* [PATCH v4 1/3] ASoC: pcm179x: Split into core and SPI parts
2016-01-22 12:39 [PATCH v4 0/3] ASoC: pcm179x: Add I2C support, declare support for continuous rates Jacob Siverskog
@ 2016-01-22 12:39 ` Jacob Siverskog
2016-01-29 0:22 ` Applied "ASoC: pcm179x: Split into core and SPI parts" to the asoc tree Mark Brown
2016-01-22 12:39 ` [PATCH v4 2/3] ASoC: pcm179x: Add I2C interface driver Jacob Siverskog
` (2 subsequent siblings)
3 siblings, 1 reply; 8+ messages in thread
From: Jacob Siverskog @ 2016-01-22 12:39 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown
Cc: Jaroslav Kysela, Takashi Iwai, Michael Trimarchi, Johan Hovold,
alsa-devel, linux-kernel, Jacob Siverskog
The pcm179x family supports both SPI and I2C for configuration. This
patch splits the driver into core and SPI parts, in preparation for
I2C support.
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
---
sound/soc/codecs/Kconfig | 11 +++++--
sound/soc/codecs/Makefile | 2 ++
sound/soc/codecs/pcm179x-spi.c | 72 ++++++++++++++++++++++++++++++++++++++++++
sound/soc/codecs/pcm179x.c | 52 +++++++-----------------------
sound/soc/codecs/pcm179x.h | 5 +++
5 files changed, 99 insertions(+), 43 deletions(-)
create mode 100644 sound/soc/codecs/pcm179x-spi.c
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 50693c8..ae720f1 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -87,7 +87,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_ML26124 if I2C
select SND_SOC_NAU8825 if I2C
select SND_SOC_PCM1681 if I2C
- select SND_SOC_PCM179X if SPI_MASTER
+ select SND_SOC_PCM179X_SPI if SPI_MASTER
select SND_SOC_PCM3008
select SND_SOC_PCM3168A_I2C if I2C
select SND_SOC_PCM3168A_SPI if SPI_MASTER
@@ -527,8 +527,15 @@ config SND_SOC_PCM1681
depends on I2C
config SND_SOC_PCM179X
- tristate "Texas Instruments PCM179X CODEC"
+ tristate
+
+config SND_SOC_PCM179X_SPI
+ tristate "Texas Instruments PCM179X CODEC (SPI)"
depends on SPI_MASTER
+ select SND_SOC_PCM179X
+ help
+ Enable support for Texas Instruments PCM179x CODEC.
+ Select this if your PCM179x is connected via an SPI bus.
config SND_SOC_PCM3008
tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index d44f7d3..56e94d8 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -81,6 +81,7 @@ snd-soc-ml26124-objs := ml26124.o
snd-soc-nau8825-objs := nau8825.o
snd-soc-pcm1681-objs := pcm1681.o
snd-soc-pcm179x-codec-objs := pcm179x.o
+snd-soc-pcm179x-spi-objs := pcm179x-spi.o
snd-soc-pcm3008-objs := pcm3008.o
snd-soc-pcm3168a-objs := pcm3168a.o
snd-soc-pcm3168a-i2c-objs := pcm3168a-i2c.o
@@ -285,6 +286,7 @@ obj-$(CONFIG_SND_SOC_ML26124) += snd-soc-ml26124.o
obj-$(CONFIG_SND_SOC_NAU8825) += snd-soc-nau8825.o
obj-$(CONFIG_SND_SOC_PCM1681) += snd-soc-pcm1681.o
obj-$(CONFIG_SND_SOC_PCM179X) += snd-soc-pcm179x-codec.o
+obj-$(CONFIG_SND_SOC_PCM179X_SPI) += snd-soc-pcm179x-spi.o
obj-$(CONFIG_SND_SOC_PCM3008) += snd-soc-pcm3008.o
obj-$(CONFIG_SND_SOC_PCM3168A) += snd-soc-pcm3168a.o
obj-$(CONFIG_SND_SOC_PCM3168A_I2C) += snd-soc-pcm3168a-i2c.o
diff --git a/sound/soc/codecs/pcm179x-spi.c b/sound/soc/codecs/pcm179x-spi.c
new file mode 100644
index 0000000..da924d4
--- /dev/null
+++ b/sound/soc/codecs/pcm179x-spi.c
@@ -0,0 +1,72 @@
+/*
+ * PCM179X ASoC SPI driver
+ *
+ * Copyright (c) Amarula Solutions B.V. 2013
+ *
+ * Michael Trimarchi <michael@amarulasolutions.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/spi/spi.h>
+#include <linux/regmap.h>
+
+#include "pcm179x.h"
+
+static int pcm179x_spi_probe(struct spi_device *spi)
+{
+ struct regmap *regmap;
+ int ret;
+
+ regmap = devm_regmap_init_spi(spi, &pcm179x_regmap_config);
+ if (IS_ERR(regmap)) {
+ ret = PTR_ERR(regmap);
+ dev_err(&spi->dev, "Failed to allocate regmap: %d\n", ret);
+ return ret;
+ }
+
+ return pcm179x_common_init(&spi->dev, regmap);
+}
+
+static int pcm179x_spi_remove(struct spi_device *spi)
+{
+ return pcm179x_common_exit(&spi->dev);
+}
+
+static const struct of_device_id pcm179x_of_match[] = {
+ { .compatible = "ti,pcm1792a", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, pcm179x_of_match);
+
+static const struct spi_device_id pcm179x_spi_ids[] = {
+ { "pcm179x", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(spi, pcm179x_spi_ids);
+
+static struct spi_driver pcm179x_spi_driver = {
+ .driver = {
+ .name = "pcm179x",
+ .of_match_table = of_match_ptr(pcm179x_of_match),
+ },
+ .id_table = pcm179x_spi_ids,
+ .probe = pcm179x_spi_probe,
+ .remove = pcm179x_spi_remove,
+};
+
+module_spi_driver(pcm179x_spi_driver);
+
+MODULE_DESCRIPTION("ASoC PCM179X SPI driver");
+MODULE_AUTHOR("Michael Trimarchi <michael@amarulasolutions.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/pcm179x.c b/sound/soc/codecs/pcm179x.c
index a56c7b7..8f20f70 100644
--- a/sound/soc/codecs/pcm179x.c
+++ b/sound/soc/codecs/pcm179x.c
@@ -20,7 +20,6 @@
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/device.h>
-#include <linux/spi/spi.h>
#include <sound/core.h>
#include <sound/pcm.h>
@@ -29,7 +28,6 @@
#include <sound/soc.h>
#include <sound/tlv.h>
#include <linux/of.h>
-#include <linux/of_device.h>
#include "pcm179x.h"
@@ -194,13 +192,7 @@ static struct snd_soc_dai_driver pcm179x_dai = {
.ops = &pcm179x_dai_ops,
};
-static const struct of_device_id pcm179x_of_match[] = {
- { .compatible = "ti,pcm1792a", },
- { }
-};
-MODULE_DEVICE_TABLE(of, pcm179x_of_match);
-
-static const struct regmap_config pcm179x_regmap = {
+const struct regmap_config pcm179x_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = 23,
@@ -209,6 +201,7 @@ static const struct regmap_config pcm179x_regmap = {
.writeable_reg = pcm179x_writeable_reg,
.readable_reg = pcm179x_accessible_reg,
};
+EXPORT_SYMBOL_GPL(pcm179x_regmap_config);
static struct snd_soc_codec_driver soc_codec_dev_pcm179x = {
.controls = pcm179x_controls,
@@ -219,52 +212,29 @@ static struct snd_soc_codec_driver soc_codec_dev_pcm179x = {
.num_dapm_routes = ARRAY_SIZE(pcm179x_dapm_routes),
};
-static int pcm179x_spi_probe(struct spi_device *spi)
+int pcm179x_common_init(struct device *dev, struct regmap *regmap)
{
struct pcm179x_private *pcm179x;
- int ret;
- pcm179x = devm_kzalloc(&spi->dev, sizeof(struct pcm179x_private),
+ pcm179x = devm_kzalloc(dev, sizeof(struct pcm179x_private),
GFP_KERNEL);
if (!pcm179x)
return -ENOMEM;
- spi_set_drvdata(spi, pcm179x);
-
- pcm179x->regmap = devm_regmap_init_spi(spi, &pcm179x_regmap);
- if (IS_ERR(pcm179x->regmap)) {
- ret = PTR_ERR(pcm179x->regmap);
- dev_err(&spi->dev, "Failed to register regmap: %d\n", ret);
- return ret;
- }
+ pcm179x->regmap = regmap;
+ dev_set_drvdata(dev, pcm179x);
- return snd_soc_register_codec(&spi->dev,
+ return snd_soc_register_codec(dev,
&soc_codec_dev_pcm179x, &pcm179x_dai, 1);
}
+EXPORT_SYMBOL_GPL(pcm179x_common_init);
-static int pcm179x_spi_remove(struct spi_device *spi)
+int pcm179x_common_exit(struct device *dev)
{
- snd_soc_unregister_codec(&spi->dev);
+ snd_soc_unregister_codec(dev);
return 0;
}
-
-static const struct spi_device_id pcm179x_spi_ids[] = {
- { "pcm179x", 0 },
- { },
-};
-MODULE_DEVICE_TABLE(spi, pcm179x_spi_ids);
-
-static struct spi_driver pcm179x_codec_driver = {
- .driver = {
- .name = "pcm179x",
- .of_match_table = of_match_ptr(pcm179x_of_match),
- },
- .id_table = pcm179x_spi_ids,
- .probe = pcm179x_spi_probe,
- .remove = pcm179x_spi_remove,
-};
-
-module_spi_driver(pcm179x_codec_driver);
+EXPORT_SYMBOL_GPL(pcm179x_common_exit);
MODULE_DESCRIPTION("ASoC PCM179X driver");
MODULE_AUTHOR("Michael Trimarchi <michael@amarulasolutions.com>");
diff --git a/sound/soc/codecs/pcm179x.h b/sound/soc/codecs/pcm179x.h
index c6fdc06..c4eea4d 100644
--- a/sound/soc/codecs/pcm179x.h
+++ b/sound/soc/codecs/pcm179x.h
@@ -24,4 +24,9 @@
#define PCM1792A_FORMATS (SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S24_LE | \
SNDRV_PCM_FMTBIT_S16_LE)
+extern const struct regmap_config pcm179x_regmap_config;
+
+int pcm179x_common_init(struct device *dev, struct regmap *regmap);
+int pcm179x_common_exit(struct device *dev);
+
#endif
--
2.7.0
^ permalink raw reply related [flat|nested] 8+ messages in thread* Applied "ASoC: pcm179x: Split into core and SPI parts" to the asoc tree
2016-01-22 12:39 ` [PATCH v4 1/3] ASoC: pcm179x: Split into core and SPI parts Jacob Siverskog
@ 2016-01-29 0:22 ` Mark Brown
0 siblings, 0 replies; 8+ messages in thread
From: Mark Brown @ 2016-01-29 0:22 UTC (permalink / raw)
To: Jacob Siverskog, Michael Trimarchi, Mark Brown; +Cc: alsa-devel
The patch
ASoC: pcm179x: Split into core and SPI parts
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 1b347b6891335a30131899dd16ec6ca843c578f0 Mon Sep 17 00:00:00 2001
From: Jacob Siverskog <jacob@teenage.engineering>
Date: Fri, 22 Jan 2016 13:39:53 +0100
Subject: [PATCH] ASoC: pcm179x: Split into core and SPI parts
The pcm179x family supports both SPI and I2C for configuration. This
patch splits the driver into core and SPI parts, in preparation for
I2C support.
Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
Reviewed-by: Johan Hovold <johan@kernel.org>
Acked-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
sound/soc/codecs/Kconfig | 11 +++++--
sound/soc/codecs/Makefile | 2 ++
sound/soc/codecs/pcm179x-spi.c | 72 ++++++++++++++++++++++++++++++++++++++++++
sound/soc/codecs/pcm179x.c | 52 +++++++-----------------------
sound/soc/codecs/pcm179x.h | 5 +++
5 files changed, 99 insertions(+), 43 deletions(-)
create mode 100644 sound/soc/codecs/pcm179x-spi.c
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 50693c8..ae720f1 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -87,7 +87,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_ML26124 if I2C
select SND_SOC_NAU8825 if I2C
select SND_SOC_PCM1681 if I2C
- select SND_SOC_PCM179X if SPI_MASTER
+ select SND_SOC_PCM179X_SPI if SPI_MASTER
select SND_SOC_PCM3008
select SND_SOC_PCM3168A_I2C if I2C
select SND_SOC_PCM3168A_SPI if SPI_MASTER
@@ -527,8 +527,15 @@ config SND_SOC_PCM1681
depends on I2C
config SND_SOC_PCM179X
- tristate "Texas Instruments PCM179X CODEC"
+ tristate
+
+config SND_SOC_PCM179X_SPI
+ tristate "Texas Instruments PCM179X CODEC (SPI)"
depends on SPI_MASTER
+ select SND_SOC_PCM179X
+ help
+ Enable support for Texas Instruments PCM179x CODEC.
+ Select this if your PCM179x is connected via an SPI bus.
config SND_SOC_PCM3008
tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index d44f7d3..56e94d8 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -81,6 +81,7 @@ snd-soc-ml26124-objs := ml26124.o
snd-soc-nau8825-objs := nau8825.o
snd-soc-pcm1681-objs := pcm1681.o
snd-soc-pcm179x-codec-objs := pcm179x.o
+snd-soc-pcm179x-spi-objs := pcm179x-spi.o
snd-soc-pcm3008-objs := pcm3008.o
snd-soc-pcm3168a-objs := pcm3168a.o
snd-soc-pcm3168a-i2c-objs := pcm3168a-i2c.o
@@ -285,6 +286,7 @@ obj-$(CONFIG_SND_SOC_ML26124) += snd-soc-ml26124.o
obj-$(CONFIG_SND_SOC_NAU8825) += snd-soc-nau8825.o
obj-$(CONFIG_SND_SOC_PCM1681) += snd-soc-pcm1681.o
obj-$(CONFIG_SND_SOC_PCM179X) += snd-soc-pcm179x-codec.o
+obj-$(CONFIG_SND_SOC_PCM179X_SPI) += snd-soc-pcm179x-spi.o
obj-$(CONFIG_SND_SOC_PCM3008) += snd-soc-pcm3008.o
obj-$(CONFIG_SND_SOC_PCM3168A) += snd-soc-pcm3168a.o
obj-$(CONFIG_SND_SOC_PCM3168A_I2C) += snd-soc-pcm3168a-i2c.o
diff --git a/sound/soc/codecs/pcm179x-spi.c b/sound/soc/codecs/pcm179x-spi.c
new file mode 100644
index 0000000..da924d4
--- /dev/null
+++ b/sound/soc/codecs/pcm179x-spi.c
@@ -0,0 +1,72 @@
+/*
+ * PCM179X ASoC SPI driver
+ *
+ * Copyright (c) Amarula Solutions B.V. 2013
+ *
+ * Michael Trimarchi <michael@amarulasolutions.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/spi/spi.h>
+#include <linux/regmap.h>
+
+#include "pcm179x.h"
+
+static int pcm179x_spi_probe(struct spi_device *spi)
+{
+ struct regmap *regmap;
+ int ret;
+
+ regmap = devm_regmap_init_spi(spi, &pcm179x_regmap_config);
+ if (IS_ERR(regmap)) {
+ ret = PTR_ERR(regmap);
+ dev_err(&spi->dev, "Failed to allocate regmap: %d\n", ret);
+ return ret;
+ }
+
+ return pcm179x_common_init(&spi->dev, regmap);
+}
+
+static int pcm179x_spi_remove(struct spi_device *spi)
+{
+ return pcm179x_common_exit(&spi->dev);
+}
+
+static const struct of_device_id pcm179x_of_match[] = {
+ { .compatible = "ti,pcm1792a", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, pcm179x_of_match);
+
+static const struct spi_device_id pcm179x_spi_ids[] = {
+ { "pcm179x", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(spi, pcm179x_spi_ids);
+
+static struct spi_driver pcm179x_spi_driver = {
+ .driver = {
+ .name = "pcm179x",
+ .of_match_table = of_match_ptr(pcm179x_of_match),
+ },
+ .id_table = pcm179x_spi_ids,
+ .probe = pcm179x_spi_probe,
+ .remove = pcm179x_spi_remove,
+};
+
+module_spi_driver(pcm179x_spi_driver);
+
+MODULE_DESCRIPTION("ASoC PCM179X SPI driver");
+MODULE_AUTHOR("Michael Trimarchi <michael@amarulasolutions.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/pcm179x.c b/sound/soc/codecs/pcm179x.c
index a56c7b7..8f20f70 100644
--- a/sound/soc/codecs/pcm179x.c
+++ b/sound/soc/codecs/pcm179x.c
@@ -20,7 +20,6 @@
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/device.h>
-#include <linux/spi/spi.h>
#include <sound/core.h>
#include <sound/pcm.h>
@@ -29,7 +28,6 @@
#include <sound/soc.h>
#include <sound/tlv.h>
#include <linux/of.h>
-#include <linux/of_device.h>
#include "pcm179x.h"
@@ -194,13 +192,7 @@ static struct snd_soc_dai_driver pcm179x_dai = {
.ops = &pcm179x_dai_ops,
};
-static const struct of_device_id pcm179x_of_match[] = {
- { .compatible = "ti,pcm1792a", },
- { }
-};
-MODULE_DEVICE_TABLE(of, pcm179x_of_match);
-
-static const struct regmap_config pcm179x_regmap = {
+const struct regmap_config pcm179x_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = 23,
@@ -209,6 +201,7 @@ static const struct regmap_config pcm179x_regmap = {
.writeable_reg = pcm179x_writeable_reg,
.readable_reg = pcm179x_accessible_reg,
};
+EXPORT_SYMBOL_GPL(pcm179x_regmap_config);
static struct snd_soc_codec_driver soc_codec_dev_pcm179x = {
.controls = pcm179x_controls,
@@ -219,52 +212,29 @@ static struct snd_soc_codec_driver soc_codec_dev_pcm179x = {
.num_dapm_routes = ARRAY_SIZE(pcm179x_dapm_routes),
};
-static int pcm179x_spi_probe(struct spi_device *spi)
+int pcm179x_common_init(struct device *dev, struct regmap *regmap)
{
struct pcm179x_private *pcm179x;
- int ret;
- pcm179x = devm_kzalloc(&spi->dev, sizeof(struct pcm179x_private),
+ pcm179x = devm_kzalloc(dev, sizeof(struct pcm179x_private),
GFP_KERNEL);
if (!pcm179x)
return -ENOMEM;
- spi_set_drvdata(spi, pcm179x);
-
- pcm179x->regmap = devm_regmap_init_spi(spi, &pcm179x_regmap);
- if (IS_ERR(pcm179x->regmap)) {
- ret = PTR_ERR(pcm179x->regmap);
- dev_err(&spi->dev, "Failed to register regmap: %d\n", ret);
- return ret;
- }
+ pcm179x->regmap = regmap;
+ dev_set_drvdata(dev, pcm179x);
- return snd_soc_register_codec(&spi->dev,
+ return snd_soc_register_codec(dev,
&soc_codec_dev_pcm179x, &pcm179x_dai, 1);
}
+EXPORT_SYMBOL_GPL(pcm179x_common_init);
-static int pcm179x_spi_remove(struct spi_device *spi)
+int pcm179x_common_exit(struct device *dev)
{
- snd_soc_unregister_codec(&spi->dev);
+ snd_soc_unregister_codec(dev);
return 0;
}
-
-static const struct spi_device_id pcm179x_spi_ids[] = {
- { "pcm179x", 0 },
- { },
-};
-MODULE_DEVICE_TABLE(spi, pcm179x_spi_ids);
-
-static struct spi_driver pcm179x_codec_driver = {
- .driver = {
- .name = "pcm179x",
- .of_match_table = of_match_ptr(pcm179x_of_match),
- },
- .id_table = pcm179x_spi_ids,
- .probe = pcm179x_spi_probe,
- .remove = pcm179x_spi_remove,
-};
-
-module_spi_driver(pcm179x_codec_driver);
+EXPORT_SYMBOL_GPL(pcm179x_common_exit);
MODULE_DESCRIPTION("ASoC PCM179X driver");
MODULE_AUTHOR("Michael Trimarchi <michael@amarulasolutions.com>");
diff --git a/sound/soc/codecs/pcm179x.h b/sound/soc/codecs/pcm179x.h
index c6fdc06..c4eea4d 100644
--- a/sound/soc/codecs/pcm179x.h
+++ b/sound/soc/codecs/pcm179x.h
@@ -24,4 +24,9 @@
#define PCM1792A_FORMATS (SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S24_LE | \
SNDRV_PCM_FMTBIT_S16_LE)
+extern const struct regmap_config pcm179x_regmap_config;
+
+int pcm179x_common_init(struct device *dev, struct regmap *regmap);
+int pcm179x_common_exit(struct device *dev);
+
#endif
--
2.6.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v4 2/3] ASoC: pcm179x: Add I2C interface driver
2016-01-22 12:39 [PATCH v4 0/3] ASoC: pcm179x: Add I2C support, declare support for continuous rates Jacob Siverskog
2016-01-22 12:39 ` [PATCH v4 1/3] ASoC: pcm179x: Split into core and SPI parts Jacob Siverskog
@ 2016-01-22 12:39 ` Jacob Siverskog
2016-01-29 0:22 ` Applied "ASoC: pcm179x: Add I2C interface driver" to the asoc tree Mark Brown
2016-01-22 12:39 ` [PATCH v4 3/3] ASoC: pcm179x: Support continuous rates Jacob Siverskog
2016-01-22 13:45 ` Michael Trimarchi
3 siblings, 1 reply; 8+ messages in thread
From: Jacob Siverskog @ 2016-01-22 12:39 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown
Cc: Jaroslav Kysela, Takashi Iwai, Michael Trimarchi, Johan Hovold,
alsa-devel, linux-kernel, Jacob Siverskog
The PCM179x family supports both SPI and I2C. This patch adds support
for the I2C interface.
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
---
.../devicetree/bindings/sound/pcm179x.txt | 11 +++-
sound/soc/codecs/Kconfig | 9 +++
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/pcm179x-i2c.c | 73 ++++++++++++++++++++++
4 files changed, 94 insertions(+), 1 deletion(-)
create mode 100644 sound/soc/codecs/pcm179x-i2c.c
diff --git a/Documentation/devicetree/bindings/sound/pcm179x.txt b/Documentation/devicetree/bindings/sound/pcm179x.txt
index 4ae70d3..436c2b2 100644
--- a/Documentation/devicetree/bindings/sound/pcm179x.txt
+++ b/Documentation/devicetree/bindings/sound/pcm179x.txt
@@ -1,6 +1,6 @@
Texas Instruments pcm179x DT bindings
-This driver supports the SPI bus.
+This driver supports both the I2C and SPI bus.
Required properties:
@@ -9,6 +9,11 @@ Required properties:
For required properties on SPI, please consult
Documentation/devicetree/bindings/spi/spi-bus.txt
+Required properties on I2C:
+
+ - reg: the I2C address
+
+
Examples:
codec_spi: 1792a@0 {
@@ -16,3 +21,7 @@ Examples:
spi-max-frequency = <600000>;
};
+ codec_i2c: 1792a@4c {
+ compatible = "ti,pcm1792a";
+ reg = <0x4c>;
+ };
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index ae720f1..3a8fcf1 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -87,6 +87,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_ML26124 if I2C
select SND_SOC_NAU8825 if I2C
select SND_SOC_PCM1681 if I2C
+ select SND_SOC_PCM179X_I2C if I2C
select SND_SOC_PCM179X_SPI if SPI_MASTER
select SND_SOC_PCM3008
select SND_SOC_PCM3168A_I2C if I2C
@@ -529,6 +530,14 @@ config SND_SOC_PCM1681
config SND_SOC_PCM179X
tristate
+config SND_SOC_PCM179X_I2C
+ tristate "Texas Instruments PCM179X CODEC (I2C)"
+ depends on I2C
+ select SND_SOC_PCM179X
+ help
+ Enable support for Texas Instruments PCM179x CODEC.
+ Select this if your PCM179x is connected via an I2C bus.
+
config SND_SOC_PCM179X_SPI
tristate "Texas Instruments PCM179X CODEC (SPI)"
depends on SPI_MASTER
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index 56e94d8..9acd777 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -81,6 +81,7 @@ snd-soc-ml26124-objs := ml26124.o
snd-soc-nau8825-objs := nau8825.o
snd-soc-pcm1681-objs := pcm1681.o
snd-soc-pcm179x-codec-objs := pcm179x.o
+snd-soc-pcm179x-i2c-objs := pcm179x-i2c.o
snd-soc-pcm179x-spi-objs := pcm179x-spi.o
snd-soc-pcm3008-objs := pcm3008.o
snd-soc-pcm3168a-objs := pcm3168a.o
@@ -286,6 +287,7 @@ obj-$(CONFIG_SND_SOC_ML26124) += snd-soc-ml26124.o
obj-$(CONFIG_SND_SOC_NAU8825) += snd-soc-nau8825.o
obj-$(CONFIG_SND_SOC_PCM1681) += snd-soc-pcm1681.o
obj-$(CONFIG_SND_SOC_PCM179X) += snd-soc-pcm179x-codec.o
+obj-$(CONFIG_SND_SOC_PCM179X_I2C) += snd-soc-pcm179x-i2c.o
obj-$(CONFIG_SND_SOC_PCM179X_SPI) += snd-soc-pcm179x-spi.o
obj-$(CONFIG_SND_SOC_PCM3008) += snd-soc-pcm3008.o
obj-$(CONFIG_SND_SOC_PCM3168A) += snd-soc-pcm3168a.o
diff --git a/sound/soc/codecs/pcm179x-i2c.c b/sound/soc/codecs/pcm179x-i2c.c
new file mode 100644
index 0000000..4118106
--- /dev/null
+++ b/sound/soc/codecs/pcm179x-i2c.c
@@ -0,0 +1,73 @@
+/*
+ * PCM179X ASoC I2C driver
+ *
+ * Copyright (c) Teenage Engineering AB 2016
+ *
+ * Jacob Siverskog <jacob@teenage.engineering>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+
+#include "pcm179x.h"
+
+static int pcm179x_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct regmap *regmap;
+ int ret;
+
+ regmap = devm_regmap_init_i2c(client, &pcm179x_regmap_config);
+ if (IS_ERR(regmap)) {
+ ret = PTR_ERR(regmap);
+ dev_err(&client->dev, "Failed to allocate regmap: %d\n", ret);
+ return ret;
+ }
+
+ return pcm179x_common_init(&client->dev, regmap);
+}
+
+static int pcm179x_i2c_remove(struct i2c_client *client)
+{
+ return pcm179x_common_exit(&client->dev);
+}
+
+static const struct of_device_id pcm179x_of_match[] = {
+ { .compatible = "ti,pcm1792a", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, pcm179x_of_match);
+
+static const struct i2c_device_id pcm179x_i2c_ids[] = {
+ { "pcm179x", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, pcm179x_i2c_ids);
+
+static struct i2c_driver pcm179x_i2c_driver = {
+ .driver = {
+ .name = "pcm179x",
+ .of_match_table = of_match_ptr(pcm179x_of_match),
+ },
+ .id_table = pcm179x_i2c_ids,
+ .probe = pcm179x_i2c_probe,
+ .remove = pcm179x_i2c_remove,
+};
+
+module_i2c_driver(pcm179x_i2c_driver);
+
+MODULE_DESCRIPTION("ASoC PCM179X I2C driver");
+MODULE_AUTHOR("Jacob Siverskog <jacob@teenage.engineering>");
+MODULE_LICENSE("GPL");
--
2.7.0
^ permalink raw reply related [flat|nested] 8+ messages in thread* Applied "ASoC: pcm179x: Add I2C interface driver" to the asoc tree
2016-01-22 12:39 ` [PATCH v4 2/3] ASoC: pcm179x: Add I2C interface driver Jacob Siverskog
@ 2016-01-29 0:22 ` Mark Brown
0 siblings, 0 replies; 8+ messages in thread
From: Mark Brown @ 2016-01-29 0:22 UTC (permalink / raw)
To: Jacob Siverskog, Michael Trimarchi, Mark Brown; +Cc: alsa-devel
The patch
ASoC: pcm179x: Add I2C interface driver
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 70e3e56e6c3d499be47322037ed4a42314a8e509 Mon Sep 17 00:00:00 2001
From: Jacob Siverskog <jacob@teenage.engineering>
Date: Fri, 22 Jan 2016 13:39:54 +0100
Subject: [PATCH] ASoC: pcm179x: Add I2C interface driver
The PCM179x family supports both SPI and I2C. This patch adds support
for the I2C interface.
Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
Reviewed-by: Johan Hovold <johan@kernel.org>
Acked-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
.../devicetree/bindings/sound/pcm179x.txt | 11 +++-
sound/soc/codecs/Kconfig | 9 +++
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/pcm179x-i2c.c | 73 ++++++++++++++++++++++
4 files changed, 94 insertions(+), 1 deletion(-)
create mode 100644 sound/soc/codecs/pcm179x-i2c.c
diff --git a/Documentation/devicetree/bindings/sound/pcm179x.txt b/Documentation/devicetree/bindings/sound/pcm179x.txt
index 4ae70d3..436c2b2 100644
--- a/Documentation/devicetree/bindings/sound/pcm179x.txt
+++ b/Documentation/devicetree/bindings/sound/pcm179x.txt
@@ -1,6 +1,6 @@
Texas Instruments pcm179x DT bindings
-This driver supports the SPI bus.
+This driver supports both the I2C and SPI bus.
Required properties:
@@ -9,6 +9,11 @@ Required properties:
For required properties on SPI, please consult
Documentation/devicetree/bindings/spi/spi-bus.txt
+Required properties on I2C:
+
+ - reg: the I2C address
+
+
Examples:
codec_spi: 1792a@0 {
@@ -16,3 +21,7 @@ Examples:
spi-max-frequency = <600000>;
};
+ codec_i2c: 1792a@4c {
+ compatible = "ti,pcm1792a";
+ reg = <0x4c>;
+ };
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index ae720f1..3a8fcf1 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -87,6 +87,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_ML26124 if I2C
select SND_SOC_NAU8825 if I2C
select SND_SOC_PCM1681 if I2C
+ select SND_SOC_PCM179X_I2C if I2C
select SND_SOC_PCM179X_SPI if SPI_MASTER
select SND_SOC_PCM3008
select SND_SOC_PCM3168A_I2C if I2C
@@ -529,6 +530,14 @@ config SND_SOC_PCM1681
config SND_SOC_PCM179X
tristate
+config SND_SOC_PCM179X_I2C
+ tristate "Texas Instruments PCM179X CODEC (I2C)"
+ depends on I2C
+ select SND_SOC_PCM179X
+ help
+ Enable support for Texas Instruments PCM179x CODEC.
+ Select this if your PCM179x is connected via an I2C bus.
+
config SND_SOC_PCM179X_SPI
tristate "Texas Instruments PCM179X CODEC (SPI)"
depends on SPI_MASTER
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index 56e94d8..9acd777a 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -81,6 +81,7 @@ snd-soc-ml26124-objs := ml26124.o
snd-soc-nau8825-objs := nau8825.o
snd-soc-pcm1681-objs := pcm1681.o
snd-soc-pcm179x-codec-objs := pcm179x.o
+snd-soc-pcm179x-i2c-objs := pcm179x-i2c.o
snd-soc-pcm179x-spi-objs := pcm179x-spi.o
snd-soc-pcm3008-objs := pcm3008.o
snd-soc-pcm3168a-objs := pcm3168a.o
@@ -286,6 +287,7 @@ obj-$(CONFIG_SND_SOC_ML26124) += snd-soc-ml26124.o
obj-$(CONFIG_SND_SOC_NAU8825) += snd-soc-nau8825.o
obj-$(CONFIG_SND_SOC_PCM1681) += snd-soc-pcm1681.o
obj-$(CONFIG_SND_SOC_PCM179X) += snd-soc-pcm179x-codec.o
+obj-$(CONFIG_SND_SOC_PCM179X_I2C) += snd-soc-pcm179x-i2c.o
obj-$(CONFIG_SND_SOC_PCM179X_SPI) += snd-soc-pcm179x-spi.o
obj-$(CONFIG_SND_SOC_PCM3008) += snd-soc-pcm3008.o
obj-$(CONFIG_SND_SOC_PCM3168A) += snd-soc-pcm3168a.o
diff --git a/sound/soc/codecs/pcm179x-i2c.c b/sound/soc/codecs/pcm179x-i2c.c
new file mode 100644
index 0000000..4118106
--- /dev/null
+++ b/sound/soc/codecs/pcm179x-i2c.c
@@ -0,0 +1,73 @@
+/*
+ * PCM179X ASoC I2C driver
+ *
+ * Copyright (c) Teenage Engineering AB 2016
+ *
+ * Jacob Siverskog <jacob@teenage.engineering>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+
+#include "pcm179x.h"
+
+static int pcm179x_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct regmap *regmap;
+ int ret;
+
+ regmap = devm_regmap_init_i2c(client, &pcm179x_regmap_config);
+ if (IS_ERR(regmap)) {
+ ret = PTR_ERR(regmap);
+ dev_err(&client->dev, "Failed to allocate regmap: %d\n", ret);
+ return ret;
+ }
+
+ return pcm179x_common_init(&client->dev, regmap);
+}
+
+static int pcm179x_i2c_remove(struct i2c_client *client)
+{
+ return pcm179x_common_exit(&client->dev);
+}
+
+static const struct of_device_id pcm179x_of_match[] = {
+ { .compatible = "ti,pcm1792a", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, pcm179x_of_match);
+
+static const struct i2c_device_id pcm179x_i2c_ids[] = {
+ { "pcm179x", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, pcm179x_i2c_ids);
+
+static struct i2c_driver pcm179x_i2c_driver = {
+ .driver = {
+ .name = "pcm179x",
+ .of_match_table = of_match_ptr(pcm179x_of_match),
+ },
+ .id_table = pcm179x_i2c_ids,
+ .probe = pcm179x_i2c_probe,
+ .remove = pcm179x_i2c_remove,
+};
+
+module_i2c_driver(pcm179x_i2c_driver);
+
+MODULE_DESCRIPTION("ASoC PCM179X I2C driver");
+MODULE_AUTHOR("Jacob Siverskog <jacob@teenage.engineering>");
+MODULE_LICENSE("GPL");
--
2.6.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v4 3/3] ASoC: pcm179x: Support continuous rates
2016-01-22 12:39 [PATCH v4 0/3] ASoC: pcm179x: Add I2C support, declare support for continuous rates Jacob Siverskog
2016-01-22 12:39 ` [PATCH v4 1/3] ASoC: pcm179x: Split into core and SPI parts Jacob Siverskog
2016-01-22 12:39 ` [PATCH v4 2/3] ASoC: pcm179x: Add I2C interface driver Jacob Siverskog
@ 2016-01-22 12:39 ` Jacob Siverskog
2016-01-22 13:45 ` Michael Trimarchi
3 siblings, 0 replies; 8+ messages in thread
From: Jacob Siverskog @ 2016-01-22 12:39 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown
Cc: Jaroslav Kysela, Takashi Iwai, Michael Trimarchi, Johan Hovold,
alsa-devel, linux-kernel, Jacob Siverskog
According to the PCM179x data sheets sampling frequencies between 10
kHz and 200 kHz are supported. Specify support in the driver.
Tested with PCM1791A.
References:
http://www.ti.com/lit/ds/symlink/pcm1791a.pdf
http://www.ti.com/lit/ds/symlink/pcm1792a.pdf
http://www.ti.com/lit/ds/symlink/pcm1795.pdf
http://www.ti.com/lit/ds/symlink/pcm1796.pdf
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
---
sound/soc/codecs/pcm179x.c | 4 +++-
sound/soc/codecs/pcm179x.h | 4 ----
2 files changed, 3 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/pcm179x.c b/sound/soc/codecs/pcm179x.c
index 8f20f70..06a6657 100644
--- a/sound/soc/codecs/pcm179x.c
+++ b/sound/soc/codecs/pcm179x.c
@@ -187,7 +187,9 @@ static struct snd_soc_dai_driver pcm179x_dai = {
.stream_name = "Playback",
.channels_min = 2,
.channels_max = 2,
- .rates = PCM1792A_RATES,
+ .rates = SNDRV_PCM_RATE_CONTINUOUS,
+ .rate_min = 10000,
+ .rate_max = 200000,
.formats = PCM1792A_FORMATS, },
.ops = &pcm179x_dai_ops,
};
diff --git a/sound/soc/codecs/pcm179x.h b/sound/soc/codecs/pcm179x.h
index c4eea4d..11e3312 100644
--- a/sound/soc/codecs/pcm179x.h
+++ b/sound/soc/codecs/pcm179x.h
@@ -17,10 +17,6 @@
#ifndef __PCM179X_H__
#define __PCM179X_H__
-#define PCM1792A_RATES (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_8000_48000 | \
- SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 | \
- SNDRV_PCM_RATE_192000)
-
#define PCM1792A_FORMATS (SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S24_LE | \
SNDRV_PCM_FMTBIT_S16_LE)
--
2.7.0
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCH v4 0/3] ASoC: pcm179x: Add I2C support, declare support for continuous rates
2016-01-22 12:39 [PATCH v4 0/3] ASoC: pcm179x: Add I2C support, declare support for continuous rates Jacob Siverskog
@ 2016-01-22 13:45 ` Michael Trimarchi
2016-01-22 12:39 ` [PATCH v4 2/3] ASoC: pcm179x: Add I2C interface driver Jacob Siverskog
` (2 subsequent siblings)
3 siblings, 0 replies; 8+ messages in thread
From: Michael Trimarchi @ 2016-01-22 13:45 UTC (permalink / raw)
To: Jacob Siverskog
Cc: Liam Girdwood, Mark Brown, Jaroslav Kysela, Takashi Iwai,
Johan Hovold, alsa-devel, LKML
Hi
On Fri, Jan 22, 2016 at 1:39 PM, Jacob Siverskog
<jacob@teenage.engineering> wrote:
> This series add support for I2C and declares support for continuous
> sample rates.
>
> Please note that this has only been tested using I2C and PCM1791A. I'd
> be grateful if someone can test it with other devices in the PCM179X
> family and/or SPI.
>
> These patches are against linux-next.
>
> [V4]: Move regmap error check to where the regmaps are
> allocated. Minor cosmetic changes.
>
> [V3]: Allocation of private data moved to common code.
>
> [V2]: Fix build issues found by kbuild test robot by adding static
> keyword and proper symbol exports.
>
> Jacob Siverskog (3):
> ASoC: pcm179x: Split into core and SPI parts
> ASoC: pcm179x: Add I2C interface driver
> ASoC: pcm179x: Support continuous rates
>
For me are fine
Acked-by: Michael Trimarchi <michael@amarulasolutions.com>
I will rebase my stuff on top of this
Michael
> .../devicetree/bindings/sound/pcm179x.txt | 11 +++-
> sound/soc/codecs/Kconfig | 20 +++++-
> sound/soc/codecs/Makefile | 4 ++
> sound/soc/codecs/pcm179x-i2c.c | 73 ++++++++++++++++++++++
> sound/soc/codecs/pcm179x-spi.c | 72 +++++++++++++++++++++
> sound/soc/codecs/pcm179x.c | 56 +++++------------
> sound/soc/codecs/pcm179x.h | 9 +--
> 7 files changed, 196 insertions(+), 49 deletions(-)
> create mode 100644 sound/soc/codecs/pcm179x-i2c.c
> create mode 100644 sound/soc/codecs/pcm179x-spi.c
>
> --
> 2.7.0
>
--
| Michael Nazzareno Trimarchi Amarula Solutions BV |
| COO - Founder Cruquiuskade 47 |
| +31(0)851119172 Amsterdam 1018 AM NL |
| [`as] http://www.amarulasolutions.com |
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCH v4 0/3] ASoC: pcm179x: Add I2C support, declare support for continuous rates
@ 2016-01-22 13:45 ` Michael Trimarchi
0 siblings, 0 replies; 8+ messages in thread
From: Michael Trimarchi @ 2016-01-22 13:45 UTC (permalink / raw)
To: Jacob Siverskog
Cc: alsa-devel, LKML, Takashi Iwai, Liam Girdwood, Mark Brown, Johan Hovold
Hi
On Fri, Jan 22, 2016 at 1:39 PM, Jacob Siverskog
<jacob@teenage.engineering> wrote:
> This series add support for I2C and declares support for continuous
> sample rates.
>
> Please note that this has only been tested using I2C and PCM1791A. I'd
> be grateful if someone can test it with other devices in the PCM179X
> family and/or SPI.
>
> These patches are against linux-next.
>
> [V4]: Move regmap error check to where the regmaps are
> allocated. Minor cosmetic changes.
>
> [V3]: Allocation of private data moved to common code.
>
> [V2]: Fix build issues found by kbuild test robot by adding static
> keyword and proper symbol exports.
>
> Jacob Siverskog (3):
> ASoC: pcm179x: Split into core and SPI parts
> ASoC: pcm179x: Add I2C interface driver
> ASoC: pcm179x: Support continuous rates
>
For me are fine
Acked-by: Michael Trimarchi <michael@amarulasolutions.com>
I will rebase my stuff on top of this
Michael
> .../devicetree/bindings/sound/pcm179x.txt | 11 +++-
> sound/soc/codecs/Kconfig | 20 +++++-
> sound/soc/codecs/Makefile | 4 ++
> sound/soc/codecs/pcm179x-i2c.c | 73 ++++++++++++++++++++++
> sound/soc/codecs/pcm179x-spi.c | 72 +++++++++++++++++++++
> sound/soc/codecs/pcm179x.c | 56 +++++------------
> sound/soc/codecs/pcm179x.h | 9 +--
> 7 files changed, 196 insertions(+), 49 deletions(-)
> create mode 100644 sound/soc/codecs/pcm179x-i2c.c
> create mode 100644 sound/soc/codecs/pcm179x-spi.c
>
> --
> 2.7.0
>
--
| Michael Nazzareno Trimarchi Amarula Solutions BV |
| COO - Founder Cruquiuskade 47 |
| +31(0)851119172 Amsterdam 1018 AM NL |
| [`as] http://www.amarulasolutions.com |
^ permalink raw reply [flat|nested] 8+ messages in thread