imx_clk_mux("axi_alt_sel", base + 0x14, 7, 1, axi_alt_sels, ARRAY_SIZE(axi_alt_sels));
- clks[IMX6UL_CLK_AXI_SEL] = imx_clk_mux_flags("axi_sel", base + 0x14, 6, 1, axi_sels, ARRAY_SIZE(axi_sels), 0);
- clks[IMX6UL_CLK_PERIPH_PRE] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
- clks[IMX6UL_CLK_PERIPH2_PRE] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph2_pre_sels, ARRAY_SIZE(periph2_pre_sels));
+ clks[IMX6UL_CLK_AXI_SEL] = imx_clk_mux_flags("axi_sel", base + 0x14, 6, 1, axi_sels, ARRAY_SIZE(axi_sels), 0);
+ clks[IMX6UL_CLK_PERIPH_PRE] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
+ clks[IMX6UL_CLK_PERIPH2_PRE] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph2_pre_sels, ARRAY_SIZE(periph2_pre_sels));
clks[IMX6UL_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
clks[IMX6UL_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
- clks[IMX6UL_CLK_EIM_SLOW_SEL] = imx_clk_mux("eim_slow_sel", base + 0x1c, 29, 2, eim_slow_sels, ARRAY_SIZE(eim_slow_sels));
+ clks[IMX6UL_CLK_EIM_SLOW_SEL] = imx_clk_mux("eim_slow_sel", base + 0x1c, 29, 2, eim_slow_sels, ARRAY_SIZE(eim_slow_sels));
clks[IMX6UL_CLK_GPMI_SEL] = imx_clk_mux("gpmi_sel", base + 0x1c, 19, 1, gpmi_sels, ARRAY_SIZE(gpmi_sels));
- clks[IMX6UL_CLK_BCH_SEL] = imx_clk_mux("bch_sel", base + 0x1c, 18, 1, bch_sels, ARRAY_SIZE(bch_sels));
+ clks[IMX6UL_CLK_BCH_SEL] = imx_clk_mux("bch_sel", base + 0x1c, 18, 1, bch_sels, ARRAY_SIZE(bch_sels));
clks[IMX6UL_CLK_USDHC2_SEL] = imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
clks[IMX6UL_CLK_USDHC1_SEL] = imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
- clks[IMX6UL_CLK_SAI3_SEL] = imx_clk_mux("sai3_sel", base + 0x1c, 14, 2, sai_sels, ARRAY_SIZE(sai_sels));
+ clks[IMX6UL_CLK_SAI3_SEL] = imx_clk_mux("sai3_sel", base + 0x1c, 14, 2, sai_sels, ARRAY_SIZE(sai_sels));
clks[IMX6UL_CLK_SAI2_SEL] = imx_clk_mux("sai2_sel", base + 0x1c, 12, 2, sai_sels, ARRAY_SIZE(sai_sels));
- clks[IMX6UL_CLK_SAI1_SEL] = imx_clk_mux("sai1_sel", base + 0x1c, 10, 2, sai_sels, ARRAY_SIZE(sai_sels));
- clks[IMX6UL_CLK_QSPI1_SEL] = imx_clk_mux("qspi1_sel", base + 0x1c, 7, 3, qspi1_sels, ARRAY_SIZE(qspi1_sels));
- clks[IMX6UL_CLK_PERCLK_SEL] = imx_clk_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels));
- clks[IMX6UL_CLK_CAN_SEL] = imx_clk_mux("can_sel", base + 0x20, 8, 2, can_sels, ARRAY_SIZE(can_sels));
+ clks[IMX6UL_CLK_SAI1_SEL] = imx_clk_mux("sai1_sel", base + 0x1c, 10, 2, sai_sels, ARRAY_SIZE(sai_sels));
+ clks[IMX6UL_CLK_QSPI1_SEL] = imx_clk_mux("qspi1_sel", base + 0x1c, 7, 3, qspi1_sels, ARRAY_SIZE(qspi1_sels));
+ clks[IMX6UL_CLK_PERCLK_SEL] = imx_clk_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels));
+ clks[IMX6UL_CLK_CAN_SEL] = imx_clk_mux("can_sel", base + 0x20, 8, 2, can_sels, ARRAY_SIZE(can_sels));
clks[IMX6UL_CLK_UART_SEL] = imx_clk_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels));
clks[IMX6UL_CLK_ENFC_SEL] = imx_clk_mux("enfc_sel", base + 0x2c, 15, 3, enfc_sels, ARRAY_SIZE(enfc_sels));
clks[IMX6UL_CLK_LDB_DI0_SEL] = imx_clk_mux("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di0_sels, ARRAY_SIZE(ldb_di0_sels));
clks[IMX6UL_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, spdif_sels, ARRAY_SIZE(spdif_sels));
- clks[IMX6UL_CLK_SIM_PRE_SEL] = imx_clk_mux("sim_pre_sel", base + 0x34, 15, 3, sim_pre_sels, ARRAY_SIZE(sim_pre_sels));
- clks[IMX6UL_CLK_SIM_SEL] = imx_clk_mux("sim_sel", base + 0x34, 9, 3, sim_sels, ARRAY_SIZE(sim_sels));
+ clks[IMX6UL_CLK_SIM_PRE_SEL] = imx_clk_mux("sim_pre_sel", base + 0x34, 15, 3, sim_pre_sels, ARRAY_SIZE(sim_pre_sels));
+ clks[IMX6UL_CLK_SIM_SEL] = imx_clk_mux("sim_sel", base + 0x34, 9, 3, sim_sels, ARRAY_SIZE(sim_sels));
clks[IMX6UL_CLK_ECSPI_SEL] = imx_clk_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels));
clks[IMX6UL_CLK_LCDIF_PRE_SEL] = imx_clk_mux("lcdif_pre_sel", base + 0x38, 15, 3, lcdif_pre_sels, ARRAY_SIZE(lcdif_pre_sels));
- clks[IMX6UL_CLK_LCDIF_SEL] = imx_clk_mux("lcdif_sel", base + 0x38, 9, 3, lcdif_sels, ARRAY_SIZE(lcdif_sels));
+ clks[IMX6UL_CLK_LCDIF_SEL] = imx_clk_mux("lcdif_sel", base + 0x38, 9, 3, lcdif_sels, ARRAY_SIZE(lcdif_sels));
clks[IMX6UL_CLK_LDB_DI0_DIV_SEL] = imx_clk_mux("ldb_di0", base + 0x20, 10, 1, ldb_di0_div_sels, ARRAY_SIZE(ldb_di0_div_sels));
clks[IMX6UL_CLK_LDB_DI1_DIV_SEL] = imx_clk_mux("ldb_di1", base + 0x20, 11, 1, ldb_di1_div_sels, ARRAY_SIZE(ldb_di1_div_sels));
@@ -259,11 +259,11 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
clks[IMX6UL_CLK_PERIPH] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels));
clks[IMX6UL_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels));
- clks[IMX6UL_CLK_PERIPH_CLK2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3);
- clks[IMX6UL_CLK_PERIPH2_CLK2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3);
+ clks[IMX6UL_CLK_PERIPH_CLK2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3);
+ clks[IMX6UL_CLK_PERIPH2_CLK2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3);
clks[IMX6UL_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2);
clks[IMX6UL_CLK_LCDIF_PODF] = imx_clk_divider("lcdif_podf", "lcdif_pred", base + 0x18, 23, 3);
- clks[IMX6UL_CLK_QSPI1_PDOF] = imx_clk_divider("qspi1_podf", "qspi1_sel", base + 0x1c, 26, 3);
+ clks[IMX6UL_CLK_QSPI1_PDOF] = imx_clk_divider("qspi1_podf", "qspi1_sel", base + 0x1c, 26, 3);
clks[IMX6UL_CLK_EIM_SLOW_PODF] = imx_clk_divider("eim_slow_podf", "eim_slow_sel", base + 0x1c, 23, 3);
clks[IMX6UL_CLK_PERCLK] = imx_clk_divider("perclk", "perclk_sel", base + 0x1c, 0, 6);
clks[IMX6UL_CLK_CAN_PODF] = imx_clk_divider("can_podf", "can_sel", base + 0x20, 2, 6);
@@ -287,14 +287,14 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
clks[IMX6UL_CLK_LCDIF_PRED] = imx_clk_divider("lcdif_pred", "lcdif_pre_sel", base + 0x38, 12, 3);
clks[IMX6UL_CLK_CSI_PODF] = imx_clk_divider("csi_podf", "csi_sel", base + 0x3c, 11, 3);
- clks[IMX6UL_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16);
+ clks[IMX6UL_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16);
clks[IMX6UL_CLK_MMDC_PODF] = imx_clk_busy_divider("mmdc_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2);
clks[IMX6UL_CLK_AXI_PODF] = imx_clk_busy_divider("axi_podf", "axi_sel", base + 0x14, 16, 3, base + 0x48, 0);
clks[IMX6UL_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1);
/* CCGR0 */
- clks[IMX6UL_CLK_AIPSTZ1] = imx_clk_gate2("aips_tz1", "ahb", base + 0x68, 0);
- clks[IMX6UL_CLK_AIPSTZ2] = imx_clk_gate2("aips_tz2", "ahb", base + 0x68, 2);
+ clks[IMX6UL_CLK_AIPSTZ1] = imx_clk_gate2("aips_tz1", "ahb", base + 0x68, 0);
+ clks[IMX6UL_CLK_AIPSTZ2] = imx_clk_gate2("aips_tz2", "ahb", base + 0x68, 2);
clks[IMX6UL_CLK_APBHDMA] = imx_clk_gate2("apbh_dma", "bch_podf", base + 0x68, 4);
clks[IMX6UL_CLK_ASRC_IPG] = imx_clk_gate2_shared("asrc_ipg", "ahb", base + 0x68, 6, &share_count_asrc);
clks[IMX6UL_CLK_ASRC_MEM] = imx_clk_gate2_shared("asrc_mem", "ahb", base + 0x68, 6, &share_count_asrc);
@@ -302,7 +302,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
clks[IMX6UL_CLK_CAAM_ACLK] = imx_clk_gate2("caam_aclk", "ahb", base + 0x68, 10);
clks[IMX6UL_CLK_CAAM_IPG] = imx_clk_gate2("caam_ipg", "ipg", base + 0x68, 12);
clks[IMX6UL_CLK_CAN1_IPG] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14);
- clks[IMX6UL_CLK_CAN1_SERIAL] = imx_clk_gate2("can1_serial", "can_podf", base + 0x68, 16);
+ clks[IMX6UL_CLK_CAN1_SERIAL] = imx_clk_gate2("can1_serial", "can_podf", base + 0x68, 16);
clks[IMX6UL_CLK_CAN2_IPG] = imx_clk_gate2("can2_ipg", "ipg", base + 0x68, 18);
clks[IMX6UL_CLK_CAN2_SERIAL] = imx_clk_gate2("can2_serial", "can_podf", base + 0x68, 20);
clks[IMX6UL_CLK_GPT2_BUS] = imx_clk_gate2("gpt_bus", "perclk", base + 0x68, 24);
@@ -331,7 +331,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
clks[IMX6UL_CLK_CSI] = imx_clk_gate2("csi", "csi_podf", base + 0x70, 2);
clks[IMX6UL_CLK_I2C1] = imx_clk_gate2("i2c1", "perclk", base + 0x70, 6);
clks[IMX6UL_CLK_I2C2] = imx_clk_gate2("i2c2", "perclk", base + 0x70, 8);
- clks[IMX6UL_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10);
+ clks[IMX6UL_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10);
clks[IMX6UL_CLK_OCOTP] = imx_clk_gate2("ocotp", "ipg", base + 0x70, 12);
clks[IMX6UL_CLK_IOMUXC] = imx_clk_gate2("iomuxc", "lcdif_podf", base + 0x70, 14);
clks[IMX6UL_CLK_LCDIF_APB] = imx_clk_gate2("lcdif_apb", "axi", base + 0x70, 28);
@@ -391,7 +391,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
clks[IMX6UL_CLK_UART8_IPG] = imx_clk_gate2("uart8_ipg", "ipg", base + 0x80, 14);
clks[IMX6UL_CLK_UART8_SERIAL] = imx_clk_gate2("uart8_serial", "uart_podf", base + 0x80, 14);
clks[IMX6UL_CLK_WDOG3] = imx_clk_gate2("wdog3", "ipg", base + 0x80, 20);
- clks[IMX6UL_CLK_I2C4] = imx_clk_gate2("i2c4", "perclk", base + 0x80, 24);
+ clks[IMX6UL_CLK_I2C4] = imx_clk_gate2("i2c4", "perclk", base + 0x80, 24);
clks[IMX6UL_CLK_PWM5] = imx_clk_gate2("pwm5", "perclk", base + 0x80, 26);
clks[IMX6UL_CLK_PWM6] = imx_clk_gate2("pwm6", "perclk", base + 0x80, 28);
clks[IMX6UL_CLK_PWM7] = imx_clk_gate2("Pwm7", "perclk", base + 0x80, 30);
diff --git a/include/dt-bindings/clock/imx6ul-clock.h b/include/dt-bindings/clock/imx6ul-clock.h
index c343894..08ce4a7 100644
--- a/include/dt-bindings/clock/imx6ul-clock.h
+++ b/include/dt-bindings/clock/imx6ul-clock.h
@@ -21,13 +21,13 @@
#define IMX6UL_PLL5_BYPASS_SRC 8
#define IMX6UL_PLL6_BYPASS_SRC 9
#define IMX6UL_PLL7_BYPASS_SRC 10
-#define IMX6UL_CLK_PLL1 11
-#define IMX6UL_CLK_PLL2 12
-#define IMX6UL_CLK_PLL3 13
-#define IMX6UL_CLK_PLL4 14
-#define IMX6UL_CLK_PLL5 15
-#define IMX6UL_CLK_PLL6 16
-#define IMX6UL_CLK_PLL7 17
+#define IMX6UL_CLK_PLL1 11
+#define IMX6UL_CLK_PLL2 12
+#define IMX6UL_CLK_PLL3 13
+#define IMX6UL_CLK_PLL4 14
+#define IMX6UL_CLK_PLL5 15
+#define IMX6UL_CLK_PLL6 16
+#define IMX6UL_CLK_PLL7 17
#define IMX6UL_PLL1_BYPASS 18
#define IMX6UL_PLL2_BYPASS 19
#define IMX6UL_PLL3_BYPASS 20
@@ -37,7 +37,7 @@
#define IMX6UL_PLL7_BYPASS 24
#define IMX6UL_CLK_PLL1_SYS 25
#define IMX6UL_CLK_PLL2_BUS 26
-#define IMX6UL_CLK_PLL3_USB_OTG 27
+#define IMX6UL_CLK_PLL3_USB_OTG 27
#define IMX6UL_CLK_PLL4_AUDIO 28
#define IMX6UL_CLK_PLL5_VIDEO 29
#define IMX6UL_CLK_PLL6_ENET 30
@@ -66,7 +66,7 @@
#define IMX6UL_CLK_PLL2_198M 53
#define IMX6UL_CLK_PLL3_80M 54
#define IMX6UL_CLK_PLL3_60M 55
-#define IMX6UL_CLK_STEP 56
+#define IMX6UL_CLK_STEP 56
#define IMX6UL_CLK_PLL1_SW 57
#define IMX6UL_CLK_AXI_ALT_SEL 58
#define IMX6UL_CLK_AXI_SEL 59
@@ -78,7 +78,7 @@
#define IMX6UL_CLK_USDHC2_SEL 65
#define IMX6UL_CLK_BCH_SEL 66
#define IMX6UL_CLK_GPMI_SEL 67
-#define IMX6UL_CLK_EIM_SLOW_SEL 68
+#define IMX6UL_CLK_EIM_SLOW_SEL 68
#define IMX6UL_CLK_SPDIF_SEL 69
#define IMX6UL_CLK_SAI1_SEL 70
#define IMX6UL_CLK_SAI2_SEL 71
@@ -105,9 +105,9 @@
#define IMX6UL_CLK_LDB_DI1_DIV_SEL 92
#define IMX6UL_CLK_ARM 93
#define IMX6UL_CLK_PERIPH_CLK2 94
-#define IMX6UL_CLK_PERIPH2_CLK2 95
+#define IMX6UL_CLK_PERIPH2_CLK2 95
#define IMX6UL_CLK_AHB 96
-#define IMX6UL_CLK_MMDC_PODF 97
+#define IMX6UL_CLK_MMDC_PODF 97
#define IMX6UL_CLK_AXI_PODF 98
#define IMX6UL_CLK_PERCLK 99
#define IMX6UL_CLK_IPG 100
@@ -133,16 +133,16 @@
#define IMX6UL_CLK_CAN_PODF 120
#define IMX6UL_CLK_ECSPI_PODF 121
#define IMX6UL_CLK_UART_PODF 122
-#define IMX6UL_CLK_ADC1 123
-#define IMX6UL_CLK_ADC2 124
+#define IMX6UL_CLK_ADC1 123
+#define IMX6UL_CLK_ADC2 124
#define IMX6UL_CLK_AIPSTZ1 125
#define IMX6UL_CLK_AIPSTZ2 126
#define IMX6UL_CLK_AIPSTZ3 127
#define IMX6UL_CLK_APBHDMA 128
#define IMX6UL_CLK_ASRC_IPG 129
#define IMX6UL_CLK_ASRC_MEM 130
-#define IMX6UL_CLK_GPMI_BCH_APB 131
-#define IMX6UL_CLK_GPMI_BCH 132
+#define IMX6UL_CLK_GPMI_BCH_APB 131
+#define IMX6UL_CLK_GPMI_BCH 132
#define IMX6UL_CLK_GPMI_IO 133
#define IMX6UL_CLK_GPMI_APB 134
#define IMX6UL_CLK_CAAM_MEM 135
@@ -154,7 +154,7 @@
#define IMX6UL_CLK_ECSPI3 141
#define IMX6UL_CLK_ECSPI4 142
#define IMX6UL_CLK_EIM 143
-#define IMX6UL_CLK_ENET 144
+#define IMX6UL_CLK_ENET 144
#define IMX6UL_CLK_ENET_AHB 145
#define IMX6UL_CLK_EPIT1 146
#define IMX6UL_CLK_EPIT2 147
@@ -166,63 +166,63 @@
#define IMX6UL_CLK_GPT1_SERIAL 153
#define IMX6UL_CLK_GPT2_BUS 154
#define IMX6UL_CLK_GPT2_SERIAL 155
-#define IMX6UL_CLK_I2C1 156
-#define IMX6UL_CLK_I2C2 157
-#define IMX6UL_CLK_I2C3 158
-#define IMX6UL_CLK_I2C4 159
-#define IMX6UL_CLK_IOMUXC 160
-#define IMX6UL_CLK_LCDIF_APB 161
-#define IMX6UL_CLK_LCDIF_PIX 162
-#define IMX6UL_CLK_MMDC_P0_FAST 163
-#define IMX6UL_CLK_MMDC_P0_IPG 164
-#define IMX6UL_CLK_OCOTP 165
-#define IMX6UL_CLK_OCRAM 166
-#define IMX6UL_CLK_PWM1 167
-#define IMX6UL_CLK_PWM2 168
-#define IMX6UL_CLK_PWM3 169
-#define IMX6UL_CLK_PWM4 170
-#define IMX6UL_CLK_PWM5 171
-#define IMX6UL_CLK_PWM6 172
-#define IMX6UL_CLK_PWM7 173
-#define IMX6UL_CLK_PWM8 174
-#define IMX6UL_CLK_PXP 175
-#define IMX6UL_CLK_QSPI 176
-#define IMX6UL_CLK_ROM 177
-#define IMX6UL_CLK_SAI1 178
-#define IMX6UL_CLK_SAI1_IPG 179
-#define IMX6UL_CLK_SAI2 180
-#define IMX6UL_CLK_SAI2_IPG 181
-#define IMX6UL_CLK_SAI3 182
-#define IMX6UL_CLK_SAI3_IPG 183
-#define IMX6UL_CLK_SDMA 184
-#define IMX6UL_CLK_SIM 185
-#define IMX6UL_CLK_SIM_S 186
-#define IMX6UL_CLK_SPBA 187
-#define IMX6UL_CLK_SPDIF 188
-#define IMX6UL_CLK_UART1_IPG 189
-#define IMX6UL_CLK_UART1_SERIAL 190
-#define IMX6UL_CLK_UART2_IPG 191
-#define IMX6UL_CLK_UART2_SERIAL 192
-#define IMX6UL_CLK_UART3_IPG 193
-#define IMX6UL_CLK_UART3_SERIAL 194
-#define IMX6UL_CLK_UART4_IPG 195
-#define IMX6UL_CLK_UART4_SERIAL 196
-#define IMX6UL_CLK_UART5_IPG 197
-#define IMX6UL_CLK_UART5_SERIAL 198
-#define IMX6UL_CLK_UART6_IPG 199
-#define IMX6UL_CLK_UART6_SERIAL 200
-#define IMX6UL_CLK_UART7_IPG 201
-#define IMX6UL_CLK_UART7_SERIAL 202
-#define IMX6UL_CLK_UART8_IPG 203
-#define IMX6UL_CLK_UART8_SERIAL 204
-#define IMX6UL_CLK_USBOH3 205
-#define IMX6UL_CLK_USDHC1 206
-#define IMX6UL_CLK_USDHC2 207
-#define IMX6UL_CLK_WDOG1 208
-#define IMX6UL_CLK_WDOG2 209
-#define IMX6UL_CLK_WDOG3 210
+#define IMX6UL_CLK_I2C1 156
+#define IMX6UL_CLK_I2C2 157
+#define IMX6UL_CLK_I2C3 158
+#define IMX6UL_CLK_I2C4 159
+#define IMX6UL_CLK_IOMUXC 160
+#define IMX6UL_CLK_LCDIF_APB 161
+#define IMX6UL_CLK_LCDIF_PIX 162
+#define IMX6UL_CLK_MMDC_P0_FAST 163
+#define IMX6UL_CLK_MMDC_P0_IPG 164
+#define IMX6UL_CLK_OCOTP 165
+#define IMX6UL_CLK_OCRAM 166
+#define IMX6UL_CLK_PWM1 167
+#define IMX6UL_CLK_PWM2 168
+#define IMX6UL_CLK_PWM3 169
+#define IMX6UL_CLK_PWM4 170
+#define IMX6UL_CLK_PWM5 171
+#define IMX6UL_CLK_PWM6 172
+#define IMX6UL_CLK_PWM7 173
+#define IMX6UL_CLK_PWM8 174
+#define IMX6UL_CLK_PXP 175
+#define IMX6UL_CLK_QSPI 176
+#define IMX6UL_CLK_ROM 177
+#define IMX6UL_CLK_SAI1 178
+#define IMX6UL_CLK_SAI1_IPG 179
+#define IMX6UL_CLK_SAI2 180
+#define IMX6UL_CLK_SAI2_IPG 181
+#define IMX6UL_CLK_SAI3 182
+#define IMX6UL_CLK_SAI3_IPG 183
+#define IMX6UL_CLK_SDMA 184
+#define IMX6UL_CLK_SIM 185
+#define IMX6UL_CLK_SIM_S 186
+#define IMX6UL_CLK_SPBA 187
+#define IMX6UL_CLK_SPDIF 188
+#define IMX6UL_CLK_UART1_IPG 189
+#define IMX6UL_CLK_UART1_SERIAL 190
+#define IMX6UL_CLK_UART2_IPG 191
+#define IMX6UL_CLK_UART2_SERIAL 192
+#define IMX6UL_CLK_UART3_IPG 193
+#define IMX6UL_CLK_UART3_SERIAL 194
+#define IMX6UL_CLK_UART4_IPG 195
+#define IMX6UL_CLK_UART4_SERIAL 196
+#define IMX6UL_CLK_UART5_IPG 197
+#define IMX6UL_CLK_UART5_SERIAL 198
+#define IMX6UL_CLK_UART6_IPG 199
+#define IMX6UL_CLK_UART6_SERIAL 200
+#define IMX6UL_CLK_UART7_IPG 201
+#define IMX6UL_CLK_UART7_SERIAL 202
+#define IMX6UL_CLK_UART8_IPG 203
+#define IMX6UL_CLK_UART8_SERIAL 204
+#define IMX6UL_CLK_USBOH3 205
+#define IMX6UL_CLK_USDHC1 206
+#define IMX6UL_CLK_USDHC2 207
+#define IMX6UL_CLK_WDOG1 208
+#define IMX6UL_CLK_WDOG2 209
+#define IMX6UL_CLK_WDOG3 210
#define IMX6UL_CLK_LDB_DI0 211
-#define IMX6UL_CLK_AXI 212
+#define IMX6UL_CLK_AXI 212
#define IMX6UL_CLK_SPDIF_GCLK 213
#define IMX6UL_CLK_GPT_3M 214
#define IMX6UL_CLK_SIM2 215
--
2.1.4
WARNING: multiple messages have this Message-ID (diff)
From: LW@KARO-electronics.de (Lothar Waßmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2 13/16] clk: imx: whitespace cleanup; no functional change
Date: Wed, 20 Jan 2016 11:09:06 +0100 [thread overview]
Message-ID: <1453284549-16363-14-git-send-email-LW@KARO-electronics.de> (raw)
In-Reply-To: <1453284549-16363-1-git-send-email-LW@KARO-electronics.de>
remove whitespace before TAB.
Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de>
---
drivers/clk/imx/clk-imx6ul.c | 62 ++++++-------
include/dt-bindings/clock/imx6ul-clock.h | 146 +++++++++++++++----------------
2 files changed, 104 insertions(+), 104 deletions(-)
diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c
index 08692d7..3e31ec0 100644
--- a/drivers/clk/imx/clk-imx6ul.c
+++ b/drivers/clk/imx/clk-imx6ul.c
@@ -157,9 +157,9 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
clk_set_parent(clks[IMX6UL_PLL7_BYPASS], clks[IMX6UL_CLK_PLL7]);
clks[IMX6UL_CLK_PLL1_SYS] = imx_clk_fixed_factor("pll1_sys", "pll1_bypass", 1, 1);
- clks[IMX6UL_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", base + 0x30, 13);
- clks[IMX6UL_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13);
- clks[IMX6UL_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", base + 0x70, 13);
+ clks[IMX6UL_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", base + 0x30, 13);
+ clks[IMX6UL_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13);
+ clks[IMX6UL_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", base + 0x70, 13);
clks[IMX6UL_CLK_PLL5_VIDEO] = imx_clk_gate("pll5_video", "pll5_bypass", base + 0xa0, 13);
clks[IMX6UL_CLK_PLL6_ENET] = imx_clk_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13);
clks[IMX6UL_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13);
@@ -196,8 +196,8 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
base + 0xe0, 2, 2, 0, clk_enet_ref_table, &imx_ccm_lock);
clks[IMX6UL_CLK_ENET2_REF_125M] = imx_clk_gate("enet_ref_125m", "enet2_ref", base + 0xe0, 20);
- clks[IMX6UL_CLK_ENET_PTP_REF] = imx_clk_fixed_factor("enet_ptp_ref", "pll6_enet", 1, 20);
- clks[IMX6UL_CLK_ENET_PTP] = imx_clk_gate("enet_ptp", "enet_ptp_ref", base + 0xe0, 21);
+ clks[IMX6UL_CLK_ENET_PTP_REF] = imx_clk_fixed_factor("enet_ptp_ref", "pll6_enet", 1, 20);
+ clks[IMX6UL_CLK_ENET_PTP] = imx_clk_gate("enet_ptp", "enet_ptp_ref", base + 0xe0, 21);
clks[IMX6UL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio",
CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
@@ -210,8 +210,8 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
/* name parent_name mult div */
clks[IMX6UL_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2);
- clks[IMX6UL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6);
- clks[IMX6UL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
+ clks[IMX6UL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6);
+ clks[IMX6UL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
clks[IMX6UL_CLK_GPT_3M] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8);
np = ccm_node;
@@ -219,34 +219,34 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
WARN_ON(!base);
clks[IMX6UL_CA7_SECONDARY_SEL] = imx_clk_mux("ca7_secondary_sel", base + 0xc, 3, 1, ca7_secondary_sels, ARRAY_SIZE(ca7_secondary_sels));
- clks[IMX6UL_CLK_STEP] = imx_clk_mux("step", base + 0x0c, 8, 1, step_sels, ARRAY_SIZE(step_sels));
- clks[IMX6UL_CLK_PLL1_SW] = imx_clk_mux_flags("pll1_sw", base + 0x0c, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels), 0);
+ clks[IMX6UL_CLK_STEP] = imx_clk_mux("step", base + 0x0c, 8, 1, step_sels, ARRAY_SIZE(step_sels));
+ clks[IMX6UL_CLK_PLL1_SW] = imx_clk_mux_flags("pll1_sw", base + 0x0c, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels), 0);
clks[IMX6UL_CLK_AXI_ALT_SEL] = imx_clk_mux("axi_alt_sel", base + 0x14, 7, 1, axi_alt_sels, ARRAY_SIZE(axi_alt_sels));
- clks[IMX6UL_CLK_AXI_SEL] = imx_clk_mux_flags("axi_sel", base + 0x14, 6, 1, axi_sels, ARRAY_SIZE(axi_sels), 0);
- clks[IMX6UL_CLK_PERIPH_PRE] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
- clks[IMX6UL_CLK_PERIPH2_PRE] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph2_pre_sels, ARRAY_SIZE(periph2_pre_sels));
+ clks[IMX6UL_CLK_AXI_SEL] = imx_clk_mux_flags("axi_sel", base + 0x14, 6, 1, axi_sels, ARRAY_SIZE(axi_sels), 0);
+ clks[IMX6UL_CLK_PERIPH_PRE] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
+ clks[IMX6UL_CLK_PERIPH2_PRE] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph2_pre_sels, ARRAY_SIZE(periph2_pre_sels));
clks[IMX6UL_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
clks[IMX6UL_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
- clks[IMX6UL_CLK_EIM_SLOW_SEL] = imx_clk_mux("eim_slow_sel", base + 0x1c, 29, 2, eim_slow_sels, ARRAY_SIZE(eim_slow_sels));
+ clks[IMX6UL_CLK_EIM_SLOW_SEL] = imx_clk_mux("eim_slow_sel", base + 0x1c, 29, 2, eim_slow_sels, ARRAY_SIZE(eim_slow_sels));
clks[IMX6UL_CLK_GPMI_SEL] = imx_clk_mux("gpmi_sel", base + 0x1c, 19, 1, gpmi_sels, ARRAY_SIZE(gpmi_sels));
- clks[IMX6UL_CLK_BCH_SEL] = imx_clk_mux("bch_sel", base + 0x1c, 18, 1, bch_sels, ARRAY_SIZE(bch_sels));
+ clks[IMX6UL_CLK_BCH_SEL] = imx_clk_mux("bch_sel", base + 0x1c, 18, 1, bch_sels, ARRAY_SIZE(bch_sels));
clks[IMX6UL_CLK_USDHC2_SEL] = imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
clks[IMX6UL_CLK_USDHC1_SEL] = imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
- clks[IMX6UL_CLK_SAI3_SEL] = imx_clk_mux("sai3_sel", base + 0x1c, 14, 2, sai_sels, ARRAY_SIZE(sai_sels));
+ clks[IMX6UL_CLK_SAI3_SEL] = imx_clk_mux("sai3_sel", base + 0x1c, 14, 2, sai_sels, ARRAY_SIZE(sai_sels));
clks[IMX6UL_CLK_SAI2_SEL] = imx_clk_mux("sai2_sel", base + 0x1c, 12, 2, sai_sels, ARRAY_SIZE(sai_sels));
- clks[IMX6UL_CLK_SAI1_SEL] = imx_clk_mux("sai1_sel", base + 0x1c, 10, 2, sai_sels, ARRAY_SIZE(sai_sels));
- clks[IMX6UL_CLK_QSPI1_SEL] = imx_clk_mux("qspi1_sel", base + 0x1c, 7, 3, qspi1_sels, ARRAY_SIZE(qspi1_sels));
- clks[IMX6UL_CLK_PERCLK_SEL] = imx_clk_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels));
- clks[IMX6UL_CLK_CAN_SEL] = imx_clk_mux("can_sel", base + 0x20, 8, 2, can_sels, ARRAY_SIZE(can_sels));
+ clks[IMX6UL_CLK_SAI1_SEL] = imx_clk_mux("sai1_sel", base + 0x1c, 10, 2, sai_sels, ARRAY_SIZE(sai_sels));
+ clks[IMX6UL_CLK_QSPI1_SEL] = imx_clk_mux("qspi1_sel", base + 0x1c, 7, 3, qspi1_sels, ARRAY_SIZE(qspi1_sels));
+ clks[IMX6UL_CLK_PERCLK_SEL] = imx_clk_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels));
+ clks[IMX6UL_CLK_CAN_SEL] = imx_clk_mux("can_sel", base + 0x20, 8, 2, can_sels, ARRAY_SIZE(can_sels));
clks[IMX6UL_CLK_UART_SEL] = imx_clk_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels));
clks[IMX6UL_CLK_ENFC_SEL] = imx_clk_mux("enfc_sel", base + 0x2c, 15, 3, enfc_sels, ARRAY_SIZE(enfc_sels));
clks[IMX6UL_CLK_LDB_DI0_SEL] = imx_clk_mux("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di0_sels, ARRAY_SIZE(ldb_di0_sels));
clks[IMX6UL_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, spdif_sels, ARRAY_SIZE(spdif_sels));
- clks[IMX6UL_CLK_SIM_PRE_SEL] = imx_clk_mux("sim_pre_sel", base + 0x34, 15, 3, sim_pre_sels, ARRAY_SIZE(sim_pre_sels));
- clks[IMX6UL_CLK_SIM_SEL] = imx_clk_mux("sim_sel", base + 0x34, 9, 3, sim_sels, ARRAY_SIZE(sim_sels));
+ clks[IMX6UL_CLK_SIM_PRE_SEL] = imx_clk_mux("sim_pre_sel", base + 0x34, 15, 3, sim_pre_sels, ARRAY_SIZE(sim_pre_sels));
+ clks[IMX6UL_CLK_SIM_SEL] = imx_clk_mux("sim_sel", base + 0x34, 9, 3, sim_sels, ARRAY_SIZE(sim_sels));
clks[IMX6UL_CLK_ECSPI_SEL] = imx_clk_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels));
clks[IMX6UL_CLK_LCDIF_PRE_SEL] = imx_clk_mux("lcdif_pre_sel", base + 0x38, 15, 3, lcdif_pre_sels, ARRAY_SIZE(lcdif_pre_sels));
- clks[IMX6UL_CLK_LCDIF_SEL] = imx_clk_mux("lcdif_sel", base + 0x38, 9, 3, lcdif_sels, ARRAY_SIZE(lcdif_sels));
+ clks[IMX6UL_CLK_LCDIF_SEL] = imx_clk_mux("lcdif_sel", base + 0x38, 9, 3, lcdif_sels, ARRAY_SIZE(lcdif_sels));
clks[IMX6UL_CLK_LDB_DI0_DIV_SEL] = imx_clk_mux("ldb_di0", base + 0x20, 10, 1, ldb_di0_div_sels, ARRAY_SIZE(ldb_di0_div_sels));
clks[IMX6UL_CLK_LDB_DI1_DIV_SEL] = imx_clk_mux("ldb_di1", base + 0x20, 11, 1, ldb_di1_div_sels, ARRAY_SIZE(ldb_di1_div_sels));
@@ -259,11 +259,11 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
clks[IMX6UL_CLK_PERIPH] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels));
clks[IMX6UL_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels));
- clks[IMX6UL_CLK_PERIPH_CLK2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3);
- clks[IMX6UL_CLK_PERIPH2_CLK2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3);
+ clks[IMX6UL_CLK_PERIPH_CLK2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3);
+ clks[IMX6UL_CLK_PERIPH2_CLK2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3);
clks[IMX6UL_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2);
clks[IMX6UL_CLK_LCDIF_PODF] = imx_clk_divider("lcdif_podf", "lcdif_pred", base + 0x18, 23, 3);
- clks[IMX6UL_CLK_QSPI1_PDOF] = imx_clk_divider("qspi1_podf", "qspi1_sel", base + 0x1c, 26, 3);
+ clks[IMX6UL_CLK_QSPI1_PDOF] = imx_clk_divider("qspi1_podf", "qspi1_sel", base + 0x1c, 26, 3);
clks[IMX6UL_CLK_EIM_SLOW_PODF] = imx_clk_divider("eim_slow_podf", "eim_slow_sel", base + 0x1c, 23, 3);
clks[IMX6UL_CLK_PERCLK] = imx_clk_divider("perclk", "perclk_sel", base + 0x1c, 0, 6);
clks[IMX6UL_CLK_CAN_PODF] = imx_clk_divider("can_podf", "can_sel", base + 0x20, 2, 6);
@@ -287,14 +287,14 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
clks[IMX6UL_CLK_LCDIF_PRED] = imx_clk_divider("lcdif_pred", "lcdif_pre_sel", base + 0x38, 12, 3);
clks[IMX6UL_CLK_CSI_PODF] = imx_clk_divider("csi_podf", "csi_sel", base + 0x3c, 11, 3);
- clks[IMX6UL_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16);
+ clks[IMX6UL_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16);
clks[IMX6UL_CLK_MMDC_PODF] = imx_clk_busy_divider("mmdc_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2);
clks[IMX6UL_CLK_AXI_PODF] = imx_clk_busy_divider("axi_podf", "axi_sel", base + 0x14, 16, 3, base + 0x48, 0);
clks[IMX6UL_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1);
/* CCGR0 */
- clks[IMX6UL_CLK_AIPSTZ1] = imx_clk_gate2("aips_tz1", "ahb", base + 0x68, 0);
- clks[IMX6UL_CLK_AIPSTZ2] = imx_clk_gate2("aips_tz2", "ahb", base + 0x68, 2);
+ clks[IMX6UL_CLK_AIPSTZ1] = imx_clk_gate2("aips_tz1", "ahb", base + 0x68, 0);
+ clks[IMX6UL_CLK_AIPSTZ2] = imx_clk_gate2("aips_tz2", "ahb", base + 0x68, 2);
clks[IMX6UL_CLK_APBHDMA] = imx_clk_gate2("apbh_dma", "bch_podf", base + 0x68, 4);
clks[IMX6UL_CLK_ASRC_IPG] = imx_clk_gate2_shared("asrc_ipg", "ahb", base + 0x68, 6, &share_count_asrc);
clks[IMX6UL_CLK_ASRC_MEM] = imx_clk_gate2_shared("asrc_mem", "ahb", base + 0x68, 6, &share_count_asrc);
@@ -302,7 +302,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
clks[IMX6UL_CLK_CAAM_ACLK] = imx_clk_gate2("caam_aclk", "ahb", base + 0x68, 10);
clks[IMX6UL_CLK_CAAM_IPG] = imx_clk_gate2("caam_ipg", "ipg", base + 0x68, 12);
clks[IMX6UL_CLK_CAN1_IPG] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14);
- clks[IMX6UL_CLK_CAN1_SERIAL] = imx_clk_gate2("can1_serial", "can_podf", base + 0x68, 16);
+ clks[IMX6UL_CLK_CAN1_SERIAL] = imx_clk_gate2("can1_serial", "can_podf", base + 0x68, 16);
clks[IMX6UL_CLK_CAN2_IPG] = imx_clk_gate2("can2_ipg", "ipg", base + 0x68, 18);
clks[IMX6UL_CLK_CAN2_SERIAL] = imx_clk_gate2("can2_serial", "can_podf", base + 0x68, 20);
clks[IMX6UL_CLK_GPT2_BUS] = imx_clk_gate2("gpt_bus", "perclk", base + 0x68, 24);
@@ -331,7 +331,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
clks[IMX6UL_CLK_CSI] = imx_clk_gate2("csi", "csi_podf", base + 0x70, 2);
clks[IMX6UL_CLK_I2C1] = imx_clk_gate2("i2c1", "perclk", base + 0x70, 6);
clks[IMX6UL_CLK_I2C2] = imx_clk_gate2("i2c2", "perclk", base + 0x70, 8);
- clks[IMX6UL_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10);
+ clks[IMX6UL_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10);
clks[IMX6UL_CLK_OCOTP] = imx_clk_gate2("ocotp", "ipg", base + 0x70, 12);
clks[IMX6UL_CLK_IOMUXC] = imx_clk_gate2("iomuxc", "lcdif_podf", base + 0x70, 14);
clks[IMX6UL_CLK_LCDIF_APB] = imx_clk_gate2("lcdif_apb", "axi", base + 0x70, 28);
@@ -391,7 +391,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
clks[IMX6UL_CLK_UART8_IPG] = imx_clk_gate2("uart8_ipg", "ipg", base + 0x80, 14);
clks[IMX6UL_CLK_UART8_SERIAL] = imx_clk_gate2("uart8_serial", "uart_podf", base + 0x80, 14);
clks[IMX6UL_CLK_WDOG3] = imx_clk_gate2("wdog3", "ipg", base + 0x80, 20);
- clks[IMX6UL_CLK_I2C4] = imx_clk_gate2("i2c4", "perclk", base + 0x80, 24);
+ clks[IMX6UL_CLK_I2C4] = imx_clk_gate2("i2c4", "perclk", base + 0x80, 24);
clks[IMX6UL_CLK_PWM5] = imx_clk_gate2("pwm5", "perclk", base + 0x80, 26);
clks[IMX6UL_CLK_PWM6] = imx_clk_gate2("pwm6", "perclk", base + 0x80, 28);
clks[IMX6UL_CLK_PWM7] = imx_clk_gate2("Pwm7", "perclk", base + 0x80, 30);
diff --git a/include/dt-bindings/clock/imx6ul-clock.h b/include/dt-bindings/clock/imx6ul-clock.h
index c343894..08ce4a7 100644
--- a/include/dt-bindings/clock/imx6ul-clock.h
+++ b/include/dt-bindings/clock/imx6ul-clock.h
@@ -21,13 +21,13 @@
#define IMX6UL_PLL5_BYPASS_SRC 8
#define IMX6UL_PLL6_BYPASS_SRC 9
#define IMX6UL_PLL7_BYPASS_SRC 10
-#define IMX6UL_CLK_PLL1 11
-#define IMX6UL_CLK_PLL2 12
-#define IMX6UL_CLK_PLL3 13
-#define IMX6UL_CLK_PLL4 14
-#define IMX6UL_CLK_PLL5 15
-#define IMX6UL_CLK_PLL6 16
-#define IMX6UL_CLK_PLL7 17
+#define IMX6UL_CLK_PLL1 11
+#define IMX6UL_CLK_PLL2 12
+#define IMX6UL_CLK_PLL3 13
+#define IMX6UL_CLK_PLL4 14
+#define IMX6UL_CLK_PLL5 15
+#define IMX6UL_CLK_PLL6 16
+#define IMX6UL_CLK_PLL7 17
#define IMX6UL_PLL1_BYPASS 18
#define IMX6UL_PLL2_BYPASS 19
#define IMX6UL_PLL3_BYPASS 20
@@ -37,7 +37,7 @@
#define IMX6UL_PLL7_BYPASS 24
#define IMX6UL_CLK_PLL1_SYS 25
#define IMX6UL_CLK_PLL2_BUS 26
-#define IMX6UL_CLK_PLL3_USB_OTG 27
+#define IMX6UL_CLK_PLL3_USB_OTG 27
#define IMX6UL_CLK_PLL4_AUDIO 28
#define IMX6UL_CLK_PLL5_VIDEO 29
#define IMX6UL_CLK_PLL6_ENET 30
@@ -66,7 +66,7 @@
#define IMX6UL_CLK_PLL2_198M 53
#define IMX6UL_CLK_PLL3_80M 54
#define IMX6UL_CLK_PLL3_60M 55
-#define IMX6UL_CLK_STEP 56
+#define IMX6UL_CLK_STEP 56
#define IMX6UL_CLK_PLL1_SW 57
#define IMX6UL_CLK_AXI_ALT_SEL 58
#define IMX6UL_CLK_AXI_SEL 59
@@ -78,7 +78,7 @@
#define IMX6UL_CLK_USDHC2_SEL 65
#define IMX6UL_CLK_BCH_SEL 66
#define IMX6UL_CLK_GPMI_SEL 67
-#define IMX6UL_CLK_EIM_SLOW_SEL 68
+#define IMX6UL_CLK_EIM_SLOW_SEL 68
#define IMX6UL_CLK_SPDIF_SEL 69
#define IMX6UL_CLK_SAI1_SEL 70
#define IMX6UL_CLK_SAI2_SEL 71
@@ -105,9 +105,9 @@
#define IMX6UL_CLK_LDB_DI1_DIV_SEL 92
#define IMX6UL_CLK_ARM 93
#define IMX6UL_CLK_PERIPH_CLK2 94
-#define IMX6UL_CLK_PERIPH2_CLK2 95
+#define IMX6UL_CLK_PERIPH2_CLK2 95
#define IMX6UL_CLK_AHB 96
-#define IMX6UL_CLK_MMDC_PODF 97
+#define IMX6UL_CLK_MMDC_PODF 97
#define IMX6UL_CLK_AXI_PODF 98
#define IMX6UL_CLK_PERCLK 99
#define IMX6UL_CLK_IPG 100
@@ -133,16 +133,16 @@
#define IMX6UL_CLK_CAN_PODF 120
#define IMX6UL_CLK_ECSPI_PODF 121
#define IMX6UL_CLK_UART_PODF 122
-#define IMX6UL_CLK_ADC1 123
-#define IMX6UL_CLK_ADC2 124
+#define IMX6UL_CLK_ADC1 123
+#define IMX6UL_CLK_ADC2 124
#define IMX6UL_CLK_AIPSTZ1 125
#define IMX6UL_CLK_AIPSTZ2 126
#define IMX6UL_CLK_AIPSTZ3 127
#define IMX6UL_CLK_APBHDMA 128
#define IMX6UL_CLK_ASRC_IPG 129
#define IMX6UL_CLK_ASRC_MEM 130
-#define IMX6UL_CLK_GPMI_BCH_APB 131
-#define IMX6UL_CLK_GPMI_BCH 132
+#define IMX6UL_CLK_GPMI_BCH_APB 131
+#define IMX6UL_CLK_GPMI_BCH 132
#define IMX6UL_CLK_GPMI_IO 133
#define IMX6UL_CLK_GPMI_APB 134
#define IMX6UL_CLK_CAAM_MEM 135
@@ -154,7 +154,7 @@
#define IMX6UL_CLK_ECSPI3 141
#define IMX6UL_CLK_ECSPI4 142
#define IMX6UL_CLK_EIM 143
-#define IMX6UL_CLK_ENET 144
+#define IMX6UL_CLK_ENET 144
#define IMX6UL_CLK_ENET_AHB 145
#define IMX6UL_CLK_EPIT1 146
#define IMX6UL_CLK_EPIT2 147
@@ -166,63 +166,63 @@
#define IMX6UL_CLK_GPT1_SERIAL 153
#define IMX6UL_CLK_GPT2_BUS 154
#define IMX6UL_CLK_GPT2_SERIAL 155
-#define IMX6UL_CLK_I2C1 156
-#define IMX6UL_CLK_I2C2 157
-#define IMX6UL_CLK_I2C3 158
-#define IMX6UL_CLK_I2C4 159
-#define IMX6UL_CLK_IOMUXC 160
-#define IMX6UL_CLK_LCDIF_APB 161
-#define IMX6UL_CLK_LCDIF_PIX 162
-#define IMX6UL_CLK_MMDC_P0_FAST 163
-#define IMX6UL_CLK_MMDC_P0_IPG 164
-#define IMX6UL_CLK_OCOTP 165
-#define IMX6UL_CLK_OCRAM 166
-#define IMX6UL_CLK_PWM1 167
-#define IMX6UL_CLK_PWM2 168
-#define IMX6UL_CLK_PWM3 169
-#define IMX6UL_CLK_PWM4 170
-#define IMX6UL_CLK_PWM5 171
-#define IMX6UL_CLK_PWM6 172
-#define IMX6UL_CLK_PWM7 173
-#define IMX6UL_CLK_PWM8 174
-#define IMX6UL_CLK_PXP 175
-#define IMX6UL_CLK_QSPI 176
-#define IMX6UL_CLK_ROM 177
-#define IMX6UL_CLK_SAI1 178
-#define IMX6UL_CLK_SAI1_IPG 179
-#define IMX6UL_CLK_SAI2 180
-#define IMX6UL_CLK_SAI2_IPG 181
-#define IMX6UL_CLK_SAI3 182
-#define IMX6UL_CLK_SAI3_IPG 183
-#define IMX6UL_CLK_SDMA 184
-#define IMX6UL_CLK_SIM 185
-#define IMX6UL_CLK_SIM_S 186
-#define IMX6UL_CLK_SPBA 187
-#define IMX6UL_CLK_SPDIF 188
-#define IMX6UL_CLK_UART1_IPG 189
-#define IMX6UL_CLK_UART1_SERIAL 190
-#define IMX6UL_CLK_UART2_IPG 191
-#define IMX6UL_CLK_UART2_SERIAL 192
-#define IMX6UL_CLK_UART3_IPG 193
-#define IMX6UL_CLK_UART3_SERIAL 194
-#define IMX6UL_CLK_UART4_IPG 195
-#define IMX6UL_CLK_UART4_SERIAL 196
-#define IMX6UL_CLK_UART5_IPG 197
-#define IMX6UL_CLK_UART5_SERIAL 198
-#define IMX6UL_CLK_UART6_IPG 199
-#define IMX6UL_CLK_UART6_SERIAL 200
-#define IMX6UL_CLK_UART7_IPG 201
-#define IMX6UL_CLK_UART7_SERIAL 202
-#define IMX6UL_CLK_UART8_IPG 203
-#define IMX6UL_CLK_UART8_SERIAL 204
-#define IMX6UL_CLK_USBOH3 205
-#define IMX6UL_CLK_USDHC1 206
-#define IMX6UL_CLK_USDHC2 207
-#define IMX6UL_CLK_WDOG1 208
-#define IMX6UL_CLK_WDOG2 209
-#define IMX6UL_CLK_WDOG3 210
+#define IMX6UL_CLK_I2C1 156
+#define IMX6UL_CLK_I2C2 157
+#define IMX6UL_CLK_I2C3 158
+#define IMX6UL_CLK_I2C4 159
+#define IMX6UL_CLK_IOMUXC 160
+#define IMX6UL_CLK_LCDIF_APB 161
+#define IMX6UL_CLK_LCDIF_PIX 162
+#define IMX6UL_CLK_MMDC_P0_FAST 163
+#define IMX6UL_CLK_MMDC_P0_IPG 164
+#define IMX6UL_CLK_OCOTP 165
+#define IMX6UL_CLK_OCRAM 166
+#define IMX6UL_CLK_PWM1 167
+#define IMX6UL_CLK_PWM2 168
+#define IMX6UL_CLK_PWM3 169
+#define IMX6UL_CLK_PWM4 170
+#define IMX6UL_CLK_PWM5 171
+#define IMX6UL_CLK_PWM6 172
+#define IMX6UL_CLK_PWM7 173
+#define IMX6UL_CLK_PWM8 174
+#define IMX6UL_CLK_PXP 175
+#define IMX6UL_CLK_QSPI 176
+#define IMX6UL_CLK_ROM 177
+#define IMX6UL_CLK_SAI1 178
+#define IMX6UL_CLK_SAI1_IPG 179
+#define IMX6UL_CLK_SAI2 180
+#define IMX6UL_CLK_SAI2_IPG 181
+#define IMX6UL_CLK_SAI3 182
+#define IMX6UL_CLK_SAI3_IPG 183
+#define IMX6UL_CLK_SDMA 184
+#define IMX6UL_CLK_SIM 185
+#define IMX6UL_CLK_SIM_S 186
+#define IMX6UL_CLK_SPBA 187
+#define IMX6UL_CLK_SPDIF 188
+#define IMX6UL_CLK_UART1_IPG 189
+#define IMX6UL_CLK_UART1_SERIAL 190
+#define IMX6UL_CLK_UART2_IPG 191
+#define IMX6UL_CLK_UART2_SERIAL 192
+#define IMX6UL_CLK_UART3_IPG 193
+#define IMX6UL_CLK_UART3_SERIAL 194
+#define IMX6UL_CLK_UART4_IPG 195
+#define IMX6UL_CLK_UART4_SERIAL 196
+#define IMX6UL_CLK_UART5_IPG 197
+#define IMX6UL_CLK_UART5_SERIAL 198
+#define IMX6UL_CLK_UART6_IPG 199
+#define IMX6UL_CLK_UART6_SERIAL 200
+#define IMX6UL_CLK_UART7_IPG 201
+#define IMX6UL_CLK_UART7_SERIAL 202
+#define IMX6UL_CLK_UART8_IPG 203
+#define IMX6UL_CLK_UART8_SERIAL 204
+#define IMX6UL_CLK_USBOH3 205
+#define IMX6UL_CLK_USDHC1 206
+#define IMX6UL_CLK_USDHC2 207
+#define IMX6UL_CLK_WDOG1 208
+#define IMX6UL_CLK_WDOG2 209
+#define IMX6UL_CLK_WDOG3 210
#define IMX6UL_CLK_LDB_DI0 211
-#define IMX6UL_CLK_AXI 212
+#define IMX6UL_CLK_AXI 212
#define IMX6UL_CLK_SPDIF_GCLK 213
#define IMX6UL_CLK_GPT_3M 214
#define IMX6UL_CLK_SIM2 215
--
2.1.4
next prev parent reply other threads:[~2016-01-20 10:13 UTC|newest]
Thread overview: 104+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-12 17:21 [PATCH 0/14] ARM: dts: imx6ul: add more functionality to i.MX6UL Lothar Waßmann
2016-01-12 17:21 ` Lothar Waßmann
2016-01-12 17:21 ` [PATCH 01/14] ARM: dts: imx6ul: whitespace cleanup; no functional change Lothar Waßmann
2016-01-12 17:21 ` Lothar Waßmann
2016-01-12 17:21 ` [PATCH 02/14] ARM: dts: imx6ul: move tsc node to appropriate place in the DTB Lothar Waßmann
2016-01-12 17:21 ` Lothar Waßmann
2016-01-12 17:21 ` [PATCH 03/14] ARM: dts: imx6ul: move dt-bindings/input/input.h include to dtsi file Lothar Waßmann
2016-01-12 17:21 ` Lothar Waßmann
2016-01-12 17:21 ` [PATCH 04/14] ARM: dts: imx6ul: specify proper clocks for GPT node Lothar Waßmann
2016-01-12 17:21 ` Lothar Waßmann
2016-01-12 17:21 ` Lothar Waßmann
2016-01-12 17:21 ` [PATCH 05/14] ARM: dts: imx6ul: specify proper clocks for the PWM nodes Lothar Waßmann
2016-01-12 17:21 ` Lothar Waßmann
2016-01-12 17:21 ` Lothar Waßmann
2016-01-12 17:21 ` [PATCH 06/14] ARM: dts: imx6ul: disable PWMs by default Lothar Waßmann
2016-01-12 17:21 ` Lothar Waßmann
2016-01-12 17:21 ` Lothar Waßmann
2016-01-12 17:21 ` [PATCH 07/14] ARM: dts: imx6ul: add pwm[1-4] nodes Lothar Waßmann
2016-01-12 17:21 ` Lothar Waßmann
2016-01-12 17:21 ` Lothar Waßmann
2016-01-12 17:21 ` [PATCH 08/14] ARM: dts: imx6ul: add kpp support Lothar Waßmann
2016-01-12 17:21 ` Lothar Waßmann
2016-01-12 17:21 ` Lothar Waßmann
2016-01-12 17:21 ` [PATCH 09/14] ARM: dts: imx6ul: add sdma support Lothar Waßmann
2016-01-12 17:21 ` Lothar Waßmann
2016-01-12 17:21 ` Lothar Waßmann
2016-01-12 17:21 ` [PATCH 10/14] ARM: dts: imx6ul: add flexcan support Lothar Waßmann
2016-01-12 17:21 ` Lothar Waßmann
2016-01-12 17:21 ` [PATCH 11/14] ARM: dts: imx6ul: add sai support Lothar Waßmann
2016-01-12 17:21 ` Lothar Waßmann
2016-01-12 17:21 ` [PATCH 12/14] ARM: dts: imx6ul: add lcdif support Lothar Waßmann
2016-01-12 17:21 ` Lothar Waßmann
2016-01-12 17:21 ` [PATCH 13/14] ARM: dts: imx6ul: add gpmi support Lothar Waßmann
2016-01-12 17:21 ` Lothar Waßmann
2016-01-12 17:21 ` Lothar Waßmann
2016-01-12 17:21 ` [PATCH 14/14] ARM: dts: imx6: make audmux optional for i.MX6UL sound driver Lothar Waßmann
2016-01-12 17:21 ` Lothar Waßmann
2016-01-15 2:38 ` Rob Herring
2016-01-15 2:38 ` Rob Herring
2016-01-15 6:34 ` Lothar Waßmann
2016-01-15 6:34 ` Lothar Waßmann
2016-01-15 6:34 ` Lothar Waßmann
2016-01-13 3:16 ` [PATCH 08/14] ARM: dts: imx6ul: add kpp support kbuild test robot
2016-01-13 3:16 ` kbuild test robot
2016-01-13 3:16 ` kbuild test robot
2016-01-13 9:40 ` Lucas Stach
2016-01-13 9:40 ` Lucas Stach
2016-01-20 10:08 ` ARM: dts: imx6ul: add more functionality to i.MX6UL Lothar Waßmann
2016-01-20 10:08 ` Lothar Waßmann
2016-01-20 10:08 ` [PATCHv2 01/16] ARM: dts: imx6ul: whitespace cleanup; no functional change Lothar Waßmann
2016-01-20 10:08 ` [PATCHv2 02/16] ARM: dts: imx6ul: move tsc node to appropriate place in the DTB Lothar Waßmann
2016-01-20 10:08 ` Lothar Waßmann
2016-01-20 10:08 ` [PATCHv2 03/16] ARM: dts: imx6ul: move dt-bindings/input/input.h include to dtsi file Lothar Waßmann
2016-01-20 10:08 ` Lothar Waßmann
2016-01-20 10:08 ` [PATCHv2 04/16] ARM: dts: imx6ul: specify proper clocks for GPT node Lothar Waßmann
2016-01-20 10:08 ` Lothar Waßmann
2016-01-20 10:08 ` [PATCHv2 05/16] ARM: dts: imx6ul: specify proper clocks for the PWM nodes Lothar Waßmann
2016-01-20 10:08 ` Lothar Waßmann
2016-01-20 10:08 ` [PATCHv2 06/16] ARM: dts: imx6ul: disable PWMs by default Lothar Waßmann
2016-01-20 10:08 ` Lothar Waßmann
2016-01-20 10:08 ` Lothar Waßmann
2016-01-20 10:09 ` [PATCHv2 07/16] ARM: dts: imx6ul: add pwm[1-4] nodes Lothar Waßmann
2016-01-20 10:09 ` Lothar Waßmann
2016-01-20 10:09 ` Lothar Waßmann
2016-01-20 10:09 ` [PATCHv2 08/16] ARM: dts: imx6ul: add sdma support Lothar Waßmann
2016-01-20 10:09 ` Lothar Waßmann
2016-01-20 10:09 ` [PATCHv2 09/16] ARM: dts: imx6ul: add flexcan support Lothar Waßmann
2016-01-20 10:09 ` Lothar Waßmann
2016-01-20 10:09 ` Lothar Waßmann
2016-01-20 10:09 ` [PATCHv2 10/16] ARM: dts: imx6ul: add sai support Lothar Waßmann
2016-01-20 10:09 ` Lothar Waßmann
2016-01-20 10:09 ` [PATCHv2 11/16] ARM: dts: imx6ul: add lcdif support Lothar Waßmann
2016-01-20 10:09 ` Lothar Waßmann
2016-01-20 10:09 ` Lothar Waßmann
2016-01-20 10:09 ` [PATCHv2 12/16] ARM: dts: imx6ul: add gpmi support Lothar Waßmann
2016-01-20 10:09 ` Lothar Waßmann
2016-01-20 10:09 ` Lothar Waßmann [this message]
2016-01-20 10:09 ` [PATCHv2 13/16] clk: imx: whitespace cleanup; no functional change Lothar Waßmann
2016-02-25 22:27 ` Stephen Boyd
2016-02-25 22:27 ` Stephen Boyd
2016-01-20 10:09 ` [PATCHv2 14/16] clk: imx: add kpp clock for i.MX6UL Lothar Waßmann
2016-01-20 10:09 ` Lothar Waßmann
2016-02-25 22:27 ` Stephen Boyd
2016-02-25 22:27 ` Stephen Boyd
2016-01-20 10:09 ` [PATCHv2 15/16] ARM: dts: imx6ul: add kpp support Lothar Waßmann
2016-01-20 10:09 ` Lothar Waßmann
2016-01-20 10:09 ` Lothar Waßmann
2016-01-20 10:09 ` [PATCHv2 16/16] ARM: dts: imx6ul: add support for Ka-Ro electronics TXUL modules Lothar Waßmann
2016-01-20 10:09 ` Lothar Waßmann
2016-02-28 6:43 ` Shawn Guo
2016-02-28 6:43 ` Shawn Guo
2016-02-29 11:21 ` Lothar Waßmann
2016-02-29 11:21 ` Lothar Waßmann
2016-02-29 11:21 ` Lothar Waßmann
2016-02-28 6:49 ` ARM: dts: imx6ul: add more functionality to i.MX6UL Shawn Guo
2016-02-28 6:49 ` Shawn Guo
2016-03-04 12:37 ` Lothar Waßmann
2016-03-04 12:37 ` Lothar Waßmann
2016-03-04 12:37 ` [PATCHv3 1/2] ARM: dts: imx6ul: add support for Ka-Ro electronics TXUL modules Lothar Waßmann
2016-03-04 12:37 ` Lothar Waßmann
2016-03-04 12:37 ` [PATCHv3 2/2] ARM: dts: imx6ul: add support for Ka-Ro electronics TXUL mainboard Lothar Waßmann
2016-03-04 12:37 ` Lothar Waßmann
2016-03-30 11:43 ` ARM: dts: imx6ul: add more functionality to i.MX6UL Shawn Guo
2016-03-30 11:43 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453284549-16363-14-git-send-email-LW@KARO-electronics.de \
--to=lw@karo-electronics.de \
--cc=B38611@freescale.com \
--cc=Frank.Li@freescale.com \
--cc=b20788@freescale.com \
--cc=b51503@freescale.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.