* [PATCH] ARM: dts: zynq: Enable USB and USB PHY for ZYBO
@ 2016-02-03 12:41 ` Nathan Rossi
0 siblings, 0 replies; 4+ messages in thread
From: Nathan Rossi @ 2016-02-03 12:41 UTC (permalink / raw)
To: devicetree, linux-arm-kernel
Cc: Mark Rutland, Rob Herring, Michal Simek, Sören Brinkmann,
Nathan Rossi
Setup the USB controller and configure it to operate in host mode.
Additionally add the USB phy node for the ZYBO, including reset gpio
which is connected to a external MIO pin.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Sören Brinkmann <soren.brinkmann@xilinx.com>
---
arch/arm/boot/dts/zynq-zybo.dts | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts
index 16c9cac..8f085b3 100644
--- a/arch/arm/boot/dts/zynq-zybo.dts
+++ b/arch/arm/boot/dts/zynq-zybo.dts
@@ -33,6 +33,11 @@
stdout-path = "serial0:115200n8";
};
+ usb_phy0: phy0 {
+ #phy-cells = <0>;
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio0 46 1>;
+ };
};
&clkc {
@@ -56,3 +61,9 @@
&uart1 {
status = "okay";
};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+ usb-phy = <&usb_phy0>;
+};
--
2.7.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH] ARM: dts: zynq: Enable USB and USB PHY for ZYBO
@ 2016-02-03 12:41 ` Nathan Rossi
0 siblings, 0 replies; 4+ messages in thread
From: Nathan Rossi @ 2016-02-03 12:41 UTC (permalink / raw)
To: linux-arm-kernel
Setup the USB controller and configure it to operate in host mode.
Additionally add the USB phy node for the ZYBO, including reset gpio
which is connected to a external MIO pin.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: S?ren Brinkmann <soren.brinkmann@xilinx.com>
---
arch/arm/boot/dts/zynq-zybo.dts | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts
index 16c9cac..8f085b3 100644
--- a/arch/arm/boot/dts/zynq-zybo.dts
+++ b/arch/arm/boot/dts/zynq-zybo.dts
@@ -33,6 +33,11 @@
stdout-path = "serial0:115200n8";
};
+ usb_phy0: phy0 {
+ #phy-cells = <0>;
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio0 46 1>;
+ };
};
&clkc {
@@ -56,3 +61,9 @@
&uart1 {
status = "okay";
};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+ usb-phy = <&usb_phy0>;
+};
--
2.7.0
^ permalink raw reply related [flat|nested] 4+ messages in thread[parent not found: <1454503265-20605-1-git-send-email-nathan-RujqobwCo1oIa9VG7nliCQ@public.gmane.org>]
* Re: [PATCH] ARM: dts: zynq: Enable USB and USB PHY for ZYBO
2016-02-03 12:41 ` Nathan Rossi
@ 2016-02-09 12:17 ` Michal Simek
-1 siblings, 0 replies; 4+ messages in thread
From: Michal Simek @ 2016-02-09 12:17 UTC (permalink / raw)
To: Nathan Rossi, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Rob Herring, Mark Rutland, Michal Simek, Sören Brinkmann
On 3.2.2016 13:41, Nathan Rossi wrote:
> Setup the USB controller and configure it to operate in host mode.
> Additionally add the USB phy node for the ZYBO, including reset gpio
> which is connected to a external MIO pin.
>
> Signed-off-by: Nathan Rossi <nathan-RujqobwCo1oIa9VG7nliCQ@public.gmane.org>
> Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
> Cc: Michal Simek <michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
> Cc: Sören Brinkmann <soren.brinkmann-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
> ---
> arch/arm/boot/dts/zynq-zybo.dts | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts
> index 16c9cac..8f085b3 100644
> --- a/arch/arm/boot/dts/zynq-zybo.dts
> +++ b/arch/arm/boot/dts/zynq-zybo.dts
> @@ -33,6 +33,11 @@
> stdout-path = "serial0:115200n8";
> };
>
> + usb_phy0: phy0 {
> + #phy-cells = <0>;
> + compatible = "usb-nop-xceiv";
> + reset-gpios = <&gpio0 46 1>;
> + };
> };
>
> &clkc {
> @@ -56,3 +61,9 @@
> &uart1 {
> status = "okay";
> };
> +
> +&usb0 {
> + status = "okay";
> + dr_mode = "host";
> + usb-phy = <&usb_phy0>;
> +};
>
Applied.
Thanks,
Michal
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH] ARM: dts: zynq: Enable USB and USB PHY for ZYBO
@ 2016-02-09 12:17 ` Michal Simek
0 siblings, 0 replies; 4+ messages in thread
From: Michal Simek @ 2016-02-09 12:17 UTC (permalink / raw)
To: linux-arm-kernel
On 3.2.2016 13:41, Nathan Rossi wrote:
> Setup the USB controller and configure it to operate in host mode.
> Additionally add the USB phy node for the ZYBO, including reset gpio
> which is connected to a external MIO pin.
>
> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Michal Simek <michal.simek@xilinx.com>
> Cc: S?ren Brinkmann <soren.brinkmann@xilinx.com>
> ---
> arch/arm/boot/dts/zynq-zybo.dts | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts
> index 16c9cac..8f085b3 100644
> --- a/arch/arm/boot/dts/zynq-zybo.dts
> +++ b/arch/arm/boot/dts/zynq-zybo.dts
> @@ -33,6 +33,11 @@
> stdout-path = "serial0:115200n8";
> };
>
> + usb_phy0: phy0 {
> + #phy-cells = <0>;
> + compatible = "usb-nop-xceiv";
> + reset-gpios = <&gpio0 46 1>;
> + };
> };
>
> &clkc {
> @@ -56,3 +61,9 @@
> &uart1 {
> status = "okay";
> };
> +
> +&usb0 {
> + status = "okay";
> + dr_mode = "host";
> + usb-phy = <&usb_phy0>;
> +};
>
Applied.
Thanks,
Michal
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-02-09 12:17 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-02-03 12:41 [PATCH] ARM: dts: zynq: Enable USB and USB PHY for ZYBO Nathan Rossi
2016-02-03 12:41 ` Nathan Rossi
[not found] ` <1454503265-20605-1-git-send-email-nathan-RujqobwCo1oIa9VG7nliCQ@public.gmane.org>
2016-02-09 12:17 ` Michal Simek
2016-02-09 12:17 ` Michal Simek
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.