From: James Liao <jamesjj.liao@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
Mike Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Rob Herring <robh@kernel.org>
Cc: John Crispin <blogic@openwrt.org>,
Sascha Hauer <kernel@pengutronix.de>,
Daniel Kurtz <djkurtz@chromium.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
<srv_heupstream@mediatek.com>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>, <linux-clk@vger.kernel.org>,
Shunli Wang <shunli.wang@mediatek.com>,
James Liao <jamesjj.liao@mediatek.com>
Subject: [PATCH v5 5/6] reset: mediatek: Add MT2701 reset controller dt-binding file
Date: Wed, 27 Jan 2016 15:21:03 +0800 [thread overview]
Message-ID: <1453879264-37915-6-git-send-email-jamesjj.liao@mediatek.com> (raw)
In-Reply-To: <1453879264-37915-1-git-send-email-jamesjj.liao@mediatek.com>
From: Shunli Wang <shunli.wang@mediatek.com>
Dt-binding file about reset controller is used to provide
kinds of definition, which is referenced by dts file and
IC-specified reset controller driver code.
Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Tested-by: John Crispin <blogic@openwrt.org>
---
include/dt-bindings/reset/mt2701-resets.h | 83 +++++++++++++++++++++++++++++++
1 file changed, 83 insertions(+)
create mode 100644 include/dt-bindings/reset/mt2701-resets.h
diff --git a/include/dt-bindings/reset/mt2701-resets.h b/include/dt-bindings/reset/mt2701-resets.h
new file mode 100644
index 0000000..aaf0305
--- /dev/null
+++ b/include/dt-bindings/reset/mt2701-resets.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (c) 2015 MediaTek, Shunli Wang <shunli.wang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT2701
+#define _DT_BINDINGS_RESET_CONTROLLER_MT2701
+
+/* INFRACFG resets */
+#define MT2701_INFRA_EMI_REG_RST 0
+#define MT2701_INFRA_DRAMC0_A0_RST 1
+#define MT2701_INFRA_FHCTL_RST 2
+#define MT2701_INFRA_APCIRQ_EINT_RST 3
+#define MT2701_INFRA_APXGPT_RST 4
+#define MT2701_INFRA_SCPSYS_RST 5
+#define MT2701_INFRA_KP_RST 6
+#define MT2701_INFRA_PMIC_WRAP_RST 7
+#define MT2701_INFRA_MIPI_RST 8
+#define MT2701_INFRA_IRRX_RST 9
+#define MT2701_INFRA_CEC_RST 10
+#define MT2701_INFRA_EMI_RST 32
+#define MT2701_INFRA_DRAMC0_RST 34
+#define MT2701_INFRA_TRNG_RST 37
+#define MT2701_INFRA_SYSIRQ_RST 38
+
+/* PERICFG resets */
+#define MT2701_PERI_UART0_SW_RST 0
+#define MT2701_PERI_UART1_SW_RST 1
+#define MT2701_PERI_UART2_SW_RST 2
+#define MT2701_PERI_UART3_SW_RST 3
+#define MT2701_PERI_GCPU_SW_RST 5
+#define MT2701_PERI_BTIF_SW_RST 6
+#define MT2701_PERI_PWM_SW_RST 8
+#define MT2701_PERI_AUXADC_SW_RST 10
+#define MT2701_PERI_DMA_SW_RST 11
+#define MT2701_PERI_NFI_SW_RST 14
+#define MT2701_PERI_NLI_SW_RST 15
+#define MT2701_PERI_THERM_SW_RST 16
+#define MT2701_PERI_MSDC2_SW_RST 17
+#define MT2701_PERI_MSDC0_SW_RST 19
+#define MT2701_PERI_MSDC1_SW_RST 20
+#define MT2701_PERI_I2C0_SW_RST 22
+#define MT2701_PERI_I2C1_SW_RST 23
+#define MT2701_PERI_I2C2_SW_RST 24
+#define MT2701_PERI_I2C3_SW_RST 25
+#define MT2701_PERI_USB_SW_RST 28
+#define MT2701_PERI_ETH_SW_RST 29
+#define MT2701_PERI_SPI0_SW_RST 33
+
+/* TOPRGU resets */
+#define MT2701_TOPRGU_INFRA_RST 0
+#define MT2701_TOPRGU_MM_RST 1
+#define MT2701_TOPRGU_MFG_RST 2
+#define MT2701_TOPRGU_ETHDMA_RST 3
+#define MT2701_TOPRGU_VDEC_RST 4
+#define MT2701_TOPRGU_VENC_IMG_RST 5
+#define MT2701_TOPRGU_DDRPHY_RST 6
+#define MT2701_TOPRGU_MD_RST 7
+#define MT2701_TOPRGU_INFRA_AO_RST 8
+#define MT2701_TOPRGU_CONN_RST 9
+#define MT2701_TOPRGU_APMIXED_RST 10
+#define MT2701_TOPRGU_HIFSYS_RST 11
+#define MT2701_TOPRGU_CONN_MCU_RST 12
+#define MT2701_TOPRGU_BDP_DISP_RST 13
+
+/* HIFSYS resets */
+#define MT2701_HIFSYS_UHOST0_RST 3
+#define MT2701_HIFSYS_UHOST1_RST 4
+#define MT2701_HIFSYS_UPHY0_RST 21
+#define MT2701_HIFSYS_UPHY1_RST 22
+#define MT2701_HIFSYS_PCIE0_RST 24
+#define MT2701_HIFSYS_PCIE1_RST 25
+#define MT2701_HIFSYS_PCIE2_RST 26
+
+#endif /* _DT_BINDINGS_RESET_CONTROLLER_MT2701 */
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: James Liao <jamesjj.liao@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
Mike Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Rob Herring <robh@kernel.org>
Cc: John Crispin <blogic@openwrt.org>,
Sascha Hauer <kernel@pengutronix.de>,
Daniel Kurtz <djkurtz@chromium.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
srv_heupstream@mediatek.com, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
linux-clk@vger.kernel.org, Shunli Wang <shunli.wang@mediatek.com>,
James Liao <jamesjj.liao@mediatek.com>
Subject: [PATCH v5 5/6] reset: mediatek: Add MT2701 reset controller dt-binding file
Date: Wed, 27 Jan 2016 15:21:03 +0800 [thread overview]
Message-ID: <1453879264-37915-6-git-send-email-jamesjj.liao@mediatek.com> (raw)
In-Reply-To: <1453879264-37915-1-git-send-email-jamesjj.liao@mediatek.com>
From: Shunli Wang <shunli.wang@mediatek.com>
Dt-binding file about reset controller is used to provide
kinds of definition, which is referenced by dts file and
IC-specified reset controller driver code.
Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Tested-by: John Crispin <blogic@openwrt.org>
---
include/dt-bindings/reset/mt2701-resets.h | 83 +++++++++++++++++++++++++++++++
1 file changed, 83 insertions(+)
create mode 100644 include/dt-bindings/reset/mt2701-resets.h
diff --git a/include/dt-bindings/reset/mt2701-resets.h b/include/dt-bindings/reset/mt2701-resets.h
new file mode 100644
index 0000000..aaf0305
--- /dev/null
+++ b/include/dt-bindings/reset/mt2701-resets.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (c) 2015 MediaTek, Shunli Wang <shunli.wang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT2701
+#define _DT_BINDINGS_RESET_CONTROLLER_MT2701
+
+/* INFRACFG resets */
+#define MT2701_INFRA_EMI_REG_RST 0
+#define MT2701_INFRA_DRAMC0_A0_RST 1
+#define MT2701_INFRA_FHCTL_RST 2
+#define MT2701_INFRA_APCIRQ_EINT_RST 3
+#define MT2701_INFRA_APXGPT_RST 4
+#define MT2701_INFRA_SCPSYS_RST 5
+#define MT2701_INFRA_KP_RST 6
+#define MT2701_INFRA_PMIC_WRAP_RST 7
+#define MT2701_INFRA_MIPI_RST 8
+#define MT2701_INFRA_IRRX_RST 9
+#define MT2701_INFRA_CEC_RST 10
+#define MT2701_INFRA_EMI_RST 32
+#define MT2701_INFRA_DRAMC0_RST 34
+#define MT2701_INFRA_TRNG_RST 37
+#define MT2701_INFRA_SYSIRQ_RST 38
+
+/* PERICFG resets */
+#define MT2701_PERI_UART0_SW_RST 0
+#define MT2701_PERI_UART1_SW_RST 1
+#define MT2701_PERI_UART2_SW_RST 2
+#define MT2701_PERI_UART3_SW_RST 3
+#define MT2701_PERI_GCPU_SW_RST 5
+#define MT2701_PERI_BTIF_SW_RST 6
+#define MT2701_PERI_PWM_SW_RST 8
+#define MT2701_PERI_AUXADC_SW_RST 10
+#define MT2701_PERI_DMA_SW_RST 11
+#define MT2701_PERI_NFI_SW_RST 14
+#define MT2701_PERI_NLI_SW_RST 15
+#define MT2701_PERI_THERM_SW_RST 16
+#define MT2701_PERI_MSDC2_SW_RST 17
+#define MT2701_PERI_MSDC0_SW_RST 19
+#define MT2701_PERI_MSDC1_SW_RST 20
+#define MT2701_PERI_I2C0_SW_RST 22
+#define MT2701_PERI_I2C1_SW_RST 23
+#define MT2701_PERI_I2C2_SW_RST 24
+#define MT2701_PERI_I2C3_SW_RST 25
+#define MT2701_PERI_USB_SW_RST 28
+#define MT2701_PERI_ETH_SW_RST 29
+#define MT2701_PERI_SPI0_SW_RST 33
+
+/* TOPRGU resets */
+#define MT2701_TOPRGU_INFRA_RST 0
+#define MT2701_TOPRGU_MM_RST 1
+#define MT2701_TOPRGU_MFG_RST 2
+#define MT2701_TOPRGU_ETHDMA_RST 3
+#define MT2701_TOPRGU_VDEC_RST 4
+#define MT2701_TOPRGU_VENC_IMG_RST 5
+#define MT2701_TOPRGU_DDRPHY_RST 6
+#define MT2701_TOPRGU_MD_RST 7
+#define MT2701_TOPRGU_INFRA_AO_RST 8
+#define MT2701_TOPRGU_CONN_RST 9
+#define MT2701_TOPRGU_APMIXED_RST 10
+#define MT2701_TOPRGU_HIFSYS_RST 11
+#define MT2701_TOPRGU_CONN_MCU_RST 12
+#define MT2701_TOPRGU_BDP_DISP_RST 13
+
+/* HIFSYS resets */
+#define MT2701_HIFSYS_UHOST0_RST 3
+#define MT2701_HIFSYS_UHOST1_RST 4
+#define MT2701_HIFSYS_UPHY0_RST 21
+#define MT2701_HIFSYS_UPHY1_RST 22
+#define MT2701_HIFSYS_PCIE0_RST 24
+#define MT2701_HIFSYS_PCIE1_RST 25
+#define MT2701_HIFSYS_PCIE2_RST 26
+
+#endif /* _DT_BINDINGS_RESET_CONTROLLER_MT2701 */
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: jamesjj.liao@mediatek.com (James Liao)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 5/6] reset: mediatek: Add MT2701 reset controller dt-binding file
Date: Wed, 27 Jan 2016 15:21:03 +0800 [thread overview]
Message-ID: <1453879264-37915-6-git-send-email-jamesjj.liao@mediatek.com> (raw)
In-Reply-To: <1453879264-37915-1-git-send-email-jamesjj.liao@mediatek.com>
From: Shunli Wang <shunli.wang@mediatek.com>
Dt-binding file about reset controller is used to provide
kinds of definition, which is referenced by dts file and
IC-specified reset controller driver code.
Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Tested-by: John Crispin <blogic@openwrt.org>
---
include/dt-bindings/reset/mt2701-resets.h | 83 +++++++++++++++++++++++++++++++
1 file changed, 83 insertions(+)
create mode 100644 include/dt-bindings/reset/mt2701-resets.h
diff --git a/include/dt-bindings/reset/mt2701-resets.h b/include/dt-bindings/reset/mt2701-resets.h
new file mode 100644
index 0000000..aaf0305
--- /dev/null
+++ b/include/dt-bindings/reset/mt2701-resets.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (c) 2015 MediaTek, Shunli Wang <shunli.wang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT2701
+#define _DT_BINDINGS_RESET_CONTROLLER_MT2701
+
+/* INFRACFG resets */
+#define MT2701_INFRA_EMI_REG_RST 0
+#define MT2701_INFRA_DRAMC0_A0_RST 1
+#define MT2701_INFRA_FHCTL_RST 2
+#define MT2701_INFRA_APCIRQ_EINT_RST 3
+#define MT2701_INFRA_APXGPT_RST 4
+#define MT2701_INFRA_SCPSYS_RST 5
+#define MT2701_INFRA_KP_RST 6
+#define MT2701_INFRA_PMIC_WRAP_RST 7
+#define MT2701_INFRA_MIPI_RST 8
+#define MT2701_INFRA_IRRX_RST 9
+#define MT2701_INFRA_CEC_RST 10
+#define MT2701_INFRA_EMI_RST 32
+#define MT2701_INFRA_DRAMC0_RST 34
+#define MT2701_INFRA_TRNG_RST 37
+#define MT2701_INFRA_SYSIRQ_RST 38
+
+/* PERICFG resets */
+#define MT2701_PERI_UART0_SW_RST 0
+#define MT2701_PERI_UART1_SW_RST 1
+#define MT2701_PERI_UART2_SW_RST 2
+#define MT2701_PERI_UART3_SW_RST 3
+#define MT2701_PERI_GCPU_SW_RST 5
+#define MT2701_PERI_BTIF_SW_RST 6
+#define MT2701_PERI_PWM_SW_RST 8
+#define MT2701_PERI_AUXADC_SW_RST 10
+#define MT2701_PERI_DMA_SW_RST 11
+#define MT2701_PERI_NFI_SW_RST 14
+#define MT2701_PERI_NLI_SW_RST 15
+#define MT2701_PERI_THERM_SW_RST 16
+#define MT2701_PERI_MSDC2_SW_RST 17
+#define MT2701_PERI_MSDC0_SW_RST 19
+#define MT2701_PERI_MSDC1_SW_RST 20
+#define MT2701_PERI_I2C0_SW_RST 22
+#define MT2701_PERI_I2C1_SW_RST 23
+#define MT2701_PERI_I2C2_SW_RST 24
+#define MT2701_PERI_I2C3_SW_RST 25
+#define MT2701_PERI_USB_SW_RST 28
+#define MT2701_PERI_ETH_SW_RST 29
+#define MT2701_PERI_SPI0_SW_RST 33
+
+/* TOPRGU resets */
+#define MT2701_TOPRGU_INFRA_RST 0
+#define MT2701_TOPRGU_MM_RST 1
+#define MT2701_TOPRGU_MFG_RST 2
+#define MT2701_TOPRGU_ETHDMA_RST 3
+#define MT2701_TOPRGU_VDEC_RST 4
+#define MT2701_TOPRGU_VENC_IMG_RST 5
+#define MT2701_TOPRGU_DDRPHY_RST 6
+#define MT2701_TOPRGU_MD_RST 7
+#define MT2701_TOPRGU_INFRA_AO_RST 8
+#define MT2701_TOPRGU_CONN_RST 9
+#define MT2701_TOPRGU_APMIXED_RST 10
+#define MT2701_TOPRGU_HIFSYS_RST 11
+#define MT2701_TOPRGU_CONN_MCU_RST 12
+#define MT2701_TOPRGU_BDP_DISP_RST 13
+
+/* HIFSYS resets */
+#define MT2701_HIFSYS_UHOST0_RST 3
+#define MT2701_HIFSYS_UHOST1_RST 4
+#define MT2701_HIFSYS_UPHY0_RST 21
+#define MT2701_HIFSYS_UPHY1_RST 22
+#define MT2701_HIFSYS_PCIE0_RST 24
+#define MT2701_HIFSYS_PCIE1_RST 25
+#define MT2701_HIFSYS_PCIE2_RST 26
+
+#endif /* _DT_BINDINGS_RESET_CONTROLLER_MT2701 */
--
1.9.1
next prev parent reply other threads:[~2016-01-27 7:21 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-27 7:20 [PATCH v5 0/6] Add clock support for Mediatek MT2701 James Liao
2016-01-27 7:20 ` James Liao
2016-01-27 7:20 ` James Liao
2016-01-27 7:20 ` [PATCH v5 1/6] clk: mediatek: Refine the makefile to support multiple clock drivers James Liao
2016-01-27 7:20 ` James Liao
2016-01-27 7:20 ` James Liao
2016-01-27 7:21 ` [PATCH v5 2/6] dt-bindings: ARM: Mediatek: Document bindings for MT2701 James Liao
2016-01-27 7:21 ` James Liao
2016-01-27 7:21 ` James Liao
2016-01-27 7:21 ` [PATCH v5 3/6] clk: mediatek: Add dt-bindings for MT2701 clocks James Liao
2016-01-27 7:21 ` James Liao
2016-01-27 7:21 ` James Liao
2016-01-27 7:21 ` [PATCH v5 4/6] clk: mediatek: Add MT2701 clock support James Liao
2016-01-27 7:21 ` James Liao
2016-01-27 7:21 ` James Liao
2016-01-27 7:21 ` James Liao [this message]
2016-01-27 7:21 ` [PATCH v5 5/6] reset: mediatek: Add MT2701 reset controller dt-binding file James Liao
2016-01-27 7:21 ` James Liao
2016-02-01 8:56 ` Philipp Zabel
2016-02-01 8:56 ` Philipp Zabel
2016-02-02 7:24 ` James Liao
2016-02-02 7:24 ` James Liao
2016-02-02 7:24 ` James Liao
2016-01-27 7:21 ` [PATCH v5 6/6] reset: mediatek: Add MT2701 reset driver James Liao
2016-01-27 7:21 ` James Liao
2016-01-27 7:21 ` James Liao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453879264-37915-6-git-send-email-jamesjj.liao@mediatek.com \
--to=jamesjj.liao@mediatek.com \
--cc=blogic@openwrt.org \
--cc=devicetree@vger.kernel.org \
--cc=djkurtz@chromium.org \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=shunli.wang@mediatek.com \
--cc=srv_heupstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.