All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH] pcap: fix captured frame length
@ 2016-01-28 11:09 Dror Birkman
  2016-01-28 18:14 ` Nicolas Pernas Maradei
  2016-02-17 10:18 ` Nicolas Pernas Maradei
  0 siblings, 2 replies; 6+ messages in thread
From: Dror Birkman @ 2016-01-28 11:09 UTC (permalink / raw)
  To: nicolas.pernas.maradei, john.mcnamara; +Cc: dev, Dror Birkman

The actual captured length is header.caplen, whereas header.len is
the original length on the wire.

Signed-off-by: Dror Birkman <dror.birkman@lightcyber.com>
---


Without this fix, if the captured length is smaller than the original
length on the wire, mbuf will contain incorrect data.


 drivers/net/pcap/rte_eth_pcap.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/pcap/rte_eth_pcap.c b/drivers/net/pcap/rte_eth_pcap.c
index f9230eb..1d121f8 100644
--- a/drivers/net/pcap/rte_eth_pcap.c
+++ b/drivers/net/pcap/rte_eth_pcap.c
@@ -220,25 +220,25 @@ eth_pcap_rx(void *queue,
 		buf_size = (uint16_t)(rte_pktmbuf_data_room_size(pcap_q->mb_pool) -
 				RTE_PKTMBUF_HEADROOM);
 
-		if (header.len <= buf_size) {
+		if (header.caplen <= buf_size) {
 			/* pcap packet will fit in the mbuf, go ahead and copy */
 			rte_memcpy(rte_pktmbuf_mtod(mbuf, void *), packet,
-					header.len);
-			mbuf->data_len = (uint16_t)header.len;
+					header.caplen);
+			mbuf->data_len = (uint16_t)header.caplen;
 		} else {
 			/* Try read jumbo frame into multi mbufs. */
 			if (unlikely(eth_pcap_rx_jumbo(pcap_q->mb_pool,
 						       mbuf,
 						       packet,
-						       header.len) == -1))
+						       header.caplen) == -1))
 				break;
 		}
 
-		mbuf->pkt_len = (uint16_t)header.len;
+		mbuf->pkt_len = (uint16_t)header.caplen;
 		mbuf->port = pcap_q->in_port;
 		bufs[num_rx] = mbuf;
 		num_rx++;
-		rx_bytes += header.len;
+		rx_bytes += header.caplen;
 	}
 	pcap_q->rx_pkts += num_rx;
 	pcap_q->rx_bytes += rx_bytes;
-- 
2.6.3

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* Re: [PATCH] pcap: fix captured frame length
  2016-01-28 11:09 [PATCH] pcap: fix captured frame length Dror Birkman
@ 2016-01-28 18:14 ` Nicolas Pernas Maradei
  2016-02-16 15:31   ` Bruce Richardson
  2016-03-09 18:42   ` Bruce Richardson
  2016-02-17 10:18 ` Nicolas Pernas Maradei
  1 sibling, 2 replies; 6+ messages in thread
From: Nicolas Pernas Maradei @ 2016-01-28 18:14 UTC (permalink / raw)
  Cc: dev

Hi Dror,

Good catch. What you are saying makes sense and it is also explained in 
pcap's documentation. Was your setup unusual though?
This might sound like a silly question but I don't remember seeing that 
issue and I should have since your fix is correct.

Nico.

On 28/01/16 11:09, Dror Birkman wrote:
> The actual captured length is header.caplen, whereas header.len is
> the original length on the wire.
>
> Signed-off-by: Dror Birkman <dror.birkman@lightcyber.com>
> ---
>
>
> Without this fix, if the captured length is smaller than the original
> length on the wire, mbuf will contain incorrect data.
>
>
>   drivers/net/pcap/rte_eth_pcap.c | 12 ++++++------
>   1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/pcap/rte_eth_pcap.c b/drivers/net/pcap/rte_eth_pcap.c
> index f9230eb..1d121f8 100644
> --- a/drivers/net/pcap/rte_eth_pcap.c
> +++ b/drivers/net/pcap/rte_eth_pcap.c
> @@ -220,25 +220,25 @@ eth_pcap_rx(void *queue,
>   		buf_size = (uint16_t)(rte_pktmbuf_data_room_size(pcap_q->mb_pool) -
>   				RTE_PKTMBUF_HEADROOM);
>   
> -		if (header.len <= buf_size) {
> +		if (header.caplen <= buf_size) {
>   			/* pcap packet will fit in the mbuf, go ahead and copy */
>   			rte_memcpy(rte_pktmbuf_mtod(mbuf, void *), packet,
> -					header.len);
> -			mbuf->data_len = (uint16_t)header.len;
> +					header.caplen);
> +			mbuf->data_len = (uint16_t)header.caplen;
>   		} else {
>   			/* Try read jumbo frame into multi mbufs. */
>   			if (unlikely(eth_pcap_rx_jumbo(pcap_q->mb_pool,
>   						       mbuf,
>   						       packet,
> -						       header.len) == -1))
> +						       header.caplen) == -1))
>   				break;
>   		}
>   
> -		mbuf->pkt_len = (uint16_t)header.len;
> +		mbuf->pkt_len = (uint16_t)header.caplen;
>   		mbuf->port = pcap_q->in_port;
>   		bufs[num_rx] = mbuf;
>   		num_rx++;
> -		rx_bytes += header.len;
> +		rx_bytes += header.caplen;
>   	}
>   	pcap_q->rx_pkts += num_rx;
>   	pcap_q->rx_bytes += rx_bytes;

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH] pcap: fix captured frame length
  2016-01-28 18:14 ` Nicolas Pernas Maradei
@ 2016-02-16 15:31   ` Bruce Richardson
  2016-03-09 18:42   ` Bruce Richardson
  1 sibling, 0 replies; 6+ messages in thread
From: Bruce Richardson @ 2016-02-16 15:31 UTC (permalink / raw)
  To: Nicolas Pernas Maradei; +Cc: dev

On Thu, Jan 28, 2016 at 06:14:45PM +0000, Nicolas Pernas Maradei wrote:
> Hi Dror,
> 
> Good catch. What you are saying makes sense and it is also explained in
> pcap's documentation. Was your setup unusual though?
> This might sound like a silly question but I don't remember seeing that
> issue and I should have since your fix is correct.
> 
> Nico.
> 

Hi Nico,

I assume from your reply that you are ok with this patch. Can you please confirm 
this by acking it using the proper form "Acked-by: " line.

Thanks,
/Bruce

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH] pcap: fix captured frame length
  2016-01-28 11:09 [PATCH] pcap: fix captured frame length Dror Birkman
  2016-01-28 18:14 ` Nicolas Pernas Maradei
@ 2016-02-17 10:18 ` Nicolas Pernas Maradei
  1 sibling, 0 replies; 6+ messages in thread
From: Nicolas Pernas Maradei @ 2016-02-17 10:18 UTC (permalink / raw)
  To: Dror Birkman, john.mcnamara; +Cc: dev

Hi,

I'm just adding the Acked-by line to the patch. Apologise I missed that one earlier.

Nico.


On 28/01/16 11:09, Dror Birkman wrote:
> The actual captured length is header.caplen, whereas header.len is
> the original length on the wire.
>
> Signed-off-by: Dror Birkman <dror.birkman@lightcyber.com>
> Acked-by: Nicolas Pernas Maradei <nicolas.pernas.maradei@emutex.com>
> ---
>
>
> Without this fix, if the captured length is smaller than the original
> length on the wire, mbuf will contain incorrect data.
>
>
>  drivers/net/pcap/rte_eth_pcap.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/pcap/rte_eth_pcap.c b/drivers/net/pcap/rte_eth_pcap.c
> index f9230eb..1d121f8 100644
> --- a/drivers/net/pcap/rte_eth_pcap.c
> +++ b/drivers/net/pcap/rte_eth_pcap.c
> @@ -220,25 +220,25 @@ eth_pcap_rx(void *queue,
>  		buf_size = (uint16_t)(rte_pktmbuf_data_room_size(pcap_q->mb_pool) -
>  				RTE_PKTMBUF_HEADROOM);
>  
> -		if (header.len <= buf_size) {
> +		if (header.caplen <= buf_size) {
>  			/* pcap packet will fit in the mbuf, go ahead and copy */
>  			rte_memcpy(rte_pktmbuf_mtod(mbuf, void *), packet,
> -					header.len);
> -			mbuf->data_len = (uint16_t)header.len;
> +					header.caplen);
> +			mbuf->data_len = (uint16_t)header.caplen;
>  		} else {
>  			/* Try read jumbo frame into multi mbufs. */
>  			if (unlikely(eth_pcap_rx_jumbo(pcap_q->mb_pool,
>  						       mbuf,
>  						       packet,
> -						       header.len) == -1))
> +						       header.caplen) == -1))
>  				break;
>  		}
>  
> -		mbuf->pkt_len = (uint16_t)header.len;
> +		mbuf->pkt_len = (uint16_t)header.caplen;
>  		mbuf->port = pcap_q->in_port;
>  		bufs[num_rx] = mbuf;
>  		num_rx++;
> -		rx_bytes += header.len;
> +		rx_bytes += header.caplen;
>  	}
>  	pcap_q->rx_pkts += num_rx;
>  	pcap_q->rx_bytes += rx_bytes;

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH] pcap: fix captured frame length
  2016-01-28 18:14 ` Nicolas Pernas Maradei
  2016-02-16 15:31   ` Bruce Richardson
@ 2016-03-09 18:42   ` Bruce Richardson
  1 sibling, 0 replies; 6+ messages in thread
From: Bruce Richardson @ 2016-03-09 18:42 UTC (permalink / raw)
  To: Nicolas Pernas Maradei; +Cc: dev

On Thu, Jan 28, 2016 at 06:14:45PM +0000, Nicolas Pernas Maradei wrote:
> Hi Dror,
> 
> Good catch. What you are saying makes sense and it is also explained in
> pcap's documentation. Was your setup unusual though?
> This might sound like a silly question but I don't remember seeing that
> issue and I should have since your fix is correct.
> 
> Nico.
> 
Applied to dpdk-next-net/rel_16_04

/Bruce

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH] pcap: fix captured frame length
       [not found] ` <56AA5746.5030401@emutex.com>
@ 2016-01-30 13:38   ` Dror Birkman
  0 siblings, 0 replies; 6+ messages in thread
From: Dror Birkman @ 2016-01-30 13:38 UTC (permalink / raw)
  To: Nicolas Pernas Maradei; +Cc: dev

Hi Nicolas,

Thanks.
I tried to test my application with a pcap file I had, but got weird
results, so I wrote back the rte_mbufs in pcap format and hex compared it
to my input pcap. Only then I noticed that my original pcap had frames that
were captured with a length smaller than the frame length.

I guess you can call it pure (bad) luck :)


Dror

On Thu, Jan 28, 2016 at 8:00 PM, Nicolas Pernas Maradei <
nicolas.pernas.maradei@emutex.com> wrote:

> Hi Dror,
>
> Good catch. What you are saying makes sense and it is also explained in
> pcap's documentation. Was your setup unusual though?
> This might sound like a silly question but I don't remember seeing that
> issue and I should have since your fix is correct.
>
> Nico.
>
> On 28/01/16 08:09, Dror Birkman wrote:
>
> The actual captured length is header.caplen, whereas header.len is
> the original length on the wire.
>
> Signed-off-by: Dror Birkman <dror.birkman@lightcyber.com> <dror.birkman@lightcyber.com>
> ---
>
>
> Without this fix, if the captured length is smaller than the original
> length on the wire, mbuf will contain incorrect data.
>
>
>  drivers/net/pcap/rte_eth_pcap.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/pcap/rte_eth_pcap.c b/drivers/net/pcap/rte_eth_pcap.c
> index f9230eb..1d121f8 100644
> --- a/drivers/net/pcap/rte_eth_pcap.c
> +++ b/drivers/net/pcap/rte_eth_pcap.c
> @@ -220,25 +220,25 @@ eth_pcap_rx(void *queue,
>  		buf_size = (uint16_t)(rte_pktmbuf_data_room_size(pcap_q->mb_pool) -
>  				RTE_PKTMBUF_HEADROOM);
>
> -		if (header.len <= buf_size) {
> +		if (header.caplen <= buf_size) {
>  			/* pcap packet will fit in the mbuf, go ahead and copy */
>  			rte_memcpy(rte_pktmbuf_mtod(mbuf, void *), packet,
> -					header.len);
> -			mbuf->data_len = (uint16_t)header.len;
> +					header.caplen);
> +			mbuf->data_len = (uint16_t)header.caplen;
>  		} else {
>  			/* Try read jumbo frame into multi mbufs. */
>  			if (unlikely(eth_pcap_rx_jumbo(pcap_q->mb_pool,
>  						       mbuf,
>  						       packet,
> -						       header.len) == -1))
> +						       header.caplen) == -1))
>  				break;
>  		}
>
> -		mbuf->pkt_len = (uint16_t)header.len;
> +		mbuf->pkt_len = (uint16_t)header.caplen;
>  		mbuf->port = pcap_q->in_port;
>  		bufs[num_rx] = mbuf;
>  		num_rx++;
> -		rx_bytes += header.len;
> +		rx_bytes += header.caplen;
>  	}
>  	pcap_q->rx_pkts += num_rx;
>  	pcap_q->rx_bytes += rx_bytes;
>
>
> - no title specified @page { } table { border-collapse:collapse;
> border-spacing:0; empty-cells:show } td, th { vertical-align:top;
> font-size:12pt;} h1, h2, h3, h4, h5, h6 { clear:both } ol, ul { margin:0;
> padding:0;} li { list-style: none; margin:0; padding:0;} <!-- "li
> span.odfLiEnd" - IE 7 issue--> li span. { clear: both; line-height:0;
> width:0; height:0; margin:0; padding:0; } span.footnodeNumber {
> padding-right:1em; } span.annotation_style_by_filter { font-size:95%;
> font-family:Arial; background-color:#fff000; margin:0; border:0; padding:0;
> } * { margin:0;} .P1_borderStart { font-size:12pt; line-height:120%;
> margin-top:0cm; font-family:Liberation Serif; writing-mode:page;
> margin-left:0.3cm; margin-right:0cm; text-indent:0cm;
> background-color:transparent; padding-bottom:0.247cm;
> border-bottom-style:none; } .P1 { font-size:12pt; line-height:120%;
> font-family:Liberation Serif; writing-mode:page; margin-left:0.3cm;
> margin-right:0cm; text-indent:0cm; background-color:transparent;
> padding-bottom:0.247cm; padding-top:0cm; border-top-style:none;
> border-bottom-style:none; } .P1_borderEnd { font-size:12pt;
> line-height:120%; margin-bottom:0.247cm; font-family:Liberation Serif;
> writing-mode:page; margin-left:0.3cm; margin-right:0cm; text-indent:0cm;
> background-color:transparent; padding-top:0cm; border-top-style:none;}
> .P2_borderStart { font-size:12pt; line-height:120%; margin-top:0cm;
> font-family:Liberation Serif; writing-mode:page; margin-left:0.3cm;
> margin-right:0cm; text-indent:0cm; background-color:transparent;
> padding-bottom:0.247cm; border-bottom-style:none; } .P2 { font-size:12pt;
> line-height:120%; font-family:Liberation Serif; writing-mode:page;
> margin-left:0.3cm; margin-right:0cm; text-indent:0cm;
> background-color:transparent; padding-bottom:0.247cm; padding-top:0cm;
> border-top-style:none; border-bottom-style:none; } .P2_borderEnd {
> font-size:12pt; line-height:120%; margin-bottom:0.247cm;
> font-family:Liberation Serif; writing-mode:page; margin-left:0.3cm;
> margin-right:0cm; text-indent:0cm; background-color:transparent;
> padding-top:0cm; border-top-style:none;} .P3_borderStart { font-size:10pt;
> line-height:120%; margin-top:0cm; font-family:Courier New;
> writing-mode:page; margin-left:0.3cm; margin-right:0cm; text-indent:0cm;
> background-color:transparent; padding-bottom:0.247cm;
> border-bottom-style:none; } .P3 { font-size:10pt; line-height:120%;
> font-family:Courier New; writing-mode:page; margin-left:0.3cm;
> margin-right:0cm; text-indent:0cm; background-color:transparent;
> padding-bottom:0.247cm; padding-top:0cm; border-top-style:none;
> border-bottom-style:none; } .P3_borderEnd { font-size:10pt;
> line-height:120%; margin-bottom:0.247cm; font-family:Courier New;
> writing-mode:page; margin-left:0.3cm; margin-right:0cm; text-indent:0cm;
> background-color:transparent; padding-top:0cm; border-top-style:none;}
> .Standard { font-size:12pt; font-family:Liberation Serif;
> writing-mode:page; } .Internet_20_link { color:#000080;
> text-decoration:underline; } .T10 { color:#0070c0; } .T11 { color:#0070c0;
> font-size:12pt; } .T12 { color:#0070c0; font-size:20pt; font-weight:bold; }
> .T16 { color:#000000; font-size:10pt; } .T2 { color:#0000ff;
> font-family:Liberation Sans; } .T20 { color:#ff0000; font-size:10pt;
> font-weight:bold; } .T22 { font-size:10pt; } .T3 { color:#0000ff;
> font-family:Liberation Sans; font-size:8pt; } .T6 { color:#0000ff;
> font-size:10pt; } .T7 { color:#000066; font-family:Liberation Sans;
> font-weight:bold; } .T8 { font-family:Liberation Sans; } <!-- ODF styles
> with no properties representable as CSS --> {
>

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2016-03-09 18:42 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-01-28 11:09 [PATCH] pcap: fix captured frame length Dror Birkman
2016-01-28 18:14 ` Nicolas Pernas Maradei
2016-02-16 15:31   ` Bruce Richardson
2016-03-09 18:42   ` Bruce Richardson
2016-02-17 10:18 ` Nicolas Pernas Maradei
     [not found] <1453968561-29085-1-git-send-email-dror.birkman@lightcyber.com>
     [not found] ` <56AA5746.5030401@emutex.com>
2016-01-30 13:38   ` Dror Birkman

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.