* [U-Boot] [PATCH 0/7] Add/enable lpuart support on Vybrid based boards
@ 2016-01-22 7:49 Bhuvanchandra DV
2016-01-22 7:49 ` [U-Boot] [PATCH 1/7] arm: vf: Enable lpuart support Bhuvanchandra DV
` (6 more replies)
0 siblings, 7 replies; 19+ messages in thread
From: Bhuvanchandra DV @ 2016-01-22 7:49 UTC (permalink / raw)
To: u-boot
- Add serial support to Vybrid device tree.
- Enable lpuart support on Colibri VF50/VF61.
- Add device tree files to VF610-twr board and enable lpuart support.
- Add device tree files to pcm-052 board and enable lpuart support.
- Droped legacy code in lpuart serial driver.
- Droped non DT defconfigs for Vybrid based boards.
- Compile checked for vf610twr and pcm052 since I don't have access
to such hardware at my end. Reviewers and testers welcome!
Bhuvanchandra DV (7):
arm: vf: Enable lpuart support
arm: colibri-vf: Enable serial support
arm: vf610-twr: Add device tree files
arm: pcm052: Add device tree files
dm: lpuart: Drop the legacy code
arm: vybrid: Drop enabling serial in legacy mode
arm: vf: Remove the legacy defconfigs
arch/arm/dts/Makefile | 4 +-
arch/arm/dts/pcm052.dts | 27 +++++++++++
arch/arm/dts/vf-colibri.dtsi | 10 ++++
arch/arm/dts/vf.dtsi | 14 ++++++
arch/arm/dts/vf610-twr.dts | 27 +++++++++++
configs/colibri_vf_defconfig | 11 -----
configs/colibri_vf_dtb_defconfig | 1 +
configs/pcm052_defconfig | 6 ---
configs/pcm052_dtb_defconfig | 10 ++++
configs/vf610twr_defconfig | 9 ----
configs/vf610twr_dtb_defconfig | 13 +++++
drivers/serial/serial_lpuart.c | 101 +--------------------------------------
include/configs/colibri_vf.h | 3 --
include/configs/pcm052.h | 3 --
include/configs/vf610twr.h | 3 --
15 files changed, 107 insertions(+), 135 deletions(-)
create mode 100644 arch/arm/dts/pcm052.dts
create mode 100644 arch/arm/dts/vf610-twr.dts
delete mode 100644 configs/colibri_vf_defconfig
delete mode 100644 configs/pcm052_defconfig
create mode 100644 configs/pcm052_dtb_defconfig
delete mode 100644 configs/vf610twr_defconfig
create mode 100644 configs/vf610twr_dtb_defconfig
--
2.7.0
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [PATCH 1/7] arm: vf: Enable lpuart support
2016-01-22 7:49 [U-Boot] [PATCH 0/7] Add/enable lpuart support on Vybrid based boards Bhuvanchandra DV
@ 2016-01-22 7:49 ` Bhuvanchandra DV
2016-01-22 9:52 ` Bin Meng
2016-01-22 7:49 ` [U-Boot] [PATCH 2/7] arm: colibri-vf: Enable serial support Bhuvanchandra DV
` (5 subsequent siblings)
6 siblings, 1 reply; 19+ messages in thread
From: Bhuvanchandra DV @ 2016-01-22 7:49 UTC (permalink / raw)
To: u-boot
Add device tree node for lpuart on Vybrid platform
---
arch/arm/dts/vf.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/dts/vf.dtsi b/arch/arm/dts/vf.dtsi
index 78706e1..5f5bd4c 100644
--- a/arch/arm/dts/vf.dtsi
+++ b/arch/arm/dts/vf.dtsi
@@ -17,6 +17,8 @@
gpio2 = &gpio2;
gpio3 = &gpio3;
gpio4 = &gpio4;
+ serial0 = &uart0;
+ serial1 = &uart1;
spi0 = &dspi0;
spi1 = &dspi1;
};
@@ -33,6 +35,18 @@
#size-cells = <1>;
ranges;
+ uart0: serial at 40027000 {
+ compatible = "fsl,vf610-lpuart";
+ reg = <0x40027000 0x1000>;
+ status = "disabled";
+ };
+
+ uart1: serial at 40028000 {
+ compatible = "fsl,vf610-lpuart";
+ reg = <0x40028000 0x1000>;
+ status = "disabled";
+ };
+
dspi0: dspi0 at 4002c000 {
#address-cells = <1>;
#size-cells = <0>;
--
2.7.0
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [U-Boot] [PATCH 2/7] arm: colibri-vf: Enable serial support
2016-01-22 7:49 [U-Boot] [PATCH 0/7] Add/enable lpuart support on Vybrid based boards Bhuvanchandra DV
2016-01-22 7:49 ` [U-Boot] [PATCH 1/7] arm: vf: Enable lpuart support Bhuvanchandra DV
@ 2016-01-22 7:49 ` Bhuvanchandra DV
2016-01-22 9:52 ` Bin Meng
2016-01-22 7:49 ` [U-Boot] [PATCH 3/7] arm: vf610-twr: Add device tree files Bhuvanchandra DV
` (4 subsequent siblings)
6 siblings, 1 reply; 19+ messages in thread
From: Bhuvanchandra DV @ 2016-01-22 7:49 UTC (permalink / raw)
To: u-boot
---
arch/arm/dts/vf-colibri.dtsi | 10 ++++++++++
configs/colibri_vf_dtb_defconfig | 1 +
2 files changed, 11 insertions(+)
diff --git a/arch/arm/dts/vf-colibri.dtsi b/arch/arm/dts/vf-colibri.dtsi
index 7a8e9bee..0718486 100644
--- a/arch/arm/dts/vf-colibri.dtsi
+++ b/arch/arm/dts/vf-colibri.dtsi
@@ -10,6 +10,12 @@
*/
#include "vf.dtsi"
+/ {
+ chosen {
+ stdout-path = &uart0;
+ };
+};
+
&dspi1 {
status = "okay";
bus-num = <1>;
@@ -19,3 +25,7 @@
spi-max-frequency = <50000000>;
};
};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/configs/colibri_vf_dtb_defconfig b/configs/colibri_vf_dtb_defconfig
index b1a843a..b204fb8 100644
--- a/configs/colibri_vf_dtb_defconfig
+++ b/configs/colibri_vf_dtb_defconfig
@@ -11,4 +11,5 @@ CONFIG_OF_CONTROL=y
CONFIG_DM=y
CONFIG_NAND_VF610_NFC=y
CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y
+CONFIG_DM_SERIAL=y
CONFIG_FSL_LPUART=y
--
2.7.0
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [U-Boot] [PATCH 3/7] arm: vf610-twr: Add device tree files
2016-01-22 7:49 [U-Boot] [PATCH 0/7] Add/enable lpuart support on Vybrid based boards Bhuvanchandra DV
2016-01-22 7:49 ` [U-Boot] [PATCH 1/7] arm: vf: Enable lpuart support Bhuvanchandra DV
2016-01-22 7:49 ` [U-Boot] [PATCH 2/7] arm: colibri-vf: Enable serial support Bhuvanchandra DV
@ 2016-01-22 7:49 ` Bhuvanchandra DV
2016-01-22 9:52 ` Bin Meng
2016-01-22 7:49 ` [U-Boot] [PATCH 4/7] arm: pcm052: " Bhuvanchandra DV
` (3 subsequent siblings)
6 siblings, 1 reply; 19+ messages in thread
From: Bhuvanchandra DV @ 2016-01-22 7:49 UTC (permalink / raw)
To: u-boot
Add device tree files and enable serial support
---
arch/arm/dts/Makefile | 3 ++-
arch/arm/dts/vf610-twr.dts | 27 +++++++++++++++++++++++++++
configs/vf610twr_dtb_defconfig | 13 +++++++++++++
3 files changed, 42 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/vf610-twr.dts
create mode 100644 configs/vf610twr_dtb_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index f66ff41..c6fb50c 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -190,7 +190,8 @@ dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-cubieboard4.dtb
dtb-$(CONFIG_VF610) += vf500-colibri.dtb \
- vf610-colibri.dtb
+ vf610-colibri.dtb \
+ vf610-twr.dtb
dtb-$(CONFIG_SOC_KEYSTONE) += k2hk-evm.dtb \
k2l-evm.dtb \
diff --git a/arch/arm/dts/vf610-twr.dts b/arch/arm/dts/vf610-twr.dts
new file mode 100644
index 0000000..8f86a80
--- /dev/null
+++ b/arch/arm/dts/vf610-twr.dts
@@ -0,0 +1,27 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * SPDX-License-Identifier: GPL-2.0+ or X11
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf.dtsi"
+
+/ {
+ model = "VF610 Tower Board";
+ compatible = "fsl,vf610-twr", "fsl,vf610";
+
+ choosen {
+ stdout-path = &uart1;
+ };
+
+};
+
+&uart1 {
+ status = "okay";
+};
diff --git a/configs/vf610twr_dtb_defconfig b/configs/vf610twr_dtb_defconfig
new file mode 100644
index 0000000..24a7223
--- /dev/null
+++ b/configs/vf610twr_dtb_defconfig
@@ -0,0 +1,13 @@
+CONFIG_ARM=y
+CONFIG_TARGET_VF610TWR=y
+CONFIG_DEFAULT_DEVICE_TREE="vf610-twr"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_IS_IN_MMC"
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_NAND_VF610_NFC=y
+CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
+CONFIG_SPI_FLASH=y
+CONFIG_DM=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM_SERIAL=y
+CONFIG_FSL_LPUART=y
--
2.7.0
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [U-Boot] [PATCH 4/7] arm: pcm052: Add device tree files
2016-01-22 7:49 [U-Boot] [PATCH 0/7] Add/enable lpuart support on Vybrid based boards Bhuvanchandra DV
` (2 preceding siblings ...)
2016-01-22 7:49 ` [U-Boot] [PATCH 3/7] arm: vf610-twr: Add device tree files Bhuvanchandra DV
@ 2016-01-22 7:49 ` Bhuvanchandra DV
2016-01-22 9:53 ` Bin Meng
2016-01-22 7:49 ` [U-Boot] [PATCH 5/7] dm: lpuart: Drop the legacy code Bhuvanchandra DV
` (2 subsequent siblings)
6 siblings, 1 reply; 19+ messages in thread
From: Bhuvanchandra DV @ 2016-01-22 7:49 UTC (permalink / raw)
To: u-boot
Add device tree files and enable serial support
---
arch/arm/dts/Makefile | 3 ++-
arch/arm/dts/pcm052.dts | 27 +++++++++++++++++++++++++++
configs/pcm052_dtb_defconfig | 10 ++++++++++
3 files changed, 39 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/pcm052.dts
create mode 100644 configs/pcm052_dtb_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index c6fb50c..b3bde5a 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -191,7 +191,8 @@ dtb-$(CONFIG_MACH_SUN9I) += \
dtb-$(CONFIG_VF610) += vf500-colibri.dtb \
vf610-colibri.dtb \
- vf610-twr.dtb
+ vf610-twr.dtb \
+ pcm052.dtb
dtb-$(CONFIG_SOC_KEYSTONE) += k2hk-evm.dtb \
k2l-evm.dtb \
diff --git a/arch/arm/dts/pcm052.dts b/arch/arm/dts/pcm052.dts
new file mode 100644
index 0000000..068ba2f
--- /dev/null
+++ b/arch/arm/dts/pcm052.dts
@@ -0,0 +1,27 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * SPDX-License-Identifier: GPL-2.0+ or X11
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf.dtsi"
+
+/ {
+ model = "Phytec phyCORE-Vybrid";
+ compatible = "phytec,pcm052", "fsl,vf610";
+
+ choosen {
+ stdout-path = &uart1;
+ };
+
+};
+
+&uart1 {
+ status = "okay";
+};
diff --git a/configs/pcm052_dtb_defconfig b/configs/pcm052_dtb_defconfig
new file mode 100644
index 0000000..877d973
--- /dev/null
+++ b/configs/pcm052_dtb_defconfig
@@ -0,0 +1,10 @@
+CONFIG_ARM=y
+CONFIG_TARGET_PCM052=y
+CONFIG_DEFAULT_DEVICE_TREE="pcm-052"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/phytec/pcm052/imximage.cfg,ENV_IS_IN_NAND"
+CONFIG_NAND_VF610_NFC=y
+CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
+CONFIG_DM=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM_SERIAL=y
+CONFIG_FSL_LPUART=y
--
2.7.0
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [U-Boot] [PATCH 5/7] dm: lpuart: Drop the legacy code
2016-01-22 7:49 [U-Boot] [PATCH 0/7] Add/enable lpuart support on Vybrid based boards Bhuvanchandra DV
` (3 preceding siblings ...)
2016-01-22 7:49 ` [U-Boot] [PATCH 4/7] arm: pcm052: " Bhuvanchandra DV
@ 2016-01-22 7:49 ` Bhuvanchandra DV
2016-01-22 9:54 ` Bin Meng
2016-01-22 7:49 ` [U-Boot] [PATCH 6/7] arm: vybrid: Drop enabling serial in legacy mode Bhuvanchandra DV
2016-01-22 7:49 ` [U-Boot] [PATCH 7/7] arm: vf: Remove the legacy defconfigs Bhuvanchandra DV
6 siblings, 1 reply; 19+ messages in thread
From: Bhuvanchandra DV @ 2016-01-22 7:49 UTC (permalink / raw)
To: u-boot
All boards using this driver are with device tree support,
hence drop the legacy code in driver to have a pure DT solution.
---
drivers/serial/serial_lpuart.c | 101 +----------------------------------------
1 file changed, 2 insertions(+), 99 deletions(-)
diff --git a/drivers/serial/serial_lpuart.c b/drivers/serial/serial_lpuart.c
index 3f9c4d1..fc3321f 100644
--- a/drivers/serial/serial_lpuart.c
+++ b/drivers/serial/serial_lpuart.c
@@ -48,8 +48,6 @@
DECLARE_GLOBAL_DATA_PTR;
-struct lpuart_fsl *base = (struct lpuart_fsl *)LPUART_BASE;
-
struct lpuart_serial_platdata {
struct lpuart_fsl *reg;
};
@@ -127,43 +125,6 @@ static int _lpuart_serial_init(struct lpuart_fsl *base)
return 0;
}
-#ifndef CONFIG_DM_SERIAL
-static void lpuart_serial_setbrg(void)
-{
- _lpuart_serial_setbrg(base, gd->baudrate);
-}
-
-static int lpuart_serial_getc(void)
-{
- return _lpuart_serial_getc(base);
-}
-
-static void lpuart_serial_putc(const char c)
-{
- _lpuart_serial_putc(base, c);
-}
-
-static int lpuart_serial_tstc(void)
-{
- return _lpuart_serial_tstc(base);
-}
-
-static int lpuart_serial_init(void)
-{
- return _lpuart_serial_init(base);
-}
-
-static struct serial_device lpuart_serial_drv = {
- .name = "lpuart_serial",
- .start = lpuart_serial_init,
- .stop = NULL,
- .setbrg = lpuart_serial_setbrg,
- .putc = lpuart_serial_putc,
- .puts = default_serial_puts,
- .getc = lpuart_serial_getc,
- .tstc = lpuart_serial_tstc,
-};
-#else /* CONFIG_DM_SERIAL */
static int lpuart_serial_setbrg(struct udevice *dev, int baudrate)
{
struct lpuart_serial_platdata *plat = dev->platdata;
@@ -210,8 +171,8 @@ static int lpuart_serial_probe(struct udevice *dev)
return _lpuart_serial_init(reg);
}
-#endif /* CONFIG_DM_SERIAL */
#else
+
static void _lpuart32_serial_setbrg(struct lpuart_fsl *base, int baudrate)
{
u32 clk = CONFIG_SYS_CLK_FREQ;
@@ -281,43 +242,6 @@ static int _lpuart32_serial_init(struct lpuart_fsl *base)
return 0;
}
-#ifndef CONFIG_DM_SERIAL
-static void lpuart32_serial_setbrg(void)
-{
- _lpuart32_serial_setbrg(base, gd->baudrate);
-}
-
-static int lpuart32_serial_getc(void)
-{
- return _lpuart32_serial_getc(base);
-}
-
-static void lpuart32_serial_putc(const char c)
-{
- _lpuart32_serial_putc(base, c);
-}
-
-static int lpuart32_serial_tstc(void)
-{
- return _lpuart32_serial_tstc(base);
-}
-
-static int lpuart32_serial_init(void)
-{
- return _lpuart32_serial_init(base);
-}
-
-static struct serial_device lpuart32_serial_drv = {
- .name = "lpuart32_serial",
- .start = lpuart32_serial_init,
- .stop = NULL,
- .setbrg = lpuart32_serial_setbrg,
- .putc = lpuart32_serial_putc,
- .puts = default_serial_puts,
- .getc = lpuart32_serial_getc,
- .tstc = lpuart32_serial_tstc,
-};
-#else /* CONFIG_DM_SERIAL */
static int lpuart32_serial_setbrg(struct udevice *dev, int baudrate)
{
struct lpuart_serial_platdata *plat = dev->platdata;
@@ -364,28 +288,8 @@ static int lpuart32_serial_probe(struct udevice *dev)
return _lpuart32_serial_init(reg);
}
-#endif /* CONFIG_DM_SERIAL */
-#endif
-
-#ifndef CONFIG_DM_SERIAL
-void lpuart_serial_initialize(void)
-{
-#ifdef CONFIG_LPUART_32B_REG
- serial_register(&lpuart32_serial_drv);
-#else
- serial_register(&lpuart_serial_drv);
-#endif
-}
+#endif /* CONFIG_LPUART_32B_REG */
-__weak struct serial_device *default_serial_console(void)
-{
-#ifdef CONFIG_LPUART_32B_REG
- return &lpuart32_serial_drv;
-#else
- return &lpuart_serial_drv;
-#endif
-}
-#else /* CONFIG_DM_SERIAL */
static int lpuart_serial_ofdata_to_platdata(struct udevice *dev)
{
struct lpuart_serial_platdata *plat = dev->platdata;
@@ -447,4 +351,3 @@ U_BOOT_DRIVER(serial_lpuart32) = {
.flags = DM_FLAG_PRE_RELOC,
};
#endif /* CONFIG_LPUART_32B_REG */
-#endif /* CONFIG_DM_SERIAL */
--
2.7.0
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [U-Boot] [PATCH 6/7] arm: vybrid: Drop enabling serial in legacy mode
2016-01-22 7:49 [U-Boot] [PATCH 0/7] Add/enable lpuart support on Vybrid based boards Bhuvanchandra DV
` (4 preceding siblings ...)
2016-01-22 7:49 ` [U-Boot] [PATCH 5/7] dm: lpuart: Drop the legacy code Bhuvanchandra DV
@ 2016-01-22 7:49 ` Bhuvanchandra DV
2016-01-22 9:54 ` Bin Meng
2016-01-22 7:49 ` [U-Boot] [PATCH 7/7] arm: vf: Remove the legacy defconfigs Bhuvanchandra DV
6 siblings, 1 reply; 19+ messages in thread
From: Bhuvanchandra DV @ 2016-01-22 7:49 UTC (permalink / raw)
To: u-boot
Remove the legacy way of handling serial ports on Vybrid based
boards since lpuart driver now only supports DT mode.
---
include/configs/colibri_vf.h | 3 ---
include/configs/pcm052.h | 3 ---
include/configs/vf610twr.h | 3 ---
3 files changed, 9 deletions(-)
diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 5aed3a5..e17f76a 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -36,13 +36,10 @@
#define CONFIG_BOARD_EARLY_INIT_F
-#define LPUART_BASE UART0_BASE
-
/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_VERSION_VARIABLE
-#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
#define CONFIG_CMD_ASKENV
diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h
index 891bdb0..f3353f2 100644
--- a/include/configs/pcm052.h
+++ b/include/configs/pcm052.h
@@ -27,11 +27,8 @@
#define CONFIG_BOARD_EARLY_INIT_F
-#define LPUART_BASE UART1_BASE
-
/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_SYS_UART_PORT (1)
#define CONFIG_BAUDRATE 115200
#undef CONFIG_CMD_IMLS
diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
index dcfafaf..84ad2c3 100644
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@@ -34,11 +34,8 @@
#define CONFIG_BOARD_EARLY_INIT_F
-#define LPUART_BASE UART1_BASE
-
/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_SYS_UART_PORT (1)
#define CONFIG_BAUDRATE 115200
/* NAND support */
--
2.7.0
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [U-Boot] [PATCH 7/7] arm: vf: Remove the legacy defconfigs
2016-01-22 7:49 [U-Boot] [PATCH 0/7] Add/enable lpuart support on Vybrid based boards Bhuvanchandra DV
` (5 preceding siblings ...)
2016-01-22 7:49 ` [U-Boot] [PATCH 6/7] arm: vybrid: Drop enabling serial in legacy mode Bhuvanchandra DV
@ 2016-01-22 7:49 ` Bhuvanchandra DV
2016-01-22 9:55 ` Bin Meng
6 siblings, 1 reply; 19+ messages in thread
From: Bhuvanchandra DV @ 2016-01-22 7:49 UTC (permalink / raw)
To: u-boot
Let's go with pure DT solution!
Since in long run U-Boot anyway is evolving to pure DT solution.
---
configs/colibri_vf_defconfig | 11 -----------
configs/pcm052_defconfig | 6 ------
configs/vf610twr_defconfig | 9 ---------
3 files changed, 26 deletions(-)
delete mode 100644 configs/colibri_vf_defconfig
delete mode 100644 configs/pcm052_defconfig
delete mode 100644 configs/vf610twr_defconfig
diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig
deleted file mode 100644
index 45917c8..0000000
--- a/configs/colibri_vf_defconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_COLIBRI_VF=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_vf/imximage.cfg,ENV_IS_IN_NAND,IMX_NAND"
-CONFIG_SYS_PROMPT="Colibri VFxx # "
-# CONFIG_CMD_IMLS is not set
-CONFIG_CMD_GPIO=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_DM=y
-CONFIG_NAND_VF610_NFC=y
-CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y
-CONFIG_FSL_LPUART=y
diff --git a/configs/pcm052_defconfig b/configs/pcm052_defconfig
deleted file mode 100644
index 26ab733..0000000
--- a/configs/pcm052_defconfig
+++ /dev/null
@@ -1,6 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_PCM052=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/phytec/pcm052/imximage.cfg,ENV_IS_IN_NAND"
-CONFIG_NAND_VF610_NFC=y
-CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
-CONFIG_FSL_LPUART=y
diff --git a/configs/vf610twr_defconfig b/configs/vf610twr_defconfig
deleted file mode 100644
index d51c93b..0000000
--- a/configs/vf610twr_defconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_VF610TWR=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_IS_IN_MMC"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_NAND_VF610_NFC=y
-CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
-CONFIG_SPI_FLASH=y
-CONFIG_FSL_LPUART=y
--
2.7.0
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [U-Boot] [PATCH 1/7] arm: vf: Enable lpuart support
2016-01-22 7:49 ` [U-Boot] [PATCH 1/7] arm: vf: Enable lpuart support Bhuvanchandra DV
@ 2016-01-22 9:52 ` Bin Meng
0 siblings, 0 replies; 19+ messages in thread
From: Bin Meng @ 2016-01-22 9:52 UTC (permalink / raw)
To: u-boot
On Fri, Jan 22, 2016 at 3:49 PM, Bhuvanchandra DV
<bhuvanchandra.dv@toradex.com> wrote:
> Add device tree node for lpuart on Vybrid platform
> ---
> arch/arm/dts/vf.dtsi | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [PATCH 2/7] arm: colibri-vf: Enable serial support
2016-01-22 7:49 ` [U-Boot] [PATCH 2/7] arm: colibri-vf: Enable serial support Bhuvanchandra DV
@ 2016-01-22 9:52 ` Bin Meng
2016-01-22 12:21 ` Bhuvanchandra DV
0 siblings, 1 reply; 19+ messages in thread
From: Bin Meng @ 2016-01-22 9:52 UTC (permalink / raw)
To: u-boot
Hi Bhuvanchandra,
On Fri, Jan 22, 2016 at 3:49 PM, Bhuvanchandra DV
<bhuvanchandra.dv@toradex.com> wrote:
> ---
Please always include a commit message.
> arch/arm/dts/vf-colibri.dtsi | 10 ++++++++++
> configs/colibri_vf_dtb_defconfig | 1 +
> 2 files changed, 11 insertions(+)
>
> diff --git a/arch/arm/dts/vf-colibri.dtsi b/arch/arm/dts/vf-colibri.dtsi
> index 7a8e9bee..0718486 100644
> --- a/arch/arm/dts/vf-colibri.dtsi
> +++ b/arch/arm/dts/vf-colibri.dtsi
> @@ -10,6 +10,12 @@
> */
> #include "vf.dtsi"
>
> +/ {
> + chosen {
> + stdout-path = &uart0;
> + };
> +};
> +
> &dspi1 {
> status = "okay";
> bus-num = <1>;
> @@ -19,3 +25,7 @@
> spi-max-frequency = <50000000>;
> };
> };
> +
> +&uart0 {
> + status = "okay";
> +};
> diff --git a/configs/colibri_vf_dtb_defconfig b/configs/colibri_vf_dtb_defconfig
Why adding _dtb here? Can we update the existing defconfig files?
> index b1a843a..b204fb8 100644
> --- a/configs/colibri_vf_dtb_defconfig
> +++ b/configs/colibri_vf_dtb_defconfig
> @@ -11,4 +11,5 @@ CONFIG_OF_CONTROL=y
> CONFIG_DM=y
> CONFIG_NAND_VF610_NFC=y
> CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y
> +CONFIG_DM_SERIAL=y
> CONFIG_FSL_LPUART=y
> --
Please try to insert new Kconfig options in a correct order. You can
get it via 'make savedefconfig'.
Regards,
Bin
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [PATCH 3/7] arm: vf610-twr: Add device tree files
2016-01-22 7:49 ` [U-Boot] [PATCH 3/7] arm: vf610-twr: Add device tree files Bhuvanchandra DV
@ 2016-01-22 9:52 ` Bin Meng
2016-01-22 12:21 ` Bhuvanchandra DV
0 siblings, 1 reply; 19+ messages in thread
From: Bin Meng @ 2016-01-22 9:52 UTC (permalink / raw)
To: u-boot
Hi Bhuvanchandra,
On Fri, Jan 22, 2016 at 3:49 PM, Bhuvanchandra DV
<bhuvanchandra.dv@toradex.com> wrote:
> Add device tree files and enable serial support
> ---
> arch/arm/dts/Makefile | 3 ++-
> arch/arm/dts/vf610-twr.dts | 27 +++++++++++++++++++++++++++
> configs/vf610twr_dtb_defconfig | 13 +++++++++++++
> 3 files changed, 42 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/dts/vf610-twr.dts
> create mode 100644 configs/vf610twr_dtb_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index f66ff41..c6fb50c 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -190,7 +190,8 @@ dtb-$(CONFIG_MACH_SUN9I) += \
> sun9i-a80-cubieboard4.dtb
>
> dtb-$(CONFIG_VF610) += vf500-colibri.dtb \
> - vf610-colibri.dtb
> + vf610-colibri.dtb \
> + vf610-twr.dtb
>
> dtb-$(CONFIG_SOC_KEYSTONE) += k2hk-evm.dtb \
> k2l-evm.dtb \
> diff --git a/arch/arm/dts/vf610-twr.dts b/arch/arm/dts/vf610-twr.dts
> new file mode 100644
> index 0000000..8f86a80
> --- /dev/null
> +++ b/arch/arm/dts/vf610-twr.dts
> @@ -0,0 +1,27 @@
> +/*
> + * Copyright 2016 Toradex AG
> + *
> + * SPDX-License-Identifier: GPL-2.0+ or X11
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
Since there is already SPDX license, we can remove the full one.
> +/dts-v1/;
> +#include "vf.dtsi"
> +
> +/ {
> + model = "VF610 Tower Board";
> + compatible = "fsl,vf610-twr", "fsl,vf610";
> +
> + choosen {
> + stdout-path = &uart1;
> + };
> +
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> diff --git a/configs/vf610twr_dtb_defconfig b/configs/vf610twr_dtb_defconfig
_dtb again?
> new file mode 100644
> index 0000000..24a7223
> --- /dev/null
> +++ b/configs/vf610twr_dtb_defconfig
> @@ -0,0 +1,13 @@
> +CONFIG_ARM=y
> +CONFIG_TARGET_VF610TWR=y
> +CONFIG_DEFAULT_DEVICE_TREE="vf610-twr"
> +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_IS_IN_MMC"
> +# CONFIG_CMD_IMLS is not set
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_NAND_VF610_NFC=y
> +CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_DM=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_DM_SERIAL=y
> +CONFIG_FSL_LPUART=y
> --
Please reorder this via 'make savedefconfig'.
Regards,
Bin
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [PATCH 4/7] arm: pcm052: Add device tree files
2016-01-22 7:49 ` [U-Boot] [PATCH 4/7] arm: pcm052: " Bhuvanchandra DV
@ 2016-01-22 9:53 ` Bin Meng
0 siblings, 0 replies; 19+ messages in thread
From: Bin Meng @ 2016-01-22 9:53 UTC (permalink / raw)
To: u-boot
Hi Bhuvanchandra,
On Fri, Jan 22, 2016 at 3:49 PM, Bhuvanchandra DV
<bhuvanchandra.dv@toradex.com> wrote:
> Add device tree files and enable serial support
> ---
> arch/arm/dts/Makefile | 3 ++-
> arch/arm/dts/pcm052.dts | 27 +++++++++++++++++++++++++++
> configs/pcm052_dtb_defconfig | 10 ++++++++++
> 3 files changed, 39 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/dts/pcm052.dts
> create mode 100644 configs/pcm052_dtb_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index c6fb50c..b3bde5a 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -191,7 +191,8 @@ dtb-$(CONFIG_MACH_SUN9I) += \
>
> dtb-$(CONFIG_VF610) += vf500-colibri.dtb \
> vf610-colibri.dtb \
> - vf610-twr.dtb
> + vf610-twr.dtb \
> + pcm052.dtb
>
> dtb-$(CONFIG_SOC_KEYSTONE) += k2hk-evm.dtb \
> k2l-evm.dtb \
> diff --git a/arch/arm/dts/pcm052.dts b/arch/arm/dts/pcm052.dts
> new file mode 100644
> index 0000000..068ba2f
> --- /dev/null
> +++ b/arch/arm/dts/pcm052.dts
> @@ -0,0 +1,27 @@
> +/*
> + * Copyright 2016 Toradex AG
> + *
> + * SPDX-License-Identifier: GPL-2.0+ or X11
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +/dts-v1/;
> +#include "vf.dtsi"
> +
> +/ {
> + model = "Phytec phyCORE-Vybrid";
> + compatible = "phytec,pcm052", "fsl,vf610";
> +
> + choosen {
> + stdout-path = &uart1;
> + };
> +
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> diff --git a/configs/pcm052_dtb_defconfig b/configs/pcm052_dtb_defconfig
> new file mode 100644
> index 0000000..877d973
> --- /dev/null
> +++ b/configs/pcm052_dtb_defconfig
> @@ -0,0 +1,10 @@
> +CONFIG_ARM=y
> +CONFIG_TARGET_PCM052=y
> +CONFIG_DEFAULT_DEVICE_TREE="pcm-052"
> +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/phytec/pcm052/imximage.cfg,ENV_IS_IN_NAND"
> +CONFIG_NAND_VF610_NFC=y
> +CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
> +CONFIG_DM=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_DM_SERIAL=y
> +CONFIG_FSL_LPUART=y
> --
Please fix the same issues I mentioned in previous patches.
Regards,
Bin
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [PATCH 5/7] dm: lpuart: Drop the legacy code
2016-01-22 7:49 ` [U-Boot] [PATCH 5/7] dm: lpuart: Drop the legacy code Bhuvanchandra DV
@ 2016-01-22 9:54 ` Bin Meng
0 siblings, 0 replies; 19+ messages in thread
From: Bin Meng @ 2016-01-22 9:54 UTC (permalink / raw)
To: u-boot
On Fri, Jan 22, 2016 at 3:49 PM, Bhuvanchandra DV
<bhuvanchandra.dv@toradex.com> wrote:
> All boards using this driver are with device tree support,
> hence drop the legacy code in driver to have a pure DT solution.
> ---
> drivers/serial/serial_lpuart.c | 101 +----------------------------------------
> 1 file changed, 2 insertions(+), 99 deletions(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [PATCH 6/7] arm: vybrid: Drop enabling serial in legacy mode
2016-01-22 7:49 ` [U-Boot] [PATCH 6/7] arm: vybrid: Drop enabling serial in legacy mode Bhuvanchandra DV
@ 2016-01-22 9:54 ` Bin Meng
0 siblings, 0 replies; 19+ messages in thread
From: Bin Meng @ 2016-01-22 9:54 UTC (permalink / raw)
To: u-boot
On Fri, Jan 22, 2016 at 3:49 PM, Bhuvanchandra DV
<bhuvanchandra.dv@toradex.com> wrote:
> Remove the legacy way of handling serial ports on Vybrid based
> boards since lpuart driver now only supports DT mode.
> ---
> include/configs/colibri_vf.h | 3 ---
> include/configs/pcm052.h | 3 ---
> include/configs/vf610twr.h | 3 ---
> 3 files changed, 9 deletions(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [PATCH 7/7] arm: vf: Remove the legacy defconfigs
2016-01-22 7:49 ` [U-Boot] [PATCH 7/7] arm: vf: Remove the legacy defconfigs Bhuvanchandra DV
@ 2016-01-22 9:55 ` Bin Meng
2016-01-22 12:21 ` Bhuvanchandra DV
0 siblings, 1 reply; 19+ messages in thread
From: Bin Meng @ 2016-01-22 9:55 UTC (permalink / raw)
To: u-boot
Hi Bhuvanchandra,
On Fri, Jan 22, 2016 at 3:49 PM, Bhuvanchandra DV
<bhuvanchandra.dv@toradex.com> wrote:
> Let's go with pure DT solution!
> Since in long run U-Boot anyway is evolving to pure DT solution.
> ---
> configs/colibri_vf_defconfig | 11 -----------
> configs/pcm052_defconfig | 6 ------
> configs/vf610twr_defconfig | 9 ---------
> 3 files changed, 26 deletions(-)
> delete mode 100644 configs/colibri_vf_defconfig
> delete mode 100644 configs/pcm052_defconfig
> delete mode 100644 configs/vf610twr_defconfig
>
If you chose updating existing defconfig files, I believe we don't
need this patch.
[snip]
Regards,
Bin
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [PATCH 2/7] arm: colibri-vf: Enable serial support
2016-01-22 9:52 ` Bin Meng
@ 2016-01-22 12:21 ` Bhuvanchandra DV
0 siblings, 0 replies; 19+ messages in thread
From: Bhuvanchandra DV @ 2016-01-22 12:21 UTC (permalink / raw)
To: u-boot
Hi Bin,
On 01/22/2016 03:22 PM, Bin Meng wrote:
> Hi Bhuvanchandra,
>
> On Fri, Jan 22, 2016 at 3:49 PM, Bhuvanchandra DV
> <bhuvanchandra.dv@toradex.com> wrote:
>> ---
>
> Please always include a commit message.
Okay
>
>> arch/arm/dts/vf-colibri.dtsi | 10 ++++++++++
>> configs/colibri_vf_dtb_defconfig | 1 +
>> 2 files changed, 11 insertions(+)
>>
>> diff --git a/arch/arm/dts/vf-colibri.dtsi b/arch/arm/dts/vf-colibri.dtsi
>> index 7a8e9bee..0718486 100644
>> --- a/arch/arm/dts/vf-colibri.dtsi
>> +++ b/arch/arm/dts/vf-colibri.dtsi
>> @@ -10,6 +10,12 @@
>> */
>> #include "vf.dtsi"
>>
>> +/ {
>> + chosen {
>> + stdout-path = &uart0;
>> + };
>> +};
>> +
>> &dspi1 {
>> status = "okay";
>> bus-num = <1>;
>> @@ -19,3 +25,7 @@
>> spi-max-frequency = <50000000>;
>> };
>> };
>> +
>> +&uart0 {
>> + status = "okay";
>> +};
>> diff --git a/configs/colibri_vf_dtb_defconfig b/configs/colibri_vf_dtb_defconfig
>
> Why adding _dtb here? Can we update the existing defconfig files?
>
>> index b1a843a..b204fb8 100644
>> --- a/configs/colibri_vf_dtb_defconfig
>> +++ b/configs/colibri_vf_dtb_defconfig
>> @@ -11,4 +11,5 @@ CONFIG_OF_CONTROL=y
>> CONFIG_DM=y
>> CONFIG_NAND_VF610_NFC=y
>> CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y
>> +CONFIG_DM_SERIAL=y
>> CONFIG_FSL_LPUART=y
>> --
>
> Please try to insert new Kconfig options in a correct order. You can
> get it via 'make savedefconfig'.
Will do it.
>
> Regards,
> Bin
>
--
Best regards,
Bhuvan
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [PATCH 3/7] arm: vf610-twr: Add device tree files
2016-01-22 9:52 ` Bin Meng
@ 2016-01-22 12:21 ` Bhuvanchandra DV
0 siblings, 0 replies; 19+ messages in thread
From: Bhuvanchandra DV @ 2016-01-22 12:21 UTC (permalink / raw)
To: u-boot
On 01/22/2016 03:22 PM, Bin Meng wrote:
> Hi Bhuvanchandra,
>
> On Fri, Jan 22, 2016 at 3:49 PM, Bhuvanchandra DV
> <bhuvanchandra.dv@toradex.com> wrote:
>> Add device tree files and enable serial support
>> ---
>> arch/arm/dts/Makefile | 3 ++-
>> arch/arm/dts/vf610-twr.dts | 27 +++++++++++++++++++++++++++
>> configs/vf610twr_dtb_defconfig | 13 +++++++++++++
>> 3 files changed, 42 insertions(+), 1 deletion(-)
>> create mode 100644 arch/arm/dts/vf610-twr.dts
>> create mode 100644 configs/vf610twr_dtb_defconfig
>>
>> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
>> index f66ff41..c6fb50c 100644
>> --- a/arch/arm/dts/Makefile
>> +++ b/arch/arm/dts/Makefile
>> @@ -190,7 +190,8 @@ dtb-$(CONFIG_MACH_SUN9I) += \
>> sun9i-a80-cubieboard4.dtb
>>
>> dtb-$(CONFIG_VF610) += vf500-colibri.dtb \
>> - vf610-colibri.dtb
>> + vf610-colibri.dtb \
>> + vf610-twr.dtb
>>
>> dtb-$(CONFIG_SOC_KEYSTONE) += k2hk-evm.dtb \
>> k2l-evm.dtb \
>> diff --git a/arch/arm/dts/vf610-twr.dts b/arch/arm/dts/vf610-twr.dts
>> new file mode 100644
>> index 0000000..8f86a80
>> --- /dev/null
>> +++ b/arch/arm/dts/vf610-twr.dts
>> @@ -0,0 +1,27 @@
>> +/*
>> + * Copyright 2016 Toradex AG
>> + *
>> + * SPDX-License-Identifier: GPL-2.0+ or X11
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + */
>> +
>
> Since there is already SPDX license, we can remove the full one.
Okay.
>
>> +/dts-v1/;
>> +#include "vf.dtsi"
>> +
>> +/ {
>> + model = "VF610 Tower Board";
>> + compatible = "fsl,vf610-twr", "fsl,vf610";
>> +
>> + choosen {
>> + stdout-path = &uart1;
>> + };
>> +
>> +};
>> +
>> +&uart1 {
>> + status = "okay";
>> +};
>> diff --git a/configs/vf610twr_dtb_defconfig b/configs/vf610twr_dtb_defconfig
>
> _dtb again?
>
>> new file mode 100644
>> index 0000000..24a7223
>> --- /dev/null
>> +++ b/configs/vf610twr_dtb_defconfig
>> @@ -0,0 +1,13 @@
>> +CONFIG_ARM=y
>> +CONFIG_TARGET_VF610TWR=y
>> +CONFIG_DEFAULT_DEVICE_TREE="vf610-twr"
>> +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_IS_IN_MMC"
>> +# CONFIG_CMD_IMLS is not set
>> +# CONFIG_CMD_SETEXPR is not set
>> +CONFIG_NAND_VF610_NFC=y
>> +CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
>> +CONFIG_SPI_FLASH=y
>> +CONFIG_DM=y
>> +CONFIG_OF_CONTROL=y
>> +CONFIG_DM_SERIAL=y
>> +CONFIG_FSL_LPUART=y
>> --
>
> Please reorder this via 'make savedefconfig'.
>
> Regards,
> Bin
>
--
Best regards,
Bhuvan
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [PATCH 7/7] arm: vf: Remove the legacy defconfigs
2016-01-22 9:55 ` Bin Meng
@ 2016-01-22 12:21 ` Bhuvanchandra DV
2016-01-22 16:38 ` Stefan Agner
0 siblings, 1 reply; 19+ messages in thread
From: Bhuvanchandra DV @ 2016-01-22 12:21 UTC (permalink / raw)
To: u-boot
On 01/22/2016 03:25 PM, Bin Meng wrote:
> Hi Bhuvanchandra,
>
> On Fri, Jan 22, 2016 at 3:49 PM, Bhuvanchandra DV
> <bhuvanchandra.dv@toradex.com> wrote:
>> Let's go with pure DT solution!
>> Since in long run U-Boot anyway is evolving to pure DT solution.
>> ---
>> configs/colibri_vf_defconfig | 11 -----------
>> configs/pcm052_defconfig | 6 ------
>> configs/vf610twr_defconfig | 9 ---------
>> 3 files changed, 26 deletions(-)
>> delete mode 100644 configs/colibri_vf_defconfig
>> delete mode 100644 configs/pcm052_defconfig
>> delete mode 100644 configs/vf610twr_defconfig
>>
>
> If you chose updating existing defconfig files, I believe we don't
> need this patch.
Okay.
>
> [snip]
>
> Regards,
> Bin
>
--
Best regards,
Bhuvan
^ permalink raw reply [flat|nested] 19+ messages in thread
* [U-Boot] [PATCH 7/7] arm: vf: Remove the legacy defconfigs
2016-01-22 12:21 ` Bhuvanchandra DV
@ 2016-01-22 16:38 ` Stefan Agner
0 siblings, 0 replies; 19+ messages in thread
From: Stefan Agner @ 2016-01-22 16:38 UTC (permalink / raw)
To: u-boot
On 2016-01-22 04:21, Bhuvanchandra DV wrote:
> On 01/22/2016 03:25 PM, Bin Meng wrote:
>> Hi Bhuvanchandra,
>>
>> On Fri, Jan 22, 2016 at 3:49 PM, Bhuvanchandra DV
>> <bhuvanchandra.dv@toradex.com> wrote:
>>> Let's go with pure DT solution!
>>> Since in long run U-Boot anyway is evolving to pure DT solution.
>>> ---
>>> configs/colibri_vf_defconfig | 11 -----------
>>> configs/pcm052_defconfig | 6 ------
>>> configs/vf610twr_defconfig | 9 ---------
>>> 3 files changed, 26 deletions(-)
>>> delete mode 100644 configs/colibri_vf_defconfig
>>> delete mode 100644 configs/pcm052_defconfig
>>> delete mode 100644 configs/vf610twr_defconfig
>>>
>>
>> If you chose updating existing defconfig files, I believe we don't
>> need this patch.
>
> Okay.
>
I agree with Bin, lets drop the dtb in the defconfigs.
For colibri_vf, you probably should remove the colibri_vf_defconfig and
rename colibri_vf_dtb_defconfig in a first patch, and then add the
additional stuff in a later patch
For the other boards, just use the defconfigs without dtb in it from
start.
--
Stefan
>>
>> [snip]
>>
>> Regards,
>> Bin
>>
^ permalink raw reply [flat|nested] 19+ messages in thread
end of thread, other threads:[~2016-01-22 16:38 UTC | newest]
Thread overview: 19+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-01-22 7:49 [U-Boot] [PATCH 0/7] Add/enable lpuart support on Vybrid based boards Bhuvanchandra DV
2016-01-22 7:49 ` [U-Boot] [PATCH 1/7] arm: vf: Enable lpuart support Bhuvanchandra DV
2016-01-22 9:52 ` Bin Meng
2016-01-22 7:49 ` [U-Boot] [PATCH 2/7] arm: colibri-vf: Enable serial support Bhuvanchandra DV
2016-01-22 9:52 ` Bin Meng
2016-01-22 12:21 ` Bhuvanchandra DV
2016-01-22 7:49 ` [U-Boot] [PATCH 3/7] arm: vf610-twr: Add device tree files Bhuvanchandra DV
2016-01-22 9:52 ` Bin Meng
2016-01-22 12:21 ` Bhuvanchandra DV
2016-01-22 7:49 ` [U-Boot] [PATCH 4/7] arm: pcm052: " Bhuvanchandra DV
2016-01-22 9:53 ` Bin Meng
2016-01-22 7:49 ` [U-Boot] [PATCH 5/7] dm: lpuart: Drop the legacy code Bhuvanchandra DV
2016-01-22 9:54 ` Bin Meng
2016-01-22 7:49 ` [U-Boot] [PATCH 6/7] arm: vybrid: Drop enabling serial in legacy mode Bhuvanchandra DV
2016-01-22 9:54 ` Bin Meng
2016-01-22 7:49 ` [U-Boot] [PATCH 7/7] arm: vf: Remove the legacy defconfigs Bhuvanchandra DV
2016-01-22 9:55 ` Bin Meng
2016-01-22 12:21 ` Bhuvanchandra DV
2016-01-22 16:38 ` Stefan Agner
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.