[PATCH resend 0/4] of_touchscreen-helpers: Add support for inverted / s

[PATCH resend 0/4] of_touchscreen-helpers: Add support for inverted / s

[Hans de Goede]

Hi Dmitry,

This is a resend of the same set posted a while back, now rebased on
top of v4.5-rc1 as it seems that set has fallen through the cracks.

Regards,

Hans
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH resend 0/4] of_touchscreen-helpers: Add support for inverted / s

[Hans de Goede]

Hi Dmitry,

This is a resend of the same set posted a while back, now rebased on
top of v4.5-rc1 as it seems that set has fallen through the cracks.

Regards,

Hans

[PATCH resend 1/4] of_touchscreen-helpers: Add support for inverted / swapped axis

[Hans de Goede]

Extend touchscreen_parse_properties() with support for the
touchscreen-inverted-x/y and touchscreen-swapped-x-y properties and
add a touchscreen_apply_prop_to_x_y() helper function for adjusting
x and y coordinates to take these properties into account.

This commit also modifies the existing callers of
touchscreen_parse_properties() to pass in NULL for the new third
argument, keeping the existing behavior.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/input/touchscreen/edt-ft5x06.c     |  2 +-
 drivers/input/touchscreen/of_touchscreen.c | 56 +++++++++++++++++++++++++++++-
 drivers/input/touchscreen/pixcir_i2c_ts.c  |  2 +-
 drivers/input/touchscreen/tsc200x-core.c   |  2 +-
 include/linux/input/touchscreen.h          | 16 ++++++++-
 5 files changed, 73 insertions(+), 5 deletions(-)

diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index 0b0f8c1..a97b54a 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -966,7 +966,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 	input_set_abs_params(input, ABS_MT_POSITION_Y,
 			     0, tsdata->num_y * 64 - 1, 0, 0);
 
-	touchscreen_parse_properties(input, true);
+	touchscreen_parse_properties(input, true, NULL);
 
 	error = input_mt_init_slots(input, tsdata->max_support_points,
 				INPUT_MT_DIRECT);
diff --git a/drivers/input/touchscreen/of_touchscreen.c b/drivers/input/touchscreen/of_touchscreen.c
index bb6f2fe..6fd9872 100644
--- a/drivers/input/touchscreen/of_touchscreen.c
+++ b/drivers/input/touchscreen/of_touchscreen.c
@@ -55,12 +55,16 @@ static void touchscreen_set_params(struct input_dev *dev,
  * @input: input device that should be parsed
  * @multitouch: specifies whether parsed properties should be applied to
  *	single-touch or multi-touch axes
+ * @prop: pointer to a struct touchscreen_properties into which to store
+ *	axis swap and invert info for use with touchscreen_report_x_y();
+ *	or NULL
  *
  * This function parses common DT properties for touchscreens and setups the
  * input device accordingly. The function keeps previously set up default
  * values if no value is specified via DT.
  */
-void touchscreen_parse_properties(struct input_dev *input, bool multitouch)
+void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
+				  struct touchscreen_properties *prop)
 {
 	struct device *dev = input->dev.parent;
 	unsigned int axis;
@@ -104,5 +108,55 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch)
 						&fuzz);
 	if (data_present)
 		touchscreen_set_params(input, axis, maximum, fuzz);
+
+	if (!prop)
+		return;
+
+	axis = multitouch ? ABS_MT_POSITION_X : ABS_X;
+
+	prop->max_x = input_abs_get_max(input, axis);
+	prop->max_y = input_abs_get_max(input, axis + 1);
+	prop->invert_x =
+		device_property_read_bool(dev, "touchscreen-inverted-x");
+	prop->invert_y =
+		device_property_read_bool(dev, "touchscreen-inverted-y");
+	prop->swap_x_y =
+		device_property_read_bool(dev, "touchscreen-swapped-x-y");
+
+	if (prop->swap_x_y) {
+		struct input_absinfo tmp_absinfo;
+
+		tmp_absinfo = input->absinfo[axis];
+		input->absinfo[axis] = input->absinfo[axis + 1];
+		input->absinfo[axis + 1] = tmp_absinfo;
+	}
 }
 EXPORT_SYMBOL(touchscreen_parse_properties);
+
+/**
+ * touchscreen_apply_prop_to_x_y - Adjust abs x and y coordinates
+ * @prop: pointer to a struct touchscreen_properties
+ * @x: X coordinate to apply inversion and swapping to
+ * @y: Y coordinate to apply inversion and swapping to
+ *
+ * Adjust the passed in x and y values applying any axis inversion and
+ * swapping requested in the passed in touchscreen_properties.
+ */
+void touchscreen_apply_prop_to_x_y(struct touchscreen_properties *prop,
+				   s16 *x, s16 *y)
+{
+	if (prop->invert_x)
+		*x = prop->max_x - *x;
+
+	if (prop->invert_y)
+		*y = prop->max_y - *y;
+
+	if (prop->swap_x_y) {
+		s16 tmp;
+
+		tmp = *x;
+		*x = *y;
+		*y = tmp;
+	}
+}
+EXPORT_SYMBOL(touchscreen_apply_prop_to_x_y);
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index 09523a3..f58784d 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -515,7 +515,7 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
 	} else {
 		input_set_capability(input, EV_ABS, ABS_MT_POSITION_X);
 		input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y);
-		touchscreen_parse_properties(input, true);
+		touchscreen_parse_properties(input, true, NULL);
 		if (!input_abs_get_max(input, ABS_MT_POSITION_X) ||
 		    !input_abs_get_max(input, ABS_MT_POSITION_Y)) {
 			dev_err(dev, "Touchscreen size is not specified\n");
diff --git a/drivers/input/touchscreen/tsc200x-core.c b/drivers/input/touchscreen/tsc200x-core.c
index 15240c1..26e81d1 100644
--- a/drivers/input/touchscreen/tsc200x-core.c
+++ b/drivers/input/touchscreen/tsc200x-core.c
@@ -559,7 +559,7 @@ int tsc200x_probe(struct device *dev, int irq, __u16 bustype,
 	input_set_abs_params(input_dev, ABS_PRESSURE, 0, max_p, fudge_p, 0);
 
 	if (np)
-		touchscreen_parse_properties(input_dev, false);
+		touchscreen_parse_properties(input_dev, false, NULL);
 
 	input_dev->open = tsc200x_open;
 	input_dev->close = tsc200x_close;
diff --git a/include/linux/input/touchscreen.h b/include/linux/input/touchscreen.h
index c91e137..9e6ba20 100644
--- a/include/linux/input/touchscreen.h
+++ b/include/linux/input/touchscreen.h
@@ -9,8 +9,22 @@
 #ifndef _TOUCHSCREEN_H
 #define _TOUCHSCREEN_H
 
+#include <asm/types.h>
+
 struct input_dev;
 
-void touchscreen_parse_properties(struct input_dev *dev, bool multitouch);
+struct touchscreen_properties {
+	s32 max_x;
+	s32 max_y;
+	bool invert_x;
+	bool invert_y;
+	bool swap_x_y;
+};
+
+void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
+				  struct touchscreen_properties *prop);
+
+void touchscreen_apply_prop_to_x_y(struct touchscreen_properties *prop,
+				   s16 *x, s16 *y);
 
 #endif
-- 
2.5.0

[PATCH resend 1/4] of_touchscreen-helpers: Add support for inverted / swapped axis

[Hans de Goede]

Extend touchscreen_parse_properties() with support for the
touchscreen-inverted-x/y and touchscreen-swapped-x-y properties and
add a touchscreen_apply_prop_to_x_y() helper function for adjusting
x and y coordinates to take these properties into account.

This commit also modifies the existing callers of
touchscreen_parse_properties() to pass in NULL for the new third
argument, keeping the existing behavior.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/input/touchscreen/edt-ft5x06.c     |  2 +-
 drivers/input/touchscreen/of_touchscreen.c | 56 +++++++++++++++++++++++++++++-
 drivers/input/touchscreen/pixcir_i2c_ts.c  |  2 +-
 drivers/input/touchscreen/tsc200x-core.c   |  2 +-
 include/linux/input/touchscreen.h          | 16 ++++++++-
 5 files changed, 73 insertions(+), 5 deletions(-)

diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index 0b0f8c1..a97b54a 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -966,7 +966,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 	input_set_abs_params(input, ABS_MT_POSITION_Y,
 			     0, tsdata->num_y * 64 - 1, 0, 0);
 
-	touchscreen_parse_properties(input, true);
+	touchscreen_parse_properties(input, true, NULL);
 
 	error = input_mt_init_slots(input, tsdata->max_support_points,
 				INPUT_MT_DIRECT);
diff --git a/drivers/input/touchscreen/of_touchscreen.c b/drivers/input/touchscreen/of_touchscreen.c
index bb6f2fe..6fd9872 100644
--- a/drivers/input/touchscreen/of_touchscreen.c
+++ b/drivers/input/touchscreen/of_touchscreen.c
@@ -55,12 +55,16 @@ static void touchscreen_set_params(struct input_dev *dev,
  * @input: input device that should be parsed
  * @multitouch: specifies whether parsed properties should be applied to
  *	single-touch or multi-touch axes
+ * @prop: pointer to a struct touchscreen_properties into which to store
+ *	axis swap and invert info for use with touchscreen_report_x_y();
+ *	or NULL
  *
  * This function parses common DT properties for touchscreens and setups the
  * input device accordingly. The function keeps previously set up default
  * values if no value is specified via DT.
  */
-void touchscreen_parse_properties(struct input_dev *input, bool multitouch)
+void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
+				  struct touchscreen_properties *prop)
 {
 	struct device *dev = input->dev.parent;
 	unsigned int axis;
@@ -104,5 +108,55 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch)
 						&fuzz);
 	if (data_present)
 		touchscreen_set_params(input, axis, maximum, fuzz);
+
+	if (!prop)
+		return;
+
+	axis = multitouch ? ABS_MT_POSITION_X : ABS_X;
+
+	prop->max_x = input_abs_get_max(input, axis);
+	prop->max_y = input_abs_get_max(input, axis + 1);
+	prop->invert_x =
+		device_property_read_bool(dev, "touchscreen-inverted-x");
+	prop->invert_y =
+		device_property_read_bool(dev, "touchscreen-inverted-y");
+	prop->swap_x_y =
+		device_property_read_bool(dev, "touchscreen-swapped-x-y");
+
+	if (prop->swap_x_y) {
+		struct input_absinfo tmp_absinfo;
+
+		tmp_absinfo = input->absinfo[axis];
+		input->absinfo[axis] = input->absinfo[axis + 1];
+		input->absinfo[axis + 1] = tmp_absinfo;
+	}
 }
 EXPORT_SYMBOL(touchscreen_parse_properties);
+
+/**
+ * touchscreen_apply_prop_to_x_y - Adjust abs x and y coordinates
+ * @prop: pointer to a struct touchscreen_properties
+ * @x: X coordinate to apply inversion and swapping to
+ * @y: Y coordinate to apply inversion and swapping to
+ *
+ * Adjust the passed in x and y values applying any axis inversion and
+ * swapping requested in the passed in touchscreen_properties.
+ */
+void touchscreen_apply_prop_to_x_y(struct touchscreen_properties *prop,
+				   s16 *x, s16 *y)
+{
+	if (prop->invert_x)
+		*x = prop->max_x - *x;
+
+	if (prop->invert_y)
+		*y = prop->max_y - *y;
+
+	if (prop->swap_x_y) {
+		s16 tmp;
+
+		tmp = *x;
+		*x = *y;
+		*y = tmp;
+	}
+}
+EXPORT_SYMBOL(touchscreen_apply_prop_to_x_y);
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index 09523a3..f58784d 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -515,7 +515,7 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
 	} else {
 		input_set_capability(input, EV_ABS, ABS_MT_POSITION_X);
 		input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y);
-		touchscreen_parse_properties(input, true);
+		touchscreen_parse_properties(input, true, NULL);
 		if (!input_abs_get_max(input, ABS_MT_POSITION_X) ||
 		    !input_abs_get_max(input, ABS_MT_POSITION_Y)) {
 			dev_err(dev, "Touchscreen size is not specified\n");
diff --git a/drivers/input/touchscreen/tsc200x-core.c b/drivers/input/touchscreen/tsc200x-core.c
index 15240c1..26e81d1 100644
--- a/drivers/input/touchscreen/tsc200x-core.c
+++ b/drivers/input/touchscreen/tsc200x-core.c
@@ -559,7 +559,7 @@ int tsc200x_probe(struct device *dev, int irq, __u16 bustype,
 	input_set_abs_params(input_dev, ABS_PRESSURE, 0, max_p, fudge_p, 0);
 
 	if (np)
-		touchscreen_parse_properties(input_dev, false);
+		touchscreen_parse_properties(input_dev, false, NULL);
 
 	input_dev->open = tsc200x_open;
 	input_dev->close = tsc200x_close;
diff --git a/include/linux/input/touchscreen.h b/include/linux/input/touchscreen.h
index c91e137..9e6ba20 100644
--- a/include/linux/input/touchscreen.h
+++ b/include/linux/input/touchscreen.h
@@ -9,8 +9,22 @@
 #ifndef _TOUCHSCREEN_H
 #define _TOUCHSCREEN_H
 
+#include <asm/types.h>
+
 struct input_dev;
 
-void touchscreen_parse_properties(struct input_dev *dev, bool multitouch);
+struct touchscreen_properties {
+	s32 max_x;
+	s32 max_y;
+	bool invert_x;
+	bool invert_y;
+	bool swap_x_y;
+};
+
+void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
+				  struct touchscreen_properties *prop);
+
+void touchscreen_apply_prop_to_x_y(struct touchscreen_properties *prop,
+				   s16 *x, s16 *y);
 
 #endif
-- 
2.5.0

Re: [PATCH resend 1/4] of_touchscreen-helpers: Add support for inverted / swapped axis

[Dmitry Torokhov]

Hi Hans,

On Wed, Jan 27, 2016 at 07:25:21PM +0100, Hans de Goede wrote:
> Extend touchscreen_parse_properties() with support for the
> touchscreen-inverted-x/y and touchscreen-swapped-x-y properties and
> add a touchscreen_apply_prop_to_x_y() helper function for adjusting
> x and y coordinates to take these properties into account.
> 
> This commit also modifies the existing callers of
> touchscreen_parse_properties() to pass in NULL for the new third
> argument, keeping the existing behavior.

Thank you for re-sending the patches. I was wondering if we should add
the transformation flags directly to the input devices and perform
transformation in input core... Probably won't going to work well unless
we start defining order in which we send events to the core.

> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
>  drivers/input/touchscreen/edt-ft5x06.c     |  2 +-
>  drivers/input/touchscreen/of_touchscreen.c | 56 +++++++++++++++++++++++++++++-
>  drivers/input/touchscreen/pixcir_i2c_ts.c  |  2 +-
>  drivers/input/touchscreen/tsc200x-core.c   |  2 +-
>  include/linux/input/touchscreen.h          | 16 ++++++++-
>  5 files changed, 73 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
> index 0b0f8c1..a97b54a 100644
> --- a/drivers/input/touchscreen/edt-ft5x06.c
> +++ b/drivers/input/touchscreen/edt-ft5x06.c
> @@ -966,7 +966,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
>  	input_set_abs_params(input, ABS_MT_POSITION_Y,
>  			     0, tsdata->num_y * 64 - 1, 0, 0);
>  
> -	touchscreen_parse_properties(input, true);
> +	touchscreen_parse_properties(input, true, NULL);
>  
>  	error = input_mt_init_slots(input, tsdata->max_support_points,
>  				INPUT_MT_DIRECT);
> diff --git a/drivers/input/touchscreen/of_touchscreen.c b/drivers/input/touchscreen/of_touchscreen.c
> index bb6f2fe..6fd9872 100644
> --- a/drivers/input/touchscreen/of_touchscreen.c
> +++ b/drivers/input/touchscreen/of_touchscreen.c
> @@ -55,12 +55,16 @@ static void touchscreen_set_params(struct input_dev *dev,
>   * @input: input device that should be parsed
>   * @multitouch: specifies whether parsed properties should be applied to
>   *	single-touch or multi-touch axes
> + * @prop: pointer to a struct touchscreen_properties into which to store
> + *	axis swap and invert info for use with touchscreen_report_x_y();
> + *	or NULL
>   *
>   * This function parses common DT properties for touchscreens and setups the
>   * input device accordingly. The function keeps previously set up default
>   * values if no value is specified via DT.
>   */
> -void touchscreen_parse_properties(struct input_dev *input, bool multitouch)
> +void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
> +				  struct touchscreen_properties *prop)
>  {
>  	struct device *dev = input->dev.parent;
>  	unsigned int axis;
> @@ -104,5 +108,55 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch)
>  						&fuzz);
>  	if (data_present)
>  		touchscreen_set_params(input, axis, maximum, fuzz);
> +
> +	if (!prop)
> +		return;
> +
> +	axis = multitouch ? ABS_MT_POSITION_X : ABS_X;
> +
> +	prop->max_x = input_abs_get_max(input, axis);
> +	prop->max_y = input_abs_get_max(input, axis + 1);
> +	prop->invert_x =
> +		device_property_read_bool(dev, "touchscreen-inverted-x");
> +	prop->invert_y =
> +		device_property_read_bool(dev, "touchscreen-inverted-y");
> +	prop->swap_x_y =
> +		device_property_read_bool(dev, "touchscreen-swapped-x-y");
> +
> +	if (prop->swap_x_y) {
> +		struct input_absinfo tmp_absinfo;
> +
> +		tmp_absinfo = input->absinfo[axis];
> +		input->absinfo[axis] = input->absinfo[axis + 1];
> +		input->absinfo[axis + 1] = tmp_absinfo;
> +	}
>  }
>  EXPORT_SYMBOL(touchscreen_parse_properties);
> +
> +/**
> + * touchscreen_apply_prop_to_x_y - Adjust abs x and y coordinates
> + * @prop: pointer to a struct touchscreen_properties
> + * @x: X coordinate to apply inversion and swapping to
> + * @y: Y coordinate to apply inversion and swapping to
> + *
> + * Adjust the passed in x and y values applying any axis inversion and
> + * swapping requested in the passed in touchscreen_properties.
> + */
> +void touchscreen_apply_prop_to_x_y(struct touchscreen_properties *prop,
> +				   s16 *x, s16 *y)

why s16?

> +{
> +	if (prop->invert_x)
> +		*x = prop->max_x - *x;
> +
> +	if (prop->invert_y)
> +		*y = prop->max_y - *y;
> +
> +	if (prop->swap_x_y) {
> +		s16 tmp;
> +
> +		tmp = *x;
> +		*x = *y;
> +		*y = tmp;

		swap(*x, *y);

> +	}
> +}
> +EXPORT_SYMBOL(touchscreen_apply_prop_to_x_y);
> diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
> index 09523a3..f58784d 100644
> --- a/drivers/input/touchscreen/pixcir_i2c_ts.c
> +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
> @@ -515,7 +515,7 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
>  	} else {
>  		input_set_capability(input, EV_ABS, ABS_MT_POSITION_X);
>  		input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y);
> -		touchscreen_parse_properties(input, true);
> +		touchscreen_parse_properties(input, true, NULL);
>  		if (!input_abs_get_max(input, ABS_MT_POSITION_X) ||
>  		    !input_abs_get_max(input, ABS_MT_POSITION_Y)) {
>  			dev_err(dev, "Touchscreen size is not specified\n");
> diff --git a/drivers/input/touchscreen/tsc200x-core.c b/drivers/input/touchscreen/tsc200x-core.c
> index 15240c1..26e81d1 100644
> --- a/drivers/input/touchscreen/tsc200x-core.c
> +++ b/drivers/input/touchscreen/tsc200x-core.c
> @@ -559,7 +559,7 @@ int tsc200x_probe(struct device *dev, int irq, __u16 bustype,
>  	input_set_abs_params(input_dev, ABS_PRESSURE, 0, max_p, fudge_p, 0);
>  
>  	if (np)
> -		touchscreen_parse_properties(input_dev, false);
> +		touchscreen_parse_properties(input_dev, false, NULL);
>  
>  	input_dev->open = tsc200x_open;
>  	input_dev->close = tsc200x_close;
> diff --git a/include/linux/input/touchscreen.h b/include/linux/input/touchscreen.h
> index c91e137..9e6ba20 100644
> --- a/include/linux/input/touchscreen.h
> +++ b/include/linux/input/touchscreen.h
> @@ -9,8 +9,22 @@
>  #ifndef _TOUCHSCREEN_H
>  #define _TOUCHSCREEN_H
>  
> +#include <asm/types.h>

If you are trying to add this to have s32 typedefs then I think it is
wrong one.

> +
>  struct input_dev;
>  
> -void touchscreen_parse_properties(struct input_dev *dev, bool multitouch);
> +struct touchscreen_properties {
> +	s32 max_x;
> +	s32 max_y;
> +	bool invert_x;
> +	bool invert_y;
> +	bool swap_x_y;
> +};
> +
> +void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
> +				  struct touchscreen_properties *prop);
> +
> +void touchscreen_apply_prop_to_x_y(struct touchscreen_properties *prop,
> +				   s16 *x, s16 *y);
>  
>  #endif
> -- 
> 2.5.0
> 

Thanks.

-- 
Dmitry

[PATCH resend 1/4] of_touchscreen-helpers: Add support for inverted / swapped axis

[Dmitry Torokhov]

Hi Hans,

On Wed, Jan 27, 2016 at 07:25:21PM +0100, Hans de Goede wrote:
> Extend touchscreen_parse_properties() with support for the
> touchscreen-inverted-x/y and touchscreen-swapped-x-y properties and
> add a touchscreen_apply_prop_to_x_y() helper function for adjusting
> x and y coordinates to take these properties into account.
> 
> This commit also modifies the existing callers of
> touchscreen_parse_properties() to pass in NULL for the new third
> argument, keeping the existing behavior.

Thank you for re-sending the patches. I was wondering if we should add
the transformation flags directly to the input devices and perform
transformation in input core... Probably won't going to work well unless
we start defining order in which we send events to the core.

> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
>  drivers/input/touchscreen/edt-ft5x06.c     |  2 +-
>  drivers/input/touchscreen/of_touchscreen.c | 56 +++++++++++++++++++++++++++++-
>  drivers/input/touchscreen/pixcir_i2c_ts.c  |  2 +-
>  drivers/input/touchscreen/tsc200x-core.c   |  2 +-
>  include/linux/input/touchscreen.h          | 16 ++++++++-
>  5 files changed, 73 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
> index 0b0f8c1..a97b54a 100644
> --- a/drivers/input/touchscreen/edt-ft5x06.c
> +++ b/drivers/input/touchscreen/edt-ft5x06.c
> @@ -966,7 +966,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
>  	input_set_abs_params(input, ABS_MT_POSITION_Y,
>  			     0, tsdata->num_y * 64 - 1, 0, 0);
>  
> -	touchscreen_parse_properties(input, true);
> +	touchscreen_parse_properties(input, true, NULL);
>  
>  	error = input_mt_init_slots(input, tsdata->max_support_points,
>  				INPUT_MT_DIRECT);
> diff --git a/drivers/input/touchscreen/of_touchscreen.c b/drivers/input/touchscreen/of_touchscreen.c
> index bb6f2fe..6fd9872 100644
> --- a/drivers/input/touchscreen/of_touchscreen.c
> +++ b/drivers/input/touchscreen/of_touchscreen.c
> @@ -55,12 +55,16 @@ static void touchscreen_set_params(struct input_dev *dev,
>   * @input: input device that should be parsed
>   * @multitouch: specifies whether parsed properties should be applied to
>   *	single-touch or multi-touch axes
> + * @prop: pointer to a struct touchscreen_properties into which to store
> + *	axis swap and invert info for use with touchscreen_report_x_y();
> + *	or NULL
>   *
>   * This function parses common DT properties for touchscreens and setups the
>   * input device accordingly. The function keeps previously set up default
>   * values if no value is specified via DT.
>   */
> -void touchscreen_parse_properties(struct input_dev *input, bool multitouch)
> +void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
> +				  struct touchscreen_properties *prop)
>  {
>  	struct device *dev = input->dev.parent;
>  	unsigned int axis;
> @@ -104,5 +108,55 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch)
>  						&fuzz);
>  	if (data_present)
>  		touchscreen_set_params(input, axis, maximum, fuzz);
> +
> +	if (!prop)
> +		return;
> +
> +	axis = multitouch ? ABS_MT_POSITION_X : ABS_X;
> +
> +	prop->max_x = input_abs_get_max(input, axis);
> +	prop->max_y = input_abs_get_max(input, axis + 1);
> +	prop->invert_x =
> +		device_property_read_bool(dev, "touchscreen-inverted-x");
> +	prop->invert_y =
> +		device_property_read_bool(dev, "touchscreen-inverted-y");
> +	prop->swap_x_y =
> +		device_property_read_bool(dev, "touchscreen-swapped-x-y");
> +
> +	if (prop->swap_x_y) {
> +		struct input_absinfo tmp_absinfo;
> +
> +		tmp_absinfo = input->absinfo[axis];
> +		input->absinfo[axis] = input->absinfo[axis + 1];
> +		input->absinfo[axis + 1] = tmp_absinfo;
> +	}
>  }
>  EXPORT_SYMBOL(touchscreen_parse_properties);
> +
> +/**
> + * touchscreen_apply_prop_to_x_y - Adjust abs x and y coordinates
> + * @prop: pointer to a struct touchscreen_properties
> + * @x: X coordinate to apply inversion and swapping to
> + * @y: Y coordinate to apply inversion and swapping to
> + *
> + * Adjust the passed in x and y values applying any axis inversion and
> + * swapping requested in the passed in touchscreen_properties.
> + */
> +void touchscreen_apply_prop_to_x_y(struct touchscreen_properties *prop,
> +				   s16 *x, s16 *y)

why s16?

> +{
> +	if (prop->invert_x)
> +		*x = prop->max_x - *x;
> +
> +	if (prop->invert_y)
> +		*y = prop->max_y - *y;
> +
> +	if (prop->swap_x_y) {
> +		s16 tmp;
> +
> +		tmp = *x;
> +		*x = *y;
> +		*y = tmp;

		swap(*x, *y);

> +	}
> +}
> +EXPORT_SYMBOL(touchscreen_apply_prop_to_x_y);
> diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
> index 09523a3..f58784d 100644
> --- a/drivers/input/touchscreen/pixcir_i2c_ts.c
> +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
> @@ -515,7 +515,7 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
>  	} else {
>  		input_set_capability(input, EV_ABS, ABS_MT_POSITION_X);
>  		input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y);
> -		touchscreen_parse_properties(input, true);
> +		touchscreen_parse_properties(input, true, NULL);
>  		if (!input_abs_get_max(input, ABS_MT_POSITION_X) ||
>  		    !input_abs_get_max(input, ABS_MT_POSITION_Y)) {
>  			dev_err(dev, "Touchscreen size is not specified\n");
> diff --git a/drivers/input/touchscreen/tsc200x-core.c b/drivers/input/touchscreen/tsc200x-core.c
> index 15240c1..26e81d1 100644
> --- a/drivers/input/touchscreen/tsc200x-core.c
> +++ b/drivers/input/touchscreen/tsc200x-core.c
> @@ -559,7 +559,7 @@ int tsc200x_probe(struct device *dev, int irq, __u16 bustype,
>  	input_set_abs_params(input_dev, ABS_PRESSURE, 0, max_p, fudge_p, 0);
>  
>  	if (np)
> -		touchscreen_parse_properties(input_dev, false);
> +		touchscreen_parse_properties(input_dev, false, NULL);
>  
>  	input_dev->open = tsc200x_open;
>  	input_dev->close = tsc200x_close;
> diff --git a/include/linux/input/touchscreen.h b/include/linux/input/touchscreen.h
> index c91e137..9e6ba20 100644
> --- a/include/linux/input/touchscreen.h
> +++ b/include/linux/input/touchscreen.h
> @@ -9,8 +9,22 @@
>  #ifndef _TOUCHSCREEN_H
>  #define _TOUCHSCREEN_H
>  
> +#include <asm/types.h>

If you are trying to add this to have s32 typedefs then I think it is
wrong one.

> +
>  struct input_dev;
>  
> -void touchscreen_parse_properties(struct input_dev *dev, bool multitouch);
> +struct touchscreen_properties {
> +	s32 max_x;
> +	s32 max_y;
> +	bool invert_x;
> +	bool invert_y;
> +	bool swap_x_y;
> +};
> +
> +void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
> +				  struct touchscreen_properties *prop);
> +
> +void touchscreen_apply_prop_to_x_y(struct touchscreen_properties *prop,
> +				   s16 *x, s16 *y);
>  
>  #endif
> -- 
> 2.5.0
> 

Thanks.

-- 
Dmitry

Re: [PATCH resend 1/4] of_touchscreen-helpers: Add support for inverted / swapped axis

[Hans de Goede]

Hi,

On 27-01-16 23:45, Dmitry Torokhov wrote:
> Hi Hans,
>
> On Wed, Jan 27, 2016 at 07:25:21PM +0100, Hans de Goede wrote:
>> Extend touchscreen_parse_properties() with support for the
>> touchscreen-inverted-x/y and touchscreen-swapped-x-y properties and
>> add a touchscreen_apply_prop_to_x_y() helper function for adjusting
>> x and y coordinates to take these properties into account.
>>
>> This commit also modifies the existing callers of
>> touchscreen_parse_properties() to pass in NULL for the new third
>> argument, keeping the existing behavior.
>
> Thank you for re-sending the patches. I was wondering if we should add
> the transformation flags directly to the input devices and perform
> transformation in input core... Probably won't going to work well unless
> we start defining order in which we send events to the core.

Interesting that you mention this, I had the same thought. The problem
with doing this in the core is that we rely on the order of applying
invert then axis swapping specified in the dt binding, so it seems best
to keep this in the of helpers.

>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>>   drivers/input/touchscreen/edt-ft5x06.c     |  2 +-
>>   drivers/input/touchscreen/of_touchscreen.c | 56 +++++++++++++++++++++++++++++-
>>   drivers/input/touchscreen/pixcir_i2c_ts.c  |  2 +-
>>   drivers/input/touchscreen/tsc200x-core.c   |  2 +-
>>   include/linux/input/touchscreen.h          | 16 ++++++++-
>>   5 files changed, 73 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
>> index 0b0f8c1..a97b54a 100644
>> --- a/drivers/input/touchscreen/edt-ft5x06.c
>> +++ b/drivers/input/touchscreen/edt-ft5x06.c
>> @@ -966,7 +966,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
>>   	input_set_abs_params(input, ABS_MT_POSITION_Y,
>>   			     0, tsdata->num_y * 64 - 1, 0, 0);
>>
>> -	touchscreen_parse_properties(input, true);
>> +	touchscreen_parse_properties(input, true, NULL);
>>
>>   	error = input_mt_init_slots(input, tsdata->max_support_points,
>>   				INPUT_MT_DIRECT);
>> diff --git a/drivers/input/touchscreen/of_touchscreen.c b/drivers/input/touchscreen/of_touchscreen.c
>> index bb6f2fe..6fd9872 100644
>> --- a/drivers/input/touchscreen/of_touchscreen.c
>> +++ b/drivers/input/touchscreen/of_touchscreen.c
>> @@ -55,12 +55,16 @@ static void touchscreen_set_params(struct input_dev *dev,
>>    * @input: input device that should be parsed
>>    * @multitouch: specifies whether parsed properties should be applied to
>>    *	single-touch or multi-touch axes
>> + * @prop: pointer to a struct touchscreen_properties into which to store
>> + *	axis swap and invert info for use with touchscreen_report_x_y();
>> + *	or NULL
>>    *
>>    * This function parses common DT properties for touchscreens and setups the
>>    * input device accordingly. The function keeps previously set up default
>>    * values if no value is specified via DT.
>>    */
>> -void touchscreen_parse_properties(struct input_dev *input, bool multitouch)
>> +void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
>> +				  struct touchscreen_properties *prop)
>>   {
>>   	struct device *dev = input->dev.parent;
>>   	unsigned int axis;
>> @@ -104,5 +108,55 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch)
>>   						&fuzz);
>>   	if (data_present)
>>   		touchscreen_set_params(input, axis, maximum, fuzz);
>> +
>> +	if (!prop)
>> +		return;
>> +
>> +	axis = multitouch ? ABS_MT_POSITION_X : ABS_X;
>> +
>> +	prop->max_x = input_abs_get_max(input, axis);
>> +	prop->max_y = input_abs_get_max(input, axis + 1);
>> +	prop->invert_x =
>> +		device_property_read_bool(dev, "touchscreen-inverted-x");
>> +	prop->invert_y =
>> +		device_property_read_bool(dev, "touchscreen-inverted-y");
>> +	prop->swap_x_y =
>> +		device_property_read_bool(dev, "touchscreen-swapped-x-y");
>> +
>> +	if (prop->swap_x_y) {
>> +		struct input_absinfo tmp_absinfo;
>> +
>> +		tmp_absinfo = input->absinfo[axis];
>> +		input->absinfo[axis] = input->absinfo[axis + 1];
>> +		input->absinfo[axis + 1] = tmp_absinfo;
>> +	}
>>   }
>>   EXPORT_SYMBOL(touchscreen_parse_properties);
>> +
>> +/**
>> + * touchscreen_apply_prop_to_x_y - Adjust abs x and y coordinates
>> + * @prop: pointer to a struct touchscreen_properties
>> + * @x: X coordinate to apply inversion and swapping to
>> + * @y: Y coordinate to apply inversion and swapping to
>> + *
>> + * Adjust the passed in x and y values applying any axis inversion and
>> + * swapping requested in the passed in touchscreen_properties.
>> + */
>> +void touchscreen_apply_prop_to_x_y(struct touchscreen_properties *prop,
>> +				   s16 *x, s16 *y)
>
> why s16?

To match the type used in struct input_mt_pos, so that this can be
called directly on a struct input_mt_pos (something which I ended
up not doing in all of the followup patches, but probably still
useful for the future).

>> +{
>> +	if (prop->invert_x)
>> +		*x = prop->max_x - *x;
>> +
>> +	if (prop->invert_y)
>> +		*y = prop->max_y - *y;
>> +
>> +	if (prop->swap_x_y) {
>> +		s16 tmp;
>> +
>> +		tmp = *x;
>> +		*x = *y;
>> +		*y = tmp;
>
> 		swap(*x, *y);
>
>> +	}
>> +}
>> +EXPORT_SYMBOL(touchscreen_apply_prop_to_x_y);
>> diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
>> index 09523a3..f58784d 100644
>> --- a/drivers/input/touchscreen/pixcir_i2c_ts.c
>> +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
>> @@ -515,7 +515,7 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
>>   	} else {
>>   		input_set_capability(input, EV_ABS, ABS_MT_POSITION_X);
>>   		input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y);
>> -		touchscreen_parse_properties(input, true);
>> +		touchscreen_parse_properties(input, true, NULL);
>>   		if (!input_abs_get_max(input, ABS_MT_POSITION_X) ||
>>   		    !input_abs_get_max(input, ABS_MT_POSITION_Y)) {
>>   			dev_err(dev, "Touchscreen size is not specified\n");
>> diff --git a/drivers/input/touchscreen/tsc200x-core.c b/drivers/input/touchscreen/tsc200x-core.c
>> index 15240c1..26e81d1 100644
>> --- a/drivers/input/touchscreen/tsc200x-core.c
>> +++ b/drivers/input/touchscreen/tsc200x-core.c
>> @@ -559,7 +559,7 @@ int tsc200x_probe(struct device *dev, int irq, __u16 bustype,
>>   	input_set_abs_params(input_dev, ABS_PRESSURE, 0, max_p, fudge_p, 0);
>>
>>   	if (np)
>> -		touchscreen_parse_properties(input_dev, false);
>> +		touchscreen_parse_properties(input_dev, false, NULL);
>>
>>   	input_dev->open = tsc200x_open;
>>   	input_dev->close = tsc200x_close;
>> diff --git a/include/linux/input/touchscreen.h b/include/linux/input/touchscreen.h
>> index c91e137..9e6ba20 100644
>> --- a/include/linux/input/touchscreen.h
>> +++ b/include/linux/input/touchscreen.h
>> @@ -9,8 +9,22 @@
>>   #ifndef _TOUCHSCREEN_H
>>   #define _TOUCHSCREEN_H
>>
>> +#include <asm/types.h>
>
> If you are trying to add this to have s32 typedefs

Yes that is why it is there.

> then I think it is
> wrong one.

Looks like your right, do you know what the right one is ?

>
>> +
>>   struct input_dev;
>>
>> -void touchscreen_parse_properties(struct input_dev *dev, bool multitouch);
>> +struct touchscreen_properties {
>> +	s32 max_x;
>> +	s32 max_y;
>> +	bool invert_x;
>> +	bool invert_y;
>> +	bool swap_x_y;
>> +};
>> +
>> +void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
>> +				  struct touchscreen_properties *prop);
>> +
>> +void touchscreen_apply_prop_to_x_y(struct touchscreen_properties *prop,
>> +				   s16 *x, s16 *y);
>>
>>   #endif
>> --
>> 2.5.0
>>
>
> Thanks.
>

Regards,

Hans

[PATCH resend 1/4] of_touchscreen-helpers: Add support for inverted / swapped axis

[Hans de Goede]

Hi,

On 27-01-16 23:45, Dmitry Torokhov wrote:
> Hi Hans,
>
> On Wed, Jan 27, 2016 at 07:25:21PM +0100, Hans de Goede wrote:
>> Extend touchscreen_parse_properties() with support for the
>> touchscreen-inverted-x/y and touchscreen-swapped-x-y properties and
>> add a touchscreen_apply_prop_to_x_y() helper function for adjusting
>> x and y coordinates to take these properties into account.
>>
>> This commit also modifies the existing callers of
>> touchscreen_parse_properties() to pass in NULL for the new third
>> argument, keeping the existing behavior.
>
> Thank you for re-sending the patches. I was wondering if we should add
> the transformation flags directly to the input devices and perform
> transformation in input core... Probably won't going to work well unless
> we start defining order in which we send events to the core.

Interesting that you mention this, I had the same thought. The problem
with doing this in the core is that we rely on the order of applying
invert then axis swapping specified in the dt binding, so it seems best
to keep this in the of helpers.

>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>>   drivers/input/touchscreen/edt-ft5x06.c     |  2 +-
>>   drivers/input/touchscreen/of_touchscreen.c | 56 +++++++++++++++++++++++++++++-
>>   drivers/input/touchscreen/pixcir_i2c_ts.c  |  2 +-
>>   drivers/input/touchscreen/tsc200x-core.c   |  2 +-
>>   include/linux/input/touchscreen.h          | 16 ++++++++-
>>   5 files changed, 73 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
>> index 0b0f8c1..a97b54a 100644
>> --- a/drivers/input/touchscreen/edt-ft5x06.c
>> +++ b/drivers/input/touchscreen/edt-ft5x06.c
>> @@ -966,7 +966,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
>>   	input_set_abs_params(input, ABS_MT_POSITION_Y,
>>   			     0, tsdata->num_y * 64 - 1, 0, 0);
>>
>> -	touchscreen_parse_properties(input, true);
>> +	touchscreen_parse_properties(input, true, NULL);
>>
>>   	error = input_mt_init_slots(input, tsdata->max_support_points,
>>   				INPUT_MT_DIRECT);
>> diff --git a/drivers/input/touchscreen/of_touchscreen.c b/drivers/input/touchscreen/of_touchscreen.c
>> index bb6f2fe..6fd9872 100644
>> --- a/drivers/input/touchscreen/of_touchscreen.c
>> +++ b/drivers/input/touchscreen/of_touchscreen.c
>> @@ -55,12 +55,16 @@ static void touchscreen_set_params(struct input_dev *dev,
>>    * @input: input device that should be parsed
>>    * @multitouch: specifies whether parsed properties should be applied to
>>    *	single-touch or multi-touch axes
>> + * @prop: pointer to a struct touchscreen_properties into which to store
>> + *	axis swap and invert info for use with touchscreen_report_x_y();
>> + *	or NULL
>>    *
>>    * This function parses common DT properties for touchscreens and setups the
>>    * input device accordingly. The function keeps previously set up default
>>    * values if no value is specified via DT.
>>    */
>> -void touchscreen_parse_properties(struct input_dev *input, bool multitouch)
>> +void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
>> +				  struct touchscreen_properties *prop)
>>   {
>>   	struct device *dev = input->dev.parent;
>>   	unsigned int axis;
>> @@ -104,5 +108,55 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch)
>>   						&fuzz);
>>   	if (data_present)
>>   		touchscreen_set_params(input, axis, maximum, fuzz);
>> +
>> +	if (!prop)
>> +		return;
>> +
>> +	axis = multitouch ? ABS_MT_POSITION_X : ABS_X;
>> +
>> +	prop->max_x = input_abs_get_max(input, axis);
>> +	prop->max_y = input_abs_get_max(input, axis + 1);
>> +	prop->invert_x =
>> +		device_property_read_bool(dev, "touchscreen-inverted-x");
>> +	prop->invert_y =
>> +		device_property_read_bool(dev, "touchscreen-inverted-y");
>> +	prop->swap_x_y =
>> +		device_property_read_bool(dev, "touchscreen-swapped-x-y");
>> +
>> +	if (prop->swap_x_y) {
>> +		struct input_absinfo tmp_absinfo;
>> +
>> +		tmp_absinfo = input->absinfo[axis];
>> +		input->absinfo[axis] = input->absinfo[axis + 1];
>> +		input->absinfo[axis + 1] = tmp_absinfo;
>> +	}
>>   }
>>   EXPORT_SYMBOL(touchscreen_parse_properties);
>> +
>> +/**
>> + * touchscreen_apply_prop_to_x_y - Adjust abs x and y coordinates
>> + * @prop: pointer to a struct touchscreen_properties
>> + * @x: X coordinate to apply inversion and swapping to
>> + * @y: Y coordinate to apply inversion and swapping to
>> + *
>> + * Adjust the passed in x and y values applying any axis inversion and
>> + * swapping requested in the passed in touchscreen_properties.
>> + */
>> +void touchscreen_apply_prop_to_x_y(struct touchscreen_properties *prop,
>> +				   s16 *x, s16 *y)
>
> why s16?

To match the type used in struct input_mt_pos, so that this can be
called directly on a struct input_mt_pos (something which I ended
up not doing in all of the followup patches, but probably still
useful for the future).

>> +{
>> +	if (prop->invert_x)
>> +		*x = prop->max_x - *x;
>> +
>> +	if (prop->invert_y)
>> +		*y = prop->max_y - *y;
>> +
>> +	if (prop->swap_x_y) {
>> +		s16 tmp;
>> +
>> +		tmp = *x;
>> +		*x = *y;
>> +		*y = tmp;
>
> 		swap(*x, *y);
>
>> +	}
>> +}
>> +EXPORT_SYMBOL(touchscreen_apply_prop_to_x_y);
>> diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
>> index 09523a3..f58784d 100644
>> --- a/drivers/input/touchscreen/pixcir_i2c_ts.c
>> +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
>> @@ -515,7 +515,7 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
>>   	} else {
>>   		input_set_capability(input, EV_ABS, ABS_MT_POSITION_X);
>>   		input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y);
>> -		touchscreen_parse_properties(input, true);
>> +		touchscreen_parse_properties(input, true, NULL);
>>   		if (!input_abs_get_max(input, ABS_MT_POSITION_X) ||
>>   		    !input_abs_get_max(input, ABS_MT_POSITION_Y)) {
>>   			dev_err(dev, "Touchscreen size is not specified\n");
>> diff --git a/drivers/input/touchscreen/tsc200x-core.c b/drivers/input/touchscreen/tsc200x-core.c
>> index 15240c1..26e81d1 100644
>> --- a/drivers/input/touchscreen/tsc200x-core.c
>> +++ b/drivers/input/touchscreen/tsc200x-core.c
>> @@ -559,7 +559,7 @@ int tsc200x_probe(struct device *dev, int irq, __u16 bustype,
>>   	input_set_abs_params(input_dev, ABS_PRESSURE, 0, max_p, fudge_p, 0);
>>
>>   	if (np)
>> -		touchscreen_parse_properties(input_dev, false);
>> +		touchscreen_parse_properties(input_dev, false, NULL);
>>
>>   	input_dev->open = tsc200x_open;
>>   	input_dev->close = tsc200x_close;
>> diff --git a/include/linux/input/touchscreen.h b/include/linux/input/touchscreen.h
>> index c91e137..9e6ba20 100644
>> --- a/include/linux/input/touchscreen.h
>> +++ b/include/linux/input/touchscreen.h
>> @@ -9,8 +9,22 @@
>>   #ifndef _TOUCHSCREEN_H
>>   #define _TOUCHSCREEN_H
>>
>> +#include <asm/types.h>
>
> If you are trying to add this to have s32 typedefs

Yes that is why it is there.

> then I think it is
> wrong one.

Looks like your right, do you know what the right one is ?

>
>> +
>>   struct input_dev;
>>
>> -void touchscreen_parse_properties(struct input_dev *dev, bool multitouch);
>> +struct touchscreen_properties {
>> +	s32 max_x;
>> +	s32 max_y;
>> +	bool invert_x;
>> +	bool invert_y;
>> +	bool swap_x_y;
>> +};
>> +
>> +void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
>> +				  struct touchscreen_properties *prop);
>> +
>> +void touchscreen_apply_prop_to_x_y(struct touchscreen_properties *prop,
>> +				   s16 *x, s16 *y);
>>
>>   #endif
>> --
>> 2.5.0
>>
>
> Thanks.
>

Regards,

Hans

[PATCH resend 2/4] touchscreen: ft5x06: Add support for axis inversion / swapping

[Hans de Goede]

Add support for axis inversion / swapping using the new
touchscreen_parse_properties and touchscreen_apply_prop_to_x_y
functionality.

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 drivers/input/touchscreen/edt-ft5x06.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index a97b54a..6fe8d51 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -86,6 +86,7 @@ struct edt_reg_addr {
 struct edt_ft5x06_ts_data {
 	struct i2c_client *client;
 	struct input_dev *input;
+	struct touchscreen_properties prop;
 	u16 num_x;
 	u16 num_y;
 
@@ -173,7 +174,8 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id)
 	struct device *dev = &tsdata->client->dev;
 	u8 cmd;
 	u8 rdbuf[63];
-	int i, type, x, y, id;
+	s16 x, y;
+	int i, type, id;
 	int offset, tplen, datalen, crclen;
 	int error;
 
@@ -246,6 +248,7 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id)
 		if (!down)
 			continue;
 
+		touchscreen_apply_prop_to_x_y(&tsdata->prop, &x, &y);
 		input_report_abs(tsdata->input, ABS_MT_POSITION_X, x);
 		input_report_abs(tsdata->input, ABS_MT_POSITION_Y, y);
 	}
@@ -966,7 +969,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 	input_set_abs_params(input, ABS_MT_POSITION_Y,
 			     0, tsdata->num_y * 64 - 1, 0, 0);
 
-	touchscreen_parse_properties(input, true, NULL);
+	touchscreen_parse_properties(input, true, &tsdata->prop);
 
 	error = input_mt_init_slots(input, tsdata->max_support_points,
 				INPUT_MT_DIRECT);
-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH resend 2/4] touchscreen: ft5x06: Add support for axis inversion / swapping

[Hans de Goede]

Add support for axis inversion / swapping using the new
touchscreen_parse_properties and touchscreen_apply_prop_to_x_y
functionality.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/input/touchscreen/edt-ft5x06.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index a97b54a..6fe8d51 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -86,6 +86,7 @@ struct edt_reg_addr {
 struct edt_ft5x06_ts_data {
 	struct i2c_client *client;
 	struct input_dev *input;
+	struct touchscreen_properties prop;
 	u16 num_x;
 	u16 num_y;
 
@@ -173,7 +174,8 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id)
 	struct device *dev = &tsdata->client->dev;
 	u8 cmd;
 	u8 rdbuf[63];
-	int i, type, x, y, id;
+	s16 x, y;
+	int i, type, id;
 	int offset, tplen, datalen, crclen;
 	int error;
 
@@ -246,6 +248,7 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id)
 		if (!down)
 			continue;
 
+		touchscreen_apply_prop_to_x_y(&tsdata->prop, &x, &y);
 		input_report_abs(tsdata->input, ABS_MT_POSITION_X, x);
 		input_report_abs(tsdata->input, ABS_MT_POSITION_Y, y);
 	}
@@ -966,7 +969,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 	input_set_abs_params(input, ABS_MT_POSITION_Y,
 			     0, tsdata->num_y * 64 - 1, 0, 0);
 
-	touchscreen_parse_properties(input, true, NULL);
+	touchscreen_parse_properties(input, true, &tsdata->prop);
 
 	error = input_mt_init_slots(input, tsdata->max_support_points,
 				INPUT_MT_DIRECT);
-- 
2.5.0

[PATCH resend 3/4] touchscreen: icn8318: Use parse_properties and apply_prop_to_x_y helpers

[Hans de Goede]

Use the touchscreen_parse_properties and touchscreen_apply_prop_to_x_y
functions, instead of DIY code, this results in a nice cleanup.

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
Changes in v2:
-Call input_set_capability() before calling touchscreen_parse_properties()
---
 drivers/input/touchscreen/chipone_icn8318.c | 58 +++++++----------------------
 1 file changed, 14 insertions(+), 44 deletions(-)

diff --git a/drivers/input/touchscreen/chipone_icn8318.c b/drivers/input/touchscreen/chipone_icn8318.c
index 22a6fea..92151f9 100644
--- a/drivers/input/touchscreen/chipone_icn8318.c
+++ b/drivers/input/touchscreen/chipone_icn8318.c
@@ -17,6 +17,7 @@
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
 #include <linux/module.h>
 #include <linux/of.h>
 
@@ -52,11 +53,7 @@ struct icn8318_data {
 	struct i2c_client *client;
 	struct input_dev *input;
 	struct gpio_desc *wake_gpio;
-	u32 max_x;
-	u32 max_y;
-	bool invert_x;
-	bool invert_y;
-	bool swap_x_y;
+	struct touchscreen_properties prop;
 };
 
 static int icn8318_read_touch_data(struct i2c_client *client,
@@ -91,7 +88,8 @@ static irqreturn_t icn8318_irq(int irq, void *dev_id)
 	struct icn8318_data *data = dev_id;
 	struct device *dev = &data->client->dev;
 	struct icn8318_touch_data touch_data;
-	int i, ret, x, y;
+	int i, ret;
+	s16 x, y;
 
 	ret = icn8318_read_touch_data(data->client, &touch_data);
 	if (ret < 0) {
@@ -127,19 +125,9 @@ static irqreturn_t icn8318_irq(int irq, void *dev_id)
 		x = be16_to_cpu(touch->x);
 		y = be16_to_cpu(touch->y);
 
-		if (data->invert_x)
-			x = data->max_x - x;
-
-		if (data->invert_y)
-			y = data->max_y - y;
-
-		if (!data->swap_x_y) {
-			input_event(data->input, EV_ABS, ABS_MT_POSITION_X, x);
-			input_event(data->input, EV_ABS, ABS_MT_POSITION_Y, y);
-		} else {
-			input_event(data->input, EV_ABS, ABS_MT_POSITION_X, y);
-			input_event(data->input, EV_ABS, ABS_MT_POSITION_Y, x);
-		}
+		touchscreen_apply_prop_to_x_y(&data->prop, &x, &y);
+		input_event(data->input, EV_ABS, ABS_MT_POSITION_X, x);
+		input_event(data->input, EV_ABS, ABS_MT_POSITION_Y, y);
 	}
 
 	input_mt_sync_frame(data->input);
@@ -200,10 +188,8 @@ static int icn8318_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
 	struct device *dev = &client->dev;
-	struct device_node *np = dev->of_node;
 	struct icn8318_data *data;
 	struct input_dev *input;
-	u32 fuzz_x = 0, fuzz_y = 0;
 	int error;
 
 	if (!client->irq) {
@@ -223,19 +209,6 @@ static int icn8318_probe(struct i2c_client *client,
 		return error;
 	}
 
-	if (of_property_read_u32(np, "touchscreen-size-x", &data->max_x) ||
-	    of_property_read_u32(np, "touchscreen-size-y", &data->max_y)) {
-		dev_err(dev, "Error touchscreen-size-x and/or -y missing\n");
-		return -EINVAL;
-	}
-
-	/* Optional */
-	of_property_read_u32(np, "touchscreen-fuzz-x", &fuzz_x);
-	of_property_read_u32(np, "touchscreen-fuzz-y", &fuzz_y);
-	data->invert_x = of_property_read_bool(np, "touchscreen-inverted-x");
-	data->invert_y = of_property_read_bool(np, "touchscreen-inverted-y");
-	data->swap_x_y = of_property_read_bool(np, "touchscreen-swapped-x-y");
-
 	input = devm_input_allocate_device(dev);
 	if (!input)
 		return -ENOMEM;
@@ -246,16 +219,13 @@ static int icn8318_probe(struct i2c_client *client,
 	input->close = icn8318_stop;
 	input->dev.parent = dev;
 
-	if (!data->swap_x_y) {
-		input_set_abs_params(input, ABS_MT_POSITION_X, 0,
-				     data->max_x, fuzz_x, 0);
-		input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
-				     data->max_y, fuzz_y, 0);
-	} else {
-		input_set_abs_params(input, ABS_MT_POSITION_X, 0,
-				     data->max_y, fuzz_y, 0);
-		input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
-				     data->max_x, fuzz_x, 0);
+	input_set_capability(input, EV_ABS, ABS_MT_POSITION_X);
+	input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y);
+	touchscreen_parse_properties(input, true, &data->prop);
+	if (!input_abs_get_max(input, ABS_MT_POSITION_X) ||
+	    !input_abs_get_max(input, ABS_MT_POSITION_Y)) {
+		dev_err(dev, "Error touchscreen-size-x and/or -y missing\n");
+		return -EINVAL;
 	}
 
 	error = input_mt_init_slots(input, ICN8318_MAX_TOUCHES,
-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH resend 3/4] touchscreen: icn8318: Use parse_properties and apply_prop_to_x_y helpers

[Hans de Goede]

Use the touchscreen_parse_properties and touchscreen_apply_prop_to_x_y
functions, instead of DIY code, this results in a nice cleanup.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
-Call input_set_capability() before calling touchscreen_parse_properties()
---
 drivers/input/touchscreen/chipone_icn8318.c | 58 +++++++----------------------
 1 file changed, 14 insertions(+), 44 deletions(-)

diff --git a/drivers/input/touchscreen/chipone_icn8318.c b/drivers/input/touchscreen/chipone_icn8318.c
index 22a6fea..92151f9 100644
--- a/drivers/input/touchscreen/chipone_icn8318.c
+++ b/drivers/input/touchscreen/chipone_icn8318.c
@@ -17,6 +17,7 @@
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
 #include <linux/module.h>
 #include <linux/of.h>
 
@@ -52,11 +53,7 @@ struct icn8318_data {
 	struct i2c_client *client;
 	struct input_dev *input;
 	struct gpio_desc *wake_gpio;
-	u32 max_x;
-	u32 max_y;
-	bool invert_x;
-	bool invert_y;
-	bool swap_x_y;
+	struct touchscreen_properties prop;
 };
 
 static int icn8318_read_touch_data(struct i2c_client *client,
@@ -91,7 +88,8 @@ static irqreturn_t icn8318_irq(int irq, void *dev_id)
 	struct icn8318_data *data = dev_id;
 	struct device *dev = &data->client->dev;
 	struct icn8318_touch_data touch_data;
-	int i, ret, x, y;
+	int i, ret;
+	s16 x, y;
 
 	ret = icn8318_read_touch_data(data->client, &touch_data);
 	if (ret < 0) {
@@ -127,19 +125,9 @@ static irqreturn_t icn8318_irq(int irq, void *dev_id)
 		x = be16_to_cpu(touch->x);
 		y = be16_to_cpu(touch->y);
 
-		if (data->invert_x)
-			x = data->max_x - x;
-
-		if (data->invert_y)
-			y = data->max_y - y;
-
-		if (!data->swap_x_y) {
-			input_event(data->input, EV_ABS, ABS_MT_POSITION_X, x);
-			input_event(data->input, EV_ABS, ABS_MT_POSITION_Y, y);
-		} else {
-			input_event(data->input, EV_ABS, ABS_MT_POSITION_X, y);
-			input_event(data->input, EV_ABS, ABS_MT_POSITION_Y, x);
-		}
+		touchscreen_apply_prop_to_x_y(&data->prop, &x, &y);
+		input_event(data->input, EV_ABS, ABS_MT_POSITION_X, x);
+		input_event(data->input, EV_ABS, ABS_MT_POSITION_Y, y);
 	}
 
 	input_mt_sync_frame(data->input);
@@ -200,10 +188,8 @@ static int icn8318_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
 	struct device *dev = &client->dev;
-	struct device_node *np = dev->of_node;
 	struct icn8318_data *data;
 	struct input_dev *input;
-	u32 fuzz_x = 0, fuzz_y = 0;
 	int error;
 
 	if (!client->irq) {
@@ -223,19 +209,6 @@ static int icn8318_probe(struct i2c_client *client,
 		return error;
 	}
 
-	if (of_property_read_u32(np, "touchscreen-size-x", &data->max_x) ||
-	    of_property_read_u32(np, "touchscreen-size-y", &data->max_y)) {
-		dev_err(dev, "Error touchscreen-size-x and/or -y missing\n");
-		return -EINVAL;
-	}
-
-	/* Optional */
-	of_property_read_u32(np, "touchscreen-fuzz-x", &fuzz_x);
-	of_property_read_u32(np, "touchscreen-fuzz-y", &fuzz_y);
-	data->invert_x = of_property_read_bool(np, "touchscreen-inverted-x");
-	data->invert_y = of_property_read_bool(np, "touchscreen-inverted-y");
-	data->swap_x_y = of_property_read_bool(np, "touchscreen-swapped-x-y");
-
 	input = devm_input_allocate_device(dev);
 	if (!input)
 		return -ENOMEM;
@@ -246,16 +219,13 @@ static int icn8318_probe(struct i2c_client *client,
 	input->close = icn8318_stop;
 	input->dev.parent = dev;
 
-	if (!data->swap_x_y) {
-		input_set_abs_params(input, ABS_MT_POSITION_X, 0,
-				     data->max_x, fuzz_x, 0);
-		input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
-				     data->max_y, fuzz_y, 0);
-	} else {
-		input_set_abs_params(input, ABS_MT_POSITION_X, 0,
-				     data->max_y, fuzz_y, 0);
-		input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
-				     data->max_x, fuzz_x, 0);
+	input_set_capability(input, EV_ABS, ABS_MT_POSITION_X);
+	input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y);
+	touchscreen_parse_properties(input, true, &data->prop);
+	if (!input_abs_get_max(input, ABS_MT_POSITION_X) ||
+	    !input_abs_get_max(input, ABS_MT_POSITION_Y)) {
+		dev_err(dev, "Error touchscreen-size-x and/or -y missing\n");
+		return -EINVAL;
 	}
 
 	error = input_mt_init_slots(input, ICN8318_MAX_TOUCHES,
-- 
2.5.0

[PATCH resend 4/4] touchscreen: pixcir_ts: Add support for axis inversion / swapping

[Hans de Goede]

Add support for axis inversion / swapping using the new
touchscreen_parse_properties and touchscreen_apply_prop_to_x_y
functionality.

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
Changes in v2:
-Add a fix which actually makes this patch compile, which accidentally ended
 up in a later commit in my tree
---
 drivers/input/touchscreen/pixcir_i2c_ts.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index f58784d..0321be3 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -41,13 +41,14 @@ struct pixcir_i2c_ts_data {
 	struct gpio_desc *gpio_enable;
 	struct gpio_desc *gpio_wake;
 	const struct pixcir_i2c_chip_data *chip;
+	struct touchscreen_properties prop;
 	int max_fingers;	/* Max fingers supported in this instance */
 	bool running;
 };
 
 struct pixcir_touch {
-	int x;
-	int y;
+	s16 x;
+	s16 y;
 	int id;
 };
 
@@ -100,6 +101,9 @@ static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata,
 	for (i = 0; i < touch; i++) {
 		report->touches[i].x = (bufptr[1] << 8) | bufptr[0];
 		report->touches[i].y = (bufptr[3] << 8) | bufptr[2];
+		touchscreen_apply_prop_to_x_y(&tsdata->prop,
+					      &report->touches[i].x,
+					      &report->touches[i].y);
 
 		if (chip->has_hw_ids) {
 			report->touches[i].id = bufptr[4];
@@ -515,7 +519,7 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
 	} else {
 		input_set_capability(input, EV_ABS, ABS_MT_POSITION_X);
 		input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y);
-		touchscreen_parse_properties(input, true, NULL);
+		touchscreen_parse_properties(input, true, &tsdata->prop);
 		if (!input_abs_get_max(input, ABS_MT_POSITION_X) ||
 		    !input_abs_get_max(input, ABS_MT_POSITION_Y)) {
 			dev_err(dev, "Touchscreen size is not specified\n");
-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH resend 4/4] touchscreen: pixcir_ts: Add support for axis inversion / swapping

[Hans de Goede]

Add support for axis inversion / swapping using the new
touchscreen_parse_properties and touchscreen_apply_prop_to_x_y
functionality.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
-Add a fix which actually makes this patch compile, which accidentally ended
 up in a later commit in my tree
---
 drivers/input/touchscreen/pixcir_i2c_ts.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index f58784d..0321be3 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -41,13 +41,14 @@ struct pixcir_i2c_ts_data {
 	struct gpio_desc *gpio_enable;
 	struct gpio_desc *gpio_wake;
 	const struct pixcir_i2c_chip_data *chip;
+	struct touchscreen_properties prop;
 	int max_fingers;	/* Max fingers supported in this instance */
 	bool running;
 };
 
 struct pixcir_touch {
-	int x;
-	int y;
+	s16 x;
+	s16 y;
 	int id;
 };
 
@@ -100,6 +101,9 @@ static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata,
 	for (i = 0; i < touch; i++) {
 		report->touches[i].x = (bufptr[1] << 8) | bufptr[0];
 		report->touches[i].y = (bufptr[3] << 8) | bufptr[2];
+		touchscreen_apply_prop_to_x_y(&tsdata->prop,
+					      &report->touches[i].x,
+					      &report->touches[i].y);
 
 		if (chip->has_hw_ids) {
 			report->touches[i].id = bufptr[4];
@@ -515,7 +519,7 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
 	} else {
 		input_set_capability(input, EV_ABS, ABS_MT_POSITION_X);
 		input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y);
-		touchscreen_parse_properties(input, true, NULL);
+		touchscreen_parse_properties(input, true, &tsdata->prop);
 		if (!input_abs_get_max(input, ABS_MT_POSITION_X) ||
 		    !input_abs_get_max(input, ABS_MT_POSITION_Y)) {
 			dev_err(dev, "Touchscreen size is not specified\n");
-- 
2.5.0

[PATCH resend 0/4] of_touchscreen-helpers: Add support for inverted / swapped axis

[Hans de Goede]

Hi Dmitry,

It seems that this series has fallen through the cracks *again*.

This is a resend of the resend of this set posted a while back, now rebased
on top of v4.6-rc1.

Last time one remark you made was:

+#include <asm/types.h>

> If you are trying to add this to have s32 typedefs
> then I think it is wrong one.

I've double checked and I believe it is the right one,
s32 is typedef-ed in <asm-generic/int-ll64.h> but no-one is including that
directly.

Regards,

Hans

[PATCH resend 1/4] of_touchscreen-helpers: Add support for inverted / swapped axis

[Hans de Goede]

Extend touchscreen_parse_properties() with support for the
touchscreen-inverted-x/y and touchscreen-swapped-x-y properties and
add a touchscreen_apply_prop_to_x_y() helper function for adjusting
x and y coordinates to take these properties into account.

This commit also modifies the existing callers of
touchscreen_parse_properties() to pass in NULL for the new third
argument, keeping the existing behavior.

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 drivers/input/touchscreen/edt-ft5x06.c     |  2 +-
 drivers/input/touchscreen/of_touchscreen.c | 56 +++++++++++++++++++++++++++++-
 drivers/input/touchscreen/pixcir_i2c_ts.c  |  2 +-
 drivers/input/touchscreen/tsc200x-core.c   |  2 +-
 include/linux/input/touchscreen.h          | 16 ++++++++-
 5 files changed, 73 insertions(+), 5 deletions(-)

diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index 23fbe38..e8825e5 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -972,7 +972,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 	input_set_abs_params(input, ABS_MT_POSITION_Y,
 			     0, tsdata->num_y * 64 - 1, 0, 0);
 
-	touchscreen_parse_properties(input, true);
+	touchscreen_parse_properties(input, true, NULL);
 
 	error = input_mt_init_slots(input, tsdata->max_support_points,
 				INPUT_MT_DIRECT);
diff --git a/drivers/input/touchscreen/of_touchscreen.c b/drivers/input/touchscreen/of_touchscreen.c
index bb6f2fe..6fd9872 100644
--- a/drivers/input/touchscreen/of_touchscreen.c
+++ b/drivers/input/touchscreen/of_touchscreen.c
@@ -55,12 +55,16 @@ static void touchscreen_set_params(struct input_dev *dev,
  * @input: input device that should be parsed
  * @multitouch: specifies whether parsed properties should be applied to
  *	single-touch or multi-touch axes
+ * @prop: pointer to a struct touchscreen_properties into which to store
+ *	axis swap and invert info for use with touchscreen_report_x_y();
+ *	or NULL
  *
  * This function parses common DT properties for touchscreens and setups the
  * input device accordingly. The function keeps previously set up default
  * values if no value is specified via DT.
  */
-void touchscreen_parse_properties(struct input_dev *input, bool multitouch)
+void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
+				  struct touchscreen_properties *prop)
 {
 	struct device *dev = input->dev.parent;
 	unsigned int axis;
@@ -104,5 +108,55 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch)
 						&fuzz);
 	if (data_present)
 		touchscreen_set_params(input, axis, maximum, fuzz);
+
+	if (!prop)
+		return;
+
+	axis = multitouch ? ABS_MT_POSITION_X : ABS_X;
+
+	prop->max_x = input_abs_get_max(input, axis);
+	prop->max_y = input_abs_get_max(input, axis + 1);
+	prop->invert_x =
+		device_property_read_bool(dev, "touchscreen-inverted-x");
+	prop->invert_y =
+		device_property_read_bool(dev, "touchscreen-inverted-y");
+	prop->swap_x_y =
+		device_property_read_bool(dev, "touchscreen-swapped-x-y");
+
+	if (prop->swap_x_y) {
+		struct input_absinfo tmp_absinfo;
+
+		tmp_absinfo = input->absinfo[axis];
+		input->absinfo[axis] = input->absinfo[axis + 1];
+		input->absinfo[axis + 1] = tmp_absinfo;
+	}
 }
 EXPORT_SYMBOL(touchscreen_parse_properties);
+
+/**
+ * touchscreen_apply_prop_to_x_y - Adjust abs x and y coordinates
+ * @prop: pointer to a struct touchscreen_properties
+ * @x: X coordinate to apply inversion and swapping to
+ * @y: Y coordinate to apply inversion and swapping to
+ *
+ * Adjust the passed in x and y values applying any axis inversion and
+ * swapping requested in the passed in touchscreen_properties.
+ */
+void touchscreen_apply_prop_to_x_y(struct touchscreen_properties *prop,
+				   s16 *x, s16 *y)
+{
+	if (prop->invert_x)
+		*x = prop->max_x - *x;
+
+	if (prop->invert_y)
+		*y = prop->max_y - *y;
+
+	if (prop->swap_x_y) {
+		s16 tmp;
+
+		tmp = *x;
+		*x = *y;
+		*y = tmp;
+	}
+}
+EXPORT_SYMBOL(touchscreen_apply_prop_to_x_y);
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index 09523a3..f58784d 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -515,7 +515,7 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
 	} else {
 		input_set_capability(input, EV_ABS, ABS_MT_POSITION_X);
 		input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y);
-		touchscreen_parse_properties(input, true);
+		touchscreen_parse_properties(input, true, NULL);
 		if (!input_abs_get_max(input, ABS_MT_POSITION_X) ||
 		    !input_abs_get_max(input, ABS_MT_POSITION_Y)) {
 			dev_err(dev, "Touchscreen size is not specified\n");
diff --git a/drivers/input/touchscreen/tsc200x-core.c b/drivers/input/touchscreen/tsc200x-core.c
index 15240c1..26e81d1b 100644
--- a/drivers/input/touchscreen/tsc200x-core.c
+++ b/drivers/input/touchscreen/tsc200x-core.c
@@ -559,7 +559,7 @@ int tsc200x_probe(struct device *dev, int irq, __u16 bustype,
 	input_set_abs_params(input_dev, ABS_PRESSURE, 0, max_p, fudge_p, 0);
 
 	if (np)
-		touchscreen_parse_properties(input_dev, false);
+		touchscreen_parse_properties(input_dev, false, NULL);
 
 	input_dev->open = tsc200x_open;
 	input_dev->close = tsc200x_close;
diff --git a/include/linux/input/touchscreen.h b/include/linux/input/touchscreen.h
index c91e137..9e6ba20 100644
--- a/include/linux/input/touchscreen.h
+++ b/include/linux/input/touchscreen.h
@@ -9,8 +9,22 @@
 #ifndef _TOUCHSCREEN_H
 #define _TOUCHSCREEN_H
 
+#include <asm/types.h>
+
 struct input_dev;
 
-void touchscreen_parse_properties(struct input_dev *dev, bool multitouch);
+struct touchscreen_properties {
+	s32 max_x;
+	s32 max_y;
+	bool invert_x;
+	bool invert_y;
+	bool swap_x_y;
+};
+
+void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
+				  struct touchscreen_properties *prop);
+
+void touchscreen_apply_prop_to_x_y(struct touchscreen_properties *prop,
+				   s16 *x, s16 *y);
 
 #endif
-- 
2.7.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH resend 1/4] of_touchscreen-helpers: Add support for inverted / swapped axis

[Hans de Goede]

Extend touchscreen_parse_properties() with support for the
touchscreen-inverted-x/y and touchscreen-swapped-x-y properties and
add a touchscreen_apply_prop_to_x_y() helper function for adjusting
x and y coordinates to take these properties into account.

This commit also modifies the existing callers of
touchscreen_parse_properties() to pass in NULL for the new third
argument, keeping the existing behavior.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/input/touchscreen/edt-ft5x06.c     |  2 +-
 drivers/input/touchscreen/of_touchscreen.c | 56 +++++++++++++++++++++++++++++-
 drivers/input/touchscreen/pixcir_i2c_ts.c  |  2 +-
 drivers/input/touchscreen/tsc200x-core.c   |  2 +-
 include/linux/input/touchscreen.h          | 16 ++++++++-
 5 files changed, 73 insertions(+), 5 deletions(-)

diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index 23fbe38..e8825e5 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -972,7 +972,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 	input_set_abs_params(input, ABS_MT_POSITION_Y,
 			     0, tsdata->num_y * 64 - 1, 0, 0);
 
-	touchscreen_parse_properties(input, true);
+	touchscreen_parse_properties(input, true, NULL);
 
 	error = input_mt_init_slots(input, tsdata->max_support_points,
 				INPUT_MT_DIRECT);
diff --git a/drivers/input/touchscreen/of_touchscreen.c b/drivers/input/touchscreen/of_touchscreen.c
index bb6f2fe..6fd9872 100644
--- a/drivers/input/touchscreen/of_touchscreen.c
+++ b/drivers/input/touchscreen/of_touchscreen.c
@@ -55,12 +55,16 @@ static void touchscreen_set_params(struct input_dev *dev,
  * @input: input device that should be parsed
  * @multitouch: specifies whether parsed properties should be applied to
  *	single-touch or multi-touch axes
+ * @prop: pointer to a struct touchscreen_properties into which to store
+ *	axis swap and invert info for use with touchscreen_report_x_y();
+ *	or NULL
  *
  * This function parses common DT properties for touchscreens and setups the
  * input device accordingly. The function keeps previously set up default
  * values if no value is specified via DT.
  */
-void touchscreen_parse_properties(struct input_dev *input, bool multitouch)
+void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
+				  struct touchscreen_properties *prop)
 {
 	struct device *dev = input->dev.parent;
 	unsigned int axis;
@@ -104,5 +108,55 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch)
 						&fuzz);
 	if (data_present)
 		touchscreen_set_params(input, axis, maximum, fuzz);
+
+	if (!prop)
+		return;
+
+	axis = multitouch ? ABS_MT_POSITION_X : ABS_X;
+
+	prop->max_x = input_abs_get_max(input, axis);
+	prop->max_y = input_abs_get_max(input, axis + 1);
+	prop->invert_x =
+		device_property_read_bool(dev, "touchscreen-inverted-x");
+	prop->invert_y =
+		device_property_read_bool(dev, "touchscreen-inverted-y");
+	prop->swap_x_y =
+		device_property_read_bool(dev, "touchscreen-swapped-x-y");
+
+	if (prop->swap_x_y) {
+		struct input_absinfo tmp_absinfo;
+
+		tmp_absinfo = input->absinfo[axis];
+		input->absinfo[axis] = input->absinfo[axis + 1];
+		input->absinfo[axis + 1] = tmp_absinfo;
+	}
 }
 EXPORT_SYMBOL(touchscreen_parse_properties);
+
+/**
+ * touchscreen_apply_prop_to_x_y - Adjust abs x and y coordinates
+ * @prop: pointer to a struct touchscreen_properties
+ * @x: X coordinate to apply inversion and swapping to
+ * @y: Y coordinate to apply inversion and swapping to
+ *
+ * Adjust the passed in x and y values applying any axis inversion and
+ * swapping requested in the passed in touchscreen_properties.
+ */
+void touchscreen_apply_prop_to_x_y(struct touchscreen_properties *prop,
+				   s16 *x, s16 *y)
+{
+	if (prop->invert_x)
+		*x = prop->max_x - *x;
+
+	if (prop->invert_y)
+		*y = prop->max_y - *y;
+
+	if (prop->swap_x_y) {
+		s16 tmp;
+
+		tmp = *x;
+		*x = *y;
+		*y = tmp;
+	}
+}
+EXPORT_SYMBOL(touchscreen_apply_prop_to_x_y);
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index 09523a3..f58784d 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -515,7 +515,7 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
 	} else {
 		input_set_capability(input, EV_ABS, ABS_MT_POSITION_X);
 		input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y);
-		touchscreen_parse_properties(input, true);
+		touchscreen_parse_properties(input, true, NULL);
 		if (!input_abs_get_max(input, ABS_MT_POSITION_X) ||
 		    !input_abs_get_max(input, ABS_MT_POSITION_Y)) {
 			dev_err(dev, "Touchscreen size is not specified\n");
diff --git a/drivers/input/touchscreen/tsc200x-core.c b/drivers/input/touchscreen/tsc200x-core.c
index 15240c1..26e81d1b 100644
--- a/drivers/input/touchscreen/tsc200x-core.c
+++ b/drivers/input/touchscreen/tsc200x-core.c
@@ -559,7 +559,7 @@ int tsc200x_probe(struct device *dev, int irq, __u16 bustype,
 	input_set_abs_params(input_dev, ABS_PRESSURE, 0, max_p, fudge_p, 0);
 
 	if (np)
-		touchscreen_parse_properties(input_dev, false);
+		touchscreen_parse_properties(input_dev, false, NULL);
 
 	input_dev->open = tsc200x_open;
 	input_dev->close = tsc200x_close;
diff --git a/include/linux/input/touchscreen.h b/include/linux/input/touchscreen.h
index c91e137..9e6ba20 100644
--- a/include/linux/input/touchscreen.h
+++ b/include/linux/input/touchscreen.h
@@ -9,8 +9,22 @@
 #ifndef _TOUCHSCREEN_H
 #define _TOUCHSCREEN_H
 
+#include <asm/types.h>
+
 struct input_dev;
 
-void touchscreen_parse_properties(struct input_dev *dev, bool multitouch);
+struct touchscreen_properties {
+	s32 max_x;
+	s32 max_y;
+	bool invert_x;
+	bool invert_y;
+	bool swap_x_y;
+};
+
+void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
+				  struct touchscreen_properties *prop);
+
+void touchscreen_apply_prop_to_x_y(struct touchscreen_properties *prop,
+				   s16 *x, s16 *y);
 
 #endif
-- 
2.7.3